MTT20 MST8 MES34 - MEGA Corp., Inc.

SPECIAL MINEXPO EDITION
MESSAGE FROM THE PRESIDENT
Mega would like to invite you join us at the 2012 MinExpo
in Las Vegas, Nevada, September 24th-26th. Mega will be
located in the Central Hall in booth number 7389 at the Las
Vegas Convention Center.
Mega will be displaying
the MES34 elevating
scraper as well as large
scale models of our
MTT20 water tank and
MHT175 coal hauler.
This will be the first
public exposition of the
MES34 and we are very
proud of the way this machine has turned out.
In addition to our booth at
MinExpo, Mega’s MTT20 on a
Caterpillar 777 truck will be in
operation as part of Caterpillar’s
Product Demonstration Events
at their Tinaja Hills Training
Center the weeks before and
after MinExpo. Mega will have
a representative at Tinaja
during these events to answer
questions about the MTT20 or any Mega product. For more
information about attending these events, please contact your
local Caterpillar® dealer.
MTT20
MES34
Mega will also be introducing our latest spray system control
products for water tanks including our new Digital Spray
Control System. When outfitted with the optional
GPS-based Ground Speed Control option, this system is
capable of automatically
reducing, suspending and
resuming spraying based
on vehicle speed.
This
economical and versatile
system will be available for
application to a wide range
of machine applications
spanning scraper tractors,
WITH CAT621H
articulated and rigid frame
trucks, old and new.
MST8
RETIREMENT OF RALPH KERFOOT
WESTERN REGION SALES MANAGER
All of Mega’s sales & support people will be in attendance at
MinExpo to answer any questions you may have. We’ll have
paper & digital versions of all of our product literature available
as well as plenty of Mega gear to give away.
We are enjoying an outstanding year at Mega and we would
love to share our news and activities with you and learn about
you and your business as well – so if you are planning to attend
MinExpo, I encourage you to stop by and say hello!
Thank you for Thinking about Mega and we hope to see you there!
Jim Kunz
Specialty Haulage Solutions For Construction and Mining
While at MinExpo, Mega will be celebrating the retirement
of Mr. Ralph Kerfoot.
Ralph joined Mega in 2002
and served as Sales Manager in both the Western and
Southeastern USA regions. We are proud of the service
Ralph gave to Mega and we wish him and his wife Carolyn a
happy retirement!
MEET YOUR MEGA TEAM!
PLEASE CONTACT US WITH
ANY INQUIRIES OR QUESTIONS.
Jeff Linn
Director-Sales, Marketing
& Product Support
jlinn@megacorpinc.com
505-345-2661
John Stubbs
Parts Sales Manager
Regional Sales Manager
jstubbs@megacorpinc.com
505-259-5975
Paul Dornberger
Independent Sales RepresentativeEurope/Africa/Middle East
pdornberger@megacorpinc.com
+41 22 751 0020
Claudio Córdova M.
Independent Sales Representative
Latin America
ccordova@megacorpinc.cl
011-56996476128
Jennifer Gockley
Sales Administrator
jgockley@megacorpinc.com
505-341-6998
Norm Redenshek
Product Support Manager
Regional Sales Manager
nredenshek@megacorpinc.com
505-341-6987
David Holly
Product Support Technician
dholly@megacorpinc.com
505-341-6990
Bill Taylor
Product Support Sales Representative
btaylor@megacorpinc.com
505-341-6988
Jose Barraza
Parts Sales
jbarraza@megacorpinc.com
505-341-6969
Miguel Galaviz
Parts Sales
mgalaviz@megacorpinc.com
505-341-6986
MES34 And MTT20 at CAT® Tinaja During MINEXPO-2012
MTT20
Before and after MinExpo, Mega will also be participating in product demonstrations at
Caterpillar's Tinaja Hills Demonstration & Learning Center in Green Valley, Arizona. Mega is
proud to have its water products in all of the Caterpillar® demonstration centers around the
world including Tinaja. Customers will be able to see a Mega MTT20 tank in operation
on a Caterpillar 777 truck at CAT® Tinaja. Mega will have a sales representative
on-site to answer any questions. The dates of the show in Tinaja are September
19th-21st and September 27th-28th. Contact your local CAT® dealer for more
information about attending this event.
MES34
NEW!
MEGA LAUNCHES NEW SPRAY CONTROL SYSTEM
Most Mega water products are now available with the new Mega
Digital Spray Control System. This system will be standard on larger
products and an option on smaller, more price sensitive, machines.
