Knives Illustrated - April 2014 USA

Transcription

KI-1404-COVER 2/7/14 4:40 AM Page US_C1
knivesillustrated.com
MARCH/APRIL 2014 • DISPLAY UNTIL: 4/22/14
VOLUME 28, NO.2 • $5.99 U.S.
04
0
71658 03124
1
Engaged Media By Beckett
KI_1404_C2 2/6/14 10:34 PM Page C2
Ready whenever you are,
wherever life takes you.
Carbon Fiber Case Knives
The unparalleled combination of strength and
feather-light weight of Carbon Fiber has made it one
of the most favored reinforced polymers for many of
today’s high-tech industries, from sporting goods to
automotive and even aerospace.
Now Case brings you Carbon Fiber pocket knives –
tough tools that are up to 40% lighter than their
bone or synthetic handled counterparts. Seven handy
patterns make up the Case Carbon Fiber family,
each with satin finished Tru-Sharp™ surgical
steel blades that are ready for heavy
duty work.
Available at Case dealers everywhere.
BackPocket®
#42945
Knives not shown at full scale.
Additional models available
Sod Buster, Jr.®
#42941
Trapper
#42940
Lockback
#42942
Medium Stockman
#42946
www.wrcase.com | www.facebook.com/wrcase
Folding Hunter
#42947
Sod Buster
#42943
KI_1404_3 2/6/14 10:36 PM Page 3
SANTI
D2 - MSRP: $121
AUS-8 - MSRP: $104
Multi-National Designs, Made in Russia
Kizlyar Supreme utilizes the highest tech processes and materials available today to produce superior performance knives.
They are backed by a multinational team of talented designers
and engineers from Russia, Germany, Australia and Japan.
See the full line of high-quality knives at http://casiberia.com.
BIKER Z
DELTA
VENDETTA
http://casiberia.com | (800) 635-9366
KI-1404-4-6-TOC.CX 2/10/14 4:27 AM Page 4
MARCH/APRIL 2014
VOLUME 28, NO. 2
www.knivesillustrated.com
34
SPECIAL SECTION:
THE BEST OF SHOT
48 The hottest new products from
W.R. Case, Spyderco, CRKT and
more, including:
•
•
•
42
Trending: Aggressive bushcraft blades
The best collaborations with custom designers
Multifunctional knives and tools
63
FEATURES
1 8 Carving Their Place
How young company Behring Made found
fast success in the knife world
BY CHRIS LA TRAY
26 Ultimate Durability
KA-BAR’s Crewman offers first-rate durability
for military and everyday users alike
BY CLINT THOMPSON
34 Survival of the Fittest
Buck’s expert-designed Hood Thug withstands
the toughest tasks
BY JIM WEISS & MICKEY DAVIS
KNIVES ILLUSTRATED (ISSN 0898-8943) Vol. 28, No. 2
is published 7 times a year, January/February,
March/April, May/June, July/August, September/
October, November and December, by Beckett Media,
LLC, 22840 Savi Ranch Parkway, #200, Yorba Linda, CA
92887. Periodical postage paid at Anaheim, CA, and
additional mailing offices. POSTMASTER: send address
changes to Knives Illustrated c/o Beckett Media, 4635
McEwen Road, Dallas, TX 75244. Return undeliverable
Canadian addresses to: PITNEY BOWES, INC, P.O. Box
25542, London, ON N6C 6B2 GST#855050365RT001 ©
2014 by Beckett Media, LLC. All rights reserved.
Reproduction of any material from this issue in whole or
in part is strictly prohibited.
4
KNIVES ILLUSTRATED • MARCH/APRIL 2014
69
KI_1404_5 2/6/14 10:38 PM Page 5
KI-1404-4-6-TOC.CX 2/10/14 4:27 AM Page 6
18
MARCH/APRIL 2014
Volume 28 • Number 2
EDITORIAL
Editorial Director: Doug Jeffrey
Editor: Bethany Miller
Managing Editor: Jeffrey Rick
Art Director: Ronald Abella
Creative Director: Eric Knagg
CONTRIBUTORS
Mickey Davis, Abe Elias, Terrill Hoffman, Clint Thompson,
Jim Weiss
ADVERTISING
Gabe Frimmel: Ad Sales Director (714) 200-1930
GFrimmel@beckett.com
David Beckler: Senior Account Executive (972) 448-9173
Casey Clifford: Senior Account Executive (717) 896-8956
Mark Pack: Senior Account Executive (714) 200-1939
Gennifer Merriday: Ad Traffic Coordinator
DIRECT MARKETING GROUP
John Bartulin (866) 866-5146 ext. 2746
Paul Caca (866) 866-5146 ext. 4961
Ryan Lauro (866) 866-5146 ext. 2756
Mary Ann Jaca (866) 866-5146 ext 2716
OPERATIONS
Gus Alonzo: Newsstand Sales & Marketing Manager
Celia Merriday: Newsstand Analyst
Amit Sharma: Business Analytics Manager
Mohit Patel: Newsstand & Production Analyst
Alberto Chavez: Senior Logistics & Facilities Manager
John Cabral: Creative Graphic Designer
COLUMNS
1 0 Points of Interest
The Latest Goings-On in the Knife World
1 4 Behind the Scenes
A Q&A with Fox Knives USA
42 In the Spotlight
The Best of Custom Blades
82 Show and Tell
Readers Show Off Their Favorite Knives
EDITORIAL, PRODUCTION & SALES OFFICE
22840 Savi Ranch Parkway, #200
Yorba Linda, CA 92887
(714) 939-9991
Fax: (800) 249-7761
facebook.com/knivesillustrated
facebook.com/eembybeckett
KNIVES ILLUSTRATED (ISSN 0898-8943) Vol. 28, No. 2 is published 7 times
a year, January/February, March/April, May/June, July/August, September/October,
November and December, by Beckett Media, LLC, 22840 Savi Ranch Parkway,
#200, Yorba Linda, CA 92887. Periodical postage paid at Anaheim, CA, and
additional mailing offices. POSTMASTER: send address changes to Knives
Illustrated c/o Beckett Media, 4635 McEwen Road, Dallas, TX 75244. Return undeliverable Canadian addresses to: PITNEY BOWES, INC,
P.O. Box 25542, London, ON N6C 6B2 GST#855050365RT001 © 2014 by
Beckett Media, LLC. All rights reserved. Reproduction of any material from
this issue in whole or in part is strictly prohibited.
50
CUSTOMER SERVICE
Beckett Media, LLC
4635 McEwen Road, Dallas, TX 75244
Subscriptions, Address Changes,
Renewals, Missing or Damaged Copies
(800) 764-6278
(239) 653-0225 Foreign Inquires
subscriptions@beckett.com
customerservice@beckett.com
Back Issues
www.engagedmediamags.com
Books, Merchandise, Reprints
(239) 280-2380
Cover photography by
TERRILL HOFFMAN
Dealer Sales
(239) 280-2380
Letters to the Editor, New Products or
to Contribute a Story or Photo
Bethany Miller
22840 Savi Ranch Parkway, #200, Yorba Linda, CA 92887
bmiller@beckett.com
Subscription Rates
$17.95/1 year, $27.95 2/years. Foreign $29.95/1, $51.95/2 years payable
in US funds. Single copy price is $5.99. Please allow 6 to 8 weeks for
new subscriptions to begin.
Beckett Media, LLC
Nick Singh: Executive Director
Erin Masercola: Business Unit Editorial Director
GST #855050365RT001
75
Canada Post: Publications Mail Agreement #40612608
Return undeliverable Canadian addresses to:
PITNEY BOWES, INC.
P.O. Box 25542
London, ON N6C 6B2
This magazine is purchased by the buyer with the understanding that
information presented is from various sources from which there can be no
warranty or responsibility by Beckett Media, LLC as to the legality,
completeness or technical accuracy.
6 KNIVES ILLUSTRATED • MARCH/APRIL 2014
KI_1404_7 2/6/14 11:31 PM Page 7
Now DW\RXUÀQJHUWLSV
Knives Illustrated
Knives Illustrated is now
available on Apple Newsstand,
Google Play and Kindle.
Knives Illustrated is your guide to the best knives -- hunting,
chef ’s, tactical, outdoor, collectibles, and more.
Download the FREE APP and get a 1-year subscription (6 issues) for only
$12.99 and save 64% off newsstands!
You can also purchase single issues for only $3.99.
For questions on downloading this app contact 800-764-6278
KI-1404-8-EDIT 2/10/14 3:57 AM Page 8
“ALL OUR FAVORITE KNIFE
COMPANIES ARE CONTINUING TO UP
THEIR GAME IN 2014, AND AS LONG
AS THEY DO, WE’LL CONTINUE TO UP
OUR OWN GAME IN RETURN.”
EDITOR’S
LETTER
Big Things Ahead
SPYDERCO DOMINO
Courtesy of Spyderco
f I had to describe the 2014 SHOT show in one word, that word would
be BIG.
I
The venue, the Sands Expo and Convention Center, boasts some big numbers: The event spanned 635,000 square
feet, packed wall to wall with more than
1,600 exhibits and some 67,000 attendees. It was such a labyrinth that at one
point I found myself navigating the good
ol’ fashioned way with a map and compass.
But the show itself isn’t the only thing
I’d call BIG. Plenty of companies had big
news, like Victorinox’s merger with
Wenger; big anniversaries, like Case’s
125th year in business; or big products —
literally! (You should have seen the machete on our cover in person.) All of
these things have resulted in one big special section; nearly half of this issue is
devoted to giving our readers a glimpse
of the best, most exciting products we
saw in Las Vegas.
Perhaps most importantly, though, I
left SHOT sensing that there are BIG
things in store for this magazine. There’s
8 KNIVES ILLUSTRATED • MARCH-APRIL 2014
nothing quite like spending a few days
completely immersed in handling and
learning about the hottest, highest-quality, most innovative new products to
kick-start your inspiration. All our favorite knife companies are continuing to
up their game in 2014, and as long as
they do, we’ll continue to up our own
game in return.
We’re excited about what lies ahead
for the rest of the year and beyond —
and we hope that after reading this issue, you will be too! KI
— Bethany Miller
#$$%&'())*+,-.)./'-0()'1.,2/'-0(('1'3)( !""
KI_1404_9 2/6/14 11:04 PM Page 9
KI-1404-10-12-NEWS CX2 2/10/14 3:52 AM Page 10
UPCOMING EVENTS
POINTSof
Dates and locations subject to change; please contact
the show managers before arranging your travel.
INTEREST
Name the Maker
CORRECTLY IDENTIFY THE MAKER OF THIS
KNIFE TO WIN A FREE SUBSCRIPTION
PHOTO BY ERIC EGGLY
HINT:The maker of
this sword has
specialized in samurai
sword craftsmanship
since 1983. He studied
3-D design, sculpture
and art in college, then
turned to
bladesmithing after
he began learning
martial arts. While his
swords are designs
from the Far East, his
business is based on
the East Coast.
ONGOING THROUGH JUNE 22
LITTLE ROCK, AR
A Sure Defense: The Bowie Knife in America
(501) 324-9351
www.historicarkansas.org/whatsnew
MARCH 28-30
JANESVILLE, WI
Annual Badger Knife Show
(414) 479-9765
badgerknifeclub@aol.com
www.badgerknifeclub.org
APRIL 4-6
HARRISONBURG, VA
Greater Shenandoah Valley Knife Show
(540) 828-0778
clubmail@svkc.org
www.svkc.org
APRIL 12-13
EUGENE, OR
Oregon Knife Show
okca@oregonknifeclub.org
www.oregonknifeclub.org
MAY 3-4
MYSTIC, CT
Northeast Cutlery Collectors Association Annual Show
(401) 742-6779
lcliff1@verizon.net
www.ncca.info
JUNE 6-8
ATLANTA, GA
Blade Show
(877) 746-9757
bladeshow@fwmedia.com
www.bladeshow.com
JULY 31- AUG. 3
LOUISVILLE, KY
Knifemakers’ Guild Show
(502) 585-3200
www.knifemakersguild.com
HOW TO WIN
If you correctly identify the maker of the featured knife, you will be entered
into a drawing for a free one-year subscription to Knives Illustrated. If you’re
already a subscriber, you may choose to extend your current subscription or to
receive a subscription to one of our sister magazines, Gun World or Bow &
Arrow Hunting.
All entries must be received by 4 p.m. PST on April 15.
Winners are determined by placing entries in numerical order and
generating a random number using www.random.org.
Please submit guesses to bmiller@beckett.com and specify your preferred
prize option. Please also include the mailing address where you would like to
receive your subscription should you win.
1 0 KNIVES ILLUSTRATED • MARCH-APRIL 2014
We congratulate
Knives Illustrated
reader Alice
Ieronimo, who
correctly
identified Bill
Tuch as the
maker of the
knife featured in
our December
issue.
AUG. 15-17
DENVER, CO
Denver Custom Knife Show
(785) 820-6928
jimmagee@cox.net
www.proknifemakers.com
SEPT. 13-14
WINSTON-SALEM, NC
Southeastern Custom Knife Show
www.southeasterncustomknifeshow.com
KI_1404_11 2/6/14 11:16 PM Page 11
TWO is better than One
Subscribe Now and SAVE BIG
only
$32.95
/RJRQWRwww.engagedmediamags.com/combo_kiasg
&DOORXUWROOIUHHQR
)LOORXWWKHRUGHUIRUPEHORZDQGPDLOLWZLWK\RXUSD\PHQWLQIRUPDWLRQWR
%HFNHWW0HGLD//&32%R[1R3KLODGHOSKLD3$
to subscribe
Take advantage of this special offer and get a 1-year subscription to Knives Illustrated with a
1-year subscription to American Survival Guide and SAVE UP TO 69% off the cover price!
❑ YES! sign me up for a subscription to Knives Illustrated and
American Survival Guide
That is a total of 15 issues for a total savings of $74.90 off the cover price
