icr series - Solaira Heaters

Transcription

ICR SERIES
ENGINEER AND ARCHITECT SPECIFICATION
ICR SERIES are engineered for:
COMMERCIAL HIGH OUTPUT RADIANT HEAT
LOW MOUNTING CLEARNACE TO CEILING (6” min)
RECESS APPLICATION
HIGH MOUNTING HEIGHT
CEILING SUSPENDED OR WALL MOUNT
Solairatm high performance, waterproof, shortwave infrared heaters are certified and suitable for outdoor/indoor
use in commercial/Industrial applications and outdoor residential applications. Solaira shortwave technology is
ideal for environments that require high radiant heating efficiency or outdoor environments.
SOLAIRA ICR H3 Form Factor
- Up to 6.0kW, 208-240V
- Mounting Clearance, 99”, up
- Up to 4.0kW, 208-240V
-
- Up to 2.0kW, 208-240V
SOLAIRA ICR H3, H2 and H1 with recess kit (required for recess application)
Trim Kit for H3
Part# SICR-H3-TRMG
Trim Kit for H2
Part# SICR-H2-TRMG
Trim Kit for H1 Part# SICR-H1-TRMG
rd
Solaira ICR Series heaters will be cCSAus Listed for use in Canada and the U.S. and certified to UL 2021, 3 edition Fixed
and Location - Dedicated Electric Room Heaters-Electric and CSA C22.2 No. 46-13 Electric Air Heaters. Solaira ICR Series
Heater may be wall hung, ceiling suspended OR recessed into ceiling structure per manufacturers recommended
instruction manuals. Solaira ICR Series Heaters are suitable for indoor/outdoor in commercial industrial applications and
outdoor use only in residential application. Solaira ICR series heaters are NOT suitable for indoor residential or household
use.
Solaira ICR Series may be ceiling suspended, wall mounted or recessed into ceiling applications with recommended
clearances and in the case of recess application, utilizing appropriate fire rated construction materials per instruction manuals. Solaira ICR Series heaters will utilize only Solaira short wave emitter technology with peak infrared wavelength between 1000
– 1300 nm. Emitters will be manufactured utilizing tubular quartz with tungsten coil and shall be standard low glare or ultra low
glare Candeltm ,thermal shock resistant and will be terminated in a waterproof junction box attached to the fixture. Solaira ICR
Series heaters will have safety guards on face of heater to protect against accidental contact with emitter lamp. Controllable
Heat -Heaters can have variable heat control added as an option (see www.solairaheaters.com). Solaira ICR Series heater enclosures and mounting brackets will be polyester powder coated, 0.9mm 1050 grade aluminum.
Back mesh shall be Aluminum and accessories and all threaded hardware shall be stainless steel. Reflectors shall be
gold coloured 87% reflectivity and manufactured from 0.8mm anodized aluminum. All units are supplied* with adjustable wall
or ceiling mounting bracket, safety wire guard. * Specifications subject to change without notice
7
18
4.409in
112mm
7
6
8
50.465in
1282mm
1
2
3
4
5
C
DRAWN:
S.B.
DATE:
23/09/2014
FICATION
3
DIMETRIC
VIEW
DRAWING
NUMBER:
A
A
5
B
2
6
4.331in 10.02in
110mm 255mm
E
B
DO NOT SCALE DRAWING
SPECTRUM HOUSE, UNIT 1
RIDGACRE ROAD, BLACK LAKE
WEST BROMWICH, WEST MIDLANDS
B71 1BW, UNITED KINGDOM
Tel: +44 (0)121 580
C 6200
Fax: +44 (0)121 580
6222
1.772in
Email: sales@tansun.com
45mm
www.tansun.com
23/09/14
DATE
D
FIRST ANGLE PROJECTION
4in
102mm
O
ORIGINAL ISSUE
8.465in
ISSUE ZONE 215mm
50.465in
1282mm
D
DIMETRIC VIEW
UNLESS OTHERWISE SPECIFIED
www.tansun.com
10.02in
255mm
DIMETRIC VIEW
DIMENSIONS ARE METRIC
TOLERANCES UNLESS STATED
0 PLACES
+/- 1.00
1 PLACE
+/- 0.50
2 PLACES
+/- 0.15
ANGULAR +/- 1 DEGREE
O
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
TANSUN LIMITED. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
TANSUN LIMITED IS PROHIBITED.