The base machine replaces the original Mega cab control with a
new operator interface and digital control system. This system
serves as the foundation for productivity improvements and
offers the following benefits:
• IMPROVED OPERATOR INTERFACE – Simplified, smaller form factor for easier mounting inside operator's cab.
• INTEGRATED DESIGN – Designed from the start to work with Mega's time-tested spray system components,
not an aftermarket add-on.
• PUMP PROTECTION – Automatically shuts off water pump when tank is empty to prevent pump seal & bearing damage.
• GENUINE MEGA PRODUCT SUPPORT – All components are fully supported by Mega's product support team and
backed by Mega's comprehensive warranty.
• SOFT START-STOP – Prevents abrupt start-up and shut-down of water pump to prolong component life.
• BETTER ELECTRICAL DESIGN – Relocates power wiring outside of operator's cab leaving only the low-current
digital interface in cab, increasing protection from environmental threats.
• ENHANCED TROUBLESHOOTING – Allows technician to quickly isolate and identify problems.
Mega Digital Spray Control System With Ground Speed Option
Along with the base Digital Spray Control System, Mega is offering
an optional accessory that allows the operator to automatically
control the amount of water applied to road surfaces based
GPS SPEED SENSING
The system uses GPS data to determine speed.
The GPS system is universal – there is no special
application-specific engineering required and
the system is not vulnerable to contamination
like radar-based systems.
on ground speed. This system works with the existing Mega
spray system hardware – water pumps, hydraulic motors, spray
heads and electro-hydraulic controls. The system is available
for use with most Mega water products and offers the following
additional benefits over the base system:
FAIL-SAFE
In the event the system loses its GPS speed signal
or otherwise malfunctions, the system reverts to
manual mode and allows the machine to continue
operating with full capability in the original,
manual mode until repairs can be made – no need
to immediately down the machine.
SELF-CONTAINED
The system does not require connections to
other vehicle systems to determine speed.
Because it is self-contained, it is easy to adapt
to a wide variety of machine applications.
VERSATILITY
The system is adaptable to most Mega water
equipment and can be easily added in the field
to machines originally equipped with the base
system described above. The control system
can be retrofitted to many older models of water
distribution equipment equipped with Mega spray
systems without replacing any hardware. And, the
entire system can be used with competitive water
tanks as well.
AUTOMATIC WATER CONSUMPTION REDUCTION
The spray control system utilizes a PWM (pulse
width modulation) strategy to automatically limit
the amount of water consumed based on vehicle
speed while maintaining road dust control
coverage. Utilizing the PWM strategy avoids
the addition of complex and costly variable flow
hydraulic systems and the resulting impact on
machine reliability.
AUTOMATIC SHUT-OFF
The system automatically shuts off the flow of
water as the vehicle comes to a stop to prevent
puddling. Spraying automatically resumes as
the machine begins to move again.
Patent pending.
CORP.®
RELIABILITY
The system utilizes the same Mega water pump,
hydraulic motors, spray heads and electro-hydraulic
controls. There are no complex modifications to
the vehicle's hydraulic systems or powertrain – in
fact these interfaces do not change at all. The
same durable Mega spray system components
are maintained with all of the same parts supply,
technical support and documentation.
Corrosion Resistant Spray System
Mega has recently introduced a new corrosion-resistant
version of its hydraulic spray head. The new spray head
features a stainless steel body and nickel-plated top cap
and is available for use with all Mega water products with
hydraulic controls. With the addition of this component,
Mega now offers a complete package of corrosion
resistant spray system components and tank features –
epoxy interior tank coating, polyurethane exterior coating
and stainless steel control cabinetry, piping, water pump,
cannon and spray heads.
ONLINE PARTS ORDERING IS NOW AVAILABLE!
CHECK US OUT ON THE WEB @
WWW.MEGACORPINC.COM
In response to customer requests, Mega has added online
ordering capability to our website. Customers can browse
through approximately 700 of our most commonly-ordered
parts and place orders using both PO's and credit cards.
Customers will need to register on-line to access this service.
Pricing on the web, including any applicable discounts and
shipping, will be the same as if the order were placed via
telephone. Along with parts ordering, Mega has refreshed
the look and functionality of the website to improve its use.
Check us out at: www.megacorpinc.com.
Order Parts!
700 Osuna Rd. N.E.
Illustrated Parts
Breakdowns!
Set up your account
TODAY!
• Albuquerque, NM 87113 • 1-800-345-8889 • 505-345-2661 • Fax 505-345-6190
© 2012 Mega Corp. All rights reserved.