- Beretta Defense Technologies
Transcription
- Beretta Defense Technologies
2015 BETTER ACCURACY F O R A L L . N O M AT T E R T H E S I T U AT I O N . IN COMBAT, LAW ENFORCEMENT AND SELF-DEFENSE SITUATIONS, ACCURATE MARKSMANSHIP IS CRITICAL TO GETTING THE JOB DONE. STEINER EOPTICS PRODUCTS UTILIZE INNOVATIVE STATE-OF-THE-ART TECHNOLOGIES THAT MAKE YOU MORE EFFECTIVE IN THE FIELD AND PROVIDE A HIGHER LEVEL OF PERFORMANCE EVEN IN THE HARSHEST OF ENVIRONMENTS. SO YOU CAN LET YOUR INSTINCTS TAKE OVER AND STILL BE CONFIDENT, ACCURATE AND HIGHLY EFFECTIVE. STEINER 2015 STEINER-DEFENSE.COM 2 DBAL SERIES • CQBL SERIES BATTLE LIGHTS • ILLUMINATORS EOPTICS SPECIFICATIONS • CUSTOMER SERVICE EOPTICS SERIES 3 STATE - OF- T HE- A R T ENGINEER I NG DEPA R T M E N T STEINER EOPTICS DEPARTMENT WITH MAINTAINS A A FULL STATE-OF-THE-ART COMPLEMENT OF PRODUCTION PROCESS ENGINEERING EXPERIENCED MECHANICAL, ELECTRICAL AND OPTICAL ENGINEERS. THESE SKILLED PROFESSIONALS ARE SUPPORTED BY HIGHLY SKILLED ELECTRICAL AND MECHANICAL TECHNICIANS. KEY TEST AND A S S E M B LY C A PA B I L I T I E S •A CLASS 100 CLEAN ROOM FOR THE ASSEMBLY OF SENSITIVE EOPTICS PRODUCTS •S ENSITIVE OPTICAL POWER METERS AND BEAM CHARACTERIZATION CAMERAS WITH THE NECESSARY FILTERS AND APERTURES FOR MEASURING ALL LASER OUTPUTS FROM 500 NM TO 1.5 MICRONS AT OUTPUT POWERS FROM .01 MW TO 500 MJ THE PRODUCTION PROCESS ENSURES THAT ANY DEFECTS IN THE ASSEMBLY PROCESS ARE CAUGHT AS EARLY AS POSSIBLE. THE MAJORITY OF THE ASSEMBLY STAGES ALSO HAVE A MATCHING TEST STAGE USED TO CONFIRM THAT THE PRIOR PRODUCTION STEP WAS PROPERLY PERFORMED. MECHANICAL SHOCK, TO SIMULATE MECHANICAL VIBRATION, TO SIMULATE TRANSPORT HIGH AND LOW TEMPERATURE OPERATION AND STORAGE TESTING, THE WEAPONS ON WHICH THE ON MILITARY AND COMMERCIAL VEHICLES INCLUDING WHERE THE DEVICES ARE EXPOSED TO THE MAXIMUM EXPECTED DEVICES WILL BE MOUNTED ROTARY-WING AND FIXED-WING AIRCRAFT OPERATING TEMPERATURES AND STORAGE TEMPERATURES TEMPERATURE SHOCK, WHERE THE EQUIPMENT IS HEATED IMMERSION TESTING, BOTH ADDITIONAL ENVIRONMENTAL TESTING MAY INCLUDE TO A HIGH TEMPERATURE AND TRANSITIONED INTO A VERY SIMULATED AND TO ACTUAL EXPOSURE TO SALT FOG, SAND OR DUST AND COLD TEMPERATURE WITHIN A FEW SECONDS DEPTHS AS FAR AS 66 METERS ELECTRO-MAGNETIC SHOCK TESTING •L ASER SAFETY ROOM WITH CONTROLLED ACCESS AND SAFETY SHIELDING TO ACCOMMODATE HIGH-ENERGY LASERS TO 500 MJ • A FULL ARRAY OF ENVIRONMENTAL TEST EQUIPMENT QUALITY ASSURANCE STEINER EOPTICS MAINTAINS AN ISO 9001:2008 QUALITY MANAGEMENT SYSTEM AND HAS CONTINUOUSLY MAINTAINED AN ISO 9001 QMS CERTIFICATION SINCE 2001. QUALITY PLAYS A VERY IMPORTANT ROLE AT RAPID P R OT OT YP I NG STEINER AND STARTS WITH THE DESIGN AND DEVELOPMENT PROCESS. ONCE THE INITIAL DESIGN PROCESS IS FINISHED, RAPID DURING THE INITIAL DESIGN REVIEW, OUR ENGINEERS EVALUATE THEIR 3-D PRINTING STATIONS ARE USED TO PROTOTYPE AND DESIGN CONCEPT TO MAKE SURE THAT IT WILL MEET THE NECESSARY PERFECT THE DESIGN. WE HAVE ACCESS TO SUPPLIERS AND QUALITY REQUIREMENTS. RESOURCES TO QUICKLY TAKE A DESIGN PROJECT FROM BARE CONCEPT TO A WORKING, TESTABLE PROTOTYPE. A PROVEN TRACK RECORD ASSEMBLY STEINER EOPTICS (FORMERLY LASER DEVICES, INC.) HAS A PROVEN TRACK RECORD AS A GOVERNMENT CONTRACTOR SUPPLYING MILITARY LASERS AND DESIGN TEAM IS ABLE TO ASSEMBLE AND TEST LASER LIGHTS TO THE U.S. DEPARTMENT OF DEFENSE AS WELL AS TO NATO CUSTOMERS. IN ADDITION TO SUPPLYING PRODUCTS TO OUR MILITARY CUSTOMERS, AND STEINER HAS ALSO BEEN SELECTED TO PROVIDE DESIGN AND DEVELOPMENT SERVICES BY THE U.S. GOVERNMENT AND OTHER PRIME CONTRACTORS. PARTS AND ILLUMINATION ASSEMBLIES SYSTEMS IN ARE A RECEIVED, STATE-OF-THE-ART EOPTICS LAB. TECHNOLOGY & INNOVATIONS STEINER 2015 STEINER-DEFENSE.COM 4 THE ONCE 5 THE DBAL-PL ENABLES OPERATORS TO ENGAGE TARGETS ON A BATTLEFIELD OR DURING CLOSE-QUARTER COMBAT IN BOTH DAYLIGHT AND NO-LIGHT CONDITIONS. THIS PISTOL LIGHT FUNCTIONS IN TWO OPERATIONAL MODES: THE VISIBLE SWITCH ACTIVATES THE VISIBLE LASER AND 400-LUMEN WHITE LIGHT LED, WHICH AIDS IN IDENTIFYING THE TARGET; THE IR SWITCH PAIRS