PRODUCT CATALOG - Guardian Fueling

PRODUCT CATALOG
1-800-733-9643
pumpsecurity@guardianfueltech.com
Deterring Fuel Theft With Innovative Solutions
Products Shipped Nationwide
GAS PUMP SECURITY SPECIALIST
1
Table of Contents
Page
ENCORE 300/500 T-HANDLE
4
ENCORE 300/500
5-7
GILBARCO ADVANTAGE
8-9
LOWER DOOR LOCKS ALL PUMPS
10-11
LOWER DOOR LOCKING RODS
12
WAYNE UPPER REPLACEMENT
13
LOCK
14
VANDALIZED FUEL DISPENSERS
CRC CARD READER SKIMMER
17
PROTECTION DEVICES
TANK COMMANDER- ANTI SIPHON
PROTECTION
Disclaimer:
Guardian Fueling Technologies, Inc. and it’s security
products and solutions are not affiliated with, or
sponsored or endorsed by,Gilbarco or Wayne.
2
These registered trademarks are owned by Gilbarco
and Wayne.
20
We are the complete gas pump security specialist. We design and manufacture
state of the art electronic security systems specifically designed for retail gas
dispensers as well as discreet, high-tech locking hardware. We will secure your
gas pumps, save you the cost of repairs and fuel loss and give you peace of
mind. We are committed to protecting fuel dispensers to prevent theft and
maintain proper reconciliation, yet allow you to maintain your oil company’s
image.
All of our steel rods are manufactured with quenched and tempered steel
Quenching
Material is heated up to the suitable temperature and then quenched in water
or oil to harden to full strength according to the type of steel.
Material is heated to the suitable temperature for hardening, then cooled
rapidly by immersing the hot part in water, oil or another suitable liquid to
transform the material to a fully hardened structure. Parts which are quenched
usually must be aged, tempered or stress relieved to achieve the proper
toughness, final hardness and dimensional stability.
Alloys may be air cooled or cooled by quenching in oil, water, or another liquid,
depending upon the amount of alloying elements in the material and final
mechanical properties to be achieved. Hardened materials are tempered to
improve their dimensional stability and toughness.
Tempering
Tempering is done to develop the required combination of hardness, strength
and toughness or to relieve the brittleness of fully hardened steels. Steels are
never used in the quenched condition. The combination of quenching and
tempering is important to make tough parts.
This treatment follows a quenching or air cooling operation. Tempering is
generally considered effective in relieving stresses induced by quenching in
addition to lowering hardness to within a specified range, or meeting certain
mechanical property requirements.
Tempering is the process of reheating the steel at a relatively low temperature
leading to precipitation and spheroidization of the carbides present in the
microstructure. The tempering temperature and times are generally controlled
to produce the final properties required of the steel. The result is a component
with the appropriate combination of hardness, strength and toughness for the
intended application. Tempering is also effective in relieving the stresses
induced by quenching.
3
Encore 300/500
GILBARCO ENCORE 300/500 THANDLE, 500S KITS AVAILABLE
One kit does both sides of the pump.
Cylinder and keys sold separately.
#GFTE3STHC
List price…….…… $239.50
4
T-HANDLE STANDARD LOCK
CYLINDER WITHOUT KEY, 2 LOCK
SET #GFTE3STHSLC
List price…………………. $32.88
T-HANDLE MULTI CODE LOCK CYLINDER
WITHOUT KEY, 2 LOCK SET. Can be re-
keyed on the fly for up to 8 different
keys using the control key
#GFTE3STHCKC
List price…………………… $57.25
BARREL LOCK CYLINDER KA TO
REPLACE GILBARCO CH 751 AND
WAYNE 1290 #GFT751RPL
List price………..…………… $17.50
T-HANDLE BARREL KEY MULTIPLE
CODES SOLD SEPARATELY
#GFTE3STCK
List price……………………… $7.25
T-HANDLE STANDARD LOCK
KEY #GFTE3STHSK
List price……………………… $5.38
5
GILBARCO ENCORE 300/500
6
ENCORE 300/500 PULSER SHAFT
AND AIR GAP PROTECTION KITS
#GFT300S PSAGP12
List price……………………… $225.50
ENCORE 300/500 PULSER
COVER #ENC900
List price……………………… $68.50
ENCORE 300/500 2 DOOR SET
CRIND DOOR HINGE REPAIR KIT
#GFTE3SHRKT
List price……………………… $162.00
GALVANIZED BRACKET CLAMPS
WITH CHAIN #GFTE3SUDB
List price……………………… $32.25
7
GILBARCO ADVANTAGE
8
GILBARCO ADVANTAGE UPPER
DOOR LOCKING RODS WITH
LOCKS #GFTADVUL
List price……………………… $204.00
GILBARCO ADVANTAGE AIR GAP
PULSER SHAFT PROTECTOR
#GFTADVAGP
List price………………………… $57.25
GILBARCO ADVANTAGE LOWER
PULSER SHAFT PROTECTORS
#GFTADVPSG
List price………………………… $81.25
GILBARCO ADVANTAGE
AIRGAP PROTECTOR BELT
#GFTADV1002
List price……………………… $444.50
GILBARCO ADVANTAGE T-HANDLE
One kit does both sides of the pump.
Cylinder and keys sold separately.
#GFTADVTHC9
9
List price………………………… $237.00
GILBARCO ADVANTAGE T-HANDLE One kit does both sides of the pump.
Cylinder and keys sold separately. #GFTADVTHC9
List price………………………… $237.00
GILBARCO ADVANTAGE PULSAR SHIELD KIT One kit does both sides of
the pump. Simple Installation. #GILADVPUL
List price…………………………
10
$72.00
LOWER DOOR LOCKING RODS
Fits all make and model pumps- Gilbarco, Tokheim,
Schlumberger, Dresser Wayne, Gasboy, and Bennett
MUST SPECIFY PUMP MAKE AND MODEL
11
LOWER DOOR LOCKING RODS.
With locks and keys. Kits do both
lower doors. Please specify type
of pump when ordering
Must Specify Make and Model
GFTLRL
List price…………………… $220.75
HOCKEY PUCK LOCK FLAT
BACK #GFTHPLK
List price……………………… $45.06
12
VANDALIZED FUEL DISPENSERS
13
14
15
16
CRC- Card Reader Cage SKIMMER PREVENTION is a proven tool for
deterring thieves from installing skimming devices on your dispenser
card readers. This is a heavy gauge professionally machined ruggedized
2 piece box that covers dispenser card readers completely. The design
also covers all screws that hold the card reader in place so that nobody
can remove your card reader, OR THE CRC BOX. Each box can be keyed
specifically for your preferences with hardened barrel lock. Designed to
fit both Wayne and Gilbarco dispensers. Volume price breaks are
available.
See pictures below and email us or call us for pricing.
pumpsecurity@guardianfueltech.com
Prototype CRC installed on a test unit
17
CRC Unit fully encloses dispenser card reader to prevent skimming devices
18
All CRC units can be keyed to customer specifications
PICTURED ABOVE IS AN ACTUAL SKIMMING DEVICE FOUND IN DISPENSER
19
Stop Siphoning From Underground Tanks Today!!!ade easy!
Easy Installation and Easy For Delivery Drivers to Work With.
Contact us today for pricing and availability
www.guardianfueltech.com
Click on Pump Security Link
Or Email our Security Specialists
pumpsecurity@guardianfueltech.com
20