Professional - Arcair SLICE

Professional
slice® fire and rescue
cutting system
Professional
U.S. Customer Care: 800-426-1888 / Fax 800-535-0557
International: Phone 905-827-9777 / 905-827-9797
www.thermadyne.com/arcair
WO R L D H E A D Q U A RT E R S : 1 6052 Sw i ngl ey R i dge R oad, Sui t e 300 • St . Loui s, M O 63017 U . S. A.
Form No. 89-2800 ©2008 Thermadyne Industries, Inc.
www.thermadyne.com
Printed in U.S.A.
Cut through faster.
Save lives quicker.
Save lives with the Arcair® SLICE® Pack
• Perfect for forcible entry or victim extrication
• Rapidly cut through virtually any material
Get the right
SLICE Pack for you.
®
Choose from a variety of models.
Get it all with SLICE® Complete Pack
• Cut three times faster than any oxyacetylene torch
on three-inch mild steel
• No preheating for quick setup
• Burn through hinges and doors
• Melt deadbolt locks
The SLICE® Complete Pack comes in an aluminum
carrying case with everything you need to quickly
complete an exothermic cutting job. You’ll get the
torch, rods, striker, 12-volt battery with charger, 6”
collet extension and shield, regulator and an empty
55 cubic foot oxygen bottle.
Upgrade your Rescue Arsenal
Power up with SLICE® Battery Pack
Rescue More with Rapid Entry
•Completely portable and self-contained
•One or two-man carrying options
•Comfort-designed pistol grip
•Tough but lightweight shield for protection
•Easy oxygen control
Strike, Ignite & Burn in Seconds
•Oxygen and electrical power ignite the specially
designed SLICE® cutting rods
•SLICE® cutting rod burns as you maintain oxygen flow
•Exothermic reaction
•Continues to burn under water spray
The SLICE® Battery Pack comes in a rugged toolbox and
has all the basic items needed for tough cutting jobs.
You’ll get everything that comes with the Utility Pack
including the SLICE® torch, striker and exothermic
cutting rods plus a rechargeable 12-Volt SLICE®
Battery Box Assembly.
Get more Mobility with SLICE®
Cordless Striker Pack
The SLICE® Cordless Striker Pack uses two small leadacid batteries to supply a current surge sufficient enough
to ignite both the ¼” (6,4mm) and 3/8” (9,5mm) bare
SLICE® Cutting Rods. It includes one igniter and a
charger. Available in 120 volt, AC only.
Get the basics with SLICE® Utility Pack
Watch a video of the Arcair
®
at www.ArcairSlice.com
Slice® Pack in action
The SLICE® Utility Pack uses the exothermic cutting
process to cut, burn and pierce through virtually any
metallic, non-metallic or composite material. Packaged
in a sturdy toolbox, this system has all the basics needed
to perform tough cutting jobs. Just supply oxygen and an
ignition source and you’re ready to go.
Visit www.ArcairSlice.com for more information.