2010 Shark - Shark Pressure Washers
Transcription
2010 Shark - Shark Pressure Washers
® 2010 Shark Pressure Washer Equipment Catalog 800.771.1881 www.KarcherShark.com ® 2010 shark Pressure Washer Catalog 800.771.1881 the Kärcher-shark advantage | reliable ruggedness and safety Rugged and Safe Pressure Washers: Kärcher-Shark offers nearly 100 commercial-grade, hot & cold water models built to last, yet affordably priced Shark’s reputation for ruggedness and safety is the result of more than 60 years of combined expertise fostered within the largest manufacturer of industrial pressure washers in North America. The 96 models of Shark pressure washers are backed by the strongest warranty in the cleaning equipment industry, including a limited lifetime warranty on the pressure washer frame and a 7-year warranty on the Kärcher pump. Most models are CETA performance-certified to insure that they perform with +/- 5% of their advertised specifications. The engineering and craftsmanship of the Shark pressure washer line are renowned thanks to the equipment’s simple design, durability from oversized components and many safety features. Among the most recent improvements is advanced seal technology in all high-pressure pumps (photo above). Plus most models are certified by Equipment Testing Laboratory (ETL) to the rigid UL-1776 safety standards for high-pressure cleaning equipment. cold Water | over 50 models | gas or electric powered | portable or stationary 6 Reasons: Why Shark cold water pressure washers are top value 1 Durable, triplex, oil-bath, Kärcher high-pressure pump, with three ceramic pistons and forged brass manifold, backed by a limited 7-year warranty 6 4 1 5 2 Rugged chassis with limited lifetime warranty is made of 10-gauge steel and painted with black wrinkle paint for all-weather resistance; chrome handles are now standard 3 Belt-drive units have notched V-belts and cast-iron pulleys to reduce belt slip- 3 2 page and extend pump life; plus easy-to-adjust belt tension with a single bolt 4 Reliable Honda engine on most models with a three-year limited warranty plus low-oil alert and silent-tone muffler 5 Safety thermal pump saver valve protects against hot-water damage by venting recirculated water 6 Pumps featuring new U-Seal Technology provide longer life than competitors’ pumps for lower cost-of-ownership hot Water | over 40 models | gas or electric powered | portable or stationary 5 Reasons: Why Shark hot water models are #1 in North America 1 Durable hot water coil made of 1/2-inch, Sch. 80 steel pipe and cold rolled for years of leak-free operation; with easy coil access design 1 2 Totally enclosed control panel with automatic thermostat, hour meter and burner 2 3 on/off switch 3 Rugged, triplex, oil-bath, Kärcher high-pressure pump, with three ceramic pis5 4 tons and forged brass manifold, backed by a limited 7-year warranty 4 Four vibration isolators mounted under the engine reduce vibration, wear and tear on components 5 All-steel chassis and frame with lifting point and limited lifetime warranty; painted with black wrinkle paint for all-weather protection Page 2 ® 2010 shark Pressure Washer Catalog 800.771.1881 new for 2010 from shark! TRS-2500: PG 14 Compact trailer package Rugged and affordable, easy to load and service, the TRS-2500 is great for construction companies, oil field operations, cleaning contractors, municipalities and more. Customizable with a broad selection of options and accessories, such as hose reels, electric or hydraulic brakes, additional utility rack, and more. Leaf-spring suspension up to 3,500 lbs • Swing-away hitch • 200-gal water tank NEW cold Water pressure washers for 2010! Hammerhead Series: PG 4 4 Value-priced cold-water gasoline units Competitively priced, feature-rich gasoline-powered cold-water pressure washers designed for quick off-the-floor sales. These models will appeal to aggressive rental and tool houses, Jan San distributors and paint stores. Honda engines • Durable steel frames • Comet BXD, Axial or crankcase pumps BRE: PG 8 Electric-powered, 5,000 PSI, cold-water units Electric-driven 5 GPM @ 5000 PSI cold-water units available in 230/3 phase and 460/3 phase. These are specialty machines used in the marine market for cleaning the bottom of boats or for the concrete industry for cleaning trucks, forms and handling equipment. 5 GPM @ 5,000 PSI • Roll cage frame with lifting beam • 20 HP industrial motor HE-Plus: PG 9 Wall mount, cold-water pressure washer Incorporating industrial features with a highly mobile design, the new HE+ wall mount unit is perfect for in-shop uses, such as maintenance rooms, labs, auto shops, golf courses and paint stores. Shown with optional wallmount bracket Remote on/off switch • Pressure controlled auto start/stop • Industrial motor New KÄrCHER FLOOR CARE PRODUCTS | wet / dry vacuums & industrial scrubbers & sweepers Kärcher Floor Care Equipment: PG 17 Wet/dry vacuums, industrial sweepers, scrubbers, air blowers and more Shark offers 4 wet/dry vacuum models available in 9-gallon capacity and up, air blowers, and industrial scrubbers and sweepers. Built with durable construction, these machines are perfect for warehouses, stadiums, hotels, property management, and more! Self cleaning filters • Low noise levels • Industrial strength Page 3 ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | gasoline Powered | direct-drive pump Hammerhead: Value-priced, high quality—quick off-the-floor sales S men uip Eq t Trade As so cia t n io mance Stan rfor da Pe rd s red To C factu lea nu ni ng Ma hark’s new gasoline-powered direct-drive models offer high performance features at a great value that appeals to both casual and professional users. Powered by reliable Honda engines, these models range from 160CC (5 HP) with axial pumps to 389CC (13 HP) with crankcase pumps. All units have tubed pneumatic tires and are ETL certified. Model Features • Steel frame with powder coat finish • 3-year frame warranty • Honda GC and GX engines • Industrial direct-drive crankcase pump on 6.5 & 13 HP units • Downstream detergent injection Order No. GPM PSI Engine / CC HP Pump Ship Wt DD-232337 1.107-104.0 2.3 2300 Honda GC / 160 5 Kärcher Axial 72 lbs DD-232336 1.107-103.0 2.3 2300 Honda GC / 160 5 Comet BXD 73 lbs DD-252737 1.107-106.0 2.5 2700 Honda GX / 196 6.5 Kärcher KG 99 lbs DD-383537 1.107-108.0 3.8 3500 Honda GX / 389 13 Kärcher KS 132 lbs Cleaning Equipment Trade Association Performance Certified TM Dimensions: 5 & 6.5HP units: 23”L x 22”W x 25”H 13HP unit: 36.5”L x 23.5”W x 30.5”H Call for information on pallets 7-year warranty on Triplex Crankcase pumps only DD-232336 & DD-232337 1-year warranty on Comet BXD and Kärcher Axial pumps DD-252737 DD-383537 men uip Eq t Trade As so T cia t hese Shark models are tough gasoline-powered directdrive cold water machines that deliver cleaning power of up to 3500 PSI. Built on compact sturdy steel frames, each unit features a dependable industrial-grade Honda engine, Kärcher crankcase pump, hose/gun rack, detergent injection, and tubed pneumatic tires. All models are ETL certified. n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma DG: Compact, but heavy-duty—our most popular direct-drive cold water unit s Performance Certified TM DG: Gasoline-powered, direct-drive Model Order No. GPM PSI Engine / CC HP Pump Ship Wt DG-232437 1.575-100.0 2.3 2400 Honda GX / 163 5.5 Kärcher KG 148 lbs DG-252737 1.575-101.0 2.5 2700 Honda GX / 196 6.5 Kärcher KG 155 lbs DG-303037 1.575-102.0 3.0 3000 Honda GX / 270 9 Kärcher KG 175 lbs DG-383537 1.575-104.0 3.8 3500 Honda GX / 389 13 Kärcher KS 180 lbs Dimensions: 35”L x 21”W x 24”H Kärcher Pump with larger, advanced U-Seal Technology Features • Chrome handles • Steel frame with powder coat finish • Commercial grade Honda GX engine • Cleaning power up to 3500 PSI • Industrial direct-drive Kärcher crankcase pump options [Field Installed] Part No. 9.801-026.0 Description E-Z Hose Reel Kit, 100 ft. Note: Hose not included with hose reel kit Page 4 ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | gasoline Powered | direct-drive pump RG: Gas-powered, residential-grade models offer economical alternative K ärcher-Shark offers a line of gas-powered, direct-drive cold water pressure washers designed for residential use. They are easy to use and transport. Model Order No. GPM+ PSI+ Engine / CC HP Pump Ship Wt RG-232637* 1.107-077.0 2.3 2600 Honda GCV / 160 5.5 Kärcher Axial 78 lbs RG-253017 1.107-080.0 2.5 3000 Subaru EX / 160 6 Kärcher Axial 79 lbs RG-253037 1.107-078.0 2.5 3000 Honda GC / 190 6 Kärcher Axial 77 lbs RG-364037 1.107-079.0 3.6 4000 Honda GX / 389 13 Kärcher Axial 144 lbs RG: Gasolinepowered, directdrive for residential use Features • Durable steel frame • Portable, easy to transport • Integrated chemical injection Dimensions: 5.5HP: 21”L x 23”W x 31”H; 6HP: 22”x23”x35”; 13HP: 37”x24”x31” * Vertical shaft pump + Performance certified to PWMA standard +/- 20% of advertised specifications K ä r c h e r c l a ss i c s e r i e s KG: Professional performance with German-engineered technology T his series of commercial-duty, gas-powered cold water pressure washers offers the ideal balance between professional performance and value. Powered by reliable Honda engines, all four models have Kärcher’s German-engineered, direct-drive maintenance-free axial pump, rugged steel frame with handtruck design, tubed pneumatic tires and 50’ of