KIT series (영)

Transcription

KIT series (영)
Gang Tooling CNC Lathe
www.wiamachine.co.kr
to the World and to the Future
GANG TOOLING CNC LATHE
KIT Series
KIT400/450/60G
Head Office & Factory
Seoul Office
391-8 Kaumjung-Dong, Changwon, Gyeongnam, Korea
TEL : +82 55 280 9114,
FAX : +82 55 282 9680
http : //www.wia.co.kr,
E-mail : trade@wia.co.kr
10th Floor Landmark Tower 837-36, Yeoksam Dong,
Gangnam-Gu, Seoul, Korea
TEL : +82 2 2112 8451,
FAX : +82 2 2112 8400
HYUNDAI - KIA MACHINE AMERICA CORP. (New Jersey Office)
30 Murray Hill Parkway, Suite 300. East Rutherford, NJ 07073 U.S.A.
TEL : +1 201 489 2887,
FAX : +1 201 489 2723
http : //www.hyundai-kiamachine.com
E-mail : sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE AMERICA CORP. (Chicago Office)
500 Remington Rd. Ste 101, Schaumburg, IL 60173 U.S.A.
TEL : +1 847 885 8585,
FAX : +1 847 885 1613
http : //www.hyundai-kiamachine.com
E-mail : sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE AMERICA CORP. (L.A Office)
11155 Knott Ave, Suit F, Cypress, CA 90630 U.S.A
TEL : +1 714 373 5480,
FAX : +1 714 373 5485,
http : //www.hyundai-kiamachine.com
E-mail : sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE AMERICA CORP. (Argentina Office)
Moreau De Justo, Alicia 1848 piso 406 Puerto Madero - Capital Federal, Argentina
TEL : +54 11 4313 1917,
FAX : +54 11 4313 1929
http : //www.hyundai-kiamachine.com
E-mail : sales@hyundai-kiamachine.com
HYUNDAI - KIA MACHINE EUROPE GMBH. (Germany Office)
Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 (0) 69-271472-0,
FAX : +49 (0) 69-271472-719
E-mail : sales@hyundai-kia.de
HYUNDAI - KIA MACHINE EUROPE GmbH (Raunheim Service Center)
Kelsterbacher Str. 38-46 D-65479 Raunheim, Germany
TEL : +49 (0) 6142-834-0,
FAX : +49 (0) 6142-834-100
E-mail : yspark@hyundai-kia.de
HYUNDAI - KIA MACHINE SHANGHAI OFFICE
Room 501 Ocular B/D, No. 1336 Wu zhong Road, 201103 Shanghai, China
TEL : +86 21 3431 0370~3,
FAX : +86 21 3431 0376
E-mail : jgbae309@wia.co.kr
HYUNDAI - KIA MACHINE BEIJING OFFICE
Room 908 No. 38 Xiaoyun Road, Chaoyang District, Beijing, China 100027
TEL : +86 10 8453 9850~2,
FAX : +86 10 8453 9853
E-mail : ijyang7@wia.co.kr
HYUNDAI - KIA MACHINE GUANGZHOU OFFICE
Room 1305 Citic Plaza No. 233 Tianhebei Road,Guangzhou, China 510613
TEL : +86 20 8752 1595/1596,
FAX : +86 20 8752 1597
E-mail : iclee@wia.co.kr
HYUNDAI - KIA MACHINE CHENGDU OFFICE
Room 2103, Block A, Times Plaza, Zongfu Road, Chengdu, China 610016
TEL : +86 28 8665 5550,
FAX : +86 28 8665 2985
HYUNDAI - KIA MACHINE WUHAN OFFICE
Room 43-05, New World International Trade Building(Wuhan) No.568 Jianshe
Avenue, Jianghan District, Hankou, Wuhan, Hubei 430022
TEL : +86 27 5952 3255/3256,
FAX : +86 - 27 - 5952 - 3258
HYUNDAI - KIA MACHINE Qingdao OFFICE
Room 1207, Zhaoyin Building, 36 Hongkong Middle Road, Qungdao, shandong
266071, China
