MADE IN THE USA

Transcription

MADE IN THE USA

DAKOTA ULTRASONICS
The CMX DL+
A/B Scan Material & Coating Thickness Gauges
The Finest in
Portable
Inspection!
Highlights:
▶ Powered by a 100MHz DSP platform
using FPGA technology.
▶ Display Options: Grayscale 1/8 VGA,
or AMOLED color 1/4 VGA.
▶ Two Channels—Dual pulsers and
receivers.
▶ Up to 140Hz pulse repetition rate.
▶ Screen refresh: B&W 25 Hz, Color
120 Hz.
▶ Adjustable gain: -30 dB to 70 dB
range.
▶ Automatic gain control (AGC).
▶ Time corrected gain (TCG).
▶ Data storage (32 Megabit of non-
volatile RAM).
S O U N D
S O L UT I O N S
C M X D L + S P E C I F I C AT I O N S
Physical
Transducer
Display
Size:
Width (2.5in/63.5 mm)
Height (6.5 in/165 mm)
Depth (1.24 in/31.5 mm)
Transducer Types:
Large Digits - Standard thickness
view. Digit Height: 0.700 inches
(17.78 millimeters). Color 0.565 in (14.35
mm).
Weight: 13.5 ounces (with batteries).
Keyboard: Membrane switch pad with
twelve tactile keys.
Operating Temperature:
14 to 140F (-10C to 60C)
Case: Extruded aluminum body with nickelplated aluminum end caps (gasket sealed).
Data Output: Bi-directional RS232 serial
port. Windows® PC interface software.
Display(Two Options): 1/8in VGA grayscale
display (240 x 160 pixels). Viewable area 2.4
x 1.8in (62 x 45.7mm). EL backlit (on/off/
auto). 25 Hz screen refresh rate.
1/4 VGA AMOLED color display (320 x 240
pixels). Viewable area 1.7 x 2.27 in (43.2 x
57.6 mm). 120 Hz screen refresh rate.
Ultrasonic Specifications
Measurement Modes:
Coating Off: Pulse-Echo (P-E)
Coating On: Pulse-Echo Coating (PECT)
Temp Comp: Pulse-Echo Temperature Compensation (PETP)
Thru-Paint: Echo-Echo (E-E)
Thru-Paint Verify: Echo-Echo Verify (E-EV)
Coating Only: Coating (CT)
Pulser: Dual square wave pulsers.
Receiver: Dual receivers - manual or AGC
gain control with 110dB range (limited).
Adjustable damping with color option.
Timing: Precision 25 MHz TCXO with
single shot 100 MHz 8 bit ultra low power
digitizer.
Dual / Single Element (1 to 15 MHz).
Flaw Prove Up (1 to 10MHz).
Locking quick disconnect
“00” LEMO connectors.
Standard 4 foot cable.
Custom transducers and cable
lengths available for special
applications.
Measuring
Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 19.999 inches
(0.63 to 508 millimeters).
Pulse-Echo Coating Mode
(PECT) - (Material, Coating, Pit &
Flaw Detection); Material: 0.025
to 19.999 inches (0.63 to 508 millimeters).
Coating: 0.001 to 0.100 inches (0.01 to 2.54
millimeters).
Pulse-Echo Temp Comp Mode
(PETP) - (Pit & Flaw Detection) Auto
temperature compensation - measures
from 0.025 to 19.999 inches (0.63 to 508
millimeters).
Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.100 to 4.0 inches
(2.54 to 102 millimeters). Range will vary
+/- depending on the coating.
Echo-Echo Verify Mode (E-EV) - (Thru Paint
& Coatings) measures from 0.100 to 1.0
inches (2.54 to 102 millimeters). Range will
vary +/- depending on the coating.
Coating Only Mode (CT) - (Coating Thickness) Measures from 0.0005 to 0.100 inches
(0.0127 to 2.54 millimeters). Range will vary
Flaw Mode: Basic mode using angle beam
transducers. Color offers D1.1 linearity.
Power Source
Resolution: +/- 0.001 inches (0.01 mm).
Three 1.5V alkaline or 1.2V NiCad AA cells.
Velocity Range:
Alkaline: grayscale 35 hrs, color 12 hrs.
Nicad: grayscale 10 hrs, color 5 hrs.
0.0492 to 0.5510 inches/µs
1250 to 13995 meters/sec
Power saving DIM feature for color display.
Single and Two point calibration option
for material & coating,
� or selection of basic
material types.
Auto power off if idle 5 minutes.
Battery status icon.
& Thickness Gauge
A-Scan - Rectified +/- (flaw view), RF (full
waveform view).
B-Scan - Time based cross section
view. Display speed; grayscale (15 secs per
screen), color (variable speed).
Scan Bar Thickness - 6 readings
per second. Viewable in B-Scan
and Large Digit views.
Repeatability Bar Graph - Bar
graph indicates stability of reading.
Feature Status Bar - Indicates
features currently active.
Memory (CMX DL)
Log Formats:
Grid (alpha numeric)
Sequential (auto identifier)
Cell contents:
Graphics On: grayscale 16,000 & color 8,000
readings, A/B Scan image, & gauge settings
for every reading.
Graphics Off: 210,000 readings (coating,
material, min & max).
OBSTRUCT to indicate inaccessible locations.
Connections
Output: RS232 serial interface. PC software
& USB converter cable included.
Transducer Connectors: Two LEMO 00
connectors.
Certification
Thickness Gauge: Factory calibration traceable to NIST & MIL-STD-45662A.
Warranty
2 year limited
Units: English & Metric
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
1500 Green Hills Road, #107
Scotts Valley, CA 95066
Ph: (831) 431-9722
Fax: (831) 431-9723
Website: www.dakotaultrasonics.com
Email: info@dakotaultrasonics.com
DAKOTA ULTRASONICS
Performance, Power & Perfection!
The CMX Series
Material & Coating Thickness Gauges
Electronic Platform:
▶
Powered by a 100MHz DSP platform using FPGA technology.
▶ Two Channels - Dual pulsers and receivers.
▶ Up to 140Hz pulse repetition rate.
▶ Display update rate of 25 times per second.
▶ Adjustable gain settings - vlow, low, med, hi, vhi.
▶ Automatic gain control (AGC).
▶ Time corrected gain (TCG).
▶ Massive data storage (32 Megabit of non-volatile RAM).
Features:
▶ Measurement modes: Pulse-Echo, Pulse-Echo
w/Coating, Pulse-Echo w/Temperature Compen
sation, Echo-Echo, Echo-Echo Verify & Coating
Only.
▶ Automatic: probe zero, probe recognition,
and temperature compensation.
▶ Stores up to 64 custom setups for specific
applications.
▶ High Speed Scan of up to 50 readings per
second.
▶ Audible/visual alarm with hi and lo limit
settings.
▶ Built-in differential mode for QC inspetions.
▶ Time based B-Scan feature for cross
section material scans.
▶ Data storage formats: Alpha numeric
grid and sequential w/auto identifier.
▶ Windows PC software included.
▶ 2 year limited warranty.
S O U N D
S O L UT I O N S
C M X & C M X D L S P E C I F I C AT I O N S
Physical
Transducer
Display
Size:
Depth (1.24 in/31.5 mm)
Transducer Types:
Large Digits - Standard thickness
view. Digit Height: 0.700 inches
(17.78 millimeters).
Weight: 13.5 ounces (with batteries).
Keyboard: Membrane switch pad with
twelve tactile keys.
14 to 140F (-10C to 60C)
Case: Extruded aluminum body with nickelplated aluminum end caps (gasket sealed).
Data Output: Bi-directional RS232 serial
port. Windows® PC interface software.
Display: 1/8in VGA grayscale display (240 x
160 pixels). Viewable area 2.4 x 1.8in (62 x
45.7mm). EL backlit (on/off/auto).
Measurement Modes:
Coating Off: Pulse-Echo (P-E)
Coating On: Pulse-Echo Coating (PECT)
Temp Comp: Pulse-Echo Temperature Compensation (PETP)
Thru-Paint: Echo-Echo (E-E)
Thru-Paint Verify: Echo-Echo Verify (E-EV)
Coating Only: Coating (CT)
Receiver: Dual receivers - manual or AGC
gain control with 110dB range (limited).
Timing: Precision 25 MHz TCXO with
single shot 100 MHz 8 bit ultra low power
digitizer.
Dual Element (1 to 10 MHz).
applications.
Measuring
Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 19.999 inches
(0.63 to 508 millimeters).
Pulse-Echo Coating Mode
(PECT) - (Material, Coating, Pit &
Flaw Detection); Material: 0.025
to 19.999 inches (0.63 to 508 millimeters).
Coating: 0.001 to 0.100 inches (0.01 to 2.54
millimeters).
Pulse-Echo Temp Comp Mode
(PETP) - (Pit & Flaw Detection) Auto
temperature compensation - measures
from 0.025 to 19.999 inches (0.63 to 508
millimeters).
Echo-Echo Mode (E-E) - (Thru Paint & Coatings) measures from 0.100 to 4.0 inches
(2.54 to 102 millimeters). Range will vary
Echo-Echo Verify Mode (E-EV) - (Thru Paint
& Coatings) measures from 0.100 to 1.0
inches (2.54 to 102 millimeters). Range will
vary +/- depending on the coating.
B-Scan - Time based cross section
view. Display speed of 15
secs per screen.
Scan Bar Thickness - 6 readings
per second. Viewable in B-Scan
and Large Digit views.
Repeatability Bar Graph - Bar