commercial-duty hose (9 and 13 HP models come with a 100 ft. hose reel). FREE Hose Reel on 9 & 13 HP Models KG: Gasoline-powered, direct-drive Features • Reliable Honda engines • Commercial-duty Kärcher axial pump with 5-year warranty • Reinforced upright steel frame • Unmatched value Model Order No. GPM PSI Engine / CC HP Pump Ship Wt KG-252437 1.575-105.0 2.5 2400 Honda GC / 160 5 Kärcher Axial 115 lbs KG-262637 1.575-106.0 2.6 2600 Honda GC / 190 6 Kärcher Axial 115 lbs KG-313137* 1.575-107.0 3.1 3100 Honda GX / 290 9 Kärcher Axial 175 lbs KG-403637* 1.575-108.0 4.0 3600 Honda GX / 389 13 Kärcher Axial 181 lbs * 9 and 13 HP units come standard with a 100 ft. hose reelDimensions: 22”L x 23”W x 35”H (42”H with hose reel) options [Field Installed] Part No. 9.103-055.0 While supplies last Description Non-pivoting hose reel, 100 ft. Note: Hose not included with hose reel kit Page 5 ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | gasoline Powered | belt-drive pump BG: Rugged, belt-drive cold water series built to work hard and last long O men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd BG: Gasoline-powered, belt-drive Features • Chrome handles • Powder coated steel chassis • Reliable Honda GX engine • Water volume up to 3.7 GPM • Industrial belt-drive crankcase pump Model Order No. GPM PSI Engine / CC HP Pump Ship Wt BG-282037* 1.575-150.0 2.8 2000 Honda / 163 5.5 Kärcher KD 155 lbs BG-252737* 1.575-151.0 2.5 2700 Honda / 196 6.5 Kärcher KD 163 lbs BG-303037 1.575-152.0 3.0 3000 Honda / 270 9 Kärcher KD 225 lbs s Performance Certified TM BG-373537 1.575-154.0 3.7 3500 Honda / 389 13 Kärcher KM 250 lbs BG-304037 1.575-155.0 3.0 4000 Honda / 389 13 Kärcher KM 250 lbs * Compact frame Dimensions: *5.5/6.5 HP: 37”L x 21”W x 24”H; 9/13 HP: 45”L x 26”W x 24”H options [Field Installed] Part No. 9.801-025.0 Shown with optional hose reel Description E-Z Hose Reel Kit, 100 ft. Note: Hose not included with hose reel kit BR: Extra-rugged pressure washer with cleaning power of up to 5000 PSI T hese Shark Series roll cage models are the most powerful units in our cold water line, with cleaning power of up to 5000 PSI. Protected by a rugged powder coated roll cage built of 11/4” steel pipe, the BR Cage units feature powerful Vanguard, Honda or Kohler engines, tri-plunger oil bath Kärcher pumps, 13-inch tubed pneumatic tires, and an extra rugged beltdrive assembly with notched V-belts and cast iron pulleys. All single- and double-axle models are ETL safety certified. BR, Double Axle: Gasolineor diesel-powered, belt-drive men uip Eq t Trade As so cia t Model Order No. BR-353237 1.575-204.0 BR-373537 GPM PSI Features • Rugged steel chassis & roll cage • Multiple engine alternatives • Cleaning power up to 5000 PSI • Electric start on dual-axle models • Industrial belt-drive crankcase pump • 13” tubed pneumatic tires Engine / CC HP Fuel mance Stan rfor da Pe rd Cleaning Equipment Trade Association s Performance Certified TM 3.5 3200 Honda / 389 13 Gas Kärcher KM 1 350 lbs 1.575-205.0 3.7 3500 Honda / 389 13 Gas Kärcher KM 1 350 lbs BR-404027 1.575-207.0 4.0 4000 Vanguard / 479 16 Gas Kärcher KM 2 470 lbs BR-405037E 1.575-200.0 4.0 5000 Honda / 614 20E* Gas Kärcher KH 2 495 lbs BR-455037E 1.575-201.0 4.5 5000 Honda / 670 24E* Gas Kärcher KH 2 500 lbs BR-343067E 1.575-202.0 3.4 3000 Kohler / 401 9.8E* Diesel Kärcher KM 2 410 lbs Dimensions: Single Axle: 42”L x 26”W x 30”H; Double Axle: 42”L x 26”W x 36”H See trailer mounting options on page 15 BR, Single Axles: Gasolinepowered, belt-drive Pump Axles Ship Wt n io red To C factu lea nu ni ng Ma red To C factu lea nu ni ng Ma ur Shark cold-water belt-drive series provides a broad selection of rugged belt-drive units, all with reliable Honda GX engines, which deliver cleaning volume of up to 3.7 GPM. Each model is ETL certified to UL-1776 safety standards and comes with a rugged steel chassis, cast iron belt pulley system, tubed pneumatic tires, and industrial-grade Kärcher crankcase pump with 7-year warranty. *E = Electric Start; Battery not included. options [Field Installed] Part No. 9.801-028.0 Description E-Z Hose Reel Kit, 100 ft., single axle Note: Hose not included with hose reel kit Page 6 Part No. 9.801-029.0 Description Rapid Reel Hose Reel Kit, 100 ft., 5000 psi, double axle ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | electric or Gas Powered | direct-drive pump HE & CD: Lightweight, hand-held models are gas- or electric-powered T hese light-industrial hand held units are significantly more rugged than typical homeowner substitutes and come with durable steel frames, dependable axial pump, high pressure hose, stainless steel wand and soap injection. men uip Eq t Trade As so mance Stan rfor da Pe rd Cleaning Equipment Trade Association Order No. GPM PSI Motor HP Electrical Amps HE-201006D 1.575-400.0 2.0 1000 1.5 120V / 1ph 15 Comet Axial+ 80 lbs HE-201406D 1.575-401.0 1.8 1400 2 120V / 1ph 20 Comet Axial+ Dimensions: 16”L x 24”W x 22”H cia t n io red To C factu lea nu ni ng Ma HE: Electric-powered Model Features • Durable steel frame • Axial pump on most models • Portable, easy to transport Pump Ship Wt 95 lbs s Performance Certified TM CD: Gasolinepowered Model Order No. GPM PSI Engine / CC HP Pump Ship Wt CD-232336 1.575-351.0 2.3 2300 Honda GC / 160 5 Kärcher Axial** 70 lbs CD-232437 1.575-350.0 2.3 2400 Honda GX / 163 5.5 Kärcher KG* 80 lbs Dimensions: 16”L x 24”W x 22”H * KG Pump comes with 7-year warranty **Kärcher axial pump comes with a 5-year warranty + Comet AXD pump comes with a 2-year warranty Kärcher classic series men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma KE: European-style models offer ergonomic design and total trigger shutoff s Performance Certified TM K ärcher offers three Classic Series electric-powered cold water pressure washers with the highly innovative German engineering, such as a patented direct-drive pump, ergonomic trigger gun, complete shutoff at the trigger gun, and a triple changeover nozzle for easy altering of the spray pattern. KE-231407D KE-302007A Order No. GPM PSI KE-181307D Model 1.514-111.0 1.8 1300 KE-231507D KE-231407D* Features • Compact, ergonomic design • Low-pressure soap injection system • Complete trigger shut off • Triple changeover nozzle Motor HP Electrical Amps Pump Ship Wt 2.2 120V / 1ph 15 Kärcher Axial 65 lbs 1.150-611.0 1.1-2.3 300-1500 3.2 120V / 1ph 20 Kärcher Axial 75 lbs 1.150-614.0 1.1-2.3 300-1400 3.2 120V / 1ph 20 Kärcher Axial 75 lbs * Designed for food service or kitchen applications because it accepts hot water of up to 180°F Dimensions: 15”L x 14”W x 37”H Page 7 ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | electric Powered | belt or direct-drive pump DE: Electric-powered units have zero emissions—ideal for indoor cleaning men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association Features • Chrome handles • Steel frame and chassis protected by powder coat finish • Direct-drive Kärcher crankcase pump • Available in 120V and 230V • ETL certified to UL and CSA standards mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma O ur electric-powered DE machines are durable directdrive units that deliver cleaning volume up to 3.5 GPM. Powered by heavy-duty industrial-grade Baldor motors, these compact units feature tri-plunger oil bath pumps, powder coated steel chassis, hose hanger, detergent injection, insulated guns and wands, and tubed pneumatic tires. All models are ETL certified to UL and CSA safety standards. s Performance Certified TM DE: Electric-powered, direct-drive Model Order No. GPM PSI Motor HP Electrical Amps Pump Ship Wt DE-201007D 1.575-250.0 2.0 1000 1.5 120V / 1ph 15 Kärcher KE 140 lbs DE-201507D 1.575-251.0 1.9 1300 2 120V / 1ph 20 Kärcher KE 150 lbs DE-301007D 1.575-252.0 2.8 1000 2 120V / 1ph 20 Kärcher KE 150 lbs DE-352007A 1.575-253.0 3.5 2000 5 230V / 1ph 22 Kärcher KE 167 lbs Dimensions: 35”L x 21”W x 24”H options [Field Installed] Part No. 9.801-027.0 Description E-Z Hose Reel Kit, 100 ft. Note: Hose not included with hose reel kit BRE: Electric-driven 5 GPM at 5000 PSI cold-water blasters T hese new Shark Series roll cage models feature cleaning power of 5000 PSI and are available with either 230/3 phase or 460/3 phase. These units are specialty machines perfect for use in the marine market cleaning the bottom of boats or in the concrete industry for cleaning trucks, forms and handling equipment. Hoses, wands, guns and fittings are highpressure rated and both models are ETL safety certified. men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma s Performance Certified TM BRE, Electric-powered, specialty machine Features • Rugged steel chassis & roll cage • Belt-drive crankcase pump • Cleaning power of 5000 PSI • 50’ high-pressure hose • 20 HP Baldor motor • 13” tubed pneumatic tires Model Order No. GPM PSI Motor HP Electrical Amps Pump Ship Wt BRE-505007B 1.107-084.0 5 5000 20 230V / 3ph 48 Kärcher KH 480 lbs BRE-505007C 1.107-087.0 5000 20 460V / 3ph 26 Kärcher KH 480 lbs Dimensions: 42”L x 26”W x 30”H 5 options [Field Installed] Part No. 9.801-029.0 Description Rapid Reel Hose Reel Kit, 100 ft., 5000 psi Note: Hose not included with hose reel kit Page 8 ® 2010 shark Pressure Washer Catalog 800.771.1881 cold Water | electric Powered | belt or direct-drive pump HE+: Electric-powered wall mount unit ideal for in-shop uses S HE+: Electric-powered with optional wall mount bracket: 8.903-613.0 