Hardy Frame

Product Catalog
HARDY
™
FRAME
®
PRE-FABRICATED SHEAR WALL SYSTEMS
A M i Te k C o m p a n y
HARDY
™
FRAME
®
PRE-FABRICATED SHEAR WALL SYSTEMS
4-14
HARDY
Table of Contents
FRAME
™
®
Company
Profile...........................................................................................................................................
1
Product Listings.........................................................................................................................................2-4
General Information....................................................................................................................................... 5
Code Evaluations & Product Information......................................................................................................... 6
Notes to Specifier, Framer and General........................................................................................................... 7
Panels & Brace Frames
On Foundation.............................................................................................................................................. 8
Table 1.1A 2500,3000 and 4000 psi concrete......................................................................................9-21
On Wood Sill Plate....................................................................................................................................... 22
Table 1.2............................................................................................................................................23-25
On Raised Floor.......................................................................................................................................... 26
Table 1.2A..........................................................................................................................................27-29
On Upper Floor Systems.............................................................................................................................. 30
Table 1.3A..........................................................................................................................................31-33
HFX/S Panels and Brace Frames - Steel Stud Heights................................................................................... 34
Table 2.1A 2500, 3000 and 4000 psi concrete.....................................................................................35-38
Prescriptive Braced Walls....................................................................................................................... 39
Design Examples.................................................................................................................................40-41
Photos ...............................................................................................................................................42-43
Accessories
Post
................................................................................................................................................... 44
Saddle ................................................................................................................................................... 45
Template Kit Componets.............................................................................................................................. 46
Back to Back Templates, Anchor Bolt Assemblies, Base Extension.................................................................. 47
Stacking Washer, Bearing Plate, Deep Socket, Bolt Lever............................................................................... 48
Tension Connectors..................................................................................................................................... 49
Details
HFX 1Panels - Typical Anchorage Details..................................................................................................50-51
HFX 2Panels - Typical Framing Details.....................................................................................................52-53
HFX 3 Panels - Typical Floor System Details..............................................................................................54-55
HFX 4 Brace Frames - Typical Foundation Details......................................................................................56-57
HFX 5 Brace Frames - Typical Framing Details..........................................................................................58-59
HFX 6 Brace Frames - Typical Floor System Details...................................................................................60-61
Hardy Frame Moment Frame
Moment Frame Description.......................................................................................................................... 62
Moment Frame Installation in Retrofit Applications........................................................................................ 63
USP
Connector Capacity..................................................................................................................................... 64
USP Software Products................................................................................................................................ 65
Zone Four Continues Tie-Down Systems............................................................................................66-67
Research & Design.................................................................................................................................. 68
Hole Chart & Attachments..................................................................................................... inside back cover
HARDY
™
FRAME
Hardy Frames® Company Profile
®
H
ardy Frames manufactures and markets the revolutionary Hardy Frame® shear wall system, and has been the
leader in the pre-fabricated shear wall industry for over 15 years. The Hardy Frame® system allows Building
Design Professionals to economically and safely minimize wall space and maximize wall openings while resisting
high wind and earthquake loads.
The Hardy Frame® product line includes Panels, Brace Frames, Moment Frames, and various accessory items for
installation. The new Hardy Frame® HFX-Series presented in this catalog has been tested per the ICC-ES Acceptance
Criteria AC322, and has shown to provide excellent strength, excellent stiffness, and excellent ductility.
The original Hardy Frame® shear wall system was conceived and developed by Gary L. Hardy, a licensed General
Contractor with over 25 years of framing experience. His vision was to develop a strong and durable pre-fabricated shear
wall solution that is cost effective, simple to install, and easy to inspect in order to eliminate the problems and hidden
costs associated with site-built plywood shear walls.
From its inception the Hardy Frame® Shear Wall System has been the leading innovator in it's category. In fact, the Hardy
Frame® was the first to be recognized by ICBO-ES and LA City, the first to gain approval for multi-story applications,
the first Balloon Wall application, and the first to be recognized to comply with the 2003 and 2006 IBC and IRC Building
Codes. Our 9 inch Panel remains the narrowest prefabricated shear wall in the industry and we have now expanded our
product line to include 15 and 21 inch widths.
Hardy Frames is a wholly owned subsidiary of MiTek Industries, Inc., which is part of Warren Buffett’s Berkshire
Hathaway, Inc. By combining our talents with MiTek’s manufacturing, engineering, and software expertise, we have
amassed the resources to develop and offer the best products and services for our customers. The latest result of
these efforts is the development of the HFX-Series product line.
Our mission remains to provide you with the safest and most cost effective solutions to all of your shear and wall bracing
challenges. We strive to accomplish this by adopting a process of constant improvement – continuously seeking ways to
improve our operations, our products, and our services.
All of the Hardy Frame® products are conveniently available through local lumber yards and building hardware suppliers.
Please contact us today to discover how the Hardy Frame® shear wall system can provide you with the Best Value
solutions to your shear and wall bracing needs.
For more information, please call us at
800-754-3030 or visit our website at
www.hardyframe.com
1
HARDY
™
FRAME
Hardy Frame® Product Listing
®
HFX-Series
Model Number
Panel
9 in. thru 24 in. widths
Brace Frame
32 & 44 in. widths
HFX-9x79.5
HFX-12x78
* HFX-15x78
HFX-18x78
* HFX-21x78
HFX-24x78
HFX-9x8
HFX-12x8
* HFX-15x8
HFX-18x8
* HFX-21x8
HFX-24x8
HFX-32x8
HFX-44x8
HFX-12x9
HFX-15x9
*
HFX-18x9
* HFX-21x9
HFX-24x9
HFX-32x9
HFX-44x9
HFX-12x10
* HFX-15x10
HFX-18x10
* HFX-21x10
HFX-24x10
HFX-32x10
HFX-44x10
* HFX-15x11
HFX-18x11
* HFX-21x11
HFX-24x11
HFX-32x11
HFX-44x11
* HFX-15x12
HFX-18x12
* HFX-21x12
HFX-24x12
HFX-32x12
HFX-44x12
* HFX-15x13
HFX-18x13
* HFX-21x13
HFX-24x13
HFX-32x13
HFX-44x13
W (in)
H (in)
9
12
15
18
21
24
9
12
15
18
21
24
32
44
12
15
18
21
24
32
44
12
15
18
21
24
32
44
15
18
21
24
32
44
15
18
21
24
32
44
15
18
21
24
32
44
79-1/2
Depth (in)
Wt (lbs)
3-1/2
77
90
101
113
133
148
90
106
118
131
157
172
143
174
116
130
144
175
190
158
190
128
143
158
195
209
173
206
161
177
218
233
188
222
174
190
235
251
203
238
187
203
254
269
218
254
78
93-3/4
92-1/4
92-1/4
104-1/4
104-1/4
116-1/4
116-1/4
128-1/4
128-1/4
140-1/4
140-1/4
152-1/4
152-1/4
Minimum
Minimum Screw Holes
Screw Qty @ Screw Qty @ Available @
Top (ea)
Bottom (ea) Edges (ea)
* New Product
For HFX/S Panel and Brace Frame model numbers (built to steel stud height) see product catalog page 35
2
5
6
8
10
12
14
5
6
8
10
12
14
10
14
6
8
10
12
14
10
14
6
8
10
12
14
10
14
8
10
12
14
10
14
8
10
12
14
10
14
8
10
12
14
10
14
NA
6
8
10
12
14
NA
6
8
10
12
14
10
14
6
8
10
12
14
10
14
6
8
10
12
14
10
14
8
10
12
14
10
14
8
10
12
14
10
14
8
10
12
14
10
14
4
4
NA
4
NA
5
NA
5
NA
6
NA
6
NA
HARDY
™
FRAME
Hardy Frame® Product Listing
®
HFX-Series
Model Number
* HFX-15x14
*
*
*
*
*
*
*
*
*
*
Balloon Panel
*
15 in. thru 24 in widths
14 ft. thru 20 ft. heights
*
* New Product
*
HFX-18x14
HFX-21x14
HFX-24x14
HFX-15x15
HFX-18x15
HFX-21x15
HFX-24x15
HFX-15x16
HFX-18x16
HFX-21x16
HFX-24x16
HFX-15x17
HFX-18x17
HFX-21x17
HFX-24x17
HFX-15x18
HFX-18x18
HFX-21x18
HFX-24x18
HFX-15x19
HFX-18x19
HFX-21x19
HFX-24x19
HFX-15x20
HFX-18x20
HFX-21x20
HFX-24x20
HFP-Series
Model Number
W (in)
15
18
21
24
15
18
21
24
15
18
21
24
15
18
21
24
15
18
21
24
15
18
21
24
15
18
21
24
W (in)
HFP8-7/8
HFP9-7/8
HFP9-1 1/8
HFP10-7/8
HFP11-7/8
HFP11-1 1/8
HFP12-7/8
HFP12-1 1/8
Post
HFP13-7/8
HFP13-1 1/8
Wt (lbs)
3-1/2
223
250
271
299
240
267
291
320
257
284
311
340
274
301
331
361
291
318
352
382
308
335
373
402
325
352
394
422
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
8
10
12
14
Wt (lbs
Rod DA.
@ Top (in)
164-1/4
176-1/4
188-1/4
200-1/4
212-1/4
224-1/4
236-1/4
H (in)
Depth (in)
42
104-1/4"
47
116-1/4"
52
3-1/2"
3-1/2”
128-1/4"
Minimum
Minimum
Screw Qty @ Screw Qty @
Top (ea)
Bottom (ea)
Depth (in)
92-1/4"
HFP8-1 1/8
HFP10-1 1/8
H (in)
57
140-1/4"
62
152-1/4"
67
Screw Holes
Available @
Edges (ea)
6
NA
7
8
Rod DA.
Screw Holes
@ Bottom (in) @ Edges (ea)
7/8
7/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
7/8
7/8
1-1/8
1-1/8
NA
Ordering Information
1) For Panels, adding “STK” after the model number indicates HFX-Series Stacking Panels with built-in HFSW-Stacking Washers inside the top channel.
2) HFX/S models (not shown) are fabricated to standard steel stud heights of 96 5/8" 108 5/8" etc.
3) Custom heights are available for Panels, Brace Frames and Posts not to exceed the maximum height listed for that product.
4) Model number HFX-9x79.5, HFX-12x78, HFX-15x78, HFX-18x78, HFX-21x78 and HFX-24x78 Panels come with two straps welded to the solid face.
5) All models can be ordered custom with welded straps.
5) For Post, order with 1-1/8 Dia Rods when connecting to Panels, 7/8 Dia for Brace Frames.
Connector Information
1) Screws are 1/4-inch diameter USP-WS Series (ESR-2761) or equal with a minimum allowable design value of 418 lbs. (excluding any duration of load stress increase) based on connecting metal (No. 12 gage) to wood (specific gravity of 0.50 or greater).
2) Screws at top are 3-inches when attaching directly to the collector. When installing a 2x wood filler (specific gravity of 0.5 or greater) at the top connection, the minimum screw length is 4-1/2 inches.
3) Screws at bottom (when applies) are 4-1/2 inches at Panel and Brace Frame connections, 3-inches (minimum) at Hardy Frame® Bearing Plate.
4) 1/4” diameter edge screws are required when installing fillers above greater than 1-1/2" or when specified by the Building Design Professional.
3
HARDY
™
FRAME
Hardy Frame® Accessories
®
Templates
Bolt Braces
Washers & Bearing Plates
HFXT
Wt
(lbs)
Back to Back
HFXDT
Wt
(lbs)
HFXBB
Wt
(lbs)
*Back to Back
HFXDBB
Wt
(lbs)
Stacking
& Plate
Washers
Wt
(lbs)
Bearing Plates
Wt
(lbs)
HFXT9
0.7
HFXDT9
2.0
HFXBB-9
0.3
HFXDBB9
0.3
HFSW12
1.5
HFXBP12
(Length = 18")
13
HFXT12
0.9
HFXDT12
2.2
HFXBB12
0.4
HFXDBB12
0.4
HFSW15-24
2.8
*HFXBP15
(Length = 21")
15
*HFXT15
1.2
*HFXDT15
2.5
*HFXBB15
0.5
HFXDBB15
0.5
HFPW 7/8
1
HFXBP18
(Length = 24")
17
HFXT18
1.4
HFXDT18
2.8
HFXBB18
0.6
HFXDBB18
0.6
HFPW 1-1/8
1
*HFXT21
1.7
*HFXDT21
3.3
*HFXBB21
0.7
HFXDBB21
0.7
HFXT24
1.9
HFXDT24
3.8
HFXBB24
0.8
HFXDBB24
0.8
HFXT32
3.2
HFXDT32
5.1
HFXT44
4.2
HFXDT44
6.4
Template Kits
Wt
STD Rods1 (lbs)
Wt
(lbs)
HS Rods2
HFXTK9
20
HFXTK-HS9
26
HFXTK12
20
HFXTK-HS12
26
*HFXTK15
21
21
21
22
16
17
*HFXTK-HS15
*HFXTK-HS21
26
27
27
28
18
19
Bolt Lever
Wt
(lbs)
HFBL
21
HFXTK18
*HFXTK21
HFXTK24
HFXTK32
HFXTK44
HFXTK-HS18
HFXTK-HS24
HFXTK-HS32
HFXTK-HS44
Base
Wt
Extension (lbs)
HFBX
*HFBX46-L
*HFBX46-R
*HFBX66-L
*HFBX66-R
2
2.5
2.5
3
3
Wt
STD Rods1 (lbs)
HFTC-7/8 STD
9
HFTC12 STD 15
HFTC15-24 STD 20
Saddles
Wt
(lbs)
HFS24
HFS36
3
4
Notes
*Anchor Bolt Assemblies
Tension Connector Kits
HS Rods2
Wt
(lbs)
Panels
Wt
(lbs)
HFTC-7/8 HS
9
HFAB1-1/8x36STD 10.5
HFTC12 HS
HFTC15-24 HS
18
21
HFAB1-1/8x48STD 13.5
HFAB1-1/8x60STD
HFAB1-1/8x72STD
HFAB1-1/8x36HS
HFAB1-1/8x48HS
HFAB1-1/8x60HS
HFAB1-1/8x72HS
16.3
18.9
10.8
13.5
16.4
19.3
*HFXBP21
(Length = 27")
HFXBP24
(Length = 30")
HFXDT
HFXBB
HFXDBB
HFBX
HFBX6
4
ANCHOR BOLT
ASSEMBLY
TENSION CONNECTOR KIT
FOR PANELS
HFSW
HFPW
21
1) STD Anchor Bolts
must comply with
Wt ASTM F1554
Brace Frames (lbs)
Grade 36.
2) HS Anchor Bolts
HFAB7/8x36STD 6.6
must comply with a
HFAB7/8x48STD 8.2 high strength steel
HFAB7/8x60STD 9.8 specification,
HFAB7/8x72STD 11.4 High Strength bolts
HFAB7/8x36HS 7.2 include but are not
HFAB7/8x48HS 9.1 limited to ASTM
F1554 Grade 105,
HFAB7/8x60HS 11
ASTM A193 Grade
HFAB7/8x72HS 12.9
B7 and ASTM A354
Grade BD.
* New Product
HFXT
19
HFR
HFXBP
HARDY
™
FRAME
General Information
®
General Information
The Hardy Frame® HFX-Series Panels and Brace Frames combine the most desirable properties for a shear wall: strength, stiffness, and ductility.
This revolutionary system has been tested and evaluated under the ICC-Evaluation Service AC322 Acceptance Criteria, and has been proven to
provide the highest allowable shear loads in the industry combined with abundant ductility for a seismic “R” value of 6.5. Along with its superior
engineering properties, the HFX-Series is easier than ever to install, is code listed for varied installations including on floor systems and stacking
conditions with practical anchorage solutions for standard as well as high strength hold down rods.
New features presented in this catalog include:
• New 15 and 21 inch Panel widths.
• Allowable values for installations on 2500, 3000, and 4000 psi concrete have been combined in one table.
• The allowable design values in this catalog have been increased in accordance with the 2012 IBC Code.
• Typical installation details have been revised.
• Includes reinforced anchorage solutions for single and back-to-back Panel installations.
• New accessories including templates for 2x6 wall framing and back-to-back installations.
• New anchor bolt assemblies for threaded rod lengths of 3, 4, 5, and 6 foot.
• Tables have been resequenced by height.
• Examples of plan specifications are now shown at the end of each section.
Hardy Frame® HFX-Series Panels are available in widths of 9, 12, 15,18, 21 and 24-inches and in heights that correspond to a standard portal
(78-inches) and standard wood stud lengths. For slab or curb installations simply secure to the foundation with two 1-1/8-inch diameter hold down
anchors and connect the top channel to a collector above with 1/4-inch diameter screws through pre-punched holes. No connections are required
to the edges or to either face.
Hardy Frame® HFX-Series Brace Frames are either 32 or 44-inches wide and as with Panels, are fabricated to standard wood stud lengths. Hold
down anchors for Brace Frames are 7/8-inch diameter and may be either standard or high strength for increased allowable loads. Connections
to the foundation require two 7/8-inch diameter standard grade hold down anchors. Top connections are accomplished with 1/4-inch diameter
screws into the collector above. No other connections are required but field studs are provided for easy attachment of surface finishes with self
tapping screws.
5
HARDY
™
FRAME
Code Evaluations
®
Code Evaluations:
For the most current code report listings refer to our website www.hardyframe.com/codereports
Product Use:
The Hardy Frame® products are designed and manufactured for the specific purposes described in this catalog. Any changes to the products or in
the installation procedures must be approved by the Building Design Professional and are the sole responsibility of the designer.
Quality Statement:
Hardy Frames warrants to its customers that its products are free from material defects of manufacture or design, and will perform in substantial
accordance with published specifications, if properly used.
Testing:
Hardy Frames performs extensive testing on all of the Hardy Frame® structurally rated products. All final testing is conducted by a third party testing
laboratory.
Material:
Hardy Frame® Panels, Brace Frames and Posts are manufactured from prime quality steel which meets the requirements of ASTM A653 SS Grade
50 steel and ASTM A36 hot-rolled steel built in at hold down connections.
Finish:
All galvanized steel have a minimum G60 hot-dipped galvanized zinc coating.
Threaded Rod/Hold Down Bolts
Unless noted otherwise the “STD” hold downs are ASTM F1554 grade 36, and the “HS” (high strength) are ASTM A193 grade B7 or equivalent.
6
HARDY
™
FRAME
Notes
®
Notes to the Specifier:
CUSTOMER SERVICE
• The allowable loads shown in this catalog are based on Allowable Stress Design (ASD)
methodology.
• The published allowable design loads for the Hardy Frame® Panels and Brace Frames are
based on calculations and testing.
• For the Hardy Frame® Panels and Brace Frames, the allowable design loads may change
depending on the type of support below. Please be sure to refer to the proper table and
installation details for accurate load values and proper installation.
• Please be clear as to the surface you want the Hardy Frame® Panel or Brace Frame to be
installed on i.e.: on concrete, mudsill, etc.
• For a combination of over-turning and gravity loads the specifier must review and check the bearing pressure on the structure below.
• The allowable design values for the Hardy Frame® Panels and Brace Frames shown in these
tables are for the 2012 IBC code. Notes to the Framer:
• Install all specified fasteners in accordance with the instructions of this catalog.
• When necessary, all field welding should be done in accordance with A.W.S. standards.
WARNING: Welding galvanized steel may produce harmful fumes and should be performed in
well-ventilated environments. Follow proper welding procedures and safety precautions.
• Washers are required under the head or nut of all bolted connections.
• Please refer to the proper installation specifications and details as provided in the plans.
General Notes:
• Hardy Frames reserves the right to change specifications, designs, and models without notice
and liability of such changes.
At Hardy Frames premanufactured shear
walls are our core business. From the
beginning, customer service has been
a top priority. Because we are focused
on shear walls and have a strong
commitment to service, we can provide
you with the best support in the industry.
To the Design Professional this means
prompt and correct technical answers
and full design solutions that are backed
by extensive testing and research.
From providing allowable design loads
to addressing specific repairs you can
always count on our answers.
To the Building Official, our Code Reports
and Typical Installation Details will
make the plan check process and field
inspection easier.
To the Installer, our background and
knowledge in framing and construction
allows us to communicate with the
field and have an understanding of the
installation from the point of view of the
installer. Quick responses are a must and
project delays are avoided at all costs.
Help is available by telephone, or by one
of our many field representatives with
real field experience.
• The information presented in this catalog supercedes all information published in previous
documents and publications.
• This catalog is designed as a general reference for the Hardy
Frame®
products. For more
specific and most up to date information, please visit our website at hardyframe.com or
contact us directly at 800-754-3030.
• For installations involving unusual or extreme applications and conditions, please contact
Hardy Frames at 800-754-3030.
• This catalog may not be reproduced in whole or in part without the written permission of
Hardy Frames.
To all parties, in addition to literature,
details and telephone support, our
company provides jobsite visits,
seminars, and personal training sessions.
We respond to our customers and you
can rest assured that we will be there for
you when you need us.
How can we help you today?
