Opening - Canadian Woodworker.

Transcription

Opening - Canadian Woodworker.
Now Open in Edmonton & Saskatoon
grand
opening
celebration
What’s
Inside:
Showcasing
our Tool
suppliers
Fantastic
Savings
Prizes only
at our
Saskatoon
& Edmonton
stores
Grand Opening
• Chance to WIN
a Trend Airshield Pro
Prices at
all Stores
• WIN one of 5
Grex P630
23 Gauge
Pin Nailers
• Enter free
draw for great
door prizes
show times
Edmonton/Calgary/Winnipeg:
Saskatoon:
Fri, Sept. 25th • 9am-6pm
Sat, Sept. 26th • 9am-6pm
Sun, Sept. 27th • noon-5pm
Fri, Oct. 2nd • 9am-6pm
Sat, Oct. 3rd • 9am-6pm
Sun, Oct. 4th • noon-5pm
SASKATOON
4 – 805 Circle Drive Saskatoon, SK S7K 3S4
T: 306-979-4000 • F: 306-979-4904 • TF: 877-979-4990
E-mail: Saskatoon@canadianwoodworker.com
EDMONTON
4920 99th Street N.W. Edmonton, AB T6E 3N6
T: 780-702-3000 • F: 780-702-0373 • TF: 877-711-3001
E-mail: Edmonton@canadianwoodworker.com
• Shop direct with
our factory reps
and save big $$$
WINNIPEG
1054 Portage Avenue, Winnipeg MB R3G 0S3
T: 204-786-3196 • F: 204-783-6867 • TF: 800-665-2244
E-mail: Winnipeg@canadianwoodworker.com
CALGARY
105E – 58th Avenue SE, Calgary, AB T2H 0N8
T: 403-255-8743 • F: 403-255-8753 • TF: 877-255-8743
E-mail: Calgary@canadianwoodworker.com
GREAT
www.canadianwoodworker.com
DOOR CRASHERS
2
24 only
PONY 3/4" PIPE CLAMP FIXTURE • Reg. $19.95 $13.50
10 only
SAMONA 2" 23 GAUGE PIN NAILER • Reg. $99.95 $55.00
2 only
BOSCH “COLT” PALM ROUTER (2 per store) • Reg. $179.95 $89.95
4 only
BOSCH 18 VOLT LITHIUM DRILL/IMPACT COMBO KIT (Has 3-Batteries and 30 Min. Charger) • Reg. $479.95 $339.95
4 only
BOSCH 10" SLIDING COMPOUND MITER SAW (With FREE Miter Saw Stand) • Reg. $499.95 $449.95
3 only
BOSCH 3 1/4" CLIPPED HEAD FRAMING NAILER • Reg. $469.95 $359.95
6 only
Dremel 4000 Series V.S. Kit (With FREE Flex Shaft) • Reg. $129.99 $124.95
8 only
Dremel Multi-Max Oscillating Tool kit • Reg. $139.99 $119.95
4 only
GREX 1 3/16" 23 GUAGE HEADLESS PINNER • Reg. $219.95 $150.00
6 only
FEIN MULTI-MASTER DELUXE KIT • Reg. $495.00 $399.95
8 only
WIXEY REMOTE DIGITAL READOUT FOR ROUTER TABLES • Reg. $99.95 $60.00
6 only
WIXEY DIGITAL FENCE READOUT • Reg. $169.95 $95.00
24 only
TITEBOND III WOOD GLUE GALLON • Reg. $53.95 $30.00
24 only
TITEBOND II GALLON • Reg. $31.95 $24.00
15 only
TITEBOND GLUE GAL. • Reg. $24.95 $18.00
5 only
TREND AIRSHIELD PRO FACE SHIELD (Breath Clean Air and stay Cool) 8 hr Run Time • Reg. $499.95 $395.00
4 only
TREND 16" DOVETAIL JIG (Does Half Blind, Through, and Variable Space Dovetails) Made by Akeeda • Reg. $398.95 $225.00
4 only
TREND ULTIMATE DIAMOND SHARPENING KIT (Can Sharpen Carbide and HSS Tools) • Reg. $293.75 $195.00
10 only
EXCALIBUR PRECISION MITER GUIDE (Fits Most Table Saws) • Reg. $149.95 3 only
EXCALIBUR 49" SLIDING TABLE ATTACHMENT • Reg. $1,199.95 $675.00
5 only
GENERAL 6" DELUXE LONG BED JOINTER • Reg. $949.95 $679.95
3 only
GENERAL 14" BANDSAW 2-SPEED 1 HP • Reg. $999.95 $729.95
4 only
NEW GENERAL 1 3/4 HP “GRANITE TOP” CABINET SAW W/30" FENCE • Reg. $1,659.95 $1,124.95
2 only
GENERAL 15" HELICAL PLANER 3HP • Reg. $2,999.95 $2,299.95
4 only
GENERAL 12" VARI-SPEED MAXI LATHE • Reg. $799.95 $599.95
4 only
GENERAL 1 HP 600 CFM DUST COLLECTOR • Reg. $349.95 $249.95
24 only
GENERAL MOBILE MACHINERY BASE • Reg. $79.95 4 only
P.C. 5/8"- 2" 18 GAUGE BRAD NAILER KIT • Reg. $129.95 $111.95
4 only
P.C. 1 1/2" 18 GAUGE STAPLER KIT • Reg. $149.95 $119.95
3 only
P.C. 3/4"- 2 1/2" 16 GAUGE BRAD NAILER • Reg. $199.95 $154.95
6 only
P.C. 2 1/4HP VS ROUTER KIT (comes with Plunge Base, Fixed Base, Height Wrench and Case) • Reg. $399.95 $319.95
$99.95
$60.00
3 only
P.C. 3 1/4HP 5 SPEED FIXED BASE ROUTER • Reg. $499.95 $419.95
2 only
P.C. 3 1/4 HP 5 SPEED PRODUCTION PLUNGE ROUTER • Reg. $559.95 $449.95
P.C. PLATE JOINER BISCUITS # 0/10/20 and ASSORTED (1000 per Box) • Reg. $43.95 5 only
P.C. DELUXE HINGE ROUTING KIT (Up to 9' Doors & 3-4 Hinges) • Reg. $429.95 $329.95
3 only
P.C. 2HP 6 GAL. “PANCAKE” COMPRESSOR (With FREE PIN100 Pin Nailer) • Reg. $249.95 $199.95
4 only
DEWALT 20" SCROLL SAW (Complete with Stand and Lamp) • Reg. $899.95 $619.95
4 only
DEWALT 2 1/4HP V.S. ROUTER COMBO KIT (Fixed Base, Plunge Base, and Case) • Reg. $319.95 $249.95
6 only
DEWALT 13" THICKNESS PLANER • Reg. $724.95 $529.95
3 only
DELTA 1/2 HP CHISEL MORTISER • Reg. $389.95 $329.95
2 only
DELTA 20" V.S. DRILL PRESS (Includes Mail In FREE Porter Cable Tool) • Reg. $1,199.95 $969.95
3 only
DELTA DUST COLLECTOR 1 1/2HP 1200CFM (Includes Mail In FREE Porter Cable Tool) • Reg. $639.95 $499.95
4 only
CROWN 5 PC BOXED SET W/ 12 1/2" BEECH HANDLES • Reg. $239.95 $159.95
CMT 8"X 12T FLAT BOTTOM DADO SET • Reg. $239.95 $125.00
CMT 10" X 24T GLUE LINE RIP BLADE • Reg. $105.95 $55.00
CMT 10"X 80T MELAMINE BLADE • Reg. $172.95 $90.00
CMT 12"X 90T COMPOUND MITER SAW CARBIDE • Reg. $227.95 6 only
CMT BASIC POCKET HOLE JIG SYSTEM • Reg. $128.95 2 only
CMT 6PCE ULTIMATE KITCHEN CABINET DOOR SET • Reg. $569.95 $275.00
2 only
CMT ROUTER BIT SET FOR MAKING CROWN MOLDING • Reg. $734.95 $359.00
2 only
CMT ROUTER BIT SET FOR MAKING INTERIOR MAN DOORS • Reg. $523.95 $255.00
DUST COLLECTION HOSE 2 1/2" X 10' • Reg. $35.00 $20.00
DUST COLLECTION HOSE 4" X 10' • Reg. $40.00 $22.00
DUST COLLECTION HOSE 4" X 20' • Reg. $80.00 $40.00
$33.00
$115.00
$75.00
3
www.canadianwoodworker.com
table of
CONTENTS
Showcasing Great
Products and
Great Prices
pages 5-11
New Tools
pages 8-9
CW Goes
Industrial
pages 12-13
Laguna Tools
Now at CW
pages 14-15
2009
Canadian Woodworker
Grand Opening Celebration
W
ow…what a difference a year makes!!
