Catalog 18 - VeloBase.com
Transcription
Catalog 18 - VeloBase.com
BREVETII JNTERNAZIONALI catalogue n. 18 INDEX page THE COMPANY 4 ITS PRODUCTS 5 6-7 SUPER RECORD road group RECORD road group 8 -9 GRAN SPORT road group 10 -11 SUPER RECORD t rack grou p - RECOR D track gro up 12-13 TOUR ING group 14 980 EQUIPAGGIAMENTO gro up 15 GEARS and th eir characte ristics 16 SUPER RECO RD gear 17 NUOVO RECORD gear 18 RALLY TOURING gear 19 NUOVO GRAN SPORT gear 20 980 gear 21 VALENTINO EXTRA gear 22 FRO NT CHANGERS 23 Braze-o n SUPER RECOR D front changer 24 Clip-o n SUPER RECO RD fron t changer 25 Braze-on RECO RD front change r 26 Clip-on RECORD fro nt change r 27 GRAN SPORT front change r 28 980 fro nt change r 29 NUe VO VALEN TINO front change r 30 VALENTINO front changer 31 Gear and front change r CO NTROL LEVERS 32 CO NTROL LEVERS co mpone nts 33 KIT for frame 34 HUBS sets 35 RECORD road hub components 36 RECORD t rack hub compone nts 37 NUOVO llBO hub components 38 CHAINWHEEL SETS 39-40-4 1 SUPER RECORD - RECOR D ROAD chainwhee l set com ponents 42 SUPER RECORD - RECORD TRACK chai nwheel set compo ne nts 43 GRAN SPORT road chai nwhee l set co mpo nents 44 Triple chai nring and cross chai nw heel set co mponen ts 45 BOTIOM BRACKET sets 46 BOTIOM BRACKET com ponen ts 47 HEAD SETS 48 HEAD SETS co mpo ne nts 49 PEDALS 50 RECORD and SUPER RECO RD ped al co mponents 51 GRAN SPORT pedal components 52 Set TOE CLIPS and fixing shoe plate 53 SEAT PILLAR 54 SETA PILLAR compone nts 55 BRAKES SET 56-57 SPARE PARTS of BRAKES SET 58-59 FREEWHEE L 60 BMX 61 SUNDRY SPARE PARTS 62-63 TOO L KITS 64-65 TOOLS CONTAINED IN KITS 66-67 CAMPAGNOLO SPECIAL TOOLS 68 CHAIN LI NE 69 G EAR RATIO TABLE 70 THE COMPANY • • 1927. Tullio Campagnolo. valid cyclist, punctures during a race on the C roce d 'Aune pass. It is winter time: the cold, the snow and the frozen hands d o not perm it him to release th e screws that fix the w heel to the frame. Tullio Campag nolo loses th e race, but that event is the push of a series of happy intuitions that in a few years radio cally change the bicycle and the cycling sport too. Those times are now tar away: tod ay the most famou s compo nen ts in the world are prod uced by a leader Company that entrusts its performances to a valid manag erial team, to its tech nicians' experience. la the qualification s 01 the employees, to its capac ity to change and of updatin g its range of products. 4 ITS PRODUCTS • The vocatio n of the Compa ny is certain ly the production of bicyc le componen ts: Campagno!o is one of the ve ry few Companies in the w orld that manufactures a complete ensemble and the on ly one that offers a prod uction of exclusive quality. All the pa rts as the hubs and the brakes, the gear and the chainset. but especially the sm all com ponents such as the titan ium screw for the gear and the seasoned rub ber hood s lor levers, witness the steady research of the Quality, w hic h is meant as safety, aesthetics , simpl icity of solutions. A comp lete range of products which are t he soul of the bicycle and wh ich ennoble and mark it in an unmistakable way. , 5 SUPER RECORD Road Group 4000/F • ..SUPER RECOR D .. Road Campa qnolo Group com posed of: 406111 .. Supe r Recor d .. brakes set. 01 020 18 .. Super Record .. gear, 0104010 front changer, 1013/5N ~1013/6N braze-on twin levers, 606-608- 617 twin ca bles, 1034 .. Record .. hubs set. 1049/A .. Super Record .. road chatnset. 1046/A .. Nuovo Record .. bott om bracket set. 1 037/A <t Record .. road su perlight ped als set, 4041 .. Super Record- head set. 4051 /1 .. Nuovo Supe r Record .. seat-pin, 0990106 superlig ht toe-clips set medium size, 1072 seat -pin fixing bolt-nut ¢ 8 . On request the above group ca n be supplied with .. Super Record .. pedals set with titanium axle. It is the jewel Group of Campagnolo line. for profession als. balanced to obtain the best results d uring races. It IS man ufactured wi th aeronautic and space m aterials (titanium and light alloys). The lightness of each com pon ent takes into consideration the satety w hile rac ing and the stiffness, to have Immediate action during the sprints and efficiency In c limbing. All the friction s are reduced to the minimum, w ith surfa ces grinded to have a very low roughness. The gear and the front changer are extremely funct ional; also used under stress g ive a su re and smocth performance. The brakes intervene also in descents covered at 8 0 km/h., with dry and wet roads. gradually and w ith the rmnimum effort of the hands, w itho ut vibrations and slipping of the wheel on the road . Everything is extremely sliding and silent. accentua ted by the very high handicraft care of the details: it is the group of the world Champions. 6 • • . ..... ;t;. ' ....i • • 7 RECORD Road Group 1032/F • «RECORD » Road Campag no lo Group composed of: 2040/1 « Record» brakes set. 1020/ A «Nuevo Reco rd» gear, 0104007 front changer, 1013/5N-l01 3/6N braze -on twin levers, 606-608-617 twin cab les, 1034 «Reco rd» hubs set, 1049 «Record » road c hainset. 10461A <Nuevo Record» bott om brack et set 1037 «Record » road ped als set, 1039 «Record» head set, 1044 «Record» seat-pin, 01 10056 fixing shoe p lates set, 1072 seatpin fixing bolt -nut ¢ 8. This group has all the ideal characteristics to obtai n the vict ory during the races, but it has been planned to keep the effic iency of the bicycle w ith a less specialized assistance. It IS destined 10 professional riders and to the amaleurs of the sporting cycling. The producti on of all the com ponents is always balanced to g ive the best perfo rman ces to the riders, exploiting at the most their agonistic and sporting capac ities. The safety is at the maximu m level even if the bicycle IS not always overh aule d before the rac e. It is a group that lasts long , eithe r aesthetically or functionally ; the care of the details continu es during the m anufacturing process and the stan dards of test at d ifferent stages are very severe ; accord ing to Campag nolo level. 8 • • o , " . .. .~ • • 9 GRAN SPORT Road Group 2240/5F • .. GRAN SPORT .. Road Campaqnolo Grou p com posed of; 117 «Gran Sport .. brakes set, 3500 -N uovo Gran Sport .. gear, 0104006 .. Gran Sport .. front c hanger. 1207/N-1208/N ..Gran Sport .. braze-on tw in levers, 606608 cables. 