7
HARDY
™
FRAME
On Foundations
®
Hardy Frame® Panel
Hardy Frame® Panel
Hardy Frame® Panel
with 2x filler
at top plates
with 4x filler
1/4 x 4PANEL
1/2" screws
1/4 xPANEL
3" screws
HARDY FRAME
WITHHARDY
2X FILLER
FRAME
AT TOP PLATES 1/4 x 3" screws
®
Hardy Frame® Panel
at Portal
1/4 x 3" screws. 78 inch
HARDYPanel
FRAME
PANEL
AT PORTAL
heights
include
HARDY FRAME PANEL WITH
welded
straps
4X FILLER
®
®
®
®
®
HARDY FRAME PANEL
BOTTOM
® Panel
HARDY
FRAME
BOTTOM
Hardy Frame® Panel
Hardy
FramePANEL
ON CONCRETE
ON
DOUBLE
NUT
on concrete
on nuts and washers
Hardy Frame® Panel
at raised floor
head out
(Requires 5,000 psi
non-shrink grout)
•Installation on nuts and washers provides for leveling at uneven
HARDY
FRAME
concrete - open end box wrench may
be used
to PANEL
secureBOTTOM
connection
ON RAISED FLOOR ON CONCRETE
from below
•Raised floor head out by passes wood framing to eliminate the
effects of shrinkage and crushing, while providing a direct shear
transfer to the foundation
•Raised floor head out requires less material by eliminating the rim,
bearing plate and bottom screws
•The new HFX-Series Brace Frame has relocated hold down
“Back to Back”
installations
provide two times
bolts to be outside of the post. Hold down connections are now
the allowable shear value
accessible even when wood or framing is in contact with the
edge of the frame
•With proper detailing and anchorage “Back to Back” installations provide two times
the allowable shear value without increasing the wall width
®
Hardy Frame®
Brace Frame
HARDY FRAME BRACE FRAME
with
2x filler
TOP WITH
FILLER
1/4 x 4 1/2" screws
®
Hardy Frame®
Brace Frame
HARDY FRAME BRACE FRAME
at TOP
top PLATE
plates
TOP WITH
1/4 x 3" screws
®
Hardy Frame®
HARDYBrace
FRAME Frame
BRACE FRAME
4X FILLER
with 4x filler
1/4 x 3" screws
®
8
Hardy Frame®
Brace Frame
on concrete
®
HARDY FRAME BRACE FRAME
BOTTOM ON CONCRETE
Hardy Frame®
Brace Frame
on nuts and washers
(Requires 5,000 psi
non-shrink grout)
®
HARDY FRAME BRACE FRAME
BOTTOM ON DOUBLE NUT
Hardy Frame®
Brace Frame
at raised floor
head out
®
HARDY FRAME BRACE FRAME
BOTTOM ON RAISED FLOOR
HEAD OUT
HARDY
™
FRAME
Model
Number
HFX-9x79.5
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height
Compressive
H (in)
Strength f’c (psi)
79 1/2
2,500
3,000
4,000
Seismic
HD Bolt Dia (in) Applied Axial
Load 4
and Grade 3
1 1/8" STD
1 1/8" STD
2,500
1 1/8” HS
1 1/8” STD
HFX-12x78
78
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x78
78
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x78
78
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x78
78
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
2,000
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
905
1,100
1,350
1,750
1,610
1,440
1,750
1,610
1,440
2,000
1,970
1,810
2,110
1,970
1,810
Wind
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.186
0.226
0.276
0.193
0.178
0.159
0.194
0.179
0.160
0.221
0.218
0.200
0.234
0.219
0.201
15,510
19,220
21,435
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
905
1,100
1,350
1,750
1,610
1,440
1,750
1,610
1,440
2,000
1,970
1,810
2,110
1,970
1,810
0.186
0.226
0.276
0.193
0.178
0.159
0.194
0.179
0.160
0.221
0.218
0.200
0.234
0.219
0.201
15,510
19,220
21,435
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
2,210
0.245
21,620
2,210
0.244
21,620
2,830
2,695
2,530
2,425
2,405
2,350
2,855
2,675
2,425
0.314
0.299
0.281
0.252
0.251
0.245
0.298
0.279
0.252
32,065
29,275
26,380
21,615
21,380
20,560
31,340
26,150
21,625
2,830
2,695
2,530
2,425
2,405
2,350
2,855
2,675
2,425
0.314
0.299
0.281
0.251
0.250
0.244
0.298
0.279
0.252
32,065
29,275
26,380
21,615
21,380
20,560
31,340
26,150
21,625
2,590
0.270
21,620
2,590
0.269
21,620
3,275
3,265
3,020
2,800
2,795
2,785
0.341
0.340
0.315
0.292
0.291
0.290
32,885
32,600
27,795
21,620
21,590
21,445
3,440
3,265
3,020
2,800
2,795
2,785
0.358
0.340
0.315
0.290
0.290
0.289
38,195
32,600
27,795
21,620
21,590
21,445
3,275
0.341
26,695
4,160
0.433
39,380
3,050
0.185
19,725
3,195
0.193
21,055
4,425
4,195
3,885
0.269
0.255
0.236
39,500
33,700
28,745
4,425
4,195
3,885
0.269
0.255
0.236
39,500
33,700
28,745
3,050
0.185
18,635
3,305
0.200
20,645
4,660
0.283
34,455
4,660
0.283
34,455
3,050
0.185
17,585
3,450
0.209
20,335
4,660
0.283
29,645
4,660
0.283
29,645
3,805
0.198
19,685
3,805
0.198
19,685
6,005
6,005
5,690
0.315
0.315
0.299
40,495
40,495
36,045
6,230
6,040
5,690
0.327
0.317
0.299
44,825
41,070
36,045
3,925
0.204
19,585
3,925
0.204
19,585
6,005
0.315
34,645
6,875
6,800
6,680
0.361
0.357
0.351
43,835
42,865
41,480
4,075
0.212
19,460
4,075
0.212
19,460
6,005
0.315
30,985
7,295
0.383
40,220
9
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height
Compressive
H (in)
Strength f’c (psi)
Seismic
HD Bolt Dia (in) Applied Axial
Load4
and Grade3
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x78
78
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
HFX-9x8
93 3/4
2,500
3,000
4,000
1 1/8” STD
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-12x8
92 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x8
92 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x8
92 1/4
3,000
1 1/8” HS
10
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
2,000
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
3,830
Wind
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
0.123
15,985
4,345
0.140
18,570
6,990
0.227
35,310
7,605
7,505
7,360
0.246
0.243
0.238
40,940
39,925
38,515
3,830
0.123
15,565
4,465
0.143
18,540
6,990
0.227
32,375
8,365
8,335
8,245
0.271
0.270
0.267
42,200
41,940
41,225
3,830
0.123
15,095
4,620
0.148
18,540
6,990
0.227
29,900
8,490
0.275
38,125
770
935
1,040
1,480
1,365
1,220
1,480
1,365
1,220
1,690
1,665
1,530
1,780
1,665
1,530
0.258
0.314
0.349
0.223
0.206
0.184
0.225
0.207
0.185
0.255
0.252
0.231
0.271
0.253
0.232
15,510
19,220
18,235
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
770
935
1,145
1,480
1,365
1,220
1,480
1,365
1,220
1,690
1,665
1,530
1,780
1,665
1,530
0.258
0.314
0.384
0.224
0.206
0.184
0.224
0.207
0.185
0.256
0.252
0.231
0.271
0.253
0.232
15,510
19,220
21,435
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
1,870
0.282
21,615
1,870
0.283
21,615
2,145
0.326
26,505
2,140
2,050
2,035
1,990
2,415
2,260
2,050
0.325
0.311
0.309
0.301
0.366
0.343
0.311
26,380
21,620
21,380
20,560
31,340
26,150
21,625
2,390
2,275
2,140
2,050
2,035
1,990
2,415
2,260
2,050
0.363
0.346
0.325
0.309
0.307
0.300
0.366
0.343
0.311
32,065
29,275
26,380
21,620
21,380
20,560
31,340
26,150
21,625
2,190
0.332
21,620
2,190
0.331
21,620
2,660
0.404
30,075
2,555
0.388
27,795
2,910
2,760
2,555
0.441
0.419
0.388
38,195
32,600
27,795
2,370
0.359
21,620
2,370
0.357
21,620
2,660
0.404
25,250
3,380
0.512
36,500
2,695
0.224
20,985
2,750
0.228
21,615
3,740
3,550
3,285
0.312
0.296
0.274
39,500
33,700
28,745
2,695
0.224
19,710
4,250
0.355
40,280
4,060
0.339
36,500
2,695
0.224
18,510
3,740
3,550
3,285
2,890
2,880
2,870
4,420
4,295
4,060
3,040
3,025
3,010
0.313
0.297
0.275
0.240
0.239
0.238
0.370
0.360
0.340
0.252
0.251
0.250
39,500
33,700
28,745
21,600
21,475
21,370
44,815
41,385
36,500
21,345
21,230
21,110
4,250
0.355
32,890
4,420
0.370
34,790
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height
Compressive
H (in)
Strength f’c (psi)
Seismic
HD Bolt Dia (in) Applied Axial
Load 4
and Grade 3
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x8
92 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x8
92 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-32x8
92 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-44x8
92 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
3,355
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.254
20,795
3,355
0.254
20,795
5,080
0.388
40,495
4,810
0.368
36,045
5,270
5,105
4,810
0.402
0.390
0.368
44,825
41,070
36,045
3,430
0.260
20,395
3,430
0.260
20,395
5,080
0.388
34,645
5,955
5,870
5,740
0.455
0.448
0.439
46,095
44,690
42,755
3,555
0.269
20,175
3,555
0.269
20,175
5,080
0.388
30,985
6,170
0.471
40,220
3,420
0.151
17,045
3,860
0.171
19,700
5,910
0.263
35,310
6,690
6,600
6,460
0.298
0.294
0.288
44,310
43,035
41,305
3,420
0.151
16,555
3,960
0.175
19,610
5,910
0.263
32,375
7,175
0.320
43,185
3,420
0.151
16,020
4,085
0.181
19,500
5,910
0.263
29,900
7,175
0.320
38,100
2,375
2,160
1,360
3,000
2,335
1,540
0.139
0.126
0.080
0.176
0.137
0.090
8,945
8,130
5,130
11,295
8,795
5,795
2,375
0.139
8,945
1,685
3,655
2,990
2,190
0.098
0.214
0.175
0.128
6,335
13,755
11,255
8,255
2,375
0.139
8,945
2,085
4,390
4,205
3,410
0.122
0.257
0.246
0.199
7,845
16,530
15,830
12,830
2,950
0.094
7,610
2,080
4,510
3,545
2,380
0.066
0.144
0.113
0.076
5,365
11,645
9,145
6,145
2,950
0.094
7,610
2,475
5,490
4,525
3,360
0.079
0.175
0.144
0.107
6,385
14,175
11,675
8,675
2,825
2,160
1,360
3,000
2,335
1,540
2,895
2,480
1,685
3,655
2,990
2,190
2,895
2,880
2,085
4,870
4,205
3,410
3,660
3,240
2,080
4,510
3,545
2,380
3,660
3,635
2,475
5,490
4,525
3,360
0.165
0.126
0.080
0.176
0.137
0.090
0.169
0.145
0.098
0.214
0.175
0.128
0.169
0.168
0.122
0.285
0.246
0.199
0.117
0.103
0.066
0.144
0.113
0.076
0.117
0.116
0.079
0.175
0.144
0.107
10,630
8,130
5,130
11,295
8,795
5,795
10,910
9,335
6,335
13,755
11,255
8,255
10,910
10,845
7,845
18,330
15,830
12,830
9,440
8,365
5,365
11,645
9,145
6,145
9,440
9,385
6,385
14,175
11,675
8,675
2,950
0.094
7,610
3,660
0.117
9,440
5,655
0.180
14,590
5,245
0.167
13,530
2,965
7,375
6,405
5,245
0.094
0.235
0.204
0.167
7,655
19,030
16,530
13,530
11
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-12x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x9
104 1/4
3,000
1 1/8” HS
12
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
18,375
23,750
21,075
18,375
1,310
1,205
1,080
1,310
1,205
1,080
1,495
1,475
1,355
1,575
1,475
1,355
0.248
0.229
0.205
0.250
0.230
0.206
0.284
0.280
0.257
0.301
0.282
0.258
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
0.280
18,515
1,655
0.314
21,615
1,680
0.321
22,085
1,815
1,800
1,760
2,135
2,000
1,815
0.361
0.359
0.351
0.426
0.399
0.362
21,615
21,380
20,560
31,340
26,150
21,625
2,115
2,015
1,890
1,815
1,800
1,760
2,135
2,000
1,815
0.404
0.385
0.361
0.360
0.357
0.349
0.426
0.399
0.362
32,065
29,275
26,380
21,615
21,380
20,560
31,340
26,150
21,625
1,940
0.387
21,620
1,940
0.385
21,620
2,285
0.456
28,390
2,260
0.451
27,795
2,575
2,440
2,260
0.513
0.487
0.451
38,195
32,600
27,795
2,095
0.418
21,615
2,095
0.416
21,615
2,285
0.456
24,265
2,905
0.579
34,670
2,435
0.256
21,615
2,435
0.256
21,615
3,310
3,140
2,905
0.350
0.331
0.307
39,500
33,700
28,745
3,310
3,140
2,905
0.350
0.332
0.307
39,500
33,700
28,745
2,450
0.258
20,405
2,560
0.269
21,620
3,760
0.397
40,260
3,595
0.379
36,500
3,915
3,805
3,595
0.414
0.402
0.380
44,955
41,385
36,500
2,450
0.258
19,105
2,715
0.286
21,620
3,760
0.397
32,880
4,210
0.445
38,865
3,050
3,020
3,010
0.304
0.300
0.299
21,565
21,255
21,175
4,495
0.451
40,495
4,260
3,155
3,115
3,105
0.428
0.314
0.310
0.309
36,045
21,400
21,070
20,965
4,495
0.451
34,645
3,285
3,240
3,225
0.327
0.322
0.321
21,220
20,865
20,770
3,050
3,020
3,010
4,660
4,520
4,260
3,155
3,115
3,105
5,270
5,195
5,080
3,285
3,240
3,225
0.304
0.300
0.299
0.468
0.454
0.428
0.314
0.310
0.309
0.529
0.522
0.510
0.327
0.322
0.321
21,565
21,255
21,175
44,825
41,070
36,045
21,400
21,070
20,965
46,095
44,690
42,755
21,220
20,865
20,770
4,495
0.451
30,985
5,460
0.548
40,220
Allowable
In-Plane Shear
V 5 (lbs)
Drift at V
(lbs)
1,310
1,205
1,080
1,310
1,205
1,080
0.248
0.229
0.205
0.250
0.230
0.206
19,595
17,005
14,325
19,595
17,005
14,325
1,475
0.280
21,065
1,355
1,575
1,475
1,355
0.257
0.301
0.282
0.259
1,475
5
Uplift at V
(lbs)
5, 6
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-32x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-44x9
104 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-12x10
116 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.175
17,810
3,525
0.197
20,490
5,230
0.294
35,310
6,015
5,910
5,755
0.338
0.332
0.324
45,935
44,165
41,850
3,140
0.175
17,270
3,620
0.202
20,380
5,230
0.294
32,375
6,350
0.357
43,195
3,140
0.175
16,680
3,685
0.206
19,925
5,230
0.294
29,900
6,350
0.357
38,105
2,190
1,910
1,205
2,655
2,065
1,360
0.181
0.158
0.100
0.220
0.171
0.113
9,320
8,130
5,130
11,295
8,795
5,795
2,190
0.181
9,320
1,490
3,230
2,645
1,940
0.123
0.268
0.219
0.161
6,335
13,755
11,255
8,255
2,190
0.181
9,320
1,845
3,885
3,720
3,015
0.152
0.322
0.308
0.250
7,845
16,530
15,830
12,830
2,745
0.121
8,005
1,840
3,995
3,135
2,105
0.081
0.177
0.139
0.093
5,365
11,645
9,145
6,145
2,745
0.121
8,005
2,190
4,860
4,005
2,975
0.096
0.215
0.177
0.132
6,385
14,175
11,675
8,670
2,500
1,910
1,205
2,655
2,065
1,360
2,665
2,195
1,490
3,230
2,645
1,940
2,665
2,550
1,845
4,310
3,720
3,015
3,405
2,870
1,840
3,995
3,135
2,105
3,405
3,220
2,190
4,860
4,005
2,975
0.207
0.158
0.100
0.220
0.171
0.113
0.221
0.182
0.123
0.268
0.219
0.161
0.221
0.211
0.153
0.357
0.308
0.250
0.151
0.127
0.081
0.177
0.139
0.093
0.151
0.142
0.097
0.215
0.177
0.132
10,630
8,130
5,130
11,295
8,795
5,795
11,350
9,335
6,335
13,755
11,255
8,255
11,350
10,845
7,845
18,330
15,830
12,830
9,930
8,365
5,365
11,645
9,145
6,145
9,930
9,385
6,385
14,175
11,675
8,670
2,745
0.121
8,005
3,405
0.151
9,930
2,625
0.116
7,655
5,260
0.233
15,340
4,640
1,175
1,080
965
1,175
1,080
965
0.206
0.273
0.252
0.225
0.274
0.253
0.226
13,530
19,595
17,005
14,325
19,595
17,005
14,325
1,185
0.276
17,740
1,350
1,325
1,215
0.316
0.310
0.284
21,810
21,075
18,375
2,625
6,525
5,670
4,640
1,175
1,080
965
1,175
1,080
965
1,340
1,325
1,215
1,415
1,325
1,215
0.116
0.289
0.251
0.205
0.273
0.252
0.225
0.275
0.253
0.226
0.313
0.308
0.283
0.331
0.310
0.284
7,655
19,030
16,530
13,530
19,595
17,005
14,325
19,595
17,005
14,325
21,575
21,075
18,375
23,750
21,075
18,375
1,185
0.276
16,095
1,485
0.346
21,615
19,015
1,900
1,805
1,695
0.444
0.423
0.397
32,065
29,275
26,380
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
3,140
1,350
0.316
13
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x10
116 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x10
116 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x10
116 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x10
116 1/4
3,000
1 1/8” HS
14
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.414
0.411
0.402
0.488
0.457
0.414
21,620
21,380
20,560
31,340
26,150
21,625
1,625
1,615
1,580
1,915
1,795
1,625
0.412
0.409
0.400
0.488
0.457
0.414
21,620
21,380
20,560
31,340
26,150
21,625
1,740
0.442
21,615
1,740
0.440
21,615
2,000
0.509
27,060
2,310
2,190
2,030
0.587
0.557
0.516
38,195
32,600
27,795
1,880
0.478
21,620
1,880
0.476
21,620
2,000
0.509
23,435
2,540
0.646
33,185
2,185
0.282
21,620
2,185
0.282
21,620
2,970
2,815
2,605
0.386
0.366
0.339
39,500
33,700
28,745
2,970
2,815
2,605
0.386
0.366
0.339
39,500
33,700
28,745
2,255
0.291
21,110
2,295
0.296
21,620
3,370
0.438
40,205
3,220
0.419
36,500
3,510
3,410
3,220
0.456
0.443
0.419
44,955
41,385
36,500
2,255
0.291
19,700
2,435
0.314
21,620
3,370
0.438
32,855
4,070
0.529
44,000
2,740
0.348
21,615
2,740
0.348
21,615
3,970
0.509
39,075
3,820
2,855
2,845
2,835
0.489
0.362
0.361
0.360
36,045
21,620
21,545
21,430
3,970
0.509
33,835
2,975
2,965
2,950
0.378
0.376
0.375
21,465
21,365
21,260
4,180
4,055
3,820
2,855
2,845
2,835
4,725
4,660
4,555
2,975
2,965
2,950
0.536
0.519
0.489
0.362
0.361
0.360
0.606
0.597
0.584
0.378
0.376
0.375
44,825
41,070
36,045
21,620
21,545
21,430
46,095
44,690
42,755
21,465
21,365
21,260
3,970
0.509
30,390
4,895
0.627
40,220
2,900
0.199
18,450
4,690
0.325
35,285
2,900
0.199
17,865
3,245
3,215
3,200
5,395
5,300
5,165
3,335
3,295
3,285
0.222
0.220
0.219
0.373
0.367
0.357
0.229
0.226
0.225
21,160
20,910
20,820
45,935
44,165
41,850
21,040
20,755
20,660
4,690
0.325
32,355
5,695
0.394
43,200
2,900
0.199
17,230
3,445
3,400
3,390
0.236
0.233
0.232
20,895
20,580
20,490
4,690
0.325
29,885
5,695
0.394
38,110
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
1,625
1,615
1,580
1,915
1,795
1,625
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-32x10
116 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-44x10
116 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x11
128 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x11
128 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
2,030
1,715
1,080
2,380
1,855
1,220
2,030
1,970
1,335
2,900
2,370
1,740
