Table of contents - CORDIS

Transcription

PROJECT SYNOPSIS
For each project, there is a summary of the objectives and contents, the state of the progress, the starting
date and duration, the budget, the funding, and the partners including their contact details.
KI-30-08-691-EN-C
This synopsis describes the Research Fund for Coal and Steel projects co-financed under the Research
Fund for Coal and Steel programme, covering the period 2005-2008.
2005-2008
synopsis.qxd:RFCS2_montage.qxd
24/10/08
8:40
Page 2
Interested in European research?
European Commission
Research* eu is our monthly magazine keeping you in touch with main developments (results, programmes, events, etc.).
It is available in English, French, German and Spanish. A free sample copy or free subscription can be obtained from:
Synopsis of the coal & steel projects co-financed by the RFCS 2005-2008
European Commission
Directorate-General for Research
Communication Unit
B-1049 Brussels
Fax (32-2) 29-58220
E-mail: research-eu@ec.europa.eu
Internet: http://ec.europa.eu/research/research-eu
The data of this synopsis were collected in September 2008.
EUROPEAN COMMISSION
Directorate-General for Research
Directorate Energy
Research Fund for Coal and Steel Unit
B-1049 Brussels
E-mail: rtd-steel-coal@ec.europa.eu
Website: http://cordis.europa.eu/coal-steel-rtd
2008 —271 pp. — 21.0 x 29.7 cm
ISBN: 978-92-79-09856-7
DOI: 10.2777/13876
Table of contents
Introduction
5
Summary tables
7
Coal projects by technical groups
TGC 1 Coal mining operation, mine infrastructure and management, unconventional
use of coal deposits
TGC 2 Coal preparation, conversion and upgrading
TGC 3 Coal combustion, clean and efficient coal technologies, CO2 capture
Steel projects by technical groups
TGS 1 Ore agglomeration and iron making
TGS 2 Steelmaking processes
TGS 3 Casting, reheating and direct rolling
TGS 4 Hot and cold rolling processes
TGS 5 Finishing and coating
TGS 6 Physical metallurgy and design of new generic steel grades
TGS 7 Steel products and applications for automobiles, packaging and
home appliances
TGS 8 Steel products and applications for building, construction and industry
TGS 9 Factory-wide control, social and environmental issues
3
9
28
41
63
74
96
114
138
152
183
196
247
4
Introduction
Building on the exceptional success of the research programmes of the European Coal and
Steel Community (ECSC) and the assets left (€1600 Million) at the expiry of the ECSC Treaty
in 2002, a Research Fund for Coal and Steel (RFCS) was set up on 1st February 2003∗. The
multiannual technical guidelines of the programme were last updated on 29th April 2008†.
The budget of the Fund is generated by the yearly interests produced by these assets.
Typically these amount to about €60 Million/year of which 27.2% and 72.8% are respectively
earmarked for coal and steel.
The RFCS is definitely an industrial programme which supports research and pilot projects
and supplements the Framework Programme.
An Information Package is available to help programme participants understand the
procedures for proposal preparation and submission, project monitoring and project
reporting. Paper copies can be requested from rtd-steel-coal@ec.europa.eu
The electronic version of the Information package and all programme related documents are
available from the RFCS website: http://cordis.europa.eu/coal-steel-rtd
Final reports of the projects are available online free of charge from the EU Bookshop
http://bookshop.europa.eu. They can also be purchased from the sales agent of the
Publications Office. More detailed information on:
http://publications.europa.eu/.
This synopsis also contains proposals which have been selected for funding in 2008.
∗
Council Decision 2003/76/EC, 2003/77/EC, 2003/78/EC of 1st February 2003.
†
Council Decision 2008/376/EC of 29 April 2008.
5
6
Summary tables
Distribution of RFCS projects by technical group (2005-2008)
Technical group
TGC 1
TGC 2
TGC 3
TGS 1
TGS 2
TGS 3
TGS 4
TGS 5
TGS 6
TGS 7
TGS 8
TGS 9
Coal mining operation, mine infrastructure
and management, unconventional use of
coal deposits
Coal preparation, conversion and upgrading
Coal combustion, clean and efficient coal
technologies, CO2 capture
Number
of
projects
Number of
partners
Average
partners
/projects
Budget (€)
RFCS funding
(€)
RFCS
funding
(%)
Average
funding/
project (€)
13
94
7,2
38.852.583
23.311.551
40%
1.793.196
9
62
6,9
19.638.559
11.752.535
20%
1.305.837
17
109
6,4
42.189.586
23.023.674
40%
1.354.334
Total Coal
Ore agglomeration and iron making
39
265
6,8
100.680.728
58.087.760
100%
1.489.430
8
54
6,8
20.326.727
10.848.426
7%
1.356.053
Steelmaking processes
Casting, reheating and direct rolling
Hot and cold rolling processes
Finishing and coating
Physical metallurgy and design of new
generic steel grades
Steel products and applications for
automobiles, packaging and home
appliances
Steel products and applications for building,
construction and industry
Factory-wide control, social and
environmental issues
21
102
4,9
29.137.847
17.277.467
11%
822.737
16
88
5,5
29.220.914
17.238.971
11%
1.077.436
23
118
5,1
38.067.479
21.693.023
14%
943.175
13
65
5,0
19.428.342
11.346.047
7%
872.773
28
147
5,3
39.650.943
23.520.852
15%
840.030
10
61
6,1
14.398.551
8.639.223
6%
863.922
41
267
6,5
44.353.544
26.626.223
17%
649.420
21
118
5,6
28.880.008
16.121.293
11%
767.681
Total Steel
181
1020
5,6
263.464.355
153.311.525
100%
847.025
Total Coal+Steel
220
1285
5,8
364.145.083
211.399.285
7
-
960.906
Distribution of RFCS projects by instrument (2005-2008)
Instrument
Number of
projects
Average
partners/
projects
Number of
partners
Budget (€)
RFCS
funding (€)
RFCS
funding
(%)
Average funding/
project (€)
Accompanying Measures
19
93
4,9
6.305.470
3.482.352
2%
183.282
Pilot & Demonstration
14
65
4,6
28.991.207
10.853.348
5%
775.239
Research
187
1127
6,0
328.848.406
197.063.585
93%
1.053.816
Total
220
1285
5,8
364.145.083
211.399.285
100%
960.906
8
Synopsis of the RFCS projects 2005 - 2008
Technical Group TGC1 :"Coal mining operation, mine infrastructure and management,
unconventional use of coal deposits"
Contract N°
RFCR-CT-2005-00001
Reference N°
TGC1.1/05
Budget (€) Funding (€)
3.228.216 1.936.930
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Advances in exploration methods and applications
Acronym ADEMA
:
OBJECTIVES AND CONTENTS
“ADEMA” is a cohesive, ambitious programme that is designed to address deficiencies in underground exploration and geological definition.
An interdisciplinary approach is a key feature, with significant innovations sought in seismic interpretation and validation, coal seam radio imaging,
microseismic
monitoring and drill/core parameter use.
The programme has a strong application focus and will secure significant production cost and safety benefits.
The research is targeted deliberately at improving critical geological knowledge in a range of situations; coal mine business risk control, geological
repository
definition for carbon storage schemes, underground coal gasification well drilling activities, and in enhanced coalbed methane recovery schemes.
State of progress:
Research in progress
Partners
(CO)
UK COAL
Responsible: Mr John WILSON
Organisation: UK COAL
Direct line: +(44) 1302/755 231
Direct fax: +(44) 1302/746 550
UK COAL MINING LTD
e-mail: jwilson@ukcoal.com
Department: Geology Department
Address: Blyth Road, Harworth Park,
Harworth
GB- DONCASTER DN11 8DB
(P)
GIG
Responsible: Dr. Adam LURKA
Organisation: GIG
Direct line: +(48) 32/259 2575
Direct fax: +(48) 32/259 6533
GLOWNY INSTYTUT GORNICTWA
e-mail: a.lurka@gig.katowice.pl
Department: Laboratory of Seismology and Mining Seismic
Address: Pl. Gwarkow 1
PL-40166 KATOWICE
(P)
GEOCONTROL
Responsible: Dr. José Miguel GALERA
Organisation: GEOCONTROL
Direct line: +(34) 91/553 17 63
Direct fax: +(34) 91/554 93 96
GEOCONTROL S.A.
e-mail: jmgalera@geocontrol.es
Address: Cristobal Bordiu 19
ES-28003 MADRID
(P)
HERIOT-WATT UNIVERS
Responsible: Prof. Brian SMART
Organisation: HERIOT-WATT UNIVERSITY
Direct line: +(44) 131/451 3128
Direct fax: +(44) 131/451 3127
HERIOT-WATT UNIVERSITY
e-mail: brian.smart@pet.hw.ac.uk
Department: Rock Mechanics Laboratory
Address: Riccarton Campus
GB- EDINBURGH EH14 4AS
9
(P)
MRSL
Responsible: Mr David BRENKLEY
Direct line: +(44) 1623/423 777
Organisation: MRSL
Direct fax: +(44) 1623/638 500
MINES RESCUE SERVICE LTD
e-mail: brenkley@btinternet.com;
david.brenkley@minesrescue.com
Address: Stations Leeming Lane South
Mansfield Woodhouse
GB- MANSFIELD NOTTINGHAMSHIRE NG19
9AQ
(P)
TNO
Responsible: Drs. Henk PAGNIER
Direct line: +(31) 30/256 4600
Organisation: TNO-NITG
Direct fax: +(31) 30/256 4605
NETHERLANDS ORGANISATION FOR APPLIED
SCIENTIFIC RESEARCH, TNO-NITG
Address: Princetonlaan 6
e-mail: h.pagnier@nitg.tno.nl
NL-3584 UTRECHT CB
(P)
SIP
Responsible: Mrs. Beatrice McGLEN
Direct line: +(44) 1777/248187
Organisation: SIP
Direct fax: +(44) 1777/248187
SIP
e-mail: pasturefarm@supanet.com
Department: Onshore Processing Department
Address: Pasture Farm
Upton
GB- RETFORD DN22 0RA
Contract N°
RFCR-CT-2005-00002
Reference N°
TGC1.2/05
2.882.817 1.729.690
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Development of more economical innovative support systems for gateroads under the influence of rock stresses
Acronym MONSUPPORT
:
Focus is on improved monitoring of support systems. This can be achieved by joint research developing and testing monitoring systems under rock stress
and investigating the virtue of support.
Development and testing of new monitoring devices should be as close to practice as possible.
It will be combined with application of new means of support.
For immediate evaluation, online data transfer is required. Particularly during the first phase after driving, the effect of support measures will be monitored
by new suitable systems.
A common European format for recording and interpretation of monitoring data contributes to better competitiveness of European coal.
State of progress:
Partners
(CO)
DMT
Responsible: Dipl. Geol. Stephan PETERS
Organisation: DMT
Direct line: +(49) 201/172 1865
Direct fax: +(49) 201/172 1640
DMT GmbH & Co KG
e-mail: stephan.peters@dmt.de
Department: Engineering Geology in Mining
Address: Am Technologiepark 1
DE-45307 ESSEN
10
(P)
RMT
Responsible: Dr. David Norman BIGBY
Organisation: RMT
Direct line: +(44) 1283/522 201
Direct fax: +(44) 1283/522 279
ROCK MECHANICS TECHNOLOGY Ltd
e-mail: david.bigby@rmtltd.com
Department: Instruments & Research
Address: Ashby Road, Bretby Bussines Park
Stanhope Bretby
GB- SUTTON-IN-ASHFIELD DE15 0QD
(P)
DSK
Responsible: Dr. Nikolaos POLYSOS
Organisation: DSK
Direct line: +(49) 2323/15 2059
Direct fax: +(49) 2323/15 2343
DEUTSCHE STEINKOHLE A.G.
e-mail: nikolaos.polysos@deutsche-steinkohle.de
Department: Department ZTT-B
Address: Shamrockring 1
DE-44623 HERNE
(P)
GEOCONTROL
Direct line: +(34) 91/553 17 63
Direct fax: +(34) 91/554 93 96
GEOCONTROL S.A.
ES-28003 MADRID
(P)
UK COAL
Responsible: Mr David MOORE
Direct line: +(44) 1302/755 267
Direct fax: +(44) 1302/746 550
UK COAL MINING LTD
e-mail: dmoore@ukcoal.com
Department: Geotechnical Group
Harworth
(P)
GIG
Responsible: Dr. Stanislaw PRUSEK
Organisation: GIG
Direct line: +(48) 32/259 24 23
Direct fax: +(48) 32/258 44 25
e-mail: s.prusek@gig.katowice.pl
Department: Dept. of Extraction Technologies and Mining Support
PL-40166 KATOWICE
11
Contract N°
RFCR-CT-2005-00003
Reference N°
TGC2.1/05
3.275.993 1.965.597
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Researching the applications of innovative open wireless technologies
Acronym RAINOW
:
This proposal defines an ambitious, highly integrated programme of work to research, develop and exploit emerging technologies of open standard wireless
systems and autonomous ‘smart’ sensor networks in a range of critical underground applications.
The project will focus on basic research activities, the behaviour and application of low-powered open infrastructure wireless components, smart sensors
and radio frequency identification (RFID) devices.
Applications focus will include distributed monitoring systems, personnel location, materials tracking, integrated voice and data delivery, health monitoring
of mine workers and improvements to rescue communications.
The research addresses fundamental requirements for improved monitoring and operational efficiency in underground activities.
State of progress:
Partners
(CO)
DSK
Responsible: Mr Uwe POLLEI
Direct line: +(49) 2323/15 3098
Organisation: RAG
Fax: +(49)
RAG Aktiengesellschaft
e-mail: uwe.pollei@rag.de
DE-44623 HERNE
(P)
AITEMIN
Responsible: Mr Jorge DEL VALLE
Organisation: AITEMIN
Direct line: +(34) 91/442 59 55
Direct fax: +(34) 91/441 78 56
ASOCIACION PARA LA INVEST. Y EL DESAR.
INDUSTRIAL DE LOS RECURSOS NAT.
Address: Margarita Salas, 14
e-mail: j.delvalle@aitemin.es
Parque Leganés Tecnológico
ES-28919 LEGANES (MADRID)
(P)
DMT
Responsible: Dipl.Ing. Rainer RELLECKE
Organisation: DMT
Direct line: +(49) 201/172 1744
Direct fax: +(49) 201/172 1942
DMT GmbH & Co KG
e-mail: rainer.rellecke@dmt.de
DE-45307 ESSEN
(P)
EMAG
Responsible: Msc. Eng. Przemyslaw WISZNIOWSKI
Organisation: EMAG
Direct line: +(48) 32/200 78 35
Direct fax: +(48) 32/200 77 04
CENTRUM ELEKTRYFIKACJI I
AUTOMATYZACJI GORNICTWA
Address: ul. Leopolda 31
e-mail: p.wiszniowski@emag.pl
PL-40-189 KATOWICE
(P)
MRSL
Organisation: MRSL
Direct line: +(44) 1623/423 777
Direct fax: +(44) 1623/638 500
Mansfield Woodhouse
9AQ
12
(P)
RMT
Organisation: RMT
Direct line: +(44) 1283/522 201
Direct fax: +(44) 1283/522 279
Stanhope Bretby
Contract N°
RFCR-CT-2006-00001
Reference N°
TGC1.01/06
3.809.157 2.285.493
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: New mechanisation and automation of longwall and drivage equipment
Acronym NEMAEQ
:
Complete automation, together with the optimised mechanisation of longwall workings and roadway drivages, are key important factors for improving mine
productivity. Maximised coal production can be assured by minimising human machine attendance mistakes, reducing labour costs and increasing machine
running time and equipment reliability.
The strategic focus of the project is the development of full automatic shearer face equipment. This will take into account the development of software for
the design of cutting tools with a minimum of pick wear and machine down time. New designs of cutting drums will lead to improved tool cutting (pick)
loading efficiency with less fine coal and dust production. Innovative methods of maintenance and planned repair of the machines will maximise the running
time of longwall and drivage equipment.
The research will result in considerably improved productivity within European Coal mines.