617 casing, 1251 .. Nuovo Tipo .. small flange q uick release hubs, 0304 .. Gran Sport» chainwheel set and 3331 .. Sport .. bottom brac ket set, 1040/A .. Sport .. headset w ith 7300109 washe r, 3700 «G ran Spo rt .. ped als set, 0110056 fixing shoe plates set. 3800 .. Gran Spo rt .. seat-pin. The approach to the sophisticated q ualities of Campaqnoto product for he who tends for the first time (or almost) to become an amate ur of the sporting cycling . is easier when he starts using this group. It has the contents 01the technical evolution of those who have always made compo nents for winning racing bicycl es; lightness, safety, fun ctionality are in fact looked for w ith the same stubbo rness as in the" Nuovo Record .. and ..Super Record .. rang es. On said group the same plann ing and executing Campagnolo mentality is expressed with the researc h of the aesthetics and of the care of details realized with less sophisticated techniques. It is hence a group for amateurs and for young people who can already und erstan d how important it is 10 have from their own bicycle high performances, safety and endurance. It is a group in wh ic h the project and the raw material used are always of high l echnolog ical level, wi thout saving of material or of process. II is a prod uct that immediately realizes the enthusiasm of pedall ing. 10 • No more available and replaced by the "Victory" range. • e o o o o • • 11 SUPER RECORD Track Group 4100 • . «SUPER RECORD » Track Campagnolo Group composed of: 1036 «Record » track large flange hubs set, 4151 " Super Record .. track chainset. 1046 «Record »track bottom bracket set, 1 0 38 / A « Record» trac k superlight pedals set , 4 141 «Super Reco rd » track head set, 4051/1 «Nuevo Super Reco rd» seat-pin, 0990106 su perHg ht toeclips set medium size, 1072 seat -pin fixing bolt -nut ¢ 8. On request the above group can be sup plied with «Super Record .. pedals set. RECORD Track Group 1033 .. RECORD .. Track Campagnolo Group composed of: 1036 «Record » track large flange hubs set. 1051 .. Record» track chainset, 1046 .. Record .. trac k bott om brac ket set. 1038 .. Record .. track pe dals set. 1040 .. Record .. track headset, 1044 ..Record .. seat-pin, 011 005 6 fixing shoe prate s set. 1012 seat-pin fixing bolt-nut ¢ 8. 12 • • , , tr .;; , ,, , , •• ••• • • 13 TOURING Group 279 • «TOURING" group composed of: 5011/06 Rally Touring» gear, 0104012 front change r, 1013/5N -l 013/6N braze-on tw in levers , 606-608 cables, 617 cas ing, 1251 «N uevo Tfpo » small flange q uick release hubs set, 030G/e 1 16 mm. ch ainwh eel set complete with 5031/00 «Gran Sport» bottom brack et set for triple chainring, 1040/A .. Sport» head set with 7300109 «Sport» headset washer. e: o • • 14 980 EQUIPAGGIAMENTO Group 281 ,,980 EOUIPAGGIAMENTO " Group composed of: 6011/00 "9aO.. gear, 0104012 front changer, 1207/N120a/N braze-on twin levers, 606-608 ca bles. 617 casing , 1251 -Nuovo Tipo » small flange quick release hubs set. • 0) • • 15 GEARS • 0102018 1020/A 5011106 3500 «Super Reco rd » gear «Nu evo Record " gea r «Rally Touring» gea r - Nuovo Gran Sport» gear 6011/00 -980 - gear 2170 .. Va lentino Extra .. gear Weig htlg rammes 0102018 1020/A 5011 /06 3500 6011 /00 2170 182 199 225 220 200 235 To make a good gear are necessary experience and passion. From the far thirties. Campagno lo plans. tries on the spot, produces and patents new gea rs. The various versions produced are the synthesis of these 50 years of love for the rac ing bicyc le. The Campagnolo gears always realize the new ratio, also if used while the ride r pedals under stress. The w orking preci sion and the use of the most proper metals make of it the safest and the most long lasting gear. The cage pla te m oves remaining alw ays pa rallel to itself for the arms coupling precision. W hen it turns to give or pic k up the c hain, it does it around his axle, withou t conical slid ing . The movement of the c age plate ca rries on the change from one sproc ket to the follow ing , in climbi ng and in desce nt, making the chain move on the d esired sp rocket w ithout overrun. The lever of the derailm ent is sliding and safe, and it renders easier the research of the desired ratio. The cha in w inds up on the rollers of the ca ge pla te w ithout frictions and with smooth ness. It is of easy adjusting for the research of the ends of the transversal stroke. It is a safe and long last ing gear. • 16 SUPER RECORD Gear 0102018 composed of: 0010103 roll er, 84 gear return spring sc rew. 89 cab le loc king screw, 98/A gear return spring, 99 gea r adjusting screws, 780 cab le clamp bolt washer, BOBIA spindle, 61 011 A low er body bu sh, 812/1A grub screw, 813/A tension spring, 4002 upper body, 4003 spring cage, 4004 upper pivot titanium bolt, 4005 spring cage titanium bolt. 4007 adjusting bolt upper spring, 4008 adjus ting bolt lower spring , 4009 spri ng cage cover, 711901 0 ou ter cage plate, 7117019 inner arm, 7117033 front arm, 7119009 Inner cag e plate , 7161015 sprocket bolt nut , 7350113 gear sprocket bolt. 0102018 ~~ 7350 113 ~ 4007~i- I 4002 I > 001 0103 7 11 9009 4004 4009 7 117033 <I 7161015 780 , • I 4003 ...:- • 89 8081A ..:f!!:!:' A~ 7119010 4008 :;0 813/ A 99 8 1011A _ 4005 17 NUOVO RECORD Gear • 10201A co mposed of: • 0010/03 gear roller, 84 gear return spring sc rew, 88 clamp washer, 89 cable locking sc rew, 93/A sproc ket bolt , galA gear return spring, 99 adjusting sc rew, 120 lower adjusting spring , 120/1 upper adjusting spring, 166/A up per pivot bolt, BOStA upper body, a06/A front arm, B07/A inner arm, BOB/A spindle, SlOIA lowe r body, B10/1A lower body bush, 81 1/A gear spring bolt, 812/A spring ca ge cover, 81211A grub sc rew, 813/A tension spring, 814/A outer cage plate, 815/A inner cage plate. 1020/A 99 805/A 4J,_ 120/1 '7; L 8071A ~/A 80 6/A ---~, -I 89 • \;20 808/A 99 8 10 /A 18 RALLY TOURING Gear . .' 5011/06 compos ed of: 0010/03 gear roller. 84 gear return spring screw, 88 c lamp washer, 89 cable locking screw , 99 adjusting screw, 120 lower adjusting spring, 12011 upper adjusting spri ng, SOBIA spind le. 8l0/1A lower body bush, 81211A grub screw, 813/A tension spring, 3452 outer cage plate, 3453 inner cage plate. 3461 sprocket bolt, 3462 front arm, 3502 lower body. 3504 inner arm, 3505 spring cage bolt. 3506 g ear upper pivot bolt. 3508 spring cage cover, 3509 return spring, 3501 upper body. 99 120/ 1\ ' 3 501- • 3504 / 3508 s> 3502 • ~20 89 . • 3461 / 8 10/ 1A 3452 •99 , 3505 19 NUOVO GRAN SPORT Gear • 3500 composed 01 : • 00 10/03 gear roller, 84 return spr ing screw, 89 cable locking sc rew, 99 adjusting sc rew, 120 lower adjusting sprIng. 120/1 upper adjusting spring, 780 cable clamp bolt washer, BOBI A spindle, 8 10/1A lower body bush, 81 2/1A grub screw, 813/A tension sp ring , 9 2 6 inner cage plate, 933 roller sc rew, 3501 upper body, 3502 lower body, 3503 1rool arm , 35 04 inner arm, 3505 spring cag e bolt, 3506 upper pivot bolt, 3507 outer cage plate, 3508 spring ca ge cover, 3509 return spring. 3500 84 0010/03 81 2/1A 350 1 ~3 926 3506 3508~ 3503 780 933 ~ ~ 3502 ,/ . ';'l.~- 3505 20 8 10/1A 3507 • ~20 980 Gear 6011 /00 composed of: 0010/03 gear roller, 93/ A sprocket bolt, 780 cable c lamp bolt was her. SOB/A spindle, 7116054 lower body bush. 7116055 spring cage cover, 7117034 front arm, 7117024 1nner arm, 7119013 outer cage plate, 711 9014 inner cage plate, 7143320 upper body, 7143321 low er body, 7161 108 fixing screw nut. 7200011 adjusting screw, 7260060 return spring, 7260061 gear tension spring , 7350116 upper pivot bolt, 7350117 spring cage bolt, 7350119 cable locking screw. 