Blum Brochure 2013

Transcription

Blum Brochure 2013

B
lu
m
S
to
ck
P
ro
g
ra
m
Contents
Page 1
Tandembox Drawers
D Height
Page 17
Page 2
Tandembox Drawers
K Height
Page 18
CLIPtop Blumotion
CLIPtop Hinges
TIP-ON for Tandembox.
CLIP Base Plates
Page 6
TIP-ON for Doors
Page 10
Tandembox Intivo
M Height
Page 11
Tandembox Intivo
D Height with
Boxcap Solid sides
Servo Drive for Drawers
Introduction
Page 19
Movento and
Tandem Runners
Single/Full Extension
Page 20
Tip On for
Tandem Runners
Page 23
Aventos HK
Stay Lift System
Page 24
Page 12
Tandembox Intivo
D Height with
Frosted Glass sides
Aventos HF
Bi-Fold System
Page 25
Page 13
Tandembox Intivo
Inner Drawers
Page 14
Tandembox Drawers
M Height
Page 15
Tandembox Drawers
B Height
Page 16
Aventos HS
Up and Over System
Page 26
Aventos HL
Lift Up System
Page 28
Aventos HKS
Stay Lift System
Introduction to Servo
Drive for Aventos
Page 30
71B3550
CLIPtop BLUMOTION Range
The CLIPtop BLUMOTION concealed hinge is
Blum’s first to include fully integrated
BLUMOTION soft close within the hinge itself the latest advance in Blum’s efforts to “perfect
motion”.
Overlay Application
71B3550
CLIPtop Blumotion Hinge 110˚ Sprung
All nickel plated steel
71T3550
CLIPtop Hinge 110˚ Sprung (To be used
with the above hinge to reduce the cost if
two CLIPtop Blumotion hinges are not
required). All nickel plated steel
79B9550
CLIPtop Blumotion 95˚ Blind Corner Hinge
Sprung. All nickel plated steel
70.1503
Hinge Arm Cover Cap. Nickel plated steel
70T3504
Hinge Boss Cover Cap. Nickel plated steel
71B9550
CLIPtop Blumotion 95˚ Profile Hinge
79B3558
CLIPtop Blumotion 45˚ Cross Corner Hinge
79B9555
CLIPtop Blumotion 20˚ Angle Hinge
79B9557
CLIPtop Blumotion 37˚ Angle Hinge
70.1563
70T3504
79B9550
71B9550
79B3558
Inset Application
71B3750
71B3750
CLIPtop Blumotion 110˚ Inset Application
Hinge. Sprung. All nickel plated steel
70.1663
70T3504
Order online at www.woodfit.com
1
CLIPtop Hinges
Resistance free ‘spiral-tech’ continuous
depth adjustment on one screw ‘in’ and
‘out’ from the cabinet face.
107˚ Opening - Overlay Application
75T1590
CLIPtop Inserta - Sprung - Illustrated
75T1550
CLIPtop Screw-on – Sprung
973A0500
Clip On Blumotion Nickel plated steel
70.1503
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Hinge Boss Cover Cap
Nickel plated steel
71T5590
CLIPtop Inserta - Sprung
71T5550
70T5550
CLIPtop Screw-on Unsprung
All nickel-plated steel
973A0500
Clip On Blumotion Nickel plated steel
70.1503
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Nickel plated steel
CLIPtop Inserta - Sprung - Illustrated.
71T6550
70T6550
CLIPtop Screw-on Unsprung
973A6000
Clip On Blumotion
Nickel plated steel
80.6507
Hinge Arm Cover Cap
Nickel plated steel
max 65
99
71T6540
3-8
2
8
11
F
CLIPtop Hinges
Blind Corner Hinge
Resistance free ‘spiral-tech’ continuous
depth adjustment on one screw ‘in’
and ‘out’ from the cabinet face. The
‘Blind Corner’ Hinge is the answer to
fitting doors to cabinets with a front
overlay frame - see illustration.
95˚ Opening - Overlay
Application
79T9550
CLIPtop Screw-on Blind
Corner – Sprung
70.1503
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Nickel plated steel
79T9550
45˚ Corner Hinge
Spiral-tech depth adjustment on one
screw in hinge arm ‘in’ and ‘out’ from
the cabinet face. For use in corner
cabinets with overlay doors – see
illustration
110˚ Opening - Overlay
Application
79T5550
CLIPtop Screw-on 45˚ Corner
– Sprung. All nickel plated steel
973A7680
Clip On Blumotion
Nickel plated steel
70.1503
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Nickel plated steel
79T5550
These dimensions are
based on a 19mm carcase
thickness. Dimensions
would need to be
changed if either
thickness varied from
19mm. In these cases a
trial application is
recommended.
Some applications require
the mounting plate to
vary from the standard
position.
3
CLIPtop Hinges
71T9550
CLIPtop Profile Hinge Overlay Screw on - Sprung
973A0500 Clip On Blumotion
Nickel plated steel
Resistance free ‘spiral-tech’ continuous depth adjustment
on one screw ‘in’ and ‘out’ from the cabinet face.
‘Profile Hinges’ are the answer for thicker doors, or doors
with a moulding on the face - see illustrations.
70.1563
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Nickel plated steel