A CLASS 1 IR LASER WITH AN EYE-SAFE IR LED ILLUMINATOR FOR SUPPLEMENTAL ILLUMINATION, WHICH HELPS TO ACCURATELY ENGAGE THE TARGET, EVEN FROM AWKWARD ANGLES AND IN LOW-LIGHT CONDITIONS. THE NEW GREEN LASER TECHNOLOGY OFFERS BETTER VISIBILITY AND GREATER STABILITY OVER A WIDE RANGE OF TEMPERATURES. NEW DBAL-PL OVERALL FEATURES • Co-aligned visible and IR aiming lasers • Fully adjustable windage and elevation • Integrated adjustable Picatinny mount • Green visible aiming laser • IR laser and IR illuminator • White Light LED • Powered by 2 CR123A batteries • Quick-release battery latch DBAL-PL DUAL BEAM AIMING LASER - PISTOL LIGHT Item No. Weight Visible Laser IR Pointer IR LED Illuminator White Light 75005 (Black) 5.4 oz. <5 mW green laser Class IIIa <0.7 mW <600 mW 400 lumens C R E AT E T H E A D VA N TA G E . CONTROL THE OUTCOME. FULLY ADJUSTABLE MOUNTING BRACKET EASILY 400-LUMEN WHITE LIGHT AND IR ILLUMINATION WHITE LIGHT OR IR LASER AND IR ILLUMINATOR. ATTACHES THE DBAL-PL TO STANDARD PISTOL SIT BELOW THE VISIBLE GREEN LASER AND IR EACH MODE CAN BE SELECTED WITH PUSH-BUTTON RAILS OR M1913 PICATINNY RAILS. LASER POINTER. RECOIL-RESISTANT LEDS ENSURE SWITCHES AT THE REAR OF THE UNIT. STEINER 2015 STEINER-DEFENSE.COM 6 TWO OPERATIONAL MODES: VISIBLE LASER AND IN A STRESSFUL, LIFE-THREATENING SITUATION, HAVING THE RIGHT EQUIPMENT CAN MEAN THE DIFFERENCE BETWEEN SUCCESS AND FAILURE. THE DBAL-PL PROVIDES WHAT YOU NEED TO GET THE JOB DONE. RELIABLE PERFORMANCE SHOT AFTER SHOT. DBAL SERIES 7 DBAL-D2 DBAL-A2 DUAL BEAM AIMING LASER WITH IR LED ILLUMINATOR DUAL BEAM AIMING LASER - ADVANCED2 (AN/PEQ-15A) High-definition aspherical, telescopic IR LED illuminator significantly enhances night-vision performance. Features a 2° to 30° adjustable illumination beam and offers an eye-safe means of illuminating distances greater than 1,000 meters. NEW Incorporates an improved IR illuminator to provide better illumination at longer distances, and the cleaner, circular beam allows for accurate range estimation and engagement of moving targets. Item No. Weight Visible Laser IR Pointer IR Illum. Item No. Weight Visible Laser IR Pointer IR Illum. 40301 (Black), 40301D (Desert Sand) 12.5 oz. <5 mW green laser Class IIIa <0.7 mW <600 mW 40090 (Black) - Restricted 8 oz. <5 mW red laser Class IIIa <50 mW <50 mW • CO-ALIGNED VISIBLE & IR AIMING LASERS • CLASS 1 IR LASER WITH IR ILLUMINATOR COMBINED • ILLUMINATOR CAN BE MOUNTED ON RIGHT, LEFT OR TOP OF WEAPON • VISIBLE RED OR GREEN LASER • INFRARED LASER & INFRARED ILLUMINATOR COMBINED • MEETS MIL-STD-810G ENVIRONMENTAL TESTING DBAL OVERALL FEATURES • Fully adjustable windage and elevation • Available high and low power modes • Activation/low battery indicator light • A ttaches to any Picatinny rail using the patented, self-adjusting Quick Release HT Mount • Includes remote cable port DBAL-I2 DBAL-A3 DUAL BEAM AIMING LASER - INTELLIGENT2 DUAL BEAM AIMING LASER - ADVANCED3 The most lightweight model in the DBAL Series, this “intelligent” laser provides extreme accuracy in lowlight conditions and can be used with night-vision devices. Features an adjustable IR illuminator for better illumination at longer ranges, dual activation switches, and high/low power modes. Provides a “visible override” port to integrate a white light LED with the visible laser. Item No. Weight Visible Laser IR Pointer IR Illum. Item No. Weight Visible Laser IR Pointer IR Illum. 40072 (Black) - Restricted, 40072A (Black) - Restricted, 40072D (Desert Sand) - Restricted, 40072DA (Desert Sand) - Restricted 8 oz. - <50 mW <50 mW 40095 (Black) - Restricted, 40095D (Desert Sand) - Restricted 8 oz. <5 mW red laser Class IIIa <50 mW <50 mW 8 oz. <65 mW red laser Class IIIb <50 mW <200 mW 50406 (Black) - Restricted 8 oz. <50 mW green laser Class IIIb <50 mW - 50302 (Black) - Restricted, 50302D (Desert Sand) - Restricted <5 mW green laser Class IIIa <50 mW <50 mW 8 oz. <50 mW green laser Class IIIb - <50 mW 50303 (Black) - Restricted, 50303D (Desert Sand) - Restricted 8 oz. 50406D (Black) - Restricted 50433 (Black), 50433D (Desert