I can’t believe I am writing this letter
to tell you about our brand new stores we
have opened in Edmonton and Saskatoon.
We now have 4 great stores to serve you
from, in three provinces, including our
stores in Calgary and Winnipeg. This is
a huge step for us. It is honestly the most
exciting thing that has happened to my
sister, father and I in our collective business
careers. To celebrate we have a great sales
event planned for you with unbelievable
specials and savings to take advantage of.
We were originally going to have the grand
opening sales in just the two new stores but
we were so excited about the deals we got
from our suppliers we just had to share the
savings with our customers in Winnipeg
and Calgary too! The only difference is that
the prizes and factory reps will only be in
the two new stores. The door crashers and
sale prices though, are for all four stores!!
I want to welcome our new customers in
Edmonton and Saskatoon! We have been
in the woodworking tool supply business
since my father started the company in
Winnipeg back in 1967. We are a family
owned and operated business in its second
generation. It is now owned by me and
my sister Erin Taylor. We began as a saw
sharpening and industrial tool sales business
and over the years have evolved into a retail
and industrial supply store for hobbyist to
commercial woodworkers.
Our stores are specifically designed for, and
dedicated to, woodworking enthusiasts.
We have a designated “book store” area
for selling our books and plans, and a great
selection of tools for woodworkers. We have
carving, wood burning and woodturning
tools, hand tools, saw blades, router bits,
clamps, and power tools and machinery.
In addition to our new stores we have added
a number of new tools to our selection too!
We now have Bosch, Dremel, RotoZip
and Fein power tools and SawStop, Rikon,
Laguna Tools, and Safety Speed Cut
woodworking machinery. We also added a
great line of air tools from Grex. They make
the best 23 gauge pin nailers on the planet.
Have a browse through our flyer and mark
down all the tools you just can’t pass up.
You will see all the new brands we have
for you as well as information about our
new Industrial/Educational division. We
now have a team of knowledgeable people
to help our school teacher and industrial
customers in all three provinces.
I look forward to meeting as many of you I
can at our awesome Grand Opening events
in Saskatoon and Edmonton and welcome
you to our new stores!
Cole Moore
you are formally invited to attend our
grand opening
celebration
5
5
$
$
beaver
beaver
bucks
bucks
This voucher entitles you to $5.00 off any purchase of $25.00 or more. Limit one coupon per customer. Valid in Edmonton Sept. 25, 26 and 27/09
and in Saskatoon Oct. 2, 3 and 4/09 ONLY. Not applicable to books or magazines. Not valid with any other promotion
fantastic
SALES
PANASONIC
Panasonic Li-Ion Jig Saw (No Battery or Charger) • Reg. $289.95
Panasonic 14 Volt Li-Ion Drill • Reg. $429.95
Panasonic 21.6 Volt Lithium Hammer/Driver Drill Kit • Reg. $589.95
5 qty Panasonic 14 V Li-Ion Combo Kit • Reg. $619.95
$229.95
$324.9
$469.95
$469.95
Bench Dog Cast Iron Table Saw Router Table Extension
(Fits 27" Table Saws) • Reg. $529.95
Bench Dog Aluminum Router Table Insert Plate • Reg. $84.95
$375.00
$70.00
Byrd Tool
Adjustable Clamp Company
Jorgensen Quick Grip/Spreader Clamp 6"-36" • Reg. $27.50-44.95
Jorgensen Hd Series Steel Bar Clamp 6"-36" • Reg. $16.95-25.95
Pony 1/2" Pipe Clamp Fixture • Reg. $16.95
24 Pony 3/4" Pipe Clamp Fixture • Reg. $19.95
Pony 3/4" Deep Reach Pipe Clamp • Reg. $23.95
Jorgensen I-Beam Clamps 24" - 72" • Reg. $44.95-61.95
Jorgensen Cabinet Master Clamps 12"-60" • Reg. $51.95-82.95
Pony Band Clamp (2/Pkg) • Reg. $17.95
Jorgensen Miter Clamp • Reg. $34.95
Jorgensen Angle Clamp • Reg. $34.95
$16.95-22.95
$11.95-18.95
$10.95
$13.50
$15.95
$30.95-42.95
$33.95-54.95
$10.95
$23.95
$25.95
Bench Dog
2 Bench Dog Phenolic Top Router Table Package • Reg. $689.95
Bench Dog Cast Iron Router Table w/Steel Stand
Bench Dog and "Woodpecker" Router Lift • Reg. $1,319.95 Bench Dog Cast Iron Router Table
w/Birch Cabinet and “Woodpecker” Router Lift • Reg. $1,459.95
Bench Dog Saw Blade Changing Tool For Table Saws • Reg. $19.95
Bench Dog Offset H.D. Push Stick • Reg. $28.95
Bench Dog Featherboard • Reg. $29.95
Bench Dog T-Slot Featherboards (Pack Of Two) • Reg. $37.95
Bench Dog Crown Molding Cutting Jig New • Reg. $54.95
$559.00
$995.00
$1,295.00
$15.00
$20.00
$23.50
$27.50
$40.00
13" Carbide Helical Planer Head
(For The Dewalt Dw735 Planer) • Reg. $599.95
Byrd 6" Carbide Helical Jointer Head
(For The Delta 37-265X Jointer) • Reg. $499.95
Byrd 8" Carbide Helical Jointer Head
(For The Delta Dj20 Jointer) • Reg. $599.95
Byrd 15" Carbide Helical Planer Head
(For The Delta 22-780X Planer) • Reg. $999.95
CMT
CMT 10" X 24T Glue Line Rip Blade • Reg. $105.95 CMT 10"X 60T Plywood Blade • Reg. $128.95 CMT 10" X 40T Combination Blade • Reg. $121.95
CMT 10"X 50T Combination Blade • Reg. $118.95 CMT 12"X 60T Combination Blade • Reg. $174.95 CMT 10"X 80T Melamine Blade • Reg. $172.95 CMT 12"X 96T Melamine Blade • Reg. $229.95 CMT 10"X 80T Compound Miter Saw Blade • Reg. $169.95 CMT 12"X 90T Compound Miter Saw Carbide • Reg. $227.95 CMT 10" X 24T Thin Kerf Rip Blade • Reg. $64.95 CMT 10" X 42T Thin Kerf Combination Blade • Reg. $82.95 CMT 10" X 50T Thin Kerf Combination Blade • Reg. $88.95 $449.95
$449.95