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.230
0.194
0.122
0.270
0.210
0.138
0.230
0.223
0.151
0.329
0.269
0.197
9,630
8,130
5,130
11,295
8,795
5,795
9,630
9,335
6,335
13,755
11,255
8,255
2,030
0.230
9,630
1,655
3,485
3,335
2,705
0.187
0.395
0.378
0.306
7,845
16,535
15,830
12,830
2,570
0.154
8,355
1,650
3,580
2,810
1,890
0.099
0.214
0.168
0.113
5,365
11,645
9,145
6,145
2,570
0.154
8,355
1,965
4,360
3,590
2,665
0.118
0.261
0.215
0.160
6,385
14,175
11,675
8,675
2,240
1,715
1,080
2,380
1,855
1,220
2,470
1,970
1,335
2,900
2,370
1,740
2,470
2,285
1,655
3,865
3,335
2,705
3,185
2,575
1,650
3,580
2,810
1,890
3,185
2,885
1,965
4,360
3,590
2,665
0.254
0.194
0.122
0.269
0.210
0.138
0.280
0.223
0.151
0.328
0.268
0.197
0.280
0.259
0.187
0.437
0.378
0.306
0.191
0.154
0.099
0.214
0.168
0.113
0.191
0.173
0.117
0.261
0.215
0.160
10,630
8,130
5,130
11,295
8,795
5,795
11,725
9,335
6,335
13,755
11,255
8,255
11,725
10,845
7,845
18,330
15,830
12,830
10,355
8,365
5,365
11,645
9,145
6,145
10,355
9,385
6,385
14,175
11,675
8,675
2,570
0.154
8,355
3,185
0.191
10,355
2,355
0.141
7,655
4,915
0.294
15,980
4,160
1,475
1,465
1,430
1,735
1,625
1,475
0.249
0.466
0.463
0.452
0.549
0.515
0.466
13,530
21,615
21,380
20,560
31,340
26,150
21,625
2,355
5,855
5,085
4,160
1,475
1,465
1,430
1,735
1,625
1,475
0.141
0.350
0.304
0.249
0.465
0.462
0.451
0.549
0.515
0.466
7,655
19,030
16,530
13,530
21,615
21,380
20,560
31,340
26,150
21,625
1,575
0.498
21,620
1,575
0.497
21,620
1,775
0.561
26,090
2,090
1,985
1,840
0.662
0.628
0.581
38,195
32,600
27,795
1,705
0.539
21,615
1,705
0.538
21,615
1,775
0.561
22,800
2,255
0.713
32,090
1,980
0.308
21,615
1,980
0.311
21,615
2,690
2,550
2,365
0.420
0.399
0.369
39,500
33,700
28,745
2,690
2,550
2,365
0.420
0.399
0.369
39,500
33,700
28,745
2,080
0.324
21,600
2,080
0.327
21,620
2,830
0.442
34,360
2,830
0.442
34,360
2,080
0.324
20,115
2,210
0.347
21,620
2,830
0.442
29,585
2,830
0.442
29,585
15
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x11
128 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x11
128 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-32x11
128 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-44x11
128 1/4
3,000
7/8” HS
16
7/8” STD
4,000
7/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
2,485
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.393
21,620
2,485
0.393
21,620
3,515
0.561
37,160
3,460
0.553
36,045
3,790
3,675
3,460
0.605
0.587
0.553
44,825
41,070
36,045
2,585
0.409
21,615
2,585
0.409
21,615
3,515
0.561
32,660
4,285
4,220
4,130
0.684
0.674
0.659
46,095
44,690
42,755
2,715
0.429
21,620
2,715
0.429
21,620
3,515
0.561
29,505
4,440
0.708
40,220
2,695
0.223
19,010
3,730
0.308
28,985
2,695
0.223
18,385
2,975
2,960
2,950
4,890
4,805
4,680
3,090
3,045
3,030
0.245
0.244
0.243
0.405
0.398
0.387
0.255
0.251
0.250
21,465
21,355
21,250
45,935
44,165
41,850
21,605
21,215
21,110
3,730
0.308
27,245
5,160
0.427
43,175
2,695
0.223
17,710
3,200
3,145
3,135
0.264
0.259
0.258
21,445
21,055
20,970
3,730
0.308
25,600
5,160
0.427
38,090
1,895
1,555
980
2,160
1,680
1,105
1,895
1,785
1,210
2,625
2,150
1,575
0.285
0.234
0.147
0.325
0.253
0.167
0.285
0.268
0.182
0.395
0.324
0.237
9,920
8,130
5,130
11,295
8,795
5,795
9,920
9,335
6,335
13,755
11,255
8,255
1,895
0.285
9,920
1,500
0.225
7,845
2,910
0.438
15,235
2,450
2,415
2,330
1,495
3,245
2,550
1,715
0.369
0.191
0.184
0.118
0.255
0.201
0.135
12,830
8,665
8,365
5,365
11,645
9,145
6,145
2,030
1,555
980
2,160
1,680
1,105
2,260
1,785
1,210
2,625
2,150
1,575
2,300
2,070
1,500
3,500
3,025
2,450
2,990
2,330
1,495
3,245
2,550
1,715
2,990
2,615
1,780
3,950
3,255
2,415
2,990
2,970
2,135
4,875
4,610
3,770
0.306
0.234
0.148
0.325
0.253
0.167
0.341
0.269
0.182
0.395
0.324
0.237
0.347
0.312
0.226
0.527
0.455
0.369
0.236
0.184
0.118
0.256
0.201
0.135
0.236
0.206
0.140
0.311
0.256
0.190
0.236
0.234
0.168
0.384
0.363
0.297
10,630
8,130
5,130
11,295
8,795
5,795
11,835
9,335
6,335
13,755
11,255
8,255
12,050
10,845
7,845
18,330
15,830
12,830
10,730
8,365
5,365
11,645
9,145
6,145
10,730
9,385
6,385
14,175
11,670
8,675
10,730
10,655
7,655
17,490
16,530
13,530
2,415
0.191
8,665
1,780
3,950
3,255
2,415
0.141
0.311
0.256
0.190
6,385
14,175
11,670
8,675
2,415
0.191
8,665
2,135
0.169
7,655
4,155
0.327
14,905
3,770
0.297
13,530
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x12
140 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x12
140 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x12
140 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x12
140 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
1,345
1,340
1,310
1,590
1,490
1,350
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
0.521
0.517
0.505
0.614
0.575
0.521
21,615
21,380
20,560
31,310
26,150
21,625
1,345
1,340
1,310
1,590
1,490
1,350
0.520
0.516
0.504
0.614
0.575
0.521
21,615
21,380
20,560
31,340
26,150
21,625
1,440
0.557
21,615
1,440
0.556
21,615
1,590
0.614
25,160
1,915
1,815
1,680
0.739
0.701
0.650
38,195
32,600
27,795
1,555
0.602
21,620
1,555
0.601
21,620
1,590
0.614
22,165
2,015
0.779
31,020
1,810
0.334
21,620
1,810
0.334
21,620
2,460
2,335
2,160
0.456
0.432
0.400
39,500
33,700
28,745
2,460
2,335
2,160
0.456
0.432
0.400
39,500
33,700
28,745
1,905
0.351
21,615
1,905
0.351
21,615
2,585
0.479
34,295
2,585
0.479
34,295
1,935
0.357
20,530
2,020
0.373
21,620
2,585
0.479
29,545
2,585
0.479
29,545
2,270
0.470
21,620
2,270
0.470
21,620
3,030
0.633
33,190
3,465
3,360
3,165
0.724
0.702
0.661
44,825
41,070
36,045
2,365
0.490
21,620
2,365
0.490
21,620
3,030
0.633
29,955
3,730
0.779
41,750
2,480
0.514
21,620
2,480
0.514
21,620
3,030
0.633
27,410
3,730
0.779
35,785
2,515
0.246
19,490
2,735
0.268
21,620
3,410
0.334
28,975
2,515
0.246
18,825
4,470
4,395
4,280
2,830
2,825
2,815
0.439
0.431
0.420
0.277
0.277
0.276
45,935
44,165
41,850
21,620
21,605
21,490
3,410
0.334
27,235
4,720
0.463
43,195
2,515
0.246
18,115
2,935
2,925
2,915
0.288
0.287
0.286
21,550
21,460
21,365
3,410
0.334
25,595
4,720
0.463
38,105
17
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-32x12
140 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-44x12
140 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-15x13
152 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-18x13
152 1/4
3,000
1 1/8” HS
18
1 1/8” STD
4,000
1 1/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
1,775
1,420
895
1,975
1,535
1,010
1,775
1,630
1,105
2,405
1,965
1,440
0.347
0.278
0.175
0.386
0.300
0.198
0.347
0.319
0.216
0.470
0.384
0.282
10,160
8,130
5,130
11,295
8,795
5,795
10,160
9,335
6,335
13,755
11,255
8,255
1,775
0.347
10,160
1,370
0.268
7,845
2,660
0.520
15,225
2,240
2,280
2,135
1,370
2,970
2,330
1,565
0.438
0.231
0.216
0.139
0.301
0.237
0.159
12,830
8,945
8,365
5,365
11,645
9,145
6,145
2,280
0.231
8,945
1,625
3,615
2,975
2,210
0.165
0.367
0.302
0.225
6,385
14,175
11,675
8,675
2,280
0.231
8,945
1,950
0.198
7,655
1,855
1,420
895
1,975
1,535
1,010
2,070
1,630
1,105
2,405
1,965
1,440
2,155
1,895
1,370
2,945
2,765
2,240
2,770
2,135
1,370
2,970
2,330
1,565
2,820
2,390
1,625
3,615
2,975
2,210
2,820
2,715
1,950
0.364
0.278
0.175
0.386
0.300
0.198
0.405
0.319
0.217
0.470
0.385
0.282
0.422
0.371
0.268
0.576
0.541
0.438
0.281
0.216
0.139
0.302
0.237
0.159
0.286
0.242
0.165
0.367
0.302
0.225
0.286
0.275
0.198
10,630
8,130
5,130
11,295
8,795
5,795
11,835
9,335
6,335
13,755
11,255
8,255
12,335
10,845
7,845
16,860
15,830
12,830
10,865
8,365
5,365
11,645
9,145
6,145
11,060
9,385
6,385
14,175
11,675
8,675
11,060
10,655
7,655
3,800
0.386
14,910
3,955
0.402
15,515
3,450
1,240
1,235
1,205
1,435
1,370
1,240
0.350
0.576
0.573
0.559
0.666
0.637
0.577
13,530
21,615
21,380
20,560
29,315
26,150
21,625
3,450
1,240
1,235
1,205
1,465
1,370
1,240
0.351
0.575
0.572
0.558
0.680
0.637
0.577
13,530
21,615
21,380
20,560
31,340
26,150
21,625
1,325
0.616
21,620
1,325
0.615
21,620
1,435
0.666
24,360
1,765
1,670
1,550
0.819
0.777
0.719
38,195
32,600
27,795
1,435
0.665
21,620
1,435
0.666
21,605
1,820
0.846
30,090
1,665
0.358
21,615
1,665
0.359
21,615
2,250
2,150
1,990
0.487
0.465
0.431
38,395
33,700
28,745
2,265
2,150
1,990
0.490
0.465
0.431
39,500
33,700
28,745
1,755
0.377
21,615
1,755
0.377
21,615
2,250
0.487
31,080
2,380
0.515
34,260
1,805
0.388
20,840
1,860
0.400
21,615
2,250
0.487
27,415
2,380
0.515
29,520
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-21x13
152 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
1 1/8” STD
2,500
1 1/8” HS
1 1/8” STD
HFX-24x13
152 1/4
3,000
1 1/8” HS
1 1/8” STD
4,000
1 1/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-32x13
152 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
7/8” STD
2,500
7/8” HS
7/8” STD
HFX-44x13
152 1/4
3,000
7/8” HS
7/8” STD
4,000
7/8” HS
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
2,095
0.518
21,620
2,095
0.518
21,620
2,850
0.666
34,445
3,190
3,095
2,915
0.747
0.724
0.682
44,825
41,070
36,045
2,180
0.539
21,620
2,180
0.539
21,620
2,850
0.666
30,845
3,610
3,555
3,480
0.844
0.832
0.814
46,095
44,690
42,755
2,285
0.566
21,620
2,285
0.566
21,620
2,850
0.666
28,110
3,615
0.846
38,380
2,360
0.271
19,935
2,520
0.289
21,615
3,140
0.360
28,960
4,120
4,045
3,940
0.473
0.464
0.452
45,935
44,165
41,850
2,360
0.271
19,235
2,605
0.299
21,620
3,140
0.360
27,220
4,350
0.499
43,230
2,360
0.271
18,490
2,715
0.311
21,620
3,140
0.360
25,580
4,350
0.499
38,130
1,670
1,310
825
1,820
1,415
935
1,670
1,505
1,020
2,215
1,810
1,330
0.415
0.325
0.205
0.452
0.352
0.232
0.415
0.373
0.253
0.550
0.450
0.330
10,380
8,130
5,130
11,295
8,795
5,795
10,380
9,335
6,335
13,755
11,255
8,255
1,670
0.415
10,380
1,265
0.314
7,845
1,710
1,310
825
1,820
1,415
935
1,905
1,505
1,020
2,215
1,810
1,330
2,025
1,745
1,265
0.425
0.325
0.205
0.452
0.352
0.232
0.473
0.373
0.253
0.550
0.450
0.330
0.503
0.434
0.314
10,630
8,130
5,130
11,295
8,795
5,795
11,835
9,335
6,335
13,755
11,255
8,255
12,585
10,845
7,845
2,305
0.573
14,325
2,305
0.573
14,325
2,065
2,160
1,965
1,260
2,735
2,145
1,445
0.513
0.277
0.252
0.162
0.351
0.275
0.185
12,830
9,200
8,365
5,365
11,645
9,145
6,145
2,160
0.277
9,200
1,500
3,110
2,740
2,035
0.192
0.399
0.352
0.261
6,385
13,245
11,675
8,675
2,160
0.277
9,200
1,795
0.230
7,655
2,065
2,550
1,965
1,260
2,735
2,145
1,445
2,665
2,205
1,500
3,110
2,740
2,035
2,665
2,500
1,795
0.513
0.327
0.252
0.162
0.351
0.275
0.185
0.342
0.283
0.192
0.399
0.352
0.261
0.342
0.321
0.231
12,830
10,865
8,365
5,365
11,645
9,145
6,145
11,355
9,385
6,385
13,245
11,675
8,675
11,355
10,655
7,655
3,110
0.399
13,245
3,110
0.399
13,245
19
HARDY
™
FRAME
Model
Number
Table 1.1A Hardy Frame® Balloon Wall Installation - on Concrete1,2
®
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
HFX-15x14
HFX-18x14
164 1/4
HFX-21x14
HFX-24x14
HFX-15x15
HFX-18x15
176 1/4
HFX-21x15
HFX-24x15
HFX-15x16
HFX-18x16
188 1/4
HFX-21x16
HFX-24x16
HFX-15x17
HFX-18x17
200 1/4
HFX-21x17
HFX-24x17
HFX-15x18
HFX-18x18
212 1/4
HFX-21x18
HFX-24x18
20
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” HS
1 1/8” HS
1 1/8” HS
1 1/8” HS
1 1/8” HS
ANCHORAGE NOMENCLATURE
UNREINFORCED
1 1/8-STD-14-20
Ca 1, 2
le
ROD GRADE
ROD DIAMETER
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
1,120
0.611
1,380
0.642
2,115
0.512
2,090
0.527
1,045
0.655
1,310
0.701
1,975
0.591
1,960
0.597
980
0.700
1,250
0.760
1,850
0.675
1,825
0.625
925
0.745
1,195
0.824
1,745
0.765
1,695
0.660
875
0.789
1,150
0.887
1,645
0.860
1,595
0.697
4,000
3,500
3,000
2,500
2,000
ANCHORAGE NOMENCLATURE
REINFORCED
1 1/8-STD-RA
REINFORCED ANCHORAGE
ROD GRADE
ROD DIAMETER
Wind
Uplift at
V 5, 6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
20,680
18,925
17,460
18,475
17,545
16,630
24,300
22,895
21,555
18,855
18,240
17,580
20,745
18,975
17,500
18,935
17,955
16,990
24,370
22,955
21,605
19,000
18,375
17,700
20,805
19,025
17,540
19,435
18,385
17,365
24,430
23,005
21,650
18,875
18,255
17,595
20,860
19,065
17,570
19,890
18,775
17,705
24,485
23,050
21,690
18,600
18,005
17,360
20,905
19,100
17,600
20,445
19,250
18,120
24,530
23,090
21,725
18,540
17,950
17,310
1,250
0.767
1,490
0.913
1,960
0.912
2,850
0.862
3,015
0.913
3,190
0.805
1,185
0.833
1,390
0.979
1,830
0.979
2,620
0.979
2,830
0.859
1,125
0.901
1,305
1.046
25,325
29,870
25,135
32,455
28,170
25,320
40,385
37,905
33,290
33,155
30,680
28,505
26,150
29,995
25,205
32,595
28,250
25,380
39,120
33,860
30,405
30,790
28,750
26,890
27,015
30,105
25,265
32,655
28,285
25,410
34,255
30,715
28,005
31,140
29,040
27,130
27,940
30,200
25,320
32,780
28,360
25,465
37,390
32,810
29,620
30,685
28,665
26,815
28,940
30,285
25,365
33,090
28,545
25,600
33,445
30,135
27,555
30,505
28,515
26,685
1,715
1.046
2,295
2,670
0.913
1,070
0.970
1,230
1.113
1,615
1.113
2,260
1.112
2,485
0.967
1,025
1.041
1,160
1.179
1,530
1.179
2,010
2,335
1.020
ANCHORAGE NOMENCLATURE
BACK TO BACK
1 1/8-STD-BB-RA
REINFORCED ANCHORAGE
BACK TO BACK INSTALLATION
ROD GRADE
ROD DIAMETER
HARDY
™
FRAME
Model
Number
Concrete
Net Height Compressive
H (in)
Strength f’c
(psi)
HFX-15x19
HFX-18x19
224 1/4
HFX-21x19
HFX-24x19
HFX-15x20
HFX-18x20
236 1/4
HFX-21x20
HFX-24x20
Table 1.1A Hardy Frame® Balloon Wall Installation - on Concrete1,2
®
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
2,500
3,000
4,000
Seismic
HD Bolt Dia (in) Applied Axial
and Grade 3
Load 4
1 1/8” HS
1 1/8” HS
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
825
0.834
1,105
0.953
1,560
0.961
1,515
0.734
785
0.879
1,070
1.020
1,485
1.068
1,460
0.770
2,000
2,000
Wind
Uplift at
V 5, 6 (lbs)
20,950
19,130
17,625
20,885
19,625
18,440
24,575
23,130
21,755
18,620
18,020
17,380
20,985
19,160
17,650
21,490
20,135
18,875
24,610
23,160
21,785
18,965
18,340
17,670
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5, 6 (lbs)
970
1.098
1,100
1.246
28,940
30,360
25,410
33,190
28,600
25,640
30,460
27,910
25,770
30,700
28,680
26,825
28,940
30,430
25,445
26,315
23,990
22,075
28,060
26,020
24,210
31,190
29,085
27,170
1,450
1.246
1,800
2,220
1.072
920
1.156
1,045
1.312
1,220
1.166
1,620
1.313
2,130
1.124
For SI: 1 inch = 25.4 mm, 1 foot = 304.8 mm, 1 lb = 4.45 N, 1 psi 6.89 kPa.
Notes
1)The values in this table are Allowable Stress Design (ASD) excluding a 1.33 stress increase and pertain to installation on 2500, 3000, and 4000 psi concrete or nut & washer with 5,000 psi minimum non-shrink grout.
2)For installation on a nut & washer (only) table values must be multiplied by 0.80.
3) STD indicates bolts complying with ASTM F1554 Grade 36. HS rods include, but are not limited to ASTM F1554 Grade 105, ASTM A193 Grade B7 or
ASTM A354 Grade BD.
4)The applied vertical axial loads are concurrent with the allowable shear load. For Panels the axial load must be applied within the middle 1/3 of the Panel width or be uniformly distributed across the entire Panel width. For Brace Frame the axial load is acting and along the centerline of the post.
5) Allowable Shear, Drift @ V and Uplift @ V values may be linearly interpolated for intermediate height or axial loads. 6) The Uplift values listed assume no resisting axial load. To determine anchor tension loads in Panels at design shear values and including the effect of axial loads. For Brace Frames the anchor tension load equals uplift minus P, where P is the axial load in the Post.
HFX/S Table 2.1A
Concrete Table 1.1A
FOUNDATION PLAN
FOUNDATION PLAN
For referenced details see catalog pages 50-53
21
HARDY
™
FRAME
On Wood Sill Plate
®
Hardy Frame® Panel
Hardy Frame® Panel
Hardy Frame® Panel
Hardy Frame® Panel
at top plates
with 2x filler
with 4x filler
at Portal
1/4 xPANEL
3˝ screws
1/4 x 4PANEL
1/2˝ screws
1/4 x 3˝ screws. 78 inch
HARDY FRAME
AT TOP
PLATES
HARDY
FRAME
WITH 2X FILLER 1/4 x 3˝ screws
HARDYPanel
FRAME
PANEL
AT PORTAL
*custom heights available
heights
include
HARDY FRAME PANEL WITH
welded
straps
4X FILLER
®
®
®
®
®
HARDY FRAME PANEL
BOTTOM
HardySILL
Frame® Panel
ON MUD
on wood sill
•Panels installed on wood sill plates have more ductility but, for some
sizes the allowable shear is less to account for crushing of wood below.
•Allowable values in Table 1.2 have been reduced when necessary to
maintain code drift limit.
•Because the Brace Frame base is wider, overturning forces cause less
compression on wood sill.
Installation:
-Set bolts 4 1/4˝ inches above concrete
-Moisture barrier (15# felt, Moist Stop, Etc.) recommended when
installing on treated wood.