hark’s new wall mount unit has a durable steel frame, amazingly quiet 1725 RPM motor, and is perfect for in-shop uses. A remote on/off switch with a 10’ electrical cord allows the machine to be mounted high on a wall away from backspray. ETL certified to UL and CSA safety standards. Model Order No. GPM PSI HE-201407D+ 1.107-088.0 1.8 1400 Features • Accepts hot water up to 180o • Remote on/off switch • Triplex crankcase pump • Pressure controlled auto start/stop safety feature • Reliable industrial motor Motor HP Electrical 2 Amps 120V / 1ph 20 Pump Ship Wt Kärcher KE 120 lbs options men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma HE+: Electric-powered Part No. 8.903-613.0 Description Wall mount bracket s Performance Certified TM CB: Electric-powered cabinet unit ideal for kitchens and wash bays O ur cold-water cabinet units really take the heat, accepting heated water up to 180°F. Protected in durable steel cabinets, they demonstrate industrial strength throughout, including belt-drive Kärcher crankcase pumps, industrial Baldor motors, and magnetic starters for operator safety. All models are ETL certified to UL and CSA safety standards. men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma CB: Electricpowered, belt-drive s Performance Certified TM Wheel Kit with detergent rack and optional hose reel Features • Accept hot water up to 180°F • Powder coated steel cabinets • Belt-drive pump w/ 7-year warranty • Available in 120V, 208V, 230V, 460V Model Order No. GPM PSI HP Electrical Amps Pump Ship Wt CB-301007D 1.575-300.0 2.8 1000 2 120V / 1ph 20 Kärcher KD 210 lbs CB-402007A 1.575-301.0 4.2 2000 6 230V / 1ph 29 Kärcher KM 285 lbs CB-402007B 1.575-302.0 4.2 2000 6 230V / 3ph 19 Kärcher KM 255 lbs CB-402007C 1.575-303.0 4.2 2000 6 460V / 3ph 11 Kärcher KM 260 lbs CB-402007H 1.575-305.0 4.2 2000 6 208V / 3ph 16 Kärcher KM 265 lbs CB-353007A 1.575-306.0 3.5 3000 7.5 230V / 1ph 36 Kärcher KM 330 lbs CB-353007B 1.575-307.0 3.5 3000 7.5 230V / 3ph 19 Kärcher KM 275 lbs CB-353007C 1.575-308.0 3.5 3000 7.5 460V / 3ph 11 Kärcher KM 270 lbs CB-353007G 1.575-309.0 3.5 3000 7.5 208V / 1ph 38 Kärcher KM 332 lbs CB-353007H 1.575-310.0 3.5 3000 7.5 208V / 3ph 23 Kärcher KM 271 lbs Dimensions: 26”L x 20”W x 16”H options [Field Installed] Stainless steel unit shown on floor stand with caster wheels Part No. 9.801-002.0* 9.801-011.0* 9.801-012.0* 9.801-013.0* 9.801-031.0 9.801-033.0 8.903-043.0 8.941-546.0 Description Conversion to Stainless Steel Cabinet & Cover Auto Start Stop Time-Delay Shutdown Hour Meter Wheel Kit with Detergent Rack Wall Mount Kit Stainless Steel Wall Mount Kit Stainless Steel Floor Stand, No Bracket * Factory installed only **Hose not included Page 9 Part No. 8.903-040.0 9.801-034.0 8.903-617.0 8.941-546.0 9.801-035.0 9.801-036.0 8.903-521.0 9.802-265.0 8.903-039.0 Description Floor Stand, 24” Tall Floor Stand, 36” Tall Stainless Steel Floor Stand, 36” Tall Stainless Steel Floor Stand w/o Hose Reel Bracket Caster Wheels for Floor Stand Hose Reel Kit, Floor Stand Only, 100 ft.** Hose Reel, For Wheel Kit, 100 ft.** Hose Reel Kit (Cox), Wall Mount, 100 ft.** Hose Reel Kit w/ Bracket for Stand, Wall Mount Kits, 100 ft.** ® 2010 shark Pressure Washer Catalog 800.771.1881 hot Water | gasoline Powered | diesel heated SGP: Portable, self-contained hot water pressure washer—our #1 seller men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma T hese portable gas-powered hot water units are built using heavy-duty components and rugged steel chassis to withstand the most rigorous conditions. Their compact frame design and tubed pneumatic wheels provide easy maneuvering in all terrains. Each unit is ETL certified and comes with a leak free Schedule 80 heating coil surrounded by a standard stainless steel wrap. Features • Direct-drive pump • Stainless steel coil wrap standard • Rugged frame with powder finish • Tubed pneumatic tires • Schedule 80 heating coil • Hour meter comes standard • ETL certified to UL & CSA Standards Pump s Performance Certified TM SGP Compact Design: 6 and 7 HP Gas-powered, diesel/oil-heated See trailer mounting options on page 15 Model Order No. GPM PSI Engine / CC HP Start Burner BTUs Ship Wt SGP-302017 1.575-554.0 2.5 2000 Subaru / 169 6 Recoil Kärcher KG 12V DC 233,000 390 lbs SGP-302517 1.575-555.0 2.7 2400 Subaru / 211 7 Recoil Kärcher KG 12V DC 252,000 400 lbs SGP-303037 1.575-550.0 2.6 3000 Honda / 270 9 Recoil Kärcher KG 12V DC 280,000 500 lbs SGP-353037 1.575-551.0 3.5 3000 Honda / 337 11 Recoil Kärcher KS 12V DC 326,000 550 lbs SGP-353037E 1.575-552.0 3.5 3000 Honda / 337 11E* Electric Kärcher KS 12V DC 326,000 560 lbs SGP-403537E 1.575-553.0 3.5 3500 Honda / 389 13E* Electric Kärcher KS 12V DC 326,000 595 lbs Dimensions: Full-size 46”L x 28”W x 44”H • Compact 39”L x 28”W x 42”H * E = Electric start engine; Battery included on 13 HP model only men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd Performance Certified s SGP Full-Size Cage Design: Gas-powered, diesel/oil-heated red To C factu lea nu ni ng Ma options [Field Installed] TM Part No. 9.801-024.0 9.804-570.0 Description E-Z Hose Reel Kit, 100 ft. Hose Reel Kit, Pivot, 100 ft. Note: Hose not included with hose reel kit SSG: Our most rugged hot model designed for continuous, on-site cleaning S SSG Skid: Gasolinepowered, diesel/oil-heated men uip Eq t Trade As so hark Series oil-fired skids are the workhorses of the pressure washer industry. Delivering up to 5.6 GPM of hot water at up to 3500 PSI, these rugged gas- and diesel-powered machines are built on an open frame using heavygauge 11/4” powder coated steel and are ideal for mounting to a truck or on a trailer. The electric-start engine and powerful belt-drive Kärcher KT pump are isolated from the rest of the machine on a shock-mounted sub-frame to reduce vibration. Steam combination comes standard with all models. Pair it with a Shark trailer for a mobile wash solution to on-site cleaning - see pages 14-16 for details on trailers. Order No. GPM PSI Engine / CC HP SSG-403037E 1.575-600.0 3.9 3000 Honda / 389 13E* Gas Kärcher KT 12V DC 448,000 805 lbs SSG-503027E 1.575-601.0 4.8 3000 Vanguard / 479 16E* Gas Kärcher KT 12V DC 448,000 854 lbs SSG-503027E/G 1.575-602.0 4.8 3000 Vanguard /479 16E* Gas Kärcher KT 120V AC 448,000 945 lbs 1.575-603.0 4.7 3500 Honda / 614 20E* Gas Kärcher KT 12V DC 448,000 855 lbs SSG-503537E/G 1.575-604.0 4.7 3500 Honda / 614 20E* Gas Kärcher KT 120V AC 448,000 905 lbs SSG-603537E 1.575-605.0 5.6 3500 Honda / 670 24E* Gas Kärcher KT 12V DC 448,000 852 lbs Part No. Description 9.801-003.0 Wheel Kit Assembly** 8.903-430.0 Stackless Flue Adapter SSG-603537E/G 1.575-606.0 5.6 3500 Honda / 670 24E* Gas Kärcher KT 120V AC 448,000 970 lbs SSD-603567E 1.575-609.0 5.6 3500 Kohler / 1028 27E* Diesel Kärcher KT 12V DC 448,000 1200 lbs 8.904-051.0 Battery Installed* (20 & 24 HP models only) SSD-603567E/G 1.575-610.0 5.6 3500 Kohler / 1028 27E* Diesel Kärcher KT 120V AC 448,000 1315 lbs cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma Fuel Pump Burner BTUs Ship Wt s Performance Certified Model Features • Honda, Vanguard, Kohler engines • 11/4” full steel skid frame • Burner available in 12V DC or 120V AC • Kärcher belt-drive tri-plunger pumps • 1/2” Schedule 80 heating coil • ETL safety certified • Stainless steel coil wrap • Power generator on four models TM See trailer mounting options on page 14 SSG-503537E Shown with optional wheel kit options [Field Installed] *Factory installed *Gas-engine models only * E = Electric start engine; battery not included Machine Dimensions: Gas-powered 41”L x 41”W x 41”H; Diesel-powered 44”L x 51”W x 41”H Page 10 ® 2010 shark Pressure Washer Catalog 800.771.1881 hot Water | electric Powered | diesel heated STP: Electric-powered hot water pressure washer is compact and portable B uilt on a rugged 11/4” powder coated steel frame, these compact electric roll cage models are designed for construction sites, farms and factories where electricity is available. The three models deliver hot water cleaning of up to 2000 PSI using 120V or 230V/1ph. Each features a Kärcher direct-drive crankcase-style pump with 7-year warranty, industrial-grade Baldor motor and 1/2” Schedule 80 heating coil. t Trade As so Model Order No. GPM PSI HP Electrical Amps Pump BTUs Ship Wt STP-231007D 1.575-511.0 2.1 1000 1.5 120V / 1 ph 15 Kärcher KE 196,000 480 lbs STP-201507D 1.575-512.0 1.9 1500 2 120V / 1 ph 20 Kärcher KE 177,500 480 lbs 3.5 2000 5 230V / 1 ph 22 Kärcher KE 326,000 500 lbs cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma men uip Eq Features • Available in 120V and 230V • Direct-drive crankcase style pumps • Stainless steel coil wrap standard • Oil-water separator and hour meter • 1725 RPM motors on 1.5-2 HP models s Performance Certified TM STP: Electric-powered, diesel/oil-heated STP-352007A 1.575-513.0 Dimensions: 39”L x 27”W x 44”H options [Field Installed] Part No. 9.801-024.0 Description E-Z Hose Reel Kit, 100 ft. Part No. 9.804-570.0 Description Hose Reel Kit, Pivot, 100 ft. Note: Hose not included with hose reel kit men uip Eq t Trade As so S hark offers 9 North American models with their unique handtruck design, all-metal frame, heavy-duty vertical heating coil with stainless steel wrap, water-resistant control box and tubed pneumatic tires. Units come with directdrive or belt-drive Kärcher crankcase pumps. All are ETL certified to UL and CSA safety standards. cia