Four Generations - Steiner Tractor Parts

Transcription

5. International
View more pictures
& tractor stories in
our digital book!
Stories and photos submitted by folks like you!
Entire stories can be read at http://www.steinertractor.com/tractor-story-winners.html
"Four Generations - One Tractor"
farm 8 miles outside Arcadia.
over time the M gradually be-
He told of how it was the only
came too worn out to do much
tractor "in the country" and
useful work and was eventually
how the neighbors would line
replaced with a Farmall 706.
up along the hill sides to watch
By the time I went to college,
him plow. Of course, most of
Grandpa had put a buzz saw on
them were still using horses at
the M for occasionally sawing
that time so seeing how
firewood, otherwise the M just
y Grandpa Pete (1st
M
efficiently and quickly the
sat. Eventually Grandpa stopped
generation) bought this
M could plow was quite a
using it altogether and the M
1944 Farmall M brand new
spectacle. That Farmall M did
was left to sit in the machine
at Scheidegger Implement in
everything on the farm for 12
shed for about 15 years with no
Arcadia, Wisconsin. He told me
years from plowing, to chop-
use at all.
many times of how he was driv-
ping hay, to grinding feed and
ing through town and saw a pair
on and on.
Then I (3rd generation) acquired
a small "Farmette" outside Rock-
of M's being delivered to the
dealership. They were some of
When my Dad (2nd generation)
ford, IL which had about 8 acres
the first he had seen with rubber
took over the farm in 1980, the
of hay field. I asked Grandpa if I
tires. So he knew he had to have
good ol' Farmall M was still
could have the old M to use on
one and proceeded to buy it
being used to do quite a bit of
my Farmette and so started the
before it was unloaded from the
work from spreading manure
M's resurrection. In the spring
truck. From there it spent most
to hauling loads and running
of 2005 I put a new set of tires
of it's life on his 300 acre dairy
the silage blower. However,
on it and a few other miscella-
"Life Long Dream"
H
www.SteinerTractor.com>
Steiner Community>
Tractor Stories
neous things and then used it for
making hay for two years. Then I
decided that it was time to give
it a complete restoration. I just
barely got it finished by October
of 2007 and then loaded it on
the trailer and hauled it back
to Arcadia to surprise Grandpa
for his 90th birthday party. He
complemented me by saying
that he saw it look like that one
other time - the day he bought
it. After the party, I brought the
tractor back to my place and
continue to use it for all sorts of
tasks to this day without so much
as a hick-up. My 5 year old son
(4th generation) loves to go on
tractor rides with me on the old
M and he has a peddle tractor
and several toy tractors just like
it. One day the M will become
his and will hopefully live on for
generations to come.
Sean Motszko of Leaf River,
Illinois
tractor needed new
front hubs, rims and
aving caught the tractor restoring bug many years ago and
wheel bearings. The
restored a few tractors along the way I've always kept my eye out
steering box needed
for a Farmall AMD (Australian model M diesel). Not easy to find!
an overhaul, new ra-
I've always wanted this model since I was a little boy. My parents
diator belts, hoses and
bought me a model red Farmall to play with while I was in the
water pump all needed
hospital when I was 9 and they made me leave it there for the other
replacing along with
sick kids to play with. Ever since then I had always wanted that model
the seat, battery box,
Farmall.
brakes, rear wheel seals, lights and light bar and numerous other bits
and pieces. Hydraulics were added as well as 3pl and rear mud guards.
This tractor was advertised in our local International Harvester Club
The parts that were purchased from Steiner were the steering wheel,
magazine for sale at Cowell on the Australian Eyre Peninsula in South
the seat (in Aussie black), gauges, radiator cap, fuel tank cap, mud
Australia which is half way across Australia from where I live at Goul-
guards, belts, hoses, and brake linings. The tractor was sandblasted
burn New South Wales. Restorations began immediately as I was keen
and primed and considerable panel beating was needed, then painted
to have it finished for our local club rally that was in 3 months time. The
in 2pac red. New tires were fitted just in time for the rally and national
176
tractor trek! John Fife of Goulburn, New South Wales Australia
"Grandpa's Dream"
would be discussed
during their visit to
the farm.
Last spring my
Grandpa became very
ill and during one of
my visits he had a
talk with me about
W
hen I was a little girl, my
tractors, especially one tractor on
Grandpa, Estil Cartwright,
his property, a 1958 Farmall 350.
always had me on his tractor to
It was his dream to see the tractor
ride around the farm just to look
used and running like new again.
at the family property. During our
You could tell that in his mind, it
rides he would teach me lessons
was beautiful just like it was, but
of life, family, fishing, and tractors.
when I looked at it I saw a rusted
Anyone who knew my Grandpa
pile of metal that would take years
would know that at least one,
to make it look like new.
if not all, of these four subjects
In November 2010 my Grandpa
passed away. In February 2011
door, there it was, the dream that
I received a phone call from my
my Grandpa saw for years, a
Grandmother and she wanted
beautiful new tractor. I was
to sell the tractor because she
amazed that I could see my
had no use for it. I knew that my
reflection in the paint, that all of
Grandpa told me what he did for
the shiny new emblems were all in
a reason, I didn’t know why at the
place, and every little detail was
time, but I purchased the tractor
complete.
to have it restored. I didn’t know
This winter the tractor will be in
much about tractors when I pur-
a parade in our home town and it
chased it, but I certainly learned
will be pulling a wagon that was
fast when I started looking for
also restored by my father with all
parts for it. My husband has re-
of his grandchildren riding in it in
stored tractors before and I could
his memory. I know my Grandpa
tell when he looked at the tractor
would be proud of his dream
that he saw the same thing that
tractor and I am thankful to my
my Grandpa did…a dream tractor.
husband who worked so hard to
My husband, Darryl, worked day
finish it in such a short time. To
and night from February 2011 to
my Grandpa…here is your dream
April 2011 to refinish it. One day
tractor! Melissa Thompson of
after work I opened the garage
Lewisport, Kentucky
"A Part of Me Forever"
could my family! I was extremely
“Chey,
excited when we loaded my
This is from Papa and Mama. I want you to know I love you very much
tractor onto the trailer, and
and I am very proud of you. Go get your tractor. When you get on it
brought it home. Those last few
remember me & your Mama. We love you. Good Luck.”
hours had gone by really fast,
Cheyann Fletcher of New Richmond, Ohio
and I couldn’t believe what had
his was the letter my Grandpa gave to me, along with $1,500 to get
T
just happened. What were the
a tractor for my upcoming fourteenth birthday two years ago. This
chances of us finding my tractor
letter and the money really meant a lot to me, and I was really excited to
so close to home, after traveling
finally get my own tractor. It especially meant a lot because my Papa was
for hours so far away? The next
suffering from brain cancer, and I knew my tractor would be one of the
day, my Dad and I started clean-
last gifts from him.
ing off the tractor, and making
lists of what needed to be done,
One day we ran across one for sale on the border of Ohio and West Vir-
and what we had to buy. This
ginia that we thought might be worth going and looking at. There wasn’t
continued into the winter, and
a picture of it, and we knew there was a risk we would travel for
into the spring. With every part
nothing, but we had to have hope. When we finally saw the tractor we
we ordered, I knew we were one
had traveled so far to seen, we realized it wasn’t worth the trip. The
step closer to finishing my tractor. I couldn’t wait for my shiny red and
poor tractor was useless. They had left it outside and every single part
white 230 to be finished. But, while my tractor kept being worked on,
of it was rusted. On our way home, only about a half hour from my
my Papa kept getting sicker.
house, my Mom and I thought we had seen a 230 by a barn in someone’s
yard. My Dad didn’t believe us at first, but we all finally convinced him to
Unfortunately, last May, my Papa passed away due to his cancer, and
turn the truck around. We knew that the owners probably weren’t look-
it broke my heart. I had lost my best friend. But I had my tractor, and I
ing to sell it, but there was still a chance. We pulled into the people’s
knew I would always have my memories of him. He never got to see my
driveway, and sure enough, there was a Farmall 230 with a white grill sit-
tractor finished, but I know he would love it. My tractor now goes to
ting there. It was going to need work before showing it off at the tractor
various tractor shows over the summer, and is the only Farmall 230 we
shows, but I knew by Dad could restore it. My Dad found the owner, and
see. For the back of my seat, I had a sticker made that says, “In memory
asked if he was willing to sell it. The man called his father, the original
of my Papa” because that’s truly what my tractor is, a memory of my
buyer, and said yes, they would sell it. I couldn’t believe it, and neither
Papa. If it wasn’t for my Papa, I wouldn’t have my tractor.
177
International: Alphabetical Index
w w w. S t e i n e r Tr a c t o r. c o m
A
Air Cleaner Parts................ 238 - 239
caps..............................................238
clamps.................................238, 239
cups.................................... 238, 239
filter element..............................239
hose.............................................239
pipes............................................239
Air Cleaner Change Gauge..........210
Alternators & Parts............. 224 - 225
brackets / kits.................. 224 - 225
mounting kit..............................225
pulleys.........................................224
shield...........................................225
Amp Gauges..................................207
Axle Hub, Rear..............................272
C
Camshaft........................................189
gears........................................... 189
Cam Shifter Repair Kit................ 247
Caps........190, 191, 194, 202, 203, 204, .
........... 218, 219, 220, 241 - 242, 253
distributor..................218, 219, 220
fuel..................................... 241 - 242
oil fill / breather........................190
oil filter drain.............................191
power steering...........................253
radiator...................... 202, 203, 204
rain..............................................194
Carburetors & Parts............ 195 - 200
adjusting needle assy................196
bushing.......................................196
choke disc...................................197
choke lever................................ 195
B
elbows.........................................196
Battery Boxes....................... 212 - 215
fitting...........................................197
bolts.............................212, 213, 214
floats............................................198
bushings.................................... 214
float valve assy..........................197
bushing retainer........................214
gaskets........................................197
grommet.....................................214
idle tube......................................196
thumb screw..............................214
main jets......................................196
Battery Cables................................212
nozzles....................................... 196
Battery Clip....................................212
repair kits.......................... 198 - 200
Battery Covers...............213, 214, 215
throttle disc................................196
Battery Doors.................................214
throttle shafts............................ 197
Battery Trays..................................215
venturi........................................ 197
Belt Pulley Guard..........................269
Charge Indicator Gauge...............207
Belt Pulley Plates...........................248
Choke Cables.................................195
Blade Parts......................................278
Chrome Exhaust Stacks..... 194 - 195
bolt spacer..................................278
clamps.................................194, 195
connecting rod...........................278
raincaps.......................................194
extension arm............................278
Cigarette Lighters..........................216
lifting lever.................................278
Clamps............................................241
mounting plate..........................278
Cluster Gauges..............................209
Books...............................................280
Clutch Parts.......................... 245 - 247
Brake Parts........................... 262 - 265
alignment tool............................246
adjusting bolts...................264, 265
bearings......................................246
ball...............................................265
boot..............................................245
boots............................................263
bushings.....................................246
bands...........................................264
carriers........................................246
cover............................................262
discs.............................................246
discs.....................................264, 265
dust cover...................................245
drum............................................263
inspection plates........................245
lining set.................................... 264
kits.......................................245, 246
riveting tool................................264
pedal adaptor.............................247
seal...............................................263
pins......................................246, 247
set screw.....................................263
pressure plates...........................246
shafts...........................................263
release yoke................................246
springs................................263, 265
shafts...........................................245
Bull Pinions....................................266
springs........................................245
Bumper, Front Axle Rubber.........254
Coils........................216, 217, 255, 256
Crankcase Gasket......................... 190
178
C
Crankshaft & Parts........................190
gasket..........................................190
gear..............................................190
pulleys.........................................190
seals.............................................190
Cultivator Parts............................ 277
bolt / nut....................................277
lay off clamp..............................277
wedge..........................................277
Cylinder Head...............................188
D
Dash Lamp Lens............................226
Decals.................................... 278 - 279
Distributor Parts................. 216 - 219
bracket........................................216
caps......................................218, 219
clips & brackes...................218, 219
coils..................................... 216, 217
cover...................................218 , 219
distributor..................................218
drive gear...................................218
drive shaft..................................218
gasket..........................................219
ignition tune up kits.........218, 219
resistor........................................217
rotor buttons......................218, 219
spark plugs.................................217
spark plug wiring sets..............217
spark plug loom bracket..........217
tags..............................................219
terminal insulators....................218
terminal screw...........................218
washer.........................................218
Drag Link Parts................... 253 - 254
assys....................................253, 254
boots............................................254
ends.................................... 253, 254
Drawbars & Parts................ 275 - 276
bolt...............................................275
brace rods...................................276
clevis............................................276
hardware kit...............................275
lock..............................................275
pins..............................................276
retainer plate..............................276
roller shaft supports..................276
support........................................276
DVDs...............................................283
E
Electrical Outlet Socket................212
connector plug...........................212
Emblems / Badges............. 229 - 231
clips.....................................230, 231
Engine Gasket Sets.............. 187 - 188
Exhaust Elbows............ 184, 186, 187
Exhaust Extension Pipe................185
E
Exhaust Stacks.................... 194 - 195
clamps.................................194, 195
raincaps.......................................194
F
Fan Assemblies..............................205
Fan Belts............................... 205 - 206
Fenders & Parts................... 260 - 261
bolts.....................................260, 261
bushing.......................................260
extension kit / plates........260, 261
grommet.....................................261
mounting brackets....................261
Final Drive Axle Housings.265 - 266
gasket set....................................266
seals................................... 265 - 266
Fertilizer Hopper...........................278
Flange Bolts....................................236
Flywheels & Ring Gears...............192
Friction Discs, Throttle.................244
Front Axle Parts................... 254 - 255
axle molded bumper.................254
axle pins......................................255
axle wishbone............................254
center tube..................................254
pivot bolster.............................. 255
pivot bolster bracket.................254
pivot bolster pin........................255
Front Blade Parts...........................278
bolt spacer..................................278
connecting rod...........................278
extension arm............................278
lifting lever.................................278
mounting plate..........................278
Fuel Caps.............................. 241 - 242
gasket..........................................242
Fuel Filters..................................... 243
element.......................................243
Fuel Gauges.................................. 210
Fuel Lines.......................................242
Fuel Pump Repair Kits.................201
Fuel Sending Unit.........................209
Fuel Tank Parts..................... 241, 243
insulating pad............................241
mounting pad............................241
nut...............................................241
screen..........................................243
webbing......................................241
Fuse Holder....................................216
G
Gas Lever........................................244
disc............................................. 244
spring..........................................244
Gauges........... 207, 208, 209, 210, 211
air cleaner...................................210
amp..............................................207
charge indicator.........................207
cluster..........................................209
fuel pressure...............................210
STEINER Tractor Parts • Order today! M-F 8 am - 5 pm EST; Sat. 8 am - 12 pm
G
Gauges cont....207, 208, 209, 210, 211
instrument panel housings......210
oil pressure.................................208
tachometers...................... 210 - 211
touch control..............................209
water temperature.....................209
Gears...... 189, 190, 218, 247, 252, 267
camshaft gears...........................189
crankshaft gear..........................190
distributor drive gear...............218
hydraulic drive gear.................267
steering sector gears.................252
torque amplifier gear................247
transmission gears....................247
worm gear..................................247
Gear Shift Parts..............................248
boots............................................248
inserts..........................................248
knobs...........................................248
lever.............................................248
Generator Parts..............................223
band cover..................................223
belts.............................................223
pulley..........................................223
tags..............................................223
Glow Meter Plug...........................208
Glow Plug.......................................217
Governor & Parts..........................201
arm..............................................201
springs........................................201
Grab Handles.................................261
Grilles & Parts...................... 233 - 235
grille patch.................................233
grille screens......................233, 234
grille screen clips.......................233
headlight support panel...........234
inserts..........................................233
lower shell panel.......................234
screens.................................233, 234
screw...........................................233
spring..........................................233
support housing........................234
H
Handcranks.......................... 232 - 233
bracket....................................... 232
Headlights & Parts........227, 228, 289
brackets...............................228, 289
bulbs....................................227, 289
clamps.................................228, 289
gaskets........................................289
lens..............................................289
light bar.......................................228
light bar bolt set.........................228
reflector.......................................289
rings.....................................227, 289
set screw.....................................228
terminal.......................................289
washer.........................................289
H
Hoods & Parts.............. 229, 235 - 237
cage nut.......................................236
fastener.......................................236
fastener nut................................236
hardware kits.............................235
hood bolts...........................235, 236
hood extensions.........................236
ornaments...................................229
screw...........................................236
shields.........................................237
side panels........................ 236 - 237
wing nut.....................................235
Hoses & Clamps............204, 205, 241
Hydraulic Parts..................... 266 - 267
boot..............................................267
decal............................................267
dipstick.......................................266
fill plug........................................267
fill gasket....................................267
friction disc.................................267
gear..............................................267
knobs...........................................267
pump...........................................266
pump flanges.............................266
retainer clip................................267
rockshaft clevis pin...................267
rod spring...................................267
touch control stop.................... 267
I
Ignition Parts...................... 216 - 219
bracket........................................216
caps......................................218, 219
clips & brackes...................218, 219
coils..................................... 216, 217
cover...................................218 , 219
distributor..................................218
drive gear...................................218
drive shaft..................................218
gasket..........................................219
ignition tune up kits.........218, 219
resistor........................................217
rotor buttons......................218, 219
spark plugs.................................217
spark plug wiring sets..............217
spark plug loom bracket..........217
tags..............................................219
terminal insulators....................218
terminal screw...........................218
washer.........................................218
Instrument Panel Housings.........210
L
Lawn Spinner.................................282
Light Bar.........................................228
u-bolt set.....................................228
Light Brackets........................228, 289
Light Clamps.........................228, 289
L
Light Switches & Parts....... 225 - 226
bulb.............................................226
knobs...................................225, 226
push / pull switches.................226
resistors.......................................226
rotary switches................ 225 - 226
shift quadrant light...................226
M
Magneto & Parts.................. 219 - 220
caps......................................219, 220
condensors.........................219, 220
coils......................................219, 220
covers..................................219, 220
gaskets................................219, 220
insulator......................................220
manual....................................... 219
points..................................219, 220
rotors...................................219, 220
terminal screw...........................220
tune up kit..................................219
washer.........................................220
Manifolds & Parts............... 184 - 187
adaptor........................................186
clamps.........................................184
exhaust elbows..........184, 186, 187
exhaust pipes.............184, 185, 186
gaskets................184, 185, 186, 187
gasket material..........................187
pipe extension............................185
sleeve & donut...........................187
Manuals (I & T, Operator, Service)
........................................... 281 - 282
Mufflers................................ 193 - 194
clamps.........................................192
O
Oil Drain Plug................................191
gasket......................................... 191
Oil Filler Caps................................190
gasket..........................................191
Oil Filters.............................. 191 - 192
Oil Filter Drain Cap......................191
Oil Level Indicator........................191
Oil Pan Gaskets.............................191
Oil Pressure Gauges........... 208 - 209
bulb.............................................208
copper line kit............................209
fittings.........................................209
jewel lens...................................208
switch..........................................209
Oil Pump Drive Gear....................190
Outlet Socket..................................212
connector plug...........................212
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
P
Park Lock Assembly.....................247
Pedal Guards................................ 266
Power Steering Parts.................... 253
bolt...............................................253
brackets.......................................253
cap...............................................253
control valve..............................253
couplers......................................253
port blocks..................................253
pulleys.........................................253
pump...........................................253
torque generator........................253
PTO parts............................. 268 - 269
bearing kit..................................268
boot..............................................268
gaskets........................................268
knobs...........................................268
over-running clutches...............269
pto shaft......................................268
pto shields..................................269
seals................................... 268 - 269
shift collar...................................268
shift lever....................................268
shift lever guide.........................268
Pre-Cleaners & Parts........... 239 - 241
assemblies...................239, 240, 241
base..............................................240
bowls...........................................240
clip & springs kit.......................240
covers..........................................240
decal............................................241
dust jars..............................240, 241
gaskets................................240, 241
screens.........................................240
Pushrod Side Cover Gaskets.......189
R
Radiators & Parts................ 201 - 205
caps..............................202, 203, 204
clamps.........................................205
cores............................................201
core bolt & washer kit...............202
drain cap.....................................204
drain plugs.................................204
gaskets...................... 201, 202, 205
hoses............................................204
housing.......................................202
mounting pads..........................203
nut.......................................202, 203
pipe..............................................204
spring..................................202, 203
thermostats.................................205
Raincaps........................................ 194
Index continues on next page
179
S
Straight Stacks..................... 194 - 195
clamps.................................194, 195
raincaps.......................................194
R
Rear Axle Housings........... 265 - 266
gasket set....................................266
seals................................... 265 - 266
Rear Axle Hub...............................272
Rear Combo Lights...................... 228
Resistors..........................................217
Rims, Front & Rear..... 269, 270 - 274
bearing kit..................................271
bolts.......................... 270, 272 - 273
clamps.................................271, 273
nut.......................................272, 273
rear axle hub..............................272
reinforcing ring..........................274
seals.............................................270
stops............................................274
tubes....................................269, 273
valves..........................................273
washer.........................................273
S
Seats & Parts....................... 255 - 260
adjustment handle................... 258
assemblies..........................257 , 258
bearing........................................259
bolts.....................................256, 259
bolt spacer & tube assy.............259
bumper.......................................258
bushings.............................259, 260
bushing repair kit......................258
coils......................................255, 256
cushions......................................257
flip-back seats............................255
pins.............................255, 256 , 259
pivot support rods................... 260
retainer........................................256
seat frame...................................256
seat pads.....................................258
seat pans............................ 255, 256
shock absorbers.........................259
springs................................255, 256
support assy...............................255
support brackets........................255
support covers...........................258
support plates............................258
toolbox / support..................... 255
Sediment Bowl Assys. & Parts..........
........................................... 242 - 243
auxiliary filter............................243
bail assys............................ 242, 243
bowls...................................242, 243
element.......................................243
filters...........................................243
gaskets................................242, 243
screens.................................242, 243
Serial Numbers.................... 181 - 183
180
S
Serial Number Tags.......................232
rivets............................................232
Shift Quadrant Light.....................226
bulb.............................................226
Shift Lever Quadrant Covers......248
Shift Lever Repair Pin Kit............248
Side Panels........................... 236 - 237
fastener.......................................236
nut...............................................236
screw...........................................236
Spark Plugs....................................217
Spark Plug Wire Sets.................... 217
cable loom..................................217
Starters & Parts.................... 220 - 223
band covers................................221
drives..................................220, 221
ignition / key switches.. 222 - 223
keys.............................................223
knob.............................................222
lever.............................................221
manual starter switches...221, 222
pull rod.......................................221
push button switches................222
push / pull switches.................222
spring......................................... 220
starter solenoids........................221
tags..............................................221
terminal repair studs................221
Starter Hand Cranks........... 232 - 233
bracket........................................232
Steering Parts....................... 251 - 252
bolt & washer kit.......................252
dust cover...................................252
housing.......................................252
gaskets................................251, 252
nut...............................................252
seals.....................................251, 252
sector gears.................................252
set screws............................251, 252
shafts...........................................252
shaft support knuckles............ 251
universal joint............................252
Steering Wheels & Parts..... 249 - 251
caps..............................249, 250, 251
decal....................................249, 250
dust cover...................................250
gasket..........................................250
nuts..............................249, 250, 251
plate.............................................251
spinner........................................251
tilt cover..................................... 249
tilt adjustment lever..................250
tilt adjustment lever knob........250
Step Assemblies.............................262
T
3-Point Crank Arm........................277
3-Point Hitch Conversion............277
3-Point Link Latch Spring............277
Tachometers........................ 210 - 211
bracket........................................210
cables...........................................211
drive assy....................................210
gasket kit....................................210
Tail Lights & Parts................ 227, 228
bracket........................................228
bulbs............................227, 289, 291
clamps.........................................228
gaskets....................... 227, 289, 291
jewel lens................................... 289
knob.............................................289
lens..............................227, 289, 291
reflector.......................................289
rings............................ 227, 289, 291
switches..............................289, 291
terminal.......................................289
Thermostats................................... 205
gaskets........................................205
Throttle Assys & Parts....... 244 - 245
discs.............................................244
handle w/ plug.........................245
keyway........................................244
knob.............................................245
levers...........................................244
nut...............................................244
plate.............................................245
shaft.............................................245
springs........................................244
Tie Rod Parts........................ 253 - 254
assys....................................253, 254
boots............................................254
ends.................................... 253, 254
Timing Gear Cover Gasket..........190
Tires & Tubes..........................269, 273
nut.......................................272, 273
valves..........................................273
Toolboxes....................................... 262
bracket........................................262
decal............................................262
light bar.......................................262
toolbox & seat support.............262
u-bolt set.....................................262
Top-Links & Parts..........................277
bushing.......................................277
pins..............................................277
Torsion Shaft & Parts...................276
arms.............................................276
bolt...............................................276
shaft.............................................276
Touch Control Gauge....................209
T
Tractor Spinner..............................282
Transmission Parts...... 216, 247 - 248
block off plates...........................248
gears............................................247
park lock assy............................247
plug.............................................247
pressure switch..........................216
repair pin kit..............................248
seal...............................................247
shift cam detent.........................247
shift lever covers...................... 248
shift pattern plate......................247
U
U-joint, steering............................ 252
V
Valve Cover Gaskets.....................189
Valve Grind Gaskets.......... 188 - 189
Videos............................................ 283
Voltage Regulators........................224
conversion kit............................224
W
Warning Light Assys.....................228
bulbs............................................290
lens..............................................290
Water Drain Plugs.........................204
Water Jacket Covers..................... 206
gaskets........................................206
Water Pumps..................................206
packing gland nut.....................207
pulley drive studs.............206, 207
pulley flanges.....................206, 207
Water Temperature Gauges.........209
bracket........................................209
Wide Front Axle Rubber Bumper.....
.....................................................254
Wiring Harness Kits............ 215 - 216
Wiring Harness Grommet............216
Wheel Clamps / Nut.................. 271
Wheels, Front & Rear. 269, 270 - 274
bearing kit..................................271
bolts.......................... 270, 272 - 273
clamps.................................271, 273
nut.......................................272, 273
rear axle hub..............................272
reinforcing ring..........................274
seals.............................................270
stops............................................274
tubes....................................269, 273
valves..........................................273
washer.........................................273
Weights...................................272, 275
bolt kits.......................................272
front frame.................................272
front wheel.................................272
rear wheel...................................275
carriage bolts..............................275
Wittek Tower Clamps...................241
Except where
indicated the
serial number plate
is generally found on
left or right side of
transmission housing
or clutch housing.
INTERNATIONAL
HARVESTER &
FARMALL
Model I-130 & F-130
1956..........................501
1957........................1120
1958........................8363
Model I-140 & F-140
1958..........................501
1959........................2011
1960........................8082
1961...................... 11168
1962......................16637
1963......................21181
1964......................25387
1965......................28408
1966......................31285
1967......................34818
1968......................37352
1969......................39906
1970......................42300
1971......................44424
1972......................46605
1973......................48507
1974......................50720
1975......................54273
1976......................57773
1977......................60839
1978...................... 63111
1979......................64544
Model I-966 & F-966
1971........................7101
1972......................11815
1973......................17794
1974......................22526
1975......................28119
1976......................31772
Model I-1066 &
F-1066
1971........................7101
1972......................12677
1973......................24205
1974......................34949
1975......................46855
1976......................56672
Model I-1466 &
F-1466
1971........................7101
1972......................10408
1973......................15533
1974......................19746
1975......................25404
1976........................2951
Model I-1468 &
F-1468
1971........................7201
1972........................7239
1973........................9109
1974........................9670
Model I-1566 &
F-1566
1974........................7101
1975........................7837
1976......................12589
Model I-1568 &
F-1568
1974........................7201
1975........................7821
1975........................7975
Model 10-20
Gear Drive - KC
1923..........................501
1924........................7641
1925......................18869
1926......................37728
1927......................62824
1928......................89470
1929....................119823
1930.................... 159111
1931....................191486
1932....................201013
1934....................204239
1935....................206179
1936....................207275
1937....................210235
1938....................212425
1939....................214886
Model 10-20
Gear Drive - NC &
NT
1926..........................501
1927..........................649
1928..........................832
1929........................1155
1930........................1543
1931........................1750
1932........................1833
1933........................1912
1934........................1952
Cub serial number
name plate is located
on the right side of
the steering gear
housing.
Cub
1947..........................501
1948......................11348
1949......................57831
1950......................99536
1951....................121454
1952....................144455
1953....................162284
1954....................179412
1955....................186441
1956....................193658
1957....................198231
1958....................204389
1959....................211441
1960....................214974
1961....................217382
1962....................220038
1963....................221383
1964....................223453
1965....................225110
1966....................227209
1967....................229225
1968....................231005
1969....................232981
1970....................234868
1971....................236827
1972....................238506
1973....................240581
1974....................242746
1975....................245651