$549.95
$949.95
$55.00
$75.00
$60.00
$60.00
$99.00
$90.00
$120.00
$85.00
$115.00
$35.00
$45.00
$45.00
5
www.canadianwoodworker.com
CMT 10" X 60T Thin Kerf Plywood Blade • Reg. $106.95 CMT 12" X 72T Thin Kerf Miter Saw Blade • Reg. $151.95 CMT 10" X 80T Thin Kerf Fine Finish Blade • Reg. $132.95 CMT 8"X 12T Flat Bottom Dado Set • Reg. $239.95 CMT 8"X 24T Precision Dado Set (Includes Case,
6-4T Chippers and Shim Set) • Reg. $399.95 $55.00
$75.00
$70.00
$125.00
CMT 32 mm 5 Spindle Line Boring Head
(Drill Shelf Holes…Attaches To Hing Drill Jig) • Reg. $329.95 CMT Deluxe Pocket Hole Drilling System • Reg. $324.95 CMT Basic Pocket Hole Jig System • Reg. $128.95 $225.00
Crown Woodturning Tools
CMT 4" Biscuit Joiner Blade • Reg. $32.95 $20.00
CMT 14" X 108T Sliding Panel Saw Blade • Reg. $249.95 $150.00
CMT Scoring Saw Blade Set (100-125mm) • Reg. $237.95 $150.00
CMT Carbide Dowel Drill Bits • Reg. $17.95 $10.00
CMT 35mm Carbide Hinge Drilling Bit (10mm Or 1/2" Shank) • Reg. $48.95 $30.00
CMT 12 Pce Metric Forstner Bit Set • Reg. $152.95 $75.00
CMT hss Planer and Jointer Knives 4" - 20"
(Sets Of Three) • Reg. $32.95-180.00 $25.00-120.00
CMT 1/2" Router Collet Extension • Reg. $79.95 $55.00
CMT Spiral Router Bit Set • Reg. $379.95 $225.00
CMT 13-Pce Deluxe Router Bit Set (1/2" Shank) • Reg. $499.95 $250.00
CMT Slot Cutter Set • Reg. $164.95 $90.00
CMT 3-Pce Kitchen Door Set (5/8" Door) • Reg. $329.95 $155.00
CMT 3-Pce Kitchen Door Set with Back Cutter (3/4" Door) • Reg. $374.95 $185.00
CMT 6Pce Ultimate Kitchen Cabinet Door Set • Reg. $569.95 $275.00
CMT Router Bit Set For Making Crown Molding • Reg. $734.95 $359.00
CMT Router Bit Set For Making Interior Man Doors • Reg. $523.95 $255.00
CMT Finger Joint Bit • Reg. $189.95 $99.00
CMT Tongue and Groove Set • Reg. $131.95 $75.00
CMT Tenon Cutting Set • Reg. $209.95 $99.00
CMT Grand Rabbeting Bit Set • Reg. $236.95 $125.00
CMT Window Sash Router Bit Set • Reg. $239.95 $125.00
CMT Formula 2050 Saw Blade Cleaner • Reg. $16.95 $10.00
CMT Manual Hinge Drilling Jig
(Used with A Hand Drill Or Drill Press) • Reg. $399.95 6
$255.00
$159.00
$75.00
$295.00
All Crown
Individual
Woodturning
Tools 10% Off
Crown 5 Pc Boxed Set w/ 12 1/2" Beech Handles • Reg. $239.95 Crown 5 Pc. Boxed Set "Pm Series" w/ 12 1/2"
Black Ash Handles • Reg. $449.95 Crown 8 Pc Boxed Set w/ 12 1/2" Beech Handles • Reg. $399.95 Delta
3 qty Delta 1/2 hp Chisel Mortiser • Reg. $389.95 2 qty Delta 20" V.S. Drill Press
(Includes Mail In Free Porter Cable Tool) • Reg. $1,199.95 3 qty Delta Professional 14" Bandsaw
(3/4 hp Motor and Stand) • Reg. $899.95 2 qty Delta 18" Drum Sander w/Stand
(Includes Mail In Free Porter Cable Tool) • Reg. $1,699.95 2 qty Delta 10" Left Tilt Cabinet Saw (w/1 3/4 hp Motor and
T2 30" Fence) (Includes Mail in Free Porter Cable Tool) • Reg. $1,639.95 $159.95
$299.95
$279.95
$329.95
$969.95
$729.95
$1,299.95
$1,299.95
2 only New Delta 3hp Left Tilt Unisaw 52" Cut w/Table Drawer
and Legs (Includes 2- Mail in Free Porter Cable Tools) • Reg. $3,999.00 $3,599.95
3 only New Delta 12 1/2" Midi-Lathe 1 hp V.S. • Reg. $859.95 $699.95
3 only Delta 1hp Deluxe Dust Collector w/Canister Filter
(Includes Mail In Free Porter Cable Tool) • Reg.$649.95 $529.95
3 only Delta Dust Collector 1 1/2hp 1200cfm
(Includes Mail In Free Porter Cable Tool) • Reg. $639.95
$499.95
3 only Delta 1250 Cfm 3- Speed Air Cleaner • Reg. $589.95 $469.95
3 only Delta 12" Vs Bench Drill Press • Reg. $409.95 $339.95
4 only Delta 6" V.S. Bench Grinder • Reg. $152.95 $129.95
4 only Delta 8" V.S. Bench Grinder
(w/Lamp and White Wheel) • Reg. $229.95 $199.95
4 only Delta 6" Portable Bench Top Jointer • Reg. $413.95 $339.95
3 only Delta Bench Top Oscillating Spindle Sander • Reg. $394.95 $339.95
3 only Delta 12 1/2" Portable Thickness Planer • Reg. $399.95 $339.95
Delta Mortising Attachment (For Drill Presses) • Reg. $149.95 $99.95
Delta Magnetic Lamp (Attach To Any Machine For More Light) • Reg. $29.95 $25.00
Dewalt
4 only Dewalt 20" Scroll Saw (Complete with Stand and Lamp) • Reg. $899.95 $
619.95
2 only Dewalt Hd Orbitol Jig Saw Kit • Reg. $209.95 $169.95
4 only Dewalt 2 1/4hp V.S. Router Combo Kit
(Fixed Base, Plunge Base, and Case) • Reg. $319.95 $249.95
3 only Dewalt 3 1/4hp V.S. Plunge Router • Reg. $389.95 $299.95
6 only Dewalt 13" Thickness Planer • Reg. $724.95 $529.95
2 only Dewalt 13" Planer w/ Dw7350 Stand • Reg. $999.95 $749.95
3 only Dewalt 13" Planer with Byrd Helical Head
(Head Not Installed) • Reg. $1,299.95 $975.00
Porter-Cable
4 only P.C. 5/8"- 2" 18 Gauge Brad Nailer Kit • Reg. $129.95 $111.95
4 only P.C. 1 1/2" 18 Gauge Stapler Kit • Reg. $149.95 $119.95
3 only P.C. 3/4"- 2 1/2" 16 Gauge Brad Nailer • Reg. $199.95 $154.95
4 only P.C. 1" 23 Gauge Pin Nailer • Reg. $139.95 $79.95
2 only P.C. 1/2" Upholstery Stapler • Reg. $149.95 $119.95
3 only P.C. Compressor/Nailer Combo
(Compressor, Hose and 2" Brad Nailer) • Reg. $329.95 $239.95
3 only P.C. Compressor/Finish/Brad Nailer Kit
(Compressor, 2 1/2" Nailer, 2" Nailer) • Reg. $329.95 $269.95
3 only P.C. 2hp 6 Gal. “Pancake” Compressor • Reg. $249.95 $199.95
2 only P.C. 150 Psi Oil Lube Horizontal 20 Gal Compressor • Reg. $779.95 $
669.95
2 only P.C. 150 Psi 25 Gal Vertical Compressor • Reg. $589.95 $499.95
2 only P.C. 135 Psi 60 Gal Cast Iron Oil Lube Compressor • Reg. $999.95 $829.95
2 only P.C. 6hp 80 Gal Cast Iron Oil Lube
175 Psi Compressor • Reg. $1,379.95 $1,249.95
4 only P.C. 1/4 Sheet Sander • Reg. $84.95 $67.95
