Mountz Air Torque Screwdrivers Catalog

Transcription

Version 1.0
Table of Contents
1.1
1.2
Flex Power In-Line Air Tools (Lever & Push-to-Start)
Flex Power Pistol Grip Air Tools
1.3
1.4
Flex Power Right Angle Air Tools
EZ-TorQ (Torque Analyzers)
1.5
1.6
TorqueLab LTT-Series (Torque, Angle & Force Analyzers)
EZ-Glider Linear Torque Arm
1.7
1.8
EZ-Slider Torque Arm
EZ-Glider Articulated Torque Arm
1.9
1.10
EZ-Glider Telescoping Torque Arm
EZ-Glider Telescoping Torque Arm
1.11
1.12
EZ-Glider Position Control Torque Arm
Accessories
1.13
1.14
Special Bits
Bit Holders & Nutsetters
1.15
1.16
Power Bits
Power Bits
1.17
1.18
Tool Balancers
Flex Power In-Line Pulse Tools
1.19
1.20
Flex Power Pistol Pulse Tools
Flex Power Right Angle Pulse Tools
1.21
1.22
Sleeve Drive Impact Sockets
Pulse Tool Selection Guide
TABLE OF
CONTENTS
i
MC 14 (version1.0)
In-Line
Pneumatic Screwdrivers
KEY FEATURES
Various models that range from 2.6 - 95.5 lbf.in
High performance oil free motor delivers environmentally friendly,
durable, power and speed. One third more power than competitive
models.
Safe operation with reduced noise, vibration and low torque reaction.
High accuracy patented clutch with precision automatic shut-off.
Soft texture ergonomic grip for operator comfort.
One touch torque adjustment, eliminates difficult set up of drivers.
Torque nut cover prevents operator tampering.
Four different colored tool bands allow color coding of specific torque
values (Red, Green, Blue, Yellow are included)
Built with new aluminum alloy to provide durability and reduced
maintenance - no cracking, fading or chipping found in composite
body tools.
Wide ranges and RPM selections all for easy tool specification based
on application requirements.
EZ-GLIDER
The torque arm keeps the
tool perpendicular and
prevents cross threading
and side load. Maneuvers
smoothly as arm absorbs
torque reaction.
COLOR CODE RINGS
Four different colored tool bands allow
color coding of specific torque values
(Red, Green, Blue, Yellow are
included)
Model
XP35
XP35PS
XP40
XP40PS
XP45
XP45PS
XP48
XP48PS
XP60
XP60PS
Driver Type
Lever Start
Push-to-Start
Lever Start
Push-to-Start
Lever Start
Push-to-Start
Lever Start
Push-to-Start
Lever Start
Push-to-Start
Item #
360000
360005
360001
360006
360002
360007
360003
360008
360004
360009
Torque Ranges
lbf.in
N.m
2.6 - 17.4
2.6 - 17.4
4.3 - 30.4
4.3 - 30.4
6.9 - 34.7
6.9 - 34.7
4.3 - 39.1
4.3 - 39.1
26 - 95.5
26 - 95.5
0.3 - 2
0.3 - 2
0.5 - 3.4
0.5 - 3.4
0.8 - 3.9
0.8 - 3.9
0.5 - 4.4
0.5 - 4.4
2.9 - 10.8
2.9 - 10.8
RPM
2200
2200
1000
1000
800
800
1700
1700
550
550
Grip
Dia.
1/4"
1
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/4"
1 1/2
1 1/2"
1 1/2"
1 1/2"
Length
Drive Size
Weight
lbs.
8"
7"
8"
7"
8"
7"
9 1/2"
8 1/2"
9 1/2"
8 1/2"
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1.3
1.2
1.3
1.2
1.3
1.2
1.9
1.8
1.9
1.8
Noise
dBa
Air
Usage
cfm
72
72
72
72
74
74
76
76
76
76
8.5
8.5
8.5
8.5
8.5
8.5
15.9
15.9
15.9
15.9
Min.
Air
Hose
Bore
Fastening Capacity
Machine
Tapping
Screw Dia
Screw Dia
5.0 mm
5.0 mm
5.0 mm
5.0 mm
5.0 mm
5.0 mm
8.0 mm
8.0 mm
8.0 mm
8.0 mm
M2.2 - M4.5
M2.2 - M4.5
M2.8 - M5.2
M2.8 - M5.2
M3.3 - M5.8
M3.3 - M5.8
M3.6 - M6.3
M3.6 - M6.3
M5.0 - M7.6
M5.0 - M7.6
M1.7 - M3.5
M1.7 - M3.5
M2.2 - M4.2
M2.2 - M4.2
M2.7 - M4.7
M2.7 - M4.7
M2.8 - M5.3
M2.8 - M5.3
M4.0 - M6.3
M4.0 - M6.3
In-Line
1.1
800.456.1828
Mountz MC14 catalog Copyright
2009 all rights reserved
Pistol Grip
KEY FEATURES
Various models that range from 2.6 - 156.2 lbf.in.
High performance oil free motor delivers environmentally friendly,
durable, power and speed. One third more power than competitive
models.
One-touch torque adjustment, eliminates difficult set up of
drivers. Torque nut cover prevents operator tampering.
Built with new aluminum alloy to provide durability and reduced
maintenance - no cracking, fading or chipping found in composite
body tools.
Wide ranges and RPM selections all for easy tool specifications
based on application requirements.
Patented Multi-Air inlet selection (handle, back and top) provides
versatility for hose connection depending on application. Provides
flexible options for production set ups and space restrictions.
B
C
B
C
MULTI-AIR SELECTION
3 locations to attach air hose:
A Handle
A
B Top
C Back
A
Model
Item #
Torque Ranges
lbf.in
N.m
XP35P
XP41P
XP48P
XP55P
XP65P
360010
360011
360012
360013
360014
2.6 - 17.4
4.3 - 30.4
6.1 - 43.4
10.4 - 65.1
26 - 156.2
0.3 - 2
0.5 - 3.4
0.7 - 4.9
1.2 - 7.4
2.9 - 17.6
RPM
Grip
Dia.
2200
1000
1700
1000
300
1 1/4"
1 1/4"
1 1/2
1 1/2"
1 1/2"
Length
Drive Size
Weight
lbs.
7"
7"
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1.3
1.3
2.3
2.3
2.3
8 1/2"
8 1/2"
8 1/2"
Noise
dBa
Air
Usage
cfm
74
74
78
78
78
9.9
9.9
19.4
19.4
19.4
Min.
Air
Hose
Bore
Fastening Capacity
Machine
Tapping
Screw Dia
Screw Dia
5.0 mm
5.0 mm
8.0 mm
8.0 mm
8.0 mm
M2.2 - M4.5
M2.8 - M5.2
M3.6 - M6.3
M3.8 - M6.9
M5.0 - M9.3
M1.7 - M3.5
M2.2 - M4.2
M2.8 - M5.3
M3.0 - M5.9
M4.0 - M7.2
PISTOL GRIP
ISO 9001and ISO 17025 Company
1.2
Right Angle
KEY FEATURES
Various models that range from 2.6 - 95.5 lbf.in.
High performance oil free motor delivers environmentally friendly, durable, power
and speed. One third more power than competitive models.
One-touch torque adjustment, eliminates difficult set up of drivers. Torque nut
cover prevents operator tampering.
Four different colored tool bands allow color coding of specific torque values
(Red, Green, Blue, Yellow as standard are included)
Built with new aluminum alloy to provide durability and reduced maintenance - no
cracking, fading or chipping found in composite body tools.
Wide ranges and RPM selections all for easy tool specification based on
application requirements.
Model
Item #
Torque Ranges
lbf.in
N.m
XP35A
XP40A
XP48A
XP55A
XP60A
360015
360016
360017
360018
360019
2.6 - 17.4
4.3 - 30.4
4.3 - 39.1
10.4 - 65.1
26 - 95.5
0.3 - 2
0.5 - 3.4
0.5 - 4.4
1.2 - 7.4
2.9 - 10.8
RPM
Grip
Dia.