State of progress:
Partners
(CO)
DSK
Responsible: Dipl. -Ing. Hans-Joachim KUBIK
Direct line: +(49) 2323/15 3446
Organisation: RAG
Fax: +(49)
e-mail: hans-joachim.kubik@rag.de
DE-44623 HERNE
(P)
RMT
Responsible: Dr. Lorraine KENT
Organisation: RMT
Direct line: +(44) 1283/52 22 01
Direct fax: +(44) 1283/52 22 79
ROCK MECHANICS TECHNOLOGY LTD
e-mail: lorraine.kent@rmtltd.com
Department: Research
Address: Bretby Business Park, Ashby Road
Stanhope Bretby
GB- BURTON-ON-TRENT DE15 0QD
(P)
MRSL
Responsible: Mr Colin TALBOT
Organisation: MRSL
Direct line: +(44) 1623/42 37 77
Direct fax: +(44) 1623/63 85 00
e-mail: colin@minesafety.fsnet.co.uk
Mansfield Woodhouse
9AQ
13
(P)
EMAG
Organisation: EMAG
Direct line: +(48) 32/200 78 35
Direct fax: +(48) 32/200 77 04
PL-40-189 KATOWICE
(P)
KOMAG
Responsible: M. Sc. Eng. Dariusz JASIULEK
Organisation: KOMAG
Direct line: +(48) 32/237 44 43
Direct fax: +(48) 32/231 08 43
CENTRUM MECHANIZACJI GORNICTWA
KOMAG
Address: ul. Pszczynska 37
e-mail: djasiulek@komag.gliwice.pl
PL-44101 GLIWICE
(P)
TU CLAUSTHAL
Responsible: Dipl.-Ing. Axel WEISSENBORN
Organisation: TU CLAUSTHAL
Direct line: +(49) 5323/72 2529
Direct fax: +(49) 5323/72 2377
TECHNISCHE UNIVERSITAET CLAUSTHAL
e-mail: axel.weissenborn@tu-clausthal.de
Address: Erzstrasse 20
DE-38678 CLAUSTHAL-ZELLERFELD
(P)
AITEMIN
Responsible: Mr Jorge DEL VALLE
Direct line: +(34) 91/442 59 55
Direct fax: +(34) 91/441 78 56
e-mail: j.delvalle@aitemin.es
(P)
EMBIGENCE
Responsible: Dipl. -Ing. Christoph MÜLLER
Organisation: BECKER MS
Direct line: +(49) 5485/830 145
Direct fax: +(49) 5485/830 158
BECKER MINING SYSTEMS AG
e-mail: chmueller@embigence.com
Address: St. Barbarastraße 3
DE-66299 FRIEDRICHSTHAL
Contract N°
RFCR-CT-2007-00001
Reference N°
TGC1.01/07
3.293.615 1.976.170
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Increased productivity and safety of European coalmines by advanced techniques and planning tools enabling an
improved strata control of the face-roadway junction
Acronym PROSAFECOAL
:
Longwall face ends are the most vulnerable areas of hard coal mines for injuries and production delays. They are also the most difficult to support.
Recently several major falls of ground and major face-end/roadway deformations have occurred in European mines showing that such incidents are often
caused by misjudgement of faulted zones, failing ribs and inappropriate support measure choices at the planning stage.
The project focuses on the development of reliable planning tools and advanced support techniques for faceroadway junctions to enable strata control of
this critical location.
This will have a considerable impact on the productivity and safety of European Coal mines.
State of progress:
Partners
14
(CO)
DSK
Responsible: Dr. -Ing. Holger WITTHAUS
Organisation: RAG
Direct line: +(49) 2323/15 22 50
Direct fax: +(49) 2323/15 33 95
e-mail: holger.witthaus@rag.de
Department: BTT-B
DE-44623 HERNE
(P)
RMT
Organisation: RMT
Direct line: +(44) 1283/52 22 01
Direct fax: +(44) 1283/52 22 79
Stanhope Bretby
(P)
UK COAL
Direct line: +(44) 1302/755 267
Direct fax: +(44) 1302/746 550
UK COAL MINING LTD
Harworth
(P)
ARMINES
Responsible: Dr. Faouzi HADJ HASSEN
Organisation: ARMINES
Direct line: +(33) 1/64 69 48 25
Direct fax: +(33) 1/64 69 47 11
ARMINES - ENSMP, CENTRE DE
GEOTECHNIQUE ET D'EXPLOITATION DU
SOUS-SOL
Address: 35 Saint-Honoré
e-mail: faouzi.hadj_hassen@ensmp.fr
FR-77305 FONTAINEBLEAU
(P)
GIG
Organisation: GIG
Direct line: +(48) 32/259 24 23
Direct fax: +(48) 32/258 44 25
PL-40166 KATOWICE
(P)
KW
Responsible: Mr Janusz IMIELA
Organisation: KW
Direct line: +(48) 32/757 22 21
Direct fax: +(48) 32/255 54 53
KOMPANIA WEGLOWA S.A.
e-mail: i.roj@kwsa.pl
Department: Production
Address: Powstancow 30
PL-40 039 KATOWICE
15
(P)
GEOCONTROL
Direct line: +(34) 91/553 17 63
Direct fax: +(34) 91/554 93 96
GEOCONTROL S.A.
ES-28003 MADRID
(P)
DMT
Responsible: Dr. Andreas K.M. HUCKE
Organisation: DMT
Direct line: +(49) 201/172 1562
Direct fax: +(49) 201/172 1012
DMT GmbH & Co KG
e-mail: andreas.hucke@dmt.de
Department: Strata Control and Support Technology
DE-45307 ESSEN
Contract N°
RFCR-CT-2007-00002
Reference N°
TGC1.02/07
3.612.890 2.167.734
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Advanced drivage and roadheading intelligent systems
Acronym ADRIS
:
The goal of this proposal is the development of novel, fully automated, self steering, more efficient systems for performing the preparatory works needed to
access coal seams, including drivage, roadheading, as well as mounting chambers for longwall face equipment. Activities will include the design,
modification and construction of several types of machines as well as their automatic steering and possibly self-steering systems, which will be performed
by a well balanced, interdisciplinary consortium of Research institutions, Machinery manufacturers and Mining Companies, thus guaranteeing the proper
balance between the theoretical and practical aspects of the work.
State of progress:
Partners
(CO)
AITEMIN
Responsible: Mr Angel RODRIGUEZ
Direct line: +(34) 91/442 59 55
Direct fax: +(34) 91/441 78 56
e-mail: angel.rodriguez@aitemin.es
(P)
DMT
Responsible: Dipl. -Ing. Dietmar PLUM
Organisation: DMT
Direct line: +(49) 201/172 1216
Direct fax: +(49) 201/172 1575
DMT GmbH & Co KG
e-mail: dietmar.plum@dmt.de
DE-45307 ESSEN
(P)
DSK
Responsible: Dipl. -Ing. Peter ACHILLES
Organisation: RAG
Direct line: +(49) 2323/15 39 44
Direct fax: +(49) 2323/15 33 95
e-mail: peter.achilles@rag.de
Department: BTT-BV
DE-44623 HERNE
16
(P)
HUNOSA
Responsible: Mr César CORDERO ESCOSURA
Organisation: HUNOSA
Direct line: +(34) 985/107 300
Direct fax: +(34) 985/107 320
HULLERAS DEL NORTE, S.A.
e-mail: ccordero@hunosa.es
Address: Avenida de Galicia 44
ES-33005 OVIEDO
(P)
KOMAG
Responsible: Dr. Dariusz PROSTANSKI
Organisation: KOMAG
Direct line: +(48) 32/237 46 62
Direct fax: +(48) 32/231 08 43
KOMAG
e-mail: dprostanski@komag.gliwice.pl
PL-44101 GLIWICE
(P)
MRSL
Responsible: Mr John FORD
Direct line: +(44) 1632/423 777
Organisation: MRSL
Direct fax: +(44) 1623/638 500
e-mail: j.ford@mrsl-research.com
Mansfield Woodhouse
9AQ
(P)
RMT
Direct line: +(44) 1283/52 22 01
Organisation: RMT
Direct fax: +(44) 1283/52 22 79
Stanhope Bretby
(P)
TALLERES ZITRON
Responsible: Mr Roberto ARIAS
Direct line: +(34) 985/168 132
Organisation: TALLERES ZITRON
Direct fax: +(34) 985/168 047
TALLERES ZITRÓN SA
e-mail: roberto@zitron.com
Address: Ctra. AS-18, N° 2386
ES-33392 PORCEYO - GIJÓN
Contract N°
RFCR-CT-2007-00003
Reference N°
TGC1.03/07
2.413.736 1.448.242
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Improving mining transport reliability
Acronym MINTOS
:
The proposal addresses a range of novel approaches to improving the performance, reliability and environmental aspects of operating transport systems
underground in deep, extensive coal mines with complex networks. The use of alternative motive power provisions for transport vehicles will be
investigated, by examining the potential for using alternative fuels, including fuel cells. The study also encompasses transport logistics and the potential
merits of using advanced management information and machine diagnostic systems. In addition, the safety and health aspects of machine fires, exhaust
emissions and whole body vibration are included.
State of progress:
Partners
17
(CO)
MRSL
Organisation: MRSL
Direct line: +(44) 1632/423 777
Direct fax: +(44) 1623/638 500
Mansfield Woodhouse
9AQ
(P)
RITTAL
Responsible: Dipl. -Ing. Martin ROSSMANN
Organisation: RITTAL
Direct line: +(49) 2772/505 1920
Direct fax: +(49) 2772/505 71907
RITTAL GMBH & CO KG
e-mail: rossmann.m@rittal.de
Department: R&D IT Solutions
Address: Auf dem Stuetzelberg
DE-35745 HERBORN
(P)
KOMAG
Responsible: Prof. Teodor WINKLER
Organisation: KOMAG
Direct line: +(48) 32/237 45 53
Direct fax: +(48) 32/231 08 43
KOMAG
e-mail: twinkler@komag.gliwice.pl
PL-44101 GLIWICE
(P)
EMAG
Organisation: EMAG
Direct line: +(48) 32/200 78 35
Direct fax: +(48) 32/200 77 04
PL-40-189 KATOWICE
(P)
AITEMIN
Responsible: Mr Pedro MORILLO
Direct line: +(34) 91/442 49 55
Direct fax: +(34) 91/441 78 56
Department: Risks Area
e-mail: pedro.morillo@aitemin.es
(P)
GIG
Organisation: GIG
Direct line: +(48) 32/259 24 23
Direct fax: +(48) 32/258 44 25
PL-40166 KATOWICE
18
(P)
KW
Responsible: Mr Andrzej PAKURA
Direct line: +(48) 32/757 20 38
Organisation: KW
Direct fax: +(48) 32/255 54 53
KOMPANIA WEGLOWA S.A.
e-mail: a.pakura@kwsa.pl
Department: Occupational Safety
PL-40 039 KATOWICE
Contract N°
RFCR-CT-2007-00004
Reference N°
TGC1.04/07
4.366.865 2.620.118
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Prediction and monitoring of subsidence hazards above coal mines
Acronym PRESIDENCE
:
Mining Subsidence Engineering is one of the most important topics in relation with coal mining. Although its occurrence, prediction and control are well
known, this project will apply various innovative techniques to an old problem.
These new techniques can been subdivided considering if they will be applied to the evaluation of long term stability of roadways, longwalls or shafts
(Laser Scanner survey and other geophysical non destructive techniques) for subsidence prediction; or if its application is to the subsidence control at
surface (digital photogrammetry, INSAR, seismicity). In this field all these monitoring techniques will be linked, by GPS, to a GIS so a good land
management, minimizing subsidence harzards, above existing coal mined areas will be achieved.
As a consequence of this project a better protection of the environment in coal areas and an improvement of the competitive position of European coal can
be assured.
State of progress:
Partners
(CO)
GEOCONTROL
Direct line: +(34) 91/553 17 63
Direct fax: +(34) 91/554 93 96
GEOCONTROL S.A.
ES-28003 MADRID
(P)
AITEMIN
Responsible: Mr Juan Carlos CATALINA
Direct line: +(34) 91/442 49 55
Direct fax: +(34) 91/441 78 56
e-mail: jc.catalina@aitemin.es
(P)
ARMINES
Responsible: Dr. Faouzi HADJ HASSEN
Organisation: ARMINES
Direct line: +(33) 1/64 69 48 25
Direct fax: +(33) 1/64 69 47 11
ARMINES - ENSMP, CENTRE DE
GEOTECHNIQUE ET D'EXPLOITATION DU
SOUS-SOL
Address: 35 Saint-Honoré
e-mail: faouzi.hadj_hassen@ensmp.fr
FR-77305 FONTAINEBLEAU
19
(P)
DMT
Responsible: Dipl. -Ing. Rainer KUCHENBECKER
Organisation: DMT
Direct line: +(49) 201/172 19 68
Direct fax: +(49) 201/172 19 71
DMT GmbH & Co KG
e-mail: rainer.kuchenbecker@dmt.de
Department: Geodataprocessing
DE-45307 ESSEN
(P)
DSK
Responsible: Dipl. -Ing. Volker SPRECKELS
Organisation: RAG
Direct line: +(49) 2323/15 46 40
Direct fax: +(49) 2323/15 46 11
e-mail: volker.spreckels@rag.de
Department: BG G1
DE-44623 HERNE
(P)
EMAG
Responsible: MSc. Eng. Jacek JUZWA
Organisation: EMAG
Direct line: +(48) 32/200 7874
Direct fax: +(48) 32/200 7702
e-mail: juzwa@emag.pl
PL-40-189 KATOWICE
(P)
MRSL
Responsible: Dr. Robert R. JOZEFOWICZ
Organisation: MRSL
Direct line: +(44) 1623/427 777
Direct fax: +(44) 1623/638 500
e-mail: bob.josef@btinternet.com
Mansfield Woodhouse
9AQ
(P)
RMT
Organisation: RMT
Direct line: +(44) 1283/52 22 01
Direct fax: +(44) 1283/52 22 79
Stanhope Bretby
(P)
UK COAL
Direct line: +(44) 1302/755 267
Direct fax: +(44) 1302/746 550
UK COAL MINING LTD
Harworth
20
Contract N°
RFCR-CT-2008-00001
Reference N°
TGC1.01/08
2.399.428 1.439.656
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Improved extraction ratios for deep coal mines
Acronym IMPREX
:
The objective of this Project is to research, identify and develop practical means by which coal recovery ratios in European deep mines can be improved
significantly in a safe and efficient manner.
To ensure more sustainable use of European coal reserves and reduce reliance upon imported energy, it is necessary to devise means of extracting
efficiently significant tonnages of the extensive areas of coal which are left around (and between) longwall panels and of improving the deep mined coal
industry’s ability to maximise its extraction of thick coal seams, large tonnages of which are currently abandoned in the goaf.
State of progress:
Contract in the process of signature
Partners
(CO)
RMT
Organisation: RMT
Direct line: +(44) 1283/522 201
Direct fax: +(44) 1283/522 279
Stanhope Bretby
(P)
UK COAL
Direct line: +(44) 1302/755 267
Direct fax: +(44) 1302/746 550
UK COAL MINING LTD
Harworth
(P)
UNIV NOTTINGHAM
Responsible: Dr. Rodney STACE
Organisation: UNIV NOTTINGHAM
Direct line: +(44) 115/951 40 82
Direct fax: +(44) 115/951 38 98
THE UNIVERSITY OF NOTTINGHAM
e-mail: rod.stace@nottingham.ac.uk
Address: University Park
GB- NOTTINGHAM NG7 2RD
(P)
DMT
Responsible: Dr. -Ing. Juergen te KOOK
Organisation: DMT
Direct line: +(49) 201/172 13 61
Direct fax: +(49) 201/172 10 12
DMT GmbH & Co KG
e-mail: juergen.tekook@dmt.de
Department: Strata control and support technology planning
DE-45307 ESSEN
(P)
TU CLAUSTHAL
Responsible: Dipl -Ing Elisabeth CLAUSEN
Direct line: +(49) 5323/72 22 84
Direct fax: +(49) 5323/72 23 77
TECHNISCHE UNIVERSITAET CLAUSTHAL
e-mail: elisabeth.clausen@tu-clausthal.de
Address: Adolf-Römerstraße 2A
21
(P)
GIG
Direct line: +(48) 32/259 24 23
Organisation: GIG
Direct fax: +(48) 32/258 44 25
PL-40166 KATOWICE
(P)
KHW
Responsible: Msc Eng Janusz CZARNECKI
Organisation: KHW
Direct line: +(48) 32/605 000
Direct fax: +(48) 32/605 5005
KATOWICKI HOLDING WEGLOWY S.A.
e-mail: j.czarnecki@khw.pl
Address: Damrota 18
PL-40-022 KATOWICE
Contract N°
RFCR-CT-2008-00002
Reference N°
TGC1.02/08
2.204.019 1.322.412
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Early detection and fighting of fires in belt conveyors
Acronym EDAFFIC
:
Incidents and accidents involving conveyor belt fires continue causing major infrastructure damage and production loses to mining companies, not only in
Europe, but all around the world. Research activities proposed within EDAFFIC will deal with the specific topics of fire in conveyor belts and related
ventilation issues. A multidisciplinary and comprehensive approach is proposed, in which all aspects related with conveyor belt fires will be adressed,
including, but not limited to, prevention, early detection, combustion process, new belt materials, firefighting, ventilation use in firefighting or managing
smoke, inertization, environmental hazards and occupational safety, etc.
