FLEET O VERVIEW

Transcription

FLEET O VERVIEW

JAN 2016
FLEET OVERVIEW
PIPELINE SERVICES & CAPABILITIES OVERVIEW
Specifications subject to changes without notice
PIPELINE OPERATIONS
PIPELINE
• Up to 60” Total Outer Diameter
• Up to 38 s ton (35 m ton) Pipe Joints
• Water Depth Operating Range <7’ to ~1,000’ (2.1m – ~300m)
• Can accommodate 40’ (12.1m) to 60’ (18.2m) pipe joints
• Pipelay – Single, Dual, Triple & Quad Pipeline Bundles
• Pre-Commissioning & Hydrotesting
• Riser, Spools, Subsea Assembly & Single/Dual Hot Tap Tie-ins
• Shore Approaches & Horizontal Directional Drilling (HDD)
• Casing/Crossing Pulls, “J” & “I” Tube Pulling & A/R:
• 4.25”Ø wire Traction Winch – 1,000 Kips (500st) single line pull
o
Wire capacity 4.25”Ø x 12,000 feet
• 3.5”Ø wire Lucker Wire Puller – 600 Kips (300st) single line pull
o
Wire capacity 3.5”Ø x 6,500 feet
• Winches up to 550 Kips (275st) pulling capacity – up to 2.75”Ø x 5,500 feet
• Pipeline Repair, Abandonment & Reverse Lay
• Steel and High Density Poly Ethylene (HDPE)
• Spooled Umbilical & Cable Lay
PIPELINE BURIAL & EXCAVATION
• Burial of up to 72” total Outer Diameter Pipelines
• Burial of Active & Inactive Pipelines
• Trenching to -25’ (7.62m) Below Mud Line (BML) to “Bottom of Ditch”
• Self Propelled Burial Sled For “Active In Service” Pipeline Burial
• Self Propelled Pipeline Excavation Sleds
• Bi-Directional Sled Operations
• High Pressure / High Performance – Portable 9 Stage Jet Pumps to 2,500 PSI
• Successful Excavations to >100’ (30.48m) BML in Water Depths >300’ (91.4m)
OFFSHORE SURVEY
• “As Built” & “As Laid” Surveys
• Position, Anchor Plot & Anchor Verification Surveys
• Anomaly Avoidance & Mapping Surveys
* Project parameters will dictate specific asset limitations
**Subject to project parameters, lay stress analysis & environmental conditions
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
PIPELAY BARGE & SUPPORT FLEET OVERVIEW
PIPE LAYBARGES:
TIE-IN & BURIAL ASSETS:
BISSO IROQUOIS - 400’ x 100’ x 30’
•
•
•
•
•
BISSO SUBSEA VISION - 415’ x 100’ x 25’
440 kip system with A&R
Pipe OD - 4” up to 60”
10 point mooring
Pipelay depth ~13 down to 1,000’
256 bunks
• 12 Man - 1,000’ ABS Classed Sat System, IMCA
DO24 compliant
HRC, 3 Man Bell via Moon Pool
• Surface Air & Gas, IMCA DO23 compliant
• 300 ton main crane
• 40 ton aux crane
• 50 ton davits available
• 84 bunks
L/B SUPER CHIEF - 265’ x 72’ x 16’
•
•
•
•
•
7 point mooring
Pipelay depth from ~10’ down to 500’
91 bunks
DSV JOSEPH BISSO - 180’ x 44’ x 15’
•
•
•
•
PIPELINE OPERATIONS
L/B MIGHTY CHIEF - 196’ x 76’ x 11’
•
•
•
•
•
7 point mooring
Lay depth from >7’ down to 200’
62 bunks
Surface Air & Gas, IMCA DO23 compliant
4 pt Mooring
30 ton crane
36 bunks
PORTABLE BURIAL ASSETS:
SPUD SUPPORT BARGE:
BIG EAGLE - 155’ x 50’ x 12’
Min draft 3’ – no crane
Min draft 4.5’ – with Manitowoc 3900, 120’
boom
• 4 point mooring
• 2 Spuds - 30” x 70’ (water depth 3’ to 50’)