95˚ Opening - Dual Overlay
Application
71T9650
CLIPtop Profile Hinge - Screw on Sprung. All nickel plated steel
70.1663
Hinge Arm Cover Cap
Nickel plated steel
70T1504
71T9550
107˚ Opening Dual Application
75T1650
CLIPtop Hinge screw on Sprung
71T9650
70.1663
Hinge Arm Cover Cap
Nickel plated steel
70T1504
170˚ Opening Dual Application
71T6650
CLIPtop Hinge screw on Sprung
Nickel plated steel
80.6507
Hinge Arm Cover Cap
Nickel plated steel
95˚ Opening - Inset Application
71T9750
71T9750
CLIPtop Profile Hinge inset – Screw
on - Sprung. All nickel plated steel
75T1750
107˚ Inset Application Hinge
Nickel plated steel
4
70.1663
Hinge Arm Cover Cap
Nickel plated steel
70T1504
Nickel Plated steel
CLIPtop Hinges
CLIPtop Zero
Protrusion Hinges
When fitting drawers into cabinets
with hinged doors it is necessary to
allow the doors to open up to a
position so that the inner edge of
the door is clear of the drawer on
exit. This hinge has been designed
to overcome this problem, fitted in
the gaps between the drawers.
Resistance free ‘spiral-tech’
continuous depth adjustment on
one screw ‘in’ and ‘out’ from the
cabinet face.
Sprung Hinge Zero
Protrusion CLIPtop
973A7000
Clip on Blumotion
Nickel plated steel
70.7503
Hinge Arm Cover Cap
Nickel plated steel
max 56
67
71T7500N
71T7500
3-6
F
0
12
CLIPtop Bi-Fold Door Hinge
79T8500
Sprung 170˚ Hinge
70.1503
Hinge Arm Cover Cap
Nickel plated steel
79T8500
min 11
37
35
18
65
12.5
13
The solution to a corner door set
where the hinge is concealed. Used
in conjunction with a standard 170˚
hinge (door to side panel) gives full
access to the cabinet interior.
60°
5
Base Plates
Clip and Inserta Hinge
Mounting Plates
Plates
Attention: It is
important that
every hinge on
a door is
adjusted by the
same amount
and in the
same direction.
For best results
always start at
the top hinge.
173 H 7100 0mm Spacing Plate
Cam Adjustable
Cam Adjustable
All steel nickel plated, two part with
integral height adjustment, and
woodscrew fixing holes.
6g csk (2)
This plate features an all steel nickel plated
two part unit with integral cam height
adjustment, and the ‘Blum’ pre-mounted
Split Dowel and Screw System for quick
and easy assembly.
Drilling
depth
11.5mm
32
5
*
*
37
174H7100E 0mm Spacing Plate Cam
Adjustable + Dowel & Screw.
0mm Spacing Plate
173 L 6130
3mm Spacing Plate
*
32
173 L 610
37
* Fix with
additional
screw if used
with wide
angle hinges
All steel nickel plated, with woodscrew
fixing holes.
5
6g csk (2)
0mm Spacing Plate
173 L 8130
3mm Spacing Plate
*
32
173 L 810
37
* Fix with
additional
screw if used
with wide
angle hinges
All steel nickel plated, with integral system
screws.
*
32
37
Zinc die cast nickel plated, two parts, with
integral height locking screw.
* Fix with
additional
screw if used
with wide
angle hinges
6g csk (2)
175 H 9190.22
Use all 3 screw
holes
18mm Spacing Plate
Zinc die cast nickel plated, for use with
Hinge 71T9750 (please enquire) where ‘x’
has a minimum value of 18mm and a max
of 21mm.
661.1150 system screw (2) + 6g csk (1)
6
x
70.1503
Plain arm cover cap
Nickel
The Blum CLIPtop hinge system is the
latest development in hinge design and
offers CLIP technology for easy mounting
of doors.
A smooth modern integrated appearance
can be achieved by fitting a steel nickel
plated curved push-on Hinge Arm Cover
Cap, and a curved push-on Boss Cover Cap
on the Screw-on versions.
For a fully integrated appearance add the
straight Mounting Plate, although any of
the CLIP mount plates are suitable.
70T1504
Hinge boss cover cap
Nickel
Smooth integrated modern
appearance
Straight Mount Plate
CLIPtop Hinge System
Add to this the extra CLIPtop technology
featuring;
n Resistance free ‘spiral-tech’ Continuous
Depth Adjustment on one screw ‘in’ and
‘out’ from cabinet face
n An Additional Locking Pin between the
hinge arm and mount plate which
guarantees that the hinge performs
perfectly even when subject to
extraordinary loads.
‘Clip’ into place
n All pressed steel Nickel Plated finish with
indentations in the boss to take the
cover cap.
70.1503
Plain arm cover cap - Nickel
70T1504 Hinge boss cover cap - Nickel
175H5400 0mm CLIP mount plate straight
Continuous Depth Adjustment on
one screw ‘in’ and ‘out’ from
cabinet face