t n io mance Stan rfor da Pe rd s red To C factu lea nu ni ng Ma HPB: Handtruck-style hot water series offers ruggedness and affordability Cleaning Equipment Trade Association Performance Certified TM Model Order No. GPM PSI HP t Trade As so cia t Pump BTUs Ship Wt Direct Kärcher KE 187,000 368 lbs HPB-201407D 1.575-501.0 2.0 1400 2 120V / 1 ph 20 Direct Kärcher KE 187,000 400 lbs HPB-251007D 1.575-502.0 2.5 1000 2 120V / 1 ph 20 Direct Kärcher KE 280,000 486 lbs HPB-251607A 1.575-503.0 2.5 1600 3 230V / 1 ph 18 Direct Kärcher KE 234,000 490 lbs HPB-352007A 1.575-504.0 3.5 2000 5 230V / 1 ph 23 Direct Kärcher KE 350,000 475 lbs HPB-392007A 1.575-505.0 3.9 2000 6 230V / 1 ph 29 Belt Kärcher KM 365,000 660 lbs HPB-353007A 1.575-508.0 3.5 3000 7.5 230V / 1 ph 36 Belt Kärcher KM 327,000 690 lbs HPB-353007B 1.575-509.0 3.5 3000 7.5 230V / 3 ph 25 Belt Kärcher KM 327,000 605 lbs HPB-353007C 1.575-510.0 3.5 3000 7.5 460V / 3 ph 13 Belt Kärcher KM 327,000 605 lbs n io mance Stan rfor da Pe rd s red To C factu lea nu ni ng Ma men uip Eq • Available in 120V, 230V and 460V • Belt- or direct-drive Kärcher pump • 1/2-inch Schedule 80 heating coil • Stainless steel coil wrap standard Electrical Amps Drive HPB-201107D* 1.575-500.0 2.0 1000 1.5 120V / 1 ph 20 HPB Compact: 1.5 & 2.0 HP Electric-powered, diesel/oilheated Features Cleaning Equipment Trade Association Performance Certified TM * Does not accept options listed belowDimensions: 1.5HP 31”L x 23”W x 40”H • 2-5HP 28”L x 28”W x 43”H • 6-7.5HP 41”L x 32”W x 44”H options [Factory Installed] HPB Full-Size: Electricpowered, diesel/oil-heated Part No. 9.801-007.0 9.801-008.0 9.801-041.0 9.801-005.0 9.801-006.0 9.801-046.0 9.804-512.0 9.804-513.0 9.804-514.0 Description Hour Meter Float Tank (6 - 7.5 HP units, with soap valve) Fuel Filter / Water Separator Auto Start/Stop (2 - 5 HP models)* Auto Start/Stop (6 - 7.5 HP models)* Auto Start/Stop & Steam Combo (2 - 5 HP)* Auto Start/Stop & Steam Combo (6 - 7.5 HP)* Auto Start/Stop & Float Tank (6 - 7.5 HP)* Auto Start/Stop, Steam & Float Tank (6 - 7.5 HP)* Page 11 Part No. 9.801-045.0 9.804-515.0 9.801-009.0 9.801-000.0 9.801-001.0 9.801-023.0 Description Steam Combination (2-5 HP models) Steam Combination (6-7 HP, if w/ float tank) Steam Combination (6-7 HP, if no float tank) Time Delay Shutdown (2 - 5 HP models)* Time Delay Shutdown (6 - 7.5 HP models)* E-Z Hose Reel Kit, 100 ft.; no hose** * Time Delay Shutdown and Auto Start/Stop are mutually exclusive ** Field installed only ® 2010 shark Pressure Washer Catalog 800.771.1881 hot Water | electric Powered | diesel heated men uip Eq t Trade As so F or customers with AC current available on the job site, our Shark Series electric skid models are an attractive alternative to gas-powered units. Models come with all the industrial ruggedness of our gasoline series and are built with an open design on a 11/4” powder-coated steel frame. The powerful Kärcher belt-drive crankcase pump and Baldor motor are isolated from the rest of the machine on a shock-mounted sub-frame to reduce vibration. cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma SSE: Rugged electric-powered skid offers affordable alternative to gasoline s Performance Certified TM SSE: Electric-powered, diesel/oil-heated Model Order No. GPM PSI HP Electrical Features • Electric powered, 230V and 460V • 1/2” Schedule 80 heating coil • Belt-drive Kärcher crankcase pump • Rugged steel frame with shockmounted sub-frame to reduce vibration • ETL certified to stringent UL and CSA safety standards Amps Drive Pump BTUs Ship Wt SSE-503007A 1.575-620.0 4.8 3000 10 230V / 1 ph 45 Belt Kärcher KT 446,000 900 lbs SSE-503007B 1.575-621.0 4.8 3000 10 230V / 3 ph 30 Belt Kärcher KT 446,000 830 lbs SSE-503007C 1.575-622.0 4.8 3000 10 16 Belt Kärcher KT 446,000 820 lbs 460V / 3 ph Dimensions: 41”L x 41”W x 41”H options [Field Installed] Part No. 9.801-003.0 8.903-430.0 Description Wheel Kit Assembly Stackless Flue Adapter hot Water | electric Powered | electric heated men uip Eq t Trade As so T cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma EEC: All-Electric units ideal for on-demand, indoor cleaning with hot water s Performance Certified TM his Shark Series all-electric hot water pressure washer introduces hot-water tank technology to deliver hot water on demand ideal for indoor cleaning. Water is heated by flowing through a coil inside an 80-gallon water tank. Nine 4500W heating elements generate 138,000 BTU to produce hot water of up to 180°F. Both models are ETL certified. Features • Quiet, enviro-clean and user friendly • Rust-free stainless steel coil enhances high-efficiency heat transfer • Auto start-stop for on-demand cleaning • Belt-drive pump with 7-year warranty Model Order No. GPM PSI HP Electrical Amps Pump Ship Wt EEC-422007C 1.109-075.0 4.2 2000 6.2 460V / 3ph 55 Kärcher KM 640 lbs EEC-353007C 1.109-076.0 3.5 3000 7.5 460V / 3ph 59 Kärcher KM 640 lbs Dimensions: 32”L x 24”W x 52”H EEC: All-electric hot water options [Factory Installed] Part No. 9.801-012.0 Description Time-Delay Shutdown* *Replaces Auto start-stop Part No. 9.801-002.0 Page 12 Description Pressure Washer Stainless Steel Cabinet ® 2010 shark Pressure Washer Catalog 800.771.1881 hot Water | electric Powered | natural gas or lp heated HNG: Cabinet-style hot water series with optional multi-gun operation men uip Eq t Trade As so cia t n io Cleaning Equipment Trade Association mance Stan rfor da Pe rd red To C factu lea nu ni ng Ma F or indoor cleaning with hot water, our Shark Series natural gas and propane gas models are ideal. They pack cleaning power of up to 3000 PSI and yet fit within a small footprint. Powered by electricity and heated by natural gas or liquid propane, all 10 models are driven by industrial belt-drive high-pressure Kärcher crank-style pumps and feature Schedule 80 heating coils. Model Order No. GPM PSI HP Electrical Amps Pump BTU Ship Wt HNG-352007A 1.575-701.0 3.5 2000 5 230V / 1 ph 22 Kärcher KD 353,125 760 lbs HNG-402007A 1.575-702.0 3.9 2000 6.2 230V / 1 ph 29 Kärcher KM 407,754 801 lbs HNG-502007A 1.575-705.0 5.0 2000 8.2 230V / 1 ph 36 Kärcher KM 478,134 844 lbs HNG-502007B 1.575-706.0 5.0 2000 7.5 230V / 3 ph 25 Kärcher KM 478,134 814 lbs HNG-502007C 1.575-707.0 5.0 2000 7.5 460V / 3 ph 13 Kärcher KM 478,134 795 lbs HNG-353007A 1.575-708.0 3.5 3000 8.2 230V / 1 ph 36 Kärcher KM 353,125 835 lbs HNG-353007B 1.575-709.0 3.5 3000 7.5 230V / 3 ph 25 Kärcher KM 353,125 810 lbs HNG-503007B 1.575-711.0 4.8 3000 10 230V / 3 ph 28 Kärcher KM 455,883 810 lbs HNG-503007C 1.575-712.0 4.8 3000 10 460V / 3 ph 15 Kärcher KM 455,883 823 lbs HNG-503007F 1.575-713.0 4.8 3000 10 575V / 3 ph 13 Kärcher KM 455,883 817 lbs s Performance Certified Features • Available in 230V, 460V and 575V • High-efficiency burner with standing pilot • Industrial belt-drive crankcase pump • 1/2” Schedule 80 heating coil • Enclosed cabinet with powder coat finish TM HNG: Electric-powered, natural gas/LP-heated Dimensions: 44”L x 28”W x 49”H options [Factory Installed] Part No. Description Part No. Description 9.801-014.0 Electronic Ignition 9.801-017.0 Remote, One Station, Time Delay Shutdown 9.801-015.0 Time Delay Shutdown 9.801-018.0 Remote, One Station, Auto Start Stop 9.801-038.0 Auto Start / Stop Control 9.801-021.0 Extra Remote Box with Time Delay Shutdown 9.801-042.0 Convert Natural Gas to LP Gas (millivolt units) 9.801-022.0 Extra Remote Box with Auto Start Stop 9.801-019.0 Convert Natural Gas to LP Gas (electric units) 9.801-039.0 Stainless Steel Wrap and Cabinet Cover 9.801-020.0 Steam Combination 9.801-032.0* Wheel Kit with LP Bottle Rack 9.801-016.0 Remote, One Station 9.801-040.0* 10-Inch Draft Diverter 9.802-633.0* LP Regulator Assembly * Field installed only heater attachment | electric Powered | diesel heated HP HEATER: Turns a cold water pressure washer into a hot water unit O ur Shark Series water heater provides supplemental heat to cold water machines, giving users the benefits of hot water cleaning when it’s needed. An electric-powered diesel heated unit, the Heater 5.0/30 Ed effectively heats water at a rate of up to 5 gallons per minute. HP Heating Module: Diesel/oil-heated Model Order No. HP-5030D 1.575-650.0 GPM PSI Electrical Up to 5.0 Up to 3000 120V / 1ph Dimensions: 29”L x 41”W x 47”H Page 13 Features • Leak-free steel-pipe heating coil • Effective heating of up to 5 GPM • ETL certified to UL & CSA standards • High-efficiency design for low operating costs Amps Heated By 5 Diesel BTUs Ship Wt 300,000 320 lbs ® 2010 shark Pressure Washer Catalog 800.771.1881 mobile wash systems | customized packages for the professional cleaner NEW TRS-2500: New, flexible design accomodates different size pressure washers (HW skid, medium size hot-water, cold-water blaster) Applications: Rental Yards • Construction • Mines • Marine • Municipalities • Oil Fields • And More! 3-way ball valve for easy switching of the water flow from the holding tank to a faucet High-density, polyethylene 200-gallon water tank with a 12-inch access port, 11/2-inch drain valve, 3/4-inch float valve and a 50-mesh inlet filter Optional hose reels NO ASSEMBLY REQUIRED! Swing-away hitch saves on storage space (hoses on reels field installed) Optional saddle box Battery box Optional utility rack Leaf-spring suspension rated up to 3,500 lbs 1,000 lb. swivel jack with a 2-inch ball coupler for quick and easy hook up of the trailer Lighted license