State of progress:
Partners
(CO)
AITEMIN
Responsible: Mr Angel RODRIGUEZ
Direct line: +(34) 91/442 59 55
Direct fax: +(34) 91/441 78 56
e-mail: angel.rodriguez@aitemin.es
(P)
CBIDGP
Responsible: MSc Malgorzata RYSZKA
Organisation: CBIDGP
Direct line: +(48) 32/216 66 64
Direct fax: +(48) 32/216 66 66
CENTRUM BADAN I DOZORU GORNICTWA
PODZIEMNEGO SP Z.O.O.
Address: Ledzinska 8
e-mail: m.ryszka@cbidgp.pl
PL-43-143 LEDZINY
(P)
DMT
Responsible: Mr Heinrich PETERSMANN
Organisation: DMT
Direct line: +(49) 231/533 32 22
Direct fax: +(49) 201/533 32 97
DEUTSCHE MONTAN TECHNOLOGIE GmbH GAS & FIRE DIVISION
Address: Tremoniastraße 13
e-mail: heinrich.petersmann@dmt.de
DE-44137 DORTMUND
22
(P)
EMAG
Responsible: Dr. Wladyslaw MIRONOWICZ
Organisation: EMAG
Direct line: +(48) 32/200 7801
Direct fax: +(48) 32/200 7702
Department: Research & Development
e-mail: w.mironowicz@emag.pl
PL-40-189 KATOWICE
(P)
HUNOSA
Direct line: +(34) 985/107 300
Direct fax: +(34) 985/107 320
ES-33005 OVIEDO
(P)
MRSL
Direct line: +(44) 1632/423 777
Organisation: MRSL
Direct fax: +(44) 1623/638 500
Mansfield Woodhouse
9AQ
(P)
UK COAL
Responsible: Mr Stewart JOBLING
Direct line: +(44) 1302/75 52 71
Direct fax: +(44) 1302/74 65 50
UK COAL MINING LTD
e-mail: sjobling@ukcoal.com
Department: Headquarters Environment
Harworth
Contract N°
RFCR-CT-2008-00003
Reference N°
TGC1.03/08
3.676.251 2.205.751
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Mine emergency support technologies
Acronym EMTECH
:
Recent mine incidents, both within the EU and elsewhere, have highlighted the role that emergency support systems and technologies have in ensuring the
survival of the mine workforce. The large, deep complex mines of the European Union are presenting increasing challenges for the industry. There are
currently deficiencies in situational awareness and supporting communication and evacuation measures
available after a major accident. Crucially required technical progress in these fields will significantly enhance EU incident provision and emergency
preparedness. This will both help to ensure that the workforce is protected and secure the infrastructure of coal production.
State of progress:
Partners
23
(CO)
MRSL
Organisation: MRSL
Direct line: +(44) 1623/423 777
Direct fax: +(44) 1623/638 500
Mansfield Woodhouse
9AQ
(P)
AITEMIN
Responsible: Mr Pedro MORILLO
Direct line: +(34) 91/442 49 55
Direct fax: +(34) 91/441 78 56
Department: Risks Area
e-mail: pedro.morillo@aitemin.es
(P)
DMT
Responsible: Dipl.Ing. Rainer RELLECKE
Organisation: DMT
Direct line: +(49) 201/172 1744
Direct fax: +(49) 201/172 1942
DMT GmbH & Co KG
e-mail: rainer.rellecke@dmt.de
DE-45307 ESSEN
(P)
DSK
Responsible: Dipl -Ing Ulrich KIMMIT
Organisation: RAG
Direct line: +(49) 2323/15 2194
Direct fax: +(49) 2323/15 3993
e-mail: ulrich.kimmit@rag.de
DE-44623 HERNE
(P)
EMAG
Responsible: Dr. Wladyslaw MIRONOWICZ
Organisation: EMAG
Direct line: +(48) 32/200 7801
Direct fax: +(48) 32/200 7702
Department: Research & Development
e-mail: w.mironowicz@emag.pl
PL-40-189 KATOWICE
(P)
EMBIGENCE
Responsible: Dipl. -Ing. Christoph MÜLLER
Organisation: BECKER MS
Direct line: +(49) 5485/830 145
Direct fax: +(49) 5485/830 158
BECKER MINING SYSTEMS AG
e-mail: chmueller@embigence.com
Address: St. Barbarastraße 3
DE-66299 FRIEDRICHSTHAL
24
(P)
GEOCONTROL
Direct line: +(34) 91/553 17 63
Direct fax: +(34) 91/554 93 96
GEOCONTROL S.A.
ES-28003 MADRID
(P)
HUNOSA
Responsible: Mr Juan José FERNANDEZ DIAZ
Direct line: +(34) 985/10 73 69
Direct fax: +(34) 985/96 31 56
e-mail: juanjf@hunosa.es
Department: Safety
ES-33005 OVIEDO
(P)
UK COAL
Responsible: Mr Stewart JOBLING
Direct line: +(44) 1302/75 52 71
Direct fax: +(44) 1302/74 65 50
UK COAL MINING LTD
e-mail: sjobling@ukcoal.com
Department: Headquarters Environment
Harworth
(P)
CSRG
Responsible: MSc Eng Jan SYTY
Direct line: +(48) 32/3880 402
Organisation: CSRG
Direct fax: +(48) 32/282 26 81
CENTRALNA STACJA RATOWNICTWA
GORNICZEGO SA
Address: ul. Chorzowska 25
e-mail: j.syty@csrg.bytom.pl
PL-41-902 BYTOM
Contract N°
RFCR-CT-2008-00004
Reference N°
TGC1.04/08
1.764.112 1.058.467
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Investigation of adsorption and swelling behaviour of coal to determine the feasibility of CO2 sequestration and CH4
production enhancement
Acronym COALSWAD
:
The COALSWAD project is focused on a reliable estimation of CO2 sequestration capacity and CH4 production rate in coal.
Topics investigated :
• Adsorption behaviour of coal as function of rank;
• Competitive adsorption behaviour of CH4, CO2, N2 and O2 on moisture-equilibrated
coal;
• Swelling and shrinkage properties of coal and their influence on adsorption data;
• Calculation of absolute adsorption data.
The results of this project will help to decide if CO2 sequestration in coal effectively supports reaching the CO2 emission reduction target. Moreover they
are essential for environmental protection and should be transferable to other European regions.
State of progress:
Partners
25
(CO)
FHG
Responsible: Dr. Eva SCHIEFERSTEIN
Organisation: FHG
Direct line: +(49) 208/8598 1163
Direct fax: +(49) 208/8598 1290
FRAUNHOFER GESELLSCHAFT ZUR
FORDERUNG DER ANGEWANDTEN
FORSCHUNG
Address: Oseterfelderstraße 3
e-mail: eva.schieferstein@umsicht.fraunhofer.de
DE-46047 OBERHAUSEN
(P)
INC
Responsible: PD Dr. Habil. Reiner STAUDT
Organisation: INC
Direct line: +(49) 341/235 2671
Direct fax: +(49) 341/235 2701
INSTITUT FÜR NICHTKLASSISCHE CHEMIE e.V.
e-mail: staudt@inc.uni-leipzig.de
Address: Permoserstrasse 15
DE-04318 LEIPZIG
(P)
OEAW
Responsible: Prof. Dr. Peter LAGGNER
Organisation: OEAW
Direct line: +(43) 316/41 20 301
Direct fax: +(43) 316/41 20 390
ÖSTERREICHISCHE AKADEMIE DER
WISSENSCHAFTEN
Address: Dr. Ignaz-Seipel-Platz 2
e-mail: peter.laggner@oeaw.ac.at
AT-1010 VIENNA
(P)
UL
Responsible: Dr. Jörg MATYSIK
Organisation: UNIV LEIDEN
Direct line: +(31) 71/527 4198
Direct fax: +(31) 71/527 4603
LEIDEN UNIVERSITY (CENTRE OF
ENVIRONMENTAL SCIENCE)
Address: Einsteinweg 2
e-mail: j.matysik@chem.leidenuniv.nl
NL-2300 RA LEIDEN
(P)
DMT
Responsible: Dipl.-Geol. Ralph SCHLUETER
Organisation: DMT
Direct line: +(49) 201/172 1952
Direct fax: +(49) 201/172 1971
DMT GmbH & Co KG
e-mail: ralph.schlueter@dmt.de
Department: Exploration & Geosurvey Division, Geology &
Borehol
DE-45307 ESSEN
(P)
DPB
Responsible: Dr.- Ing. Petr HEMZA
Organisation: DPB
Direct line: +(420) 558/61 23 30
Direct fax: +(420) 558/67 15 88
GREEN GAS DPB a.s.
e-mail: petr.hemza@dpb.cz
Address: Rudé armády 637
CZ-73921 PASKOV
26
Contract N°
RFCR-CT-2008-00005
Reference N°
TGC1.05/08
1.925.484 1.155.291
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Flooding management for underground coal mines considering regional mining networks
Acronym FLOMINET
:
The proposal wants to develop numerical models to forecast impacts of regional mine water rebound on mine water, groundwater and surface waters.
Optimisation of the mine water management will allow to better protect the environment. The research is also dedicated to industrial interest using the
mine water rise for opportunities to recover renewable energy in form of electricity and geothermal heat. The numerical models will be extended to include
density and temperature terms to become a practical planning tools for these activities. One additional application is the forecast on risks originating from
mine gases pressuried by the rising mine water. The variety of model applications will demonstrate the capability of the proposed methodology for regional
mine water rebound in interconnected underground hard coal mines.
State of progress:
Partners
(CO)
DMT
Responsible: Dr. Christoph KLINGER
Organisation: DMT
Direct line: +(49) 201/172 1812
Direct fax: +(49) 201/172 1891
DMT GmbH & Co KG
e-mail: christoph.klinger@dmt.de
DE-45307 ESSEN
(P)
INERIS
Responsible: Mr Arnaud CHARMOILLE
Organisation: INERIS
Direct line: +(33) 3/44 55 62 94
Direct fax: +(33) 3/44 55 67 00
INSTITUT NATIONAL DE L'ENVIRONNEMENT
INDUSTRIEL ET DES RISQUES
Address: Parc Technologique ALATA
e-mail: arnaud.charmoille@ineris.fr
FR-60550 VERNEUIL-EN-HALATTE
(P)
AITEMIN
Responsible: Mr Jesus Maria SUSO LLAMAS
Direct line: +(34) 925/24 11 62
Direct fax: +(34) 925/23 04 03
ASOCIACION INVESTIGACION Y
DESARROLLO IND. RECURSOS NATURALES
Department: Departamento de Medio Ambiente
Address: Rio Cabriel s/n
e-mail: jesus.suso@aitemin.es
ES-45007 TOLEDO
(P)
GIG
Responsible: Dipl. -Ing Grzegorz GZYL
Organisation: GIG
Direct line: +(48) 32/259 23 17
Direct fax: +(48) 32/259 65 33
e-mail: gzyl@gig.katowice.pl
PL-40166 KATOWICE
(P)
HUNOSA
Direct line: +(34) 985/107 300
Direct fax: +(34) 985/107 320
ES-33005 OVIEDO
Technical Group TGC1 has 13 Projects and 94 Partners
Total Projects: 13 - Total Partners: 94
27
Technical Group TGC2 :"Coal preparation, conversion and upgrading"
Contract N°
RFCR-CT-2005-00004
Reference N°
TGC2.2/05
2.015.084 1.209.050
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Development of a new generation of coal-derived environmentally-friendly pitches
Acronym ECOPITCH
:
This proposal deals with the development of coal-tar based pitches of low toxicity. It is aimed to both, to guarantee the pitch supply for the steel industry
and to reduce the environmental impact derived from the use of coal-tar pitches. Economical aspects in relation with the implementation of the new
technology and the potential impact of the results are taken into account. Apart from the coverage of the needs of traditional pitch user industries, it is also
intended to develop pitches with potential applications in new carbon materials for energy and high technology applications, such as supercapacitors
associated to fuel cells.
The project has been built on the basis of a multidisciplinar consortium, which includes expertise from different research organizations and universities,
under the umbrella of three industries which cover the range from pitch makers to end pitch users. This will guarantee the full exploitation of the results.
The contribution of five countries, geographically well distributed, will ensure a good dissemination of results.
Furthermore, the development of these new pitches will offer the opportunity to upgrade a low value product of the coal conversion process and hopefully,
the opportunity to develop a new pitch which may compete with the well established Japanese AR-24, produced by Mitsubishi.
State of progress:
Partners
(CO)
CSIC
Responsible: Prof. Rosa MENENDEZ LOPEZ
Organisation: CSIC-INCAR
Direct line: +(34) 985/11 89 98
Direct fax: +(34) 985/29 76 62
INSTITUTO NACIONAL DEL CARBON
e-mail: rosmenen@incar.csic.es
Address: C/ Francisco Pintado, 26
Apdo. Correos 73
ES-33080 OVIEDO
(P)
IMPERIAL COLLEGE
Responsible: Prof. Rafael KANDIYOTI
Organisation: IMPERIAL COL.
Direct line: +(44) 207/594 55 81
Direct fax: +(44) 207/594 56 04
IMPERIAL COLLEGE OF SCIENCE,
TECHNOLOGY AND MEDECINE
Department: Energy Conversion Research Group
Address: Prince Consort Road
e-mail: r.kandiyoti@imperial.ac.uk
GB- LONDON SW7 2BP
(P)
INETI
Responsible: Dr. Ibrahim GULYURTLU
Organisation: INETI
Direct line: +(351) 21/092 47 89
Direct fax: +(351) 21/716 65 69
INSTITUTO NACIONAL DE ENGENHARIA,
TECNOLOGIA E INOVACAO
Address: Estrada do Paço do Lumiar, 22
e-mail: ibrahim.gulyurtlu@ineti.pt
PT-1649 038 LISBOA
(P)
IQNSA
Responsible: Dr. Juan José FERNANDEZ-RODRIGUEZ
Organisation: IQNSA
Direct line: +(34) 985/982 600
Direct fax: +(34) 985/982 666
INDUSTRIAL QUIMICA DEL NALON S.A.
e-mail: juanjo@nalonchem.com
ES-33005 OVIEDO
(P)
CARBONE SAVOIE
Responsible: Dr. Serge LACROIX
Direct line: +(33) 4/78 77 08 04
Organisation: CARBONE SAVOIE
Direct fax: +(33) 4/78 77 08 20
CARBONE SAVOIE
e-mail: serge.lacroix@graftech.com
Department: Research and Development
Address: 30 rue Louis Jouvet
FR-69631 VENISSIEUX
28
Ext.: 4789
(P)
WROCLAW UT
Responsible: Prof. Jacek MACHNIKOWSKI
Organisation: UNIV WROCLAW
Direct line: +(48) 71/320 63 50
Direct fax: +(48) 71/322 15 80
WROCLAW UNIVERSITY OF TECHNOLOGY
e-mail: jacek.machnikowski@pwr.wroc.pl
Department: Coal and Carbon Materials Group
Address: Gdanska 7/9
PL-50344 WROCLAW
Contract N°
RFCR-CT-2005-00005
Reference N°
TGC2.3/05
1.930.920 1.158.552
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/09/2005 31/08/2008 28/02/2009
Title: Reduction of polycyclic aromatic hydrocarbon (PAH) emissions from coking plants
Acronym REDPAH
:
European steel production relies on reliable coke supply, which can be achieved only if European coke is produced in environmental friendly conditions.
However, using existing coking techniques, the European proposal for new PAH emission standards (benz(a)pyrene at 1 ng/m3) cannot be achieved.
Since more than half of PAH emissions from modern coking comes from door leakages the most effective strategies for reducing PAH emissions with
existing coke ovens are:
- to reduce the original rate of PAH formation in the oven (dependent on the initial coking blend),
- to implement a better control of gas pressure inside the oven.