1976....................248618
1977....................250832
1978....................252109
1979....................253136
Cub Cadet
1961..........................590
1962......................23675
1963......................49846
1964......................73875
1965....................104307
1966....................137051
1968....................225056
1969....................280840
1970....................322858
1971....................373301
1972....................417643
1973....................457305
1974....................495749
1975....................536073
INTERNATIONAL
Model B-275
1959..........................501
1960........................1720
1961........................3415
Cub Lo-Boy serial
number name plate
is located on the right
side of the steering
gear housing.
Cub Lo-Boy
1955..........................501
1956........................2555
1957........................3929
1958........................6582
1959......................10567
1960......................12371
1961......................13904
1962......................15506
1963......................16440
1964......................17928
1965......................19406
International: Beginning serial numbers
1966......................21176
1967......................23115
1968......................24481
Cub 154 & 185
Lo-Boy serial number
on the top left front
side of the main
frame.
Cub 154 Lo-Boy
1968........................3505
1969........................3773
1970......................15502
1971......................20332
1972......................23343
1973......................27538
1974......................31766
Cub 185 Lo-Boy
1974......................37001
1975......................37316
Hydro 70
1973........................7501
1974........................7570
1975........................8681
1976......................10094
1962...................... 11141
1963......................12032
Model I-350
1956..........................501
1957........................1963
1958......................15049
Model IW-400
1954..........................501
1955..........................510
1956........................2187
Model I-404 & 2404
1961..........................501
1962........................1045
1963........................4205
1964........................6452
1965........................8292
1966........................9548
1967......................10534
1968......................11032
Model I-424
1964..........................501
1965........................1402
1966........................7841
1967......................13627
Hydro 100
1973........................7501
1974........................7727
1975......................10915
1976......................12434
Model I-444
1967..........................501
1968........................1190
1969........................5720
1970........................9010
1971......................12357
Model I-100
1954..........................501
1955........................1720
1956......................12895
Model IW-450
1956..........................501
1957..........................568
1958........................1662
Model I-240
1958..........................501
1959........................1777
1960........................3415
1961........................3989
1962........................4562
Model I-454
1970..........................501
1971..........................508
1972........................4908
1973........................8064
Model I-460
1958..........................501
1959........................2711
1960........................6883
1961........................9420
1962......................11619
1963......................11898
Model I-300U
1955..........................501
1956......................30219
Model I-330
1957..........................501
1958........................1488
Model I-340
1958..........................501
1959........................2467
1960........................5741
1961........................8736
Model I-464
1973....................100003
1974....................102196
1975....................104775
1976....................107128
1977....................108636
1978....................110479
Model I-504 & 2504
1961..........................501
1962..........................512
1963........................3376
1964........................6797
1965......................10996
1966......................14695
1967......................17992
1968......................20392
Model I-544 & 2544
1968......................10250
1969......................12699
1970......................14589
1971......................16018
1972......................16838
1973......................17341
Model I-560
1958..........................501
1959........................1210
1960........................3103
1961........................4032
1962........................4944
1963........................5598
Model I-574
1970..........................329
1971..........................350
1972..........................504
1973........................7074
1974....................102961
1975....................107880
1976.................... 111783
1977....................114195
1978....................117065
Model I-600
1956..........................501
1957........................1986
Model I-606 & 2606
1961..........................501
1962..........................503
1963........................1702
1964........................3214
1965........................5041
1966........................6960
1967........................7922
Model I-650
1956..........................501
1957..........................688
1958......................11659
181
Model I-656 & 2656
1965........................8501
1966......................15505
1967......................24372
1968......................32007
1969......................38861
1970......................42518
1971......................45497
1972......................47951
Model I-660
1959..........................501
1960........................3398
1961........................4259
1962........................5883
1963........................6995
Model I-664
1972........................2501
1973........................3212
1974........................3824
Model I-666
1972........................7500
1973........................8200
1974......................11585
1975......................13131
1976......................15739
Model I-674
1973....................100001
1974....................101862
1975....................103172
1976....................105946
1977....................107639
1978....................110254
Model I-706 & 2706
1963..........................501
1964........................7073
1965......................21162
1966......................30288
1967......................38521
Model I-756 & 2756
1967........................7501
1968........................7672
1969........................8164
1970........................8424
1971........................8427
Model I-766
1971........................7101
1972........................7416
1973........................9611
1974......................12378
1975......................14360
1976......................16840
Model I-806 & 2806
1963..........................501
1964........................4709
182
1965......................15946
1966......................24038
1967......................34943
Model I-826 & 2826
1969........................7501
1970........................8153
1971......................16352
Model I-1026 & 21026
1970........................7501
1971........................9707
Model I-1456 & 21456
1969......................10001
1970......................10025
1971......................10249
Model I-4100
1966........................8001
1967........................8723
1968........................8986
Model I-4156
1969........................9219
1970........................9365
Model I-4166
1972......................10001
1973......................10769
1974......................11256
1975......................11684
1976......................12200
4366 & 4568 serial
number name plate
is located on the left
side on top step.
Model I-4366
1973........................7501
1974........................7780
1975........................8616
1976......................10227
Model I-4568
1975........................8001
1976........................8368
FARMALL
Model 100
1954..........................501
1955........................1720
1956......................12895
Model 130
1956..........................501
1957........................1120
1958........................8363
Model 140
1958..........................501
1959........................2011
1960........................8082
1961...................... 11168
1962......................16637
1963......................21181
1964......................25387
1965......................28408
1966......................31285
1967......................34818
1968......................37352
1969......................39906
1970......................42300
1971......................44424
1972......................46605
1973......................48507
1974......................50720
1975......................54273
Model 200
1954..........................501
1955........................1032
1956......................10904
Model 230
1956..........................501
1957..........................815
1958........................6827
Model 240
1958..........................501
1959........................1777
1960........................3415
1961........................3989
1962........................4562
Model 300
1954..........................501
1955........................1779
1956......................23224
Model 340
1958..........................501
1959........................2723
1960........................5411
1961........................6642
1962........................7276
1963........................7699
Model 350
1956..........................501
1957........................1030
1958......................14674
Model 400
1954..........................501
1955........................2588
1956......................29065
Model 404
1961..........................501
1962..........................826
1963........................1936
1964........................2259
1965........................2568
1966........................2790
1967........................2980
1968........................3170
Model 450
1956..........................501
1957........................1734
1958......................22305
Model 460
1958..........................501
1959........................4765
1960......................16902
1961......................22622
1962......................28029
1963......................31552
Model 504
1961..........................501
1962..........................810
1963........................7000
1964........................7732
1965......................10696
1966......................13596
1967......................15113
1968......................16115
Model 544
1968......................10250
1969......................12541
1970......................13585
1971......................14507
1972......................15262
1973......................15738
1965......................21162
1966......................30288
1967......................38521
Model 756
1967........................7501
1968........................9940
1969......................14125
1970......................17832
1971......................18374
Model 766
1971........................7101
1972........................7416
1973........................9611
1974......................12378
1975......................14360
1976......................16840
Model 806
1963..........................501
1964........................4709
1965......................15946
1966......................24038
1967......................34943
Model 826
1969........................7501
1970........................8153
1971......................16352
Model 856
1967........................7501
1968........................9854
1969......................19554
1970......................28693
1971......................32420
Model 560
1958..........................501
1959........................7341
1960......................26914
1961......................36125
1962......................47798
1963......................60278
Model 966
1971........................7101
1972......................11815
1973......................17794
1974......................22526
1975......................28119
1976......................31772
Model 656
1965........................8501
1966......................15505
1967......................24372
1968......................32007
1969......................38861
1970......................42518
1971......................45497
1972......................47951
Model 1026
1970........................7501
1971........................9707
Model 666
1972........................7500
1973........................8200
1974......................11585
1975......................13131
1976......................15739
Model 706
1963..........................501
1964........................7073
Model 1066
1971........................7101
1972......................12677
1973......................24205
1974......................34949
1975......................46855
1976......................56672
Model 1206
1965........................7501
1966........................8626
1967......................12731
Model 1256
1967........................7501
1968........................8849
1969......................13140
Model 1456
1969......................10001
1970......................10405
1971......................14149
Model 1466
1971........................7101
1972......................10408
1973......................15533
1974......................19746
1975......................25404
1976......................29516
Model 1468
1971........................7201
1972........................7239
1973........................9109
1974........................9670
Model 1566
1974........................7101
1975........................7837
Model 1568
1974........................7201
1975........................7821
Farmall A, AV, B, BN
serial number plate
side of seat support.
Model A, AV, B & BN
1939..........................501
1940........................6744
1941......................41500
1942......................80739
1944......................96390
1945....................113218
1946....................146700
Note: Farmall A had
two serial numbers
in 1947, depending
on where tractor was
made:
1947 (Chicago)..182964
1947 (Louisville)..........
200001
Farmall Super A
serial number is
located on toolbox &
seat support.
Model Super A
1947....................250001
1948....................250082
1949....................268196
1950....................281269
1951....................300126
1952....................324470
1953....................336880
1954....................353348
Model C
1948..........................501
1949......................22624
1950......................47010
1951......................71880
Model Super C
1951....................100001
1952....................131157
1953....................159130
1954....................187788
Model F-12
1932..........................501
1933..........................526
1934........................4881
1935......................17411
1936......................48660
1937......................81837
1938....................117518
Model F-14
1938....................124000
1939....................139607
Model F-20
1932.............. 501 - 3000
1933............ 3001 - 6381
1934................................
....... TA135000 - 135661
1935.......... 6381 - 32715
1936........ 32716 - 68748
1937...... 68749 - 105596
1938....... 105597 - 130864
1939....... 130865 - 134699
1940....... 135700 - 148810
Model F-30
1932.............. 501 - 1183
1933............ 1184 - 4304
1934............ 4305 - 5525
1935............ 5526 - 7031
1936.......... 7032 - 10406
1937........ 10407 - 18683
1938........ 18684 - 26848
1939........ 27186 - 28719
1940........ 29007 - 30026
Model H & HV
serial number plate
hand clutch housing.
Model H & HV
1939..........................501
1940......................10653
1941......................52387
1942......................93237
1943....................122590
1944....................150251
1945....................186123
1946....................214820
1947....................241143
1948....................268991
1949....................300876
1950....................327975
1951....................351923
1952....................375861
1953....................390500
Model Super H & HV
1953..........................501
1954......................22202
Model M, MD, MDV
& MV
1939..........................501
1940........................7240
1941......................25371
1942......................50988
1943......................60011
1944......................67424
1945......................88085
1946....................105564
1947....................122823
1948....................151708
1949....................180514
1950....................213579
1951....................247518
1952....................290923
Model M, MD,
MDV, MTA & MV
serial number plate
hand clutch housing.
Model Super M, MD,
MDV, MTA & MV
1952....................... F501
1952 (Louisville)...........
L500001
1953................... F12516
1953 (Louisville)...........
L501906
1954................... F51977
1954 (Louisville)...........
512541
Regular & Fairway
1924..........................501
1925..........................701
1926........................1539
1927........................5969
1928......................15471
1929......................40370
1930......................75691
1931....................117784
1932....................131872
Model T-20
1931..........................501
1932..........................551
1933........................2053
1934........................2528
1935........................3276
1936........................5387
1937........................8501
1938......................12518
1939......................14550
Model TD-40
1934........................2501
1935........................2785
1936........................4393
1938........................7719
1939........................8599
McCORMICK
O-4, OS-4, W4, I4
& Super W-4 serial
number plate is
located on the left
side of transmission
housing.
Model O-4, OS-4,
W-4, I4
1940..........................501
1941..........................943
1942........................4056
1943........................5693
1944........................7593
1945...................... 11171
1946......................13934
1947......................16022
1948......................18880
1949......................21912
1950......................24470
1951......................28167
1952......................31214
1953......................33067
Model Super W4
1953..........................501
1954........................2668
Model I-6, ID-6, I-9,
ID-9 serial number
on left side of the
clutch compartment
cover.
Model I-6 & ID-6
1940..........................501
1941........................1225
1942........................3718
1943........................5057
1944........................6371
1945........................9518
1946......................14198
1947......................17317
1948......................24021
1949......................28868
1950......................35472
1951......................38518
1952......................44318
1953......................45274
Model O-6, ODS-6,
OS-6, W-6 & WD-6
serial number plate
is located on the
left side of clutch
compartment cover.
Model O-6, OS-6,
OD-6, W-6 & WD-6
1940..........................501
1941........................1225
1942........................3718
1943........................5057
1944........................6313
1945........................9496
1946......................14153
1947......................17792
1948......................22981
1949......................28704
1950......................33698
1951......................38518
1952......................44318
1953......................45274
Model W-9 & WD-9
serial number plate
is located on the
left side of clutch
compartment cover.
Model W-9, WD-9,
WDR-9 & WR-9
1940..........................501
1941..........................578
1942........................2993
1943........................3651
1944........................5394
1945......................11459
1946......................17289
1947......................22714
1948......................29207
1949......................36159
1950......................45551
1951......................51739
1952......................59407
1953......................64014
1954......................67969
Model I-9 & ID-9
1940..........................501
1941..........................578
1942........................3003
1943........................3651
1944........................5501
1945......................11459
1946......................17294
1947......................22715
1948......................29207
1949......................36350
1950......................45689
1951......................51739
1952......................59407
1953......................64014
Super W-6, W-6TA &
WD-6 serial number
plate is located
on the left side of
transmission
housing.
Model Super W6,
W-6TA & WD-6
1952..........................501
1953........................2908
1954........................8997
Model Super WD9
& WDR-9
1953..........................501
1954........................1935
1955........................5232
1956........................6864
Model WR-9-S
1953..........................501
1954..........................550
1955..........................722
1956..........................755
Model W-30
1932..........................501
1933..........................522
1934..........................548
1935........................3182
1936........................9723
1937......................15095
1938......................23834
1939......................29922
1940......................32482
Model W-40, WD-40
1935..........................501
1936........................1441
1937........................5120
1938........................7665
1939........................9756
1940......................10323
Model 15-30
Gear Drive
(Prefix "TG")
1921..........................112
1922..........................311
1923........................1661
1924........................6547
1925......................13868
1926......................26846
1927......................48647
1928........ 64401 - 99925
Model Late 15-30,
22-36
1929......................99926
1930....................128237
1931....................150128
1932.... 154508 - 156212
1934.... 156301 - 157477
McCORMICK
DEERING
Model O-12, O-14
& Fairway 12 & 14
1934..........................512
1935........................1092
1936........................1626
1937........................2277
1938........................3261
1939........................3882
Model W-12
1934..........................503
1935........................1356
1936........................2031
1937........................2768
1938........................3799
Model W-14
1938........................4134
1939........................4610
183
International: Engine parts
Manifolds, parts cont...
Order #
www.SteinerTractor.com
Engine overhaul kits
Inframe or out of frame kits are available by special order for Cub, A, B, C, H, M,
MTA & Supers (gas only) 100 thru 7488.
For price and availability call or visit Special Order Parts under Shop Online
on our website.
IHS961
IHS145
IHS145GK
IHS633
IHS1223
IHS1227
IHS153
Price
$86.50
$79.50
$8.55
$14.95
$48.95
$9.95
$203.30
IHS153GK
$7.50
IHS808
$34.95
184
$249.95
IHS136GK
$22.75
IHS003EXP $12.50
Manifolds, parts
Order #
Price
IHS136
Description / Application
Manifold
Fits: Farmall Cub up to SN: 248124 w/
engine up to SN: 312389; IH Cub Lo-Boy
(1955-68) (All w/ IHC carburetor)
Replaces: 251232R1
Manifold
Fits: Cub SN: 248124 & up, 154, 184, 185
(All w/ Zenith carburetor)
Replaces: 251232R1, 405023R2
NOTE: Will also fit older Cubs when
converting to Zenith carburetors.
Gasket Set
Fits: Same as IHS961, IHS145
Replaces: 251233R1,R2, 352540R92,
251235R1 (carb gasket)
Vertical Exhaust Pipe
Replaces: 350960R1
(1.304" O.D., 17" long) USA made
IHS139
Manifold
Fits: F20 & T20 Crawler using
gas style manifold IHS136
Replaces: HF122L
Gasket Set
Fits: Same as IHS136
Replaces: 10378D, 21250D, 19906D (carb)
Exhaust Pipe
$195.95
Manifold w/ Adpator
Fits: F30, W30 gas
Replaces: 5167D, 5168D
IHS139GK
$31.40
IHS1621
$29.95
IHS001
$129.95
Gasket Set
Replaces: 10413DA , 19906D (carb gasket)
NEW! Threaded Exhaust Pipe
NOTE: Customer must cut pipe to
length.
Manifold w/ IHS001EXP Pipe
Fits: A, B, C & Supers, 100, 130, 200, 230
Replaces: 251175R1, R11, R21
NEW! Exhaust Pipe Elbow
(For Underslung Exhaust)
Fits: Cub, Cub Lo-Boy
Replaces: 362359R1
IHS001EXP $10.95
NEW! Exhaust Manifold Clamp
(For Underslung Exhaust)
Replaces: 362359R1
IHS001GK
$6.95
IHS1238
$154.90
Exhaust Pipe only
Manifold
Fits: F12, F14, I12, I14, O12, O14, W12, W14
gas, Replaces: 3197D, 3196D
Gasket
Replaces: 24519DA
Stock Gas Manifold
Fits: H, I4, W4
Replaces: 8033DCY, 8033DCX
IHS295
NEW! Exhaust Pipe w/ Flange
Replaces: 41486DA, 41486DX
(9-1/4" o/a length, 2-3/4" c.c. bolt hole)
Gasket Set
Replaces: 352014R1
$185.00
High Performance Propane Manifold
Fits: H, I4, W4
NOTE: Increases horsepower of your gas
tractor.
Order #
IHS002GK
Price
$7.80
IHS003EXP $12.50
IHS1241
IHS1244
IHS002GK
$154.90
$185.00
$7.80
IHS003EXP $12.50
IHS779
IHS003B
$70.75
$178.90
IHS003EXP $12.50
IHS659
IHS003GK
$245.00
$7.25
Gasket Set
Replaces: 45197DD (gasket); 24520D (H
carb gasket); 21632D (300 carb gasket)
(2-3/8" c.c. carb holes, 5/16" stud dia.)
Order #
Price
IHS845
$49.95
Exhaust Manifold Pipe Extension
Fits the following diesels w/ 4-cylinder:
MD, Super MD, Super MTA-D, ID6, TD6,
WD6, ODS6, 400, 450, W400, W450
Replaces: 8328D
(2-3/8" O.D.; 6-7/8" o/a length)
IHS191
$140.00
Manifold (Threaded)
Fits: 140, 240, 330, 340, 404, 424, 444, 2404,
2424, 2444, T4, T5, T340 & 500 Crawlers,
C-123, C-135, C-146, C-153
(Round Intake • Square Exhaust ports)
Replaces: 369645R22, 388584R21
Exhaust Pipe
Stock Gas Manifold
Fits the following gas, LP: Super H, 300,
350 Rowcrops
Replaces: 362536R21
High Performance Propane Manifold
Fits the following gas, LP: Super H, 300,
350 Rowcrops, Replaces: 363788R11
NOTE: Increases horsepower of your gas
tractor.
Gasket Set
Replaces: 45197DD (gasket); 24520D (H
carb gasket); 21632D (300 carb gasket)
(2-11/16" c.c. carb holes, 3/8" stud dia.)
IHS001EXP $10.95
IHS191GK
$11.95
IHS567
$75.00
Gas Manifold w/ Exhaust Pipe
Fits: M, Super M, MTA, I6, T6, W6,
Super W6, 400, W400, 450,W450 gas;
Serviceable for OS6
Replaces: 8035DDX, 362437R21
Exhaust Pipe only
Fits: Sames as IHS003B
LP Manifold
Fits: M, Super M, MTA, I6, T6, W6,
Super W6, 400, W400, 450,W450 gas;
Serviceable for OS6
Replaces: 358308R11
NOTE: 1-piece like the OEM IH
manifold. Will increase horsepower on
gas tractors.
Exhaust Pipe
Gasket Set
Replaces: 352014R2 (manifold gasket),
25520D (carb gasket)
Exhaust Elbow
Fits: 300 Utility gas & 350 Utility gas
Replaces: 362298R1
Exhaust Pipe
Exhaust Pipe (2-Bolt Flanged)
Fits the following w/ distillate manifolds:
H, HV, W4, I4, Super H, Super HV, Super
W4, Replaces: 6713D
(5" c.c. bolt holes)
IHS796
$10.75
Exhaust Elbow Gasket
(For IHS567)
Replaces: 362299R1, 1349062C1
NOTE: 3 gaskets used for each manifold
(6 per engine).
IHS214
$75.95
Exhaust Manifold, Diesel
Fits following w/ BD144, BD154 in3
diesels: B250, B275, 276, 354, 364, 384, B414,
424, 434, 444, 2300A, 2424, 3414, 3444,
7000 Forklift, TD5 Dozer
Replaces: 704163R21, 703874R1,
3042719R11, 3045354R11
IHS935
$21.30
Extension Pipe
Fits: Same as IHS214; Will also fit 444, 2444
if pipe is lengthened.
Replaces: 704614R1, 3072544R1, 704613R1
(1-55/64" O.D., 5.600" o/a length,
3.225" c.c. bolt pattern)
IHS214GK
$9.75
Gasket Set
Fits: Same as IHS003B, IHS659
Replaces:46173DC, 21632D (carb gasket);
530681R2 (carb gasket)
Gasket Set
Replaces: 704165R2
Manifold parts continue on next page
185
Order #
IHS154
(Intake)
Order #
IHS137
IHS137GK
Price
$168.75
Manifold
Fits: Some 454, 464, 574, 674, 2400A,
2400B, 2405B, 2410B, 2412B, 2500A, 2500B,
2505B, 2510B, 2514B, 3400A, 3500A
w/ C-157, C-175, C-200 in3 vertical exhaust
Replaces: 406046R1
NOTE: Exhaust pipe is offset not
centered.
IHS004
(Exhaust)
Price
Manifold
Fits the following gas: 666, 686, 706,
756, 766, 806, 826, 856; Hydros: 70, 86;
Will also fit following w/ gas by
purchasing IHS1236 Adaptor: 460, 560,
606, 656, 660
IHS154 Replaces: 367261R11
$189.30
IHS004 Replaces: 358976R31, 384290R1,
390988R1
NOTE: IHS154 (Intake) is not assembled.
Customer must assemble manifold heat
control valve.
$144.95
IHS138GK
$8.55
IHS138ELB
$29.95
$38.50
Manifold
Fits: 504, 2504 & some 3514 w/ C-153 gas
engine vertical & horizontal exhaust
Replaces: 377179R11
IHS004GK
$24.65
Gasket Set
Replaces: 352014R2, 31336D, 530681R2
(carb gasket)
IHS1619
$24.95
NEW! Threaded Exaust Pipe
Fits the following gas, LP, diesel: F460,
F560, 656; Gas, LP: 544, 606;
D282 diesel: 660, 706
Replaces: 366780R1, 369613R1, 370643R1
(2" x 17-3/4" long)
NOTE: Must use IHS1236 adaptor if
purchasing IHS004 manifold.
IHS1621
$29.95
NEW! Threaded Exhaust Pipe
Fits the following gas, LP: 666, 686, 706,
756, 806; Diesels: 806, 856; Hydros: 70, 86
Serviceable for the following gas, LP when
using STP #IHS004 exhaust manifold w/
out IHS1236 adaptor: 460, 560, 606, 656,
660, Replaces: 383974R2
(2-1/2" x 18" long)
NOTE: Customer must cut pipe to length.
IHS932
$182.50
Exhaust Elbow
Replaces: 377947R1
IHS140
$205.85
Manifold
Fits: I9, T9, U9, W9, WR9, 600, 650 gas
Replaces: 8321DBX
IHS140GK
$33.15
Gasket Set
Replaces: 52755DA, 31336D (carb gasket)
186
Offset Exhaust Manifold Adaptor
Fits the following gas: 460, 560, 606, 656,
660, 2606; Cotton pickers: 414, 416, 420,
422 IH C-221, C-263 & C282 gas motors
(2" NPT adaptor to fit IHS004)
NOTE: Use w/ IHS004 Exhaust Manifold.
IHS1236
$18.65
Gasket Set
IHS138
$205.75
Gasket Set
Replaces: 400878R1,R2, 85868R1,R2,
530681R1,R2 (carb gasket)
Exhaust Manifold Center Section
Fits the following naturally aspirated
diesels: 806, 856, 2806, 2856; Combine:
Early 815 (w/ D361 or D407 series engines)
Replaces: 326699R1
Order #
IHS930
Price
$130.00
IHS1634
$21.95
IHS929
$224.95
IHS1634
Rear Exhaust Manifold
Fits: 966, 986, 1066, 1086, 1466, 1486, 1566,
1586, 3388, 3488, 3588, 3688, 3788, 4166,
4186, 4366, 4386, 5088, 5288, 5488, 6388,
6588, 6788, 7288, 7488, Hydro 100, Hydro
186, 815, 915, 1440, 1460, 1470, 1480
Combines: All w/ D & DT 414, 436,
466 engines, Replaces: 675779C1
Gasket material
Order #
Price
ABC448
$17.90
7-Piece Gasket Set
(For IHS930)
Replaces: 362299R1, 670073C1, 688928C1,
1342826C1, 1349062C1
ABC1830
$8.95
NEW! Cork / Rubber Rollpack Gasket
Material For making general purpose
gaskets. (1/16" thick x 12" wide x 24" long)
USA made NOTE: Do not use for high
temperature applications.
Front Turbo Exhaust Manifold
Fits: 1066, 1086, 1466, 1486, 1566, 1586,
3388, 3588, 3788, 4166, 4186, 4366, 4386,
6388, 6588, 6788; Combines: 915, 1460,
1470, 1480, Turbo charged engine: DT414,
DT436, DT466
Replaces: 683564C91, 683562C1
ABC1835
$10.95
NEW! Cork / Rubber Rollpack Gasket
Material For making general purpose
gaskets. (3/32" thick x 12" wide x 24" long)
USA made NOTE: Do not use for high
temperature applications.
ABC1844
$14.95
NEW! Gasket Paper
For making general purpose gaskets
(0.0160" thick x 18" wide x 98" long)
NOTE: Do not use for high temperature
applications.
ABC1846
$22.95
NEW! Gasket Paper
For making general purpose gaskets
(0.0275" thick x 18" wide x 98" long)
NOTE: Do not use for high temperature
applications.
$21.95
7-Piece Gasket Set
(For IHS929)
Replaces: 1349062C1, 1342826C1
IHS146
$74.50
Exhaust Elbow
Fits: 1066, 1466, 1566, 4166, 4366, 4186, 4386
Replaces: 675316C2
Exhaust Manifold Gasket Material
(1/16" thick x 12" wide x 28-1/2" long)
NOTE: Perforated steel core.
Engine gasket sets
NOTE: Includes all gaskets & crankshaft seals (except
IHS159
IHS160
IHS147
$39.95
$8.50
governor seal) for major overhaul.
Sleeve / Donut
(For IHS146 Exhaust Elbow)
Fits: 1066, 1466, 1566, some 88 series
Replaces: 675317C2
Sleeve / Donut
(For IHS146 Exhaust Elbow)
Fits: 1066, 1466, 1566, some 88 series
Replaces: 702299C2
NOTE: 2 required per sleeve;
Sold individually.
$115.95
Exhaust Elbow
Fits: 1026, 1256, 1456 & Industrial
Replaces: 670034C1
Order #
Price
IHS1324
$82.70
IHS1318
$131.40
Application
Fits following w/ C-60 in3: Cub, Cub Loboy,
154, 184, 185
Replaces: 352539R91, 352540R91, 355733R96
NOTE: Governor seal NOT included.
Fits: F12, F14, I12, O12, O14, W12, W14,
Replaces: 29424D, 46615D
IHS1316
$99.80
Fits: Regular & F20
Replaces: 29537D, 12734D, 12748D
IHS1326
$59.15
Fits: A, B, C, Super A up to SN: 255417
(All w/ engines 3" to 3-1/8" bore & w/out
water pump), Replaces: 53628D, 53628DG
Engine gasket sets continue on next page
187
Valve grind gaskets
NOTE: Unless specified sets include all gaskets required
when replacing the cylinder head.
Order #
IHS888
Engine gasket sets cont...
Order #
IHS1328
IHS1330
Price
$69.95
Application
Fits: Super A SN 255418 & up, Super C, 100,
130, 140, 200, 230, 240, 330, 340 gas, T4 (All
w/ 3-1/8" to 3-1/4" bore models equipped
w/ a water pump); For use on all models w/
C-113 engines equipped w/ a water pump,
C-123 & C-135 up to engine SN 100500,
Replaces: 356314R92, 356314R96, 362880R91,
367705R92, 381734R92
$99.95
Fits: H, HV, I4, O4, OS4 & W4
Replaces: 55620D, 55620DC, 53888D,
354475R95, 381729R93
IHS1332
Price
$138.45
Valve Grind Gasket Set
Fits: F20 - T20, Regular
IHS005VGK
$30.75
IHS658
$36.95
Fits: A, Super A, AV, Super AV, B, BN, C
Replaces: 354474R95
NOTE: For engines w/ 3" - 3-1/8" bore
and not factory water pump.
IHS840
$43.60
Fits: Super A, Super C, Super A1, Super
AV1 SN: 310300 & up, T4, T5, 100, 130,
140, 200, 230, 240, 330, 340 (All w/ C-113,
C-123, (C-135 in3 up to SN: 100500)
engines & w/ water pump), Replaces:
357476R95
IHS1665
$34.95
NEW! Valve Grind Gasket Set
Fits: 340, T340 both SN: 100500 & up;
Fits the following w/ C135 SN: 100500
& up: 404, 424, 444, 500, 504, 2404, 2424,
2444, 2504, 3514; C146, C153 gas, LP;
Combines: 93, 105, 203 gas; Windrower:
275, 375 gas USA made
IHS811
$67.90
IHS807
$63.60
Fits: M & Supers, MTA, I, O, W6 series, 400,
450 gas, LP, Replaces: 55621D, 55621DA,
55621DC, 355013R91, 369958R91
Lower end engine gasket set
Fits the following diesels w/ D248, D264 ,
D281 in3: MD, MDV & Supers; Super MTA diesel, ODS6, TD6, TD6-61, ID6, WD6 & Super; W6TA, 400, 450, W400, W450
Replaces: 332653R92
USA made
Description
Order # Price
NEW! Lower End Engine Gasket Set w/ seals... IHS1858.............$249.95
NOTE: To make a complete gasket set order IHS1858 & IHS1855 valve
grind set.
Fits: Cub & 154;
(184, 185 w/ Casting 355691R2)
Replaces: 251228R1, 351779R91
Description
Order # Price
Cylinder Head........................................................ IHS005................$214.99
188
Fits: Cub, 154; Also fits 184, 185 except for
the carburetor mounting gasket
Replaces: 352540R91
Fits the following gas w/ C-152, C-169,
C-175 in3: H & Supers, I, O, W4 series,
300, 350, Replaces: 354475R94
C-281 in3: M & Supers, 400, 450, I, O, T,
W6 series, Replaces: 354476R95
Cylinder head
$58.80
IHS1855
$234.95
Fits the following diesels w/ D264, D281
in3: (MD, MDV when both are updated to
D264 in3), Super MD, Super MDV, Super
MTA diesel, ODS6, TD6, TD6-61, ID6,
WD6, Super WD6, W6TA, 400, 450, W400,
W450, Replaces: 261339R92 USA made
NOTE: This is for engines w/ sleeves
that protrude above the block.
Valve grind gaskets cont...
Order #
IHS1669
IHS1692
Price
Fits the following gas, LP w/ C-221,
C-263, C-282, C-291, C-301 in3: 460, 560,
606, 656, 660, 666, 686, 706, 756, 766, 806,
826, 856; Hydros: 70, 86
Replaces: 173141R93, 372770R95,R96,R97
USA made
$64.95
$119.95
Fits the following diesels w/ D-236,
D-282, D-301 in3: 460, 560, 606, 656, (706
w/ D-282 in3), Replaces: 134403A1,
310446R95
USA made
Valve cover, push rod side cover gskts cont...
Order #
Price
IHS210GK
$5.95
Pushrod Side Cover Gasket
Fits: M & Supers, I, O, T, W6 series 400, 450
gas, Replaces: 49029DB
IHS1684
$14.95
Valve cover, push rod side cover gaskets
Order #
IHS869
IHS865
Price
$16.75
Valve Cover Gasket only
Fits: A, B, C & Supers, 100, 130, 140, 200, 230,
240, 330, 340, 404, 424, 444, 504, T4, T5 &
T340 & 500 Crawlers
Replaces: 43378DE
$14.55
$18.60
IHS1687
$12.95
IHS1680
IHS1704
$14.95
$9.95
Fits the following gas, LP: M & Supers,
MTA, I, O, T, W6 series, 400, 450
Replaces: 45952DC
NEW! Valve Cover Gasket only
Fits the following gas, LP w/ C-221, C-263,
C-282, C-291, C-301 in3: 460, 560, 606, 656,
660, 666, 686, 706, 756, 766, 806, 826, 856;
Hydros: 70, 86
Replaces: 164421R1, 369983R2 USA made
NEW! Valve Cover Gasket only w/ Copper
Stud Grommets
Fits the following diesels w/ D-236, D-282,
D-301 in3: 460, 560, 606, 656, 660, (706 w/
D-282 in3), Replaces: 278308R3 USA made
NEW! Pushrod Side Cover Gasket
Fits the following gas, LP: (H, HV, Supers),
O4, OS4, W4, Super W4, 300, 350
Replaces: 45018DB
(18-1/16" length, 4" width) USA made
NEW! Pushrod Side Cover Gasket
C-282, C-291, C-301, D-236, D-282, D-301
in3: 460, 560, 606, 656, 660, 666, 686, (706 gas,
diesel, D-282 in3); Fits the following gas, LP:
756, 766, 806, 826, 856
Hydros: 70, 86
Camshaft, parts
Order #
IHS182
Price
$238.80
Camshaft (LH Thread)
Fits: M, MTA & Supers, I, O, T, W6 series gas
Replaces: 48196DBX
Fits: H & Supers, 300, 350 gas, I, O, W4 series
Replaces: 43976DC
IHS871
IHS695
$58.50
IHS901
$59.95
IHS1555
$99.95
IHS1560
$134.95
Camshaft Gear
Fits the following gas w/C-113, C-123,
C-135, C-146, C-153 in3: A, B, C & Supers,
100, 130, 140, 200, 230, 240, 330, 340, 404,
424, 444, 504, 2404, 2424, 2444, 2504, 3514,
T340, T5, 500 Crawlers, Replaces: 6779DB,
375712R1
NOTE: 66 teeth.
Crankshaft Gear
Fits same as IHS695
Replaces: 46870DA
NOTE: 33 teeth.
NEW! Camshaft Gear
Fits the following gas, LP: H, HV, I, O, W4
series & Supers, 300, 350
Replaces: 6664DB, 6664DA, 6664D
NOTE: 48 teeth.
NEW! Camshaft Gear
Fits the following gas, LP: M, MV & Supers,
MTA, I, O, W, T6, 400, 450
Replaces: 6760DB & 6760D
NOTE: 58 teeth.
189
Crankshaft, parts cont...
Order #
Price
ABC1565
$13.25
IHS1389
$17.40
Crankshaft, parts
Order #
IHS211
Price
$285.00
IHS019
$37.95
IHS1307
$7.95
IHS020
Crankshaft
Fits: Cub & Cub Lo-Boy up to engine
SN: 261717, Replaces: 353743R93, Casting:
251264R1, 251276R11
NOTE: Has .761" rod bearing width. Will
not fit 154 & 184 unless you use the early
style connecting rods.
Crankshaft Pulley
Fits: Cub
Replaces: 251269R3
(4-5/8" O.D.)
Front Crankshaft Pulley Seal
Fits: Cub, Cub Lo-Boy 154, 184, 185
Replaces: 49177D
$48.95
Crankshaft Pulley
Fits: A, B, C & Supers, 100, 130, 200, 230
Replaces: 6502DB
IHS901
IHS1307
$59.95
Crankshaft Gear
Fits: A, B, C & Supers 100, 130, 140, 200, 230,
240, 330, 340, 404, 424, 444, 504, 2404, 2424,
2444, 2504, 3444, 3514, T5, T340, 500
Crawlers, Replaces: 46870DA
NOTE: 33 teeth.
Front Crankshaft Seal
Fits: (H, HV SN: 5416 & up), Supers, I4, O4,
OS4, W4; Fits the following gas, LP: 300, 350
Replaces: 53888D, 358787R91, 360692R91
(2.000" I.D., 2.879" O.D., .470" wide)
ABC1579
$13.90
NEW! Front Crankshaft Seal
Fits the following gas, LP, diesel: 460, 560,
606, 656, 660, (706 except German diesel),
3616; Fits the following gas, LP: 454, 544, 574,
666, 674, 686, 756, 766, 806, 826, 856;
Hydros: 70, 86; 2400, 2500, 3400, 3500A,
4500B; Fits the following diesel: 340, 504,
(3514 w/ D-188 in3)
Replaces: 129370H1, 357672R91, 606750C91,
391976R91, 317549R91, 117568H1, 119020H1
(2.375" I.D., 3.355" O.D., .475" wide)
190
Crankcase Front Cover Gasket
(Timing Gear Cover Gasket)
Fits the following gas, LP, Farmalls w/ C-113,
C-123, C-135, C-146, C-153 in3: A, AV, B, BN,
C & Supers, 100, 130, 140, 200, 230, 240, 330,
404, 424, 444, 504, 2404, 2424, 2444, 3514;
Crawlers: T340, T5, 500
Power Units: U2, U2A
Replaces: 46179DC, DD USA made
Fits the following w/gas BC-144 in3:
2300A, B250, B275, B414, 354, 434, 444, 2444, 3414, 3444, 7000 Forklift
Replaces: 3043830R1
(1.726" o/a length)
Description
Order # Price
Oil Pump Drive Gear............................................ IHS1291.............. $137.90
NOTE: 10 teeth.
Oil caps
Order #
Price
IHS406
$38.50
Oil Fill / Breather Cap w/ Clip & Copper
Filter Element
Fits: A, B, C & Supers, 200, 230, B275; B414,
354, 2300 & 3414 gas, diesel
Replaces: 49049DX, 364901R91, 364899R91
(3-1/4" tall) USA made
NOTE: Exact of original. E-coated black.
"Oil" stamped into top. Fits over 1-1/2" pipe.
JDS500
$32.50
Oil Fill / Breather Cap w/ Clip & Copper
Filter Element
Fits: Same as IHS406 (1-1/2" tall)
USA made
NOTE: Exact of original. E-coated black.
"Oil" stamped into top. Fits over 1-1/2" pipe.
ABC042
$12.95
IHS736
$9.99
Front Crankshaft Seal
Replaces: 389407R2, 389407R92
$9.30
NEW! Front Crankshaft Seal
Fits the following diesels: 806, 856, 1026,
1206, 1256, 1456
Replaces: 333750R91
(2.375" I.D., 3.355" O.D., 0.475" wide)
Oil pump drive gear
$7.95
ABC131
Oil Fill / Breather Cap w/ Clip
Fits the following gas, diesel: A, B, C &
Supers, 200, 230, B275, B414, 354, 2300, 3414
(1-1/2" tall) Economy style
Oil Fill Cap
Fits: F12 SN: 56316 & up w/ IH motor, F14,
H, M & Supers, I, O, T, W4, 6 & 9 series gas,
diesel, Farmall 300 & 350 Rowcrops, 400, 450
(No Internationals & Utilites)
Replaces: 4819D
Oil caps cont...
Order #
Price
ABC292
$1.00
Gasket only
Fits: F12, F14, H, M & Supers, I, O, T, W4,
6 & 9 series gas, diesel, Farmall 300 & 350
Rowcrops, 400 & 450
(No Internationals & Utilites)
Oil pan gaskets, parts cont...
Order #
Price
IHS925
$10.55
Oil Filter Drain Cap
Fits: Cub & Cub Lo-Boy;
Serviceable for Cub Lo-Boy 154, 184 & 185
(3/8" pipe thread) USA made
NOTE: Has stamped "IH". Cast iron w/ zinc
plating.
IHS503
$14.65
Oil Level Indicator (Petcock)
Fits the following w/ petcocks mounted in
oil pan: F12, F14, F20, F30, I12, I14, O12, O14,
W12, W14, W30, Regular, 10-20, 15-30, 22-36,
A, B, C & Supers, H, M & Early Supers, I, O,
W4 & 6 series, Replaces: 1998TA
(3/8" pipe thread)
NOTE: 2 used per tractor, Sold individually.
Oil pan gaskets, parts
Order #
Price
IHS818
$9.95
IHS809
$12.95
Oil Pan Gasket
Fits the following gas w/ C-113, C-123, C-135,
C-146 & C-153 in3: A, B, C & Supers,100, 130,
140, 200, 230, 240, 330, 340, 404, 424, 444, 504,
2404, 2424, 2444, 2504 Replaces: 43458DB
IHS813
$24.60
Oil Pan Gasket
Fits the following gas w/ C-152, C-169, C-175
in3: H & Supers, I, O, W4 series, 300, 350
Replaces: 45267DA
IHS803
IHS1673
ABC539
ABC540
$15.75
$9.95
$7.95
$3.00
Oil Pan Gasket
Fits: Cub, Cub Lo-Boy, 154, 184, 185
Replaces: 251369R1
Oil Pan Gasket
in3: M, I, D, T, W6 series & Supers, 400, 450;
Following w/ diesel D-248, D-264 in3: MD,
MDV, Super MD, MTA, WD6, Super WD6,
Super WD6-TA, TD6, 400, 450, W400, W450,
OD6, ODS6, ID6 Replaces: 46109DA
NEW! Oil Pan Gasket
Fits the following gas, LP, diesel w/ C-221,
C-263, C-282, C-291, C-301, D-236, D-282,
D-301 in3: 460, 560, 606, 656, 660; Fits the
following gas: 666, 686, (706 gas or D-282 in3
diesel); Fits the following gas, LP: 756, 766,
806, 826, 856; Hydros: 70, 86
Replaces: 160476H1, 318058R91, 369984R1
USA made
Oil Pan Drain Plug
Fits the following gas, LP, diesel: 100 thru
660, B250, B275, B414, 3414, 3444, 706 thru
4386 except German diesel, 3488 thru 3688;
Following w/ gas: 454, 464, 544, 574, 674, 826,
2400, 2500, Replaces: 359885R1, 688067C1
(7/8"-18 UNF) USA made
Oil filter elements w/ gasket
Order #
Price
Application
Cartridge type
ABC093
$9.75
Fits the following gas w/ C-60 in3:
Cub, Cub Lo-Boy 154, 184, 185
Replaces: 376373R91
(3-15/16" tall, 2-1/2" wide)
ABC094
$12.45
ABC095
$10.15
Washer / Gasket for Oil Pan Drain Plug
Fits the following gas, LP, diesel except
German diesel: 100 thru 660, B250, B275, B414,
3414, 3444, 706 thru 4386, 3488 thru 3688;
Following w/ gas: 454, 464, 544, 574, 674, 826,
2400, 2500 Replaces: 3405HA USA made
NOTE: Copper
C-264, C-281 in3: F12, F14, F20, F30, T20, 10-20,
Regular, W30, A, AV, (B, BN up to SN: 97397),
(H, HV up to SN: 121021), (M, MV SN: 59394
& up) Super M, Super MTA, O4, I4 & W4 up
to SN: 4957; T6, I6 & W6 SN: 4253 & up; 400,
W400, 450, W450
Replaces: 63858D, 355010R91, 360431R91 &
376375R91 (6-1/8" tall, 3-1/4" wide)
C-146, C-152, C-153, C-164, C-169, C-175 in3:
A, AV & Supers, (B, BN SN: 97398 & up), C,
Super C, (H, HV SN: 121022 & up), Super H,
Super, HV, (O4, I4, T4, T5 & W4 SN: 4958 &
up), Super W4, 100, 130, 140, 200, 230, 240, 300,
330, 340, 350, 404, 424, 444, 504, 2404, 2424,
2444, 2504, 3444
Replaces: 63855D, 355009R91, 360430R91,
376374R91 (4" tall, 3-1/4" wide)
Oil filter elements w/ gasket continue on next page
191
Economy muffler clamps cont...
Oil filter elements w/ gasket cont...
Order #
Price
Application
ABC096
$17.15
in3: 15-30, 22-36, (M, MV up to SN: 59393), (T6,
I6, W6 up to SN: 4252), W9, 600, 650;
Following w/ diesel D-248, D-264, D-281,
D-335, D-350 in3: MD, Super MD, ODS6, WD6,
Super WD6, WD9, 400, 450, 600, 650
Replaces: 63884D, 63885D, 257867R92,
360432R91, 376376R91