Hardy Frame®
Brace Frame
at top plates
1/4 x 3˝ screws
®
HARDY FRAME BRACE FRAME
TOP WITH TOP PLATE
®
HARDY FRAME BRACE FRAME
BOTTOM ON MUD SILL ®
22
Hardy Frame
Brace Frame
on wood sill
Hardy Frame®
Brace Frame
with 2x filler
1/4 x 4 1/2˝ screws
®
HARDY FRAME BRACE FRAME
TOP WITH FILLER
Hardy Frame®
Brace Frame
with 4x filler
1/4 x 3˝ screws
*custom heights available
®
HARDY FRAME BRACE FRAME
4X FILLER
HARDY
™
FRAME
Table 1.2 Hardy Frame® Installation - on 2x Sill Plate1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-12x78
78
1 1/8" STD
HFX-15x78
78
1 1/8" STD
HFX-18x78
78
1 1/8" STD
HFX-21x78
78
1 1/8" STD
HFX-24x78
78
1 1/8" STD
HFX-12x8
92 1/4
1 1/8" STD
HFX-15x8
92 1/4
1 1/8" STD
HFX-18x8
92 1/4
1 1/8" STD
HFX-21x8
92 1/4
1 1/8" STD
HFX-24x8
92 1/4
1 1/8" STD
HFX-32x8
92 1/4
7/8" STD
HFX-44x8
92 1/4
7/8" STD
7/8" HS
HFX-12x9
104 1/4
1 1/8" STD
HFX-15x9
104 1/4
1 1/8" STD
HFX-18x9
104 1/4
1 1/8" STD
HFX-21x9
104 1/4
1 1/8" STD
HFX-24x9
104 1/4
1 1/8" STD
HFX-32x9
104 1/4
7/8" STD
7/8" STD
HFX-44x9
104 1/4
7/8" HS
HFX-12x10
116 1/4
1 1/8" STD
HFX-15x10
116 1/4
1 1/8" STD
HFX-18x10
116 1/4
1 1/8" STD
HFX-21x10
116 1/4
1 1/8" STD
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,065
770
340
1,445
1,035
495
1,975
1,380
670
2,460
1,725
840
2,950
2,070
1,010
905
650
285
1,205
875
420
1,670
1,165
565
2,080
1,460
710
2,495
1,750
855
2,135
1,470
675
2,950
2,245
1,085
3,215
2,245
1,085
805
575
255
1,055
775
370
1,475
1,035
500
1,840
1,290
630
2,210
1,550
755
1,890
1,300
595
2,745
1,990
960
2,845
1,990
960
725
515
225
940
695
335
1,325
925
450
1,650
1,155
565
Drift at V
(lbs)
0.341
0.278
0.167
0.341
0.269
0.166
0.287
0.219
0.137
0.267
0.203
0.126
0.220
0.168
0.106
0.404
0.327
0.196
0.404
0.324
0.199
0.336
0.257
0.161
0.322
0.244
0.151
0.259
0.198
0.125
0.183
0.134
0.075
0.159
0.112
0.065
0.156
0.112
0.065
0.456
0.368
0.221
0.456
0.370
0.227
0.379
0.289
0.182
0.369
0.280
0.172
0.291
0.222
0.140
0.222
0.162
0.090
0.188
0.133
0.077
0.186
0.133
0.077
0.508
0.408
0.246
0.509
0.417
0.256
0.420
0.321
0.202
0.417
0.315
0.194
Wind
5
Uplift at V
(lbs)
11,500
7,220
1,220
11,875
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
11,565
7,220
1,220
11,725
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
7,610
5,795
2,795
8,295
5,795
2,795
11,610
7,220
1,220
11,610
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,005
5,795
2,795
8,295
5,795
2,795
11,640
7,220
1,220
11,510
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
5,6
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
1,130
770
340
1,485
1,035
495
1,975
1,380
670
2,460
1,725
840
2,950
2,070
1,010
955
650
285
1,255
875
420
1,670
1,165
565
2,080
1,460
710
2,495
1,750
855
2,135
1,470
675
3,215
2,245
1,085
3,215
2,245
1,085
845
575
255
1,110
775
370
1,475
1,035
500
1,840
1,290
630
2,210
1,550
755
1,890
1,300
595
2,845
1,990
960
2,845
1,990
960
760
515
225
995
695
335
1,325
925
450
1,650
1,155
565
0.373
0.278
0.167
0.353
0.268
0.166
0.286
0.219
0.137
0.267
0.203
0.126
0.220
0.168
0.106
0.438
0.327
0.196
0.426
0.323
0.199
0.336
0.257
0.161
0.322
0.244
0.151
0.259
0.198
0.125
0.183
0.134
0.075
0.156
0.112
0.065
0.156
0.112
0.065
0.492
0.368
0.221
0.488
0.369
0.227
0.379
0.289
0.182
0.369
0.280
0.172
0.291
0.223
0.141
0.222
0.162
0.090
0.186
0.133
0.077
0.186
0.133
0.077
0.546
0.408
0.246
0.551
0.416
0.255
0.420
0.321
0.202
0.417
0.315
0.194
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8295
5795
2795
8295
5795
2795
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8295
5,795
2,795
8,295
5,795
2,795
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
23
HARDY
™
FRAME
Table 1.2 Hardy Frame® Installation - on 2x Sill Plate1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-32x10
116 1/4
7/8" STD
HFX-44x10
116 1/4
7/8" STD
HFX-15x11
128 1/4
1 1/8" STD
HFX-18x11
128 1/4
1 1/8" STD
HFX-21x11
128 1/4
1 1/8" STD
HFX-24x11
128 1/4
1 1/8" STD
HFX-32x11
128 1/4
7/8"STD
HFX-44x11
128 1/4
7/8" STD
HFX-15x12
140 1/4
1 1/8" STD
HFX-18x12
140 1/4
1 1/8" STD
HFX-21x12
140 1/4
1 1/8" STD
HFX-24x12
140 1/4
1 1/8" STD
HFX-32x12
140 1/4
7/8" STD
HFX-44x12
140 1/4
7/8" STD
HFX-15x13
152 1/4
1 1/8" STD
HFX-18x13
152 1/4
1 1/8" STD
HFX-21x13
152 1/4
1 1/8" STD
HFX-24x13
152 1/4
1 1/8" STD
HFX-32x13
152 1/4
7/8" STD
HFX-44x13
152 1/4
7/8" STD
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,695
1,170
535
2,550
1,785
860
845
630
300
1,200
840
405
1,500
1,050
510
1,795
1,260
615
1,535
1,060
485
2,315
1,615
780
770
575
275
1,095
770
370
1,370
960
465
1,640
1,150
565
1,405
970
445
2,115
1,480
715
705
530
255
1,010
705
345
1,260
885
430
1,510
1,060
520
1,295
890
410
1,950
1,360
655
0.265
0.193
0.106
0.220
0.157
0.090
0.561
0.464
0.284
0.462
0.353
0.222
0.465
0.352
0.216
0.355
0.272
0.172
0.311
0.226
0.123
0.257
0.184
0.104
0.613
0.513
0.313
0.503
0.385
0.243
0.532
0.401
0.244
0.386
0.296
0.187
0.362
0.262
0.141
0.296
0.211
0.119
0.666
0.561
0.342
0.543
0.416
0.262
0.582
0.439
0.266
0.419
0.321
0.203
0.417
0.300
0.161
0.338
0.241
0.135
Wind
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
8,040
5,540
2,540
8,295
5,795
2,795
11,430
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
11,345
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
11,265
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
1,695
1,170
535
2,550
1,785
860
905
630
300
1,200
840
405
1,500
1,050
510
1,795
1,260
615
1,535
1,060
485
2,315
1,615
780
825
575
275
1,095
770
370
1,370
960
465
1,640
1,150
565
1,405
970
445
2,115
1,480
715
760
530
255
1,010
705
345
1,260
885
430
1,510
1,060
520
1,295
890
410
1,950
1,360
655
0.265
0.192
0.106
0.220
0.157
0.090
0.614
0.464
0.284
0.463
0.354
0.223
0.465
0.352
0.216
0.354
0.271
0.172
0.311
0.226
0.123
0.257
0.183
0.104
0.678
0.512
0.313
0.503
0.385
0.243
0.532
0.401
0.244
0.387
0.296
0.187
0.362
0.262
0.141
0.296
0.211
0.119
0.743
0.561
0.342
0.544
0.416
0.263
0.582
0.439
0.266
0.418
0.320
0.203
0.417
0.300
0.161
0.338
0.241
0.135
8,040
5,540
2,540
8,295
5,795
2,795
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
12,220
7,220
1,220
8,040
5,540
2,540
8,295
5,795
2,795
For
SI: 1 inch = 25.4 mm, 1 lbf = 4.45 N
24
1) The values in this table are Allowable Stress Design (ASD) excluding a 1.33 stress increase and pertain to installation on a Wood Sill Plate supported on concrete or masonry foundations.
2) Wood Sill Plate for Panels assumes 2x wood sill plate (Fc^= 625 psi) below the Panel or Brace Frame.
3) STD indicates bolts complying with ASTM F1554 Grade 36. HS rods include, but are not limited to ASTM F1554 Grade 105, ASTM A193 Grade B7 or
ASTM A354 Grade BD.
4) The additional vertical axial loads are concurrent with the allowable shear load. For Panels the axial load must be applied within the middle 1/3 of the Panel width or be uniformly distributed across the entire Panel width. For Brace Frames the axial load is acting along the centerline of the post.
5) Allowable Shear, Drift @ V and Uplift @ V values may be linearly interpolated for intermediate height or axial loads. 6) The Uplift values listed assume no resisting axial load. To determine the anchor tension load in Panels at design shear values and including the effect of axial loads, the tension load equals uplift minus P/2, where P is the axial load on the Panel. For Brace Frames the anchor tension load equals uplift minus P, where P is the axial load on the Post.
HARDY
™
FRAME
Table 1.2 Hardy Frame® Installation - on 2x Sill Plate1,2
®
On 2x Plate Table 1.2
On
FOUNDATION PLAN
For referenced details see catalog pages 50-53
ANCHORAGE NOMENCLATURE
UNREINFORCED
1 1/8-STD-14-20
Ca 1, 2
le
ROD GRADE
ROD DIAMETER
ANCHORAGE NOMENCLATURE
REINFORCED
1 1/8-STD-RA
REINFORCED ANCHORAGE
ROD GRADE
ROD DIAMETER
ANCHORAGE NOMENCLATURE
BACK TO BACK
1 1/8-STD-BB-RA
REINFORCED ANCHORAGE
BACK TO BACK INSTALLATION
ROD GRADE
ROD DIAMETER
25
HARDY
™
FRAME
On Raised Floor
®
•Allowable values in Table 1.2A have been
reduced when necessary to maintain
code drift limit.
•Table values for Panels installed on a
wood floor system assume installation of
Hardy Frame® Panel
Hardy Frame® Panel
a Hardy Frame® Bearing Plate.
with 2x filler
with 4x filler
HARDY FRAME PANEL WITH 2X FILLER
1/4 x 4 1/2" screws
1/4 x 3" screws
HARDY
FRAME
PANEL
WITH•Installing at raised floor head-out
*custom
heights
available
4X FILLER
- Provides allowable values from
Table 1.1A.
Alternate
-Provides a direct shear transfer to the
foundation.
-Requires less material by eliminating
rim, Bearing Plate and bottom screw
•Because Brace Frames are wider,
overturning forces cause less
compression on wood below.
Hardy Frame® Panel
Hardy Frame® Panel
•Unlike Panels, Brace Frames install on
on raised floor
at raised floor
1/4 x 4 1/2" screws
head out
the bottom plate above floor systems.
HARDY FRAME PANEL BOTTOM
ON RAISED FLOOR
Hardy Frame® Bearing Plates are not
HARDY FRAME PANEL BOTTOM
ON RAISED FLOOR ON CONCRETEnecessary.
®
®
®
®
Hardy Frame®
Brace Frame
at top plates
1/4 x 3" screws
®
HARDY FRAME BRACE FRAME
TOP WITH TOP PLATE
Hardy Frame®
Brace Frame
with 4x filler
1/4 x 3" screws
*custom heights available
®
HARDY FRAME BRACE FRAME
4X FILLER
Alternate
Hardy Frame®
Brace Frame
on raised floor
1/4 x 4 1/2" screws
®
HARDY FRAME BRACE FRAME
BOTTOM ON RAISED FLOOR
26
Hardy Frame®
Brace Frame
at raised floor
head out
®
HARDY FRAME BRACE FRAME
BOTTOM ON RAISED FLOOR
HEAD OUT
HARDY
™
FRAME
Table 1.2A Hardy Frame® Installation - on Raised Floors1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-12x78
78
1 1/8" STD
HFX-15x78
78
1 1/8" STD
HFX-18x78
78
1 1/8" STD
HFX-21x78
78
1 1/8" STD
1 1/8" STD
HFX-24x78
78
1 1/8"HS
HFX-12x8
92 1/4
1 1/8" STD
HFX-15x8
92 1/4
1 1/8" STD
HFX-18x8
92 1/4
1 1/8" STD
HFX-21x8
92 1/4
1 1/8" STD
1 1/8" STD
HFX-24x8
92 1/4
1 1/8" HS
HFX-32x8
92 1/4
HFX-44x8
92 1/4
7/8" STD
7/8" STD
7/8" HS
HFX-12x9
104 1/4
1 1/8" STD
HFX-15x9
104 1/4
1 1/8" STD
HFX-18x9
104 1/4
1 1/8" STD
HFX-21x9
104 1/4
1 1/8" STD
1 1/8" STD
HFX-24x9
104 1/4
1 1/8" HS
HFX-32x9
104 1/4
HFX-44x9
104 1/4
7/8" STD
7/8" STD
7/8"HS
HFX-12x10
116 1/4
1 1/8" STD
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,380
1,350
1,310
1,780
1,750
1,715
2,875
2,780
2,285
3,635
3,525
2,775
3,830
3,270
5,070
4,385
3,270
1,180
1,155
1,120
1,475
1,450
1,420
2,450
2,370
1,930
3,025
2,930
2,350
3,420
2,765
4,315
3,710
2,765
2,135
1,470
675
2,950
2,245
1,085
3,215
2,245
1,085
1,050
1,030
1,000
1,285
1,260
1,235
2,175
2,100
1,710
2,640
2,565
2,080
3,140
2,450
3,835
3,285
2,450
1,890
1,300
595
2,745
1,990
960
2,845
1,990
960
950
925
900
Drift at
V 5 (lbs)
0.341
0.341
0.341
0.279
0.341
0.265
0.236
0.243
0.210
0.341
0.293
0.211
0.404
0.404
0.404
0.326
0.404
0.320
0.292
0.307
0.246
0.404
0.344
0.247
0.310
0.229
0.139
0.269
0.188
0.118
0.263
0.188
0.118
0.456
0.456
0.456
0.367
0.456
0.367
0.346
0.362
0.277
0.456
0.386
0.278
0.365
0.269
0.162
0.312
0.219
0.136
0.308
0.220
0.136
0.509
Wind
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
12,165
10,625
8,775
12,545
10,965
9,070
15,935
14,055
9,610
16,520
14,690
9,610
14,700
13,395
9,610
19,620
15,610
9,610
12,305
10,760
8,910
12,260
10,685
8,795
16,055
14,170
9,610
16,245
14,425
9,610
15,555
14,250
9,610
19,770
15,610
9,610
8,040
5,540
2,540
7,610
5,795
2,795
8,295
5,795
2,795
12,395
10,850
8,995
12,050
10,480
8,595
16,100
14,215
9,610
16,040
14,230
9,610
16,160
14,850
9,610
19,855
15,610
9,610
8,040
5,540
2,540
8,005
5,795
2,795
8,295
5,795
2,795
12,475
10,925
9,070
1,755
1,685
1,400
2,245
2,175
1,790
3,430
3,050
2,285
4,355
3,720
2,775
5,105
4,385
3,270
5,315
4,385
3,270
1,490
1,435
1,185
1,870
1,810
1,510
2,920
2,580
1,930
3,625
3,145
2,350
4,495
3,710
2,765
4,495
3,710
2,765
2,135
1,470
675
3,215
2,245
1,085
3,215
2,245
1,085
1,325
1,275
1,050
1,635
1,585
1,340
2,590
2,285
1,710
3,170
2,785
2,080
3,980
3,285
2,450
3,980
3,285
2,450
1,890
1,300
595
2,845
1,990
960
2,845
1,990
960
1,195
1,150
940
Drift at
V 5 (lbs)
0.433
0.363
0.433
0.354
0.433
0.386
0.278
0.433
0.366
0.265
0.343
0.292
0.210
0.363
0.293
0.211
0.512
0.426
0.512
0.428
0.512
0.453
0.326
0.512
0.442
0.320
0.425
0.343
0.247
0.426
0.344
0.248
0.310
0.229
0.139
0.264
0.188
0.118
0.263
0.188
0.118
0.579
0.478
0.579
0.491
0.579
0.510
0.367
0.579
0.508
0.367
0.477
0.385
0.277
0.478
0.386
0.278
0.365
0.269
0.162
0.308
0.220
0.136
0.308
0.220
0.136
0.646
0.530
Uplift at
V 5,6 (lbs)
15,585
13,720
9,610
15,945
14,065
9,610
19,100
15,610
9,610
19,915
15,610
9,610
19,770
15,610
9,610
20,610
15,610
9,610
15,690
13,820
9,610
15,690
13,815
9,610
19,230
15,610
9,610
19,585
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
8,295
5,795
2,795
15,770
13,900
9,610
15,500
13,635
9,610
19,285
15,610
9,610
19,340
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
8,295
5,795
2,795
15,835
13,965
9,610
27
HARDY
™
FRAME
Table 1.2A Hardy Frame® Installation - on Raised Floors1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-15x10
116 1/4
1 1/8" STD
HFX-18x10
116 1/4
1 1/8" STD
HFX-21x10
116 1/4
1 1/8" STD
1 1/8" STD
HFX-24x10
116 1/4
1 1/8" HS
HFX-32x10
116 1/4
7/8" STD
HFX-44x10
116 1/4
7/8" STD
HFX-15x11
128 1/4
1 1/8" STD
HFX-18x11
128 1/4
1 1/8" STD
HFX-21x11
128 1/4
1 1/8" STD
1 1/8" STD
HFX-24x11
128 1/4
1 1/8" HS
HFX-32x11
128 1/4
7/8" STD
HFX-44x11
128 1/4
7/8" STD
HFX-15x12
140 1/4
1 1/8" STD
HFX-18x12
140 1/4
1 1/8" STD
HFX-21x12
140 1/4
1 1/8" STD
HFX-24x12
140 1/4
1 1/8" STD
1 1/8" HS
28
HFX-32x12
140 1/4
7/8" STD
HFX-44x12
140 1/4
7/8" STD
HFX-15x13
152 1/4
1 1/8" STD
HFX-18x13
152 1/4
1 1/8" STD
1 1/8" STD
HFX-21x13
152 1/4
1 1/8" HS
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,135
1,115
1,090
1,960
1,895
1,530
2,345
2,275
1,865
2,900
2,195
3,450
2,945
2,195
1,695
1,170
535
2,550
1,785
860
1,015
1,000
975
1,780
1,720
1,390
2,105
2,040
1,690
2,695
2,670
1,990
3,150
2,670
1,990
1,535
1,060
485
2,315
1,615
780
915
900
880
1,635
1,580
1,270
1,830
1,790
1,545
2,515
2,440
1,820
2,890
2,440
1,820
1,405
970
445
2,115
1,480
715
835
820
805
1,510
1,460
1,170
1,670
1,640
1,425
1,730
1,680
1,425
Drift at
V 5 (lbs)
0.509
0.509
0.407
0.509
0.416
0.400
0.418
0.307
0.509
0.429
0.309
0.425
0.312
0.186
0.356
0.254
0.156
0.561
0.561
0.447
0.561
0.465
0.455
0.469
0.337
0.561
0.468
0.337
0.488
0.358
0.211
0.407
0.290
0.177
0.614
0.614
0.487
0.614
0.536
0.509
0.510
0.367
0.614
0.510
0.367
0.556
0.406
0.238
0.459
0.327
0.199
0.666
0.666
0.525
0.666
0.586
0.666
0.567
Wind
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
11,865
10,295
8,415
16,190
14,300
9,610
15,860
14,050
9,610
16,655
15,350
9,610
19,910
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
11,720
10,155
8,275
16,240
14,345
9,610
15,695
13,890
9,610
17,090
15,610
9,610
20,070
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
11,565
10,005
8,130
16,295
14,400
9,610
14,900
13,270
9,610
17,450
15,610
9,610
20,130
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
11,425
9,865
7,995
16,360
14,465
9,610
14,765
13,170
9,610
15,305
13,555
9,610
1,445
1,405
1,200
2,335
2,050
1,530
2,810
2,495
1,865
3,565
2,945
2,195
3,565
2,945
2,195
1,695
1,170
535
2,550
1,785
860
1,295
1,260
1,090
2,115
1,855
1,390
2,520
2,260
1,690
3,235
2,670
1,990
3,235
2,670
1,990
1,535
1,060
485
2,315
1,615
780
1,170
1,140
995
1,945
1,695
1,270
2,215
2,070
1,545
2,955
2,440
1,820
2,955
2,440
1,820
1,405
970
445
2,115
1,480
715
1,065
1,045
915
1,800
1,565
1,170
2,025
1,905
1,425
2,080
1,905
1,425
Drift at
V 5 (lbs)
0.646
0.556
0.646
0.565
0.407
0.646
0.574
0.416
0.529
0.427
0.307
0.531
0.429
0.308
0.425
0.312
0.186
0.356
0.254
0.156
0.712
0.621
0.712
0.623
0.449
0.712
0.642
0.465
0.580
0.468
0.337
0.581
0.469
0.337
0.488
0.358
0.212
0.406
0.289
0.177
0.779
0.687
0.779
0.676
0.487
0.779
0.738
0.536
0.633
0.511
0.367
0.633
0.511
0.367
0.556
0.407
0.238
0.459
0.327
0.199
0.846
0.754
0.846
0.730
0.525
0.846
0.808
0.586
0.846
0.783
0.567
Uplift at
V 5,6 (lbs)
15,280
13,470
9,610
19,380
15,610
9,610
19,125
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
15,065
13,320
9,610
19,375
15,610
9,610
18,925
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
14,870
13,185
9,610
19,505
15,610
9,610
18,155
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
14,695
13,060
9,610
19,580
15,610
9,610
18,030
15,610
9,610
18,510
15,610
9,610
crete Table 1.1A
HFX/S Tab
HARDY
™
FRAME
Model Number
Table 1.2A Hardy Frame® Installation - on Raised Floors1,2
®
Seismic
Net Height
H (in)
1 1/8" STD
HFX-24x13
152 1/4
1 1/8" HS
HFX-32x13
152 1/4
7/8" STD
HFX-44x13
152 1/4
7/8" STD
NDATION PLAN
1.2
HD Bolt Dia (in)
and Grade 3
Wind
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
2,360
2,250
1,675
2,670
2,250
1,675
1,295
890
410
1,950
1,360
655
0.566
0.553
0.397
0.666
0.552
0.397
0.626
0.457
0.266
0.516
0.367
0.221
17,785
15,610
9,610
20,180
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
2,725
2,250
1,675
2,725
2,250
1,675
1,295
890
410
1,950
1,360
655
0.684
0.552
0.397
0.684
0.552
0.397
0.626
0.457
0.266
0.516
0.367
0.221
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
FOUNDATIO
For SI: 1 inch = 25.4 mm, 1 lbf = 4.45 N
Notes
1) The values in this table are Allowable Stress Design (ASD) excluding a 1.33 stress increase and pertain to installation on Raised Floor Systems supported on concrete or masonry foundations.