Further, PAH emissions can be used to help monitor the condition of door seals. Regarding future regulation, it is also important to identify in the
surrounding areas of coking plants the sources of emissions in order to quantify the
contributions from coking to the total PAH concentration in ambient air.
This integrated project includes laboratory and pilot scale investigations as well as tests at industrial scale for validation.
State of progress:
Partners
(CO)
UNIV NOTTINGHAM
Responsible: Prof. Colin E. SNAPE
Direct line: +(44) 115/951 4166
Direct fax: +(44) 115/951 4115
e-mail: colin.snape@nottingham.ac.uk
(P)
ARCELOR RESEARCH
Responsible: Mr Etienne PETIT
Organisation: CPM
Direct line: +(33) 3/87 84 90 15
Direct fax: +(33) 3/87 84 90 00
CENTRE DE PYROLYSE DU CHARBON DE
MARIENAU
Address: Parc d'activités Forbach Ouest
e-mail: etienne.petit@cpmarienau.com
FR-57612 FORBACH CEDEX
(P)
CSIC
Responsible: Dr. Ramon ALVAREZ
Direct line: +(34) 985/11 89 60
Direct fax: +(34) 985/29 76 62
e-mail: ralvarez@incar.csic.es
Apdo. Correos 73
ES-33080 OVIEDO
29
(P)
ICHPW
Responsible: Dr. Aleksander SOBOLEWSKI
Organisation: ICHPW
Direct line: +(48) 32/271 51 52
Direct fax: +(48) 32/271 08 09
INSTYTUT CHEMICZNEJ PRZEROBKI WEGLA INST. FOR CHEMICAL PROC. OF COAL
Department: R&D
Address: ul. Zamkowa 1
e-mail: asob@ichpw.zabrze.pl
PL-41 803 ZABRZE
(P)
MONCKTON
Responsible: Mr Iain ARCHIBALD
Direct line: +(44) 1226/722601
Organisation: MONCKTON
Direct fax: +(44) 1226/700307
THE MONCKTON COKE & CHEMICAL
COMPANY LTD
Department: Monckton Works
Address: Royston, Lundhill Lane
e-mail: iain.archibald@moncktoncoke.co.uk
GB- BARNSLEY S71 4BE
Contract N°
RFCR-CT-2006-00002
Reference N°
TGC2.01/06
3.071.461 1.842.876
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Maximising carbon utilisation through improved raw material selection and process control
Acronym MAXICARB
:
The principal aims of the project are to deliver a critical requirement for improved flexibility of carbon sources available to EU cokemakers and to optimise
process operations for maximised coke productivity and reduced environmental emissions.
The work is essential to address rapidly rising coal/coke costs and increasingly restricted availability of traditionally used supplies. The aims will be
achieved through an integrated series of laboratory, pilot scale and plant trials designed to:
• Develop novel coal characterisation techniques for initial selection of suitable blend components.
• Evaluate alternative carbon additives, including biomass and recycled products.
• Optimise blend preparation and process operations for maximised coke productivity and yield.
• Generate mathematical modelling methods for improved blend formulation and coke quality prediction.
• Assess the environmental and economic impact of proposed changes in blend types and process operations.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Ruth POULTNEY
Organisation: CORUS UK
Direct line: +(44) 1642/382 107
Direct fax: +(44) 1642/460 321
CORUS UK LIMITED - TEESSIDE
TECHNOLOGY CENTRE
Address: Eston Road, Grangetown
e-mail: ruth.poultney@corusgroup.com
GB- MIDDLESBROUGH TS6 6US
(P)
DMT
Responsible: Dipl. -Ing. Friedhelm STRELOW
Organisation: DMT
Direct line: +(49) 201/172 17 87
Direct fax: +(49) 201/172 13 28
DMT GmbH & Co KG
e-mail: friedhelm.strelow@dmt.de
Department: Pilot Scale Carbonisation Plant
DE-45307 ESSEN
30
(P)
CSIC
Responsible: Dr. Ramon ALVAREZ
Direct line: +(34) 985/11 89 60
Direct fax: +(34) 985/29 76 62
e-mail: ralvarez@incar.csic.es
Apdo. Correos 73
ES-33080 OVIEDO
(P)
VOEST-ALPINE
Responsible: Dipl. -Ing. Karl PILZ
Direct line: +(43) 732/6585 4534
Organisation: VOEST-ALPINE
Direct fax: +(43) 732/6980 4534
VOEST-ALPINE STAHL GmbH
e-mail: karl.pilz@voestalpine.com
Department: R&D
Address: VOEST-ALPINE Strasse 3
AT-4031 LINZ
(P)
UNIV NOTTINGHAM
Direct line: +(44) 115/951 4166
Direct fax: +(44) 115/951 4115
(P)
TU BERLIN
Responsible: Prof. Halit Z. KUYUMCU
Direct line: +(49) 30/314-22724
Organisation: TU BERLIN
Direct fax: +(49) 30/314-26432
TECHNISCHE UNIVERSITÄT BERLIN
e-mail: kuyumcu@aufbereitung.tu-berlin.de
Address: Strasse des 17. Juni 135
DE-10623 BERLIN
(P)
ARCELOR RESEARCH
Responsible: Dr. Paul PERNOT
Direct line: +(33) 3/87 84 90 16
Organisation: CPM
Direct fax: +(33) 3/87 84 90 00
MARIENAU
e-mail: paul.pernot@cpmarienau.com
Contract N°
RFCR-CT-2006-00003
Reference N°
TGC2.02/06
2.532.282 1.519.369
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Hydrogen separation in advanced gasification processes
Acronym HYDROSEP
:
This proposal addresses the development of new membranes and adsorbents to reduce the costs of adapting integrated gasification combined cycle (IGCC)
processes for hydrogen separation with CO2 capture. The current available technology, physical solvent processes such as Rectisol and Selexol, can only
operate close to ambient temperatures and are best at high partial pressures. A range of high capacity carbon-based adsorbents based on activated phenolic
resins and nitrogen-containing precursors, such as polyacrylonitrile (PAN), will be developed and tested for CO2 capture. Promising membrane
configurations, encompassing metal, ceramics and polymers will be developed and tested to determine the effectiveness of the hydrogen separation
processes at realistic operating conditions. Process designs and modelling will be conducted incorporating the new membranes materials and CO2
adsorbents.
State of progress:
Partners
31
(CO)
UNIV NOTTINGHAM
Direct line: +(44) 115/951 4166
Direct fax: +(44) 115/951 4115
(P)
ELCOGAS
Responsible: M.Sc. Pedro CASERO CABEZON
Organisation: ELCOGAS
Direct line: +(34) 926/449 763
Direct fax: +(34) 926/410 037
ELCOGAS SA
e-mail: pcasero@elcogas.es
Address: 200 crtra Calzada a Puertollano km 27
ES-13500 PUERTOLLANO
(P)
CSIC
Responsible: Dr. Fernando RUBIERA
Direct line: +(34) 985/11 89 75
Direct fax: +(34) 985/29 76 62
e-mail: frubiera@incar.csic.es
Apdo. Correos 73
ES-33080 OVIEDO
(P)
AUTH
Responsible: Prof. George SAKELLAROPOULOS
Organisation: AUTH
Direct line: +(30) 23/10996 271
Direct fax: +(30) 23/10996 168
ARTISTOTLE UNIVERSITY OF THESSALONIKI
e-mail: sakel@vergina.eng.auth.gr
Address: University Campus
GR-54124 THESSALONIKI
(P)
CERTH
Responsible: Dr. -Ing. George SKODRAS
Organisation: CERTH/ISFTA
Direct line: +(30) 2310/996 225
Direct fax: +(30) 2310/996 168
CENTRE FOR RESEARCH AND TECHNOLOGY
HELLAS (CERTH) /ISFTA
Department: CERTH
Address: 4th km National Road Ptolemais - Kozani
e-mail: skodras@vergina.eng.auth.gr
Kozani
GR-50200 PTOLEMAIS
(P)
INETI
Organisation: INETI
Direct line: +(351) 21/092 47 89
Direct fax: +(351) 21/716 65 69
PT-1649 038 LISBOA
(P)
MCAT
Responsible: Dr. Oleksandr KOZYNCHENKO
Organisation: MCAT
Direct line: +(44) 1483/236 371
Direct fax: +(44) 1483/136 405
MAST CARBON TECHNOLOGY Ltd
e-mail: kozynch@mastcarbon.co.uk
Address: Henley Park
UK- GUILDFORD GU3 2AF
32
Ext.: 4789
(P)
CSM
Responsible: Dr Eros Luciano FARACI
Direct line: +(39) 06/505 53 36
Organisation: CSM
Direct fax: +(39) 06/505 54 61
CENTRO SVILUPPO MATERIALI
e-mail: e.faraci@c-s-m.it
Address: Via di Castel Romano 100
IT-00128 ROMA EUR
(P)
KTI
Responsible: Dr. Gaetano IAQUANIELLO
Organisation: KTI
Direct line: +(39) 06/60216 231
Direct fax: +(39) 06/65793 002
TECHNIP K.T.I. SPA
e-mail: iaquaniello.a@ktispa.it
Department: Technology & Business Development
Address: Viale Castello della Magliana 75
IT-00148 ROME
Contract N°
RFCR-CT-2006-00004
Reference N°
TGC2.03/06
1.595.507
957.304
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Coke oven operating limits
Acronym COOL
:
The objective of this research project is to define the safe limits of coke oven battery operating conditions compatible with a long service life in terms of
thermal and mechanical stresses.
For this purpose a 3D thermo-mechanical model of the heating walls taking into account the assembly of bricks and joints will be developed. Different
sources of stresses on the oven walls will be investigated : thermal load, coking pressure, pushing force.
Theoretical (model) and experimental investigations will be carried out at laboratory scale, in pilot oven and in coke plants to evaluate swelling pressure
and pushing force for different carbonisation parameters.
As a result, the maximum acceptable production rate in safe conditions for the battery service life will be defined.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mr Daniel ISLER
Organisation: CPM
Direct line: +(33) 3/87 84 90 02
Direct fax: +(33) 3/87 84 90 00
MARIENAU
e-mail: daniel.isler@cpmarienau.com
(P)
UNIV ORLEANS
Responsible: Prof. Alain GASSER
Organisation: LSMP
Direct line: +(33) 2/38 49 49 36
Direct fax: +(33) 2/38 41 73 29
LABORATOIRE DE MECANIQUES DES
SYTEMES ET DES PROCEDES
e-mail: alain.gasser@univ-orleans.fr
Address:
FR-45072 ORLEANS CEDEX 2
(P)
ICHPW
Responsible: Dr. Aleksander SOBOLEWSKI
Organisation: ICHPW
Direct line: +(48) 32/271 51 52
Direct fax: +(48) 32/271 08 09
INSTYTUT CHEMICZNEJ PRZEROBKI WEGLA INST. FOR CHEMICAL PROC. OF COAL
Department: R&D
Address: ul. Zamkowa 1
e-mail: asob@ichpw.zabrze.pl
PL-41 803 ZABRZE
33
(P)
RUUKKI
Responsible: Mr Olavi KERKKONEN
Direct line: +(358) 20/59 22514
Organisation: RAUTARUUKKI
Direct fax: +(358) 20/59 23105
RAUTARUUKKI OYJ
e-mail: olavi.kerkkonen@ruukki.com
Address: Rautaruukintie 155
FI-92101 RAAHE
(P)
ILVA
Responsible: Dr Aldo BOVE
Direct line: +(39) 010/607 67 04
Organisation: ILVA
Direct fax: +(39) 010/607 67 66
ILVA
e-mail: aldo.bove@rivagroup.com
Department: Ironmaking - Raw Material Lab Responsible
Address: Via Corsica 4
IT-16128 GENOVA
Contract N°
RFCR-CT-2007-00005
Reference N°
TGC2.01/07
2.536.420 1.521.852
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Near zero emission advanced fluidised bed gasification
Acronym FLEXGAS
:
In the 1970’s and 1980’s the developments of fluidised bed gasification technologies stopped at pilot/demonstration scale for economic reasons but it grew
the interest in its use with biomass for many reasons (fuel flexibility, wide range operation scales suitability, do not require fine grinding difficult with
biomass).
In this project the way to overcoming the potential disadvantages of fluidised bed gasification and its use to process biomass/waste together with coal (at
different operation scales and applications) and the technology for CO2 capture/reduction will be investigated. The effects of different fuels, composition
and gasification medium on the quality of the producer gas will be also evaluated.
Particular focus is on novel technologies for gasification coupled with CO2 sequestration and for producing hydrogen rich syngas from coal and
biomass/waste.
State of progress:
Partners
(CO)
CNR
Responsible: Mr Francesco MICCIO
Organisation: IRC-CNR
Direct line: +(39) 08/159 31 567
Direct fax: +(39) 08/159 36 936
ISTITUTO DI RICERCHE SULLA
COMBUSTIONE - CONSIGLIO NAZIONALE
DELLE RIC
Address: Piazzale Tecchio 80
e-mail: miccio@irc.cnr.it
IT-80125 NAPOLI
(P)
INETI
Organisation: INETI
Direct line: +(351) 21/092 47 89
Ext.: 4789
Direct fax: +(351) 21/716 65 69
PT-1649 038 LISBOA
(P)
UNIV VIENNA
Responsible: Prof. Dr. Hermann HOFBAUER
Organisation: UNIV VIENNA
Direct line: +(43) 1/58801-15970
Direct fax: +(43) 1/58801-15999
TECHNISCHE UNIVERSITAET WIEN
e-mail: hhofba@mail.zserv.tuwien.ac.at
Department: Head of Institute
Address: Institute of Chemical Technology & Analysis
Getreidemarkt 9/164 EC
AT-1060 VIENNA
34
(P)
ICPF
Responsible: Dr. Miroslav PUNCOCHAR
Organisation: ICPF
Direct line: +(420) 220/390 298
Direct fax: +(420) 220/920 661
INSTITUTE OF CHEMICAL PROCESS
FUNDAMENTALS ACAD. OF SCIENCES OF CZ
Address: Rozvojova 135
e-mail: punc@icpf.cas.cz
CZ-165 02 PRAHA 6
(P)
IMPERIAL COLLEGE
Responsible: Dr. Marcos MILLAN
Direct line: +(44) 20/7594 16 33
Organisation: IMPERIAL COLLEGE
Direct fax: +(44) 20/7594 56 38
TECHNOLOGY AND MEDICINE
Address: South Kensington Campus
e-mail: marcos.millan@imperial.ac.uk
GB- LONDON SW7 2AZ
(P)
CIEMAT
Responsible: Dr. José Maria SANCHEZ HERVAS
Organisation: CIEMAT
Direct line: +(34) 913 466 145
Direct fax: +(34) 913 466 269
CENTRO DE INVESTIGACIONES ENERGÉTICAS
MEDIOAMBIENTALES Y TECNOLÓGICAS
Address: Avda Complutense 22
e-mail: josemaria.sanchez@ciemat.es
ES-28040 MADRID
(P)
ARI
Responsible: Dr. Maria Luisa PELIZZA
Organisation: ARI
Direct line: +(39) 010/655 8397
Direct fax: +(39) 010/749 0875
ANSALDO RICERCHE SpA
e-mail: marisa.pelizza@ari.ansaldo.it
Address: corso Perrone 25
IT-16152 GENOVA
(P)
BKG
Responsible: Mr. Markus KOCH
Organisation: BKG
Direct line: +(43) 3322/428 5012
Direct fax: +(43) 3322/428 5015
BIOMASSE KRAFTWERK GÜSSING GMBH &
CO KG
Address: Europastrasse 1
e-mail: m.koch@eee-info.net
AT-7540 GÜSSING
(P)
REPOTEC
Responsible: Mr Harald TREMMEL
Organisation: REPOTEC
Direct line: +(43) 1/216 1895 506
Direct fax: +(43) 1/216 1895 15
REPOTEC - RENEWABLE POWER
TECHNOLOGIES UMWELTTECHNIK GMBH
Address: Europastrasse 1
e-mail: h.tremmel@repotec.at
AT-7540 GÜSSING
35
Contract N°
RFCR-CT-2007-00006
Reference N°
TGC2.02/07
3.139.846 1.853.308
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Hydrogen oriented underground coal gasification for Europe
Acronym HUGE
:
The project explores the technology for hydrogen production through underground gasification of coal in a dynamic geo-reactor. The process will be
controlled through purposed dynamic changes in temperature and pressure of the reactants and products. The project addresses CBM usage and CO2
sequestration in coal deposits. The environmental fingerprint of the technology on air, water and strata stability will be evaluated. The locations of
demonstration plants will be chosen through computer modelling and simulation. Large scale production of hydrogen from coal is crucial for coal mining
industries and will serve the needs of energy, chemistry and transportation sectors of Europe.