175H5400
0mm Clip mount plate - straight
Please note due to the opening geometry of 170˚ hinges there is a small gap in the opening mechanism which
could be a danger to small children.
We would advise that where cabinets are accessible to small children that doors are fitted with a child safety
latch.
7
Clip-On Blumotion
BLUMOTION for cabinet doors
Clip-on BLUMOTION for cabinet doors
BLUMOTION for Doors
This controlled closing mechanism
for doors allows the door to close
silently and effortlessly - suitable for
sprung hinges only.
973A0500 Blumotion suitable for
the following hinges.
973A0700 Blumotion suitable for the
following hinges.
75T1590
71T1750
75T1550
75T9750
BLUMOTION can now be
integrated into cabinets with
doors. It does not require any
change to the hinge assembly. The
BLUMOTION mechanism is
attached onto the CLIPtop or CLIP
hinge.
71T5590
The CLIP function remains intact
when BLUMOTION is added and
tool-free removal enables you to
make hinge adjustments.
In general, dependent on the door
height, one BLUMOTION would be
sufficient for doors upto 395mm
wide. Anything above would
require two BLUMOTION.
71T5550
70T5550
973A0600 Blumotion suitalbe for the
following hinges
71T9550
71T9650
71M2550
75T1650
973A6000 Blumotion suitable for
the following hinges.
71T6540
following hinges
79T5550
71T6550
70T6550
71T6650
following hinges
71T7500N
Hinge Repair Plate
System Screw
HP100 Hinge Repair Plate
- Bright Zinc
This Repair Plate is for repairing the
hinge mount locations where the
Euro screw mounting threads are
damaged or the screws have been
pulled out - 32mm centres and
37mm in from the carcase front
edge.
The hinge mount plate is fixed to
the repair plate using the existing
Euro screws and the assembly is then
fixed to the carcase through the
repair plate.
8
661.1150 System Screw
6 x 11.5mm
Technical Data
Drilling Doors
Each range of
hinge has a choice of opening angle and
function. The physical dimensions of these hinges vary slightly, and the
drilling pattern varies slightly in each range. The chart below indicates
the drilling dimensions for each range.
Drilling
Distance
Drilling
Distance
Drilling Depth
F
+
+
D
Knock in / Inserta
Screw on
Range
Angle of
Movement
CLIPtop BLUMOTION
E
Boss Dia
A
Edge Drill
Distance B
Depth
C
All variants
35 + 0.2mm
3 to 7mm
13mm
CLIPtop Inserta
107 degrees
35 + 0.2mm
3 to 6mm
11.5mm
CLIPtop Screw-on
107 degrees
35 + 0.2mm
3 to 6mm
11.5mm
CLIPtop Inserta
120 degrees
35 + 0.2mm
3 to 6mm
12.6mm
CLIPtop Screw-on
120 degrees
35 + 0.2mm
3 to 6mm
12.6mm
CLIPtop Inserta
170 degrees
35 + 0.2mm
3 to 6mm
11mm
CLIPtop Screw-on
170 degrees
35 + 0.2mm
3 to 6mm
11mm
CLIPtop Profile - Screw-on
95 degrees
35 + 0.2mm
3 to 6mm
12mm
CLIPtop Blind Corner - Screw-on
95 degrees
35 + 0.2mm
3 to 6mm
12mm
CLIPtop 45’ Screw-on
110 degrees
35 + 0.2
3 to 6mm
12.8mm
CLIP Screw-on
100 degrees
35 + 0.2mm
3 to 6mm
10.5mm
CLIP Screw-on
107 degrees
35 + 0.2mm
3 to 6mm
12mm
CLIP Screw-on
170 degrees
35 + 0.2mm
3 to 6mm
11mm
CLIP Screw-on
Bi-fold Door
35 + 0.2mm
3 to 6mm
11mm
CLIP Screw-on
20 degrees
35 + 0.2mm
3 to 6mm
12mm
CLIP Screw-on
37 degrees
35 + 0.2mm
3 to 6mm
12mm
CLIP Screw-on
25 deg. Acute
35 + 0.2mm
3 to 6mm
12.5mm
CLIP Screw-on - Mini
94 degrees
26 + 0.2mm
3 to 6mm
12.5mm
CLIP Glass Door
94 degrees
26 + 0.2mm
505 to 7mm
Modul Screw-on
100 degrees
35 + 0.2mm
3 to 6mm
10.5mm
Modul Screw-on
107 degrees
35 + 0.2mm
3 to 6mm
11.5mm
Modul Screw-on
170 degrees
35 + 0.2mm
3 to 6mm
11mm
Modul Screw-on
45 degrees
35 + 0.2mm
3 to 6mm
11.5mm
Modul Blind Corner - Screw-on
95 degrees
35 + 0.2mm
3 to 6mm
12mm
153 degrees
35 + 0.2mm
3 to 6mm
12mm
Modul Zero protrusion - Screw-on
Offset
Hole
Holes D Centre E
Hole Dia/
F
Depth
9.5mm
45mm
8 x12mm
9.5mm
45mm
8 x 12.8mm
9.5mm
45mm
8 x11mm
We have tried to illustrate as much detail of the application of the ranges we stock, but if you require any further details, or
details of special application hinges, we can supply a full technical data sheet - please ask.
Liability
All Blum products undergo strict quality control procedures through all stages of production. All Blum fittings are designed for indoor use
only (for furniture constructions with wood, chipboard or a comparable material). Careful attention must be paid to fitting or operating