7260060 00 10/03 7 11901 4 • 7 1160 54 21 VALENTINO EXTRA Gear • 2170 composed of: • 00 10/03 gear roller, 80/A gea r fixing plate , 89 cable loc king screw, 124 sc rew, 780 cable clamp bo lt washer, 914 clamp nut. 926 inner cage plate, 933 roller screw, 2151 low er body, 2152 outer cag e plate, 2 153/A gea r spring bolt. 21 54 gea r cover, 2 155 gear spring, 2156/A front arm , 2157/A inner arm , 2156 gear lock nut. 2 159 gear hanger washer, 2160 lower body bush, 2161 upper body, 22051A fixing pivot bolt, 2209 gea r return spring, 2215/A gear adjusting screw, 2217 adjusting bolt spring. 2170 9 14 0010/03 " ...• {,,,\. ,/ 215; 11 221 5/A "' 2217 ./ 2215/A 933 2160 2153/A 22 926 2217 2205/A 2152 FRONT CHANGERS 0 104011 braze-cn 0104010 01 04009 01 0 4007 0 104006 0 104008 0104012 2050 Super Record» front changer c lip-on «S uper Record» front changer braze -on «Record» front changer clip-on «Record» front change r «G ran Sport» front changer «N uevo Valentino» front changer cli p-on « 980» front changer front changer 0104011 « 0104010 0104009 0104007 0104008 0 104012 2050 • • 0104008 23 Braze-on SUPER RECORD Front Changer • 0104011 com posed of: • 89 locking screw, 2 15 ca ge spanner bolt, 21 7 cage space r bolt nut. 774 adjusting screw, 7117027 upper arm, 780 cable clamp bolt washer. 7117028 lower arm , 788 cage shank DOlt. 790 bush , 7260047 sp ring for adjusting screw, 787 return spring , 7102012 braze-on hanger. 7300105 co ncave washer. 7350115 screw for braze-on front changer. 94 1 circlip. 1180006 Fork complete with : 2 15 - 2 17· 79 0 · 105 217 - 7 ' 17027. 1143036 Body co m plet e wi th: 2 1430 14 - 7300 105 - 7350 115 - 94 1. 0 1040 11 21 7 • 217 I' 89 ~ 774 7 117027 .#. ~ 72600~~ 10 5217 , i7 10 20 12 21 430 14 24 Clip-on SUPER RECORD Front Changer 0 10401 0 co mposed of: 89 locking screw, 215 cage span ner boll , 217 cage spacer bo lt nut, 774 ad justing sc rew, 776 clip fixing screw, 777 nut, 7117027 upper arm, 780 ca b le c la mp bolt wa sher, 71 170 28 lowe r arm, 788 cage shank bo lt, 790 bu sh, 7260047 spring for adju sting screw, 767 return sp ring, 7182025 cli p, 773/1 hinge, 773/2 hinge spi ndle, 941 eire lip. 1180001 Fork co mplete w ith: 215 - 217 - 790 - 105217 - 7 1170 2 7. 1143029 Bod y com plete w ith : 776 - 777 - 2t4 3004 -718 202 5 -773/ 1 - 77 3/ 2 - 94 1. 0 104010 7 1170 2B / )4 89 • 780 tP 71 17027 788 777 ~ 2 15 Q 72 60047 7182025 -, • 776 • 25 Braze-on RECORD Front Changer • 0104009 composed of: • 89 locking screw, 215 cage spanner bolt, 217 cage spacer bolt nul , 774 adjusting screw, 778 upper arm, 780 cable cla mp bott wash er, 782 low er arm, 788 cage shank bolt, 790 bu sh, 7260047 spring for adju sting screw, 787 return spring, 941 circlip, 7102012 braze-on hanger, 7300105 concave washer, 7350115 screw for brazeon front c hanger. 1180001 Fork complete with: 2 15 - 2 17·778 · 790 - 1052/ 7. 1143036 Body com plete with : 2 1430 14 - 7300 105 - 7350 11 5 - 94 1. 0104009 89 217 780 ~:78 790 r; .Ii f. " 7260047 ~ ~ 215 1052/7 I 214301 4 7300105 73 5011 5 26 Clip-on RECORD Front Changer 0104007 composed ot: . 89 locking screw, 215 cage spanner bolt, 217 cage spacer bolt nut. 773/2 hinge spindle. 774 adjusting screw, 776 clip fixi ng sc rew, 777 nul , 778 upper arm, 780 cable clamp bolt wa sher, 782 lower arm, 788 cage shank bolt, 790 bus h. 7260047 sprin g for adju sting screw, 787 return spring, 773/ 1 hinge, 941 circlip . 1180001 Fork complete with: 2 15 - 2 17 - 778 · 790 - 1052/7. 1143029 Body complete with : 776 - 777 - 773/ 1 - 773/2 - 941 - 2 14300 4. 0 104007 782 /: 774 89 2 17 ~ 'iiV 790"1 788 " 780 tJ 778 ;7 ~ 1 2143004 2 15 <, • / 94 1 • • / 2 14300 4 . ~3/2 27 GRAN SPORT Front Changer • 0104006 composed of; • 89 locking screw, 215 cage spanner bolt. 217 cage spacer bolt nut, 773/1 hinge, 773/2 hinge spindle, 774 ad[ustmq screw, 775 adj usting bolt spring, 776 clip fixing screw, 777 nut. 778 upper arm, 780 cable clamp bolt washer, 782 lower arm, 787 return spring, 788 cage shank bolt, 790 bush. 941 clrou o. 1180003 Fork complete with: 2 15 . 217 . 778 - 790 - 78 4. 1143013 Body co mplete w ith : 773/ 1 - 776 - 777 - 773/2 - 94 1 - 2 1430 0 t . 0104006 2 17 2 17 R 89 777 ~ 773 /1 2 15 /" 784 , / / 28 776 773/2 980 Front Changer 0 104012 composed of: 89 loc king screw, 215 cage spanner boll. 217 cage space r bolt nut, 77 3/ 2 hinge spindle, 790 bush, 2003 cable c lamp boll washer, 22 15/A upper adjusting screw, 2217 sp ring for adjusting screw, 7 117025 upper arm, 7117026 lower arm, 7161108 nut, 7182026 hinge. 7260063 return spring, 941 circlip. 1180005 Fork complete with: 2 15 - 217 - 790 - 7 11702 5 - 71 17026 - 7 180077 - 7260063. 1143046 Body com plete with: 2 1430 15 - 71 61 108 - 718202 6 - 941 - 77 3/2. 01 0401 2 2215/ A 89 4 2003 dJ 711 7025 773/ 2 / • 215 71820 26 71800 77 • 94 1 21 430 15 29 NUOVO VALENTINO Front Changer 01 04 00 8 com posed of: • 89 locking screw, 215 cag e spa nner bolt. 217 cag e spacer bolt nut , 773 /1 hinge. 773 /2 hinge spindle , 774 ad justing screw, 775 adj usting bolt spring , 776 clip fixing screw, 777 nut. 780 cab le clamp bolt wash er, 788 cag e sha nk bolt. 790 bush, 787 return spring , 711 701 7 upper arm , 711 701 8 low er arm, 941 circup, 118 000 4 Fork com plete w ith: 2 15 - 2 17 - 790 - 7 117 017 - 205 0/ 7. 114 301 3 Body co mp lete with : 773 - 773 / 1 - 77 6 - 777 - 773 /2 - 9 4 1. 010400 8 787 711 701 8 ~774 89 217 777 Il 215 775 ~ . •. " "'\ . ~ 773/1 I 773 30 ~/2 776 VALENTINO Front Changer 2050 composed of: 89 locking screw, 210 body clip bolt. 2 11 fixing clip, 213 fork fixing cli p, 214 fork. 21 7 cage spacer bolt nut. 226 adju sting spri ng. 227 adjusting lever screw, 780 cable clamp bolt washer. 1601 front changer body, 1602 front changer lever. 1603 fork holder spindle. 1604 return spring, 1605 l ixing lever screw. 89 780 2050 1605 1601 226 217 • 21 4 ."',., • 31 CONTROL LEVERS 101213 10 1311 1013/1 A 1013/5N 10 13/ 6 N 10 14 10 14 / 1A 12 07 /N 120B/N • handlebar control lever «Record» gear down tube control lever R.H. down tube control lever «Record» braze-on control lever for front changer, without 660 boss «Record» braze-on con trol lever for gear, w ithout 660 boss «Record" twin down tube control lever twin down tube control lever braze-on gear co ntrol lever, without 660 boss braze-on front chang er con trol lever, withou t 660 boss. C':\ ,jI" ' •• nI~, n ! p' ~ I' • " .. .. • !.. .. .. .. :i .# "/ 1208/ N 1207lN ..• 101 3 /1 1013 /5N , ,.. iN \. I! t 10 13 / 1A , I,. .". . .- .. • :g 0 ... , r,. i~ l:.. " • " 1014/1 A 32 1014 101 3 / 6N CONTROL LEVER Components DESCR IPTION No. 1014 lD13f5N 1013/6N SEGMENT COUNTER NUT 1014f1A 1208/N 1013/1A 120 7/N 139/1 HEXAGONAL SCREW TENSION ADJ.SCREW 139 12 140/ 1 • 142 173 SEG. HOLDING RI NG RUBBER CAP FRICTION PLATE 174/ 1 CONTROL BODY 20 012 CONTROL LEVER 201 600 RH COLLAR R.H, PLATE 60012 601 602 604 RH CONTROL LEVER L.H. CONTROL LEVER ADJUSTI NG SCREW ADJ. WING NUT 60 4/ 1 FIXING CLIP BOLT I TWIN CONTROL CLIP 609/1 610 L H. PLATE WASHER NUT 6 11/2 66 1 777 1202003 ADJ. WING NUT CLIP TWIN CONTROL CLIP • • • • • • • • • • • • • • • •• • • 7182003 7182018 • 7300115 7304005 Q190f03 FRICTION WASHER 0 190/D6 ELASTIC WASHER 0190/07 • • • • • • • ~- 0 101 3/1 137 138 EXPANDING SCREW WASHER ELASTIC WASHER COVER MODEL COM POSITION CAT. • • • • • • • • • • • • • • • • • • • • • •• • • • • • • • • 1012/2 • • • •• • • • • • • • •• • 7 1820 18 I I 60411 0190/03 602 611 12 01 90 /07 0 190/06 0 190/04 o I I 60 0/ 2 60 1 01 90/03 6041 1 01 90/04 01 90/0 6 0 190/07 33 KIT for frame 1010 1010lA 1010/8 1010/1 1053 1060 • • «Record» set fork ends, with eyele ts «Record» set fork ends, without eyelets «Nuevo Record» set fork ends, wi thout eyelets «Sport» set fork ends, with eye lets «Track» set fork ends -Corsa- set fork ends. 1134005 Set of screws , nuts and springs for .. Record .. fork ends, without eyelets 1134006 Set of screws. nuts and springs lor Nuovo Record .. fork ends, w ithout eyelets 11 34 0 0 4 Set of screws. nuts and springs for Record .. fork ends, with eyelets. 