ISSUE ZONE
MATERIAL:
SPECIFICATION:
N/A
SCALE:
FINISH:
N/A
DRAWN:
DATE:
DRAWING
NUMBER:
AP-A-DIMS 3AP
7
6
7
8
50.465in
1.772in
1.772in
1282mm
45mm45mm
8.465in
215mm
MATERIAL:
N/A
SPECIFICATION:
N/A
SCALE:
1:9
FINISH:
N/A
16.606in
422mm
S.B.
DRAWN:
DRAWING
NUMBER:
1.772in
23/09/2014
45mm
0 PLACES
+/- 1.00
1 PLACE
+/- 0.50
2 PLACES
+/- 0.15
TANSUN LIMITED. ANY
MODIFICATION
8
SOLAIRA ICR 'H3' GENERAL DIMENSIONS
TITLE:
;<=>!7,;?2@'
8
7
17.339in
440mm MOUNTING HOLE CTRS
50.465in
1282mm
ORIGINAL ISSUE
6
SOLAIRA ICR H1 GENERAL DIMENSIONS
TITLE:
4.409inN/A
1:4
112mm
S.B.
50.465in22/09/2014
1282mm
6
2 PLACES
+/- 0.15
1.772in
45mm
45mm
DATE
1 PLACE
+/- 0.50
5
6
TANSUN LIMITED. ANY
23/09/14
8
16.606in
422mm
5
:+#;/+<.<**=!>$=<#<+%!/+#;+<(!DATE:
DO NOT SCALE DRAWING THIRD ANGLE PROJECTION A3 IF IN DOUBT ASK
TANSUN LIMITED('>;#?,+!=*<!*';%**<!#$%!>$%**<!'(+!1!
1.772in
"*))+<">#,!#$%!>$%'(;<>#,!
Tel: +44 (0)121 580 6200
Fax: +44 (0)121 580 6222
8
4.331in
110mm
4
DIMETRIC VIEW
1.772in
45mm
MODIFICATION
7
4
1.772in
45mm
A3 IF IN DOUBT ASK
N/A
N/A
AP-J-DIMS 3AP
7
0 PLACES
+/- 1.00
4.409in
5
112mm
A3 IF IN DOUBT ASK
A3 IF IN DOUBT ASK
N/A
MODIFICATION
DRAWING
NUMBER:
3
E
E
AP-K-DIMS
8.465in 3AP
215mm
SOLAIRA ICR H1 GENERAL
DIMENSIONS
50.465in
TITLE:
8.465in
215mm
1:4
N/A
"5FF5E$
1.772in
N/A
1282mm
45mm
N/A
MATERIAL:
SPECIFICATION:
SCALE:
FINISH:
DRAWN:
S.B.
DATE:
22/09/2014
DRAWING
NUMBER:
1.772i
45mm
AP-A-DIMS 3AP
DIMENSIONS ARE
METRIC
TITLE:
TECHNICAL
SPECIFICATION
A3 IF IN DOUBT ASK UNLESS OTHERWISE SPECIFIED
SOLAIRA
ICRDO
'H3'
GENERAL
DIMENSIONS
NOT
SCALE DRAWING
TANSUN
LIMITED
A><,B(7!'C!>5BA@,';<AD!
TITLE:
SOLAIRA ICR 'H3' GENERAL DIMENS
SPECTRUM
HOUSE, UNIT 1
Total
Total
Minimum Recommended------------0 PLACES 1 PLACE 2 PLACES
!"#$%&'()&*$+,-(.$/$0123$4$56$72**2**'89'6$:13'&2;$<5=$">?$
C
1.772
SPECIFICATION:
MATERIAL:
+/- 1.00
+/- 0.50
+/- RIDGACRE
0.15
N/A
N/AE
ROAD,
BLACK
LAKE
0 PLACES 1 PLACE 2 PLACES
UNLESS
OTHERWISE
SPECIFIED
A3
DOPower
NOT SCALE
DRAWING
IF IN DOUBT
ASK
FIRST
ANGLE PROJECTION
SPECIFICATION: N/A
MATERIAL: N/A
%),@$AB#C#DECFD##$$C$$G'H@$AB#C#DECF#"!$
Voltage
Current
height
Clearance
Clearance
Replacement
+/- 1.00
+/- 0.50
+/- 0.15
45m
TANSUNANGULAR
LIMITED
WEST BROMWICH,
WEST
MIDLANDS
DIMENSIONS
ARE
METRIC
+/- 1 DEGREE
TITLE:
SCALE:
FINISH:
SOLAIRA
ICR
'H3'
GENERAL
DIMENSIONS
1
:
9
N/A
TOLERANCES
UNLESS
STATED
/I'2,@$21J;K*;,'2&'L)'3)&*.M;I$
$
$C$$N)O*23)@$PPP.*;,'2&'L)'3)&*.M;I$
SPECTRUM
HOUSE,
UNIT
1
B71(WATTS)
1BW, UNITED KINGDOM
+/- 1 DEGREE
SCALE:
FINISH:
MODEL
(Volt)
(Amps)
from floor (inches/cm) to Ceiling
to side wallANGULAR
Weight
1Emitter
:9
N/A
DRAWN:
Tel:
+44 (0)121
580 6200
DIMETRIC
VIEW
S.B.
