HD series - Drossbach GmbH

Transcription

DR_PRO_HD_SERIE_RZ_0408.qxd:DR_DH_BROSCHÜRE
23.06.2009
13:42 Uhr
Seite 3
Corrugated Plastic Pipe Machines
DROSSBACH
HD series
ID 40 mm – OD 1800 mm
23.06.2009
13:43 Uhr
Seite 4
DROSSBACH HD series
Fast, efficient and more flexible
corrugated plastic pipe production.
DROSSBACH has been producing corrugated plastic pipe machines at a very high level of quality for decades. The
DROSSBACH brand stands for quality, innovative technology and outstanding efficiency, from the smallest right
up to the largest pipe diameters. The renewed HD 1800, for example, is one of the world’s largest corrugated pipe
machines for producing pipes with nominal measurements of up to OD 1800 mm. Thanks to its optimised,
market-orientated program of machines, DROSSBACH has become one of the world’s market leaders. Whether
single corrugated pipe machines or fully synchronised production lines – DROSSBACH offers the complete
solutions.
DROSSBACH has a strong power in innovation across the whole range of machines for the production of
corrugated pipes from ID 40 mm up to OD 1800 mm, mainly for ground installation. All DROSSBACH machines
combine the advantages of great efficiency, performance and flexibility.
Experience the DROSSBACH HD series and invest in leading technology and outstanding efficiency:
With DROSSBACH, the partner for Corrugated Pipe Solutions!
»High output, low weight and great
efficiency are the decisive key figures for
the right investment.«
2
23.06.2009
13:43 Uhr
Seite 5
CORRUGATED PIPE SOLUTIONS
· WIN-WIN PARTNERSHIP
· AFTER SALES
SERVICE
· WATERMANAGEMENT
· ENGINEERING
· CONSULTING
· MACHINERY
· MARKETING
· PIPE SYSTEMS
DIAMETERS mm
MACHINES
AND APPLICATIONS
HD 250
0
250
40 100 150
ID 40 - OD 250
40 – 250
100 – 250
150 – 250
150 – 250
HD 500
100 – 250
1200
150 – 560
150 – 560
150 – 250
150 – 400
ID 150 - OD 1200
150 – 1200
150 – 1200
HD 1800
500 – 1800
500 – 1800
ID 500 - OD 1800
Underground pipe systems
1800
560
100 – 400
ID 100 - OD 560
HD 1200
500
400
cable protection
OD 40 - OD 250
drainage
ID 100 - ID 400
rainwater
ID 150 - ID 1500
wastewater
ID 150 - ID 1500
3
23.06.2009
13:44 Uhr
Seite 6
DROSSBACH HD series
Corrugated pipes with first-class quality and ring
stiffness and all at a much lighter weight.
The innovative corrugated plastic pipes produced by the new
HD series way ahead as far as high quality, low weight and strong
ring stiffness are concerned. The best example of this is the GIGAPIPE
system developed with the improved corrugated pipe technology
at the DROSSBACH Innovation Center. The on-going development
of innovative technologies guarantees the most cost-efficient,
optimised production processes and easy installation. All sewage,
rainwater and drainage systems produced by DROSSBACH fulfil
the applicable European and worldwide standards.
DIN EN
13476
DIN 16961
PROFILE
PIPE SERIES 5
DIN EN ISO
9969
SN8
Long-lasting watertight
in-line belling joint
SAFECONNEC:
Innovative Technology to secure long-term
watertightness.
The secret of the superior long-term watertightness of
GIGAPIPE pipes is the innovative SAFECONNEC technology. It reinforces the plastic pipe joints at their most
important and critical points to ensure their outstanding
long-term resistance and watertightness. Moreover, an
extraordinary strengthening process ensures the
necessary long-term resistance of the joint against
deformation and leaks with an externally welded reinforcement ring.
It holds!
SAFECONNEC reinforces the critical points on plastic
belling joints to ensure a long-term watertight connection. The SAFECONNEC technology, a reinforcement
process, provides the required permanent seal via a
highly rigid reinforcement band welded to the pipe.