Length
Drive Size
Weight
lbs.
2200
1000
1700
1000
550
1 1/4"
1 1/4"
1 1/2"
1 1/2"
1 1/2"
11 1/4"
11 1/4"
13 1/4"
13 1/4"
13 1/4"
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1/4" F/Hex
1.75
1.75
3.25
3.25
3.25
COLOR CODE RINGS
Four different colored tool bands allow
color coding of specific torque values
(Red, Green, Blue, Yellow are
included)
Noise
dBa
Air
Usage
cfm
Min.
Air
Hose
Bore
Fastening Capacity
Machine
Tapping
Screw Dia
Screw Dia
72
72
76
76
76
8.5
8.5
15.9
15.9
15.9
5.0 mm
5.0 mm
8.0 mm
8.0 mm
8.0 mm
M2.2 - M4.5
M2.8 - M5.2
M3.6 - M6.3
M3.8 - M6.9
M5.0 - M7.8
M1.7 - M3.5
M2.2 - M4.2
M2.8 - M5.3
M3.0 - M5.9
M4.0 - M6.3
COIL AIR HOSE
Dual swivel hose fittings provide
360 rotation.
Right Angle
1.3
800.456.1828
Torque
Analyzers
TorqueLab
LTT Series
Torque, Angle & Force Analyzer
with ARCII Technology
KEY FEATURES
Accuracy
Accuracy
0.5% of reading from 20% to 100% of full scale.
1% of reading from 10% to 20% of full scale.
Recommended for all hand screwdrivers, wrenches, or power tools.
Features a built-in transducer and can connect to an external transducer.
Provides EZ-Plug & Play with Mountz Transducers. Features ARCII
technology, an instant auto-recognition system of the transducer connected
to the LTT.
Selection of six operation modes:
Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle
Seven units of torque measurements:
ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Two units of force measurement: lbf and kN
Features built-in Tool Tests operation.
Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program
for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader
for updating the LTT operating systems.
Excel Add-In
for Real-Time data collection into an Excel spreadsheet.
It provides statistics calculations.
Flash memory allows upgrades to be done by the user in the field &
internet through the USB port.
Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz
Six-digit display and easy to read menu structure.
Real Time Clock for time stamping of readings.
Model
Item #
American
Torque Ranges
S.I.
LTT10i
LTT25i
LTT50i
LTT100i
LTT250i
LTT50F
LTT100F
LTT250F
068400
068401
068402
068403
068404
068405
068406
068407
1 - 10 lbf.in
2.5 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
25 - 250 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
25 - 250 lbf.ft
11.3 - 113 cN.m
28.25 - 282.5 cN.m
56.5 - 565 cN.m
113 - 1130 cN.m
282.5 - 2825 cN.m
6.8 - 67.8 N.m
13.56 - 135.6 N.m
33.9 - 339 N.m
USB interface to download readings to PC.
Metric
Drive Size
Wt.
1.2 - 11.5 kgf.cm
2.9 - 28.8 kgf.cm
5.8 - 57.6 kgf.cm
11.5 - 115 kgf.cm
28.8 - 288 kgf.cm
0.7 - 6.9 kgf.m
1.4 - 13.8 kgf.m
3.5 - 34.5 kgf.m
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
3/8" F/Sq
1/2" F/Sq
1/2" F/Sq
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
High Capacity Li-ion Batteries for long life (30 hours with standard
transducers and 16 hours with brushless rotary).
Can connect to most mv/v transducers and can store calibration data for
up to 50 non-smart torque sensors.
The 5VDC capability allows unit to be used with a Brushless Rotary
Transducer for testing pulse tools and high RPM tools.
Torque and Angle data is displayed simultaneously when used with Torque
and Angle transducers, up to 8000 RPM for angle measurement.
Stores a total of 5000 data points.
Real time graph of torque vs. time using associated PC Windows software.
CABLE CHART Cable
Transducer
Item #
RTSX-A
All BLRTSX models
BMX
LPX
SDX
RTSX
ETX
072000
072001
072002
072003
072004
072005
072006
ACCESSORIES INCLUDED ACCESSORIES
OPTIONAL
Universal Charger (100 - 240VAC)
USB Cable
Mountz Software Programs
Run Down Adapter
Case
Features Go / No Go LEDs that illuminate when high or low setting is
achieved.
Description
Item #
Charger 100 - 240VAC
USB Cable
Battery Pack
Multiplexer
Bar Code Reader
770300
770319
072506
072998
072997
Mounting Bracket
072608
(for LTT model 10i-50F)
Mounting Bracket
072606
(for all other LTT models)
PLC Interface
LTT
1.5
PLUG & PLAY
NOTE!
Since a tester cannot always duplicate actual joint
characteristics, the torque reading displayed on the LTT may
vary from the actual torque that a tool will apply to a joint.
When critical assemblies are involved, the torque output of the
power tool being used should be verified on the actual
assembly using a calibrated measuring torque tool.
072014
CERTIFIED
Supplied with NIST-Traceable Certification of Calibration
EZ-Glider
Linear Torque Arms
KEY FEATURES
Prevents cross threading and side load. Keeps tool perpendicular.
Reduces RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production.
Extends in horizontal direction and arm length is adjustable.
Maneuvers smoothly as the arm absorbs torque reactions from electric & pneumatic tools.
Built with seasoned craftsmanship, every torque arm cylinder has four rows of ball bearings for smooth
movement.
A magnet on the backside of the tool clamp holds driver firmly against arm.
Includes an in-line driver clamp.
LINEAR TORQUE ARMS
Model
Item #
Max Torque
S.I.
American
EZ-12
EZ-25
EZ-40
EZ-100
260077
260078
260079
260080
8.8 lbft.ft
18.4 lbft.ft
29.5 lbft.ft
73.7 lbft.ft
12 N.m
25 N.m
40 N.m
100 N.m
Clamp
Dia.
1-1 1/2"
1-2"
1-2"
1-2"
Height
Min
Arm
Reach
Max
Arm
Reach
32 1/2"
36 1/2"
40 1/2"
40 1/2"
16 1/2"
16 1/3"
21 7/8"
25 1/3"
22"
22"
29 1/2"
33"
Balancer
Capacity
1.1 - 2.6 lbs.
2.2 - 4.8 lbs.
3.1 - 4.8 lbs.
4.4 - 7.7 lbs.
NOTE!
An additional balancer (Item #260152) can be added to the EZ-40 & EZ-100 model to
increase balancer capacity. The additional balancer increases the dual balancer capacity to
5.3 - 8.8 for the EZ-40, and 6.6 - 13.2 for the EZ-100.
Driver & Transformer
not included.
ACCESSORIES
DOWNWARD
ASSISTANCE KIT
These kits are ideal for self-tapping
applications. The downward
assistance system requires no effort
from the operator to press downward
on the driver as the operator simply
presses the trigger of the driver and
the cylinder glides the tool
downward automatically. There are
two system options available Easy
Push and Servo-Assisted .
EXTENSION SLIDES
ARP SYSTEM (not pictured)
Expands the maximum arm reach
of the EZ-Glider Linear Arms.
ARP (automatic rest position):
A recoil spring positioned on the slide
to permit the arm to come back to the
rest position as soon as you release it.
Model
Extends Max.
Item #
Arm Reach
EZ-12
EZ-25
EZ-40
EZ-100
27.5"
27.5"
36"
41"
260088
260089
260090
260091
Servo-Assisted system features a
built in collet chuck that allows the
system to be used at any height.
Easy Push system operates only at a
preset height by using a mechanical
stop that is set along the pole.
Servo-Assisted System
Both systems can be installed on
a Linear or Articulated arm.
