Brochure Waterking 2015 - Waterking Amphibious Excavator

Amphibious Equipment
Amphibious Excavator
Additional Pontoons
Accessories
Amphibious Transporter
Waterking Amphibious Equipment
Waterking is market leader in Western Europe in the production of
amphibious equipment. Waterking has more than 20 years of
experience in the design and construction of amphibious
machinery.
Especially its practical experience in working with this machinery
makes Waterking one of the most experienced manufacturers
of amphibious excavators in the world.
All of our machinery is developed, tested and adapted to the
most severe and difficult conditions for working in wetlands,
deltas and poor load-bearing terrains. Our subsidiary Knoop
Baggerwerken continuously monitors the machines for
performance, efficiency and reliability. As a result Waterking,
continues to innovate and optimise.
All products of Waterking are manufactured in conformity with the
provisions of the Machinery directive (2006/42/EC).
Waterking’s core qualities: "Only the best is good enough"
-
Continuous development and optimisation of machinery
Unique designs, maximum performance and optimally
tested
The use of high-quality steel types
Efficient in use and easy to transport
Globally operating after-sales network; 24/7 service
Waterking’s products
Waterking has a wide range amphibious equipment.
-
Amphibious Excavators
-
Additional pontoons for all models
Accessories (for example: various types of buckets, tree
-
•
•
•
•
•
•
•
6 ton class
7-9 ton class
9-1 0 ton class
1 3-1 6 ton class
20-23 ton class
24-27 ton class
30-36 ton class
cutters, dredging pumps, etc)
Amphibious platform (different models)
• Transporter
• Amphibious dump carrier
• Amphibious transporter for passenger transportation
Amphibious excavators - New Generation
The Waterking NG (New Generation) amphibious excavator
has been developed for operating under poor load-bearing
conditions and was engineered and built in-house. The excavator
is designed for operating on land as well as in water, which
makes it highly efficient. The machine crosses swamps, ditches,
lakes and waterways with ease. It is impossible for the excavator
to sink. The machine does not cause any damage to fragile nature or
soil structure because of its very low ground pressure. The
amphibious excavators have a 360° operating radius (also with the
additional pontoons mounted on).
The machines are delivered throughout the world. The materials
are of high quality as result of which the excavators are safe,
durable and highly reliable. Waterking New Generation pontoons
are made from Cor-Ten steel which is till 8 times more corrosion
resistance than normal steel. All wear parts are made of Hardox.
Pontoons
The basic excavators weigh from 8 to 36 tonnes and have a boom
length of 6.5 to 20 meters. The undercarriage is manufactured in the
Netherlands. The pontoons are equipped with broad tracks to
maximise the grip on the ground. The undercarriage consists of 2
pontoons connected together by a frame. Any type of upper structure
(new or used) can be connected on the pontoons, for instance:
Caterpillar, Hitachi, Doosan, Komatsu, Volvo, JCB, Takeuchi, Yanmar,
etcetera. It is also possible to purchase only the undercarriage
(pontoons).
Models
The models are available in the basic machine weight category
8 to 36 tons.
•
•
•
•
•
•
WK 90 NG - AS and WK 90 NG - AW
WK 1 00 NG - AS
WK 1 50 NG and WK 1 50 NG - A
WK 220 NG - 3
WK 250 NG - 3
WK 350 NG - 3
Operating depth
The amphibious excavator can perform practically any water works
up to a depth of 1 .1 - 1 .5 meters: dredging, positioning of sheet piling,
salvage operations, clearing trees, earth- and delta works. With
additional pontoons till 3-5 m.
Transport
Adjustable
The excavators with an adjustable undercarriage can be transported in one piece. Because of the
adjustable undercarriage, the undercarriage can be hydraulically adjusted without dismantling.
During transport the WK 90 NG - AS and WK 1 00 NG - AS have a width of 3.00 metres. The WK 90
NG - AW and WK 1 50 NG - A have a width of 3.50 meters. Therefore these excavators are easy to
transport.
Fixed
The fixed version is also easy to transport. It takes less than an hour to build and dismantle it. The
entire machine can be transported on two flatbed trailers. The transport width and height fall within
2.80 and 3.30 metres.
The transport measurements of the fixed and the adjustable versions fall within the normal transport
dimensions. There is no special permit required.
Technical specification - New Generation
WK 90 NG-AS
Excavator class
Total weight
Reach standard
Bucket
Weight pontoon set
Pontoon length
Pontoon width
Pontoon height
Tracks
Track width
Chain
7 - 9 ton
1 6 ton
6,5 - 1 0,0 meter
200 - 400 litre
1 0,0 ton
8,60 meter
1 ,35 meter
1 ,30 meter
Polytrack
1 ,35 meter
2 chains 6"
Undercarriage width Adjustable
2990 - 4200 mm
WK 90 NG-AW WK 1 00 NG-AS
7 - 9 ton
1 5 ton
6,5 - 1 0,0 meter
200 - 400 litre
1 0,0 ton
7,60 meter
1 ,40 meter
1 ,45 meter
Polytrack
1 ,40 meter
2 chains 6"
Adjustable
3490 - 4480 mm
9 - 1 0 ton
1 6 ton
6,5 - 1 0,0 meter
200 - 400 litre
1 0,0 ton
8,60 meter
1 ,35 meter
1 ,30 meter
Polytrack
1 ,35 meter
2 chains 6"
Adjustable
2990 - 4200 mm
WK 1 50 NG
WK 1 50 NG-A
WK 220 NG-3
WK 250 NG-3
WK 350 NG-3
1 3 - 1 6 ton
22 ton
9,0 - 1 3,0 meter
300 - 700 litre
1 2,5 ton
8,00 meter
1 ,60 meter
1 ,65 meter
Polytrack
1 ,60 meter
2 chains 6"
1 3 - 1 6 ton
26 ton
9,0 - 1 3,0 meter
300 - 700 litre
1 4,0 ton
1 0,00 meter
1 ,50 meter
1 ,55 meter
Polytrack
1 ,50 meter
2 chains 6"
Adjustable
3500 - 4740 mm
20 - 23 ton
38 ton
1 0,0 - 1 5,5 meter
500 - 1 200 litre
20,0 ton
1 0,00 meter
2,00 meter
1 ,50 meter
Polytrack
2,00 meter
3 chains 6"
24 - 27 ton
42 ton
1 0,5 - 1 8,5 meter
650 - 1 500 litre
22,0 ton
11 ,00 meter
2,00 meter
1 ,50 meter
Polytrack
2,00 meter
3 chains 6"
30 - 36 ton
46 ton
11 ,5 - 20,0 meter
650 - 1 500 litre
24,0 ton
11 ,00 meter
2,00 meter
1 ,80 meter
Polytrack
2,00 meter
3 chains 6"
6,00 m
6,00 m
6,00 - 6,50 m
4,70 m
Additional pontoons
The Waterking can be equipped with additional pontoons fitted with hydraulic spud poles, which
makes it possible to work in water depths up to about 5 metres. Without additional pontoons it is
possible to work to a maximum water depth of 1 .1 - 1 .5 metres (depends on model).