TEL : +86 - 532 - 8667-9333~6,
FAX : +86 - 532 - 8667-9338
HYUNDAI - KIA MACHINE INDIA OFFICE
6B, EGA Trade Centre. 809 Poonamallee High Road, Kilpauk,
Chennai-600 010, India
TEL : +91 44 4285 7112,
FAX : +91 44 4285 7116
E-mail : ucryu@wia.co.kr
KIT Series Ver.1 1,000
World Top Class Quality
HYUNDAI-KIA Machine
High Speed, High Accuracy, High Rigidity
Gang Type CNC Turning Center
KIT 400
KIT Series
KIT 450
KIT Series
KIT 60G
KIT Series
Accuracy
KIT Series
Cutting Condition
Spindle Speed
1,500 rpm
Material
AL
Nose R of diamond tool R 0.8(R 0.0315 )
Depth of cut
0.02mm (0.0008 )
Feedrate
0.03mm/rev (0.0012in/rev)
Dia. of work
30mm ( 1.1811 )
Roundness 0.5 m(0.00002 )
Cutting Condition
Material :
Brass
SP. Speed : 2,300rpm
Depth of cut :
1.5mm
(0.059 )
Feed :
0.3mm/rev
(0.0118 in/rev)
Coolant :
Use
Dia. of work :
42(1.6 )
[2 pass cut]
Roughness (0.5 m(0.00002 )
Cutting Accuracy ( m)
No. of Work (pcs)
This data is taken after full warming up operation.
KIT450
KIT400
Specification
KIT400
KIT Series
Unit:mm(in)
HYUNDAI-KIA CNC Turning Center KIT400
Ø10, 12, 16
(Ø3/8, 1/2, 5/8)
Unit:mm(in)
COOLANT TANK
DOOR INTERLOCK
WORK LIGHT
STD. TOOL KIT & BOX
LEVELING PADS & BOLTS
FOOT SWITCH 1EA
SPINDLE OVERRIDE
SPINDLE ORIENTATION
6 HYDRAULIC SOLID CHUCK
PARTS CATCHER
WORK COUNTER
TOTAL COUNTER
CHUCK OPEN/CLOSE
CONFIRMATION DEVICE
CHUCK AIR BLOW (SP. CENTER)
CHUCK AIR BLOW (UPPER CHUCK)
BARFEEDER INTERFACE
CHIP CONVEYOR (SIDE)
CHIP CONVEYOR (REAR)
CHIP WAGON
CALL LIGHT (3 COLORS)
AUTO DOOR
5 DEGREE INDEXING DEVICE
C-AXIS (0.001 DEGREE)
TRANSFORMER
SPINDLE INSIDE STOPPER
AUTO POWER OFF
U-DRILL HOLDER
U-DRILL SLEEVE
GUN COOLANT
!
Unit:mm(in)
!
!
Detail of T-Slot
!
KIT400
6 HYDRAULIC HOLLOW CHUCK
SOFT JAW 1SET
TOOL HOLDER (I.D) 1EA
TOOL HOLDER (O.D) 1EA
TOOL HOLDER (MIXED) 1EA
BORING BAR SLEEVE 1SET
DRILL SOCKET MT#1 1EA
FLOOD COOLANT
!
!
Specification
KIT450
KIT Series
Unit:mm(in)
HYUNDAI-KIA CNC Turning Center KIT450
Ø10, 12, 16
(Ø3/8, 1/2, 5/8)
Unit:mm(in)
COOLANT TANK
DOOR INTERLOCK
WORK LIGHT
STD. TOOL KIT & BOX
LEVELING PADS & BOLTS
FOOT SWITCH 1EA
SPINDLE OVERRIDE
SPINDLE ORIENTATION
6 HYDRAULIC SOLID CHUCK
PARTS CATCHER
WORK COUNTER
TOTAL COUNTER
CHUCK OPEN/CLOSE
CONFIRMATION DEVICE
CHUCK AIR BLOW (SP. CENTER)
CHUCK AIR BLOW (UPPER CHUCK)
BARFEEDER INTERFACE
CHIP CONVEYOR (SIDE)
CHIP CONVEYOR (REAR)
CHIP WAGON
CALL LIGHT (3 COLORS)
AUTO DOOR
5 DEGREE INDEXING DEVICE
C-AXIS (0.001 DEGREE)
TRANSFORMER
SPINDLE INSIDE STOPPER
AUTO POWER OFF
U-DRILL HOLDER
U-DRILL SLEEVE
2 STEP HYD. PRESSURE DEVICE
COOLANT SUPPLYING (SP. CENTER)
COOLANT SUPPLYING (UPPER CHUCK)
GUN COOLANT
Unit:mm(in)
!!
Detail of T-Slot
KIT450
6 HYDRAULIC HOLLOW CHUCK
SOFT JAW 1SET
TOOL HOLDER (I.D) 2EA
TOOL HOLDER (O.D) 2EA
TOOL HOLDER (MIXED) 1EA
BORING BAR SLEEVE 1SET
DRILL SOCKET MT#1 1EA
FLOOD COOLANT
!!
!!
Specification
KIT60G
KIT Series
Unit:mm(in)