(6-15/16" tall, 3-15/16" wide)
ABC097
$9.30
C-301 in3: 460, 560, 606, 656, 660, 706, 756, 806,
826, 856, 2606, 2656, 2706, 2756, 2806, 2826,
2856; Fits the following diesel w/ D-166,
D-188, D-236, D-282, DT-361, DT-407: 340,
460, 504, 560, 656, 660, 706, 806, 856, 1026,
1206,1256, 1456, 2504, 2606, 2656, 2706, 2806,
2856, 21026, 21206, 21256, 21456; Combines:
815, 915, Replaces: 279994R91, 323827R91
(5-1/2" tall, 3-7/8" wide)
Price
IHS152
$425.00
ABC108
ABC107
$39.40
$53.60
Price
$3.25
Flywheel w/ Ring Gear
Fits the following w/ D-414, DT-414, D-436,
DT-436 in3: 1066, 1086, 1466, 1486, 1566, 1586,
3688, 4166, 4366, 6388
Replaces: 672215C91 Close out
Flywheel Ring Gear only
Fits: A, B, C & Supers, 100, 130, 140, 200, 230,
240, Replaces: 55755DB
NOTE: 90 teeth.
2" Clamp
NOTE: Use w/ IHS309, IHS497 mufflers.
ABC578
$3.25
2-1/4" Clamp
ABC580
$3.25
2-1/2" Clamp
NOTE: Use w/ IHS311, IHS313 mufflers.
ABC583
$4.95
2-3/4" Clamp
ABC585
$4.95
3" Clamp
NOTE: Use w/ IHS041, IHS317, IHS1772
mufflers.
ABC1771
$7.95
NEW! 4" Clamp
NOTE: Use w/ IHS1769 muffler.
Order #
Price
ABC341
$6.20
ABC360
$9.95
ABC327
$6.95
ABC351
$8.95
FDS116
$7.85
Flywheel Ring Gear only
Fits the following gas: H & Supers, I, O, W4
series, 300, 330, 340 & 350
Replaces: 45638DB
NOTE: 104 teeth.
Economy muffler clamps
Order #
Price
ABC568
$2.95
1-1/2" Clamp
ABC570
$2.95
1-5/8" Clamp
ABC572
$2.95
1-3/4" Clamp
ABC574
$3.25
1-7/8" Clamp
192
Dimensions
Dimensions
Muffler clamps
Flywheels, ring gears
Order #
Order #
ABC576
1-1/2" Chrome Clamp
Fits: IH/Farmall models
Replaces: 351437R1
Original style
1-3/4" Chrome Clamp
Fits: I300, I330, F340, I340, I350 & 504
Replaces: 362394R1
2" Chrome Clamp
Replaces: 48899DA
Original style
2-1/2" Chrome Clamp
Replaces: 350602R1
Muffler Clamp Kit
Serviceable for gas, LP w/ underslung
exhaust: F240, I300, I350, 330, 340, 404, 424,
444, 504, 2444, 2504, T4 Crawler, Replaces:
362300R1
NOTE: Includes: (2) high strength aluminum
clamps, nuts, bolts & lock washers).
Underslung muffler u-bolt
Fits: Cub, Cub Lo-Boy w/ horizontal exhaust
Replaces: 362363R1
Description
Order # Price
NEW! Underslung Muffler U-Bolt...................... IHS1231.............. $12.50
NOTE: Installs around the mufflers for support.
Mufflers
Order #
Price
Application
IHS1212 $33.95
NEW! Fits: Farmall Cub w/ vertical exhaust
Replaces: 351436R92 Restoration quality
NOTE: High temperature paint; IH logo
& part number is stamped into the
TOP HAT OF THE MUFFLER.
IHS1706 $33.95
Mufflers cont...
Order #
Price
Application
IHS500
$51.85
Fits: H, W4 & Supers
(1-3/4" dia. outlet, correct body height of 12")
USA made, Restoration quality
Dimensions like original
NOTE: On applications using cast 2 bolt
flange distillate pipe (IHS779) you may need
to expand muffler inlet.
NEW! Fits: Farmall Cub w/ vertical exhaust
SIDE OF THE MUFFLER.
IHS1212, IHS1706 (Vertical body) dimensions:
Exhaust pipe: 1.375" O.D. x 9.5" length, Body:
3" dia. x 10.875" length, Intake pipe: 1.313" I.D.
x 1-7/8" length
IHS500 (Vertical round body) dimensions: Inlet
length: 2", Inlet I.D.: 2-3/8", Shell length: 12", Shell
diameter: 5-1/2", Outlet length 13", Outlet O.D.:
1-3/4", Overall length: 27" (If raincap is needed
order RCS004, if clamp is needed order ABC351)
IHS501
$62.15
IHS1217 $39.95
NEW! Fits: Farmall Cub, IH Lo-Boy both
w/ underslung exhaust (horizontal muffler)
TOP HAT OF THE MUFFLER.
IHS1709 $39.95
NEW! Fits: Farmall Cub, IH Lo-Boy both
w/ underslung exhaust (horizontal muffler)
SIDE OF THE MUFFLER.
IHS1709 (Horizontal, Underslung) dimensions:
Exhaust pipe: 1.375" O.D. x 9.5" length, Body:
3" dia. x 10.875" length, Intake pipe: 1.313" I.D.
x 1-7/8" length (Use IHS1231 u-bolt for support)
IHS497
$46.95
IHS309
$30.55
length: 2", Inlet I.D.: 2-3/8", Shell length: 15-1/2",
Shell diameter: 5-1/2", Outlet length 13", Outlet
O.D.: 1-3/4", Overall length: 30-1/2" (If raincap is
needed order RCS004, if clamp is needed order
ABC351)
IHS311
$29.90
Fits the following w/ gas C-135 in3: A, B, C &
Supers, 100, 130, 140, 200, 230, 240, F330, F340,
I340, T340
Replaces: 360720R91 USA made
Fits: H & Supers, I & W4 series, F300 - 350 gas
IHS311 (Vertical round body) dimensions:
Inlet length: 2-1/2", Inlet I.D.: 2-3/8", Shell length:
14-1/2", Shell diameter: 5-1/2", Outlet length: 113/4", Outlet O.D.: 2-1/2", Overall length: 29"
(If raincap is needed order RCS007, if clamp is
needed order ABC351)
IHS313
$28.80
Fits: A, B, C & Supers, 100, 130, 200, 230
USA made
Original style; Restoration quality
length: 2-3/8", Inlet I.D.: 2", Shell length: 16-1/2",
Shell diameter: 4-1/4", Outlet length: 9-5/8", Outlet
O.D.: 1-3/8", Overall length: 29" (If raincap is
ABC327)
Fits: 300, 350
(1-3/4" dia. outlet) USA made
Restoration quality
Fits: H, M & Supers gas, diesel, I, T, W4 & 6
series, 300, 350, 400, 450, F460, I460, F560, I606
gas, LP, diesel & 656 Hydro
Replaces: 350601R95, 370773R91, 403551R1
USA made
IHS313 (Vertical round body) dimensions:
Inlet length: 2-1/2", Inlet I.D.: 2-3/8", Shell length:
13", Shell diameter: 6", Outlet length: 14", Outlet
O.D.: 2-1/2", Overall length: 29" (If raincap is
ABC351)
IHS041
length: 2-3/4", Inlet I.D.: 1-15/16", Shell length: 17",
Shell diameter: 4-1/4", Outlet length: 9-1/4", Outlet
O.D.: 2", Overall length: 29" (If raincap is needed
$45.80
Fits: 706 gas w/ C-263, (806 gas w/ C-301 &
diesel w/ D-361)
length: 3-1/2", Inlet I.D.: 2-15/16", Shell length: 17",
Shell diameter: 5-1/2", Outlet length: 14", Outlet
O.D.: 3", Overall length: 34" (If raincap is needed
Mufflers continue on next page
193
Exhaust stacks, parts
Chrome; Double wall (Lined unless otherwised noted)
Mufflers cont...
Order #
Price
Application
IHS315
$42.20
Fits: I9, W9, T9 gas & diesel & TD14 diesel, IH
600 & 650 (C-350 gas & D-350 diesel engines)
Replaces: 303973R91, 264116R91 & 264117R91
USA made
IHS317
$33.05
Order #
Price
MHS050
$106.95
Exhaust Stack (Straight)
Fits: F20
(2-3/8" I.D. at base, 3-1/2" O.D., 19" tall + 2"
tall base)
USA made
length: 3-1/2", Inlet I.D.: 3-1/8", Shell length:
14-1/2", Shell diameter: 6", Outlet length: 3-1/2",
Outlet O.D.: 3", Overall length: 22" (If raincap is
needed order RCS009)
ABC351
Fits: F30, I30, W30 gas, TD18 diesel
IHS571
$8.95
Chrome Clamp (2-1/2")
Fits: Same as MHS050
$85.95
Fits: Cub
(1.365" I.D., 2-1/2" O.D., 18" tall + 3" base)
USA made
length: 4-3/4", Inlet I.D.: 2-3/4", Shell length:
15", Shell diameter: 4-1/4", Outlet length: 6-1/2",
Outlet O.D.: 2-3/4", Overall length: 26" (If clamp is
needed order ABC585)
IHS1772 $94.95
IHS1769 $104.95
NEW! Fits the following gas, LP: 666, 686,
H70, H86, 706, 766, 806, 826, 856; (706 w/
D310 German diesel); Diesels: 806, 856
NOTE: Black finish.
ABC341
IHS1772 (Vertical) dimensions: Inlet length:
3-1/4", Inlet I.D.: 2-15/16", Shell length: 23", Outlet
length: 8-1/4", Outlet O.D.: 3", o/a length: 34" (If
clamp is needed order ABC585)
IHS572
$6.20
$106.60
Exhaust Stack w/ Bend
Fits: Cub
(1.365" I.D., 2-1/2" O.D., 18" tall + 3" base)
USA made
NEW! Fits: 1066, 1466, 1566, 4366, 4386 up to
SN 2500 Replaces: 534546R6 USA made
NOTE: Black finish.
IHS1769 (Vertical) dimensions: Inlet length: 12",
Inlet I.D.: 3-3/4", Shell length: 23", Outlet length:
8-3/4", Outlet O.D.: 3-1/2", o/a length: 44" (If clamp
is needed order ABC1771)
IHS582
$106.75
Fits: A, B, C & Supers, 100, 130, 140,
200, 230, 240, F & I 330 & 340, T-340 Crawler
(1-7/8" I.D., 3" O.D., 24" tall + 3" base)
USA made
Raincaps
Order #
Price
RCS002
$10.80
(1-1/4" - 1-7/16")
RCS003
$9.80
(1-1/2" - 1-11/16")
RCS004
$9.65
(1-3/4" - 1-15/16")
RCS005
$10.60
(2" - 2-3/16")
RCS006
$9.95
(2-1/4" - 2-7/16")
RCS007
$10.35
(2-1/2" - 2-11/16")
RCS014
$32.10
(2-1/2") NOTE: Chrome-plated.
RCS009
$13.35
(3" - 3-3/16")
RCS015
$36.65
(3") NOTE: Chrome-plated.
RCS016
$39.35
(3-1/2") NOTE: Chrome-plated.
194
Fits the following pipe O.D.:
ABC327
$6.95
Chrome Clamp (2")
IHS569
$119.95
Fits: A, B, C & Supers, 100, 130, 140,
200, 230, 240, F & I 330 & 340, T-340 Crawler
(1-7/8" I.D., 3" O.D., 24" tall + 3" base)
USA made
Exhaust stacks, parts cont...
Order #
IHS581
ABC351
Price
$106.75 Exhaust Stack (Straight)
Fits: H, M & Supers, I, O, T, W4 & 6 series
gas, diesel, 300, 340 diesel, 350, 350 Utility,
400 gas, diesel, 450 gas, LP, diesel, I & F
460 gas, diesel, 560 gas, LP, diesel, 606
C-221 gas, diesel, 706 diesel w/ D282 engine,
660 gas, 656 gas, diesel, 544, 454, 574
& 674 gas, diesel
(2-3/8" I.D., 3-1/2" O.D., 24" tall + 3" base)
USA made
$8.95
Choke cables cont...
Order #
Price
IHS252
$15.95
IHS705
$15.50
Metal Sheathed Choke Cable
Fits: F300, F350, 656, 666, 686, 706 & 756, 826,
Hydro 70 & Hydro 86 (All w/ gas)
Replaces: 363709R95
(64" long)
Restoration quality
IHS250
$15.95
Fits: F400, F450, W400, W450, 560 & 660;
The following LP tractors: 706, 756, 806, 826 &
856, Replaces: 374218R92 & 363710R93
(71" long)
Restoration quality
IHS699
$15.50
ABC423
$10.95
IHS568
IHS241
$119.95
$240.00
Fits: H, M & Supers, I, O, T, W4 & 6 series
gas, diesel, 300, 340 diesel, 350, 350 Utility,
400 gas, diesel, 450 gas, LP, diesel, I & F
460 gas, diesel, 560 gas, LP, diesel, 606
C-221 gas, diesel, 706 diesel w/ D282 engine,
660 gas, 656 gas, diesel, 544, 454, 574
& 674 gas, diesel
(2-3/8" I.D., 3-1/2" O.D., 24" tall + 3" base)
USA made
Fits: 1026, 1066, 1206, 1256, 1456,
1466, 1566, 4166, 4366 & 4386
(3-3/4" I.D., 5" O.D., 36" tall + 8" base) USA made
NOTE: Chrome, Double-wall.
Choke cables
NOTE: Check length before ordering.
Order #
IHS990
Price
$15.50
IHS1250
$19.95
JDS718
$18.75
Fits: Cub Lo-Boy 154 SN 14536 & up, 184 &
185, Replaces: 529926R1
(30" long)
Restoration quality
Choke Control Rod
Fits: Super A, Super AV & 100, Replaces:
350744R1; Serviceable for 130 & 140 if bends
are modified, Replaces: 366732R1
(44-3/8" length, 3/16" O.D.)
USA made
Fits: IH / Farmall models
w/ 47" or less cable
NOTE: Cut to length.
Choke Cable
Fits: IH 404, 424, 444, 504, 2424, 2444,
2504 & 3444, Replaces: 371796R92
(55" long)
Fits: Farmall 460, 656 LP Rowcrop, 766, 806,
856, 2806 & 2856, Replaces: 374219R93
(69" long)
Restoration quality
Fits: Tractors, Forklifts & other Applications
(72" long)
NOTE: Cut to length. Can also be used as a
"Stop" cable for diesel engines.
Carburetors, parts
Can't find your carburetor number? Look on page 288!
NOTE: Carburetors are limited to replacement only - NO
refunds. No replacement will be given if dirt, rust, etc. is
found in the carburetor or if it has been taken apart.
Order #
Price
IHS738
$265.00 Carburetor
IHS240
$28.95
New, IHC Replacement
Fits: Cub w/ engine SN: up to 312389 &
Early 154, Replaces: 63349C91, 251234R94,
364579R91 & 405004R91
(15/16" throttle bore)
NOTE: Looks like original IHC carburetor.
Does not include choke lever.
Choke Lever w/ Screw
Fits: Cub & Cub Lo-Boy (not 154, 184 & 185)
Replaces: 351324R1
Carburetors, parts continue on next page
195
Carburetors, parts cont...
Order #
Price
Price
IHS1465
$14.95
ABC1159
$5.00
IHS905
$270.95 Carburetor
ABC223
$299.95 Carburetor
ABC564
$26.40
IHS966
(1/4"
line)
$25.25
IHS1124
(5/16"
line)
$25.25
Idle Tube (Pick up Tube)
Fits: Cub (1947-74) w/ IHC carburetor
Replaces: 251331R1 & 352140R1
(.1085" diameter x 1.795" long)
IHS1461
$14.95
Main Jet
Replaces: 354192R91
(.375" hex x .940" long w/ 0.030" jet)
IHS1463
$14.95
Main Jet
Replaces: 364610R91
(.375" hex x .940" long w/ 0.035" jet)
IHS1460
$20.75
Main Nozzle
w/ small bore, Replaces: 352138R31
(.3125" hex x 1.777" long x .122 tube
w/ .060" hole)
NOTE: Brass; Has 4 discharge holes.
$20.75
IHS417
$269.35 Carburetor
New, Zenith Replacement
Fits: Cub, 154, 184 & 185
(All w/ engine SN: 312390 & up)
Replaces: 70949R92, Zenith 13781 & 13794
(1-1/64" throttle bore)
NOTE: On older Cubs, customer may have
to use (2) carb gaskets to clear the butterfly.
IHS420
$266.95
Carburetor
New, Marvel Schebler Replacement
Fits: A, AV, B, BN, C, Super A & Super C,
Replaces: TSX 156, 157, 319 & 333; Zenith
9749 & 9752
(2-3/8" c.c. stud holes)
ABC1156
$21.80
Main Nozzle
(For Marvel Schebler carburetor)
Fits: A, AV, B, BN, C & U2 Power Unit
Replaces: 69968D & Marvel Schebler 47-270
ABC297
196
$5.95
Carburetor Elbow & Strainer Assy.
Fits: A thru Super C using Marvel Schebler
carburetor
(Male end (Screen end) - 1/8" pipe
thread; female end - 1/4" flare)
NOTE: Must have internal threads. Used
w/ flair fitting; not compression fitting.
Throttle Disc
Fits: A, AV, B, BN, C, U2 w/ TSX156, 157,
171, 198, 319, Replaces: 69944D
(15°, 1.105" O.D.)
New, Zenith Replacement
Fits: A, AV, B, BN, C, Super A & Super C,
Replaces: 52499D, 375560R91 & 377600R91
Replaces: TSX 156, 157 & 319; Zenith 9749,
9752, 12115, 12122, 12123, 12225, 12285,
12475, 12522, 12613 & 14007
(2-3/8" c.c. stud holes)
New, Zenith (12522) Replacement
Fits: A, B, BN, C & Supers, 100, 130,140, 200,
230, 240, 330, 340 & 404
Crawlers: 500, T-340, T4 & T5
Windrower: U-2 & 201
Replaces: TSX 156, 157, 171, 198, 319, 333,
347, 348, 730, 744, 748, 827 & 926; Zenith
9749, 9752, 10514, 11115, 12911, 12122, 12115,
12285, 12225, 12475, 12522, 16232 USA made
NOTE: Has 1-1/8" throttle bore. For some
applications you must trim throttle shaft to
clear the block. Will fit 2-5/16" - 2-3/8" c.c.
stud holes because of the smaller diameter
studs that are included.
Main Nozzle
w/ large bore, Replaces: 251332R11
(.3125" hex x 1.777" long x .122 tube
w/ .100" hole)
NOTE: Brass; Has 6 discharge holes.
IHS1462
Throttle Body Repair Bushing
(For small bowl Marvel Schebler carburetor)
Fits: A, B, C series & Supers, 100 thru 444,
454 thru 674
(.383" O.D., .247" I.D., .501" long)
NOTE: Repairs worn throttle body using
1/4" throttle shafts.
$2.50
Order #
ABC513
Main Jet Adjusting Needle Assy.
(For Zenith carburetors)
Fits: Some A & B series w/ 8928, 9167, 9749,
9752, 11776; C w/ 10441, A; Super A w/
10522, A, 11339, A; Super C w/ 11340, A,
14008; 100 thru 230 w/ 12341, A, B, 12342,
A, B, 12632; Power Units U-169 w/ 11927 &
U-263 w/ 12747 (3/8" x 24" thread)
Carburetor Elbow w/ Strainer Assembly
(For Carter & Zenith carburetors)
Fits: A, B, C & Supers, 100, 130, 140, 154, 184,
185, 200, 230, 240, 330, 340, 404, 444, 504,
2444, 3514, T4, T5 & T340
Replaces: 53796D, C150-17 & 354827R91
USA made
NOTE: Check line before ordering.
Order #
IHS377
IHS968
IHS972
IHS1386
IHS1358
IHS1359
IHS1357
ABC1182
Price
$534.95 Carburetor (Down Draft)
Fits: 2300 series A, B250, B275, B414, 276, 354,
434, 444, 2444, 3414, 3444 & 7000 Forklift
(All w/ BC-144 British engines)
Replaces: 3063945R91, 3044193R92 & Zenith
C1759 NOTE: Looks different, works
great! If carburetor gasket is needed order
ABC416.
$33.95
$24.60
$24.95
$14.50
$18.95
$14.50
$15.70
Throttle Shaft
(For original British Zenith carburetor)
Fits: 2300A, B250, B275, 276, B414, 354, 434,
444, 2444, 3414, 3444 & 7000 Fork lift (All w/
BC 144 engine & carb VN, VNN, VNP)
NOTE: Will not fit IHS377 carburetor.
Carburetor Fuel Line Fitting w/ Strainer
(For IHC carburetors)
Fits: F12, F14, H, M, MD, MTA, & Supers,
I, O, O12, O14, W, W12, W14, T (4 thru 9
series), 300 thru 856 & 3616
Combines: 303 thru 715
Replaces: 29902DX
(1/4" pipe to 5/16" flare) USA made
Throttle Shaft
(For Carter UT series carburetor)
Fits: Super A, C, Super C, 100, 130, 200, 230
w/ cast iron upper body carb 733, 734, 771,
27015, Replaces: 354805R91, R92, Carter
3-662S (.249" O.D., 2.475" machined length)
Throttle Shaft (For IH carburetor)
Fits: H, HV & 4 series (All w/ carb 45108DB,
45108DC, 50981D)
Replaces: 45112DAX
(2.875" shaft length)
NOTE: Has steel governor drive keyway.
Fits: Super H, M, 6, 9 series & Supers, MTA,
(F300 thru 450 distillate, kerosene)
Replaces: 54488DAX
Fits: M, MV & 6 series w/ IH carb 50983D &
throttle body 6513D
Replaces: 47389DAX & 47389DX
Choke Disc
Fits: 330, 340 w/TSX748, 827
Replaces: 373370R91, 27-530, 27-539
(1-5/16" O.D.)
Order #
Price
ABC1167
$12.25
Venturi
Fits: U2, 330, 340 w/ TSX171, 748, 827
Replaces: 69958D & 46-467
(11/16" diameter throat) NOTE: Plastic.
IHS995
$58.95
Carburetor Float Valve Assembly
Fits: MD series, ID, OD, TD, WD6 thru 9
series, 400D thru 650D series
(All diesels w/ F8 starting carburetor)
Replaces: 32581DXB USA made
Carburetor gasket kit
Fits: MD Series, ID, OD, TD, WD6
thru 9 series, 400D thru 650D series
(All diesels w/ F8 starting carburetor)
Replaces: 53459DA & 32606DD USA made
Description
Order # Price
2-Piece Gasket Kit.................................................. IHS997................ $18.95
Carburetor to manifold gaskets
Order #
Price
ABC543
$1.95
Application / Dimensions
Fits: Cub up to SN: 196899 & Early 154
(For use w/ IH carburetor)
Replaces: 251235R1
ABC408
$1.39
ABC410
$1.49
Fits: A, B, C, Supers, F12, F14, 100, 130, 140,
200, 230, 240, 330, 340 & 404
(2-3/8" - 2-7/16" slotted bolt holes,
1-1/8" center hole)
(2-15/16" c.c. bolt holes, 1-3/4" center hole)
ABC416
$1.39
ABC424
$1.39
Fits: H, W4, 454, 464, 574, 674, 2400A, 2400B,
2500A, 2500B, 3400A & 3500A
Fits: F30, W30, Super H, M, Super M, MTA,
300, 350, 400, 450, 460, I6, W6, Super W6, W9,
T6, T9, 504, 560, 656, 666, 686, 706, 756, 766,
806, 826 & 856 Replaces: 21632D & 530681R2
197
Carburetor floats cont...
Order #
Price
ABC190
$15.75
ABC452
$23.60
Application
For Zenith carburetors
Carburetor floats
Order #
Price
Application
For Original IHC carburetors
IHS360
$51.75
Fits: Farmall "Regular" & IH 1020
Replaces: 16876
(1.982" O.D., .964" I.D., .285" wide slot, .666"
thick) NOTE: Cork.
IHS618
$29.95
Fits: F12, F14, I, O, W12 & W14
Replaces: 25945D
(1.760" O.D., 1.000" wide)
IHS575
Fits: Cub, Cub Lo-Boy, A, B, C & Supers, 100,
130, 140, Late 154, 200, 230, 240, 330, 340, 404
& Power Unit (All w/ Zenith 8928, 9167,
9722, 9748, 9749, 9750, 9751, 9752, 10386, A,
C, 10441, A, 10498, 10514, A, 10522, A, 10652,
11985, 11115, A, 11188, 11338, A, B, C, 11339,
A, 11340, A, 11548, 11704, A, B, 11776, 11812,
A, 11882, 12020, 12122A-C, 12123, A, B, 12193,
A, 12225, A, B, 12285, A, 12340, 12341, A,
B, 12342, A, B, 1247S, 12612, 12613, 12632,
0-12911, 0-13028, 0-13056, 13781, 13794),
Replaces: 53783D & C85-28
Fits: 444, 504, 544 & 666 (All w/ Zenith 12685,
12758, 13024, 13384, 13716); Power Units
w/ Zenith 13406, 13465, 13588
$79.75
Fits: F20, (IH F20 w/ carb 6392), T20,
(F30 & W30 - both using K5 carburetor)
Replaces: 21170D
Carburetor repair kits
Economy carburetor repair kits
Contain: Needle & seat, float lever pin, seal, gaskets
IHS204
$19.95
& instructions.
Fits: Cub & Early 154 using IH carb
Replaces: 251293R91
(1.405" O.D., .790" wide)
IHS203
Basic carburetor repair kits
Contain: Throttle shaft, needle & seat, float lever pin,
seal, gaskets & instructions.
Complete carburetor repair kits
$19.95
Contain: Choke & throttle shafts, needle & seat valve,
float lever pin, miscellaneous plugs & screws, throttle shaft
Fits: H, W4, I4 & O4
Replaces: 45114D
seals, adjustment screw & gaskets.
Order #
Price
Economy carburetor repair kits
IHS387
$22.50
Fits: Farmall Super H, M & Supers, I, O, T,
W6 series, W9, 300, 350, 400, 450, 460, 544,
560, 574, 606, 600, 650, 656, 660, 666, 674, 706,
756, 766, 806, 826, 856 & 2500 gas
Replaces: 47398D
For Marvel Schebler carburetors
ABC036
$11.95
ABC037
$19.95
198
Fits: A, B, C & Supers, 100, 130, 140, 200, 230,
240, 330, 340, 404, 424, 444 & 504 (All w/ TSX
156, 157, 319, 333, 348, 744, 748, 827, 896);
U2 Power Units w/ TSX 171 & 198
Crawlers: T340 & T5, Replaces: 69919D
Fits: 454, 464, 544, 574 & 674 all w/ TSX959,
504, Hydro 70, Hydro 86, 686, 2400, 2500A,
2500B & 3514; Power Unit w/TSX925, 932,
932SL, 933 & 939; Combines: 105 & 203 (w/
TSX 857, 927, 934, 939, 940, 946, 959, 974, 980,
984SL, 985 SL), Replaces: 381962R1 & C85-156
ABC228
$21.95
ABC1346
$25.70
Economy Carburetor Repair Kit
Fits: Cub & Early 154 (Both w/ 63349C91,
364579R91, 251234R94 & 405004R91)
USA made
Fits: Cub, Cub Lo-Boy, 154, 184, 185, A,
B, C & Supers, 100, 130, 140, 200, 230, 240,
330, 340, 404, 424, 500 Crawler (All w/ carb
8928, 9167, 9748, 9749, 9750, 9752, 10386,A,C,
10441,A, 10498, 10514, 10522,A, 10652, 10998,
11115,A,D, 11188, 11888A,C, 11338,A, 1338B,C,
11339,A, 11340,A, 11548, 11704,A,B, 11867,
11882, 12020, 12115, 12122, 12123, 12193,
12225, 12285, 12340, 12341, 12342, 12475,
12476, 12612, 12613, 12632, 12750, 12911,
13028, 13056, 13542, 13781, 13794, 14007
USA made
Carburetor repair kits cont...
Order #
ABC220
ABC1387
IHS729
ABC1348
ABC311
Price
$22.50
(For Marvel Schebler carburetors)
Fits: A & B (w/ TSX 156 & 157); Super A &
Power Units (w/ TSX 156, 157, 171, 198, 333,
348 & 926); C w/ TSX319; Super C w/ TSX
333; 130 & 140 (w/ TSX 730); 200, 230 & 240
(w/ TSX 744); 340 w/ TSX 748; 404 w/ TSX
748 & 827; 424 & 444 w/ TSX 896SL; 500C w/
TSX 930, 948 & 949; 504 w/ TSX 857; 2444 w/
TSX 896 USA made
$48.75
$42.15
$24.95
$27.50
ABC1344
$21.95
ABC1349
$24.95
Price
FDS212
$21.95
(For Carter carburetors)
Fits: Super A, Super AV, 100, 130, 140, 200
w/ aluminum upper carb body w/ carb UT,
UT26125, UT24185 & O.E.M. carb 373957R91,
373959R91, 373961R91 & 373962R91
Fits: 454 w/ TSX 959; 504 w/ TSX 857; 544 w/
TSX 934; 574 w/ TSX 959; 656 w/ TSX 927;
666 w/ TSX 974 & 975; 674 w/ TSX 959; 686
w/ TSX 974; 2504 w/ TSX 857; 2544 w/ TSX
934; 3514 w/ TSX 857, 943 & 959, Power Units
w/ TSX932, 932SL, 933, 939 & 940 USA made
IHS991
$84.95
(For IHC carburetor)
Fits: F12, O12, W12; F14, O14 & W14
(All w/ OEM carbs 24707B,C,D, & 29953D)
NOTE: Includes throttle shaft which must be
modified to fit.
IHS993
$84.95
Fits: Power Units U169, U220, U240, U269,
U282 (All w/ carb 11175,A,B, 11176,A,B,
11237,A, 11237D, 11670, 11697, 11698,
11927, 11978, 12106), Replaces: 262523R92,
262526R92, 262525R92, 269477R91,
270802R91, 270804R91, 274648R91 USA made
IHS574
$34.95
Basic Carburetor Repair Kit
(For K5 Zenith carburetor)
Fits: F20 & T20 (w/35539D), F30 & W30
(Both w/ K5 carb), Replaces: 6392, 21271D,
20590D, 21950D, 29472D & 37449D
IHS820
$29.95
Fits: Cub w/ 63349C9, 251234R94, 364579R91
& 405004R91 USA made
NOTE: Includes discharge tube, choke shaft,
idle adjustment screws.
ABC467
$36.45
ABC157
$31.95
ABC145
$35.75
Fits: Super H w/358065R91, 358554R91, M
w/ 47387DC & 50983DC, Super M, MTA
w/ 356948R92 & 357231R92, 300 & 350 (w/
361525R92 & 363741R93); 400 w/ 362173R92;
450 w/ 362957R91; 460 w/ 367258R92 &
380956R96; 544 w/ 406803R91; 560 w/
367259R92 & 381984R95; 656 w/ 386424R96 &
388297R94; 660 w/ 372723R92 & 379813R95;
706, 756 & 806 w/ 378196R94, 534933R91; 766
w/ 539575R91; 2544 w/ 406804R91; Combine
w/ 379813R95, 756, 806 w/ 378196R94 &
534933R91
Order #
(For British Zenith w/ VN & VNP series
carburetors) fits: BC144 engines SN 3525 &
up, Late B275, 276, B414, 3414, 434, 444, 2444,
3444, 354, 7000 Fork Lift (All w/ 3063945R91
& 3106595R91)
Basic carburetor repair kits
Fits: 504, 3514 w/ TSX857
USA made
(For Zenith carburetor)
Fits: 444, 504, 666, 686, 756, 766, 2444, 3514,
Hydros: 70 & 86; Combines: 93, 105, 203
(All w/ 12685, 12758, 13384, 13406, 13465,
13588, 13716), Replaces Zenith K2048, K2049,
K2050, K2127 & K2136 USA made
(For British Zenith VNN carburetors)
Fits: BC144 engines up to SN 3524, Some
B250, Early B275, B414, 3414 & 434 w/
3044193R92
Fits: A, B, BN, Super A & Super C
(All w/ TSX 156, 157, 319, & 333)
Fits: A, B, BN, C, Super A & AV
(All w/ 9749 & 9752)
Fits: A, B, BN, Super A & AV
(All w/ 10514A); 100 & 130 (Both w/ 11340 &
11704)
Carburetor repair kits continue on next page
199
Complete carburetor repair kits cont...
Order #
ABC146
Price
$32.65
Complete Carburetor Repair Kit
Fits: A, B & BN (All w/ 8808)
Basic carburetor repair kits cont...
Order #
ABC147
Price
$45.25
Fits: Super A & Super C (Both w/ 11115)
ABC231
ABC162
ABC465
$29.95
$23.25
$25.95
ABC203
$27.95
ABC469
$38.85
ABC463
$23.95
(For Carter carburetor w/ cast iron upper
body)
Fits: Super A SN: 255418 & up, C, Super
C, 100, 130, 200, 230 (w/ UT374S, UT652 &
UT771SA), Replaces: 76769R1
Fits: H, HV & 4 Series (All w/ 45108DB,
45108DC, 50981D)
Fits: Super H w/ 358065R91; M, MV, W6, I6
& O6 (All w/ 50983D & Throttle Body 8557D
or 8867D); Super M, MTA & Super W6
(All w/ 356948R92); W9, WR9 & I9 (All w/
52714D, 52815D & 60329D); 300, 350, 400, 450,
W400 & W450 (All w/ 361525R92)
Fits: 200, 230, 240, 330 & 340
(All w/ TSX 744, 748)
Fits: 560 & 660 w/ 372723R92 & 381984R91
Fits: 454, 464, 574, 674, 2400A, 2400B, 2500A &
2500B (All w/ TSX 959, 984SL, 985SL)
Complete carburetor repair kits
IHS825
200
$46.25
Fits: Cub w/ 63349C9, 251234R94, 364579R91
& 405004R91 USA made
NOTE: Includes discharge tube, choke shaft,
idle adjustment screws, fuel screen.
ABC142
$49.10
ABC179
$53.95
Fits: A, B, Super A & AV (All w/
10514A); 100 & 130 (Both w/ 11340 & 11704)
Fits: A, B, Super A & AV, C
(All w/ 9752)
ABC144
$56.50
Fits: H, HV & 4 series
(All w/ 50981D)
ABC296
$51.10
Fits: H, HV & 4 series (DISTIL.)
(All w/ 45108D)
ABC181
$57.95
ABC182
$54.95
IHS999
$52.35
Fits: M, MV, 6 Series w/carb 50983D &
throttle body 8557D or 8867D
(Shaft Length = 3.314")
Fits: M, MV, 6 Series & IHC carb 50983D &
throttle Body 6513D
(Shaft Length = 3.180")
Fits: M, MV, I6, O6, T6, W6 (distillate)
w/ IH carb 47387D & throttle body 8867DX
(3.314" throttle shaft length)
Fuel pump repair kits
Not for use w/ methanol blended gas.
IHS165 (Basic) & IHS164 (Complete) kits contain:
Diaphram, mounting gasket, fuel bowl screen & gasket.
IHS854 (Complete) kit also contains: Pivot shaft, plunger,
springs, retainers & packings.
Governor, parts cont...
Order #
Price
Internal Governor Spring
Fits: H, M series, Supers & MTA; I, O, T, W4
thru 9 series, 300, 350, 400 & 450 (All w/ gas,
LP), Replaces: 49407DBX & 357012R1
(2.700" o/a length, .110" wire dia.)
IHS878 $8.95
IHS164 (Complete) kit also contains: Diaphram shaft, pivot
shaft, plungers & springs, retainers & packings & caged
valve.
Order #
Price
IHS165
$58.50
IHS854
$64.95
IHS164
$108.95
IHS672 $29.95
Basic Kit
Fits: F12, F14, I9, I12, O12, O14, T9, W9, W12
& W14
NOTE: For Early & Late Pump.
Complete Kit
Fits: F12, F14, I9, I12, O12, O14, (W9 up to
SN: 31732), W12 & W14 NOTE: For early &
original (O.E.M.) AC replacement pump
(24527D) w/ a hair spring check valve. The
diaphram is attached onto the shaft w/ nut.
Complete Kit
Fits: F12, F14, I12, O12, O14, T9 SN:
TCBM9441 & up, W9 SN: 31733 & up, W12 &
W14
NOTE: For late AC replacement pump
(1521394 & 1539555) w/ a caged check valve.
The diaphram is peened onto the shaft.
Governor Arm (Cast Steel)
Fits: A, B, C & Supers, 100, 130, 200 & 230
Replaces: 6507DA
New & improved
International: Cooling parts
Radiators, parts
Order #
IHS249
Price
$222.99
Radiator Core
Fits: F12, F14, I - O & W 12 -14
Replaces: 27065D
(H = 19-1/2", W = 17-1/2", D = 2")
Governor, parts
Order #
Price
IHS748 $176.75
Governor Assembly fits: A, B, C & Supers, 100,
130, 140, 200, 230, 240, 330, 340, T340, T5, 404,
424, 444, 500 Crawler, 504, 2424, 2444 & some
3514 gas, Replaces: 375778R11 & 374710R1
NOTE: 33 teeth.
IHS884 $8.95
Governor Spring
Fits: A, Super A, B, 100, 130, 404
Replaces: 46944DA
(.085" wire dia., 2.088" o/a length, .560" dia.)
USA made
IHS985
Governor Spring
Fits: C, Super C, 200 & 230 (All w/ C-123
engine SN up to 65000), Replaces: 69235D
(.085" wire dia., 1.960" o/a length, .560" dia.)
USA made
$9.95
IHS816
$24.40
IHS255
$334.50
IHS805
$27.95
Mounting Gasket Pair
Replaces: 23802D
Radiator Core
Fits: Regular, F20, T20 & 10-20
Replaces: 20339D
(H = 20-1/2", W = 22", D = 2-7/8")
NOTE: Check dimensions before
ordering.
Mounting Gasket Pair
Fits: Same as IHS255;
Also fits some F30 & W30
Replaces: 10646D
Radiators, parts continue on next page
201
Radiators, parts cont...
Order #
Price
IHS449
$440.35
IHS384
(w/ wing)
$14.95
Order #
IHS188
Price
$183.75
Radiator w/ IHS188GK Gasket
(For Non-pressurized system)
Fits: Cub & Cub Lo-Boy
Replaces: 351878R92
IHS188GK
IHS301
$9.85
Mounting Gasket
Underside View
ABC125
(w/out
wing)
$9.95
Radiator Cap w/ Gasket
$9.20
Radiator
(For Pressurized system)
Fits: M, MTA & Supers, I, O & W6 series
Replaces: 357158R92
(Core dimensions:
H = 27-1/4", W = 20", D = 4")
Radiator Cap (4 PSI) w/ Gasket
Fits: Same as IHS445, IHS441, IHS449
Underside View
IHS951
$16.45
Radiator Core Bolt
Replaces: 179817 & 280345 (bolt) 103320 &
80681 (washer) NOTE: Stainless.
Kit includes: 18 bolts & 18 washers.
IHS018
$324.95
IHS890
$332.65 Radiator
IHS337
Fits: A & AV SN: 41330 & up; Super A up
to SN: 355669 B & BN SN: 40193 & up; T6
& TD6 (Both up to SN: 37982); T9 & TD9
(Both up to 57554); AV, BN, Early HV &
Early MV, Replaces: 58124D
$9.95
Underside View
IHS445
IHS441
202
Lower Radiator Housing
Replaces: 350886R11
NOTE: Has 2" upper & lower hose outlet
sizes.
$338.50 Radiator (For Pressurized system)
Fits: Late Super A SN: 356001 & up
Replaces: 358104R93
(Radiator neck on outside • Has 2" dia.
on upper & lower hose outlets)
(Core dimensions:
H = 16-1/8", W = 16", D = 2-1/8")
$399.50
Radiator
Fits: H & Supers, I4, O4, OS4, W4 & Super
Replaces: 352628R92
(Core dimensions:
H = 18", W = 16-1/4", D = 3-1/8")
Underside View
IHS989
$7.15
EACH
Radiator Hold Down Spring
Fits: Same as IHS441, IHS449 USA made
NOTE: 2 used per tractor;
Sold individually.
MIS1123
$1.80
EACH
Slotted Hex Nut
(7/16"-20 NF)
Sold individually.
IHS443
$350.95 Radiator
IHS384
$14.95
Fits: 100, 130, Super C, 200, 230
Replaces: 356356R96 & 358421R93
(Has 2-3/8" dia. on upper hose outlet
& 2" dia. on lower hose outlet)
(Core dimensions:
H = 16-1/8", W = 16", D = 2-3/4")
Underside View
IHS731
(Like
Original)
$14.95
Underside View
ABC125
(Economy)
& Wing
$9.20
& w/out Wing
Underside View
Order #
IHS583
Price
$546.50
Radiator
Fits: 140 SN: 13968 & up
Replaces: 369400R94
(H = 16-1/8")
NOTE: Will fit early SNs by purchasing
IHS723 cap.
IHS723
$14.95
Underside View
IHS442
Replaces: 393229R91, 402281R1, 532029R1
$499.95
Radiator
Fits: 300 & 350 Rowcrop gas, diesel
Replaces: 361704R93
IHS384
(w/ wing)
Radiator mounting pads
Order #
Price
IHS536
$2.00
EACH
IHS821
$14.95
EACH
IHS725
$18.50
EACH
ABC455
$2.95
EACH
$14.95
Application
Fits: A thru 884
Replaces: 18464D & 47240D
(1-1/2" O.D.)
NOTE: Sold individually.
Fits: 460, 560 & 660 Standard & Rowcrop
gas, diesel
Replaces: 369932R1
Fits: 544, 656, 664, 656, 706, 756, 766, 786, 806,
826, 856, 886, 966, 986, 1026, 1066, 1086, 1206,
1256, 1456, 1466, 1468, 1486, 1566, 1586, 4100,
4166, 4186 & Industrials Hydros: 70, 86, 100,
186 Replaces: 378710R91
NOTE: 4 used per tractor; Sold individually.
Universal Radiator Mounting Pad
(2" x 2", 1/4" thick)
Radiator caps, gaskets
Underside View
ABC125
(w/out
wing)
$9.20
Order #
IHS337
Price
$9.95
Underside View
IHS301
$9.95
Underside View
IHS989
MIS1123
$7.15
EACH
$1.80
EACH
Radiator Hold Down Spring
Fits: Same as IHS442 USA made
Sold individually.
Slotted Hex Nut
(7/16"-20 NF)
Sold individually.
Underside View
ABC1398
$5.95
Underside View
Radiator Cap
Fits: A, B, C, Super A, Early H, M, I4, I6,
I9, O4, O6, Early T6 & T9, W4, W6 & W9,
Replaces: 43983D
NOTE: Fits on inside of neck.
Radiator Cap
Fits: Cub
Replaces: 351030R91 & 400586R1
Exactly like original
(For (7 PSI) pressurized system)
Fits: Cub SN: 248125 & up (1975-79);
Also fits older Cubs when pressurized system
is desired; Will fit 154, 184 & 185, but to use
original cover must drill 2 holes in wings of cap
to mount cap to cover.
Replaces: 80889R91, 404548R1, 404684R1
(2.333" O.D., 2.000" tang to tang, 1.096" tall)
Made in England NOTE: Silver zinc.
Fits radiators w/ 3/4" tall filler neck.
Radiator caps, gaskets continue on next page
203
Radiator caps, gaskets cont...
Order #
IHS775
Price
$13.00
Radiator Cap w/ Cover
Fits: 484, 584, 684, 766, 784, 786, 884, H84, 886,
966, 986, 1066, 1086, 1466, 1468, 1486, 1566,
1568 & 1586; Hydros: 100 & 186
Replaces: 121951C1, 532672R91, 532673R1,
532674R1, 1500626C92
Exactly like original, Made in England
Radiator caps, gaskets cont...
Order #
Price
ABC1396
$8.95
Underside
View
IHS384
$14.95
Underside
View
ABC125
$9.20
Underside
View
Fits: IH Cub (1975-79) SN: 248125 & up w/
radiator 352903R92; Will also fit older Cubs
when a pressurized system is desired;
Will not fit 154, 184 & 185
Replaces: 365892R91 & D61885
(2.333" O.D., 2.000" tang to tang, 1.367" tall)
Made in England
NOTE: Fits 1" tall filler neck.
Radiator Cap w/ Wing
Fits: Super A, C, Super C, H, Super H, M, MD,
Super M, Super MD, I, O & W 4, 6, 9 series &
Supers, Some 100, 130, 140 up to SN: 13967,
200, 230, 240, 300, 330, 340, 350, 400, 450,
W400, W450, 600 & 650 gas, diesel
Replaces: 356710R91, 358105R91
& 361705R91 (2.050" radiator neck I.D.)
NOTE: Measure radiator neck I.D. before
ordering. Fits on outside of neck.
Radiator Cap w/out Wing
Replaces: 67448DD
(2.050" radiator neck I.D.)
NOTE: Replacement cap only, not like
original.
Underside
View
IHS925
$10.55
Winged Radiator Drain Cap
Fits: A thru 650 gas, diesel, Replaces: 13047DA
NOTE: Has stamped "IH". Cast iron w/ zinc
plating.
IHS922
$10.65
Winged Water Block Drain Plug
Fits: A thru 650 gas, diesel; Serviceable for
Cub & Cub Lo-Boy, Replaces: 45314DC
NOTE: Has stamped "IH" and part number.
Cast iron w/ zinc plating.
ABC209
$2.80
Radiator Drain Plug
Fits: IH models
Replaces: 534184R1
(1/4" - 18 NPT)
Radiator pipe / hoses
Order #
Price
IHS684
$29.95
FDS261
$4.50
Radiator Hose (Upper / Lower)
Fits: A, AV, (Super A up to SN: 355669), (Late
Super A SN: 356601 & up for lower hose),
B & BN Replaces: 20075DB
(2-1/4" length, 2" I.D.)
IHS184
$10.10
Radiator Hose Kit
Fits: H & Supers, I, O, W4 series
(2) - 1-1/2" I.D. x 2-1/2" long, 1-7/8" O.D.,
(1) - 1-1/4" I.D. x 2-5/16" long, 1-9/16" O.D.,
(1) - 1-3/4" I.D. x 3-1/2" long, 2-1/8" O.D
IHS130
$15.95
Radiator Hose Kit
Fits: M, MV, Early Super M w/ 3-1/2" long top
hose, W6, MD, Super MD, I6 & O6;
The following diesel only: MTA, 400, 450,
W400 & W450
(1) - 1-1/2" I.D. x 2-1/2" long, 1-7/8" O.D.,
(2) - 2" I.D. x 2-11/16" long, 2-1/4" O.D.,
(1) - 2-1/8" I.D. x 4" long, 2-9/16" O.D.
FDS261
$4.50
Radiator Hose (Lower)
Fits: 140, 240, 404, 424 gas & 444 gas
Replaces: 20075DB
(2" I.D., 2-1/4" length)
NOTE: IHS384 & ABC125 radiator caps will fit IHS441, IHS443,
IHS445 & IHS449 Radiators.
IHS731
$14.95
Underside
View
IHS723
$14.95
Underside
View
204
Radiator Cap (4 PSI)
Fits: 100, 130, 200, 230, 140 up to SN: 13967,
240, 330, 340, 460, 560, 600, 650 & 660
Replaces: 163361, 361705R91, 362323R91 &
370871R91 (2.050" radiator neck I.D.)
ordering.
Radiator Cap (4 PSI)
Fits: 140 SN: 13968 & up, 240, 340, 404, 424,
444, 454, 464, 484, 504, 544, 574, 584, 606, 656,
664, 666, 674, 684, 686, 706, 756, 784, 806, 826,
856, 884, 1026, 1206, 1256, 1456 Hydros: 70,
84, 86
Replaces: 393229R91, 402281R1, 532029R1
(1.5" radiator neck I.D.) Exactly like original
ordering.
Lower Radiator Water Pipe
Replaces: 48828D
Wittek© tower (hose) clamps
Original Style
Wittek© Tower (Hose) Clamp
Replaces: 357870R91
Order #
Price
Dimension
IHS636
$3.50
.775" - 1.013" size range
IHS637
$3.50
1.687" - 1.780" size range
IHS638
$3.75
1.815" - 2.001" size range
IHS639
$3.75
1.807" - 2.285" size range
IHS640
$3.75
2.175" - 2.500" size range
IHS641
$3.75
2.400" - 2.625" size range
IHS642
$3.75
2.350" to 2.765" size range
IHS643
$4.35
2.685" to 2.995" size range
Fan assemblies
Order #
Price
IHS143
$74.95
Fan Assembly
Fits: Cub up to SN: 165152; Serviceable for
Cub Lo-Boy, Replaces: 131489C1, 251427R91
& 251645R91 (3-1/2" pulley O.D.)
NOTE: Can be made to fit on later serial
number Cubs & Cub Lo-Boy by replacing
generator belt w/ ABC099. Has improved
sealed bearing. No need to grease!
IHS142
$81.65
Fan Assembly
Fits the following w/out water pump:
A, B, C & Super A, (F12 & F14 but
will not look like original)
Replaces: 701360R91
• Overall diameter = 15-3/4" tip to tip
• Fan pulley diameter = 4"
• Generator pulley diameter = 3-5/8"
NOTE: Has improved sealed bearing. No
need to grease!
Thermostats
Order #
Price
ABC052
$11.65
IHS913
IHS1464
$32.10
Thermostat w/ Gasket
Fits: Super A, Super C, 100, 130, 140, 200,
230, 240, 330, 340, 404, 424, 444, 504, 544,
574, 3414, 3444 & 3514 gas
(160º Lo-Temp)
NOTE: Gasket is for Ford models only.
Thermostat
Fits: H, M series, MD series & Supers, MTA,
I, O, T, W-4, 6, 9 series & Supers, 300, 350 gas,
LP only, 400, 450 & W400, W450, 560 diesel,
600, 650 gas, LP, diesel, 656 diesel, 660 diesel
& 706 diesel, Replaces: 33814DA, 261514R92,
313942R92, 317668R91 & 373634DA
(160º Temp)
IHS1466
ABC1086
Fan belts
NOTE: Verify belt size before ordering.
Order #
Price
$5.50
Thermostat Gasket only
Fits the following gas, LP, diesel: M, MD, O6
series, W9 series & Supers, 400, 450, 600, 650
Replaces: 45984DA
USA made
$11.10
ABC101
$12.15
Fits: A, Super A, B & C w/ C-113 engine
(All w/out water pumps)
Replaces: 46869D
(11/16" x 32-1/4")
ABC102
$12.80
Fits: A, B & C w/ water pump; Super A1,
Super C, 100, 130, 200 & 230
w/ C-123 engine, Replaces: 60712D
(11/16" x 35-3/8")
IHS233
$14.95
IHS134
$15.75
ABC191
$10.30
$13.25
Thermostat
Fits the following gas: 460, 560, 656, 660, 686,
706, 756, 806, 826, 856, 3616
Replaces: 108120R91
(180º Temp)
Application
ABC098
$4.95
Thermostat Gasket only
Fits: H, Super H, O4, OS4, W4, 300 & 350
Replaces: 45102D & 45102DA
USA made
Fits: Cub & Cub Lo-Boy w/ C-60 engine
Replaces: 251428R1
(11/16" x 31-1/4")
Fits: H & Supers, I, O, W4 series, 300 & 350
gas, Replaces: 48032DA
(11/16" x 38-1/4")
Fits: M & Supers, I, O, T, W6 series gas, diesel,
400 & 450, Replaces: 16131DA
(13/16" x 45-1/4")
Fits: 350 diesel & air conditioning belt for
some 3488 thru 7488 w/ 42" belt
Replaces: 366781R1, 1250587C1 (A.C.)
(33/64" x 40-3/4")
Fan belts continue on next page
205
Water pumps w/ gaskets cont...
Order #
Price
IHS189
$301.55
Water Pump (Rebuilt)
w/ Fan & Generator Pulley
Fits: M & Supers, I, O, T, W6 series gas, diesel
Replaces: 353729R92 NOTE: Improved sealed
bearing. No need to grease.
Fan belts cont...
NOTE: Verify belt size before ordering.
Order #
Price
ABC009
$10.80
ABC1648
$12.95
Application
Fits: 424, 444, 2444
(All w/ BD154 in3 diesel engine)
Replaces: 237153R1
(5/8" x 37-1/2")
IHS898
NEW! Fits: F460 gas, LP (fan/gen); F460
diesel (fan); I460 gas, LP (fan); F560 gas, LP,
diesel (fan); 606 gas, LP (fan/gen); F656 up to
SN: 23107 gas (fan); 706 gas, LP, diesel w/ 461/4" belt (gen/water pump); 806 gas, LP (fan)
Replaces: 149635R1, 403348R1 & 332562R1
(17/32 x 45-1/4")
$99.95
Water Pump (NEW not Rebuilt)
w/out Pulley fits: 140, 240, 330, 340, 404, 424,
444, 2404, 2424, 2444, T4 & T5 gas, LP
Replaces: 375793R92 & 367683R91
IHS218
$99.95
IHS759
$107.95
Water jacket covers, parts
Fits: H & Supers, I, O,
W4 series, 300 & 350 gas
IHS209 Replaces: 48461DA
IHS209GK Replaces: 45266DA
Description
Order # Price
Water Jacket Cover only....................................... IHS209.................$37.95
Gasket only............................................................. IHS209GK..........$5.95
Fits: M & Supers, I, O, T,
W6 series 400 & 450 gas
IHS210GK Replaces: 49128DA
Description
Order # Description / Application
w/out Pulley
Fits: 340 diesel; 460 gas, LP, diesel; 504 diesel;
560 gas, LP, diesel; 606 gas, LP, diesel; 656 gas,
LP, diesel; 660 gas, LP, diesel; 666 gas; 706 gas,
LP, diesel; 756 gas, LP; 766 gas; 806 gas, LP;
826 gas, LP; 856 gas, LP; Hydro 70 gas; Hydro
86 gas; Industrial: 3514 diesel, 3616 gas,
diesel; T6-62 series 6 -cyl. gas; TD-6 62 series
6-cyl diesel D282; TD-9 & TD9B 92 series
6-cyl. diesel; H25, 30 & 50 diesels; 3800 gas;
3850 gas, Replaces: 601816C92
w/out Pulley fits: 766, 966, 986, 1066, 1086,
1466, 1486, 1566, 4166, 4186, 3388, 3488, 3788,
4366, 5088, 5288, 5488, 6388, 6588, 6788 &
Hydro 186 (All w/ DT414, DT436 & DT466
engines), Replaces: 672644C95 & 673162C93
Price
Water Jacket Cover only....................................... IHS210.................$37.95
Gasket only............................................................. IHS210GK..........$5.95
NOTE: IHS210GK also works as a lifter side cover gasket.
Water pump pulley flanges, parts
Order #
Price
IHS033
$29.95
IHS921
$5.30
Water pumps w/ gaskets
Order #
Price
IHS217
$145.95
Water Pump (NEW not Rebuilt) w/ Pulley
Fits: A, B, C & Supers, 100, 130, 200 & 230
Replaces: 355760R93
IHS183
$291.75
w/ Fan & Generator Pulley
Replaces: 54148DA
206
Water Pump Pulley Flange
(1/2 Adjustable Nut)
Fits: (H & HV SN: 57532 & up) & Supers, I, O
& W4 series (SN: 1421 & up), 300 & 350 gas;
Replaces: 6598DX & 362250R11
(5-1/4" dia.)
NOTE: 2 different diameters were made,
measure before ordering. Will NOT fit early
tractors with 5" O.D. pulley (6598D).
Water Pump Pulley Drive Stud
gas, Replaces: 48029DA
(5/16" thread 1.880" long)
USA made
NOTE: Silver zinc. 2 used per tractor;
Sold individually.
International: Gauges
Water pump pulley flanges, parts cont...
Order #
Price
IHS034
$29.95
IHS1554
Fits: F-30, 15-30 SN: TG154508MB & up, W30,
W-40, WD-40, T20 SN: FM556 & up, M &
Supers, I, O, T, W6 series 400, 450 gas, diesel
Replaces: 2370D & 2370DBX
(6-1/4" dia.)
Amp gauges w/ chrome bezel
NOTE: IHS gauges have a metal base, glass lens & black
face with white letters. Includes the IH logo & part number.
ABC gauges vary from original appearance. For 2" diameter
hole.
Order #
Price
IHS527
$27.95
Amp Gauge (20-0-20) (IHC)
Fits: IH / Farmall models (1939-46)
Replaces: 42383DC
$36.95
NEW! Water Pump Packing Gland Nut
Fits the following gas, LP, diesel: M & Supers,
I, O, T, W 6 & 9, 400, 450
Replaces: 20296D USA made
NOTE: Brass.
IHS1444
$33.95
IHS924
$5.75
Fits: B250, B275, B414, 276, 354, 364, 384, 424,
434, 444, 2300A, 2424, 3414, 3444, 7000
Forklift & TD5 (All w/ BC-144, BC-144 & BD154 engines), Replaces: 703825R11
(4.975" O.D., 2.900" I.D.)
Water Pump Pulley Drive Stud
Fits: M, MD series & Supers, I, O, T, W6 thru
W450, 600 & 650 gas, diesel
Replaces: 20301D
(5/16" thread, 2.571" long)
USA made NOTE: Silver zinc. 2 used per
tractor; Sold individually.
IHS418
$27.95
Amp Gauge (20-0-20) (IH)
Fits following w/ cut out system:
IH / Farmall models (1947-50)
Replaces: 354473R91
IHS395
$27.95
ABC109
$12.25
Amp Gauge (30-0-30) (IH)
Fits following w/ voltage regulator system:
All models w/ separate amp meter including
Cub Cadets
Replaces: 360053R91, 378424R91 & 393334R1
Amp Gauge (30-0-30)
Replaces: 360053R91, 378424R91 & 393334R1
USA made NOTE: No logo.
ABC016
$12.25
Amp Gauge (20-0-20)
I
just ordered several parts from Shannon, who by
the way is very helpful and friendly. Since I was
ABC466
$15.50
not online at the time, I decided to log in and check
Amp Gauge (60-0-60) Illuminated,
Fits: IH / Farmall models w/ Alternator
NOTE: No logo.
out the parts list. I must say it is very impressive
and I really like the cross reference for part
interchangeability. It makes life a breeze knowing the
same part will fit several makes of tractors. Keep up
the good work!
IHS787
- A satisfied customer
$24.75
Charge Indicator Gauge
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568,
4366, 4386, Hydro 100
Replaces: 533990R1, 1341322C1, 84203117
207
Oil pressure gauges cont...
Order #
Price
$39.95
IHS459
$39.95
IHS454
$39.95
Oil Pressure Gauge (75 PSI) (IH)
(Dash mounted)
Fits: H, M & Supers, I, O, W4, 6 & 9 series gas;
Crawlers: T-6, T-9 & T-14
Replaces: 41934DB
NOTE: Logo is correct for 1947 & up.
IHS1666
$39.95
NEW! Oil Pressure Gauge (45 PSI)
(Dash mounted)
Fits: MD, Super MD, MDV, WD6, Super WD6,
WD9, Super WD9, (WDR9 SN: 12426 and up),
Super MTA diesel, TD6 & up; Power Units:
UD6, UD9, UD14, UD18, UD24
Replaces: 258634R91, 702027C1
IHS502
$39.95
IHS1871
$39.95
ABC004
$18.95
ABC082
$18.95
ABC005
$18.95
Glow plug meter
Fits the following diesels:
340, 460, 504, 560, 606, 656, 660, 706
Replaces: 370380R91, R92
Description
Order # Price
NEW! Glow Plug Meter........................................ IHS1538.............. $39.95
Oil pressure gauges w/ chrome bezel, parts
face w/ white letters. Includes the IH logo & part number.
hole.
Order #
Price
NOTE: Before 1955 the Oil Gauges were Zone gauges;
1955 & up they were 0-75 gauges.
IHS526
$39.95
Oil Pressure Gauge (75 PSI) (IHC)
(Engine mount)
Fits: A, B, F12, F14, F20 & F30 series
Replaces: 43987DB
IHS452
$39.95
Oil Pressure Gauge (75 PSI) (IHC)
(Dash mount)
Fits: H, M, I, O & W series (1939-1946)
Replaces: 41934DB
IHS458
$39.95
(Engine mount)
Fits: Early Cub (up to 1954)
Replaces: 31041DB
IHS771
$39.95
(Engine mount)
Fits: Cub (1955 & up)
Replaces: 364663R92
ABC1115 $14.95
12-volt Red Jewel Lens Assembly
(For 29/32" mounting hole)
Fits: Some Cub 154 SN: 14536 & up, all 185
& (will also fit early 154 by enlarging hole to
29/32"), Replaces: 544311R1 NOTE: Used as
low oil pressure warning light.
ABC343
12-volt Light Bulb (For ABC1115)
Fits: Some Cub 154 SN: 14536 & up & all 185
NOTE: G-3-1/2" miniature bayonnet base, 22
amps. Used as low oil pressure warning light
bulb.
208
$1.80
IHS530
(Engine mount)
Fits: A, B, C & Supers (1947-54)
Replaces: 43987DB
(Engine mount)
Fits: Late Cub, 100, 130, 140, 200 & 230 (1955
& up), Replaces: 364665R91, 393487R91,
528245R91 & 536967R1
(Dash mounted)
Fits: 240, 300, 330, 340, 350, 400, 450, 600, 650
gas, LP, Replaces: 362039R91
NEW! Oil Pressure Gauge (45 PSI) (IH)
(Dash mounted)
Fits the following diesels: 350, 400, 450, 600,
650; Gas, LP, diesel: 460, 560, 660; Gas, diesel:
3616, 3800, 3850
Replaces: 362177R94, 393488R91
Universal Oil Pressure Gauge (30 PSI)
(Engine mounted)
Fits: Cub, A, B, C & Supers
NOTE: No logo.
(Dash mounted)
NOTE: No logo.
(Dash mounted)
NOTE: No logo.