0< 0< 660 621 626/8 663 Braze-on Braze-on Braze-on Braze-on boss cable stop front changer cable ferrule cable ferru le. 1053 1010/8 ~ ~ 101 0/1 1010 ••- - 1134006 34 ' Mvnn Uh 1134005 a 660 1060 .Q ....... 621 663 626/8 HUBS SETS 1034 1035 1036 1036/2 1251 1253 Pair .. Record .. road small flange quick release hubs (flanges w ith 2 4·28-32-36 -40 holes) Pai r .. Record .. road large flange quic k release hubs (flanges w ith 2 4-28-32-36-40 holes) Pair .. Record .. trac k large flange solid spindle hubs (flanges with 2 4-28-32-36-40 holes) Pair «Record» track small flange solid spindle hubs (flanges with 2 4-28-32-36-40 holes) Pair - Nuovo Tipc » small flange quick release hubs (flanges with 28 -32 -3 6 holes) Pair .. Nuovo Tipo » large flange quick release hubs (flanges with 36 holes) N.B. When nol specified all the hubs w ill be furnished with Italian thread, flanges with 36 holes, 6 speeds . In the hubs Campa gno lo expresses, perhaps, its utmost precision level. T he c learance of the two ball bearings is the minimum which can be obtained to allow the max imum smoothness . T he ball s are selected to the micro n. The bod y of the hub is a wh ole piece forged , in light alloy d uly treated to make a prod uct having high and heavy feat ures. The roll ing t rack s are all hardened by heat treatments and grinded to obtain a very low roug hness and high hard ness. The cla mping is always sure and keeps the w heel in a perfect position , also thanks to the sev ere paralle lism o f the width, w hich guarantees the life of t he axle. 1253 1034 1251 1036 1036/2 35 Components of RECORD Road Hubs 1 front lock nut, 18 conical spring, 19 front hollow axle, 25/R front cone. 29/R rea r hollow axle (1 32 mm lang).-On request th e axle can be supplied 134 and 14 0 mm long . 32/R rear cone, 33 rear lock nut, 35 f ront hub lock w asher, 36 rear hub lock washer, 46 rea r hub spacing co llar, 59 q uic k release conical adjus ter, 60 qu ic k release cap, 61 quic k release lever. 6 1/1 domed nut. 61/2 Grow er w ash er, 64 q uick release front skew er, 65 q uick release rear skew er, 737 front ball c up. 738 rear ball cup, 739 lront du st cover, 740 rear du st cover, 741 elastic clip, 1001/3 com plete front q uick release skew er for ..Record » hub , 1001/45 com plete front axle for .. Record .. road hub , 1006/55 com plete rear axle for ..Record .. road hub, 1006 / 8 complete rear quick release skew er lor .. Record - hub. 21 04 set (9+ 9) special ¢ 7/ 32- balls selected with 1/1 0 00 of mm tolerance. 2106 set (9 + 9) special ¢ 114- balls selected with 11 1000 of m m tolerance. 1001/3 ( 61 '-t rst = ' 50 64 61 /2 ¢ 61 /1 .. 18 18 i?' .-:1 , 61 - llll) ~ [~) 65 18 " e I) 35 2S/R 19 60 61/ 2 .., 61 /1 ~ 1006/8 01 lT1\1 t » S9 • ~ 18 59 (?l. ~m till 'E a1 ) 2S/ R 35 l001 /4S Q 739 I " " 33 36 -». ',,'. , 0 ' 2104 ~ 737 M 741 , 737 J ,,' 0 2104 739 " S) em J 32/ R 46 29 / R 32/R '~ " 36 1006158 ,, -, ,,' • " 740 2106 ,,,',-. ,,' .. ......... 36 ,,',-, ~ 738 741 " 738 2106 740 I33 1 RECORD t rack Hubs Components 1 front lock nut, 19/P front solid sp ind le axle for .. Record .. track hub, 25/R front cone. 29/P rear solid spindle axle for «Record» trac k hu b; 32/R rear cone, 1283 rear loc k nut, 35 front hu b lock washer, 36 rear hub lock washer, 667 .. Record» trac k hub front nut. 668 .. Record .. track hub rear nut. 737 front ball cup ; 738 rear ball cu p, 739 front dus t cover, 740 rear dust cover, 743 rear track hub lockring, 1001/4P com plete front axle for .. Record .. trac k hu b, 1006/5P comp lete rear axle tor « Record .. trac k hub. 2104 set (9+9) spec ial ¢ 7/3 2- balls selected with 1/1 0 00 of mm tolerance. 2106 set (9+9) special ¢ 1/4" balls selected with 11100 0 of mm tolerance. {l' 0 , r, " 667 , I) 19/P 35 2S/ R 11 1 ~, 2S/R 35 '667 t1 l 001/4P • ,, .-, ] s-: -, ':0., , .' , ~ 739 • 2104 737 0 740 737 2104 739 ' I (t, O ~ D 668 1283 36 32/ R 29/P .PJ l 32/ R 36 '283 666 1 1006/SP .', .' . v-: (9 2'06 738 ....' ,,-, '-... ,,' ~ 738 ,', , "06 2' , ». " ~ ~', ' 743 G 740 37 NUOVO TIPO Hubs Components 1 front lock nut, 18 con ical sp ri ng, 19 front hollow axle. 25 front cone, 29 rear hollow axle (127 mm lon g). o rtre qu est the axle can be supplied 132 and 134 mm long). 32 rear cone, 35 front hub loc k washe r, 36 rear hub lock washe r,4 6 rear hub spacing collar, 1001/4 co mplete front hollow axle for " Nu ovo Tlpo » hub, 1256 complete rear hollow axle for - Nuovo Tipo .. hub, 1270 front ball cu p. 1271 rear ba ll cup, 1272 front dust cover, 1273 rear dust cover, 1283 rear lock nut, 1301 q uick release cap, 1302 q uic k release lever. 1303 circlip for lever. 1304 conical tension spring, 1305 front quic k release skewer, 1306 rear q uic k release skewer, 1307 knu rled adj. nut,130 9 wa sher for skewer, 131 0 complete fron t quick release skewer for .. Nuovo hub. 1311 complete rear quick release skewer for .. Nuevo uoo .. hu b, 2105 set ( 10+ 10) special ¢ 3/ 16- ba lls selected with 1/1 0 00 of mm tolerance, 2106 set (9+ 9) spec ial ¢ 1/4- balls selected wi th 1/1000 of mm tolerance. uoo- 1310 FA ,, 1302 11 1301 @ JV e eo • 1304 1303 1307 I fl -- 1309 I rrnA1'11 1305 18 18 2, '· T.: 1309 ~ 'lli • " 35 1 :::J 19 25 . ) 1302 1304 ~ 1303 131 1 0 - E) 1301 CJ rtI 1306 18 18 '. C() 1307 :] I 25 35 a 1 1001/4 ,'. @" " 1272 2105 ~ 1270 " @ IJ f ' 283 36 46 ~ ", " 2105 ~\ , ,J ~ 1272 ~ (j 29 32 1 32 36 1256 ,', , », ',,'. 1273 38 A 2106 ,', ",,,'. 