CPIE 2016

Executive Patron
Shri Rajiv Mehrotra
Chairperson, Board of Governors, Dr B R Ambedkar NIT, Jalandhar, INDIA
Founder & Chairman, Shyam Telecommunications Group, & Vihaan Networks Limited, Gurgaon (Haryana)
Dr B R Ambedkar NIT, Jalandhar
CHIEF PATRON
ORGANIZING SECRETARIES
Dr Anish Sachdeva
Prof (Dr) S Ghosh
CONFERENCE CHAIRS
guptaa@nitj.ac.in
JOINT ORGANIZING SECRETARIES
Prof (Dr) Arvind Bhardwaj
Dr Rajiv Trehan
Dr S S Bhadauria
Prof R K Bansal
Dr Sarbjit Singh Bal
Dr Balwinder Raj
CO CONVENERS
CONVENER & HOD
Dr Vishal S Sharma
Dr L P Singh
sharmavs@nitj.ac.in
Advisory Council
Professor (Dr) Joseph Anand Vaz
Professor (Dr) Arvind Agnihotri
Professor (Dr) Arun K Khosla
Professor (Dr) N C Kothiyal
Professor (Dr) Jaspal Singh Aujla
Professor (Dr) A L Sangal
International Advisory Council
Prof I S Jawahir, University of Kentucky, USA
Prof Mustafizur Rahman, NUS, Singapore
Prof Gerard Poulachon, ENSAM Cluny, France
Prof Guillaume Fromentin, ENSAM Cluny, France
Prof Knut Sørby, NTNU, Norway
Prof Kesheng Wang, NTNU, Norway
Prof J Paulo Davim, University of Aveiro, Portugal
Prof Zhan W. Chen, Auckland University of Technology,
New Zealand
Prof. Bharat Bhushan, The Ohio State University, Columbus,
Ohio, U.S.A
Prof. Xun W Xu, University of Auckland, Auckland, New Zealand
Prof. M. Ramulu ,University of Washington, Seattle, USA
Prof. Deyi Xue, University of Calgary, Alberta, Canada
Prof Andrew Kusiak, The University of Iowa, USA
Prof Pedro - José Arrazola, Mondragon, Spain
Prof N G Alba Baena, UACJ, Mexico
Prof Bernard Hon, University of Liverpool,UK
Prof Francisco Lopez Jaquez, UACJ, Mexico
Prof. Dinesh Kumar Hurreeram, University of Mauritius
Prof Nikhil Ranjan Dhar, BUET, Bangladesh
Prof Sein L Soo, University of Birmingham, UK
Prof Uday Shanker Dixit, IIT, Guwahati, India
Prof L Vijayaraghavan, IIT, Madras, India
Prof Phil Koshy, McMaster University, Canada
Prof Narendra B. Dahotre, University of North Texas, USA
Dr Anshu Dhar Jayal, IIT , Ropar, India
Dr Alokesh Pramanik, Curtin University, Australia
Dr Chunming Jiang, Shanghai University, China
Dr Hussein Mohamed, Helwan University, Egypt
Special Journal Issues
Dr Ajay Gupta
asachdeva@nitj.ac.in
Director
Prof (Dr) R K Garg
Special issues comprising of the selected papers from
earlier CPIE's have been published in:
•International Journal of Machining and Machinability of
Materials, 2012 Vol. 12 No.1/2
•Journal of Manufacturing Technology Management,
2012, Vol. 23,Issue 7
•Journal of Manufacturing Technology and Management
2015 Vol. 26 No. 6
Prof Sushil, IIT, Delhi India
Prof Ahad Ali, Lawrence Technological University, USA
Prof. Harm-Jan Steenhuis, Hawaii Pacific University,
Honolulu, USA
Prof. M. Affan Badar, Indiana State University, USA
Prof Berna Ulutas, Eskisehir Osmangazi University, Turkey
Prof. David Bennett, Chalmers University of Technology, Sweden
Prof. Om Prakash Yadav, North Dakota State University USA
Prof Ravindra Goonetilleke, Hong Kong University of Science &
Technology, Hong Kong
Prof Christian N Madu, Pace University, USA
Prof Angappa Gunasekaran, University of Massachusetts, USA
Prof Yuval Cohen, The Open University of Israel, Israel
Prof M K Tewari, IIT Kharagpur, India
Prof Uday Kumar, Luleå University Technology, Sweden
Prof Doud Ait Kadi, Laval University Québec, Canada
Prof Pradeep Kumar, IIT Roorkee, India
Prof Dinesh Kumar, IIT Roorkee, India
Prof Yves Dutuit, University Bordeaux, France
Prof Jin Wang, Liverpool John Moores University, UK
Prof Kalyanmoy Deb, IIT Kanpur, India
Prof. Puneet Tandon, IIIT & DM, Jabalpur, India
Prof. Patrick A McLaren, Cape Peninsula University of Technology,
South Africa
Dr Akshay Dwivedi, IIT Roorkee, India
Dr Inderdeep Singh, IIT Roorkee, India
Dr Zilur Rahman, IIT Roorkee, India
Dr MN Qureshi, King Khalid University, Saudi Arab
Dr Kuldeep Ojha, UWI, Trinidad and Tobago, West Indies
Dr. Pulak M. Pandey, IIT Delhi.