graph indicates stability of reading.
Feature Status Bar - Indicates
features currently active.
Memory (CMX DL)
Log Formats:
Sequential (auto identifier)
Cell contents:
Graphics On: 16,000 readings ,BScan
image, & gauge settings for
every reading.
Graphics Off: 210,000 readings (coating,
material, min & max).
Memory:
32 megabit non-volatile ram.
Connections
Power Source
Coating Only Mode (CT) - (Coating Thickness) Measures from 0.0005 to 0.100 inches
(0.0127 to 2.54 millimeters). Range will vary
Resolution:
Certification
Typically operates for 35 hours on alkaline and 10 hours on NiCad (charger not
included).
+/- 0.001 inches (0.01 mm)
Factory calibration traceable to NIST & MILSTD-45662A.
& Thickness Gauge
Velocity Range:
0.0492 to 0.5510 inches/µs
Single and Two point calibration option
for material & coating, or selection of basic
material types.
Units:
English & Metric
connectors.
Warranty
2 year limited
�
MADE IN THE USA
Distributed By:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The Best of Both Worlds...
The DFX-7 Series
Flaw Detector & Thickness Gauge
Flaw Detector:
▶ Sizing Toolkits: DAC, AWS, TCG, DGS.
▶ Exceptional visibility in sunlight (AMOLED)
color VGA display (320x240 pixels).
▶ P.R.F. - 8 to 333 Hz, adjustable.
▶ Screen Refresh Rate: Adjustable 60 & 120 Hz.
▶ Detection: Z-Cross, Flank & Peak.
Thickness Gauge:
Automatic: probe zero, probe recognition, and
Temperature compensation.
▶ Measurement: Variety of modes to address a
number of applications.
▶ Large data storage with multiple formats: Alpha
numeric grid and sequential w/auto identifier.
▶ Up to 12 hours of battery life using 3 AA cells.
4Windows PC interface software included.
▶
S O U N D
S O L UT I O N S
D F X - 7 S E R I E S S P E C I F I C AT I O N S
General
Receiver
Thickness Gauge (Features) - (Con’t)
Size: 2.5W x 6.5H x 1.24D in (63.5 x 165 x 1.5mm).
Gain: 0 to 110dB with 0.2dB resolution. Manual
and AGC control.
Echo-Echo Mode (E-E) - (Thru Paint & Coatings)
measures from 0.050 to 4.0 inches (1.27 to 102
millimeters). Will vary based on coating.
Weight: 14 ounces (.397kgs), with batteries.
Case: Extruded aluminum body with nickel
plated aluminum end caps (gasket sealed).
Display: 1/4 VGA AMOLED color display (320 x
240 pixels). Viewable area 1.7 x 2.27 in (43.2 x
57.6 mm). 16 color pallete, multiple color options, and variable brightness.
Screen Refresh Rate: Selectable 60 or 120Hz.
Display Views: Flaw Detector: Full wave, +/- Rectified, or RF. Thickness Gauge: Digits, +/- Rectified, RF, or B-Scan.
Timing: Precision 25MHz TCXO with single shot
100 MHz 8 bit ultra low power digitizer.
Measurement Gates: Two independent gates
(Flaw), and three gates (thickness). Start & width
adjustable over full range. Amplitude 5-95%, 1%
steps. Positive or negative triggering for each
gate with audible and visual alarms.
Operating Temperature: 14 to 140F (-10C to
60C).
Environmental: Meets IP65 requirements.
Calibration
Automatic Calibration: Longitudinal (straight),
or Shear (angle).
Probe Types: Single Contact, Dual, Delay, and
Angle .
Units: English (in), Metric (mm), or Time (µs).
Velocity: 0.0100 to .6300 in/µs (256–16,000 m/s).
Damping: 50, 75, 100, 300, 600, & 1500 ohms.
Frequency Bands: DFX-7 & 7+: Broadband 1.8 19 MHz (-3dB). DFX-7+: Three narrow bands at
2MHz, 5MHz, 10MHz.
Amplifier Linearity: +/- 1 dB.
Coating Only Mode (CT) - (Coating Thickness)
Measures from 0.0005 to 0.100 inches (0.0127 to
2.54 millimeters). Range will vary +/- depending
on the coating.
Amplitude Measurement: 0 to 100% FSH, with
1% resolution.
One and two point calibration option for material & coating, or selection of basic material types.
Delay: 0 - 999in (25,375mm) at steel velocity.
Auto probe zero, recognition and temperature
compensation.
Horizontal Linearity: +/- 0.4% FSW.
Vertical Linearity: +/- 1% FSH.
Flaw Detector Features
TRIG: Trigonometric display of beam path,
depth, surface distance, and curved surface correction. Used with angle beam transducers.
DAC: Up to 8 points may be entered and used
to digitally draw a DAC curve. Reference -2, -6,
-10, (-6/-12), (-6/-14), (-2/-6/-10) dB. Amplitude
displayed in %DAC, dB, or %FSH.
AWS: Automatic defect sizing in accordance with
AWS D1.1 structural welding code.
AVG/DGS: Automatic defect sizing using probe
data. Stores up to 64 custom setups.
TCG: Time corrected gain. 50 dB dynamic range,
20 dB per microsecond, up to 8 points for curve
definition.
Measurement Mode: Pulse-Echo (P-E) measures
from 0.025 in to 100 ft. (0.63mm to 3048 cm).
Test Range: 0 to 0.280in (7.11mm) minimum, to
1200in (30,480mm) maximum at steel velocity.
Continuously variable.
Auto-Cal: Provides automatic calibration with
two reference points.
Zero Offset (Probe Zero): 0–999.999 µs.
Display Freeze: Hold current waveform on
screen.
Material Velocity Table: Contains longitudinal
and shear velocities for a variety of material
types.
Pulser
Pulser Type: Two adjustable square wave pulsers
and receivers.
P.R.F.: 8 to 333Hz in selectable steps (8, 16, 32, 66,
125, 250, 333Hz).
Pulser Voltage: 200 volt peak amplitude, rise/fall
time < 10ns into 50ohm.
Pulse Width: 40 to 400 ns. Selectable step options 40, 80 & 400 ns (labeled spike, thin & wide).
& Thickness Gauge
Echo-Echo Verify (E-EV) - (Thru Paint & Coatings)
measures from 0.050 to 1.0 inches (1.27 to 25.4
millimeters). Will vary based on coating.
Detection Modes: Zero Crossing, Flank and Peak.
Peak Memory: Captures peak signal amplitude.
Thickness Gauge Features
Measurement Modes (Dual Element):
Pulse-Echo Mode (P-E) - (Pit & Flaw Detection)
measures from 0.025 in to 100 ft. (0.63mm to
3048 cm).
Pulse-Echo Coating Mode (PECT) - (Material,
Coating, Pit & Flaw Detection): Material: 0.025 in
to 100 ft. (0.63mm to 3048 cm). Coating: 0.001 to
0.100 inches (0.01 to 2.54 millimeters).
Pulse-Echo Temp Comp Mode (PETP) - (Pit &
Flaw Detection) Auto temperature compensation
-measures from 0.025 in� to 100 ft. (0.63 mm to
3048 cm).
High speed scan up to 50 readings per second.
Audible alarm with hi/lo limits.
Built-in differential mode for QC inspections.
64 custom setup configurations.
Memory
Log Formats: Grid (Alpha Numeric), or Sequential (Auto Identifier).
Graphics On: 8,000 readings, A/B Scan image, &
all gauge settings for every reading.
Graphics Off: 210,000 readings (coating, material, min & max. (Thickness gauge only).
Custom Setups: 64 user configurations.
Power Source
Battery: Three 1.5V alkaline, 1.2V AA Nicad cells,
1.2V AA NI-MH, or other other equivalent power
source. Battery life (continuous use): Alkaline (12
hrs), Nicad (5hrs), and NI-MH (12hrs), with default
settings.
Connections
Output: RS232 serial interface. PC software &
USB converter cable included.
Transducer Connectors: Two LEMO 00 connectors.
Certification
Thickness Gauge: Factory calibration traceable
to NIST & MIL-STD-45662A.
Flaw Detector: EN12668-1 compliant.
Warranty
2 year limited
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
DFX Flaw Detector Series
Isn’t performance what you need?
The DFX series ultrasonic flaw detectors are full
featured digital scopes designed to handle the
simplest to the most difficult applications.
Whether the application requires high penetration for materials that are difficult to measure, or
high resolution for precision aerospace parts,
the DFX series flaw detectors are equipped with
the necessary features to do the job.
▶
Transflective Color TFT Display.
▶ Broad & Narrow Band Amplifier.
▶ Square Wave Pulser (Active EdgeTM).
▶ Extruded Aluminum Case(IP65).
▶ USB / RS232 / Video / Analog Outputs.
▶
Trig Functions.
▶
Curved Surface Correction.
▶
DAC/TCG/AWS/DGS (Defect Sizing).
▶
Automatic Calibration.
▶ Long Battery Life (Li-Ion Pack).
▶
Water Path Correction (638 only).
▶
Fast Setup Screen Facility.
▶
Alphanumeric Text.
▶
Help Facility.
DFX series can go where
you go, to do the work you
do, saving you time and
money, making your