Oil pressure gauges cont...
Order #
Price
ABC523
$23.95
Oil Gauge Copper Line Kit
(For tractors using 1/8" x 6' copper oil line)
(6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2)
compression sleeves, (1) 1/8 - 27 NPTF female
to 5/16 - 24 UNF male adaptor
ABC538
$13.40
Oil Gauge Fitting
(For gauges w/out removable fitting)
(1/8" pipe thread to 1/8" tube) USA made
NOTE: Brass.
IHS626
$12.85
Oil Gauge Fitting
(For gauges w/out removable fitting)
(1/8" pipe thread to 1/4" tube)
NOTE: Brass.
ABC1605
$15.95
NEW! Electric Oil Pressure Switch
Fits: 154 thru 6788
Replaces: 3118643R1, 3106558R2, 3129031R91,
376855R92, 392249R92, 529796R1, 530034R2,
65425C1, 91450C1
Water temperature gauges cont...
Order #
Price
IHS531
$49.95
Water Temperature Gauge (IH)
w/ 72" Lead
Fits: C & Super C (1947-54); 200, 230, 240, 300,
330, 340 gas only, T340, (350, 400, 450, 460,
560 & 660 gas, diesel), Replaces: 353868R91,
369849R91, 393476R91, 393481R91 & 536960R2
ABC239
$27.25
Universal Water Temperature Gauge
w/ Lighting & Mounting Hardware
(100º - 280º temperature range,
90º pointer sweep, 6 ft. capillary tube)
ABC1593 $24.95
Touch control gauge
Fits: Super A, Super AV, Super C,
100, 130, 140 & 200
Replaces: 355840R91, 355841R91,
356465R91, 356466R91
Description
Order # Cluster gauges
Order #
Price
Price
IHS795
$148.95
Cluster Gauge Assembly
(Fuel & Temperature)
Fits: 544, 656, (666 & 686 diesel only), 706,
756, 806, 826, 856, 1026, 1206, 1256, 1456,
4166, 4186, Hydros: 70 & 86
Replaces: 382733R93, 396380R91, 397939R92,
539293R1 & 1546480C1
IHS1536
$148.95
NEW! Cluster Gauge Assembly
w/ Spade Terminals
Fits: 706, 806, 1206, 2706, 2806, 21206
Replaces: 382732R91,R92,R93,R94;
396380R91,R92,R93
NOTE: Must use our adapter bushing for
temperature gauge when installing.
IHS797
$148.95
Cluster Gauge Assembly
(Oil & Temperature)
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568,
4366, 4386, 4568, 4586 & Hydro 100 (All
diesel), Replaces: 534057R2 & 1546481C1
Touch Control Temperature Gauge.....................IHS525............... $79.99
w/ Right Angle 45" Lead
Water temperature gauges w/ chrome bezel,
part
face w/ white letters. Includes the IH logo & part number.
hole.
Order #
Price
IHS934
$24.95
IHS528
$49.95
IHS453
$49.95
NEW! Universal Water Temperature Gauge
w/ 60" Lead
Fits: IH/Farmall models using a zone style
gauge (2" dia., Illuminated)
NOTE: No logo.
Water Temperature Bracket
Fits: A, AV, Super A, Super AV, Super A1,
Super AV1, B, BN, 100 & 130
Replaces: 50495D & 53620D USA made
Water Temperature Gauge (IHC)
w/ 24" Lead
Fits: A, B, H, M, I, O, (W series 4-9 gas, diesel)
& T6 (1939-46)
Replaces: 63783D
Water Temperature Gauge (IH)
w/ 24" Lead
Fits: A, B, H, M & Supers, I, O, W4, 6 & 9
series gas, diesel (1947-54) & Late TD-6, 100,
130 & 140, Replaces: 67135D
Fuel sending unit
Fits: 560 & 660 (Both w/ Stewart Warner
fuel gauge only); 544 gas, 656, 666, 686, 706,
756, 766, 806, 826, 856, 966, 1026, 1066, 1206,
1256, 1456, 1466, 1468, 1566 & 1568
Hydros: 70, 86, 100, Replaces: 378427R91
(32 ohm full to 244 ohm empty) (16-1/4" deep)
Description
Order # Price
Fuel Sending Unit................................................. IHS886................ $49.95
209
Tachometers, parts
Order #
Price
IHS847
$98.65
ABC476
$49.95
ABC1822
$9.95
Fuel gauges
Fuel Pressure Gauge (80 PSI)
(Screw-In Type)
Fits: MD, MDV, Super MD, MTA series,
ID, TD, TD14, TD14A, OD, WD 6 - 9 series;
400, 450, 600 & 650 (All diesel)
Replaces: 260390R94 & 263791R92
Description
Order # Price
Fuel Pressure Gauge............................................. IHS532.................$39.95
NOTE: Gauge has a metal base, glass lens & black face w/ white
letters. Includes the IH logo & part number.
Fuel Gauge
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, Hydro 100; Calibrated correctly for 460, 560, 660 w/ Stewart Warner sender but has a different appearance
Replaces: 533992R1, H142794; Will work
for 378426R91
Description
Order # Description / Application
Tachometer
Fits: I-300 Utility & I-350 Utility gas
(Both w/ Live PTO & torque amplifier)
Replaces: 363829R91
Tachometer Drive Assembly w/ Gaskets
Fits: 350 Row Crop diesel
Replaces: 367150R91
NOTE: Driven off the generator.
14 & 43 tooth gears.
NEW! 2-Piece Tachometer Drive Gasket Kit
Fits: 350 diesel
Replaces: 368118R1, 817220 USA made
IHS940
$50.40
Tachometer
Fits: 340 gas
Replaces: 371243R92
Price
NEW! Fuel Gauge.................................................. IHS791................ $39.95
Air cleaner change gauge
IHS849
$124.95
IHS1500
$174.95
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568,
4366, 4386, 4568, 4586, Hydro 100
Replaces: 397942R91, 533991R1, 536230R1,
1341364C1
Description
Order # Price
Air Cleaner Change Indicator / Gauge.............. IHS789................ $34.75
NEW! Tachometer
Fits the following diesels: 400, 450, W400,
W450, Replaces: 364395R91
Instrument panel housings
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568
& Hydro 100
Replaces: 531038R1
Description
Order # Price
IHS853
$39.95
IHS753
$74.95
IHS768
$74.95
Instrument Panel Housing................................... IHS792................ $85.00
NOTE: Cast Aluminum.
IHS1261
IHS1264
Description
Fits following w/out cabs: 385, 395, 484,
485, 584, 585, 684, 685, 784, 785, 884, 885
(All thru 1985); 595, 695 & 895
Also fits the following if notched:
4210, 4230 & 4240
IHS1261 Replaces: 3121637R1, R3
IHS1264 Replaces: 3121638R1, R3
USA made
Order # Price
LH Instrument Panel Side Housing................... IHS1261.............. $69.25
RH Instrument Panel Side Housing................... IHS1264.............. $68.95
NOTE: Parts are coated with a wax release agent. You must wet sand
with fine sand paper before painting.
210
Tachometer
Fits: 400, 450, W400, W450 (gas, LP only);
Serviceable for F300, F350 gas, LP, diesel
Replaces: 364393R91
NOTE: Serviceable: the RPM will read
right, the PTO & ground speed is in a
different location.
Tachometer Mounting Bracket
Fits: F300, F350, 400, 450, W400 & W450
gas, LP, diesel
Replaces: 364376R1
Tachometer
Fits: 424, 444, 2424 & 2444 gas
Replaces: 388893R91
NOTE: Clockwise rotation.
Tachometer fits: 454, 464, 484, Hydro 574,
584, 674, 684, 784, 785, 884, 885, H84, 2400
& (Hydro 2500A SN: 100001 & up) gas,
diesel, Replaces: 3121926R91, 3125106R92 &
66455C1 NOTE: Clockwise rotation.
Tachometers, parts cont...
Order #
IHS176
Price
$99.00
IHS907
$148.50
IHS909
$224.95
IHS175B
$99.00
IHS175W
$99.00
IHS765
$149.95
IHS697
FDS423
IHS256
$28.95
$14.95
Tachometer
Fits: 460 & 560 gas, diesel
Replaces: 383092R91, 383093R91 &
375679R91
Tachometer Fits: 544 & 656 Rowcrop
w/ Gear Drive & w/ T.A. gas, diesel
Replaces: 103153A1, 389973R91 &
401841R91
NOTE: Has single light hole in rear.
Tachometers, parts cont...
Order #
Price
IHS1834
$34.95
IHS248
$28.95
IHS1840
$29.95
IHS1289
(Nylon
sheath)
$24.95
Tachometer fits the following w/ Hydro
transmission: 544, 656, 666, 826, 966, 1026 &
1066; Hydros: 70, 86 & 100
Replaces: 398957R1, 402033R1, 534055R1 &
65324C1
Tachometer w/ Black Face
Fits: 706, 806 & 1206
Industrials: 2706, 2806 & 21206
Replaces: 66748C1, 388588R91 &
388589R91
Tachometer w/ White Face
Fits: 756, 766 gas up to SN: 10934, 826, 856,
1256, 1456, 2756, 2856, 21256 & 21456
Replaces: 66748C1, 388589R91 & 398095R91
Tachometer w/ Knob
Fits: 766 diesel, Early 786, Early 886, 966 w/
Gear Drive, 986, 1066 w/ Gear Drive, 1086,
1466 w/ Gear Drive & Early 1486
Replaces: 67679C2, 103151A1, 107368C3 &
84212503
Tachometer Cable w/ Metal Sheath
Fits Farmalls 300, 350, 460 (All Rowcrops)
gas, diesel; (I-706 gas, up to SN: 5273),
(F-706 up to SN: 32236) Early 282 diesel
engines, Replaces: 364375R91, 393326R91
(61-1/4" long)
Fits: Farmalls 240, I-300, 330, 340 & 504 gas;
I-350 gas, diesel, IH 404, 424, 444, 2424 &
2444 gas, Replaces: 150938R91 & 363811R92
(48" long)
IHS1255
(Metal
sheath)
$29.95
IHS1788
$26.95
$42.99
Fits: Farmalls 400 & 450 gas, diesel
Replaces: 364396R91
(66-3/8" long)
NEW! Speedometer Drive Cable
w/ Nylon Sheath
Fits the following Hydros: Farmall 70, 86,
544, 656, 666 gas, LP, diesel
Replaces: 398955R93
(45-1/8" long) NOTE: Has small fittings on
both ends.
Fits: I544 diesel, 560 & 660 gas, diesel, 886
w/ D360 engine, 986, 1086, 1468, 1486, 1568,
3688 & 3688 HC, Replaces: 371245R91 &
401830R92
(63" long)
NEW! Tachometer/Speedometer Drive
Cable w/ Nylon Sheath
Fits as a tachometer cable for the following
w/ distributor ignition: Cub SN: 192113 &
up, Cub Lo-Boy - all, I340 gas, I460 gas, LP,
diesel, I504 gas, F504 diesel, 606 gas, LP,
diesel
Fits as a speedometer drive cable for the
following Hydros: 100, 826, 966, 1026
Replaces: 370197R91, 397016R92
(43" long)
Tachometer Cable w/ Nylon or Metal
Sheath
Fits: 666 w/ D-310 engine, 766, 806, 856,
1026, 1206, 1256, 1456, 3088, 3288, 4166, 4186
& 4366, Replaces: 384845R92, 387916R91 &
393328R91, R92, R93
(80" long)
NEW! Tachometer Cable w/ Nylon Sheath
Fits the following diesels: 706 w/ D310
engine, 756, 826, 966, 1066, 1466, 1566,
Hydro 100, Replaces: 396386R93
(87" long)
211
International: Electrical parts
Battery boxes, parts
Order #
IHS080
Price
$88.50
Battery Box w/ Lid & Hardware
Replaces: 538609R2 (box), 351336R12 (lid)
(Inside: 7-3/16" wide, 8-1/2" tall, 9-1/4" long)
Electrical outlet socket, part
(For Implements w/ Lights)
Serviceable for IH / Farmall models
Description
Order # Price
Electrical Outlet Socket........................................ ABC395.............. $24.95
(2-Pin Type)
IHS080L
IHS080H
IHS080F
IHS080 components
The following parts (Sold separately) are components of
Auxiliary Male 2-Pin Connector Plug
(For ABC395)
Replaces: 364559R91
Description
Order # IHS080 Battery Box w/ Lid & Hardware:
Price
NEW! Connector Plug........................................... ABC1868.............$19.95
NOTE: Plated brass pins.
(Heavy Duty; Straight terminals
(unless otherwised noted)
EO = Eyelet Opening
L = Length
Price
Price
IHS080L
$18.00
Lid only
IHS080F
$18.00
Front only
IHS080H
$6.50
Hardware only
IHS225B
Battery cables
Order #
Order #
Description
$128.50 Battery Box w/ IHS225LR Lid & Hardware
Fits: A, B & BN
Replaces: 50943D (box) & 50943DX
(box w/ lid)
(Inside: 7-1/8" wide, 9" tall, 9" long)
(IHS225LR Lid has retainers & rubber
bushings, bolts on front & rear. RH clips
point straight down, LH front clip points
forward & LH rear clip points backward.
Bolts down w/ 2 bolts).
Restoration quality
Specifications
Ground Cables (Non-Insulated)
ABC401
$13.90
(2 Gauge, EO = 7/16", L = 6")
ABC411
$15.80
(2 Gauge, EO = 7/16", L = 9")
ABC405
$17.45
(2 Gauge, EO = 1/2", L = 13")
ABC1175
$16.45
(2 Gauge, EO = 7/16", L = 14")
ABC421
$20.35
(2 Gauge, EO = 3/8", L = 19")
IHS225B components
ABC403
$22.85
(2 Gauge, EO = 7/16", L = 24")
IHS225LR
Insulated Battery Cables
IHS225B Battery Box w/ Lid & Hardware:
ABC407
$16.85
(2 Gauge, EO = 3/8", L = 10-1/2")
ABC415
$13.75
(2 Gauge, EO = 3/8", L = 12")
ABC413
$19.15
(2 Gauge, EO = 3/8", 90º terminal ends,
L = 14-1/2")
ABC1582
$12.15
NEW! (2 Gauge, EO=3/8", EYELET BOTH
ENDS, L=16-1/4")
ABC417
$17.15
(2 Gauge, EO = 3/8", L = 21")
ABC419
$19.95
(2 Gauge, EO = 3/8", L = 27")
Battery cable clip
Fits: All Cubs
Replaces: 351929R1 & 363504R1
USA made
Description
Order # Order #
Price
IHS225LR
$39.95
Lid only w/ Retainers & Rubber Bushings
IHS691
$3.95
EACH
Hardware (T-Bolt) only
Replaces: 50939DA
IHS082
Fits: C, (Super A up to SN: 348643)
& Super C up to SN: 176522
IHS082 Replaces: 358544R91 & 350634R91
(Inside: 7-1/8" wide, 8-3/4" tall,
9" long; bolts down w/ 4 bolts)
Restoration quality
IHS516
Description
Price
Battery Cable Hold Down Clip........................... IHS496................... $10.85
212
IHS691
Description
Order # Price
Battery Box w/ Lid.................................................. IHS082.................$96.00
NOTE: Powder coat red.
Battery Box Lid w/ Retainers............................... IHS516.................$40.95
& rubber bushings
Battery boxes, parts cont...
Order #
Price
IHS520
$153.80
IHS516
4-Piece Battery Box Assembly
(Top, LH, RH & Front covers)
Fits: Super A SN: 348644 & up, Super C
SN: 176523 & up, 100, 130, 140, 200 & 230
Replaces: 350637R92, 358540R11,
358541R11 & 358542R11
Restoration quality
NOTE: Powder coat red. Can replace
IHS082 for easier battery access.
IHS691
IHS517
IHS518
IHS519
IHS520 components
Price
IHS516
$40.95
Replaces: 350637R92
IHS691
$3.95
EACH
Hardware (T-Bolt) only
IHS517
$49.95
LH Battery Box Side Cover w/ Clips & T-Bolt
Replaces: 358540R11
IHS518
$49.95
RH Battery Box Side Cover w/ Clips & T-Bolt
Replaces: 358541R11
IHS519
$21.00
Battery Box Front Cover, Replaces: 358542R11
IHS081
$88.50
Order # Price
T-Bolt........................................................................ IHS691.................$3.95
Fits: Super H SN: 19234 & up
Replaces: 359500R91
(7-5/8" wide, 9-1/2" tall, 14-7/8" long)
Restoration quality
Description
Order # Price
Battery Box w/out Imprint................................... IHS079AH..........$110.95
NOTE: Mounts under seat. Powder coat red.
Description
IHS084
$96.75
Battery Box w/ Lid
Fits: M, MD, (Super M up to SN: 28174),
I, O, W6 series (All under tank)
IHS084L only fits: W9, SW-6, WD-9, WR-9,
WDR-9; 600 & 650 diesel only
(Inside: 7-3/16" wide, 9-1/8" tall, 11-3/4"
long)
Replaces: 51712D Restoration quality
NOTE: Battery box mounts under gas tank.
Powder coat red.
IHS084L
Battery Box w/ Lid
Fits: H, Super H up to SN: 19233, O & W4
series, Replaces: 51680DB
(Inside: 7-1/4" wide, 8-3/4" tall, 9" long)
Restoration quality
IHS081L
Fits: Super A, C, Super C, 100, 130, 140, 200, 230 (All using OEM Battery boxes w/ lids)
Replaces: 50939DX
Description
IHS520 4-Piece Battery Box Assembly:
Order #
IHS802
IHS084 components
IHS084 Battery Box w/ Lid:
Order #
Price
IHS084L
$38.95
Replaces: 51707D & 51713DBX
IHS802
$4.95
Battery Box Support Lock Bolt
NOTE: 2 bolts used per tractor; Sold
individually.
IHS920
Description
IHS081 components
IHS081 Battery Box w/ Lid:
Order #
Price
IHS081L
$39.95
Description
NOTE: Mounts under gas tank.
IHS920
$5.30
Battery Box Support Lock Bolt
Replaces: 52898D
(7/16 x 20 NF, 1.220" o/a length) USA made
NOTE: Silver zinc. 2 used per tractor;
Sold individually.
Fits: Super M SN: 28175 & up gas, diesel
& Super MTA series
Replaces: 358693R91
(7-5/8" wide, 9-1/2" tall, 14-7/8" long)
Restoration quality
Description
Order # Price
Battery Box w/out Imprint................................... IHS079AM......... $110.95
NOTE: Mounts under seat. Powder coat red.
Battery boxes, parts continue on next page
213
Fits: F350 & 450; Will fit F300 & F400,
but rear light on opposite side
Replaces: 362059R92
(8" wide, 9-1/2" tall, 15" long)
Restoration quality
Description
Order # Order # ABC365
Price
(For Battery Box Lid)
ABC365 Replaces: 51690D
ABC363 Replaces: 51689D
IHS721 Replaces: 393161R1 & 198185A1
Price
Fits: 454, 464, 574, 674,
Industrial: 2400 & 2500
Replaces: 401933R1 & 3113425R1
USA made
Description
Battery Lid w/ Hold Down.................................. IHS862................ $119.80
NOTE: Must be trimmed for power steering tractors.
Order # Battery Door............................................................ IHS1276.............. $92.70
NOTE: Fiberglass like original. Parts are gel coated with a wax release
agent on surface. We recommend a wet sand w/ fine paper prior to
painting. The release will not allow paint to adhere. Does not include
the mounting screws.
Price
Fits: 300, 330 & 350 Utilities gas
(All w/ manual steering)
Replaces: 362489R93 & 358277R2
Description
Fits: 385, 484, 485, 584, 585, 684, 685, 784, 785, 884 & 885 (all thru 1985); 395, 495, 595 & 695
Replaces: 1536764C1 & 3121393R91
(15-5/8" wide x 18-5/16" long)
USA made
Description
Battery Box w/ Imprint on End........................... IHS079B............. $110.95
NOTE: Mounts under seat. Rear light mounts to LEFT side of box.
Powder coat red.
Order # Price
Battery Door............................................................ IHS1279.............. $92.70
NOTE: Fiberglass like original. Parts are gel coated with a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere.
Fits: 354, 364, 384, 385, 454, 464, 484, 574, 584, 664, 674, 684, 784, 884, Hydro 84, 2300A, 2400A, 2500A
Replaces: 376787R1 (retainer); 3112170R11,
377521R1,3 & 389872R1 (screw);
(5/16"-18 x 3/4", 1.100" o/a length,
.775" dia. head)
USA made
Description
Order # Price
NEW! Slotted Thumb Screw w/ Retainer.......... IHS1557.............. $10.65
NOTE: Retains battery door. 2 used per tractor; Sold individually.
ABC363
Description
ABC364
IHS721
Order # Price
Rubber Bushing (.800" tall).................................. ABC365.............. $4.25
Rubber Bushing (1.291" tall)................................ ABC363.............. $5.00
Rubber Bushing Retainer.................................... ABC364.............. $3.75
J-Bolt, pair............................................................... IHS721................ $7.95
Fits: 454, 464, 574 & 674
Industrials: 2400 & 2500
Replaces: 401933R & 3113425R1
(20-3/8" long, 15-3/8" wide)
New & improved steel
USA made
Description
Fits: Cub, Cub Lo-Boy, A, B, H, M,
Super H, Super M & MTA, O & W series,
(300, 350, 400 & 450 as light wire &
accessory grommet, 2 used per box)
Replaces: 24179D, 52118D & 248-1146
Description
Order # Price
Battery Box Cable Grommet................................ IHS911................ $2.00
Order # Price
Metal Battery Door................................................ IHS778................ $85.65
NOTE: Replaces the fiberglass door.
Fits: 544 & 656; Serviceable for 666, 686,
Hydro 70 & Hydro 86 gas, diesel
(All w/ under the dash mounted battery)
Replaces: 388219R1 & 538585R1
USA made
Description
Order # Price
Battery Cover.......................................................... IHS859................ $84.80
NOTE: Primed metal. For serviceable models must trim cover (too tall)
to fit.
214
IHS230
IHS721
IHS868
IHS864
IHS870
Fits: IH 706, 756, 766, 806, (826 w/ gear drive),
856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566 & 1568
IHS230 Replaces: 71711C91
Wiring harness kits cont...
IHS721 Replaces: 393161R1 & 198185A1
Order #
Price
Application
IHS868 Replaces: 399046R1,
Will work for 399048R1
IHS481 $163.35
IHS870 Replaces: 399047R1,
(For 6-volt systems only)
Will work for 399055R1
Fits: A, Super A up to SN: 354198, B & BN
IHS864 Replaces: 380409R91 & 403529R1
(All w/ cut-out relay)
IHS866 Replaces: 384491R91 & 403530R1
IHS484
$176.65
IHS482
$159.95
IHS866
Description
Order # Price
Battery Cover.......................................................... IHS230................ $26.50
J-Bolt, Pair............................................................... IHS721................ $7.95
LH Battery Tray USA made.................................. IHS868................ $63.95
RH Battery Tray USA made................................. IHS870................ $63.95
NOTE: Use IHS868 & IHS870 w/ heavy duty battery (5" wide) group
4EH.
Fits: C & Super C
(All w/ cut-out relay)
LH Battery Tray USA made.................................. IHS864................ $63.95
RH Battery Tray USA made................................. IHS866................ $63.95
NOTE: Use IHS864 & IHS866 w/ light duty battery (4-1/4" wide) group
3EH.
Wiring harness kits - USA made
For tractors w/ GENERATORS not alternator. Cloth covered
IHS971
$163.35
Fits: C & Super C
(All w/ regulator)
IHS904
$189.95
IHS906
$199.95
like original! Includes wiring instructions & light wires.
Additional kits available! Call for a quote.
NOTE: Cut-out relay has two terminals on one side & one terminal
on the other side. Regulator has three terminals on one side & one
terminal on the other side or bottom.
Order #
IHS893
IHS895
IHS891
Price
$149.95 (For 6-volt systems only)
IHS480
$189.95
Fits: Cub SN: 115403 - 165152
w/ voltage regulator
Replaces: 354252R91
NOTE: 7 main harness wires + 6 separate
wires = 13 wires
IHS488
$189.95
Fits: Cub SN: 165153 - 210000
w/ voltage regulator, Replaces: 363507R91;
Cub Lo-Boy up to SN: 10000 NOTE: Has 2
wires leading to headlights. 8 main harness
wires + 7 separate wires = 15 wires
IHS483
$178.95
Fits: H up to SN: 350953
w/ cut-out on top of generator
Fits: H SN: 350954 & up
w/ regulator under fuel tank
Application
Fits: Cub SN: 501 - 115402 w/ cut-out relay
Replaces: 351325R91
NOTE: 5 main harness wires + 6 separate
wires = 11 wires.
Fits: A & A1 when equipped w/ regulator,
Super A SN: 354199 & up, B & BN (All w/
regulator) NOTE: Will fit A, early Super A, B
& BN if converted to regulator.
Fits: H when converted to regulator on
generator
Fits: Super H up to SN: 19233
w/ battery under tank
NOTE: IHS895 & IHS891 will interchange. The only difference is
IHS891 has 2 separate wires for headlights & the IHS895 has a single
wire to the headlights.
$198.00
Fits: Super H SN: 19234 & up
w/ battery under seat
Wiring harness kits continue on next page
215
Price
IHS908
$189.95
Application
Fits: M up to SN: 229910
w/ cut-out on the generator
IHS485
IHS486
IHS487
$184.65
$205.35
Fits: Cub, Cub Lo-Boy, 154, 184, 185, A, B, C, H, M & Supers, I, O W-4, 6, 9 series, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 606, 650, 656, 660, 664, 666, 674, 686, 706, 756, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2424, 2444, 2500A,
2606, 4100, 4156, 4166, 4186, 4366, 4386, 4568 & 4586; Hydros: 70, 86, 100
Replaces: 354232R91, 365515R91, 376852R91
Wiring harness kits cont...
Order #
Fuse holder
Description
Order # Price
Fuse Holder..............................................................ABC389.............. $10.95
NOTE: Rated at 20 AMP) Fits in 1/2" hole.
Fits: M when converted to regulator on
generator
Fits: Farmall M SN: 229911 & up, Super M up
to SN: F28174 & up to SN: L504801 gas
w/ battery & regulator under fuel tank
Transmission pressure switch
Fits: 154 thru 6788
Replaces: 3118643R1, 3106558R2, 3129031R91, 376855R92, 392249R92, 529796R1, 530034R2, 65425C1, 91450C1
Description
Order # Price
NEW! Transmission Pressure Switch..................ABC1605............ $15.95
Fits: Farmall Super M & MTA
SN: F28175 & up & SN: L504802 & up
w/ battery under the seat
NOTE: Wires will be too short for the Early
Super M.
Ignition parts
Order #
Price
Coils / Resistors
IHS234
(6-volt)
$54.95
Wiring harness grommet
Fits: A, B, C, H, M & Supers, I,
O & W4, 6, 9 series gas, diesel
Replaces: 52062D
Description
Order # Price
IHS237
(12-volt)
$54.95
IHS842
$16.25
ABC011
(6-volt)
$19.95
Wiring Harness Grommet.................................... IHS843................ $3.95
NOTE: Mounts in amp box.
Cigarette lighters
Fits: 154 thru 574, 606 thru 1586, 3088 thru 7488, Hydros 70 thru 186, Cub Cadets 71 thru
127, Replaces: 1250545C1, 1265632C91, 378338R91, 378339R91, 378781R91, 382671R91, 382672R91, 393699R91 (1.329" knob O.D.)
Description
Order # Fits: 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, W400, W450 (All w/ 12-volt system)
Replaces: 362000R91, 367904R91
Description
Order # Distributor Coil (O.E.M style)
NOTE: IHS237 requires external resistor.
Coil Bracket (For O.E.M style)
Fits: A thru 450 using O.E.M style coil,
NOTE: Will fit IHS234 & IHS237 coils.
Price
NEW! Cigarette Lighter w/ Socket......................IHS1784............. $24.95
ABC509
(12-volt)
$19.95
Distributor Coil w/ Mounting Bracket
Fits: IH models
ABC011 Replaces: 1115379 & D502
ABC509 Replaces: 1115380, 1115381 & U505
NOTE: ABC509 internally resisted.
Price
Cigarette Lighter w/ Socket..................................IHS949............... $29.95
NOTE: Anodized aluminum knob imprinted w/ the word "lighter."
216
Ignition parts cont...
Order #
Price
Coils / Resistors cont...
ABC348
$57.10
Ignition parts cont...
"HOT" Coil (55000-Volts)
Fits: 12-volt systems
NOTE: Maximum voltage for faster starting,
reduced plug fouling & longer plug life.
Must use w/ ABC366 resistor.
ABC366
$7.75
Order #
IHS1432
IHS1428
IHS799
FDS149
ACS228
$36.50
$42.75
$42.75
$19.95
$14.15
Universal 12-volt Voltage Resistor
(2-Terminal Style)
NOTE: Used to step down 12-volt battery.
Limits voltage to coil when using 12-volt
battery. 1.5 OHMs on 6-volt battery to 4.0
OHMs for 12-volt battery. Resistor gets very
hot.
$15.95
$19.85
ACS309
$29.95
ABC324
Spark Plug Wiring Set
Fits the following w/ F4 magneto: Regular,
F20, F30, T20 & 10-20 USA made
NOTE: For models listed that include push
in terminals on magento cap. Cotton braided
wires w/ ring terminals. Tailored; copper
core. Like original.
Spark Plug Wiring Set w/ 90° Boots
Fits: 6-cyl. models
USA made
NOTE: Cut to length. Carbon core.
Spark Plug Cable Loom Bracket
Serviceable for Cub, Cub Lo-Boy 154, 184 &
185, Replaces: 251426R1
USA made
$4.55
Fits: Cub, Cub Lo-Boy, A, B, C, H, M &
Supers, I, O, T, W-4 & 6 series, 100, 130, 140,
154, 184, 185, 200, 230, 240, 300, 330, 340, 350,
400, 404, 424, 444, 450, 454, 460, 464, 504, 544,
574, 674, 2400, 2424, 2444, 2500, 3500 & 3514
ABC324 specifications: 18 mm thread, 1/2" reach, 7/8" hex,
Autolite 3116, Plug Gap .025
ABC169
$6.65
Fits: F12, F14, F20, F30, O12, O14, W12, W14,
W30, W40, WK-40, Fairway 12 & 14, W9,
WR9, WR9S, 10-20, 15-30 & 22-36
Fits the following w/ E4A magneto: Regular,
F20, F30, T20 & 10-20 USA made
NOTE: For models listed that use threaded
style terminals on magento cap. Cotton
braided wires w/ ring terminals. Tailored;
copper core. Like original.
ABC169 specifications 7/8" thread, 5/8" reach, 15/16" hex,
ABC170
$3.90
Fits: 560, 606, 656, 660, 666, 686, 706, 756, 766,
806, 826, 856, 3616, Hydro 70, Hydro 86, T4,
T5 & T340; 500 & 600 Crawlers
Fits: Cub, A, B, C, H, M & Supers, I, O, T, W-4,
6 series gas, diesel, 100 thru 504 series
(All w/ Distributor or Magneto)
Replaces: 352951R91, 356689R92 & 407487R1
USA made NOTE: Pre-assembled. Tailored;
copper core, waterproof neoprene.
Spark Plug Wiring Set w/ Straight Boots
Fits: 4-cyl. models except F12, I12, W12, O12,
F14, O14 & W14 USA made
NOTE: Cut to length. Copper core,
waterproof neoprene.
ABC326
Spark plugs (Autolite)
NOTE: Check spark plug specifications before ordering as some
models may use more than one type.
Fits: F12, I12, W12, O12, F14, O14 & W14
USA made NOTE: Cotton braided wires
w/ ring terminals. Tailored; copper core.
Like original.
Spark Plug Wiring Set w/ 90° Boots
Fits: 4-cyl. models except F12, I12, W12, O12,
F14, O14 & W14 USA made
NOTE: Cut to length. Copper core.
Spark plug wiring sets cont...
Spark plug wiring sets
IHS801
Price
ABC170 specifications: 18 mm thread, 1/2" reach, 7/8" hex,
Glow plug
Fits: 340, 460, 504, 560, 606, 656, 660,
(706 w/ D-282 in3); Industrials: TD340,
3514, 3616, 3800, 3850, TD-6 (62 series),
TD9 (92 series), TD9B (All w/ D166, 188,
236, 282, 301 in3 diesel engines)
Replaces: 304131R3, 343894R1, 343977R1
Description
Order # Price
NEW! Glow Plug................................................... IHS1604.............. $18.95
217
4-cylinder distributor parts
Price
IHS988
$7.15
Terminal Screw
(For IH Distributors)
IHS1294
$3.50
Distributor Insulating Terminal Washer
(For IH Distributors)
IHS974
$4.50
Spring Anchor Terminal Insulator
Replaces: 353906R1
IHS763
$12.00
Dust Cover w/ Gasket
Replaces: 353900R11
IHS703
$5.65
Rotor Button
Replaces: 353896R91
IHS370
$31.35
Ignition Tune-up Kit
(18 MM, 1/2" reach, 7/8" hex spark plug,
Battery Ignition - 1939 thru 62)
(Rotor, points, condensor, spark plugs & gap
gauge)
IHS846
$17.84
Distributors, parts
Fits: A thru 504 series, 2404 thru 3514 gas, LP,
I, O, T, W4 thru 6 series
Replaces Casting# 353898R11
Description
Order # Price
NEW! Horizontal Distributor.............................. IHS1716.............. $294.95
NOTE: Not correct for Cub or 9 series. Does not include base or
tachometer drive.
its: Cub, Cub Lo-Boys 154, 184, 185, A, B, C, H, M & Supers,
F
I, O, T, W-4, 6, 9 series gas, diesel, 100, 130, 140, 200, 230, 240,
300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600 & 650 (4-cyl.);
Industrials: 500 Crawler, T5, T340, TD14 & TD14A
IHS766
IHS815
IHS739
IHS737
IHS1294
IHS974
cont...
Order #
Description
(Rotor, point set, condensor & feeler gauge)
ABC121
IHS988
IHS763
its: 460, 560, 606, 656, 660, 706, 756, 806, 826, 856 & 3616
F
& most 6 cyl. gas Combines w/ clip held cap.
NOTE: Will not fit Delco or Prestolite.
IHS763
IHS703
IHS947
IHS848
For the above tractors using IH - Horizontal Distributor:
IHS703
IHS370
IHS846
For the above tractors using IH 353898R11 - Horizontal
Distributor:
Order #
Price
Description
IHS766
$29.95
Drive Gear
Replaces: 353902R1 & 531461R1
IHS815
$28.95
Drive Shaft
Replaces: 353934R11
ABC121
$8.95
Cap
Replaces: 351693R92
IHS739
$12.50
Cap Spring Clip
Replaces: 353894R1 & 107384C1
IHS737
$7.50
Cap Spring Clip Bracket w/ Screw
& Lock Washer, Replaces: 353895R1 (bracket),
121832 (screw) & 107386C1
(Screw size: 8-32 x 3/8")
218
Order #
Price
Description
IHS763
$12.00
Replaces: 353900R11
IHS703
$5.65
Rotor Button
Replaces: 353896R91
IHS947
$10.65
Distributor Cap
Replaces: 368062R91
IHS848
$25.90
(Rotor, point set, condensor & gap gauge)
S
ales: The part arrived here and is installed!
Thanks for your services. - A satisfied customer
Some A, B, C, H, M & Supers, I, O, T, W4 & W6 series gas, LP
only
WICO magneto, parts
ABC498
ABC488L
ABC500
ABC276
ABC186
ABC514
XH1344
$414.50
MAG6
$14.50
ABC018
WICO Magneto (Model XH1344)
Fits: A, B, C, H, M & Supers, I, O, T,
W-4, 6, 9 series, 100, 130, 200, 230,
300, 350, 400, 450, 600 & 650 gas
Power Units: U2 to U6 gas
(Clockwise rotation)
Instructions & Parts List (1959)
WICO XH & XHD Magneto Service
ABC556
Delco conversion distributor parts
For the above tractors using Delco 1111411 - Vertical
Distributor w/ round insulating terminal:
Order #
Price
ABC511
ABC520
ABC488S
Order #
FXH2100B
FXH2024
FXH2403
FXG2002A-2
Order #
Price
Description
FXH2100B
$22.45
Points
$15.25
Condensor
FXH2403
$57.50
Coil
Description
ABC498
$14.95
Terminal Insulator Assembly
NOTE: Fits Delco distributor housings only
w/ .345" diameter round hole.
FXH2024
ABC500
$14.95
Terminal Insulator Assembly
NOTE: Fits Delco distributor housings only
w/ .300" diameter round hole.
FXG2002A-2
$60.15
Cap
FXG1008
$33.95
Rotor
ABC556
$2.50
Mounting Gasket
$9.35
ABC488L
(31/32"
Bracket)
$14.95
ABC488S
(11/16"
Bracket)
ABC511
(6-volt)
ABC514
(12-volt)
Distributor Cap
NOTE: Fits Delco only.
Distributor Cap Spring Clip w/ Bracket
(2-1/4" o/a length)
$14.95
Fits: A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 thru TD14 series,
100, 130, 200, 230, 300, 350, 400, 450, 600 & 650
Power units: U2 to UD14
F4 COIL
$14.45
ABC520
$4.95
Rotor Button NOTE: Fits Delco only.
ABC186
$9.80
ABC018
$9.70
Ignition Tune-Up Kit
(Rotor, points, condensor & gap gauge)
ABC556
IHC H4 magneto parts
F4
CONDENSOR
Distributor Tag w/ (2) Rivets
(For Delco Remy Distributor)
Fits: Tractors & Industrial
(2.5" o/a length, .800" wide, .150" diameter
$14.45
rivet hole, 2" c.c. rivet holes)
USA made w/ raised letters.
NOTE: Customer must stamp numbers.
$2.50
Distributor Mounting Gasket
Replaces: 55780DD & 55780DE
ABC556
The following parts will fit the XH1344 Magneto:
Price
ABC276
FXG1008
ABC486
ABC122
ABC120
ABC482
ABC556
The following parts will fit the IHC H4 Magneto:
Order #
Price
F4
CONDENSOR
$14.65
F4COIL
$65.15
Coil
ABC122
$20.70
Cap, Replaces: 47413DYC
ABC482
$27.00
Coil Cover, Replaces: 47449DAY
ABC486
$8.95
Gasket Set
ABC120
$24.25
Ignition Tune-Up Kit
(Rotor, points, condensor & gap gauge)
ABC556
$2.50
Mounting Gasket
Description
Condensor
219
IHC J4 magneto parts cont...
Order #
IHC F4 & F6 magneto parts
Fits: F-12, I-12, W-12, O-12, F-14, W-14, F-20, F-30, 10-20, T-20,
some 15-30, some 22-36 & W-40; some I, O, T, W4 thru 9 series;
Industrials: TD6 thru TD18
F4 POINTS
F4 COIL
ABC486
F4 CONDENSOR
ABC556
Price
J4
CONDENSOR
$7.95
Condensor
Fits: J4 magneto SN: 81411 & up
Replaces: 353903R92
J4 COIL
$76.10
Coil, Replaces: 352355R91
ABC121
$8.95
Cap, Replaces: 351693R92
IHS1492
$49.95
Top Cover / Coil Cover
Replaces: 251502R11
J4 ROTOR
$65.95
Rotor, Replaces: 351692R91
IHS1166
$13.90
J4 Magneto Gasket Set
IHS988
$7.15
Terminal Screw
NOTE: Zinc-plated.
IHS974
$4.50
Insulator
Replaces: 353906R1
IHS1294
$3.50
Insulating Terminal Washer
The following parts will fit the IHC F4 & F6 Magneto:
Order #
Price
Description
F4 POINTS
$20.75 Points, Replaces: 21367D
F4COIL
$65.15 Coil, Replaces: 21401D, 21401DAX &
57926DX
F4
$14.65 Condensor, Replaces: 21401D, 21401DAX
CONDENSOR
& 57926DX
ABC486
$8.95
Magneto Gasket Set
ABC556
$2.50
Mounting Gasket
IHC J4 magneto parts
J4POINTS
F4
CONDENSOR
J4 COIL
ABC121
IHS988
IHS974
J4
CONDENSOR
IHS1492
Starters, parts
Order #
Price
IHS238
$174.95
ABC458
$39.50
ABC507
$23.95
IHS1166
J4 ROTOR
6-volt Starter w/ Drive (Bendix)
Fits: Super A series, C, Super C, 100, 130, 140
up to SN: 26800, 200 & 230
Replaces: 1107067, 1107093 & 1108096
NOTE: Brass pad is toward rear of starter.
Starter Drive (Bendix)
Fits: A, B, C, H, M & Supers, I, O, T, W - 4,
6 series gas (except T6), 100, 130, 140 up
to SN: 26800, 200, 230, 240, 300, 330, 340,
350, 400 & 450 (All gas), Services Delco
Starters: 1107021, 1107060, 1107067, 1107093,
1107169, 1107174, 1107408, 1107412, 1107427,
1107444, 1107448, 1107491, 1107886, 1108012,
1108016, 1108038, 1108041, 1108080, 1108093,
1108096, 1108097, 1108098, 1108173, 1108174
& 1108185
NOTE: Original spring style. 10 teeth.
Starter Drive Spring
(For ABC458 Starter Drive)
Replaces: 1860639
IHS1294
The following parts will fit the IHC J4 Magneto:
IHS132
Order #
Price
J4 POINTS
$9.95
Point Set, Replaces: 353172R91
F4
CONDENSOR
$14.65
F4 Condensor
Fits: J4 magneto up to SN: 81410
Replaces: 354136R92 & 373892R91
220
Description
Description
$44.95
Fits: Same as ABC458 Starter Drive
Replaces: 1868804
NOTE: Improved positive ratchet style
drive. 10 teeth.
Starters, parts cont...
Order #
IHS244
IHS1292
Price
$174.95
Starter w/ Drive (Bendix)
(For tractors w/ threaded stud for battery
cable) fits: H & HV up to SN: 391357, I4, W4,
O4, M, Early Super M up to SN: F28174 &
L504801, MV, I6, T6, W6, Super W6 up to
SN: 3950 & O6 (All gas w/ 2 bolt nose cone)
Replaces: 1107427 & 1107448
$52.35
ABC1203
$15.95
ABC1435
$15.95
ABC547
$41.10
ABC511
(6-volt)
$14.45
ABC514
(12-volt)
$14.45
ABC138
$28.45
Starter Drive Housing
Fits: A thru M, (Super H to SN: 19233),
Super M SN: F501 to F28174 & L500001 to
L504801, I, O, W4 & 6 series, 100, 130, (140
up to SN: 26800), 200, 230 & 240 (w/ 2 bolt
nose), Replaces Delco: 1878661, 1887109,
1910093 & 1943759, For starters: 1107021,
1107060, 1107067, 1107093, 1107174, 1107427,
1107448, 1108096
Order #
Price
Starter Solenoid Relay Assemblies cont...
ABC1366
$34.95
12-volt Starter Solenoid (4 Terminal)
(For 30 & 35 MT series Delco starters)
Fits: Late 350 & 450 LP, 400 & 450 diesels,
W400 & W450 gas, diesel, 600 & 650 gas,
diesel; Fits the following diesels: 454, 544,
560, 574, 656, 660, 684, 706, 756, 806, 826, 856,
1206, 1256, 1456, Early 766 thru 1568, Early
4166, Replaces: 65479C2 & 585618C91
ABC1179
$19.95
12-volt Starter Solenoid (3 Terminal)
(For Delco starters)
Fits: 424, 444, 460, 464, 504, 606, 674 & 3414
gas, diesel, LP (All w/ Delco starter); 3514
& 3616; 340 diesel w/ starter 1108657; 350;
666 & 686 synco w/ starter 1109252; The
following gas only: 404, 454, 544, 560, 574,
656, 666, 686, 706, 756, 766, 806, 826, 856,
Hydro 70 & Hydro 86, Replaces: 65478C1,
594185C1
ABC508
$5.35
ABC506
$5.30
ABC012
$11.95
IHS440
$7.50
IHS1247
$19.95
Starter Commutator (Brush) Band Cover
(For 4-1/2" O.D. Delco Starter Housing)
Fits: A thru W6, 100 thru (560 LP)
Replaces: 1886923
(1-3/16" wide) USA made
Starter Commutator (Brush) Band Cover
(For 5" O.D. Delco starter housing)
Fits: MD & Supers, ID6, ID9, OD6, TD6, TD9
4-cyl., WD6, WD9 & Supers, 400 diesel, 450
diesel, 460 diesel, 560 diesel, (600, 650 gas,
diesel) & 660 diesel
Replaces: 1880355 & 1889664
Fits: Farmall Cub up to SN: 224400, Cub
Lo-Boy up to SN: 18700 w/ starter 1109603,
1109611, 1109613 & T6 w/ starter 1107435
Replaces: 1858522 & 1850844
NOTE: Original spring style. 10 teeth.
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco Remy
starter
(2.5" o/a length, .800" wide, .150" diameter
rivet hole, 2" c.c. rivet holes)
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 18 coarse thread
starter terminals) NOTE: Brass.
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 24 fine thread
starter terminals) NOTE: Brass.
Starter Switches
Manual Starter Switch (Saddle Mount)
Fits: Cub, Cub Lo-Boy, A, B, C & Supers,
Super H, Super M, MTA, Super W6, W9,
Super WD6, WD-9, WR-9, WDR-9, 100, 130,
140, 200, 230; W9, WR-9S & WD-9 Supers
using starter 1108925 & 1108943
Replaces: Delco 1918405 & 1919600
(2 Mounting holes, .190" I.D., 1-3/8" centers)
Lever
Fits: ABC012 applications except Cub up to
SN: 128799
Replaces: 1918322 & 1919434
Starter Solenoid Relay Assemblies
Starter Solenoid Switch (3 Post)
(Saddle Mount)
Fits: 140, 300 LP, 350 & 400 LP
Replaces: DR1467 & 1114545
NOTE: Works on 6-volt & 12-volt systems.
Starter Switch Pull Rod
Fits: A, AV, B & BN SN: 42757 & up; Super
A, Super AV, 100, 130 & (140 up to SN:
26800), Replaces: 350739R2 & 55757DA
(23-3/8" length, 1/4" diameter) USA made
Starter parts continue on next page
221
Order #
Price
Push / Pull Switches cont...
Order #
Price
IHS383
$6.95
ABC398
$7.95
Universal 2-Position Push / Pull Starter
Switch fits: Ag & Light Industrial equipment
w/ Battery ignition
(10 - 24 thread)
NOTE: 30 AMP, 3/8" diameter thread, two
screw type terminals, non-fused. This can
be used on battery ignition systems only.
ABC489
$13.60
Magneto Push / Pull Ignition Switch
Fits: Cub, A, B, C, H, M & Supers, I, O, T,
W-4, 6 & 9 series gas, diesel w/ Magneto
ignition NOTE: One screw type terminal;
Out: ON; In: OFF, 1-Prong. Does not have
original look, but works great!
Starter Switches cont...
ABC066
$16.40
Manual Starter Switch (Base Mount)
(For 7/8" hole)
Fits: H, M & Early Supers, I, O & W-4,
6 series gas, diesel, Replaces: 64931H,
356913R91 & Delco 405C
Push Button Switches
IHS798
$12.95
IHS800
$12.95
ABC233
$12.50
Push Button Starter Switch
Fits: 240, 300, 330, 340, 350, 400, 404, 424,
444, 450, 460, 504, 560, 606, 656, 660, 706, 806,
1206, 4100, 4156, 4166 & 4186
Combines: T4 thru Early TD5
Replaces: 366316R91 & 366317R93
NOTE: Wires attach to switch w/ eyelets &
screws.
Push Button Starter Switch (O.E.M.)
Fits: 385, 395, 444, 454, 464, 484, 485, 495, 544,
574, 584, 585, 595, 664, 666, 674, 684, 686, 706,
756, 766, 784, 786, 806, 826, 856, 884, 886, 966,
986, 1026, 1066, 1086, 1206, 1256, 1456, 1466,
1468, 1486, 1566, 1568, 1586, 2400A, 2500A,
3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100,
4156, 4166, 4186, 4366, 4386, 4568, 4586, 5088,
5288, 5488, 6388, 6588, 6788, 7288 & 7488
Hydros: 70, 86, 100 & 186
Replaces: 397940R93 NOTE: Wires attach to
switch w/ spade terminals.
Ignition / Key Switches
ABC065
$12.95
Ignition / Key Switch w/ 2 Keys
& Mounting Nut
Fits: IH models (.800" hole dia.)
IHS760
$20.75
Universal 2-Terminal Starter Switch, Extra
heavy duty momentary push button switch
Fits: Ag & Light Industrial equipment
Depress button: ON; Spring return: OFF.
Two screw type terminal. Up to 35 V (DC),
rubber cap for dust and moisture protection.
Replaces: 373611R91
(Mounting stem 5/8"- 32 thread, 21/32"
long)
Push / Pull Switches
IHS381
$39.95
IHS382
$39.95
222
Push / Pull 1 Screw Type Terminal Ignition
Switch fits: Cub, A, B, C, H, M & Supers,
I, O, T, W-4, 6 & 9 series, 100, 130, (140 up
to SN: 26800), 200 & 230 gas, diesel w/
Magneto ignition, Replaces: 54207DB
Push / Pull 2 Screw Type Terminal Ignition
Switch fits: Cub, A, B, C, H, M & Supers, I,
O, T, W-4, 6 & 9 series, 100, 130, (140 up to
SN: 26800), 200 & 230 gas, diesel w/ Battery
ignition, Replaces: 62801DC
Push / Pull Ignition Switch Knob only
Fits: IHS381 & IHS382 Ignition Switches
(10 - 32 thread)
Replaces: 8732D
IHS1107
ACS288
$31.45
$34.95
& Mounting Nut (O.E.M)
Fits: Cub SN: 22401-239826, Cub Lo-Boy: SN
18701 & up, Cub Cadet 70 & 100, (140 SN:
26801-45000), 240, 330, 340, 350, 404, 424,
444, 450, W450, 460, 504, 544, 560, 606, 656,
660, 664, 666, 686, 706, 756, 766, 806, 826, 856,
966, 1026, 1066, 1206, 1256, 1456, 1466, 1468,
1566, 1568, 2404, 2424, 2444, 3444, 3514, 3616,
4100, 4156, 4166, 4186, 4366 & 4386
Hydros: 70, 86 & 100
Combine: Early 615 - 915
Crawlers: T4, T5, TD-5 (All SN: 3088 & up)
Replaces: 366313R91, 370375R91, 379594R92,
403562R2 & 636365R91 (.800" hole dia.)
NOTE: Two spade terminals.
Ignition / Key Switch w/ 1 Key (O.E.M)
Fits: 140 SN: 45001 & up, Cub SN: 239827 &
up, Cub Lo-Boy: 154, 184, 185; Cub Cadet:
70, 71, 72, 73, 100, 102, 104, 105, 106, 107, 108,
122, 123, 124, 125, 126, 127 & 147
Replaces: 60736C2 USA made
NOTE: Three spade terminals.
Fits: 300, 400 & W400
Replaces: 300557R91 & 361998R93
(.995" dia. threaded end.)
NOTE: Five spade terminals.
Order #
Price
Ignition / Key Switches cont...
IHS831
ABC400
$32.10
$14.85
Ignition / Key Switch w/ 2 Keys &
Mounting Nut (O.E.M)
(For .800" hole dia.)
Fits: 464, 574 gas, diesel SN: 114909 & up,
674 gas & diesel up to SN: 108104, 786, 886,
986, 1086, 1486, 1586, 2500A, 3388, 3588,
3788, 4386, 4586 & 4786
Combines: Late 715 - 1480; Hydro: 186
Replaces: 107682C1 & 71427C1
(3/4"-20 UNEF threaded stem)
NOTE: Five spade terminals.
& Mounting Nut
(3/4" diameter thread)
NOTE: Four stud type terminals.
Generator parts cont...
Order #
Price
ABC511
(6-volt)
$14.45
ABC514
(12-volt)
$14.45
KEY01
$4.25
Ignition Key
(For IHS760, IHS831 & IHS1107 Switches)
Fits: Late Cub, Late Cub Lo-Boy, 140, 154,
184, 185, 240, 340, 350, 404, 424, 444, 450, 454,
460, 464, 484, 504, 544, 560, 574, 584, 606,
650, 656, 660, 664, 666, 674, 684, 686, 706, 756,
766, 784, 786, 806, 826, 856, 884, 886, 966, 986,
1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468,
1486, 1566, 1568, 1586, 2400, 2404, 2424, 2500,
3088, 3288, 3388, 3444, 3488, 3514, 3588, 3616,
3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386,
4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588,
6788, 7288 & 7488
Hydros: 70, 84, 86, 100 & 186
Lawn & Garden: 70 & 100
Replaces: 382458R1 & 131313C1
$4.50
Ignition Key
Fits: 300, 400 & W400
(All w/ Delco switch)
IHS1699
$44.95
ABC099
$7.80
ABC100
$9.66
ABC103
$9.45
Fits: A, Super A & A1 up to SN: 317191, B, C
& Super C up to SN: 114645
Replaces: 49291D
(1/2" x 24-1/4")
ABC104
$11.00
Fits: Super A & A1 SN: 317192 & up,
Super C SN: 114646 & up, 100, 130, 200 &
230; Also fits the following diesels: ID6, MD,
Super MD, SWD6, WD6, 400, 450, W450,
Replaces: 52318DA
(1/2" x 26-3/4")
IHS235
$9.15
IHS141
$11.10
Generator parts
Price
ABC1207
$15.95
Generator Commutator (Brush) Band Cover
(For 4-1/2" O.D. Delco Starter Housing)
Fits: Cub thru WD9 & 100 thru 450
Replaces: 1872638
NEW! Generator Pulley
Fits the following using a 1-1/4" exposed
generator shaft: Super A SN: 317192 & up,
C SN: 47126 & up, 100, 130, 200, 230
Fits the following gas: Early 300 thru 450
Fits generators 1100531, 1100996
Replaces: 363366R1
(3" O.D., 2.104" long)
Generator Belts
Need fan belts? See pgs. 205, 206
Order #
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using
Delco Remy generator
(2.5" o/a length, .800" wide,
.150" diameter rivet hole, 2" c.c. rivet holes)
Generator Pulley
Ignition Keys
KEY05
Fits: Cub up to SN: 165152
Replaces: 351321R1
(1/2" x 20")
Fits: Cub SN: 165153 & up & Cub Lo-Boy
Replaces: 358213R1
(1/2" x 22")
Fits: H, Super H, W4, Super W4, I4 & 3414
424, 600, 650, 2424 & 3414
Replaces: 48878D
(1/2" x 30-1/4")
Fits: M & Supers, I, O, T, W6 series, 400 &
450 gas; Also fits the following diesels: 444 &
2444, Replaces: 49341D
(1/2" x 33-1/4")
223
Alternator, parts
NOTE: Alternators are NEW not rebuilt • To convert
6-volt to 12-volt system. For negative ground systems.
Order #
Voltage regulators, parts
Price
ABC535
$145.50
Mini 41 Amp Maximum Alternator
w/ Pulley & Diode
Fits: H, etc. requiring a smaller diameter
alternator for clearance
(4-1/2" housing dia., 2-1/2" pulley dia.,
3/8" belt width) NOTE: For 12-volt negative
ground systems only. This alternator has
a built in 3-wire internal regulator that
requires an excitation circuit. Includes
instructions.
ABC418
$97.85
63 Amp Alternator w/ Pulley
Fits: IH models
(6-1/4" housing dia., 2-1/2" pulley dia.,
5/8" belt width) NOTE: For 12-volt
negative ground systems only. Simple
1-wire alternator hook up: Run a wire from
alternator through amp gauge to positive
side of battery! Must rev engine to 800 850 RPM in order for unit to self excite.
ABC1426
$12.85
NOTE: Cut-out relay has two terminals on one side & one
terminal on the other side. Regulator has three terminals on
one side & one terminal on the other side or bottom.
Order #
Price
IHS1258
$90.30
Cut-out Relay Assembly
(Saddle mount)
Fits: Farmall Cub up to SN: 115402, IH Cub
Lo-Boy up to SN: 16397, A, AV, Super A up to
SN: 345198, B, BN, C up to SN: 47125, H up
to SN: 350953, I4, I6 up to SN: 36785, I9, M up
to SN: 229910, Early O4, OS4, O6 up to SN:
29473, OS6 up to SN: 29473, Early W4, W6 up
to SN: 29473 & W9 up to SN: 48740
Replaces: 46412D & Delco 1116766
USA made NOTE: This is a 2 terminal cutout that only fits tractors equipped w/ lights.
ABC153
ABC152
ABC188
$32.95
$31.50