Authors are invited to contribute their research on the
Following tracks for CPIE 2016. All papers shall be
published as full paper in the conference Proceedings
(with ISBN Number), and a few shall be forwarded to
reputed Journals for possible publication in special
issues from CPIE 2016. Following International Journals
have given their consent to come up with a special
issue:
Journal of Manufacturing Technology Management
(Emerald publications)
Advances in Manufacturing (Springer publications)
Journal of Manufacturing Technology Research (Nova
Publications)
Journal of Machining and Forming Technologies (Nova
Publications)
Journal of Nanoengineering and Nanomanufacturing,
American Scientific Publishers, USA.
Selected paper will be taken for
Global Journal of Flexible Systems Management
(Springer publications)
International Journal of Additive and Subtractive
Materials Manufacturing (Inderscience)
Conference Tracks
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Machining Conventional
Micro/ Nano /Non-Conventional Machining
Additive manufacturing
Casting and Forming
Joining Processes
Condition monitoring
Materials and Processing
Product Design and Development
Industrial Automation, CAD/CAM and Robotics
Non-Conventional Energy
Sustainability in Manufacturing
Reliability and Maintenance Engineering
Technology Change
Agile Manufacturing
Modeling and Simulation
Logistics and Supply Chain Management
Human Factors Engineering
Advanced Operations Management
Electronics & Computers in Industry
Other Allied Topics
National Advisory Council
Prof Ajay Kumar Sharma, NIT, Delhi
Prof Abid Haleem, JMI, New Delhi
Prof T P Singh, SIT, Pune
Prof R Srinidihi, SJCE, Mysore
Prof Inderpreet S Ahuja, Pbi Univ., Patiala
Prof Vinay Gupta, Pbi Univ., Patiala
Prof S S Banwait, NITTTR, Chandigarh
Prof Dixit Garg, NIT, Kurukshetra
Prof Ajay Batish, TU, Patiala
Prof T S Sidhu, SBSCET, Freozpur
Prof Sehij Pal Singh, GNEC,Ludhiana
Prof Sudhir Kumar, GNIT, Noida
Prof Rakesh Sehgal, NIT, Hamirpur
Prof Jasminder S Dureja, Pbi Univ., Patiala
Prof Pankaj Chandana, NIT, Kurukshetra
Prof PC Tewari, NIT, Kurukshetra
Prof M L Aggarwal, YMCA Univ. of Sc. & Tech., Faridabad
Prof G A Harmain, NIT, Srinagar
Prof Srinivas Pai P, NMAM Institute of Technology,
NITTE
Prof S K Sharma, formerly with NIT Kurukshetra
Prof Jagtar Singh, SLIET, Longowal
Prof C M Choudhari, FCR Inst. of Tech., Navi Mumbai
Prof Sunand Kumar, NIT, Hamirpur
Prof. Hari Singh, NIT, Kurukshetra
Prof. Sachin Maheshwari, NSIT, Delhi
Dr. R.K.Dwivedi, MANIT Bhopal
Dr Balvir Talwar, GDM, BHEL, Delhi
Dr Narendra Mohan Suri, PEC Univ., Chd.
Dr Dinesh Thakur, DIAT, Pune
Dr Manu Dogra, S S G Panjab Univ., Hsp.
Dr Harmesh Kansal, UIET, Chandigarh.