• Deck crane – project specific
• Advanced Burial & Backfill Plough
• Portable Jet Pump Systems:
o (4) 1,500 GPM @ 2,500 PSI
o (3) 2,800 GPM @ 1,150 PSI
o (2) 3,000 GPM @ 300 PSI
• Single stage conventional drag sleds
• Dual stage conventional drag sled
• Self-propelled burial sled
• Airlifts, Dredge Pumps & Rock Dumping
PIPELINE BURIAL & EXCAVATION OVERVIEW
• Bury or Expose > 60” Diameter Concrete Coated Pipelines
• Turbidity Mitigation
• Overcome Very High Vane Shear, Hard Pan, Glacial Till Soils, High Plasticity Clays & Sugar Sandy
Conditions
• Water Depth Range – Beach to >1,000’ (0m – >300 m)
•
Bury or Expose – Single, Dual, Triple & Quad Pipeline Bundles
•
Umbilicals and Cables
•
•
•
•
•
•
•
•
•
•
•
Advanced Burial & Backfill Pipeline Plough
Pre-Trenching & Post-Trenching
Bury or Expose Active & Inactive Pipelines
Trenching to > -20’ (6m) Below Mud Line (BML)
Conventional Single & Dual Stage Pull Sleds
Self Propelled Burial Sled For “Active” Pipeline Burial
Self Propelled Pipeline Excavation Sled
Bi-Directional Sled Operations
High Pressure/High Performance Portable Jet Pumps
Successfully Excavated >100’ (30.48m) below the seafloor in Water Depths >300’ (91.4m)
Portable Systems Deployed From Anchored or DP2 Asset of Availability
OFFSHORE SURVEY – POST BURIAL
• “As Built” Surveys
• Position and Anchor Plot Surveys
• Mapping Survey
PIPELINE BURIAL & EXCAVATION SYSTEMS
Pipeline burial & excavation portable high pressure and high volume packages can be deployed worldwide and
used from BISSO MARINE assets or local vessels of availability; the supporting asset can be conventionally
moored or dynamically positioned.
Since most major international pipelay contractors do not have burial capabilities on-board their pipelay
barges or vessels. BISSO MARINE can perform stand alone burial projects as a subcontractor to support large
diameter pipelay operations performed by other contractors.
Other non-pipelay specific BISSO MARINE barges and vessels or third party assets can be outfitted with the
portable high pressure and high volume packages, tools and sleds to support any pipeline burial or excavation
project.
The environmentally friendly BISSO MARINE Advanced Burial and Backfill Pipeline Plough is a uniquely
designed to be a Pre-Trenching, Post-Trenching Burial and Backfill plough mitigating turbidity, seafloor or
water column impact. This unique design uses a singular chassis for two very different functions which
reduces the footprint, weight and expense of mobilizing two different ploughing tools: one for burial and a
separate for backfill.
The BISSO MARINE laybarges have on-board jetting systems for most burial requirements. In more challenging
cases, the BISSO MARINE laybarges can be supplemented by the portable high pressure and high volume
packages for deeper waters, deeper burial, high vane sheer soils or sugar sandy conditions.
The conversion between the two different functions is easily done in about 72 hours at or near the work site