Insoluble special
strengthening band
welded onto external
surface to eliminate
typical long-term
creeping of plastics
SAFECONNEC
Gasket
THE GIGAPIPE ADVANTAGES:
Complete sewage and rainwater system with full fitting and
manhole program from ID 150 mm up to ID 1000 mm
Long-term watertightness thanks to SAFECONNEC
Optimised pipe design for highly secure and flexible pipes
Double-walled PP pipe – high chemical resistance
Long service life of approximately 75 - 100 years
Resistant to high pressure jet cleaning systems (180 bar)
Excellent hydraulic properties due to kb = 0,25 mm
No incrustation
Easy to install
Low life cycle cost
4
23.06.2009
13:44 Uhr
Seite 7
DROSSBACH HD series
The fast and flexible quick-change tool system
reduces machine downtimes to a minimum.
The DROSSBACH machines have the advantage of
combining speed and output with a flexible tool
compatibility system by using a new mould block
insert technology.
THE ADVANTAGES
The advantages for reduced downtimes at
maximum efficiency:
This practical benefit increases the productivity with
every single tool change. Due to the compatibility
within the HD series, it is possible to use the tools
from the HD 500 on the HD 1200 and the tools from
the HD 1200 on the HD 1800.
Quick-change system for mould blocks and inserts
Discover the difference in technology and know how:
with DROSSBACH!
and profiled blocks
Tool compatibility of die heads and moulds within
HD 500 / HD 1200 / HD 1800
New mould block insert technology
Direct water-cooling/temperating system for master
Quick change system for die heads
TOOL COMPATIBILITY
DIAMETER
MACHINES
ID 150
up to ID 400
ID 500
up to ID 800
HD 500
HD 1200
HD 1800
5
23.06.2009
13:45 Uhr
Seite 8
DROSSBACH HD 250
Highspeed for maximum production output.
TECHNICAL CHARACTERISTICS HD 250:
Production of corrugated plastic pipes with high production
speeds of up to 22 m/min thanks to directly water-cooled
mould blocks and an integrated full vacuum system.
Corrugated pipe machine mounted onto a solid, welded
frame with horizontally rotating mould blocks in an open
construction.
Full vacuum system for perfect profiling and wall-strengthening
of corrugated pipes.
Equipped with 38 directly water-cooled mould block pairs for
the production of pipes of 6 m length incl. in-line joints.
Mould blocks made of aluminium have a low weight and heat
transfer properties, with a cast water-cooling circuit vacuum
technology.
The most modern technology: wear-free movement of mould
blocks in Cassini curves.
Robust system with bearings guarantees perfect movement
of the mould blocks.
Spiral-mandrel die head for premium quality with high speed
performance and short change-over times
Maintenance-free operation thanks to fully automatic,
centralised lubrication system.
Cooling water circulation in a closed circuit between the
mould blocks and the chiller.
Simple and fast exchange of mould blocks.
6
TECHNICAL DATA OF THE HD 250:
Performance data
Max. mech. production speed
PE/PP output
Measurements/weight
Max. pipe outer diameter (OD)
Min. pipe internal diameter (ID)
Number of mould blocks (per side)
Length
Width
Height (depending on extrusion height)
Length of moulding area
Max. travel
Weight of machine without mould blocks
22 m/min
750 kg/h
250 mm
40 mm
38
3560 mm
1950 mm
> 1800 mm
2020 mm
2800 mm
4680 kg
Products of the HD 250:
Cable protection pipes (rigid and flexible), drainage pipes, percolation
pipes, technical hoses (eg. for vacuum cleaners and swimming pools,
electrics, medical appliances, etc.). Materials used: PE, PP, PVC, PA, ABS,
PVDF, EVA, PTFE, further plastics available upon request.
23.06.2009
13:45 Uhr
Seite 9
DROSSBACH HD 500
Superior performance for medium sized diameters.