State of progress:
Partners
(CO)
GIG
Responsible: Dr. Krzysztof STANCZYK
Organisation: GIG
Direct line: +(48) 32/259 2267
Direct fax: +(48) 32/259 6533
e-mail: k.stanczyk@gig.katowice.pl
Department: Energy Saving and Air Protection
PL-40166 KATOWICE
(P)
TU DELFT
Responsible: Dr. Hans BRUINING
Organisation: TU DELFT
Direct line: +(31) 15/278 60 32
Direct fax: +(31) 15/278 79 66
DELFT UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING
Address: Stevin Laboratory
e-mail: j.bruining@tudelft.nl
Stevinweg 1
NL-2628 CN DELFT
(P)
USTUTT
Responsible: Ms. Anja SCHUSTER
Organisation: UNIV STUTTGART
Direct line: +(49) 711/685 68935
Direct fax: +(49) 711/685 63491
UNIVERSITAET STUTTGART
e-mail: anja.schuster@ivd.uni-stuttgart.de
Address: Pfaffenwaldring 23
DE-70569 STUTTGART
(P)
ICPF
Responsible: Dr. Olga SOLCOVA
Organisation: ICPF
Direct line: +(420) 220/390 279
Direct fax: +(420) 220/390 286
INSTITUTE OF CHEMICAL PROCESS
FUNDAMENTALS ACAD. OF SCIENCES OF CZ
Address: Rozvojova 135
e-mail: solcova@icpf.cas.cz
CZ-165 02 PRAHA 6
(P)
ISSeP
Responsible: Ir. Hoang Luong TRAN
Organisation: ISSeP
Direct line: +(32) 4/229 82 08
Direct fax: +(32) 4/253 54 16
INSTITUT SCIENTIFIQUE DE SERVICE PUBLIC
e-mail: hl.tran@issep.be
Address: Rue du Chéra 200
BE-4000 LIEGE
36
(P)
KW
Responsible: Dr. Eng. Marek SZARAFINSKI
Organisation: KW
Direct line: +(48) 32/757 26 09
Direct fax: +(48) 32/255 54 53
KOMPANIA WEGLOWA SA
e-mail: mszarafinski@kwsa.pl
Department: Mines Ventilation
PO-40 039 KATOWICE
(P)
BOT GIE
Responsible: Mr Jacek GADOWSKI
Organisation: BOT GIE
Direct line: +(48) 42/66 32 218
Direct fax: +(48) 42/63 53 605
BOT GORNICTWO I ENERGETYKA SA
e-mail: jacek.gadowski@bot.pl
Address: Aleja Pilsudskiego 12
PL-90051 LODZ
(P)
POLTEGOR INST
Responsible: Prof. Jerzy BEDNARCZYK
Organisation: POLTEGOR INST
Direct line: +(48) 71/348 82 15
Direct fax: +(48) 71/348 43 20
POLTEGOR INSTYTUT - INSTYTUT
GORNICTWA ODKRYWKOWEGO
Address: Parkowa 25
e-mail: poltegor@igo.wroc.pl
PL-51 616 WROCLAW
(P)
UCG PARTNER
Responsible: Dr. Michael GREEN
Organisation: UCG PARTNER
Direct line: +(44) 2083/905 132
Direct fax: +(44) 2083/905 132
UCG PARTNERSHIP LTD
e-mail: michael.green@ucgp.com
Address: Coronation House
Guildford Road
GB- WOKING GU22 7QD
(P)
SUT
Responsible: Prof. Jan PALARSKI
Organisation: SUT
Direct line: +(48) 32/2371 191
Direct fax: +(48) 32/2371 819
THE SILESIAN UNIVERSITY OF TECHNOLOGY
e-mail: jan.palarski@polsl.pl
Department: Clean Mining Technologies
Address: ul.. Akademicka 2
PL-44 100 GLIWICE
(P)
NMA
Responsible: Prof. Volodymyr BONDARENKO
Organisation: NMA
Direct line: +(380) 562/471 472
Direct fax: +(380) 567/446 197
NATIONAL MINING UNIVERSITY
e-mail: v_domna@yahoo.com
Department: The Underground Mining Faculty
Address: K. Marx Av. 19
49027 DNIPROPETROVSK
37
Contract N°
RFC2-CT-2008-00006
Reference N°
TGC2.01/08
326.927
196.156
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2009 31/12/2009
Title: Promotion of European coal to liquids R&D activities
Acronym CTLEUROPE
:
This Type 2 accompanying measure will promote and disseminate the scope and achievements of the ECSC and RFCS projects on coal-to-liquids (CTL) R,
D&D to those major coal- and oil shale-using new member states of the EU, Poland, Czech Republic and Estonia, in which there is significant potential for
an uptake of CTL technology and where industry is now starting to reconsider the development of CTL processes. It will provide a to technical and
economic state of the art review of CTL activities, past and present, based on ECSC and RFCS projects, together with comment on environmental issues
plus an impact assessment of current CTL R&D capabilities within EU industry, institutes and academia.
State of progress:
Partners
(CO)
IEA
Responsible: Dr. Andrew MINCHENER
Organisation: IEA
Direct line: +(44) 1452/857 559
Direct fax: +(44) 1452/857 559
IEA COAL RESEARCH LIMITED
e-mail: andrew@minchener.fsnet.co.uk
Address: Gemini House, 10/18
Putney Hill
GB- LONDON SW15 6AA
(P)
FUELCONSULT
Responsible: Dr. Bernhard BONN
Organisation: FUELCONSULT
Direct line: +(49) 201/430 90 37
Direct fax: +(49) 201/430 84 28
FUELCONSULT GMBH
e-mail: b.bonn@fuelconsult.de
Address: Habichtstrasse 63
DE-45134 ESSEN
(P)
GIG
Responsible: Dr. Krzysztof STANCZYK
Organisation: GIG
Direct line: +(48) 32/259 2267
Direct fax: +(48) 32/259 6533
e-mail: k.stanczyk@gig.katowice.pl
Department: Energy Saving and Air Protection
PL-40166 KATOWICE
(P)
TALLINN UT
Responsible: Prof.Dr. Andres SIIRDE
Organisation: UNIV TALLINN
Direct line: +(372) 620/39 07
Direct fax: +(372) 620/20 20
TALLINN UNIVERSITY OF TECHNOLOGY
e-mail: asiirde@staff.ttu.ee
Address: Kopli, 116
EE-11712 TALLINN
(P)
SEVEn
Responsible: Dipl. Eng. Bohuslav MALEK
Organisation: SEVEn
Direct line: +(420) 224/252 115
Direct fax: +(420) 224/247 597
SEVEN - STREDISKO PRO EFEKTIVNI
VYUZIVANI ENERGIE o.p.s.
Address: Americka 17
e-mail: bohuslav.malek@svn.cz
CZ-12000 PRAGUE 2
38
Contract N°
RFCR-CT-2008-00007
Reference N°
TGC2.02/08
2.490.112 1.494.068
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Reduction of emissions and energy utilisation of coke oven underfiring heating systems through advanced diagnostics and
control
Acronym ECOCARB
:
The project aims are to reduce emissions and maximise energy efficiency of coke oven underfiring heating using intelligent diagnostics and individual wall
heating control.
These will be achieved by developing data-driven diagnostics techniques to detect faults, such as blocked nozzles and through-wall leakage, in the heating
flues and integrated with an innovative automatic individual wall heating control system, and hence reduce NOx, SO2, CO, CO2, particulates emissions
and increase energy efficiency.
The project addresses the competitive and environmentally friendly conversion of coal. The technology implementation will be easily transferable to any
European cokemaking plant.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Mansour SAIEPOUR
Direct line: +(44) 1709/825 262
Direct fax: +(44) 1709/825 400
CORUS UK LTD - SWINDEN TECHNOLOGY
CENTRE
Address: Moorgate Road
e-mail: mansour.saiepour@corusgroup.com
Rotherham
GB- SOUTH YORKSHIRE S60 3AR
(P)
ARCELOR RESEARCH
Responsible: Mr Daniel ISLER
Organisation: CPM
Direct line: +(33) 3/87 84 90 02
Direct fax: +(33) 3/87 84 90 00
MARIENAU
e-mail: daniel.isler@cpmarienau.com
(P)
VDEH-BFI
Responsible: Dr.-Ing. Frank MINTUS
Organisation: VDEH-BFI
Direct line: +(49) 211/6707 355
Direct fax: +(49) 211/6707 205
VDEh-BETRIEBSFORSCHUNGSINSTITUT GmbH
e-mail: frank.mintus@bfi.de
Department: R&D
Address: Sohnstrasse 65
DE-40237 DÜSSELDORF
(P)
UHDE
Responsible: Mr Ulrich KOCHANSKI
Organisation: UHDE
Direct line: +(49) 231/547 33 70
Direct fax: +(49) 231/547 20 70
UHDE GmbH
e-mail: ulrich.kochanski@thyssenkrupp.com
Department: Coke oven plants
Address: Friedrich-Uhde-Straße 15
DE-44141 DORTMUND
39
(P)
UNIV NEWCASTLE
Responsible: Prof. Anthony Julian MORRIS
Organisation: UNIV NEWCASTLE
Direct line: +(44) 191/222 7342
Direct fax: +(44) 191/222 5748
UNIVERSITY OF NEWCASTLE UPON TYNE
e-mail: julian.morris@ncl.ac.uk
Department: Process Control
Address: Cassie Building
Kensington Terrace, 6
GB- NEWCASTLE UPON TYNE NE1 7RU
40
Technical Group TGC3 :"Coal combustion, clean and efficient coal technologies, CO2 capture"
Contract N°
RFCR-CT-2005-00006
Reference N°
TGC3.1/05
2.156.685 1.294.011
Duration
Dates:
40 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/10/2008
Title: Development and experimental validation of a mathematical modelling methodology for oxy-fuel combustion for CO2
capture in large power plants
Acronym OXYMOD
:
One promising technology for the improvement of the use of coal as a clean energy source and the use of CO2 capture is the Oxy-Fuel Boiler Technology.
Computerised mathematic models are used for development and design of coal-fired boilers.
Further development of the models is needed to support the demand of mathematic modelling for Oxy-Fuel combustion that will occur in Europe the
coming five years.
The objective for the proposed project is to develop and by experiments validate a mathematical modelling methodology for Oxy-Fuel combustion to be
used in process layout, operation and optimisation of a CO2 free power plant.
State of progress:
Partners
(CO)
VATTENFALL UTV.
Responsible: Mr Leif BRANDELS
Direct line: +(46) 8/ 739 6040
Organisation: VATTENFALL UTV.
Direct fax: +(46) 8/739 6802
VATTENFALL UTVECKLING AB
e-mail: leif.brandels@vattenfall.com
Address: Jämtlandsgatan 99
SE-163 87 STOCKHOLM
(P)
USTUTT
Responsible: Dr. Uwe SCHNELL
Direct line: +(49) 711/685 3574
Direct fax: +(49) 711/685 3491
UNIVERSITÄT STUTTGART
e-mail: schnell@ivd.uni-stuttgart.de
Address: Pfaffenwaldring, 7
DE-70569 STUTTGART
(P)
CUT
Responsible: Prof. Filip JOHNSSON
Organisation: CUT
Direct line: +(46) 31/772 1449
Direct fax: +(46) 31/772 3592
CHALMERS TEKNISKA HÖGSKOLA AB
e-mail: filip.johnsson@me.chalmers.se
Department: Sutainable energy
Address: POBox 41296
SE-41296 GÖTEBORG
(P)
NTUA
Responsible: Prof. Emmanouil KAKARAS
Organisation: NTUA/LSBTP
Direct line: +(30) 210/772 36 62
Direct fax: +(30) 210/772 36 63
NATIONAL TECHNICAL UNIVERSITY OF
ATHENS
Department: Thermal Engineering
Address: 9 Iroon Polytechniou Street
e-mail: ekak@central.ntua.gr
GR-15780 ATHENS
(P)
MBEL
Responsible: Mr Ragi PANESAR
Organisation: MBEL
Direct line: +(44) 141/885 3921
Direct fax: +(44) 141/885 3860
DOOSAN BABCOCK ENERGY LTD
e-mail: rpanesar@mitsuibabcock.com
Department: Boiler Performance
Address: Porterfield Road
GB- RENFREW PA8 4DJ
41
(P)
FLUENT
Responsible: Dr. Christopher CAREY
Direct line: +(44) 114/281 8888
Organisation: FLUENT
Direct fax: +(44) 114/281 8818
FLUENT EUROPE LIMITED
e-mail: chc@fluent.co.uk
Address: Sheffield Airport Business Park
Europa Link
GB- SHEFFIELD S9 1XU
Contract N°
RFCR-CT-2005-00007
Reference N°
TGC3.2/05
2.500.804 1.500.482
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Clean syngas from carbonaceous materials gasification for highly efficient electric energy generation
Acronym CLYCARGAS
:
The principal aim of this project is the production of syngas from gasification of low grade coal and biomass to be directly used for highly efficient electric
energy production (direct combustion in gas turbine, fuel cells).
A gas tar free is required in both applications.
The objective of the present project is to establish the efficiency of different gasification conditions and catalytic tar cracking technologies to obtain the
required gas purity.
Theoretical solutions will be validated by means of appropriate experimental campaigns.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Antonello DI DONATO
Organisation: CSM
Direct line: +(39) 06/505 53 15
Direct fax: +(39) 06/505 54 61
CENTRO SVILUPPO MATERIALI SPA
e-mail: a.didonato@c-s-m.it
Address: Via di Castel Romano 100/102
IT-00128
(P)
INETI
Organisation: INETI
Direct line: +(351) 21/092 47 89
Direct fax: +(351) 21/716 65 69
PT-1649 038 LISBOA
(P)
SOTACARBO
Responsible: Eng. Enrico MAGGIO
Organisation: SOTACARBO
Direct line: +(39) 0781/509 047
Direct fax: +(39) 0781/508 349
SOCIETÀ TECNOLOGIE AVANZATE CARBONE
S.P.A. - SOTACARBO
Address: c/o consorzio industrializzazione
e-mail: emaggio@sotacarbo.it
Sulgis IGL 271
IT-09010 PORTOSCUSO CA
(P)
TECNATOM
Responsible: Mr Andrés SANCHEZ BIEZMA
Organisation: TECNATOM
Direct line: +(34) 91/659 8600
Direct fax: +(34) 91/659 8677
TECNATOM S.A.
e-mail: asanchez@tecnatem.es
Department: New Technologies Unit
Address: Avenida de Montes de Oca 1
ES-28709 SAN SEBASTIAN DE LOS REYES
42
Ext.: 4789
(P)
ENEL
Responsible: Eng. Claudio ZEPPI
Direct line: +(39) 050/618 5644
Organisation: ENEL
Direct fax: +(39) 050/618 5593
ENEL PRODUZIONE SpA
e-mail: claudio.zeppi@enel.it
Address: Via Andrea Pisano 120
IT-56122 PISA
(P)
UNIV NOTTINGHAM
Responsible: Dr. Edward LESTER
Direct line: +(44) 115/951 4974
Direct fax: +(44) 115/951 4115
e-mail: edward.lester@nottingham.ac.uk
Department: School of Chemical, Environmental & Mining
Engineer
(P)
UNIV NEWCASTLE
Responsible: Prof. Keith Mark THOMAS
Organisation: UNIV NEWCASTLE
Direct line: +(44) 191/222 68 39
Direct fax: +(44) 191/222 69 29
UNIVERSITY OF NEWCASTLE UPON TYNE
e-mail: mark.thomas@ncl.ac.uk
Department: NCRL
Address: Cassie Building
Kensington Terrace, 6
GB- NEWCASTLE UPON TYNE NE1 7RU
(P)
KTI
Responsible: Dr. Gaetano IAQUANIELLO
Organisation: KTI
Direct line: +(39) 06/60216 231
Direct fax: +(39) 06/65793 002
TECHNIP K.T.I. SPA
e-mail: iaquaniello.a@ktispa.it
Department: Technology & Business Development
Address: Viale Castello della Magliana 75
IT-00148 ROME
Contract N°
RFCR-CT-2005-00008
Reference N°
TGC3.3/05
2.098.332 1.259.000
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Coal catalytic co-gasification in an innovative rotary Kiln gasifier
Acronym CO.CA.CO.R.K.