5 only P.C. 5" Orbital Sander w/Case • Reg. $119.95 $94.95
6 only P.C. 5" Low Profile Professional Orbital Sander • Reg. $209.95 $149.95
6 only P.C. 2 1/2" X 14" Mini Belt Sander • Reg. $184.95 $119.95
3 only P.C. 3"X 21" V.S. Belt Sander • Reg. $264.95 $199.95
2 only P.C. 4" X 24" V.S. Belt Sander • Reg. $399.95 $339.95
5 only P.C. Plate Joiner w/Tilt Fence
(Works with Minature Biscuits Too) • Reg. $369.95 $249.95
P.C. Plate Joiner Biscuits # 0/10/20
and Assorted (1000 Per Box) • Reg. $43.95 $33.00
4 only P.C. Laminate Trimmer • Reg. $179.95 $149.95
7
New
TOOLS @ Canadian Woodworker
FEIN
www.canadianwoodworker.com
3 only Fein Multi-Master Starter Kit • Reg. $280.00
$229.95
2 only Grex 1 1/4" Laminate Flooring Stapler • Reg. $258.95
$179.95
2 only Grex 1/4" Crown 1 9/16" Stapler • Reg. $279.95
$199.95
2 only Grex T-50 3/8" Crown 5/8" 20 Gauge Stapler
(Shoots T-50 Staples) • Reg. $159.95
$114.95
2 only Grex 22 Gauge Uphlolstery Stapler 3/8" Crown • Reg. $149.95 $119.95
2 only Grex 7/16" Crown 2" 16 Gauge Sheathing Stapler • Reg. $369.95 $259.95
4 only Grex 2" Orbital Air Sander (Fantastic For
$119.95
Woodturners Runs On 2.2 Cfm) • Reg. $159.95
2 only Grex 2" Disc Sander/Die Grinder • Reg. $129.95
$99.95
Dremel Tools
6 only Fein Multi-Master Deluxe Kit • Reg. $495.00
2 only Fein Turbo I Shop Vac 6 Gallon
(With Power Tool Auto Start/Stop) • Reg. $399.95
2 only Fein Turbo Ii Shop Vac 9 Gallon
(With Power Tool Auto Start/Stop) • Reg. $519.95
1 only Fein Turbo Iii Shop Vac 15 Gallon
(With Power Tool Auto Start/Stop) • Reg. $569.00
Grex Air Tools
8 only Dremel Multi- Max Oscillating Tool Kit • Reg. $139.99
4 only Dremel 300 Series V.S. Kit • Reg. $99.99
$119.95
$84.95
6 only Dremel 4000 Series V.S. Kit
(With Free Flex Shaft) • Reg. $129.99
Dremel Lithium-Ion Cordless Tool Kit • Reg. $119.99
Dremel Dual Temp Glue Gun Kit • Reg. $32.99
Dremel Engraver • Reg. $29.99
Dremel Shaper/Router Table • Reg. $39.99
Dremel Flex-Shaft • Reg. $35.99
Dremel Sharpening Attachment Kit • Reg. $21.99
Dremel Woodburner Kit • Reg. $33.99
$124.95
$99.95
$26.95
$21.95
$34.95
$30.95
$15.95
$27.95
$399.95
$339.95
$439.95
$499.95
4 only Grex 1 3/16" 23 Guage Headless Pinner • Reg. $219.95
$150.00
$219.95
8 only Grex 1 3/8" 23 Gauge Headless Pinner • Reg. $299.95
10 only Grex 2" 23 Gauge Headless Pinner
(With Auto Lock Out) • Reg. $489.95
$349.95
Grex 5/8"-2" 23 Gauge Pin Nails (2.5M/Pkg) • Reg. $9.95-19.95
$6.95-17.95
2 only Grex Pneumatic 2" Hardwood Flooring Stapler • Reg. $499.95
$369.95
Rotozip
5 only Rotozip Drywall Router • Reg. $99.99
Rotozip Rz!00 Spiral Saw Tool Kit • Reg. $149.99
Rotozip 18 V Litheon Cordless Tool • Reg. $249.99
8
$79.95
$134.95
$219.95
Rikon Tools
6 only Rikon 10" Benchtop Bandsaw • Reg. $329.95
4 only Rikon 1 Hp 2-Speed 12" Bandsaw • Reg. $899.95
4 only Rikon 1 Hp 2 Speed 14" Bandsaw • Reg. $749.95
4 only Rikon 14" 1 1/2 Hp Resaw Bandsaw • Reg. $1,149.95
2 only Rikon 6" Jointer • Reg. $649.95
6 only Rikon 4" X 6" Belt/Disc Sander • Reg. $189.95
3 only Rikon 6" X 10" Belt/Disc Sander With Stand • Reg. $519.95
2 only Rikon 12" Disc Sander • Reg. $299.95
4 only Rikon 12" X 16" Mini Lathe • Reg. $439.95
Bosch
$259.95
$779.95
$599.95
$899.95
$499.95
$159.95
$399.95
$239.95
$349.95
Safety Speed Cut
Ssc Hot Air Edgebander (Power Feed and
Top/Bottom Trimming) • Reg. $10,595.00
1 only Ssc Glue Pot Edgebander
(Power Feed and Top/Bottom Trimming) • Reg. $13,995.00
1 only Ssc 60" Cut Vertical Panel Saw
(c/w Stand and Wheels) • Reg. $3,195.00
$9,495.00
$12,995.00
$2,295.00
Sawstop
2 only Sawstop 10" Contractor Saw w/ Cast Wings
and 52" Fence • Reg. $2,799.95
1 only Sawstop Professional 3 Hp
Cabinet Saw w/52" Fence and Table Extension • Reg. $3,699.95
2 only Sawstop 10" 3Hp Industrial Saw w/ 52" Fence,
Rails, and Extension Table • Reg. $4,695.00
(Only 2 Sawstop Industrial Saws Per Store)
$2,150.00
$3,295.00
$3,795.00
Free Miter
Saw Stand
with any
Bosch Miter
$30.00
Saw
Bosch 25' 12 Gauge Extension Cord • Reg. $44.95
$60.00
Bosch 50' 12 Gauge Extension Cord • Reg. $79.95
1 only Bosch 5/8" Vsr Hammer Drill Kit • Reg. $169.95
$139.95
4 only Bosch V.S Orbital Jigsaw Top-Handle • Reg. $249.95
$199.95
$139.95
2 only Bosch Recipricating Saw Kit • Reg. $179.95
2 only Bosch 7 1/4" Left Hand Circular Saw • Reg. $225.00
$139.95
2 only Bosch 3 1/4" Planer w/Case • Reg. $299.95
$199.95
2 only Bosch “Colt” Palm Router (2 Per Store) • Reg. $179.95
$89.95
4 only Bosch “Colt” V.S. Palm Router Kit • Reg. $199.95
$149.95
5 only Bosch V.S. 2 1/4Hp
Plunge/Fixed Base Router Combo Kit • Reg. $429.95
$319.95
$499.95
2 only Bosch V.S. 3 1/4 Hp Plunge Router • Reg. $559.95
3 only Bosch “Flushcut” Power Handsaw • Reg. $189.95
$149.95
3 only Bosch 10" Portable Table Saw w/Gravity Rise Stand
$699.95
and Digital Readout • Reg. $859.95
4 only Bosch 10" Sliding Compound Miter Saw • Reg. $499.95
$449.95
4 only Bosch 10" Dual Bevel Sliding Compound Miter Saw • Reg. $769.95 $649.95
2 only Bosch 12" Dual Bevel Compound Miter Saw • Reg. $549.95
$499.95
3 only Bosch 12" Dual Bevel Sliding Compound Miter Saw • Reg. $869.95 $759.95
2 only Bosch “Gravity-Rise” Miter Saw Stand w/Wheels • Reg. $399.95 $299.95
1 only Bosch “Power Box”
(Charger/Stereo/Cd Player w/Remote) • Reg. $299.95
$239.95
3 only Bosch 4V “Max Litheon” Screwdriver • Reg. $129.95
$104.95
3 only Bosch 12V "Max" I-Driver Kit • Reg. $249.95
$179.95
3 only Bosch 12V "Max Pocket Driver" Kit • Reg. $199.95
$149.95