Model
Item #
EZ-12
EZ-25
EZ-40
EZ-100
260096
260097
260097
-
EXTENSION
DOUBLE SLIDE
ANTI-ROTATING
CLAMP
Expands the maximum arm
reach of the EZ-Glider Linear
Arms by adding a second
slide to the arm.
Attach an Anti-Rotating
Clamp to prevent the arm
from rotating side-to-side to
help the operator target the
screw quickly and precisely.
Model
Description
Item #
Pushing
Force
Stroke
Model
Extends Max.
Arm Reach
Item #
EZ-12
EZ-25
EZ-40/100
EZ-12
EZ-25
EZ-40/100
EZ-40/100
EZ-100
Servo-Assisted Electric Kit
Easy Push Electric Kit
260098
260099
260100
260043
260041
260040
260039
260038
11 lbs.
17.6 lbs.
17.6 lbs.
11 lbs.
19.8 lbs.
19.8 lbs.
33 lbs.
55 lbs.
4 7/8"
6 1/4"
7 7/8"
7 7/8"
7 7/8"
EZ-12
EZ-25
EZ-40
EZ-100
31.5"
30.5"
41"
46"
260092
260093
260094
260095
for EZ-12 & 25 Linear Arms
Item #260019
for EZ-40 & 100 Linear Arms
Item #260022
EZ-GLIDER
1.6
EZ-Slider
Sliding Torque Arms
KEY FEATURES
An ideal ergonomic solution for multi-tool applications such as a moving production and assembly line.
Ideal for automotive production lines.
Maintenance Free.
Arm is crafted with a lightweight durable carbon fiber.
Easy to install and improves operator comfort and productivity.
Requires little space and doesn’t disrupt production flow.
Mountable with a standard rail system, trolley, aluminum extrusion, wall or existing work station.
Eliminates torque reaction of power tools. Can be used with a variety of assembly tools like angle
nutrunners and electric & pneumatic screwdrivers.
Arm slides up and down and provides X & Y axis mobility.
EZ-SLIDER TORQUE ARMS
Model
Item #
Max Torque
lbf.ft
N.m
Clamp
Dia.
Max Vertical
Stroke
Balancer
Capacity
EZ-Slider 8
EZ-Slider 15
EZ-Slider 40
EZ-Slider 80
260101
260102
260129
260130
5.9
11
29.5
59
*
*
1 - 2"
1 - 2"
17 3/4"
17 3/4"
16 1/2"
16 1/2"
4.4 - 6.6 lbs.
4.4 - 6.6 lbs.
13.2 - 17.6 lbs.
17.6 - 22 lbs.
8
15
40
80
Rail not included.
* The EZ-Slider 8 & 15 comes with a standard 3/8" air fitting. An electric tool clamp is sold separately.
ACCESSORIES
GLIDING RAIL SYSTEM
EZ-Slider arm slides up and down. Gliding Rail System allows the EZ-Slider arm to glide horizontally
(side-to-side) on a production floor. Combine these two items and get the Slide & Glide movement.
The Gliding Rail System can mount to a standard rail system, wall, aluminum extrusion or existing
overhead system and is available in a variety of lengths. The EZ-Slider mounts on to the Carriage .
Each Gliding Rail System includes one Carriage.
(Standard Gliding Rail System pictured)
Model
Working Distance/Item #
Standard Gliding Rail System
(for EZ-Slider 8, 15 & 40)
High Torque Gliding Rail System
(for EZ-Slider 80)
450mm
#260103
420mm
#260131
650mm
#260104
820mm
#260132
Pivot joints allow
total movement and
flexibility.
850mm
#260105
1320mm
#260133
1050mm 1350mm 1850mm
#260106 #260107 #260108
1820mm
#260134
CARRIAGE (Only for Standard Gliding Rail System)
Additional Carriages can be purchased separately and added only to the Standard
Gliding Rail System, which allows for multiple Slider Arms to be used freely on a
rail system. A Thrust Stopper should be placed between each carriage.
Item #260109
Driver not included.
BALANCER
CARRIAGE
Features a hook for
mounting a tool balancer.
It can only be mounted to
the Standard Gliding Rail
System.
Item #260042
THRUST STOPPER
When having multiple
carriages mounted to
the Standard Gliding
Rail System, it s
recommended to place
a Thrust Stopper
between each carriage.
TOOL CLAMP FOR
ELECTRIC DRIVERS
Model
Item #
Clamp Dia.
EZ-Slider 8
260110
1 - 2"
EZ-Slider 15
260111
1 - 2"
*Clamps for VZ & VB-Series models ONLY.
Item #260044
EZ-SLIDER
1.7
EZ-Glider
Articulated Torque Arms
KEY FEATURES
Prevents cross threading and side load. Keeps tool
perpendicular.
Reduces RMI (Repetitive Motion Injury) and CTS
(Carpal Tunnel Syndrome) while boosting production.
With the ability to bend like an elbow, the torque arm
provides agility to position the tool in a variety of
positions for different applications. Arm can be set at
an inclination of 0 , 22.5 & 45 .
Provides smooth flexible range as the arm absorbs
torque reactions from electric & pneumatic
screwdrivers, angle nut runners, pulse tools, pistol
grip style tools, grinders & drills.
Arm length is adjustable.
Includes an in-line driver clamp.
Versatile torque arm works with a variety of tools,
using different tool clamp options: angle drivers,
pistol grip drivers & in-line drivers.
Driver & Transformer not included.
ARTICULATED TORQUE ARMS
Model
Item #
Max Torque
S.I.
American
Height
0
EZ-12R
EZ-25R
EZ-40R
EZ-100R
260081
260082
260083
260084
8.8 lbft.ft
18.4 lbft.ft
29.5 lbft.ft
73.7 lbft.ft
32 1/2"
36 1/2"
40 1/2"
40 1/2"
15 1/8" - 21"
15 1/2" - 21 1/2"
22 1/4" - 30"
26 1/3" - 34"
12 N.m
25 N.m
40 N.m
100 N.m
Min and Max Arm Reach at Inclination
22.5
45
14 1/2" - 20"
15" - 20 1/2"
21 1/8" - 29"
25 1/8" - 33"
12 1/3" - 18"
12 7/8" - 18 1/2"
18 1/8" - 26"
22" - 29 1/2"
Balancer
Capacity
1.1 - 2.6 lbs.
2.2 - 4.8 lbs.
3.1 - 4.8 lbs.
4.4 - 7.7 lbs.
NOTE!
An additional balancer (Item #260152) can be added to the EZ-40R & EZ-100R model to increase balancer
capacity. The additional balancer increases the dual balancer capacity to 5.3 - 8.8 for the EZ-40R, and 6.6 - 13.2 for
the EZ-100R.
ACCESSORIES
An in-line driver clamp is included with the torque arm. Other clamp options are available and sold separately.
Rotating Clamp
Pistol Grip Clamp
Description
For Model: EZ-12R
Clamp Dia.
Item #
Rotating Clamp
Pistol Grip Clamp
Angle Driver Clamp
Nipple Clamp
1" - 1.5"
1" - 1.5"
1" - 1.5"
*
260027
260008
260028
260007
Angle Driver Clamp
For Models: EZ-25R & 40R
Clamp Dia.
Item #
1" - 2"
1" - 2"
1" - 2"
-
260030
260031
260032
-
Nipple Clamp
For Model: EZ-100R
Clamp Dia.
Item #
1" - 2"
-
260061
-
* Nipple clamp includes 1/4" and 1/8" - hose exhaust 8mm.
EZ-GLIDER
1.8
EZ-Glider
Telescoping Torque Arms
Driver not included.
KEY FEATURES
Crafted with lightweight durable carbon fiber the arm collapses like a telescope.
Easy-to-use, requires little space and doesn t disrupt production flow.
The effortless handling of the torque arm provides comfortable tool operation
and increased production.
Mountable and easy to install on a wall, workbench and a standard rail or trolley system.
Maintenance free.