instructions when using Blum products (see catalogues, operating manuals for all technical information). The manufacturer must decide on
the screws or fixing methods to suit the material being used (ie wood, chipboard etc). The fittings must not be exposed to acidic or corrosive
materials (ie some household cleaning solutions). To ensure that Blum products function correctly they must be kept clean and undamaged.
9
TIP-ON for Doors
Push-to-Open
TIP-ON
Handle-less furniture is becoming more
and more popular. With TIP-ON we
offer a mechanical opening support
system for handle-less furniture doors.
A light touch opens the door. To close
the door, it can be lightly pressed shut
or closed with a light swing. The TIP-ON
magnet works with a catch plate to
ensure secure closing. The standard
version is used for overlay doors and
the extended version is used for high
cabinets and inset doors. Both versions
can be drilled into the cabinet end
panel or attached using adaptor plates.
Use with 70T5550 Unsprung clip hinge
120˚ or 70T6550 Unsprung clip hinge
170˚
955.1004
955.1201
10
TIP-ON “standard version” nylon,
dust grey with magnet. Includes
self adhesive and screw-on catch
plates. For doors with a height
less than approx 1300mm.
955A1004
TIP-ON “extended version” nylon,
dust grey with magnet. Includes
self adhesive and screw-on catch
plates. For doors higher than
approx 1300mm.
955.1501
TIP-ON adaptor plate
Cruciform
TIP-ON horizontal adapter
plate screw on grey nylon.
Including Integrated BLUMOTION
Soft Closing
Intivo Standard Drawer
83mm - M Height
3. Back Fixing Brackets
Z30M000SW
White
Z30M000SG
Grey
Z30M000SN
Nickel
Tandembox Intivo – M Height
5
1. Tandem Runner - left/right
Length
30kg
50kg
65kg
450mm 558.4501B
559.4501B
556.4501B
4. Front Fixing Brackets
500mm 558.5001B
559.5001B
556.5001B
ZSF.3502 Screw on
270mm 558.2701B
2. Drawer Sides left/right
Length
White
Grey
5. Cover Caps
Stainless
Steel
270mm 358M2702SW
358M2702SG
358M2702IA
450mm 358M4502SW
358M4502SG
358M4502IA
500mm 358M5002SW
358M5002SG
358M5002IA
8
ZAA.532CW
White x 2
ZAA.532CG
Grey x 2
Please note the stainless steel drawer sides
come complete with cover caps.
11
Tandembox Intivo – D Height
7
5
1
Soft Closing
Intivo D Height Drawer
With Boxcap Solid Sides
199mm
2. Drawer Sides left/right (101mm High)
Length
Length
30kg
50kg
65kg
450mm 558.4501B
559.4501B
556.4501B
500mm 558.5001B
559.5001B
556.5001B
White
Grey
Stainless
Steel
450mm 358L4502SW
358L4502SG
358L4502IA
500mm 358L5002SW
358L5002SG
358L5002IA
7. Boxcap Solid Sides
Length
White
Grey
Stainless
Steel
450mm Z37L440SDW
Z37L440SDG
Z37L440ID
500mm Z37L490SDW
Z37L490SDG
Z37L490ID
Z30D000SW
White
Z30D000SG
Grey
Z30D000SN
Nickel
5. Cover Caps
ZSF.5220 Screw-on
12
ZAA.532CW
White x 2
ZAA.532CG
Grey x 2
2
5
1
Soft Closing
Intivo D Height Drawer
With Boxcover Frosted
Glass Sides 199mm
2. Drawer Sides left/right
Length
Length
30kg
50kg
65kg
450mm 558.4501B
559.4501B
556.4501B
500mm 558.5001B
559.5001B
556.5001B
White
Grey
Stainless
Steel
450mm 358L4502SW
358L4502SG
358L4502IA
500mm 358L5002SW
358L5002SG
358L5002IA
Tandembox Intivo – D Height
10
9a and 9b Boxcover Bracket Set
10. Boxcap Frosted Glass Sides
Length
450mm Z37G390DSA
500mm Z37G440DSA
White
Grey
Stainless
Steel
Z36L002GSW
Z36L002GSG
Z36L002GI
Z30D000SW
White
Z30D000SG
Grey
Z30D000SN
Nickel
5. Cover Caps
ZAA.532CW
White x 2
ZAA.532CG
Grey x 2
ZSF.5220 Screw-on
13
Tandem Intivo-Inner Drawers
Intivo M Height Inner
Drawer
Intivo D Height Inner
Drawer for Boxcap Solid
Sides And Boxcover With
Frosted Glass Sides.
For M Height inner drawer order drawer
components as page 11 omitting the front
fixing brackets ZSF.3502, then add the M Height
inner drawer fronts.
For D Height inner drawers with Boxcap solid
sides or Boxcover with Frosted Glass, order
drawer components, as pages 12 or 13,
omitting the front fixing brackets ZSF.5220,
then add D height inner drawer fronts
including gallery.
M Height Inner Drawer Fronts for
Cutting to Size, 1036mm
D Height Inner Drawer Fronts
Front Fixing Bracket M Height
Z31L1036AW
White
ZIF.80M0W
White
Z31L1036AG
Grey
ZIF.80M0G
Grey
Z31L1036AI
Nickel
ZIF.80M0I
Nickel
Cross Gallery for Cutting to Size,
1046mm
14
ZRG.1046ZW
White
ZRG.1046ZG
Grey
ZRG.1046ZI
Nickel