Sand) 8 oz. <5 mW red laser Class IIIa <0.7 mW - 50307 (Black) - Restricted 8 oz. <50 mW green laser Class IIIa <50 mW <50 mW 50436 (Black), 50436D (Desert Sand) 8 oz. <5 mW green laser Class IIIa <0.7 mW - 50307D (Desert Sand) - Restricted 8 oz. <50 mW green laser Class IIIb <50 mW <50 mW 50450 (Black) 8 oz. - <0.7 mW <4 mW 50308 (Black) - Restricted, 50308D (Desert Sand) - Restricted 8 oz. <50 mW green laser Class IIIb <50 mW <200 mW 50325 (Black), 50325D (Desert Sand) 8 oz. <5 mW green laser Class IIIa <0.7 mW <4 mW • VISIBLE GREEN LASER / IR LASER MODEL • PRE-DRILLED MOUNTING HOLES FOR OPTIONAL SUB-MINIATURE RED DOT SIGHT OR MIL-SPEC TOP RAIL • VISIBLE GREEN LASER • IR LASER & ILLUMINATOR COMBINED NO CHALLENGE TOO TOUGH. N O TA R G E T T O O D A R K . UNMATCHED VERSATILITY AND SUPERIOR OPERATIONAL LONGEVITY ARE PAIRED TOGETHER IN THE DBAL FAMILY OF LASERS TO PROVIDE MAXIMUM FUNCTIONALITY FOR MILITARY, LAW ENFORCEMENT AND SELF-DEFENSE USERS WORLDWIDE. STEINER 2015 STEINER-DEFENSE.COM 8 • Integrated push-button switch and remote cable pressure-pad switch activation – tap and release for momentary activation; tap twice for 5-minute continuous ON DBAL SERIES 9 CQBL-1 One of the smallest and most rugged dual-function lasers available, the CQBL-1 is compatible with virtually every submachine gun and short-barrel rifle there is, and packs the output power needed for use on carbine, rifle and light machine gun systems. CO-ALIGNED VISIBLE AND IR LASERS ELIMINATE THE NEED TO SIGHT IN EACH LASER INDIVIDUALLY. LOWPROFILE WINDAGE AND ELEVATION ADJUSTERS ENSURE A CONSTANT ZERO. Item No. Weight Visible Laser IR Pointer 60603 (Black), 60603D (Desert Sand) 8 oz. <0.5 mW red laser <0.7Mw • CO-ALIGNED VISIBLE RED LASER AND IR AIMING LASER • INTEGRATED PUSH-BUTTON SWITCH AND REMOTE CABLE PRESSURE-PAD SWITCH ACTIVATION – TAP AND RELEASE FOR MOMENTARY ACTIVATION; TAP TWICE FOR 5-MINUTE CONTINUOUS ON • DUAL FUNCTION/SINGLE POWER MODE • INTEGRATED PICATINNY MOUNT • REMOTE CABLE PORT STEINER EOPTICS CLOSE QUARTER BATTLE LASERS ARE DESIGNED TO PROVIDE RAPID, CLOSE-RANGE AIMING ACCURACY TO MILITARY, LAW ENFORCEMENT AND OTHER SPECIALIZED USERS WHO REQUIRE AIMING TOOLS SPECIFIC TO A CLOSE-QUARTER BATTLE. BECAUSE ENEMIES, HOSTAGES, CIVILIANS, TEAMMATES OR FAMILY MEMBERS CAN BE CLOSELY INTERMINGLED DURING THESE CLOSE ENCOUNTERS, THE ADDITION OF A CLOSE QUARTER BATTLE LASER ENABLES FASTER AND MORE PRECISE TARGET ACQUISITION. AR-2A This single-beam laser easily attaches to weapons without rails using a fixed-front iron sight clamp and provides greater accuracy in low-light conditions. THIS FIXED-FRONT-SIGHT CLAMP. THE CLAMP FEATURES DUAL SIDE RAILS THAT CAN BE USED TO MOUNT TACTICAL LIGHTS AND OTHER ACCESSORIES. Weight Visible Laser 24435 (Black) 5.6 oz. <5 mW red laser Class IIIa • FULLY ADJUSTABLE WINDAGE & ELEVATION • DUAL PICATINNY SIDE RAILS • VISIBLE LASER OR IR LASER • INTEGRATED REMOTE CABLE SWITCH MOST CLOSE-QUARTER BATTLE ENCOUNTERS ARE BETWEEN 3 TO 10 YARDS. THESE LIGHTWEIGHT VISIBLE AND IR LASER SIGHTS DELIVER SPEED, ACCURACY AND GREATER ODDS FOR SUCCESS. STEINER 2015 STEINER-DEFENSE.COM 10 EASILY ATTACHES TO WEAPONS WITHOUT RAILS USING Item No. GIVE YOURSELF AN U N FA I R A D VA N TA G E . CQBL SERIES 11 OTAL-A THE OTAL-C IS THE “CLASSIC” VERSION OF THIS OFFSET TACTICAL AIMING LASER. RUGGED AND COMPACT, THE OTAL-C LASER IS USED BY MILITARY AND LAW ENFORCEMENT AGENCIES WORLDWIDE AND HAS DEVELOPED A REPUTATION FOR RUGGEDNESS AND RELIABILITY. IT MOUNTS BEHIND THE FRONT SIGHT ON M-4 STYLE RIFLES AND THE LASER IS OFFSET TO PROJECT AROUND THE FRONT SIGHT. THE COMPACT DESIGN MINIMIZES WEIGHT AND THE LOW PROFILE MAKES IT EASY TO MOUNT IN FRONT OF SCOPES, HOLOGRAPHIC SIGHTS OR NIGHT-VISION DEVICES. THE OTAL-A SERIES IS THE “ADVANCED” GENERATION OF THE OTAL-C THAT HAS SERVED RELIABLY IN THE HARSHEST CONDITIONS. THE OTAL-A FEATURES AN OFFSET LASER MODULE THAT ALLOWS IT TO BE MOUNTED AT THE 12 O’CLOCK POSITION ON A M-4 WEAPON SYSTEM WITH A STANDARD FRONT SIGHT BASE. THE LASER IS OFFSET JUST ENOUGH TO CLEAR THE FRONT SIGHT BASE. WHEN