Method of Payment
Check enclosed
Payment through credit card
Visa
Credit Card
MC
AMEX
Money Order
Discover Name on credit card
Expiration date
Credit card number
Subscriber name
First
MI
/
/
Last
Address
City
State
Phone
Enter Promo Code
Email
Signature
Date
/
/
AN33L021
For a full listing of our titles, visit www.engagedmediamags.com today!
Allow 6 to 8 weeks for delivery of first issue. Outside US, add $28 per year for additional postage. Pay in US funds only.
KI-1404-10-12-NEWS CX2 2/10/14 3:52 AM Page 12
FAQ
Photo by Terrill Hoffman
Since our annual buyer’s guide hit
newsstands and mailboxes in November, we’ve received numerous
emails asking about the maker of
this knife, which appeared on page
8, the intro to our tactical section.
This blade was crafted by Martin
Knives, located in Caddo Mills, Texas.
• Website: www.martinknives.com
• Email: info@martinknives.com
• Phone: (903) 527-5893
RecordBreakers
WORLD’S MOST
MULTIFUNCTIONAL PEN KNIFE:
With 87 tools capable of performing 141 functions,
Wenger Swiss Army’s Giant is hardly a practical everyday carry. But this Guinness record holder is surely a tantalizing novelty for multitool enthusiasts and collectors alike. The
Giant measures only 3.25 inches in length, but a whopping 8.75
inches in width and 2 pounds, 11 ounces in weight. It comes with a
custom-engraved plaque, lifetime warranty and hefty $2,150
price tag.
WORLD’S SMALLEST KNIFE:
Created by the University of Colorado’s National Institute of
Standard and Technology, the world’s first micro-knife or
nanoknife is so tiny it’s invisible to the naked eye. The nanoknife
was designed for scientific and medical use to obtain microscopic cell samples and is recognized by Guinness World Records.
WORLD’S LARGEST BOWIE KNIFE:
The city of Bowie, Texas, is hoping to set the world record for
largest Bowie knife. A fundraising campaign was launched by the
Bowie Chamber of Commerce in December 2013. If all goes well,
the knife will be more than 20 feet long and will be displayed as
a memorial in Bowie’s Pelham Park.
WORLD’S LARGEST BUTTER KNIFE:
Swedish woodworking instructor Claes Blixt is vying for the
Guinness World Record for largest butter knife, which he finished
crafting in August 2013. The knife measures 8 feet, 1 inch long
and weighs 62.8 pounds. The World Record Academy has recognized the knife, but Guinness’ recognition is still pending. KI
CC_1404_13 2/6/14 10:59 PM Page 13
KI-1404-14-17-QA 2/7/14 12:23 AM Page 14
BEHINDthe
SCENES
American
Revolution
HOW FOX KNIVES IS
BRINGING NEW LIFE TO THE
U.S. KNIFE MARKET
STORY BY BETHANY MILLER
PHOTOS COURTESY OF FOX KNIVES USA
his month, we spoke with Mike
Vellekamp, a longtime designer
and fixture in the knife industry
who’s now owner of Fox Knives USA.
T
Can you give us a brief rundown of your
company history?
We started off by distributing products from our Italybased parent company, Fox Cutlery, and now we are focused on manufacturing Fox USA products here in Puyallup,
Washington, for global distribution.
Is there a particular philosophy that drives the way Fox
Knives USA runs its business?
Yes: “Customer first.” We pride ourselves on our ability to
adapt to the ever-changing economy and industry to provide the best support possible for our various customers,
from original equipment manufacturers, to distributors, to
dealers or retail. We strive to offer the best materials, best
workmanship and best customer service.
What is your research and development process like, how
do you conceptualize new products, who is responsible
for that process, etc.?
Through my many years experience in the knife industry —
and especially when I worked for Spyderco — I’ve learned to
turn to the most educated members of the
knifemaking/knife industry community for many answers.
However, we do a great deal of research here on our own.
ABOUT THE
INTERVIEWEE
NAME: Mike Vellekamp
TITLE: Co-founder/owner
HOW LONG HAVE YOU
WORKED THERE? Since 2009
KI-1404-14-17-QA 2/7/14 12:23 AM Page 15
Olympian
series
“WE WANT TO
CONTRIBUTE TO THE
RETURN OF AMERICAN
MANUFACTURING AND
EXPORTING OF FINE
GOODS.”
—MIKE VELLEKAMP
KNIVES ILLUSTRATED • MARCH-APRIL 2014 1 5
KI-1404-14-17-QA 2/7/14 12:23 AM Page 16
ABOUT THE COMPANY
HOW LONG HAVE YOU BEEN IN BUSINESS?
Since 2009
HOW MANY EMPLOYEES DO YOU HAVE?
It fluctuates between five and 10 based on
production
WEBSITE: www.foxknivesusa.com
For instance, I recently met with some
folks at a unique research and development lab here at the University of Washington to discuss some ideas for a new
design. We do a lot of testing and breaking things before we bring a new product
to market.
As far as conceptualizing new products
goes, sometimes it’s a new design that
“FEW COMPANIES STILL PRODUCE ALL THEIR KNIVES IN THE
U.S., AND I’M GLAD WE’RE ABLE TO DO SO RIGHT HERE IN
PUYALLUP [WA].”
—MIKE VELLEKAMP
comes from collaboration with a custom
knifemaker. Other times, concepts come
directly out of the design talent here in
Fox Knives USA or Fox Knives Italy.
Gabriele Frati (son of Fox Italy founder
Oreste Frati) and I are responsible for
planning the addition of new designs into
the product line.
What product or line are you most proud
of, to date, and why?
Well, it has to be the Amico and the
Olympian series, which are our newest
Fox USA lines. Few companies still produce all their knives in the U.S., and I’m
glad we’re able to do so right here in
Puyallup.
What upcoming product or line are you
most excited about?
We collaborated with custom knifemaker Jens Anso on our Zero series. These
Anso
RH3
series
KI-1404-14-17-QA 2/7/14 12:23 AM Page 17
knives feature several new blade designs
by Roland Hinojosa III with the existing
Anso Knives handle designs.
earth, and every customer comes first.
We’re thankful for every order, large or
small!
Personally and from a company’s perspective, what have been your greatest
challenges in this industry? What challenges do you foresee ahead?
I suppose the biggest challenge is educating the knife community about the importance of buying from an American
company to stimulate the economy —
rather than “saving” money by buying an
outsourced product.
What are Fox’s goals as a company for
the near and distant future?
We want to focus on more USA designs
and USA-made products for sale not only
stateside, but also across the globe. We
want to contribute to the return of American manufacturing and exporting of fine
goods. KI
What keeps your customers coming
back?
I think it’s the fact that we’re down to
Amico series
Amico in black
KI-1404-18-24-BEHRING 2/7/14 12:41 AM Page 18
CARVING
THEIR PLACE
HOW YOUNG COMPANY BEHRING
MADE FOUND FAST SUCCESS IN
THE KNIFE WORLD
STORY AND PHOTOS BY CHRIS LA TRAY
ontana knifemaker James Behring looks a bit
sheepish as he tells the story. “One guy cut his
finger. He pulled a knife out of the sheath like
he was just gonna… ” Behring makes a flourish like a
knight drawing a sword, “and he had to get seven
stitches. Blood just dusted the whole display.” Behring
smiles. “The thing is he was gonna buy three knives
and after he cut his finger he bought six.”
M
This is a tale from the vendor floor of the Mathews Dealer show
in Wisconsin Dells, Wisconsin, this past December. Mathews Inc. is
one of the largest and most successful bow and archery accessories manufacturers in the world. Behring and his threeman crew of knifemakers were there at the culmination
of a lengthy process that saw them successfully earn a
contract to sell Behring knives co-branded with the
Mathews logo to an army of Mathews dealers.
These knives span three lines with four models, including handle variations, different blade finishes, the
works. The crew piled into a Ford Explorer with 40 knives
and drove 27 straight hours over icy roads and temperatures of 30 degrees below zero to get there — and they were
thrilled to do it.
Getting a Kickstart
Mathews representatives told Behring that getting a new product off the ground typically takes three years, but Behring has
come out of the gate strong and hopes to cut that process time in
half.
“PEOPLE ASKED US, ‘CAN YOU
MAKE THIS OR THAT’ AND WE
WERE LIKE, ‘BUDDY, WE CAN
MAKE WHATEVER YOU
WANT!’ ”
—JAMES BEHRING
James Behring hopes to continue upgrading the
machinery in Behring Made’s workshop, which
operates out of Missoula, Montana.
“These Mathews knives are a lightweight cutting tool,” Behring says.
“They aren’t hack and chop and prying, hard-use knives. Black on black,
clear coat, we’re doing a marine epoxy layer; it’s like a waterproof all-purpose knife. Handmade, American Made, even at full retail of $160 on that
knife you’re still paying about the same as what you’d pay for a dozen arrows. People loved them.”
The Behring team was also approached by dealers who, in
addition to selling Mathews products, sell their own brands.
Many were intrigued by what Behring was doing. “People asked
us, ‘Can you make this or that’ and we were like, ‘Buddy, we can
make whatever you want!’ ” Behring says. “I don’t think people are
used to hearing that these days. They’re more used to hearing, ‘No, no,
we can’t do that.’ ”
Gaining a partnership with a behemoth like Mathews is an impressive
accomplishment, particularly for a company only in its third year of existence. James Behring grew up in Michigan, went to college to be a teacher,
and then after graduating decided the last place he wanted to be was in a
classroom again. He preferred being out in the wilds hunting and fishing, a
lifestyle he’d enjoyed his entire life. The knife trade appealed to him; he
learned the skill from his father, married
a girl from Montana, and relocated to
Missoula. After a few months acclimating — and fly fishing — he moved into his
current shop and started Behring Made
in September of 2011.
“WE CAN DO YOUR
LOGO, WE CAN DO
BLADE COLOR, WE
CAN MATCH
FINISHES — REALLY,
THE SKY’S THE
LIMIT.”
—JAMES BEHRING
Behind the Scenes
Behring’s crew — Travis Williams,
Dustin Millard and Grant Cunningham —
have been with him almost from the start.
None of them had any previous knifemak-
BEHRING TECHNICAL F-1
LENGTH: 12 inches
BLADE: 7 inches, O1 tool steel
HANDLE: Micarta grips with custom-made,
black oxide-coated screws
SPECIAL FEATURES: Extra-long finger
guard, included all-weather sheath, 100
percent USA-made, lifetime guarantee
CONTACT
BEHRING MADE
P.O. Box 17317
Missoula, MT 59808
(406) 926-1193
behringmadeknives@gmail.com
www.behringmade.com
James Behring founded Behring Made in 2011. Within that short time, he and his three-person team
have crafted hundreds of custom knives.
ing skills; Behring taught each of them
what they needed to know and they got to
work. In 2012 they made more than 900
knives, all custom, and sold every one. But
that was just the beginning of where
Behring wanted to take his business.
“2013 was about a big marketing push,”
Behring says. Not in a traditional sense either, where money is thrown around via
advertisements and mass mailings. “It
was about trying to get deals going with
other large, corporate hunting and outfitting organizations and do cross-branding
projects. Use their marketing and my
quality of work and create really a competitive profit margin for their dealers so
that everybody is benefiting from this
venture.”
Cooper Firearms of Montana is another
example of a Behring partnership. The
high-end rifle maker is located just south
of Missoula in Stevensville. A friend of a
friend tipped Behring off that the boutique rifle maker was looking for a knifemaking partner, so Behring drove down to
introduce himself.
“Cooper had this project they wanted
to do; they make these real high-end guns
and they wanted a knife to go with them,”
Behring says. “We came in, we made
something like six or seven prototypes.
But they’re not knife guys, they’re gun
guys, so they don’t really know what they
want. So you keep making them stuff and