1271 1271 (' v 2106 1273 ~ 1283 1 CHAINWHEEL SETS 0 30 4" Gran Spo rt» road c hainwheel set (wi th 170 mm cranks. pedal hole ¢ 9/ 16"x 20 F. and chainring for cha in 1/2"x3/3r [2 mm]). Speci fy the number of teeth of chainring available from 42 to 57 teeth, 104914 cyclocross chainwheel set (w ith 170 mm cranks, pedal hole ¢ 9/ 16 F. and chai nring for chain 1/2"x3/32" [2 mm]). Specify the number of teeth of chainring available from 42 to 57 teeth, 1049 / A « Super Record» road chainwheel set (w ith 170 mm c ranks, pe dal hole ¢ 9/16"x20 F. and chainring for chain 1/2·x3/32 ~ [2 mmJ). Specify the num be r of teet h of chainring available from 42 to 57 teeth. On request c ran ks 16 5-16 7,5- 172,5-175- 177,5-18 0 mm long are supplied, 1049 / 5 Triple chainring chainwheel set (wi th 17 0 mm cranks, pedal hole ¢ 9/ 16"x20 F. and chainring for chain 1/2"x3/32" [2 mm] with fixed 36 toothing). Spec ify the num ber of teeth of the other tw o chai nrings available from 4 2 to 57 teeth. On request cranks 165-16 7,5-172 ,5- 175 -177,5 -180 mm long are supplied, 1049 « Reco rd» road c hainwheel set (wil h 170 mm cranks, pedal hole ¢ 9/1 6"x20 F. and chainring for cha in 1/ 2"x3/32" [2 mmJ) . Specify the num ber of teeth of cha inring available from 4 2 to 57 teeth. On request cranks 165167,5-1 72,5- 175- 17 7,5-180 mm long are supplied, 105 1 «Record» track chainwheel set (with 170 mm cranks, pedal hole ¢ 9/16"x20 F. an d chainring lor chain 1 / 2 ~x l /8 " [3 mm)) . Specify the numbe r of teeth of chainnnq availabl e from 44 to 56 leeth. On req uest cranks 165-167 .5-1 72,5 -175 -177 ,5-180 mm long and chainring for chain 1/ 2"x3/ 32 " (2 mm ) are supplied, 0305 « Gran Sport» road chainwheel set, 116 mm (w ith 170 mm cranks, pe dal hole ¢ 9/ 16"x20 F. and chainri ng for chain 1/Tx3/32" [2 mmJ) available as follows: 35, 36 , 3 7, 38, 39, 40, 4 1, 4 2, 4 3, 50, 5 1, 52, 53 teeth, 0306 «Gran Sport» road chainwheel set. 1 16 rnrn. with t rip le chainring (with 170 mm cranks, ped al hole ¢ 9/ 16~x20 F. an d chainring for cha in 1/ 2"x3/ 3 2" [2 mmj), availab le as follows: 35, 36, 37 . 38, 3 9 , 40, 4 1. 4 2, 4 3, 50 . 51 , 52. 53 teelh, 4 151 «S uper Record " trac k c hainwheel sel, (w ith 170 mm cranks, pedal hole ¢ 9/16"x20 F. and chainring for chain 1/2"x 1/8" [3 mm]). Specify the number of teeth of chainring available from 44 to 56 teeth. On request cranks 165-167,5- 172,5-175-177,5-180 mm long an d chamrinq for c hain 1/ 2"x3/ 32 " (2 mm) are supplied . Mx20 From the aeronau tics eme rges the concept of need of lightness combined with the maximum safety. The manufacturing p rocess of Campagnolo cranks, the raw materials employed, the heat treatment used, follow the same standards of the civil and military aeronautics, starting from the purchase of Ih e raw material. They are oblained w ith a pressing process of aeronautical typ e light alloy and are wo rked on all surfaces. Their reliability degree follow s the same concept of the aerop lanes: to an accurate ca lculation of the technical parameters follows the application of safety coefficients w hich can g uaranlee the reliability also under conditions of wo rk heavier than those simu late d. The working of all the surface g ives to the cran k a hig h prec ision degree; the weight and balancing are steady for each piece and the squareness among the rotating spi nd le, the pe dal run and the ring toothing on wh ich the chain slides are perfect. The foot lea ned on the pedal follow s a cy lindrica l and non co nical run, the chain does not receive lateral inclinations. The shining finishi ng of the surface, besides giving a pleasant look, allows a strict selective control. 39 < < < , - - -, ,, - - - --, -, , ,, , < < • ,, > > <" ( 1049/A 1049 - - 1051 40 4151 • • No more available ,, e , , ( , 1049/5 10 48/4 • ,, 030 5' --- • • • , ) • 0304 ' 0306 ' 41 SUPER RECORD and RECORD ROAD Chainwheel set Components 751 R H. road crank (comp lete with 75 6 cover) 170 mm long . On requesl the follow ing sizes: 165-167,5- 172 .5175-1 77.5- 180 mm long are supplied, 752 LH . road crank (com plete wi th 75 6 cover) 170 mm long . On req uest the following sizes : 16 5-167,5 -172 ,5-175- 177,5-180 mm long are supp lied. 753 ... Record .. road chaiming tor chain 1/2·x3 /32 - (2 mm). Specify the number or teeth of cha inring available from 4 2 to 57 teeth. 753/A .. Sup er Record .. road c hainring for chain 1 /2 "x3 /32 - (2 rnm). Spec ify the number of teeth of chainring available from 42 to 57 teeth. 754 Road chainwheel fastening sc rew, 755 Nut for road chainwheel fastening sc rew, 756 Crank cover plate. 753/A '. 751 756 42 fi e~ 755 754 752 SUPER RECORD and RECORD TRACK Chainwheel set Components 756 Crank cover plate, 757 R.H . track c rank (complete wi th 756 cover) 170 mm long. On req uest the following szcs: 165-167,5-1 72,5- 175-177.5-180 mm lon g are supplied, 758 L.H. trac k c rank (complete w ith 756 cover) 170 mm long. On request the follow ing sizes: 165-1 67.5- 172,5-175-1 77.5 -1 80 mm long are supplied, 760 • Reco rd .. track c hainring for chain t l2·xl /S- (3 mm). Spec ify the number of teeth of chainring available from 44 :0 5 7 teeth, l60/A .. Supe r Record - track c hainring for c hain 1/2·xl /S - (3 mm). Specify the number of teeth of cnain rin q available from 44 to 57 teeth , 76 1 Track chainw heel fastening sc rew, 762 Nut for track c hainw heel tas:ening screw. 760 760 / A ~ \ ' • 756 ~!; 761 ~ 1:1 762 757 43 GRAN SPORT road Chainwheel set Components 3322/A5 «Gran Spo rt » R.H . crank, 144 m m (com plete with 75 6 cover) 1 70 mm long , pedal hole ¢ 9/ 16"x20 F., 3322/A5 " Gran Spo rt » R.H . c rank, 11 6 mm (complete with 756 cove r) 170 mm lon g , pedal hole ¢ 9/1 6"x20 F., 3321/AS « Gran Sport» L. H. crank. (co m plete with 756 cover) 1 70 m m long, pedal hole ¢ 9/16"x20 F. , 756 Crank cover plate, 754 Chainw heel fastening sc rew, 755 Nut for chainw heel fastening screw, 753/GS Road chainring, 144 mm, lor c hain 1 / 2 ·x 3 / 3 2~ (2 mm). Specify th e num ber of teeth of c hain nnq available from 42 to 57 teeth. 753/GS Road chainring , 116 mm for chain 112"x3t 3 2" (2 m m) ava ilable as follow s: 35 -36 -3 7-38 -3 9-4 0-4 1-4 243 -50- 51 -5 2-5 3 teeth. 753/GS-11 6 753 / GS-144 • • • 756 3 33221A5-ont.11 6 44 3322/ A5-int. 144 755 ~ 754 332 11A5 Triple chainring and cyclo-cross chainwheel set Components 75 1 R.H. road c rank (c omplete with 75 6 cover) 170 mm long. On request the follow ing sizes : 165-16 7,5· ' 72.5, 75-17 7,5- 180 mm long are supplied, 752 L.H. road crank (co mpletew il h 756 cover) 170 mm long. On req ues t the following sizes: 1 6 5 - 1 6 7 , 5 - 1 7 2 , 5 · 1 7 5 ~ 1 7 7 , 5 · 1 8 0 m m long are supplied, 753 Road c hainring for chai n 1/ 2"x3/ 32" (2 mm). Spec ify the number of teeth available from 4 1 to 57 teeth, 753/1 Cycle-cross inner flange. Spe cIfy diameter. Supplied w ith diameter of 18 6-' 98 -2 10-22 2 rnm. 753/2 Cycle-cross outer flange. Specify dia-n eter. Supplied with d18meter oI1 8 6- 198 -21 0-222 mm , 754 Road chainw heel fastening screw, 755 Nut for road chainw heel fastening sc rew, 756 Crank cover plate. 830 Triple chainring and cycto-crc ss fixing bolt. 831 Nut for ~ rj ple c hain rinq and cvcto-cross flxing bolt. 832 Space r for trip le chamring and cy cle-c ross. 761 Chainwheel fastening sc rew, 804 Special c hamrinq for chain 112-x3 /32 - (2 mmj with fixed 36 toottunq. 818 Triple chainring spacer, 81 9 R.H. crank for special triple chainring (complete with 756 cover) 170 mm long. On request cranks 165- 16 7,5- 172,5- 175- 177 ,5- 18 0 mm long are supplied. ~ -r' ;' ../,.1\-'/'../\- \..-J' ) O(~ '- , n 753 819 751 I . 1\ C' 832 831 _. 830 iJ 752 753 753 • g 804 761 (D 819 755 -, I - 754 CO 753/ 1 ~i -- ~ 6' 8 755 -_,. 