TIGHTLY FOCUSED, THE LASER PROVIDES A CONTINUOUS BEAM ALONG THE WEAPON’S LINE OF FIRE FOR PRECISE AIMING. This “advanced” model forges ahead with innovative enhancements. It’s equipped with a visible green laser that will range out to 750 meters. Item No. Weight Visible Laser IR Pointer 19146 (Black) 6 oz. <50 mW green laser Class IIIa - 19241 (Black) 6 oz. <50 mW red laser Class IIIa - OTAL-C Designed for the M-4 platform, the visible red laser beam on this model projects around the front sight. It can be mounted in front of scopes, holographic sights and night-vision devices. Item No. Weight Visible Laser IR Pointer 19215 (Black) 4.9 oz. <5 mW red laser Class IIIa - 19217 (Black) 4.9 oz. - <0.7 mW OTAL SERIES OVERALL FEATURES • Momentary or constant ON •F ully adjustable windage operation (only on OTAL-A) and elevation • Remote cable port •Q uick-release HT Mount •P ush-button or remote cable pad activation THIS WITH A PUSH BUTTON OR REMOTE CABLE. ADJUSTABLE FOR WINDAGE AND ELEVATION, AND TAP AND RELEASE THE FIRE BUTTON FOR CAN BE CONFIGURED WITH A VISIBLE OR IR LASER. MOMENTARY ACTIVATION OR TAP TWICE FOR 5-MINUTE CONTINUOUS ON. HIGH/ LOW SETTINGS FOR DAYTIME OR LOW-LIGHT BATTLE-PROVEN LASER IS FULLY RAPID AND ACCURATE ARE NEVER A CONTRADICTION WITH THE OTAL LINE OF LASERS. THE LASERS ARE OFFSET AND CAN BE MOUNTED ON M-4 CARBINES FOR RAPID, CLOSE- OR LONG-RANGE AIMING ACCURACY. STEINER 2015 STEINER-DEFENSE.COM 12 THE OTAL-A AND OTAL-C CAN BE ACTIVATED THE BAD GUYS WILL BE GREEN WITH ENVY. CQBL SERIES 13 Mk3 Mk4 BATTLE LIGHT BATTLE LIGHT The impressive Mk3 features a 600 mW eye-safe IR LED and a 500-lumen white light LED with high/low and optional strobe modes, providing the versatility and operational range needed to face any situation, day or night. The modular, low-profile design of this 500-lumen weapon light provides interchangeable switch options and places the light close to the weapon body, nearly eliminating the rifle barrel shadow and enhancing weapon-handling switchology. It can operate on two CR123A batteries or one rechargeable lithium ion battery (sold separately). Item No. Weight Light Power Output (High/Low) White Light Item No. Weight White Light 60455 (Black) 8 oz. IR LED Illuminator <600 mW / <150 mW 500 lumens 60460 (Black), 60460D (Desert Sand) 4.9 oz. 500 lumens THESE WHITE LIGHT ILLUMINATION TOOLS ARE PERFECT ACCESSORIES FOR ANY MISSION WHERE EVERY OUNCE COUNTS. IT’S NOT JUST ABOUT THE LUMENS – IT’S ABOUT THE QUALITY OF LIGHT. BATTLE HARDENED AND MILITARY GRADE, THESE FLASHLIGHTS ARE RUGGED, LOW PROFILE AND PRODUCE A STUNNING BEAM OF BRILLIANT WHITE LIGHT WITHOUT ANY DIM OR SHADOWED AREAS. THESE BATTLE LIGHTS CAN BE HANDHELD OR WEAPON-MOUNTED AND ARE FULLY OPERATIONAL FROM 20,000 FEET ABOVE SEA LEVEL TO 66 FEET BELOW THE OCEAN’S SURFACE. BATTLE LIGHTS OVERALL FEATURES • Integrated push-button operation • Handheld or weapon-mounted capability • Temperature range: –10° C to +65° C • Heritage Warranty™ Mk5 Mk7 BATTLE LIGHT BATTLE LIGHT One of the brightest handheld flashlights available today, this powerful light has a 800-lumen white light LED and illuminates up to 400 meters. The compact, ergonomic design of this 350-lumen mini-light makes it the perfect tactical shotgun light. A shotgun end cap attaches directly onto the magazine tube and replaces the factory spring cap. HOW GOOD GUYS B E AT T H E D A R K S I D E . Item No. Weight White Light Item No. Weight White Light 76000 (Black) 6.1 oz. 800 lumens 9075 (Black) - Remington 870/1100/1187 4.1 oz. 350 lumens 9076 (Black) - Mossberg 500 4.1 oz. 350 lumens 9077 (Black) - Beretta 1301 4.1 oz. 350 lumens 9078 (Black) - Benelli M4 / Nova 4.1 oz. 350 lumens WHEN THE SITUATION CALLS FOR ILLUMINATION, THESE BATTLE LIGHTS WILL LIGHT YOUR WAY WITH A BEAM OF LIGHT THAT PROVIDES FOR MINIMAL DIM OR SHADOWED AREAS SO YOU CAN HAVE CONFIDENCE IN ACCURATELY IDENTIFYING YOUR TARGET. STEINER 2015 STEINER-DEFENSE.COM 14 • Recoil-resistant white light LED • Robust waterproof construction BATTLE LIGHTS 15 SPIR MP5/MP5K This Special Purpose IR LED illuminator