by first placing the plough on the deck of a barge, vessel or at a shoreside facility; then by removing the plough
share and mouldboard unit and installing the two backfill blades.
The plough can rapidly be transported worldwide by ship or moved by tug and barge. During a project the
plough can be transported on the deck of a materials barge and handled by an attending lift vessel. The
plough is installed on a pipeline with diver or ROV assistance and observation. Once the plough is safely on a
pipeline, all operations are remotely controlled via an umbilical using electronic monitoring and operational
control systems to monitor plough shares position, towing/pulling forces, pitch, roll, water depth, trench
depth, vertical and horizontal forces on the pipeline, pipeline tracking, Mesotech and system diagnostics.
DERRICK BARGE SERVICES &
CAPABILITIES OVERVIEW
OFFSHORE CONSTRUCTION
• Single derrick barge lifts up to 800 short tons (in air)
• Multi derrick barge lifts up to 2,100 short tons (in air)*
• Water Depth Range <7’ to ~500’ (2.1m – 152.4m)*
• Offshore Facility Installation & Decommissioning
• Offshore Facility Maintenance, Modification & Repair
• Piledriving and Piling & Conductor cutting (internal & external)
SUBSEA/SURFACE – LIFTING, LOWERING & PULLING
• Up to 7,500 short tons capacity*
• Single Line Pull Winches up to 1,000 Kips
• Chain Pullers up to 660 kips
• Pulling Blocks up to 1,200 kips
DERRICK BARGE
OPERATIONS
EXCAVATION & SALVAGE
• Subsea excavation to -1,000’ water & > -100’ below mudline (BML)*
• Salvage & Wreck Removal – Open Ocean, Coastal & Inshore
HEAVYLIFT
•
•
•
•
•
•
•
Thruster Swap – Deepwater Drilling Ships & Semi-Submersibles*
“Blowout Preventer” loading & offloading at offshore locations*
Shoreside Fabrication - Load Out & Load In
Shipyard & Shipbuilding Industry Support
Shipping & Cargo Transfer
Civil Construction (Bridge Spans, Flood Gates & Lock Gates)
Government & Infrastructure Emergency Response
ACCOMMODATIONS & FLOATEL
• Offshore project support up to 256 bunks
*Subject to specific project parameters & environmental conditions
DERRICK BARGE OVERVIEW
DIVE SUPPORT ASSETS:
D/B BISSO 800
• ABS Classed
• 800 short ton (st) capacity @ 75’ from stern
• Main Block Lowering - 800 st -100’ subsea
• Main boom 200’
• Aux Cranes – (2) 135 st @ 30’Ø – Boom 160’
• Hull 300’ x 90’ x 18.5’
• Bunks – 54 (as configured, can expand)
DERRICK BARGE
OPERATIONS
D/B CAPPY BISSO
• ABS Loadline
• 700 st capacity @ 50’ from stern
• Main Boom 155’
• Hull 200’ x 70’ x 14’
D/B LILI BISSO
• ABS Loadline
• 600 st capacity @ 60’ from stern (no jib)
• 540 st capacity @ 60’ from stern (with jib)
• 300 st capacity @ 120’ from stern - jib
• Main Boom 155’ + Jib 40’
• Hull 195’ x 72’ x 12’
BISSO SUBSEA VISION
• ABS Classed
• 260 st Revolving @ 40’Ø (20’ outreach from port)
• Main boom 180’
• Aux Crane – 61 st @ min Ø – Boom 100’
• Hull 415’ x 100’ x 25’