inspections fast and
accurate.
S O U N D
S O L UT I O N S
D F X 6 1 5 / 6 2 5 / 6 3 5 / 6 3 8 S P E C I F I C AT I O N S
Physical
Size: 9.25W x 7.13H x 4.0D in
(235W x 181H x 102D mm).
Weight: 7.5 lbs. (3,4 Kgs) with Li-Ion cells.
Case: Extruded Aluminum.
Display: Transflective TFT Color.
Display area: 4.39in x 3.29in (111.4mm x
83.5mm) 320 x 240 pixels.
A-Scan area: 255 x 200 pixels (315 x 200 expanded), 8 color options and variable brightness.
Temperature:
Operating –10° to +55°C or 14° to 131°F
–20° to +70°C or –4° to 158°F
(survivable).
Storage –40° to +75°C or –40° to 167°F
Environmental: Meets IP65 requirements.
Specifications
Units: English (in), Metric (mm), or Time (μs).
T-Min - Holds minimum thickness in depth
mode.
System Linearity: Vertical = 1% Full Screen
Height (FSH) Amplifier Accuracy ±0.1%dB. Horizontal ±0.4% Full Screen Width (FSW).
Pulser Voltage: 615 & 625 200 volt peak amplitude, rise/fall time < 10ns into 50ohm. 635 &
638 100V–350V (450V 638 ) square wave pulser.
Pulse width from spike to 2000ns duration—rise/
fall times < 5ns into 50 ohms.
Pulser Width: 615 fixed at 100ns. 625 30-250ns
linked to filter band. 635 & 638 Adjustable in 2%
of nominal width, minimum 1ns maximum 40ns.
ActiveEdge: Unique active pulse control for
enhanced near surface resolution and signal
response. Replaces traditional damping control.
P.R.F.: 615 & 625 Selectable 35 to 1000Hz
(635 & 638 5000Hz), 5Hz steps.
Screen Update Rate: 50 or 60Hz.
Probe Zero: 0–999.999μs.
Rectification: Full wave, positive or negative half
wave and unrectified RF.
Velocity: 615 & 625 0.0393–0.3937in/μs
(1000–9999m/s). 635 & 638 0.0100in/μs
(256–16000m/s).
Delay: 615 & 625 0–400 in (10,000mm) 635 &
638 0–800in (20,000mm) at steel velocity in 0.02
steps (0.05mm).
Test Range: 615 & 625 0–0.2in (5mm) up to
0–400in (10,000mm) at steel velocity. Variable
in sequence, 0.4 in or 0.04 in (10mm or 1mm).
635 & 638 0–0.05 in (1 mm) up to 0–800 in
(20,000mm) at steel velocity. Variable in 1, 2, 5
sequence or continuously in 0.05 in (1mm) increments. Also from 1 to 5000 (μs).
Gain: 0 to 110dB. Adjustable in 0.5, 2, 6, 14 and
20dB steps.
Test Modes: Pulse-echo and transmit/ receive.
Gates: 615 & 625 Start & Width adjustable over
full range. Amplitude 0–100%, 0.5% steps. Visual
& audible alarms. Single gate positive trigger,
and two gates positive and negative triggering.
Gate 2 has selectable 0.6 second delay on alarm.
635 & 638 Two fully independent gates with
positive and negative triggering for each gate.
Gate Expansion: 635 & 638 Expands range to
width of Gate 1.
Gate Monitor Delay: 635 & 638 Selectable
0.6 sec delay on gate 2 negative monitor.
Measurement Modes:
Signal Monitor - 635 & 638. Depth - Depth and
amplitude of signal in gate.
Frequency Bands: 615 4Broadband 1–10 MHz
(-6dB). 625 4 Narrow Bands centered at 1MHz,
2MHz, 5MHz, & broadband 1.5–15MHz. 635 &
638 6 narrow bands centered at 0.5, 1, 2.25, 5, 10
& 15 MHz. Broad band at 2 to 22 MHz (-6dB) and
1 to 35 MHz (-20dB).
Vertical Linearity: 1% full screen height. amplifier Linearity: +/- 0.1 dB. Horizontal Linearity:
+/- 0.4% full screen width (FSW).
Reject: 615 & 625 50% suppressive reject. LED
warning when selected. 635 & 638 80% linear
reject.
Memory
Thickness Logging: Storage for 8000 readings
stored in Block/Location/Number coding or
alpha-numeric pre-programmed work sheets.
Transferable to Excel using optional PC software.
Panel Memory: 100 storage locations for calibration settings.
DAC: Up to 10 points may be entered and used
to digitally draw a DAC curve. Reference -2, -6,
-10, -12, -14 dB curves can be selected for JIS,
ASME and EN1714 codes.
AWS: Automatic defect sizing in accordance with
AWS D1.1 Structural Welding Code.
API: Automatic defect sizing in accordance with
API 5UE.
AVG/DGS: Automatic defect sizing using probe
data. 10 probe data sets can be stored.
TCG: 625, 635 & 638 Time corrected gain. 40 dB
dynamic range, 30 dB per microsecond, up to 10
points for curve definition.
Auto-Cal: Provides Automatic calibration with
two echoes.
Reference Waveform: Recalled waveform can be
shown in a different color to live waveform for
direct comparision.
Display Freeze: Hold current waveform on
screen.
Peak Memory: For echodynamic pattern determination.
Online Help: Instant operator guidance on
operation accessed from direct key.
Language Support: Six user selectable languages from: English, German, French, Spanish,
Dutch, Italian, Russian, Polish, Czech, Finnish &
Hungarian. Others available on request.
Power Source
Battery: Lithium Ion battery pack 14.4V,
5.0 Amp hrs. Minimum 11 hours use, typical
15 hours, indication of battery charge. Recharge
time 4 hours.
Charger: 100–240 VAC, 50–60Hz.
Connections
USB: For connection to PC, keyboard and printer.
Outputs: Serial Interface, composite video (NTSC
& PAL), analog output for amplitude and distance
updated at PRF rate. Transmitter sync output.
Transducer Connectors: available with BNC or
LEMO 1 connectors (factory option).
Additional 638 Features
A-Scan Memory: 800 waveforms.
Interface trigger: Interface gate locks to surface
echo and eliminates water path variation.
Features
High Power Pulser: 450 volt boost.
Gate to Gate - 625 Echo-Echo distance, manual
gate 2 position. 635 & 638 Independent gates.
Wave Smoothing: Produces a smooth
signal envelope.
Warranty & Certification
Trig - Trigonometric display of beam path, depth
and surface distance. Calculation of skip depth
and curve surface compensation, X-offset for
transducer.
AGC: Automatic Gain Control
sets selected echo
�
to a user defined level (10–90%).
Echo Echo - Echo-Echo distance, automatic gate
2 position.
2 year limited / EN12668-1 compliant.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
MINI-MAX
Bolt Tension Monitor
THE
Ultrasonically measures the elongation
produced by tightening a threaded
fastener.
▶ The FIRST cost-effective ultrasonic
solution available on the market.
▶ EFFECTIVELY monitor your bolts
during periodic shutdowns over
the service life of the fastener.
▶ VISUALLY compare the unloaded
to the loaded waveform.
▶ MEASUREMENT QUANTITIES
Time (nanoseconds), Elongation,
Load, Stress, and %Strain.
▶ DISPLAY OPTIONS — RF, Rectified,
Large Digits with Limits Bar.
▶ DISPLAY RESOLUTION
1/8 inch VGA 240 x 160 pixels.
▶ STORES 8000 readings and
waveforms in multiple groups.
▶ BUILT-IN linear regression or vector
for optimizing load measurements.
▶ AUTO SET feature automatically opti-
mizes detection and adjusts display.
▶ HI/LO ALARM tolerance limits work
in conjunction with the data port and
external pump shut-off device.
S O U N D
S O L UT I O N S
M I N I - M A X S P E C I F I C AT I O N S
Physical
Measuring
Transducer
Weight:
13.5 ounces (with batteries).
Range:
Size:
Width (2.5 in/63.5 mm)
Depth (1.24 in/31.5 mm)
Quantities:
Transducer types:
Single element (1 MHz to 10 MHz & 1/8 to
1inch diameters). Magnetic & Non-Magnetic options.
-14˚ to 140˚F (-10˚ to 60˚C).
Keyboard:
Membrane switch with twelve tactile keys.
Case:
Extruded aluminum body with nickel
Data Output:
Bi-directional RS232 serial port; Windows®
PC interface software.
Display:
1/8in VGA grayscale display (240 x 160
pixels); viewable area 2.4 x 1.8in (62 x
45.7mm); EL backlit (on/off/auto invert).
From 1 to 96 inches (25.4 to 244 cm).
Time - Nanoseconds.
Elongation - Change in length (inches/millimeters).
Load - Force load applied (pounds KIP or
megapascals MPa).
Stress - Force for unit area stress applied
(inches per inch or millimeters per millimeter).
Resolution:
Features
+/- 0.00001 inch (0.0001 mm).
Velocity Range:
0.0492 to .3937 inches/microsecond (in/µs)
(1250 to 9,999 meters/sec).
Measurement Modes:
Pulse-Echo (flaws, pits).
Pulse-Echo w/Gate (fine adjust).
Select bolt material types from a preset or
custom list.
Units:
Pulser:
Square wave pulser with adjustable pulse
width (spike, thin, wide).
English & Metric / Farenheit & Centigrade.
