Whitby Brouchure USA Final2.indd

Ice Cream Trucks
renowned throughout the world
01
Introduction
Ice Cream Trucks play a part in everyone’s life somewhere
along the line. Whether young or old, each and every individual
has a fond ice cream memory. Ice Cream Trucks (or Vans
as they are known elsewhere) first came into existence at
the beginning of the 20th Century. Since then they have
established themselves firmly in today’s society.
Ice Cream Trucks offer you the flexibility of vending in a variety of locations
allowing you to take the ice cream to the people. And you are not just limited
to ice cream; these custom built trucks allow you to sell the exact products
your customers want.
David Cummins USA are the agents for the Americas continent on behalf
of UK Company Whitby Morrison. David Cummins has in excess of 45 years
experience of the ice cream mobiling industry, with 10 of those as based
in Florida.
Whitby Morrison are the manufacturers of the Ice Cream Trucks; established
in 1962 in the UK, our products have been exported to in excess of 60
countries around the world. This is clear proof that you can invest in a Whitby
Morrison-built Ice Cream Trucks with absolute confidence. A dedicated team
of the UK’s finest craftsmen ensure that Whitby Morrison Ice Cream Trucks
are the finest available in the world today.
The very latest Chevrolet Cargo Express Van is used as the base for the
Ice Cream Truck. This is then converted with a hardwearing but lightweight
fibreglass body and kitted out with the highest spec refrigeration system
available in the ice cream mobiling industry. Coupled with the fuel-efficient
DDS system and latest Carpigiani soft ice cream machine, these Trucks really
are the highest performing and reliable vehicles of their kind anywhere in
the world.
The Cummins Chevrolet
03
Key Features
04
Inside the Ice Cream Truck
07
Enhance your sales potential
08
Carpigiani Soft Ice Cream
09
Whitby Morrison
10
02
The Cummins Chevrolet
The Cummins Chevrolet is built using the tried and
tested Express Van model. GM offer a 5year/100,000 mile
warranty service with all vehicles registered in the US.
Featuring the Vortec 4.8L V8 engine with a 31USG fuel
tank, the van also includes a 105Amp Alternator, antilock
disc brakes, power steering and the Chevrolet Electronic
Stability Control System as standard.
Once stripped to its basics the van begins its conversion process. This
starts with the fitting of the fully moulded GRP bodywork; lightweight and
hard wearing this material has proved the most successful and long lasting
in ice cream mobiling. The bodywork demonstrates 50 years of traditional
Cummins styling from the UK. Experience has shown that a touch of
nostalgia coupled with the very latest vehicle provides a winning formula
for success.
Inside, the Ice Cream Truck is completed with a fully lined easy clean interior.
This ensures lightweight construction, as well as a bright and spacious
working environment. The counters and shelving within the interior of the Ice
Cream Trucks are assembled using a laminate finish. This ensures a hard
wearing and easy-to-clean environment for the vendor. This is the preferred
form of construction for Health Departments around the World.
The refrigeration system is the highest standard available within the ice
cream mobiling industry. Each vehicle is fitted with a 17 cu ft cold plate deep
freeze and separate chill with an ice compartment for cold drinks. These are
operated using R404a through the independent system. An overnight charge
via 110 V mains and thermostat control ensures they remain at the correct
temperature. Most important of all is that there is no need for a gas guzzling
generator or other auxiliary power.
03
The Cummins ice cream truck comes complete with the latest Carpigiani
soft ice cream freezer – the highest performing truck machines available
today. With twin barrels allowing the vendor to offer single and twist cones,
these machines are easily capable of delivering 400 large cones every hour!
The Carpigiani is powered by our Patented DDS (Direct Drive System).
Through the use of various pulleys and an electromagnetic clutch system,
the machine can be continually operated whilst the vehicles engine remains
running at idle – very fuel efficient. This eliminates the requirement for any
generator power and ensures the machine remains constantly available for
serving – unlike electric machines, which often require lag time to refreeze.
Our DDS has revolutionised the ice cream mobiling industry; it allows you to
take the ice cream to the people, no matter where they may be.
All Cummins Chevrolet Ice Cream Trucks are professionally painted and
liveried by our in-house design team. With approximately 10,000 vans
completed between them, they are capable of recreating anything! The
decision of how the van is completed rests with you.
With many years of experience in the ice cream mobiling industry, David
Cummins USA and Whitby Morrison have learnt to construct vehicles
that are fully compliant with even the most stringent of health and safety
regulations. Along with a highly experienced after sales team and technical
backup service, these Ice Cream Trucks really are the way to go.
3
4
5
2
1
6
1 ‘Whitby Morrison patented DDS’
Eliminating the need for any auxiliary power.
2 ‘Cummins Styling’
Traditional British Ice Cream Van bodywork features.
3 ‘Carpgiani soft ice cream machine’
The ultimate high performance ice cream freezer.
4 ‘Paintwork and sign writing”
A professional finish ensuring your truck looks the best.
5 ‘Light-weight and hardwearing GRP bodywork’
Built to last and stand the test of time.
6 ‘Highest standard refrigeration system’
Accurately set thermostat to your chosen temperature.
04
05
06
Inside the Ice Cream Truck
The inside of the Ice Cream Truck is your workplace;
therefore it is vitally important that it is comfortable and
enables you to operate the Truck to it’s fullest potential.
