glass wall

WORLD LEADER IN FLEXIBLE SPACE MANAGEMENT
GLASS WALL
MOVABLE PARTITIONS
Glass Wall
MOVABLE PARTITIONS
Hufcor glass walls are clearly visionary.
main image
Our movable glass partitions allow natural light to flood an interior
space while providing space flexibility. With your choice of clear
Color matched aluminum or timber panels can also be
used for acoustical separation as shown
at this meeting space in Texas.
insets (top to bottom)
Hufcor partitions easily & effectively close off the
narthex at the St. Joseph’s Catholic church in Maryland.
tempered, full satiny translucent, etched, or custom glass, our walls
can become the signature design element of your room. Satisfied
customers are using glass partitions to close off offices, storefronts,
restaurants, bank lobbies and library training centers, creating secure,
flexible spaces.
Wisconsin Center for Discovery installed frameless
glass walls to create large meeting areas open to the
building’s multi-story atrium.
A library uses a large Hufcor glass slider with custom
graphics to close the entrance to the children’s wing.
GLASS WALL PRODUCT SELECTOR
MODEL
1
CONFIG. SERIES #
TOP SEALS
FIXED
RETRACT
FLOOR SEALS
RETRACT
FIXED
VERT.
TRIM
MAX.
HEIGHTS
MAX.
OPENING
WIDTH
STC ACOUS.
RATINGS
1
2
Frameless
Paired
GL2
std
n/a
n/a
std
opt
10'5" [3.2m]
Unlimited
n/a
Frameless
Single
GL1
std
n/a
n/a
std
opt
10'5" [3.2m]
Unlimited
n/a
Timber-Framed
Paired
GT2
std
n/a
n/a
std
n/a
10'2" [3.1m]
Unlimited
n/a
Timber-Framed
Single
GT1
std
n/a
n/a
std
n/a
10'2" [3.1m]
Unlimited
n/a
Acoustically Rated Ultra
Paired
GA2
Acoustically Rated Ultra
Single
GA1
std
n/a
opt
std
std
12'2" [3.7m]
26 Panels
With 2 LCP
Panels
36, 45
Acoustically Rated Ultra
Paired
GA2
Acoustically Rated Ultra
Single
GA1
std
n/a
std
std
std
12'2" [3.7m]
26 Panels
With 2 LCP
Panels
46
Heights shown are standard. Contact your local Hufcor distributor for custom sizes.
2
n/a = not available
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
2
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
www.h u f cor .com
TIMBER FRAMED GLASS WALL
Glass WallTIMBER-FRAMED
main image
A major insurance headquarters uses Hufcor
timber-framed custom glass walls.
insets (left to right)
Hilton’s Hampton Inn lobby breakfast
area is divided by timber-framed glass
movable walls.
This Napa Valley restaurant uses raised
panel bottom sections to divide this small
banquet room with Hufcor timber-framed custom
glass walls.
Timber-Framed Glass Wall consists
of glass surrounded with a wood frame. Each wood frame is
composed of triple laminated solid wood top and bottom rails
and stiles that are constructed from custom made veneers. Solid
wood edges and an engineered wood core ensure sturdy, durable
construction. Choose wood frames made of oak, maple, cherry, or
Douglas fir. Frames may also be customized. The wood is stained
and finished with a matte coat of polyurethane with colors selected
from Hufcor’s standard color selector. Panels may be ordered as
single or paired panels. Single (or omni-directional) panels may
be used in alternate locations or stacked in a remote location.
­­­­Paired panels are a good choice when the partition goes from
wall-to-wall. Pivot panels allow access between rooms. Optional
in-line pass doors are available on single (omni) models. Panels
are shipped fully assembled.
VERTICAL SECTIONS
GT2 Paired .eps
GT1 Single .eps
1-3/8" [35]
1-3/8" [35]
EDGE-ACTIVATED
THROW BOLT
LOCATED
APPROX. 36" FROM
FINISHED FLOOR
1-3/4" [44]
1-3/4" [44]
STAINLESS STEEL DUST-PROOF
STRIKE PLATE/FLOOR PIN
1-3/8" [35]
GT1 Single
1-3/8" [35]
GT2 Paired
Footbolt engages in floor
receptacle to ensure
panel-to-panel
alignment and stability.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
www.h u f co r . c o m
3
Glass Wall
FRAMELESS GLASS WALL
FRAMELESS
main image
Wisconsin Center for Discovery installed frameless
glass walls to create large meeting areas open to the
building’s multi-story atrium.
insets (left to right)
Retailer and concession storefront glass wall systems,
including radius tracks, are all available from Hufcor.
Kohler’s Chicago showroom uses Hufcor frameless
systems at their Merchandise Mart entrance.