756 616 761 45 BOTTOM BRACKET SETS 1046 1046/A 1046/3 1046/4 3331 5031/00 • " Record» road and track bottom bracket set, « Nuevo Record » road bottom brac ket set. « Record » road triple chainring bottom bracket set, «Reco rd » road cycle-cross bottom bracket set, «Sport » road bottom bracket set, «Gran Sport » triple c hainring bottom bracket set. Mean ing of ..AXLE MARK ..: - the firs! number indicates the bracket width - .. p .. Indicates track - «55 .. indicates road - ..C .. indicates c ross On request we supply cups and lockrings w it h thread increased by 0,5 mm. -c -e ~ -o < s: • • • • s: E ~ ~ G G ~ < < < - -- G 0 0 I u, Z « •N X ~ 0 ~ G I I I I ' -x U ::J ~ m l ~ ~ ,--~___f f t & -o < ~ • •< s: s: - ~ G 0; < j---- . lu: • x , N ~ 0 u ~ ' "s- , THREAD TYPES TOTAL AXLE MAFlK TRACK ROAD TRIPLE \ CROSS \ ROAD 46 \ AXLE LENGTH BRACKET W IDTH .' 65-P·l10 1. 68-P-ll 0 14,5 66 3.' 68-P-l20 17 66 3. 65 7o-P- t 20 ,. 7. 68-55 17 66 70-55 17 7. 68·55 X 3 eo 66 70-5 5 X3 "'C ,",c I ""- . ~ts 1T. 1 . r 7. 66 7. , • 1. mm. 104 15,5 • 105 17 • 109 • 109 ,. ~ .. ~ .~ 19 • S mm . 11 2 --I • ~ 29_ M mm. 123 • 27 1~ ::"i --I , 11 3 .I '" mm. 115.5 • 115.5 BOTTOM BRACKET SETS Components 744 Axle fo r .. Record .. road and track bottom bracket set, 744/A Axle for .. Nuevo Record - road bottom bracket set. 744/1 Axle for triple chainring bottom bracket set. 744/2 Axle for cyctocross bottom b racket set, 745 Fixed cup (specify thread), 745/A .. Nuovo Record .. fixed cup (specify thread), 746 Adjusting cup (specify thread), 746/A .. NUQVO Record» adjusting cu p (spec ify t hread), 747 Lockring wi th norm al 3,5 mm thick ness (avai lable also 4 or 4 ,5 m m thic k) (sp ec ify thread) , 748 Cran k fixing sc rew, 749 C rank fixing wash er, 21 00 Set (1 1+ 11) spec ial ¢ 1/ 4 · balls, se lec ted with 11 100 0 of m m tolerance, 2110 Slee ve. 2110/1 Cone for sleeve. 3332 Axle for .. Gran Sport .. bottom bracket set. 3332/1 Axle for .. Sport» trip le c hain rinq bottom brac ket set. \ 211011 2110 2100 " 748 Q i, ~ 749 747 • ~ ) ~ 748 749 744/ A 7461A 8 ~., ," 0 I 745/A )l J 74412 . -&..~~ , ' 0 0 ". 744 / 1 749 747 746 748 ~., ••• 749 I 748 745 744 748 o o 749 3332 749 747 746 748 745 333 2/ 1 47 HEAD SETS 1039 1040 10 4 0 / A 4041 4141 4141 4041 .- .. >~ " 4042 730 0072 'I, ~ , ,~ .....__. - ~ i~o . • .... " - -, -, » 'C'. 4042 7300072 4142 4044 4 143 4045 @ ",~.qr.;,,, .f 4047 210 1 (~) 0- ,. . '''-'' , ---------- ," .•) ~ (~') ~'i< 4.~~ \~~r .~ , " 4046 48 • « Record » road head set, «Record » trac k head set, «Spo rt" road head sel complete w ith 7300 109 washer, « Super Record » road head set, « Super Record » track head set. ~-M! ( "-F" ~ , 4144 4145 2102 ) tE:~ - ,JI. HEAD SETS Components 68 1 lock ing nut (specify thread), 682 Locking washer, 683 Road top race (specify thread). 684 Road top cone (0.5 mm larger diam eter available) , 685 Road bottom race (0.5 mm larger diameter available), 686 Road bottom cone (small diam eter available) , 687 Track top race (specify thread) , 6871A .. Sport .. top race (specify thread), 688 Trac k top cone (0,5 mm larger d iam eter available), 688/A «Sport» top cone (0 .5 mm larg er diameter available), 689 Trac k bottom race (0, 5 mm larger diam eter available), 689/ A .. Spo rt .. bottom race (0 ,5 mm large r diam eter availa ble). 690 Track bottom cone (small d iam eter avai lable), 6901A .. Sport .. bott om cone (small diam eter w available), 2101 Set (20+20) special ¢ 3/16 ba lls selected w ith 1/ 10 0 0 01mm tolerance, 2102 Set (24+2 4) special ¢ 5/3 2 " baits selected with 1/1 000 of mm tolerance, 4042 «Su per Record »fcckinq nut (spec ify thread), 4044 «Super Rec ord " road top race (specify thread), 4045 «Super Record" road top co ne (0 ,5 mm larger diameter availabl e), 4046 «Supe r Record» road bottom race (0, 5 mm larger diameter available), 4047 «Supe r Record " road bottom cone (small d iamete r available), 4142 « Super Record » trac k top race (specify thread), 4143 .. Super Record » trac k top cone (0,5 m m larger d iameter available), 4144 «Su per Record» trac k bott om race (0,5 :TIm larger d iameter availab le), 4145 .. Super Record» track bo ttom cone (small diameter available), 4145 .. Super ae com- track bott om cone (small diameter available), 7300072 «Su per Record- locking washer, 7300109 .. Sport - headset wa sher. 1039 1040 1040/A 49 PEDALS 4021 4121 1037/A 1037 1038/ A 1038 3700 Pai r « Supe r Reco rd » road pedals, Pai r «Super Record» trac k pedals, Pair Superlight «Reco rd» road peda ls, Pair «Record» road pedals, Pair Su perlight « Record» track pedals, Pair «Record » track pedals, Pair «Gran Sport» road peda ls. • • No more available. • 4021 103 71A 50 '.... ,' 4121 1038/A ,," RECORD and SUPER RECORD Pedals Components 89 toe clip screw fo r «Super Record - . «Record -. u Gran Sport .. peda ls, 669 L.H. pe dal axle with thread ¢ 9/ 16·x20 E, 670 R.H. pedal axle with thread ¢ 9/1 6·x20 F.. 672 pedal inserted race (av ailable also in oversize), 673 toothed washer, 674 pedal axle cone, 675 pedal axle lock nut. 676 toe clip bolt, 677 toe clip washer, 678 dust cap, 679tA supertiqh t pedal cap . 2103 sel (48) special ¢ 5/3 2- balls selected with 1/1000 of mm toleranc e. 4024 «Super Record .. RH . titanium pedal axle. 4025 «Super Record .. L.H. titan ium pedal axle. 4026 pedal inserted race (available also in oversize), 4027 pedal axle cone, 40 28 set (64) special ¢ l IS- balls, selected wi th 11 1000 of mm tolera nce. 672 672 669 ~ ~ 676 69 673 4026 o • 677 t~=~:( 89 -- 679/A ~ 2103 lI~t -1Jf3I 4027 4026 675 678 677 t:::e[_ ~ 673 674 675 !!II 670 678 4028 lt91]1 ~ 4025 4024 51 GRAN SPORT Pedals Components 89 toe clip screw for « Super Record» and «Gran Sport» pedals, 673 toothed was her, 6 75 ped al axle lock nut. 677 toe c lip washer. 7146008 dust cap , 679/ A superli ght pedal cap, 2103 set (48) special ¢ 5/ 32" balls, selected with 1/ 1000 of mm tolerance, 7131053 pedal inserted race, 674 pedal axle cone, 728 10 67 L.H. pedal axle with thread ¢ 9/16"x20 F" 7281066 R H. pedal axle w ith th read ¢ 9/16" x2 0 F. , 7131053 71 31053 674 (0 (J 673 675 • 7146008 • tC 677 69 2103 7 7281 067 52 7281066 679/A Toe Clips and fixing shoe plates 0990105 <Campaqnolo» set toe clips w ith fixing shoe plate. 0 99 0/ 0 6 «Campaqnolo» set superlight toe clips wit h fixing shoe plate. Both types are avai lable in the following sizes: small. medi um, large, 0 1 10 0 5 6 Fixing shoe plate set, consisting of 7300002 was hers, 7350002 screws and 7283021 fixi ng shoe plates. 0990106 7350002 ~~ 0990105 ~ ~ 0110056 • 7300002 ,. / 7283021- I/~ ~.' ,.: 53 SEAT PILLAR 1044 3800 4051/1 .. Record" seat pillar, 130 and 180 mm long, ..Gran Sport» seat pillar, 13 0 and 180 mm long, .. Nuovo Super Record .. seat pillar, 180 mm long. • All the seat pillars are available in the follow ing diameters: 25 -25 ,8-26-26,2·26,4 -26.6-26,8-27-2 7,2· 27,4. 405 111 54 SEAT PILLAR Components 698 front bracket, 699 rear bracket, 700 bolt nut. 701 L.H. side support. 702 R.H. side support. 703 seat pi llar fixng and adjusting bolt, 1160/01 convex washer for .. Super Record .. seat pillar, 1160/02 seat pillar sliding supoort. 1160/03 seat pillar fixing bracket, 1160104 .. Super Record .. seat pilla r sc rew, 7300107 -Noovo Super Record- seat p illar washer. 