plate holder and recessed tail lights TRS-2500 Shown with optional SSG hot water pressure washer, hose reels, utility rack, and saddle box options Two 5/16-inch chains for additional safety Electrical wiring recessed within tubular frame Model Order No. Axle Load Capacity Water Tank Ship Weight TRS-2500* 1.103-819.0 Single 3500 lbs 200 gallon 1072 lbs Dimensions: 136”L x 66”W x 52”H if purchased with these skids... Model Description Belt-drive models SSG-403037E 3.9 GPM @ 3,000 PSI, 13 HP, GAS, 12V DC Burner SSG-503027E 4.8 GPM @ 3,000 PSI, 16 HP, GAS, 12V DC Burner SSG-503027E/G 4.8 GPM @ 3,000 PSI, 16 HP, GAS, 120V AC Burner SSG-503537E 4.7 GPM @ 3,500 PSI, 20 HP, Gas, 12V DC Burner SSG-503537E/G 4.7 GPM @ 3,500 PSI, 20 HP, Gas, 120V AC Burner SSG-603537E 5.6 GPM @ 3,500 PSI, 24 HP, Gas, 12V DC Burner SSG-603537E/G 5.6 GPM @ 3,500 PSI, 24 HP, Gas, 120V AC Burner SEE PAGE 10 FOR DETAILS ON SKIDS *Trailer and water tank only available options are... Part No. Description mounting kit (Required for Mounting Pressure Washer to Trailer) 8.917-294.0 SSG Skid Mounting Kit battery 8.904-051.0 Battery Installed On Pressure Washer FIELD INSTALLED 8.917-558.0 Saddle Box (Ea) 8.917-559.0 Rock Guard 8.917-560.0 Utility Rack FACTORY INSTALLED 8.917-397.0 Electric Brakes 8.917-553.0 Electric Brake Breakaway Kit 8.917-398.0 Hydraulic Brakes 8.917-554.0 High-Pressure Hose Reel 8.917-555.0 Low-Pressure Hose Reel 8.917-556.0 Saddle Boxes (2) 8.917-557.0 Rock Guard Page 14 ® 2010 shark Pressure Washer Catalog 800.771.1881 mobile wash systems | customized packages for the professional cleaner NEW TRS-2500 Cont: Pair the TRS-2500 with Shark’s medium-size SGP hot-water pressure washer applications... if purchased with these skids... Rental Yards • Construction • Mines • Marine Municipalities • Oil Fields • And More! Model Description direct-drive models SGP-403537E 3.5 GPM @ 3,500 PSI, 13E* HP, Electric, 12V DC Burner *Electric start engine, battery included. SEE PAGE 10 FOR DETAILS ON SKID available options are... Part No. TRS-2500 Shown with optional SGP hot water pressure washer, hose reels, utility rack, saddle boxes and rock guard options Description mounting kit (Required for Mounting Pressure Washer to Trailer) 8.917-295.0 SGP Mounting Kit FIELD INSTALLED 8.917-558.0 Saddle Box (Ea) 8.917-559.0 Rock Guard 8.917-560.0 Utility Rack FACTORY INSTALLED 8.917-397.0 Electric Brakes 8.917-553.0 Electric Brake Breakaway Kit 8.917-398.0 Hydraulic Brakes 8.917-554.0 High-Pressure Hose Reel 8.917-555.0 Low-Pressure Hose Reel 8.917-556.0 Saddle Boxes (2) 8.917-557.0 Rock Guard Pair the TRS-2500 with Shark’s cold-water, belt-drive pressure washer applications... if purchased with these skids... Municipalities • Rental Yards • Construction Property Management • Contract Cleaners • And More! Model Description COLD WATER BELT-drive models BR-373537 3.7 GPM @ 3,500 PSI, 13 HP, Gas available options are... Part No. TRS-2500 Shown with optional BR-373537 cold-water pressure washer and hose reel options Description mounting kit (Required for Mounting Pressure Washer to Trailer) 8.917-296.0 BR-373537 Mounting Kit FIELD INSTALLED 8.917-558.0 Saddle Box (Ea) 8.917-559.0 Rock Guard 8.917-560.0 Utility Rack FACTORY INSTALLED 8.917-397.0 Electric Brakes 8.917-553.0 Electric Brake Breakaway Kit 8.917-398.0 Hydraulic Brakes 8.917-554.0 High-Pressure Hose Reel 8.917-555.0 Low-Pressure Hose Reel 8.917-556.0 Saddle Boxes (2) 8.917-557.0 Rock Guard Page 15 ® 2010 shark Pressure Washer Catalog 800.771.1881 mobile wash systems | customized packages for the professional cleaner TRS-3500: TRS-3500 options [Factory Installed] Part No. D esigned for hot-water skid, the TRS-3500 features a rugged, protective chassis design making this heavy-duty singleaxle trailer perfect for use on busy construction sites. TRS-3500 Shown with options and gasolinepowered hot water pressure washer; accommodates gasoline-powered pressure washers only TRS-3500 applications: • Construction • Mines • Oil Fields • Rental Yards • And More! compatible skids: (see page 10) SSG-403037E, SSG-503027E, SSG-503017E/G, SSG-503537E, SSG-503537E/G, SSD-603537E, SSD-603537E/G, 3.9 GPM @ 3,000 PSI 4.8 GPM @ 3,000 PSI 4.8 GPM @ 3,000 PSI 4.7 GPM @ 3,500 PSI 4.7 GPM @ 3,500 PSI 5.6 GPM @ 3,500 PSI 5.6 GPM @ 3,500 PSI TRS-6000: T he TRS-6000 trailer’s rugged, heavy-duty double-axle design with 330-gallon water tank allows for long run times making it perfect for cleaning jobs that are far from a convenient water source. TRS-6000 Shown with options and gas-powered hot water pressure washer; accommodates both gasoline- and diesel-powered pressure washers TRS-6000 applications: • Construction • Mines • Oil Fields • Quarries • And More! compatible skids: (see page 10) SSG-403037E, SSG-503027E, SSG-503017E/G, SSG-503537E, SSG-503537E/G, SSD-603537E, SSD-603537E/G, Model Order No. TRS-3500* TRS-6000* 3.9 GPM @ 3,000 PSI 4.8 GPM @ 3,000 PSI 4.8 GPM @ 3,000 PSI 4.7 GPM @ 3,500 PSI 4.7 GPM @ 3,500 PSI 5.6 GPM @ 3,500 PSI 5.6 GPM @ 3,500 PSI Description battery 8.904-051.0 Battery Installed On Pressure Washer BRAKE: ELECTRIC brake OPTIONS 8.902-440.0 Electric Brake, TRS-3500 8.902-436.0 Height Adjustable Hitch w/ 3-in. Lunette Eye (Replaces Ball Coupler) 8.707-532.0 2-inch Ball Coupler (Fits Height Adjustable Hitch 8.902-436.0 above) 8.707-531.0 2-5/16-inch Ball Coupler (Fits Height Adjustable Hitch 8.902-436.0 above) 8.707-506.0 Kit, Breakaway Actuator with Battery brake: HYDRAULIC brake OPTIONS 8.902-441.0 Hydraulic Brake, TRS-3500 with 2-inch Ball Coupler 8.902-453.0 Hydraulic Brake, TRS-3500, w/ Height Adjustable Hitch (Specify coupler below) 8.707-532.0 Coupler, 2-inch Ball (Fits Height Adjustable Hitch 8.902-451.0 & 8.902-453 above) 8.707-531.0 Coupler, 2-5/16-inch Ball (Fits Height Adjustable Hitch 8.902-451.0 & 8.902-453 above) 8.902-534.0 Coupler, 3-inch Lunette Eye (Fits Height Adjustable Hitch 8.902-451.0 & 8.902-453 above) mounting kits 8.902-455.0 Skid Mounting & Plumbing Kit (Required for Mounting Pressure Washer to Trailer) hoses installed 8.915-156.0 High-Pressure Hose, 3/8-inch x 100 ft., 2-Wire, Installed 8.915-155.0 Garden Hose, 3/4-inch x 50 ft., Installed HOSE REEL KITS (Hose NOT Included) 8.902-447.0 Hose Reel Kit for 100 ft. of 3/8-inch High-Pressure Hose 8.902-448.0 Hose Reel Kit for 200 ft. of 3/8-inch High-Pressure Hose 8.902-449.0 Hose Reel Kit for 75 ft. of 3/4-inch Industrial Garden Hose signage plate 8.902-469.0 Signage Plate wheels and fenders 8.902-466.0 Chrome Wheels, Pair, w/ ST205/75D15/C Spare Tire (2 Pair Required for TRS-6000) 8.902-467.0 Chrome Fenders, Pair, TRS-3500 Single Axle TRS-6000 options include above options plus... [Factory Installed] Part No. Description mounting kits 8.902-455.0 Skid Mounting & Plumbing Kit (Required for Mounting Pressure Washer to Trailer) BRAKE: ELECTRIC brake OPTIONS 8.902-437.0 Electric Brake, One Axle, TRS-6000 8.902-445.0 Electric Brake, Two Axles, TRS-6000 brake: HYDRAULIC brake OPTIONS 8.902-438.0 Hydraulic Brake, One Axle, TRS-6000 with 2-in. Ball Coupler 8.902-446.0 Hydraulic Brake, Two Axles, TRS-6000 with 2-in. Ball Coupler 8.902-451.0 Hydr. Brake, One Axle, TRS-6000 w/ Height Adj. Hitch (Specify Coupler below) 8.902-452.0 Hydr. Brake, Two Axles, TRS-6000 w/ Height Adj. Hitch (Specify Coupler below) chemical rack 8.912-409.0 Dual 5 gal. Bucket Chemical Rack, TRS-6000 only fuel tank and tool box [Diesel Only] 8.902-464.0 Fuel & Tool, Tank 45 gal., TRS-6000 only 8.902-465.0 Fuel & Tool, Tank 24 gal., TRS-6000 only wheels and fenders 8.902-468.0 Chrome Fenders, Pair, TRS-6000 Tandem Axle Axle Load Capacity Water Tank 1.103-806.0 Single 3300 lbs 200 gallon 840 lbs 1.103-807.0 Tandem 6000 lbs 330 gallon 1980 lbs Dimensions: Single Axle: 130”L x 73”W x 58”H; Double Axle: 178”L x 80”W x 62”H *Trailer and water tank only Page 16 Ship Weight ® 2010 shark Pressure Washer Catalog 800.771.1881 new floor care | AIR BLOWER | wet / dry vacuums NEW Air Blower: Powerful 3-speed floor dryer F Features • 3-speed fan • Sturdy, 4-point motor mount • Built-in carpet clip - great for flood restoration jobs • Foldable handle, 3 standing positions • 3,000 cfm max air movement = up to 50% reduced drying times rom floor to ceiling Kärcher’s AB 84 air blower will quickly dry hard floors, carpet, upholstery, textiles, drapery, even flooded drywall. The built-in carpet clip makes it perfect for flood restoration projects and with 3,000 cfm maximum air movement drying times are reduced by up to 50%. There’s no end to the convenient uses of the AB 84, including emergency air removal from buildings, right up to inflatable playgrounds. AB 84 CUL: 3-speed air blower with foldable handle and carpet clip Model Order No. Air Flow Rate Electrical Motor Fan Speed Settings Weight* (Net) AB 84 CUL 1.004-018.0 56 / 70 / 84 1/2 HP continuous duty 1,050 / 1,350 / 1,600 17 lbs Dimensions: 23”L x 16”W x 10”H *Weight with cables. NEW Wet / Dry Vacuums: High-performance, trouble-free operation K ärcher’s family of wet/dry vacuums provide dependable trouble-free operation utilizing features unlike any other commercial wet/dry vacuum available on the market today. Kärcher’s patented TACT (Trigger Air draft Cleaning Technology) filter system allows for continuous fine and coarse dust retrieval without the need to shut the unit down for filter cleaning.* Kärcher’s NT vacuums provide continuous suction power throughout the entire job; additionally Kärcher’s NT vacuums do not require additional filters or inserts when switching from wet to dry work.