:
Aim of this proposal is to demonstrate the opportunity to produce a clean syngas by means of a pioneering approach to co-gasification of coal/biomass or
coal/waste (e.g. tyres, RDF- Refuse Derived Fuel-, etc.).
The novelty consists principally of a new conception rotary kiln gasifier and of an innovative catalytic gasification. The innovative gasifier combines the
high mixing of a fluidised bed gasifier without the need of a fine fixed feed granulometry and without the problem of a high carry over of the latter.
The use of syngas produced in microturbines/internal combustion engines or, after the hydrogen extraction, in fuel cells, will be investigated and the cleanup section suitable for each application will be defined.
This proposal foresees the construction of a small – scale gasifier (5-15 kg/h) for obtaining all the fundamental parameters and technical/economic
information for a further demonstration project.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Claudio LEPORATI
Organisation: CSM
Direct line: +(39) 06/5055 843
Direct fax: +(39) 06/5055 461
e-mail: c.leporati@c-s-m.it
IT-00128
43
(P)
INETI
Organisation: INETI
Direct line: +(351) 21/092 47 89
Direct fax: +(351) 21/716 65 69
PT-1649 038 LISBOA
(P)
SOTACARBO
Responsible: Eng. Alberto PETTINAU
Organisation: SOTACARBO
Direct line: +(39) 0781/509 047
Direct fax: +(39) 0781/508 349
SOCIETÀ TECNOLOGIE AVANZATE CARBONE
S.P.A. - SOTACARBO
Address: c/o consorzio industrializzazione
e-mail: apettinau@sotacarbo.it
Sulgis IGL 271
IT-09010 PORTOSCUSO CA
(P)
ENEL
Responsible: Eng. Claudio ZEPPI
Organisation: ENEL
Direct line: +(39) 050/618 5644
Direct fax: +(39) 050/618 5593
ENEL PRODUZIONE SpA
e-mail: claudio.zeppi@enel.it
IT-56122 PISA
(P)
UNIV NOTTINGHAM
Direct line: +(44) 115/951 4166
Direct fax: +(44) 115/951 4115
(P)
ARI
Responsible: Dr. Maria Luisa PELIZZA
Organisation: ARI
Direct line: +(39) 010/655 8397
Direct fax: +(39) 010/749 0875
ANSALDO RICERCHE SpA
e-mail: marisa.pelizza@ari.ansaldo.it
Address: corso Perrone 25
IT-16152 GENOVA
(P)
UNIZAR
Responsible: Dr. Jesus ARAUZO PÉREZ
Organisation: UNIV ZARAGOZA
Direct line: +(34) 976/761 878
Direct fax: +(34) 976/761 879
UNIVERSIDAD DE ZARAGOZA
e-mail: qtarauzo@unizar.es
Address: c/ Maria de Luna 3
ES-50015 ZARAGOZA
44
Ext.: 4789
Contract N°
RFCR-CT-2005-00009
Reference N°
TGC3.4/05
3.396.235 2.037.743
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/09/2005 31/08/2008 31/08/2008
Title: Utility scale CFB for competitive coal power
Acronym CFB800
:
The development of the unregulated electricity markets has forced the power producers into a new situation. Increased competition brings power producers
more aspects to be taken into account.
Improved competitiveness is the key issue in order to maintain or increase profitability of power generation. In addition, the age profile of the existing
power plants results in a high demand for new power production capacity within the next years.
The replacement or the modernisation of the old power plants utilising modern technology with high steam parameters and high efficiencies would
contribute to the saving of the resources and to the reduction of all kind of emissions.
This would definitely improve public acceptance of coal-fired power plants. However, new investments must be able to compete decades forward in order
to secure competitive power production.
The principal objective of the proposed project is to scale up CFB technology up to utility scale (600 - 800 MWe) to meet the future requirements of power
plant operators at deregulated energy markets.
State of progress:
Partners
(CO)
VTT
Responsible: Dr. Jouni HAMALAINEN
Organisation: VTT
Direct line: +(358) 20/722 25 29
Direct fax: +(358) 20/722 27 49
VTT PROCESSES
e-mail: jouni.hamalainen@vtt.fi
Address: Koivurannantie 1
FI-40101 JYVÄSKYLÄ
(P)
FOSTER W. E.
Responsible: Dr. Timo HYPPÄNEN
Organisation: FOSTER W. E.
Direct line: +(358) 10/393 33 10
Direct fax: +(358) 10/393 33 09
FOSTER WHEELER ENERGIA OY
e-mail: timo.hyppanen@fwfin.fwc.com
Address: Nuijamiestentie 3
FI-00400 HELSINKI
(P)
SIEMENS
Responsible: Dipl. -Ing. Andre SCHRIEF
Organisation: SIEMENS
Direct line: +(49) 9131/188 50 67
Direct fax: +(49) 9131/186 220
SIEMENS AKTIENGESELLSCHAFT
e-mail: andre.schrief@siemens.com
Address: Freyeslebenstraße 1
DE-91050 ERLANGEN
(P)
ENDESA
Responsible: Dr. Juan Carlos BALLESTEROS APARICIO
Organisation: ENDESA
Direct line: +(34) 91/213 12 21
Direct fax: +(34) 91/213 15 75
ENDESA GENERACION SA
e-mail: jcballesteros@endesa.es
Department: Research and Development Unit
Address: Principe de Vergara 187
ES-28002 MADRID
(P)
CIRCE
Responsible: Dr. Cristobal CORTES GRACIA
Organisation: CIRCE
Direct line: +(34) 976/762 034
Direct fax: +(34) 976/732 078
FUNDACION CIRCE- CENTRO DE
INVESTIGACION DE RECURSOS Y CONSUMOS
ENERG.
Department: Thermal Division
Address: Maria de Luna 3
e-mail: tdyfqdb@unizar.es
ES-50018 ZARAGOZA
45
(P)
CERTH
Responsible: Dr. Nikolaos KOUKOUZAS
Direct line: +(30) 24/630 53842
Direct fax: +(30) 24/630 53843
e-mail: koukouzas@techp.demokritos.gr
Kozani
GR-50200 PTOLEMAIS
Contract N°
RFCR-CT-2005-00010
Reference N°
TGC3.5/05
2.996.203 1.797.722
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/06/2005 31/05/2008 31/05/2008
Title: Development of a pilot-scale flameless oxidation burner for ultra low NOx combustion of pulverised coal
Acronym FLOX-COAL
:
The project aims at proving the concept of flameless combustion of coal with the objective of delivering burner designs that are ready for demonstration.
In order to achieve these objectives established methods for R&D in combustion research are used:
• Proof of the concept by experimental investigations at bench scale
• Modelling and simulation to provide suitable tools for up-scaling the burners and designing
suitable boilers.
• Pilot scale testing of the scaled up burners
• Design of industrial applications and assessment of the feasibility of the new technology
State of progress:
Partners
(CO)
USTUTT
Responsible: Ms. Anja SCHUSTER
Direct line: +(49) 711/685 68935
Direct fax: +(49) 711/685 63491
e-mail: anja.schuster@ivd.uni-stuttgart.de
DE-70569 STUTTGART
(P)
EDF
Responsible: Dr. Pierre PLION
Organisation: EDF
Direct line: +(33) 1/30 87 77 15
Direct fax: +(33) 1/30 87 79 16
ELECTRICITE DE FRANCE
e-mail: pierre.plion@edf.fr
Address: 6 Quai Watier
FR-78401 CHATOU CEDEX
(P)
MBEL
Responsible: Mr Gerard HESSELMANN
Organisation: MBEL
Direct line: +(44) 141/885 38 58
Direct fax: +(44) 141/885 38 60
DOOSAN BABCOCK ENERGY LTD
e-mail: ghesselmann@mitsuibabcock.com
Department: Combustion Technologies
Address: Porterfield Road
GB- RENFREW PA8 4DJ
(P)
WS
Responsible: Dr. Joachim G. WÜNNING
Organisation: WS
Direct line: +(49) 71/59 163 20
Direct fax: +(49) 71/59 27 38
WS WÄRMEPROZESSTECHNIK GmbH
e-mail: j.g.wuenning@flox.com
Address: Dornierstrasse 14
DE-71272 RENNINGEN
46
(P)
INSA ROUEN
Responsible: Dr. David HONORE
Organisation: INSA ROUEN
Direct line: +(33) 2/32 95 98 52
Direct fax: +(33) 2/32 95 97 80
INSTITUT NATIONAL DES SCIENCES
APPLIQUEES DE ROUEN
Address: Site Universitaire du Madrillet
e-mail: david.honore@coria.fr
FR-76801 ST. ETIENNE DU ROUVRAY
(P)
NTUA
Direct line: +(30) 210/772 36 62
Direct fax: +(30) 210/772 36 63
ATHENS
GR-15780 ATHENS
(P)
RWTH
Responsible: Prof. Dr. -Ing. Reinhold KNEER
Organisation: RWTH
Direct line: +(49) 241/809 54 00
Direct fax: +(49) 241/809 21 43
RHEINISCH-WESTFÄLISCHE TECHNISCHE
HOCHSCHULE AACHEN
Address: Templergraben 55
e-mail: kneer@wuek.rwth-aachen.de
DE-52062 AACHEN
(P)
IEN
Responsible: Dr.Eng. Tomasz GOLEC
Organisation: IEN
Direct line: +(48) 22/34 51 418
Direct fax: +(48) 22/642 83 78
INSTYTUT ENERGETYKI - THERMAL
PROCESSES DEPARTMENT
Department: Thermal Processes
Address: ul. Augustowka 5
e-mail: tomasz.golec@ien.com.pl
PL-02 981 WARSAW
(P)
ELOPOLE
Responsible: M.Sc. Edward KINAL
Organisation: ELOPOLE
Direct line: +(48) 77/423 57 20
Direct fax: +(48) 77/423 57 44
ELEKTROWNIA OPOLE SA
e-mail: edward.kinal@elopole.com.pl
Department: Boiler
Address:
PL-46-021 BRZEZIE K/ OPOLA
47
Contract N°
RFC2-CT-2006-00005
Reference N°
TGC3.01/06
290.353
186.902
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2007 31/12/2007
Title: Clean coal technology R, D&D promotion and dissemination
Acronym CCTPROM
:
This Type 2 accompanying measure will complement and provide added value for coal utilisation R, D&D activities managed by the European
Commission, under the ECSC and RFCS programmes. This will be achieved by promoting and disseminating the scope and achievements of the ECSC and
RFCS projects on coal-fired power generation R, D&D, to the major coal using new member and candidate states of the EU. It will also promote the
rationale for the strategic priorities and mode of operation of the RFCS programme, to encourage a more informed cooperation between the R,D&D
organisations within the EU-15 and Poland, Czech Republic, Rumania and Bulgaria.
Activities will include demonstrating the value of coal utilisation R, D&D towards
establishing a sustainable energy mix for Europe while ensuring that EU coal based
stakeholders can remain competitive within a global context. This will involve interaction with strategic decision makers, stakeholders and R&D
organisations of the EU-15 and the four designated countries through promotion and dissemination via brochures, web based links and workshops.
State of progress:
Research technically completed; publication in hand
Partners
(CO)
IEA
Responsible: Dr. Andrew MINCHENER
Organisation: IEA
Direct line: +(44) 1452/857 559
Direct fax: +(44) 1452/857 559
IEA COAL RESEARCH LIMITED
e-mail: andrew@minchener.fsnet.co.uk
Address: Gemini House, 10/18
Putney Hill
GB- LONDON SW15 6AA
(P)
SUT
Responsible: Dr. Andrzej SZLEK
Organisation: SUT
Direct line: +(48) 32/237 10 41
Direct fax: +(48) 32/237 28 72
SILESIAN UNIVERSITY OF TECHNOLOGY POLITECHNIKA SLASKA
Address: Akademicka street 2A
e-mail: aszlek@polsl.pl
PL-44 100 GLIWICE
(P)
SEVEn
Responsible: Dipl. Eng. Bohuslav MALEK
Organisation: SEVEn
Direct line: +(420) 224/252 115
Direct fax: +(420) 224/247 597
SEVEN - STREDISKO PRO EFEKTIVNI
VYUZIVANI ENERGIE o.p.s.
Address: Americka 17
e-mail: bohuslav.malek@svn.cz
CZ-12000 PRAGUE 2
(P)
ISPE
Responsible: Dr. Carmencita CONSTANTIN
Organisation: ISPE
Direct line: +(40) 21/206 12 66
Direct fax: +(40) 21/210 24 57
INSTITUTUL DE STUDII SI PROIECTARI
ENERGETICE SA
Department: Studies and International Programs
Address: Blvd Lacul Tei 1-3 Sector 2
e-mail: cconstantin@ispe.ro
RO-020371 BUCHAREST
48
Contract N°
RFCP-CT-2006-00011
Reference N°
TGC3.02/06
3.250.225 1.300.090
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: CO2 emission reduction through combustion optimisation technologies at coal-fired power plants
Acronym CERCOT
:
This project is devoted to the development and full-scale validation of technologies for reducing CO2 emissions in pulverised coal power plants, by means
of increased efficiency and fuel flexibility strategies.
The approach to be used relies on the following complementary scopes:
- Adaptation and industrial application of a novel combustion control based on in-furnace monitoring, which was successfully developed in a previous
ECSC project for Nox optimisation.
- Development of a novel burner with higher fuel flexibility capabilities.
Fuel scenarios to be considered include combustion of different types of coals and coal/biomass cofiring.
State of progress:
Research technically completed; no publication foreseen
Partners
(CO)
ENDESA
Direct line: +(34) 91/213 12 21
Direct fax: +(34) 91/213 15 75
ES-28002 MADRID
(P)
INERCO
Responsible: Dr. Francisco RODRIGUEZ BAREA
Organisation: INERCO
Direct line: +(34) 954/468 100
Direct fax: +(34) 954/461 329
INGENIERIA ENERGETICA Y DE
CONTAMINACION S.A.
Department: Process Engineering Group
Address: Parque Tecnologico de la Cartuja
e-mail: frodriguez@inerco.es
C/Tomas Alba Edison s/n
ES-41092 SEVILLA
(P)
CERTH
Responsible: Dr. Panagiotis GRAMMELIS
Direct line: +(30) 210/650 1593
Direct fax: +(30) 210/652 7539
e-mail: grammelis@certh.gr
Kozani
GR-50200 PTOLEMAIS
(P)
ANSALDO CALDAIE
Responsible: Ing. Alessandro SAPONARO
Organisation: ANSALDO CALDAIE
Direct line: +(39) 080/3480246
Direct fax: +(39) 080/3480300
ANSALDO CALDAIE S.p.A.
e-mail: alessandro.saponaro@ansaldoboiler.it
Address: Via Milano km 1,600
IT-70023 GIOIA DEL COLLE (BA)
(P)
ECOENERGIA
Responsible: M. Sc. Eng. Jan SIWINKSI
Organisation: ECOENERGIA
Direct line: +(48) 22/666 16 01
Direct fax: +(48) 22/666 16 00
ECOENERGIA Sp ZOO
e-mail: j.siwinski@ecoenergia.com.pl
Address: Lustrzana 32
PL-01-342 WARSAW
49
Contract N°
RFCR-CT-2006-00006
Reference N°
TGC3.03/06
2.324.489 1.394.693
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Abatement of emissions of trace pollutants by FGD from co-combustion and environmental characteristics of by-products
Acronym ABETRAP
:
The project focuses on three main topics: a) The assessment of the environmental
characteristics of all the solid residues (ash, slag or FGD gypsum) produced in power plants burning coal alone or coal combined with other secondary fuel,
taking into account the 2003/33/CE Directive on waste disposal recently put in force. According to this standard, the classification of several combustion
by-products traditionally treated (disposed) as an inert or non-hazardous waste or with industrial applications in many EU member states, will have to be
revised; b) The evaluation of the abatement capacity for trace pollutant emissions of wet FGD facilities, also trying new additives, and c) the leachability of
these pollutants from the end by-product, studying if necessary possible remediation actions in order to facilitate the reuse of the FGD gypsum. The study is
carried out in several EU power plants under (co-) combustion strategies equipped with FGD facilities. In addition, the project can also be useful in relation
to the advent of new emission regulations in coal power plants.