is equipped with a high-definition, aspherical telescopic illuminator. It can be used in conjunction with nightvision equipped spotting scopes and deployed as a handheld or weapon-mounted IR illuminator. This illuminator features a 200-lumen, recoil resistant, high-output white light LED – no filament to burn out or break. It’s compatible with many suppressors and is available with a Momentary or Momentary with Positive ON or OFF activation switch. Item No. Weight Illuminator Item No. Weight White Light 60480 (Black) 6.5 oz. IR LED Illuminator <600 mW / <300 mW 39992LED (Black) - MP5 Foregrip 11.13 oz. 200 lumens 27313 (Black) - MP5K Grip 5.7 oz. 200 lumens • INTEGRATED ACTIVATION SWITCH • ACTIVATION/MODE SELECTOR SWITCH • INTEGRATED PUSH-BUTTON SWITCH & REMOTE CABLE PRESSURE PAD SWITCH ACTIVATION – TAP AND RELEASE FOR MOMENTARY ACTIVATION; TAP TWICE FOR 5-MINUTE CONTINUOUS ON • HIGH & LOW POWER MODES • HANDHELD OR WEAPON-MOUNTED MODELS • REPLACES FOREGRIP ON HECKLER & KOCH MP5 • MOMENTARY PRESSURE PAD ACTIVATION MODERN-DAY WARFIGHTERS DISRUPT ENEMY OPERATIONS BY DELIVERING PRECISE, LONG-RANGE FIRE ON SELECTED TARGETS. SPECIAL OPERATIONS, POLICE AND SWAT UNITS PROTECT INNOCENT CIVILIANS IN RESIDENTIAL HOSTAGE CRISES, HIGH-RISK SEARCH/ARREST WARRANTS AND OTHER DOMESTIC SITUATIONS. IN ALL OF THESE SITUATIONS, STEINER EOPTICS HIGHLY SOPHISTICATED ILLUMINATION TOOLS AID IN THE DETECTION AND IDENTIFICATION OF THREATS BY ALLOWING THE USER TO MOVE, SHOOT AND COMMUNICATE EFFECTIVELY IN TOTAL DARKNESS WHILE ENSURING MAXIMUM EFFECTIVENESS WITH MINIMUM RISK. MBS-AA LAS/TAC 2 BORELIGHT Quality engineered for a flawlessly centered dot every time, this borelight provides a precise, accurate alignment in the field without firing a single round of ammo. Includes a visible red laser and stainless steel bore rods. Item No. Weight Visible Laser Item No. Weight White Light 3170635 (Black) 5.4 oz. <5 mW red laser Class IIIa 22149 (Black), 22134 (Black) 3.1 oz. 200 lumens • LOW POWER MODE FOR LOW-LIGHT CONDITIONS • FULLY ADJUSTABLE FOR WINDAGE & ELEVATION • ROTARY SWITCH FOR EASY OPERATION • INCLUDES ARBORS FOR THESE CALIBERS: .22/.223/5.56 MM OVERSIZE; .223/5.56MM; 7MM; .30/.308/30-06/7.62MM; .38/.357/9MM; AND .40/10MM/.45/.50 • AMBIDEXTROUS 3-WAY LEVER SWITCH: ON/OFF/MOMENTARY • GENERAL ACCESSORY RAIL FOR GLOCK (22149) OR MIL-STD 1913 PICATINNY RAIL (22134) OWN THE NIGHT WITH THIS SPECIAL P U R P O S E I N F R A R E D I L L U M I N AT O R . WITH A RANGE OF 900 METERS, THE SPIR WILL DETECT AND IDENTIFY THREATS AT GREATER DISTANCES THAN ANY OTHER TACTICAL IR ILLUMINATOR. IT CAN BE HAND-OPERATED OR WEAPON-MOUNTED. STEINER 2015 STEINER-DEFENSE.COM 16 This 200-lumen, recoil-resistant white light LED tactical light provides a brilliant white light with a tight beam for close- to midrange applications. The integrated mounting system enables a quick mount or dismount on a variety of popular pistols. ILLUMINATORS 17 DBAL-PL DBAL-D2 DBAL-D2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-I2 DBAL-A2 DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 Green - Class IIIa Green - Class IIIa Green - Class IIIa - - - - Green - Class IIIa Red - Class IIIa Red - Class IIIa Green - Class IIIa Green - Class IIIa - Green - Class IIIb Red - Class IIIa Red - Class IIIa Red - Class IIIa Red - Class IIIb Red - Class IIIb Green - Class IIIa Green - Class IIIa Green - Class IIIa Green - Class IIIb Class I Class I Class I IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb Class I Class I Class I Class I Class 1 IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb Class I IR - Class IIIb Eye-Safe Eye-Safe Eye-Safe IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb - - - - - Class IIIr - IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb IR - Class IIIb - IR - Class IIIb <5 mW <5 mW <5 mW - - - - <50 mW <5 mW <5 mW <5 mW <5 mW - <50 mW <5 mW <5 mW <5 mW <65 mW <65 mW <5 mW <5 mW <50 mW <50 mW <0.7 mW <0.7 mW <0.7 mW <50 mW <50 mW <50 mW <50 mW <50 mW <0.7 mW <0.7 mW <0.7 mW <0.7 mW <0.7 mW - <50 mW <50 mW <50 mW <50 mW <50 mW <50 