698 699 ~~ 703 I ~ ~ '1 60/03 1160 /02 1160 /01 V 702 73001 07 • 1160 104 55 BRAKES 4061 4061/1 2040 2040/1 118 117 .. Super Record " 52 mm brakes set with drilled levers and cables, «Super Record » 4 7 mm brakes set with drilled levers and ca bles, «Record» 52 mm brakes set with levers and cables, «Record» 47 mm brakes set with levers and ca bles, «Gran Sport» 52 mm brakes set with levers and cables, «G ran Sport.. 4 7 mm brakes set w ith levers and cables. On request the brakes set are supplied in the allen bolt version. 56 • 4061 • • • • 4062 • • • •• 2001 , • • • • • • 4062 • •• 2000 2040 2030 2030 , 2000 2001 117 • 0118028 0116010 I 0118028 I 011 6011 57 BRAKES SPARE PARTS 2002 rear center bolt fixing nut. 2003 w ash er, 2004 cable clamp washer, 2005 cam , 2006 Quick release cam lev er, 2007 adjusting nut. 2008 cable clamp bolt. 2009 adjusting screw. 2010 brake block. 201 1 tension spring, 2012 front brake center bolt. 20 12 /1 rea r brake center bolt, 2013 cable clam p, 20 14/0 R.H . brake shoe, 2014/5 L.H. brake shoe. 2015 frict ion washer. 20 15 /1 inner frict ion was her, 2016 domed nut, 20 17 cam locking nut. 2018 locking nut, 2019 front stirrup arm, 20 19 / 1 front stirrup arm for small brake. 2020 rear stirrup arm, 2020/ 1 rear stirrup arm for front sm all brake. 2020/2 rear stirrup arm for rear sma ll brake. 2021 knurled nut. 2022 bra ke shoe nut. 2024 adjusting rubber, 2026 front b rake outer casing (61 c m),2027 rear brake ou ter casing (11 9 em ) 2028 front inner ca ble ( 73 em) , 2029 rear inner cable (13 1 cm ), 2031 leve r hoo d, 2032 control lever (com plet e with 203 5 cable holder), 2033 brake lever clip, 2034 leve r pivot pin, 2036 grub screw, 2037 cl amp nut. 2038 b rake lever bush.20 39 rubber lever hood , 20411A se rrated washer for rear brake, 2041 1A serrated washer for front brake , 2043 rubber for small brake leve r, 4063 drilled lever (comp lete With 20 35 ca bl e hold er). 58 l\V!) , G' 2043 - ~ 2020 /2 ( ,• , 2009 B @ =" = ®:= 2ll41/ A 2003 '. " ....... "Jl 2002 21112 2003 2012/ 1 ~ @(i) = ( "'¢= 2002 2007@ 0 2024 2015 _ 0 ~ L.-.~J .~ 2041/ A " I' 2020 ! 21111 201 5/1 r': , ~y-, . ( @ 21113 L /. 2008 J -, \ .. ~ " <:, ~ .~ 2022 ~~ I 200 3 , 20 14/ 5 2014/ 0 2003 <, " ,~ 21118 2017 la;:::-" So "'-('0) 2OO5 2004 '~ 2006 20 16 ' __' '*" (' . : ., ce 1~ 2021 2019 2022 2039 -., - ••, 2031 11 2037 if' '" 2029 ~ • •• ~ •• " , .'.' • 02034;::0 0 - . e ~ V IJ -::wr7;JJ 2033 2036 2038 F , J 2028 2038 I I. I \, 202 7 , • • • 4063 21126 2032 59 FREEWHEEL 0521/00 • Tool kit for fitting and unfitting freewh eel, including : 0520 /10 Tool fo r fitting freew heel body, . 0520/20 2 keys with chain for freewheel sprockets, 0520/30 Complete key with profile freew heel teeth . 0520/40 Complete key for unfitting freewheel, 0520 /41 Sleeve for unfitting freewh eel key, 0520 /42 2 grains for unfitting freewheel key, 0520/40 Complete key for unfitting « Campaqnolo» freewheel from hub , 0520/41 Sleeve for unfitting freewh eel key. Standard arrangemen ts fo r 6 sproc ket freew heels : , 12-13- 14- 15 -16- 17 13-14 -16-18-20-22 12- 13-1 4-15- 17- 19 12 - 13-1 4-16 -18-20 13- 14-15-16- 17- 18 13- 15-1 7- 19-21 -23 13- 15- 18-20-22-24 14- 15- 16- 17- 19-2 1 14- 15-17- 19-21 -23 14- 16- 19-22-24-26 13-14-15-1 6-18-20 13-14-15-1 7- 19- 21 0520/4 1 A B DE "" """ "" "" "" " "" ," "" " " .." c DE ","" """ "" " F G "" " " ... Drawing indicates all available toothing 60 """ "" 0 520/40 BMX 806/ BMX .. BMX .. chainset wi thout 8 .8.. 305/BMX .. BMX .. pair pedals w ith spec ial toothing cag e, 821/BMX .. BMX .. large flange, solid spindle, fixing nuts pa ir hu bs. 822/BMX .. BMX .. small flange. solid sp indle, fixing nuts pair hubs. The above " BMX » items are available in silver. light blue. gold colours. .• ,• . 8 21 /BM X • 305/BMX 82 2/ BMX • • 806/ BMX 61 SUNDRY SPARE PARTS 80/1 gear fixing plate, 80/2 fixing plate tor « Super Record » <Nuevo Record " .. Rally I outinq »« Gran spo rt- and «980 .. gears, BOlA fixing plate for "Valentino Extra» gea r, 124 fixing sc rew, 125 clamp nut, 763 standard sprocket fo r normal c hain 1/ 2"xl l8 " (3 mm). Sproc kets available with 12 -13 -1 4 -15- 16 teeth. On request sprockets for chain 1/ 2"x3 /32 " (2 mm) are supplied, 763/A superlight sprocket for normal chain 1 / 2 ~xl / 8 · (3 mm). sproc kets available with 13-14 - 15-1 6 teeth. On requ est sprockets for chain 1/2 "x3/32 (2 mm) are supplied, 914 cla mp nut. 1030/2 pump connecto r with square base. 3346 superlig ht pum p connector with sq uare base. 3385 100 grs. lin special grease, 3386 500 qrs. tin spec ial grease, 3387 1 kg. tin special grease. t·, 80/1 3346 3385 1030/2 9 14 125 124 -. 124 \F'3 3386 80/ A 62 80/2 SUNDRY SPARE PARTS 145 gear cable fo r hand lebar control, 171 clip bolt, 172 nut for clip bolt. 218 front c hanger cable for hand lebar conuot ecazt fixing clip bolt. 617 stainless steel outer casing for b raze -on gear, 619 oute r casing ferrule. 620 spindled ferrule. 622 stainless steel outer casing for gear, 623 stainless steel outer casing for f ront changer, 625 stainless steel outer ca sing for gear and front changer handlebar controls, 626/A twin gear cable cli p, 6271A dow n tu be gear clip, 629 top clip for gea r and front changer handlebar cont rol, 636 horizontal stay clip , 649 brake cable clip, 652 safety cab le, 777 nut. 201212 rear brake center bolt with modified axle, 2045 brake outer casing ferrule. 629 626/A 627/A , n7 2045 609/1 G - l 145 : I , I 61 9 '-EO' 620 I::) 652 625 •'J.~ - • i4 171 I 622 649 := 218 .. ~ I . . I. . . I 2012/2 623 , 617 t 0 172 63 TOOL CASE REDUCED Watching a mechanic specializ ed in racing bicycl es w hile he assembles on the frame all the components to make of it a winning bicycle, one may realize how many specific tools to overhaul the frame on the coupling points. how many calipers to test the wo rk mad e and the perfect squ aring of all parts, are needed. Campaqnolo has m anufac tured , w ith the utmost prec ision , all the set of these tools and calipers to make a perfect bike. W hen a mec hanic or a fan is in a position to use, as he must, atl the kit tools. the bicycle that originates is a « Master» bicycle. The reduc ed version si destined only to the filting of the headset and of the bottom bracket set. , 3381 64 TOOL CASE COMPLETE . • / 3380 • 65 TOOLS CONTAINED IN KITS 143/2 T wrench 6 /8 m m, 704 insert for tool fig. I. 704/1 reduc ing insert for 13 teeth freewheel tool fig . I (it is supp lied on ly on specific request), 710 pedal wrench, 712* bottom bracket loc krinq and headset tool. 712/ f * bottom bracket head set an d L.H. cup tool, 712/2* p in for 712/1 tool, 712/3* spacing spring for headset too l. 7 13· botto m bracket R.H . cu p and pedal axle tool, 714 fork colum n die (s pecify thread), co m posed by : 714/1 fork colum n die (specify thread) and 714/2 die hold er body, 718 crow n race cutter composed by : 718/1 * crown race mill, 71812* Gutter holder with rotation leve r, 718/3* guide ring, 718/5* tension spring, 718/6* threaded lockring (specify thread), 719 brush, 721* bottom brack et doubl e tap (specify thread) co m posed by : 720* rotatio n leve r, 721/1 * tap body wi th stem, 721/2* tap body wi th stem g uid e hole, 721/3* tap lock ring nut. 721/5 spa re tap (specify thread) , 