Soft Closing
Standard Drawer 83mm
– M Height
2. Drawer sides & cover caps - left/right
Length
30kg
50kg
65kg
270mm 558.2701B
350mm 558.3501B
400mm 558.4001B
450mm 558.4501B
559.4501B
556.4501B
500mm 558.5001B
559.5001B
556.5001B
550mm 558.5501B
559.5501B
650mm
Length
Stainless
Steel
Metallic
Grey
270mm
358M2702I
358M2702S
350mm
358M3502I
358M3502S
400mm
358M4002I
358M4002S
450mm
358M4502I
358M4502S
500mm
358M5002I
358M5002S
550mm
358M5502I
650mm
358M6502I
Tandembox Standard Drawer – M Height

556.6501B
For inner drawer omit item 4 and add items
7a & 7b
Z30M000SN Nickel
7a. Inner drawer
front fixing brackets left/right
ZIF.70MO
Z30M000SG Grey
Ral 7037 dust grey
7b. Inner drawer front
ZSF.3502 Screw-on
Z31A1081G Grey
Z31A1081N Nickel
15
Tandembox Standard Drawer – B Height





Soft Closing
Standard Drawer + Low
Gallery 135mm – B Height
Length
30kg
50kg
65kg
450mm 558.4501B
559.4501B
556.4501B
500mm 558.5001B
559.5001B
556.5001B
550mm 558.5501B
559.5501B
400mm 558.4001B
650mm
556.6501B
Length
Stainless
Steel
Metallic
Grey
400mm
358M4002I
358M4002S
450mm
358M4502I
358M4502S
500mm
358M5002I
358M5002S
550mm
358M5502I
650mm
358M6502I
5. Lateral Gallery Rails left/right
Length
Chrome
400mm
Grey
ZRG.346VG
450mm
ZRG.396VC
ZRG.396VG
500mm
ZRG.446VC
ZRG.446VG
550mm
ZRG.496VC
650mm
ZRG.596VC
Z30B000SN Nickel
Z30B000SG Grey
For inner drawer omit item 4
7a. Inner gallery front bracket grey
ZIF.72BO
7b. Front section inner drawer
Z31A1081G Grey
ZSF.3502
Screw-on
Z41A1081N Nickel
16





Soft Closing
Standard Drawer + High
Gallery 199mm – D Height
Length
30kg
50kg
65kg
450mm
558.4501B
559.4501B
556.4501B
500mm
558.5001B
559.5001B
556.5001B
5. Lateral Gallery Rails left/right
Length
Chrome
Grey
450mm
ZRG.396VC
ZRG.396VG
500mm
ZRG.446VC
ZRG.446VG
Length
Stainless
Steel
Metallic
Grey
450mm
358M4502I
358M4502S
500mm
358M5002I
358M5002S
Z30D000SN
Nickel
Z30D000SG
Grey
Tandembox Standard Drawer – D Height

ZSF.3502 Screw-on
For inner drawer with handle omit item 4 and
add 8a, 8b, 8c and 8d
6. Twinwall Boxside left/right
Length
Chrome
Grey
450mm
Z37H418I
Z37H418S
500mm
Z37H468I
Z37H468S
14
8a. Grey Front Fix Bracket
ZIF.73DO
8b. Nickel 1081mm long
Z31A1081N
8b Metallic Grey 1081mm long
Z31A1081G
8c. Metallic Grey Handle
ZIF. 7008
8d. Cross Gallery Rail 1095mm Chrome
ZRG. 1094C
8d. Cross Gallery Rail 1095mm Grey
ZRG. 1094G
17
Tandembox Deep Drawers – K Height