DRAWING
SPECIFICATION:
MATERIAL: N/A
+/- 1.00
+/- 0.50
+/- 0.15
N/A
DRAWN:
Fax:
+44 (0)121 580 6222240/208
23/09/1425.0/21.6
O
ORIGINAL3AP
ISSUE(305/274cm) 6” (15
S.B.
WEST BROMWICH,
WEST MIDLANDS
SICR60240G
6000/4500
120”/108”
cm)
59”
(150cm)
17.6 lbs (8.0kg)
IWIRE20240
AP-K-DIMS
33.732inNUMBER:
DATE:sales@tansun.com
23/09/2014
Email:
33.732in DRAWING
NUMBER: AP-K-DIMS
SCALE:
FINISH:
1 : 917.6 lbs (8.0kg)
N/A
DATE:
MODIFICATION
ISSUE ZONE 108”/99” (274/250cm)
DATE 18.8/16.2
23/09/2014
SICR45240G
4500/3375
240/208
6” (15
cm) 40” (100cm)
IWIRE15240
www.tansun.com 857mm
Tel: +44 (0)121 580 6200 (LL)
857mm
!
"
#
$
%
&
'
(
&
)
*
)
+
'
,
)
&
.
+
)
!
(
+
&
%
/
0
&
!
$
(
+
)
1
$
%
)
1
/
&
/
%
)
%
1
%
(
0
!
A3
DO
NOT
SCALE
DRAWING
IF
IN
DOUBT ASK UNLESS OTHERWISE SPECIFIED
THIRD
ANGLE
PROJECTION
DRAWN:
Fax: +44 (0)121 580
6222
23/09/14
O
ORIGINAL
ISSUE
S.B.
TANSUN
LIMITED
1.772in
8.465in 16.7/14.41.772in
DRAWING
SICR40240G
4000/3000
240/208
108”/99”
(274/250cm)
6”
(15
cm)
40”
(100cm)
13
lbs
(6.0kg)
IWIRE20240
TITL
NUMBER: AP-K-DIMS
TOLERANCES UNLESS1.772in
STATED
1.772in
8.465in 3AP
SPECTRUM
45mm
45mm HOUSE, UNIT 1
DATE:
MODIFICATION
ISSUE ZONE 215mm
23/09/2014
www.tansun.com
SICR30240G
(LL) DATE
3000/2250
240/208 12.5/10.8
98”/98”
(250/250cm)
6” (15 cm) 40” (100cm)
13
lbs (6.0kg) IWIRE15240
RIDGACRE
ROAD, BLACK
LAKE
PLACES
45mm
215mm0 PLACES 1 PLACE 245mm
MA
+/- 1.00
+/- 0.50
+/- 0.15
WEST BROMWICH,
MIDLANDS
SICR20240G
2000/1500 240/208 8.3/7.2
79”/79”WEST(201/201cm)
6” (15 cm) 40” (100cm) 6.6lbs (3.0kg) IWIRE15240 ANGULAR +/- 1 DEGREE
SCA
D
Clearance from front of heater, all models:
72”Tel: +44 (0)121(180cm)
580 6200
DRA
Fax: +44 (0)121 580 6222
23/09/14
O
ORIGINAL ISSUE
NOTE: All models come standard with Low Glare Lamps,
models marked (LL) are available with ultra Low Glare Candeltm emitters
4.331in
110mm
ATION
4.409in
112mm
C
DIMETRIC VIEW
D
E
D
4.331in
110mm
ON
4
C
DIMETRIC
VIEW
10.02in
255mm
B
S.B.