Waterking: The green perfection!
• Phenomenal pulling force
• Perfect weight division, same digging
range at front and back
• Very broad tracks for extremely low
ground pressure
• Machine entirely engineered and built
in-house
• Worldwide service and all parts
available from stock
•
Accessories
Options
•
•
•
•
•
•
•
Demolition and sorting grab (rotating)
Tree cutter
Quick hitch
Additional pontoons
Hydraulic powerpack
Dredging pump
Various buckets (full perforated dredging bucket,
bucket with drain holes, rake, etc)
• Vibration block
• Platform with fuel tank
• Various types of booms (6-1 8.5 m, when
excavator is provided with standard boom)
•
•
•
•
•
•
•
•
Can be tailored to customer
requirements
Normal transport measurements,
according to Dutch regulations (no permit
required)
CE Certified
Cor-Ten steel/ Hardox wear parts
Extra work lighting
Central lubrication
Several hydraulic functions
GPS/GPRS
Upper structure (new or used):
Doosan, Caterpillar, Takeuchi, Hitachi,
Yanmar, Volvo, JCB, Komatsu, Kato,
Hyundai, Liebherr, Kobelco
Transporters
The Waterking amphibious transporter is a multifunctional machine, which is designed and built
for transportion of equipment and materials in poor load bearing terrains, like wetlands. The
machine is suitable for operations on dry land and wetlands. The machine consists of an
undercarriage (pontoons) and a upper structure (cab, engine and platform).
Undercarriage
The machine is designed and built in-house. The pontoons, which are also used for the
amphibious excavators, form the basis of the transporter. The machine is equipped with a
tremendous pulling force, which makes it able to ride on a slope under its own power. In addition,
the pontoons have sufficient buoyancy and the ground pressure per cm² is very low.
Transport
The upper structure (cabin and engine) can be transported separately from the undercarriage
(pontoons). The side plateau can be hydraulically folded so that the machine fits within the
maximum transport width. While operating, the side plateaus are folded down to increase the
deck surface for work purposes.
The assembly of the machine is very easy. When the pontoons are placed, the upper structure
can be simply mounted. The assembly of the machine can be done within one hour.
Models
•
•
•
Transporter
Amphibious dump carrier
Amphibious transporter for passenger transportation
Design
Waterking attach a great deal of importance to the quality of our products and services. The
machines are developed and built entirely under our own management. Which has the
advantage that each machine can be tailored to customer requirements. Each customer is
individually informed and briefed so that the right machinery is used for the right activities.
With every customer request Waterking makes an assessment whether the amphibious
excavator needs to be adjusted to customer requirements. For specific requirements a new
design (3D drawing) or construction calculation will be made before the machine is put into
production. The amphibious equipment is custom made and therefore every machine of
Waterking is unique.
Examples of certain adjustments to customer specifications are:
•
Extending booms to improve the working range (from standard to semi-long reach or
super long reach)
•
Moving the counterweight for better weight/balance distribution of the machine (optional
platform including fuel tank)
•
Adding hydraulic functions
Production
Waterking produces at three different locations in the Netherlands. The undercarriages
(pontoons) for the amphibious excavators and transporters are built on location in Zuidbroek.
The booms are modified/extended in Boxmeer. And in our workshop in Tynaarlo the machines
are assembled, tested and prepared for transport. At request of the customer we can provide
instruction on location. Handling an amphibious excavator requires specific field knowledge.
Waterking provides instruction to your operators about:
•
Assembly and disassembly
•
Specific work instructions
•
Maintenance
Maintenance
The lifespan of the equipment will be prolonged by timely
and correct maintenance. In addition to development and
production, we also offer a global service by Waterking
Netherlands (Western Europe) or through one of our
dealers abroad. For more information about maintaining
your amphibious excavator, please contact your dealer.
Service
Waterking has a wide after sales network. The parts for
undercarriages (pontoons) are available from stock.
Spare parts for all types of upper structure are available
with short delivery times.
•
•
Waterking BV
24/7 service
All spare parts are available from stock
Mercuriusweg 22, 9482 WL TYNAARLO, The Netherlands
Postal address: PO box 1 , 9480 AA VRIES, The Netherlands
www.waterking.nl
Tel. +31 (0) 592 - 55 95 36
Fax. +31 (0) 592 - 55 95 30
sales@waterking.nl
Waterking B.V., All rights reserved. The machine design and specifications are subject to change without any notice.