Frameless Glass Wall consists of glass panels
mechanically fastened to horizontal top and bottom rails. The glass
has polished edges and no vertical trim – although vertical trim
is an available option. Panels may be ordered as single or paired
panels. Single (or omni-directional) panels can be used in alternate
locations or stacked in a remote location. Paired panels are a
good choice when the partition goes from wall-to-wall. Pivot
panels allow access between rooms. Optional in-line pass doors
are available on single (omni) models. The standard horizontal rails
are of clear anodized aluminum but may be custom finished. Panels
are shipped fully assembled.
Leading restaurant chain, Buffalo Wild Wings features
a storefront frameless glass wall system.
GL2 VertModified
.eps
VERTICAL
SECTIONS
1 " [25]
1/2" [13]
NOTE: There will be a gap of 1/4"-1/2" [6-13] between the glass panels when they are in
place to prevent glass-to-glass contact. The gap varies due to glass industry tolerances.
FRAMELESS FEATURES
[13]
[44]
1 5/8" [40]
3/4" [19]
In-Line Pass Door
All panels are supplied
with concealed foot bolts
and interlocking mechanisms.
Footbolt engages in floor
receptacle to ensure
panel-to-panel alignment
and stability.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
4
GL2 Paired Panel
Shown with Standard
Horizontal Rail
GL1 Individual Panel
Shown with Optional
Stainless Steel Clad Rail
BIM REVIT FAMILIES NOW AVAILABLE
®
CONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR
ASSISTANCE OR VISIT www.hufcor.com/gl-bim
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
www.h u f cor .com
main image
When closed, Hufcor glass wall sliders feature the
Oklahoma State logo and secure the cafeteria.
insets (left to right)
Diageo Corporation’s Latin America headquarters
in Miami with a slidding glass door system.
Morris & Co. uses a pocket slider to close off
the gift shop at Fontainebleau Resort’s lobby.
Slider tracks can be used with Hufcor
timber-framed glass walls as well.
VERTICAL SECTIONS
Sliding Glass Walls Hufcor frameless and
3
8 " HANGER ROD(S)
(ROD LENGTH MAY VARY)
GL2 VertModified .eps
SUSPENSION PLATE,
BY HUFCOR (TYP.)
1/2" [13]
1 5/8" [40]
3/4" [19]
®
BIM REVIT FAMILIES NOW AVAILABLE
CONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR
ASSISTANCE OR VISIT www.hufcor.com/gl-bim
GL1S Slider
Shown with Standard
Horizontal Rail
VERIFY
1 " [25]
1
2 " GLASS
CLEAR-TEMPERED
(TYP.)
F.F. THICKNESS
Custom-designed for each opening, these door systems
eliminate floor tracks traditionally found with sliding pocket
doors. With Hufcor’s Unispan overhead support system,
these door systems can be designed to create “barn door” or
“pocket door” sliders up to 40' [12.2m] long without the need
for traditional overhead supports.
CONC. ANCHORS
BY OTHERS
CEILING HEIGHT FROM TOP OF CONC. SLAB
timber-framed glass walls make perfect sliding glass door
systems. Top hung to eliminate floor tracks, these systems
make convenient closures. Based on the track system and
design, the Hufcor sliding glass doors can stack exposed, some
within wall pockets and others with side-by-side telescoping
tracks.
SLIDING GLASS WALL
Glass WallSLIDING DOORS
GL1S
Type 46 Side-by-Side Track
Up to Five (5) Tracks Available
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
www.h u f co r . c o m
5
Glass Wall
ULTRA ACOUSTIC - GLASS WALL
ULTRA ACOUSTIC
◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)
◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)
◆ Acoustic Glass Wall Paired Panels - Tamarack Center - NATC (Rhinelander, WI)
GA-ULTRA ACOUSTIC GLASS WALL
HUFCOR "SMARTER" BIM REVIT
is Hufcor’s next generation of acoustically rated moveable
glass partition systems with sound ratings of STC 36, 45
and 46. The durable frame is of steel and aluminum and
is powder coated in a clear satin metallic finish.
can adjust minimum clearance dimensions to account for
accessories like pass doors and panic hardware with simple,
easy-to-use check boxes.
STC 45 and 46 models include enhanced 2” [51]
double-laminated sealed I.G. glass to achieve the ultimate
acoustical performance. The STC 46 bottom seal has
both retractable and sweep seals. The STC 36 model
include single pane tempered glass and comes with
sweep bottom seals and optional retractable seals.
All models are available as single panels or pairs with an
expanding jamb or hinged closure. Options include an
ADA compliant pass door with panic hardware, custom
colors, and more.
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
6
®
FAMILIES
®
BIM REVIT FAMILIES NOW AVAILABLE
CONTACT YOUR LOCAL HUFCOR DISTRIBUTOR FOR
ASSISTANCE OR VISIT hufcor.com/ga-ultra-bim.
glass wall
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
CLEARLY VISIONARY
www.h u f cor .com
ULTRA ACOUSTIC
Glass Wall
AVAILABLE OPTIONS FOR ACOUSTIC
GLASS WALL
1. Lever Closure Panel – An expanding jamb seals
the panels in the opening. When not in use, nothing
remains in the opening.
