AM5496 Auction Brochure

ONLINE AUCTION
ONLINE AUCTION
(unless sold prior by private treaty)
(unless sold prior by private treaty)
Auction closes from 1300 Local (12 Noon BST)
Thursday 16th September
Auction closes from 1300 Local (12 Noon BST)
Thursday 16th September
Dismantling & Removal
All lots are sold ‘as is where is’ with the purchaser responsible for dismantling and removal. The seller will be
responsible for disconnection from all mains services. Approved Dismantling Contractor CI EMME.A Srl will be
available on site to provide estimates of dismantling and packing any of the lots
included in the auction. Please contact CJM Asset Management in the first instance.
Register to bid at Bidspotter.eu
Viewing
Strictly by appointment on Tuesday 8th/Wednesday 9th September.
Please call +44 (0)1724 334411/sales@cjmasset to make an appointment.
Earlier appointments may also be accommodated.
Travel & Accommodation
The nearest airport is Cagliari about 90km north east of Portoscuso. Car Hire is available at the airport. Hotels
in Portoscuso include Don Pedro www.hotel-donpedro.com and The Panorama www.cortehotelpanorama.com
All plant and equipment is sold in accordance with CJM Asset
Management’s General Conditions of Sale for Sale By Online
Auction as posted at bidspotter.eu
This brochure does not constitute a formal offer for sale and
the details are expressly excluded from any sale contract.
All lots are offered on a “buyer to remove” basis and
no warranty is given, expressed or implied as to the condition
of any lot or its fitness for use.
Potential purchasers must satisfy themselves
as to the condition and capacities of each lot and must not rely
on information provided
by CJM Asset Management or Parkegate Ltd.
The Contents of an Aluminium
Sheet and Foil Plant
n
n
n
n
n
n
n
n
2 x Tecmo Hunter Twin Roll Casters
Fata Hunter 1700mm Cold Mill
2 x Fata Hunter 1600mm Foil Mills
Process Lines including Stretching/Cleaning Line;
CTL and Slitting Lines; Foil Separator/Slitters; Roll Forming Line;
Coil Coating/Painting Line
Coil and Foil Annealing Furnaces
Contents of Roll Shop inc Grinders, Lathes etc
Altek Dross Press; Foil Recovery/Briquetting Plant;
Various Coil Upenders; Furnace Charging Car etc
General Factory Equipment including Overhead Travelling Cranes,
Storage Racks, Stores including Bearings, Motors etc
Can We Help You?
CJM/Parkegate specialise in the valuation and
sale of used metal processing equipment for clients
around the world. We can provide formal valuations for all purposes
including impairment, secured lending, intercompany transfer,
tax/customs duty assessment and sale.
In addition we have considerable experience and expertise
in the remarketing and sale of a wide range of processing equipment
for all ferrous and non-ferrous metal businesses. For a confidential
discussion without obligation please contact the Joint Selling Agents.
Further information contact
Edward Denniss
+44(0) 7876 682 341
edward.denniss@cjmasset.com
Charles Moses F.R.I.C.S
+44(0) 7831 854 971
charles.moses@cjmasset.com
Location: Portovesme Aluminium, Zona Industriale Portovesme,
09010 Portoscuso, Sardinia, Italy
Dr Phil Thomas
+44(0)7738 804761
phil.thomas@parkegate.co.uk
Viewing:Strictly by appointment on Tuesday 8th and
Wednesday 9th September, Call us to confirm your visit.
Fyrebrand Limited trading as CJM Asset Management. Registered in England Number 4046197 Registered Office: CJM Auction Centre,Dunlop Way,
Scunthorpe, DN16 3RN, United Kingdom Tel +44 (0) 1724 334411 Fax +44 (0) 1724 334422 Email sales@cjmasset.com Web www.cjmasset.com
Edward Denniss
+44(0) 7876 682 341
edward.denniss@cjmasset.com
Charles Moses F.R.I.C.S
+44(0) 7831 854 971
charles.moses@cjmasset.com
Dr Phil Thomas
+44(0)7738 804761
phil.thomas@parkegate.co.uk
Location: Portovesme Aluminium, Zona Industriale Portovesme,
Viewing: Strictly by appointment on Tuesday 8th and
09010 Portoscuso, Sardinia, Italy
Wednesday 9th September, Call us to confirm your visit.