• Bunks 100 (as configured, can expand)
D/B BOAZ
• ABS Classed
• 250 st Revolving @ 35’ outreach
• Main boom 180’, aux 210’, whip 230’
• 80 st Aux Revolving @ 65’ outreach
• Hull 250’ x 76 x 17’ - Fitted with anti-rolling chocks
D/B BISSO 350
• Lloyds Registry Classed
• 385 st @ 15’ from stern
• 270 st Revolving @ 23’ from stern
• Main boom 164’, aux 180’, whip 196’
• 165 st Aux Revolving @ 57’ from stern
• Hull 250’ x 78’ x 18’ - Fitted with anti-rolling chocks
CLASSIFICATION:
ABS All Oceans
 A1 Barge Classed # 7306063
BISSO IROQUOIS
DIMENSIONS:
Length with Stinger
Hull Length
Width:
Depth:
580 ft / 176.7 m
400 ft / 126.5 m
100 ft / 30.4 m
30 ft / 9.14 m
QUARTERS:
256 bunks
Client Offices
Meeting Rooms, Lounge, Theater, Gym
Hospital – 3 beds
Galley Seating - 100
CAPACITIES:
Pipe Storage:
4,800 ft2 / 445.9 m2
Deck Cargo Capacity: 5,000 t / 5,080 mt
Fuel:
534,428 gal / 1,631.3 t
Potable Water:
60,000 gal / 227 m3
Water Maker:
1,200 gal/hr / 3.66 t/hr
Ballast Water: 1,489,206 gal / 4,545.8 t
ELECTRONICS:
SAT TV, Voice, VHF, Wx
Fax & Data, Radar, SSB
GENERATORS (ship’s power): 7,500 kW
MAXIMUM WORKING DEPTH:
1,000 ft / 300 m
MAIN CRANE:
American R-40 250 st / 226.8 mt @ min. radius
Center of radius to stern
70 ft / 21 m
Center of radius to side shell
50 ft / 15 m
Main Boom
175 ft / 53 m
AUXILIARY CRANE:
Manitowoc 4100W S2
Boom
134 st / 121 mt
110 ft / 34 m
PIPELAY EQUIPMENT :
Up to 60” Total Ø Including Coating
Up to 38.5 s ton (38.5 m ton) Pipe Joints
Work Stations:
(4) Welding, (1) X-Ray, (1) Sand Blast, (2) Field Joint
(2) Pipe Tensioners:
440 kips A&R Winch:
440 kips Total
3” x 5,000’ / 76mm x 1,524 m
STINGERS:
(1) Section Rigid Ladder
(2) Section Rigid Truss
(5) Section Alpha Pontoon
DAVITS:
HELIDECK:
110 ft / 33.52 m
185 ft / 56.38 m
300 ft / 91.44m
(5) 75st (68mt) Hydraulic Chain
9,700 lb rated (Sikorsky S-76)
60 ft x 60 ft / 18.2 m x 18.2 m
MOORING:
(10) Points
5,300 ft x 2.5” / 1,516 m x 63.5 mm Per Drum
Pull Rating:
Brake Holding Power:
320 kips
744 kips
Line Speed:
High Speed – 180 ft/min / 54.8 m/min
Low Speed – 80 ft/min / 24.3 m/min
ANCHORS:
Flipper Delta & Bruce FFTS
Up to 16.5 st / 15 mt
PORTABLE PIPE BURIAL EQUIPMENT:
Conventional Pull Style Sleds & Self-Propelled Sled
Burial to -20 ft / 6m – bottom of ditch
Project Specific Portable Jet Pumps (available):
Up to 20,000 GPM
Up to 2,500 PSI
Advanced Burial & Backfill Plough
MAIN CRANE:
AMERICAN R-40 Dynamic Revolving
STINGERS:
(2) SECTION RIGID TRUSS STINGER
BISSO IROQUOIS
LOAD CHART & STINGER ARRANGEMENTS
FLOATING ALPHA PONTOON
Capacity up to 60”Ø Pipe / 38.5 s ton (35 m ton) Joints
DIMENSIONS:
Length (with apron):
Width:
Depth:
415 ft /126.5 m
100 ft / 30.4 m
25 ft / 7.6 m
CLASSIFICATION:
ABS All Oceans
 A1 Barge Classed # 7703417
BISSO SUBSEA VISION
QUARTERS:
84 as configured
Up to 140 (using additional portables)
Client Office, Client Room
Meeting Rooms, Lounge
Infirmary
Galley Seating - 48
CAPACITIES:
Pipe Storage:
4,250 ft2 / 394.8 m2
Deck Cargo Capacity: 5,000 t / 5,080 mt
Fuel:
149,000 gal / 475.6 t
Potable Water: 428,400 gal / 1,621.6 t
Water Maker:
700 gal/hr / 2.65 t/hr
Ballast Water: 2,863,413 gal / 10,839.2 t
ELECTRONICS:
GENERATORS (ship’s power):
(2) 800 KW
MAXIMUM WORKING DEPTH:
Pipelay: 500 ft / 152.4 m
Diving: 1,000 ft / 300 m
MAIN CRANE:
Seatrax S 12632 - 300 st / 272.1 mt @ min. radius
Center of radius to portside: 19 ft / 5.79 m
180 ft / 55 m Main Boom
AUXILIARY CRANE:
Manitex 4800 - 61 st / 55.3 mt @ min. radius
Center of radius to portside: 14 ft / 4.2 m
100 ft / 30 m Main Boom
SATURATION DIVING SYSTEM:
12 man - 1,000 ft (300 m) ABS Classed
(2) DDC - 6 man each
(1) 12 man HRC
(1) 3 man diving bell - Moon pool launch
Gas reclaim system
*Full Sat System specs available upon request
HELIDECK:
12,000 lb rated (Sikorsky S-76)
48 ft x 48 ft / 14.6 m x 14.6 m
MOORING:
(8) Points (up to (12) points available)
Stall Rating: 300 kips
Brake Holding Power: 450 kips
Line Speed:
Max – 840 FPM / 256 MPM
Min – 80 FPM / 24 MPM
5,100 ft x 1.75” / 1,554 m x 44 mm Per Drum
Anchors: Flipper Delta & Bruce FFTS
Up to 14 st / 13 mt
PORTABLE PIPELAY EQUIPMENT AVAILABLE:
Up to 42” Including Coating
Work Stations: (3) Welding, (1) X-Ray, (1) Field Joint
Pipe Tensioner: 80 kips
A&R Winch: 100 kips
Stinger Length: 100 ft / 32.8 m Ladder
(4) Davits: 50st (45mt) Hydraulic Boom
Up to 20,000 GPM
Up to 2,500 PSI
BISSO SUBSEA VISION
LOAD CHART
BISSO SUBSEA VISION
SEATRAX LOAD CHART
Max Rotating Lift Capacity @ 40’/12m - 261.14 st / 230.5 mt
Max Hook Height @ 40’/12m – 180’/55m
DIMENSIONS:
Length (with apron):
Width:
Depth:
QUARTERS: 91
Sick Bay: (1) 2 man
265 ft / 80.7 m
72 ft / 21.94 m
16 ft / 4.9 m
L/B SUPER CHIEF
CLASSIFICATION:
US Flag
USCG COI
ABS CLASSED # 9938791
Keel laid 1999 / converted 2007 / upgraded 2014
CAPACITIES:
Fuel:
Water:
Ballast:
138,150 gal / 441 t
153,500 gal / 581 t
300,020 gal / 1,135 t
ELECTRONICS:
Full Gyro Positioning Survey Equipment, Mesotech
SAT TV, Voice, Wx & Data, Radar, SSB
(1) 1000 KW, (1) 800 KW, (1) 150 KW
WELDING MACHINES:
(8) Miller 400 AMP DC
DECK CRANE:
Manitowoc 4100W S2 - Boom Length 120 ft / 36.6 m
98 st @ 32 ft radius - working limit (8) parts
88.9 mt @ 9.75 m radius - working limit (8) parts
HYDRAULIC CRANE:
Nautilus 40-2-70 (Bow):
Main 7 st / 6 mt @ 60 ft/ 18.2 m radius
Aux 2.9 st / 2 mt @ 70 ft / 21.3 m radius
MOORING:
(7) Points: 4,000 ft x 1.5” / 1,219 m x 38 mm Per Drum
Brake Holding Power: 225 kips (2nd layer)
Line Speed:
Max – 400 fpm / 121 mpm
Anchors: Delta Flipper & Bruce FFTS
Up to 14 st / 13 mt
COMMON PIPE SIZE STORAGE AMOUNTS:
14” - 353 Joints (14,106 ft / 4,300 m)
12” - 480 Joints (19,200 ft / 5,852 m)
10” - 691 Joints (27,648 ft / 8,427 m)
8” - 1,080 Joints (43,200 ft / 13,167 m)
6” - 1,920 Joints (76,800 ft / 23,409 m)
4” - 4,320 Joints (172,800 ft / 52,669 m)
PIPELAY EQUIPMENT:
Work Stations: (3) Welding, (1) X-Ray, (1) Field Joint