mW <50 mW <50 mW <50 mW <600 mW <600 mW <600 mW <50 mW <50 mW <50 mW <50 mW - - - - - <4 mW <50 mW <50 mW <50 mW <50 mW <200 mW <200 mW <50 mW <50 mW <50 mW <50 mW 400 lumens - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 635 nm 635 nm - - - - 635 nm 635 nm 635 nm 642 nm 642 nm - - - - 532 nm 532 nm 532 nm - - - - 532 nm - - 532 nm 532 nm 850 nm 532 nm - - - - - 532 nm 532 nm 532 nm 532 nm 850 nm 850 nm 850 nm 835 nm 835 nm 835 nm 835 nm 850 nm 850 nm 850 nm 850 nm 850 nm 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 850 nm 835 nm 850 nm 850 nm 850 nm 835 nm 835 nm 835 nm 835 nm - - - - - - - 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 835 nm 850 nm 835 nm PEAK ILLUMINANCE WHITE LIGHT Lumen M2 @ 5m: 115 lux - - - - - - - - - - - - - - - - - - - - - - BEAM DIVERGENCE LASERS VISIBLE LASER <0.8 mRad <0.8 mRad <0.8 mRad - - - - <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad - <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad IR LASER POINTER <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad 18° 2° to 30° 2° to 30° 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad - - - - - 95-200 mRad 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad 1-195 mRad - 1-195 mRad - - - - - - - - 250 m / 5 m 250 m / 5 m - - - - 250 m / 5 m 250 m / 5 m 250 m / 5 m 1000 m / 15 m 1000 m / 15 m 750 m / 15 m 750 m / 15 m - 1750 m / 75 m 750 m / 15 m 750 m / 15 m 750 m / 15 m - - - - 1750 m - - 750 m / 15 m 750 m / 15 m - - - - - - - - - 750 m / 15m - >250 m >250 m >250 m 1000 m 1000 m 1000 m 1000 m 1000 m >250 m >250 m >250 m >250 m 300 m 1750 m 1000 m 1000 m 1000 m 1000 m 1000 m 1000 m 1000 m >250 m 1000 m >250 m ≤1000 m ≤1000 m 1000 m 1000 m 1000 m 1000 m - - - - - 200 m 1000 m 1000 m 1000 m 1000 m 2500 m 2500 m 1000 m 1000 m - 1000 m TEMPERATURE BATTERY BATTERY LIFE (MODE DEPENDENT) MATERIAL COLOR WEIGHT (WITH BATTERY) (OZ.) –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C -40° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C CR123A (2) CR123A CR123A CR123A AA CR123A AA CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A CR123A 1.75 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Black Black Desert Sand Black Black Desert Sand Desert Sand Black Black Desert Sand Black Desert Sand Black Black Black Black Desert Sand Black Desert Sand Black Desert Sand Black Desert Sand 5.4 12.5 12.5 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 DIMENSIONS (IN.) (LxWxH) 3.46 x 1.62 x 1.32 3.95 x 3.37 x 1.59 3.95 x 3.37 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Integrated Picatinny QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount QD HT Mount Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes LASER TYPE VISBILE RED / GREEN LASER IR LASER POINTER IR LED ILLUMINATOR WHITE LIGHT RANGE MAY VARY DEPENDING ON LIGHT CONDITIONS. RANGE/VISIBILITY (NIGHT/DAY)* WAVELENGTH VISIBLE RED OR GREEN IR LASER POINTER IR LED ILLUMINATOR POWER OUTPUT 75005 VISIBLE RED LASER VISIBLE GREEN LASER IR LASER POINTER IR LED ILLUMINATOR IR LED ILLUMINATOR VISIBLE RED LASER VISIBLE GREEN LASER IR LASER POINTER IR LED ILLUMINATOR WATERPROOF MOUNT ACTIVATION SWITCH REMOTE CABLE PRESSURE PAD SPECIAL FEATURES 40301D 40072* 40072A* 40072D* 40072DA* 50406* 50433 50433D 50436 50436D 50450 50406* 40090* 40095* 40095D* 50302* 50302D* 50303* 50303D* 50307* 50307D* Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button - Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Co-aligned Visible & IR Aiming Lasers Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail - Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail - Quick-Release Battery Cap, Co-Aligned Visible & IR Lasers, Recoil Resistant White Light LED Technology *Restricted Co-aligned Visible & IR Aiming Lasers Specifications subject to change without notice. EOPTICS SPECIFICATIONS STEINER 2015 STEINER-DEFENSE.COM 18 WINDAGE & ELEVATION ADJUSTMENT 40301 19 LASERS DBAL-A3 DBAL-A3 DBAL-A3 DBAL-A3 CQBL-1 CQBL-1 AR-2A OTAL-A OTAL-A OTAL-C OTAL-C IR MBS-AA Borelight Green - Class IIIb Green - Class IIIb Green - Class IIIa Green - Class IIIa Red - Class IIIa Red - Class IIIa Red - Class IIIa Green - Class IIIa Red - Class IIIa Red - Class IIIa - Red - Class IIIa IR - Class IIIb IR - Class IIIb Class 1 Class 1 Class I Class I - - Class I - Class I - IR - Class IIIb IR - Class IIIb Class IIIr Class IIIr - - - - - - - - IR LED ILLUMINATOR WHITE LIGHT 50325D 60603 60603D 24435 19146 19241 19215 19217 <50 mW <50 mW <5 mW <5 mW <5 mW <5 mW <5 mW <50 mW <50 mW <5 mW - <5 mW / <1 mW <50 mW <50 mW <0.7 mW <0.7mW <0.7 mW <0.7 mW - - - - <0.7 mW - <200 mW <200 mW <4 mW <4 mW - - - - - - - - - - - - - - - - - - - - - - 635 nm 635 nm 635 nm - - 635 nm - 635 nm 532 nm 532 nm 532 nm 532 nm - - - 532 nm 532 nm - - - 835 nm 835 nm 850 nm 850 nm 850 nm 850 nm - - - - 850 nm - 835 nm 835 nm 835 nm 835 nm - - - - - - - - - - - - - - - - - - - Mk3 Mk4 Mk4 Mk5 Mk7 Mk7 Mk7 Mk7 SPIR MP5 Foregrip MP5K Grip LAS/TAC 2 LAS/TAC 2 IR LED Illuminator - - - - - - - IR LED Illuminator - - - - <600 mW / <150 mW - - - - - - - <600 mW / <300 mW - - - - 850 nm - - - - - - - 850 nm - - - - Eye-Safe - - - - - - - Eye-Safe - - - - 8° - - - - - - - 2° to 30° - - - - 200 m - - - - - - - 1,000 m - - - - White Light LED White Light LED White Light LED White Light LED White Light LED White Light LED White Light LED White Light LED - Recoil Resistant LED White Light LED White Light LED White Light LED 500 Lumens 500 Lumens 500 Lumens 800 Lumens 350 Lumens 350 Lumens 350 Lumens 350 Lumens - 200 Lumens 200 Lumens 200 Lumens 200 Lumens 10° 10° 10° 10° 10° 10° 10° 10° - 8° 8° 10° 10° 250 m 300 m 300 m 500 m 100 m 100 m 100 m 100 m - 115 m 115 m 115 m 115 m Total Internal Reflection Lens Total Internal Reflection Lens Total Internal Reflection Lens High Output Deep Dish Total Internal Reflection Lens Total Internal Reflection Lens Total Internal Reflection Lens Total Internal Reflection Lens - High Intensity Reflector High Intensity Reflector High Intensity Reflector High Intensity Reflector BATTERY CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) CR123A (2) BATTERY LIFE ≥1.25 Hours ≥1.25 Hours ≥1.25 Hours ≥1 Hour ≥1 Hour ≥1 Hour ≥1 Hour ≥1 Hour 2 Hours ≥1.5 Hours ≥1.5 Hours >1.5 Hours >1.5 Hours High-Impact Polymer High-Impact Polymer High-Impact Polymer High-Impact Polymer 60455 3170635 LIGHT OUTPUT - POWER OUTPUT (HIGH / LOW) WAVELENGTH FDA CLASS BEAM DIVERGENCE RANGE (HIGH POWER) LAMP POWER OUTPUT (HIGH / LOW) BEAM DIVERGENCE RANGE (HIGH POWER) RANGE MAY VARY DEPENDING ON LIGHT CONDITIONS. REFLECTION LENS VISIBLE LASER IR LASER POINTER IR LED ILLUMINATOR VISIBLE RED LASER VISIBLE GREEN LASER IR LASER POINTER IR LED ILLUMINATOR TEMPERATURE BATTERY BATTERY LIFE (MODE DEPENDENT) MATERIAL COLOR WEIGHT (WITH BATTERY) (OZ.) DIMENSIONS (IN.) (LxWxH) WATERPROOF MOUNT WINDAGE & ELEVATION ADJUSTMENT ACTIVATION SWITCH REMOTE CABLE PRESSURE PAD SPECIAL FEATURES <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad <0.8 mRad - - <0.8 mRad - - - 1-195 mRad 1-195 mRad 95-200 mRad 95-200 mRad - - - - - - - - 1750 m / 75 m 1750 m / 75 m - - 250 m / 5 m 250 m / 5 m - 250 m / 5 m - 250 m / 5 m 250 m / 5 m 250 m - - 750 m / 15 m 750 m / 15 m - - - - - - - - 1000 m 1000 m 300 m 300 m >250 m >250 m - - - - >250 m - 2500 m 2500 m 200 m 200 m - - - - - - - - –10° C to +65° C –10° C to +65° C -40° C to +65° C -40° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C CR123A CR123A CR123A CR123A CR123A CR123A AA CR123A CR123A AA AA AA > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours > 3 Hours 5 Hours 8 Hours Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Black Desert Sand Black Desert Sand Black Desert Sand Black Black Black Black Black Black 8 8 8 8 6 6 5.6 6 8 4.9 4.9 5.4 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 3.5 x 2.75 x 1.59 4.0 x 1.5 x 1.1 4.0 x 1.5 x 1.1 5.125 x 1.5 x 1.7 3.8 x 1.8 x 1.45 3.5 x 2.75 x 1.59 2.8 x 1.4 x .73 2.8 x 1.4 x .73 9.25 (L) Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 3 m QD HT Mount QD HT Mount QD HT Mount QD HT Mount Integrated Picatinny Integrated Picatinny Attached to A-Frame Front Sight QD HT Mount QD HT Mount QD HT Mount