423/09/2014
50.465in
1282mm
34.465in
TANSUN LIMITED
D
11.218in
285mm
51.173in
3
4in HOLE
7
8
MOUNTING
CTRS
1300mm
102mm
4in
102mm
C
23/09/2014
DATE:
SPECIFICATION:
FINISH:
6
DRAWING
NUMBER:
6
FINISH:
B
C
A
DATE:
4.331in
110mm
1
S.B.
AP-A-DIMS 3AP
1.772in
45mm
1:7
DRAWN:
AP-J-DIMS
3AP
45-*6+"'78.99"$:
5
!
4.409in
"#$#%#!&!'(#!)*%+,(-!
112mm
(#,./#/0102032!4025603278!
(#,./#/0192032!4025603278!
(#,./#/0132032!4025603278!
DRAWN:
DRAWING
NUMBER:
N/A
AP-K-DIMS 3AP
THIRD ANGLE PROJECTION
1:7
TANSUN LIMITED. ANY
2
AP-K-DIMS 3AP
D
4.409in
112mm
1
22/09/2014
TITLE:
ISSUE ZONE
DATESCALE:
FINISH:
S.B.
DATE:
MATERIAL:
0 PLACES
Tel: +/+441.00
(0)121 580 6200
Fax: +44 (0)121 580 6222
SPECIFICATION:
MATERIAL:
SCALE:
DRAWN:
SCALE:
34.465in
1 PLACE 2 PLACES
SPECIFICATION:
MATERIAL:
MOUNTING
CTRS
+/- 0.50875mm
+/- 0.15
N/A ORIGINAL ISSUE HOLE
N/A
23/09/14
O
8
N/A
FINISH:
TANSUN LIMITED. ANY
TITLE:
TITLE:
10.02in
255mm
1:9
TANSUN LIMITED. ANY
B
N/A
2 PLACES
+/- 0.15
5
SOLAIRA ICR H1 GENERAL DIMENSIONS
1.772in
N/A
45mmN/A
1:4
N/A
2 PLACES
+/- 0.15
MODIFICATION
1.772in
45mm
3
4.409in
112mm
METRIC
RIDGACREDIMENSIONS
ROAD, BLACKARE
LAKE
TOLERANCES
STATED
WEST BROMWICH,
WEST UNLESS
MIDLANDS
2
MODIFICATION
1 PLACE
+/- 0.50
110mm 255mm
ZONE
0 PLACES
+/- 1.00
1 PLACE
+/- 0.50
TANSUN LIMITED. ANY
ORIGINAL ISSUE
4.409in1.772in
112mm45mm
www.tansun.com
ORIGINAL ISSUE
7
SPECIFICATION:
N/A
10.02in
255mm 4.331in 10.02in
B
2 PLACES
23/09/14
O
6 MATERIAL:
+/- 0.15
1
ISSUE
DATE
SCALE:
www.tansun.com
N/A
2
1.772in
45mm
11.213in
285mm
Tel: +44 (0)121 580 6200
0 PLACES
PLACE
Fax:
+44 (0)121 1580
6222
+/-sales@tansun.com
1.00
+/- 0.50
Email:
5
23/09/2014
5
DATE:
HOUSE,
UNIT 1SPECIFIED
UNLESS
OTHERWISE
A3 IF IN DOUBT ASKSPECTRUM
TITLE:
O
ISSUE ZONE
,-+).$)'
/+01)'23'
'
TANSUN LIMITED
A
DRAWING
MODIFICATION
NUMBER:
DATE
DIMENSIONS
N/A
FINISH:
4
23/09/14
0 PLACES
+/- 1.00
10.02in
255mm
1
E
51.173in
4in HOLE CTRS
1300mm MOUNTING
102mm THIRD ANGLE PROJECTION
TANSUN LIMITED DO NOT SCALE DRAWING
10.02in
255mm
11.213in
285mm
4
TANSUN LIMITED. ANY
IN PART OR
AS A WHOLE
ISSUE
DATE
ZONE
DREPRODUCTION
TANSUN
LIMITED IS PROHIBITED.