Pipe Tensioner: Up to 100 kips
A&R Winch: Up to 100 kips
Stinger Length: 55 ft / 26 m (Standard)
(Project specific stinger design available)
PIPE BURIAL EQUIPMENT:
Internal Hull Mounted Jet Pumps:
Total Output: 6,400 GPM @ 725 PSI
(2) MSD-D 2 Stage Bingham 10 x 12 x 19A
Up to 20,000 GPM
Up to 2,500 PSI
DIMENSIONS:
Length:
Width:
Depth:
Min. Draft:
196 ft / 59.7 m
76 ft / 23.1 m
11.5 ft / 3.5 m
6 ft /1.8 m
QUARTERS:
Up to 62
CLASSIFICATION:
US Flag
USCG COI
ABS X A1 Barge: Classed # 7715157
L/B MIGHTY CHIEF
CAPACITIES:
Fuel:
Water:
Ballast:
49,920 gal / 159 t
109,824 gal / 4,543 t
65,208 gal / 246 t
DECK CRANE:
Manitowoc 3900 - Boom Length 120 ft / 36.6 m
MOORING:
(7) Points: 4,000 ft x 1.25” / 1,219 m x 31 mm Per Drum
Line Speed:
Max – 328 fpm / 100 mpm
Anchors: Delta Flipper Up to 3.25 st / 2.9 mt
PIPELAY EQUIPMENT:
Work Stations: (2) Welding, (1) X-Ray & Field Joint
Pipe Tensioner: Up to 50 kips
Stinger Length: 40 ft / 12.2 m (Standard)
(Project specific stinger design available)
ELECTRONICS:
(3) 350 KW, (1) 125 KW
WELDING MACHINES:
(8) Miller 400 AMP DC
COMMON PIPE SIZE STORAGE AMOUNTS:
12” - 250 Joints (10,000 ft / 3,048 m)
10” - 360 Joints (14,400 ft / 4,389 m)
8” - 563 Joints (22,520 ft / 6,864 m)
6” - 1,000 Joints (40,000 ft / 12,192 m)
4” - 2,250 Joints (90,000 ft / 27,432 m)
(SCAN QR CODE WITH SMART PHONE FOR LINK TO PIPELAY ANIMATION)
Internal Hull Mounted Jet Pumps:
Total Output:7,000 GPM @ 442 PSI each
(2) Sulzer Single Stage (3,500 GPM @ 442 PSI each)
Up to 20,000 GPM
Up to 2,500 PSI
DIMENSIONS:
Length:
250 ft / 76.2 m
Width:
76 ft / 23.1 m
Depth:
17 ft / 5.1 m
Hull fitted with anti-roll chocks on bilge knuckles
QUARTERS: Bunks 58 (as configured, can expand)
CLASSIFICATION:
US Flag
USCG COI
ABS CLASSED # 7600332
Built 1999 / converted 2004 / upgraded 2014
14,210 gal / 45 t
CAPACITIES:
379,236 gal / 1,435 t
Fuel:
464,236 gal / 1,757 t
Water:
Ballast:
MOORING:
(4) Points: 3,600 ft x 1.75” / 1,100 m x 44.4 mm Per Drum
Line Speed:
Max – 400 fpm / 121 mpm
Up to 14 st / 13 mt
D/B BOAZ
JETTING SYSTEMS:
Portable Jet Pumps (available):
(3) Union 6 x 10 x 13 MQF 4 Stage
(2,800 GPM @ 1,150 PSI ea)
(2) Patterson 10 x 10 DMD 2 Stage
(3,000 GPM @ 300 PSI ea)
Air Compressors: as required
(2) 400 KW / 500 KVA
(1) 125 KW / 156 KVA
DECK CRANE:
Manitowoc 3900 or 4000
Boom Length 120 ft / 36.6 m
HELIDECK:
40’ x 40’ / 12.1m x 12.1m
6000 lbs / 2.7 mt
ELECTRONICS:
D/B BOAZ
LOAD CHART
DIMENSIONS:
250 ft / 76.2 m
Length:
78 ft / 23.77 m
Width:
18 ft / 5.5 m
Depth:
Hull fitted with anti-roll chocks on bilge knuckles
QUARTERS: Bunks 64 (as configured, can expand)
CLASSIFICATION:
Panamanian Flag
Lloyds Registry
Built 1974 / converted 2009
CAPACITIES:
Fuel:
Water:
Ballast:
35,187 gal / 112 t
39,097 gal / 148 t
642,730 gal / 2,433 t
ELECTRONICS:
MOORING:
Line Speed:
Max – 400 fpm / 121 mpm
Up to 14 st / 13 mt
D/B BISSO 350
JETTING SYSTEMS:
(2,800 GPM @ 1,150 PSI ea)
(3,000 GPM @ 300 PSI ea)
(3) 224 KW / 330 KVA