2) Raised Floor System for Panels assumes a 2x wood sill plate, EWP rim board (Fc ^= 680 psi, 12 inch depth)with a Hardy Frame Bearing Plate installed be
low. For EWP rim boards up to 18 inches deep the allowable shear value must be multiplied by 0.96 for 12 inch Panel widths and by 0.98 for 18 and 24 inch widths. For all Panel widths the corresponding drift does not change. Raised Floor System for Brace Frames assume a 2x wood sill plate, EWP rim board (Fc^ = 680 psi,12 inch deep), floor sheathing and a 2x wood bottom plate (Fc^ =625 psi) below. For EWP rim boards up to 18 inches deep the allowable shear value does not change and the corresponding drift must be multiplied by 1.03.
3) STD indicates bolts complying with ASTM F1554 Grade 36. HS rods include, but are not limited to ASTM F1554 Grade 105, ASTM A193 Grade B7 or
ASTM A354 Grade BD.
4) The applied vertical axial loads are concurrent with the allowable shear load. For Panels the axial load must be applied within the middle 1/3 of the Panel width or be uniformly distributed across the entire Panel width. For Brace Frame the axial load is acting along the centerline of the post.
5) Allowable Shear, Drift @ V and Uplift @ V values may be linearly interpolated for intermediate height or axial loads.
6) The Uplift values listed assume no resisting axial load. To determine the anchor tension load in Panels at design shear values and including the effect of axial loads, the tension load equals uplift minus P/2, where P is the axial load on the Panel. For Brace Frames the anchor tension load equals uplift minus P where P is the axial load on the Post.
On Raised Floor Table 1.2A
FOUNDATION PLAN
N
On Up
2nd
For referenced details see catalog pages 50-55
ANCHORAGE NOMENCLATURE
UNREINFORCED
1 1/8-STD-14-20
Ca 1, 2
le
ROD GRADE
ROD DIAMETER
ANCHORAGE NOMENCLATURE
REINFORCED
1 1/8-STD-RA
REINFORCED ANCHORAGE
ROD GRADE
ROD DIAMETER
29
HARDY
™
FRAME
On Upper Floor Systems
®
Hardy Frame® Panel
Hardy Frame® Panel
Hardy Frame® Panel
straight stack installation
stagger-stack installation
with 2x filler
HARDY FRAME PANEL BOTTOM
with
Stacking Panel (STK)
with Stacking Panel
1/4 x 4PANEL
1/2" screws
HARDY FRAME
WITH 2X FILLER
ON MULTI STORY
below (check cumulative HARDY FRAME
(STK)PANEL
below BOTTOM
forces-see example 2)
STAGGER STACK
®
®
®
Hardy Frame® Panel
to two Hardy Frame®
Posts below
®
HARDY FRAME PANEL BOTTOM
2 POSTS
Hardy Frame® "STK Washers" are required in the top of Panels when connecting to a hold down rod
from above. Hardy Frame® "STK Panels" include STK Washers pre-welded in the top channel.
•Allowable values in Table 1.3A have been adjusted to maintain code drift limit while including
the effects of crushing in wood members below.
MODEL NUMBER
•For “straight stack” installations, cumulative forces must be considered by the building design
HFX-18 x 9 - STK
STACKING
professional.
NOMINAL HEIGHT
•For discontinuous systems, amplification factors must be considered by the Building Design
ACTUAL WIDTH
PRODUCT SERIES
Professional.
•Table values for Panels installed on a wood floor system assume installation of a Hardy Frame® Bearing Plate.
•For installations on beams, size plate washers on underside of wood beam to prevent crushing
and include deflection from the overturning couple in the drift procedure.
•Because Brace Frames are wider, overturning forces cause less compression on wood below
and shrinkage has less effect on horizontal drift.
•Unlike Panels, Brace Frames install on the bottom plate above floor systems. Hardy Frame®
Bearing Plates are not necessary.
30
Hardy Frame®
Brace Frame
at top plates
®
Hardy Frame®
Brace Frame
straight stack installation
(check cumulative forces)
HARDY FRAME BRACE FRAME
®
TOP WITH TOP PLATE
HARDY FRAME BRACE FRAME
BOTTOM ON MULTI STORY
Hardy Frame®
Brace Frame
HARDY FRAMEinstallation
BRACE FRAME
stagger-stack
®
BOTTOM STAGGER
Hardy Frame®
Brace Frame
® FRAME
BRACE
to twoHARDY
HardyFRAME
Frame
BOTTOM 2 POSTS
Posts
below
®
HARDY
™
FRAME
Table 1.3A Hardy Frame® Installation - on Upper Floors1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-12x78
78
1 1/8” STD
HFX-15x78
78
1 1/8” STD
HFX-18x78
78
1 1/8” STD
HFX-21x78
78
1 1/8” STD
1 1/8” STD
HFX-24x78
78
1 1/8” HS
HFX-12x8
92 1/4
1 1/8” STD
HFX-15x8
92 1/4
1 1/8” STD
HFX-18x8
92 1/4
1 1/8” STD
HFX-21x8
92 1/4
1 1/8” STD
1 1/8” STD
HFX-24x8
92 1/4
1 1/8” HS
HFX-32x8
92 1/4
7/8” STD
7/8” STD
HFX-44x8
92 1/4
7/8” HS
HFX-12x9
HFX-15x9
104 1/4
104 1/4
1 1/8” STD
1 1/8” STD
HFX-18x9
104 1/4
1 1/8” STD
HFX-21x9
104 1/4
1 1/8” STD
1 1/8” STD
HFX-24x9
104 1/4
1 1/8” HS
HFX-32x9
104 1/4
7/8” STD
HFX-44x9
104 1/4
7/8” STD
HFX-12x10
116 1/4
1 1/8” STD
HFX-15x10
116 1/4
1 1/8” STD
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,245
1,210
1,165
1,640
1,600
1,555
2,665
2,600
2,285
3,415
3,305
2,775
3,830
3,270
4,765
4,385
3,270
1,065
1,035
995
1,355
1,325
1,290
2,275
2,215
1,930
2,845
2,760
2,350
3,420
2,765
4,060
3,710
2,765
2,135
1,470
675
2,950
2,245
1,085
3,215
2,245
1,085
950
920
885
1,185
1,155
1,125
2,020
1,965
1,710
2,480
2,415
2,080
3,140
2,450
3,605
3,285
2,450
1,890
1,300
595
2,845
1,990
960
855
830
800
1,045
1,025
995
Drift at
V 5 (lbs)
0.341
0.341
0.341
0.307
0.341
0.290
0.257
0.265
0.231
0.341
0.319
0.232
0.404
0.404
0.404
0.360
0.404
0.348
0.319
0.335
0.271
0.404
0.374
0.272
0.321
0.238
0.145
0.277
0.195
0.122
0.272
0.195
0.122
0.456
0.456
0.456
0.405
0.456
0.399
0.378
0.395
0.305
0.456
0.421
0.306
0.378
0.279
0.168
0.321
0.227
0.141
0.509
0.509
Wind
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
10,930
9,340
7,425
11,485
9,860
7,905
14,715
13,035
9,610
15,500
13,660
9,610
14,700
13,395
9,610
18,420
15,610
9,610
11,060
9,460
7,545
11,245
9,620
7,680
14,875
13,145
9,610
15,260
13,480
9,610
15,555
14,250
9,610
18,555
15,610
9,610
8,040
5,540
2,540
7,610
5,795
2,795
8,295
5,795
2,795
11,135
9,535
7,615
11,065
9,450
7,510
14,930
13,185
9,610
15,015
13,305
9,610
16,160
14,850
9,610
18,625
15,610
9,610
8,040
5,540
2,540
8,005
5,795
2,795
11,195
9,595
7,675
10,910
9,295
7,360
1,590
1,550
1,400
2,090
2,040
1,790
3,225
3,050
2,285
4,115
3,720
2,775
5,105
4,385
3,270
5,315
4,385
3,270
1,355
1,325
1,185
1,730
1,700
1,510
2,740
2,580
1,930
3,425
3,145
2,350
4,495
3,710
2,765
4,495
3,710
2,765
2,135
1,470
675
3,215
2,245
1,085
3,215
2,245
1,085
1,205
1,180
1,050
1,510
1,480
1,340
2,430
2,285
1,710
2,995
2,785
2,080
3,980
3,285
2,450
3,980
3,285
2,450
1,890
1,300
595
2,845
1,990
960
1,090
1,065
940
1,335
1,310
1,200
Drift at
V 5 (lbs)
0.433
0.405
0.433
0.388
0.433
0.421
0.306
0.433
0.396
0.289
0.371
0.318
0.231
0.392
0.319
0.232
0.512
0.475
0.512
0.468
0.512
0.493
0.360
0.512
0.477
0.348
0.460
0.373
0.272
0.461
0.374
0.272
0.321
0.237
0.145
0.272
0.195
0.122
0.272
0.195
0.122
0.579
0.533
0.579
0.537
0.579
0.556
0.405
0.579
0.547
0.399
0.517
0.420
0.305
0.518
0.421
0.306
0.378
0.279
0.168
0.318
0.227
0.141
0.646
0.592
0.646
0.606
Uplift at
V 5,6 (lbs)
14,075
12,485
9,610
14,800
13,085
9,610
17,920
15,610
9,610
18,770
15,610
9,610
19,770
15,610
9,610
20,610
15,610
9,610
14,205
12,610
9,610
14,490
12,865
9,610
18,030
15,610
9,610
18,475
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
8,295
5,795
2,795
14,305
12,705
9,610
14,265
12,650
9,610
18,080
15,610
9,610
18,260
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
14,390
12,790
9,610
14,065
12,450
9,610
31
HARDY
™
FRAME
Table 1.3A Hardy Frame® Installation - on Upper Floors1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
HFX-18x10
116 1/4
1 1/8” STD
HFX-21x10
116 1/4
1 1/8” STD
1 1/8” STD
HFX-24x10
116 1/4
1 1/8” HS
HFX-32x10
116 1/4
7/8” STD
HFX-44x10
116 1/4
7/8” STD
HFX-15x11
128 1/4
1 1/8” STD
HFX-18x11
128 1/4
1 1/8” STD
HFX-21x11
128 1/4
1 1/8” STD
HFX-24x11
128 1/4
1 1/8” STD
1 1/8” HS
HFX-32x11
128 1/4
7/8” STD
HFX-44x11
128 1/4
7/8” STD
HFX-15x12
140 1/4
1 1/8” STD
HFX-18x12
140 1/4
1 1/8” STD
HFX-21x12
140 1/4
1 1/8” STD
HFX-24x12
140 1/4
1 1/8” STD
1 1/8” HS
32
HFX-32x12
140 1/4
7/8” STD
HFX-44x12
140 1/4
7/8” STD
HFX-15x13
152 1/4
1 1/8” STD
HFX-18x13
152 1/4
1 1/8” STD
HFX-21x13
152 1/4
1 1/8” STD
HFX-24x13
152 1/4
1 1/8” STD
1 1/8” HS
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,825
1,770
1,530
2,190
2,145
1,865
2,900
2,195
3,240
2,945
2,195
1,695
1,170
535
2,550
1,785
860
940
915
890
1,660
1,610
1,390
1,960
1,925
1,690
2,695
2,670
1,990
2,960
2,670
1,990
1,535
1,060
485
2,315
1,615
780
850
830
805
1,525
1,480
1,270
1,705
1,675
1,545
2,515
2,440
1,820
2,715
2,440
1,820
1,405
970
445
2,115
1,480
715
775
755
735
1,410
1,365
1,170
1,555
1,530
1,425
2,360
2,250
1,675
2,505
2,250
1,675
Drift at
V 5 (lbs)
0.509
0.449
0.509
0.451
0.436
0.456
0.338
0.509
0.467
0.340
0.439
0.323
0.193
0.367
0.262
0.162
0.561
0.561
0.493
0.561
0.504
0.496
0.511
0.372
0.561
0.511
0.371
0.503
0.370
0.219
0.419
0.299
0.183
0.614
0.613
0.614
0.537
0.614
0.579
0.554
0.556
0.404
0.614
0.557
0.405
0.572
0.419
0.247
0.472
0.337
0.205
0.666
0.666
0.580
0.666
0.633
0.616
0.603
0.438
0.666
0.602
0.438
Wind
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
15,040
13,255
9,610
14,795
13,145
9,610
16,655
15,350
9,610
18,680
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
10,785
9,175
7,240
15,100
13,300
9,610
14,600
13,005
9,610
17,090
15,610
9,610
18,815
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
10,655
9,045
7,115
15,165
13,350
9,610
13,845
12,290
9,610
17,450
15,610
9,610
18,870
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
10,535
8,930
7,000
15,250
13,400
9,610
13,725
12,175
9,610
17,785
15,610
9,610
18,915
15,610
9,610
2,190
2,050
1,530
2,660
2,495
1,865
3,565
2,945
2,195
3,565
2,945
2,195
1,695
1,170
535
2,550
1,785
860
1,195
1,175
1,090
1,985
1,855
1,390
2,385
2,260
1,690
3,235
2,670
1,990
3,235
2,670
1,990
1,535
1,060
485
2,315
1,615
780
1,080
1,060
995
1,825
1,695
1,270
2,100
2,045
1,545
2,955
2,440
1,820
2,955
2,440
1,820
1,405
970
445
2,115
1,480
715
985
965
915
1,690
1,565
1,170
1,925
1,870
1,425
2,725
2,250
1,675
2,725
2,250
1,675
0.646
0.616
0.449
0.646
0.618
0.451
0.573
0.465
0.338
0.575
0.467
0.340
0.439
0.323
0.193
0.366
0.262
0.162
18,165
15,610
9,610
18,065
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
13,885
12,270
9,610
18,160
15,610
9,610
17,885
15,610
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
13,720
12,110
9,610
18,275
15,610
9,610
17,195
15,390
9,610
20,610
15,610
9,610
20,610
15,610
9,610
8,040
5,540
2,540
8,295
5,795
2,795
13,565
11,960
9,610
18,340
15,610
9,610
17,080
15,280
9,610
20,610
15,610
9,610
20,610
15,610
9,610
0.712
0.677
0.712
0.680
0.495
0.712
0.690
0.504
0.629
0.510
0.371
0.630
0.511
0.372
0.504
0.370
0.219
0.418
0.298
0.183
0.779
0.748
0.779
0.738
0.537
0.779
0.579
0.686
0.557
0.405
0.686
0.557
0.405
0.573
0.420
0.247
0.472
0.337
0.205
0.846
0.821
0.846
0.797
0.580
0.846
0.633
0.742
0.602
0.438
0.742
0.603
0.438
HARDY
™
FRAME
Table 1.3A Hardy Frame® Installation - on Upper Floors1,2
®
Seismic
Net Height
H (in)
Model Number
HFX-32x13
HD Bolt Dia (in)
and Grade 3
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,295
890
410
1,950
1,360
655
0.645
0.471
0.275
0.530
0.378
0.228
8,040
5,540
2,540
8,295
5,795
2,795
1,295
890
410
1,950
1,360
655
0.645
0.471
0.275
0.530
0.378
0.229
8,040
5,540
2,540
8,295
5,795
2,795
FOUNDATION PLAN
HFX-44x13
152 1/4
7/8” STD
152 1/4
7/8” STD
Wind
Applied Axial
Load 4
For
SI: 1 inch = 25.4 mm, 1 lbf = 4.45 N
Notes
1) The values in this table are Allowable Stress Design (ASD) excluding a 1.33 stress increase and pertain to installation on Upper Floor Systems that bear on wood frame walls below.
2) Upper Floor System for Panels assumes double 2x wood sill plates in the wall below, EWP rim board (Fc^ = 680 psi, 12 inch depth) with a Hardy Frame®
Bearing Plate installed below. For EWP rim boards up to 18 inches deep the allowable shear value and the corresponding drift do not change. Upper Floor System for Brace Frames assumes double 2x wood plates in the wall below, EWP rim board (Fc^ = 680 psi 12 inch deep), floor sheathing and a 2x wood bottom plate (Fc^= 625 psi) below. For EWP rim boards up to 18 inch deep the allowable shear value does not change and the corresponding drift must be multiplied by 1.03.
3) STD indicates bolts complying with ASTM F1554 Grade 36. HS rods include, but are not limited to ASTM F1554 Grade 105, ASTM A193 Grade B7 or
ASTM A354 Grade BD.
4) The applied vertical axial loads are concurrent with the allowable shear load. For Panels the axial load must be applied within the middle 1/3 of the Panel width or be uniformly distributed across the entire Panel width. For Brace Frame the axial load is acting along the centerline of the post. 5) Allowable Shear, Drift @ V and Uplift @ V values may be linearly interpolated for intermediate height or axial loads. 6) The Uplift values listed assume no resisting axial load. To determine the anchor tension load in Panels at design shear values and including the effect of axial loads, the tension load equals uplift minus P/2, where P is the axial load on the Panel. For Brace Frames the anchor tension load equals uplift minus P where P is the axial load on the Post.
On Upper Floors Table 1.3A
2nd STORY FRAMING PLAN
For referenced details see catalog pages 52-55
HFTC15-24 STD
ROD GRADE
15 in. THROUGH 24 in. PANEL WIDTHS
HARDY FRAME TENSION CONNECTORS
33
HARDY
™
FRAME
HFX/S Series for cold formed steel (c-fs) framing
®
®
®
HARDY FRAME PANEL
BOTTOM
® Panel
FRAME
PANEL
BOTTOM
Hardy Frame® Panel HARDY
Hardy
Frame
ON CONCRETE
ON DOUBLE
NUT washers
on concrete
on nuts and
®
HARDY FRAME PANEL AT C-fS PORTAL
(Requires 5,000 psi
Hardy Frame® Panel
Hardy Frame® Panel
with c-fs
Channel
at c-fs Portal
HARDY FRAME
PANEL
WITH CFS CHANNEL
®
grout)
•HFX/S Series products are manufactured to cold formed steel stud heights. Nominal 8’ heights are
96 5/8" net, nominal 9' is 108 5/8", etc.
•Installation can be directly on concrete (moisture barrier recommended), with a c-fs channel below,
or a nut and washer for eveling or height adjustment up to ± 1/2"
•Top connections are made with 1/4" diameter self tapping screws after installing floor or roof
members above.
•Panels and Brace Frames are 3 1/2" net depth.
The new HFX-Series Brace Frame has relocated hold down bolts to be outside of the post. Hold down
connections are now accessible even when wood or framing is in contact with the edge of the frame.