Dr R S Walia, DTU, Delhi
Dr Rajesh Sharma, NIT, Hamirpur
Dr Rajiv Kumar Sharma, NIT, Hamirpur
Dr Sant Ram Chauhan, NIT, Hamirpur
Dr P K Sood, NIT, Hamirpur
Dr Ravi Dwivedi, MNIT, Bhopal
Dr Tejeet Singh, SBSSTC, Ferozepur
Dr V K Tripathi, COE, Pune
Dr Ajay Aggarwal, College of Technology, Pantnagar
Dr Arun Choudhary, College of Technology, Pantnagar
Dr Shailender Kumar, SVNIT, Surat
Dr Pravin Rathod, Govt Engg. College ,Bhuj
Dr V Anandakrishnan, NIT, Tiruchirappalli
Dr Manjinder Singh, SBSSTC, Ferozepur
Dr Balwinder Sidhu, GZSSTC, Bathinda
Dr Sudhir Kumar, GNIT, Noida
Dr Rajesh Gupta, GZSSTC, Bathinda
Dr Vinod Kumar, Punjabi University, Patiala
Dr Vishwajit Singh, PAU, Ludhiana
Dr Harwinder Singh, GNDEC, Ludhiana
Dr Rupinder Singh Khalsa, GNDEC Ludhiana
Dr Harmit Singh, GNDEC Ludhiana
Dr Venkateswara Rao Komma, MNNIT Allahabad
Dr Rupinder Singh, GNDEC, Ludhiana
Dr Nirmal Singh Kalsi, BCET, Gurdaspur
Dr Dilbagh Singh, BCET, Gurdaspur
Dr Neel Kanth Grover, SBSSTC, Ferozepur
Scientific Council
Prof S P Singh
Prof S K Sinha
Dr Subhash Chander
Dr B S Saini
Dr Ajay Bansal
Dr N Bhowmick
Dr Rajeev Jindal
Dr B S Saini
Dr Vinay Midha
Dr R A Khan
Dr Harsh K Verma
Dr Raman Bedi
Dr Rajeev Kukreja
Dr Dinesh Shulka
Dr Pramod Kumar
Dr Jagwinder Singh
Dr S Bajpai
Dr Dilbag Singh
Dr Rohit Mehra
Dr Sarvan Pahuja
Dr R S Bharj
Dr S K Tiwari
Dr Ramesh K Sunkaria
Dr Netai Basak
Sponsorships
Government Departments, R&D Organizations, Academic Institutions, Industries, Publishers etc., are requested
to sponsor or co-sponsor the conference. The details of sponsorship fee are as follows:
Category
Gold Sponsors
Silver Sponsors
Bronze Sponsors
Partner (no limit)
Sponsorship Fee
Rs. 5,00,000/Rs. 3,00,000/Rs. 2,00,000/Rs. 50,000/-
The names of the sponsors/supporters will be recorded in the
proceedings of the conference and will be appropriately acknowledged
and displayed at the conference venue and conference website.
Ivth International Conference on
Production & Industrial Engineering
CPIE 2016
(19-21 December, 2016)
THE INSTITUTE
Dr. B R Ambedkar NIT Jalandhar, India (NITJ), is one of the premier institutes under Ministry of Human Resource
Development, Government of India. It was established in the year 1989 as Regional Engineering College Jalandhar &
was given the status of Dr. B R Ambedkar National Institute of Technology in Oct, 2002.
THE DEPARTMENT
The Department of Industrial and Production Engineering (IPE) at NITJ is one of the oldest departments at NITJ and
boasts an impressive record including over 200 papers contributed in various journals and conferences by the faculty
& students. For more information about the Institute and the department, visit: www.nitj.ac.in
JALANDHAR CITY
The city is amongst the important cities in the State of Punjab. It is close to famous Himalayan range, which attracts
tourists from all over the world. Jalandhar City is about 350 kms from National Capital, New Delhi. The nearest airport
is Raja Sansi Airport, situated at holy city Amritsar, which is about 80 kms away from the Conference Venue.
GLIMPSE OF CPIE 2007
Important Dates
Paper Submission Deadline
Notification of Paper Acceptance
Submission of Camera Ready Papers
Registration Deadline
:
:
:
:
1st November 2016
10th November 2016
20th November 2016
25th November 2016
Submission Guidelines
The paper should be prepared on A4 sheet with 1” margin on all sides. The paper should include authors name,
affiliations and mailing address. For more details about submission click at our website: www.cpie.ind.in
GLIMPSE OF CPIE 2010
Registration Fee
Registration on or before 25th November 2016
Indian
Foreign
Industry Participant
Rs 5,000
USD 300
Academic Participant *
Rs 4,000
USD 250
Student
Rs 2,500
USD 150
-
The delegates can opt for regular presentation or poster presentation. However the all papers will be published
as full papers on CD with ISBN number along with abstracts booklet. Maximum two articles could be
contributed on a single registration.
- The registration fee includes registration kit, copy of conference proceedings, working lunches, session tea and
conference dinner.
 Excursion trip to holy city Amritsar and Indo-Pak Border (Wagah Border) shall be arranged on payment basis.
Mode of Payment
Electronically to: Account Name:CPIE
CNRBINBBBMC
Account Number: 2945101002372
IFSC code: CNRB0002945
MICR Code: 144015011
Name of Bank: Canara Bank, NIT Jalandhar 144011, India
Or Demand Draft in favour of CPIE payable at Jalandhar
Swift Code:
GLIMPSE OF CPIE 2013
Organized by
Department of Industrial and Production Engineering
Dr B R Ambedkar National Institute of Technology
Jalandhar-144011, Punjab, INDIA
Institute Website: www.nitj.ac.in
Conference Website: www.cpie.ind.in
E-mail: cpie@nitj.ac.in