Eliminates torque reaction of power tools. Can be used with a variety assembly tools
like, electric & pneumatic screwdrivers, angle nutrunners, pulse tools, pistol style tools,
grinders, impact wrenches, drills, sanders, and percussion tools.
Long arm reach capability up to 8 ft.
Perfect for MVI applications.
Universal Adapter included with EZ-12T, 30T, 80T & 140T models.
Torque capacity up to 147.5 lbf.ft (200 N.m).
MOUNTING TO THE "STANDARD GLIDING RAIL SYSTEM"
The Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be
used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface
bracket (sold separately).
Standard Gliding Rail System
INTERFACE BRACKET
Interface Bracket
Item #
for EZ-30T, 80T & 140T
for EZ-200T
260051
260052
Working Distance/Item #
450mm
650mm
850mm
1050mm 1350mm 1850mm
#260103 #260104 #260105 #260106 #260107 #260108
SLEEVE KIT (ACCESSORY)
Item # 260150
Connect Standard Gliding Rail System together.
EZ-GLIDER
1.9
800.456.1828
TOOL POSITIONING OPTIONS
Besides the standard in-line tool mounting
position, the telescoping arm can be used
with assembly tools in a variety of positions.
For some tool positioning options, different
tool clamp needs to be ordered separately.
P1
P2
P3
P4
Standard Tool Balancer needs to
be mounted above an in-line tool.
TELESCOPING TORQUE ARMS
Model
Item #
Max. Torque
N.m
lbft.ft
EZ-12T
EZ-12T/1500
EZ-12T/2000
EZ-30T
EZ-30T/1500
EZ-30T/2000
EZ-30T/2500
260075
260115
260116
260076
260117
260118
260119
8.8
8.8
8.8
22.1
22.1
22.1
22.1
12
12
12
30
30
30
30
Clamp
Dia.
Min
Arm
Reach
Max
Arm
Reach
Weight
of Arm
P1
P2
1 - 1.5"
1 - 1.5"
1 - 1.5"
1 - 2"
1 - 2"
1 - 2"
1 - 2"
18.1"
25.6"
32.3"
18.7"
25.8"
32.4"
39.1"
37"
59"
78.7"
37.5"
59"
78.7"
98.4"
1.35 lbs.
2.7 lbs.
3.3 lbs.
1.5 lbs.
3.3 lbs.
4 lbs.
4.4 lbs.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes, Order Clamp #260145
HIGH TORQUE TELESCOPING ARMS
Model
Item #
Max. Torque
N.m
lbft.ft
EZ-80T/1500
260120
59
EZ-80T/2000
260121
59
EZ-80T/2500
260122
59
EZ-140T/1500
260123
103.3
EZ-140T/2000
260124
103.3
EZ-140T/2500
260125
103.3
EZ-200T/1500
260126
147.5
EZ-200T/2000
260127
147.5
EZ-200T/2500
260128
147.5
* Customer must provide information (Brand &
Clamp
Dia.
Min
Arm
Reach
80
1 - 2"
28.1"
80
1 - 2"
34.6"
80
1 - 2"
41.3"
140
1.25 - 2"
36.5"
140
1.25 - 2"
46.4"
140
1.25 - 2"
56.2"
200
*
37.4"
200
*
47.2"
200
*
57.1"
Model) on each tool being used with the
BALANCING KIT FOR VERTICAL MOUNTING
A balancing kit can be mounted on the side of any of
telescoping arm. It allows the arm to be used with pistol grip
tools and angle nutrunners (see tool position options above for
using angle nutrunners with arms).
Model
Item #
Balancer Capacity
Stroke
E1
E2
E3
E4
260140
260141
260142
260143
2.2 - 4.4 lbs.
2.2 - 5.5 lbs.
4.4 - 8.8 lbs.
8.8 - 13.2 lbs.
63"
78.75"
78.75"
78.75"
Max
Arm
Reach
Weight
of Arm
59"
6.6 lbs.
78.7"
7.1 lbs.
98.4"
7.7 lbs.
59"
7.7 lbs.
78.7"
8.4 lbs.
98.4"
8.8 lbs.
59"
7.7 lbs.
78.7"
8.4 lbs.
98.4"
8.8 lbs.
arm. The clamp is custom
Example of E1
Balancer Kit being
attached to a
telescoping arm.
Tool Postion Options
P3
P1
P2
No
No
No
Tool Postion Options
P3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
made to fit the tool being used.
P4
No
No
No
P4
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
NOTE!
It is recommended to use a tool balancer
with all EZ-Glider Telescoping Arm models.
The telescoping arms should not be used at
maximum arm reach on a permanent basis.
EZ-GLIDER
1.10
MAGNETIZER / DEMAGNETIZER
Magnetize or demagnetize bits and
parts instantly.
Accessories
Electric Torque Screwdrivers
Item #120815
TOOL STAND
A rugged adjustable tool support
stand. Prevent tool damage due to
dropping or mishandling. Convenient
tool positioning - adjust both vertically
and horizontally. Electric tool cords
can be tie-wrapped to the vertical base
to keep work station clean. 360
degree swivel. Four foot high,
maximum arm length 1.75 feet.
A balancer is recommended.
Model: MT-10
Item #060050
COIL AIR HOSE
Pneumatic Center Block
Fitted with a pre-tapped
plumbing holes. For attaching air
fittings or air hose on MT-10 Tool
Stand.
Item #061385
Dual swivel hose fittings provide 360º rotation. Durable polyurethane
hose - 8mm ID. Flexible, lightweight and good recoil memory. 1/4
NPT fitting. Burst pressure 426 PSI at 73º F
Length
Item #
6m
10m
360030
360031
COUPLER
for Air Tool (Universal 1/4 female)
Item #360033
FITTINGS
for Air Tool 1/4" Female (Milton type)
Item #360034
for Air Tool 1/4" Male (Milton type)
Item #360035
REGULATOR
BENCH CLAMP
Used to clamp MT-10 Tool Stand
base to table tops. This handy
unit eliminates hole drilling and
secures the tool stand in place.
It s flexible and ready to move at
a moments notice.
Model: 311
Item #180035
MAG-O-NETS
Item #360032
NPT Port Size: 1/4"
Filter Element: 5μ
Max. Input Pressure: 150 PSI
Max. Output Pressure: 7 ~ 140 PSI
Max. Flow: 38.8 cfm
Operating Temp. Range: 40°F ~ 140°F
Drain Capacity: 15 ml
Oil Capacity: 125 ml
Recommendable Lubricants: ISO VG-32
(actual size)
Magnetize bits by sliding a
Mag-O-Net onto the bit.
Desc.
Item #
Inner
Dia.
Outer
Dia.
Package
Quantity
for 3/16" Shank Bit
for 5mm Shank Bit
for 1/4" Shank Bit
145710
145711
145712
3/16" 17.5mm 10
6mm 17.5mm 10
7mm 19mm 10
Use
For most 0 & 00 bits
Reduced Dia. Bits
Standard Bits
Accessories
1.12
Special Bits
When ordering special extended bits,
we need the specific information below
to provide a quote.
A/F inches
1/4
Hex
A/F inches
1/4
Hex
L1
L2
L1
HEX BITS or BLADES
AMERICAN
METRIC
A/F inches
1/4
Hex
L2
L1
L2
BALL POINT BITS or BLADES
AMERICAN
METRIC
SPLINE BITS or BLADES
AMERICAN
A/F
L2 (max.)
A/F
L2 (max.)
A/F
L2 (max.)
A/F
L2 (max.)
A/F
L2 (max.)