QD HT Mount Stainless Steel Bore Rod (2) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Rotary Switch Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes - - - Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Co-aligned Visible & IR Aiming Laser Co-aligned Visible & IR Aiming Laser Dual Side Rails For Mounting Tactical Lights or Other Accessories Low Profile For Mounting in Front of Scopes, Holographic or NV Sights Pre-Drilled Mounting For Optional Red Dot Sight or MIL-STD 1913 Top Rail Low Profile For Mounting in Front of Scopes, Holographic or NV Sights Low Profile For Mounting in Front of Scopes, Holographic or NV Sights Supplied With Arbors For Most Rifle, Carbine, Submachine Gun and Pistol Calibers *Restricted Specifications subject to change without notice. 60460 60460D 76000 9075 9076 9077 9078 60480 39992LED 27313 22149 22134 Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum Aircraft Aluminum High-Impact Polymer Black Black Desert Sand Black Black Black Black Black Black Black Black Black Black 8 4.9 4.9 6.1 4.1 4.1 4.1 4.1 6.5 11.13 5.7 3.1 3.1 DIMENSIONS (IN.) (LxWxH) 3.97 x 2.18 x 1.73 6.04 (L) 6.04 (L) 6.44 (L) 3.54 (L) 3.54 (L) 3.54 (L) 3.54 (L) 6.75 x 1.55 x 1.95 9.5 x 2.125 x 3 3.9 x 1.5 x 4.9 3.9 (L) 3.9 (L) TEMPERATURE RANGE –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C –10° C to +65° C Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 5 m Submersible to 3 m Submersible to 3 m Submersible to 3 m Submersible to 3 m Submersible to 5 m Submersible to 20 m Submersible to 5 m - - MIL-STD-1913/ Picatinny rail MIL-STD-1913/ Picatinny rail MIL-STD-1913/ Picatinny rail MIL-STD-1913/ Picatinny rail - - - - MIL-STD-1913/ Picatinny rail - Pin Mount General Accessory Rail (Glock) MIL-STD-1913/ Picatinny rail Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Integrated Push Button Momentry/Kill Switch Integrated Push Button 3-Way Lever Switch Integrated Push Button Optional Optional Optional Optional - - - - Optional - - - - Yes - - - - - - - - - - - - Instantly Switch Between White Light Illumination (With or Without Strobe) or IR LED Illuminator Comes with 1913 Mount, Dual-Purpose Tailcap and Remote Pressure Pad / Optional Y-Cable Connects Mk4 to DBAL-A3 Laser Comes with 1913 Mount, Dual-Purpose Tailcap and Remote Pressure Pad / Optional Y-Cable Connects Mk4 to DBAL-A3 Laser Handheld or Weapon-Mounted with Optional Accessories Rem. 870/1100/1187 Mossberg 500 Beretta 1301 Benelli M4/Nova Available in Handheld or Weapon-Mount Compatible with Suppressors - Ambidextrous Switch, Recoil Resistant LED Ambidextrous Switch, Recoil Resistant LED MATERIAL COLOR WEIGHT (WITH BATTERY & MOUNT) (OZ.) WATERPROOF MOUNT ACTIVATION SWITCH REMOTE CABLE PRESSURE PAD LOW BATTERY INDICATOR SPECIAL FEATURES EOPTICS SPECIFICATIONS STEINER 2015 STEINER-DEFENSE.COM 20 50325 LAMP PEAK ILLUMINANCE BEAM DIVERGENCE RANGE MAY VARY DEPENDING ON LIGHT CONDITIONS. RANGE/VISIBILITY (NIGHT/DAY)* VISIBLE RED LASER VISIBLE GREEN LASER IR LASER POINTER 50308D* LIGHT OUTPUT LASER TYPE VISBILE RED / GREEN LASER IR LASER POINTER IR LED ILLUMINATOR WHITE LIGHT WAVELENGTH POWER OUTPUT 50308* VISIBLE RED OR GREEN IR LASER POINTER IR LED ILLUMINATOR BATTLE LIGHTS & ILLUMINATORS 21 CU STOMER S ERVICE YOUR STEINER EOPTICS ARE BACKED BY A COMMITMENT TO OPTIMUM PERFORMANCE AND YOUR COMPLETE SATISFACTION. ANY QUESTIONS OR CONCERNS WILL BE QUICKLY ADDRESSED BY ONE OF OUR EXPERT SALES REPRESENTATIVES. PLEASE CONTACT ANY OF THE INDIVIDUALS BELOW IF YOU HAVE A QUESTION OR SERVICE NEED: TONY CARR MICHAEL KEEGAN PH +1 831-373-0701 X222 PH: +1 831-373-0701 X204 MOB: +1 831-915-2587 MOB +1 831-809-4054 TCARR@STEINER-EOPTICS.COM MKEEGAN@STEINER-EOPTICS.COM JASON CLARK PH: +1 831-373-0701 X221 MOB: +1 831-594-5566 JCLARK@STEINER-EOPTICS.COM STEINER 2015 STEINER-DEFENSE.COM STEINER-DEFENSE.COM 22 CUSTOMER SERVICE 23 STEINER-DEFENSE.COM UNITED STATES STEINER EOPTICS ® 70 Garden Court Monterey, CA 93940 USA Tel: +1 831-373-0701 Fax: +1 831-373-0903 Sales@steiner-eoptics.com Certified to ISO 9001:2008 © 2015 Printed in USA Item No. 10094