Soft Closing

Deep Drawer 115mm
– K Height
Length
30kg
50kg
65kg
450mm 558.4501B
559.4501B
556.4501B
500mm 558.5001B
559.5001B
556.5001B
Z30K000SG Grey
ZSF.3502 Screw-on
2. Drawer sides & cover caps left/right
18
358K4502S 450mm
Metallic Grey
358K5002S 500mm
Metallic Grey
TIP-ON for Tandembox
2
3b
3c
3
1
5
TIP-ON for Tandembox
3b
TIP-ON for Tandembox for handle-less drawers
and pull-outs, to open with just a touch.
Suitable for up to 50 kg.
Easy tool free depth adjustment without
removing the drawer.
Optional Synchonisation unit for cabinet widths
of 550mm and higher.
Synchronisation Rod
(Optional) 550mm And Above
Z55.S135G
Synchronisation Rod Unit
600mm
Z55.S235G
800mm
Z55.S285G
900mm
Z55.S335G
1000mm
3c
1
L Bracket (Optional)
BP250
L Bracket
Attached in the centre for supporting the base
when using synchronisation.
5
TIP-ON For Tandembox
559.4501TL TIP-ON Tandembox Runner
450mm L/H
Front Stabilisation (Optional)
559.4501TR TIP-ON Tandembox Runner
450mm R/H
Z96.10E1
559.5001TL TIP-ON Tandembox Runner
500mm L/H
559.5001TR TIP-ON Tandembox Runner
500mm R/H
2
Attached in the centre for supporting the base
of heavy pull-outs.
Drilling Template
65.5050
Locking Mechanism Unit
Z55.5103L
TIP-ON Locking Device LH
Z55.5103R
TIP-ON Locking Device RH
3a
Synchronisation Unit (Optional)
550mm And Above
Z55.S0001
Drilling Template
Drilling template to pre-drill the fixing positions
for the locking mechanism and synchronisation
unit.
Servo-Drive
SERVO-DRIVE is an
electrical drive opening
support system for drawers
and pull-outs. By
combining this feature
with BLUMOTION, for
silent and effortless closing
action, we have created
new levels of motion
quality. For a complete list of components and
prices please contact our Customer Service
Department.
19
Movento
Movento Runner System
MOVENTO is available in a 40kg
and 60kg load bearing class. This
opens up numerous possibilities for
future design such as the use of
extra-wide, high and deep pull-outs.
This creates lots of storage space
that can be filled with heavy items.
New adjustment dimensions
With MOVENTO, the front can now
be adjusted to the side and in the
depth along with the height and
tilt. Depth adjustment is optional
for furniture with inset fronts. An
exact gap design can be achieved
quickly, easily and tool-free. In
addition, no drawer modification is
required.
1. Side adjustment - carried out via the locking device, a correction to the side
adjustment is carried out if required behind the runner
Movento Runner
Length
40Kg
60Kg
270mm
760H2700B
300mm
760H3000B
350mm
760H3500B
400mm
760H4000B
450mm
760H4500B
766H4500B
500mm
760H5000B
766H5000B
550mm
760H5500B
766H5500B
600mm
766H6000B
650mm
766H6500B
2. Height
Adjustment
Locking Device
T51.7601R
Locking Device RH
T51.7601L
Locking Device LH
3. Tilt Adjustment
Depth Adjustment (Optional)
298.7600
MOVENTO is also available in a
version with integrated Tip-On
function.
Please contact our Customer Service
Department for further details.
20
4. Depth Adjustment
Tandem Runners
Soft Closing
Tandem Runners Bottom
Mounted - Single extension
550H
Tandem Runners - Bottom mounted Single extension. 30kg dynamic load
550H2700B Tandem Runner - 270mm
Locking Device Left and Right - Orange
6g csk or 661.1150 system screw
min 22.5
20
32
9.5
12 - 15
37
internal drawer width =
internal carcase width - 42mm
drawer length =
nominal runner length - 10mm
Locking Device RH
T51.1700L
Locking Device LH
Loss of extension
270mm = 54mm
350mm = 54mm
400mm = 74mm
450mm = 74mm
500mm = 96mm
550mm = 96mm
max 16
10
4
T51.1700R
x
37
22
10
21
Tandem Runners
Tandem Runners
- Heavy duty
- Bottom mounted
- Full extension
Soft Closing
Tandem Runners
- Bottom mounted
- Full extension
560H
566H
Tandem Runners - Bottom mounted - Full
extension 30kg dynamic load
Tandem Runners – Bottom mounted full
extension. 50kg dynamic load
566H4500B Tandem Runners Heavy Duty - 450mm
566H5000B Tandem Runner Heavy Duty - 500mm
566H5500B Tandem Runner Heavy Duty - 550mm
37
25
37
9.5
12 - 15
max 16
10
min 27.5
4
internal drawer width =
internal carcase width - 42mm
drawer length =
nominal runner length - 10mm
22
32
x
37
22
10
T51.1700R
Locking Device RH
T51.1700L
Locking Device LH
Runners Left and Right Full Extension