Flutes
.05"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
1/4"
5/16"
3"
3 1/4"
3 1/2"
3 3/4"
7"
7 1/2"
8"
8 1/2"
9 1/4"
6"
7"
1.5mm
2mm
2.5mm
3mm
3.5mm
4mm
5mm
6mm
8mm
3 1/4"
4 3/4"
5 1/2"
7 1/4"
4 1/2"
8 1/4"
9 1/4"
10"
10 3/4"
.05"
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
1/4"
5/16"
3"
3 1/4"
3 1/2"
3 3/4"
7"
7 1/2"
8"
8 1/2"
9 1/4"
6"
7"
1.5mm
2mm
2.5mm
3mm
3.5mm
4mm
5mm
6mm
8mm
3 1/4"
4 3/4"
5 1/2"
7 1/4"
4 1/2"
8 1/4"
9 1/4"
10"
10 3/4"
.048"
.060"
.069"
.072"
.076"
.096"
.0111"
.145"
2.7"
2.7"
2.7"
2.7"
2.7"
2.7"
2.7"
4.5"
4
6
6
6
6
6
6
6
ORDERING SYSTEM
L1
A/F
L2
Length of Shank
Length of Blade
H for 1/4" Hex
(in inches)
(in inches)
L1
Length of Shank
H for 1/4" Hex
(in inches)
ORDERING SYSTEM
A/F
L2
Length of Blade
(in inches)
ORDERING SYSTEM
L1
L2
# of
Length of Shank
A/F
Flutes Length of Blade
H for 1/4" Hex
(in inches)
(in inches)
1H - 069 - 4 - 2.7 - SB
SB for Spline Bit
2H - 05 - 3.0 - HS
2H - 5/16 - 6.8 - BP
HS for Hex Standard
HM for Hex Metric
BP for Ball Point
NOTE!
Bits in excess of 4" long are
subject to bowing .
SPECIAL BITS
1.13
800.456.1828
Bit Holders
For use with ALL Drivers
SCREW CAP RETAINER
SCREW CAP RETAINER
C-RING RETAINER
(non-magnetic)
Length Item #
Diameter
Body Nose
(magnetic)
Length Item #
Drive
Diameter
Body Nose
(magnetic)
Length Item #
Drive
Body Dia.
3/8"
3/8"
3/8"
2 3/8"
2 7/8"
4"
5"
6"
11"
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
2 1/8"
2 7/8"
4"
6"
11"
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
1/4 Hex
3/8"
3/8"
3/8"
3/8"
3/8"
2 7/16"
4"
6"
Drive
120258 1/4 Hex
120301 1/4 Hex
120302 1/4 Hex
7/16"
7/16"
7/16"
120411
120241
120243
120244
120245
120248
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
Nutsetters
NON-MAGNETIC
1/4"
A
American
A
1/4" F/SQ. DR. to 1/4" F/HEX
BIT HOLDER 45MM
MAGNETIC
American
Item #125002
AUTOLOCK BIT HOLDER
60MM (NON-MAGNETIC)
Item #125001
Item #125006
Metric
AUTOLOCK BIT HOLDER
60MM (MAGNETIC)
Hex
Size “A”
Item #
Overall
Length
Socket Body
Diameter “B”
3/16"
1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
7/16"
5mm
6mm
7mm
8mm
10mm
128806
120430
120743
121037
120970
120431
120323
128810
126165
120256
128812
120746
128807
120705
120708
120706
120707
2"
1 5/8"
2 9/16"
4"
6"
1 5/8"
2 9/16"
3"
1 7/8"
2 9/16"
3"
2 9/16"
2 9/16"
1 5/8"
1 5/8"
1 5/8"
1 7/8"
5/16"
7/16"
7/16"
7/16"
7/16"
1/2"
1/2"
1/2"
9/16"
9/16"
9/16"
5/8"
1/4"
1/4"
7/16"
1/2"
9/16"
Metric
B
120999
120242
120470
120471
120472
Hex
Size “A”
Item #
Overall
Length
Socket Body
Diameter “B”
3/16"
3/16"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
11/32"
11/32"
3/8"
3/8"
3/8"
7/16"
7/16"
7/16"
1/2"
1/2"
4mm
5mm
120007
120008
120262
120740
120808
120263
120741
128102
128103
120887
128106
128112
128113
120264
128122
120742
120322
128143
120592
120052
128163
120880
120840
2"
3"
1 5/8"
2 9/16"
3"
1 5/8"
2 9/16"
2"
3"
4"
6"
2"
3"
1 7/8"
2"
2 9/16"
2"
3"
6"
2"
3"
2 9/16"
2 9/16"
5/16"
5/16"
7/16"
7/16"
7/16"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
9/16"
9/16"
9/16"
9/16"
9/16"
21/32"
21/32"
21/32"
3/4"
3/4"
11/32"
11/32"
Bit Holders
& Nut Setters
1.14
TORXALIGN®
WEDGE
Power Bits
A
Overall Length 115/16"
B
Drive Size Item #
POZIDRIVE®
Drive
Size
115/16" OL
Item # PQ*
23/4" OL
Item # PQ*
3" OL
Item # PQ*
31/2" OL
Item # PQ*
6" OL
Item # PQ*
A"
O-PZD
1-PZD
2-PZD
3-PZD
122512
120162
120163
120164
120335
120189
120579
120337 10
120947 5
120599
120582
120207
120334
120359
120331
1/8
3/16
1/4
1/4
10
10
10
5
10
10
5
*OL = Overall Length
BALLPOINT
American
1
1
1
*PQ = Package Quantity
TORX®
Hex Size
Item #
Cap Screw Size Set Screw Size
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
7/32"
1/4"
5/16"
3/8"
1/2"
2mm
2.5mm
3mm
4mm
5mm
6mm
8mm
10mm
12mm
120013
120014
120015
120016
120018
120019
120017
120020
120021
120011
120869
120001
120626
120627
120628
120629
120630
120631
120632
120633
120635
2-3
4-5
6
8
10
1/4
5/16
3/8
7/16, 1/2
5/8
M2.5
M3
M4
M5
M6
M8
M10
M12
M14
8
10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
M4
M5
M6
M8
M10
M12
M16
M18 / M20
M22 / M24
B"
Package
Quantity
.187
.187
.187
.187
.187
.187
.187
.187
.25
.25
.065
.077
.090
.097
.107
.128
.151
.173
.195
.216
1
1
1
1
1
1
1
1
1
1
A" (Dia.)
Overall Length 3"/ 76mm
(hex)
Metric
10
10
5
120510
120511
120512
120513
120514
120350
120515
120516
120517
120518
T-6
T-7
T-8
T-9
T-10
T-15
T-20
T-25
T-27
T-30
A" (Dia.)
A"
B
Package
Quantity
Drive
Size
115/16" OL
Item # PQ*
23/4" OL
Item # PQ*
31/2" OL
Item # PQ*
6" OL
Item # PQ*
A"
B"
10
10
5
5
10
10
10
10
5
1
1
1
5
5
5
5
5
5
1
1
1
T-1
T-2
T-3
T-4
T-5
T-6
T-7
T-8
T-9
T-10
T-15
T-20
T-25
T-27
T-30
T-40
126059
126060
126053
126054
121463
121469
120002
120288
120457
120440
120458
120459
120460
120461
120462
122017
122018
120344
120338
121026
120190
120358
120330
120332
120948
120751
-
122032
120508
120341
120507
120870
120352
120349
120764
120755
-
122047
120556
120506
120502
120724
120558
120216
120222
120720
120721
120722
120723
.098
.098
.098
.098
.125
.125
.125
.125
.125
.156
.156
.187
.187
.25
.25
.296
.033
.037
.044
.051
.055
.065
.077
.090
.097
.107
.128
.151
.173
.195
.216
.260
1
1
1
1
1
1
1
1
1
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
-
1
5
1
1
5
1
1
1
1
-
1
1
1
1
1
1
1
1
1
1
1
1
POWER BITS
1.15
800.456.1828
SLOTTED
TORX-SET®
Overall Length
Screw Size
TS1-2
TS1-4
TS1-8
Item #
120553
120555
121477
11/4"
A" (Dia.)