Transducer
Transducer Types:
applications.
& Thickness Gauge
Custom transducers available for special
applications.
Temperature probe for automatic
temperature compensation.
Timing:
10 bit 250 MHz digitizer.
“00” LEMO connectors. Standard 10 foot
cable.
%Strain - Ratio of elongation to effective
length.
Fixed, Single, and Two-point zero calibration options.
Receiver:
Manual or AGC gain control with 40dB
range.
Glue-on transducers available for short
bolts with minimal elongations to eliminate
transducer placement errors.
Display
A-Scan: Rectified +/- (half wave
view), or RF (full waveform view).
Large Digits: Display and toggle between
nanoseconds, elongation, load, stress, and
strain; Digit Height: 0.400 inch (10mm).
Setups:
64 custom user defined setups; Factory setups can also be edited by the user.
Gate:
Gate used to fine adjust where the detection point occurs.
Alarm Limits:
Set Hi and Lo tolerances with audible
beeper, viewable scan bar, and visual LEDs.
Auto Set:
Locates the detection signal, optimizes
the gain setting, and adjusts the overall
display to show the waveform and detection point automatically.
Field Calibration:
Vector & linear regression.
Certification
Limits Bar (alarm limits): Set Hi & Lo alarm
limits for displaying an acceptable tolerance range.
Repeatability Bar Graph: Bar graph indicates stability of measurement.
2 year limited
Warranty
Data Logger
Total of 8,000 bolts in multiple bolt groups.
Stores both waveform views, nanoseconds,
elongation, load, stress, strain and all gauge
settings for each reading.
Memory:
� ram.
16 megabit non-volatile
MADE IN THE USA
Distributed By:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
MMX-6 Series
The
Versatility & Convenience
The MMX Series has arrived! These gauges are the answer to
both versatility and convenience in every way! The MMX series
defines versatility by combining features like: Fast Scan, Alarm
(audible/visual), and data logging, along with multi-mode for
reading through and eliminating the thickness
of painted or coated materials. The MMX demonstrates
convenience by making all these features available to the
user with just the touch of a button.
Conveniently toggle between pulse-echo mode
(detect flaws & pits), and echo-echo mode
(eliminate paint & coating thickness), to cover all
your inspection requirements. No need
to remove or allow for errors due to paint
and coatings. The MMX gauges use a highly
damped dual element style transducer for both
modes, eliminating the need to switch between
transducer types.
The MMX gauges are packaged in an all aluminum sealed case, making them rugged
and resistant to the working environment—Dakota’s trademark.
5 Year Limited Warranty
S O U N D
S O L UT I O N S
M M X S E R I E S T H I C K N E S S G AU G E S
DAKOTA ULTRASONICS’ has succeeded in adding the final touches to the rugged MX line with the multi-mode MMX series. The
MMX-6 and MMX-6DL have not only been combined with all the durability and features of the MX series gauges, but have also
been equipped with the ability to measure through painted or coated materials and eliminate the thickness of the paint or coating. Our 5 year limited warranty indicates how we feel about the reliability and durability of the MMX Series.
APPLICATIONS: Corrosion & Pitting • Tube & Pipe • Tanks • Boilers • Glass • Variety of Applications
S P E C I F I C A T I O N S
Physical
Display
Measuring
Weight:
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for
use in poor light conditions.
Range:
10 ounces (with batteries).
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
Backlight is selectable on/off/auto (illuminates only when taking a measurement).
Pulse-Echo Mode (Pit & Flaw Detection):
measures from 0.025 to 19.999 inches (0.63
to 500 millimeters).
Echo-Echo Mode (Through Paint & Coatings): measures from 0.1 to 1.0 inches (2.54
to 25.4 mm).
-20 to 120 F (-30 to 50 C).
Measurements displayed in inches, inches/
microsecond, millimeters, and meters/
second.
Case:
Bar graph indicates stability of reading.
Extruded aluminum body with nickel
Internal Data Logger
(MMX-6 DL only)
Switch to select English or Metric units.
Keypad
Numeric Data Logging (10 files of 100 readings per file, total 1000 readings.
Resolution:
OBST indicates no reading.
Velocity Range:
Nine tactile-feedback keys.
Features
Transducer
Multi-Mode:
0.0492 to .3937 inches./µs.
( 1250 to 10,000 meters/second).
Dual-element (transmit and receive).
Toggle between Pit & Flaw Detection
(Pulse Echo Mode), and Through Paint
& Coatings (Echo-Echo Mode) with the
single press of a button.
Sealed membrane that is resistant to both
water and petroleum products.
1 to 10 MHz frequency range.
Special high-damped transducers
available for Through Paint & Coating measurements.
Locking quick disconnect LEMO connectors.
4 foot cable.
Custom transducers available for special
applications.
Power Source
Two 1.5V alkaline or
1.2V NiCad AA cells.
Alarm Mode:
Enter a minimum acceptable thickness
value. If measurement falls below mini mum, red LED will illuminate and sound
beeper. If measurement is above minimum
value, green LED will illuminate.
Data Output:
RS232 serial interface. PC software & USB
converter cable included.
Extended range (ER) (Increases Echo-Echo
Range): measures from 0.125 to 4.0 inches
(3 to 100 mm).
0.001 inch (0.01 millimeter).
Built in:
Stainless steel reference disk for probe
zeroing.
Speed:
Standard - 4 per second.
Scan - 16 per second (min. capture).
Single and two point calibration option
included.
Certification
Warranty
5 year limited.
Typically operates for 60 hours on alkaline
and 15 hours on NiCad.
Display flashes when battery is low. Unit
turns off automatically when battery is too
low to operate reliably. ckness Gauge
�
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
MMX-7
Multi-Mode Thickness
Gauge with B-Scan
▶ Powered by a 20MHz platform with
ultra low power 10 bit digitizer.
▶ 1/8” VGA grayscale display (240 x 160
pixels). Screen Refresh rate of 25 Hz.
▶ Measure modes:
(P-E) pulse-echo (flaws
& pits) and (E-E) echo-echo (thru-paint).
▶ Adjustable gain option; high, med,
or low in (P-E) mode, or automatic gain
control (AGC) in (E-E) mode.
▶ Display veiws: Large Digits or B-Scan
(cross section).
▶ Store up to 64 custom setups.
Selection of factory setups included.
▶ High speed scan: 32 readings per
second.
▶ Alarm feature: Hi and Lo limit options.
▶ Data Storage: 12,000 page capacity.
▶ Windows® PC interface software.
▶ Multiple language support.
S O U N D
S O L UT I O N S
M M X - 7 S P E C I F I C AT I O N S
Physical
Power Source
Features:
Weight:
Setups:
and 10 hours on NiCad (charger not
included).
64 custom user-definable setups; Factory
setups can also be edited by the user.
Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).
-14˚ to 140˚F (-10˚ to 60˚C).
Keyboard:
Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Data Output:
Display:
1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm);
EL backlit (on/off/auto invert).
Measurement Modes:
Echo-Echo (thru-paint).
Measuring
Single gate in pulse-echo mode, or single
gate with holdoff in echo-echo mode;
Adjustable threshold.
Range:
Selectable Transducers:
Pulse-Echo Mode: (Pit & Flaw Detection)
measures from 0.025 9.999 inches (0.63 to
254 millimeters).
Selectable transducer types with built-in
dual path error correction for improved
linearity.
Echo-Echo Mode: (Thru Paint & Coatings)
measures from 0.050 to 4.0 inches (1.27 to
102 millimeters). Range will vary +/- depending on the thickness of coating.
Alarm Mode:
beeper and visual LEDs.
Flaw Prove Up: Basic mode using angle
beam transducers.
Takes 32 readings per second and displays
the minimum reading found when the
transducer is removed.
Resolution: +/- .001 inches (0.01 mm).
Velocity Range:
.0492 to .3936 inches/ms
Single and Two point calibration option, or
selection of basic material types.
Pulser:
Receiver:
range, depending on mode selected.
Transducer Types:
Timing:
20 MHz with ultra low power 10 bit digitizer.
& Thickness Gauge
Warranty
2 year limited
Locking quick disconnect LEMO “00” connectors.
Custom transducers and cable lengths
available for special applications.
Bar Graph: Indicates stability of measurement.
Single Element (1 to 10 MHz) - converter
cable required.
Display Views:
Scan Bar: Thickness 6 readings per second;
Viewable in B-Scan and Large Digit views.
Certification
B-Scan: Cross section view; display speed
of 15 secs per screen.
Fast-Scan Mode:
Transducer
Display
Large Digits: Standard thickness view;
Digit Height: 0.400 in (10mm).
Gates:
Digits View
B-Scan View
Memory
Data Structure:
Cell contents:
12,000 readings, B Scan image & gauge settings for every reading.
� inaccessible locaOBSTRUCT to indicate
tions.
Memory: 16 megabit non-volatile ram.
MADE IN THE USA
Distributed By:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
MVX
A/B
A/BScan
ScanUltrasonic
Ultrasonic
Thickness
ThicknessGauge
Gauge
▶ Powered by a 20MHz platform with
ultra low power 10 bit digitizer.
▶ 1/8” VGA grayscale display (240 x 160
pixels). Screen Refresh rate of 25 Hz.
▶ Manual or AGC gain option, depending
on measure mode selected, 40 dB gain
control.
▶ Display veiws: RF, +/- Rectified, B-Scan
(cross section), or Large Digits.
▶ Two independent gates with shared
threshold.
▶ Measure modes: (P-E) pulse-echo (flaws
& pits), (P-E GT) pulse-echo (flaws & pits
w/blanking gate & treshold), and (E-E)
echo-echo (thru-paint).
▶ Data Storage: 12,000 page capacity
(each page contains waveform,
measurement, and all gauge settings).
▶ Windows® PC interface software.
S O U N D
S O L UT I O N S
M V X S P E C I F I C AT I O N S
Physical
Power Source
Memory
Weight:
Data Structure:
included).
Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).
-14˚ to 140˚F (-10˚ to 60˚C).
Keyboard:
Case:
Data Output:
Display:
1/8in VGA grayscale display (240 x 160 pixels); viewable area 2.4 x 1.8in (62 x 5.7mm);
EL backlit (on/off/auto invert).
Measurement Modes:
Echo-Echo (thru-paint).
Pulser:
Receiver:
Timing:
20 MHz with ultra low power 10 bit digitizer.
12,000 readings , A or B Scan image, &
gauge settings for every reading.
Measuring
Range:
Memory:
Pulse-Echo Mode: (Pit & Flaw Detection)
measures from 0.025 9.999 inches (0.63 to
254 millimeters).
Features:
Echo-Echo Mode: (Thru Paint & Coatings)
measures from 0.050 to 4.0 inches (1.27 to
102 millimeters). Range will vary +/- depending on the thickness of coating.
Setups:
Flaw Prove Up: Basic mode using angle
beam transducers.
Single gate in pulse-echo mode, or single
gate with holdoff in echo-echo mode;
Adjustable threshold.
Resolution: +/- .001 inches (0.01 mm).
Velocity Range:
.0492 to .3936 inches/ms
Single and Two point calibration option, or
Transducer
64 custom user-definable setups; Factory
setups can also be edited by the user.
Gates:
dual path error correction for improved
linearity.
Alarm Mode:
Fast-Scan Mode:
Transducer Types:
Single Element (1 to 10 MHz) - converter
cable required.
Locking quick disconnect LEMO “00” connectors.
Display
Display Views:
A-Scan: Rectified +/- (flaw view) RF (full
waveform view).
Cell contents:
transducer is removed.
Certification
Warranty
2 year limited
B-Scan: Cross section view; display speed
of 15 secs per screen.
Large Digits: Standard thickness view;
Digit Height: 0.400 in (10mm).
Scan Bar: Thickness 6 readings per second;
Viewable in B-Scan and Large Digit views.
Bar Graph: Indicates stability of measurement.
�
& Thickness Gauge
MADE IN THE USA
Distributed By:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
MX
Series
Fixed
Velocity
Thickness
Gauges
The MX-1 and MX-2 are fixed
velocity gauges making them
affordable precision tools that
require no special training to
operate.
The MX-1 will hold a single
velocity, making it the perfect
choice where one material is
being tested day after day.
With the preset velocity in
the gauge, you simply turn
on the gauge and you are
ready to work. The velocity
is set in the MX-1 with a
simple software program
that is supplied
with the unit.
S O U N D
The MX-2 is ideal for the
person that tests a few different
materials regularly. The MX-2 contains 8 velocities of common
materials and 2 velocities that
the user can set using a simple
software program.
The MX-1 and MX-2 are
packaged in all metal cases,
sealed with gaskets to protect
them from harsh working environments. These gauges can go
where you go, to do the work you
do, saving you time and money,
making fast accurate measurements.
Dakota Ultrasonics offers quality
gauges that are reliable, innovative and competitively priced - all
backed by the longest warranty in
the business—5 full years.
S O L UT I O N S
M X- 1 & M X- 2 T H I C K N E S S G AU G E S
DAKOTA ULTRASONICS rugged thickness gauge family has been designed and built to satisfy
the roughest industry conditions. The features offered in the MX Series allow the user to select a
quality tool that will meet or exceed their specific application needs. Our 5 year limited warranty
indicates how we feel about the reliability and durability of the MX Series.
Physical
Power Source
Measuring
Weight:
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
Typically operates for
80 hours on alkaline and
20 hours on NiCad.
-20 to 120F (-30 to 50C).
Display flashes when battery is
low. Unit turns off automatically
when battery is too low to
operate reliably.
Case:
Extruded aluminum body
with nickel-plated aluminum
end caps (gasket sealed).
Keypad
Sealed membrane that is
resistant to both water and
petroleum products.
Four or five tactile-feedback
keys.
Transducer
Dual-element (transmit and
receive).
LEMO connectors.
4 foot cable.
Custom transducers available
for special applications.& Thickness
Gauge
Display
Multi-function 4.5 digit liquid
crystal display with 0.500 inch
numerals, backlit for use in
poor light conditions.
Range:
Measures from 0.025 to 19.999
inches (0.63 to 500 millimeters).
Range dependent on material
and transducer type.
Units:
English & Metric
Resolution:
0.001 inches (0.01 millimeters)
Velocity Range:
0.0492 to .5511 in/μs.
(1250 to 14,000 m/sec)
Four readings per second for
single point measurements.
Backlight is selectable on/off/auto
(illuminates only when taking a
measurement).
Velocity Settings:
The MX-1 has 1 custom
velocity setting.
Bar graph indicates stability
of reading.
The MX-2 has 8 factory presets
and 2 programmable custom
velocity options. The preset
velocities are as follows:
Computer Interface
RS232 serial interface. PC software
Certification
Factory calibration traceable to NIST
& MIL-STD-45662A.
Warranty
5 year limited.
1. Steel 4340
.233
2. Stainless Steel 303 .223
3. Aluminum 2024 .251
4. Cast Iron .179
5. Plexiglass .106
6. PVC .094
7. Polystyrene .092
8. Polyurethane .070
9. Custom
10. Custom
�
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The
Standard
Has Been
Set!
The
MX Series
from
DAKOTA
ULTRASONICS
PACKAGING All Metal Case.
The units are sealed with gaskets to protect
them from harsh working environments.
SIZE 2.5”W x 4.5”H x 1.2”D. The units are small and
portable and will operate on 2 AA batteries for 80 hours.
Very compact and convenient to transport to any job.
FEATURES The MX Series offers the features you have
requested; Differential Mode, High Speed Scan Mode,
Alarm Mode and On-Board Data Logging.
WARRANTY All gauges are covered by a 5 year
limited warranty.
SUPPORT Dakota excels in in this area. Our
Engineering and technical staff, combined with a
knowledgable and friendly sales staff, are always here
to help out.
AS YOU CAN SEE, the standard has been set with
the MX SERIES. Please give us a call to discuss your
applications.
S O U N D
S O L UT I O N S
M X S E R I E S T H I C K N E S S G AU G E S
DAKOTA ULTRASONICS rugged thickness gauge family has been designed and built to satisfy