6-volt (4 Terminal) Voltage Regulator
(Saddle Mount)
Fits: Cub, Cub Lo-Boy, A, Super A, B, C, H,
M, I, O, T, W-4, 6, 9 series gas using Generator
1101423 & 1101355, Replaces: 46412D & Delco
1116766 & 1116809
NOTE: Provides 2-unit positive ground
generator mounted regulator.
6-volt (4-Terminal) Voltage Regulator
(Base Mount)
Fits: Cub, Cub Lo-Boy, Super A, C, Super C,
H, Super H, M, Super M, Super MTA, I4, I6,
I9, O4, W4, W6, W9, WR9, 100, 130, 140, 200,
230, 240, 300, 330, 340, 350, 400, 450, 600 & 650
(All w/ generator 1100055, 1100501, 1101377,
1101851, 1101852, 1101853, 1101854, 1101855,
1101856, 1101857, 1101858)
Replaces: D657, 1116807, 1116816, 1118291,
1118308, 1118780, 1118982, 1119575, 121578C1,
354234R91 & 360898R1
Pulley only (For ABC418)
(.670" shaft diameter, 3-3/16" pulley O.D.,
1/2" belt width)
ABC495
$19.95
Pulley only (For ABC418)
(.670" shaft dia., 2-1/2" pulley O.D.,
5/8" belt width)
IHS1246
$52.15
IHS829
$38.90
$37.80
Voltage Regulator Conversion Kit
Fits: IH models w/ original
Cut-out to use a regulator
ABC185
224
$34.95
12-volt (4 Terminal) Voltage Regulator
(Base Mount)
(For 12-volt Generator system)
Fits: Cub SN: 221293 - 248124, Cub Cadet
70 & 100, Cub Lo-Boy SN: 16398 & up (not
154), 140 SN: 26801 & up, 460 & 560 (All
w/ generator 1100356, 1100401, 1100394 &
1100395), Replaces: 376122R91 & 121577C1
Alternator Bracket Kit
Fits: H series SN: 125250 & up & Super;
I, O, W4 series All w/ SN: 5864 & up; 300
& 350 USA made NOTE: Allows use of
ABC418 alternator to mount under hood w/
out cutting hood. The belt that is included
will not work for 300 & 350. To fit earlier
serial number tractors customer must
modify top radiator brace for alternator
clearance.
Alternator Bracket Kit
Fits: M & MV (both w/ SN: 63325 & up),
Super M & MTA, O6 SN: 7027 & up, W6 SN:
7068 & up, 400, W400, 450 & W450
NOTE: Used when switching from a
generator to ABC418 Alternator. To fit
earlier serial number tractors customer
must modify or delete top radiator brace.
Alternator, parts cont...
Order #
Price
ABC404
$34.95
ABC529
$26.45
IHS960
$34.25
Universal Mounting Kit
Fits: IH models
NOTE: Used when switching from a
generator to an alternator. Does NOT
include top adjusting bracket. May have to
be drilled or modified for your application.
Universal Top Adjusting Bracket
Fits: IH models
(7/8" wide, 1-1/2" offset, 8-1/4" from
farthest end of slot to center of mounting
hole, 3-3/4" slot length, 3/8" mounting hole)
NOTE: Customer may need to trim to fit
some models.
Alternator Shield
Fits: 544 gas, Farmall 656 gas up to SN:
47397, IH 656 gas up to SN: 14794,
Farmall 706 SN: 37237 & up, IH 706
SN: 5274 & up, 756 gas, Farmall 806 SN:
33163 & up, IH 806 SN: 7101 & up, 826 gas,
856, 1026, Farmall 1206 SN: 11793 & up,
IH 1206 SN: 8384 & up, 1256 & 1456
Replaces: 396360R1 & 396360R2
USA made
Light switches, parts cont...
Order #
Price
IHS1636 $68.50
IHS595
(6-volt)
NOTE: Some switches have a different appearance than
the original switches, but once installed only the handle is
visible which is identical to originals.
IHS579
Price
$8.00
Old-Style Knob
(For Rotary Light Switches)
Fits: Cub, (A, AV & Supers), B, BN, (C, H,
HV, M, MD, MV, MDV, & Supers), MTA
series, (W4, W6 & Supers), W9, W6TA
series, WD6, WD9, WR9, WDR9, O4, OS4,
I4, I6, ID6, I9, ID9; Crawlers: T6, TD6, T9,
TD9, TD14, TD14A, TD15 (150 series), TD18,
TD18A, Replaces: 57313D
NOTE: Interchanges w/ original
equipment (O.E.M).
IHS594 $44.95
(12-volt)
IHS602
$6.00
IHS600
$44.95
H
i Chelsea! Got my second order yesterday THANKS A MILL - my next order will follow
soon. The temp gauge is still on-route.
- A satisfied customer
Rotary Light Switch (3-position)
w/ Old-Style Knob
O6, OS6, I4, I6, ID6, I9, ID9
IHS596 Replaces: 1994038, 1994050,
263691R92 USA made
NOTE: For tractors w/ regulators, not cutouts and no combo rear light.
$44.95
Light switches, parts
Order #
NEW! Rotary Light Switch (4-position)
w/ Knob
Fits the following models w/ cut out relay
on generator: A, B, C, Cub, H, M, O, W
series, Replaces: 57310DX, 57310DY
$44.95
IHS596 $44.95
(12-volt)
IHS593
(6-volt)
Rotary Light Switch (4-position)
w/ Old-Style Knob
O6, OS6, I4, I6, ID6, I9, ID9 USA made
NOTE: For tractors w/ regulators, not
cutouts and w/ combo rear light.
New-Style Knob
(For Rotary Light Switches)
Fits: Cub SN: 210001 & up, Cub LoBoy SN:
10001 & up thru 4386, Replaces: 1930685
NOTE: O.E.M manufacture, arrow design.
6-volt Rotary Light Switch (3-position)
w/ New-Style Knob
Fits following w/ 6-volt voltage regulator:
100, 130, 200, 230, 300 gas, 330, (350 gas
up to SN: 13242), 400 gas, W400 gas, (450
gas up to SN: 11083); (Cub thru W9 when
switched from cutout to voltage regulator)
Replaces: 362111R91 & 363130R91
USA made
Light switches, parts continue on next page
225
Order #
Price
IHS950
$19.75
Light Switch Field Resistor
Fits: Cub, A, AV, (Super A equipped w/
generator relay), C up to SN: 47125, (H, HV
up to SN: 340953), M, MV w/ nmagneto
ignition, O4, OS4, O6, OS6, W4, W6, (WD6
w/ Delco lighting), W9 w/ magneto
ignition, (WD9 w/ Delco lighting) & WR9
(All w/ cut-out on generator)
Replaces: 47891D & Delco 1878070
IHS952
$14.50
Lighting Switch Dimmer Resistor
Fits: Cub, A, B, C, H, HV, M, MV & Supers,
O4, OS4, O6, OS6, W4, Super W4, W6,
Super W6, (WD6 w/ lighting only), W9,
WR9, WR9S, 100, 130, 200, 230, 300, 330, 350,
400, W400, 450 & W450 (All gas w/ 6-volt
system), Replaces: 47889D & Delco 814545
NOTE: Fits switches for all 6-volt systems
both w/ cut-outs & regulators.
Order #
IHS601
IHS598
Price
$44.95
$44.95
IHS599
$44.95
IHS788
$42.15
IHS786
ABC398
JDS631
226
$46.45
$7.95
$12.95
w/ New-Style Knob
Fits following w/ 12-volt & voltage
regulator: 300 LP, 350 LP, diesel, (350 gas
SN: 13243 & up), 400 LP, 450 LP, diesel, (450
gas SN: 11084 & up); (MD thru 650 when
switched from cutout to voltage regulator.)
w/ New-Style Knob
Fits the following w/ 6 volt systems: Cub
SN: 210001 - 224000, Cub LoBoy SN: 10001
- 18700, 140 up to SN: 26800, 240, 340 gas,
(T340 up to SN: 5395 gas), (T4, T5 6-volt)
JDS1030 $11.95
Light Switch Knob
Fits: Cub Cadets up to SN: 400000
10-32 UNF
NOTE: Black metal.
w/ New-Style Knob
Fits the following w/ 12 volt system: 340
diesel, 500 Crawler, I460, F460, 560, 660, (T4,
T5 12-volt), TD5
Rotary Light Switch (O.E.M)
Fits: Cub SN: 224401 & up, Cub LoBoy SN;
18701 & up, 140 SN: 26801 to 62471, 154,
184, 185, 354, 404, (T340 SN: 5396 & up),
(TD340 SN: 5396 & up), 424, 2424, 444, 2444,
454, 464, 504, 574, 606, 674, 706, 806, 1206,
2300A, 2400A, 2500A, 3414, 3444, 3514, 3600,
3616, 3800, 3850, 4100, 4156
Replaces: 376851R91, R92 USA made
NOTE: 5 outer terminals plus resistor.
Universal 3-Position Push / Pull Light
Switch
w/ Voltage Regulator
(10 - 24 thread)
NOTE: 15 AMP, four terminals, fused.
Black plastic knob.
Shift quadrant light, part
IHS841
ABC345
Serviceable for 756, 766, 826, 856, 966,
1066, 1026, 1256, 1456, 1466, 1468, 1566,
1568 & Hydro 100
IHS841 Replaces: 397946R1 & 406127R1
(2-3/8" o/a length)
Description
4-Position Rotary Light Switch
Fits: 544, 656, 664, 666, 686, 756, 766, 826,
856, 966, 1026, 1066, 1256, 1456, 1466, 1468,
1566, 1568, 4166, 4186, 4366 & 4386;
Hydros: 70, 86, 100
Universal 2-Position Push / Pull Light
Switch
NOTE: 30 AMP, 3/8" diameter thread, two
screw type terminals, non-fused.
Order # Price
12-volt Shift Quadrant Light................................ IHS841................ $19.65
(For 1-1/4" Opening)
Bulb only................................................................. ABC345.............. $1.80
Dash light lens
Fits: 460, 560 & 660
Replaces: 371204R1
Description
Order # Price
Dash Lamp Lens..................................................... IHS900................ $19.95
Headlight assys., parts
Order #
IHS351R
(6-volt)
Price
$44.95
IHS351R12V $44.95
(12-volt)
Need light
components?
Look on page
289 - 291.
Complete Headlight
Assembly
Fits: Cub, A, B, C, H, M &
Supers, I, O, T, W-4, 6, 9 series, TD-14, 14A
Crawler, TD-18 & 18A Crawler
IHS351R Replaces: 45640DB
IHS351R12V Replaces: 45640DB, 61225DB
(4-3/4", Red)
Headlight assys., parts cont...
JDS676
$18.15
Clamp Ring w/ Screw
(For Sealed Beam Lights)
Fits: Cub SN: 210001 & up, Cub Lo-Boy
SN: 10001 & up, 140, 240, 340, 460, 560
& 660, Replaces: 371445R91, 371449R91,
371451R91
(4-1/2")
6-volt Sealed Beam Headlight Assembly
Serviceable for Cub SN: 210001 & up,
Cub LoBoy SN: 10001 & up, 140 up to
SN: 26800 (All w/ 6-volt system),
Replaces: 381181R91;
Will also fit the following when ordering
ABC460 Bulb to convert to 12-volt system:
140 SN: 26801 & up, F404, I404, I504
Replaces: 376849R91
(4-1/2", Black)
Order #
Price
IHS460
$54.95
6-volt Flatback Headlight Assembly
Fits: Cub up to SN: 210000, Cub LoBoy up
to SN: 10000, 100, 130, 200, 230, 300, 330,
(350 up to SN: 13242), 400, (450 up to SN:
11083), (W400, W450 both up to SN: 1350)
(All gas); WR9S; Supers: A & C (both late
1951 & up), H, M, MTA, W4, (W6 SN: 3951
& up), W6TA, W9
Replaces: 357884R91,92,93,94
(4-5/8")
JDS468
$44.95
IHS463
$54.95
12-volt Flatback Headlight Assembly
Fits: 300 LP, (350 SN: 13243 & up, gas, LP,
diesel), 400 LP, diesel, (450 SN: 11084 & up,
gas, LP, diesel), W400 diesel, (W450 SN:
1351 & up, gas, LP, diesel); Supers: MD,
MDTA, (WD6 SN: 3951 & up), WD6TA,
WD9, WDR9 & tractors converted to
12-volt system, Replaces: 357885R91,92,93
(4-5/8")
FDS213
$52.50
IHS647
$35.75
IHS402
IHS403
$52.25
$52.25
6-volt Sealed Beam Bulb w/ Guide Name
(For Factory IH Headlights)
Fits: Cub up to SN: 210000, Cub LoBoy
up to SN: 10000, Super A, Super C,
Super H, Super M, MTA, 100, 130, 200,
230, 300, 330, (350 up to SN: 13242), 400,
(450 up to SN: 11083), Super W4,
(Super W6 SN: 3951 & up), Super W6TA,
Super W9, WR9S, W400 gas, W450 gas
up to SN: 1350, Replaces: 358890R92
(4-5/8") NOTE: Will only fit factory
IH lights. Will not fit IHS460, IHS463
Headlight Assemblies.
12-volt Sealed Beam Bulb w/ Guide Name
(For Factory IH Headlights)
Fits: Super MD, Super MDTA, (Super
WD6 SN: 3951 & up), Super WD6TA,
Super WD9, Super WDR9, 300 LP, (350 gas
SN: 13243 & up), 350 LP, diesel, 400 LP,
diesel, (450 gas SN: 11084 & up) 450 LP,
diesel), W400 LP, diesel, (W450 gas SN:
1351 & up), W450 LP, diesel
Replaces: 358893R92
(4-5/8") NOTE: Will only fit factory
IH lights. Will not fit IHS460, IHS463
Headlight Assemblies.
ABC344
ACS123
OLS071
OLS072
Description
12-volt Sealed Beam Healight Assembly
Serviceable for F340, 404, 424, 444, 460,
504, 560, 606, IH 660, IH 2500, T340, TD340
Replaces: 377866R91
(5-3/4")
12-volt Sealed Beam Headlight Assembly
Fits: 06, 56 & 66 series
(4-1/2")
NOTE: Post is out of back w/ wires thru
post.
Piggy back tail light components
Fits: Cub, Cub LoBoy, A, AV, Super A,
Super A1, Super AV, Super AV1, C,
Super C, H, HV, Super H, Super HV,
M, Super M, MD, Super MD, MV, MDV,
Super MV, Super MDV, I4, I6, I9, ID6, ID9,
O4, OS-4, O6, OS-6, ODS-6, W4, W6, WD6,
W9, WD-9, WR-9, WDR-9, WR-9S
ABC344 Replaces: 142303, Bulb #63
ACS123 Replaces: 354308R1
(2-1/8" O.D.)
OLS071 Replaces: 354307R92
OLS072 Replaces: 92111H
Order # Price
6-volt Tail Light Bulb.............................................ABC344...............$1.80
Red Glass Tail Light Lens.....................................ACS123...............$14.95
Tail Light Trim Ring..............................................OLS071...............$9.95
Tail Light Gasket....................................................OLS072...............$2.00
227
Light clamps, brackets, parts
Order #
Tail light assys., parts
Order #
Price
IHS473
(6-volt)
$69.95
IHS455
(12-volt)
$69.95
IHS899
$18.85
Rear view
ABC544
ABC546
ABC548
FDS172
228
$15.95
$21.30
$10.15
$41.15
Need light
components?
Look on page
289 - 291.
Combo Tail Light Assembly
w/ Red Jewel Lens & Rotary
Switch fits: Cub, Cub Lo-Boy, A, B, C, H, M
& Supers, I & W-4, 6, 9 series, 100 thru 650,
T4, T5 & TD5, Miscellaneous Combines &
Windrowers
(4-3/4")
12-volt Sealed Beam Combination Rear
Light Bulb (4-1/2") w/ transparent red
background using separate bulb
(For Light 377102R92)
Fits: Cub, Cub Lo-Boy 154, 184, 185, 140 SN:
26801 & up, 340, 354, 364, 384, 404, 424, 444,
454, 460, 504, 544, 560, 574, 606, 656, 660, 666,
674, 686, 706 thru 1586, 4366 thru 4786,
Hydro 86 thru Hydro 186 (All w/ 12-volt
systems), Replaces: 371461R92
12-volt Fender & Cab Warning Light
w/ 2 amber lenses, double contact bulb &
black die cast base
Serviceable for 154 thru 4186 (All using
round warning light)
Replaces: 394129R91, 531627R91,
3123675R92, 199954A1 & 67538C92
(4" lens dia.)
12-volt Fender & Cab Warning Light
w/ 1 amber lens, 1 red lens, amber side
marker, single contact bulbs & black ABS
base
Serviceable for 766 & up
(All using rectangular warning light)
Replaces: 537328R91
12-volt Round Red Tail Light Assembly
w/ License Lamp Window, red lens & black
ABS base
Fits: 100 thru 1256 & Cub Cadet 70 thru 123
Replaces: 45645HA, 121846C91, 370306R91,
370716R91, 376850R91, 379789R91, 404418R1,
967696R92 (4" dia.; 2 stud mount, 1-7/8" c.c.
studs) NOTE: May have to 'slot' mounting
holes for some applications.
12-volt Tail Light Assembly w/ Bulb
Serviceable for Cub Lo-Boy SN: 10001 & up,
140, 154, 240, 340, 404 & F856
Lawn & Garden: Cub Cadet 70, 71, 72, 102,
122 & 123 (All up to SN: 400000)
Replaces: 370306R91, 370716R91, 371368R91,
376850R91 NOTE: May have to 'slot'
mounting holes for some applications.
Price
IHS464 $7.75
(Red)
IHS992 $7.50
(Cast
iron)
IHS557 $8.00
EACH
IHS495 $19.95
IHS414 $10.00
IHS415 $9.00
Light Clamps
(For Front & Rear Lights)
Fits: Cub, Cub Lo-Boy, C, H, M & Supers, I, O,
W-4, 6, 9 series gas, diesel, 100 thru 650
IHS992 Replaces: 6780D
NOTE: IHS464: Powder coat red
NOTE: IHS992: Cast iron
Front Light Bracket Assembly
(Post, Nut & Washer)
Replaces: 351341R1 (post), 114507 (nut) &
703325 (washer)
NOTE: 2 required per tractor;
Sold individually.
Rear Tail Light Bracket
Replaces: 352121R11
USA made
LH Front Light Bracket
Fits: A, Super A, B, BN, 100, 130 & 140 series
Replaces: 49394D
NOTE: Use IHS414 for LH & RH sides when
ordering for B & BN.
RH Front Light Bracket
Fits: A, Super A, B, BN, 100,130 & 140 series
Replaces: 49393D
NOTE: Also works for rear.
IHS734 $3.15
Set Screw & Nut
Fits: A, Super A, B, BN, 100,130 & 140 series
Replaces: 102896 & 218438
IHS735 $49.95
IHS232 $59.95
IHS535 $14.00
Rear Light Bracket Assembly
(Post, Bracket, Set Screw & Nut)
Fits: A, B & BN
Replaces: 49393D (post), 6813D (bracket),
102896 (set screw) & 218438 (hex jam nut)
Light Bar
Fits: H, M & Supers
Replaces: 51675DC USA made
U-Bolt Set
Fits: H, M & Supers
NOTE: IHS535 mounts headlight bar to
steering column.
Hood ornaments
Fits: Some Cub Cadet tractors;
All Farmall 200, 230, 240, 330, 340, 404,
444, 460, 504, 544, 560, 606, 656, 660, 664,
706, 756, 806, 826, 2404, 2444, 2504 & 2544
Crawlers: T4, T5 & TD5
Replaces: 369180R1
Description
Order # Price
Chrome Hood Ornament...................................... IHS733................ $59.95
Fits: 666, 686, 766, 966, 1066, 1466, 1468,
1566, 1568, 786, 886, 986, 1086, 1486,
1586, 4366, 4386, 4568, 4586 & 4786
Hydros: 70, 86, 100 & 186
Replaces: 538005R1
Description
Order # International: Chassis parts
Front emblems cont...
Order #
Price
IHS185
$27.85
IHS205
$16.00
IHS069
$15.30
IHS206
$30.00
Front Emblem (IH Block)
Fits: 100, 130, 200 & 230
Replaces: 362513R1
(3" W x 3-1/2" H)
NOTE: Chrome plated w/ red background,
die-cast.
IHS271
$20.55
Fits: 300, 330 & 350 Rowcrop & Utility
Replaces: 362397R2 & 365371R1
(3" W x 3-1/2" H)
NOTE: Stainless w/ red background.
IHS261
$20.55
IHS745
$39.95
Price
Black Plastic Hood Ornament............................. IHS742................ $9.95
Front emblems
Order #
Price
IHS294
$29.95
IHS161
$37.85
IHS207
Fits: Cub (1954 thru 1963)
Replaces: 362387R1
(2-9/16" W x 3" H)
NOTE: Chrome plated w/ black background,
die-cast.
Front Emblem (FARMALL)
Fits: A, AV, B & BN
Replaces: 43658D
(10-1/8" L x 1-11/16" H) USA made
NOTE: Polished aluminum w/ black
background.
$48.75
Front Emblem (INTERNATIONAL)
Fits: Farmall A Industrial & Exported
(10-1/8" L x 1-11/16" H) USA made
NOTE: Not painted.
IHS194
IHS186
$37.85
$27.85
Front Emblem (FARMALL)
Fits: H, HV, M, MD, MV & MDV
Replaces: 49404D
(12-1/8" L x 2-1/8" H) USA made
NOTE: Polished aluminum w/ black
background.
(Chrome
Plated;
Die Cast)
IHS835
(Plastic)
Front Emblem (McCORMICK DEERING)
Fits: W4, W6 & W9 (up to 1947)
Replaces: 56598D
(12-1/8" L x 2-1/8" H)
NOTE: Not painted.
$14.95
Front Emblem (McCORMICK)
Fits: W4, W6, W9 (1948 & up), O4, OS4, O6,
OS6 & ODS6, Replaces: 355156R1
(12-1/8" L x 2-1/8" H)
NOTE: Not painted.
Front Emblem (IH Logo)
Fits: Super A & AV, C & Super C
Replaces: 352580R1
(2" W x 2-3/16" H)
Front Emblem (IH Logo)
Fits: Super H, Super HV, Super M, Super MV,
Super MTA, Super WD9 & WDR9
Replaces: 357650R1
(2-5/6" W x 2-7/8" H)
Fits: 400, 450, W400 & W450
Replaces: 362320R2
(3-3/4" W x 4-1/4" H)
NOTE: Stainless w/ red background.
Front / Cab Emblem
Fits: Cub SN: 210001 & up, Cub Lo-Boy SN:
10001 & up, Cub Cadets up to SN: 400000,
140, 154, 184, 185, 240, 340, 404, 424, 434, 444,
460, 504, 544, 560, 606, 660, 666, 686, 766, Early
786, 886, 966, 986, 1066, 1086, 1466, 1486, 1566,
1568, 1586, 2400A & 2500A; Crawlers: T4, T5
& TD5; Hydros: 70, 86, 100 & 186 For Cab
only: 656, 756, 856 & 1256
(2-13/16" W x 3-3/8" H)
Front emblems continue on next page
229
International: Chassis parts
Side emblems
Order #
Price
IHS409
$99.95
EACH
Side Emblem (FARMALL CUB)
Fits: Cub SN: 185001 - 210000
Replaces: 362386R2 (16" long)
USA made
NOTE: Stainless steel.
IHS305
$48.95
EACH
Side Emblem (INTERNATIONAL CUB)
Fits: Cub Lo-Boy SN: 501 to 10000
Replaces: 364044R1 (16" long)
Front emblems cont...
Order #
Price
IHS747
$39.95
(Chrome
Plated;
Die Cast)
IHS837
(Plastic)
IHS784
(Chrome
Plated;
Die Cast)
IHS749
(Plastic)
IHS833
$14.95
$14.95
$18.50
$0.25
EACH
IHS677
$1.00
EACH
IHS411
$49.95
EACH
Vertical Side Emblem (LO-BOY)
Fits: IH Cub Lo-Boy up to SN: 10000;
Farmall Cub Lo-Boy SN: 185001 - 210000
Replaces: 364045R1
(1" W x 5-7/8" L)
IHS408
$37.50
EACH
Side Emblem (McCORMICK)
Fits: Cub SN: 185001 - 210000, Cub Lo-Boy up
to SN: 10000; 100, 130, 200 & 230
Replaces: 362389R1
(1/2" H x 5-7/8" L)
IHS513
$49.30
EACH
Side Emblem (FARMALL)
Fits: 100, 130, 200 & 230
Replaces: 389507R9 & 362512R2
(1-1/4" H x 16" L)
IHS290
$49.95
Side Emblem (100)
(3-1/2" W x 1-7/8" H, 2-11/16" c.c.)
USA made
IHS291
$49.95
Side Emblem (130)
(3-1/2" W x 1-7/8" H, 2-11/16" c.c.)
USA made
IHS292
$49.95
IHS293
$49.95
Emblem Push Clip
(For IHS206, IHS271, IHS261 Front Emblems)
(Center hole dia. = 0.180" & will expand to
0.300") NOTE: Push Clips are included w/
the listed emblems. Sold individually.
IHS591
$34.95
EACH
Emblem Tubular Clip
(For pegs w/ .195" diameter)
Fits: Some IH models (1958 & up)
Replaces: 370786R1
IHS511
$49.30
EACH
$39.95
ABC374
230
Front Emblem
Fits: 544, 656, 664 & 706
For Cab only: 4100, 4156, 4166, 4186, 4366 &
4386
(3-5/8" W x 4" H)
NOTE: (2) Mounting holes not exposed.
Sold individually
Front Emblem
Fits: 756, 806, 826, 856, 1026, 1206, 1256 & 1456
(Cab & Grille)
(3-5/8" W x 4" H)
Front Emblem
Fits: 284, 384, 385, 433, 484, 485, 584, 585, 674,
684, 685, 784, 785, Late 786, 884, 885, Late 886,
Late 986, Late 1086, Late 1486, Late 1586, 3388,
3588, 3788, Hydro 84 & Hydro 186
Industrial: 2400A
Replaces: 120397C1 & 2751844R1
(3-1/4" W x 3-1/2" H)
NOTE: Plastic w/ silver sides. Mounting
holes not exposed.
Side Emblem (200)
(3-1/2" W x 1-7/8" H, 2-11/16" c.c.)
USA made
Side Emblem (230)
(3-1/2" W x 1-7/8" H, 2-11/16" c.c.)
USA made
Side (Oval) Emblem
Fits: 140
Replaces: 369084R1
NOTE: Metal.
Side Emblem (McCORMICK)
Fits: 300, 350, 400 & 450 (All Rowcrops)
Replaces: 362317R1 (3/4" H x 9-1/2" L)
Side emblems
Order #
Price
IHS512
$60.75
EACH
cont...
Side Emblem (FARMALL)
Fits: 300, 350, 400 & 450 (All Rowcrops)
Replaces: 362315R2
(2-1/8" H x 26" L)
IHS743
$79.95
Side Emblem w/ Mounting Hardware
Fits: 504, 656, 706, 806 & 1206
Replaces: 377796R1
(2-5/8" wide, 30-1/2" long)
IHS767
$85.00
Fits: 756, 826, 856, 1026, 1256 & 1456
Replaces: 2753920R1
IHS720
$39.30
Side Emblem
Fits: 706 gas
Replaces: 381554R1
NOTE: Aluminum w/ black background &
creme numbers.
IHS722
$39.30
Side Emblem
Fts: 706 diesel
Replaces: 381555R1
creme numbers.
IHS724
$39.30
Side Emblem
Fits: 806 gas
Replaces: 381557R1
creme numbers.
IHS726
$39.30
Side (Oval) Emblem
Fits: 460 Row Crop diesel
Replaces: 369121R1
Side Emblem
Fits: 806 diesel
Replaces: 381558R1
creme numbers.
IHS783
$85.00
Side Emblem
Fits: 1206
NOTE: Anodized aluminum. Made from
original tooling.
Side (Oval) Emblem
Fits: 560 gas
Replaces: 369127R1
JDS630
$0.40
ABC373
$0.25
EACH
Emblem Push Clip
(For pegs up to .125" diameter)
Fits: IH / Farmall models (Center hole dia. =
0.100" & will expand to 0.150")
NOTE: Push Clips are included w/ the
emblems.
IHS677
$1.00
EACH
Emblem Tubular Clip
(For pegs w/ .195" diameter)
Fits: Some IH models (1958 & up)
Replaces: 370786R1
Side Emblem (300)
For Row Crop models only
Replaces: 362396R1
(6" W x 3-1/8" H, 4" c.c.)
IHS373
$39.95
Side Emblem (350)
For Row Crop models only
Replaces: 366679R1
(6" W x 3-1/8" H, 4" c.c.)
IHS361
$24.95
Side Emblem (400)
For Row Crop & Wheatland models
Replaces: 362314R1
(6" W x 3-1/8" H, 4" c.c.)
IHS362
$24.95
Side Emblem (450)
For Row Crop & Wheatland models
Replaces: 366680R1
(6" W x 3-1/8" H, 4" c.c.)
IHS698
$28.50
Side Emblem (Torque Amplifier)
Fits: Super MTA, 300, 330, 350, 400, W400, 450
& W450
Replaces: 362394R1
IHS712
$39.30
Side (Oval) Emblem
Fits: 460 Row Crop gas
Replaces: 369119R1
IHS716
IHS718
$39.30
$39.30
Side (Oval) Emblem
Fits: 560 diesel
Replaces: 369129R1
IHS741
$79.95
cont...
Price
$39.95
$39.30
Side emblems
Order #
IHS375
IHS714
Fits: 460 & 560
Replaces: 369117R1
Emblem Push Clip
(For most side emblems up to 1958
w/ .125" diameter pegs)
231
Serial number tags cont...
Order #
Price
ABC464
Rivet only (For Serial Number Tags)
(6 x 3/8") USA made
NOTE: Steel. Sold individually.
Serial number tags - USA made
• Blank w/ rivets.
• You stamp your serial number.
Order #
IHS762
Price
ABC1585
$29.95
$0.50
Serial Number Tag w/ Rivets
Fits: F12, F14, F20, F30, W30 & W40
(2-15/16" x 6-1/8")
IHS764
IHS757
IHS289A
IHS289B
$29.95
$24.95
$19.00
$19.00
Fits: 10-20
(2-15/16" x 6-1/8")
Fits: 15-30
(2-15/16" x 6-1/8")
NEW! Rivet only (For Serial Number Tags)
(.347" o/a length, .225" head dia., .255"
useable shank length, .126" shank dia.)
NOTE: Brass. Sold individually.
Customer may need to drill the tag for the
rivet.
Hand crank bracket
Fits: A, Super A, AV, Super AV,
B, BN, 100 & 130
Replaces: 350639R91
Description
Order # Price
Hand Crank Mounting Bracket........................... IHS404................ $17.95
Starter hand cranks - USA made
Fits: Cub, A, B, C, H & M
(Early style 1939-49)
(2-1/4" x 4")
Fits: Cub, A, B, C, H & M;
Serviceable for W6, 200 & up
(Later style 1950-approximately 1957)
(2-1/4" x 4")
IHS289AFC
$19.00
IHS289BFC
$19.00
Fits: C (goes on seat base)
(Later style 1950 & up)
(2-1/4" x 4") USA made
NOTE: The "FC" is already printed.
IHS1595
$19.95
NEW! Serial Number Tag w/ Rivets
Fits: Some 504, 706, 756, 806, 826, 856, 1206
& 1256
(1-5/8" x 3-1/2", Rivets = 3/32")
USA made
IHS1589
$19.95
NEW! Serial Number Tag w/ Rivets
Fits: Cub LoBoy 154, 544, 656, 666, 686, 756,
826, 966, 1026, 1066, 1256, 1456, 1466, 1468,
1566, 1568 & Hydro 70; Will also fit 86 & 88
series but font is larger; Also fits as a cab
serial number tag for 86 series
(1-5/8" x 3-1/2", Rivets = 3/32")
USA made
232
$0.25
Fits: C (goes on seat base)
(Early style 1939-49)
(2-1/4" x 4") USA made
NOTE: The "FC" is already printed.
Order #
Price
IHS543
$42.15
IHS976
$42.15
IHS401
$25.75
IHS544
$44.85
IHS477
$24.00
Starter Hand Crank w/ Pin
(With spinner)
Replaces: 351010R31 & 351011R1 (pin)
(13-1/2" to first bend)
(With spinner)
Replaces: 351010R31
(Without spinner)
(With Spinner)
Fits: A, Super A w/ 113 engine & B;
The following w/ Tricycle front only:
C, 200, 230, 340, 404 & 504
Replaces: 47961DBX, 53385DBX; 15204D (pin)
(13-1/2" to first bend, 3/4" dia.)
(Without Spinner)
Fits: A, Super A w/ 113 engine & B;
C, 200, 230, 340, 404 & 504
Starter hand cranks cont...
Order #
Price
IHS545
$45.65
IHS546
$61.35
(With spinner)
Fits: Super A w/ 123 engine, 100 & 130;
Super C, 200, 230, 240, 340, 404 & 504
Replaces: 357750R11; 15204D (pin)
(17" to first bend, 3/4" diameter)
Front grilles, parts cont...
Order #
Price
IHS1816
$249.95 NEW! 4-Bar Grille w/ Screen
IHS298
$228.10
Fits: Farmall Cub SN: 210001 - 222500,
International Cub LoBoy SN: 10001 - 17200
Replaces: 368673R1
(15" wide grille or 15-1/2" wide including
tabs x 14-3/4" tall x 4-3/4" deep)
NEW OLD STOCK
NOTE: Must be sanded, reprimed &
painted. This is a one time deal; limited to
stock on hand!
Starter Hand Crank
(With spinner)
Fits the following w/ Tricycle front
only: H, M & Supers gas, diesel,
F300, F350, F400 & F450
Replaces: 51544DBX
(17" to first bend, 7/8" diameter)
Front Radiator Grille Insert w/ Screen (Steel)
Fits: 100, 130, 200 & 230
Replaces: 362592R11
USA made
Front grilles, parts
What makes our lower grille inserts the best on the market?
1) Have correct angle for a perfect fit!
2) Have correct wire screen!
3) USA MADE!
For best results fit to tractor before painting.
Order #
Price
IHS197
$51.50
IHS198
$51.50
IHS208
$27.95
MIS100
$6.00
IHS1572
$149.95
NEW! Grille Screen
Fits: 140 SN: 23301 & up
Replaces: 368873R91, 372060R91 & 384916R11
(19-1/16" tall x 15-3/4" wide) USA made
NOTE: Grey primer.
Lower Grille Insert w/ Screen
Fits: H, HV, Super H & Super HV
Replaces: 48963DXA
USA made
Lower Grille Insert w/ Screen
Fits: M, MD, MTA & Supers
Replaces: 50204DXA
USA made
IHS953
$0.50
FDS311
$3.75
IHS345
$48.50
Wire Grille Screen (2' x 3')
Fits: Cub, A, B, C, H, M &
Supers, W4, 6, 9 & others
USA made
NOTE: 5 squares per inch.
Wire Screen Clips (pkg of 6)
(For IHS208)
IHS073
IHS680
$96.45
$224.95
Front Grille Screen (Mesh)
Fits: All round, red Cubs
up to SN: 185000 (1947-53)
Replaces: 350979R11
USA made
New & improved fit!
Front Bar Grille w/ Screen
Fits: Cub SN: 185001 - 210000;
International Cub Lo-Boy
up to SN: 10000
Replaces: 362372R11
Dash Support & Grille Truss Head Screw
Fits Grille: Farmall Cub up to SN: 222500,
Cub Lo-Boy up to SN: 17200;
Fits Dash Support: Farmall Cub (1947-64),
International Cub (1964-79), Cub Lo-Boy
(1955-68), Replaces: 144531& 85700996
NOTE: Stainless. 4 used for grille, 4 used
for dash support; Sold individually.
Grille Screen Spring
Fits: 404, 504, 606, 706, 756, 2404, 2504, 2606,
2706 & 2756; Cub Cadets: 72, 73, 104, 105,
106, 107, 124, 125, 126, 127 & 147
(All up to SN: 400000)
Replaces: 391347R1
Grille Repair Patch
Fits: M, MD, MTA & Supers
Exact Reproduction of Lower Bar
USA made
NOTE: Not factory as separate piece which
is usually damaged. The damaged grille bar
must be cut out & IHS345 must be welded
on, which goes BELOW Grille Insert
(IHS198).
Front grilles, parts continue on next page
233
Order #
IHS970
Price
Replaces: 71780C1
(27" wide x 9-5/8" tall) USA made
NOTE: Silver & black plastic.
Order #
Price
IHS872
$34.95
IHS1273
Lower Grille Shell Panel
Fits: 574, 674 & 2500A series
Replaces: 402427R1
(6-9/16" tall x 16-7/16" long)
USA made NOTE: Primed gray.
Front grilles w/ screen - USA made
$155.65 Lower Grille Support Housing
For best results fit to tractor before painting.
Fits following w/ cast iron or fabricated steel
bolster w/ 4 side mounting holes: IH 484, IH
485 both w/ 2 wheel drive; Some 584, 684,
784, 884; 585, 685, 785 & 885 (All w/ 4 wheel
drive and up to 1985), Replaces: 3121231R1
(20-1/2" wide x 19 3/4" tall) USA made
NOTE: Parts are gel coated with a wax
release agent on surface. We recommend
a wet sand w/ fine paper prior to painting.
The release will not allow paint to adhere.
Measure before ordering.
IHS702
$127.90 Front Grille w/ Black Metal Screen Insert
IHS1110
$106.95
IHS604
(Plastic)
IHS610
(Steel)
IHS609
$138.95 Headlight Support Panel (Upper Grille)
Order #
Price
IHS316
$595.00
IHS302
$595.00
Fits: 354, 364, 454, 464, 574 & 674
Industrials: 2300A, 2400A & 2500A
Replaces: 537496R1
(20" tall x 16-1/4" wide)
NOTE: Silver plastic. For tractors with grille
mounted lights.
Grille Screen
Fits: 666, 686, Hydro 70 & Hydro 86
Replaces: 65492C1
(19-7/16" tall, 20-5/16" wide, 1" thick)
USA made
Fits: Super A SN: 356001 & up & Early A-1 up
to SN: 356000; Will also fit A SN: 41330 & up
& Super A up to SN: 355669, but has keyway
Replaces: 362455R91
NOTE: Hole on top section has keyway to
fit radiator neck w/ overflow tube.
17" tall center section. Asymmetrical bottom
section.
Fits: B & BN (Both SN: 40193 & up)
Replaces: 58140DAX
NOTE: If tractors have been updated w/
water pump (pressurized system) then use
IHS322. 17" tall center section. Symmetrical
bottom section.
IHS322
$595.00
Fits: C
fit radiator neck w/ overflow tube. 17" tall
center section. Symmetrical bottom section.
$120.70
Front Grille
Fits: 766, 786, 886, 966, 986, 1066, 1086, 1466,
1468, 1486, 1566, 1568, 1586, Hydro 100 &
$186.30 Hydro 186, Replaces: 531231R1
IHS604 NOTE: Gray plastic.
IHS610 NOTE: Chrome plated; Steel.
Application
IHS304
$595.00
Fits: Super C
Replaces: 356364R92
fit radiator neck w/ overflow tube. 18.5" tall
center section. Symmetrical bottom section.
$55.50
Screen only
Replaces: 531233R2
234
Front grille sections - USA made
NOTE: The following are the top, center, bottom sections
only (Sold separately) of IHS300, IHS316, IHS302, IHS322,
IHS304 Front Grilles.
Order #
IHS306
Price
$165.00
Order #
Top Section only
Fits: A, (Super A up to SN: 355669) B & BN
(All w/out water pumps)
IHS318
IHS308
$165.00
Top Section only
Fits: Super A SN: 356001 & up, Super A-1,
C & Super C
NOTE: Fits A, B, BN w/ radiator neck w/
exterior overflow tube.
IHS376
$213.25
IHS514
$358.95
IHS312
$180.00
IHS314
$199.95
$199.95
NEW! Bottom Section only
Fits: 100, 130, 200, 230
Replaces: 362584R91 (whole grille);
362586R91 (for models 200, 230) USA made
Hoods - USA made
IHS515
$249.95
Hood (2 Hole) w/ Hook & Spring Hardware
Fits: 140
Replaces: 368761R21
Hood hardware
Order #
Price
IHS319
$56.65
Hood Hardware Kit
Fits: A, B, C & Supers, 100, 130, 140, 200 & 230
Replaces: 58146D (LH) & 58147D (RH)
USA made NOTE: Kit includes: (2) LH
j-hooks, (2) RH j-hooks, (4) springs, (4) cotter
pins & (8) washers.
IHS1588
$14.50
IHS773
$1.05
IHS439
$2.00
NOTE: Hoods do not have emblem holes.
IHS471
Hood w/ Hook & Spring Hardware
Fits: C & Super C
Replaces: 351090R11
(26-3/4" long)
Hood (3 Hole) w/ Hook & Spring Hardware
Fits: 100, 130, 200 & 230
Replaces: 362503R22
Bottom Section only
Fits: A SN: 41330 & up, Super A
& Super A-1
Bottom Section only
Fits: B, BN, C & Super C
Order #
$395.00
Center Section w/ Screen only
Fits: Late Super A-1 SN: 356001 & up;
Super C
(18-1/2" tall)
IHS1657
Price
$395.00
Center Section w/ Screen only
Fits: A, Super A, Early A-1 up to SN: 356000,
B, BN & C
(17" tall)
IHS310
Hoods cont...
Price
$213.25
Hood w/ Hook & Spring Hardware
Fits: A, B, BN & Super A
Replaces: 58144DX
(25-1/2" long)
IHS448
$1.95
J-hook fits: H, M & Supers, I & W4, W6 series
gas, diesel USA made
NOTE: Includes: (1) J-hook, (1) spring & (1)
cotter pin. 4 used; Sold individually.
Hood Wing Nut fits: M & Supers gas, diesel
Replaces: Q3506, 103129 & 126032
NOTE: Fastens rear of hood to gauge panel.
Hood Bolt (Truss Head w/ Washer)
Fits: 300, 330, 340, 350, 400 & 450
IHS439: 5/16" - 18NC Coarse Thread
IHS448: 5/16" - 24NF Fine Thread
Hood hardware continues on next page
235
Hood hardware cont...
Order #
Price
IHS1557
$10.65
Hood hardware cont...
Order #
Price
IHS946
$1.60
IHS973
$4.25
IHS1245 $4.35
Cage Nut fits: Farmall Cub SN: 210001 & up,
IH Cub SN: 10001 & up, 140, 154, 184, 185,
240, 300, 330, 340, 350, 400, 404, 424, 444,
450, 454, 460, 464, 484, 504, 544, 560, 574,
584, 606, 656, 660, 674, 684, 706 thru 1206,
756 thru 1456, 826, 1026, 766 thru 1568, 786
thru 1586, Hydro 100 & Industrial versions
Replaces: 88592, 131883, 363885R1,
459063R1 & 1502286C1
(5/16"-18 NC) NOTE: Sold individually.
Hood & Sheet Metal Retaining Shoulder Bolt
Fits: 544, 656, 666, 686, 706 thru 1586
Hydros: 70 thru 100 Replaces: 373483R1
(5/16" dia. x 11/16" length, shoulder bolt w/
9/16" hex head) USA made
Restoration quality
Description
Hood & Sheet Metal Bolt w/ Washer
Fits: 544, 656, 666, 686, 706 thru 1206,
756 thru 1456, 826 & 1026; Hydros: 70 & 86
Replaces: 389427R91
(5/16"-18 NC x 3/4") USA made
IHS1365 $3.55
Hood & Sheet Metal Bolt
Fits: 544 thru 686, 706 thru 1456,
766 thru 1586; Hydros: 70, 86, 100 & 186
Replaces: 385157R1
(5/16"-18 NC x 5/8" flanged hex head)
USA made NOTE: Has recess in center of hex
head w/ correct finish. Sold individually.
IHS1288 $15.95
NEW! 1/4 Quick Release Fastener Nut
Fits: 140 up to SN: 23300 (2 used on grille);
240, 340, 460, 560 & 660 (2 used on grille
& 4 used on side panels)
IHS1285 $5.85
IHS919
236
$9.10
Flanged Hex Head Bolt
Fits: 340, 385, 460, 484, 560, 660, 786, 886, 986,
1086, 1486, 1586, Hydro 186, 3388, 3588, 3788,
Replaces: 369918R1, 463-42510
(1/4"-20 NC thread x 5/8") USA made
NOTE: Sold individually. Go to website for
application details.
Knurled Hood Fastener
Fits: 460, 560, 660
Replaces: 374240R1 (fastener), 372689R1
(retainer)
(1/4"-20 NC thread, 1.315" o/a length)
USA made NOTE: Silver zinc.
NEW! Slotted Thumb Screw w/ Retainer
Fits: 404, I504, 544, 656, 706, 756, 806, 826, 856,
1026, 1206, 1256, 1456
Replaces: 376787R1 (retainer), 3112170R11,
377521R1,R3, 389872R1 (screw)
(5/16"-18 x 3/4", 1.100" o/a length,
.775" dia. head) USA made
NOTE: Retains lower hood side panels.
4 used per tractor; Sold individually.
Hood extensions
Fits: (Red) Cub up to SN: 210000
& Cub Lo-Boy up to SN: 10000
Replaces: 350985R11, 350984R11,
373884R11 & 373883R11
USA made • New & improved!
Order # Price
Hood Extensions (Dog Legs), Pair...................... IHS190................$58.95
NOTE: Sold as a LH / RH pair.
Fits: Farmall Cub (1947-63)
& IH Cub Lo-Boy (1955-63)
Replaces: 120221 (screw);
106497 & 80684 (washer)
Description
Order # Price
Round Head Screw................................................ IHS955................$0.50
& Washer for Hood Dog Legs
NOTE: Stainless. 4 used per dog leg (8 per tractor); Sold individually.
Side panels, parts
Order #
Price
IHS192A
(w/
Exhaust
Hole)
$348.50
IHS192B
(w/out
Exhaust
Hole)
$348.50
Side Panels, Pair
Fits: 10-20 McCormick Deering
(33-9/16" x 21-15/16")
IHS192A Replaces: 10679DX, 10680DX
IHS192B Replaces: 10680DX, 12171DX
USA made
NOTE: Sold as a LH / RH pair.
Side panels, parts cont...
Order #
Price
IHS1267
(LH)
$87.35
IHS1270
(RH)
IHS1126
(LH)
IHS1128
(RH)
IHS954
(LH)
IHS956
(RH)
IHS889L
(LH)
IHS889R
(RH)
$87.35
Front Side Panel
Fits: 484, 485, 584, 585, 684, 685, 784, 785 &
884; 885 w/ 4 wheel drive (All thru 1985);
(IH only NOT Case IH)
(11-1/2" tall x 14-3/8" at longest point)
USA made NOTE: Parts are gel coated
with a wax release agent on surface. We
recommend a wet sand w/ fine paper prior
to painting. The release will not allow
paint to adhere.
Front Lower Ribbed Side Panel
Fits: 560 & 660
(34-7/8" o/a length)
NOTE: Powder coat IH creme. Will fit F460
if trimmed to 31-1/2" & 1 hole drilled.
$42.95
$42.95
Side panels, parts cont...
Order #
Price
IHS887L
(LH)
$37.35
IHS887R
$37.35
(RH)
$38.95
$38.95
Rear Lower Ribbed Side Panel
Fits: F460, 560 & 660
(38-1/4" long, 6-5/8" wide)
IHS874
(LH)
IHS876
(RH)
$48.95
IHS855
(LH)
$50.45
$34.85
IHS857
(RH)
Rear Heat Baffle Shield
Fits: 1066, 1466, 1566 & Hydro 100
Replaces: 531507R1 (LH) & 531508R1 (RH)
(19" long x 6-1/4" wide)
USA made
NOTE: Bare metal.
$48.95
$34.85
Rear Heat Baffle Shield
Fits: 766, 966, 1468 & 1568
IHS899L Replaces: 531499R1
IHS899R Replaces: 531500R1
(19-3/4" long x 6-1/4" wide)
USA made
NOTE: Bare metal.
$50.45
Front Radiator Side Panel w/out Louvers
Serviceable for 574, 674 & 2500A series
IHS874 Replaces: 402458R2 & 3116779R1
IHS876 Replaces: 402459R1 & 3116780R1
(13-1/4" tall x 13-1/4" tapers to 9-1/2" wide)
USA made NOTE: Primed gray.
Front Radiator Side Panel w/out Louvers
Fits: 786, 886, 986, 1086, 1486, 1586 & Hydro
186; Serviceable for 766, 966, 1066, 1466,
1468, 1566, 1568 & Hydro 100
USA made NOTE: Primed.
237
Air cleaner parts cont...
Order #
Price
Caps cont...
IHS394
(2" I.D.)
Air cleaner parts
Order #
Price
5-1/4"
Caps
IHS982
$24.95
IHS984
$21.35
IHS391
(1-3/8" I.D.)
Air Cleaner Cap w/ Reinforcing Washer
Fits: 10-20, 15-30, 22-36, Regular, F20, F30,
T20, TD35, W30, WD40 & WK40
Replaces: 11196D (cap) & 17190D
(reinforcing washer)
(6-3/16" O.D. x 3-7/32" tall,
3" O.D. x 1/4" tall) USA made
NOTE: Bare steel.
Air Cleaner Cap
Fits: F12, F14, I12, I14, W12 & W14
Replaces: 23647D
(3-5/8" O.D. x 2-1/2" tall) USA made
NOTE: Weld to existing pipe. Bare steel.
$24.95
4-1/8"
Air Cleaner Cap
Fits: Cub, Cub Lo-Boy, A, AV, B, BN &
Early Super A up to SN: 355669
Replaces: 350750R91
IHS392
$24.50 (IHS391 fits outside of pipe.
4-1/8" body diameter)
(1-1/4" O.D.)
(IHS392 fits inside of pipe for
3.06"
Supers & Late Cub. 3.06" body diameter)
IHS390
(1-3/4" I.D.)
$28.95
Air Cleaner Cap
Fits: H & Supers, I, O & W4,
300 & 350 gas, diesel
Replaces: 355935R91 & 353019R92
IHS388
(1-7/8" O.D.)
(IHS388 fits inside of pipe for Supers &
4-1/8"
later. 4-1/8" body diameter)
IHS393
(2-1/4" I.D.)
$28.25
5-1/4"
Air Cleaner Cap
Fits: M, MTA & Supers, I, T & W6,
400 & 450 gas, diesel
Replaces: 49357DA & 353018R92
IHS620
(2-1/8" O.D.)
5-1/4"
IHS282
$42.00
ABC1826
$39.95
$25.50
4-1/4"
Air Cleaner Cap
Fits: Late Super A SN: 356001 & up,
Super A1, C, Super C, 100, 130, 140,
200, 230, 240 & 340 (All w/ Donaldson
or United Specialties Air Cleaner)
Replaces: 351189R91, 351190R91
IHS597
$24.95 & 361723R91
(1-5/8" O.D.)
(IHS390 fits outside of pipe.
1-5/8"
238
Air Cleaner Cap
Fits: 340, 404, 424, 504 gas, 444, 2424 &
2444, Replaces: 353019R92
(2-1/8" O.D., 2" I.D.)
NEW! Air Cleaner Cap
Fits: 460, 560, I656, 660
Replaces: 361722R91, 365316R91
(2-1/2" I.D., 5-1/4" O.D., 4" tall)
NOTE: Black finish.
Oil cups, clamps
IHS179
$19.95
IHS181
$9.95
Air Cleaner Oil Cup
Fits: A, AV, B, BN & Early Super A up to
SN: 355669
Replaces: 52871D
(4-7/16" O.D. at lip; 4-1/16" I.D.)
Clamp
Replaces: 52872D
Order #
Price
Oil cups, clamps cont...
FDS034
FDS081
JDS540
JDS541
$14.95
$10.30
$27.50
$12.15
Air Cleaner Oil Cup
Serviceable for Late Super A SN: 356001
& up, C, Super C, 100, 130, 140, 200 & 230;
Crawlers: T4 & T5
(All w/ Donaldson air cleaner)
Replaces: 352597R91
(4-3/4" O.D. at lip; 4-7/16" I.D.)
Clamp
Serviceable for same as FDS034
(All w/ Donaldson air cleaner)
Replaces: 66357DA
Air Cleaner Oil Cup
Fits: H, I, O, W4 & Supers, series 300,
350, F, I & 340 w/ Donaldson Air Cleaner,
404, 424 & F504, Replaces: 52864DA,
362974R91, 375550R91 & 378333R1
(5-3/8" I.D.)
Clamp
Fits: Same as JDS540
Replaces: 52865D
Order #
Price
Miscellaneous
ABC1765
$14.95
IHS967
IHS1504
ABC422
$18.00
$34.95
$34.95
$12.50
Air Cleaner Pipe
w/ IH carburetor
Replaces: 350752R1
NEW! Air Cleaner Pipe
Fits: H, HV, I4, W4
Replaces: 51437D
(1-3/4" O.D., 12-3/4" o/a length)
NEW! Air Cleaner Pipe
Fits the following gas, LP: M, MV, Super
M, Super MV, MTA, Super MV-TA, (Super
W6 SN: 3951 & up), Super W6-TA, 400,
450, W400, W450, Replaces: 51441D,
357028R1 (2-1/4" O.D.)
Air Cleaner Oil Bath Filter Element
(3" wide x 78" long)
NOTE: Replaces: the mesh in existing air
cleaners. Sold by the bag (Normal utility
air cleaners will use 2 bags).
Order #
Price
$4.50
Pre-Cleaner Cap Assemblies, Parts
ABC1824
$49.95
ABC383
$74.95
ABC512
$74.85
JDS741
$99.95
ABC470
$29.95
ABC510
$64.60
Hose
FDS261
NEW! Dust Unloader Valve (Vacuator
Valve) (For Dry Air Cleaners)
Fits: 656 thru 4586 using 3" unloader valve Replaces: 383734R2, 625043C1
Pre-cleaner parts
Pipe, filter element
IHS215
Air Cleaner Hose fits: Farmall Regular,
F12, F14, F20, F30, 10-20, 15-30, 22-36, T20
& W30, Replaces: 11337D
(2" I.D. x 2-1/4" long)
NOTE: Carburetor to air cleaner.
NEW! Pre-Cleaner Cap Assembly
Fits: B275, 340, 350, 404, 424, 444, 504 gas,
3414 using 2" I.D. base & 5-1/2" bowl
Replaces: 407076R91 (2" I.D. plastic bowl,
5-1/2" precleaner O.D.)
Pre-Cleaner Cap Assembly
Fits: M, MD, Super M, Super MD, MTA,
400, 450, 504 diesel, W400 & W450
w/ 2-1/4" I.D. base & 7" bowl
Replaces: 365261R91, 379670R91
Fits: WR9S, Super WD9, WDR9,
460, 560, 600, 606, 650 & 660 & others
w/ 2-1/2" I.D. base & 7" bowl
Replaces: 365262R91
w/ 3" I.D. base & 7" bowl
Replaces: 321190R91
NOTE: Cast aluminum base. Brass nut.
w/ 3" I.D. base & 7" bowl
Replaces: 321190R91
Fits: IH / Farmall models 1026, 1206, 1256,
1456 w/ 4" I.D. base & 10-1/2" bowl
Replaces: 321262R91
Pre-cleaner parts continue on next page
239
Pre-cleaner parts cont...
Order #
Price
Pre-Cleaner Cap Assemblies, Parts cont...
JDS938
Pre-cleaner parts cont...
Order #
Price
$4.95
Pre-Screener Clip & Springs Kit
(For JDS535 Screen)
NOTE: Powder coat green.
Pre-Cleaner Cap Assemblies, Parts cont...
ABC554
ABC484
$42.80
$24.95
Pre-Cleaner Cover (5-1/2" dia.)
w/ Brass Knurled Nut fits: Some Super
A, C, Super C, 100 thru 240, B275, F300,
340, F350, 404, 424, 444 & I544, Replaces:
362999R91 USA made NOTE: Aluminum.
Pre-Cleaner Bowl
Fits: Some Super A, C, Super C, 100 thru
240, B275, F300, 340, F350, 404, 424, 444 &
I544, Replaces: 363000R1
(5-1/2" dia.)
NOTE: Clear plastic.
ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom
= 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16", Overall
height = 3-9/16"
JDS559
$24.95
Pre-Cleaner Cover (7" dia.) w/ Brass Nut
(For ABC338)
NOTE: Green metal.
ABC338
$14.95
Pre-Cleaner Bowl
Fits: Some H, M & Supers, W6 to 9 series,
400, 450, 460, 504, 544 diesel, 560, 600, 606,
650, 660, 2504, 2544 diesel & 2606;
Gas powered Combines: 403 & 453
Hillside, 503, 615 & 715 Replaces:
365413R1, Can replace Donaldson bowl
PO20227 NOTE: Clear plastic.
ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3",
Cone I.D. at top = 3-1/2", Overall height = 4-1/8"
JDS557
JDS561
JDS535
240
$68.95
$75.00
$39.95
Pre-Cleaner Base
(For ABC338 Bowl & JDS559 Top)
Fits: All Donaldson Pre-Cleaners
w/ 3" base
NOTE: Metal. Check size before
ordering.
Pre-Screener w/out Screen
Fits: 504, 544, 560, 606, 660, 2504, 2544 &
2606; Combines: 403, 503, 615 & 175, All
Donaldson pre-cleaners w/ 3" base
Check size before ordering.
Screen w/ Clip & 2 Springs
(For Pre-Screener)
Fits: Same as JDS561 & other International
models w/ 7" dia. pre-cleaner bowl
Replaces: 378724R1
(5-1/4" x 19-3/8")
ABC339
$14.95
Pre-Cleaner Bowl (10-1/2" dia.)
(For 3" to 4" base)
For air intake on diesel models: 1026, 1206,
1256, 1456, 21026, 21256 & 21456
Replaces: 277377R1, Can replace
Donaldson bowl PO16330
NOTE: Clear plastic.
ABC339 specifications: Bowl O.D. at top = 10-1/2",
Bowl side height = 3", Cone I.D. at top = 5-9/16", Overall height = 4"
Donaldson pre-cleaner assemblies
Order #
Price
IHS678
$99.95
Donaldson Pre-Cleaner Assembly
w/ Glass Dust Jar, Gasket & Decal
Fits: Cub, A, B & Super A up to SN: 355669
(All w/ 1-3/8" I.D. base)
Replaces: 356254R91 & 59206D, Donaldson
X-1596-A NOTE: May need to lengthen air
cleaner pipe for some applications.
IHS681
$99.95
IHS679
$14.95
IHS681GK
$3.00
DEC447
$4.50
Fits: Super A SN: 356001 & up, Super A-I,
C, Super C, 100, 130, 140, 200, 230, 240 &
340 (All w/ 1-3/4" I.D. base)
Replaces: 352612R91
Dust Jar only (Ball brand)
(For IHS678 & IHS681)
Replaces: 64178D & Donaldson P-2647
(2-5/8" O.D. thread, 3-1/8" tall)
Gasket only
(For IHS678 & IHS681)
Replaces: 64177D
(2.550" O.D.)
Decal only
IHS717
$99.95
gas, diesel (All w/ 2" I.D. base)
Replaces: 59095D
Donaldson pre-cleaner assemblies cont...
Order #
IHS719
Price
$99.95
IHS727
$14.95
IHS717GK
$3.00
DEC447
$4.50
Fits: M, MTA & Supers, I, O, W-6, 9 series
gas, diesel, 400 & 450
(All w/ 2-1/4" I.D. base)
Replaces: 59096D
Dust Jar only (Ball brand)
(Fits IHS717 & IHS719)
Replaces: 54082D
(3-1/4" O.D. thread, 3-7/8" tall)
Gasket only
(Fits IHS717 & IHS719)
Replaces: 66776D
(3.200" O.D.)
Fuel tank parts cont...
Order #
Price
ABC494
$4.50
Fuel Tank Webbing (3' long)
Fits: Tractors using webbed insulation
between fuel tank mounts & other sheet
metal parts (3' L x 1" W x .042" thick)
NOTE: Economy black woven nylon.
Can be glued or riveted.
ABC1823
$4.95
NEW! Fuel Tank Webbing (3' long)
Fits: Tractors using 1" wide webbing for fuel
tanks & other sheet metal parts
(3' L x 1" W x .050" thick)
NOTE: Black canvas, mildew resistant.
ABC1656
$5.25
Fits: Tractors using 1-1/2" wide webbing for
fuel tanks & other sheet metal parts
(3' L x 1-1/2" W x .050" thick)
ABC1827
$5.50
Fits: Tractors using 2" wide webbing for fuel
tanks & other sheet metal parts
(3' L x 2" W x .050" thick)
MIS1123
$1.80
Slotted Hex Nut
Fits: H, HV, Super H, Super HV, M, MTA,
MD; W, I, O 4 & 6 series; WD9 & Super W9
Replaces: 125357, 272071 & 272312
(7/16"-20 NF, grade 5)
NOTE: Zinc plated. 3 used per tractor;
Sold individually.
Decal only
Wittek© tower (hose) clamps
Original Style
Wittek© Tower (Hose) Clamp
Fits: IH / Farmall models USA made
Order #
Price
Dimension
IHS636
$3.50
.775" - 1.013" size range
IHS637
$3.50
1.687" - 1.780" size range
IHS638
$3.75
1.815" - 2.001" size range
IHS639
$3.75
1.807" - 2.285" size range
IHS640
$3.75
2.175" - 2.500" size range
IHS641
$3.75
2.400" - 2.625" size range
IHS642
$3.75