State of progress:
Partners
(CO)
ENDESA
Direct line: +(34) 91/213 12 21
Direct fax: +(34) 91/213 15 75
ES-28002 MADRID
(P)
CSIC
Responsible: Dr. Xavier QUEROL
Organisation: CSIC
Direct line: +(34) 93/4095410
Direct fax: +(34) 93/4110012
CONSEJO SUPERIOR DE INVESTIGACIONES
CIENTIFICAS - INST JAUME ALMERA
Address: Marti I Franques s/n
e-mail: xavier.querol@ija.csic.es
ES-08028 BARCELONA
(P)
CERTH
Direct line: +(30) 24/630 53842
Direct fax: +(30) 24/630 53843
Kozani
GR-50200 PTOLEMAIS
(P)
UNIV SEVILLA
Responsible: Prof. Constantino FERNANDEZ PEREIRA
Organisation: AICIA
Direct line: +(34) 95/448 72 71
Direct fax: +(34) 95/446 17 75
ASOCIACION DE INVESTIGACION Y
COOPERACION IND. ANDALUCIA
Address: Camino de los Descubrimientos s/n
e-mail: pereira@esi.us.es
ES-41092 SEVILLA
(P)
UNIV NOTTINGHAM
Responsible: Dr. Mercedes MAROTO-VALER
Direct line: +(44) 115/846 68 93
Direct fax: +(44) 115/951 41 15
e-mail: mercedes.maroto-valer@nottingham.ac.uk
50
(P)
KEMA
Responsible: Dr. Rudolf MEIJ
Direct line: +(31) 26/356 22 25
Organisation: KEMA
Direct fax: +(31) 26/445 46 59
KEMA NEDERLAND BV
e-mail: ruud.meij@kema.com
Address: Utrechtseweg 310
NL-6800 ET ARNHEM
Contract N°
RFCR-CT-2006-00007
Reference N°
TGC3.04/06
2.364.382 1.418.630
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Cost effective and environmental friendly oxyfuel combustion of hard coals
Acronym FriendlyCoal
:
The FriendlyCoal proposal focuses on advanced boiler concepts for CO2-free hard coal fired power plants with oxyfuel technology.
The main challenge of this technology is the high combustion temperature from the combustion with pure oxygen. The commonly discussed concept to
overcome this problem is the recirculation of significant amounts of CO2.
The focus of this project is to compare this commonly discussed concept with a newly invented concept - the inversely staged combustion.
The project includes the burner and boiler design for an 300 MWth hard coal fired power plant and in particular the testing of a newly design 3 MW burner.
State of progress:
Partners
(CO)
TUM
Responsible: Prof. Dr.-Ing. Hartmut SPLIETHOFF
Organisation: TUM-FAR
Direct line: +(49) 89/289 16270
Direct fax: +(49) 89/289 16271
TECHNISCHE UNIVERSITÄT MÜNCHEN FACHGEBIET AUGMENTED REALITY
Department: Lehrstuhl für Energiesysteme
Address: Boltzmann Strasse 15
e-mail: spliethoff@tum.de
DE-85747 GARCHING
(P)
SIEMENS
Responsible: Dr.-Ing. Joachim FRANKE
Organisation: SIEMENS
Direct line: +(49) 9131/18 62 34
Direct fax: +(49) 9131/18 62 14
SIEMENS AKTIENGESELLSCHAFT
e-mail: joachim.franke@siemens.com
Department: BENSON Boiler Technology
Address: Freyeslebenstraße 1
DE-91050 ERLANGEN
(P)
ENEL
Responsible: Ing. Giancarlo BENELLI
Organisation: ENEL
Direct line: +(39) 050/618 56 28
Direct fax: +(39) 050/618 56 51
ENEL PRODUZIONE SpA
e-mail: giancarlo.benelli@enel.it
IT-56122 PISA
(P)
DTU
Responsible: Prof. Anker DEGN JENSEN
Organisation: DTU
Direct line: +(45) 45/25 28 41
Direct fax: +(45) 45/88 22 58
DANMARKS TEKNISKE UNIVERSITET
e-mail: aj@kt.dtu.dk
Address: Anker Engelundsvej 1
DK-2800 KONGENS LYNGBY
51
(P)
TECH UNIV GRAZ
Responsible: Dr. Ulrich HOHENWARTER
Organisation: TU GRAZ
Direct line: +(43) 316/873 7810
Direct fax: +(43) 316/873 7305
GRAZ UNIVERSITY OF TECHNOLOGY
e-mail: ulrich.hohenwarter@tugraz.at
Address: Rechbauerstrasse 12
AT-8010 GRAZ
(P)
AE&E
Responsible: Dr. Paul RENETZEDER
Telephone: +(43) 316/501 226
Organisation: AE&E
Fax: +(43) 316/501 246
AUSTRIAN ENERGY & ENVIRONMENT
AG&CoG
Department: R & D
Address: Wagner Biro Platz 1
e-mail:
AT-8074 RAABA/GRAZ
Contract N°
RFCR-CT-2006-00008
Reference N°
TGC3.05/06
2.073.614 1.244.169
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Intelligent monitoring and selective cleaning control of deposits in pulverised coal boilers
Acronym CLEAN SELECTIVE
:
The scientific objective of this proposal is to develop an integrated On-line tool to locally monitor and detect slagging and fouling in the whole boiler
including convective and radiative part in order to allow selective cleaning of the heat exchangers. The main elements of the integrated tool will be:
• Utilisation of process data like flow rates, temperatures etc. of the power plant, existing signals of the heat flux sensors of the Teruel power station
(Spain) and acoustic pyrometry measurements of the furnace exit temperature (distribution)
• New fouling sensors for convective heat exchangers
• 3-dimensional CFD-modelling of the combustion, fluid flow and heat transfer in the radiative and convective heat exchangers of the boiler and calculation
of ash deposition to indicate areas of ash deposition
• Combination of the CFD-modelling with thermodynamic modelling of the water steam cycle
State of progress:
Partners
(CO)
TUM
Responsible: Prof. Dr.-Ing. Hartmut SPLIETHOFF
Organisation: TUM-FAR
Direct line: +(49) 89/289 16270
Direct fax: +(49) 89/289 16271
TECHNISCHE UNIVERSITÄT MÜNCHEN FACHGEBIET AUGMENTED REALITY
Department: Lehrstuhl für Energiesysteme
Address: Boltzmann Strasse 15
e-mail: spliethoff@tum.de
DE-85747 GARCHING
(P)
CIRCE
Responsible: Dr. Cristobal CORTES GRACIA
Organisation: CIRCE
Direct line: +(34) 976/762 034
Direct fax: +(34) 976/732 078
FUNDACION CIRCE- CENTRO DE
INVESTIGACION DE RECURSOS Y CONSUMOS
ENERG.
Department: Thermal Division
Address: Maria de Luna 3
e-mail: tdyfqdb@unizar.es
ES-50018 ZARAGOZA
52
(P)
ENDESA
Direct line: +(34) 91/213 12 21
Direct fax: +(34) 91/213 15 75
ES-28002 MADRID
(P)
CLYDE BERGEMANN
Responsible: Dipl. Ing. Stephan SIMON
Organisation: CLYDE BERGEMANN
Direct line: +(49) 281/815 120
Direct fax: +(49) 281/815 449
CLYDE BERGEMANN GmbH MASCHINEN UND
APPARATEBAU
Address: Schillwiese 20
e-mail: ssimon@cbw.de
DE-46485 WESEL
(P)
CERTH
Direct line: +(30) 24/630 53842
Direct fax: +(30) 24/630 53843
Kozani
GR-50200 PTOLEMAIS
(P)
ECN
Responsible: Dr. Ir. Rob KORBEE
Direct line: +(31) 224/56 47 07
Organisation: ECN
Direct fax: +(31) 224/56 84 87
ENERGY RESEARCH CENTRE OF THE
NETHERLANDS
Address: Westerduinweg 3
e-mail: korbee@ecn.nl
NL-1755 LE PETTEN
Contract N°
RFCR-CT-2006-00009
Reference N°
TGC3.06/06
1.444.391
866.634
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Development of advanced large scale low NOx oxy-fuel burner for PF combustion
Acronym OxyBurner
:
A promising technology for improvement of use of coal as a clean energy source and CO2 capture is Oxy-Fuel Combustion.
Important research activities in this field are in progress. However, works performed so far has mainly dealt with investigations on process feasibility, its
potential contribution to CO2 reduction and process optimisation. Detailed
investigations on burner design are lacking.
Proposed project therefore seeks to develop an advanced low NOx oxy-fuel burner concept for Lignite and Sub-Bituminous Coals, which is economic,
efficient and clean. Results from proposed 30 MW oxy-fuel plant of Vattenfall will also be available for up-scaling the burner concept.
State of progress:
Partners
(CO)
USTUTT
Responsible: Mr Jörg MAIER
Direct line: +(49) 711/685 3396
Direct fax: +(49) 711/685 3491
e-mail: maier@ivd.uni-stuttgart.de
DE-70569 STUTTGART
53
(P)
AIR LIQUIDE
Responsible: Mrs Emmanuelle BROMET
Organisation: AIR LIQUIDE
Direct line: +(33) 1/39 07 65 38
Direct fax: +(33) 1/39 07 61 13
L'AIR LIQUIDE
e-mail: emmanuelle.bromet@airliquide.com
Department: Combustion and chemical refining
Address: 1 chemin de la Porte des Loges
Les loges en Josas
FR-78354 JOUY EN JOSAS
(P)
ALSTOM
Responsible: Dipl.-Ing. Frank KLUGER
Organisation: ALSTOM
Direct line: +(49) 711/917 1029
Direct fax: +(49) 711/917 1239
ALSTOM POWER SYSTEMS GmbH
e-mail: frank.kluger@power.alstom.com
Department: Department Research and Technology
Address: Boveristrasse 22
DE-68309 MANNHEIM
(P)
VEG
Responsible: Mr Norbert JENTSCH
Direct line: +(49) 355/2887 3733
Organisation: VEG
Direct fax: +(49) 355/2887 3186
VATTENFALL EUROPE GENERATION AG &
CO. KG
Address: Vom-Stein-Strasse 39
e-mail: norbert.jentsch@vattenfall.de
DE-03050 COTTBUS
(P)
NTUA
Direct line: +(30) 210/772 36 62
Direct fax: +(30) 210/772 36 63
ATHENS
GR-15780 ATHENS
Contract N°
RFCR-CT-2006-00010
Reference N°
TGC3.07/06
1.622.372
973.423
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Application of the biomass, oxyfuel and flameless combustion for the utilisation of pulverised coals for electricity
generation
Acronym BOFCom
:
This project will combine the three most advantageous new technologies for the future reduction of CO2 emissions from pulverized coal fuel fired power
plants and
simultaneously maintain high efficiencies and low emissions and be able to use a wide variety of (European) coals. These three techniques include the
combination of Biomass-Oxyfuel-Flameless Combustion. Biomass co-firing has a CO2 neutral
characterisitic, Oxy-Coal firing plus flue gas recirculation will result in increased flue gas CO2 levels which can more easily be separated and sequestrated
and Flameless Combustion has the advantage of extremely high efficiencies in combination with uniform heat transfer and very low emissions. A
combination of these three technologies, especially for coal, has not been investigated before.
State of progress:
Partners
54
(CO)
ECN
Responsible: Ir. Willem VAN DE KAMP
Organisation: ECN
Direct line: +(31) 224/564 722
Direct fax: +(31) 224/568 487
NETHERLANDS
e-mail: vandekamp@ecn.nl
NL-1755 LE PETTEN
(P)
IEN
Direct line: +(48) 22/34 51 418
Organisation: IEN
Direct fax: +(48) 22/642 83 78
PL-02 981 WARSAW
(P)
TU CLAUSTHAL
Responsible: Prof. Dr. -Ing. Roman WEBER
Direct line: +(49) 5323/72 20 34
Direct fax: +(49) 5323/72 31 55
TECHNISCHE UNIVERSITÄT CLAUSTHAL
e-mail: weber@ievb.tu-clausthal.de
Address: Agricolastrasse 4
(P)
RWE NPOWER
Responsible: Dr. Michael WHITEHOUSE
Organisation: RWE NPOWER
Direct line: +(44) 1793/894 118
Direct fax: +(44) 1793/896 251
RWE NPOWER PLC
e-mail: michael.whitehouse@rwenpower.com
Department: Fuels and Combustion
Address: Trigonos, Windmill Hill Business Park,
Whitehill Way
GB- SWINDON SN5 6PB
(P)
IST
Responsible: Dr. Joao TOSTE AZEVEDO
Organisation: IST
Direct line: +(351) 218/417 993
Direct fax: +(351) 218/475 545
INSTITUTO SUPERIOR TECNICO
e-mail: toste@navier.ist.utl.pt
Address: Avenida Rovisco Pais
PT-1049 001 LISBOA
Contract N°
RFCR-CT-2007-00007
Reference N°
TGC3.01/07
2.479.480 1.487.687
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/10/2007 30/09/2010 30/09/2010
Title: High capacity sorbents and optimization of existing pollution control technologies for mercury capture in industrial
combustion systems
Acronym MERCURYCAP
:
This proposal addresses the global problem of mercury (Hg) emissions from coal-fired plants and the current position of conventional air pollution control
devices (APCDs) only providing partial solution for oxidized Hg capture, particularly for low-rank coals. Our previous work has shown that (1) low-cost
gasification chars have superior mercury capture performance than current benchmark carbons; and (2) manganese oxide compounds sorb mercury and also
act as catalysts to promote mercury oxidation, that can then be subsequently captured in existing APCDs. Accordingly, the two-fold objective is to further
develop low-cost injection sorbents, and maximize mercury oxidation and its subsequent capture in existing APCDs. Fundamental studies will be followed
by extensive testing in pilot and full scale systems to evaluate the performance of the developed materials under actual plant conditions.
State of progress:
Partners
55
(CO)
UNIV NOTTINGHAM
Responsible: Dr. Mercedes MAROTO-VALER
Direct line: +(44) 115/846 68 93
Direct fax: +(44) 115/951 41 15
e-mail: mercedes.maroto-valer@nottingham.ac.uk
(P)
ENEL
Responsible: Dr. Ing. Gennaro DE MICHELE
Organisation: ENEL
Direct line: +(39) 050/618 5606
Direct fax: +(39) 050/618 5505
ENEL PRODUZIONE SpA
e-mail: gennaro.demichele@enel.it
Department: Technical Area Research
IT-56122 PISA
(P)
ECN
Responsible: Dr. Ir. Jacob H.A. KIEL
Organisation: ECN
Direct line: +(31) 224/564 590
Direct fax: +(31) 224/568 487
NETHERLANDS
e-mail: kiel@ecn.nl
NL-1755 LE PETTEN
(P)
CSIC
Responsible: Dr. M. Rosa MARTINEZ-TARAZONA
Direct line: +(34) 985/118 988
Direct fax: +(34) 985/297 662
e-mail: rmtarazona@incar.csic.es
Apdo. Correos 73
ES-33080 OVIEDO
(P)
HUNOSA
Responsible: Mr. Luis DIAZ FERNANDEZ
Direct line: +(34) 985/446 055
Organisation: HUNOSA MIERES
Fax: +(34)
e-mail: luisd@hunosa.es
Address: C.T. La Pereda
Cardeo s/n
ES-33682 MIERES
(P)
CIEMAT
Responsible: Dr. Alberto BAHILLO
Organisation: CIEMAT
Direct line: +(34) 91/346 6701
Direct fax: +(34) 91/346 6269
CENTRO DE INVESTIGACIONES ENERGÉTICAS
MEDIOAMBIENTALES Y TECNOLÓGICAS
Department: Energy
Address: Avda Complutense 22
e-mail: alberto.bahillo@ciemat.es
ES-28040 MADRID
(P)
USTUTT
Responsible: Dipl. -Ing. Kevin BRECHTEL
Direct line: +(49) 711/685 63 567
Direct fax: +(49) 711/685 63 491
e-mail: brechtel@ivd.uni-stuttgart.de
Department: Institut für Verfahrenstechnik un Dampfkesselwesen
DE-70569 STUTTGART
56
(P)
JM
Responsible: Dr. Stan GOLUNSKI
Direct line: +(44) 118/924 2186
Organisation: JM
Direct fax: +(44) 118/924 2254
JOHNSON MATTHEY PLC
e-mail: golunse@matthey.com
Address: 40-42 Hatton Garden
UK- LONDON EC1N 8EE
Contract N°
RFCR-CT-2007-00008
Reference N°
TGC3.02/07
1.887.164 1.061.839
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Optimisation of SCR-DeNOx catalyst performance related to deactivation and mercury oxidation
Acronym DENOPT
:
DENOPT addresses the topic “Efficient protection of the environment and improvement of coal as clean energy source” focusing on the improvement of
SCR DeNOx performance related to deactivation and mercury oxidation. The goal of the project is to develop novel catalyst materials and improve
regeneration processes to reduce ammonia consumption and improve catalyst lifetime. In parallel it is aimed to improve mercury oxidation to achieve an
overall mercury removal rate higher than 90% incorporating a multi pollutant control strategy combining SCR, ESP and FGD.