Hardy Frame®
Brace BRACE
FrameFRAME
HARDY FRAME
TOP with
WITH C-FS
c-fsCHANNEL
Channel
®
Hardy Frame®
Brace Frame
on concrete
®
34
HARDY FRAME BRACE FRAME
BOTTOM ON CONCRETE
Hardy Frame®
Brace Frame
at c-fs Portal
®
HARDY FRAME BRACE FRAME
C-fS PORTAL
Hardy Frame®
Brace Frame
on nuts and washers
®
HARDY FRAME BRACE FRAME
BOTTOM ON DOUBLE NUT
Hardy Frame®
Brace Frame
at c-fs Portal
®
HARDY FRAME BRACE FRAME
C-fS PORTAL
Hardy Frame®
Brace Frame
at raised floor
head out
®
HARDY FRAME BRACE FRAME
BOTTOM ON RAISED FLOOR
HEAD OUT
HARDY
™
FRAME
Table 2.1A Hardy Frame® HFX/S Installation - on 2500 psi Concrete1,2
®
Seismic
Wind
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
HFX/S-9x8
96 5/8
1 1/8” STD
2,000
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
770
1,410
1,300
1,160
1,410
1,300
1,160
1,955
1,945
1,900
2,305
2,160
1,955
0.258
0.213
0.197
0.176
0.214
0.198
0.177
0.330
0.327
0.320
0.388
0.364
0.330
15,510
19,595
17,005
14,320
19,595
17,005
14,320
21,615
21,380
20,560
31,340
26,150
21,625
770
1,410
1,300
1,160
1,410
1,300
1,160
1,955
1,945
1,900
2,305
2,160
1,955
0.258
0.213
0.197
0.176
0.214
0.198
0.177
0.327
0.325
0.318
0.388
0.364
0.330
15,510
19,595
17,005
14,320
19,595
17,005
14,320
21,615
21,380
20,560
31,340
26,150
21,625
2,625
0.218
21,615
2,625
0.218
21,615
3,570
3,385
3,135
0.298
0.283
0.262
39,500
33,700
28,745
3,570
3,385
3,135
0.299
0.284
0.263
39,500
33,700
28,745
3,210
0.272
21,090
3,210
0.272
21,090
4,970
4,875
4,595
0.423
0.415
0.391
43,265
41,070
36,045
5,030
4,875
4,595
0.428
0.415
0.391
44,825
41,070
36,045
3,420
0.151
18,010
3,730
0.165
20,005
5,910
0.263
38,175
2,265
2,160
1,360
3,000
2,335
1,540
0.133
0.126
0.080
0.176
0.137
0.090
8,540
8,130
5,130
11,295
8,795
5,795
2,815
0.090
7,270
2,080
4,510
3,545
2,380
1,255
1,155
1,035
1,255
1,155
1,035
1,740
1,730
1,690
2,050
1,920
1,740
0.066
0.144
0.113
0.076
0.238
0.220
0.196
0.240
0.221
0.198
0.381
0.378
0.370
0.449
0.421
0.381
5,365
11,645
9,145
6,145
19,595
17,005
14,325
19,595
17,005
14,325
21,615
21,380
20,560
31,340
26,150
21,625
6,450
6,360
6,210
2,825
2,160
1,360
3,000
2,335
1,540
3,660
3,240
2,080
4,510
3,545
2,380
1,255
1,155
1,035
1,255
1,155
1,035
1,740
1,730
1,690
2,050
1,920
1,740
0.288
0.284
0.277
0.165
0.126
0.080
0.176
0.137
0.090
0.117
0.103
0.066
0.144
0.113
0.076
0.238
0.220
0.196
0.240
0.221
0.197
0.379
0.376
0.367
0.449
0.421
0.381
45,290
43,925
41,850
10,630
8,130
5,130
11,295
8,795
5,795
9,440
8,365
5,365
11,645
9,145
6,145
19,595
17,005
14,325
19,595
17,005
14,325
21,615
21,380
20,560
31,340
26,150
21,625
2,335
0.246
21,615
2,335
0.246
21,615
3,175
3,015
2,790
2,925
2,915
2,905
0.335
0.318
0.295
0.319
0.318
0.317
39,500
33,700
28,745
21,545
21,435
21,345
4,305
0.475
40,285
4,085
0.451
36,045
3,175
3,015
2,790
2,925
2,915
2,905
4,475
4,340
4,085
0.336
0.318
0.295
0.319
0.318
0.317
0.494
0.479
0.451
39,500
33,700
28,745
21,545
21,435
21,345
44,825
41,070
36,045
3,140
0.175
18,710
3,385
0.191
20,745
5,230
0.294
37,830
5,775
5,675
5,525
0.325
0.319
0.311
45,935
44,165
41,850
1 1/8” STD
HFX/S-12x8
96 5/8
1 1/8” HS
1 1/8” STD
HFX/S-15x8
96 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x8
96 5/8
1 1/8” HS
1 1/8” STD
HFX/S-21x8
96 5/8
1 1/8” HS
1 1/8” STD
HFX/S-24x8
96 5/8
1 1/8” HS
7/8” STD
HFX/S-32x8
96 5/8
7/8” HS
7/8” STD
HFX/S-44x8
96 5/8
7/8” HS
1 1/8” STD
HFX/S-12x9
108 5/8
1 1/8” HS
1 1/8” STD
HFX/S-15x9
108 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x9
108 5/8
1 1/8” HS
1 1/8” STD
HFX/S-21x9
108 5/8
1 1/8” HS
1 1/8” STD
HFX/S-24x9
108 5/8
1 1/8” HS
35
HARDY
™
FRAME
Table 2.1A Hardy Frame® HFX/S Installation - on 2500 psi Concrete1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
7/8” STD
HFX/S-32x9
108 5/8
7/8” HS
7/8” STD
HFX/S-44x9
108 5/8
7/8” HS
1 1/8” STD
HFX/S-12x10
120 5/8
1 1/8” HS
1 1/8” STD
HFX/S-15x10
120 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x10
120 5/8
1 1/8” HS
1 1/8” STD
HFX/S-21x10
120 5/8
1 1/8” HS
1 1/8” STD
HFX/S-24x10
120 5/8
1 1/8” HS
7/8” STD
HFX/S-32x10
120 5/8
7/8” HS
7/8” STD
HFX/S-44x10
120 5/8
7/8” HS
1 1/8” STD
HFX/S-15x11
132 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x11
132 5/8
1 1/8” HS
36
1 1/8” STD
HFX/S-21x11
132 5/8
1 1/8” HS
Wind
Applied Axial
Load 4
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
2,100
1,910
1,205
2,655
2,065
1,360
0.174
0.158
0.100
0.220
0.171
0.113
8,945
8,130
5,130
11,295
8,795
5,795
2,635
0.116
7,680
1,840
3,995
3,135
2,105
1,130
1,040
930
1,130
1,040
930
1,565
1,555
1,520
1,845
1,730
1,565
0.081
0.177
0.139
0.093
0.263
0.243
0.217
0.265
0.244
0.218
0.434
0.431
0.421
0.511
0.479
0.434
5,365
11,645
9,145
6,145
19,595
17,005
14,325
19,595
17,005
14,325
21,620
21,380
20,560
31,340
26,150
21,625
2,500
1,910
1,205
2,655
2,065
1,360
3,405
2,870
1,840
3,995
3,135
2,105
1,130
1,040
930
1,130
1,040
930
1,565
1,555
1,520
1,845
1,730
1,565
0.207
0.158
0.100
0.220
0.171
0.113
0.151
0.127
0.081
0.177
0.139
0.093
0.263
0.243
0.217
0.265
0.244
0.218
0.431
0.428
0.418
0.511
0.479
0.434
10,630
8,130
5,130
11,295
8,795
5,795
9,930
8,365
5,365
11,645
9,145
6,145
19,595
17,005
14,325
19,595
17,005
14,325
21,620
21,380
20,560
31,340
26,150
21,625
2,105
0.272
21,615
2,105
0.272
21,615
2,860
2,715
2,515
0.372
0.353
0.327
39,500
33,700
28,745
2,860
2,715
2,515
0.372
0.353
0.327
39,500
33,700
28,745
2,640
0.364
21,620
2,640
0.364
21,620
3,780
0.528
38,105
3,680
0.514
36,045
2,900
0.199
19,290
4,690
0.325
37,530
1,955
1,715
1,080
2,380
1,855
1,220
0.222
0.194
0.122
0.270
0.210
0.138
9,285
8,130
5,130
11,295
8,795
5,795
2,475
0.148
8,055
1,650
3,580
2,810
1,890
1,425
1,415
1,385
1,680
1,575
1,425
0.099
0.214
0.168
0.113
0.486
0.483
0.471
0.573
0.536
0.486
5,365
11,645
9,145
6,145
21,615
21,380
20,560
31,340
26,150
21,625
4,030
3,905
3,680
3,150
3,115
3,105
5,200
5,110
4,975
2,240
1,715
1,080
2,380
1,855
1,220
3,185
2,575
1,650
3,580
2,810
1,890
1,425
1,415
1,385
1,680
1,575
1,425
0.562
0.545
0.514
0.216
0.214
0.213
0.360
0.353
0.344
0.254
0.194
0.122
0.269
0.210
0.138
0.191
0.154
0.099
0.214
0.168
0.113
0.485
0.482
0.471
0.573
0.536
0.486
44,825
41,070
36,045
21,385
21,080
20,985
45,935
44,165
41,850
10,630
8,130
5,130
11,295
8,795
5,795
10,355
8,365
5,365
11,645
9,145
6,145
21,615
21,380
20,560
31,340
26,150
21,625
1,915
0.298
21,615
1,915
0.301
21,615
2,600
2,470
2,285
0.406
0.385
0.357
39,500
33,700
28,745
2,600
2,470
2,285
0.406
0.385
0.357
39,500
33,700
28,745
2,405
0.410
21,620
2,405
0.410
21,620
3,365
0.580
36,380
3,345
0.577
36,045
3,665
3,555
3,345
0.632
0.613
0.577
44,825
41,070
36,045
HARDY
™
FRAME
Table 2.1A Hardy Frame® HFX/S Installation - on 2500 psi Concrete1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
1 1/8” STD
HFX/S-24x11
132 5/8
1 1/8” HS
7/8” STD
HFX/S-32x11
132 5/8
7/8” HS
7/8” STD
HFX/S-44x11
132 5/8
7/8” HS
1 1/8” STD
HFX/S-15x12
144 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x12
144 5/8
1 1/8” HS
1 1/8” STD
HFX/S-21x12
144 5/8
1 1/8” HS
1 1/8” STD
HFX/S-24x12
144 5/8
1 1/8” HS
7/8” STD
HFX/S-32x12
144 5/8
7/8” HS
7/8” STD
HFX/S-44x12
144 5/8
7/8” HS
1 1/8” STD
HFX/S-15x13
156 5/8
1 1/8” HS
1 1/8” STD
HFX/S-18x13
156 5/8
1 1/8” HS
1 1/8” STD
HFX/S-21x13
156 5/8
1 1/8” HS
Applied Axial
Load 4
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
2,695
0.223
19,805
3,730
0.308
30,420
1,830
1,555
980
2,160
1,680
1,105
2,335
2,330
1,495
3,245
2,550
1,715
1,305
1,300
1,270
1,530
1,445
1,305
0.276
0.234
0.147
0.325
0.253
0.167
0.185
0.184
0.118
0.255
0.201
0.135
0.541
0.537
0.525
0.633
0.597
0.541
1,755
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
9,595
8,130
5,130
11,295
8,795
5,795
8,380
8,365
5,365
11,645
9,145
6,145
21,615
21,380
20,560
30,485
26,150
21,625
2,890
2,880
2,870
4,730
4,645
4,525
2,030
1,555
980
2,160
1,680
1,105
2,990
2,330
1,495
3,245
2,550
1,715
1,305
1,300
1,270
1,540
1,445
1,305
0.238
0.237
0.236
0.391
0.384
0.374
0.306
0.234
0.148
0.325
0.253
0.167
0.236
0.184
0.118
0.256
0.201
0.135
0.540
0.536
0.524
0.638
0.597
0.541
21,615
21,500
21,390
45,935
44,165
41,850
10,630
8,130
5,130
11,295
8,795
5,795
10,730
8,365
5,365
11,645
9,145
6,145
21,615
21,380
20,560
31,340
26,150
21,625
0.324
21,615
1,755
0.324
21,615
2,385
2,265
2,095
0.442
0.419
0.388
39,500
33,700
28,745
2,385
2,265
2,095
0.442
0.419
0.388
39,500
33,700
28,745
2,205
0.456
21,615
2,205
0.456
21,615
3,030
0.633
35,115
3,360
3,260
3,070
0.702
0.681
0.641
44,825
41,070
36,045
2,515
0.246
20,235
2,650
0.260
21,615
3,410
0.334
30,285
1,720
1,420
895
1,975
1,535
1,010
2,210
2,135
1,370
2,970
2,330
1,565
1,205
1,200
1,170
1,385
1,330
1,205
0.337
0.278
0.175
0.386
0.300
0.198
0.224
0.216
0.139
0.301
0.237
0.159
0.597
0.593
0.579
0.685
0.659
0.597
9,855
8,130
5,130
11,295
8,795
5,795
8,675
8,365
5,365
11,645
9,145
6,145
21,615
21,380
20,560
28,750
26,150
21,625
4,335
4,260
4,150
1,855
1,420
895
1,975
1,535
1,010
2,770
2,135
1,370
2,970
2,330
1,565
1,205
1,200
1,170
1,420
1,330
1,205
0.425
0.418
0.407
0.364
0.278
0.175
0.386
0.300
0.198
0.281
0.216
0.139
0.302
0.237
0.159
0.597
0.593
0.579
0.704
0.659
0.597
45,935
44,165
41,850
10,630
8,130
5,130
11,295
8,795
5,795
10,865
8,365
5,365
11,645
9,145
6,145
21,615
21,380
20,560
31,340
26,150
21,625
1,620
0.348
21,615
1,620
0.348
21,615
2,205
2,090
1,935
0.477
0.452
0.419
39,500
33,700
28,745
2,205
2,090
1,935
0.477
0.452
0.419
39,500
33,700
28,745
2,035
0.503
21,615
2,035
0.503
21,615
2,745
0.685
33,895
3,105
3,010
2,835
0.775
0.751
0.708
44,825
41,070
36,045
37
HARDY
™
FRAME
Table 2.1A Hardy Frame® HFX/S Installation - on 2500 psi Concrete1,2
®
Seismic
Model Number
Net Height
H (in)
HD Bolt Dia (in)
and Grade 3
1 1/8” STD
HFX/S-24x13
156 5/8
1 1/8” HS
7/8” STD
HFX/S-32x13
156 5/8
7/8” HS
7/8” STD
HFX/S-44x13
156 5/8
7/8” HS
Applied Axial
Load 4
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
1,000
3,500
6,500
Wind
Allowable
In-Plane Shear
V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
Allowable In-Plane
Shear V 5 (lbs)
Drift at
V 5 (lbs)
Uplift at
V 5,6 (lbs)
2,360
0.271
20,645
2,450
0.281
21,615
3,140
0.360
30,160
1,625
1,310
825
1,820
1,415
935
2,100
1,965
1,260
2,735
2,145
1,445
0.403
0.325
0.205
0.452
0.352
0.232
0.269
0.252
0.162
0.351
0.275
0.185
10,090
8,130
5,130
11,295
8,795
5,795
8,940
8,365
5,365
11,645
9,145
6,145
4,005
3,935
3,830
1,710
1,310
825
1,820
1,415
935
2,550
1,965
1,260
2,735
2,145
1,445
0.459
0.451
0.440
0.425
0.325
0.205
0.452
0.352
0.232
0.327
0.252
0.162
0.351
0.275
0.185
45,935
44,165
41,850
10,630
8,130
5,130
11,295
8,795
5,795
10,865
8,365
5,365
11,645
9,145
6,145
For SI: 1 inch = 25.4 mm, 1 foot = 304.8 mm, 1 lb = 4.45 N, 1 psi 6.89 kPa.
ANCHORAGE NOMENCLATURE
UNREINFORCED
1 1/8-STD-14-20
Ca 1, 2
le
ROD GRADE
ROD DIAMETER
ANCHORAGE NOMENCLATURE
BACK TO BACK
1 1/8-STD-BB-RA
ANCHORAGE NOMENCLATURE
REINFORCED
1 1/8-STD-RA
REINFORCED ANCHORAGE
ROD GRADE
ROD DIAMETER
REINFORCED ANCHORAGE
BACK TO BACK INSTALLATION
ROD GRADE
ROD DIAMETER
Notes
1) The values in this table are Allowable Stress Design (ASD) excluding a 1.33 stress increase and pertain to installation on 2500 psi concrete or nut & washer with 5,000 psi minimum non-shrink grout.
2) For installation on a nut & washer (only) table values must be multiplied by 0.80.
HFX/S
2.1A
3) STD indicates bolts complying with ASTM F1554 Grade 36. HS rods include, but are not limited
to ASTMTable
F1554 Grade
105, ASTM A193 Grade B7 or
ASTM A354 Grade BD.
4) The additional vertical axial loads are concurrent with the allowable shear load. For Panels the axial load must be applied within the middle 1/3 of the Panel width or be uniformly distributed across the entire Panel width. For Brace Frame the axial load is acting and along the centerline of the post. 5) Allowable Shear, Drift @ V and Uplift @ V values may be linearly interpolated for intermediate height or axial loads. 6) The Uplift values listed assume no resisting axial load. To determine anchor tension loads in Panels at design shear values and including the effect of axial loads, refer to Figure 4 of this Report. For Brace Frames the anchor tension load equals uplift minus P, where P is the axial load in the Post.
HFX/S Table 2.1A
FOUNDATION PLAN
38
FOUNDATION PLAN
For referenced details see catalog pages 50-53
HARDY
™
FRAME
HFX-Series Panels in Perscriptive Braced Walls
®
Hardy Frame® HFX-Series Panels in Prescriptive Braced Walls
- 2012 IRC Code Compliance and Manufacturer Recommendations
To resist wind and seismic loads strategic wall lines must be structurally braced. The International Residential Code (IRC) provides
prescriptive guidelines for bracing conventional light frame structures that must consider the following:
1) Identify wall lines that require bracing
2) Determine Braced Wall Panel locations and quantities
3) Select construction method, or material for Braced Wall Panels in each wall line and calculate the length of bracing required.
1) Identify Wall Lines
As a general rule, all exterior walls shall be braced wall lines. Additionally, when parallel braced wall line spacing exceeds the Code limit, inter
mediate braced wall lines are required. For maximum braced wall line spacing refer to Table R602.10.1.3 on page 164 of the 2012 IRC Code.
2) Determine Locations and Quantities
• For wind loading and for Seismic Design Categories A through C, Braced Wall Panels (BWPs) must be located 10 feet or less from each end of a braced wall line and the distance between adjacent edges shall not exceed 20 feet. For Seismic Design Category D0, D1 and D2 BWPs must be located at each end although there are exceptions depending on the Method of bracing. BWP at each end of wall line is always recommended.
• Braced wall lines lengths of 16 feet or less may be braced with a single BWP provided it is 48 inches or greater in width. When a 48 inch BWP width is not available a minimum quantity of two BWPs is required.
• For required bracing length refer to R602.10.3
3) Determine effective Bracing Methods and Material
Refer to Table R602.10.4
The Hardy Frame® Recommended Bracing Method
Garage Fronts:
For “Portal” framing (garage header extends over top of Panel) – HFX-9x79.5
For shear transfer at top plates of a 8 foot nominal wall height – HFX-9x8
For shear transfer at top plates of a 9 foot nominal wall height – HFX-12x9
For shear transfer at top plates of a 10 foot nominal wall height – HFX-12x10
Other Areas:
For shear transfer at top plates of a 8 foot nominal wall height – HFX-9x8
For shear transfer at top plates of a 9 foot nominal wall height – HFX-12x9
For shear transfer at top plates of a 10 foot nominal wall height – HFX-12x10
For Panel anchorage, bottom connection and top connection details refer to the Hardy Frame® Typical Installation Details.
For stacked conditions consult with the Building Designer or Hardy Frames, Inc.
39
HARDY
™
FRAME
Design Examples
®
Equation for tension uplift with added axial load
The expressions listed below may be used to determine uplift tension ( T ) with the additional axial load Padd.
Hardy Frame® Panels
HFX 9x: T=8.6 f’c - 74.4f’c2 - 1.19f’c (5.5Padd + 2VH) - Padd
HFX 12x:T=12.2 f’c - 148.8f’c2 - 1.19f’c (8.50Padd + 2VH) - Padd
Variable
Description/Units
2
f’c
Concrete Compression Stress / psi
HFX 18x:T=18.3 f’c - 334.8f’c2 - 1.19f’c (12.8Padd + 2VH) - Padd
V
H
Shear Load / lbs.
Panel Height / in.
HFX 21x:T=21.9 f’c - 478.1f’c2 - 1.19f’c (15.8Padd + 2VH) - Padd
Padd
Vertical Load / lbs.
HFX 15x:T=14.7 f’c - 216.9f’c - 1.19f’c (9.75Padd + 2VH) - Padd
HFX 24x:T=25.4 f’c - 647.0f’c2 - 1.19f’c (18.8Padd + 2VH) - Padd
Example 1: Combine HFX-Series Panels of different stiffness in the same wall line by proportioning loads.
Given:
2012 IBC, Seismic loading
Concrete f’c = 2,500 psi
Design Shear Load = 5,500 lbs.
Axial Load = 1,000 lbs per Panel
Wall height = 8'1"
5,500 lbs.
Try: (2) HFX-12x8 with (1) HFX-18x8
Step 1: Calculate Stiffness (k)
For HFX12x8: Allowable Shear from Table 1.1A (HS grade HD) = 1,480 lbs
Corresponding Drift = 0.225 in
Stiffness (k12) = 1,480 / 0.225 = 6,578 lbs/in
For HFX18x8: Allowable Shear from Table 1.1A (HS grade HD) = 3,740 lbs
Corresponding Drift = 0.312 in
Stiffness (k18) = 3,740/ 0.312 = 11,987 lbs/in
Total Stiffness (ktotal) = k12 + k12 + k18 = 6,578 lbs/in + 6,578 lbs/in + 11,987 lbs/in = 25,143 lbs/in
Step 2: Calculate Relative Stiffness
k12 / ktotal = 6,578 / 25,143 = 0.26
k18 / ktotal = 11,987 / 25,143 = 0.48
40
Step 3: Check Load Distribution
HFX-12x8 = 0.26 x 5,500 lbs = 1,430 lbs < 1,480 lbs OK
HFX-18x8 = 0.48 x 5,500 lbs = 2,640 lbs < 3,740 lbs OK
HARDY
™
FRAME
Design Examples
®
Example 2: Designing for stacked Hardy Frame® Panels or Brace Frames
Given
2012 IBC, Wind Loading, Concrete f'c= 2,500 psi
1st Floor Wall Height:
9' 1"
Floor System Depth:
1' 0"
2nd Floor Wall Height: 8'1"
Shear Load at 1st Floor (V1):
1,000 lbs Wind
Shear Load at 2nd Floor (V2):
1,000 lbs WInd
Shear Load at Foundation (Vbase): 2,000 lbs Wind (1,000 lbs + 1,000 lbs)
No Additional Vertical Loads
Step 1. Select
HFX-18x8 (STD Rods) at Second Floor: Allowable WInd Shear from Table 1.3A = 2,740 lbs
HFX-18x9 (HS Rods) at First Floor: Allowable Wind Shear from Table 1.1A = 3,310 lbs
Step 2. Check Shear
1,000 lbs
A) Shear at the Second Floor (V2)
HFX-18x8 Allowable Shear = 2,740 lbs > 1,000 lbs OK
B) Shear at the Foundation (Vbase)
HFX-18x9 Allowable Shear = 3,310 lbs > 2,000 lbs OK
8’-1”
Step 3. Check Moment
A) Calculate Cumulative Overturning Moment of the Stacked Panels
Second Floor @ 18' 2" = 218 in x 1,000 lbs = 218,000 in-lbs
First Floor @ 9' 1" = 109 in x 1,000 lbs = 109,000 in-lbs
Total Calculated Overturning Moment = 327,000 in-lbs.