Production of corrugated plastic pipes with high production
speeds of up to 9 m/min thanks to directly water-cooled
mould blocks and an integrated full vacuum system.
Corrugated pipe machine mounted onto a solid, welded
frame with horizontally rotating mould blocks in an open
construction.
Full vacuum system for perfect profiling and wall-strengthening
of corrugated pipes.
Equipped with 39 directly water-cooled mould block pairs for
the production of pipes of 6 m length incl. in-line bellings.
Mould blocks made of aluminium have a low weight and
heat transfer properties – cast water-cooling circuit vacuum
technology.
With measurements from ID 150 up to ID 400, the mould
block inserts are compatible with the HD 1200.
The most modern technology: wear-free movement of mould
blocks in Cassini curves.
Robust system with bearings guarantees perfect movement
of the mould blocks.
performance and short change-over times.
Cooling water circulation in a closed circuit between the
mould blocks and the chiller.
Simple and fast exchange of mould blocks and inserts.
Performance data
PE/PP output
Measurements/weight
Length
Width
Max. travel
9 m/min
950 kg/h
560 mm
100 mm
39
4300 mm
2650 mm
> 2600 mm
2060 mm
2400 mm
12000 kg
Sewage pipes, seepage pipes, percolation pipes, cable protection pipes
(rigid and flexible), drainage pipes, special pipes (tunnel drainage, railway
line drainage, etc.) Materials used: PE, PP, PVC, PA, ABS, PVDF, further
plastics available upon request.
7
7
23.06.2009
13:46 Uhr
Seite 10
DROSSBACH HD 1200
Maximum variety in pipe diameters.
Production of corrugated pipes at a high speed of 4 m/min
thanks to directly water-cooled mould blocks and the full
vacuum system to assist in the cooling process..
Hydraulic operation transports the complete line, which is
fixed on rails, from the back position (heating, mould blocks
exchange) to the production process.
Improved aluminium mould blocks moving on steel supports
following the DROSSBACH shuttle principle.
Parking station with additional in-line belling mould blocks
for the production of pipes of variable lengths > 4 m.
Fast change over of mould and inserts blocks in the
easy-to-access parking station.
Mould block inserts – only fixed with quick fasteners – allows
rapid change of measurements.
With measurements from ID 150 up to ID 400 the mould
block inserts and die heads are compatible with the HD 500.
The mould blocks and die heads of the HD 1200 are also
compatible for the HD 1800 for measurements from ID 500
up to ID 800.
Electric adjustment vertical and horizontal for perfect
production process.
Employee safety – machine recoils in emergency situations
Control and limitation of torque.
Cooling of electronic parts via air conditioner in a separate
control cabinet.
8
Performance data
PE/PP output
Measurements/weight
Length
Width
Max. travel
4 m/min
1200 kg/h
1200 mm
150 mm
9/10
5600 mm
5270 mm
3610 mm
2807 mm
4000 mm
28000 kg
Corrugated plastic pipes for sewage, seepage, percolation systems and
special pipes for tunnel drainage, railway line drainage and more.
Spiral-mandrel die head for premium quality with high
speed performance and short change-over times.
Computer-controlled operation and monitoring of the
complete movement and machine processes.
23.06.2009
13:46 Uhr
Seite 11
NEW: DROSSBACH HD 1800
Superior quality in pipe sizes up to OD 1800.
Production of corrugated pipes at the maximum speed of
1,35 m/min thanks to directly water-cooled mould blocks
and the full vacuum system to assist in the cooling process.
Hydraulic operation transports the complete line, which is
fixed on rails, from the back position (heating, mould blocks
exchange) to the production process.