2.350" - 2.765" size range
IHS643
$4.35
2.685" - 2.995" size range
Fuel caps, gaskets
Order #
IHS226
Price
$9.95
Fuel tank parts
Order #
IHS536
ABC455
Price
$2.00
EACH
Fuel Tank Insulating Pad
Fits: H, M, MTA & Supers, I, O, W-4, 6, 9
series gas, diesel, I9, Hydro 70, Hydro 86, 200,
230, 240, 300, 330, 340, 350, 400, 404, 424, 444,
450, 460, 504, 544, 560, 600, 606, 650, 656, 660,
664, 666, 686, 706, 756, 766, 826, 856 & 966,
Replaces: 51121D & 60671D (1-1/2" O.D.)
$2.95
EACH
Underside View
IHS416
Fuel Tank Mounting Pad
(2" x 2", 1/4" thick)
$29.95
Vented Fuel Cap w/ IHS239 Gasket
Fits: F12, F14, F20, F30, 10-20, 15-30, W-30,
Cub, A, B, C, H, M, MTA & Supers, 100, 130,
200, 230, 300, 350, 400, 450, 600, 650, All I, O,
W series, Replaces: 23995DA
(2-11/16" I.D., 5/8" height)
NOTE: Says "Buy Clean Fuel-Keep It Clean".
Triple Baffle Fuel Cap
Fits: Cub, A, B, C, H, M, MTA & Supers, 100,
130, 140, 154, 184, 185, 200, 230, 240, 300, 330,
340, 350, 400, 404, 424, 444, 450, 460, 504, 544,
560, 600, 650, 656, 660, 664, 706, 756, 766, 806,
826, 856, 886, 966, 986, 1066, 1086, 1206, 1256,
1456, 1466, 1468, 1486, 1566, 1586, Hydro 86,
Hydro 100, All I, O & W series gas, diesel
Replaces: 361910R1 & 23995DC
(2-7/8" O.D., 2-3/4" I.D., 2-1/2" height)
Fuel caps, gaskets continue on next page
241
Steel fuel lines cont...
Order #
Price
IHS945
$29.25
IHS948
$33.95
Fuel caps, gaskets cont...
Order #
Price
IHS239
$1.95
Gasket only (For IHS226 & IHS416 Caps)
Replaces: 23997DB
(2.687" O.D., 1.875" I.D., .185" thick)
USA made
IHS577
$9.00
Starting Tank Fuel Cap w/ Gasket
Fits: F12 thru F30; H, M & Supers, I, O, W-4,
6, 9 series, 200, 230, 240, 300, 350, 400, 450, 600
& 650 (All w/ distillate or starting tanks for
diesels), Replaces: 40756D
(1-3/4" I.D., .350" height)
NOTE: One gallon starting tank fuel cap.
Says "Buy Clean Fuel-Keep It Clean".
Underside View
JDS193
$24.95
Underside View
IHS338
$8.50
Underside View
Order #
Price
IHS1577
$78.95
1/4"
IHS713
$68.95
3/8"
Steel fuel lines
Fit fuel strainer to carburetor.
Order #
IHS937
Price
$31.45
Application
(For 5/16" Fittings)
Fits: Super A, Super AV,C, Super C, 100 & 200
gas, Replaces: 350623R11 & 356355R11
IHS939
$24.95
(For 5/16" Fittings)
Fits: A, AV, B, BN gas only
Replaces: 51498DX & 58137DX
NOTE: Will not fit tractors w/ two fuel tanks.
IHS1487
$40.75
NEW! Fits: H gas only
Replaces: 56451DX
(25" long) USA made
NOTE: Will not fit tractors w/ two fuel tanks.
IHS941
$35.50
IHS943
$26.10
242
Fits: IH 400, 450 w/ 18 gallon fuel tank, W400
& W450 gas
Replaces: 362558R11
Fits: IH 400, 450 w/ 21-1/2 gal fuel tank, W400
& W450 gas
Replaces: 365339R11
Sediment bowl assys., parts
Fuel Cap w/ Gasket
Fits: T20 & W30
Replaces: 22785DA
NOTE: Must drill vent hole into cap.
Starting Tank Fuel Cap w/ Gasket
Fits as alternate cap to IHS577, but does not
have correct appearance
(1-3/4" I.D., 1-3/8" tang to tang)
NOTE: Has (2) tangs on top mounted from
center out.
Application
ABC281
$34.45
All-Fuel Sediment Bowl Assembly
w/ 1/4" pipe inlet
(For tractors w/ two tanks)
Fits: Regular, 10-20, 15-30, F12, F20, F30, W30,
W40, Early H, M, O & W 4, 6 series
Replaces: 17237D, 17237DA USA made
NOTE: View website for full serial number
breaks.
All-Fuel Sediment Bowl Assembly
w/ 3/8" pipe inlet
(For tractors w/ two tanks)
Fits: A, B & C; Will also fit H & HV (both
SN: 50866 & up); I4; O4 & W4 (both SN:
1130 & up); I6; O6 & W6 (both SN: 1317 &
up); M & MV (both SN: 24215 & up) All w/
purchase of 90º elbow (elbow not supplied
by STP, Inc.); 100, 130, 140, 200 & 230 (All w/
All-Fuel), Replaces: 17215DA, 58361DAX,
51495DD, 370831R91
(2) 5/16" compression outlets) USA made
Sediment Bowl Assembly
Fits: H, M, MTA & Supers, I, O, W-4, 6, 9
series gas, diesel, F300, 340, 350 & F350;
Fits the following gas only: 400, 450, 460,
460 INT, 504, 544, 560, 606, 656, 656 INT,
606, 660, 706, 756, 766, 806, 826, 856, 2504,
2606, 2656, 2706, 2756, 2826 & 2856
Replaces: 370832R91
(3/8" pipe inlet, 1/8" pipe outlet)
Fits: Super H & HV gas
(Both up to SN: 19233)
Replaces: 58367DAX
Fits: M, MV, Super M (All w/ gas);
The following w/ All fuel: M & MV (both w/
SN: 24215 & up), Super W6 (SN: 3951 and up)
Replaces: 60684DX, 56512DX & 58363DX
ABC124
JDS642
ABC229
ABC534
ABC236
ABC1422
IHS713, IHS1577, ABC281 components
The following parts (Sold separately) will fit IHS713,
IHS1577, ABC281 Sediment Bowl Assemblies:
Order #
Price
Description
ABC124
$4.95
Glass Bowl, Replaces: 357957R1
(2-1/8" O.D., 2.370" L)
JDS642
$1.10
Gasket, Replaces: 360679R1
(2.150" O.D.) USA made
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
ABC236
$6.05
Bail Assembly w/ Brass Nut
Replaces: 17564D (2-1/8" O.D., 2.370" long)
ABC1422
$9.60
Auxiliary Sediment Bowl Filter
(1.740" O.D. x 1.063" long x .460" I.D.)
Fuel filters, parts
Order #
Screen
Replaces: 49923D
(3/8" diameter center hole)
NOTE: Installs in IHS713 when you need extra
filtration w/out cutting the existing fuel line.
ABC092
ACS326
$27.30
Fits: Cub, Cub Lo-Boy, A, B, C & Supers,
100, 130, 140, 154, 184, 185, 200, 230, 240,
I300, 330, (340, I350 gas), 404, 454, (460 INT
gas), 464, (504, 544 gas), 574, (606, 656 INT
gas), 674, 2400A, 2404 & 2500A
Replaces: 38465D, 355142R91, 369988R91,
61782C91 & 354222R91
(3/8" pipe inlet, 1/8" pipe outlet,
Includes 5/16" compression adaptor fitting)
$32.10
Price
ABC490
$6.45
ABC1423
$35.45
ABC1421
$4.95
EACH
Diesel Fuel Filter Element w/ Seals
(For Cav/Simms diesel fuel filters)
Fits: B414, 354, 364, 384, 385, 444, 454, 484,
485, 574, 584, 585, 674, 684, H84, 685, 784,
785 & 885, Replaces: 3044506R93 & Cav #
7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall)
ABC1315
$8.50
Fuel Tank Screen
Fits: Most IH/Farmall models w/ stem style
sediment bowl; Will fit ABC092, ABC281,
ACS326, IHS713, IHS1577 sediment bowl
assemblies (.375" screen O.D., .216" pipe O.D.,
2.530" o/a length) USA made
NOTE: Slides on top of sediment bowl inlet
to prevent dirt from the fuel tank bottom
from entering the sediment bowl assembly.
IHS1578
$34.95
NEW! Bail (For Fuel Strainer/Water Trap)
Fits the following diesels: MD thru Super
WD9, TD6 thru TD14, 400, 450, 460, 560, 600,
606, 650, 660, Replaces: 54760D, 60878DX,
165373H1, 370785R91
(5" tall, 3-1/8" wide)
IHS1574
$24.95
NEW! Glass Bowl (For Fuel Strainer/Water
Trap) fits the following diesels: MD thru
Super WD9, TD6 thru TD14, 400, 450, 460,
560, 600, 606, 650, 660, Replaces: 54764D,
60877D, 62164D, 370783R1
(2-7/8" O.D., 4" long)
ABC1221
$4.95
Fits: 424, 444, 2424 & 2444
Replaces: 614421R91
(1/8" x 1/8" female pipe thread)
ABC123
ABC039
ABC229
ABC534
ABC563
ABC092 & ACS326 components
NOTE: The following parts (Sold separately) will fit ABC092
& ACS326 Sediment Bowl Assys:
Order #
Price
Description
ABC123
$2.90
Glass Bowl
Replaces: 357958R1
(2-1/8" O.D., 1.280" L)
ABC039
$0.90
Gasket, Replaces: 360679R1
(2" O.D.) USA made NOTE: Cork.
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
ABC563
$4.95
Screen
Replaces: 49923D
(3/8" diameter center hole)
Bail Assembly w/ Nut
Replaces: 49947DX
In Line Fuel Filter w/ Hose & Clamps
using 3/8" fuel line
NOTE: Must splice fuel line to use. Will
help to keep rust & dirt out of carburetor.
Diesel Single Fuel Filter Assembly
w/ Glass Bowl
Serviceable for B414, 354 & 364
Industrials: 2300A, 3414, 3444 & 7000
Replaces: 3043645R91
(4) 1/2" x 20 UNF ports
Gasket (For Fuel Strainer/Water Trap)
Fits the following diesels: MD thru Super
WD9, TD6 thru TD14, 400, 450, 460, 560, 600,
606, 650, 660, Replaces: 54763D, 60876D &
370520R1
(2.242" I.D., 2.948" O.D.) USA made
243
Throttle / governor controls, parts cont...
Order #
IHS490
Price
Saw Tooth Throttle / Governor Control
Assembly
Fits: H, M, MTA & Supers gas
Replaces: 51351DBX & 366727R91
Throttle / governor controls, parts
Order #
IHS587
Price
$49.95
Throttle / Governor Control Assembly
Replaces: 351005R1; 351006R1 (lever)
IHS616
IHS537
$14.95
Lever only
(For IHS587)
Replaces: 351006R1 Close out
IHS539
IHS540
IHS588
IHS617
IHS541
244
IHS603
$19.95
Lever only
(For IHS490)
Replaces: 51348DAX
IHS875
$5.25
IHS634
$6.95
IHS634N
$0.50
$45.95
Fits: A, B & BN
Replaces: 48259DX; 48260DA (lever)
IHS538
$14.95
Lever only
(For IHS537)
Replaces: 48260DA
Fits: Super A, 100 & 130
IHS035
Lever only
(For IHS539)
Replaces: 350612R2
FDS073
Fits: C, Super C, 200 & 230
IHS987
$6.50
Lever only
(For IHS588)
Replaces: 351327R2
Throttle / Governor Control Spring
Fits: Cub, Cub Lo-Boy, A, B, C
& Supers, 100, 130, 200 & 230
Replaces: 43650D
Repair Keyway w/out Nut
Fits: H, M, MTA & Supers gas (All w/
Square tooth throttle assy. / governor control
handle)
Replaces: 361245R1
$29.95
Gas Lever (M & W style) w/ FDS073 Friction
Disc & Spring
Fits: H, Super H, HV, M, Super M, MV, MTA
$3.50
Friction Disc only
(For IHS035)
USA made
$59.95
$15.50
Throttle / Governor Control Spring
(For IHS490)
Replaces: 51349D
(1.322" o/a length, .085" wire diameter,
.925" O.D.)
Nut only
$59.95
$18.00
$56.50
$4.95
Throttle Spring only
(For IHS035)
IHS892
$4.25
Throttle Friction Disc
Fits: 240, 274, 284, 340, 404, 424, 444, 454, 460,
464, 484, 504, 544, 560, 574, 584, 606, 656, 660,
664, 674, 684, 784, 884, 2400A, 2424, 2444,
2500A, 2504, 2544, 2656, H84 & 3444
Replaces: 369463R1, 388632R1, 394716R1,
399168R1 (.165" thick, 1.960" dia., .530" hole
dia.) USA made
Throttle / governor controls, parts cont...
Order #
Price
IHS1118
$115.95
IHS1116
IHS243
IHS1763
$59.50
$7.15
$17.95
Throttle Handle w/ Plug
Fits: 656, 706, 806, 1206, 4100, 4156, 4166
& 4186, Replaces: 382682R1, 391666R1 &
192105 (plug) (11-1/4" long x 1-3/8" wide x
1-7/8" thick, 1/2" shaft dia., 1/8" pin slot, 1"
plug dia.) USA made NOTE: Red w/ black
handle and nickel plug.
Upper Throttle Shaft w/ Nut
Fits: 706, 756, 806, 826, 856, 1026, 1206,
1256 & 1456D
Replaces: 404238R11, 382683R11
(11" long x 1/2" dia., 5/16" dia. on lock
nut end, 3/8" dia. on pin end)
USA made NOTE: Non coated steel.
Rubber Throttle Knob
Fits: 384, some 454, 464, 544, 574, 656, 666,
674, 686, some 756, 766, 826, 856, 966, 1026,
1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400,
2500, 2544, 2656, 2756, 2826, 2856, 4366
Hydros: 70, 86, 100, Replaces: 397931R2
NEW! Throttle Speed Indicator Plate
Fits: 766, 966, 1066, 1466, 1468, 1566, 1568,
Hydro 100, Replaces: 539232R1 (plate),
145372 (rivet) (7/8" wide x 3-3/4" long)
USA made NOTE: Stainless. Not used on
tractors w/ tilt steering.
Clutch parts cont...
Order #
Price
IHS701
$14.95
IHS804
$12.50
IHS882
$14.95
Clutch Spring
Fits: H, M, Super H & Super M up to SN:
60000, 04 thru ODS6, W4 thru WD6
Replaces: 49444DA
(6" o/a length)
IHS873
$9.95
Clutch Spring
Fits: Super M series SN: 60001 & up, Super
O6, W6 series, F300, F350, 400, 450, F460, 560
& 660, Replaces: 357164R1
(4" o/a length) NOTE: 4 used per tractor;
brake pedal (2), clutch pedal (1), TA handle
(1); Sold individually.
IHS880
$5.95
IHS687
$7.95
IHS006
$121.95
IHS645
$175.80
Clutch Spring
Fits: A, AV, B, BN, Super A, Super AV, 100,
130 & 140, Replaces: 47845DA
(6" o/a length)
Clutch Spring
Replaces: 351210R1
(5-3/4" o/a length)
Clutch Spring
Replaces: 350951R1
(4-1/2" o/a length)
Clutch parts
Order #
IHS627
IHS493
Price
$12.00
$18.95
Clutch Dust Cover
Fits: Cub SN: 35351 & up, A, B, C & Supers,
100, 130, 140, 200, 230, 240, 404 & 2404
Replaces: 57579DX
(2.025" O.D.)
NOTE: Mounts to side of housing.
Round Clutch Inspection Plate w/ Bracket &
Screw fits: Cub, some A, B, Super A, Super C,
100, 130, 140, 200, 230, 240, 404 & 2404
Replaces: 351486R1
(4-3/16" O.D.)
NOTE: Mounts under housing.
Check shape prior to ordering.
IHS494
$18.95
Oval Clutch Inspection Plate w/ Bracket &
Screw fits: Some A, AV, B, BN, Super A,
Super AI, C & Super C, Replaces: 57576DX
(3" x 4" O.D.)
NOTE: Mounts under housing.
Check shape prior to ordering.
IHS969
$11.95
Clutch Booster Cylinder Boot
Fits: 756, 766, 826, 856, 966, 1066, 1256, 1456,
1466, 1468, 1566 & 1568, Replaces: 57119C1
(5/8" top center hole, 1-1/4" bottom
opening) NOTE: 2 used per tractor;
Sold individually.
Clutch Pedal Return Spring
Fits: 544 & 2544
Replaces: 48599DA
(8-1/8" o/a length)
USA made
Clutch Shaft & Transmission Spline Shaft
(42-1/2" long) w/ Bushing
Fits: Cub (Not 154 & 184)
Replaces: 351534R21
Clutch Kit
Fits: Cub & Cub Lo-Boy (Not 154, 184 & 185)
Kit Includes: (1) - NEW Clutch Disc
(Rockford Style) (6-1/2", 10 spline, 15/16"
Hub, Woven disc), (1) - NEW Clutch Pilot
Bushing, (1) - NEW Pressure Plate
(1) - NEW Improved automotive style thrust
Throwout Bearing NOTE: Pressure plate
must be adjusted before installing engine
into chassis and also checked for throwout
bearing clearance after installation.
Clutch parts continue on next page
245
Order #
Price
ABC1425
$74.95
Pressure Plate only
Woven Clutch Disc
Fits the following w/ Rockford clutch: F20,
I6, ID6, M, MD, Regular SN: 39405 & up,
T20, W6 & WD6, Replaces: 14736D, 23573D,
52848D & 52848DA
(11" O.D., 10 splines, 1-1/2" spline I.D.)
IHS730
$12.95
Clutch Pilot Bushing
Replaces: 251266R1
(0.815" O.D., .625" I.D., 1.057" length)
NOTE: Fits in crankshaft flange.
Clutch Disc only
IHS1197
$7.95
Clutch Pilot Bushing
Fits: Cub Lo-Boy 154, 184 & 185
Replaces: 404666R1
(.625" I.D., .875" O.D., .750" long)
NOTE: Bronze.
IHS1541
$15.60
NEW! Clutch Housing Inspection Cover
Replaces: 351485R2
USA made
IHS015
$49.95
Throwout Bearing
Replaces: 350921R11
Original graphite style
NOTE: Must recheck clutch adjustment &
clearance after installation.
9" Clutch Kit
Fits: A, B, C series & Supers, 100, 130, 140,
200, 230, 240 & 404, Replaces: 56631DB
& 375695R92 (clutch); 18567D, 55212D
& 361292R91 (thowout brg.); 375493R1,
353242R92, 384383R91 & 375547R91 (press
plate); 43291D & 364527R91 (pilot bushing)
(9" diameter, 3 lever, 6 spring pressure plate,
.500" wide at tip of fingers)
NOTE: Older models may require the
purchase of a new style throw out bearing
sleeve (IHS1155) if the tractor is equipped
w/ a carbon (non-turning) throw out
bearing.
IHS1643
$58.50
NEW! Throwout Bearing
w/ NEW Improved Automotive style Thrust
Bearing
Fits: Cub, Cub Lo-Boy (NOT 154 & up)
Replaces: 350921R11
NOTE: Must recheck clutch adjustment &
clearance after installation.
IHS498
$29.95
NEW! Clutch Release Bearing Carrier
(For Replaceable Throw Out Bearing)
Fits: A, B, C & Supers, 100, 130, 140, 200, 230,
140, 404, Replaces: 6116D
NOTE: Bearing not included. This is the
part referenced in IHS958 description for
clutch bearing.
IHS1497
$12.65
NEW! Clutch Release Yoke Pivot Pin
Replaces: 350948R1
(0.373" dia, 5.695" length) USA made
NOTE: Improved design using 4140 steel.
IHS785
$72.60
Throwout Bearing w/ Release Carrier
Fits: Cub Lo-Boy 154, 185
Replaces: 404671R1
(2.160" o/a length)
NOTE: Will not fit 184.
ABC1437
$7.75
Clutch Alignment Tool
(15/16" spline O.D., 10 splines, .625" pilot)
Order #
Price
ABC550
$85.65
MHS076
IHS1861
$36.95
$49.95
IHS1864
$114.95
IHS958
$299.95
IHS1155
IHS1438
246
$64.95
$78.95
NEW! NEW Clutch Disc only
Fits: 154, 184, 185
Replaces: 404640R93
(5-1/2" O.D., 10 splines, 0.937 spline dia.)
NEW! NEW Pressure Plate only
Fits: 154, 185
Replaces: 404639R94
(5-1/2" O.D., 3 spring)
Woven Clutch Disc
Fits the following w/ Rockford clutch:
H, HV, W4 & I4
(10" O.D., 10 splines, 1-1/4" spline I.D.)
Clutch Release Yoke, Pair
Fits: Cub SN: 32229 & up & Cub Lo-Boy
Replaces: 353239R2 (LH), 353240R2 (RH)
USA made NOTE: Sold as a LH / RH pair.
Order #
Price
ABC496
$19.95
IHS323
$34.95
IHS1364
$13.55
Torque Amplifier Release Bearing
Fits: 300, 330, 340, 350, 400, 450, 460, 504, 544,
560, 606, 660, 656 & 666
Replaces: 362028R91
IHS011
IHS012
Price
$55.00
$70.00
2nd & 3rd Sliding Gear
Replaces: 350868R1
NOTE: 17 & 26 teeth.
Newer 2nd & 3rd Sliding Gear
Fits: Cub SN: 192113 & up, Cub Lo-Boy 154,
184 & 185, Replaces: 364520R1
NOTE: 16 & 26 teeth.
$32.50
ABC1503
$7.65
IHS187
$225.00 4th & 5th Slider Gear
Price
NEW! Top Transmission Shaft Seal
Fits: A, B, C & Supers, 100, 130 140, 200, 230,
240, 404, Replaces: 21969D, 381907R91,
42177D
(1.600" I.D., 2.378" O.D., .308" wide)
1st & Reverse Slider Gear
Fits: 544, 664, 2544, 656, 2656, 666 & 686,
Replaces: 388165R1
NOTE: 14 splines, 57 teeth.
NEW! Transmission Counter Shaft Seal
Fits: M, MD, (Super M, Super MD both up to
SN: F52627 & up to SN: L512541)
Replaces: 358784R91, 358823R91, 381907R91,
50839D
(1.600" I.D., 2.378" O.D., .308" wide)
ABC1503
$7.65
IHS070
$174.95 Reverse Driven Gear
Fits: 706, 756, 766, 786, 806, 826, 856, 886, 966,
986, 1066, 1086, 1206, 1256, 1456, 1466, 1468 &
1486, Replaces: 380288R1 & 138764C1
NOTE: 35 teeth. Improved design - heavier
& wider like old-style gear.
Transmission drive & secondary sun gear shaft
Fits: Super MTA, 400, 450 & 560
Replaces: 361288R4
Close out
Description
Order # Price
Transmission Drive................................................ IHS042................ $245.00
& Secondary Sun Gear Shaft w/ Belt Pulley Drive Gear
NOTE: 20, 28 & 39 teeth.
Miscellaneous transmission parts
Order #
Price
IHS1282
$4.15
IHS039
$20.00
IHS896
$46.75
Park Lock Assembly
Fits: 706 thru 1568
Replaces: 382847R1, 384261R1, 384263R1,
390856R1, 390857R1 390858R1, 64578C91
IHS838
$19.95
Transmission Shift Pattern Plate
Fits: 340, 460, 504, 560, 606, 660, 2504, 2606
(All w/ Torque Amplifier)
Replaces: 371371R1 (1-5/8" L x 1-1/16" H)
USA made
1st & Reverse Sliding Gear
Fits: Cub, Cub Lo-Boy 154, 184
& 185, Replaces: 350867R1
NOTE: 13 teeth.
Fits: Super H
Replaces: 358023R1 & 358218R1
USA made
NOTE: 31 teeth.
$175.00
Order #
Clutch Pedal Pivot Pin
Fits the following Gear Drive & Hydros:
706 thru 1206, 756 thru 1456, Early 766
thru Early 1468 & Hydro 100
Replaces: 384047R1
(.625" & .248" O.D., 1.820" o/a length)
USA made
IHS013
IHS048
Transmission gears, seals cont...
Clutch Easy Pedal Adaptor
Fits: H, M, Supers, MTA, 300, 350, 400 & 450
NOTE: Installs between clutch rod and
release shaft.
Transmission gears, seals
Order #
Torque Amplifier Handle Button Plug
Fits: 544, 656, 664, 666, 686, 706, 756, 766, 806,
826, 856, 966, 1066, 1206, 1256, 1456, 1466,
1468, 1566, 1568 (All using a 1-3/16" plug)
Replaces: 432344
(1.225 tang diameter)
Range Cover Shift Cam Detent w/ Rivets
Fits: 706, 806, 1206, 4100, 4156, 4166
Replaces: 380306R51
NOTE: Rivet to existing cam shifter.
Miscellaneous transmission parts continue on next page
247
Gear shift parts cont...
Order #
Price
IHS242
$11.95
Gear Shift Knob
Hi-Low & Forward / Reverse for: Hydros, 70,
86, 100, 544, 656, 664, 666, 686, 826, 966, 1026,
1066 & 3488; T.A. & Gear shift for: Gear Drive
544, 656, 664, 666, 686... More apps online.
Replaces: 388180R2, 537110R1
IHS1200
$7.95
NEW! Gear Shift Pattern Insert (For IHS242)
(5 Speed Plus Reverse)
Fits the following gear drive tractors: 544, 656,
664, 666, 686, Replaces: 2752898R1
(1.600" dia) USA made
IHS1204
$7.95
IHS1208
$7.95
IHS1799
$14.95
IHS243
$7.15
IHS794
$14.95
IHS834
$34.95
IHS832
$8.50
Miscellaneous transmission parts cont...
Order #
IHS761
Price
$35.65
Shift Lever Quadrant Top Cover
Fits: 756, 766, 826, 856, 966, 1066, 1256, 1456,
1466, 1468 (Gear Drive tractors only)
Replaces: 398005R2
IHS769
$66.60
Shift Lever Quadrant Outer Cover
Fits: 756, 766, 826, 856, 966, 1066, 1256, 1456,
1466, 1468 (Gear Drive tractors only)
Replaces: 398006R1
IHS981
$26.50
Shift Lever Repair Pin Kit
Fits: H thru WD9; 300 thru 660
(Rowcrop & Utility)
Replaces: 40465DA, 40466DA, 357003R1;
256918R1 (large pin); 256919R1 (small pin);
(2 ea) 172529 (expansion plugs)
USA made
IHS856
$30.95
Belt Pulley Block Off Plate
Fits: H & Super H, I, O, W4 series,
F300, F350, F460
Replaces: 49618DA, Will work for 365129R1
USA made
IHS858
$28.40
Belt Pulley Block Off Plate
Fits: M & Supers, MTA, I, O, W6 series,
400, 450, 560, 660
Replaces: 49053DB, Will work for 365128R1
USA made
Gear shift parts
Order #
IHS824
Price
$64.95
NEW! Gear Shift Lever
Fits: Cub (NOT w/ Deluxe Seat)
Replaces: 356530R91
USA made
IHS266
248
$5.90
Gear Shift Knob
Fits: Cub & Lo-Boy, A, B, C, H, M, MTA &
Supers, I, O, T, W-4, 6, 9 series, 100, 130, 140,
200, 230, 240, 300, 330, 340, 350, 354, 400,
404, 424, 434, 444, 450, 454, 460, 484, 504, 560,
574, 584, 600, 606, 650, 660, 684, 685, 784,
884, B-250, B-275, B-414, 3414, 3616 & 3514;
Crawlers: T4 thru some TD18A also used as a
reverser knob. Cub Cadet mowers: 70 - 122
Replaces: 53717DA, 3121549R1
NEW! High/Low Insert (For IHS242)
Fits the following Hydros: 70, 86, 100, 544, 656,
666, 686, 826, 966, 1026, 1066
Replaces: 2753957R1
NEW! Forward/Reverse Insert (For IHS242)
Fits the following Hydros: 70, 86, 100, 544, 656,
666, 686, 826, 966, 1026, 1066
Replaces: 2753956R1
NEW! Torque Amplifier Knob Insert
(For IHS242)
Fits the following w/ T.A.: 544, 656, 664, 666,
686, Replaces: 2752916R1
(1.600" dia.) USA made
Rubber Gear Shift Knob
Forward / Reverse for: Various Hydros
Replaces: 397931R2
(7/16" hole, 2" long, 1-3/16" - 1-5/16" O.D.)
Rubber Gear Shift T.A. Knob
Fits: IH 756, 766, 826, 856, (886 up to SN:
16999), 966, (986 up to SN: 23999), 1066, (1086
up to SN: 47999), 1256, 1456, 1466, 1468, (1486
up to SN: 25999), 1566, 1568, (1586 up to SN:
20999), 3388 up to SN: 10384, (3588 up to SN:
12729), 4386 SN: 2501 & up, 4568 & 4586
Replaces: 397978R2
NOTE: Also used as torque amplifier knob.
Rubber Gear Shift Boot
Fits: I9, ID9, W9, WD9, WR9, WDR9, WR9S,
Supers, 600 & 650
Replaces: 61064D
Rubber Gear Shift Boot
Fits: 544, 656, 664, 666, 686, 2544 & 2656
(All w/ gear drive transmission)
Replaces: 388182R1
Steering wheels, parts
Just like original • All new material • Steel spokes
Order #
IHS683
IHS299
IHS328
IHS173
IHS422
Price
$52.50
$49.50
$49.50
$59.95
$49.50
Steering Wheel
Fits: Late F12 & F14 (Both 1938 to 1939);
Late O-12 & O-14, Late I-12 & I-14, Late
W-12 & W-14, Early A, AV, B & BN
(to mid 1940); Will also fit Late F20 & F30
(Both 1937); H & HV (1939 to mid 1940),
M, MD, MDV & MV if 16" diameter wheel
is desired, Replaces: 29118DC
(Made by French & Hecht 848-IH)
(16" diameter, 3/4" shaft, keyed
3 COVERED TO CENTER spokes)
Steering Wheel
Fits: Cub, A, (Early Super A up to
SN: 355669), AV, Super AV, B, BN & C
Replaces: 60069D
(15" diameter, keyed hub, 3/4" shaft,
3 spokes)
Steering Wheel
Fits: Late Super A SN: 356001 & up, C,
Super C, H, M & Supers, I, O, W-4, 6, 9
series (w/ 17-5/8" 3 bare spoke wheel);
100, 130, 200, 230, F300 & 400 w/out
power steering, Replaces: 60070D
(17-5/8" diameter, keyed hub, 3/4" shaft,
3 spokes)
Steering Wheel
Fits: 300 Utility
Replaces: 363227R91
(17-5/8" diameter, splined hub, 36 splines,
3/4" shaft, 3 spokes)
Steering Wheel
Fits: M & Supers, I, W9 series, 400, 450, 600
& 650 (All w/ 4-spoke)
Replaces: 557282R91
(20" diameter, keyed hub, 3/4" shaft,
4 spokes)
IHS685
$2.80
Steering Wheel Nut
(For IHS683, IHS299, IHS328, IHS173,
IHS422)
(3/4"-16 NF x .444" tall)
IHS419
$52.50
Steering Wheel
Fits: Late 140, 240, 300, 330, 340, 350, 400,
404, (424, 444 w/ manual steering), 450,
460, (504 w/ manual steering), 560, 660,
3414, 4100, 4156, 4166 & 4186 (All w/
splined hub); Also fits Montgomery Ward
tractors, Replaces: 366557R1
(18" diameter, splined hub, 36 splines,
7/8" shaft, 3 covered to center shiny
spokes) New & improved
Steering wheels, parts cont...
Order #
Price
ABC504
$4.95
IHS450
(Power)
$64.95
IHS451
(Manual)
$64.95
IHS781
$9.95
Steering Wheel Nut
(For IHS419)
Replaces: 367232R1 & 368576R1
(13/16"-20 UNEF)
Steering Wheel Cap
(For IHS419)
NOTE: Caps will also fit IHS542 Steering
Wheel, but only original to steering
wheel until '56' series.
Serviceable Steering Wheel Cap
(For IHS419)
DEC522
$6.95
IHS850
$124.95
Steering Wheel
Fits the following w/ tilt steering: 706, 756,
766, 806, 826, 856, 966, 1026, 1066, 1256,
1456, 1466, 1468, 1566, 1568 & Hydro 100
(16" diameter, 36 splines, 7/8" shaft)
Replaces: 400217R1
IHS927
$49.95
Cover
(For Tilt wheel steering)
NOTE: Black plastic. Not exact of
original.
ABC504
$4.95
IHS852
$84.95
Decal
(For IHS781)
Printed in USA
Steering Wheel Nut
Steering Wheel Cap
Replaces: 400220R1
Steering wheels, parts continue on next page
249
Order #
IHS522
Price
$64.95
Steering Wheel Cap (Power Steering)
Replaces: 378395R1
Order #
IHS852GK
Price
$8.95
Gasket only
(For IHS852)
Replaces: 402434R1
IHS926
IHS980
$14.95
IHS781
ABC504
250
$9.95
Steering Wheel Cap
Knob (For Tilt Steering Adjustment Lever)
Replaces: 400214R1
NOTE: Black rubber.
DEC522
$6.95
Decal
(For IHS781)
Printed in USA
$15.70
Tilt Steering Adjustment Lever
Replaces: 400214R2
USA made
IHS542
$61.95
$4.95
IHS682
Rubber Dust Cover
Replaces: 382587R1
Steering Wheel
Fits the following w/ regular or telescopic
steering: (424 & 444 w/ power steering),
454, 464, 484, 485, (504 w/ power steering),
544, 574, 584, 606, 656, 664, 666, 674, 684,
686, 706, 756, 766, 784, 786, 806, 826, 856,
884, 886, 966, 986, 1026, 1066, 1086, 1206,
1256, 1456, 1466, 1468, 1486, 1566, 1568,
1586, 2400, 2424, 2444, 2500, 3088, 3288,
3388, 3588, 3688, 3788 4166, 4186; Case /
IH 4210, 4230, 4240, 4366, 4386, 4568, 4586,
4786 , 5088, 5288, 5488, 6388, 6588, 6788,
7288, 7488; Case C50, C60, C70, C80, C90,
C100; Hydro 70, Hydro 84, Hydro 86,
Hydro 100, Hydro 186 & Hydro 3488
Combines: 205, 315, 403, 403 Hillside,
453, 503, 615, 715, 815, 915, 1400,1420, 1440,
1460, 1470 & 1480
Windrowers: 275 & 375
Cotton Pickers: 414, 416,
420, 422, 616, 622 & 782
Cotton Harvester: 95 & 1400
Replaces: 385156R1
(16" diameter, splined hub, 36 splines, 7/8"
shaft, 3 covered to center shiny spokes)
Steering Wheel Nut
Replaces: 367232R1 & 368576R1
(13/16"-20 UNEF)
$15.50
GTS002
$49.50
IHS685
$2.80
GTS001
$49.50
IHS863
$34.95
Steering Wheel
Fits: Cub Cadets: Original, 70, 71, 72, 73 &
100 (All w/ 7 HP & up to SN: 400000)
Replaces: 376176R1
(13" diameter, 40 spline, 11/16" hub dia.,
bare spokes)
Steering Wheel Nut
(For GTS002)
(3/4"-16 NF x .444" tall)
Steering Wheel
Fits: Cub Cadets: 100, 102, 122 & 123
Replaces: 385734R1
(13" diameter, 40 splines, 11/16" hub
diameter,
3 COVERED TO CENTER spokes)
Serviceable Steering Wheel Cap
(For GTS001)
IHS685
$2.80
Steering Wheel Nut
(For GTS001)
(3/4"-16 NF x .444" tall)
Order #
IHS860
IHS863
ABC502
Price
$59.95
$34.95
$2.50
Serviceable Steering Wheel
Fits: Cub LoBoy 154, Cub LoBoy 184, Cub
LoBoy 185, (Cub Cadet 982 SN: 665001 &
up), Cub Cadet 1872, Cub Cadet 2072
Serviceable for wheels w/ 2-1/2" center
cap opening, Replaces: 404601R1
(15" diameter, COVERED TO CENTER
spokes)
Steering Wheel Cap
Replaces: 393157R2 & 533742R1
(2.511" O.D.)
Steering wheel parts cont...
Order #
IHS983
Price
$9.25
Underside
View
MIS103
Steering Wheel Nut
Fits: 300, 400, W400, 600, 650
(All w/ original power steering plate)
Replaces: 366285R1
(13/16"-20 UNEF) USA made
NOTE: Zinc plated.
$10.75
Steering Wheel Spinner
(Aluminum)
Steering Wheel Nut
Replaces: 124944
(5/8"-18 NF)
Steering parts
Order #
Steering wheel parts
Order #
JDS519
JDS564
Price
$14.95
Steering Wheel Acorn Nut
Serviceable for Cub thru 650 (All w/
exposed nut); Correct for: 300U & W400
(Both w/ manual steering)
Replaces: 364360R1
(3/4"-16 NF x .859" tall)
$13.45
Power Steering Plate
Serviceable for H thru 650
(All w/ exposed nut)
IHS685
ABC504
$2.80
$4.95
Steering Wheel Nut
Fits: Cub, Cub Lo-Boy, A, B, C, H, M, MD
& Supers, I, O, W4 thru W9 series &
Supers, 100, 130, 200, 230, F300, F350, F400
& F450 Lawn & Garden: 70, 71, 72, 73,
100, 102, 104, 106, 122, 124 & 126 (All up to
SN: 400000); 800, 1000, 1200 & 582 (All SN:
400001 & up)
Replaces: 114499, 219753 & 122403
(3/4"-16 NF x .444" tall)
Steering Wheel Nut
Fits: 140, 240, (F300 & I300 w/ power
steering), 330, 340, (F350 & I350 w/power
steering), 400, 404, 504, B414, 424, 444,
450, 460, 504, 560, 660, 3414, 4100, 4156,
4166, 4186 (All w/ splined hub); Also fits
Montgomery Ward tractors
Replaces: 367232R1, 368576R1
(13/16"-20 UNEF)
Price
IHS844
$28.95
IHS964
$34.90
IHS148
$12.50
ABC1501
$9.95
ABC1514
$8.95
IHS1526
$15.40
Steering Shaft Support Knuckle
Replaces: 350902R3
Steering Shaft Support Knuckle
Fits: A, Super A, B, 100, 130 & 140
Replaces: 9442DAX
Steering Arm Knuckle Set Screw
Replaces: 43528D
(1/2"-13 NC) USA made
NEW! Lower Steering Wheel Worm Shaft
Seal fits: Cub, Cub LoBoy
Replaces: 350891R91, 358836R91
NOTE: Seal for splined shaft that center
tie rod arm mounts on.
NEW! Steering Wheel Worm Shaft Oil Seal
Fits: Cub, Cub LoBoy
Replaces: 350892R91, 385703R92
NOTE: Will not fit 154, 184, 185.
NEW! Steering Gear Housing Gasket Set
Fits: Cub, Cub LoBoy
NOTE: Includes (1) steering worm shaft
gasket, (1) steering gear housing base
gasket.
Steering parts continue on next page
251
Steering parts cont...
Order #
Price
IHS1532
$12.95
Fits: A, Super A, 100, 130, 140
Replaces: 48956D, 358229R91
Steering parts cont...
Order #
IHS133
IHS1764
IHS606
IHS1774
IHS607
IHS605
Price
$12.00
$124.95
$84.95
$84.95
$10.50
$174.95
IHS1778
$174.95
IHS1800
$74.95
ABC1628
252
$14.95
Steering Arm Knuckle Set Screw w/ Nut
Fits: A, C & Supers w/ wide front
Replaces: 43466DB USA made
NEW! Steering Sector Shaft
Fits: A, AV & Supers; IA, ISA
Replaces: 47683DB USA made
NOTE: 4140 steel. Square end for steering
arm.
Steering Sector Shaft
Fits: Some A, Super A, 100, 130
(3/16" keyway at gear end, 1/4" keyway at
tapered end) NOTE: 4140 steel. Threaded
end drilled for cotter key.
NEW! Steering Sector Shaft
Fits: 140
Replaces: 70890C1 USA made
(1/4" wide keyways) NOTE: 4140 steel.
Nut
Replaces: 359040R1
Steering Sector Gear
Replaces: 351815R1
(9 full Teeth - 3/16" keyway)
NOTE: Threaded end drilled for cotter
key.
ABC1630
$7.95
IHS018
$324.95
IHS188GK
$9.85
NEW! Lower Steering Shaft Oil Seal
Fits: A, Super A, 100, 130, 140
Replaces: 47703D, 358775R91, 358815R91,
382230R91
Lower Radiator Housing
Replaces: 350886R11
Mounting Gasket
(For Cub Radiator)
IHS746
$93.30
IHS750
$153.25
Steering Sector Gear
Fits: H & Supers, F300 & F350
Replaces: 50038DB
NOTE: Full Circle Style - 32 teeth.
Steering Worm Shaft
Fits: H & Supers, F300 & F350
Replaces: 50047DB
ABC166
$90.75
ABC1565
$13.25
IHS682
$15.50
NEW! Steering Sector Gear
Fits: 140
Replaces: 70888C1
(9 full teeth, 1/4" wide keyway)
NEW! 7-piece Steering Sector Bushing,
Bearing & Seal Kit
Fits: A, Super A, 100, 130, 140 Series
Replaces: 41096DBR, 47675D, 47676DR,
47703D, 48956D, 85652H, 261733,
1981225C1, 2099680, 358775R91, 358782R91,
358812R91, 358815R91, 382229R91,
382230R91, ST287, ST288
Fits: B, BN, C, H, M, MD & Supers, MTA,
200, 230, 240, F300, F340, F350, 400, 450
Replaces: 43800D,DA, 359042R91,
359257R91, 364468R91, 488561R91
Steering Universal Joint w/ Yoke, PIns &
Grease Fitting
Fits: H, M, MTA & Supers, F300, F350, 400
& 450 (7/8" diameter shaft on both ends)
NOTE: To fit the above models the yoke
must be cut from existing shaft & shaft
drilled.
NEW! Lower Steering Shaft Oil Seal
Fits: 200, 230, 240, F340, (F404, F504 when
used w/ 350009R12 cover)
Replaces: 360457R91
(2.750" I.D., 3.756" O.D., .438" wide)
Rubber Dust Cover / Umbrella
Fits: 544, 656, 666, 686, 706, 756, 766, 786,
806, 826, 856, 886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468, 1486, 1566,
1568, 1586, 4156, 4166 & 4186; Hydros: 70,
86 & 100, Replaces: 382587R1
NOTE: Fits under steering wheel & covers
the orbit motor.
Power steering parts
Order #
Price
ABC1233
$299.85
Belt Driven Power Steering Pump
(For tractors using Eaton style pump)
Fits: IH models
Replaces: 363185R91; Eaton P761, 20928, 5031003 & 503-1005-00 NOTE: Can be adapted
to tractors using Char-Lynn power steering
w/ Eaton pump. Does not include brackets,
reservoir or pulley.
ABC1417
ABC1414
$37.45
$48.75
ABC1419
$9.95
IHS1418
$74.95
IHS1420
$80.30
IHS338
Power Steering Pump Port Block
(For tractors using Eaton style pump
w/ separate reservoir)
Fits: IH models, Replaces: Eaton 20925 &
AG33547A USA made
Bolt (For ABC1414)
Replaces: Eaton 14126
(Yellow zinc; Grade 8)
$599.60
Crankshaft Drive Pulley
(For Power Steering)
Fits: M, Super M, MTA, 400, 450, W6 thru
W450 gas, LP
Replaces Char-Lynn 5515
Power Steering Reservoir Cap
Fits: M, MTA & Supers gas, diesel
Replaces: 204827
Char-Lynn Power Steering Torque Generator
w/out port block
(7/8" shaft)
IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating
Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM;
Recommended Fluid Input - 3 to 4 GPM
IHS673
Power steering parts cont...
Order #
ABC380
(Original)
Price
$140.30
Char-Lynn Power Steering Slip Fit Coupler
(For IHS555 Generator)
ABC380: (3-3/8" to 3-1/2" adjustable length)
ABC497: (2-5/8" o/a length)
ABC497
$18.25
IHS675
$65.80
Char-Lynn Power Steering Mounting
Bracket
Fits: M & Supers
USA made
IHS740
$223.35
Power Steering Priority Flow Control Valve
Fits: IH / Farmall models w/ LIVE
hydraulics (1/2" NPT inlet, 3/8" NPT return,
1/2" NPT to remote cyls.) USA made
(Economy)
NOTE: Eliminates belt driven pump, pulleys
& brackets. Enables you to use your hydraulic
pump to operate the power steering. Is
preset at 1500 PSI & 8 gpm. Adjust to your
application.
Belt Driven Power Steering Pump Bracket
(For tractors using Eaton style pump)
Fits: M & Supers, MTA, 400, 450, W6 thru
W450, Replaces: Eaton 20969 USA made
NOTE: Bolts to LH side of engine above
the governor.
$8.50
Underside View
IHS555
Power Steering Pump Pulley
(For ABC1233)
(5" O.D., 0.675" bore, 1/8" keyway,
0.9715" total width for 1/2" belt)
Tie rods
Order #
IHS814
Price
$56.65
IHS817
$26.85
(Inner
threaded)
IHS819
(Outer
Notched)
$69.95
Port Block only
(For IHS555 Generator)
USA made
$49.30
Tie Rod End Assembly
Fits: A & AV; Super A & Super AV
(Both w/ SN: up to - 318309); C & Super C
Replaces: 43468D, 48280DB, 57875D
Tie Rod End
Fits the following w/ automotive type tie
rod ends: Late Super A & AV SN: 318310 &
up, C, Super C, 100, 130, 200, 230, 385, 424,
Some 454, 464, 484 w/ swept back axle w/
44 - 72" Axle or 48 - 80" Axle, some 485, 495,
some 574, 585, 595, 674, 695 w/ swept back
axle, 784, 884, 885 & 2424 (1/2" diameter
thread; Stud taper - .560" to .630"
IHS819 Replaces: 65077C91 & 360412R11
IHS817: (11/16" threaded R/H, 18 thread,
3.062" from threaded end to grease zerk.
Check dimensions before ordering.)
IHS819: (.750" diameter rod, 16" from end
to grease zerk, 1/2" dia. threaded stud taper
= .560 to .630. Check dimensions before
ordering.)
Tie rods continue on next page
253
Tie rod boots
Universal Tie Rod Boot
(Base x Height x Hole I.D.)
Specify size when ordering
Tie rods cont...
Order #
JDS736
IHS894
Price
$3.95
$107.10
Tie Rod Boot
Replaces: 358209R1
(1.500" base, .735" tall, .550" base)
NOTE: Check measurement prior to
ordering.
Tie Rod Assembly
Fits the following Farmall w/ IH factory
wide fronts Rowcrop models w/ tie rods
behind center axle: Late H, M, MTA &
Supers, F300, F350, 400, 450, 460, 544, 560,
656, 666, 686, 706, 756, 766, 786, 806, 826, 856,
886, 966, 986, 1026, 1066, 1086, 1206, 1256,
1456, 1466, 1468, 1486, 1566, 1568 & 1586
Hydros: 70, 84, 86, 100 & 186
Replaces: 358979R91, 359569R91, 359986R1 &
383917R1 (762" at widest point of shaft)
NOTE: Check measurement prior to
ordering.
IHS110
$21.75
(Inner
threaded)
IHS111
(Outer)
$34.95
ABC368
$2.95
FDS336
JDS736
ABC368
ABC371
ABC369
FDS337
ABC370
Order #
Price
FDS336
$3.50
(1.200" base, .475" tall, .500" hole)
Dimension
JDS736
$3.95
(1.500" base, .735" tall, .550" base)
ABC371
$3.25
(1.300" base, .965" tall, .500" hole)
FDS337
$3.50
(1.450" base, .600" tall, .650" base)
ABC368
$2.95
(1.675" base, .900" tall, .625" hole)
ABC369
$2.95
(1.575" base, .600" tall, .650" hole)
ABC370
$3.50
Fits: Same as IHS110 & IHS111 Tie Rod Ends
(1.800" base, .765" tall, .740" hole)
Front axle parts
Order #
Tie Rod End
IHS110: (1" threaded R/H, 16 thread, 3.750"
from threaded end to grease zerk, .762" at
taper.)
IHS111: (15-3/4" long, .920" dia., 6 notches,
.762" at taper.)
IHS296
Price
$26.45
Wide Front Axle Molded Rubber Bumper
Fits: Farmall C, Super C, 200 & 230
IHS715
$426.65
Wide Front Axle Wishbone
Fits: Late H, M, MTA & Supers, F300,
F350, 400, 450, 460, 544, 560, 656, 706,
756, 806, 826, 856, 1026, 1206 & 1256
(All Rowcrops & Hydro 70 w/ IH factory
wide front & tie rods behind center tube)
IHS056
$254.50
Wide Front Center Tube w/ Factory
Bushings fits: Same as IHS715
Replaces: 358976R31 & 383926R21 (tube);
48841D (bushing)
(4-1/2" O.D. tube, 3.90" I.D. tube, 42-1/2"
o/a length)
IHS457
$330.00
Tie Rod End
Front Pivot Bolster Bracket
Fits: 240, 404, 424, 444, 2404, 2424 & 2444
Replaces Casting 369008R1
254
Front axle parts cont...
Order #
IHS457PIN
IHS055
IHS097
Price
$45.00
$260.00
$27.00
Bolster Pivot Pin
Replaces: 368604R11
(4-9/16" long, 1-3/16" dia.)
NOTE: Also fits 330 & 340.
Lower Front Pivot Bolster
Fits the following w/ tie rods in the rear:
M, MD, Super M, MTA, 400, 450, 544, 560,
656, 666, 686, 706, 756, 806, 826, 856, 1206,
1256, Hydro 70 w/ Factory IH wide front
Replaces: 383909R4
Wide Front Bolster Pivot Pin
Fits: H, Super H, M, MD, Super M, MTA,
Farmall 300, Farmall 350, 400, 450, 460, 544,
560, 656, 666, 686, 706, 756, 806, 826, 856,
1206, 1256 & Hydro 70 w/ Factory IH wide
front, Replaces: 358978R2 & 379941R1 (11/4" dia., 8-1/2" long)
Seats, parts cont...
Fits: A, B & Supers, 100, 130 & 140;
Also fits IH 300, 350 & 460 Utilities
w/ Low-Style seat
IHS031A Replaces: 50587DB
IHS031B Replaces: 50586DB
Description
Order # Price
RH Flat Leaf Seat Spring...................................... IHS031A............. $30.00
LH Flat Leaf Seat Spring....................................... IHS031B............. $30.00
IHS938
IHS936
Description
Fits: A, B & Supers, 100, 130 & 140
USA made
Order # Price
RH Seat Support Bracket (Powder coat)............ IHS938................ $67.95
LH Seat Support Bracket (Powder coat)............ IHS936................ $67.95
Seats, parts
Fits: C & Super C w/out remote or fasthitch
Replaces: 352086R91
USA made
Description
Order # Price
Toolbox & Seat Support........................................ IHS933................ $139.95
NOTE: Red powder coat.
Following models with remote or fast hitch:
C, Super C, 200, 230
Replaces: 356826R92, 359572R92, 360710R93
USA made
Description
Order # Price
Toolbox & Seat Support........................................ IHS1502.............. $138.95
IHS196A
IHS196
Description
Upholstered Flip-Back Seat
w/ Seat Lock Rod
Fits: A, B & Super A, 100, 130 &
Early 140; Will also fit IH 300,
350 & 460 Utilities w/ low-style seat
Replaces: 50570DC & 354157R92
USA made
Order # Price
Red / White Seat Pan............................................. IHS196A............. $176.40
NOTE: Upholstered in a vinyl cover.
Silver Seat Pan........................................................ IHS196................ $203.90
NOTE: Upholstered in a nylon basket weave cover for original look. Improved color.
Fits: H & HV (Both up to SN: 15697);
M, MV, MD, MDV All up to SN: 9286; I4, W4,
O4, OS4, Super W4, I6, ID6, I9, ID9, W6, IHS202
WD6, O6, OS6, (Super W6TA up to SN: 9084),
W9, WD9, WDR9, WR9S, Super WD9
Bottom View
(2-1/4" O.D., 4-3/4" tall)
IHS728
IHS1700
Description
Order # Price
Silver Flip-Back Seat USA made......................... IHS202................ $179.95
NOTE: Upholstered in a nylon basket weave cover for original look. Improved color.
Seat Spring Coil...................................................... IHS728................ $39.95
NEW! Seat Pivot Bracket Pin USA made........... IHS1700.............. $14.95
Description
Fits: H, HV (both up to SN: 15697);
M, MV, MD, MDV (All up to SN: 9286)
Replaces: 51287DX, 51288DX, 51290DX,
51364D, 52436D
USA made
Order # Price
NEW! Seat Support Assembly............................. IHS1490.............. $228.95
NOTE: Seat pedestal w/ pivot bearing, tool box, seat leg w/ handle, seat support w/ reinforcement, seat support bracket & 2 stops. Does not include hardware or springs.
255
IHS029A
IHS029B
IHS029C
Description
Deluxe Upholstered Seat Pan
(Attaches w/ 4 bolts)
Fits: Cub, Cub Lo-Boy, C, H, M & Supers, MTA, 200, 230, F240, F300, F340, F350, F400,
F450, F460, 600 & 650; Late F20 & F30 w/ Monroe Easy Ride seat
Replaces: 351880R92, 351925R93 & 357518R91
USA made
IHS613
IHS614
Order # Bottom View
Fits: C thru W450; The following
w/ standard seat: F460, F560 & 660
Replaces: 352101R1 & 358268R2
(1/2" x 20 N.F., 1-3/4" o/a length)
USA made
Description
Order # Price
Seat Mounting Plate Shoulder Bolt.................... IHS944................ $7.50
NOTE: Used to bolt seat base to battery box or toolbox. 4 used per
Fits: C, H, M & Supers, MTA, 200, 230, 300,
350, 400, 450, 460, 560, 600, 650 & 660;
Also fits: Late F20, F30, B, BN w/ Monroe®
Easy Ride seat
Replaces: 354670R2
Description
Price
Order # Price
Seat Spring Coil..................................................... IHS030................ $26.95
Red / White Seat Pan............................................. IHS029A............. $123.20
NOTE: Upholstered in a vinyl cover.
Silver Seat Pan....................................................... IHS029B............. $135.60
Black Seat Pan........................................................ IHS029C............. $127.65
NOTE: Upholstered in a nylon basket weave cover for original look.
Red / White Seat Pan............................................. IHS613................ $139.65
w/ Brass Ring Drain Hole
Silver Seat Pan....................................................... IHS614................ $163.75
w/ Brass Ring Drain Hole
(For 4 bolt seat pans)
Fits: Cub, Cub Lo-Boy, C, H, M & Supers,
MTA, 200, 230, F240, F300, F340, F350,
F400, F450, F460, 600, 650; Also fits late
F20 & F30 when equipped with Monroe
Easy Ride Seat
Replaces: 103322, 181393, 114-308 (bolt),
81547 (lock washer)
(7/16" NF x 3/4" long)
Description
Order # Fits the following w/ hydraulic flip back seat:
C, H, M, MD & Supers, MTA, Late Super W6
series, 200, 230, F300, F350, 400, W400, 450, W450, 460, 560, 600, 650 & 660 w/ standard seat, Replaces: 356892R2 (pin); 356893R2
(clip); 228280 (washer)
(3/8" O.D. x 7" length)
USA made
Description
Order # IHS1309
IHS1252
Description
Fits: C, Super C, Super H, Super M, Super
MD, MTA, 200, 230, F300, F350, F400, F450,
W400, W450, F460, 560, 600, 650 & 660
IHS1252 Replaces: 351128R1 & 352122R1
IHS1309: (1.325" x .660" diameter)
IHS1249: (2.260" o/a length,
1.500" O.D. big end, .499" O.D. pin)
Order # Price
Seat Locator Spring USA made........................... IHS1309.............. $5.95
Seat Locator Pin USA made................................. IHS1249.............. $14.20
NOTE: Zinc.
'C' Clip Retainer USA made................................ IHS1252.............. $4.95
NOTE: 1 used per tractor.
Price
Seat Pan Bolt Kit..................................................... IHS1190.............. $4.95
IHS1249
(Both w/ Deluxe Seat Assembly)
Replaces: 364399R91
(Bracket = 16-1/2" c.c.,
19-1/2" long x 14-1/2" wide)
USA made
Description
Order # Price
Deluxe Seat Frame only........................................ IHS879................ $249.95
NOTE: Powder coat red. Will fit IHS580, IHS578, IHS861, JDS272L,
JDS270 & JDS274 cushions. Mounting brackets NOT available from
Steiner Tractor Parts.
Price
Hydraulic Flip Seat Rear Hinge Pin................... IHS977................ $10.75
Clips & Spacers
256
Fits: Cub, Cub Lo-Boy, 100, 130,
140, 300 Utility, 330 & 350 Utility
(All w/ deluxe seat assembly)
JDS272L & IHS580 Replaces: 363219R91
JDS270 & IHS578 Replaces: 363220R91
JDS274 & IHS861 Replaces: 363740R91
JDS272L
JDS270
Fits: 460, 560 & 660 w/ Standard seat
Replaces: 372759R92
Like original USA made
Description
IHS578
IHS580
JDS274
Description
Order # IHS861
Order # Price
Seat Cushion Assembly........................................ IHS670................ $289.50
NOTE: Upholstered in red & white vinyl. Back rest & bottom cushions
have steel cores.
Price
Back Rest Seat Cushion......................................... JDS272L............. $45.95
NOTE: Upholstered in black vinyl w/ brass rivets, steel backed.
Bottom Seat Cushion............................................. JDS270................ $60.95
NOTE: Upholstered in black vinyl w/ wood bottom w/ original style
springs.
IHS667
$292.35 Deluxe Seat Cushion Assembly w/ Metal
Frame fits: Farmall 460, 560 & 660
(All w/ Deluxe seats not Standard)
Replaces: 372752R94
• Upholstered in a black & white vinyl
w/ embossed pleating.
• Back Rest Cushion has steel core.
• Bottom Cushion has steel core.
• Metal Frame is painted red.
USA made • Like original
Arm Rest Seat Cushion......................................... JDS274................ $34.95
NOTE: Upholstered in black vinyl, steel backed.
Back Rest Seat Cushion......................................... IHS580................ $52.75
NOTE: Upholstered in silver nylon basket weave w/ brass rivets,
steel backed.
Bottom Seat Cushion............................................. IHS578................ $63.95
NOTE: Upholstered in silver nylon basket weave w/ wood bottom
w/ original style springs.
Arm Rest Seat Cushion......................................... IHS861................ $34.95
NOTE: Upholstered in silver nylon basket weave, steel backed.
IHS668
IHS669
IHS667 components
The following are components (Sold separately) of IHS667
IHS664
$312.50 Deluxe Seat Cushion Assembly
w/ Metal Frame
Fits: 200, 230, 240, 330, 340 & IH 460
Replaces: 371625R1, 371626R1 & 371627R91
• Upholstered in a black & white vinyl
w/ embossed pleating.
• Back rest cushion has steel core.
• Bottom cushion has wood core.