12” Floor
1,000 lbs
B) Calculate Moment Capacity of the Stacked Panels
Use the First Floor Panel Moment Capacity as the Capacity of the Stacked Panels
Allowable Moment = Allowable Shear x Panel Height = 3,310 lbs x 104.25in = 345,068 in-lbs.
9’-1”
C) Check Cumulative Overturning Moment
345,068 in-lbs (Capacity) > 327,000 in-lbs (Cumulative moment) OK
Step 4. Foundation Anchor Tension
Calculated Overturning Moment x Uplift at Allowable Moment. = 327,000 in-lbs x 39,477 lbs = 37,410 lbs
Allowable Moment
345,068 in-lbs
41
HARDY
™
42
FRAME
®
HARDY
™
FRAME
®
43
HARDY
™
FRAME
Accessories
®
Hardy Frame® Post
The Hardy Frame HFP-Series and HFP/S-Series Post are now available in 7/8 inch diameter hold down rods
for connecting to Brace Frames above and in 1-1/8 inch diameter for connecting to Panels above.
Tables provide tensile values for standard grade (STD) and for High Strength (HS) hold down rods.
Be sure to include the embed callout on the foundation plan
The access holes to both the bottom and the top hold down rods are now located on the same edge of the post.
All Posts are 3 1/2" x 3 1/2" square and are fabricated from 12 gage steel. Custom heights up to the
maximum listed in the table are available.
Hardy Frame® Panel
to two Hardy Frame®
Posts below
HARDY FRAME PANEL BOTTOM
®
2 POSTS
Model Number
Net Height
(in)
HD Dia (in)
®
Hardy
Frame®
Hardy Frame® Post
HARDY FRAME BRACE FRAME
HARDY
Brace
Frame
on nutFRAME
and washerPOST BOTTOM
BOTTOM
2 POSTS
ON (requires
DOUBLE
NUT
to two Hardy Frame®
5,000
psi
Posts below
non-shrink grout)
®
Allowable
Compression 2,3,4 (lbs)
STD
Allowable
Tension 5
(lbs)
HS
Allowable
Tension 5
(lbs)
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
13,080
21,620
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
28,185
35,275
HFP-Series
HFP8-7/8
HFP8-1 1/8
HFP9-7/8
HFP9-1 1/8
HFP10-7/8
HFP10-1 1/8
HFP11-7/8
HFP11-1 1/8
HFP12-7/8
HFP12-1 1/8
HFP13-7/8
HFP13-1 1/8
92 1/4
92 1/4
104 1/4
104 1/4
116 1/4
116 1/4
128 1/4
128 1/4
140 1/4
140 1/4
152 1/4
152 1/4
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
24,735
22,325
19,900
17,520
15,230
13,050
HFP/S-Series
44
HFP/S8-7/8
HFP/S8-1 1/8
HFP/S9-7/8
HFP/S9-1 1/8
HFP/S10-7/8
HFP/S10-1 1/8
HFP/S11-7/8
HFP/S11-1 1/8
HFP/S12-7/8
HFP/S12-1 1/8
HFP/S13-7/8
HFP/S13-1 1/8
96 5/8
96 5/8
108 5/8
108 5/8
120 5/8
120 5/8
132 5/8
132 5/8
144 5/8
144 5/8
156 5/8
156 5/8
For SI: 1 inch = 25.4 mm, 1 lbf = 4.45 N
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
7/8
1 1/8
23,865
21,440
19,025
16,670
14,430
12,330
1) The values in this table are Allowable
Stress Design (ASD), exclude a 1.33
stress increase, and assume installations
on a rigid base, or a nut and washer with
non-shrink grout of 5000 psi minimum
compressive strength in accordance with
section 3.7.6 of this report.
2) The maximum allowable compression of
the post must limited as follows:
A) Wood with 625 psi allowable compression perpendicular to grain = 7,656 lbs.
B) Wood with 680 psi allowable
compression perpendicular to grain = 8,330 lbs.
C) 2500 psi Concrete = 10,412 lbs.
D) 3000 psi Concrete = 12,495 lbs.
E) 4000 psi Concrete = 16,660 lbs.
3) For installation on supporting materials
other than noted above, the Design Professional must check the Bearing Stress
based on the Post bearing area of 12.25
square inches.
4) For compression loads exceeding the
allowable bearing stress of the supporting
material the Building Design Professional
is permitted to design bearing plates to increase the bearing area in order to reduce
the bearing stress.
5) STD indicates bolts complying with ASTM
F1554 Grade 35. HS rods include, but are not
limited to ASTM F1554 Grade 105, ASTM
A193 Grade B7 or ASTM A354 Grade BD.
HARDY
™
FRAME
Accessories
®
Hardy Frame® Saddle
The Hardy Frame® Saddle (HFS) is a 14 gauge steel channel
intended to be used as a splice at locations where plumbing or
other vertical penetrations destroy the structural integrity of a walls
top plates. The Saddle can be installed over the top or from the
underside of the top plates, and is capable of resisting both tension
and compression loads in a clearspan of up to 4-½" inches. For
wall depths greater than 3-½", or to install after plumbing lines
have been run, the product can be separated into two “L” shapes by Omit fasteners at first
gripping the legs of the channel and flexing the top surface along
holes when the end
distance is less than 1
the serration lines.
inch.
Separation into two “L” shapes
at 6” and greater depths.
Installation to underside of
double top plates.
Hardy Frame® Saddle 1, 3, 4, 7
Model Number
Fastener Quantity2
Allowable Tension 5, 6 (lbs)
Allowable Compression (lbs)
HFS24
24-16d common
2950
2500
HFS36
32-16d common
4280
2500
For SI 1 inch = 25.4 mm, 1 lb. = 4.45 N
1.The maximum notched section in the wood member is 4-1/2 inches.
2.Fastener quantity is the number of 16d Common nails to be installed into each of the members to be joined. Table 6.2 of this Report
provides reductions of tabulated loads where other nail styles are used.
3.When the end distance from the joint to the first nail hole is less than 1-inch, omit the (2) nails in the 3-inch side-plate and the (1)
nail in the 1-1/2 inch side-plate that are nearest the joint.
4.For the condition described above there is no reduction in values provided the HFS24 is installed with minimum 22-16d Common
nails in each member being joined (44 total) and the HFS36 is installed with 31-16d Common nails in each member (62 total).
5.The allowable tension capacities are for normal duration. The values may be adjusted for other durations, such as for seismic and
wind loading in accordance with the AF&PA NDS.
6.Allowable tension capacities assume the Saddle is attached to lumber members with a specific gravity of 0.49 or higher
45
7.Loads shown are Allowable Stress Design (ASD) and exclude a 1.33 stress increase.
41
HARDY
™
FRAME
Accessories
®
Hardy Frame® HFX-Series Template (HFXT)
Grade 8 Hex Nut (Included with Panel)
Hardened Round Washer (Included with Panel)
ALT: two SAE Washers
ALT: two Flat-Round Washers
•Assures proper bolt spacing and alignment
•16 gage material supports weight of embed bolts
•Variety of applications
•Also available in 2x6
Hold Down Anchor
“STD” = ASTM F1554 Grade 36
•Requires HFXBB (Bolt Brace)
or Plate Washers @ embed end
“HS” = ASTM A193 Grade B7
•Requires 1/2 x 3 x 3 Plate Washers
@ embed end, HFXBB (Bolt Brace) optional
•Do not attempt to bend HS rods
1/2 x 3 x 3 Plate Washer
Hardy Frame
Bolt Brace
(HFXBB)
Standard Grade Hex Nut minimum (Included with Kit)
HFXBB - Bolt Brace (Included with Kit)
Hardy Frame® HFX-Series Template Kit (HFXTK)
Panel Kit at Slab
Panel Kit at Curb
Brace Frame Kit
at Interior Footing
Hardy Frame Bolt Brace
Hardy Frame® HFX-Series Template Kit Components
Kit Model Number
Template (1 ea)
Bolt Brace (1 ea)
HFXTK9
HFXTK12
HFXTK-HS12
HFXTK15
HFXTK-HS15
HFXTK18
HFXTK-HS18
HFXTK21
HFXTK-HS21
HFXTK24
HFXTK-HS24
HFXTK32
HFXTK-HS32
HFXTK44
HFXTK-HS44
HFXT9
HFXBB9
HFXT12
HFXBB12
HFXT15
HFXBB15
HFXT18
HFXBB18
HFXT21
HFXBB21
HFXT24
HFXBB24
HFXT32
NA
HFXT44
Panels
Brace Frames
Hold Down Anchor Assembly
1-1/8 STD
1-1/8 HS
7/8 STD
7/8 HS
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Hold Down Anchor Assemblies:
1-1/8 STD = 1-1/8 x 32" ASTM F1554 Grade-36 all thread with (3) Standard Hex Nuts.
1-1/8 HS = 1-1/8 x 38" ASTM A193 Grade-B7 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
7/8 STD = 7/8 x 30" ASTM F1554 Grade-36 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
7/8 HS = 7/8 x 31" ASTM A193 Grade-B7 all thread with (1) 1/2x3x3 ASTM A36 Plate Washer & (3) Standard Hex Nuts
46
For other rod lengths contact Hardy Frames
1) All Thread length = length of embed (le) + 12” (formboard) + 6”(Kit assembly + height above concrete) For Raised Floor installations adjust the all thread length or extend length with a Grade 8 Coupling nut
2) The Hardened Round Washers for connecting the Panel base may be substituted with two SAE or two Round-Flat Washers
3) STD assemblies require a Hardy Frame® Bolt Brace (Minimum) double nutted at the embed end or 1/2x3x3 ASTM A36 Plate Washer
4) HS assemblies require 1/2x3x3 ASTM A36 Plate Washer (Minimum) and the Hardy Frame® Bolt Brace is optional
5) HS all thread rods provided by Hardy Frames, Inc. are stamped on both ends HF
B7
HARDY
™
FRAME
Accessories
®
Back-to-Back Template Hardy Frame®
HFX-Series Double Template
HFXDT
•Sets bolts for “Back-to-Back” installation in 8˝
wall framing
•Large cut-outs allow concrete and mortar
placement
•14 gage material supports weight of embed bolts
HFXDBB
Anchor Bolt Assemblies
Hardy Frame Anchor Bolt Assemblies (HFAB) are sold individually in lengths of 36", 48", 60" and
72" inches to provide rod lengths for various embed depths. HFABs are available in Standard Grade
(STD) or High Strength Grade (HS) to meet plan specifications and in 1-1/8 inch diameters for
anchoring Panels, 7/8 inch diameters for anchoring Brace Frames.
For all structural components provided in Hardy Frame Template Kits order the following:
Panels
2 each HFAB1-1/8 (Specify length and STD or HS grade)
1 each HFXT Template
1 each HFXBB Bolt Brace
ANCHOR BOLT
ASSEMBLY
Brace Frames
2 each HFAB7/8 (Specify length and STD or HS grade)
1 each HFXT Template
Anchor Bolt Assemblies
Panels
Wt
Wt
(lbs) Brace Frames (lbs)
HFAB1-1/8x36STD 10.5
HFAB7/8x36STD 6.6
HFAB1-1/8x48STD 13.5
HFAB7/8x48STD 8.2
HFAB1-1/8x60STD
HFAB1-1/8x72STD
HFAB1-1/8x36HS
HFAB1-1/8x48HS
HFAB1-1/8x60HS
HFAB1-1/8x72HS
HFAB7/8x60STD
HFAB7/8x72STD
HFAB7/8x36HS
HFAB7/8x48HS
HFAB7/8x60HS
HFAB7/8x72HS
16.3
18.9
10.8
13.5
16.4
19.3
9.8
11.4
7.2
9.1
11
12.9
Hardy Frame® Base Extension (HFBX)
6 1/2"
•Connects adjacent wood mudsill and stud (or Post)
to Hardy Frame Panel/Brace Frame
•Adjustable installation. Extends up to 6 1/2" beyond
face of Panel
•“Break-away” tab allows installation after Panel/
Frame has been set
•Pre-punched holes for wood nailing
•Can be screwed to Panel/Brace Frame for additional
stability
47
HARDY
™
FRAME
Accessories
®
Hardy Frame® Stacking Washer (STK)
•Hardy Frame® Stacking (“STK”) washers are required in the top of Panels when connecting to a hold down rod from above.
•Hardy Frame® “STK” Panels, include Stacking Washers pre-welded inside the top
channel.
•When Stacking Washers have not been pre-welded, they are available individually or
in Tension Connector Kits (HFTC)
•HFSW12 measures 2-3/4˝ x 3˝ for installation in HFX-12x Panels
•HFSW15-24 measures 2-3/4˝ x 5˝ for installation in HFX-15x through HFX-24x Panels
Hardy Frame® Bearing Plate (HFXBP)
For Installation with Hardy Frame® Panels
®
•3/4˝ thick x 3 1/2˝ wide ASTM A36 steel
HARDY FRAME PANEL BOTTOM
•Length extends 3” beyond Panel edges Check for outside corner conditions!
ON MULTI STORY
•Reduces wood deformation from overturning forces
•Reduces effects of shrinkage by eliminating bottom plate
Note: The allowable values in raised floor and upper floor tables assume installation of HFXBP.
Installation without a HFXBP may result in a reduction of allowable loads
Hardy Frame® Deep Socket (HFDS)
®
HARDY FRAME PANEL BOTTOM
ON RAISED FLOOR
ITEM
HFDS 7/8"
HFDS 1-1/8"
ROD DIA
7/8"
1-1/8"
NUT SIZE
1-5/16"
1-11/16"
OS DIA.
2-3/8"
2-3/8"
HEIGHT
5-5/16"
5-5/16"
Hardy Frame® Bolt Lever (HFBL)
•Straightens embed bolts while preventing concrete spall
•Place nut on bolt and position inside the HFBL cylinder. With handle
oriented in direction to be bent, pull handle downwards
•Unique base plate applies compression to concrete to prevent spall
•Extension handle provides leverage
HFBL
48
• Note: Not recommended for use with high strength rods
EXTENSION
HARDY
™
FRAME
Accessories
®
Hardy Frame® Tension Connectors
*For joist depths up to 14˝
•Hardy Frame "STK" washers are required in the
top of Panels when connecting to a hold down
rod from above.
•Includes all rods, nuts and washers for making
floor to floor tension connections
•Provides connection of Panels and Brace Frames straight or “staggered” stack conditions
•For Panels - Indicate Panel width and rod grade
•For Brace Frames - Indicate rod grade
Panels floor to foor
straight stack
HFTC15-24 STD
ROD GRADE
15 in. THROUGH 24 in. PANEL WIDTHS
HARDY FRAME TENSION CONNECTORS
®
HARDY FRAME PANEL BOTTOM
ON MULTI STORY
HFTC-7/8 STD
ROD GRADE
ROD DIAMETER (FOR BRACE FRAMES)
HARDY FRAME TENSION CONNECTORS
Brace Frames floor to foor
straight stack
®
HARDY
FRAME
Hardy
Frame®BRACE
TensionFRAME
Connector Kit Componentsnts
BOTTOM ON MULTI STORY
Panels
Tension Kit
Model Number
“STK” Stacking
Washer
Brace Frames
Hold Down Anchor Assembly
1-1/8 STD 1-1/8 HS 7/8 STD
HFTC12-STD
2-HFSW12
HFTC12-HS
2-HFSW12
HFTC15-24 STD
2-HFSW15-24
HFTC15-24 HS
2-HFSW15-24
HFTC-7/8 STD
NA
HFTC-7/8 HS
NA
7/8 HS
2
2
2
2
2
2
Hold Down Anchor Assemblies:
HFTC-1 1/8 STD = 1-1/8 x 26” ASTM F1554 Grade-36 all thread with
(2) Hardened Round Washers & (2) Grade 8 Hex Nuts.
HFTC-1 1/8 HS = 1-1/8 x 26” ASTM A193 Grade-B7 all thread with (2)
Hardened Round Washers & (2) Grade 8 Hex Nuts
HFTC-7/8 STD = 7/8 x 26” ASTM F1554 Grade-36 all thread with (2)
Hardened Round Washers & (2) Grade 8 Hex Nuts.
HFTC-7/8 HS = 7/8 x 26” ASTM A193 Grade-B7 all thread with (2)
Hardened Round Washers & (2) Grade 8 Hex Nuts
1) Hardy Frame® “STK” washers are required in the top channel of Panels when connecting to a hold down rod from above
2) All Thread length fits up to a 14” joist depth + 3/4” subfloor + (4)
2x wood plates
3) Each Hardened Round Washer may be substituted with (2) SAE or (2) Round-Flat Washers
4) HS all thread rods provided by Hardy Frames, Inc. are stamped on both ends
HF
B7
49
HARDY
™
FRAME
®
1D
1A
1G
1B
1E
1F
1C
UNREINFORCED ANCHORAGE
2A
2E
2D
2B
REINFORCED ANCHORAGE STIRRUP LAYOUT - PLAN VIEW
2F
2C
3A
3E
3D
3B
50
BACK TO BACK STIRRUP LAYOUT - PLAN VIEW
3F
3C
BACK
UNREINFORCED ANCHORAGE
REINFORCED ANCHORAGE
1
A
2
BACK TO BACK REINFORCED ANCHORAGE 3
B
C
E
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
HARDY
FRAME
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
®
™
®
REVISIONS DATE
TABLE NOTES
D
DATE:
4-1-2014
51
HARDY
™
FRAME
®
BACK TO BACK INSTALLATION 11
TOP CONNECTION W/4x FILLER 10
TOP PLATE CONNECTIONS
6x
7
BALLOON WALL INSTALLATION
6
TOP
RAISED FLOOR HEAD-OUT
9
INSTALLATION ON FOUNDATION 5
INSTALLATION ON 2x PLATE
8
INSTALLATION ON NUTS & WASHERS
52
4
I
4
6x HEADER ABOVE-SECTION
TOP CONNECTION TO HEADER
INSTALLATION ON CURB
3
2
1
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
HARDY
FRAME
B
C
D
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
®
™
®
REVISIONS DATE
A
DATE:
4-1-2014
53
HARDY
™
FRAME
®
POST
RAISED-OS CORNER
4
RAISED BEARING PL
3
RAISED STEM WALL
2
C
PYRAMID STACK
8
STACK @ OS CORNER 7
STRAIGHT STACK
6
54
OPEN WEB TRUSS 14
STEEL BM-WELDED HD 13
WOOD BM THRU BOLT 12
POS
12
POST ON DBL. NUT 1
2
A
B
CRIPPLE WALL
POST BELOW 11
5
C
STAGGERED-THRU BOLT 10
STAGGERED TO POST 9
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
HARDY
FRAME
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
®
™
®
REVISIONS DATE
DATE:
4-1-2014
55
HARDY
™
FRAME
®
Hardy Fr
INSTALL ON 2x PLATE 3
POST ON DBL. NUT
6
INSTALL ON NUT & WASHER 2
POST ON CONCRETE
5
2012 IBC HOLD DOWN ANCHORAGE
INSTALL ON FOUNDATION 1
Step 1: Con
A) Concrete
B) Attach th
above an
C) At Interio
D) Footing d
E) Determin
finished
Step 2: Firs
A) Installati
B) Set the H
C) Tighten n
D) After fram
sill plate
For fillers
Step 2: Firs
A) If the Ha
to a door
B) Set the H
C) Tighten n
D) After fram
Top plate
BACK TO BACK INSTALLATION 4
8A
7A
B
5-3/4"
2012 IBC HOLD DOWN ANCHORAGE
8B
7B
56
ANCHORAGE AT STEM WALL 9
2012 IBC HOLD DOWN 8C
ANCHORAGE
7C
1) Applies
2) STD in
3) HS ind
4) Concre
5) Installa
6) Shear
7) Shear
8) Founda
9) The Bu
HARDY
FRAME
®
REVISIONS DATE
Hardy Frame Installation
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
ON 1
Step 1: Concrete Preparation
A) Concrete contractor shall use Hardy Frame HFX-Series Templates to accurately place embed bolts for spacing and alignment in the wall.
B) Attach the HFX-Series Template to a formboard at the location specified on plans and Install bolts. Install 1/2"x3"x3" plate washers with nuts
above and below at hold downs.
C) At Interior footings Templates may be secured in place using stakes.
D) Footing design, embed depths, and anchor edge/end distances are per the Building Design Professional.
E) Determine if the Hardy Frame will be installed on concrete or a mudsill. For installation directly on concrete the recommended bolt height above
finished concrete is 2-3/4" and for installation on a 2x mudsill it is 4-1/4".
Step 2: First Floor Installation on concrete
A) Installation of a moisture barrier such as Moistop or 15# felt is recommended under the Frame.