560H2700C
270mm
560H3000C
300mm
560H3500C
350mm
560H4000C
400mm
560H4500C
450mm
560H5000C
500mm
3
TIP-ON for Tandem Runners
1
TIP-ON for Tandem Runners
for use with timber
drawers
l
Concealed TANDEM full extension. The
Tandem Runner system is designed for
loads up to 30kg.
l
The TIP-ON feature will perform best with
loads up to 20kg.
l
Maximum width of drawer 600mm.
Without synchronisation any drawer
above will require T55.889W and
T55.000R. See 6b and 6c below.
T51.1700R
Locking Device RH
T51.1700L
Locking Device LH
6a
TIP-ON Left / Right for handle-less fronts
Composed of: TIP-ON unit Left and Right,
latch Left and Right and depth
adjustment.
T55.7150
6b
l
TANDEM inside for unparalleled running
action for the lifetime of the furniture.
l
Tool-free height adjustment via a locking
device.
Synchronisation (optional) for cabinet
widths 600mm and higher
l
Tool-free integrated front tilt adjustment.
T55.000R
l
Built-in width and depth tolerance
compensation.
6c
T55.889W
TIP-ON Synchronisation Pinion Set
Synchronisation rod
889mm for cutting to size.
Cutting - internal cabinet width - 277mm
Maximum cabinet width 1200mm
23
Aventos HK – Stay Lift System
Aventos HK - Stay Lift System
Wooden fronts and wide aluminium frames
The Aventos HK lift system is suitable for low
cabinet heights for example top boxes.
1
Lift Mechanism Set
l
Cabinet height up to 600mm
l
Cabinet widths up to 1800mm
Cat Number
Power Factor
Opening Angle
l
Integrated BLUMOTION
20K2300
480 - 1500
107˚
l
Simple tool free assembly
20K2500
750 - 2500
107˚
l
Variable stop
20K2700
1500 - 4900
107˚
l
3 dimensional adjustments on the front.
20K2900
3200 - 9000
107˚
In order to select the correct lift mechanism
this is how its done Power factor = carcase height x door weight kg
(including handle).
ie 360mm carcase x 4.5kg door weight = 1620.
With a power factor of 1620 the lift mechanism
20K2500 should be used.
Please note maximum door weight 18kg.
3
Front Fixing Bracket Set
Wooden fronts and wide aluminium frames
20S4200
Use self tapping screws for wide aluminium
frames.
4
20K8000
24
Cover Cap
Cover Cap grey
Aventos HF – Bi-Fold System
Aventos HF Bi-Fold System
The new lift system fitting for perfect motion,
with its easy opening feature and integrated
BLUMOTION a Bi-fold lift system has never
been so smooth.
The Aventos HF is suitable for carcase widths up
to 1800mm and carcase heights from 400mm to
1040mm
With just four main
components Aventos is
simple to order
1. Lift Mechanism Set
2. Telescopic Arm Set
3. Aventos Hinge Pack
4. Cover Caps
The lift mechanism is available with three
different power factors. The power factor
required depends on the combined weight of
both doors (including the handle) and carcase
height.
This is how it’s done –
2 Telescopic Arm Set
Power factor = Carcase height x door weight Kg
(including the handles)
Cat No
Carcase Height
20F3200
480 - 570mm
20F3500
560 - 710mm
20F3800
700 - 900mm
20F3900
760 - 1040mm
ie 720mm carcase x 4.5kg door weight = 3.240
With a power factor of 3.240 the first lift
mechanism 20F2200 would be required.
1 Lift Mechanism Set
Cat No
Power Factor
20F2200
2.600 - 5.500
20F2500
5.350 - 10.150
20F2800
9.000 - 17.250
3 Aventos Hinge Pack
Cat No
Hinge Pack
78Z5500T11 Hinge Pack wooden doors
78Z550AT11 Hinge Pack aluminium
doors
4 Cover Cap
20F8000
Cover Cap grey
25
Aventos HS - Up and Over System
3
Front Fixing Bracket Set for Wooden
and wide Aluminium Frames
20S4200 Steel nickel plated
The Aventos up and over lift system ideal for
large-area single fronts.
l
l
l
l
l
l
l
Cabinet height 676 - 800mm
Cabinet width up to 1800mm
Variable lift mechanism
Variable stop
4
Cover Cap
20S8000
8
Cover Cap grey
Cross Stabiliser Rod Round For
Cutting To Size 1061mm Aluminium
20Q1061U
1
Lift Mechanism Set Cabinet Height
676 - 800mm
20S2G00
Lift mechanism
20S2H00
Lift mechanism
20S2I00
Lift mechanism
Use the following item for any
carcases above 1200mm wide
20Q091Z
Aluminium Cross Stabiliser
Rod
Composed of:1 x Connecting Piece
2
Lever Arm Set
20S3500
26
1 x Fixing
2 x Stabiliser Adaptor
2 x Cross Stabiliser Cover Cap
4
4
2
In order to select the correct lift
mechanism (see table)
l
l
l
l
Carcase height = 720mm
Weight of front including handle