they’re like, ‘Well, can you change this?’ ”
Behring Made managed to secure the
deal. They matched knives to three different rifles, mirroring the wood, checkering
and engraving. These knives began traveling to shop shows in January. Next up?
Discussions about a technical knife to go
along with Cooper’s mountain rifles.
“These knives are gonna be seen at the
SHOT Show and they’re going to be in between five and seven print ads,” Behring
said. “We’ll get some good exposure that
way.”
Gaining Momentum
Additional exposure came courtesy of
Sporting Classics magazine as well.
Behring produced a a two-knife kitchen
cutlery set — a 3.75-inch paring knife and
a 7-inch chef’s knife — that appeared in
the magazine’s Christmas catalog. The
magazine was so pleased that discus-
sions are underway for Behring Made to
produce up to 175 knives as part of the annual Sporting Classics “Knife of the Year”
spread.
Working with these larger companies
presents unique challenges. Things tend
to move much, much slower. “One thing
about the business I didn’t anticipate is
the time — the lead time,” Behring says.
“The time from concept to production is
six months on some of this stuff, to a year.
I drew this stuff up last winter.”
In addition, there are large companies
Behring is engaged with — with thousands of dollars already invested in design and prototypes — that are months
past the date they promised an answer.
“Patience is the name of the game with
corporations,” Behring says. “But if that
deal goes through, and we get an order for
500 knives, that ensures the job of one
guy upstairs and maybe makes room for
another.”
In the meantime, Behring Made has
gotten smarter and more efficient with
the process of making knives. They have
invested heavily in reorganizing and upgrading the shop, adding a new compressor, a new mill machine, quench tank, and
new dust collector — all geared toward
the day that first big production order
comes in.
“I’m really excited to make a big run of
all the same knife. We’ve never done more
than (about) 30,” Behring says.
The Behring team also has honed their
capabilities. If a company engages them
in a project, Behring knows exactly what
they’re capable of. “It’s about three to six
months from concept to prototype,”
Behring says. “We can do a couple prototype revisions, and then we can make a
STEALTH SKINNER
Designed for Mathews Pro LT line
LENGTH: 8 inches
BLADE: 3.75 inches, O1 tool steel
HANDLE: Marine epoxy,
paracord-wrapped
SPECIAL FEATURES: Available in
choice of polished or Cerakote blade
finish, custom-made sheath
ARTIFACT WALRUS
IVORY FIGHTER
LENGTH: 7 inches
BLADE: O1 tool steel with tall copper guard
HANDLE: Artifact walrus ivory with ivory
and copper spacers
“PATIENCE IS
THE NAME OF
THE GAME.”
—JAMES BEHRING
SOUTHWEST BOWIE
LENGTH: 14 inches
BLADE: 8 inches, 5160 spring steel
HANDLE: Brass and premium horsehide
leather spacers, crown stag butt
SPECIAL FEATURES: Brass S-guard,
includes sheath
INSIDER INFO
Grant Cunningham, one of the
members of the small knifemaking
team, explains how Behring Made
chooses blade and handle materials.
“We tend to stick with high-carbon
tool steels because we've found it to
be the best median between edge
retention and ease of working in a new
one. Lately, we've been adding more
stainless steel into our forge for
variety, and we've been consistently
satisfied with the final product so it's
definitely something you'll be seeing
more of from Behring Made.”
“We use copper, brass and nickel silver
for our guard materials, and I'd say we
most commonly use stag for handle
materials. We're really into the
concept of ‘your grand-dad's knife,’
and the nostalgia of a stag handle as
well as the durability and one-of-akind texture that each piece provides
makes it the ideal choice.”
“However, we do plenty of ivory knives
like the Artifact Walrus Fighter, as well
as Micarta, and even exotic woods with
truly remarkable burls. Many
customers will send us in their own
materials — anything from family
heirlooms to .50 caliber casings fired in
combat. We can pretty much put a
blade in anything.”
couple hundred a month, from that point
on, with a couple months of lead time. So
by the end of that first year they’re gonna
have about 400 or 500 knives. We can do
your logo, we can do blade color, we can
match finishes — really, the sky’s the limit.”
A Team Effort
Even though he’s responsible for making
the deals, Behring remains 100 percent
hands-on when it comes to production. He
does all the grinding, all the blades, all the
handles, layout and design. The rest of the
labor is divided up among the other three
workers. Even the graphic design for all of
their printed materials is handled in-house.
“We all work together on design concepts,
construction, what’s the best product to use
for this versus that, all that,” Behring says.
He’s enthusiastic when speaking about the
guys in his shop, and the work they’re doing.
“I’m trying to create careers, not jobs. I would
be so happy if this work could support 10
families in this community.”
Meanwhile, the custom knife business
remains Behring Made’s bread and butter.
There’s a solid flow of orders every month
that come through via the Internet, knives
that customers can configure just the way
they want them. In 2014, they plan to upgrade the website even more; creating a
portal for their own line of technical knives,
for example, as well as access to vendors
to place orders directly online.
Like most success stories, Behring hangs
the rapid growth and accomplishments of
his young company on one thing: hard
work. “We’re hustling. We don’t have business degrees,” he says. “I have the most
college education of any of us, and I was an
English major, for God sakes! I read literature for four years, I didn’t learn anything
about financing or marketing or any of that
stuff.” But those handicaps have hardly
slowed Behring Made down. “(We’ll) make
a game plan, execute, and see where we
end up,” Behring says.
So far, so good. KI
KI_1404_25 2/7/14 12:54 PM Page 25
TWO is better than One
Subscribe Now and SAVE BIG
only
$34.95
/RJRQWRwww.engagedmediamags.com/combo_fpgw
&DOORXUWROOIUHHQR
)LOORXWWKHRUGHUIRUPEHORZDQGPDLOLWZLWK\RXUSD\PHQWLQIRUPDWLRQWR
%HFNHWW0HGLD//&/RFNER[3KLODGHOSKLD3$
to subscribe
Take advantage of this special offer and get a 1-year subscription to Fire Power with a 1-year
subscription to Gun World and SAVE UP TO 69% off the cover price!
❑ YES! sign me up for a subscription to Fire Power and
Gun World
That is a total of 18 issues for a total savings of $78.87 off the cover price
Method of Payment
Check enclosed
Payment through credit card
Visa
Credit Card
MC
AMEX
Money Order
Discover
Name on credit card
Expiration date
Credit card number
Subscriber name
First
MI
/
/
Last
Address
City
State
Phone
Enter Promo Code
Email
Signature
Date
/
/
AN34F011
For a full listing of our titles, visit www.engagedmediamags.com today!
Allow 6 to 8 weeks for delivery of first issue. Outside US, add $48 per year for additional postage. Pay in US funds only.
KI-1404-26-32-KABAR CX 2/10/14 4:05 AM Page 26
“IT’S IMMEDIATELY
OBVIOUS THAT [THE
CREWMAN] WAS
FORGED FROM THE
FIELD-TESTED
KNOWLEDGE OF WHAT
MAKES A GREAT
UTILITY KNIFE.”
KA-BAR’S CREWMAN OFFERS
FIRST-RATE DURABILITY
FOR MILITARY AND EVERYDAY
USERS ALIKE
STORY AND PHOTOS BY
CLINT THOMPSON
t only makes sense for a worldclass knife designer and worldclass manufacturer to collaborate on
a world-class knife.
I
The KA-BAR Crewman was designed in partnership with
Ethan Becker to be carried by military flight crews.
The polyester sheath is the only component of the Crewman not
made in America. It’s durable and MOLLE-compatible. The double
straps ensure the knife remains secured in place no matter what.
This is exactly what happened when
KA-BAR, with its century-long history of
excellence, teamed up with leading designer Ethan Becker to produce the KABAR BK-10 Crewman. I’m a longtime fan
of both KA-BAR and Becker, so I jumped
at the chance to review this knife.
First Impressions
This knife is, without question, a greatlooking knife. It’s immediately obvious that
it was forged from the field-tested knowledge of what makes a great utility knife.
The blade is 1.63 inches
I immediately fell in love
SPECIFICATIONS
wide,
which makes sense; the
with the clip point on the
LENGTH: 10.9 inches
Crewman was not designed for
blade. The clip point’s design
BLADE: 5.5 inches,
tactical combat use, for which
makes it ultra-strong and ca1095 Cro-Van
a narrower blade would be
pable of handling the most
HANDLE: Zytel
preferable. This wider blade
punishing use. I typically recWEIGHT: 12 ounces
suited my concept of a good
ommend that a utility/combat
INCLUDED: Heavyutility knife and is sturdy
knife should measure between
duty, MOLLEenough to dig a small hole in
4 and 6 inches, with the sweet
compatible polyester
frozen ground, which I did easispot being long enough to be
sheath
ly in less than two minutes.
effective, but short enough for
While the Crewman itself is 100 pereasy carry and deployment. At 5.5 inches,
cent USA-made, the sheath was made in
the Crewman’s blade is perfect.
The Crewman held its own under even
the most punishing tests. After extensive
abuse to put the knife through its paces,
the blade was only slightly scuffed.
“I HAD NO PROBLEM CHOPPING
THROUGH 2- TO 3-INCH LIMBS
IN A WHACK OR TWO.”
China. While I wish it had been made stateside to round out a
completely American-made product, the sheath is well designed
to be MOLLE compatible and works effectively.
Hands-On
Right out of the box, the Crewman’s handle appears to be a
little large, but it fit my average-sized hand perfectly. During ex-
tended, serious chopping, the handle did not allow any irritating
vibration, which even other quality knives often do. I had no
problem chopping through 2- to 3-inch limbs in a whack or two.
This makes the Crewman an optimal tool for building a shelter
quickly, if necessary.
I took this bad boy out to the woods, where I found plenty of
things to give the blade a workout. Even after repeated stabbing,
prying and twisting in hard wood, the tip was undamaged. To
test whether the Crewman would snap, I wedged the blade between two planks and hung my full 220 pounds from the handle. The knife held well, sparing me from injuries I’ve sustained
while performing the same test on other knives. The only sign of
abuse afterward was some slight wear to the black finish along
the point and first inch of the blade.
CONTACT INFO
The pommel of the Crewman is
KA-BAR
nearly an inch long, which came in
200 Homer St.
handy for pounding and smashing variOlean, NY 14760
ous objects. I drove a bolt into a metal
(716) 372-5952
gate with a good whack, and the pomwww.kabar.com
mel was no worse for wear, proving
Find us on
Discover the premier
knife magazine.
www.facebook.com/knivesillustrated
“EVEN THOUGH THE CREWMAN WAS DESIGNED
WITH MILITARY PROFESSIONALS IN MIND,
I CAN SEE SOME SERIOUS VALUE FOR
THE CIVILIAN POPULATION.”
that both ends of the knife are up to the
toughest of tasks.
Universally Useful
Even though the Crewman was designed with military professionals in mind,
I can see some serious value for the civilian population. In particular, this knife
could be a valuable asset to outdoorsmen
CREWMAN HIGHLIGHTS
• 100-percent American-made
(excluding sheath)
• Perfect blade length for maximum
versatility
• Extremely durable
• Useful for both military and civilians
such as backpackers and hunters. At only
12 ounces, it won’t weigh down a rucksack
and will fit easily into a standard camping
gear kit.
I also highly recommend the Crewman
for those who wish to practice their survival techniques. It’s fit for any number of
demanding uses and will be a fine addition to a bug-out bag.
The result of a collaboration between
such a first-rate designer and well-established company, it should come as no surprise that the KA-BAR Becker Crewman is