B) Set the Hardy Frame over the embed bolts and install (1) Hardened Round, (2) Round-Flat, or (2) SAE washers and a Grade 8 hex nut.
C) Tighten nuts until snug tight.
D) After framing and plumb & line are complete, place a 2x filler above the Frame to make up the height difference created by eliminating the
sill plate, and connect with 1/4" x 4-1/2" screws through the top of the Frame, through the filler and into the double top plates or header above.
For fillers larger than 1-1/2" net, refer to detail 3/HFX5.
Step 2: First Floor Installation on a Sill Plate
A) If the Hardy Frame is to be installed on a mudsill, plot the bottom plate and cut the length to match the width of the Frame. If located next
to a door opening, allow the plate to run into the opening.
B) Set the Hardy Frame over the embed bolts and install (1) Hardened Round, (2) Round-Flat, or (2) SAE washers and a Grade 8 hex nut.
C) Tighten nuts until snug tight.
D) After framing and plumb & line are complete, install 1/4"x3" screws through the top of the Frame into the double top plates or header above.
Top plates must be continuous or have a minimum 8’ lap at splices.
®
A
TION 4
7A
DETAILED SPECIFICATION GUIDE
B
5-3/4"
20-1/2"
32"
7B
7C
5-3/4"
5-1/2"
31"
C
5-1/2"
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
™
44"
1) Applies to 2500 psi compressive strength concrete, both seismic and wind loading.
2) STD indicates rods complying with ASTM F1554 Grade 36 with a 1/2x3x3 plate washer double nutted on the embed end.
3) HS indicates rods complying with ASTM A 193 Grade B7 (or equal) with a 1/2x3x3 plate washer double nutted on the embed end.
4) Concrete edge distance must comply with ACI-318-08 D8.2.
5) Installation on curbs or stemwalls must be 6 inch width minimum, and require supplemental shear reinforcement per ACI-318-08, fc = 2500 psi.
6) Shear Ties #3 rebar, grade 60 (min).
7) Shear Ties are not required for installations away from Foundation Edge, for installation on wood framing or for Braced Wall Panel applications.
8) Foundation Design is by others.
9) The Building Design Professional is permitted to modify these details to accommodate a specific condition.
2012 IBC HOLD DOWN ANCHORAGE TABLE
D
DATE:
4-1-2014
57
HARDY
™
FRAME
®
RAKE FILLER 4
POST TO TOP PLATES
4X FILLER
8
3
HEADER - 4x FILLER 7
2X FILLER 2
HEADER - 2x FILLER 6
HEAD
BACK TO BACK TOP PLATES 10
STEEL
58
HARDY FRAME SADDLE 12
BACK TO BACK 2x FILLER 11
R 6
ATES 10
TOP PLATE
1
A
HOLE PATTERN TOP & BOTTOM
STEEL BEAM W/NAILER 9
B
HEADER - CRIPPLES 5
C
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
HARDY
FRAME
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
®
™
®
REVISIONS DATE
DATE:
4-1-2014
59
HARDY
™
FRAME
®
RAISED-OS CORNER 4
PYRAMID STACK
8
3
RAISED STEM WALL 2
RAISE
STACK @ OS CORNER 7
STRAIGHT STACK 6
CR
STEEL BM-WELDED HD 13
WOOD BM THRU BOLT 12
P
RAISED FLOOR
60
OPEN WEB TRUSS 14
2
6
T 12
A
B
CRIPPLED WALL 5
POSTS BELOW 11
HOLE PATTERN TOP & BOTTOM
STAGGERED-THRU BOLT 10
C
STAGGERED TO POST 9
THIS DETAIL SHEET IS NOT PROPRIETARY AND IS NOT REQUIRED
FOR PLAN SUBMITTAL WITH HARDY FRAME PRODUCTS
RAISED FL. HEAD-OUT 1
1732 PALMA DRIVE, SUITE 200, VENTURA, CA 93003
TELEPHONE: 800 754-3030 / www.hardyframe.com
HARDY
FRAME
®
™
®
REVISIONS DATE
DATE:
4-1-2014
61
HARDY
™
FRAME
The Hardy Frame® Moment Frame (SMRF)
®
SidePlate Code Evaluations
Included in the Standard AISC 358
ICC-Evaluation Service ESR-1275 Report
LA City Research Report RR-25393
Hardy Frames introduced the first standardized,
prefabricated Special Moment Frame in 2006. Since then
we have delivered thousands of Moment Frames that have
been successfully installed. Our Special Moment Frames
provide maximum structural capacities and enable large
openings in architectural design.
Hardy Frame® Special Moment Frames utilize the SidePlate
moment connection which has now been approved by
the Connection Prequalification Review Panel (CPRP) for
inclusion in the AISC 358 Prequalified Moment Connection
Standard. Typically, Hardy Frame® Moment Frames
are delivered to the jobsite in one-piece, completely
prefabricated with wood nailers attached, and ready to be
installed with no assembly. No field welding and or special
inspection is required.
On production framing jobs the Hardy Frame® Moment
Frame can’t be beat. We have delivered truckload
quantities of up to 30 Moment Frames that were installed
in a single day. That is an accomplishment that cannot be
matched by conventional or assembly-required moment
frames.
Custom Sizes and Custom
Calculations
We offer over 300 standard dimension Moment Frames,
but we don’t stop there. We also offer calculations
and solutions for sizes beyond our standard listing. We
commonly provide solutions for two-story and multi-story
frames as well as for fixed based connections.
At Hardy Frames we understand that Moment Frames
require job-specific considerations. We work with
contractors to meet their needs without treating
adjustments as a custom order.
Moment Frame Template Kits
62
Template Kits are included with the purchase of the Hardy
Frame® Moment Frame and are a stock item that can
be shipped within one business day. The Kit includes all
embed anchors, nuts, washers and Templates so the
concrete pour can proceed prior to the Moment Frame
delivery. Correctly locating the anchors is easy with a slot
provided in the Template to measure the “Win”, (inside
steel-to-steel) dimension.
Double nut
at HFT
nce
Distatch is
ured
o
Measnotch to nrame
fromMoment Fnsion
ime
W IN d
Double nut at bolt brace
HARDY
™
FRAME
The Hardy Frame® Moment Frame in retrofit application
®
For retrofit applications, Moment Frames can be installed inside or outside an existing wall
line by following the suggested step-by-step installations below.
Installation inside an existing wall line
1. Dig footing for pads or grade beam per the Engineer of Records specification.
2. Tilt Moment Frame and lower the base plate of both columns into the trench prior to pouring concrete.
3. Rotate top of Frame until it is vertical, raise Frame up until the top of beam wood nailer is in contact with the existing framing above then temporarily shore the Frame in place.
4. Assemble the Template Kit as shown in Hardy Frame Details and the illustrations provided on the Template Kit packaging
5. Install all hold down anchors in the base plates
6. With specified reinforcement in place (not shown) pour concrete into footing up to the bottom of the column base plates.
NT
MOME
NT
MOME
FRAME
FRAME
7. At top of beam wood nailer install USP MP4F connectors to the existing collector above per the plan specifications by the Engineer of Record.
T
MOMEN
FRAME
Installation outside an existing wall line
E
T FRAM
MOMEN
1. Dig footing for pads or grade beam per the Engineer of Records specification.
2. Assemble the Template Kit as shown in Hardy Frame Details and the illustrations provided on the Template Kit packaging
3. Locate assembled Template Kits at each of the column locations and orient the Template edges with the slotted holes in the same direction as the Moment Frame wall line
4. Measure the interior “slot to slot” distance to be the same as the “Win” (inside steel to steel) dimension for the Frame being installed.
5. Set the top of all anchors to be 4-1/4 inches (minimum) above top of concrete
6. With specified reinforcement in place (not shown) pour concrete into footing
7. Install one nut with one washer above on all anchors with the washers at approximately 1-1/2 inches above top of concrete
8. Install one washer in contact with the top of base plate and nut above
63
NT
MOME
9. Level the Frame and make height adjustments by raising or lowering the nuts below the base plate. Check to be sure the pre-attached angle above the MF beam is in contact with the outside (or inside) face of wall per the plan specification by the Engineer of Record.
FRAME
T
MOMEN
FRAME
10.Install screws horizontally through the angle into the existing wood structure
HARDY
™
FRAME
USP Structural Connectors Capacity
®
Hardy Frame recommends USP Connectors products for use with Hardy Frame Panels, Brace Frames and Moment Frames.
WS-1/4" x 3" Screws
For connection directly
to top plates
Serrations
SH
1/4˝ Beveled reamer
on 2 1/2˝ or longer
Wood Screws
L
1A
USP name
T
Screw length
3/
8”
Cut threads
Self drilling point
WS-1/4" x 4-1/2" Screws
For ®2x filler above
Dimensions (in)
USP
Stock No.
Description
DY FRAME PANEL AT TOP PLATES
1B
Allowable Shear (160%)
L
SH
T
Thread
Finish
12 GA
Steel
to DF-L/SP
12 GA Steel
to S-P-F
WS3
1/4" x 3"
3
3/4
2-1/4
2
Zinc
668 lbs
475 lbs
WS45
1/4" x 4-1/2"
4-1/2
1-1/4
3-1/4
3
Zinc
825 lbs
673 lbs
1. Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2. Zinc finish = Yellow Zinc Dichromate.
3. Code Approved by ICC Evaluation Service (ESR-2761), LA City (RR-25850), and State of Florida (FL-16091).
Embossed plate lines
MP4F = 3˝
®
MP6F = 3 3/4˝
DY FRAME PANEL WITH 2X FILLER
"MP4F" Plate Connector
MP4F = 1˝
MP6F = 1 3/4˝
For 4x filler above
4 1/4˝
2
Fastener Schedule
USP
Stock No.
Steel
Gage
Orientation
MP4F
20
H
Each Member
Qty
Type
6
8d x 1-1/2
Direction
of Load
H
Allowable Shear (160%)
DF-L/SP
S-P-F
845 lbs
710 lbs
1. Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2. 8d nails are .131" dia. x 1-1/2" long, minimum embedment shall be 1-5/16".
3. Code Approved by ICC Evaluation Service (ESR-3455), LA City (RR-25779), and State of Florida (FL-821).
"KRPS" Straps
®
Portal condition
withWITH
#10
HARDYFor
FRAME
PANEL
self-tapping
screws
to
Panel
4X FILLER
and 16d nails to header
L
KRPS28 12˝
1 1/2˝
USP
Stock No.
64
KRPS18 & KRPS22 5 1/2˝
Steel
Gage
Dimensions (in)
W
KRPS18
3
KRPS22
KRPS28
16
1-1/2
Fastener Schedule
Allowable Tension (160%)
L
#10 Screws
16d Nails
DF-L/SP
18-5/16
6
6
1325 lbs
8
8
1720 lbs
22-5/16
28-5/16
1. Allowable loads have been increased 60% for wind or seismic loads; no further increase shall be permitted.
2. 16d nails are .162" dia. x 3-1/2" long, minimum embedment shall be 1-5/8".
3. #10 Hex Head self-tapping screws with a Self Drilling (SD) point are recommended into face of Panel.
USP 1-800-328-5934 • uspconnectors.com
®
HARDY
™
FRAME
USP Structural Connectors Technology
®
The USP commitment to technology.
USP Mobile Solutions
USP Software Solutions
USP Specifier™ Instant product and design information when you
need it. Search through our comprehensive catalog of connectors,
compare products, price out jobs and produce the most accurate, cost
effective solutions possible.
iPad® Catalog. Download the entire USP catalog to your iPad®.
Quickly search products by application.
QR Codes. Scan USP QR codes
on your smart phone before you
buy. Quickly look up product
information to make the right
choice.
Sapphire Supply™- 3D design and layout software for your
EWP and Lumber design needs and tools for doing layout and
take-off for whole house estimation.
The USP Deck Designer.™ Online anytime. The easy yet
comprehensive deck design tool helps you design the perfect deck,
generate 3D views, specifications, materials list and building permit
applications.
Sapphire Build.™ Design software for modeling building in
3D and track vertical load distribution throughout the structure;
roof to foundation, to optimize structural member design.
Black Point Option Manager.™ Designed for the residential
builder, now you can easily manage options and material
take-offs.
USP 1-800-328-5934 • uspconnectors.com
65
HARDY
™
FRAME
®
Hardy Frame® Z4 Continuous Rod Tie-Down Systems
Quick Connect Systems for Resisting Lateral Load and Wind Uplift
ROOF RAFTERS
Quick Connect System for
Lateral Loads
To resist tension loads due to
overturning moments in multistory buildings the Z4 Cinch Nut
is installed over a Bearing Plate
at each level in a fast and easy
“Quick Connect” application. At
the upper-most level a Cinch
Nut is installed over a Bearing
Plate above the top plates. At
walls below that bear on wood
floor systems the Cinch Nut and
Bearing Plate is installed over
the bottom plate. Tension loads
are gathered at each level and
transferred into the foundation
through a continuous system
of Cinch Nuts, Bearing Plates,
threaded rods and coupling
nuts, all available from Hardy
Frame – Z4.
QUICK CONNECT ASSEMBLY
Z4 Continuous Rod Tie-Down Systems utilize Z4 “Cinch Nuts” to
compensate for wood shrinkage and building settlement that cause
connections to loosen over time. The Cinch Nut uses a self-ratcheting
action that permits threaded rods to move, or “travel” perpetually in
one direction only through the device. Available for installation with
threaded rods that are 5/8 inch through 1-1/2 inch diameter in 1/8
inch increments, the Z4 Cinch Nut has been code evaluated and
published in ESR-2190.
ROOF RAFTERS
Customer Service
• Hardy Frame-Z4 offers comprehensive technical support, design of
tie-down systems to meet engineered loads and delivers products
packaged and labeled for easy identification in the field.
• For the Design Professional Z4 provides pre-engineered standard
runs as well as individual component capacities to design custom
runs. We also offer turn-key, sealed designs when engineered loads
are provided to us.
• Building Officials will be confident approving our systems because
they assemble with code evaluated components that have an ESR
listing.
66
• For the installer, our products will arrive on time and be packaged
systematically for easy identification of parts and sequence of
assembly. We offer typical installation details, immediate telephone
support and personal training is available from a sales or customer
service representative.
.
Zone Four (951) 245-9525
Quick Connect System for
Wind Uplift
For resisting roof uplift loads
resulting from wind the Z4 Cinch
Nut is installed over a Bearing
Plate above the top plates with
roof framing above to create a
tie-down system. Uplift forces
are transferred into a continuous
system of threaded rods and
coupling nuts that form a load
path to the foundation.
HARDY
™
FRAME
Hardy Frame® Z4 CT and T2
®
Paired and Sandwiched Connections for Tension and Compression Load Transfer
Z4 Continuity Tie
The Z4 “CT” is a steel tube with steel end
plates welded to both ends designed to
transfer tension and compression forces
from one beam to another (Continuity Tie
application) or from a beam to a perpendicular
wall (Wall Tie application). Connections
are made by bolting the tube to a wood
member and attaching to a threaded rod for
transferring forces.
Paired CT Wall Tie
T2 installation similar
Accurate Placement and Installation
Step 1: Use the two 3/16” holes provided
to nail CT or T2 at desired location on wood
member
Paired T2 Continuity Tie
Step 2: Use the CT or T2 as a template to
accurately drill holes for bolting
Step 3: Make bolted connection to the wood
member per plans and specifications
Step 4: Make threaded rod connection per
plans and specifications.
Z4 Tension Tie
Sandwiched T2
As Concentric
Hold-Down
Paired T2
For Concentric,
High Capacity
Hold-Down
Zone Four (951) 245-9525
The Z4 “T2” is a steel tube with a steel end
plate welded to one end designed to transfer
tension forces as a concentric hold-down
device. Sandwiched Installations are made
by through bolting two wood members with a
T2 between and “Paired Installations” through
bolt two T2 connectors with a wood member
between. For both installation methods the
tube is then attached to a threaded rod to
transfer the tension loads.
67
HARDY
™
FRAME
Testing
®
Research, Test, Innovate...
It’s what we do!
At Hardy Frame® quality doesn’t just happen,
it’s a result of constant research, testing and
improving. Choose the leading shear wall
system with the quality and performance you
can count on. Specify Hardy Frame® Shear
Wall System.
68
HARDY
™
FRAME
Hole Chart and Attachments
®
Hole Chart
Fixture Installation
An additional 1" diameter hole may be drilled in the
upper half of the Panel when it is located in the hatched
area.
To drill more than one hole, a larger diameter hole or a
hole in a location outside of the hatched area, contact
Hardy Frames.
3˝ DIAMETER
HOLE PROVIDED
IN FACE OF
15˝,18˝, 21˝ AND
24˝ WIDE PANELS
4˝
9˝
REMOVE
HATCH
1" ABOVE &
1˝
1" BELOW
UPPER HALF
(PANEL HEIGHT
÷ 2)
4˝
4˝
2x4 Wall Framing
•There is no “inside or outside face” of Hardy Frame Panels.
•Install with the cavity face of Panel oriented in the direction of the fixture to be attached
•Install 2x backing in the cavity and secure with #10 (minimum) self-tapping screws through the wood into Cavity Face
the steel or with 1/4"WS-Series screws through
Panel
in
2x4 framing with
pre-drilled holes in the face of Panel. Pre-drilled cavity
towards
outside
holes must be evenly spaced no less than 3" OC
face of wall
2x6 Wall Framing
•Installation of Panels are recommended to be at the inside face of a 2x6 wall to increase the concrete edge distance at the hold down anchors and to provide a 2" recess that can be used to:
•Provide flat stud backing for surface finishes
•Provide a thermal break in cold weather climates
•Install a fixture at one or both faces of the wall
Solid Face
Panel set flush to inside
face of 2x6 wall
Wood
attaching
WINGand
TIPother
“SD” surface finishes
SELFFor
DRILLING
“SD”wood,
POINT siding, drywall
SELF#10
TAPPING
to the
or Brace Frame face
Flat or Wafer Head,
SELFPanel
TAPPING
self-tapping screws with a “Winged” self drilling (SD) point are
recommended. When connecting to the edge of Panels, use a
#12BUGLE
diameter
HEADscrew. WAFER HEAD
WING TIP “SD”
SELF TAPPING
SELF DRILLING “SD” POINT
SELF TAPPING
SELF DRILLING “SD”
POINT
FL ATBUGLE
TRUSS
TRUSS
HEAD
HEAD MODIFIED
SELF WAFER
TAPPING
WING TIP “SD”
SELF TAPPING
WING TIP “SD”
SELF TAPPING
BUGLE HEAD
WAFER HEAD
HEX HEAD
FL AT TRUSS MODIFIED TRUSS
Steel
WING
TIP “SD”
BUGLE
HEAD steel
HEAD
SELFWAFER
DRILLING
“SD”
POINT maximum)
When
attaching
connectors
(12-gage
fixtures,
electrical boxes, wire
SELF
TAPPING
SELF
TAPPING
mesh, etc. to the Panel or Brace Frame face #10 Hex, Flat Truss or Modified Truss
SELF DRILLING “SD” POINT
SELF TAPPING
FL AT TRUSS When
MODIFIED
TRUSS to the edge of
Head with a Self Drilling (SD) point are recommended.
connecting
HEX
HEAD
Panels, use a #12 diameter.
FL AT TRUSS
HEX HEAD
BUGLE HEAD
MODIFIED TRUSS
FL AT TRUSS
WAFER HEAD
HEX HEAD
SELF DRILLING “SD” POINT
MODIFIED TRUSS
SELF TAPPING
BUGLE HEAD
WING TIP “SD”
SELF TAPPING
WAFER HEAD
Additional Tools and Publications From Hardy Frames, Inc.
Typical Installation Detail Pages
Hardy Frames, Inc. provides our Typical Installation Details in plan
format. These pages are available in ACAD, pdf, or you may request
a hard copy directly from us. The pages are organized by bottom
connections, top connections and installations involving floor
systems. Any or all of these pages may be attached to your plans
as supplemental pages or you can copy selected details as needed.
Installation Guide
The Hardy Frame Installation Guide was written specifically for Suppliers and
Installers. This publication provides all HFX-Series model numbers, dimensions,
bolt and screw patterns, connectors, installation illustrations, attachments with
self-tapping screws and information regarding Template Kit (HFXTK) and Floor to
Floor Connector Kit (HFTC)components.
Moment Frame Catalog
Includes instructions for designing with Hardy Frame® Moment Frames,
allowable values, typical Installation details and a Non-Standard form for
submittal when project conditions require a custom design.
Braced Wall Guidelines
Provides a summary of Prescriptive Braced Wall
Design and recommends the most economical
solution with HFX-Series Panels. Includes
recommended model numbers, their Accessory items
and installation illustrations. Also see page 9 of Product Catalog.
The Z4 product line, including the Cinch Nut, CT and T2, are now a part
of the Hardy Frames, Inc. family. The Cinch Nut is a self ratcheting device
that is designed to maintain a tight connection in the Z4 continuous "Quick
TIE-DOWN SYSTEMS Connect" rod system. The Cinch Nut joins the CT and T2 to offer more
A MiTek Company design options than any other hold down system and are rated for Tension
capacities that range from 5,000 to 60,000 lbs. In addition to continuous rod applications, the T2 can be
used as a hold down in conventionally framed shear walls. info@zonefour.com
TIE-DOWN SYSTEMS
HARDY
™
FRAME
®
PRE-FABRICATED SHEAR WALL SYSTEMS
A M i Te k C o m p a n y
1732 Palma Dr., Suite 200, Ventura, California 93003 800 754-3030
HARDY
www.hardyframe.com
™
FRAME
PRE-FABRICATED SHEAR WALL SYSTEMS
®