= 4.5kg
Selection of lift mechanism
20S2G00
The more powerful lift
mechanism is recommended for
overlapping areas.
Cabinet Height
20S2G00
Weight kg
20S2H00
Weight kg
20S2I00
Weight kg
800
4.00.7.00
6.00-12.25
10.50-20.00
795
4.00-7.00
6.00-12.25
10.50-20.01
790
4.00-7.00
6.00-12.25
10.75-20.00
785
4.00-7.00
6.25-12.50
10.75-20.00
780
4.00-7.00
6.25-12.50
10.75-20.25
775
3.75-7.00
6.25-12.50
11.00-20.25
770
3.75-7.00
6.25-12.50
11.00-20.25
765
3.75-7.25
6.50-12.50
11.00-20.25
760
3.75-7.25
6.50-12.75
11.25-20.25
755
3.75-7.25
6.50-12.75
11.25-20.50
750
3.50-7.25
6.50-12.75
11.50-20.50
745
3.50-7.25
6.50-12.75
11.50-20.50
740
3.50-7.25
6.50-12.75
11.75-20.75
735
3.50-7.50
6.50-13.00
11.75-20.75
730
3.50-7.50
6.75-13.00
11.75-21.00
725
3.50-7.50
6.75-13.00
12.00-21.00
720
3.50-7.50
6.75-13.00
12.00-21.25
715
3.50-7.50
6.75-13.00
12.00-21.25
710
3.50-7.75
6.75-13.25
12.25-21.25
705
3.50-7.75
6.75-13.25
12.25-21.50
700
3.50-7.75
6.75-13.25
12.50-21.50
695
3.50-7.75
6.75-13.25
12.50-21.50
690
3.50-7.75
7.00-13.25
12.75-21.50
685
3.50-8.00
7.00-13.50
12.75-21.50
680
3.50-8.00
7.00-13.50
13.00-21.50
676
3.50-8.00
7.00-13.50
13.00-21.50
27
Aventos HL – Lift Up System
Aventos HL - Lift Up System
4
4
In order to select the correct lift mechanism, it
is necessary to establish both the cabinet
height and the weight of the front (including
the handle). We recommend the more
powerful lift mechanism for overlapping areas.
Weight of front including handle.
Cabinet Height (mm)
Lift
Mechanism
Set
350-399mm
400-550mm
450-580mm
20L3800
Weight kg
20L3900
Weight kg
Lever arm left/right
20L3200
Weight kg
20L3500
Weight kg
20L2100
1.25-4.25
1.25-2.50
20L2300
3.50-7.25
1.75-5.00
1.75-3.50
20L2500
6.50-12.00
4.25-9.00
2.75-6.75
2.00-5.25
20L2700
11.00-20.00
8.00-14.75
5.75-11.75
4.25-9.25
13.50-20.00
10.50-20.00
8.25-16.50
20L2900
28
300-349mm
l
l
l
l
l
l
l
Cabinet height 300 - 580mm
Cabinet width up to 1800mm
Variable lift mechanism
Variable stop
1
Lift Mechanism Set
In order to select the correct lift mechanism
see table on page 28
20L2100
Lift mechanism
20L2300
Lift mechanism
20L2500
Lift mechanism
20L2700
Lift mechanism
20L2900
Lift mechanism
3
Front Fixing Bracket Set For Wooden
And Wide Aluminium Frames
20S4200 Steel nickel plated
4
Cover Cap
20L8000
8
Cover Cap grey
Aventos HL – Lift Up System
The Aventos Lift Up System is ideal for
small area single fronts.
Oval Cross Stabiliser For Cutting To
Size 1061mm Aluminium
20Q1061UA Cross Stabiliser Rod
2
Lever Arm Set
Cat Number
Cabinet height
20L3200
300 - 349mm
20L3500
350 - 399mm
20L3800
400 - 550mm
20L3900
450 - 580mm
Connecting Piece Set For Cross Stabiliser
Use the following items for any carcase above
1200mm wide.
20Q091ZA
Composed of:
Lever arm left/right
Connecting piece
x1
2b.
Stabiliser adaptor oval
x2
Fixing
x1
2c.
Cross stabiliser cover cap oval
x2
Stabiliser adaptor
x2
Cross Stabiliser cover cap
x2
24
x 1 pr
Composed of:
2a.
29
Aventos HKS – Stay Lift System
Aventos HKS - Stay Lift System
Aventos HKS is suitable for bridging units or
small top boxes up to 400mm high and with a
maximum door weight of 6kg including handle.
l Integrated BLUMOTION
l Simple tool free assembly
l Variable stop
l 3 dimensional adjustments of the front.
l No hinges required.
20K2E01
Lift Mechanism. Maximum door weight 6kg
including the handle
20K4A01
Front Fixing Bracket Set
20K8A01
Cover Gap Grey
An Introduction to Servo-Drive for
Aventos
Lift systems open with just a slight touch - and
then close again with the press of a button. An
inspiring luxury you can use to impress your
customers, thanks to SERVO-DRIVE for
AVENTOS, our new electrical motion support
system.
Crafted Design
30
T: 024 7667 1600
F: 024 7669 1010
E: sales@burbidge.co.uk
Burnsall Road
Canley
Coventry
CV5 6BS
www.woodﬁt.com

Blum Brochure 2013

Transcription

Similar documents

Brochure SFBM.indd - Werkhuizen Hengelhoef Industrial Contracting

to now. - Kugel Komponents

Corrosion of Steel in Concrete

modern designs - Resene Paints

Trim-A-Brake II - Van Mark Products

Summer 2012 - Westport Squares

View T3 Single Shot Gas Tool And Fasteners Catalog

Summer 2012 - Steel Magnolias

ZZ572/720R - Crate Engine Depot

Utility vehicle range