DECK CRANE:
Manitowoc 3900 or 4000
Boom Length 120 ft / 36.6 m
D/B BISSO 350
LOAD CHART
DIMENSIONS:
Length:
Width:
Depth:
Min Draft:
300 ft / 91.4 m
90 ft / 27.43 m
18.5 ft / 5.63 m
10 ft / 3m
CLASSIFICATION:
US Flag
USCG COI
ABS  A1 Barge Classed # 8300379
CAPACITIES:
Fuel:
Water:
Ballast:
48,000 gal / 153 t
104,000 gal / 393 t
1,092,000 gal / 4,133 t
ELECTRONICS:
Full Gyro Positioning Survey Equipment,
Mesotech, SAT TV, Voice, Wx & Data, Radar,
SSB
GENERATOR:
(2) 500 KW / 625 KVA, (1) 150 KW / 187.5 KVA
MOORING:
Line Speed:
Max – 400 fpm / 121 mpm
D/B BISSO 800
Up to 14 st / 13 mt
JETTING SYSTEMS:
(2,800 GPM @ 1,150 PSI ea)
(3,000 GPM @ 300 PSI ea)
BOW CRANES:
(2) American 11750
Boom: 160 ft / 48.8 m
Max Capacity: 140 st / 127 mt
HELIDECK:
6,000 lbs 48 ft x 36 ft / 2.72 mt 14.6 m x 11m
D/B BISSO 800
LOAD CHART
DIMENSIONS:
Length:
Width:
Depth:
Min Draft:
Min Air Draft:
200 ft / 60.69 m
70 ft / 21.33 m
14 ft / 4.26 m
6 ft / 1.82m
40 ft / 12.19m
CLASSIFICATION:
US Flag
ABS LOADLINE #7615539
Built 1976
GENERATOR:
40 KW
STERN BOLSTER;
551 st / 500 mt
D/B CAPPY BISSO
CHAIN PULLER STERN LIFT/CUTTING:
330 st / 300 mt
TRANSITING UNDER 40’ BRIDGE
STERN BOLSTER USED FOR CUTTING OPERATIONS
D/B CAPPY BISSO
LOAD CHART
DIMENSIONS:
Length:
Width:
Depth:
Min Draft:
CLASSIFICATION:
US Flag
Built 1987
GENERATOR:
40 KW
D/B LILI BISSO
STERN BOLSTERS;
(2) 300 st / 272 mt
195 ft / 59.4 m
72 ft / 21.9 m
12 ft / 3.6 m
6 ft / 1.8m
D/B LILI BISSO
LOAD CHART
DIMENSIONS:
Length:
Width:
Depth:
180 ft / 54.8 m
44 ft / 13.4 m
15 ft / 4.5 m
QUARTERS:
Vessel Crew: 9
Industrial Personnel: 27
DSV JOSEPH BISSO
CLASSIFICATION:
ABS All Oceans X A1, AMS Classed # 7905104
IMO # 7819656
USCG COI
BUILT/CONVERTED:
1979 / 2007
FLAG:
USA
MAIN ENGINES:
(2) EMD 12-345-E2 (3,000 BHP total)
BOW THRUSTER:
GM 8V71 (300 BHP)
GENERATORS:
(3) GenSets
450KW Total Available Power
CRANE:
Techcrane T60-56-100
30 st / 27.2 mt (Static)
CLEAR DECK:
107 ft x 33 ft / 32.6 m x 10 m
ELECTRONICS:
MOORING:
(7) Points: 4,000 ft x 1 in / 1,371.6 m x 25.4 mm per drum
Line Speed:
Max – 386 fpm / 117 mpm
ENDURANCE:
30 Days Towing
Fuel: 55,000 gal / 172.3 t
Fresh water: 135,300 gal / 512.1 t
(2) Water Makers
PIPELAY EQUIPMENT:
Work Stations: (1) Welding, (1) X-Ray/Doping
Pipe Tensioner: Brake System
Stinger Length: As Required
(2,800 GPM @ 1,150 PSI)
(3,000 GPM @ 300 PSI)
(1) 6 x 6 Jet Pump - 1,400 GPM @ 40 PSI
Air Compressors: As Required
DIMENSIONS:
Length:
Width:
Depth:
Min Draft:
QUARTERS:
Portables, project specific
FLAG:
SPUD BARGE
BIG EAGLE
155 ft / 47.2 m
50 ft / 15.2 m
12 ft / 3.6 m
~3 ft / <0.9m (bare barge)
~4.5 ft / 1.4m (with 175 st capacity crane)
USA
MOORING:
(4) 1,200 ft x 1.125 in / 366 m x 29 mm wire
Anchors, project specific
SPUDS:
(2) 30 in / 762 mm Ø (up to 70’ / 21.3 m)
Water Depth for Spuds
3 ft – 50 ft / 0.9 m – 15.2 m - depending on conditions
CRANE:
Project specific
SUPPORTING:
• Diving
• Marine Salvage
• Abandonment
• Construction