Fyrebrand Limited trading as CJM Asset Management. Registered in England Number 4046197 Registered Office: CJM Auction Centre,Dunlop Way,
Scunthorpe, DN16 3RN, United Kingdom Tel +44 (0) 1724 334411 Fax +44 (0) 1724 334422 Email sales@cjmasset.com Web www.cjmasset.com
Introduction
Our client Reno Industria srl, a leading local construction business, purchased the assets of
ILA Aluminium from the Trustee in Bankruptcy with the intention of restarting the Aluminium Plant at
Portovesme, south west Sardinia, producing aluminium strip, sheet and foil from continuously cast
aluminium coil. The key to the project was low cost clean energy from a proposed wind farm.
Unfortunately planning consent was not forthcoming and after exhausting the appeal process Reno have now
abandoned the project and instructed CJM Asset Management to sell all the manufacturing assets by online
auction unless sold previously by private treaty.
The equipment has not been put into production for about 3 years but has been looked after and maintained by
Reno Industria and offers an excellent opportunity to those seeking to bid for and buy good quality mills and processing equipment at very competitive prices.
The full catalogue for the auction together with all Terms and Conditions is posted at Bidspotter.eu where interested
parties can register to bid. The auction is being conducted in €uro and closes from 1300 local (12 noon BST) on
Thursday 16th September. All goods are sold ‘as is where is’ and the successful bidder in each case will pay a
Buyers Premium of 12.5% over and above the Hammer Price.
Principal assets in the auction are briefly described below. Detailed specifications are available on the Bidspotter
platforms or upon request to the Auctioneers:
n Hunter 4Hi Non Reversing Cold Mill
- 1700mm Wide; Max Entry Gauge 80mm; Min Exit Gauge 0.11mm
n 2 x Tecmo Hunter 4Hi Non Reversing Foil Mills
- Width 1680 and 1600mm; Gauge 0.6-2x0.008mm. Motors 750KW and 590KW
n 2 x Tecmo Twin Roll Continuous Casting Machines
- 2 Water Cooled Rolls 15ͦ angle; 640mm dia; 2 x Rollstar Planetary Gearboxes
n Processing Lines
- Olma/Tecmo Hunter 1650mm, Roll Forming/Corrugating Line 0.4-2.5mm;
- Tecmo Hunter CTL Line 500-1600mm wide; 0.3-2.5mm gauge;
- Tecmo Stretching/Levelling Line with Cleaning Section 800-1650mm Wide; 0.3-1.6mm gauge;
- Olma/Tecmo Hunter Medium Gauge Slitter, 1600mm wide, 0.2-2.0mm gauge;
- Tecint Coil Coating and Painting Line 1000-1600mm wide;0.27-1.5mm gauge, speed approx. 60m/min;
- Scrap Baling and Briquetting Plant;
- Altek Dross Press;
- Kampf and Tecmo Hunter Foil Separating Slitters;
- Coil and Foil Annealing Furnaces;
- Coil Upenders;
- TT Furnace Charging Tractor;
- Spools;
- Coil Stands etc
Roll Grinding & General Factory Equipment
2 x Giustina Farrel Travelling Head/Fixed Head Roll Grinders; Clovis 50 Roll Turning Lathe; Various other Press
Brakes, Presses, Bandsaws etc; Various Overhead Electric Travelling Cranes up to 20 tonnes capacity;
Omig/Autogru 120 12 tonne Mobile Crane; Conte and other Coil Lift C Clamps; Lifting Beams, Tipping Skips,
Atlas Copco ZR400 Air Compressors, Boilers etc
Contents of Stores
Over 4000 Bearings, over 150 Electric Motors; Gearboxes, Pumps, general spares and consumables etc