• Metal frame is painted red.
USA made •Like original
Deluxe Seat Cushion Assembly:
Order #
Price
IHS668
$79.50
IHS669
$152.60 Bottom Cushion
$303.90
IHS534
$144.90
(Economy)
Deluxe Seat Cushion Assembly:
Price
IHS665
$82.05
IHS666
$146.55 Bottom Cushion
Replaces: 379384R92
IHS666
IHS664 components
Order #
Back Rest Cushion
Replaces: 372755R93
IHS881
(Restoration
Quality)
IHS665
Description
Description
Back Rest Cushion
Seat Cushion Set
Fits: Some Hydro 70, 86, 100, 504 Deluxe,
544 Row Crop, 574, 606, (656 up to
SN: 14500), 666, 686, 706, 756, 766, 786,
(806 up to SN: 14500), 826, 856, 966, 1026,
1066, 1206, 1256, 1456, 1466, 1468, 1566,
1568, 2504 Deluxe, 2706 Deluxe, 2756
Deluxe, 4100, 4156, 4166, (4186 SN: 19259
& up) (All w/ mechanical seat suspension)
Replaces: 387174R92, 387177R92, 400711R2
IHS881: USA made
IHS534: Upholstered in a black & white
vinyl. Back rest cushion is steel backed,
Set includes: Bottom seat cushion, lower
wrap around backrest & upper back rest.
Seats, parts continue on next page
257
Order #
Price
IHS671
$75.00
IHS660
Seat Cushion Support Plate Kit
Fits: Some Hydro 70, 86 & 100, 504 Deluxe,
544 Row Crop, 574, 606, 656 prior to
SN: 14500, 666, 686, 706, 756, 766, 786,
806 up to SN: 14500, 826, 856, 966, 1026,
1066, 1206, 1256, 1456, 1466, 1468, 1566,
1568, 2504 Deluxe, 2706 Deluxe, 2756 Deluxe,
4100, 4156, 4166, (4186 SN: 19259 & up)
(Kit includes: IHS660, IHS661 & IHS662
support plates, nuts, bolts, locks &
instructions) USA made
IHS661
IHS662
IHS663
IHS883
IHS885
Fits: 756 thru 1568 series & Hydro 100;
Serviceable for 706 thru 1206
Replaces: 400688R2, 400689R3, 400690R2,
400692R2, 400693R1, 400694R1 & 400698R1
• Upholstered in black or white vinyl
• 4" foam seat cushion
• 2" foam back rest cushion
• Has "IH" indentation in metal back rest cover
Restoration quality
Description
Order # Price
Black Seat Assembly w/ Arm Rests.................... IHS883................ $425.55
White Seat Assembly w/ Arm Rests................... IHS885................ $429.15
NOTE: Drilled for 06, 26, 56 & 66 series mechanical or hydraulic seat.
Must reuse (2) original front & rear horizontal mounting brackets from
your original seat to mount.
IHS931
Fits: 756, 766, 826, 856, 966, 1026, 1066, 1256,
1456, 1466, 1468, 1566, 1568, Hydro 100
IHS671 components
IHS1655
Seat Cushion Support Plate Kit:
Order #
Price
IHS660
$29.25
Back Plate, Replaces: 387178R1
IHS661
$23.50
LH Side Plate, Replaces: 387172R1
IHS662
$23.50
RH Side Plate, Replaces: 387173R1
IHS663
$6.45
Seat Hardware Kit
IHS343
IHS648
JDS533
Description
Description
Order # Price
Front Seat Support Cover......................................... IHS931................ $40.95
Description
NEW! Rear Seat Support Cover............................. IHS1655.............. $40.85
Description
Fits: 504, 544, (F560 SN: 59010 & up),
I560 SN: 5521 & up, 656, (I660 SN: 6873
& up), 666, 686, 706, 756, 766, 806, 826,
856, 966, 1026, 1066, 1206, 1256 1456,
1466, 1468, 1566, 1568, 4100, 4156, 4166,
4186 & Hydro 100
(All w/ Mechanical Suspension)
Replaces: 382648R1 & 380712R1
Order # Price
Universal Full Suspension Seat........................... ABC445.............. $139.30
w/ back rest & 5-angle base w/ slide track & mounting brackets
NOTE: Can be adapted to fit many tractors & lawn mowers.
Tractor Seat Pad (Big Bucket)
w/ (2) Drain Hole
Fits: 19" - 21" Pan (side to side),
IH & Farmall large seat pans & others
(Drawstring type)
MIS006B
IHS1843
Order # Price
Rubber Seat Spring................................................ IHS343................ $49.95
NOTE: Does not come w/ bushings. You must reuse or purchase
IHS648 bushing repair kit.
Seat Bushing Repair Kit....................................... IHS648................ $26.45
MIS006S
Description
MIS006BK
Order # Price
Red / White Seat Pad.............................................. MIS006B............ $20.20
Seat Adjustment Handle...................................... JDS533................ $27.50
Silver Seat Pad........................................................ MIS006S............. $28.50
NEW! Rubber Seat Bumper................................. IHS1843.............. $12.50
Black Seat Pad......................................................... MIS006BK......... $18.45
258
Seat shock absorbers, bushings
Order #
IHS329
Price
$32.50
MHS044
$39.95
IHS347
$39.95
IHS465
ABC526
$39.95
$9.65
Seat Shock Absorber
Fits: Late F20 & Late F30 w/ Monroe®
Easy Ride seat; H, HV, M, MD & MV
w/ Rear mounted shock absorber
Replaces: 352587R92
(Center-to-center compressed = 11-1/2",
fully extended = 18-1/8")
Seat Shock Absorber
Fits: B & BN when equipped w/ optional
Monroe® Easy Ride seat, C, H, M, MTA &
Supers, 200, 230, F300, F350, 400, 450, F460 &
F560 w/ standard seat; Super W6 & SW6TA
both SN: 10001 & up; 600, 650 & 660 (All w/
standard seat)
MHS044: (Center-to-center compressed =
6-1/4", fully extended = 8-1/4")
IHS347: (Center-to-center compressed =
7-1/4", fully extended = 9-1/8")
NOTE: Horizontal bolt hole at each end.
Seat Shock Absorber
Fits: H, M, MTA & Supers w/ Mid-mounted
shock absorber, Replaces: 353204R93
(Overall compressed = 9-1/8",
fully extended = 11")
NOTE: Horizontal bolt at one end & stud at
other end.
Seat Shock Bolt
Fits: IHS329, IHS347, MHS044, IHS465 Shock
Absorbers, W400, W450, 600 & 650
Replaces: 351751R1
(7/16" NC thread, .625" shoulder,
2.380" o/a length) USA made
IHS646
$48.95
Seat Shock Absorber w/ Hardware
Fits: Some 460, 504, 544, 560, 656, 660, 666,
686, 706, 756, 766, 806, 826, 856, 966, Hydro
70, 86 & 100, 1026, 1066, 1206, 1256, 1456,
1466, 1468, 1566, 1568,4100, 4156, 4166 &
4186 (All w/ Deluxe seats)
Replaces: 372751R91
(7.815" o/a closed length, 3/8" NF thread,
10.420" o/a extended length)
IHS325
$1.75
EACH
Rubber Seat or Shock Bushing
(For Horizontal Bolt Hole)
Fits: Late F20 & Late F30 w/ Monroe® Easy
Ride seat; C, H, M, MTA & Supers, 200, 230,
F-300, F-350, 400, 450, 460, 560, 600, 650 &
660, Replaces: 72696R1, 250416R1
NOTE: 2 used per horizontal bolt;
Sold individually.
Seat shock absorbers, bushings cont...
Order #
IHS533
IHS1120
IHS1122
Price
$1.50
EACH
Rubber Seat Shock Bushing (For Stud)
Fits: H, M, MTA & Supers
Replaces: 353205R1
NOTE: 2 used per shock stud;
Sold individually.
Fits: 504, 544, 656, 666, 686, 706, 756, 766,
806, 826, 856, 966, 1026, 1066, 1206, 1256,
1456, 1466, 1468, 1566, 1568, 4100, 4156,
4166, 4186; Hydros: 70, 86 & 100
(All w/ Suspension seat)
(6" long, 3/4" diameter)
(5-3/4" long, 3/4" diameter)
USA made
Description
Order # Price
Lower Shaft w/ Roll Pin at End................................ IHS1120............. $22.90
NOTE: Steel.
Upper Shaft w/ Pin in Center....................................IHS1122.............. $13.10
NOTE: Steel.
Fits the following w/ MHS044
or IHS347 style shock: C SN: 36426 & up,
H, M, MD & Supers, MTA, Late Super W6
series, 200, 230, F300, F350, 400, 450, W400
& W450; Fits the following w/ standard seat:
460, 560, 600, 650 & 660
Replaces: 361033R91; 181413 (bolt);
(2) 354731R1 (spacers); 354730R1 (tube);
354732R1 (nut)
(7/16" NF x 3-7/16" length bolt,
(2) 5/8" thick spacers, 2-3/16" length tube)
USA made
Description
Order # Price
Upper Shock Bolt Spacers & Tube Assembly....IHS979................$31.40
Description
Seat bearing
Fits: IH / Farmall models, F20, F30, H & M
w/ Knoedler aftermarket seats
Order # Price
Seat Bearing............................................................. ABC537.............. $14.30
Seats, parts continue on next page
259
Fenders, parts cont...
Seat pivot support rods
Order #
Price
MHS046 $23.25
IHS584
IHS585
IHS325
$20.95
$24.50
$1.75
EACH
Order #
Price
IHS576L
(LH)
$149.50
4" Seat Pivot Support Rod
Fits: Late F20 & Late F30
w/ Monroe® Easy Ride seat
USA made
IHS576R $149.50
(RH)
3-1/2" Seat Pivot Support Rod
Fits: C, H, M, MTA & Supers, (Super W6 SN:
10001 & up), W6TA series, 200, 230, F-300,
F-350, 400, 450, 600, 650 & some 460, 560 &
660, Replaces: 355753R1
NOTE: Includes: (2) flat washers, (2) rubber
bushings & (2) #5 bolts. Exact of original.
6" Seat Pivot Support Rod
Fits: H, M & Supers
Replaces: 352648R1
NOTE: Includes: (2) flat washers, (2) rubber
bushings & (2) #5 bolts.
Exact of original.
Rubber Bushing only
(For MHS046, IHS584 & IHS585 Support
Rods), Replaces: 72696R1, 250416R1
IHS357
$155.00
IHS358
$155.00
IHS359
$11.95
IHS356
$129.00
Fender
Replaces: 350961R12
NOTE: LH & RH are the same;
Sold individually.
IHS364
$49.95
Fender
Fits: A, AV, B & BN
Replaces: 51179DX
Sold individually.
IHS364B
$2.00
Fenders, parts
Same gauge, weight & material as original.
For best results fit fenders to tractor before paintiing.
Order #
IHS573
IHS363
260
Price
$114.90
$115.00
Fender
Fits: Super A, Super AV, 100, 130 & 140
Replaces: 350608R1 & 350609R1
Fender
Fits: Farmall C
Replaces: 351248R91
Sold individually.
Fender
Fits: Super C, 200 & 230
Replaces: 351248R92
Sold individually.
Bolt (U-Shaped) w/ Hex Nuts & Washer
Fits: C, Super C, 100, 200, 230, 240, 404;
Will fit IHS357 & IHS358 Fenders
Replaces: 351250R1
NOTE: 1 needed per fender;
Sold individually.
Fender only
Fits: 300, 350, 400, 450; Serviceable for 340,
460, 504, 560 Replaces: 51500DB
Sold individually.
Fender Extension Kit (For IHS356)
USA made
NOTE: Includes: (2) mounting plates, (8)
bushings, (8) long bolts, (8) short bolts, (16)
washers & (8) nuts.
Bushing only (For IHS356)
(0.533” I.D., 0.840” O.D., 1.12” long)
Order #
Price
IHS710L
(LH)
$239.95
Order #
IHS710R $239.95
(RH)
IHS1304
(LH)
IHS1305
(RH)
IHS707
(LH)
Flat Top Fender Skin w/ Grommet
2-Light Style
Fits: 544, 656, 706, 756, 806, 826, 856, 1026,
1206, 1256, 1456; Will also fit 766 & up if
4-light fenders are ordered
IHS710L Replaces: 399328R2
IHS710R Replaces: 399329R2
$299.95
$299.95
Flat Top Fender 2-Light Style
Fits: 544, 656, 706, 756, 806, 826, 856, 1026,
1206, 1256, 1456
IHS1304 Replaces: 393695R92, 399328R2
IHS1305 Replaces: 393696R92, 399329R2
USA made
NOTE: Restoration quality. Yellow oxide primer.
$156.80
IHS708
$21.15
JDS299
$6.15
IHS755
(LH)
$44.95
IHS1299
(RH)
$44.95
$299.95
$299.95
Flat Top Fender 1-Light Style
Fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566,
1568; Hydros: 70, 86, 100
USA made
NOTE: Restoration quality. Yellow oxide primer.
$156.80
IHS709
(RH)
IHS756
(RH)
IHS1297
(LH)
Price
Mounting Bracket
Fits: IHS710L, IHS710R, IHS1304, IHS1305,
IHS1297 & IHS1299 Fenders
IHS707 Replaces: 391992R91, 399335R1
IHS709 Replaces: 391993R91, 399336R1
U-Bolt For IHS707 & IHS709
Replaces: 388944R2
NOTE: U-Bolt has 3/4” diameter & (2)
required per tractor; Sold individually.
Fender Grommet
Fits: 544, 656, 666, 686, 706, 756, 766, 806,
826, 856, 966, 1026, 1066, 1206, 1256, 1456,
1466, 1468, 1566 & 1568
Replaces: 388940R1
Platform Extension Plate
Fits: 756, 766, 826, 856, 966, 1026, 1066,
1256, 1456, 1466, 1468, 1566 & 1568
IHS755 Replaces: 400715R1 & 534493R2
IHS756 Replaces: 400716R1 & 534494R2
USA made
Grab handle
IHS245
IHS246
Description
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1066, 1206, 1256, 1456, 1466, 1468, 1566 & 1568
(All w/ Gear Drive)
Order # Price
LH Grab Handle..................................................... IHS245................ $39.95
RH Grab Handle.................................................... IHS246................ $39.95
261
Toolboxes, light bar, parts cont...
Order #
Price
IHS369
$68.50
Mounting Step
Replaces: 368578R11
NOTE: Primer. Mounts approximately 4"
below in front of platform.
IHS933
$139.95
Mounting Step (Extended Drop)
NOTE: Primer. Mounts approximately 8"
below in front of platform.
Aftermarket part.
IHS1502
$138.95
IHS374
$99.95
IHS686
$9.00
DEC448
$5.99
Step assemblies - USA made
Order #
IHS711
Price
$53.55
IHS711EX
$59.75
IHS228
(LH)
$78.95
IHS229
(RH)
Double Step Assembly
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568
$78.95 & Hydro 100
Toolbox
Fits: A, B, BN, Super A, 100, 130 & 140
Replaces: 43527DAX
NOTE: Fits under flip-back seat.
Toolbox & Seat Support
Fits: C, Super C w/out remote or fast hitch,
Replaces: 352086R91
USA made NOTE: Red powder coat.
Toolbox & Seat Support
Fits: C, Super C, 200 & 230 w/ remote or
fasthitch, Replaces: 356826R92, 359572R92 &
360710R93 USA made
Toolbox
Fits: H, M, MTA, MD & Supers
Replaces: 999760R91
NOTE: Includes IHS686 brackets & (1)
DEC448 lid decal. Light bar mounted.
Brackets only
(For IHS374 Toolbox)
NOTE: Clamps toolbox to light bar.
Sold in pairs.
Decal only
(For IHS374 Toolbox lid)
Toolboxes, light bar, parts
Order #
Price
ABC308
$29.95
ABC472
IHS232
$59.95
Toolbox (Universal)
Fits: IH models
Bolt holes center to center = 5-1/2"
(11" long, 4" wide, 4-1/2" tall)
Light Bar only
Fits: H, M, MD, MTA & Supers
IHS535
$14.00
$25.95
Toolbox (Universal)
Fits: IH models
(16" long, 4" wide, 4-1/4" tall)
U-Bolt Set only fits: H, M, MD, MTA &
Supers USA made NOTE: Includes: (2)
U-bolts, (4) nuts & (4) washers. Mounts
headlight bar to steering column.
Brake parts
IHS385
$32.95
Toolbox w/ Standard Seat
Replaces: 351014R91
262
Order #
Price
IHS222
$59.95
Brake Cover
Fits: F12, F14 & W12
Replaces: 23664DX USA made
Brake parts cont...
Order #
Price
IHS014
$39.95
Brake Drum
Replaces: 350805R2
IHS880
IHS701
IHS804
IHS687
IHS873
$5.95
$14.95
$12.50
$7.95
$9.95
IHS148
$12.50
IHS1373
$59.45
IHS1374
$59.45
Brake parts cont...
Order #
Price
IHS1375
$55.50
Brake Pedal Return Spring
(Clutch Pedal Spring)
Replaces: 350951R1
(4-1/2" o/a length)
Clutch & Brake Pedal Shaft
Fits: H & HV (Both up to SN: 391357
& w/ band brakes)
Replaces: 50170DA
(22.56" long, 1.130" dia.) USA made
IHS1376
$59.45
Fits: A, B, Super A, 100, 130 & 140
Replaces: 47845DA
(6" o/a length)
Fits: H & HV (Both SN: 391358 & up), Super
H, Super HV, Super W4, 300, 330 & 350
Rowcrop & Utility (All w/ disc brakes)
Replaces: 358051R1
IHS1372
$59.45
(Clutch Pedal Spring)
Replaces: 351210R1
(5-3/4" o/a length)
Fits: M & MV (Both up to SN: 294225);
MD & MDV (Both up to SN: 285504)
(All w/ band brakes)
Replaces: 50079D
IHS1371
$59.45
Fits: M & MV (Both SN: 294226 & up);
MD & MDV (Both SN: 285505 & up);
Super M, MTA, Super W6, W6TA, 400, 450,
W400 & W450 (All w/ disc brakes)
Replaces: 357046R1
(24-3/4" long, 1.130" dia.) USA made
IHS1370
$59.45
JDS1222
$13.25
Brake Pedal Shaft Seal
Fits: 404, 504, 544, 560, 606, 656, 660, 664, 666
& 686; Hydros: 70 & 86
Replaces: 380959R91
(1.125" I.D., 1.832" O.D., .250" wide)
IHS688
$5.95
Rubber Brake Boot / Dust Cover
(For Disc Brakes)
Fits: Late H SN: 391358 & up, Super C, Super
H, 200, 230, 240, 300, 330, 340, 350, Super W4
& OS4, Replaces: 355976R1
IHS690
$5.95
(For Disc Brakes)
Fits: Late M SN: 294226 & up, Super M, MTA,
Super W6, OS6, 400 & 450
Replaces: 357044R1
IHS692
$9.95
(For Disc Brakes)
Fits: 460, 504, 544, 560, 606, 656, 660, 664, 666
& 686; Hydros: 70 & 86;
Industrials: 2504, 2544, 2606 & 2656
Replaces: 368299R1
Fits: H & M (Both w/ band brakes)
Replaces: 48599DA
(8-1/8" o/a length) USA made
Fits: Super H, Super M, Super O6 & W6
series; F300, F350, 400, 450, F460, 560 & 660,
Replaces: 357164R1
(4" o/a length)
NOTE: 4 used per tractor; (2) brake pedal,
(1) clutch pedal, (1) TA handle;
Sold individually.
Brake Pedal Set Screw
Fits: A, B, Super A, 100, 130 & 140
Replaces: 43528D
(1/2"-13 NC) USA made
Fits: C
Replaces: 351212R1
Fits: Super C, 200 & 230
(All w/ disc brakes)
Replaces: 355971R1
Fits: 560 & 660
Replaces: 374850R1
(24-3/4" long, 1.130" dia.) USA made
263
Lined brake bands cont...
Order #
Price
IHS612
$56.45
EACH
Brake lining set
Fits: F12, F14, F20, Regular, I12, I14, O12,
O14, W12 & W14
Replaces: 15101DA & 15102DA
USA made
Description
Order # ABC262
Price
$82.55
EACH
Brake Shoe Lining Set........................................... IHS897................ $54.95
NOTE: Includes: (2) linings & rivets (For 1 wheel only). Rivet to
existing shoes.
Bonded brake discs, parts
NOTE: Check dimensions on discs before ordering.
Order # Order #
Price
ABC426
$15.75
EACH
IHS986
$9.90
EACH
ABC428
$18.25
EACH
Bonded Brake Disc
Fits: Late H SN: 391358 & up, Super H, Super
HV, OS4, SW4, 300 & 350 Rowcrop & Utility
(All w/ factory IH disc brakes)
Replaces: 368183R91, 385195R91 & 1975457C2
(5-5/8" diameter, 10 spline, 1-7/8" spline I.D.)
Sold individually.
IHS826
$9.90
EACH
Adjusting Bolt (For Disc Brakes)
Fits: Late H SN: 391358 & up, Super H, Super
HV, OS4, SW4, 300 & 350 Rowcrop & Utility
Replaces: 358050R1 (3/8" - 24 UNF x 4.25")
USA made NOTE: 2 used per tractor;
Sold individually.
ABC453
$19.45
EACH
Bonded Brake Disc
Fits: Late M SN: 294226 & up, Super M,
(Late MD SN: 285505 & up), Super MD,
Super MV, Super MDV, MTA, OS6, ODS6,
SW6, Super WD6, Super W6TA, Super
WD6TA, 400, W400, 450 & W450
Replaces: 368179R91, 121961C91 &
1963810C2 (6-1/2" dia., 12 spline, 2-1/4"
spline I.D.) NOTE: 4 used per tractor;
Sold individually.
Price
Lined brake bands
NOTE: (1) Lined Brake Band per wheel; (2) required per
ABC337
$44.50
EACH
ABC269
ABC110
$37.40
EACH
$52.15
EACH
IHS231
$44.99
EACH
IHS689
$60.20
EACH
264
Fits: M & MV up to SN: 294226, MD up to SN:
285505, I, O & W6 series
Replaces: 58345DCX
NOTE: Brake rod unpins from lining.
Use to rivet brake linings to existing shoe
or band. Includes a tool to drive out old
rivets, a tool to drill & countersink linings,
a tool to peen the new rivet & instructions.
Mounts into vice.
(1-1/4" throat, 1/8" diameter rivet punch)
Brake Riveting Tool Kit........................................ MIS1131 ............ $31.95
Price
Fits: H & HV (SN: 35130 - 391357), I4, O4, W4
Replaces: 58344DCX
Brake riveting tool
Dimensions
Order #
Application
Application
Replaces: 350967R21
NOTE: Brake rod attached to lining.
Fits: Cub SN: 173601 & up,
Cub Lo-Boy, 154, 184 & 185
Replaces: 358753R21
Fits: A, B, BN & (Super A up to SN: 339641)
Replaces: 51582DDX
NOTE: Brake rod attached to lining.
Fits: Super A SN: 339642 & up, 100, 130 & 140
Replaces: 358660R1
Fits: C
Replaces: 351624R92
Bonded Brake Disc
Fits: Super C, 200, 230, 240, 330, 340 gas, 404
& 2404, Replaces: 356071R91, 368181R92,
368983R91 & 1975456C2
(5" diameter, 10 spline, 1-5/8" spline I.D.)
Fits: Super C, 200, 230
Replaces: 355977R1
(3/8" - 24 UNF x 4.450" ) USA made
Bonded brake discs, parts cont...
Order #
IHS828
ABC561
IHS823
IHS1136
Price
$10.95
EACH
ABC430
Fits: Late M SN: 294226 & up, Super M,
(Late MD SN: 285505 & up), Super MD,
Super MV, Super MDV, MTA, OS6, ODS6,
SW6, Super WD6, Super W6TA, Super
WD6TA, 400, W400, 450 & W450
Replaces: 357040R1 (7/16" - 20 UNF x 4.50")
USA made NOTE: 2 used per tractor;
Sold individually.
$7.50
EACH
Actuating Spring (For Disc Brakes)
Fits: H & HV (Both Behlen & IHC); Super C
& H, O & W series, 200, 230, 240, F300, 330,
340, F350, 404, 460, 504, 544 & 606
Replaces: 354627R1
$8.65
EACH
Actuating Spring (For Disc Brakes)
Fits: Late M SN: 294226 & up, Super M, (Late
MD SN: 285505 & up), Super MD, Super MV,
Super MDV, Super MTA, OS6, ODS6, SW6,
Super WD6, Super W6TA, 400, W400, 450,
W450, 560, 656, 660, 664, 666 & 686;
Hydros: 70 & 86 (All w/ factory IH disc
brakes), Replaces: 357116R1 & 619731C1
(1.209" o/a length, 0.105" wire dia., 0.761"
O.D.) NOTE: 6 used per tractor;
Sold individually.
$5.75
EACH
Disc Brake Actuating Spring
Fits: 354, 364, 384, B-414, 424, 444, 2424
& 2444, Replaces: 3066876R1
(1.188" o/a length, .825" O.D., .110" dia. wire)
ABC1225 $1.80
EACH
ABC434
$18.25
EACH
$19.95
EACH
Disc Brake Ball
Fits: H, HV, M, MD, O-4, OS-4, W-4, W-6,
WD-6, O-6, OS-6, ODS-6, Super C, Super H,
Super HV, Super M, Super MTA, 200, 230,
240, 300, 330, 340, 350, 400, W400, 404, 450,
W450, 460, 504, 544, 560, 606, 660, 656, 2404,
2504, 2606 & 2656; IH Combines: 101, 151,
181, 203, 403, 503, 205, 315, 715, 615, 93, 105,
(815 up to SN: 8000), (915 up to SN: 8000),
Replaces: 09384AB, 16028R1, 16779X &
17028R1 (7/8" dia. steel ball)
Bonded Brake Disc
Fits: 340 diesel, 460, 504 & 606
Replaces: 368292R92 & 1975460C2
(6" dia., 10 spline, 1-7/8" spline I.D.)
Bonded Brake Disc
Fits: IH 354, 364, 384, 424, 444, B414 diesel
SN: 31375 & up, 2300, 2424, 2444, 3414 &
3444, Replaces: 395161R1 & 1975464C2
(6-1/2" dia., 10 spline, 1-5/8" spline I.D.)
Bonded brake discs, parts cont...
Order #
Price
ABC432
$19.95
EACH
IHS1484
$18.95
EACH
ABC442
$21.80
EACH
Bonded Brake Disc
Fits: 560 & 660
Replaces: 369079R92 & 1975446C3
Bonded Brake Disc
Fits: 656, 664, 666, 686 Hydros: 70 & 86,
Replaces: 391445R1, 1975463C2, 1975463C3
(6-1/2" dia., 10 spline, 3-1/2" hub)
Bonded Brake Disc
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1206, Hydro 100 & Hydro 1066
Replaces: 384166R91 & 1975468C2
Rear axle housings /
final drive housings, parts
Order #
Price
IHS027
$299.95
IHS028
$299.95
LH Final Drive Axle Housing
Fits: 100, 130 & 140
NOTE: Ductile, stronger than original.
Close out
ABC1510
$16.95
NEW! Outer Rear Axle Seal
Replaces: 350822R91,2, 358799R1, 547431R91
(0.510" wide)
NOTE: Must reuse seal retainer.
ABC1632
$12.95
LH Final Drive Axle Housing
Fits: Super A
NOTE: Ductile, stronger than original.
Close out
NEW! Rear Outer Flanged Axle Seal
Fits: A, Super A, B, BN
Replaces: 43283D, 358767R91
NOTE: 2 used per tractor, sold individually.
Rear axle housings / final drive housings, parts continue on next page
265
Order #
ABC131
Price
$17.10
$9.30
Description
NEW! Right Hand Rear Axle Nut Seal
Fits: Cub & Seed Drive Plate Seal on final
drive for: A, Super A
Replaces: 382220R91, 53599D
NEW! Upper Differential Shaft Inner Seal
Fits: A, AV, Super A, Super A1, Super AV,
Super AV1, B, BN, 100, 130
Replaces: 51494DA, 358786R91, 358825R91
NOTE: 2 used per tractor, sold individually.
NEW! Rear Axle Seal
Fits the following w/ 2-1/2" O.D. axle: H
& Supers, some F330, some F340, F460 up
to SN: 26549, Replaces: 43722D, 358770R91,
360251R91, 377786R1,2
ABC1565
$13.25
NEW! Rear Axle Seal
Fits the following w/ 2-3/4" O.D. rear axle:
M, MD & Supers, MTA, Late F300, F350, 400,
450, (F460 SN: 26550 & up), F504, I504, F544,
560, 656, 666, 686; Hydros: 70, 86
Replaces: 48776D, 358780R91, 358819R91,
57085D (2.750" I.D., 3.756" O.D., .438" wide)
IHS1516
$17.95
NEW! Final Drive Upper Pinion Shaft Seal
Replaces: 381907R91
(1.600" I.D., 2.378" O.D., .308" wide)
NEW! Final Drive Gasket Set
Fits: Cub, Cub LoBoy, 154, 184, 185
Replaces: 350804R1, 350820R1, 350823R1,
350827R1 USA made NOTE: 2 used per
tractor; Sold individually. Kit contains 1
rear axle housing oil pan gasket, 1 outer
seal cap gasket, 1 inner axle bearing cap
gasket, 1 upper differential shaft gasket.
Fits: B
Replaces: 49371DA USA made
Description
Order # Order #
Price
IHS200
$248.50
RH Bull Pinion fits: 1086 & 1486
Replaces: 104680C1
NOTE: Hollow, w/ diff. lock.
Close out
IHS201
$248.50
LH Bull Pinion fits: 1086 & 1486
Replaces: 104676C1
NOTE: 1 end hollow, w/ diff. lock.
Close out
266
$248.50
Hydraulic parts
Order #
Price
IHS278
$844.95
Live Hydraulic Pump
10 GPM @ 1600 RPM, 1200 PSI
Fits: H w/ F-300 front inner / outer timing
cover; Super H, Super W4, 300, 350 gas
Replaces: 363779R94
NOTE: Customer must cut lines approx.
3/8" to work w/ original #361603R92 all
steel lines. Will work for lines w/ hoses
#369448R91 & w/ IHS1237 port block.
IHS1237
$59.95
Hydraulic Pump Flange
Fits: Super H, Super W4, 300 & 350 gas
(2-3/4" x 4" x 1", 3/4 NPT) USA made
NOTE: Threaded for hydraulic hose.
IHS1440
$21.75
NEW! Hydraulic Dipstick
For the following models when equipped
with Lift All countershaft driven hydraulic
pump: H, HV, M, MV, MD, MDV & Supers
Replaces: 15158EX (11.800" long) USA made
NOTE: Mounts inside the hydraulic pump
breather fill pipe.
IHS284
$844.95
Live Hydraulic Pump
12.6 GPM @ 1450 RPM, 1200 PSI
Fits: M w/ 400 gas inner & outer timing
covers; Super M, Super MTA, W9 gas, WD9,
Super W6, Super W9, Super WD9, T6, 400
& 450 gas, 600 & 650, Replaces: 128190C91,
355554R91, 357214R92 & 362175R94
(Mounting bolt pattern Top 3-3/8" c.c.,
bottom 2-5/8" c.c.) NOTE: Equipped
w/ longer drive shaft to run optional hour
meter off the front timing cover. If your
tractor is not equipped w/ this you may have
to saw 1/2" off end of shaft for clearance.
IHS1240
$59.95
Hydraulic Pump Flange
Fits: M, Super M, 400, 450 gas, diesel, W9,
WD9, Super W9, Super WD9, W6, Super W6,
WD-6, Super WD-6, 600 & 650
(1" block x 2.195" x 4.00", 3/4 NPT)
USA made NOTE: Threaded for hydraulic
hose.
Bull Pinion fits: 1456, 1466, 1468, 4568 & 4586,
Replaces: 528709R2
NOTE: Solid, w/out diff. lock.
Close out
Price
Pedal Guard (21-3/8" long).................................... IHS334B..............$39.95
Bull pinions
IHS199
Price
$10.60
$7.65
Order # Pedal Guard (17-1/2" long).................................... IHS334.................$36.95
ABC1562
ABC1503
Fits: A, BN & Super A;
100, 130 & 140 (All w/out foot accelerator)
Replaces: 48697DB
Rear axle housings /
final drive housings, parts cont...
ABC1512
Pedal guards
Hydraulic parts cont...
Order #
Price
IHS158
$48.95
IHS521
IHS1252
IHS836
$13.50
$4.95
$8.65
IHS366
$8.00
FDS073
$3.50
ABC539
$7.95
ABC540
$3.00
IHS780
$6.45
Hydraulic Pump Drive Gear
Fits: Farmall 756 SN: 17636 & up,
IH 756 SN: 8425 & up, Farmall 856 SN: 27287
& up, IH 856 SN: 9493 & up, 766, 786, 826,
886, 966, 986, 1066, 1086, 1456, 1466, 1486,
1566, 1568, 1586, 3088, 3288, 3688 & Hydro
100, Replaces: 405181R1
NOTE: 19 teeth at 25º tooth angle.
Touch Control Stop
w/ Original Style Handle
Fits: Cub, Super A, C, Super C, 100, 130, 140 &
200, Replaces: 350717R91
Retainer Clip
(For Touch Control Friction Spring)
Fits: Cub, Cub Lo-Boy, Super A, C, Super
C, 100, 130, 140 & 200, Replaces: 351128R1
& 352122R1 USA made NOTE: 2 used per
Touch Control Clevis Pin
Fits: Super A, C, Super C, 100, 130, 140, 200,
230 & 240, Replaces: 350142R1
(1/2" dia., 1-3/8" useable length, 1-9/16" total
length)
Hydraulic parts cont...
Order #
IHS772
Price
$8.95
Position Control Handle Knob
Fits: 544, 656, 666, 686, 706, 756, 766, 806, 826,
856, 966, 1026, 1066, 1206, 1256, 1456, 1466,
1468, 1566 & 1568; Hydros: 70, 86 & 100,
Replaces: 382801R1
Underside View
IHS774
$6.95
Hydraulic Sensitivity Control Knob
Fits: 544, 656, 666, 686, 706, 756, 766, 806, 826,
856, 966, 1026, 1066, 1206, 1256, 1456, 1466,
1468, 1566 & 1568; Hydros: 70, 86 & 100,
Replaces: 382805R1
IHS744
$6.95
Hydraulic Remote Handle Knob
Fits: 706, 756, 766, 806, 826, 856, 966, 1026,
1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568
& Hydro 100, Replaces: 389168R1
(.505" hole I.D.)
Lift All Control Rod Spring / Flat Hold-Down
Spring (For Hydraulic lift lever)
Fits: H, M, Super H & Super M
Replaces: 15137E
Lift Cover Friction Disc
Fits: 354, 2300, 364, 424, 2424, 384, B-414, 444
& 2444, Replaces: 3044397R1
(3" diameter, 3/8" center hole) USA made
Hydraulic Touch Control Fill Plug
Replaces: 445096
(7/8" x 18 NF) USA made
IHS243
$7.15
Hydraulic Remote Knob
Fits: Some 454
Replaces: 397931R2
(7/16" dia. hole, 2" long, 13/16" to 1-5/16"
O.D.) NOTE: Rubber.
IHS706
$29.95
Auxiliary Control Valve Boot
Fits: C, Super A Series, Super C, 100, 130, 140,
200, 230 & 240, Replaces: 356790R1
NOTE: Rubber
Hydraulic Touch Control Fill Plug Gasket
Replaces: 3405H USA made
NOTE: Copper.
Position Control Handle Knob
Fits: 240, 340, 354, 384, 404, B414, 460 Utility,
504 & 606; Lawn & Garden tractors: 70, 71,
72, 73, 100, 102, 104, 106, 122, 124 & 126 (All
up to SN: 400000); 86, 108, 128, 800, 1000 &
1200 (All w/ SN: 400001 & up); 582 & 582 SPL
SN: 66500 & up, Replaces: 371602R1
(3/8- 24 NF hole, 1.062" wide, 0.940" height)
DEC450
$9.65
Hydraulic Touch Handle Decal
Fits: 240, 340, 460, 560 & 660
Replaces: 369778R1 & 127741
USA made
NOTE Vinyl cut w/ white letters.
267
PTO parts cont...
Order #
IHS923
Price
Live PTO Pawl Operating Knob
Fits: 300, 350, 400, 450, W400 & W450
(All w/ live PTO), Replaces: 359108R2
USA made NOTE: Metal.
Cub PTO parts
Fits: Cub, Cub LoBoy (not 154 & up).
Order #
Price
IHS007BK
$57.85
IHS008
$64.95
IHS009
$34.95
IHS010
$34.95
PTO Bearing Kit
Replaces: 126107C1, 369875R1, 69696D &
A31260
NOTE: Kit includes: seal, bearings, snap
rings & retaining ring.
PTO Shaft
Replaces: 351269R4
(11-1/2" o/a length)
IHS978
$5.95
IHS770
$6.95
IHS1545
$16.75
PTO Shift Collar w/ Set Screw
Replaces: 351286R2 (collar)
& 223016 (set screw)
(.817" spline I.D., 6 splines)
PTO Shift Lever & Shaft
Replaces: 351970R31 (lever)
& 351287R1 (shaft)
IHS335
IHS180
$7.25
NEW! PTO Oil Seal
Fits: H SN: 118000 & up, (M, MD & Supers
SN: 59957 & up), Late W4, W6, W9 & Supers;
B250, B275, B414; Also fits the following w/
transmission driven PTO (Not Live): MTA,
300, 330, 350, 354, 364, 384, 400, 424, 434, 444,
450, 454, 544, 600, 650, 2300, 3414, 3514, 3616,
Replaces: 45702D, 3065217R91, 358772R91,
358812R91 (.312" wide) NOTE: Seal may
be narrower then original, 2 seals can be
installed in the older applications if needed.
ABC1543 $12.95
NEW! Live PTO Seal
Fits: Super MTA, 300, 330, 340, 350, 400, 450,
460, 504, 560, 606, 660, W400, W450; Fits 404 as
Transmission Driven PTO seal
Replaces: 359051R91, 360436R91, 364472R91,
364477R91
ABC387
PTO Shaft Oil Seal
Fits the following w/ single or dual speed
PTO: 544, 656, 666, 686, 706, 756, 766, 786,
806, 826, 856, 886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468 & 1486;
Hydros: 70, 86 & 186
Fits the following w/ dual speed PTO only:
3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088,
5288, 5488, 6388, 6588 & 6788
PTO Bearing Retainer Gasket
Replaces: 351258R3
PTO Adaptor Gasket
Replaces: 350837R3
PTO parts
Order #
IHS776
Price
$8.99
Underside View
268
PTO Control Dust Boot
Fits: 544, 656, 666, 686, 706, 756, 766, 786, 806,
826, 856, 886, 966, 986, 1026, 1066, 1086, 1206,
1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586,
3388, 3588, 3788, 4366, 4386, 4568, 4586 & 4786
Hydros: 70, 86, 100 & 186
Replaces: 393071R2
NOTE: Also fits 766, 966, 1066 & Hydro 100
as a differential lock pedal boot.
ABC1550 $14.95
PTO Shift Lever Guide
Replaces: 351967R1
$4.95
Live PTO Pawl Operating Knob
Fits: 330, 340, 460, 560 & 660
(All w/ planetary type PTO)
Sericeable for 300, 350, 400, 450, W400 & W450
Replaces: 359108R1
NOTE: Rubber.
NEW! PTO Oil Seal
Fits: A, B, C, Supers, 100, 130, 140, 200, 230,
240, Replaces: 48114D, 71719C1
$5.00
IHS178
$6.35
PTO Handle Knob
Fits: 544, 656, 664, 666, 686, 706, 756, 766, 806,
826, 856, 966, 1026, 1066, 1206, 1256, 1456,
1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586 &
4786; Hydros: 70, 86 & 100
Replaces: 387885R1
$7.20
PTO parts cont...
Order #
Price
MFS1351
$12.95
Independent PTO Drive Shaft Seal
(For Independent PTO Drive Gear & Shaft)
Fits: 300, 350, 460, 544, 606, 656 & 666
Replaces: 362119R93 & 363514R93
MIS118
PTO shields cont...
Order #
Price
IHS423
$69.30
IHS424
$69.30
$48.50
PTO Over-Running Clutch
Fits: Tractors up to 75 horsepower
(1-1/8" - 6 x 1-3/8", 6 spline)
MIS138
$48.50
PTO Over-Running Clutch
Fits: Tractors up to 75 horsepower
(1-3/8" - 6 x 1-3/8", 6 spline)
PTO Shield
Fits: M SN: 59957 & up, MD & Super M
Replaces: 66424DAXA
(11" o/a length)
USA made
PTO Shield (For Independent PTO)
Fits: MTA, 300, I300, 330, 340, 350, I350, 400,
450, 460, 504, 560, 606 & 660
Replaces: 360181R91 & 364712R21
(6" o/a length)
USA made
Tires, tubes
PTO shields
Order #
Price
IHS425
$99.95
IHS427
IHS619
$90.20
Need a tire or tube not listed?
PTO Shield w/out Belt Pulley
Fits: A, B, C & Supers, 100, 130, 140, 200, 230 &
240, Replaces: 55403DA
NOTE: 10-1/4" o/a length including mounting
bracket.
PTO Shield w/ Belt Pulley
Fits: A, B, C & Supers, 100, 130, 140, 200, 230 &
bracket.
$29.95
Belt Pulley Guard w/ Bracket
Fits: A, B, BN, Super A, AV, 100, 130 & 140
Replaces: 61265D
USA made
IHS426
$69.30
Call Technical Service.
PTO Shield
Fits: H SN: 118000 & up & Super H
Replaces: 66387DAXA
USA made
bracket.
Order #
Price
WHS057
$49.95
Tire only (4.00 x 12")
WHS051
$16.45
EACH
Tube only
(For 4.00 x 12" & 4.80 x 12" Tire)
WHS052
$69.95
Triple rib, 6 ply Tire only
(For 3" x 15" Wheel)
(5.00 x 15")
WHS053
$14.80
EACH
Tube only
(For 4.00, 5.00,
5.50 x 15" Tires) WHS047
$81.40
(5.50 x 16")
WHS048
$98.75
(6.00 x 16")
WHS049
$105.60
6.50 x 16" Tire only
Triple rib, 6 ply
WHS050
$15.25
EACH
Tube only
(For 5.50, 6.00, 6.50 x 16" Tires)
FDS089
$64.35
Multi rib, 4 ply, Tire
(4" x 19")
FDS056TU $14.25
Description / Size
Tube only
(For FDS089 Tire)
269
Front wheel seals
Order #
Front wheel bolts
Order #
Price
ABC399
$1.49
EACH
IHS839
$3.60
EACH
Front Wheel Lug Bolt
Replaces: 351079R1
(1/2"-20 NF, 7/8" thread length, 13/16" hex
head) NOTE: 6 needed per wheel;
Sold individually.
Replaces: 351846R1
(7/16"-20 NF, 5/8" thread length)
USA made
NOTE: 'Dot' on head like original.
$4.25
EACH
IHS777
$4.25
EACH
Front Wheel Bolt w/ Nut
Fits: Late H, Super H, Late M, Late MD,
Super M, Super MD, MTA, 300, 350, 400 &
450 (All w/ adjustable thread front wheels)
Replaces: 181783 (bolt) & 352777R1 (nut)
(5/8"-18 NF, 2-11/16" length, 15/16" hex
head) NOTE: Bolts front wheel to hub.
ABC397
$2.75
EACH
Fits: Late 140, 240, 300 Utility, 330, 340, 350
Utility, B-250, B-275, B-414, 354, 364, 384, 404,
2404, 424, 2424, 444, 2444, 460, 504, 544, 560,
606, 656, 660, 664, 666, 686, 706, 756, 766, 786,
806, 826, 856, 886, 966, 986, 1026, 1066, 1086,
1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568,
1586, 3088, 3288 & 3688; Hydros: 70, 86, 100 &
186, Replaces: 51485D
(9/16"-18 NF, 1-1/8" thread length,
7/8" hex head)
$1.50
EACH
Front Wheel Stud
Fits the following w/out FWA or w/out
cast swept back axle: 385, 395, 454, 474, 484,
485, 495, 574, 584, 585, 595, 595XL, 674, 684,
685, 685XL, 695, 695XL, 784, 884, 885, 885XL,
895, 895XL & 995; Case/IH C50, C60, C80,
C90, C100, 3220, 3230, 4210, 4230 & 4240;
McCormick CX75, CX85, CX95, CX105,
MC80, MC90, MC95, MC100, MC105, MC115,
MC120 & MC135 (2002 & up), Replaces:
453762R1, 453769R1 & 528803R1
(1/2"-20 UNF x 1-3/4" w/ serrated shoulder)
270
IHS1181 $6.50
EACH
IHS1170 $3.80
EACH
IHS1617
ABC268
Price
IHS1162 $5.25
EACH
NEW! Front Wheel Bolt w/Nut & Lock
Washer
Fits: A, Super A, B, BN, C, Super C, 100, 130,
200 & 230, Replaces: 351555R1, R2
(1/2" -13 UNC, 2-1/2" long, square head)
ABC270
$5.85
EACH
IHS1361 $12.95
EACH
IHS1362 $29.95
EACH
Front Wheel Felt Seal
Replaces: 350768R1
(2.216" O.D., 1.6275" I.D., 0.164" thick)
Fits: A, C & Super C (w/ adjustable wide
front); Super A, A-1, AV, Super AV, AV-1; 100,
130 & 140 (if using felt seal); 200 & 230
(All w/ special wide front)
Replaces: 49118DA
(2.574" O.D., 1.806" I.D., 0.166" thick)
Fits: B & BN (w/ double front wheel),
C, Super C, 200 & 230 (tricycle only)
Replaces: 55453D
(2.539" O.D., 1.688" I.D., 0.345" wide)
USA made
Front Dust Seal
Fits the following as a front felt hub seal:
H, M, MD, MTA & Supers, I, O, W4 & 6
& Supers, 300, 350, 354, 364, 384, 400,
W400, (I404, 424, 444, All w/ heavy duty
axle), 450, W450, 460, I504 w/ standard axle,
544, 606 w/ standard axle, 656 & 2300A
(3" O.D., 2" I.D., 1/2" thick)
Front Wheel Bearing Oil Seal
Fits: B250 up to SN: 20101, B275, B414, H,
Super H, F300, F350, (I300 & I350 - both
w/ adj. axle only), (M thru MTA - All
w/ IH adj. wide front), 354, 364, (I404, 424,
444 - All w/ heavy duty axle), 434, F460,
(I460 & I504 - both w/ standard axle), F544,
(I544 & 606 - both w/ standard axle), 656,
2300A, (2424, 2444 - both w/ heavy duty
axle) & 2500, Replaces: 48539D, 48539DA,
358778R1, 368587R1 & 704083R91
(2.786" O.D. x 1.750" I.D. x .294" wide)
Front Wheel Bearing Oil Seal
Fits: M thru MTA (All w/ narrow front end);
I6, O6 thru WD6, 400, 450, W400 & W450;
I300, 330, 340, 460 & 504 (All w/ heavy duty
axle), Replaces: 48704D,DA, 358779R91,
358818R91, 367161R91, 372475R91, 704108R91
& 708108R1
(3.25" O.D. x 2.063" I.D. x .294" wide)
Front wheel bearing kit
Fits: A, B, C, & Supers; 100, 130,
(140 w/ 3 loop rim), 200, 230
Replaces: 360119R92
Description
Order # www.SteinerTractor.com
Price
NEW! Front Wheel Bearing Kit............................ IHS1797.............. $39.95
Front wheels / rims cont...
Order #
Price
FDS071
$40.75
3" x 19" Front Wheel (Blank Center)
Fits: Farmall AV
USA made NOTE: Remove tabs from old rim
& weld into new blank rim.
Front wheel clamp
Fits: A, B, C, H, M, MD & some Supers,
I, O, W4, 6, 9 series, W400, W450, some
100, 130, some 200, 230, 600, 650 & 660
Replaces: 48976DA
(5/8" diameter hole)
Description
Order # IHS193
$57.85
WHS033
$68.60
Price
Front Wheel / Rim Clamp..................................... IHS212................ $7.95
Wheel clamp lock nut
(For Axle Shaft & Front Wheel)
Fits: A, B, BN, C, 100, 130, 200, 230, 240, 330, 340, 404, (424, 444 both w/ standard axle)
& F504 Rowcrop
(5/8"-18 thread)
Description
Order # WHS019
$59.95
3" x 15" Front Wheel (6 Hole)
Fits: 140, F240, F340, F404, F504
Replaces: 370604R91
(4-5/8" pilot, 3" bolt on c.c., 3-1/4" back
spacing)
Front wheels / rims
To determine the width of Wheels / Rims:
Measure the inside (bead to bead) not outside to outside.
Order #
Price
WHS020
$74.95
WHS042
$62.60
6" x 15" Front Wheel (6 Lugs)
Replaces: 371735R3
(Pilot hole = 4.625", 6" bolt circle, 4-3/4"
back spacing) USA made
BACK IN STOCK! 3" x 12" Front Wheel
w/ Wheel Weight Holes
Fits: Cub, Cub LoBoy, Some Cub LoBoy 154,
184, 185 when equipped w/a 5 lug 3" x 12" rim
Replaces: 351074R91, 385651A1
IHS195
WHS022
$48.95
4.25" x 16" Front Wheel (Blank Center)
Fits: Some F12 & F14 when equipped
w/ 16" blank rim; F20 but 1/2" narrower,
H, M, MD, W4, I4, O4, W6, I6, ID6, O6 & WD6
Replaces: 354223R1, 354244R91 (13.465" I.D.)
USA made
NOTE: Electro-coated black, No loops.
3" x 15" Front Wheel (3 Welded Lugs)
Fits: Some A, B, C & Supers,
100, 130, Early 140, 200 & 230
Replaces: 57095D
Not original look
Price
Wheel Clamp Lock Nut......................................... ABC253.............. $15.95
NOTE: No re-threading necessary on worn shafts. Check size before
ordering.
3" x 15" Front Wheel (Blank Center)
Fits: A, B, BN, C, F12 & F14
Replaces: 31453D & 351556R92
USA made
NOTE: Electro-coated black.
$63.95
4-1/2" x 16" Front Wheel (6 Lugs)
(Pilot hole = 4.625", 6" bolt circle, 4"
Front wheels / rims continue on next page
271
Front wheel weights cont...
Order #
Price
Price
WHS043
$78.25
$1.60
IHS327
$142.75 Front Wheel Weight Set
WHS070
Replaces: 364343R92
Fits: A, B, C, H, M & Supers, I, O, W-4, 6
series, 100, 130, 140, 200, 230, F240, F300, F350
Rowcrop, 400 & 450, Replaces: 6788D
NOTE: Set Includes (2) weights,
42.5 lbs. ea piece.
$86.45
Rear axle hub
Fits: 240 & 404 Utilities
Replaces: 369388R1
USA made
Description
What is Back Spacing?
To determine back spacing lay your wheel flat on
the ground with the back of the wheel facing up.
Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface
to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8")
Rear rim bolts
Order #
ABC399
IHS822
Order # LH Weight only....................................................... IHS342L ............ $137.50
IHS839
RH Weight only....................................................... IHS342R . .......... $137.50
Price
IHS331
$124.50
272
Front Wheel Weight Set
Fits: Farmall Cub & Cub Lo-Boy
Replaces: 351371R1
NOTE: Set Includes (2) weights,
30 lbs. each piece.
$1.49
Rear Wheel Lug Bolt
EACH Fits: Cub, Cub Lo-Boy, 154,184 & 185,
$4.95
Rear Rim to Center Nut & Bolt
EACH Fits: Cub & Cub Lo-Boy w/ original rim,
$3.60
Rear Wheel Lug Bolt
EACH Fits: Cub Cadet 70 thru 1650
Replaces: 351846R1
(7/16" - 20 NF x 3/4") USA made
ABC397
Order #
Price
Sold individually
(Will not fit aftermarket rim WHS003)
Replaces: 351085R1
(1/2" - 20 NF x 1-3/4" long)
NOTE: 4 required per rim.
Price
Front Frame Weight Set......................................... IHS342 . ............. $225.00
NOTE: Set Includes (2) weights, 86 lbs. each piece.
Front wheel weights
Price
Replaces: 351079R1
(1/2" - 20 NF, 7/8" thread length, 13/16" hex
head)
Fits: C, 200 & 230
Replaces: 361158R1
Close out
Description
Order # Rear Axle Hub......................................................... IHS151................ $299.95
Front frame weights
Front Weight Carriage Bolt, Washer & Nut Kit
fits: Cub, Cub Lo-Boy, Some 154, 184, 185
(All using 351074R91 Front Rim)
Replaces: 15056R1, 18708R1, 433828 & 88630
(bolt); 102637 & 280431 (nut); 103323 & 80679
(washer) (1/2" diameter, Grade 5 bolt)
NOTE: Zinc finish.
IHS957
Front wheels / rims cont...
Order #
$2.75
Rear Rim Lug Bolt
EACH Fits LH side: A, Super A, B, BN,
100, 130 & 140 (All w/ stamped steel dish);
Fits LH & RH side on the following utility
tractors: B-250, 240, B-275, 300, 330, 340,
350, 354, 364, 384, 404, B414, 424, 444, 454,
460, 464, 484, 574, 584, 606, 674, 684, 784,
884, 2404, 2424 & 3444 (All w/ stamped steel
dish), Replaces: 51485D (9/16" x 18 NF, 1-1/8"
thread length, 7/8" hex head)
Rear rim bolts
Order #
IHS877
Price
cont...
$9.95
Rear Wheel to Rim Bolt
EACH Fits: H, M & Supers series, O, W, 4, 6 series,
(F300 up to SN: 3726), (F400 up to SN: 5180)
Replaces: 48985DA
(Square head; 5/8" x 4-1/4" long)
IHS975
$8.25
Rear Rim to Center Bolt
EACH Fits: I-240, (F300 SN: 3727 & up), I-330, F340,
F350, (F400 SN: 5181 & up), F450, F460, F504,
F560 w/ 15.5 x 38" tires; 666, 686, Hydros: 70
& 86, Replaces: 363017R1
(5/8" diameter NF x 2-1/2" long) USA made
MIS062
MIS063
MIS121
$3.60
EACH Rear Rim Bolt Assembly w/ Nut
Fits: 24" Farmall A thru 240 stamped dish
except Cub
MIS062: 5/8 x 11 x 3-1/2" NC Hex Head
$3.25
w/ washer
EACH
MIS063: 5/8 x 18 x 2-1/2" NF Carriage
$0.50
EACH Flat Washer only
Rear tubes cont...
Order #
Price
WHS063
$59.90
EACH
Rear Tube only
(For 11.2, 12.4 x 34" Tires)
(For 11.2, 12.4 x 36" Tires)
WHS064
$65.25
EACH
Rear Tube only
(For 11.2, 12.4 x 38" Tires)
Rear tire inner tube valves, nut
Order #
Price
ABC531
$5.15
EACH
ABC384
$5.15
EACH
ABC385
$1.35
EACH
(For MIS063 Bolt Assembly)
(5/8" O.D.)
Rear wheel clamp
Fits: H & Supers (All w/ pneumatic tires,
not steel wheels); Early 300 w/ 6194D
rear wheel
Replaces: 6192DBX
Description
Order # Description / Size
Rear Tire Inner Tube Valve
(Air / Water Valve) (New Style)
Fits: Tractor tubes w/ Internal threads
NOTE: Sold Individually.
Rear Tire Inner Tube Valve
(Air / Water Valve) (Old Style)
Fits: Tractor tubes w/ External threads
Brass Nut
(For Rear Tire Inner Tube Valve)
Price
Rear Wheel Clamp................................................. IHS032................ $73.60
Rear rims / wheels
To determine the width of Rims / Wheels:
Measure the inside (bead to bead) not outside to outside.
Rear tubes
Order #
Order #
Price
WHS060
$37.60
EACH
Rear Tube only
(For 7.50, 8.3, 9.5 x 24" Tires)
WHS059
$51.30
EACH
Rear Tube only
(For 11.2, 12.4 x 24" Tires)
WHS058
$56.55
EACH
Rear Tube only
(For 11.2, 12.4 x 28" Tires)
WHS061
$74.50
EACH
Rear Tube only
(For 13.6, 14.9 x 28" Tires)
WHS062
$56.95
EACH
Rear Tube only
(For 9.5 x 32" Tires)
Price
WHS003
$124.85
WHS001
$119.95
Description / Size
7" x 24" Rear Rim (4 Loops)
Fits: Cub
Replaces: 351428R91
(14-1/2" c.c. loops) USA made
Fits: A, B, BN, Super A,
100, 130, 140, 240, etc.
Replaces: 51281DB, 354873R92
NOTE: Uses 5/8" bolts.
Rear rims / wheels continue on next page
273
Rear rims / wheels cont...
Rear rims / wheels cont...
Order #
Price
WHS002
$124.95
WHS025
$199.95
WHS016
(9" x 28")
$128.25
WHS004
(10" x 28")
$148.95
WHS012
(11" x 28")
$152.50
Fits: A, B, BN, Super A,
100, 130, 140, 240, I404, etc.
Replaces: 56206DA, 354876R91, 374807R91
NOTE: Uses 5/8" bolts. Valve stem hole is
on side closest to loops.
9" x 36" Rear Rim (6 Clamps)
Fits: Farmall C, Super C,
200, 230, 240 & 404;
Serviceable for AV & Super AV
NOTE: It will bolt on but the clamps on
our rim are more centered then the original
(original rim clamps at outer edge).
$199.95
WHS018
(11" x 38")
$302.95
274
$229.95
WHS035
(10" x 38")
$275.70
Rear Rim (Double-Bevel)
Fits: 300 & up
WHS024
$295.20 USA made
NOTE: WHS036 has 8 drive lugs.
(14" x 38")
WHS035, WHS037, WHS024 have 18 drive
lugs.
WHS037
(12" x 38")
$275.55
WHS046
$57.60
Reinforcing Ring
(For 9 bolt pattern rim)
USA made
NOTE: Repairs existing 9 bolt rim.
Stop holes are angled.
Rear Rim (Deep Drop Center)
Fits: H, M, MD, Super H,
WHS021
$309.75 Super M, MTA, Early 300 & 400
(14" x 38")
WHS029 Replaces: 55563D
WHS018 Replaces: 55564D
USA made NOTE: Includes stop block except WHS029; must reuse old stop block.
WHS1613
Price
$286.60
Rear spinout rims, parts
WHS013
$168.60 Fits: 300 Utility, etc.
(12" x 28")
WHS004 Replaces: 361700R91
USA made
WHS029
(10" x 38")
Order #
WHS036
(12" x 36")
NEW! 10" x 38" Flat Base Rear Rim
(Blank Center)
Fits: IH models using stamped steel 9
bolt rims USA made NOTE: Bare finish.
Customer must reuse old center. Must
weld or rivet.
Order #
Price
ACS028
(11" x 28")
$359.95
ACS026
(12" x 28")
$389.95
WHS008
(13" x 28")
$389.95
MIS108
$15.95
Rear Spinout Rim (4 Rails)
Fits: 300 Utility & up
USA made NOTE: Rails on WHS008 are
drilled for both style stops (1 rail for
MIS109 & 1 rail for MIS108).
Rear Spinout Rim Stop
(90º Drilled)
MIS109
$14.95
MIS110
$8.95
Rear Spinout Rim Stop
(Parallel Drilled)
Replaces: 365327R2
NOTE: Use for the listed spin out rims.
Stop Bolt (For Rear Spinout Rim Stops)
Replaces: 365326R1
USA made
Rear wheel weight set, parts
Fits: Yellow / White Cub Cadet
Lawn Mower not red tractors
Replaces: 351371R1
IHS331
IHS957
Description
Order # International: Chassis parts
Price
Rear Wheel Weight Set.......................................... IHS331 . ............. $124.50
NOTE: Set Includes (2) weights, 30 lbs. ea piece.