B" (approx. blade thickness)
Package
Quantity
Screw
Size
115/16" OL
23/4" OL
3" OL
Item# PQ* Item # PQ* Item # PQ*
31/2" OL
Item # PQ*
4" OL
6" OL
Item # PQ* Item # PQ*
A"
B"
1
1
5
1F-2R
2F-3R
3F-4R
4F-5R
5F-6R
6F-7R
8F-10R
10F-12R
12F-14R
120175
120176
120177
120178
120179
120180
120181
120182
120183
120734
120483
120284
120203
120285
120474
120208
120594
120475
120485
123319
120306
120304
120580
120581
120946
120608
.122
.134
.154
.187
.215
.25
.275
.312
.360
.026
.03
.034
.036
.038
.04
.042
.046
.05
10
10
10
10
10
10
10
10
5
120730
120223
120405
120409
120406
120731
120732
120733
5
5
5
5
5
10
5
5
120224
120192
123321
120194
120195
120196
120197
120198
120199
5
5
1
5
5
5
5
5
5
PHILLIPS
5
10
10
10
120831
120186
120187
120188
5
10
120200 10
10
120201 10
10
120202 10
Point
Size
Screw
Size
Flat Oval Binding
O
1
2
3
0-1
2-3-4
5-6-7-8-10
12-14
0-1
2-3-4
5-6-7-8-10
12-14
120006 5
120210
120204 10
120211
120205 10
120212
120206 10
Machine Screws
Round Fillster
0-1
2-3-4
5-6-7-8-10
12-14-15-16
10
10
10
124916
120214
120215
120437
1
5
5
5
Truss-Brazier Button
A"
0-1
2-3-4-5
6-8-10
12-14
1/8
3/16
1/4
1/4
American
120005
120159
120160
120161
4" OL
6" OL
Item # PQ* Item # PQ*
Metric
O
1
2
3
(allen type)
31/2" OL
Item # PQ*
1
5
1
5
5
5
5
5
1
120217
120420
120433
120290
120545
120435
120436
120532
120736
1
1
1
1
1
1
1
1
1
SOCKET HEAD
A" (Dia.)
115/16" OL
23/4" OL
3" OL
Point
Size Item# PQ* Item # PQ* Item # PQ*
5
5
5
5
5
5
5
5
Overall Length 115/16"/ 49mm
Hex
Size
Item #
Cap Screw Size
Package
Set Screw Size Quantity
1/16"
5/64"
3/32"
7/64"
1/8"
9/64"
5/32"
3/16"
1/4"
5/16"
1.5mm
2mm
2.5mm
3mm
4mm
5mm
6mm
8mm
120165
120166
120167
120218
120169
120170
120171
120172
120174
129808
120777
120778
120796
120797
120848
120841
120348
120849
1
2-3
4-5
6
8
10
1/4
5/16
5/8
M1.6 / M2
M2.3 / M2.5 / M2.6
M3
M4
M5
M6
M8
M10
5-6
8
10
1/4
5/16
3/8
1/2
5/8
M3
M4
M5
M6
M8
M10
M12
M16
5
1
5
5
5
5
5
5
5
1
1
1
1
1
1
1
1
1
POWER BITS
1.16
In-Line
Pulse Tools
Auto Shut-Off & Non Shut-Off
KEY FEATURES
Various models that range from 5 - 47 N.m
Designed to enhance cycle time with high-speed rundown.
Excellent power-to-weight ratio.
Safe ergonomic selection - low noise decibels, minimal vibration & reaction free
operation.
Comfortable rubberized non-slip grips for easy handling and excellent thermal
ergonomics.
Specially designed pulse fluid extends life between oil changes - provides better
stability. Double sealing increases performance - reduces maintenance.
Shut-off and non shut-off models.
Ergonomically safer than harmful hammering and vibration of impact wrenches.
Widest ranged pulse tool on market for easy tool specification.
NOTE!
Sleeve drive sockets should be used with impact or pulse tools that
accept an extended shaft sleeve type socket. Sleeve drive sockets
provide more stability and prevent wobble and distortion. Contact
Mountz for a sample or demonstration so you can see and feel the
difference of a sleeve drive socket.
All specified torque ranges were established statically on a Mountz
(TorqueLab LTT Series) torque meter at a dynamic air pressure
of 70 and 85 PSI (LBS per Square Inch). The specified results
should be used as guidance only in tool selection. In general, the
torque range will be lower based on type of joint, air pressure,
extension bars and/or extended sockets. A pulse tool is a discontinuous
tool and added adapters or extensions create a dampening effect,
thus lowering torque values. Tool selection as well as set up is
recommended to be validated on the actual joint by use of a suitable
calibrated torque wrench. We recommend a quality Mountz Digital
torque wrench.
AUTO SHUT-OFF
NON SHUT-OFF
Model
Item #
Model
Item #
Drive
Type
FLEXS-30SX
FLEXS-40SX
FLEXS-40S
FLEXS-50SX
FLEXS-50S
FLEXS-60SX
FLEXS-60S
FLEXS-70S
360122
360123
360124
360125
360126
360127
360128
360129
FLEX-30SX
FLEX-40SX
FLEX-40S
FLEX-50SX
FLEX-50S
FLEX-60SX
FLEX-60S
FLEX-70S
360130
360131
360132
360133
360134
360135
360136
360137
1/4" F/Hex
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
3/8" Sq Dr
AUTO SHUT-OFF
NON SHUT-OFF
Model
Model
Weight
lbs.
Kgs.
FLEXS-30SX
FLEXS-40SX
FLEXS-40S
FLEXS-50SX
FLEXS-50S
FLEXS-60SX
FLEXS-60S
FLEXS-70S
FLEX-30SX
FLEX-40SX
FLEX-40S
FLEX-50SX
FLEX-50S
FLEX-60SX
FLEX-60S
FLEX-70S
1.69
1.76
1.76
1.76
1.76
1.89
1.89
2.13
0.76
0.80
0.80
0.80
0.80
0.85
0.85
0.96
Torque (N.m)
5kg/cm2 @70 psi
Min.
Max.
5
9
10
12
13
18
20
28
Free Speed (RPM)
5kg/cm2 6kg/cm2
@70 psi @85 psi
Torque (N.m)
6kg/cm2 @85 psi
Min.
Max.
11.5
17
17
24
25
28
33
42
6
10
11
14
15
20
22
31
3900
3900
3900
6900
6900
5700
5700
4700
12.5
18
19
26
27
30
35
47
4200
4200
4200
7200
7200
6000
6000
5000
P/W Ratio
Nm/Kgs.
Length
in.
Noise Level
dBA
Average Air Consumption
m3/min.
ft3/min.
CFM
CFM
Hose
Size mm
16.4
22.5
23.8
32.5
33.8
35.3
41.2
49.0
8.8
8.8
8.7
8.8
8.7
9.2
9.1
9.5
78.0
78.0
78.0
80.0
80.0
80.0
80.0
80.0
0.25
0.25
0.25
0.35
0.35
0.40
0.40
0.40
6.5
6.5
6.5
6.5
6.5
8
8
8
8.80
8.70
8.80
12.30
12.30
14.10
14.10
14.10
In-Line Pulse
1.18
800.456.1828
Pistol
Pulse Tools
KEY FEATURES
Various models that range from 5 - 148 N.m
Safe ergonomic selection - low noise decibels, minimal vibration
& reaction free operation.
Comfortable rubberized non-slip grips for easy handling and
excellent thermal ergonomics.
Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance.
Ergonomically safer than harmful hammering and vibration of
impact wrenches.