HYUNDAI-KIA CNC Turning Center KIT60G
Unit:mm(in)
STD. TOOL KIT & BOX
LEVELING PADS & BOLTS
FOOT SWITCH 1EA
SPINDLE OVERRIDE
SPINDLE ORIENTATION
GRINDING SPINDLE INTERFACE
10 HYDRAULIC SOLID CHUCK
PARTS CATCHER
WORK COUNTER
TOTAL COUNTER
CHUCK OPEN/CLOSE
CONFIRMATION DEVICE
CHUCK AIR BLOW (SP. CENTER)
CHUCK AIR BLOW
(UPPER CHUCK)
BARFEEDER INTERFACE
CHIP CONVEYOR (SIDE)
CHIP CONVEYOR (REAR)
CHIP WAGON
CALL LIGHT (3 COLORS)
AUTO DOOR
TRANSFORMER
U-DRILL HOLDER
SPECIAL COLOR
2 STEP HYD. PRESSURE DEVICE
GUN COOLANT
SLIDING UNIT FOR EXT. SP.
2ND COOLANT PUMP(250W)
Unit:mm(in)
!
!
!
Detail of T-Slot
!
KIT60G
10 HYDRAULIC HOLLOW CHUCK
SOFT JAW 1SET
FLOOD COOLANT
COOLANT TANK
DOOR INTERLOCK
WORK LIGHT
Specification
KIT Series
Controller
Controller
FANUC 0i -TC
SINUMERIK 802D sl
Control
Communication
Control
Simultaneous Controlled Axes
3 axes (X/Y/Z)
Least Command
0.001mm, 0.0001inch
Controlled Axes(Max.)
2axes (max. 4axes)
Tape code
EIA RS244 / ISO840
Simultaneous Controlled Axes
2axes (max. 4axes)
Data In/Out Port
RS232C
Least Input
0.001mm, 0.0001inch
Linear(Rapid),
Communication Baudrate
19,200bps
Commad Type
Incremental, Absolute
Exponential(Cutting)
PCMCI Card Socket
Provided
Inch/Metric Conversion
G70, G71
Fine Acc & Dec control
Compensation
Feed
Feed Override
0~200%
Stored Pitch Error Compensation
Jog Feed
0~2,000mm/min
Backlash Compensation
Provided
Rapid Override
F1, 5, 25/50, 100%
Circular Protrusion Compensation
Backlash Acc Function
Manual handle feed rate
x1, x10, x100
Spindle Control
Provided
Interpolation
Feed
Tool
Positioning
G00
Leanear
G01
Circular
G02, G03
Dwell
G04
Manual handle feed rate
x1, x10, x100
F0, 25, 50, 100%
Auto Tool Offset
Provided
Rapid Override
Spindle speed function
S5-digit, direct Input
Tool Offset Pairs
32pairs (64EA)
Feed Override
0~120%
Spindle override
50%~150%
Tool nose radius compensation
Provided
Jog Override
0~120%
Spindle Orientation
Provided
Tool geometry/wear compensation
Provided
Auto Acceleration / Deceleration
SOFT, JERK
Rigid Tapping
Provided
Tool Life Management
Provided
Program Memory
10MB
Number of Registerable Program
99EA
Program
Direct input of tool offset value measured Provided
Program
Display
Commad Type
Incremental, Absolute
Program Editing
Del, Ins, Alt, Protect
Least Command
0.001 (0.0001")
LCD Display Device
7.2" Mono
Program No. Search
Program Name
Feed/Rev / Feed/min
G99/G98
Spindle Load Display
on LCD
Sequence No. Search
N4-digit
Program Memory
640m
Spindle Speed Display
on LCD
Programmable data input
G10
Operation
Number of Registerable Program
400EA
Expanded Edit
COPY, MOVE
"Single Block, Machine Lock, Rung Hour/Part Counter, M00/M01,
Background Edit
Provided
Memory Lock, Program No/Sequence No Search, Current Time
Block Skip
1EA
Display, Return to 2nd & 3rd Reference Point, Program Check,
Custom Macro B
Provided
Manual Absolute, Dry Run, Self Diagnosis,