Improved aluminium mould blocks moving on steel supports
following the DROSSBACH shuttle principle.
Parking station for additional in-line belling mould blocks.
Fast change over of mould blocks and inserts in the
easy-to-access parking station.
Mould block inserts – fixed with quick fasteners –
allows for the rapid changing of measurements.
With diameters of ID 500 up to ID 800, the mould blocks and
die heads are compatible with the HD 1200 and HD1800
machines.
Electric adjustment of height and width for optimised
production process.
Employee safety – machine recoils in emergency situations.
Control and limitation of torque.
Cooling of electronic parts via air conditioner in a separate
control cabinet.
performance and short change-over times.
Computer-controlled operation and monitoring of the
complete movement and machine processes.
Performance data
Max. mech. Production speed
PE/PP output
Measurements/weight
Length
Width
Max. travel
1,35 m/min
1535 kg/h
1800 mm
500 mm
6/7
8540 mm
6600 mm
4870 mm
4082 mm
4850 mm
43000 kg
Corrugated plastic pipes for sewage, rainwater and drainage systems,
special pipes for tunnel drainage, railway line drainage and more.
9
23.06.2009
13:48 Uhr
Seite 12
Maxims of our tailor-made system solutions
Performance, Efficiency and Competence.
From one of the most efficient corrugated plastic pipe machines to complete ready-made, synchronised production lines –
DROSSBACH develops excellent long-term technical solutions. There is a wide range of downstream equipment available for
every type of machine. DROSSBACH engineers optimise the complete production line to enable highly efficient manufacturing.
Thereby the customer is able to produce high output with low costs while using all resources.
TECHNICAL DATA:
Performance data
PE/PP output
Measurements/weight
Length
Width
Max. travel
10
HD 250
HD 500
HD 1200
HD 1800
22 m/min
750 kg/h
9 m/min
950 kg/h
4 m/min
1200 kg/h
1.35 m/min
1535 kg/h
250 mm
40 mm
38
3560 mm
1950 mm
>1800 mm
2020 mm
2800 mm
4680 kg
560 mm
100 mm
39
4300 mm
2650 mm
>2600 mm
2060 mm
2400 mm
12000 kg
1200 mm
150 mm
9/10
5600 mm
5270 mm
3610 mm
2807 mm
4000 mm
28000 kg
1800 mm
500 mm
6/7
8540 mm
6600 mm
4870 mm
4082 mm
4850 mm
43000 kg
23.06.2009
13:48 Uhr
Seite 13
(from right to left) Extruder, Corrugator / die head,
Spray Bath, Cutter, Socket end machine, Packaging
11
23.06.2009
13:42 Uhr
Seite 2
Thanks to a wealth of experience in long-term, watertight
corrugated pipe systems, high-quality plastic pipe manufacturing
facilities and lasting pipe business services, DROSSBACH and its
partners offer customer-orientated solutions. Furthermore, close
contacts to long-term partners verify DROSSBACH’s excellent
reputation worldwide.
DROSSBACH technology is employed all over the world in different
applications including sewage, storm water, drainage and cable
protection. The combination of continuous improvements,
innovative thinking and the synergies of win-win partnerships
plays an important role in helping to reach a leading position in
the corrugated pipe business.
WELCOME TO THE WORLD OF DROSSBACH!
HD 500
HD 1200
Member of
DROSSBACH GMBH & CO. KG
Max-Drossbach-Strasse 7
D-86641 Rain am Lech
Fon : + 49 (0) 90 90 . 702 - 0
Fax : + 49 (0) 90 90 . 702 -399
email: info@drossbach.de
www.drossbach.de
DROSSBACH. A member of the
HD 1800
Technical adjustments and printing errors subject to change.
HD 250
Group.

HD series - Drossbach GmbH

Transcription

Similar documents

Toylet Cleaner Mould

Gearphoria Josh Smith Review

Drainex - Incledon

SD-Rockguard-Installation

SfB Stampaggio fratelli Bassotto has been opera

FlexTrack-General_Presentation

Industrial Fabrics, Inc. - RockGuard Pipeline Protection Mesh

Fernco Flexible Coupling Installation - Fernco