2.Inset Pass Doors – Enables access between rooms.
(ADA compliant)
3.Mullions – Allows for segmented faces.
5. Hinged Closure Panel – Enables access between rooms.
6.Mechanical Bottom Seal – Quick-set Hufcor seal
systems available. (Required for STC 46 & Optional for
STC 36 & 45.
VERTICAL SECTIONS (GA-ULTRA)
HUFCOR
HUFCOR
HUFCOR
HUFCOR
HUFCOR
HUFCOR
Sealed IG
Unit
Single Glass
GA1 (Omni Panel)
Single Glass - STC 36
GA2 (Paired Panels)
Single Glass - STC 36
GA1 (Omni Panel)
Sealed IG Unit - STC 45
Retractable Bottom Seal
Sealed IG
Unit
GA2 (Paired Panels)
Sealed IG Unit - STC 45
Bottom Sweeps
Optional Features - STC 36 & 45
Retractable Bottom Seal Or Bottom Sweeps
(1" or 2" Floor Clearance Available)
GA1 (Omni Panel)
Sealed IG Unit - STC 46
Retractable
Bottom Seal
GA2 (Paired Panels)
Sealed IG Unit - STC 46
Bottom Sweeps
Required Features - STC 46:
Retractable Bottom Seal & Sweeps
(1" or 2" Floor Clearance Available)
HORIZONTAL SECTIONS (GA-ULTRA)
ULTRA ACOUSTIC - GLASS WALL
4.Solid or Sound Absorptive Faces – Adjacent panels
can contain solid or acoustic absorptive materials.
Single Glass
GA1 (Omni Panel) & GA2 (Paired Panels)
Single Glass- STC 36 (Shown With Pass Door & Lever Closure Panel)
Sealed IG Unit
GA1 (Omni Panel) & GA2 (Paired Panels)
Sealed IG Unit - STC 45 / 46 (Shown With Pass Door & Lever Closure Panel)
Note: Metric dimensions in [ ] are in millimeters unless otherwise indicated.
FOR MORE INFORMATION OR TO CREATE YOUR OWN PRELIMINARY DRAWINGS VISIT
www.h u f co r . c o m
7
INNOVATION
main image
The Wit Hotel in Chicago uses custom acrylic
sheeting to divide a private area of their luxury hotel bar.
insets (top to bottom)
Art glass has been used successfully within Hufcor’s glass systems. Shown are
panels at the Georgia Aquarium using custom Meltdown glass sculpture.
3Form® Varia Ecoresin artistic sheets create stunning space dividers as shown
at Cooper’s Hawk restaurant. The Varia sheeting can be installed into any
Hufcor movable glass wall system.
Different laminated glass continues to be used within the Hufcor glass wall
systems. A leading healthcare company chose a custom yellow and white inner
layer for convenient writing surfaces.
Hufcor movable glass wall partitions
offer designers the full palette of material options to
create multipurpose interior spaces that pop. Here
are a few examples of different materials that can be
used within the full line of Hufcor glass wall products.
innovation
YOU GET MORE WITH HUFCOR
IT’S ALL
IN THE BOOK
WORLDWIDE HEADQUARTERS
PO Box 5591 / 2101 Kennedy Road, Janesville, WI 53547
Toll-Free: 800-542-2371, ext. 214 Telephone: 608-756-1241
Fax: 608-758-8253 E-mail: info@hufcor.com
www.hufcor.com
The Hufcor Commitment to Green
Manufacturing, Sustainability and LEED.
Hufcor is committed to being an industry leader when it comes to
protecting the environment by reducing pollutants and minimizing
our environmental impact on air, water and land. For over a decade
Hufcor has utilized a “Green” approach to manufacturing and energy
consumption and has increased the percentage of materials that we
recycle, reuse, repair, restock or return for salvage. Today the Hufcor
commitment and progress toward Green manufacturing is greater than
ever. We continue to develop standards that support various LEED
(Leadership in Energy and Environmental Design) points to assist the
achievement of LEED certification goals.
More details on all Hufcor
products are available in the
Architectural Product Manual.
Call your local rep today to
receive a complimentary copy.
Or visit www.hufcor.com to
sign-up for the interactive
digital version.
Hufcor has a program of continuous product
improvement. As a result, some products may be
modified from those represented in this catalog.
The quality systems of
Hufcor’s U.S. manufacturing
facilities are registered to
the ISO 9001 standards,
Hufcor Partition U.S. Patents:
2,861,6603,056,1933,223,1473,295,257
3,295,5883,450,1853,638,3763,755,968
3,783,9303,879,7993,042,9604,014,137
5,181,2965,230,1235,406,6765,481,834
5,564,7596,112,4666,167,9378,468,751
*USGBC and related logo is
a trademark owned by the
U.S. Green Building Council
and is used by permission.
F-2016GL HUFUP 5M 2/16 Printed in U.S.A.
Hufcor offers continuing
education programs for AIA
members. Contact your Hufcor
representative for details.