a strong, versatile tool that will serve its
owner for many years to come. KI
The Crewman’s beefy handle
is just as tough as the blade.
The pommel can safely and
effectively be used for
pounding and crushing.
The shape, strength and width of the Crewman’s blade
make it an optimal tool for digging holes in a hurry.
“THE KA-BAR
BECKER
CREWMAN IS A
STRONG,
VERSATILE
TOOL THAT
WILL SERVE ITS
OWNER FOR
MANY YEARS TO
COME.”
KI_1404_33 2/10/14 11:38 AM Page 33
www.knifeandgun.com
K & G FINISHING SUPPLIES
Your #1 Stabilizer for over 23 years
We can stabilize your wood, horn, bone,
Ivory and gemstone.
Custom Dying and Stabilizing
Call for more information
800-972-1192
KI-1404-34-41-BUCK CX 2/10/14 4:10 AM Page 34
BUCK’S EXPERT-DESIGNED
HOOD THUG WITHSTANDS
THE TOUGHEST TASKS
BY JIM WEISS AND MICKEY DAVIS
EXTREME conditions demand an extreme knife.
To meet that need, Buck Knives teamed up with knife designer
Ron Hood to produce the Buck/Hood Thug. The multifunctional
Thug is both light enough to be easily carried and also heavy duty
enough to withstand the most rigorous wilderness use and abuse.
The Basics
What makes this USA-made knife so tough? For one, the steel
is triple heat-treated to draw out its hardness—in addition to the
standard oil quenching. It’s finished with a sprayed-on powder
coating, then baked and cured at a low temperature. The result is
a blade that’s not only high-carbon, but high-performance.
KI-1404-34-41-BUCK CX 2/10/14 4:10 AM Page 35
“THE RESULT
IS A BLADE THAT
IS NOT ONLY
HIGH-CARBON,
BUT HIGHPERFORMANCE.”
KI-1404-34-41-BUCK CX 2/10/14 4:10 AM Page 36
A particularly attractive feature of
the knife is Buck’s Shock Mitigation
System (SMS) in the form of a hollow shank. This system reduces
wasted energy when chopping, sparing the user of much fatigue during
use.
The large finger choil provides control for whittling or other detailed activities, and the Micarta handles can
be removed if desired.
Custom Knifemaker's Review
When thinking about the name
Buck Thug, custom knifemaker Paul
Granger said he pictures a deer with
a full rack hanging out in a pool hall,
tattooed, smoking and drinking while
obnoxiously flirting with the cocktail
waitress. Since Ron Hood and the
folks at Buck Knives named Hood’s
three knives Punk, Thug and Hoodlum, the reader can see that Ron and
the Buck team were having a bit of
fun with Ron’s last name.
HANDLE: The handle is cocked
downward, which is a fine trait and
something that knife manufacturers
don’t often think about. The cocked
handle is more pronounced than on
“THE HANDLE
IS COCKED
DOWNWARD,
WHICH IS A
FINE TRAIT …
THAT KNIFE
MANUFACTURERS
DON’T OFTEN
THINK ABOUT.”
Paul Granger specializes
in making fixed-blade
knives of his own unique
design as well as in
traditional patterns. He
has created a line of
lightweight, non-metallic,
non-ceramic knives
currently in use by the
American and Canadian
militaries, multiple police
departments, and the FBI
and CIA. His website is
www.palehorsefighters.
blogspot.com.
The Thug’s included MOLLEcompatible sheath allows the
user a choice of how to carry it:
with or without the secondary
retention cord.
KI-1404-34-41-BUCK CX 2/10/14 4:10 AM Page 37
most knives, so when the user stands and
holds the knife out to the side or in front,
the blade is more naturally in a horizontal
position. This design takes into consideration the real ergonomics of the arm and
hand because otherwise when held in this
position, the blade would be pointed upward.
Granger also thinks highly of the linen
Micarta handle material, which won’t
dent, crack or become misshapen. There
isn’t a swell to the handle, but it has a bit
of a belly. A sub-hilt feature creates a finger groove to let the knife’s user know
where his or her hand is on the handle
without really looking. There’s also jimping on the spine of the knife just forward
of the handle.
The Shock Mitigation System (SMS)
consists of a tang with its middle section
removed. Granger likes that extending the
tang beyond the handle allows for a cord
thong hole.
The jimping on the tang of the handle is
smooth, rounded and below the level of
the handle; therefore it’s ineffective.
BLADE: The blade of Granger’s sample
was sharp out of the box. It’s a good,
thick, drop-point blade, made with a hollow grind (although according to Buck,
they will be changing to a flat grind in
2014).
The blade is sharp right up to the finger
cutout forward of the guard; however,
Granger felt the cutout is too small, which
surprised him. When choking up on the
blade or using the finger groove forward
of the guard, the knife user could get
nicked.
In front of the guard at the top of the
blade — the spine — there’s jimping that’s
also rounded off, meaning that the knife’s
user gets less traction. Granger said it’s almost as if the blade was put through a
stone-washing tumbler that rounded off
the jimping. This type of jimping can be
somewhat useless if the knife user is
wearing gloves, but it works well when the
knife is used with bare hands.
SHEATH: The included MOLLE-compatible sheath has a rather neat feature:
There’s a secondary retention in the form
of a tightening and loosening fitted device
or cord thong, which makes the knife
jump-qualified for paratrooper usage. If
the user doesn’t care to use the secondary retention cord and wants to use only
the sheath retention strap, he or she can
just flip the cord thong to the sheath’s
back to keep it out of the way. It’s a nice
option. There are a lot of tie-down points
to facilitate airborne tie-down methods.
The sheath also comes with large pocket and is ambidextrous. The liner can’t be
removed.
OVERALL: Granger approves of the
Thug in general, though not quite enough
The jimping on the tang of the handle is smooth, rounded and below the level of the handle.
HOLLOW, CONVEX AND FLAT GRINDS
Hollow and the flat grinds each have their good points and their less-than-good points.
Hollow-ground blades are easier and quicker to sharpen, and can take a very keen edge.
Straight razors are hollow ground. However the blade is much thinner for a greater distance from
the edge; therefore hollow ground blades are excellent for cutting flesh and feather sticks, but
they’re not the best choice for chopping.
Convex-ground blades are thick right up to the edge--similar to an axe--so they are excellent
for chopping. They are arguably less suited to fine, detailed work as well as a bit trickier to
sharpen.
Flat-ground blades are right in between hollow ground and convex ground, drawing from the
good points of each, while leaving some of the shortcomings of each behind. Flat ground knives
are easier to sharpen than convex ground, and will stand up to a reasonable amount of chopping.
This is because they’re not as thin far from the edge as a hollow grind. Flat ground knives will
handle fine work much better than a convex ground blade, and nearly as good as a hollow grind.
One can put a razor-sharp edge on a flat-ground blade with the right equipment and/or skill,
and when you do, it will last longer than on a hollow-ground blade.
KI-1404-34-41-BUCK CX 2/10/14 4:10 AM Page 38
to give it an A grade. Its balance is good
close to the guard, if a bit blade heavy,
which is useful when chopping.
Law Enforcement Specialist’s
Field Evaluation
The Buck Thug was delivered to the
castle on a warm summer’s day. I was giddy with anticipation regarding its arrival
because of my positive experience with
the first of the late Ron Hood’s creations,
the Hoodlum, which I evaluated two years
prior. The Hoodlum’s field evaluation was
such a success; I couldn’t wait to grab
hold of the new and slightly down-scaled
Thug.
For many years, I have had the honorable and crucial job of training our folks
who go into harm’s way. Along with the
obvious, my teaching duties include instructing basic wilderness survival skills
to natural resources law enforcement and
special operations personnel. Part of this
training includes educating these folks on
horizontally thanks to the MOLLE straps.
the selection and use of the one tool you
The knife, which weighs a mere 11.6
must take with you or make in the field,
ounces, is secured in the reversible polywhich is the knife.
mer insert via a hook-and-loop strap that
To say that I’m quite critical in this area
surrounds the handle, and/or a loop of
is an understatement. The reason for this
550 paracord. It has a niceis simple: we’re discussing a
Mark
Allen
Prince
is
a
sized pouch on the front to
matter of life or death. I’ve
professor of law
accommodate other survival
seen “survival knives” break
enforcement
kits, and a length of 550
in the woods, and “tactical
technology/special
paracord at the bottom.
folders” fail, causing serious
operations at Central Ohio
Technical College; a former
I first subjected the knife
physical harm. Thankfully,
USDOE SRT operator; and
to a series of what some
such events occurred in a
spent 20 years in local law
folks consider “torturous”
training environment where
enforcement special
steel hammer blows to all
the life of the operator was
operations and training.
unsharpened sides of the
not at risk. It’s my job to
He has developed and
blade and pommel. I delivmake sure this does not hap- teaches courses in
homeland security and
ered a total of 100 reps to
pen to any of our operators
special operations for
each side. A small amount of
by conducting realistic field
military, state and local
the coating was removed
evaluations on such tools.
special operations
during this test.
I worked with and carried
personnel and
organizations. He is an
Next, I chopped and
the Thug for more than a
instructor/trainer-certified
stabbed a poplar stump hunmonth. The black nylon
by the late Colonel Rex
dreds of times. As the Thug
sheath was accommodating;
Applegate.
was delivered razor sharp, it
it can be carried vertically or
The handle features removable linen Micarta scales.
KI-1404-34-41-BUCK CX 2/10/14 4:11 AM Page 39
The Buck Thug’s carbon steel, powder-coated blade is triple-treated for maximum hardness. It’s sharp right out of the box.
COAST’S PATENTED DOUBLE-LOCK DX355.
FIXED BLADE SAFETY IN A G10 FOLDER.
CH
A
LOCK ON
M
The Double-Lock safety mechanism works
in conjunction with a primary Liner-Lock to
prevent disengagement. It includes a safety
detent-action that is fully tension adjustable.
LE
LYSTEEL
PO
IN E D H A N
D
TENSION
ADJUST
LOCK OFF
DOUBLE-LOCK
U.S. Patent 5,596,808
DX355
DOUBLE-LOCK
COAST Products • Portland, OR
COASTportland.com • dealer.help@COASTportland.com
KI-1404-34-41-BUCK CX 2/10/14 4:11 AM Page 40
was a hoot to see the
Satisfied that the knife
chunks of wood fly through
was indeed “bush tough,” I
SPECIFICATIONS
OVERALL LENGTH: 13 inches
the air as I conducted this
introduced it to more comBLADE: 7 inches, 5160 steel
evaluation.
mon evaluations such as
with powder coat finish
I then coated the Micarta
batoning and chopping
CARRY SYSTEM: Black,
grips with cooking oil, and
firewood, hammering
heavy-duty nylon, MOLLEstabbed the stump 100
bricks with the pommel,
compatible, adjustable for
times. My hand moved
and carving tiny items such
high or low carry
about a little bit, but did
as gorge hooks for fishing.
HANDLE: Removable black
not move forward onto the
The coating did come off a
linen Micarta handle scales
blade.
bit when batoning hard
WEIGHT: 11.6 ounces
Next, I took the knife to
maple, but the modified
Forever warranty
MSRP: $200
the stack of oak wood palKukri-style blade, coupled
lets and pried a board free.
with the shock mitigation
The blade, which is .185 inches thick, did
design of the handle, was a pleasure
when chopping 3- to 5-inch diameter
flex considerably, but in the end it did not
cherry logs. The jimping and choil helped
break, nor was the tip chipped at all.
out immensely when carving items.
Last but not least, I took the Thug into