• Pipelay & Repair
• Pollution Clean Up
• Dredging
• Pile Driving
• Horizontal Directional Drilling
•
•
•
Inland operations
Coastal Operations
Near Shore Operations (within 12 miles)
PRE & POST TRENCH
PLOUGHING
PIPELINE PLOUGHING
PIPELAY BURIAL
SELF PROPELLED TRACK SLED
•
•
•
•
•
•
•
•
•
•
•
Crawls on Pipeline Using “Tensioner” Style Pads
Can Actively Pass Over an Anode, Will NOT Damage Coatings
Can Bury Active Pipelines
Bi-directional Travel at Controllable Speed
Designed For All Types of Soils
Pipe Range: 4” – 30”OD Inclusive of Coating
Can Achieve First Pass Depth of Up to 4 Feet
Can Be Adjusted For +16 Feet of Cover
On Board Electronic Pipe Monitoring Available
Anchored or DPII Deployment
Overall Dimensions:
•
14’ Long x 11.5’ Wide (At Widest Point) x 19’ Tall
•
Weight 26,000 lbs (Sled Only in Air)
(SCAN QR CODE WITH SMART PHONE FOR LINK TO SLED ANIMATION)
CONVENTIONAL PULL SLEDS
PIPELAY BURIAL
CONVENTIONAL PULL SLEDS
•
•
•
•
•
•
•
Designed to Deliver High Pressure Air & Water to Emulsify Seafloor Soils
Designed to Obtain the Standard Gulf of Mexico 3 Feet of Pipeline Cover
Pipe Range: 2” – 12” OD, Will NOT damage FBE Pipe Coatings
Can Be Adjusted For +16 Feet of Pipeline Cover
Can Be Used to “Uncover” Pipelines for Removal Operations
Dimensions and Weights vary by design
“DUAL STAGE” PULL SLED
PIPELAY BURIAL
“DUAL STAGE” PULL SLED – up to 2,500 PSI & 9,600 CFM
•
•
•
•
•
•
•
•
Designed to Deliver 2x High Pressure Jetting & Airlifting
Designed For High Volume Output and Fast Speed for Sugar Sand Burial
Pipe Range: 4” – > 60” OD Inclusive of Coatings
Can Achieve First Pass Ditch Depth of Up To 5 Feet (Depending on Soils)
Can Be Adjusted For +16 Feet of Cover
Narrow Version – Overall Dimensions
•
31’6” Long x 20’ Wide x 23’4” Tall
•
~50,000 lbs (Wet with Hoses) In Air
•
~34,000 lbs In Water
Wide Version – Overall Dimensions
•
31’6” Long x 40’ Wide x 35’Tall
•
~58,000 lbs (Wet with Hoses) In Air
•
~42,000 lbs In Water
(SCAN QR CODE WITH SMART PHONE FOR LINK TO SLED ANIMATION)
Portable Jet Pump Systems:
PORTABLE BURIAL PACKAGES
JET PUMP PACKAGES
(4) 1,500 GPM @ 2,500 PSI
(3) 2,800 GPM @ 1,150 PSI
(2) 3,000 GPM @ 300 PSI
EXCAVATION TOOLS
AIR LIFTS, JET STRINGS and PUMPS
EXCAVATION TOOLS
Custom Engineered and Designed For Specific
Project Requirements.
Designs from:
3” (76 mm) - 30” (760mm) Diameter
Up to 80’ (24.3 m) Long
Major excavations have been performed to -110’
(-33.5m) Below Mud Line @ -320’ (-97.5 m) Water
Depth
MESOTECH SONAR VERIFICATION
BURIAL & EXCAVATION SURVEY
PIPELINE SURVEY
AS-BUILTS, ANCHOR VERIFICATION & ANOMALY AVOIDANCE

FLEET O VERVIEW

Transcription

Similar documents

Track Carrier

WaterTurbineAppendix..

Here

Empalme Gas Pipeline Branch

An act of conservation/story on green burials

STRAINERS - Magnatrol Valve Corporation

Resist-All-Clad

Industrial Fabrics, Inc. - RockGuard Pipeline Protection Mesh

Samalayuca – Sasabe Gas Pipeline

CA and Rehab Brochure