Drawbars, parts cont...
Order #
Price
IHS700
$154.30
IHS910
$141.35
Swinging Drawbar (Straight)
Fits: H
Replaces: 49206DA
(53-1/4" long, 2-1/4" wide, 3/4" thick)
USA made
Like original
NOTE: Bare steel. Pin goes through oval
hole in end.
IHS1786
$134.95
NEW! Heavy Duty Swinging Drawbar
(Straight)
Fits: H
(53-1/4" long, 2-1/2" wide, 3/4" thick) USA made NOTE: This drawbar is the
same as IHS910 except it is 1/4" wider.
IHS912
$141.35
Fits: Super H, 300 & 350
Replaces: 357530R1 & 360632R1
(53-1/4" long, 2-1/4" wide, 1" thick)
USA made
Like original
hole in end.
IHS1790
$134.95
NEW! Heavy Duty Swinging Drawbar
(Straight)
Fits: Super H, 300, 350
(53-1/4" long, 2-1/2" wide, 3/4" thick) USA made NOTE: This drawbar is the
same as the IHS912 except it is 1/4" wider.
IHS914
$141.35
Fits: M, Replaces: 49200DB
(53-1/4" long, 2-1/2" wide, 3/4" thick)
USA made
Like original
hole in end.
IHS916
$141.35
Fits: Super M, MTA, 400 & 450
Replaces: 357529R1 & 359177R1
(53-1/4" long, 2-1/2" wide, 1" thick)
USA made
Like original
hole in end.
Rear Wheel Weight Carriage Bolt........................ IHS957 . ............. $1.60
Washer & Nut Kit
NOTE: 4 used per rim, Sold individually
Fits: Cub, some Cub Lo-Boy 154, 184 & 185
Replaces: 15144R1, 18710R1 & 433848 (bolt);
102637 & 280431 (nut); 80679, 103323 (washer)
(1/2" diameter grade 5 bolt)
Description
Order # Price
Rear Wheel Weight Carriage Bolt........................ IHS959 . .............$2.50
Washer & Nut Kit
NOTE: 4 used per rim; Sold individually.
Cub drawbar parts
Order #
Price
IHS566
$29.95
IHS213
Swinging Drawbar Hardware Kit
NOTE: Kit includes:
(6) - 351679R1 Drawbar bolts
(2) - 103419 Cotter pins
(2) - 220068 Hex nuts
(2) - 179887 Hex HD cap screws
(2) - 103323 Lock ashers
(2) - 106265 Flat washers
(1) - 103408 cotter pin
(1) - Q3558 pin
$4.50
Drawbar Bolt only
EACH Replaces: 351679R1 (5/8" diameter)
USA made NOTE: IHS213 Bolt (Sold
individually) is used to bolt brackets to the
final drive housing. Bolt is also be used for
other applications.
Drawbars, parts
Order #
Price
FDS022
$42.15
FDS211
$29.99
Standard Red 3-Point Drawbar
Category 1
Replaces: 751764R1
(1" x 2-1/2" x 26", 7/8" pin size)
Drawbar Lock
Fits: 404, 504 & 606
NOTE: Will fit FDS022 drawbar.
Drawbar
Fits: Farmall A
Replaces: 43525DAXA
USA made
Drawbars, parts continue on next page
275
Order #
Price
IHS674
$42.95
IHS118
$144.95
Order #
IHS236
IHS1377
Price
$30.50
$12.15
Swinging Drawbar Roller Pin Clevis
Fits: A, B, C, H, M, MD & Supers, 100, 130,
140, 300, 350, 400, 450 & W series
(3-7/8" c.c. pin spacing) USA made
NOTE: Aftermarket part. Will not fit
models w/ fasthitch.
Front Drawbar Pin
Fits: H SN: 39937 & up, Super H, W4 SN:
1133 & up, O4, OS4, 300 thru 460, 404, 504,
544, 606, 656, 664, 666, 686, 706 & 806; Also
fits the following using 1-1/8" dia. pin:
756, (766 up to SN: 13892), 826, 856, (966
up to SN: 27089), 1026, (1066 w/ 2-piece
drawbar), 1206, 1256, 1456, (1466 & 1468
w/ 2-piece drawbar), (1566 up to SN:
7114), (1568 up to SN: 7205), 3514 & 3616
Hydros: 70, 86 & (100 w/ 2-piece
drawbar), Replaces: 57654D
(1-1/8" diameter x 3-1/2" long)
USA made
IHS1378
$14.95
Front Drawbar Pin
Fits: M, MD & Supers using 8874DA pivot
support bracket, 400, 450, W6 SN: 1682 &
up thru WD9 & Supers, 560, 600, 650 &
660, Replaces: 58657D & 58657DA
(1-1/4" diameter x 3-3/4" long)
USA made
IHS1379
$4.95
Drawbar Pin Retainer Plate
Fits: Same as IHS1377 & IHS1378 Pins;
Will also fits 284, 385, 454, 464, 484, 574,
584, 674, 684, 784, 884 & H84
Replaces: 49139D, 57655D & 132794H1
(22.21" long, 1.130" dia.)
USA made NOTE: Zinc plated.
IHS428HM
$49.95
IHS428
$52.00
IHS676
$37.10
276
Swinging Drawbar Roller Shaft Support
Fits: H, M, MD, MTA & Supers
Swinging Drawbar Roller Shaft Support
Fits: F300, 340, 340 Utility, F350, 400, 450,
460, 460 Utility, 504, 544, 560, 656, 664, 666;
Serviceable for H thru MTA
Replaces: 356563R92
Drawbar Brace Rod
Fits: Early H up to SN: 36679, Early M up
to SN: 21090, Replaces: 41119D
(18-1/2" c.c. hole) USA made
Drawbar Brace Rod
Fits: Late H SN: 36680 & up, Late M SN:
21091 & up, Super H, Super M, MTA, 300,
340, 350, 400, 450, 460, 544, 560, 656, 664 &
(17-1/4" c.c. hole) USA made
Drawbar Support (For Fasthitch)
Fits: 706, 806, 826, 1026, 756, 856, Early 766,
966 & Hydro 100
Torsion shafts, parts
Order #
IHS105
Price
$85.75
Slotted 3-Point Torsion Shaft LH Crank
Arm fits: 1206, 1256, 1456, 1066, 1466, 1468,
1566 & 1568, Replaces: 392090R3
IHS054
$299.00
IHS072
$224.50
3-Point Torsion Shaft w/ Hole
Fits: 1086, 1486, 1586, 3388, 3588, 3788,
5088, 5288, 5488, 6388, 6588 & 6788,
Replaces: 71386C1
NOTE: IHS054 can update 1206 - 1568
tractors by replacing slotted style shaft
with improved hole design, but must use
IHS071 & IHS072.
LH Crank Arm w/ Hole
Replaces: 71388C1
NOTE: Bolt style.
IHS071
$224.50
RH Crank Arm w/ Hole
Fits: 1086, 1486, 1586, 3388, 3588, 3788,
5088, 5288, 5488, 6388, 6588 & 6788,
Replaces: 71389C1
NOTE: Bolt style.
IHS752
$15.95
Torsion Shaft Bolt
Replaces: 71390C1
USA made
3-point top-links, parts
Order #
FDS023
Price
$22.50
Top-Link (16" tube length)
Adjustable w/ forged ends w/ 3/4" hole
Category 1
FDS346
$36.65
ABC1427
ABC1429
MIS119
ABC1433
$1.90
$2.50
$4.25
$0.35
$1.50
Price
Deluxe 3-point hitch conversion
This is the "cadillac" of 3-Point Conversions.
The following hitch has #1 welding, machining & paint, zerks on all adjustment screws & is made to use on Category I or II implements.
3-Point Top-Link Pin
w/ a Category 1 3-point hitch
(3/4" O.D., 4-3/4" usable length,
6-1/2" o/a length)
• Includes (2) hydraulic cylinders
(Top-link & Sway bars)
• Use w/ your original drawbar
• USA made
SPECIAL ORDER ONLY
(1" O.D., 4-1/4" usable length,
6" o/a length)
Fits: IH H - 560
Will fit Utilities only if wheels are spread out
Description
3-Point Lynch Pin
Fits: IH / Farmall models equipped
w/ a 3-Point Hitch using a .420" diameter pin
(1-5/8" usable length)
3-Point Lift Arm Top-Link Reducer Bushing
fits: IH / Farmall models w/ a Category
2 3-point hitch switching to a Category 1
3-point hitch
(1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)
Order # Order # Price
Deluxe 3-Point Hitch Conversion....................... IHS277................ $1,010.00
NOTE: For tractors w/ single hydraulics. Customer must put a vent
plug in top of cylinder, NOT supplied by STP, Inc.
(For Fasthitch or 3-Point Conversion
Lift Arm Screw)
Fits: 230, 300, 330, 340, 350, 400, 404, 450, 460, 504, 544, 560, 606, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566 & 1568
Hydros: 70, 86 & 100
Replaces: 523861R2
Description
Order # NEW! Lower 3 Point Link Latch Spring............ IHS1624.............. $14.95
(3/4" O.D., 2-3/4" usable length,
4-5/8" o/a length)
3-point crank arm
Fits the following w/ a Category II
3-point hitch: 504, 544, 606, 656, 664, 666, 686; Hydros: 70, 86
Replaces: 380992R1, 392882R1
USA made
Description
Top-Link (16-3/4" tube length)
Adjustable w/ forged ends w/ 1" hole
Category 2
ABC1431
Lower 3-point link latch spring
Price
Crank Arm............................................................... IHS830 . ............. $18.60
Cultivator parts
Fits Open & closed cultivator shank clips for:
Cub, Super A, Super C, 100 & 200
Replaces: 512384R1
(5/8" dia. thread, 4-1/4" long)
Description
Order # Price
Order # Price
Wedge Bolt & Nut only......................................... IHS024 . .............$9.95
IHS025
Fits: Super A
Replaces: 29600BA
IHS026
Description
Lay Off Clamp & Wedge Assy............................. IHS025 . .............$42.50
Wedge only.............................................................. IHS026 . .............$9.85
277
International: Miscellaneous
Side dresser fertilizer hopper
Made with extremely durable, tough plastic. Base is cast iron w/ new gears.
Fits: Cub, A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240
Fertilizer Attachments: 56D thru 623
Replaces: 620720R91, 626461R91
Underside View
Description
Order # Price
Fertilizer Hopper.................................................... IHS1478 . ...........$325.00
NOTE: Does not include adjustable quadrant. To bolt this hopper
customer must have existing side dresser attachment.
Blade parts
Fits: Cub 54A Blade
Replaces: 651266R91
USA made • Close out
Description
Order # Price
Hydraulic Extension Arm..................................... IHS510 . ............. $78.50
Super A & Model 60 blade parts - USA made
Close out
Mylar decals
(Unless otherwise noted):
INSTRUCTIONS: Have the pitted area filled, sanded smooth &
painted. Wash area with soap & water (new paint included) on which
decal is to be placed.
FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to border
of design where possible prior to removing white backing paper. Lightly
spray the area with window cleaner (do not use window cleaner in
aerosol can). Peel white backing paper from decal and place in position.
Squeegee window cleaner from under decal beginning in center and
working outward. If air bubbles occur, puncture with pin & smooth
down. Please note: These decals have been printed on a tough mylar
film using mylar ink. A pressure sensitive adhesive has been employed
on the back of the mylar to insure good adhesion to any clean, hard
surface.
FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING)
SPECIAL ORDER ONLY: Peel backing paper from decal. The decal will
be stuck to the application paper. Align the decal using the design, not
the application paper, and firmly press decal into place. Slowly remove
the application paper starting at one corner.
Please note: The colors are fused into the vinyl eliminating stacking.
Caution: Inspect all decal pieces before applying to tractor. NO
REFUNDS on mylar decals if applied to surface and/or if damaged. NO
REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in
water.
Order #
Price
Application
Farmall
The following blade parts fit Super A & Model 60 Blade
(Please see diagram):
Order #
Price
IHS504
$11.25
IHS506
IHS507
IHS509
278
$135.00
$33.50
$78.50
Long Bolt Spacer Locator
(10" pipe)
Replaces: 650340R1
Front Lifting Lever
Replaces: 650345R91
Pivot Axle Brace Mount Plate
(Belt Housing Base Plate)
Replaces: 650307R3
Connecting Rod
(Pipe w/ yoke at each end)
Replaces: 650349R91
DEC266
$38.00
Farmall Regular
DEC069
$25.00
F12
DEC070
$25.00
F14
DEC071
$25.00
F20
DEC072
$44.00
F30
McCormick Deering
DEC075
$25.00
W30
DEC077
$40.00
1020
DEC078
$40.00
1530
McCormick Deering 1939-1944
DEC387
$32.00
Early Circle Cub ( To July 1947)
DEC088
$30.00
A
DEC089
$30.00
B
DEC249
$34.00
C
DEC087
$30.00
H
DEC441
$100.00
H Vinyl cut
DEC086
$30.00
M
DEC373
$40.00
W4
DEC374
$40.00
W6
DEC249
Mylar decals cont...
Order #
Price
Application
McCormick Deering 1939-1944
DEC375
$40.00
W9
DEC376
$48.00
WD9
Mylar decals cont...
Order #
International 1945-1954
DEC397
$32.00
McCormick Deering Farmall Cub
(July 1947 - July 1949)
Price
Application
Sets of miscellaneous decals for IH / Farmall tractors
DEC414
$28.00
100, 130, 140 gas (12 pieces)
$28.00
200, 230 gas (9 pieces)
DEC090
$25.00
McCormick Farmall Cub
(post July 1949)
DEC415
DEC416
$28.00
240 gas (11 pieces)
DEC432
$90.00
McCormick Farmall Cub
(post July 1949) Vinyl cut
DEC417
$30.00
300 gas (13 pieces)
DEC091
$25.00
A
DEC418
$32.00
330 gas (12 pieces)
DEC109
$25.00
A Culti-Vision
DEC419
$34.00
340 gas (9 pieces)
DEC235
$34.00
AV Culti-Vision
DEC421
$30.00
350 gas (11 pieces)
DEC092
$34.00
B
DEC423
$24.00
400, 450 gas (11 pieces)
DEC110
$25.00
B Culti-Vision
DEC424
$36.00
400, 450 diesel (15 pieces)
DEC111
$25.00
BN
DEC425
$40.00
460 gas (14 pieces)
DEC112
$25.00
BN Culti-Vision
DEC426
$44.00
460 diesel (17 pieces)
DEC093
$25.00
C
DEC427
$34.00
560, 660 gas (13 pieces)
DEC094
$25.00
H
DEC428
$42.00
560, 660 diesel (15 pieces)
DEC378
$40.00
I4
DEC237
$40.00
I6
DEC436
$4.50
IH Logo (2" x 2-1/4")
DEC095
$25.00
M
DEC463
$7.95
IH Logo (4-1/2" x 4-3/4")
DEC096
$44.00
MD
DEC461
$13.50
International (23-1/2") Vinyl cut
DEC103
$38.00
W4
DEC453
$24.00
DEC104
$38.00
W6
Turbo Decal Pair
1066, 1256, 1456, 1466, 1566
(White & Black) Vinyl cut
DEC105
$38.00
W9
DEC455
$24.00
DEC106
$48.00
WD6
Turbo Decal Pair
1206 (White & Gold) Vinyl cut
DEC107
$48.00
WD9
DEC522
$6.95
Steering Wheel Cap Insert
(For 86 series; Serviceable for other
applications using IHS781 cap) USA printed
DEC450
$9.65
Hydra Touch Handle
(For 240, 340, 460, 560 & 660)
Replaces: 369778R1 & 127741
(2" O.D., White letters) Vinyl cut
DEC091
DEC417
Miscellaneous
DEC095
Super series
DEC097
$25.00
Super A (1947-54)
DEC236
$34.00
Super A Culti-Vision (1947-54)
DEC242
$34.00
Super AV Culti-Vision (1947-54)
DEC098
$25.00
Super C (1951-54)
DEC099
$25.00
Super H (1953-54)
DEC100
$25.00
Super M (1952-54)
DEC101
$30.00
Super MTA gas (1954)
DEC102
$30.00
Super MD (1952-54)
DEC244
$38.00
Super W4 (1953-54)
DEC246
$38.00
Super W6 (1952-54)
DEC247
$40.00
Super W6TA (1954)
DEC245
$48.00
Super WD6 (1952-54)
DEC248
$48.00
Super WD9 (1953-56)
DEC101
DEC522
DEC463
DEC461
DEC453
DEC450
279
Data book
International Harvester Tractor Data Book
by Guy Fay
Everything you need to know about
International tractors in a handy
pocket-sized book. This well-researched
book offers everything from serial numbers,
annual production, and technical data to
optional accessories and much more.
(Sftbd., 4-1/2" x 7-1/2", 192 pgs., 50 b&w)
Description
Order # Price
Data Book................................................................. BOK054.............. $19.95
Farm tractor color historical books
Farmall Regular & F Series Collectors Originality Guide
by Oscar H. Will III & Todd Markle
This book chronicles the changes and
improvements. Provides hard to find
information on design and development of the
'F' series, serial #'s, casting codes, paint codes, and production numbers. A must have for the enthusiast or restorer. Models include the F12, F14, F20, F30, I12, I14, 10-20, W30, Regular, 15-30, 22-36, WA40, WK40, W40 & WD40.
(Hdbd., 8-3/4" x 11-1/2", 128 pgs.)
Description
Order # Price
Description
Classic Farmall Tractors
by Kenneth Updike
Illustrated history of the Farmall tractors from
1922 thru 1975, color and black & white
pictures. Tells the story from the start of the
Farmalls thru the '68' series tractors. Shows
over 60 different models and variations with
specifications. A must have book for the
enthusiast or restorer.
(Hdbd., 8-1/2" x 11", 128 pgs.)
Order # Price
NEW! Classic Farmall Tractors............................. BOK1731............ $24.95
Original Farmall Cub and Cub Cadet
by Kenneth Updike
Includes hard to find information on the
development and design of the Cub, LoBoy,
154, 184, 185 and Cub Cadet 70 thru 982.
Many color and black & white pictures that
show the Cubs in action with different equipment.
(Hdbd., 8-1/4" x 11", 128 pgs.)
Description
Order # Price
NEW! Original Farmall Cub & Cub Cadet........ BOK1748............ $37.95
Original Farmall Hundred Series 1954-1958
by Guy Fay
In 1954 Farmall revamped its line be
redesigning the wildly popular Letter
series & the Hundred Series. Exhibits
several painstakingly restored examples
of the Cub, Cub Lo-Boy, 100, 130, 200, 300, 300 Utility, 330, 350, 350 Utility, 400, W-400, 450,
W-450, 600 & 650. The photos provide close up details of gauges, wheels, carburetors, seats,
decals & more, while full view shots demonstrate how the tractors appeared when they rolled off of showroom floors. Histories and detailed data cover model evolution, mechanical changes, serial number information, paint, accessory codes & more.
(Hdbd., 8-1/4" x 10-5/8", 160 pgs.,
200 color, 50 b&w)
Description
NEW! Farmall Regular & F Series Collectors.... BOK1733............ $26.95
Originality Guide
Farm tractor color historical
books cont...
Order # Price
Original Farmall Hundred Series........................ BOK073.............. $34.95
Legendary Farmall Tractors
A Photographic History
by Lee Klancher with Randy Leffingwell
Chronicles this farming icon with nearly
500 vibrant color photographs. Farmall
tractors have made a mark on the agricultural
landscape ever since the first tractor rolled
off the line and into the fields in 1924. The
classic Letter and Hundred series tractors
are featured alongside the TracTracTors,
the Cub and Cub Cadets, and the gigantic
machines that were the last to wear the
Farmall badge. Even foreign Farmalls and
the latest machines that bear the McCormick
name are profiled. This book celebrates the
beloved Farmalls that legions of collectors
and fans have enjoyed since the very
beginning of the company's history.
(9" x 12", 192 pgs, color)
Description
Order # Price
Legendary Farmall Tractors.................................. BOK1192............ $25.00
280
I & T Shop Service™ manuals
An I & T Shop Service™ Manual tells you how to take a
tractor apart, how to fix it and how to put it back together
again. These are authentic manuals that deal with repairs
in the language of a mechanic with an easy to use format.
They include valuable information as to specifications,
torques, etc illustrated by exploded views and photos. If
you are in serious repairs or restoration, you need an I & T
Shop Service™ Manual. It will offer many short cuts and
save you time!
Service manual reprints
A Service Manual Reprint tells you how to take the tractor
apart, how to fix it and how to put it back together again.
It is a reprint of the manual that the factory furnished the
dealer’s shop service department, and was not sent or given
to individual retail customers. It deals with repairs in the
language of a mechanic. Often times it includes valuable
information as to specifications, torques, etc. A service
manual reprint will offer many short cuts and save you time!
Operator manual reprints
A Operator's Manual (reprint only) sometimes referred
to as the Owner's Manual is the manual that came with
the tractor. It is the manual that was given to the ultimate
Order #
Price
Description
IH2
$34.95
F12, F14, F20, F30, W12, W30 & W40
IH8
$31.95
Super & Non-Super series A, B, C, H, M, MD,
MTA, MTAD, Cub (prior 1957), 4, 6, D6, W6TA,
W6TAD, 9 & WD9
IH10
$31.95
300, 300 Utility, 350, 350 Utility, 350D, 350D
Utility, 400, 400D, W400, W400D, 450, 450D,
W450 & W450D (All gas, diesel)
IH25
$31.95
460, 560, 606, 660 & 2606
IH32
$31.95
706, 756, 806, 856, 1206, 1256, 1456, 2706, 2756,
2806, 2856, 21206 & 21256
IH50
$31.95
IH Cub 154 Lo-Boy, IH Cub 184 Lo-Boy, IH Cub
185 Lo-Boy, Farmall Cub, IH Cub & IH Cub
Lo-Boy
IH201
IH202
IH203
$34.95
$34.95
$34.95
International Harvester Collection: 100, 130,
140, 200, 230, 240, 330, 340, 354, 364, 384, 404,
424, 444, 504, 2404 models, 2424, 2444, 2504
models, B-275, B-414
International Collection: 544, 656, 666, 684, 686,
784, 884, Hydro 70, Hydro 84, Hydro 86, Hydro
100 models, Hydro 186, 1466, 1468, 1566, 1568,
1586
International Collection: 454, 464, 484, 574, 584,
674, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086
consumer by the manufacturer. It can be compared to the
manual you receive in the glove box of a new car. This
manual gives the owner-operator instructions, shift patterns,
capacities (anti-freeze, crankcase, etc.) and adjustment
procedures (brakes, clutch, etc.) This is a very useful and
valuable tool in operating your tractor.
Order #
Price
REP081
$32.75
Farmall Cub before 1960
(Operator's manual)
REP006
$54.95
Cub & Cub Lo-Boy
(Service manual)
IH54
$12.00
Cub 54 A Leveling & Grading Blade
(Operator's & Set Up manual)
REP082
$31.25
Farmall A & AV (Owner's manual)
REP050
$14.50
Farmall A (Serviceman's manual)
REP008
$39.95
A, AV, B & BN
(IH Blue Ribbon Service manual)
REP095
$34.95
Super A & Super AV
(Operator's manual)
IH20
$12.00
McCormick Leveling & Grading Blade for
Farmall A & Super A
(Owner's & Set Up manual)
REP088
$28.95
McCormick-Deering A-192 Farmall Tractor
Plow
(Setting Up Instructions / Parts List)
(Owner's manual)
REP096
$32.00
B (1939-1948)
(Operator's manual)
Description
281
Service / Operator manual reprints cont...
Order #
Price
REP086
$34.95
Service / Operator manual reprints cont...
Description
GPA-1 Genuine IH "Parts - Accessories"
Tractors & Engines (Service Items &
Accessories manual. Also covers A thru 660
Tractors)
Parts manual reprints - Printed in USA
A Parts Manual (reprint only) has exploded views of all
parts on the tractor. With numbered pictures giving you
great detail on assembly and disassembly. It also gives
Order #
Price
Description
REP097
$35.95
C (Operator's manual)
you seem much more informed when talking with a dealer.
REP099
$34.95
Super C
(Operator's manual)
& repair in detail, will simply say "reassemble". If you
REP010
$31.95
H & 4 series
(IH Blue Ribbon Service training course)
REP026
$39.95
Farmall H (Operator's manual)
REP051
$14.50
Farmall H (Serviceman's manual)
REP007
$44.95
M, MD & 6 series, Tractors, Crawler Tractors &
Power Units
(IH Blue Ribbon Service manual)
REP098
$35.95
M, MV gas or LP 1939-1952
(Operator's manual)
REP101
$34.95
Super MTA gas
(Operator's manual)
REP100
$34.95
Farmall 300 & Hi-Clear
(Operator's manual)
REP116
$34.95
International 300 Utility
(Operator's manual)
REP115
$34.95
International 350 Utility gas, LP
(Operator's manual)
you a guide, with numbers, for ordering parts, and makes
Many service manuals, after telling you how to disassemble
have your PTO in the wash tank, in pieces, without notes,
you have a problem. The parts manual can help you out
with an exploded view of the PTO unit, and you can see
immediately how it all goes back together. You need a
parts manual!
Order #
Price
Description
REP1740
$44.95
NEW! Cub & Lo-Boy (1947-79)
NOTE: Does NOT include 154, 184, 185
REP1808
$39.95
NEW! 154, 184, 185
REP1742
$49.95
NEW! A, AV, B, BN; Cultivisions
REP1745
$53.95
NEW! Supers: A, A1, AV, AV1; Cultivisions
REP1741
$49.95
NEW! C
REP1743
$49.95
NEW! Super C
REP1746
$59.95
NEW! H, HV
REP117
$34.95
Farmall 350 Rowcrop
(Operator's Manual)
REP102
$34.95
Farmall 400 gas, LP
(Operator's manual)
REP103
$34.95
Farmall 450 gas, LP
(Operator's manual)
REP1749
$59.95
NEW! M, MD, MV, MDV
REP1806
$48.95
REP104
$32.00
Farmall 560 gas
(Operator's manual)
NEW! 100, 130, Early 140 to SN: 23300
REP1811
$64.95
NEW! 200, 230, 240
REP105
$32.00
Farmall 460 diesel & I-560 diesel
(Operator's manual)
REP118
$45.95
Farmall & Int. 656 gas, diesel
(Operator's Manual)
REP119
$39.95
Farmall & Int. 806 gas, diesel, LP
(Operator's manual)
REP106
$34.95
1206 Farmall & International
(Operator's manual)
REP120
$34.95
International 766, 966, 1066 & 1466
(Operator's manual)
282
Tractor spinner
Awesome in size & realism, this yard / garden spinner shares the exact detailing as the real thing! Made with fade resistant SolarMax® &
SunTexTM fabric each spinner withstands daily UV rays, rain & snow. Includes a heavy duty
fiberglass pole & a ground stake.
(Licensed; 43" x 27-1/2", 18-1/2" dia)
Description
Order # Price
Farmall Spinner (H style)...................................... MIS132............... $69.35
Engine rebuild video
Shows how to completely rebuild the tractors'
engine. You will see the engine disassembled
down to the bare block and then rebuilt step
by step is an easy format.
Tune-up video
Includes rebuilding the carburetor and
distributor, oil and filter change, brake
adjustment and more!
Torque amplifier video
Looks at one of the most common problems
with the Farmalls. Shows you step by step
instructions on how to repair your
torque-amplifier.
VHS Videos are on CLOSE OUT and may be unavailable.
D = DVD (Replacing the VHS videos)
Order #
Price
VID19D $23.35
Description
Farmall Cub & Cub Lo-Boy
(Engine Rebuild)
Farmall Super A, A, BN, C, Super C, 100 & 200
series
VID15D $23.35
(Engine Rebuild)
VID15
$19.00
VID08D $23.35
Farmall Super MTA, M, H, Super H, Super M,
300 & 400 series & IH I series
(Engine Rebuild)
VID20D $23.35
Farmall Cub & Cub Lo-Boy
(Tune-Up)
O
ur books & manuals are a valuable
resource! Take a look at the books
and manuals we offer. The I & T's tell
you how to take apart your tractor, fix
it and put it back together. The service
and operator manuals are reprints and
are those manuals that were originally
furnished with your tractor!
Farmall Super A, A, BN, C, Super C, 100 & 200
series
VID16D $23.35
(Tune-Up)
VID16
$19.00
VID09D $23.35
Farmall M, H, Super M, Super H, 300 & 400,
McCormick W & O series & IH I series
(Tune-Up)
VID10D $23.35
Farmall Super MTA, 300 series TA, 400 series
TA, Super W6TA, 460, 560 & 656TA
(Torque-Amplifier Repair)
283
It's easy to order from Steiner Tractor Parts
Service, selection and speed: that's our promise to you.
Ordering:
Order by phone, fax, mail, or online at
www.SteinerTractor.com.
Phone: 800-234-3280
810-621-3000 (local)
Fax: Complete an order form and fax it to us at
800-854-1373
E-Catalog:
Our website is updated on a regular basis and
contains new products that have been added during
the year, or may not be in this catalog due to space
restrictions.
Email orders to sales@SteinerTractor.com
Tips for faster and more accurate
ordering:
1. To make your order go more smoothly, please fill
out the order form prior to your phone call. This will
also provide a record of the order.
2. Please consider faxing your orders, as we will not
accept responsibility for accuracy of phone orders
unless confirmed in writing.
3. Order by the tractor model and information listed
under each part. Do not order by picture alone. The
pictures are intended for illustration purposes only.
4. Order left hand (LH) and right hand (RH) parts
as if you are seated on the tractor. Upon receiving
your order inspect all parts and ensure proper fit on
tractor prior to installation and/or prior to your final
paint finish (Please see Return / Warranty Policy).
In addition to our complete parts database, secure
ordering system and quick-entry ordering form, you
can participate in our community through tractor
related videos, stories, and blog. In addition, this
catalog and updates, can be downloaded in pdf form
from the site.
If you have any questions concerning the on-line
catalog and / or ordering system please contact
customer service at sales@steinertractorparts.com or
at 1-810-621-3000.
Gift Cards:
A Steiner Tractor Parts gift card makes a perfect
gift any time during the year for that hard-to-shopfor tractor enthusiast! They are available in any
monetary denomination. Call customer service to
order.
We welcome your suggestions.
Payment Terms:
American Express, Mastercard, Visa and Discover are
accepted. All other orders are shipped C.O.D., unless
your order is prepaid including shipping & handling
charges. There is a UPS / Truck Freight fee for all
C.O.D. shipments plus normal shipping & handling
charges.
Should you have any corrections or comments about
the catalog please don't hesitate to talk to one of our
customer service folks. We appreciate your feedback,
and we thank you for your business!
Shipping:
Please see page 5 for shipping information.
Prices:
Prices in this catalog are current, and every effort is
made to hold the prices as printed. Due to changing
costs STP reserves the right to change prices without
notice in order to reflect current costs. This catalog
supersedes all previous catalogs.
284
Order Form: use this to plan and/or send your order!
Then order by calling 800-234-3280 or fax your order to 800-854-1373
For Fastest Service... Write your Customer ID number located above your mailing information on the back of this catalog.
Customer D
Name
First
Address
Last
Middle
Rural route # or street address
City
Box #
State
Zip
Country
Provide phone number for fastest service:
Phone
Area code
Ext.
Fax
Area code
e-Mail
Quantity
STP order number
Description
Page
Price
Total cost
Ordering additional items? Please use separate sheets as needed.
Calculate order amount here
Send me additional order forms.
CHECK Payable to: Steiner Tractor Parts, Inc.
AMERICAN EXPRESS
VISA
C.O.D. Money Order only
MASTERCARD
DISCOVER
Total amount ordered
Sales tax - 6%
(Michigan residents only)
Shipping
(Call for amount)
Handling
(Call for amount)
Expiration Date
Signature
CVV2 Code (Last three digits found on the back of credit card)
4
Total amount
enclosed
285
Terms and conditions
We believe in fair and honest treatment of our valued customers.
Sales Tax:
Michigan residents and showroom purchases or
pickups add 6% sales tax. Remittance of any taxes on
orders shipped outside Michigan is the responsibility
of the purchaser.
Backorders:
Backorders will be shipped as soon as the
merchandise is received, unless cancelled by the
customer. Freight charges will apply to all backorder
items. Orders cancelled after shipping will be subject
to all freight charges and a 20% restocking charge.
Please retain your cancellation confirmation number
in the event a cancelled part is shipped.
Addendum information:
This is a catalog of new replacement tractor parts that
Steiner Tractor Parts, Inc. (STP) manufactures and /
or stocks.
Manufacturers’ names and OEM part numbers are
given for reference purposes only. STP does not
suggest or imply that the replacement parts are
that of the original manufacturer and / or original
equipment.
STP tries to maintain all items in stock, but due to
unforeseen heavy demand or supplier problems,
items may be out of stock. STP will not be
responsible for the delay of items out of stock.
If an item is out of stock and if requested you will
be informed of the approximate shipping date.
This courtesy is not automatic. STP cannot be held
responsible for any typographical errors that may
occur in this catalog. We have done our best to make
sure that the information for each part is correct.
Warranty:
Parts are covered by warranty for 30 days from the
date of purchase. Immediate replacement is given
if defective in workmanship. Our liability is limited
to the replacement of the defective part or refund of
the purchase price. This warranty does not cover
diagnostic, installation labor and/or final paint
finish. A good mechanic should thoroughly clean and
inspect any parts purchased, prior to installation. No
replacement is given if broken by customer. We do
not accept, nor are we responsible for the manner in
which any of these products in this catalog are used.
Neither seller nor manufacturer shall be liable for
any loss, injury or damage, direct or consequential,
arising from the use of, or the inabilities of the
product. After use, the user shall assume all risk and
liability whatsoever in connection therewith.
Book, Manual & DVD / Video Policy:
Steiner Tractor Parts, Inc. does not accept returns for
exchange, refund, or credit on books, manuals and
DVD / videos.
Electrical Parts Policy: Steiner Tractor Parts, Inc.
does not accept returns for exchange, refund, or
credit on electrical parts.
Paint Policy: Steiner Tractor Parts, Inc. does not
accept returns for exchange, refund, or credit on parts
due to paint color. The paint is strictly a primer to
prohibit rust. It is impossible to color match the paint
due to several paint codes that have been changed
throughout the years by the tractors' manufacturers.
The parts must be repainted and in some cases
stripped and repainted. Color of parts may vary from
catalog pictures.
Product returns:
We sincerely hope that you are 100% satisfied with anything you purchase from us. But if this is not the case,
we want to make sure your return is not difficult. Please keep all packing materials and paperwork when you
receive your product delivery. Inspect your shipment carefully so that if there are any problems we can correct
them quickly. There will be instructions with the product in case there is need to return anything. Special order
items are not returnable. Shipping charges are not refundable.
286
Shipping:
General Shipping Information: All prices are Free on Board (FOB)
Lennon, Michigan. The catalog prices DO NOT include shipping and
handling. All orders will be shipped US Mail (USPS), UPS, FedEx or
Truck Freight. Next Day Air, 2nd Day Air and expedited deliveries
are available as offered by the carriers. Rates are dependent upon
weight, dimension, destination and products ordered - call for a
shipping charge quote or check your shipping charge quote on
our website! UPS Hundred Weight Service can be used for orders
exceeding a total of 200 pounds. Exceptions: Items that exceed 150
pounds per piece or are more than 130 inches in length and girth
combined will be shipped by commercial truck. When delivered
to the transportation company, shipments become the property of
the purchaser. Orders are processed in the order in which they are
received and we are not always able to ship all a.m. orders the same
day. For shipping charges e-mail customer service at
Handling:
The catalog prices DO NOT include handling. A handling fee
is in addition to shipping charges and will be applied to all
orders. These charges are subject to change due to weight and
dimensions of the part shipped. Additional fees may also be
required by UPS, FedEx or the truck freight company.
HANDLING FEE ARE AS FOLLOWS:
$2.50 First Box
$1.00 Each Additional Box
$8.00 Each Pallet / Truck Freight
$10.00 Same Day Rush Fee on Non-expedited Shipping
When your package arrives:
UPS / FedEx Shipments:
sales@steinertractor.com
1. When possible, inspect package(s) for outside damage before the
driver leaves. Make sure the driver notes any damage.
Shipping Choices:
2. Check the outside of package for packing slip and note any
backordered items.
Steiner Tractor Parts prefers to ship with UPS. UPS & FedEx
shipments are fully trackable and insurable. We will only ship low
dollar items through the USPS at our discretion. If you request USPS
service for your package, you accept liability in case of a loss or
damage as they are are not always trackable or insurable in the event
of a loss or damage.
International Shipping: Steiner Tractor Parts prefers to ship
internationally with UPS. Canadian customers have a lower cost
UPS option called WorldEase. For internet orders, choose UPS
International Standard and write "WorldEase" in the Special
Instructions box. This lets us know that you understand WorldEase
shipments are charged GST/HST and broker fees in addition to the
transportation rate. The broker fee is reduced on WorldEase packages
as it is divided between all of our Canadian customers requesting
the service. We will not accept liability for international packages
shipped with USPS. USPS shipments can take longer than 30 days for
delivery.
Additional Shipping Fees: Additional shipping fees may be required
by UPS, FedEx or the truck freight company due to weight and
dimensions of the part shipped. Items that exceed 150 pounds per
piece or are more than 130 inches in length and girth combined will
be shipped freight collect by commercial truck. Parts that require
special shipping fees and parts that are shipped by commercial truck
are indicated with the following:
$
Additional shipping fee applies.
(Assessed by UPS - Currently $8.00 and is subject to change
without notice)
3. Open package(s) carefully. DO NOT cut all the way into the
box(es). You may slice decals, cut seat covers & gouge emblems.
4. Remove items and check off on the packing slip.
5. Open & inspect breakable items (lenses, etc.).
6. Check for small items (knobs, boots, etc.) that could be placed into
larger parts (battery boxes, etc.).
7. Inspect items that are sold as left and right to be sure you have
both sides.
8. File the packing slip with your tractor related documents.
If there is any problem, damage, defect, missing or incorrect item
shipped contact us immediately at 1-800-234-3280 or at
sales@steinertractor.com
LTL Freight Shipments:
1. You must be home to accept the shipment.
2. The driver will present several documents. DO NOT sign before
unloading.
3. After you unload the shipment, inspect packages(s) for outside
damage (dents, torn shrink wrap, loose or missing bands, etc.).
4. Check documents and shipment. Make sure you have the correct
number of pieces as stated on the documents. The skid / pallet does
not count as a piece.
5. If all is in order sign the document. If there is any problem, damage
or missing pieces alert the driver. Make a note on the document and
sign. The driver may also sign.
6. Locate packing slip and proceed with Steps 2 - 8 from UPS / FedEx
shipments.
Dimensional weight fee applies.
Damage Shipments / Shortages:
LTL Ship via commercial truck only.
In the event of a damage or shortage to any shipment, please call us
immediately (must notify us within 15 days) for instructions at
1-800-234-3280. Please save all original packaging.
287
Where are my carburetor numbers?
It's the first thing most folks ask when they're confronted with this problem. Here's your easy guide to help
you find the number you need for ordering these parts and check out our website for actual photos of the
carburetors with the number tag location circled.
Marvel Schebler
IMPORTANT
GIVE OUTLINE NO.
STAMPED ON DISC
ON THROTTLE BODY
WHEN ORDERING
CARBURETOR
PARTS.
TSX
#
Example: This is a # TSX159
Small Carburetor
(Number located in either
area)
Large Carburetor
Carter
#
DLTX
DLTX
#
#
(Number is raised
& imprinted)
(Plate is riveted to center body)
#
International
#
(Number is raised or
on brass tag in various
locations. Carter series
used on Farmall
Super A & C)
Farmall H, Super H
Zenith
#
#
Example: This is # 10697
#
Farmall M - 450
(Number is stamped
into housing)
Late Zenith
Farmall 460 & up
(Plate is riveted to mounting flange)
288
Light components
Browse the next few pages to view the replacement parts to brighten up your head & tail lights.
The following parts will fit
4-3/4" diameter lens.
4-3/4"
This includes Steiner lights: ACS150, ACS152, ACS165, ACS205, IHS351R,
IHS351R12V, IHS455, IHS473, IHS351B,
IHS351B12V, JDS318V6, JDS318V12, JDS319V6,
JDS319V12, JDS466, JDS467, JDS475, JDS476,
JDS603, JDS606
IHS475
IHS352
ABC378
Order #
Price
ABC388
IHS353B
IHS474
ABC342
ABC1115
ABC343
IHS353R
IHS918
ABC560
IHS590
IHS355
IHS942
IHS354
IHS436
ABC541
ABC320
ABC536
Description
IHS475
$6.00
Light terminal
IHS352
$14.50
Lens (dimpled outer surface)
ABC388
$14.50
Lens (smooth outer surface)
IHS353B
$14.45
Black ring
IHS353R
$14.45
Red ring
ABC560
$4.10
Seamless gasket
IHS355
$3.85
Gasket
IHS354
$3.00
6-volt bulb
IHS436
$3.00
12-volt bulb
ABC320
$10.90
Reflector (For head & tail lights)
ABC378
$19.95
Reflector (For tail lights w/ red jewel lens & 12-volt bulb in jewel lens)
IHS474
$14.95
Jewel lens w/ base & 6-volt bulb
ABC1115
$14.95
Jewel lens w/ base & 12-volt bulb
ABC342
$1.80
Light bulb (For 6-volt jewel lens)
ABC343
$1.80
Light bulb (For 12-volt jewel lens)
IHS918
$18.50
Combo light switch w/ round knob
IHS590
$6.99
Knob only
IHS942
$7.95
Steel knob
ABC541
$18.50
Combo light switch w/ lever style knob
ABC536
$6.50
Knob only
289
Light components
5-3/4" diameter lens.
This includes Steiner lights: OLS053, OLS055, OLS073, OLS074
OLS062
OLS063
OLS064
ABC358
IHS474
ABC342
ABC359
ABC1115
ABC343
Price
IHS354
OLS068
IHS436
OLS075
OLS154
ABC541
Order #
5-3/4"
This includes Steiner light: ABC336
ABC307
ABC312
ABC347
7"
IHS354
IHS436
IHS475
ABC536
OLS068
ABC358
OLS075
ABC359
Order #
Description
ABC350
Price
Description
OLS062
$29.95 Lens w/ Guide Name
ABC307
$19.65
Flat Lens
OLS063
$24.95 Ring (Zinc-plated)
ABC312
$16.50
Ring
OLS064
$3.95
Gasket
ABC347
$7.95
Gasket
$3.00
Aftermarket 6-volt bulb
$3.00
IHS354
$3.00
IHS354
IHS436
$3.00
IHS436
IHS475
NOTE: IHS354 6-volt bulb is installed in OLS053, OLS073.
IHS436 12-volt bulb is installed in OLS055, OLS074. IHS354 &
IHS436 bulbs fit OLS053, OLS073, OLS055, OLS074 only and
not OEM 5-3/4" tail lights.
NOTE: IHS354 6-volt bulb is installed in ABC336. IHS354 &
IHS436 bulbs fit ABC336 only and not OEM 7" tail lights.
OLS068
$4.95
OEM 6-volt bulb w/ ring, single
contact
OLS068
$4.95
contact
OLS075
$9.65
contact
OLS075
$9.65
contact
ABC358
$7.95
OEM 6-volt bulb w/ ring, double
contact
ABC358
$7.95
contact
ABC359
$11.00
contact
ABC359
$11.00 OEM 12-volt bulb w/ ring, double
contact
NOTE: OLS068, OLS075, ABC358, ABC359 bulbs fit OEM
5-3/4" 6-volt & 12-volt tail lights only.
290
7" diameter lens.
IHS474
$14.95 Jewel lens w/ base & 6-volt bulb
ABC1115
$14.95 Jewel lens w/ base & 12-volt bulb
ABC342
$1.80
Light bulb, miniature bayonnet
base (For 6-volt jewel lens)
ABC343
$1.80
Light bulb, miniature bayonnet
base (For 12-volt jewel lens)
NOTE: OLS068, OLS075, ABC358, ABC359 bulbs fit OEM 7"
tail lights only & not ABC336.
ABC350
$13.90
Reflector
NOTE: Must use IHS354 & IHS436 bulbs to work.
IHS475
$6.00
Light Terminal
Steiner Lights.
NOTE: ABC342 & ABC343 miniature bulbs install behind
IHS474 or ABC1115 red jewel lens assembly.
Order # (Description)
OLS154
$27.85 Reflector (For OLS053, OLS055)
IHS475
$6.00
ABC1439 (6-v Bulb).....$3.45.............ABC544
ABC541
$18.50 Combo light switch w/ lever style
knob
Light Terminal
Price
Steiner Light
ABC1243 (Lens)............$4.90.............ABC546
ABC1243
ABC1439 (6-v Bulb).....$3.45.............ABC548
ABC1439
4-1/2" diameter sealed beam
lens.
4-1/2"
This includes Steiner lights: ABC525, ACS355, IHS647, JDS468,
JDS579, JDS580, JDS581, JDS582
Steiner Lights.
Order # (Description)
Price
Steiner Light
FDS1105
FDS1105 (6-v bulb).......$48.95...........FDS320
FDS1109 (6-v bulb).......$51.80...........FDS323
FDS1101 (12-v bulb).....$51.80...........FDS323
FDS1109
JDS676
ABC527
ABC462
ABC353
ABC460
ABC541
IHS899
Order #
ABC352
Price
FDS1101
Steiner lights.
FDS172, FDS173, FDS444
ABC536
Description
FDS454
JDS676
$18.15
Clamp ring w/ screw
ABC527
$5.40
Concaved mounting washer
ABC352
$7.65
6-volt sealed lo-beam bulb
FDS456
FDS458
FDS458GK
FDS454GK
ABC344
ABC1439
Order #
Price
ABC345
Description
ABC353
$6.25
12-volt sealed lo-beam bulb
ABC462
$16.50
6-volt sealed hi-beam bulb
FDS454
$14.85
Tail light lens (red glass)
ABC460
$16.50
12-volt sealed hi-beam bulb
FDS454GK
$10.80
IHS899
$18.85
12-volt sealed beam combo bulb
Tail light gasket set
(3-3/4" O.D., 3-1/8" c.c. bolt holes)
ABC541
$18.50
Light switch w/ knob
FDS456
$14.85
Tail light ring (stainless steel)
ABC536
$6.50
Knob only
FDS458
$13.25
Tail light license light window glass
lens
FDS458GK
$4.95
Gasket only
ABC1439
$3.45
6-volt bulb (For FDS172, FDS173)
ABC344
$1.80
6-volt bulb (For FDS444)
ABC345
$1.80
12-volt bulb (For FDS444)
bullet style tail lights.
This includes Steiner lights: ACS264V6, ACS264V12, OLS069,
OLS070
Steiner lights.
FDS446, FDS448, FDS442
ABC344
ACS123
Order #
OLS071
Price
OLS072
ABC345
FDS452
Description
ACS123
$14.95
Lens (Red glass; 2-1/8" O.D.)
OLS071
$9.95
Trim ring
OLS072
$2.00
Gasket USA made
ABC344
$1.80
ABC345
$1.80
Order #
Price
ABC344
Description
FDS452
$14.95
Tail light lens (red plastic;
4" O.D., 3-1/8" c.c. bolt holes)
6-volt bulb
ABC344
$1.80
6-volt bulb
12-volt bulb
ABC345
$1.80
12-volt bulb
291
Steiner Tractor Parts, Inc. Map
Download this map on our website at www.SteinerTractor.com/map.jpg
292
Steiner Tractor Parts
retail location
In the neighborhood? Stop by and visit!
Meet our team!
We're pleased to introduce you to some members of
our team that work behind the scenes, on the phone
and face to face with customer service in mind!
Our staff are like family to us — in fact some of them
are! And we're proud to say that they all know so
much about tractors, you'll be able to get all the help
and advice you need.
Jared works on our engineering
team. His expertise in various
3D CAD programs and his
attention to detail makes him
an asset in quality control &
product development.
Tricia has been working as a
customer service representative
for 11 years! She's a pro in the
office and manages the set up
of all our wholesale accounts.
To see a map to our location, please visit our
website at www.SteinerTractor.com/map.jpg
Steiner Tractor Parts, Inc. is located 10 miles
west of Flint, Michigan or 40 miles east of Lansing.
We are off I-69 at Exit 123 (1/2 mile north) at 1660
South M-13, Lennon, Michigan (west side of road).
We are open to the public:
Monday - Friday: 8:00 am - 5:00 pm EST
Saturday: 8:00 am - 12:00 pm EST
Craig is our shipping manager.
He'll lend a hand to anyone, all
the while ensuring that your
order is top priority. Look for
him in our newest YouTube
video!
Matt is the guy that gets the
parts where they need to go.
He's receiving parts all day and
is invaluable to our inventory
and quality control systems.
Patti manages all of the truck
freight orders, while remaining
a helpful representative on the
phone. Her positivity brightens
the office and the day of any
customer she assists.
293

Four Generations - Steiner Tractor Parts

Transcription

Similar documents

International 5 - Steiner Tractor Parts

Engine parts - Steiner Tractor Parts

Ford 4 - Steiner Tractor Parts

Case - Steiner Tractor Parts

Ford 4 - Steiner Tractor Parts

Allis Chalmers - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

A brief history about Ford

International Farmall - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

Case 2 - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

Allis Chalmers - Steiner Tractor Parts

Massey Harris/Ferguson - Steiner Tractor Parts

1 Allis Chalmers A C Allis Chalmers