Buffer Register
256byte
Graphic Display, Polar Coordinate Interpolation(M type), Cylindrical
Direct Input of Coordinate measured
Provided
Interpolation(M Type)"
Work Coordinate
G52~G59
Coordinate system shift
Provided
Programmable data input
G10
Mirror Image
Stroke Limit 1, 2, 3
Linear/Circular Interpolation
G01/G02, G03
Display
Interface
STM Function
Background Edit
Provided
Manual Data Input / Rigid Tapping
Provided
LCD Display Device
10.4" TFT
Language
English / Korean / Chinease / EU
Data In/Out Interface
RS232C
Storage Device
CF CARD
Spindle speed function
S5-digit
Tool Command
T
M, H function
M, H
Tool Length Compensation
Provided
Each Axis
Tool Life Management
Provided
Provided
Tool Offset Pairs
128 pairs
Auto return to Reference Point
G74
Tool Function
Coordinate
Interpolation
Constant surface speed control
G96, G97
Multiple threading
G32
Variable lead threading
G34
Check Reference Point
Auto Machine Coordinate
Auxiliary
Multiple repetitive cycle
G70~G76
Canned cycles for drilling
G80~G89
Threading retract
Provided
Handle Interrupt
Add Switch
Skip
G31
Additional Optional Block Skip
9EA
Direct drawing dimension programming
Provided
Dynamic Graphic
Figures in inch are converted from metric values.
Design and specifications subject to change without notice.
Option
Option
Work Coordinate
G53, G54, G59, G153, G500
Auxiliary Function
M-code
Circular Interpolation by R
Provided
Canned Cycle
Graphical Drilling, Milling
Conversion
Mirror, Scale, Rot, Trans
Program Restart
Provided
Spline Interpolation
Figures in inch are converted from metric values.
Design and specifications subject to change without notice.

Similar documents

cnc turning center

cnc turning center Manual Reference Point Return Automatic Reference Point Return Reference Point Return Check Second Reference Point Return Tool Nose Radius Compensation Tool Function Geometry / Wear Compensation Di...

More information

KIT Series

KIT Series As it has been designed as all-in-one bed structure, it has excellent in vibration absorption ability and guarantees the high level of processing. In particular, it is able to keep the continuous a...

More information

cnc multi tasking machine

cnc multi tasking machine Optional Chamfering/Corner R Optional Block Skip 9 EA Handle Interrupt Part Program Storage 160/320/640/1280/2560M(8,400FT)

More information

cnc turning center

cnc turning center Tool Offset Amount Tool Function Geometry / Wear Compensation Direct Input of Tool Offset Value Measured B Tool Offset Amount Tool Offset Pairs Tool Life Management Inch / Metric Conversion Polar C...

More information

VT1150

VT1150 Controlled axis Controlled axis (Cs axis) Simultaneously controlled axes Least input increment Least input increment 1/10 inch/metric conversion Stored stroke check 1,2,3 Chamfering on/off Backlash...

More information