the roughest industry conditions. The features offered in the MX Series allow the user to select a
quality tool that will meet or exceed their specific application needs. Our 5 year limited warranty
indicates how we feel about the reliability and durability of the MX Series.
Physical
Weight:
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
-20 to 120F (-30 to 50C).
Case:
Keypad
petroleum products.
Six or nine tactile-feedback keys.
Transducer
receive).
LEMO connectors.
4 foot cable.
Gauge
Power Source
Measuring
20 hours on NiCad.
operate reliably.
Display
measurement).
of reading.
Software
Comes complete with cable and
PC software (MX-5 DL only).
Memory
Numeric data storage, 10 files of
100 readings per file, for 1000 readings (MX-5 DL only).
Certification
& MIL-STD-45662A.
Warranty
5 year limited.
Range:
Units:
English & Metric
Resolution:
Velocity Range:
0.0492 to .5511 in/μs.
(1250 to 14,000 m/sec)
single point measurements, or
16 per second in Scan Mode captures the minimum thickness.
Features (MX-5, MX-5-DL)
Differential Mode:
Enter acceptable thickness value,
unit will display+/- the difference
from the value entered.
Alarm Mode:
Enter a minimum acceptable
thickness value. If measurement
falls below minimum, red LED will
illuminate and sound beeper. If
measurement is above minmum
value, green LED will illuminate.
Data Output:
�
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The
PR-8V
SONIC TESTER
The physical size, weight,
and display resolution are
just a few of the benefits
of the PR-8V
▶ The time-based
B-Scan feature of
the PR-8V displays a cross
section of the opposite surface,
allowing engine builders the ability to
see the contour of the back surface in cylinders
while scanning.
▶ Use the Multi-Mode (Echo-Echo mode) feature to measure
chassis tubing with or without paint and coatings. Built-in
automatic gain control.
▶ Selectable low, medium, and high gain settings offer
the inspector the additional punch power for materials
that are hard to penetrate.
▶ The variety of calibration options is just one more
example of PR-8V’s versatility.
▶ Store up to 64 custom setups. Factory setups
available for common applications.
▶ The internal Data Logger of the PR-8V has been
customized for both the engine builder and the chassis inspector. Selectable cylinder mapping or general
alpha numeric file storage will satisfy your reporting
needs.
▶ Built-in transducer types offer increased linearity
between transducers.
▶ The Fast Scan feature provides a better representation during the scanning process, by making 32 measurements per second. Remove the transducer from the
test material and display the thinnest measurement found.
▶ Use the visual and audible alarm to set Hi and Lo limits
to signal the inspector when the measurements are out of
tolerance.
▶ The PR-8V also comes complete with our Windows®
PC software for transferring data to- and from a PC, and
viewing B-Scans, Cylinder Maps, and general measurements.
S O U N D
S O L UT I O N S
P R - 8 V S P E C I F I C AT I O N S
Physical
Size:
Depth (1.24 in/31.5 mm)
Weight:
Keyboard:
Membrane switch pad with twelve tactile
keys.
14 to 140F (-10C to 60C)
Case:
Extruded aluminum body with nickelplated aluminum end caps (gasket
sealed).
Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.
Display(Two Options): 1/8in VGA grayscale display (240 x 160 pixels). Viewable
area 2.4 x 1.8in (62 x 45.7mm). EL backlit
(on/off/auto). 25 Hz screen refresh rate.
Measurement Modes:
Pulse-Echo - (flaws, pits, corrosion).
Power Source
Three 1.5V alkaline or 1.2V NiCad AA
cells.
12,000 readings and waveforms (alpha
numeric storage).
Typically operates for 35 hours on
alkaline and 10 hours on NiCad (charger
not included).
Measuring
Range:
Pulse-Echo Mode:
Standard operating mode for engines
and automotive parts without painted
surfaces (pits or flaws detection). Measures 0.025in. to 9.999in. (0.63mm to
254mm).
Echo-Echo Mode:
Thru-paint & coating—chassis and
general body inspections. Measures from
0.050in. to 4in. (1.27mm to 102mm).
Resolution:
+/- .001 in. (0.01 mm).
Velocity Range:
.0492 to .3936 inches/µs.
1250 to 9999 meters/sec.
Echo-Echo - (thru-paint - chassis).
One and Two Point calibration option, or
Pulser:
Square wave pulser.
Units:
English & Metric
Receiver:
Selectable low, medium, or high gain in
Pulse-Echo mode or AGC gain control in
Echo-Echo mode.
Timing:
20 MHz ultra low power 10 bit digitizer.
Warranty
2 year limited.
Certification
Factory calibration traceable to NIST &
MIL-STD-45662A.
auge
Memory
Display
Display Views:
Memory:
Transducer
Transducer Types:
Locking quick disconnect “00” LEMO
connector.
available.
Features
Setups:
64 custom user-defined setups. Factory
setups available for common applications.
dual-path error correction for improved
linearity.
Alarm Mode:
Fast Scan Mode:
transducer is removed. Display continuously updates while scanning.
Large Digits - Standard thickness view.
Digit Height: 0.400 inch (10mm).
B-Scan - Time based cross section view.
Display speed of 15 secs per screen.
Scan Bar Thickness - 6 readings per
second; Viewable in B-Scan and Large
Digit views.
Repeatability Bar Graph - Bar graph
indicates stability of reading.
Connections
Output: RS232 serial interface. PC software & USB converter cable included.
Digits View
B-Scan View
connectors.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
PR-8 SonicTester
2
The PR-82 is
the first affordable
Sonic Tester, utilizing stateof-the-art digital technology to
produce fast and accurate readings. It
requires no special training to operate.
the Scan mode, which is helpful when
measuring cylinder walls and roll cages.
Place the probe at the bottom of the
cylinder and drag it to the top, the gauge
will display the thinnest reading measured.
Unlike calipers, the PR-82 will measure
where there is access to only one side.
This makes it valuable when measuring
roll cage thickness, cylinder walls (before
and after boring) and heads during porting.
The PR-82 is a lightweight, rugged tool
that is resistant to water and oil. Other
features include a backlit LCD and a bar
graph to indicate signal stability.
The PR-82 measures in two modes. The
first mode takes a measurement at the
point you place the probe. The second is
The PR-82 can go where you go, to do
the work you do, saving you time and
money, making fast, accurate measurements.
S O U N D
The 5 year warranty indicates how we
feel about the quality of the PR-82.
S O L UT I O N S
THE PR-82 SONIC TESTER
With the PR-82, you can make accurate reliable measurements and scan a length of material for the thinnest point.
A partial list of the custom probes for racing applications:
• Chassis Tubing, Roll Cages*
3/16” 10MHz Flat Probe head
• Cast Iron Cylinder Heads*
1/4” 5MHz with 1” or 9” Wand
• Cast Iron & Aluminum Heads 1/4” 7.5MHz with 1” or 9” Wand
• Aluminum Cylinder Heads*
1/4” 10MHz with 1” or 9” Wand
• Cylinder Blocks*
1/2” 5MHz
0.60” radius
0.60” radius
0.60” radius
2.00” radius
* best performance on stated material
The PR-82 comes complete, ready to use and is protected by Dakota Ultrasonics
5 year limited warranty —a statement of its quality.
Typical automotive applications are:
• Cylinder
• Chassis Tubing
• Head Ports
• Body Panels
• Roll Cage
• Windshields
Physical
Power Source
Measuring
Weight:
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
20 hours on NiCad.
-20 to 120F (-30 to 50C).
operate reliably.
Case:
Keypad
petroleum products.
Six tactile-feedback keys.
Transducer
receive).
LEMO connectors.
4 foot cable.
Display
measurement).
of reading.
Certification
Range:
Automotive Applications:
0.050 to 1.500 inches in casted
materials.
Units:
English & Metric
Resolution:
Velocity Range:
0.0492 to .5511 in/μs.
(1250 to 14,000 m/sec)
single point measurements or 16
per second in SCAN mode.
One or Two point calibration option.
& MIL-STD-45662A.
Warranty
5 year limited.
�
Gauge