3 only Bosch 12V "Max" 2-Speed Drill/Driver Kit • Reg. $229.95
$169.95
3 only Bosch 12V "Max" Impact Drill Kit • Reg. $279.95
$199.95
3 only Bosch 12V "Max Multi-X Carpenter" Multi Tool Kit • Reg. $359.95 $259.95
2 only Bosch 4 Pcs 12 Volt "Max" Combo Kit • Reg. $549.95
$449.95
3 only Bosch 14.4 Volt Lithium Cordless Drill Kit
(2-Batteries and Charger) • Reg. $259.95
$219.95
3 only Bosch 18 Volt Lithium Cordless Drill Kit
(2-Batteries and Charger) • Reg. $269.95
$229.95
4 only Bosch 18 Volt Lithium Drill/Impact
Combo Kit (Has 3-Batteries and 30 Min. Charger) • Reg. $479.95
$339.95
3 only Bosch 18 Volt Circular Saw
(One Battery/No Charger) • Reg. $219.95
$160.00
3 only Bosch 18 Volt Recipricating Saw
(One Battery/No Charger) • Reg. $219.95
$160.00
4 only Bosch 1/4 Sheet Palm Sander w/Case • Reg. $94.95
$79.95
5 only Bosch 5" Random Orbit Sander w/Hook/Loop Pad • Reg. $99.95 $89.95
3 only Bosch 5" V.S. Random Orbit Sander
w/Hook/Loop Pad • Reg. $139.95
$109.95
2 only Bosch 6" V.S. Orbital Sander • Reg. $329.95
$279.95
2 only Bosch 15 Gauge 2 1/2" Angled Finnish Nailer • Reg. $319.95
$269.95
4 only Bosch 2 1/2" 16 Gauge Finish Nailer • Reg. $299.95
$229.95
3 only Bosch 3 1/4" Clipped Head Framing Nailer • Reg. $469.95
$359.95
2 only Bosch Roofing Coil Nailer • Reg. $469.95
$389.95
9
www.canadianwoodworker.com
3 only P.C. 1 1/2 hp 1/2" Router • Reg. $219.95 6 only P.C. 2 1/4hp Vs Router Kit (Comes with
Plunge Base, Fixed Base, Height Wrench and Case • Reg. $399.95 3 only P.C. 3 1/4hp 5 Speed Fixed Base Router • Reg. $499.95 2 only P.C. 3 1/4 hp 5 Speed Production Plunge Router • Reg. $559.95 P.C. Universal 2-Sided Feather Board • Reg. $9.95 4 only P.C. 12" Deluxe Dovetail Jig (Half Blind
and Through Dovetails) • Reg. $249.95 5 only P.C. Deluxe Hinge Routing Kit
(Up To 9' Doors and 3-4 Hinges) • Reg. $429.95 2 only P.C. Passage Lock Boring Jig Kit • Reg. $399.95 General Woodworking Machinery
$179.95
$319.95
$419.95
$449.95
$5.00
$199.95
$329.95
$299.95
4 only General 1 hp 600 Cfm Dust Collector Door Crasher) • Reg. $349.95 $
249.95
4 only General 1 1/2hp 1200 Cfm Dust Collector • Reg. $499.95 $419.95
3 only General 1 1/2hp Dust Collector w/Canister Filter • Reg. $699.95 $559.95
2 only General 2 hp Dust Collector w/Canister Filter • Reg. $849.95 $779.95
4 only General 800Cfm Hanging Air Cleaner • Reg. $449.95 $359.95
4 only General 1300 Cfm 3- Speed Hanging Air Cleaner • Reg. $569.95 $419.95
1 only General 2 Stage Dust Collector 3hp w/Canister Filter • Reg. $3,449.95 $2,399.95
2 only General 6" X 89" Edge Sander • Reg. $999.95 $849.95
1 only General 24" Single Drum Sander • Reg. $1,779.95 $1,399.95
2 only General 24" Double Drum Sander • Reg. $2,499.95 $1,995.00
3 only General Oscillating Spindle Sander • Reg. $499.95 $399.95
4 only General 12" Vari-Speed Maxi Lathe • Reg. $799.95 $599.95
2 only General 14" X 30" V.S. Wood Lathe • Reg. $1,999.95 $1,779.95
2 only General 16" X 42" V.S. Wood Lathe • Reg. $2,259.95 $1,950.00
2 only General 15" 3 hp Planer • Reg. $1,799.95 $1,499.95
2 only General 15" Helical Planer 3hp • Reg. $2,999.95 $2,299.95
2 only General 20" Helical 5 hp Planer • Reg. $4,659.95 $3,750.00
1 only General 20" Helical Planer 7.5 hp • Reg. $6,499.95 $5,899.95
2 only General 3/4" Spindle Wood Shaper 3 hp • Reg. $1,629.95 $1,349.95
3 only General 10" Left Tilt Contractor Saw w/28"
T-Square Fence • Reg. $1,099.95 $969.95
4 only New General 1 3/4 hp "Granite Top" Cabinet Saw
w/30" Fence • Reg. $1,659.95 $1,124.95
2 only General 10" 3 hp Cabinet Saw w/50" Cut
(Table Board and Legs Incl) • Reg. $2,499.95 $1,899.95
2 only General 10" 3 hp Cabinet Saw
“Canadian Made” w/50" Cut
(Comes with Riving Knife) • Reg. $3,799.95 $2,795.00
1 only General 10" Sliding Table Scoring Saw 3hp 1Ph
(c/w 50-565 Outrigger Table) • Reg. $5,799.95 $5,250.00
3 only General Tilt Head Bench Top Mortiser • Reg. $629.95 $559.95
4 only General 14" Bench Drill Press • Reg. $329.95 $299.95
4 only General 14" Floor Model Drill Press • Reg. $389.95 $329.95
10
4 only General 17" Floor Model Drill Press • Reg. $649.95 2 only General 22" Floor Model Drill Press • Reg. $1,149.95 1 only General 13 Spindle Line Boring Machine
c/w Stand • Reg. $1,699.95 4 only General 6" Jointer (Open Stand) • Reg. $799.95 5 only General 6" Deluxe Long Bed Jointer • Reg. $949.95 2 only General 8" Helical Head Jointer • Reg. $2,699.95 3 only General 14" Bandsaw 2-Speed 1 hp • Reg. $999.95 2 only General Workbench w/2 Vises and Steel Legs
(60" X 30" Oak Top) • Reg. $899.95 6 only General Tenoning Jig • Reg. $159.95 4 only General 7" Woodworkers Vise • Reg. $119.95 24 only General Mobile Machinery Base • Reg. $79.95 All
Oneway Woodturning
Tools
Excalibur
$479.95
$979.95
$1,525.00
$579.95
$679.95
$2,249.95
$729.95
$749.95
$119.95
$109.95
Oneway $60.00
Woodturning
Chucks and
Accessories Are
10% Off
2 only Excalibur 21" Scroll Saw c/w Stand • Reg. $799.95 2 only Excalibur 30" Scroll Saw c/w Stand • Reg. $1,199.95 $749.95
$949.95
4 only Excalibur Blade Guard System (with 4" Dust Port) • Reg. $429.95 $350.00
3 only Excalibur 49" Sliding Table Attachment • Reg. $1,199.95 $675.00
2 only Excaliber Deluxe 60" Sliding Table Attachment • Reg. $1,599.95 $
1,295.00
4 only Excalibur Deluxe Band Saw Fence • Reg. $199.95 $159.95
10 only Excalibur Precision Miter Guide (Fits Most Table Saws) • Reg. $149.95 $99.95
Magswitch
Magswitch Magnetic Pro Featherboard Combo
(Comes with Vertical Attachment) • Reg. $82.95 Magswitch Magnetic 2-Side Featherboard • Reg. $54.95 $59.00