Sharpening the carbon steel blade was a
the woods where I keep the rusty Jeep
breeze with the kitchen steel.
truck bed (circa 1977) for the penetration
The Buck/Hood Thug is marketed wisetest. The reason for this is simple: the
ly
as
a survival knife, and it has been accumetal in the body of today’s cars and
trucks is easily penetrated and carved up
with a decent knife. So gripping the Thug
The Thug can easily be
sharpened with DMT
in both hands, I raised it over my head and
sharpeners such as
conducted a few measured “touch drills”
those pictured here.
with the knife and steel. Satisfied that I
would not miss the truck bed and accidently hack off my leg, I forcefully thrust
the knife’s tip into the bed. It easily penetrated the thick and rusty steel by more
than an inch. After I inspected the tip, I
found no breakage or burring. An extremely impressive tip in my summation!
Reviewer Mark Allen Prince believes the Thug is well
suited for military and law enforcement use.
ABOUT THE DESIGNER
The late Ron Hood was well known for his
training techniques, spending more than 20
years teaching accredited college courses in
survival skills at UCLA, Cal State Northridge
and Antelope Valley College.
In addition, he was the author of numerous
articles for national magazines, produced
many award-winning survival training videos,
and was featured on many TV shows such as
Mythbusters and Ultimate Survival. He was
also involved with the training that goes on
behind the Man vs. Wild TV show on Discovery
Channel.
Hood acquired his knowledge and skills
from his days in the U.S. Army Security Agency
serving in the Middle East and Vietnam. He
also went on solo trips into the wildness, and
lived with various native populations around
the globe to practice and study skills with
them.
He was the publisher of Survival Quarterly
Magazine, which his wife has continued to
publish since his passing.
KI-1404-34-41-BUCK CX 2/10/14 4:15 AM Page 41
“THE MODIFIED KUKRISTYLE BLADE … WAS A
PLEASURE WHEN
CHOPPING 3- TO 5-INCH
DIAMETER CHERRY
LOGS.”
— MARK ALLEN PRINCE
rately designed in my opinion. Many survival folks will find it a much more manageable size, which may be more accommodating for their purposes. Although a
bit pricey at $200 MSRP, much like the
Hoodlum, this Thug would be something
you would enjoy having with you in the
middle of a dark woodlands night. KI
KI-1404-42-45-CUSTOM CX 2/10/14 4:18 AM Page 42
IN THE
THE BEST OF
CUSTOM BLADES
PHOTO BY JIM COOPER
KNIVES BY SUCHAT JANGTANONG
OPE R
ON
Y J IM CO
PHOTO B Y DAN I E L WATS
B
E
F
I
KN
PHOTO BY CHUCK WARD
KNIFE BY J. NEILSON
PHOTO B
SWOR D Y E RIC EGG LY
BY J U LI E
WAR E NS
K
I
PHOTO
KN I FE BY C H UC K WA
R
BY T.C.
RO B E R D
TS
PHOTO BY JIM COOPER
KNI FE BY AARON FRE DER ICK
PHOTO BY ERIC EGGLY
KNIFE BY S.R. JOHNSON
PE R
J IM COO ALETZ KY
Y
B
O
T
O
D
PH
Y MAR K
KN I FE BI S C HAVEZ
AN D LU
KI_1404_46 2/6/14 11:05 PM Page 46
Industry’s Largest
USA Steel Selection
More Steel Available at knifemaking.com
440C 18”
THICK WIDTH MILL FINISH
1/8”
1 1/2” CF518 $19.95
1/8”
2”
CF558 $24.95
5/32”
1 1/2” CF618 $22.95
5/32”
2”
CF658 $30.95
3/16”
1 1/2” CF718 $26.95
3/16”
2”
CF758 $34.95
1/4”
2”
CF958 $44.95
440C 36”
1/8”
1 1/2” CF536 $36.95
1/8”
2”
CF556 $47.95
5/32”
1 1/2” CF636 $43.95
5/32”
2”
CF656 $59.95
3/16”
1 1/2” CF736 $50.95
3/16”
2”
CF756 $65.95
1/4”
2”
CF956 $84.95
154CM 18”
1/8”
1 1/2” AF218 $26.95
1/8”
2”
AF228 $34.95
5/32”
1 1/2” AF318 $28.95
5/32”
2”
AF328 $39.95
3/16”
1 1/2” AF418 $35.95
3/16”
2”
AF428 $45.95
154CM 36”
1/8”
1 1/2” AF236 $51.95
1/8”
2”
AF246 $65.95
5/32”
1 1/2” AF336 $55.95
5/32”
2”
AF346 $75.95
3/16”
1 1/2” AF436 $66.95
3/16”
2”
AF446 $86.95
CPMS 30V 18”
1/8”
1 1/2” LF218 $32.95
1/8”
2”
LF228 $42.95
5/32”
1 1/2” LF318 $40.95
5/32”
2”
LF328 $56.95
3/16”
1 1/2” LF418 $51.95
3/16”
2”
LF428 $65.95
CPMS 30V 36”
1/8”
1 1/2” LF236 $62.95
1/8”
2”
LF246 $81.95
5/32”
1 1/2” LF336 $78.95
5/32”
2”
LF346 $107.95
3/16”
1 1/2” LF436 $96.95
3/16”
2”
LF446 $125.95
BLANCHARD
CU518 $25.95
CU558 $32.95
CU618 $28.95
CU658 $38.95
CU718 $32.95
CU758 $42.95
PRECISION
CG718 $31.95
CG758 $40.95
CG818 $34.95
CG858 $46.95
CG918 $38.95
CG958 $48.95
BLANCHARD
CU536 $48.95
CU558 $32.95
CU636 $55.95
CU658 $38.95
CU736 $62.95
CU758 $42.95
PRECISION
CG736 $60.95
CG756 $79.95
CG836 $67.95
CG856 $91.95
CG936 $74.95
CG956 $97.95
BLANCHARD
AU218 $32.95
AU228 $42.95
AU318 $34.95
AU328 $47.95
AU418 $41.95
AU428 $53.95
PRECISION
AG618 $38.95
AG628 $50.95
AG718 $40.95
AG728 $55.95
AG818 $47.95
AG828 $61.95
BLANCHARD
PRECISION
AU236 $63.95 AG636 $75.95
AU246 $81.95 AG646 $97.95
AU336 $67.95 AG736 $79.95
AU346 $91.95 AG746 $107.95
AU436 $78.95 AG836 $90.95
AU446 $102.95 AG846 $118.95
BLANCHARD
LU218 $38.95
LU228 $50.95
LU318 $46.95
LU328 $64.95
LU418 $57.95
LU428 $73.95
PRECISION
LG718 $44.95
LG728 $58.95
LG818 $52.95
LG828 $72.95
LG918 $63.95
LG928 $81.95
BLANCHARD
LU236 $74.95
LU246 $97.95
LU336 $90.95
LU346 $123.95
LU436 $108.95
LU446 $141.95
PRECISION
LG736 $86.95
LG746 $113.95
LG836 $102.95
LG846 $139.95
LG936 $120.95
LG946 $157.95
D2 18”
FINISHES
OFFERED IN
1/8”
1 1/2” YF318 $18.95
1/8”
2”
YF328 $24.95
5/32”
1 1/2” YF518 $21.95
5/32”
2”
YF528 $29.95
3/16”
1 1/2” YF718 $26.95
3/16”
2”
YF728 $34.95
1/4”
2”
YF818 $41.95
D2 36”
HOT ROLLED
MILL FINISH
1/8”
1 1/2” YF336 $35.95
1/8”
2”
YF346 $45.95
5/32”
1 1/2” YF536 $41.95
5/32”
2”
YF546 $56.95
3/16”
1 1/2” YF736 $50.95
3/16”
2”
YF746 $65.95
1/4”
2”
YF836 $72.95
CPM154 18”
BLANCHARD
GROUND
1/8”
1 1/2” PF218 $30.95
1/8”
2”
PF228 $39.95
5/32”
1 1/2” PF318 $39.95
5/32”
2”
PF328 $52.95
3/16”
1 1/2” PF418 $46.95
3/16”
2”
PF428 $60.95
PRECISION
GROUND
1/8”
1 1/2” PF236 $58.95
1/8”
2”
PF246 $76.95
5/32”
1 1/2” PF336 $72.95
5/32”
2”
PF346 $99.95
3/16”
1 1/2” PF436 $89.95
3/16”
2”
PF446 $116.95
WATER JET
CUT EDGES
1/8”
1 1/2” HF218 $33.95
1/8”
2”
HF228 $39.95
5/32”
1 1/2” HF318 $43.95
5/32”
2”
HF418 $58.95
3/16”
1 1/2” HF508 $51.95
3/16”
2”
HF518 $69.95
CPMS
IS A REGISTERED
TRADEMARK OF
CRUCIBLE INDUSTRIES
LLC
1/8”
1 1/2” HF236 $64.95
1/8”
2”
HF246 $83.95
5/32”
1 1/2” HF336 $80.95
5/32”
2”
HF436 $110.95
3/16”
1 1/2” HF506 $98.95
3/16”
2”
HF536 $128.95
CPM154 36”
BLANCHARD
XD318 $22.95
XD328 $29.95
XD518 $25.95
XD528 $34.95
XD718 $30.95
XD728 $39.95
XD818 $46.95
PRECISION
XD0815 $30.95
XD0820 $39.95
XD1015 $29.95
XD1020 $41.95
XD1215 $38.95
XD1220 $50.95
XD1620 $57.95
BLANCHARD
XD336 $43.95
XD346 $55.95
XD536 $49.95
XD546 $66.95
XD736 $58.95
XD746 $75.95
XD836 $89.95
PRECISION
XY0815 $59.95
XY0820 $81.95
XY1015 $65.95
XY1020 $88.95
XY1215 $74.95
XY1220 $97.95
XY1620 $112.95
BLANCHARD
DU218 $36.95
DU228 $47.95
DU318 $45.95
DU328 $60.95
DU418 $52.95
DU428 $68.95
PRECISION
PG718 $42.95
PG728 $55.95
PG818 $51.95
PG828 $68.95
PG918 $58.95
PG928 $76.95
BLANCHARD
DU236 $70.95
DU246 $92.95
DU336 $84.95
DU346 $115.95
DU436 $101.95
DU446 $132.95
PRECISION
PG736 $82.95
PG746 $108.95
PG836 $96.95
PG846 $131.95
PG936 $113.95
PG946 $148.95
CPMS 35VN 18”
BLANCHARD
HU218 $39.95
HU228 $47.95
HU318 $49.95
HU418 $66.95
HU508 $57.95
HU518 $77.95
PRECISION
HG218 $45.95
HG228 $56.95
HG318 $55.95
HG418 $74.95
HG508 $63.95
HG518 $85.95
CPMS 35VN 36”
BLANCHARD
PRECISION
HU236 $76.95 HG236 $88.95
HU246 $99.95 HG246 $115.95
HU336 $92.95 HG336 $104.95
HU436 $126.95 HG436 $142.95
HU506 $110.95 HG506 $122.95
HU536 $144.95 HG536 $160.95
S e e O u r C o m p l e t e L i n e O f K n i fe m a k i n g S u ppl i e s
Tools , Equipme n t, L eath ercr aft, E n g r avi n g , M ach i n er y, Bl ad es, Books,
A bra s iv e s , Vide o s, an d M o r e by d ow n l o ad i n g o u r d i g i ta l cat al og
online or re que st o u r fu l l co l o r p r i n t catal o g fo r o n ly $5. 00 post ag e .
KI_1404_47 2/6/14 11:06 PM Page 47
JANTZ
USA MADE
BLADE STEEL
440C
D2
154CM®
CPM3V®
CPM154®
CPMS90V®
CPMS30V®
CPMS35VN®
Water Jet
Cut Edges
Finishes Offered
Hot Rolled Mill
Blanchard Ground
Precision Ground
knifemaking.com
1-800-351-8900
KI-1404-48-79-SHOT 2/7/14 3:26 AM Page 48
The Best of
SHOT
BIGGER, STRONGER, SHARPER, FASTER
BY BETHANY MILLER, ABE ELIAS AND TERRILL HOFFMAN
PHOTOS COURTESY OF MANUFACTURERS
t was a record-breaking year for the Shooting, Hunting & Outdoor
Trade Show as some 67,000 professionals descended upon Las Vegas — 5,000 attendees more than last year. And it’s a safe bet no
one left disappointed.
I
At more than 1,600 exhibits, the newest, hottest outdoor and tactical products
were on display. Among countless guns, tools and survival accessories, knives
made a strong appearance.
We got to see, learn about, and play around with the blades leading the industry this year, from revamped classics to the most innovative new models — and
we’ve got the inside scoop on some of our favorites for our readers!
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 49
Photo by Dave Norman
The Best of SHOT
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 50
SOG KNIVES & TOOLS
www.sogknives.com
(425) 771-6230
OG may have had the broadest selection of offerings of the
companies we visited. We were shown everything from a
tiny key knife (it looks like a key, but contains a 1.5-inch
frame-lock knife) to a shovel that includes a saw blade, and
everything in between. We were particularly impressed with their
SOGfari machetes, one of which appears on the cover of this issue.
S
Kiku Small Fixed-Blade
OVERALL LENGTH: 9.8 inches
BLADE: 4.9 inches, AUS-8 stainless
steel with satin finish
HANDLE: Linen Micarta
WEIGHT: 8.5 ounces
Includes hard molded nylon sheath
MSRP: $188
BladeLight Hunt (knife with LED lights)
BLADE: 3.8 inches, 8Cr13MoV steel
WEIGHT: 4.3-ounces
LED: 35 lumens, 138 minutes run time
Includes leather sheath
MSRP: $92
SOGfari Cutlass
BLADE: 12.9 inches, 3Cr13 steel
WEIGHT: 15.3 ounces
Includes nylon sheath
MSRP: $35
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 51
The Best of SHOT
Exchange
Elite E-Tool (collapsible shovel/saw)
BLADE: Interchangeable skinning blade, fillet blade
and saw, all 8Cr13MoV steel
WEIGHT: 6.4 ounces
MSRP: $87
OVERALL LENGTH: 26 inches fully extended, 1075 carbon steel
WEIGHT: 24.8 ounces
Includes saw hidden in handle, nylon sheath
MSRP: $74
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 52
Blue Series 940/940-1
BLADE: 3.4 inches, S30V (940) and S90V (940-1) premium
stainless steel
HANDLE: Carbon fiber; stainless steel liners; anodized
aluminum barrel spacers
WEIGHT: 2.9 ounces
SPECIAL FEATURE: Ambidextrous AXIS Lock
MSRP: $215 (940), $310 (940-1)
BENCHMADE
www.benchmade.com
(800) 800-7427
hile many companies at SHOT debuted a select few
knives, Benchmade upped the ante by introducing new
knives in five series (Black, Blue, Gold, HK and Hunt). All
were designed to the utmost quality in Benchmade’s “three M’s”:
manufacturing, materials and mechanisms. Some may look familiar to longtime Benchmade users — classic designs tweaked and
updated according to customer feedback. Others, however, are
wholly new, such as the Gold line, which represents Benchmade’s
best quality and will only be produced until the end of 2014.
W
Hunt Series Saddle Mountain Skinner
BLADE: 4.2 inches, S30V premium stainless steel
HANDLE: Dymondwood
Includes molded Kydex sheath
MSRP: $155
Gold Series 710-141 AXIS
Commemorating the 15th anniversary of the original AXIS knife
BLADE: 3.9 inches, twist Damasteel
HANDLE: Carbon fiber with blue C-Tek inlay and anodized blue barrel spacer
WEIGHT: 4.3 ounces
MSRP: $600
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 53
The Best of SHOT
ESEE-CM6
ESEE KNIVES
BLADE: 5.88 inches, 1095 carbon steel with
textured black powder coat
HANDLE: Removable canvas Micarta
WEIGHT: 10 ounces
Includes Kydex sheath
MSRP: $240.95
www.eseeknives.com
(256) 613-0372
On the ESEE-CM6:
“This is the knife I
designed because I
always wanted it. It’s a
good crossover from
one thing to another.”
—TERRILL HOFFMAN
SLY STEEL
www.slysteel.com
(208) 681-1946
ly Steel may be a newcomer to the industry,
but their debut products are sure to give