4
8.465in
1.772in
51.173in
215mm MOUNTING45mm
HOLE CTRS
1300mm
RIDGACRE
ROAD,
BLACK LAKE
UNLESS
OTHERWISE
SPECIFIED
ASK
WEST BROMWICH,
WEST MIDLANDS
DIMENSIONS
ARE METRIC
B71 1BW,
UNITED KINGDOM
TOLERANCES
UNLESS STATED
A3 IF IN DOUBT
CTION
2
1:9
www.tansun.com
!"#"$"%&"'()%*)+'
S.B.
www.tansun.com
MODIFICATION
3
1.772in
45mm
E
C
ISSUE ZONE
DIMETRIC VIEW SPECIFICATION:
N/A
23/09/14
ISSUE
DRAWING IS THEO
SOLE PROPERTY OFORIGINAL
DRAWN:
A
4.409in
112mm
A
ORIGINAL ISSUE
MATERIAL:
SCALE:
11.213in
285mm
DATE
www.tansun.com 1
O
Tel: +44 (0)121 580 6200
Fax: +44 (0)121 580 6222
A3 IF IN DOUBT ASK
ANGLE PROJECTION
11.218in
285mm
23/09/14
2
SOLAIRA
33.732in
857mm
ICR
'H3' GENERAL
A3 IF IN DOUBT ASK
THIRD ANGLE PROJECTION
1.772in
45mm
10.738in
273mm REF.
1
110mm
Tel: +44 (0)121 580 6200
Fax: +44 (0)121 580 6222
B
+/- 1.00
+/- 0.50
+/- 0.15
8
3
7
6
D
TITLE:
DO
NOT SCALE
DRAWING
THIRD
TOLERANCES
UNLESS
STATED
11.213in
4.331in
285mm
4.331in
110mm
4
A3 IF IN DOUBT ASK
8
16.606in
422mm
Tel: +44 (0)121 580 6200
Fax: +44 (0)121 580 6222
TANSUN LIMITED
WEST BROMWICH, WEST
MIDLANDS
5
1.772in
45mm
E
TANSUN LIMITED
11.213in
285mm
4.331in 10.02in
110mm 255mm
1.772in
45mm
45mm
7
10.02in
255mm
D
DIMETRIC VIEW
C
17.339in
33.732in
857mm
1.772in
6
4.331in
110mm
10.738in
273mm REF.
8.465in
215mm
4.409in
112mm
E
1282mm
8
4.331in
110mm
51.173in
50.465in
HOLE CTRS
1300mm MOUNTING
7
DIMETRIC VIEW
1.772in
45mm
A
8
17.339in
6
4.409in
112mm
5
7
6
4.331in
110mm
4.331in
110mm
11.218in
285mm
3
B
TANSUN LIMITED
5
Solaira ICR H1 (2.0kW, 240)
B
D
C
4
4.409in
112mm
4
Solaira ICR
H2 (4.0/3.0kW, 240)
DIMETRIC VIEW
A
2
E
3
4.331in
110mm
C
D
1
2
A
ENGINEER AND ARCHITECT SPECIFICATION
DIMETRIC VIEW
Solaira ICR
H3 (6.0/4.5kW, 240)
10.02in
255mm
10.02in
255mm
11.213in
285mm
4.409in
112mm
10.02in
255mm
5
1
B
8
ICR SERIES
4
B
34.465in
A
7
6
11.218in
285mm
3
5
10.02in
255mm
2
34.465in
A
4in
102mm
4
10.738in
273mm REF.