AUTO SHUT-OFF
NON SHUT-OFF
Model
Item #
Model
Item #
Drive
Type
FLEXS-30PX
FLEXS-40PX
FLEXS-40P
FLEXS-50PX
FLEXS-50P
FLEXS-60PX
FLEXS-60P
FLEXS-70P
FLEXS-90P
FLEXS-100P
FLEXS-130P
360100
360101
360102
360103
360104
360105
360106
360107
360108
360109
360110
FLEX-30PX
FLEX-40PX
FLEX-40P
FLEX-50PX
FLEX-50P
FLEX-60PX
FLEX-60P
FLEX-70P
FLEX-90P
FLEX-100P
FLEX-130P
360111
360112
360113
360114
360115
360116
360117
360118
360119
360120
360121
1/4" F/Hex
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
3/8" Sq Dr
1/2" Sq Dr
1/2" Sq Dr
1/2" Sq Dr
AUTO
SHUT-OFF
NON
SHUT-OFF
Model
Model
Weight
lbs.
Kgs.
P/W Ratio
Nm/Kgs.
Length
in.
Noise
Level
dBA
FLEXS-30PX
FLEXS-40PX
FLEXS-40P
FLEXS-50PX
FLEXS-50P
FLEXS-60PX
FLEXS-60P
FLEXS-70P
FLEXS-90P
FLEXS-100P
FLEXS-130P
FLEX-30PX
FLEX-40PX
FLEX-40P
FLEX-50PX
FLEX-50P
FLEX-60PX
FLEX-60P
FLEX-70P
FLEX-90P
FLEX-100P
FLEX-130P
2.0
2.0
2.0
2.0
2.0
2.2
2.2
3.0
3.4
4.1
5.0
14.2
19.8
20.9
28.6
29.7
30.0
38.5
42.3
58.1
64.6
65.8
6.7
6.7
6.6
6.7
6.6
7.1
7.0
7.6
7.9
8.2
8.5
78.0
78.0
78.0
80.0
80.0
82.0
82.0
82.0
83.0
84.0
86.0
0.88
0.91
0.91
0.91
0.91
1.00
0.91
1.35
1.55
1.86
2.25
Pistol Pulse
1.19
800.456.1828
Torque (N.m)
5kg/cm2 @70 psi
Min.
Max.
5
9
10
12
13
18
20
34
57
75
113
Torque (N.m)
6kg/cm2 @85 psi
Min.
Max.
11.5
17
18
24
25
28
33
53
83
105
138
6
10
11
14
15
20
22
37
64
85
123
Average Air
Consumption
m3/min. ft3/min.
CFM
CFM
Hose
Size mm
0.25
0.25
0.25
0.35
0.35
0.40
0.40
0.45
0.53
0.55
0.73
6.5
6.5
6.5
6.5
6.5
8
8
8
8
8
11
8.80
8.80
8.80
12.30
12.30
14.10
14.10
15.90
18.70
19.40
25.60
12.5
18
19
26
27
30
35
57
90
120
148
Free Speed (RPM)
5kg/cm2 6kg/cm2
@70 psi @85 psi
4100
4100
4100
6800
6800
5900
5900
6900
5000
5000
3300
4400
4400
4400
7200
7200
6200
6200
7200
5400
5300
3600
NOTE!
Sleeve drive sockets should be used with impact
or pulse tools that accept an extended shaft sleeve
type socket. Sleeve drive sockets provide more
stability and prevent wobble and distortion. Contact
Mountz for a sample or demonstration so you
can see and feel the difference of a sleeve drive
socket.
All specified torque ranges were established
statically on a Mountz (TorqueLab LTT Series)
torque meter at a dynamic air pressure of 70 and
85 PSI (LBS per Square Inch). The specified
results should be used as guidance only in tool
selection. In general, the torque range will be
lower based on type of joint, air pressure, extension
bars and/or extended sockets. A pulse tool is a
discontinuous tool and added adapters or extensions
create a dampening effect, thus lowering torque
values. Tool selection as well as set up is
recommended to be validated on the actual joint
by use of a suitable calibrated torque wrench.
We recommend a quality Mountz Digital torque
wrench.
Right-Angle
Pulse Tools
KEY FEATURES
Various models that range from 8.5 - 60 N.m
Safe ergonomic selection - low noise decibels, minimal vibration & reaction free
operation.
Comfortable rubberized non-slip grips for easy handling and excellent thermal
ergonomics.
Specially designed pulse fluid extends life between oil changes - provides better
stability. Double sealing increases performance - reduces maintenance.
Ergonomically safer than harmful hammering and vibration of impact wrenches.
NOTE!
Right Angle Pulse tools should use Standard Impact Sockets.
All specified torque ranges were established statically on a Mountz
(TorqueLab LTT Series) torque meter at a dynamic air pressure
of 70 and 85 PSI (LBS per Square Inch). The specified results
should be used as guidance only in tool selection. In general, the
torque range will be lower based on type of joint, air pressure,
extension bars and/or extended sockets. A pulse tool is a discontinuous
tool and added adapters or extensions create a dampening effect,
thus lowering torque values. Tool selection as well as set up is
recommended to be validated on the actual joint by use of a suitable
calibrated torque wrench. We recommend a quality Mountz Digital
torque wrench.
AUTO SHUT-OFF
NON SHUT-OFF
Model
Item #
Model
Item #
Drive
Type
FLEXS-50RX
FLEXS-50R
FLEXS-60RX
FLEXS-60R
FLEXS-70RX
FLEXS-70R
FLEXS-70RH
360145
360138
360146
360139
360147
360140
360144
FLEX-50RX
FLEX-50R
FLEX-60RX
FLEX-60R
FLEX-70RX
FLEX-70R
FLEX-70RH
360148
360141
360149
360142
360150
360143
360151
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
1/4" F/Hex
3/8" Sq Dr
1/2" Sq Dr
AUTO SHUT-OFF
NON SHUT-OFF
Model
Model
Weight
lbs.
Kgs.
FLEXS-50RX
FLEXS-50R
FLEXS-60RX
FLEXS-60R
FLEXS-70RX
FLEXS-70R
FLEXS-70RH
FLEX-50RX
FLEX-50R
FLEX-60RX
FLEX-60R
FLEX-70RX
FLEX-70R
FLEX-70RH
2.6
2.6
2.9
2.9
3.1
3.1
3.5
1.2
1.2
1.3
1.3
1.4
1.4
1.6
Torque (N.m)
5kg/cm2 @70 psi
Min.
Max.
Torque (N.m)
6kg/cm2 @85 psi
Min.
Max.
Free Speed (RPM)
5kg/cm2 6kg/cm2
@70 psi @85 psi
8.5
9.5
12.5
14
18
20
40
9.5
10.5
13.5
15
20
22
46
4000
4000
5000
5000
4200
4200
2000
14
15
20
22
26
29
55
16
17
22
24
29
31
60
4300
4300
5300
5300
4500
4500
2200
P/W Ratio
Nm/Kgs.
Length
in.
Noise Level
dBA
Average Air Consumption
m3/min.
ft3/min.
CFM
CFM
Hose
Size mm
13.3
14.2
16.9
18.5
20.7
22.1
37.5
10.0
10.0
10.4
10.4
10.7
10.7
11.1
80.0
80.0
80.0
80.0
80.0
80.0
82.0
0.32
0.32
0.40
0.40
0.40
0.40
0.40
6.5
6.5
8
8
8
8
8
11.30
11.30
14.10
14.10
14.10
14.10
14.10
Right-Angle
Pulse
1.20
800.456.1828
Sleeve Drive
Impact Sockets
Impact & Pulse Tools
KEY FEATURES
Sleeve drive sockets provide stability and prevent wobble and distortion.
Less vibration reduces wear on the critical components of the pulse tool.
Sleeve drive sockets should be used with an impact or pulse tool that
accepts extended shaft sleeve type sockets.