$45.00
Magswitch Magnetic Resaw Bandsaw Fence Kit • Reg. $159.95 $125.00
Magswitch Dual Roller Magnetic Fence Kit • Reg. $159.95 $130.00
Magswitch Deluxe Resaw/Dual Roller Fence Kit • Reg. $199.95 $160.00
Magswitch 20mm Mag-Jig Make Your Own Magnetic Shop Jigs) • Reg. $31.95 $27.00
Magswitch 30mm Mag-Jig (Get 2 For $65.00) • Reg. $39.95 $35.00
Pfiel Carving
Tools
All Pfiel
(Swiss Made)
Carving Tools All Razertip
Razertip
Are
Burners and
Woodburning Tools
15% Off
Hand Pieces
Are
10% Off
Trend
5 only Airshield/Pro Trend Airshield Pro
Face Shield (Breath Clean Air and Stay Cool)
8 Hour Run Time • Reg. $499.95 Trend Airshieldpro Ear Protect • Reg. $65.00 3 only Trend Powered Face Shield
(Breath Clean Air and Stay Cool) 4 Hour Run Time • Reg. $399.95 Trend Router Jig To Cut Kitchen Countertop • Reg. $223.75 Trend Router Bit Storage Tray • Reg. $29.95 Trend Hinge Jig • Reg. $319.95 Trend Door Holder Clamp • Reg. $23.95 Trend Door Holder Stand • Reg. $73.75 Lock/Jig Trend Mortise Lock Routing Jig • Reg. $223.75 Trend 16" Dovetail Jig (Does Half Blind, Through,
and Variable Space Dovetails) Made By Akeeda • Reg. $398.95 Trend Credit Card Size Diamond Sharpening Stone • Reg. $48.75 Trend Diamond Sharpening Steel 10"
(Great Tool In The Kitchen) • Reg. $81.24 Trend Ultimate Diamond Sharpening Kit
(Can Sharpen Carbide and Hss Tools) • Reg. $293.75 Trend Diamond Penfile • Reg. $73.75 Trend Deluxe Push Stick • Reg. $12.95 Trend Router Jig To Cut Staircase Stringers • Reg. $369.95 Trend 3/4 hp V.S. Plunge Router • Reg. $161.26 Trend Shelf Boring Jig (Drill Shelf Pin Holes
On 32mm Centers) • Reg. $99.95 Titebond Glues
24 only Titebond Iii Wood Glue Gallon • Reg. $53.95 Titebond Iii Wood Glue 32 Oz. • Reg. $18.95 Titebond Iii Wood Glue 16 Oz. • Reg. $12.95 24 only Titebond Ii Gallon • Reg. $31.95 Titebond Ii Glue (5 Gallon Pail) • Reg. $149.95 Titebond Glue 16Oz. • Reg. $7.95 Titebond Glue 32Oz. • Reg. $11.95 15 only Titebond Glue Gal. • Reg. $24.95 Titebond Melamine Glue 16 Oz. • Reg. $9.95 Titebond Hide Glue 8Oz • Reg. $8.95 Titebond Molding Glue 16Oz. • Reg. $10.95 Titebond Proffesional Assembly Glue (5 Gallon Pail) • Reg. $83.95 $395.00
$50.00
$295.00
$175.00
$20.00
$250.00
$20.00
$55.00
$175.00
$225.00
$29.00
$45.00
$195.00
$45.00
$9.00
$319.95
$129.95
$89.00
Tormek
New Tormek T3 8" Power Sharpening Center
$399.95
(Rain Check Only...Coming Early October) • Reg. $469.95 2 only Tormek T7 10" Basic Power Sharpening Center • Reg. $707.99 $689.95
2 only Tormek T7 "Hand Tools" Sharpening Package • Reg. $849.99 $799.95
2 only Tormek T7 "Woodturners" Sharpening Package • Reg. $915.99 $879.95
2 only Tormek T7 “Ultimate” Sharpening Package • Reg. $1,345.99 $1,299.95
Viking Bandsaw Blades
All Viking Band 59 1/2" • Reg. $17.95 All Viking Band 63 1/2" • Reg. $17.95 All Viking Band 70 1/2" • Reg. $- All Viking Band 72 • Reg. $17.95 All Viking Band 82 • Reg. $19.95 All Viking Band 93 1/2" All Sizes From 3/16" - 3/4" Width • Reg. $23.95 All Viking Band 97 1/2" • Reg. $23.95 All Viking Band 98 1/2" • Reg. $27.95 All Viking Band 99 1/2" • Reg. $32.95 All Viking Band 105" • Reg. $25.95 All Viking Band 111" • Reg. $27.95 All Viking Band 125" • Reg. $-
All Viking Band 131 1/2" • Reg. $37.95 All Viking Band 146" • Reg. $-
All Viking Band 150" • Reg. $44.95 All Viking Band 153" • Reg. $39.95 Wixey
Wixey Digital Fraction Caliper • Reg. $49.95 Wixey Digital Height Gauge • Reg. $79.95 Wixey Digital Angle Gauge • Reg. $49.95 Wixey Digital Protractor • Reg. $79.95 Wixey Digital Planer Readout • Reg. $79.95 Wixey Remote Digital Readout For Router Tables • Reg. $99.95 Wixey Digital Fence Readout • Reg. $169.95 Wixey Digital Planer Package • Reg. $129.95 Wixey Digital Table Saw Package • Reg. $349.95 Wixey Work Shop Digital Package • Reg. $499.95 Wixey Ultimate Digital Package • Reg. $599.95 $13.95
$14.95
$14.95
$14.95
$16.95
$18.95
$19.95
$19.95
$19.95
$19.95
$22.95
$25.95
$28.95
$34.95
$37.95
$34.95
$35.00
$51.00
$35.00
$51.00
$50.00
$60.00
$95.00
$80.00
$200.00
$300.00
$355.00
Woodpeckers
$30.00
$13.50
$8.95
$24.00
$119.95
$5.50
$8.50
$18.00
$6.95
$6.50
$6.95
$69.95
4 only Woodpecker Ultimate Drill Press Table
(c/w 2-Flip Stps and 2- Hold Down Clamps) • Reg. $229.95 Woodpecker Plunge Router Lift (Fits Hitachi M12v) • Reg. $269.95 6 only Woodpecker Prl-V2 Ultimate Router Lift • Reg. $429.95 Woodpecker 12" Precision Aluminum Square • Reg. $129.95 Woodpecker 48" Straight Edge Engraved Ruler • Reg. $139.95 Woodpecker 12" Carpenters Square • Reg. $129.95 Woodpecker 12" T-Square Ruler • Reg. $129.95 $149.95
$195.00
$329.95
$95.00
$95.00
$95.00
$95.00
11
New Industrial
M
y name is Cole Moore and I
am the president of Canadian
Woodworker. I am based out of
our head office in Winnipeg, along
with my sister Erin Taylor. Our
company was founded on our fathers
love for woodworking, and drive
as an industrial representative serving his customers in the
educational and manufacturing sectors of Manitoba. I am
thrilled that with the help of some great new people we are
more able than ever to service the woodworking industry in
Manitoba, Saskatchewan, and Alberta.
manitoba
www.canadianwoodworker.com
Educational Division
@ Canadian Woodworker
We are absolutely delighted that a gentleman by the name
of Wayne Maron, based in Edmonton, has joined our
team and will oversee, not only all four of our stores, but
will head up our new Industrial/Educational division.