The interior is fully insulated and lined. Our fibreglass products have a
smooth gelcoat finish, which gives the vendor an easy clean 1-wipe surface
to work with. This hard wearing surface ensures product longevity and
cleaning requirements are kept to a minimum. Finished in white, the roof
lining also ensures a light and bright interior. The laminate-finished shelving
and work surface is hand built and installed to the exact requirement of
the individual customer.
A typical Cummins Ice Cream Truck will be fitted with the very latest
Carpigiani soft ice cream machine. Manufactured in Italy exclusively for
Whitby Morrison, these machines really are the best performing units
available today. They are operated via the patented DDS and will allow you
to serve soft ice cream all day without the need for a generator or any
other auxiliary power.
07
All trucks have a stainless steel, 17 cu ft cold plate freezer, with four double
lids, fitted as standard. This custom manufactured refrigeration system has
been developed so that following an overnight charge, the freezer is frozen to
the desired temperature. The eutectic holdover tank construction maintains
the operating temperature for the following working day. A chilled storage
with stainless steel interior is fitted alongside each freezer. With two doors
and a lid, this is perfect for storing drinks and liquid ice cream mix. As with
the freezer the eutectic holdover tank design maintains the temperature
throughout the working day. All freezers and chillers have colour-coded
fibreglass lids and doors. These are hand built and of course fully insulated
and hardwearing.
In all cases the specification for your new Cummins Ice Cream truck will
comply with the most stringent of health and safety regulations. Truly built
to last, by some of the UK’s finest craftsmen, it is not uncommon to see a
truck of 20 or even 30 years of age operating as efficiently today as the
day it was first put on the road.
Enhance your sales potential
In today’s fast moving society, image is everything.
Therefore it is important that you optimise your sales
potential through the image and equipment carried
by your Cummins Ice Cream Truck.
First and foremost, the livery of your Truck is what first attracts people’s
attention. We can recreate almost anything that you would like to see
displayed on your Truck. The possibilities are almost endless; it is for you
to decide what your customers would like to see.
Other options available for the exterior include roof mounted illuminated
cones, tinted window glass, wind out sun canopy and flashing ‘SLOW’
children crossing road safety sign.
Inside the Truck, the shelving and counterwork arrangements are the main
priority for today’s discerning ice cream vendor. We can custom manufacture
this exactly to you requirement. Other options include storage cupboards,
hand wash sinks and cash till systems and of course those all important
musical chimes! Our 12 V to 110 V power inverter is a popular option
allowing other equipment to be operated within the ice cream truck. Ice
Shavers, Candyfloss machines, Popcorn makers, Microwave ovens
and Roller grills all help to enhance the sales potential of your truck.
With over fifty years experience in the ice cream mobiling business we
can guide you to the ultimate specification, making your new Cummins Ice
Cream Truck the best investment you’ve ever made.
08
Carpigiani
Our high performance soft ice cream freezers are
manufactured exclusively for us, by Carpigiani in Italy.
Working closely with Carpigiani, we have combined
our technology and experience to develop the very best
high output soft ice cream machines.
The Carpigiani Van Super Tre is fitted to all our soft ice cream trucks and has
twin high performance freezing cylinders, ‘R’ type pumps and multi element
beater blades. This two-flavour machine allows the vendor the flexibility to
offer two-flavoured ‘twist’ ice cream, or a simple single flavour.
Powered by our DDS, the Cummins ice cream truck allows you to take your
freshly made soft ice cream to the people wherever they may be. For indoor
or special event operations, an additional electric motor drive system is
available. This provides the option to power the soft ice cream machine from
an on-site power.
These fantastic machines are unique to the market and should not be
confused with the lower performance electronically operated ‘shop’ machines.
09
Whitby Morrison
Whitby Specialist Vehicles was founded in 1962 by Bryan
Whitby as a manufacturer of Soft Ice Cream Machinery and
one-off custom vehicle bodywork.
As time has progressed, our range of products and services has been
carefully developed to reflect changing market requirements. Designs are
refined and new ideas incorporated with a constant endeavour to pre-empt
future requirements. The current range of Whitby Morrison mobiles and
equipment are considered ‘World Class’ and are produced by some of the
UK’s finest craftsmen. Every product is manufactured to the exact preference
of the customer, making it truly bespoke.
Constant high demand and continued repeat business from around the
world has led to further expansion. Our factory is purpose-built with separate
moulding, fabrication, refrigeration, vehicle build and finishing facilities, whilst
confidential research and development is conducted in our own independent
design centre. As the demands of the market develop, so does the capacity
for innovation and level of in-house ability. Ice Cream Vehicles are the core
product of Whitby Morrison, alongside Trailer Kiosks and Tricycles. We also
continue to develop our involvement in manufacturing unique vehicles to
satisfy growing requirements and preferences within the trade.
Today, Bryan’s son Stuart is Managing Director and in 2005 Bryan’s eldest
Grandson, Ed, became the first from a third generation of the Whitby family
to join the Company. These three generations and their workforce continue
their work together, with that same belief: ‘we produce the very best, or we
produce nothing at all’. However, clear in our minds is that it is important to
move and adapt with the changes; without such the customer cannot be
satisfied.
10
David Cummins USA inc.
159 East Lakeshore Blvd.
Kissimmee, FL 34744, USA
T: 407 301 4435
F: 407 344 7874
www.davidcumminsusa.com
www.whitbymorrison.com
US Patent and Trademark Office
Cummins Ice Cream Truck
August 19th 2008
US PATENT D575, 197