* Once the canister has reached its full capacity an electronic tank level monitor shuts the vacuum motor off. Features include: Great cleaning solution for: • No filters or inserts to install or remove* so operator can switch from wet to dry vacuuming on the fly; • Construction • Swivel, crush-proof hose means no twisting or kinking; • Wood working • Filter cleans itself while vacuum is being used - no work stoppage due to plugged dust filters; • Automotive • Filters feature large surface area providing longer operation before cleaning is required; • Building maintenance • Rental yards • Paint market • Impact-resistant construction with a base bumper to protect furniture and fixtures; *The NT 48/1 features a cylindrical dust filter without TACT; it requieres wet filter bags for water pick up. Easy-to-operate controls Large rear wheels and front swivel casters provide easy maneuverability Crush-resistant hose stows conveniently on top for storage Self-cleaning filter Model Order No. Air Flow (CFM) Capacity Noise Level Ship Weight NT 35/1 1.184-804.0 120 9.2 gallons 64 dbA 34.8 lbs NT 45/1 1.145-804.0 120 11.9 gallons 64 dbA 38.4 lbs NT 65/2* 1.325-105.0 229 17.2 gallons 74 dbA 50.7 lbs NT 48/1 1.428-605.0 141 12.6 gallons 66 dbA Dimensions: NT 35/1: 20.4”L x 15”W x 22.8”H; NT 45/1: 20.4”L x 15”W x 27”H; *NT 65/2 is dual motor and comes with a 20 amp plug NT 65/2: 23.6”L x 18.9”W x 36.2”H; Page 17 36.4 lbs NT 48/1: 19”L x 15.4”W x 30.3”H ® 2010 shark Pressure Washer Catalog 800.771.1881 new floor care | wet / dry vacuums TACT filter technology NT 35/1 NT 45/1 NT 65/2 NT 48/1 Allows filter to clean itself while vacuum is being used - no work stoppage due to plugged dust filters • No filters to install or remove • Electronic tank level monitor • Self cleaning filter • No filters to install or remove • Electronic tank level monitor • Self cleaning filter • No filters to install or remove • Electronic tank level monitor • Self cleaning filter • Requires wet filter bags for water pick-up • Electronic tank level monitor • Self cleaning filter Order Number 1.184-804.0 1.145-804.0 1.325-105.0 1.428-605.0 Vacuum Motor(s)/AMPS 1,265 watt (max.) / 8 AMPS 1,265 watt (max.) / 8 AMPS 2,400 watt (max) / 18 AMPS 1,200 watt / 10 AMPS Air Flow Rating 120 (CFM) 120 (CFM) 229 (CFM) 141 (CFM) Water Lift Rating 88” 88” 94” 80” Container Capacity 9.2 gallons (35 l) 11.9 gallons (45 l) 17.2 gallons (65 l) 12.6 gallons (48 l) Filtration System TACT TACT TACT Traditional Cylindrical Noise Level 64 db(A) 64 db(A) 74 db(A) 66 db(A) Power Cord Length 25 ft 25 ft 33 ft 25 ft Hose Length & Dia. 8’ X 35MM 8’ X 35MM 12’ X 35MM 8’ X 35MM Dust Bag 2-ply paper bag 2-ply paper bag 2-ply paper bag Paper Filter Bag Weight (Net) 25.3 lbs. 27.5 lbs. 41.9 lbs 22 lbs. Standard Tools Metal Wand, Floor Tool, Crevice Tool, Washable Nylon Filter Metal Wand, Floor Tool, Crevice Tool, Washable Nylon Filter Metal Wand, Floor Tool, Crevice Tool, Washable Nylon Filter Metal Wand, Floor Tool, Crevice Tool, Cylindrical Dust Filter Dimensions 20.4” X 15” X 22.8” (815 X 381 X 579 MM) 20.4” X 15” X 27” (815 X 381 X 695 MM) 23.6” X 18.9” X 36.2” (600 X 480 X 920 MM) 19” X 15.4” X 30.3” (485 X 390 X 770 MM) TECHNICAL DATA options Part No. KITS 2.637-595.0 2.637-352.0 2.637-353.0 2.638-147.0 2.862-166.0 Filter BAGs 6.904-208.0 6.904-210.0 6.904-285.0 6.904-351.0 6.904-242.0 6.904-364.0 Description Universal Industrial and Commercial Kit (NT 35/1 & NT 45/1) Building Kit (NT 35/1, NT 45/1 & NT 65/2) Professional Cleaning Kit (NT 45/1 & NT 65/2) Wet/Dry Vac Kit - Electrically Conductive (NT 35/1, NT 45/1 & NT 65/2) Car Cleaning Kit (NT 35/1, NT 45/1 & NT 65/2)) Paper filter bag for NT 45/1 Paper filter bag for NT 35/1 Paper filter bag for NT 48/1 and NT 65/2 Fleece filter bag, 3-play, for NT 35/1 HEPA filter for NT 35/1 and NT 45/1 HEPA filter for NT 65/2 Part No. Description FilteRS 6.414-789.0 Paper Cartridge Filter for NT 48/1 6.904-367.0 Paper Flat Pleated Filter for NT 35/1 and NT 45/1 6.904-283.0 Paper Flat Pleated Filter for NT 65/2 6.904-360.0 Rot-Proof Filter for NT 35/1 & NT 45/1 6.906-103.0 Polyester Fleece Filter, Washable, for NT 48/1 6.904-282.0 Polyester Fleece Filter for NT 65/2 nozzles - all purpose 6.906-384.0 Aluminum Nozzle with height adjustment, brush strips, rubber lips (compatible with all 4 wet/dry vacs) 6.906-513.0 Plastic Nozzle with rollers, brush strips, rubber lips (compatible with all 4 wet/dry vacs) toolS 6.906-240.0 Plastic 10” Crevice Tool (NT 35/1, NT 45/1 & NT 65/2) 6.900-922.0 Metal 14.5” Crevice Tool (NT 35/1, NT 45/1 & NT 65/2) 4.130-400.0 Gangeway Squeegee Tool (NT 65/2) Page 18 ® 2010 shark Pressure Washer Catalog 800.771.1881 new floor care for the rental market | industrial floor care machines NEW Industrial Floor Cleaning Equipment: S hark now offers a broad range of Kärcher Industrial Floor Care Equipment, ranging from walk-behind to ride-on sweepers and scrubbers. Designed for rugged reliability, these industrial machines clean indoor and outdoor areas effectively and economically. Using the proper floor care equipment not only results in clean and hygenic facilities, it also lengthens the life of the flooring materials by minimizing wear and tear due to friction from dirt particles. These machines are perfect for hotels, shopping malls, warehouses, convention centers, and anywhere there is a need for large area sweeping and scrubbing. SWEEPERS Features include: • Direct-throw sweeping for effective collection of heavy debris and small particulate and longer broom life; • Simple filter and brush replacements; • Filters made of washable polyester fabric for minimum maintenance; • Efficient manual or automatic filter shaker systems for long periods of uninterrupted operation; • Small turning radius and easy-to-clean recovery tanks; Disc or Roller Brush? • Traditional disc brush technology provides long floor contact for high-sheen surfaces and maintenance cleaning of smooth surfaces: • Roller brush technology provides up to 6-times higher contact pressure and thorough cleaning even on structured surfaces • Ergonomic designs and long battery run times KM 85/50 W Bp Adv KM 100/100 R BAT KM 120/150 R BAT KMR 1700 B/Lpg Technical Data Cleaning width Performance Container Capacity Sweeping Speed Filter Area in. ft2/hr ft3 mph ft2 SCRUBBERS 34 40 48 55 52,300 84,000 93,600 151,000 2 4.1 6.1 10.6 4.5 3.8 3.8 6.2 22.6 64.5 96.8 97 BD 80/120 W BR 90/140 R BR 100/250 R BR 120/250 R Technical Data Cleaning Path in. 32 36 40 48 Squeegee Width in. 40 38 47 55 Tank (Sol. / Rec) 23/25 37/37 66/66 66/66 Max Area Perf. gal. f2/h 28,800 38,750 65,600 78,000 Brush Rot. Speed rpm 200 500-1000 600-1200 600-1200 Page 19 ® 2010 shark Pressure Washer Catalog 800.771.1881 SURFACE CLEANERS | enhance cleaning effectiveness CYCLONE: Economy flat surface cleaner uses water-propelled spray bar T he Cyclone attaches to a hot- or cold-water-pressure washer (with a minimum performance of 3.0 GPM and 3,500 PSI) and cleans flat surfaces fast. Using a spray bar that spins at 2000 RPM, the Cyclone seemingly glides across floors, patios and walkways riding on the evenly balanced tubed pneumatic tires and swivel caster wheel. The rotating bar is made of stainless steel. Other features include: durable, rust-free polyethylene spray housing; fatigue-free trigger handle turns unit on/off for operator safety; tangle-free hose connection; tri-lingual operating instructions for liability protection. Model Order No. 30-587 8.903-608.0 Features • Polyethylene Housing—rugged but not too heavy to transport • Fatigue-free trigger handle • Tangle-free hose connection • Swivel caster for easy maneuvering • 22” wide, fits thru doorways • All-terrain, tubed pneumatic tires Description Kärcher-Shark Cyclone high-speed surface cleaner STEEL EAGLE: Power surface cleaning, built with aluminum housing T he Steel Eagle Surface Cleaner is the perfect accessory to maximize a pressure washer’s effectiveness on cleaning flat surfaces. By using the force generated from your pressure washer to spin two spray nozzles at high speeds, it reduces cleaning time by as much as 66%. Built with light and durable aluminum, the spinner will provide years of dependable service. Order No. 8.710-080.0 24” Steel Eagle surface cleaner 8.710-081.0 30” Steel Eagle surface cleaner Features • 8 GPM max flow • 4000 PSI maximum pressure • 210°F max temperature • 24” or 30” cleaning path Description WHISPER WASH FLAT SURFACE CLEANERS The Classic Features • Portable breakaway handle • ABS housing • 212°F • 4-10 GPM • Dimensions: 19” x 77” x 12” • Weight 28 lbs Order No. The Big Guy Features • Powder coated aluminum housing • Oversized, self-lubricating twin thrust bearings • 10” pneumatic tires, 4” caster • Crafted with durable stainless steel & aircraft aluminum • 212°F • 4-10 GPM • Dimensions: 28” x 44” x 12” • Weight 48 lbs Description 8.710-073.0 The Classic, 19” surface cleaner 8.710-074.0 The Big Guy, 28” surface cleaner Page 20 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness high-pressure hose: Made of abrasion-resistant, steel-wire braid K ärcher-Shark’s easy-to-identify hose is made of the highest quality. Tested to ISO 6945 / DIN 20024, it has proven to have up to seven times more abrasion resistance than other brands yet is 20% more flexible. A Order Number B C Features • Maximum-strength Class A ORS • 20% More flexible than other brands • Unique high-endurance wire braid PSI Rating Hose Length Wire Braid Inside Diameter Hose Color Hose Guard Color A 8.739-124.0 4000 25 ft. Single 3/8” Black Black 8.739-021.0 4000 50 ft. Single 3/8” Black Black 8.739-125.0 3000 50 ft. Single 3/8” Black Black 8.739-127.0 3000 100 ft. Single 3/8” Black Black 8.739-066.0 5800 50 ft. Double 3/8” Black Red 8.739-203.0 6000 50 ft. Double 3/8” Black Red 8.739-068.0 6000 100 ft. Double 3/8” Black Red B 8.739-130.0 3000 50 ft. Single 3/8” Blue Black 8.739-132.0 3000 100 ft. Single 3/8” Blue Black 8.740-260.0 4500 50 ft. Double 3/8” Blue Red 8.739-210.0 4500 100 ft. Double 3/8” Blue Red C 8.711-722.0* 4500 50 ft. Double 3/8” Blue Red *Equipped with coupler and nipple Blue hoses are non-marking wands: Stainless steel and chrome plated for point-and-shoot action A B C D T here is a Kärcher-Shark wand to meet every cleaning need. There are both stainless steel and economical chromeplated models for both the variable pressure and straight through wands with lengths ranging from 30 to 79-inches. Features • Easy to attach • Stainless steel or chrome-plated • Varying lengths up to 79 inches Old No. Order No. Length Functionality Made Of A -- 8.783-039.0 30” Side Handle Chrome Plated No Yes A 4-0110322 9.802-219.0 36” Side Handle Chrome Plated No Yes A -- Insulated Coupler 8.783-040.0 44” Side Handle Chrome Plated No Yes B 4-0111341A 9.802-222.0 36” Variable Pressure Chrome Plated Yes Yes C 4-011053 8.711-279.0 31” Straight Through Stainless Steel No No C 4-011054 8.711-281.0 40” Straight Through Stainless Steel No No C 4-0111321 8.711-290.0 72” Straight Through Stainless Steel No No D 4-0111427 8.711-300.0 79” Straight Through Chrome Plated Yes No telescoping wand: Extends cleaning reach to as high as 24 feet R eaching high places with a pressure washer just got easier with Kärcher-Shark’s telescoping wand. Made of light-weight fiberglass and aluminum, it’s the easiest handling extension wand on the market for cleaning multi-story buildings at heights of up to 24-feet and at up to 3000 PSI. Old No. Order No. Features • Extends up to 24 feet • Light and balanced for ease in cleaning • Made of fiberglass and aluminum • For use up to 300°F Description Length 4-011012 8.710-589.0 Telescoping wand with shut-off gun, 4000 PSI 6 - 12 ft. 4-011018 8.710-590.0 Telescoping wand with shut-off gun, 4000 PSI 6 - 18 ft. 4-011024 8.710-591.0 Telescoping wand with shut-off gun, 4000 PSI 6 - 24 ft. 4-011015 8.700-059.0 Telescoping wand shoulder strap and belt Page 21 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness HOSE REELS: Revolutionary 360° swivel design makes for easy handling T he Kärcher-Shark pivot hose reel features a sturdy, lockable, 360° swivel design so it is always aligned with the hose for tangle-free pressure washing. There are two types: pivot and standard (non-pivot). All are rated at 5000 PSI and 325°F to meet maximum limits of standard 3/8-inch highpressure hoses. Reels range in three sizes to handle 100, 200 or 400 feet of high-pressure hose and carry a two-year warranty. Features include: stainless steel rotor and dual seal swivel, “flipover” hose guide, spring-action pin to prevent slippage when winding hose and easy-to-engage cam-lever brake. It is the standard in the industry! A Old No. A B C Order No. Features • Rugged steel with all-weather powder coat finish • 2-year, leak-free warranty • ‘Flip-over’ hose guide for protection against injury • Spring-action stainless steel pin prevents slippage • Hard-pull protection Description Hose Capacity -- 9.558-016.0* Pivot reel, 360° swivel for 100 ft. of 3/8” hose 95580170 9.588-017.0* Pivot reel, 360° swivel for 200 ft. of 3/8” hose -- 9.558-013.0* Standard, non-pivot reel for 100 ft. of 3/8” hose -- 9.558-014.0* Standard, non-pivot reel for 200 ft. of 3/8” hose B 4-02755030 9.804-067.0* E-ZEE Reel, non-pivot for 100 ft. of 3/8” hose 8.711-638.0 4-02043505C Jumper Connection Hose Connects hose reel to pressure washer Fits all Kärcher-Shark hot water models C 4-02750001 Cox hose reel 8.711-858.0* 5 ft. of 3/8” hose for 175 ft. of 3/8” hose * Mounting bracket, jumper hose and connections not included For best results on optional hose reels, view options listed under specific machines TRIGGER GUNS: Insulated, ergonomic design reduces buzzing in hands K ärcher-Shark offers the highest quality trigger guns able to withstand pressures of up to 5000 PSI. All are insulated and feature a fatigue-free design for reducing the strain and numbing effect of continuously operating a pressure washer. A B Old No. Features • Insulated for operator protection • Fatigue-free design to alleviate numbing effect of continuous power washing Order No. PSI GPM Temp Rating A 4-01246 9.802-229.0 4500 12 300°F B 81-21250 8.710-394.0 5000 10 300°F C 4-01219A* 8.711-339.0 5000 7.6 320°F 8.750-247.0 4000 7 250°F --- * Includes gun, wand and coupler for use with 5000 PSI pressure washers C Page 22 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness Accessories for KG & RG Pressure washers: Order No. Description Units 9.162-320.0 Hose, 50’, 3000 PSI, 22MM Ends KG-252437 & KG-262637 9.162-323.0 Hose, 50’, 4000 PSI, 22MM Ends KG-313137, KG-403637, RG-364037 9.162-321.0 Hose, 25’, 3000 PSI, Thermal Plastic, 22MM Ends RG-232637 & RG-253037 9.112-017.0 Extended Trigger Gun, 4000 PSI KG-313137 & KG-403637 9.112-019.0 Extended Trigger Gun, 4000 PSI RG-364037 9.112-012.0 Extended Trigger Gun, 3000 PSI RG-232637 & RG-253037 9.802-220.0 Wand, 18” M22 X 1/4” Q/C KG Series 9.112-527.0 Wand, 20”, 4000 PSI, with Quick Connect RG-364037 9.112-533.0 Wand, with Quick Disconnect RG-232037 & RG-253037 quick couplers: The fast and easy way to attach wands and nozzles K ärcher-Shark quick couplers are the easy way to attach high-pressure nozzles and hoses. A precision brass design is used for the couplers, which are made of brass and withstand pressures of up to 3500 PSI. Nipples are a zinc-plated, hardened steel also rated for up to 3500 PSI. A Old No. Order No. Size Function Thread A 2-2000 9.802-164.0 1/4” B Coupler Female Old No. Order No. Size Function Thread B 2-2004 8.707-136.0 1/4” Nipple Female 2-2005 8.707-139.0 1/4” Nipple Male 2-2001 9.802-165.0 1/4” Coupler 2-2002 9.802-166.0 3/8” Coupler Female 2-2006 9.802-170.0 3/8” Nipple Female Coupler 2-2007 9.802-171.0 3/8” Nipple Male 2-2003 9.802-169.0 3/8” Male Features • Precision design • For spray pressure of up to 3500 PSI • Made of rust-free materials Male parts box: Quick access to the most commonly used replacement parts for Kärcher-Shark pressure washers K eep replacement parts at the tip of your fingers with the KärcherShark Parts Box. It includes an assortment of the most commonly used replacement parts—couplers, spray nozzles, and O-rings—all conveniently sorted in a heavy-duty tote box. (Individual parts in the box are listed below with costs.) Old No. Order No. Description Quantity Per Kit Old Part No. 30-111 Order No. 8.903-421.0 Old No. Order No. Description Quantity Per Kit 2-2000 9.802-164.0 1/4” Female Quick Coupler 4 4-12803515 9.802-292.0 3.5 15° Spray Nozzle 4 2-2001 9.802-165.0 3/4” Male Quick Coupler 4 4-12804015 9.802-296.0 4.0 15° Spray Nozzle 4 2-2002 9.802-166.0 3/8” Female Quick Coupler 4 2-2003 9.802-169.0 3/8” Male Quick Coupler 4 4-12804025 9.802-297.0 4.0 25° Spray Nozzle 4 2-2006 9.802-170.0 3/8” Female Plug 4 4-16540 9.802-311.0 65° Soap Nozzle 4 2-1902 9.804-016.0 Water Inlet Strainer 4 2-10942 9.802-146.0 Inlet Swivel with Strainer 1 2-0121 9.802-100.0 3/8” HNBR O-Ring 20 2-2007 9.802-171.0 3/8” Male Plug 4 2-0119 9.802-096.0 1/4” HNBR O-Ring 20 2-3409 9.802-192.0 Rupture Disk 1 4-12803015 9.802-288.0 3.0 15° Spray Nozzle 4 2-30082 9.802-182.0 1/2” Thermal Relief Valve 2 4-12803025 9.802-289.0 3.0 25° Spray Nozzle 4 2-1904 9.802-160.0 Detergent Tube Strainer 4 Page 23 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness standard nozzles: Replacements for Kärcher-Shark pressure washers M ake sure you ask for genuine Kärcher-Shark replacement nozzles. Made of hardened stainless steel and color-coded for ease of selecting, these nozzles come in convenient bubble packs containing the four most commonly used fan sprays: 0°, 15°, 25° and 40° plus a soap nozzle. Features • Packets: 4 high-pressure, 1 soap nozzle • Made of hardened stainless steel • Color-coded for ease in selecting Old No. Order No. Size 4-0003S 8.708-719.0 3 Description of Package Contents SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0035S 9.104-014.0 3.5 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0004S 8.708-721.0 4 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0045S 9.104-015.0 4.5 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0005S 8.708-723.0 5 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0055S 8.708-724.0 5.5 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0006S 8.708-725.0 6 SET OF 5: 0°, 15°, 25°, 40°, Soaper 4-0007S 8.711-267.0 7 SET OF 5: 0°, 15°, 25°, 40°, Soaper rotary nozzles: Legacy’s Revolution attaches to all pressure washers Rotary nozzle cleans both wide and deep 25° 0° T he Legacy Revolution rotary nozzle is rated for up to 4350 PSI at 185°F. Turning at an astounding 4000 RPM, the Revolution delivers faster and deeper cleaning action for the price of a 3000 PSI rotary nozzle. Features • Greater cleaning power • Longer operating life • Extra