them a strong foothold. Currently, their
catalog consists solely of two models — one
hunting, one tactical — of their Shark Tooth design, which the video demonstration at their
booth suggests is one heck of a knife. The tactical
model can easily break glass and penetrate
through sheet metal with excellent edge retention, and the unique handle on both versions ensures a grip that is almost impossible to lose.
S
W
Shark Tooth Tactical I
BLADE: 4.5 inches, 1095HC steel
HANDLE: Micarta
WEIGHT: 13 ounces
Includes Kydex sheath with rotating steel spring clip
MSRP: $229
Carl Elsener Sr. Explorer Knife
VICTORINOX
SWISS ARMY
OVERALL LENGTH: 3.1 inches (closed)
BLADE: Damascus steel
HANDLE: Swiss wood
WEIGHT: 0.2 ounces
TOOLS: Large blade, small blade,
corkscrew, can and bottle openers, small,
large and Phillips screwdrivers,
wire stripper, punch/reamer, key ring,
scissors, multi-purpose hook,
magnifying glass
MSRP: $299.99
www.victorinox.com
(800) 442-2706
asily the most noticeable news from Victorinox this year is its absorption of Wenger
Swiss Army, which has resulted in 52 new
Swiss Army knives titled the Delémont Collection.
“We’ve taken the best of both worlds,” says Jes
Feuer, Victorinox director of public relations and
communications. “We’ve owned stock in [Wenger]
since 2005, so this was the natural progression.”
E
On the merging of Victorinox Swiss Army and Wenger Swiss Army:
“We’ve taken the best of both worlds. [Victorinox has] owned stock in
[Wenger] since 2005, so this was the natural progression.”
—JES FEUER
e can’t help but be proud of the CM6, produced by ESEE, as it was conceptualized
by Knives Illustrated’s own Terrill Hoffman, who is not only an accomplished photographer and writer in the knife industry, but a designer
in his own right. “This is the knife I designed because I always wanted it,” he says. “It's a good
crossover from one thing to another.”
The company’s most prized product of the year is
the limited-edition Carl Elsener Sr. Explorer Knife,
a pocket multitool named for the grandson of
Victorinox’s founder. Elsener was the company’s
third CEO, succeeded by his son upon his passing in
June 2013. Engraved with Elsener’s signature, this
knife will have a limited run of 7,000 serialized
pieces — only 520 of which will be sold in North
America.
KI-1404-48-79-SHOT 2/12/14 3:52 AM Page 54
KERSHAW/ZERO TOLERANCE
www.kershaw.kaiusaltd.com
www.zerotolerance.kaiusaltd.com
(800) 325-2891
rue to form, Kershaw and its sister brand, Zero Tolerance, debuted a number of products that promise to
be not only reliable, but relatively affordable. Knife enthusiasts are most likely to be excited about three
of Kershaw’s newest collaborators: the folks from Duck Commander and Buck Commander, aka the Duck
Dynasty; Dmitry Sinkevich, whose Zero Tolerance 0454 was named the 2013 Overall Knife of the Year at the
Blade Show; and renowned, in-demand custom knifemaker Ernest Emerson, whose designs typically sell for upwards of $200, but will be available through Kershaw and Zero Tolerance for under $60.
T
Kershaw is also among the companies celebrating an anniversary in 2014. In honor of their 40 years in business,
they’ve desiged a folding knife that collectors are bound to snatch up as soon as possible. Named the Ruby 4040
(the ruby is the official stone for 40th anniversaries), it’s crafted from hard-to-obtain ZDP-189 steel. The handle
is titanium with DLL coating, laser etched for a striking appearance. For an additional eye-catching touch,
Kershaw’s four decades are symbolized with four ruby-red spacers. This knife is so new that no print-quality
photos were available at press time, so you’ll want to keep your eye out for Kershaw’s official introduction. No
more than 500 pieces will be produced, so it’s bound to go fast!
Kershaw Nura 3.5
Designed by Dmitry Sinkevich
BLADE: 3.5 inches, stainless steel with titanium carbo-nitride coating
HANDLE: Stainless steel with sanded titanium carbo-nitride coating
SPECIAL FEATURE: Nearly frictionless KVT ball bearing opening
MSRP: $59.99
Kershaw CQC-2K
Designed by Ernest Emerson
BLADE: 2.75 inches, 8CrMoV with black oxide coating
HANDLE: Black G-10 front, 410 black oxide coating back
SPECIAL FEATURE: Emerson’s signature thumb disc, wave-shaped
blade design, reversible pocket clip
MSRP: $49.99
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 55
The Best of SHOT
TRENDS OF SHOT
• Fierce-looking bushcraft blades
• Collaborations with in-demand custom
designers
• Multifunction knives; e.g. knives that double as
Zero Tolerance 0562
•
Designed by Rick Hinderer
BLADE: 3.5 inches, ELMAX powdered steel
HANDLE: Textured G-10 front, stonewashed titanium back
SPECIAL FEATURE: Nearly frictionless KVT ball bearing opening;
reversible, deep-pocket clip
MSRP: $250
flashlights, shovels with optional saw blades,
knives with exchangeable blades.
Companies commemorating their
anniversaries with intricately designed,
limited-edition knives
Kershaw CQC-7K
Designed by Ernest Emerson
BLADE: 3.25 inches, 8CrMoV, stonewashed and satin finish
HANDLE: Black G-10 front, 410 beadblasted finish back
SPECIAL FEATURE: Emerson’s signature thumb disc, tanto blade (a first for Kershaw)
MSRP: $59.99
Kershaw Camp 18
BLADE: 18 inches, powder-coated 65Mn
HANDLE: Full tang with rubber overmold
WEIGHT: 2 pounds, 14 ounces
Includes sheath
MSRP: $84.99
KI-1404-48-79-SHOT 2/7/14 3:27 AM Page 56
COAST LIGHTS, KNIVES AND MULTITOOLS
www.coastportland.com
(877) 704-4545
hen you buy a Coast product, you buy a product that was built to last (and one Coast backs
with a lifetime warranty). What could be better than a product designed to live as long as
you do? How about one that can perform multiple functions — for a price almost anyone
can afford? Those were the sorts of products that particularly caught our eyes at the Coast booth.
Specializing in both tools and flashlights, Coast has brought together the best of both worlds in the
form of a multitool and a knife, each outfitted with high-powered LED lights. And, of course, a selection of new knives up to Coast’s standards of reliability are waiting in the wings as well.
W
RX322
Designed by Ron Lake
BLADE: 3.9 inches, 5Cr15MoV stainless steel
HANDLE: Nylon-filled
SPECIAL FEATURE: Patented Max-Lock technology
which provides second lock; ambidextrous pocket clip
MSRP: $48.99
BX315
BLADE: 3.25 inches, 9Cr18MoV stainless steel
HANDLE: Poly-Steel TRP over hard nylon frame
WEIGHT: 3.6 ounces
Includes belt sheath
MSRP: $26.99
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 57
The Best of SHOT
LX237
BLADE: 2.7 inches, 3Cr13 stainless steel
HANDLE: Checkered fiberglass-filled nylon
WEIGHT: 1.7 ounces
SPECIAL FEATURE: Deep-carry pocket clip
MSRP: $13.99
LED122 Pocket Tool
BLADE: 3 inches, 3Cr13 stainless steel
HANDLE: Stainless steel
WEIGHT: 4.6 ounces
SPECIAL FEATURE: One built-in LED light at each end; two double-ended
screwdriver bits (Phillips and flathead); lanyard ring
Includes two CR1616 batteries
MSRP: $26.99
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 58
Legend
GERBER
www.gerbergear.com
(800) 950-6161
014 marks Gerber’s 75th anniversary, and they’re commemorating the auspicious milestone with a few special products: first, the 39 Series, described as “an ode to 1939” (the year the company was founded). These
streamlined, premium knives are designed to evoke the simple-yet-outstanding
craftsmanship of Gerber’s earliest products and are available in fixed-blade and
folding models.
2
The second and perhaps more notable product is the Legend, an elite hunting
knife. “It’s the best hunting knife Gerber has ever produced,” says Mike May,
media representative for Gerber, “but we’re going for the best hunting knife ever
made anywhere.” The Legend’s standout feature is its blade made from S35VN
steel, which is brand-new to the industry and of the highest quality. Only 1,200
pieces will be produced.
Also of interest to knife lovers on a budget will be Gerber’s Vital, a small
pocketknife with an exchangeable, razor-sharp blade. Its specialized locking
mechanism ensures the blade is at no risk of snapping — between this and the
large finger choil, it may well be the safest exchangeable-blade knife on the
market.
On Gerber’s 75th anniversary knife:
“It’s the best hunting knife Gerber has ever produced, but we’re
going for the best hunting knife ever made anywhere.”
—MIKE MAY
100 percent made in the USA
BLADE: 4 inches, CPM-S35VN
stainless steel
HANDLE: 3-D machined G-10 handle
with Oregon spalted maple inlay
WEIGHT: 6.1 ounces
Includes handmade Tanner Goods
sheath with puncture-proof insert,
custom storage box, lifetime
guarantee
MSRP: $750
39 Series Folder
BLADE: 3 inches, 420HC steel
HANDLE: Nickel-plated zinc
WEIGHT: 6.32 ounces
Includes genuine leather sheath
MSRP: $105
39 Series Pocket Knife
HANDLE: Nickel-plated zinc
WEIGHT: 4.1 ounces
MSRP: $90
Vital Pocket Folding Knife
BLADES: 2.8 inches, carbon steel
HANDLE: Rubber overmold
WEIGHT: 1.3 ounces
Includes six easily exchangeable #60 scalpel blades
MSRP: $20
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 59
The Best of SHOT
JANTZ
D2
#J4128 - $32.95
1095
#J4198 - $24.95
41
1095 Black Teflon
#J419K - $24.95
RN
CPMS 30V
#J4138 $42.95
blade
,
1” w
ide,
1/
8” t
hic
k.
PAT
TE
DAMASCUS
#J4189 - $79.95
JANTZ
5/8”, 3
”
CUSTOM
QUALITY
Overall 7
BLADES ARE
100% MADE IN USA.
FLAT GROUND FROM
THE BEST USA MADE
STEELS AVAILABLE
AND CRYOGENTICLLY
HEAT TREATED.
YOU WILL NOT
FIND A BETTER
PA
PRODUCT OR
era
ER
Ov
TT
VALUE.
ll 6
,
ade
” bl
5/8
42
”, 2
5/8
N
, 1 /8
k.
” thic
440C
#J4208 - $32.95
wide
D2
#J4228 - $32.95
7/8”
DAMASCUS
#J4289 - $69.95
1095
#J4298 - $24.95
1095 Black Teflon
#J429K - $24.95
Complete Your Blade With
Genuine 550 lb. Paracord.
Over 40 colors available at
WWW.KNIFEMAKING.COM
1-800-351-8900
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 60
PUMA KNIFE
COMPANY USA
www.pumaknifecompanyusa.com
(913) 888-5524
uma prides itself on knives that hit the
sweet spot between stylish simplicity and
functional durability, and its offerings at
the 2014 SHOT Show were no exception. We were
particularly impressed by Puma’s contributions to
the bushcraft category, which was fairly ubiquitous
at the show, in the form of two tough machetes
that any outdoorsman would want by his side. But
that’s not all Puma is doing this year: Their latest
hunting and tactical knives are sure to be strong
contenders as well.
P
Kukri17 Machete
BLADE: 3Cr13 stainless steel
HANDLE: Comolded scales with
protective guard
WEIGHT: 18.4 ounces
Includes ballistic sheath
MSRP: $29.99
In more general news, Puma announced that as of
2014, fellow German company MINOX USA will be
its exclusive distributor in North America.
White River 8
BLADE: 3.5 inches, 440A stainless steel
HANDLE: White bone
WEIGHT: 6.2 ounces
MSRP: $59.99
Bush23 Machete
BLADE: 15.9 inches, 3Cr14 stainless steel
HANDLE: Comolded scales with protective guard
WEIGHT: 22.1 ounces
MSRP: $39.99
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 61
The Best of SHOT
SW TAC Folder
BLADE: 3.4 inches, stonewashed 440A steel
HANDLE: Stonewashed stainless steel
WEIGHT: 6.3 ounces
MSRP: $29.99
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 62
COLUMBIA RIVER KNIFE & TOOL
www.crkt.com
ver prolific, CRKT had no shortage of innovative knives, tools and gear of all
sorts to show off at SHOT. They have continued to produce pieces in collaboration with their stable of custom designers, as well as embarking on new
collaborative efforts with designers such as Lucas Burnley and Ryan Johnson.
Inarguably, CRKT has covered an impressive amount of ground in its two decades
in business — something it’s celebrating this year with the Buy Tighe, a special
knife designed by elite custom craftsman Brian Tighe. Only 500 serialized pieces
will be produced throughout the year, so collectors, keep poised to grab one while
they last!