Wayne has over 20 years experience serving our industry
3M Canada Coated Abrasives (Discs, Belts, Sheets)
Adjustable Clamp Woodworking Clamps
Axiom Industries Power Feeder and Edgebander Wheels
Wixey Development Digital Measuring Tools
Beaver Tools Inc. Pneumatic Trimmers and Routers
Bench Dog Tools Industrial Router Tables
Black & Decker Dewalt, Delta, and Porter-Cable
Byrd Tool Corp Custom Helical Carbide Cutter Heads
Clapham's Beeswax Furniture Salad Bowl/Breadboard polish
CMT USA, Inc. Router Bits, Saw Blades and Boring Bits
Cooper Power Tools "Master Power" Pneumatic Hand Tools
Denray Machine Inc. Down Draft Sanding Tables
Eezer Products Inc. Orbital Sander Backing Pads Franklin Int.
Fein ToolsMulti-Master power tools
Forest City Tool Drilling Tools and Chisels
General International Woodworking Machinery
Grex Tools Pneumatic Nailers and Staplers
Jessem Tool Router Tables and Sliding Tables
Klingspor Inc. Coated Abrasives
12
in Western Canada and we welcome all of his old
customers to look him up in his new role with us. Over the
last couple of months Wayne has been assembling his team.
You will meet them all here in this flyer, as well as when
they come calling at your door. These gentlemen are all
well experienced, seasoned, professionals we know will
be a great help to you and your classroom or business.
In addition to the many great lines of tools and supplies
we already have for woodworkers in western Canada,
we are pleased to have acquired some new product lines
which will better round out our services. I have included
a supplier list to show the companies we are now
representing.
We look forward to being able to work with you
industrial/educational requirements in the near future.
Cole Moore
Laguna Tools Woodworking Machinery
Magswitch Inc. Magnetic Hold Downs and Jig
Mirka Abrasives Coated Abrasives
Panasonic Tools Industrial Cordless Power Tools
Process Engineering Graphite Backing Materials
R & R Clamp Co Specialty Stacking Clamp Systems
Rikon Tools Machinery
Robert Bosch Power Tools
Royce-Ayr Tools Industrial Quality Router Bits
Safety Speed Cut Edgebanders, Vertical Panel Saws
Samona Int. Dust Collection, Hand Tools
SawStop Table saws and safety equipment
"Titebond" Wood Glues
Trend Technology Diamond Sharpeners, Respirators
Whiteside Machine Industrial Quality Router Bits
Powermatic Woodworking Machinery
Woodpeckers, Inc. Measuring Tools and Router Lifts
Woodstock Int. Dust Collection, Hand Tools
Woodworker's Haven "Viking" Bandsaw Blades
ROD
WAYNE
n. Saskatchewan
Edmonton
My name is Wayne Maron and I am
responsible for overseeing the operations
of our four stores as well as manage our
sales force for Industrial/Educational sales in
Alberta, Saskatchewan and Manitoba. I am
pleased to bring to Canadian Woodworker
my twenty years of woodworking industry
related experience which has spanned western
Canada. These are very exciting times as we take well established stores
in Winnipeg and Calgary, and now add Edmonton and Saskatoon. Through
the strength of a company that has been in business since 1967 and my
new sales team, we have a vast amount of knowledge to help you with your
woodworking needs. Please contact me or our representative in your area
with any questions or information you may need. I look forward to working
with all of you in my new roll and hope to see many of my past and future
customers in the coming months.
Let me introduce myself, I am Rod
Markewich, one of two Industrial/Educational
Account Managers for Canadian Woodworker
in Saskatchewan. Having 18 years experience
in industrial tool sales spanning three cities in
Western Canada I have come to appreciate
the hard work it takes everyday for you to get
the job done. That is why I chose Canadian
Woodworker, and I look forward to travelling the province assisting woodworkers
finding solutions to meet their woodworking needs. Through our great showroom,
extensive product selection and knowledgeable staff, I know we have what it
takes to find you the right tool for the job, every time. We are excited about the
opening of our latest location in Saskatoon at 805 Circle Drive and are ready to
provide you with great quality products and great service. Stop in and check us
out, from machinery and accessories to fine carving chisels and everything in
between, we have what you need to complete any woodworking project.
Phone 780-702-3000 • Fax 780-702-0373 • Toll Free 1-877-711-3001
Phone 306-979-4000 • Fax 306-979-4904 • Toll Free 877-979-4990
My name is Daniel Messett. I have been involved in the construction industry for over 30 years in both the commercial and residential
sectors. After my carpentry apprenticeship at S.A.I.T. Polytechnic in Calgary, and acquiring a diploma in adult education, I became head
instructor for the Southern Interior Construction Association in British Columbia. I eventually moved into management of various new
home construction companies, one of which was a recipient of the Alberta Award of Excellence in Housing Design and Innovator of the
Year from C.M.H.C. In my new role as team leader and account manger of our Calgary operation I look forward to meeting many of you
as I travel around to the schools and cabinet shops in and around Calgary. Our company Canadian Woodworker has a fantastic range of
products and I look forward to helping you choose the tools the best suit your needs.
Phone 403-255-8743 • Fax 403-255-8753 • Toll Free 877-255-8743
DANIEL
calgary
Mick
s. Saskatchewan
My name is Mick West, I have lived in
Saskatchewan all my life, except for attending
school for four years in Toronto. I worked for
25 years in commercial industrial photography,
everything from Potash mines to Medical.
I then spent nine years in the heavy steel
fabrication industry before joining a former tool
house as an industrial account manager for the
last five years. Throughout my time I have been an avid woodworker spending
every spare minute in my 800 square foot shop. Over many years I have come
to know the many shop teachers, cabinet shop and construction owners in
southern Saskatchewan. I have always been able to solve any problems and
be able to recommend and source the proper tools for my customers.
I look forward to seeing my past customers and always enjoy making new
ones. I will be based out of Regina and can be contacted on my cell phone
anytime. If I have not as yet met you,
I look forward to doing so.
Phone 306-979-4000 • Fax 306-979-4904
Toll Free 877-979-4990• Cell 306-531-9449
Claudio
calgary
Hi, my name is Claudio Gorsedin. I
have 22 years experience selling industrial
power tools in Calgary and am very pleased
to be able to share my experience with
the customers of Canadian Woodworker.
I promise to bring my hard work ethic,
professionalism, and knowledge to my
new customers as well as invite my past
customers to come down and visit me in my new roll. Store manager
Wayne Maron has asked me to be the in store contact person for
all of our educational and industrial customers, and I look forward
to be of service. We have many new product lines on the shelves in
addition to our outstanding line up of tool brands to assist you on all
your woodworking needs.
Phone 403-255-8743• Fax 403-255-8753
Toll Free 1-877-255-8743
13
LAGUNA TOOLS
NOW at Canadian Woodworker
Laguna 3mm Gluepot Edgebander 1 Phase • Reg. $18,995.00 $17,995.00
www.canadianwoodworker.com
The Laguna Bandit 2/3 sets the new standard for compact edgebanders. It provides
rapid, reliable production with a smaller footprint than full-sized edgebanders. Great
for the small shop it has single phase power, 3mm PVC and strip capacity, and built
in castors for mobility.This machine uses the same heavy-duty internal components
found in our larger, full-function edgebanders for maximum reliability. The microadjustable gluepot allows for precision control of glue application while the automatic
end and edgetrimming units trim all four sides in a single pass. This is the perfect
machine to increase your production and profits.