1
C
3
10.02in
255mm
4.409in
112mm
2
11.218in
285mm
6
B
10.02in
255mm
5
11.213in
285mm
4
TANSUN LIMITED. ANY
TANSUN LIMITED. ANY
TANSUN LIMITED. ANY
A3 IF IN DOUBT ASK
DATE
www.tansun.com
TITLE:
SOLAIRA
ICRDO
'H3'
GENERAL
DIMENSIONS
NOT
SCALE DRAWING
TANSUN
LIMITED
4.331in
110mm
4.331in
110mm
E
ISSUE ZONE
A3 IF IN DOUBT ASK
TANSUN LIMITED. ANY
MODIFICATION
DA
SOLAIRA ICR 'H3' GENERAL DIMENSION
SICR-H3-TRMG
Solaira
ICR
SPECTRUM
HOUSE, UNIT
1 Series Trim Kit for H3 (6.0/4.5kW) (required for recess application per cCSAus approval)
TITLE:
SPECIFICATION: N/A
MATERIAL: N/A
+/- 1.00
+/- 0.50
+/- RIDGACRE
0.15
ROAD, BLACK
LAKE Series
SICR-H2-TRMG
Solaira
ICR
Trim Kit for H2 (4.0/43.0kW) (required for recess application
per +/-cCSAus
MATERIAL: N/A
+/- 1.00
0.50
+/- 0.15 approval)
WEST BROMWICH,
SCALE:
1WEST
: 9 MIDLANDS FINISH:
B71 1BW,Solaira
UNITED KINGDOM
SICR-H1-TRMG
ICR Series TrimN/A
Kit for H1 (2.0kW) (required for recess application per cCSAus
approval)
SCALE:
1:9
DRAWN:
Tel:
+44 (0)121 580 6200
TANSUN LIMITED. ANY
REPRODUCTION IN PART OR AS A WHOLE Fax: +44 (0)121 580 6222
DATE:sales@tansun.com
Email:
S.B.
DRAWING
23/09/14
NUMBER:
O
ORIGINAL ISSUE
AP-K-DIMS
1.772in 3AP
TANSUN LIMITED. ANY
S.B.
SPECIFICATION:
N/A
FINISH:
N/A
23/09/2014
NUMBER: AP-K-DIMS
1.772in DATE:
1.772in 3
SOLAIRA ICR45mm
SERIES
SUBMITTALDATE ISSUE ZONE 45mm
MODIFICATION
23/09/2014
www.tansun.com
45mm
45mm
JOB NAME
_____________________________________________ JOB LOCATION___________________________________
ARCHITECT _________________________________________________ENGINEER
___________________________________
CONTRACTOR _______________________________________________SUBMITTED BY_______________________DATE_______
ITEM
SPEC_________________________________
QTY_______________CONTROLS______________________________
OTHERWISE
SPECIFIED
IF IN DOUBT ASK UNLESS
TITLE:
DO
NOT SCALE
THIRDDIMENSIONS
ANGLE PROJECTION A3 IF IN DOUBT ASK UNLESS OTHERWISE SPECIFIED
SOLAIRA
ICRDRAWING
'H2' GENERAL
TANSUN
TOLERANCES UNLESSLIMITED
STATED
TITLE:
SOLAIRA ICR 'H2' GENERAL DIMENSION
SPECTRUM
HOUSE,
1
0 PLACES
1 PLACE
2 PLACES
Solaira
tm
is
a UNIT
registered
trademark SPECIFICATION:
of Inforesight Consumer Products Inc,
* Specifications
subject to change without notice
MATERIAL:
+/- 1.00
+/- 0.50
+/- 0.15
1.772in
N
E
N/A
RIDGACRE
LAKE
Canada:ROAD,
125BLACK
Traders
Blvd #4,
Mississauga, Ontario
WESTANGULAR
BROMWICH,
WEST MIDLANDS
+/- 1 DEGREE
SCALE:
FINISH:
1 :local
7 905-568-7655
Phone:
866-321-8373
B71
1BW, UNITED
KINGDOM
DRAWING
SOLE
PROPERTY
OF6200DRAWN:
Tel: IS THE
+44
(0)121
580
TANSUN LIMITED. ANY
Fax: +44
(0)121
6222
REPRODUCTION
IN PART
OR AS A580
WHOLE
DATE:
Email:
sales@tansun.com
TANSUN
LIMITED
IS PROHIBITED.
www.tansun.com
S.B.
23/09/14
O
23/09/2014
DATE
N/A
N/A Fax: 905-568-7521 web: www.solairaheaters.com
ISSUE
AP-J-DIMS
3AP
DRAWING
NUMBER: ORIGINAL
ISSUE ZONE
MODIFICATION
0 PLACES
+/- 1.00
1 PLACE
+/- 0.50
2 PLACES
+/- 0.15
DRAWN:
MATERIAL:
N/A
SPECIFICATION:
N/A
SCALE:
1:7
FINISH:
N/A
DRAWN:
S.B.
DATE:
23/09/2014
email: info@solairaheaters.com
TANSUN LIMITED. ANY
DRAWING
DRAWING
NUMBER:
AP-J-DIMS 3

icr series - Solaira Heaters

Transcription

Similar documents

Technical Data for Alicat MC andMCR Mass Flow Controllers

ultra rt8 led