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The
The
PVX
Precision A-Scan Thickness Gauge
Highlights:
▶ Adjustable square wave pulser provides the flexibility necessary for
both high resolution and penetration requirements.
▶ Selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +/- Rectified waveform, and
Large Digits with Scan Bar.
▶ Time based B-Scan feature displays a cross section of the test
material. Displays the profile of the opposite surface of the material.
▶ Ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips
for metals and thin plastics), Pencil Delay Line (tough access
areas on thin materials), and Contact transducers (variety of
applications).
▶ Hardware AGC gain control for multiple echo and thrupaint measurement.
▶ Multiple calibration options: One-Point, Two-Point,
or selection from a Material List.
▶ 16 factory setups and 48 user-defined setups.
ser-defined setups can be edited for custom applications.
▶ PVX is equipped with an alpha-numeric data
logger to provide increased versatility for those
custom reporting needs.
▶ The High Speed Scan feature speeds up the
inspection process by taking 32 measurements
per second. Remove transducer from the test
material and display the minimum measurement scanned.
▶ Adjustable resolution settings add to the
PVX’s flexibilty.
▶ PVX comes complete with our Windows®
PC software for transferring data to and from
a PC.
▶ Auto Find feature locates the detection
point(s) and adjusts the display settings to
bring the waveform into view.
▶ Visual and audible alarm with Hi and Lo
limit settings for specific application tolerances.
S O U N D
S O L UT I O N S
P V X S P E C I F I C AT I O N S
Physical
Power Source
Memory
Size:
Depth (1.24 in/31.5 mm)
12,000 readings and waveforms (alpha
numeric storage).
Weight:
Keyboard:
Membrane switch pad with twelve tactile
keys.
14 to 140F (-10C to 60C)
Case:
Data Output:
Bi-directional RS232 serial port. Windows®
Display(Two Options): 1/8in VGA grayscale
display (240 x 160 pixels). Viewable area 2.4
x 1.8in (62 x 45.7mm). EL backlit (on/off/
auto). 25 Hz screen refresh rate.
Measurement Modes:
Pulse-Echo - (General Purpose - uncoated
materials).
Interface-Echo - (Precision - thick materials).
Echo-Echo - (Precision—Thin materials &
thru-paint).
Pulser:
Square wave pulser with adjustable pulse
Receiver:
Timing:
40 MHz ultra low power 10 bit digitizer.
Warranty
2 year limited.Thickness Gauge
included).
Memory:
Measuring
Transducer
Range:
Transducer Types:
Single Element (1 to 20 MHz).
Interface-Echo Mode: Steel .050–1.0 inch
(1.27–25.4mm); Plastics from .005 inch
(.127mm).
Echo-Echo Mode: Steel .006–.500 inch
(.152–12.7mm).
Pulse-Echo Contact:
Steel .040–10.0 inch (1–254mm); Plastics
from .010” (.254mm).
Echo-Echo Contact:
Steel thru-paint .100–3.0 inches (2.54–
76.2mm).
Resolution (selectable):
+/- .001 inch (0.01 mm).
+/- .0001 inch (0.001 mm).
Velocity Range:
.0492 to .3936 inches/µs.
1250 to 9999 meters/second.
One and Two Point calibration option, or
Units:
English & Metric
Display
Display Views:
A-Scan - Rectified +/- (half wave view) RF
(full waveform view).
B-Scan - Time based cross section view.
Display speed of 15 secs per screen.
Large Digits - Standard thickness view.
Digit Height: 0.400 inch (10mm).
Scan Bar Thickness - 6 readings per second; Viewable in B-Scan and Large Digit
views.
Repeatability Bar Graph - Bar graph indicates stability of reading.
Locking quick disconnect “00” LEMO connector.
available.
Features
Setups:
16 factory and 48 custom user-defined
setups.
Gates:
Single gate in contact mode; Single gate
with holdoff in interface-echo, echo-echo,
and plastics mode; Adjustable threshold.
Multiple Measurement Modes: Selectable
modes for use with a variety of applications.
Alarm Mode:
Fast Scan Mode:
transducer is removed. Display continuously updates while scanning.
Connections
connectors.
Certification
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The
The
PX Series
Precision Thickness Gauges
THE PX SERIES of Precision Thickness
Gauges utilize state-of -the-art digital
technology to produce fast and accurate
readings. The gauges are designed with
the user in mind. They are PACKAGED
in an all aluminum sealed case making
it resistant to the working environment.
The gauges are simple to operate and
are loaded with the FEATURES you have
requested: Alarm Mode, Differential Mode,
Internal Data-Logging and RS-232 data
output port to interface with a computer
or other data acquisition system.
The gauges have a MEASURING RANGE
from 0.0060 to 1.0000 inch, (0.15 to
25.40 mm). Using a single element delay
Line transducer, the gauges will measure
thin materials in ECHO-TO-ECHO MODE
and automatically switch to INTERFACEECHO MODE when measuring thicker
materials and plastics.
THE PX-7’S echo-to-echo mode
offers the user the ability to measure the
thickness of materials without removing
the paint or the coating.
S O U N D
S O L UT I O N S
T H E PX S E R I E S T H I C K N E S S G AU G E S
DAKOTA ULTRASONICS PX Series has arrived. The variety of features offered in the PX-7 and
PX-7DL allow the user to select a quality tool that will meet or exceed their specific application
needs. In the Echo-to-Echo Mode you have the ability to measure the thickness of materials without removing the paint or the coating. Our 5 year limited warranty indicates how we feel about
the reliability and durability of the PX SERIES.
Physical
Weight:
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
-20 to 120F (-30 to 50C).
Case:
Keypad
petroleum products.
Nine tactile-feedback keys.
Transducer
Single element with delay tip.
LEMO connectors.
4 foot cable.
for special applications.
Warranty
5 year limited.ess Gauge
Power Source
10 hours on NiCad.
operate reliably.
Display
measurement).
of reading.
Computer Interface
Certification
& MIL-STD-45662A.
Memory (PX-7 DL)
Automatic Data Logging System
1000 reading capacity, (10 files of
100 readings each).
Measuring
Range:
inches (0.15 to 25.4 millimeters).
Units:
English & Metric
Resolution:
0.0001 inches (0.001 millimeters).
Velocity Range:
0.0492 to .3937 in/μs.
(1250 to 10,000 meters/second).
Four readings per second, single
point measurement.
Single point calibration.
Features
Differential Mode:
Enter acceptable thickness value,
unit will display +/- the difference
from the value entered.
Alarm Mode:
Enter a minimum acceptable thickness value. If measurement falls
outside Hi/Lo limits, red LED will
illuminate and sounds beeper.
If measurement is between Hi/Lo
limits, green LED will illuminate.
Data Output:
RS-232 output sends data to a serial
printer, a computer or other external storage device.
OBST indicates no reading.
Complete with data acquisition
software and cables.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
The
The
UMX-2
Underwater Material &
Coating Thickness Gauge
HIGHLIGHTS:
▶
1000 ft. (300 m) depth rating.
▶
Probe types: Single Membrane
& Dual Element.
▶
Automatic: Probe recognition & Zero.
▶
Measurement modes: Pulse-Echo,
Pulse-Echo w/Coating, Echo-Echo,
Triple-Echo (TCG).
▶
Data Storage: Alpha numeric &
Sequential w/ID.
▶ Windows PC software included.
▶
3 year limited warranty.
Captures an A-Scan
waveform snapshot with
every measurement; viewable
using our Windows PC interface
software.
S O U N D
S O L UT I O N S
U M X - 2 S P E C I F I C AT I O N S
Physical
Size:
Length (9.0 in/229 mm).
Diameter (2.375 in/60.33 mm).
Weight:
1.5 lbs (0.680 kg) with 3 AA batteries.
keyboard:
Single button, magnetically coupled
switch.
-20 to 140F (-29C to 60C).
Underwater Case:
High strength transparent plastic
housing. Depth rating of 1000 feet (300
meters).
Data Output:
Bi-directional RS232 serial port, with
USB converter. Windows® PC interface
software.
Display:
1/2 in (12.7 mm) 4.5 digit LCD display.
3/8 in (9.5 mm) 6 alpha LCD display.
Both displays backlit (on/
off/auto).
LED Lighting: 8 blue leds (on/off ).
Measurement Modes:
Dual Element Probes