Laguna 8mm Gluepot Edgebander 3 Phase • Reg. $37,995.00 $34,995.00
The NEW Laguna Bandit 4/8 is the new heavyweight in their line of automatic
edgebanders. This machine has the capacity to handle up to 8mm edgebanding as
well as individual laminate strips. The gluepot allows for maximum flexibility for use
with PVC, wood tape, laminate and wood strips. Standard features include automatic
end trim with dual blade end cutting units, edge trimming with dual high frequency
motors, scraping unit, buffing unit, adjustable overhead control panel, pull out support
rollers for wide panels, and electronic temperature control with digital readout.
Laguna 10' Panelsaw 7.5 hp 3 Phase • Reg. $14,995.00 $13,995.00
The C45 Panel Saw features a massive 10.5 foot anodized precision sliding table.
The ergonomic design of this saw includes tilted control panel and tilted scales on
the cross cut fence for ease of use. The 7.5 HP Baldor main motor provides plenty
of power for the toughest of jobs and is equipped with automatic star-delta start.
The scoring unit features a separate motor and external controls for quick set up.
Standard features include micro-adjustable rip fence, parallelogram blade guard,
mitering crosscut fence, and motorized raising and lowering of the main blade.
14
Laguna 2 hp Portable Cyclone Dust Collector
w/Remote Start • Reg.$2,195.00 $1,995.00
Laguna 3hp Portable Cyclone Dust Collector
w/Remote Start • Reg. $2,495.00 $2,395.00
The Laguna Mobile Cyclone Dust Collectors with remote start/stop offer the benefits of a
cyclone and the portability needed for workshops of all sizes. The cyclone collection unit
allows the wood particles and dust to be separated from the air stream before going to the
pleated cartridge filter. This provides superior dust collection and air filtration so that the
wood particles do not pass through the efficient fan unit. Dust is collected in a 29 gallon
metal collection drum which features quick release and separate wheels for quick and easy
emptying. Motorized automatic filter cleaning insures that the pleated filter is always ready
for the next use of the machine and remains in top shape. The convenient remote control
included with this machine allows you to start the machine from anywhere in the shop
saving you time and steps. Industrial casters allow it to move easily around your shop. This
machine is also very quite, protecting your ears as well as your lungs.
Laguna 14" 3hp Deluxe Bandsaw • Reg. $1,899.95 $1,799.95
Laguna has used their 25 years of experience, knowledge and continuous innovation to
bring you this latest 14" bandsaw, the LT 14 SUV. Offering a full 14" of resaw capacity—
more than any other 14" bandsaw—and loaded with features such as the proven Laguna
Tools guides, 3 HP Leeson motor, rack and pinion controls, cast iron table, quick release
blade and foot brake with micro-switch for extra safety and convenience.
Laguna 16" 3 hp Deluxe Bandsaw • Reg. $2,295.00 $2,195.00
Laguna's award-winning LT16-3000 bandsaw just got better by incorporating features from
their Heavy-Duty series bandsaws. The long list of standard features now includes foot brake
with micro-switch, rack and pinion for the upper guidepost, geared trunions with gas spring,
quick tension release, and aluminum Laguna Guides. This new version features a 3 HP
Leeson motor for plenty of power when resawing. The cast iron trunions, table, and wheels
provide the stability needed to accurately slice wafer thin veneers from a tall block of hardwood. The award winning Laguna Guides insure positive control and tracking for your blades
while the dual 4" dust ports provide optimum dust control.
Laguna 18" 4 hp Deluxe Bandsaw • Reg. $2,595.00 Laguna 10' Panelsaw 5.5hp 1 Phase • Reg. $12,495.00 $11,995.00
The P32 Panel Saw features a massive 15" x 10.5' anodized precision sliding table. The
ergonomic design of this saw includes digital display for the tilting/angle scales and LED
RPM.The 5 HP single phase 220 volt main motor provides plenty of power for the toughest of jobs and is equipped with start/stop switches right on the end of the sliding table.
The scoring unit features a separate 3/4 hp motor and external controls for quick set up.
Standard features include micro-adjustable rip fence, deluxe blade guard, and mitering
crosscut fence.
Laguna Cnc 3 Axis Panel Saw 7.5 hp 3 Phase • Reg. $29,995.00 $28,995.00
Laguna 10' Digital Panelsaw 7.5hp 3 Phase • Reg. $14,995.00 $13,995.00
The P3200-TA Panel Saw features a massive 15" x 10.5 foot anodized precision sliding
table. The ergonomic design of this saw includes digital readouts for RPM and blade angles,
digital blade tilting adjustment, and motorized adjustment of both the main blade and scoring
blade. The 7.5 HP main motor provides plenty of power for the toughest of jobs and the
scoring unit features a 1 hp separate motor and external controls for quick set up. Standard
features include micro-adjustable rip fence, miter fence, parallelogram blade guard, and
crosscut table with digital stop.
Laguna 5' Sliding Panelsaw 4hp 1 Phase • Reg. $6,995.00 $6,495.00
Laguna 8' Sliding Panelsaw 4 hp 1 Phase • Reg. $9,495.00 $8,795.00
The all-new Laguna Pro-Series sliding panelsaws feature heavy-duty cast-iron
internal components for rock solid performance. The 14" wide precision sliding table
is anodized for durability and features a rugged support table and a telescoping
crosscut fence with dual flip-stops. The crosscut table sports a roller and is supported
by a large swing-arm and is ideal for sheet goods. On and off switches for the motor
are conveniently located in the handle of the siding table so you never have to reach
under the panel again. The standard 4 HP single phase motor provides plenty of
power for the toughest of jobs while the scoring blade is powered by a separate
motor. Our Euro-style slider, riving knife, and micro-adjustable rip fence system
provide safety and precision for flawless cuts every time. The 5' saw has a crosscut
capacity of 67" and the 8' will crosscut up to 106" panels.
$2,495.00
The LT18 3000 series is the new "Senior" member of Laguna's best selling 3000 series.
This new saw provides a perfect balance between very large capacities and price. With 16"
of resaw capacity and a maximum blade width of 1" it is powered by a 4HP TEFC motor and
will handle almost every job a typical custom woodworking shop will encounter. Some of the
features are a blade tension mechanism with quick release, foot brake with micro-switch
for convenience and safety, 2 dust ports, and a unique rack and pinion tilt system to tilt the
table which is counter balanced with a gas spring.
15
visit our brand new website
to get more information
on all of our tools…
SASKATOON
4 – 805 Circle Drive Saskatoon, SK S7K 3S4
T: 306-979-4000 • F: 306-979-4904 • TF: 877-979-4990
E-mail: Saskatoon@canadianwoodworker.com
EDMONTON
4920 99th Street N.W. Edmonton, AB T6E 3N6
T: 780-702-3000 • F: 780-702-0373 • TF: 877-711-3001
E-mail: Edmonton@canadianwoodworker.com
*
WINNIPEG
1054 Portage Avenue, Winnipeg MB R3G 0S3
T: 204-786-3196 • F: 204-783-6867 • TF: 800-665-2244
E-mail: Winnipeg@canadianwoodworker.com
CALGARY
105E – 58th Avenue SE, Calgary, AB T2H 0N8
T: 403-255-8743 • F: 403-255-8753 • TF: 877-255-8743
E-mail: Calgary@canadianwoodworker.com

Similar documents

year-end inventory clearance

year-end inventory clearance Bosch 3 1/4" Clipped Head Framing Nailer

More information

Canadian Woodworker.

Canadian Woodworker. Bench Dog Saw Blade Changing Tool For Table Saws • Reg. $19.95 Bench Dog Offset H.D. Push Stick • Reg. $28.95

More information

woodworking - Canadian Woodworker.

woodworking - Canadian Woodworker. September 26 – October 1 Dewalt Premium Compact Router c/w Plunge Base $259.95 • $189.95 Dewalt 12V Max Drill/Impact Combo Kit Lithium Ion $269.95 • $189.95 New Grex Deluxe 2" Brad Nailer This is t...

More information