E
Eros SS Flat Handle - Small
Designed by Ken Onion
BLADE: 2 inches, AUS-8 steel with satin finish
HANDLE: 420J2 stainless steel
WEIGHT: 1.5 ounces
SPECIAL FEATURE: IKBS ball-bearing pivot system for smooth, fast opening
MSRP: $69.99
Fossil with Veff Serrations
Designed by Flavio Ikoma
OVERALL LENGTH: 8.9 inches (open)
BLADE: 4 inches, 8Cr13MoV with black EDP finish
HANDLE: Stainless steel with G-10 overlay
WEIGHT: 6.1 ounces
SPECIAL FEATURE: Ikoma’s patented IKBS ball-bearing pivot system for
smooth, fast opening; Veff Serrations; ergonomic handle
MSRP: $99.99
Buy Tighe
Designed by Brian Tighe
OVERALL LENGTH: 12.3 inches (open)
BLADES: 154CM with satin finish
HANDLE: 6Al-4V titanium; ti-nitride coated liner; blue and stainless steel finish
WEIGHT: 6.3 ounces
SPECIAL FEATURE: Dual blades — one drop-point, one recurve; patended Klecker lock
MSRP: $750
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 63
The Best of SHOT
BENCHMA D E .COM
Woods Kangee T-Hawk
Designed by Ryan Johnson of RMJ
Tactical
AXE: 4.2 inches, 1055 carbon steel
HANDLE: Tennessee hickory
WEIGHT: 1 pound 15.7 ounces
MSRP: $69.99
909
STRYKER
®
154CM
STAINLESS STEEL
Obake
Designed by Lucas Burnley
OVERALL LENGTH: 7.6 ounces
BLADE: 3.6 inches, 8Cr14MoV steel with etched gray titanium nitride finish
HANDLE: Paracord wrap
WEIGHT: 2.4 ounces
Includes glass-filled nylon sheath and black paracord with skull bead
MSRP: $59.99
AXIS® LOCK
+ÛÔÚÏÔÍ
G10 HANDLE
6ÇÉÚÏÉÇÒ
5ÛØÜÏÜÇÒ
/ÏÒÏÚÇØß
/ÇÉÎËÚËÙ
&ÛÚÒËØß
$ÍØÏÉÛÒÚÛØÇÒ
(ÓÖÏØË5ÚØËËÚ21%ÕÞ
)ØÇÔÑÒÏÔÜÏÒÒË0u
2+
ÌÇÞ
-ÔÏÌËÙÇÒËÙ#ÕÔÚÇØÏÕÑÔÏÌËÉÕÓ
K N I F E
ÝÝÝÕÔÚÇØÏÕÑÔÏÌËÉÕÓ
C O M P A N Y
MADE IN THE USA
©2014 BENCHMADE KNIFE CO.
OREGON CITY, OR, USA
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 64
FOX KNIVES USA
ox Knives USA may be an offshoot of an Italian company,
but its products reflect nothing less than all-American
pride. Each knife is manufactured from high-quality steel
and handle materials, and designed with military and special
forces particularly in mind. Three particularly noteworthy lines
are coming from Fox this year — all impressively fierce in both
function and aesthetics. One of our favorites is Fox’s collaborative effort with Danish custom knifemaker Jens Anso.
F
Olympian Series
BLADE: 3.5 inches, 154CM steel
HANDLE: Cocobolo or G-10
WEIGHT: 6.2 ounces
SPECIAL FEATURE: Can be custom
engraved for an additional $25
MSRP: $195 (cocobolo) or $205 (G-10)
Anso Flipper Folder
BLADE: 3.5 inches, N690Co steel
HANDLE: Titanium (also available in black G-10 or Santos wood)
WEIGHT: 6.5 ounces
SPECIAL FEATURE: Can be custom engraved for an additional $25
MSRP: $254
Photo by Terrill Hoffman
Amico Series
BLADE: 3.25 inches, 154CM steel (available
in various styles)
HANDLE: FRN (available in various colors)
WEIGHT: 2.5 ounces
SPECIAL FEATURE: Can be custom
engraved for an additional $25
MSRP: $116
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 65
The Best of SHOT
TOPS KNIVES
www.topsknives.com
(208) 542-0113
ach year at the SHOT Show, TOPS Knives debuts a number of new designs in the tactical, everyday carry, hunting and outdoor categories. This year’s releases feature a
number of collaborations with custom makers, in addition to TOPS factory designs.
No doubt there’ll be something for everyone among the company’s newest offerings!
E
Tahoma Field Knife
Designed by Andy Tran
with black river-wash finish
HANDLE: Tan canvas Micarta
WEIGHT: 1 pound 2 ounces
MSRP: $219.95
The Lioness
HANDLE: Black G-10
WEIGHT: 3.6 ounces
MSRP: $129.95
HOG 4.5
Designed by Gunnery Sergeant Dave
“Norseman” Williams
BLADE: 4.4 inches 1095HC steel
HANDLE: Black linen Micarta
WEIGHT: 8.3 ounces
MSRP: $179.95
KI-1404-48-79-SHOT 2/7/14 3:28 AM Page 66
ONTARIO KNIFE COMPANY
www.ontarioknife.com
(800) 222-5233
ntario has hit the ground running for 2014, introducing a small set of knives at SHOT with many more
groundbreaking options to come mid-season. This first batch of products includes both older models upgraded with better opening systems, as well as brand-new designs. As an additional kickstart to their
year, Ontario has welcomed to its management team Paul Tsujimoto, a design and engineering specialist with a
long career history in the cutlery industry.
O
Ratia
BLADE: 3.5 inches, AUS-8 stainless steel (available in black and satin finish)
HANDLE: G-10
WEIGHT: 5.25 ounces
SPECIAL FEATURES: New Tactical Assist Open (TAO) designed by Joe Pardue
MSRP: $79.95 (satin finish), $81.95 (black finish)
Bushcraft Field Knife
BLADE: 5 inches, 5160 steel
HANDLE: Walnut
WEIGHT: 15.4 ounces
Includes nylon sheath, 21-foot paracord, firestarter
MSRP: $139.95
Chimera
BLADE: 8.25 inches
HANDLE: Kraton
WEIGHT: 1 pound 7 ounces
POINT OF INTEREST: Like its mythical namesake, the OKC Chimera is composed from
the parts of other things. If you look closely, you can identify features of knives already in Ontario’s line.
MSRP: $149.95
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 67
The Best of SHOT
BROWNING
www.browning.com
(800) 333-3288
ost years, Browning expands its selection of knives significantly; for
example, last year they introduced an entirely new line in its
Black Label tactical division. This year, they are bringing just
one knife to the market, but it’s one that has been a long time coming. The knife, called the Buckmark, is a straightforward folder
made to celebrate the Browning’s well-known Buck Mark emblem. Each year the company holds a “Show us your Buck Mark”
contest that draws astounding entries — everything from
Buck Mark tattoos to driveway markings.
M
Buckmark
BLADE: 3.25 inches, 440 stainless steel
HANDLE: Injection-molded composite
WEIGHT: 4.8 ounces
SPECIAL FEATURES: The textured handle
bears a repeated Buck Mark emblem
MSRP: $28
Spyderco Consistently Delivers
Safe, Reliable, High-Performance.
Period.
820 Spyderco Way
Golden, Co 80403
800.525.7770
www.spyderco.com
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 68
MORAKNIV
www.industrialrev.com/morakniv
(888) 297-6062
wedish company Morakniv has been making its way into the North American market for years.
Recently, they’ve been able to ride the wave of the growing popularity of bushcraft knives. For
2014, Morakniv has brought out three new models, all of which are variations on previous years’
offerings. Notable changes include their very first serrated option, as well as blacked-out blades.
S
Bushcraft Black
BLADE: 4.3 inches carbon steel with black coating
HANDLE: Rubber injection molded
WEIGHT: 5.7 ounces
Includes harness with plastic sheath
MSRP: $69.99
Bushcraft Black Tactical
BLADE: 4.3 inches carbon steel black
blade
HANDLE: Injection-molded rubber
WEIGHT: 6.3 ounces
SPECIAL FEATURES: Partially
serrated blade
Includes MOLLE-compatible sheath
MSRP: $79.99
Bushcraft Pathfinder
BLADE: 6 inches
HANDLE: injection-molded rubber
WEIGHT: 8.8 ounces
MSRP: $130
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 69
The Best of SHOT
5.11 TACTICAL
www.511tactical.com
(866) 451-1726
n the last few years, 5.11 Tactical has ventured beyond its established comfort zone as a general tactical supplier. They’ve
entered the knife market full steam with a number of offerings
— most notably the KOLD Khukri zombie knife. Their 2014 selection is modest, but what they lack in volume they make up
for in quality. Among these new products is the company’s first-ever assisted opener in two models,
as well as a knife multitool called the Double Duty Quick Fix.
I
Double Duty Quick Fix
BLADE: 3.75 inches, AUS-8 black
oxide finish
HANDLE: Black FRN with
injection moulded TPR inlay
WEIGHT: 5.6 ounces
TOOLS: Glass breaker, wrench,
screwdriver, oxygen wrench, scale,
web cutter, bottle opener
MSRP: $84.99
HALLMARK CUTLERY
www.hallmarkcutlery.com
(866) 583-3912
allMark Cutlery is the Little Company that Could. They may be small and family-owned, but that hasn’t
stopped them from producing knives that rival some of the best on the tactical and outdoor market.
They owe their quality in part to smart collaborations with custom designers — for example, with Sean
Kendrick and David Mosier on their Bad Blood line. Both are in high demand for their independent knifemaking
businesses (Mosier so much so that he’s not currently taking new orders), but HallMark offers users a chance
not only to acquire one of their designs, but to do so at very affordable prices.
H
Bad Blood Crossfire Tanto
Designed by David Mosier
BLADE: 3.75 inches, 8Cr14
HANDLE: Contoured G-10
SPECIAL FEATURE: Pocket clip
MSRP: $84.99
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 70
CAMILLUS
www.camillusknives.com
(877) 412-7467
stalwart of the knife industry, Camillus has built a reputation upon knives and tools that have proven
they can withstand the test of time — and any other task demanded of them. A new year brings new
products and new collaborations, but the same quality customers have come to trust, embodied in a few knives sure
to appeal to outdoor and tactical
users alike.
A
Tyrant
Designed by Grant and Gavin Hawk
BLADE: 3 inches, D2 steel with nonstick carbonitride titamium coating
HANDLE: Composite G-10
SPECIAL FEATURES: Lanyard hole with paracord loop, lifetime warranty
Includes leather sheath with built-in sharpener
MSRP: $69.99
EDC3
BLADE: 3 inches, AUS-8 steel with carbonitride titanium coating
HANDLE: Stainless steel
SPECIAL FEATURES: Partial serration, dual thumb stud for
ambidextrous opening, lifetime warranty
MSRP: $23.99
Jolt
BLADE: 3.25 inches, D2 steel with
nonstick carbonitride titanium coating
HANDLE: Carbon fiber
SPECIAL FEATURES: Liner lock, dual thumb stud for ambidextrous opening,
lifetime warranty
MSRP: $99.99
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 71
The Best of SHOT
Find us on
Be prepared when disaster strikes.
www.facebook.com/americansurvivalguidemagazine
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 72
BUCK KNIVES
www.buckknives.com
(800) 326-2825
uck considers 2014 a “transition” year, as they are planning how to translate their rich 100-year history into a
thriving future (moving towards more of an emphasis in
the hunting category next year). As such, their new products
were limited at SHOT, but what they lacked in quantity, they
made up for in quality. Their most tantalizing offering for knife
users is a special edition of their classic, much-beloved 110 Folding Hunter.
B
Collectors also won’t want to miss the 500-piece
run of the Thorn, a particularly beautiful little
folding knife. Meanwhile, on the tactical
side, the Marksman feature’s Buck’s
brand-new Strong Lock System,
which makes this folding knife
as strong as a fixed-blade
when open.
Thorn
Designed by Mark McLean
BLADE: 3 inches, blued 5160 alloy steel
HANDLE: CNC machined Rosewood
Dymondwood and stainless steel
WEIGHT: 1.7 ounces
SPECIAL FEATURES: Serialized, includes
certificate of authenticity
Includes genuine distressed leather sheath
MSRP: $200
110 Folding Hunter
50th anniversary edition
BLADE: 3.75 inches, 420HC stainless steel
HANDLE: Macassar ebony Dymondwood
with brass bolsters
WEIGHT: 7.2 ounces
SPECIAL FEATURES: Anniversary blade
stamp and handle medallion
Includes genuine leather sheath
MSRP: $73
Marksman
Designed by Grant and Gavin Hawk
BLADE: 3.5 inches, 154CM steel
HANDLE: Black anodized aluminum
WEIGHT: 4 ounces
SPECIAL FEATURES: Ball bearing system
for quick, easy opening; Strong Lock System
MSRP: $150
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 73
The Best of SHOT
KA-BAR
www.kabar.com
(716) 372-5952
he name KA-BAR is all but synonymous with no-nonsense, reliable, militarygrade knives, and they’ll continue to deliver on that expectation in 2014 — with
the added help of some new custom collaborators such as Rick Hinderer and Mike
Snody. KA-BAR has a fairly vast selection of products lined up for the year — largely revamped versions of familiar products, but there’s a number of new, exciting things knife