Pulse-Echo (P-E): Coating Off.
Pulse-Echo Coating (PECT): Coating
On.
Echo-Echo (E-E): Thru-Paint.
Single Element Probes
Triple-Echo (TCg): Thru-Paint.
Receiver:
Dual receivers - manual or AGC gain
control with 100 dB range.
Manual gain: Limited to 5 gain settings (vlow, low, med, high, vhigh (42 to
50 dB).
AGC: Automatic gain setting.
Timing:
Precision 25 MHz TCXO with single shot
100 MHz 8 bit ultra low power digitizer.
ickness Gauge
Power Source
Display
Three 1.5V alkaline or 1.2V NiCad AA
cells.
Typically operates for 50 hours on alkaline and 20 hours on NiCad (backlight
off ). 15 hours on alkaline and 8 hours
on Nicad (backlight on).
Auto power off if idle 5 min.
Battery status displayed on power up.
Measuring
Pulse-Echo Mode (P-E) - (Pit & Flaw Detection) measures from 0.025 to 19.999
Pulse-Echo Coating Mode (PECT) (Material, Coating, Pit & Flaw Detection):
Material: 0.025 to 19.999 inches (0.63 to
508 millimeters). Coating: 0.001 to 0.100
inches (0.01 to 2.54 millimeters).
Echo-Echo Mode (E-E) - (Thru Paint &
Coatings) measures from 0.100 to 4.0
inches (2.54 to 102 millimeters). Will
vary based on coating.
Triple-Echo (TCg) - 0.040 to 6.00
(1 to 152 millimeters) inches in steel.
Range will vary based on coating thickness, material type, and probe.
Resolution:
+/- 0.001 inches (0.01 mm).
Units:
English & Metric
Segmented Displays:
4.5 Digit LCD - Primary measurement
display.
6 Character LCD - Displays menu options.
Repeatability Bar graph - Bar graph
indicates stability of reading.
Data Storage
File Formats:
Grid (alpha numeric).
Sequential (auto identifier).
Programming: Storage capacity of
1 file template. Size and dimension
specified by the user.
Storage capacity: 5,000 readings, settings, and waveform graphics.
Memory:
Transducer
Auto Probe Zero: Applies to dual
element probes only.
Transducer Types
Dual Element: 1 to 10 MHz frequency
range. Custom auto recognition probes.
(flaw & pit detection).
Single Element: 1 to 10 MHz frequency
range - (General purpose).
LEMO underwater connectors.
Velocity Range:
0.0492 to 0.5510 in/us
8 fixed and 1 programmable Material
Velocities (in/us):
1. Aluminum 2024
.251
2. Steel 4340
.233
3. Stainless Steel 302
.223
4. Iron
.232
5. Cast Iron
.180
6. PVC
.094
7. Polystyrene
.092
8. Polyurethane
.070
9. Custom
User
Certification
Factory calibration traceable to
NIST & MIL-STD-45662A.
IP68 rating
Warranty
3 year limited.
Computer Interface
�
RS232 serial interface. PC software &
USB converter cable included.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
Take your MX-3 / MMX-6
underwater with you!
UMX
Underwater
Enclosure
Kit
This portable solution
offers off-shore inspectors
a very versatile system
for underwater corrosion
surveys:
UMX ENCLOSURE
▶
Clear Plexiglas construction.
▶ 300 feet depth rating.
▶
Stainless steel connectors,
latches, and control bar.
▶
Simple to install and operate.
MX-3 / MMX-6 GAUGES
▶
Aluminum extrusion
construction.
▶ Measuring range .025” –
19.999”.
▶
80 hours operation on 2 AA
batteries.
▶
Pulse-Echo (pit & flaw), and
Echo-Echo (thru-paint) mode
options.
▶ One & Two point calibration
The UMX Underwater Enclosure & MX-3/
MMX-6 Thickness Gauge Combination
S O U N D
option.
▶ High speed scan mode.
S O L UT I O N S
U M X U N D E R WAT E R E N C L O S U R E
Take your MX-3 or MMX-6 underwater with the UMX underwater enclosure. This custom designed housing provides a convenient method for off-shore inspections. The combination was
designed to inspect for corrosion in a variety of off-shore applications: ships, pipes, storage
vessels, docks, pilings and piers. The MX-3 is a pulse-echo style thickness gauge for use on noncoated materials, while the MMX-6 is equipped with an additional echo-echo feature to measure
coated materials and eliminate the coating thickness.
Physical
Transducer
Weight:
MX-3 / MMX-6: 10 ounces (with
batteries).
receive).
UMX: 2.2lbs ( 1 kg ).
Size:
Variety of standard & underwater
transducers and frequencies.
MX-3 / MMX-6: 2.5 W x 4.5 H x 1.24
D in (63.5 W x 114.3 H x 31.5 D mm).
MX-3 / MMX-6: LEMO 00 connectors.
UMX: 3.5 W x 7.5 H x 2.75 D in (63.5
W x 190.5 H x 69.85 D mm).
UMX: Underwater LEMO connectors.
-20 to 120 F (-30 to 50 C).
4 foot cable.
Case:
MX-3 / MMX-6: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
UMX: Custom formed plexiglass
with stainless steel shaft, connectors, and latches (gasket sealed).
Depth Rating: 300 ft. ( 91.44 M )
Keypad
MX-3 / MMX-6: Sealed membrane
that is resistant to both water and
petroleum products.
Four or Six tactile-feedback keys.
UMX: Sliding stainless steel shaft.
& Thickness Gauge
lengths available on request.
Power Source
Typically operates for 80 hours on
alkaline and 20 hours on NiCad.
when battery is too low to operate
reliably.
Display
crystal display with 0.500 inch numerals, backlit for use in poor light
conditions.
Measuring
Range:
Units:
English & Metric.
Resolution:
0.001 inches (0.01 millimeters).
Velocity Range:
0.0492 to .5511 in/μs.
(1250 to 14,000 m/sec).
single point measurements.
Computer Interface
Certification
& MIL-STD-45662A.
Warranty
MX-3 / MMX-6: 5 year limited.
UMX: 1 year limited.
measurement).
�
of reading.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723
DAKOTA ULTRASONICS
VX
Velocity
Gauge
The VX is a hand-held ultrasonic velocity
gauge. When measuring materials such as
casts, alloys, or plastics, the VX displays the
speed of sound (velocity) through the material;
thus giving an indication of its consistency.
The VX gauge has 2 measuring modes: The
Point-to-Point mode, which is simply
placing the probe to the material and the
gauge will display the velocity at that point.
The Scan mode allows the operator to place
the probe on the material and then move the
probe along the surface; when the probe is
lifted from the material, it will then display the
fastest velocity the gauge found on the area
covered.
The VX is packaged in an all metal case, sealed
with gaskets to protect them from harsh
working environments. This gauge can go
where you go, to do the work you do, saving
you time and money, making fast accurate
measurements.
Dakota Ultrasonics offers quality gauges that
are reliable, innovative and competitively
priced, all backed by the longest warranty in
the business—5 full years.
S O U N D
S O L UT I O N S
V X V E LO C I T Y G AU G E
DAKOTA ULTRASONICS rugged gauges have been designed and built to satisfy the roughest
industry conditions. The variety of features offered in our gauges allow the user to select a quality tool that will meet or exceed theirand specific application needs. Our 5 year limited warranty
indicates how we feel about the reliability and durability of the VX Velocity Gauge.
Physical
Weight:
Size:
2.5 W x 4.5 H x 1.24 D inches
(63.5 W x 114.3 H x 31.5 D mm).
-20 to 120F (-30 to 50C).
Case:
Keypad
petroleum products.
Six tactile-feedback keys.
Transducer
receive).
LEMO connectors.
4 foot cable.
Gauge
Power Source
20 hours on NiCad.
operate reliably.
Display
measurement).
Measuring
Range:
Units:
English & Metric
Resolution:
Velocity Range:
0.0492 to .3937 in/μs.
(1250 to 14,000 m/sec)
single point measurements and
sixteen per second in scan mode.
Single point calibration to known
thickness or velocity.
Measurements displayed in
inches/microsecond, and
meters/second.
of reading.
Certification
& MIL-STD-45662A.
Warranty
5 year limited.
MADE IN THE USA
Distributed by:
DAKOTA ULTRASONICS
Ph: (831) 431-9722
Fax: (831) 431-9723

MADE IN THE USA

Transcription

Similar documents

Case Study Electrical: Lighting Trilux

Quadco`s Forespro® delimbers are engineered with the highest

Mazak VTC 250 - Northern Oil Tool INC.

MB-LS170 - MB Crusher

EZ Ancor Hollow Door downloadable

Ecopaint RoDip_Efficiency and Quality Through Rotation

Sherardizing - Bodycote Metallurgical Coatings

QT 2000 - Edelstahl-Service

OS500 Safe

Western Montana Fish and Game Association 100 Anniversary