durable and versatile Old No. Order No. Orifice PSI Old No. Order No. Orifice 374231 9.302-242.0 3.5 4350 079920 2.884-972.0 3.5 374232 9.302-243.0 4.0 4350 079921 2.883-824.0 4.0 374233 9.302-244.0 4.5 4350 079922 8.932-953.0 4.5 374234 9.302-245.0 5.0 4350 079923 2.883-823.0 5.0 374235 9.302-246.0 5.5 4350 079924 2.883-822.0 5.5 374236 9.302-247.0 6.5 4350 079925 8.932-956.0 6.5 374237 9.302-248.0 7.0 4350 079926 2.884-974.0 7.0 374238 9.302-249.0 10.0 4350 079927 2.884-975.0 10.0 nozzle filter: Protects rotary nozzle from being damaged by debris T his nozzle filter, with its 100-mesh screen, is attached between the rotary nozzle (see listing above) and the wand to filter out and prevent debris from damaging the ceramics in the rotary nozzle thus extending the life of the rotary nozzle. It is rated to handle flow pressure of up to 5000 PSI. Features • 1/4” MPT outlet • 300°F maximum temperature • 100-mesh screen Old No. Order No. Made Of Inlet Outlet 347097 8.710-149.0 416 Stainless Steel 1/4-inch QC 1/4-inch MPT Page 24 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness foot controlled pressure valve: O perators of sewer and tube cleaning equipment need both hands free to feed or retract the hose in the sewer line. Foot operated valve allows hands-free control. Features • Inlet 3/8” - outlet 1/4” • Up to 12 GPM max flow • Up to 5000 PSI max pressure 8.710-134.0 8.709-972.0 • Brass body - stainless steel valve • Steel cover for safety Old No. Order No. PSI 344200 8.710-134.0 3000 Sewer cleaner foot valve 342024 8.709-972.0 5000 Foot valve w/ ST-2305* 089006 8.701-657.0 - Repair kit - foot valve 089850 8.701-673.0 - Repair kit ST-2305 4-0193 8.711-526.0 - Kit, 25’ hose, #4.5 nozzle, foot valve Description * Heavy gauge steel construction for durability and stability tachometer / Hour meter: • Extremely rugged and tamper-proof • Sealed from dirt and moisture Old No. Order No. Description 8.904-540.0.0 4-050820 8.904-540.0 Tachometer/Hour Meter 12VDC Shark industrial sandblasters: F or the extra-tough cleaning jobs, wet-sandblasting is the dust-free solution. Shark’s sandblasters attach to a cold-water pressure washer and, using a venturi, mixes sand or other abrasive media with the high-pressure spray to create enough cleaning power to strip paint off concrete and barnacles from a ship’s hull. The sandblasting nozzle is made of tungsten carbide for long life. There are two models; a top-of-the-line steel pot (photo below on right) with tight-fitting lid, or with a probe only. Other features include: • Quick-connect coupler for ease in attaching sand probe or pot • Valve for metering the flow of the media • Tubed pneumatic tires for easy maneuvering Rating: Super-duty Recommended Usage: Heavy Attaches to: Any cold-water pressure washer with minimum volume of 4 GPM Old No. Order No. Description 4-011201 8.904-471.0 Sandblaster w/ Pot (carbide) 4-011211 8.904-472.0 Sandblaster w/ Probe (carbide) 8.904-472.0 Page 25 8.904-471.0 ® 2010 shark Pressure Washer Catalog 800.771.1881 accessories | attachments to enhance cleaning effectiveness Sewer Hose: Super flexible sewer line hose H ose and couplings have small outside diameter, allowing hose and nozzles to fit through sewer line. Sewer line has Super Tough poly-ether cover over ultra-flexible nylon tube. (1/8” sewer nozzle and hose will operate through many 1-1/2” lines) Nozzles not included. • 150oF max temperature • Nylon tube, poly-ether cover 1/4” Hose 1/8” Hose Old No. Order No. Old No. Order No. Description 1/4” Hose - 2600 PSI, 1/4” inlet / 1/4” outlet Description 1/8” Hose - 4800 PSI, 1/4” inlet / 1/8” outlet 150968 8.705-607.0 1/4” x 50’ 150970 8.705-608.0 1/4” x 100’ 150960 8.705-601.0 1/8” x 25’ 1/4” Hose - 4400 PSI, 1/4” inlet / 1/4” outlet 150963 8.705-602.0 1/8” x 50’ 150972 8.705-610.0 1/4” x 50’ 150964 8.705-603.0 1/8” x 100’ 150973 8.705-611.0 1/4” x 100’ Sewer nozzles: Stainless steel sewer nozzles Features • 4100 PSI max pressure • Corrosion-resistant stainless steel • One forward orifice • Three rear orifices Old No. Order No. Nozzle / Size 373075 8.710-905.0 1/8” / 5.0 373076 8.710-906.0 1/8” / 5.5 373077 8.710-907.0 1/8” / 6.0 373078 8.710-908.0 1/4” / 6.5 373079 8.710-909.0 1/4” / 7.0 373080 8.710-910.0 1/4” / 9.5 Tube cleaning nozzles: T he reverse jets on the fixed and rotary nozzles pull the hose through the tube or sewer line and blast debris from line or tube walls. Fixed nozzles also have forward orifice to blast blockage out of the way. Features - Standard Sewer Nozzle • Blast forward and back • Clears clogs and flushes out lines • 4200 PSI max pressure Old No. Order No. Features - Rotating Sewer Nozzle • Adds extra agitation • 3000 PSI max pressure • Back Jet Only Nozzle / Size Rotating Nozzle Old No. Order No. Nozzle / Size 373024* 8.710-875.0 1/8” / 5.0 373023 8.710-874.0 1/8” / 5.5 373027 8.710-878.0 1/4” / 4.5 373025 8.710-876.0 1/4” / 5.5 373026 8.710-877.0 1/4” / 6.0 373029 8.710-880.0 1/4” / 7.5 373028 8.710-879.0 1/4” / 8.0 373032 8.710-881.0 1/4” / 12 373062 8.710-899.0 1/8” / 5.5 373038 8.710-885.0 3/8” / 4.0 373061 8.710-898.0 1/4” / 5.5 373037 8.710-884.0 3/8” / 5.5 373064 8.710-900.0 1/4” / 8.0 373039 8.710-886.0 3/8” / 8.5 373036 8.710-883.0 3/8” / 12 373035 8.710-882.0 3/8” / 14 Duct Cleaner 373040 8.710-887.0 1/4” / 5.5 * Back jet only Page 26 ® 2010 shark Pressure Washer Catalog 800.771.1881 COMMERCIAL DETERGENTS | formulated specifically for pressure washers detergents: Industrial-grade formulas K ärcher-Shark offers a broad selection of industrial detergent formulas engineered specifically for use with hot and cold water pressure washers. These safe and versatile products are effective in cleaning a wide range of surfaces. Available in 5 and 55-gallon containers. KD-100 All-Purpose Cleaner for Pressure Washers • Dilution Ratio: 130:1 • Biodegradable: Yes K D-100 is a non-caustic, butyl-based blend of ingredients formulated to provide a low-foaming detergent for safe removal of dirt and grime off a broad range of surfaces around the home or shop. Safe to Use On: Aluminum, stainless steel, glass, plastic, paint and fine automotive finishes. Applications: Effectively removes dirt and grime. Ideal For: Building exteriors, shop and warehouse floors, windows, etc. 9.803-791.0 9.803-789.0 USE KD-100 FOR: Description Container 9.803-789.0 KD-100 All-Purpose Cleaner 5 Gal Pail 47 lbs 9.803-791.0 KD-100 All-Purpose Cleaner 55 Gal Drum 495 lbs House Washing Part No. Siding & Decking Fences Pool Decks Ship Wt Driveways Vehicles KD-120 Chlorinated All-Purpose Cleaner • Dilution Ratio: 60:1 • Biodegradable: Yes K D-120 is a high-powered, non-caustic, general purpose cleaner with a bleach additive for extra-effective cleaning in a variety of applications, particularly kitchens, food processing and animal control. Safe to Use On: Aluminum, stainless steel, glass, plastic and paint. Applications: Stains, dirt, soils with carbon, oils, fats and greases as well as mildew, mold, soap scum and tough odors. Ideal For: Floors, walls, cabinets, patios, decks, ceilings, pens and crates. 9.803-712.0 9.803-716.0 USE KD-120 FOR: Part No. Description Container Ship Wt 9.803-712.0 KD-120 All-Purpose Cleaner 5 Gal Pail 46 lbs 9.803-716.0 KD-120 All-Purpose Cleaner 55 Gal Drum 495 lbs Hazmat product (UPS shipments are subject to UPS Hazmat fee) Mobile Homes RV’s Kitchens Food Processing Stainless Steel Pens / Crates KD-200 Extra-Strength Vehicle Cleaner • Dilution Ratio: 120:1 • Biodegradable: Yes K D-200 is a concentrated, non-butyl, heavy duty vehicle wash is distinguished by a special alcohol ingredient that helps restore old vehicle painted surfaces and can even give paint a “newly waxed” appearance. Safe to Use On: Aluminum, stainless steel, glass, plastic, fine painted finishes, chrome. Applications: Dirt, grime, grease, road film. Ideal For: Vehicle wash facilities, heavy equipment, shop floors, metal or plastic tanks, RVs, trucks, and autos. 9.803-750.0 9.803-720.0 USE KD-200 FOR: Part No. Description Container Ship Wt 9.803-720.0 KD-200 Vehicle Cleaner 5 Gal Pail 45 lbs 9.803-750.0 KD-200 Vehicle Cleaner 55 Gal Drum 496 lbs Hazmat product (UPS shipments are subject to UPS Hazmat fee) Road Film Auto Truck Tractor-Trailers Farm Machinery School Buses KD-320 Heavy-Duty Cleaner-Degreaser • Dilution Ratio: 100:1 • Biodegradable: Yes K D-320 is a heavy-duty, non-butyl, non-caustic degreaser that quickly penetrates and removes grime, oils and grease. This high-concentrated blend is formulated to wet, penetrate and suspend soil, oils and grease. Safe to Use On: Virtually every surface, including aluminum, stainless steel, glass, plastic, paint and fine automotive finishes. Applications: Grease, grime, oils, dirt. Ideal For: Vehicles, equipment, RVs, drilling rigs, trucks, etc. 9.803-772.0 9.803-732.0 Description Container Ship Wt 9.803-732.0 Part No. KD-320 Cleaner-Degreaser* 5 Gal Pail 48 lbs 9.803-772.0 KD-320 Cleaner-Degreaser* 55 Gal Drum 505 lbs 8.725-476.0 KD-320-NC Cleaner-Degreaser 5 Gal Pail 48 lbs 8.725-475.0 KD-320-NC Cleaner-Degreaser 55 Gal Drum 505 lbs *Hazmat product, cannot ship via UPS USE KD-320 FOR: Industrial Machinery Oil Field Page 27 Construction Equipment Road Machinery ® Your Local Representative: Kärcher Shark Pressure Washers 4275 NW Pacific Rim Blvd Camas, WA 98607 Phone: 800-771-1881 Fax: 877-526-3246 info@KarcherShark.com www.KarcherShark.com Revised 4/26/10 • P/N 8.916-362.0 • © 2010