722 * headset cup punch , 723 headset cup remover, 725* bottom brac ket fac e cutter, com posed by : 724/1 * inner guide threaded sleeve for 725 (specify thread), 724/2* outer gu id e t hread ed sleeve for 725 (sp eci fy thread), 725/1 * m ill, 725/2* cutter hold er stem with rotation lever, 725/3* tens ion spring, 725/4* washer, 725/7''' threaded loc kring, 725/8* toothed washer, 729* fork crown race remover, 730* key for sleeve 724/ 1 and 724/2 , 73 1 hea dset jig , 732 fork crown jig, 733 hea d race m ill com posed by : 725/8* toothed wa sher and 728 sleeve for fitting head set cups wi th 733 tool, 0260/02* double hea d race m ill, 733/3* cutter hold er with rotation lever, 733/5* washer, 733/6* tension spring, 733/8* loc kring stirrup, 733/14* cen traliser sleeve, 767* .. L .. shaped chainwheel alle n key 5 mm, 768 chai nw hee l screw peg spanner, 769* cotterless bott om bracket axle spanner, 770* crank extractor, 771 double sadd le spanner, 793/A R.H . bottom bracket tool co m posed by, 793/1 too l holder body with rotation lever, 793/2 36 mm tool, 793/3 cu tter sleeve, 793/4 tube for tool rotatio n, 2025 special brake spanner, G straight edge for the alig nment of the rudder ped als, H back stay tool for the perfect aliqnrnent of fork ends, compos ed by: H/1 stem with lever, H/4 spacerfor 120 mm width, H/4A add itional space r for 125 mm width (to be coupled w ith H/4 spacer), H/5 cup, I tool for 14 teeth and other freewheels, composed by : 1/2 ring nut lever hol der, N wheel d ish tool for c hec king t he centering of the rim to t he locknuts of hu bs, P axle holding tool, steel tool for cones and locknuts (s ize 13 -14 m m) . On request size 15-1 6 mm is sup pl ied , R back stay too l for c hecking the R.H. fork end eyelet. com posed by : R/ 1 screw, R/4 rotating rod , R/6 spind le w ith lever. a All tools marked wi th an asterisk (*) are those contained in the 338 1 reduced 1001kit. 712 , 2 <:;:.~:::==]<'2"'~"~'"~'~ *~ c 712 /1 D / 714/ 2 71 8 731 713 712 / 719 732 718/ 2 L-- '3E1I _ [" 722 ~, • 723 66 , 0 n 712/3 729 730 730 • , - -, - 716/ 1 . ( 721 704/ 1 0> N 721{1 721/2 721/ 5 721/5 R 1 704 I I . ~ (g:-t Fe) I 721 /3 793/ 1 1{ 2 720 - -. I 725/ 4 I t,{ ~ 725/2 I 725/3 J ' 724{1 724/ 2 793/2 - - -- - 793{4 725/ 8 ~' \ \,~ r-'i'-;;;( . ~ R 6 '! 725 725/1 793/3 / 721/ 3 -720 , 793/A 725/ 7 c 769 G H His H/4A I / H{ 1 768 mm. 120 mm.l 767 770 His H H/4 A mm l 0 0 H'4 H{1 67 CAMPAGNOLO SPECIAL TOOLS P axle hold ing tool, a steel tool for cones and locknuts (size 13- 14 mm). On req uest size 15- 16 mm is s u pp l~ed . 143/2 «T.. wrench (size 6-8 mm), 705 R. H. la p ¢ 9/ 16·x20 F.. 706 L.H. tap ¢ 9/ 16"x20 E, 707 lap ¢ 1Ox26 E, 708 tap M 5xO,B, 70 9 tap M 3 xO .5. 710 pedal w rench. 73 6 saddle alignm ent tool to keep in position the saddle w hen replacing the seat pin and th e p in, 77 1 doubl e saddle spa nner, 110' multip le pedal spanner composed by : 110111 multiple head (15· 16- 17 mm), 110113 multiple spanner lever, 2025 special brake spanner. ~ 736 771 771 F , , Jl : r 1101/1 705 --, I 706 , A 707 •• 708 1101 143/ 2 8 • 71 0 •• •• • ••• • 709 y, ,I I, J ' ~'; "-,. I ~t il '0 a 68 2025 p 1 (,) 1101/3 ROAD CHAIN LINE ~~~;;==2 LJ \ _. " '- - I I. (~~ . _ ,---r-- ~. l UI . I -=- ----"c~; ' N' -- • i . m , - I 0 '-'-'-'-'-'-'---;C:;E:~ T~E L:':C": -'- -----. ------ ----- sorro« BRACKET _ --------- ----- --- '- '+ +- - - « I I -- i • REAR HUB WIDTH WIDTH .. A - 68 i20 _ _-,7 0 120 74 120 - - - 29 29 '::: 29'-- 43 ,5 - 43 ,5 - -- 43,5 TRACK CHAIN LINE I : :: : I • --- - -- -- -- cHii;';l;NE - _. I o --=-..::--- - . BOTTOM BRACKET WIDTH I 65 _~~- 110,-- iXl _ 1- /. _ I ' < --- REAR HUB wrOTH ..A.. ,L_-:;-' ----.,;;,~;;. • CENTRE LINE --- -- • SPROCKET WIDTH ..B .. CHAIN LINE 215_-~~:::_ _ _ _ 2 1.5 -c40 _ _68 110 40 68 120 24 42,5 70 120 24 42 ,5 69 GEAR TABLE • Num ber of teeth on sprocket wheel 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 35 6.23 5.75 5,34 4,98 4.67 4,394,1 5 3,83 3,73 3,56 3 ,39 3,25 3,11 2,99 2,87 2.76 2,67 2,57 2,49 2,41 2,33 36 37 38 6,40 5,9 1 5,49 5,12 4,80 4,52 4,2 7 4,04 '3.84 3,66 3,49 3,34 3,20 3,07 2,95 2.84 2,74 2,65 2,56 2,48 2,40 6,58 6,07 5,64 5,26 4,93 4,64 4 ,39 4.15 3,95 3,76 3,59 3,43 3,29 3,16 3,03 2,92 2,62 ;2.72 2.63 .54 2,46 6,76 6,24 5,79 5,4 1 5,07 4,77 4,50 4,27 4,05 3.84 3,68 3,52 3,38 3,24 3, 123,00 2,89 2,79 2,70 2.6 1 2,53 39 40 41 6,94 6,40 5,94 5,55 5,20 4,90 4,62 4.38 4,16 3,96 3,78 3,62 3,47 3,33 3.20 3,08 2,9 7 2,8 1 2,77 2,68 2,60 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 70 Num ber of teeth on rear chamnnq 12 7,12 6,57 6, 10 5,69 5,34 5,02 4,74 4,50 4,27 4,07 3,88 3,71 3,56 3.42 7.30 6.73 6,25 5,84 5,4 75,15 4,86 4,60 4,37 4,1 7 3,96 3,80 3,64 3,50 7,47 6,90 6,40 5,96 5,60 5,27 4,98 4,72 4,48 4,27 4,07 3,90 3,73 3,58 7,65 7,06 6,56 6,12 5,74 5,40 5,10 4,83 4,59 4,3 7 4,17 3,99'3,82 3,67 7,83 7,23 '6,71 6.26 5.87 5,52 5,22 4,94 4,70 4,47 4.27 4,08 3,9 1 3,76 8,01 7.39 '6,86 6,40 6,00 5,65 5,34 5.05 4,80 4,57 4.37 8,18 7,55 7.0 1 6,55 6,14 5,78 5,45 5,17 4,91 4,67 14,46 8,36 7,72 7,17 6,69 6.27 5,90 5.57 5,28 5,02 4,78 4,56 3,28 3,16 3,05 2,94 2,83 3,36 3,24 3.11 3,01 2,92 3,45 3,33 3,20 3,09 2,96 3,53 3,39 ,3,28 3,16 '3,05 2,75 2,66 2,81 2.75 2,88 2.79 2.96 2,86 3,61 3,48 3,35 3.243,1 3 3,03 2.92 4,1 8 4,00 3,84 3,69 3,56 3,43 3,30 3,20 3,09 3,01 4,27 4,09 3,93 3.78 3,62 3,50 3,39 3.26 3,16 3,07 4.36 4,18 4.0 1 3,86 3,71 3,58 3,45 3,35 3,24 3.13 4,45 4,27 :4.1 0 3,943,80 3,65 '3.54 3,4 1,3,28 3,20 8,54 7,88 7,32 6,83 6,40 6,03 5.69 5,39 5,1 2 4,88 4,66 8.72 18,05 7,47 6.97 6,54 6.15 5,81 5,50 5,23 4,96 4,75 4,55 4,36 4.1 8 4.02 3,86 3,73,3.60 3,48 3,37 3,26 8,90 8.21 7,63 7.12 6.67 6.28 5,93 15.62 5,34 5,08 4.85 4,64 4,45 4.27 4.10 3,94 3,80 3.67 3,56 3,43 3,33 9,07 8,38 7,78 7.26 6,81 6,40 6.05 ' 5,73 5,44 5,18 4.95 14.73 4,54 4,35 4.19 4,03 3,88 3,75 3,62 3,52 3,39 9.25 8,54 7,93 7,40 6.94 6,53 6,17 5,84 5.55 5,29 5,04 4,83 4,62 4,44 4.27 4,12 3,92 3,82 3.69 3,58 3.45 9,43 8,70 8,08 7.54 7.07 6,66 6,29 5,95 5,66 5,39 5.14 4,9214.71 4,52 4.35 4,18 ,4,03 3,90 3,77 3,65 3,51 9,61 8,87 8,23 7,69 7,20 6,78 6,40 6,07 5,76 5,49 5,24 5.01 4,80 4,61 4,43 4,27 4,12 3,97 3,84 3.7113.60 9,78 9,03 8,39 7,83 34 6.91 6,52 6,10 5,87 5,59 5,34 5,10 4,89 4,69 4.51 4,34 4,19 4,05 3,9 1 3,79 3,66 17. 9,97 9,20 8,54 7,97 7,47 7,03 6,64 6,29 5,98 5,69 5,43 5,20 4,98 4,78 4,60 4,41 4,27 4,1 2 3,99 3,86 3,73 57 10,14 9,35 8,68 8,11 7,62 7,15 6.76 6,40 6,08 5.78 5,53 5,29 5,06 4,86 4,67 4,50 4,33 4,20 4,05 3,92 3,80 58 59 10,31 9,52 8,83 8,26 7,72 7,28 6,87 6.51 6. 19 5,89 5,63 5,38 5,16 4,95 4,76 4,59 4,4 1 4.27 4,12 13,99 3,86 10,50 9.69 8,98 8,39 7,87 7,40 7,00 6,64 6,29 5,99 5,72 5A8 5,25,5,03 4,84 4.67 4.50 4,33 4.20 4.05 3,92 60 10,67 9,86 9.158,54 8,01 7,53 7,11 6.74 6,40 6,10 5,82 5,57 5,33 15,12 4,93 4.73 4.56 14.41 4,27 4,12 3,99 • t • \Ita della Chlmica, 4 36100 VICENZA - Italia ecctete per azlonl Capitale SociaIe Lit. 16.000.000.000 N. 11558 Reg. Soc. Tribunale di Vicenza Telefonc 0444/564933 (16 linee con r.a.) Telefax 0444/565062 Telex 460074 CAMPA I Telegr. CAMPAGNOLO VICENZA Casella Postale N. 822