3/8" Sq. Dr. (6 Point Sockets)
AMERICAN
D2
D1
L2
Size
Item #
mm
mm
mm
L
mm
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
272500
272501
272502
272503
272504
272505
272506
272507
272508
272509
272510
272511
272512
272513
19
19
19
19
22
22
22
22
22
22
23
23
23
23
11
13
15
17.5
20
21
24
25
27
30
31
34
36
38
5
6
7
8
9
9
12
12
12
13
14
15
15
15
43
43
43
43
43
43
43
43
43
43
50
50
50
50
METRIC
D2
D1
L2
Size
Item #
mm
mm
mm
L
mm
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
272514
272515
272516
272517
272518
272519
272520
272521
272522
272523
272524
272525
272526
272527
272528
272529
272530
272531
272532
272533
272534
272535
19
19
19
19
19
19
19
22
22
22
22
22
22
22
22
22
23
23
23
23
23
23
11
12
13
15
16
17.5
18.5
20
21
22
24
25
26
27
28
30
31
32
34
35
36
38
5
5
7
7
7
8
9
9
9
12
12
12
12
12
13
13
14
14
15
15
15
15
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
43
50
50
50
50
50
50
AMERICAN
D2
D1
L2
Size
Item #
mm
mm
mm
L
mm
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
11/16"
3/4"
13/16"
7/8"
15/16"
1"
1-1/16"
1-1/8"
1-3/16"
1-1/4"
1-5/16"
1-3/8"
1-7/16"
1-1/2"
272536
272537
272538
272539
272540
272541
272542
272543
272544
272545
272546
272547
272548
272549
272550
272551
272552
272553
272554
272555
272556
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
30
30
38
13
15
17.5
18.5
21
22.5
25
27.5
28.5
31
32
35
38
38.5
41
42
44
46
50
52
54
6
9
12
12
12
12
12
13
13
14
14
15
17
17
18
18
20
20
21
22
23
52
52
52
52
52
52
52
52
52
52
52
52
57
57
57
57
62
62
62
62
65
NOTE!
Sleeve sockets also available in extended lengths
with and without magnet, hex bit, Torx®,
External Torx®, stud setter and quick release
chuck types. Please inquire for sizes and
availability.
6 Point Socket
Extension Bar
METRIC
D2
D1
L2
Size
Item #
mm
mm
mm
L
mm
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
38
272557
272558
272559
272560
272561
272562
272563
272564
272565
272566
272567
272568
272569
272570
272571
272572
272573
272574
272575
272576
272577
272578
272579
272580
272581
272582
272583
272584
272585
272586
272587
272588
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
38
13
14
15
16
17.5
18.5
20
21
22.5
23.5
25
26
27.5
28.5
30
31
32
34
35
36
38
38.5
40
41
42
43
44
46
48
50
52
54
6
7
9
12
12
12
12
12
12
12
12
13
13
13
14
14
14
14
15
15
17
17
17
18
18
18
20
20
21
21
22
23
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
57
57
57
57
57
57
57
62
62
62
62
62
65
Extension Bars
Input
Drive
Item #
Output
Drive
D2
mm
L
mm
Male End
Type
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
272589
272590
272591
272592
272593
272594
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
22
22
22
25
25
25
75
100
150
75
100
150
Pin Hole
Pin Hole
Pin Hole
Pin Hole
Pin Hole
Pin Hole
Sleeve Drive
Impact Sockets
1.21
800.456.1828
Pulse Tool Reference Guide
PULSE TOOL SELECTION REFERENCE GUIDE - BOLT SIZE
AUTO
NON
SHUTOFF
SHUTOFF
Model
Model
FLEXS-40P
FLEXS-50P
FLEXS-60P
FLEXS-70P
FLEXS-90P
FLEXS-100P
FLEXS-130P
FLEXS-30PX
FLEXS-40PX
FLEXS-50PX
FLEXS-60PX
FLEXS-40S
FLEXS-50S
FLEXS-60S
FLEXS-70S
FLEXS-30SX
FLEXS-40SX
FLEXS-50SX
FLEXS-60SX
FLEXS-50R
FLEXS-60R
FLEXS-70R
FLEXS-70RH
FLEXS-50RX
FLEXS-60RX
FLEXS-70RX
FLEX-40P
FLEX-50P
FLEX-60P
FLEX-70P
FLEX-90P
FLEX-100P
FLEX-130P
FLEX-30PX
FLEX-40PX
FLEX-50PX
FLEX-60PX
FLEX-40S
FLEX-50S
FLEX-60S
FLEX-70S
FLEX-30SX
FLEX-40SX
FLEX-50SX
FLEX-60SX
FLEX-50R
FLEX-60R
FLEX-70R
FLEX-70RH
FLEX-50RX
FLEX-60RX
FLEX-70RX
M5
M6
10NM
M8
M10
M12
M14
19NM
13NM
27NM
20NM
35NM
34NM
57NM
57NM
90NM
120NM
75NM
135NM
5NM
148NM
12.5NM
9NM
18NM
12NM
26NM
30NM
18NM
19NM
10NM
13NM
27NM
20NM
35NM
34NM
5NM
57NM
12.5NM
9NM
18NM
12NM
26NM
30NM
18NM
17NM
9.5NM
14NM
24NM
20NM
31NM
40NM
8.5NM
HARD JOINT APPLICATIONS
The auto shut-off pulse tools normally reach 85%
of the maximum torque listed in the torque range.
The non shut-off pulse tools normally reach 95%
60NM
16NM
12NM
22NM
40NM
USE THE PROPER
PRESSURE
70
PSI
60NM
ACCESSORIES
85
PSI
SOFT JOINT APPLICATIONS
The auto shut-off pulse tools normally reach 70%
The non shut-off pulse tools normally reach 90%
SELECTION NOTES
All specified torque ranges were established statically on a
Mountz (TorqueLab® LTT Series) torque meter at a dynamic air
pressure of 70 and 85 PSI (LBS per Square Inch). The specified
results should be used as guidance only in tool in tool selection.
In general, the torque range will be lower based on type of joint,
air pressure, extension bars and/or extended sockets. A pulse tool
is a discontinuous tool and added adapters or extensions create a
dampening effect, thus lowering torque values. Tool selection as
well as set up is recommended to be validated on the actual joint
by use of a suitable calibrated torque wrench. We recommend a
quality Mountz Digital torque wrench.
Sleeve Drive Impact Sockets (except for Right Angle models)
See Page 1.21
CALIBRATION METHOD RECOMMENDED
The range vary according to joint specification. Recommended
use static torque tester LTT or PTT with BMX and measure the
residual torque with a Mountz Digital Torque Wrench to validate
the calibration procedure.
Pulse Tool
Reference Guide
1.22
Ask a Mountz customer service representative
for a copy of our otrher Catalogs.
ASSEMBLY POWER TOOL
CATALOG - MC14
Available in Print or PDF format, 76 page
CORPORATE HEADQUARTERS
1080 North 11th Street
San Jose CA 95112
t 408.292.2214
t 800.456.1828
f 408.292.2733
e-mail sales@etorque.com
www.etorque.com
DISTRIBUTION & SERVICE CENTER
19051 Underwood Road
Foley AL 36535
t 251.943.4125
f 251.943.4979
US & CANADA SALES OFFICES
TORQUE ANALYZER & TEST
MEASUREMENT CATALOG - MC14
Anaheim, Boston, Charlotte, Chicago, Cleveland,
Dallas, El Paso, Los Angeles, Minneapolis, Nashville,
Phoenix, Seattle, San Jose, Toronto
Available in Print or PDF format, 24 page
MOUNTZ MEXICO SA de CV
MAIN OFFICE & SERVICE CENTER
Av. Cristobal Colon #15343
Col. Paseos de Chihuahua
Chihuahua, Chih. Mexico CP 31125
t 614.481.0023
f 614.481.0053
MEXICO SALES OFFICES
Tijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey,
Mexico DF, Guadalajara
TORQUE MULTIPLIER
CATALOG - MC14
Available in PDF format only, 24 page

Mountz Air Torque Screwdrivers Catalog

Transcription

Similar documents

JAPAN Mint Stamp Price List in Adobe Acrobat Format

Screwdrivers