users will want to add to their arsenals as well.
T
Adventure Parangatang
Designed by Steve Johnson
BLADE: 14.1 inches, 1095 Cro-Van steel
HANDLE: Molded plastic
Includes tan Cordura sheath
MSRP: $155.63
Hinderance
Designed by Rick Hinderer
BLADE: 3.6 inches, 1095 steel
HANDLE: Molded plastic
Includes MOLLE-compatible sheath
MSRP: $111.56
Big Boss
Designed by Mike Snody
BLADE: 4.6 inches, S35V premium stainless steel
HANDLE: Zytel
MSRP: $217.54
KI-1404-48-79-SHOT 2/7/14 3:29 AM Page 74
CONDOR TOOL & KNIFE
www.condortk.com
(407) 354-3488
Crotalus
t’s been only a decade since Condor Tool & Knife entered the American cutlery market, but they can
trace their roots all the way back to 1787 and Solingen, Germany. Starting as GEBR WEYESBERG
COMPANY in Solingen, they developed a reputation for their quality swords, military knives, and
household cutlery. As the world’s largest manufacturer of swords and knives, they expanded their operations by forming Imacasa and building a new plant in Santa Ana, El Salvador in 1964. The Central
American operations were sold in the 1980’s to local investors.
I
HANDLE: Micarta with hollow pins
MSRP: $94.98
Today, Imacasa is one of the largest machete and shovel manufacturers in the world operating 24
hours a day, 7 days a week. In 2004, Imacasa developed a line of tools and knives for the North
American and Condor Tool & Knife was born. Today, Condor continues the tradition by bringing out
new models dedicated to fulfilling the needs of the American outdoorsman.
Solobolo
BLADE: 9 inches, 1075 carbon steel
HANDLE: Micarta
MSRP: $94.98
W.R. CASE
www.wrcase.com
(800) 523-6350
he granddaddy among American-made
knife companies, W.R. Case continued to expand its legacy at SHOT as it celebrates its
125th year in business. This year, knife users can
expect to see more variations on the classic, compact knives and multitools they know and love.
Particularly of note is Case’s commemorative series of knives to mark their anniversary. These
knives will be made to order, their handles emblazoned with a special-edition logo.
T
Peach Seed Tear Drop
Designed by Tony Bose
OVERALL LENGTH: 3.6 inches closed
BLADE: Tru-Sharp surgical steel
HANDLE: Jigged amber bone
WEIGHT: 2.3 ounces
MSRP: $63
Case is also once again partnering
with award-winning custom
knifemaker Tony Bose on a
selection of “near-custom”
knives in a signature Tear Drop
pattern.
KI-1404-48-79-SHOT 2/7/14 11:20 AM Page 75
The Best of SHOT
Cutting Edge Artists Choose Tormach Mills
Knifemakers around the world are using Tormach PCNC milling machines to add new dimensions to
their craft. Today’s top blade artists are embracing CNC technology to shape and sculpt blades and
handles, cut precision blade locks and other mechanisms,
and customize designs with engraving and detail.
Tormach PCNC 1100 Series 3
starting at
$8480
(plus shipping)
Follow knifemaker John Grimsmo as he
makes his own knives with a PCNC 1100 on
his web series, Knifemaking Tuesdays, at
www.tormach.com/kmt.
Shown here with optional
stand, LCD monitor, machine
arms, and accessories.
Grimsmo Knives milling a fixed blade, called
The Tor, on a Tormach PCNC 1100.
www.tormach.com/knives
125th Anniversary Peanut
Discover the
Premier Knife
Magazine
BLADE: Clip and pen, Tru-Sharp surgical steel
HANDLE: Smooth olive green bone
WEIGHT: 1.2 ounces
MSRP: $64
Visit our new website Today!
KI-1404-48-79-SHOT 2/7/14 3:30 AM Page 76
SPYDERCO
www.spyderco.com
(800) 525-7770
pyderco was the last company we visited at SHOT, and what they showed us was worth the wait. Best
known for their impeccably designed folding knives, strategic collaborations with both established
and up-and-coming knifemakers, and trademark “Spyderco hole” on every blade, this Golden, Colorado-based company continues to build on what its loyal customers have already come to love, as well as
venturing into some new territory.
S
The latter includes the Domino, which is only the third flipper-opening knife Spyderco has ever produced; the
Tatanka, its longest folder to date; the Tusk, a unique knife, designed primarily for sailors, that has been 30
years in the making; and much more. We’re excited to see what lies ahead for Spyderco in 2014 and beyond!
Tusk
BLADE: 3.4 inches, LC 200 N steel
HANDLE: Titanium
WEIGHT: 4.2 ounces
SPECIAL FEATURES: Marlin spike,
shackle key, ambidextrous tip-down clip
MSRP: $399.95
Kiwi4
BLADE: 2.9 inches, VG-10 steel
HANDLE: G-10 scales
WEIGHT: 1.9 ounces
SPECIAL FEATURES: Double finger choil,
back lock, reversible clip
MSRP: $259.95
IN CASE YOU MISSED IT…
Photo highlights from our time at SHOT
are posted on our Facebook page and on
Instagram!
• www.facebook.com/knivesillustrated
• www.instagram.com/knivesillustrated
(or search @knivesillustrated on your
mobile app)
KI-1404-48-79-SHOT 2/7/14 3:30 AM Page 77
The Best of SHOT
Roc
Designed by Serge Panchenko
HANDLE: G-10 scales with skeletonized steel liners
WEIGHT: 4.2 ounces
SPECIAL FEATURES: Adjustable pocket clip, Michael
Walker LinerLock
MSRP: $199.95
Mike Draper Folder
Designed by Mike Draper
HANDLE: Machined, anodized titanium
WEIGHT: 4.7 ounces
SPECIAL FEATURES: Michael Walker LinerLock
MSRP: $499.95
Battlestation
Designed by Alexandru “Dialex” Diaconescu
BLADE: 3 inches, VG-10 steel
HANDLE: G-10 scales
WEIGHT: 4.5 ounces
SPECIAL FEATURES: Reversible clip, back,
back lock
MSRP: $319.95
KI-1404-48-79-SHOT 2/7/14 3:31 AM Page 78
Olakniven
HELLE OF NORWAY
www.knifeworks.com/helleknives
(888) 225-9775
elle has a long tradition of producing knives
for the outdoorsman and craftsman. All of
their knives have a certain elegant style, from
their straight workhorses to their more decorative
presentation pieces. Ultimately, Helle’s knives are always functional, combining old-world charm with solid, dependable construction. With such a deep offering of products, Helle ensures any knife user or
collector who passes by must stop for a second look.
H
BLADE: 2.2 inches, triple-laminated
stainless steel
HANDLE: Birch (stick tang
construction)
WEIGHT: 1.6 ounces
SPECIAL FEATURES: Small finger
groove to ensure better grip
MSRP: $89
TOR
BLADE: 4.2 inches, triplelaminated stainless steel
HANDLE: Birch with leather
washers (stick tang construction)
WEIGHT: 4.3 ounces
Includes deep, traditional-style
dangler pouch sheath.
MSRP: $169
EDITOR’S CHOICE
We saw, held, played with, heard about and were impressed by countless
knives at SHOT, but a few particularly stood out — because of their
innovation, because of their ease of function, or because they’re just
plain cool. Here’s a list of our top 10 picks (alphabetically by company).
1. Thorn (Buck Knives)
2. LED122 Pocket Tool (Coast Lights, Knives and Multitools)
3. Woods Kangee T-Hawk (CRKT)
4. Legend (Gerber)
5. Bad Blood Crossfire Tanto (HallMark Cutlery)
6. Emerson CQC-2K (Kershaw)
7. Shark Tooth Tactical I (Sly Steel)
8. SOGfari Cutlass (SOG Knives & Tools)
9. Tusk (Spyderco)
10. Carl Elsener Sr. Explorer Knife (Victorinox)
KI-1404-48-79-SHOT 2/7/14 3:31 AM Page 79
The Best of SHOT
Sylvsteinen
OVERALL LENGTH:
9.64 inches
BLADE: 5.3 Inches
triple laminated
stainless steel
HANDLE: Curly birch
and antler (stick tang
construction)
WEIGHT: 5.3 oz
SPECIAL FEATURES:
Amongst some of
Helle’s larger offerings
the Sylvstienen is still
light and nimble and
comes with traditional
leather pouch sheath
with protective insert.
MSRP: $169.99 KI
PROVEN,
LIKE THE
TEAMS THAT
USE THEM.
FORGED
OUT OF TRADITION.
HARDENED
IN THE FIELD.
HONED
FROM EXPERIENCE.
SOG knives and tools are born of the military, preferred
by U.S. Special Forces teams for decades. So whether
you’re answering the call of duty or arming yourself with
innovation, lead the way with SOG. sogknives.com
TAKE POINT.
TM
KI-1404-80-AD INDEX 2/7/14 3:52 AM Page 80
AD INDEX
Back
Issues
Available
Bear and Son Cutlery
95
Ontario Knife Company
63
Benchmade Knife Company, Inc.
63
Pat Crawford Knives
67
Blue Ridge Knives
67, 80
Randall Made Knives
80
Cas Iberia
3
SOG Specialty Knives
33, 79
Coast Products
39, 81
Southeastern Custom Knife Show 75
Colonial Knife Company
41
Spyderco Inc.
67
HallMark Cutlery
59
Tandy Leather Factory
33
Jantz Supply
46-47, 59
TOPS Knives
9, 83
Kershaw Knives
84
Tormach LLC
75
Knife and Gun Finishing Supply
33, 41
Tru-Grit, Inc.
79
Knife Center Of The Internet
71
W.R. Case & Sons Cutlery Co.
2, 33
Niagara Specialty Metals
71
Call us at
1-800-764-6278
Order
your
copy
7RGʋɨ
7
RG
R
Gʋ
G
ʋɨ
ʋ
ɨ
Call us at: 1-800-764-6278
KI_1404_81 2/6/14 11:22 PM Page 81
Visit our new website today!
www.KnivesIllustrated.com
The premier
knife magazine
s The hottest knives and latest
innovations in steel and design
sThe latest news, views, and reviews
sHard testing of knives and the results
KI-1404-82-READERS 2/10/14 4:25 AM Page 82
SHOW
& TELL
Show & Tell appears at the end of every issue of
Knives Illustrated. In it, readers tell us about their
favorite knives from their personal collections. Interested in showing off your knife? Email Bethany
Miller at bmiller@beckett.com.
BY KI STAFF
PHOTOS COURTESY OF MARK MCCOOL
ABOUT THE OWNER
Name: Mark McCool
Residence: Kalkaska, MI
Occupation: Sheriff Deputy
ABOUT THE KNIFE
Manufacturer: Whiskers Custom Knives
Model: Bolster Release
How long have you had this knife?
I’ve been carrying the custom-made Bolster Release since
November 2013.
What made it catch your eye?
I discovered this knife after ordering a set of custom pistol grips
from Pyro Grafix. I loved the look of the grips so much, I asked if
he could create the same scales for a knife handle. I then learned
Pyro Grafix collaborated with Whiskers Custom Knives on a folder
with a similar scale. I immediately placed an order with Whiskers.
What’s its most unique feature or your favorite feature?
The most unique feature of this knife is the gold teeth. I asked Mike
Allen (“Whiskers”) whether, if I sent him the gold, could he incorporate it into the teeth of the scale. I recovered the gold during a
significant event in my life, so having it as a reminder when I look
at my knife makes it real special!
How do you use this knife?
Although I consider the knife a collector's piece, I can't seem to
leave home without it. In my collection of custom knives that I have
been accumulating over the course of 10 years, I have purchased
hunters, Bowies, frontier-style folders and tactical folders. I consider this knife a "dress tactical,” and it’s by far my most prized piece.
I use this blade any time I get a chance. Even though it has not been
needed to cut a seat belt to rescue a victim from a burning car, it
sure can slice through the top of my dog food bags with ease!
Who else would you recommend a knife like this to and why?
I like to have knives for all purposes, whether hunting, camping,
hard use or just for daily carry. If you're the sort of person to often
find yourself to be in a dangerous spot, you need a dangerous knife.
That’s who I recommend should carry a similar piece. And when
you take a dangerous knife, add a custom skull handle scale and
bling it out with gold teeth — it just puts you a cut above the rest! KI
!""#$%&''()*+,',-%+.&'%/,*0-%+.&&%/%1'& 2
3
KI_1404_C3 2/6/14 11:26 PM Page C3
KI_1404_C4 2/6/14 11:25 PM Page C4
Self-reliance is self-evident. Rebellion
has a cause. Being prepared is a way
of life. Being tested is to be expected.
Fear is to be embraced. One opinion
counts. Independence goes without
saying. And there are no excuses.
Check out our new
BlackWash™ series
SERIES
KERSHAWKNIVES.COM

Knives Illustrated - April 2014 USA

Transcription

Similar documents

Dec - Ft Myers Knife Club (FMKC)

Paper Lanterns

production planning

Made in Solingen Germany

We originally manufactured these for Herter`s Inc

shinosky Knives - Engraving School

shark pocket knives - Hardware Merchandisers

a 6-page article

Fine Purveyors of Japanese Knives and Kitchen Tools

COMMANDER`S MESSAGE By P/C Frank Marobella, AP Janet Goss