Furthermore a 3D-CFD model will be developed predicting NOx reduction, mercury oxidation and being sensitive to catalyst deactivation.
State of progress:
Partners
(CO)
USTUTT
Responsible: Dipl. -Ing. Kevin BRECHTEL
Direct line: +(49) 711/685 63 567
Direct fax: +(49) 711/685 63 491
e-mail: brechtel@ivd.uni-stuttgart.de
Department: Institut für Verfahrenstechnik un Dampfkesselwesen
DE-70569 STUTTGART
(P)
ENEL
Responsible: Dr. Ing. Gennaro DE MICHELE
Organisation: ENEL
Direct line: +(39) 050/618 5606
Direct fax: +(39) 050/618 5505
ENEL PRODUZIONE SpA
e-mail: gennaro.demichele@enel.it
Department: Technical Area Research
IT-56122 PISA
(P)
FRAUENTHAL
Responsible: Dipl. -Ing. Kurt OREHOVSKY
Organisation: FRAUENTHAL
Direct line: +(43) 3462/200 02 85
Direct fax: +(43) 3462/200 03 11
PORZELLANFABRIK FRAUENTHAL GMBH
e-mail: kurt.orehovsky@frauenthal.net
Address: Prinz-Eugen-Strasse 30/4a
AT-1040 WIEN
(P)
EONE
Responsible: Dipl. -Ing. Jürgen BRANDENSTEIN
Organisation: EONE
Direct line: +(49) 209/601 64 30
Direct fax: +(49) 209/601 64 03
E.ON ENGINEERING GMBH
e-mail: juergen.brandenstein@eon-engineering.com
Department: Analytical Division
Address: Alexander-von-Humboldt-Strasse 1
DE-45896 GELSENKIRCHEN
57
(P)
ENBW.KWG
Responsible: Dr. Sven UNTERBERGER
Organisation: ENBW.KWG
Direct line: +(49) 711/2181 449
Direct fax: +(49) 711/2181 506
ENBW KRAFTWERKE AG
e-mail: s.unterberger@enbw.com
Address: Lautenschlagerstrasse 20
DE-70173 STUTTGART
(P)
RECOM
Responsible: Dr. Xiaohai HAN
Direct line: +(49) 711/68689 144
Organisation: RECOM
Direct fax: +(49) 711/68689 149
RECOM SERVICES GMBH
e-mail: x.han@recom-services.de
Address: Nobelstrasse 15
DE-70569 STUTTGART
(P)
REINT
Responsible: Dr. Constance SENIOR
Direct line: +(1) 801/364 6925
Organisation: REINT
Direct fax: +(1) 801/364 6977
REACTION ENGINEERING INTERNATIONAL
e-mail: senior@reaction-eng.com
Address: 77 West 200 South, Suite 210
US-84101 SALT LAKE CITY
Contract N°
RFCR-CT-2007-00009
Reference N°
TGC3.03/07
2.591.775 1.555.064
Duration
Dates:
39 (Mths)
Starting
Ending
Actual
1/07/2007 30/09/2010 30/09/2010
Title: Enhanced capture with oxygen for scrubbing of CO2
Acronym ECO-Scrub
:
The project aims to develop a scheme for retrofitting carbon capture to existing boilers. It uses a novel combination of techniques employed in conventional
CO2 capture, such as oxygen enrichment and post-combustion solvent scrubbing, together with measures to increase efficiency, reduce steam consumption
and generate power requirements without significantly reducing net boiler electricity generating capacity. The project inlcudes development of the process,
module integration and optimisation for a range of plant types and fuels. Fundamental studies also address many issues relevant to conventional capture, so
the fundamental work has wide applicability to new plant and extends ongoing carbon capture research.
State of progress:
Partners
(CO)
RWE NPOWER
Responsible: Dr. Gerry RILEY
Organisation: RWE NPOWER
Direct line: +(44) 1793/896 298
Direct fax: +(44) 1793/896 251
RWE NPOWER PLC
e-mail: gerry.riley@rwenpower.com
Department: Fuels and Combustion
Address: Trigonos, Windmill Hill Business Park,
Whitehill Way
GB- SWINDON SN5 6PB
(P)
AUTH
Responsible: Prof. George SAKELLAROPOULOS
Organisation: AUTH
Direct line: +(30) 23/10996 271
Direct fax: +(30) 23/10996 168
e-mail: sakel@vergina.eng.auth.gr
58
(P)
CSIC
Responsible: Mr José Manuel ANDRES GIMENO
Organisation: CSIC-ICB
Direct line: +(34) 976/733 977
Direct fax: +(34) 976/733 318
INSTITUTO DE CARBOQUIMICA
e-mail: jmandres@carbon.icb.csic.es
Address: Miguel Luesma Castan, 4
ES-50015 ZARAGOZA
(P)
ECN
Responsible: Ir. Willem VAN DE KAMP
Organisation: ECN
Direct line: +(31) 224/564 722
Direct fax: +(31) 224/568 487
NETHERLANDS
e-mail: vandekamp@ecn.nl
NL-1755 LE PETTEN
(P)
CERTH
Responsible: Dr. Panagiotis GRAMMELIS
Direct line: +(30) 210/650 1593
Direct fax: +(30) 210/652 7539
e-mail: grammelis@certh.gr
Kozani
GR-50200 PTOLEMAIS
(P)
UNIV LEEDS
Responsible: Dr. Bernard GIBBS
Organisation: UNIV LEEDS
Direct line: +(44) 113/343 2496
Direct fax: +(44) 113/246 7310
UNIVERSITY OF LEEDS
e-mail: b.m.gibbs@leeds.ac.uk
Address: Woodhouse Lane
GB- LEEDS LS2 9JT
(P)
PPC
Responsible: Dipl.Ing. Leandros GEORGOULIS
Organisation: PPC
Direct line: +(30) 210/822 1216
Direct fax: +(30) 210/823 3182
GENERATION DIVISION / PPC.
e-mail: georgoulis@dmkt.dei.gr
Address: Chalkokondili street 30
GR-10432 ATHENS
(P)
RWE POWER
Responsible: Dr. Matthias KRUMBECK
Organisation: RWE POWER
Direct line: +(49) 201/122 05 52
Direct fax: +(49) 201/122 74 08
RWE POWER AG
e-mail: matthias.krumbeck@rwe.com
Address: Huyssenallee 2
DE-45128 ESSEN
59
Contract N°
RFCP-CT-2008-00008
Reference N°
TGC3.01/08
6.421.724 2.270.771
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2012 30/06/2012
Title: Emission free chemical looping coal combustion process
Acronym ECLAIR
:
Chemical-looping combustion (CLC) for coal is a zero-emission technology, combining very low efficiency penalty (2-3%) and low CO2 capture cost,
about 10€/ton CO2. Key issues for coal-CLC are: adequate technical solutions to reactors/surrounding systems; oxygen-carrier performance/behaviour and
interaction with fuel; actual demonstration of technology.
The proposal involves scale-up to 1-MWth pilot and experimental/theoretical work to provide basis for design and optimization. This includes
investigation of oxygen-carrier interaction with fuel and long-term stabilility; development of tools/models to identify best reactor design and process
layout; solutions for emission control; testing in 1-MWth plant and technical, environmental and economical assessment including 450-MW unit.
State of progress:
Partners
(CO)
ALSTOM
Responsible: Ms Corinne BEAL
Direct line: +(33) 1/46 29 16 05
Direct fax: +(33) 1/46 29 15 56
ALSTOM POWER BOILERS
e-mail: corinne.beal@power.alstom.com
Department: R&D
Address: 23-25 Avenue Morane Saulnier
FR-92364 MEUDON LA FORET
(P)
TU DARMSTADT
Responsible: Prof. Bernd EPPLE
Organisation: TU DARMSTADT
Direct line: +(49) 6151/164 717
Direct fax: +(49) 6151/165 685
TECHNISCHE UNIVERSITAT DARMSTADT
e-mail: bernd.epple@est.tu-darmstadt.de
Department: EST - Energy Systems and Technology
Address: Petersenstraße 30
DE-64277 DARMSTADT
(P)
CUT
Responsible: Prof Anders LYNGFELT
Organisation: CUT
Direct line: +(46) 31/772 14 27
Direct fax: +(46) 31/772 35 92
e-mail: anders.lyngfelt@chalmers.se
SE-41296 GÖTEBORG
(P)
ALSTOM
Responsible: Dr. Michal BIALKOWSKI
Direct line: +(41) 56/46 658 07
Direct fax: +(41) 56/46 658 70
ALSTOM SWITZERLAND LTD
e-mail: michal.bialkowski@power.alstom.com
Department: Development
Address: Brown Boveri Strasse 7
CH-5401 BADEN
(P)
CSIC
Responsible: Dr. Juan ADANEZ
Organisation: CSIC-ICB
Direct line: +(34) 976/733 977
Direct fax: +(34) 976/733 977
INSTITUTO DE CARBOQUIMICA
e-mail: jadanez@icb.csic.es
Address: Miguel Luesma Castan, 4
ES-50015 ZARAGOZA
60
(P)
SINTEF
Responsible: Dr. Rune BREDESEN
Direct line: +(47) 938/11 279
Organisation: SINTEF
Direct fax: +(47) 22/06 73 50
SINTEF _MATERIALS AND CHEMISTRY,
ENERGY CONVERSION AND MATERIALS
Address: PO Box 314
e-mail: rune.bredesen@sintef.no
NO-0314 BLINDERN OSLO
(P)
AIR LIQUIDE
Responsible: Mr Christophe CLAEYS
Direct line: +(33) 1/39 07 65 94
Direct fax: +(33) 1/39 07 61 13
L'AIR LIQUIDE
e-mail: christophe.claeys@airliquide.com
Department: Process and Energy Group
Address: 1 chemin de la Porte des Loges
Les loges en Josas
FR-78354 JOUY EN JOSAS
(P)
VATTENFALL UTV.
Responsible: Dr. Marie ANHEDEN
Direct line: +(46) 8/739 62 12
Organisation: VATTENFALL UTV.
Direct fax: +(46) 8/739 68 02
VATTENFALL UTVECKLING AB
e-mail: marie.anheden@vattenfall.com
Address: Jämtlandsgatan 99
SE-163 87 STOCKHOLM
Contract N°
RFCR-CT-2008-00009
Reference N°
TGC3.02/08
2.291.358 1.374.814
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Intelligent control and optimisation of power station boilers firing pulverised coal and coal/biomass blends
Acronym SMARTBURN
:
This proposal is concerned with the development of innovating, monitoring control and optimisation systems to improve the performance of burners and
boilers fired by pulverised coal and coal/biomass blends. As a consequence CO2, NOx and SO2 emissions will be reduced and the project will also
enhance the ability of utility boilers to burn coal/biomass mixtures. The proposed systems are:
- A system for monitoring and control of individual burners using low cost sensors and artificial intelligence.
- A combustion optimisation system for an arch-fired boiler using 'local' automatic gas sampling systems.
- Optimisation of a flue gas desulphurisation plant.
State of progress:
Partners
(CO)
UG
Responsible: Prof. Steven WILCOX
Organisation: UG
Direct line: +(44) 1443/482 810
Direct fax: +(44) 1443/483 578
UNIVERSITY OF GLAMORGAN
e-mail: sjwilcox@glam.ac.uk
Department: Intelligent Systems Engineering
Address: Llantwit Road Treforest
GB- PONTYPRIDD CF37 1DL
(P)
UNION FENOSA
Responsible: Mr Jesús María GONZALEZ GARCÍA
Organisation: UNION FENOSA
Direct line: +(34) 987/570690
Direct fax: +(34) 987/571400
UNION FENOSA
e-mail: jmgonzalezga@unionfenosa.es
Address: Central Térmica
ES-24640 LA ROBLA
61
(P)
IEN
Organisation: IEN
Direct line: +(48) 22/34 51 418
Direct fax: +(48) 22/642 83 78
PL-02 981 WARSAW
(P)
INDRA
Responsible: MSc. Ana Isabel GALVEZ
Organisation: INDRA
Direct line: +(34) 91/257 94 08
Direct fax: +(34) 91/210 20 10
INDRA SISTEMAS SA
e-mail: aigalvez@indra.es
Address: Avenida Bruselas 35
ES-28108 ALCOBENDAS
(P)
UNIZAR
Responsible: Prof. Javier BALLESTER CASTANER
Organisation: UNIV ZARAGOZA
Direct line: +(34) 976/762 153
Direct fax: +(34) 976/ 761 882
UNIVERSIDAD DE ZARAGOZA
e-mail: ballester@unizar.es
Department: Fluid Mechanics Group
Address: c/ Maria de Luna 3
ES-50015 ZARAGOZA
62
Technical Group TGS1 :"Ore agglomeration and Ironmaking"
Contract N°
RFSR-CT-2005-00001
Reference N°
TGS1.1/05
2.402.677 1.441.605
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Short term CO² mitigation for steelmaking
Acronym SHOCOM
:
This proposal aims at lowering the environmental impact of steelmaking, by reducing greenhouse gas emission, and saving energy and natural resources.
The expected reduction at short term is around 10% waiting for higher reduction coming from ULCOS results.
The means are:
the use of charcoal, a renewable source of carbon, in large blast furnaces, either by addition in the coal blend, or by injection through the tuyeres
the enhancement of coke reactivity, to decrease the reserve zone temperature and the carbon need of the blast furnace
the intensive use of wastes as reductant for the BF, through gasification and injection of the produced gas
the addition of waste plastics into the coal blend.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Dr. François HANROT
Organisation: ARCELOR
Direct line: +(33) 3/87 70 43 56
Direct fax: +(33) 3/87 70 41 03
ARCELORMITTAL MAIZIERES RESEARCH S.A.
e-mail: francois.hanrot@arcelormittal.com
Address: Voie Romaine
FR-57283 MAIZIERES-LES-METZ
(P)
RWTH
Responsible: Prof.Dr.-Ing. Dieter G. SENK
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
INSTITUT FÜR EISENHÜTTENKUNDE
e-mail: dieter.senk@iehk.rwth-aachen.de
Department: Chair of Metallurgy of Iron & Steel
Address: Intzestrasse 1
DE-52072 AACHEN
(P)
VDEH-BFI
Responsible: Dr rer nat Günter HARP
Organisation: VDEH
Direct line: +(49) 211/670 72 86
Direct fax: +(49) 211/670 72 05
STAHLINSTITUT VDEh
e-mail: guenter.harp@bfi.de
(P)
CSIC
Responsible: Dr. Ing. Miguel FERNANDEZ
Organisation: CENIM - CSIC
Direct line: +(34) 91/553 89 00
Ext.: 317
Direct fax: +(34) 91/534 74 25
CENTRO NACIONAL DE INVESTIGACIONES
METALURGICAS
Address: Avenida Gregorio del Amo 8
e-mail: mfl@cenim.csic.es
ES-28040 MADRID
(P)
VOEST-ALPINE
Responsible: Dipl.-Ing. Thomas BÜRGLER
Direct line: +(43) 732/6585 5106
Direct fax: +(43) 732/6980 5106
VOESTALPINE STAHL GMBH
e-mail: thomas.buergler@voestalpine.com
Department: Ironmaking - Research and Development
Address: VOEST-ALPINE-Strasse 3
AT-4020 LINZ
63
Contract N°
RFSR-CT-2005-00002
Reference N°
TGS1.2/05
1.991.409 1.194.846
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Determination of factors influencing dead man position and evaluation of its impact on blast furnace life time
Acronym DEMPOLIFE
:
Relining a blast furnace is a costly affair, due to the actual relining cost and production loss.
The campaign life is currently limited by the hearth refractory wear. The objective of this project is to increase that refractory lifespan. Online
measurements at the blast furnace will be improved. New models describing the state of the blast furnace hearth will be developed.
The dissection of a hearth will be used to validate both models and measurements. This will improve understanding of the wear mechanisms and
subsequently lead to better process control and a longer life span of the blast furnace hearth.
State of progress:
Partners
(CO)
CORUS NL
Responsible: Ir. Jan van der STEL
Organisation: CORUS NL
Direct line: +(31) 251/49 74 85
Direct fax: +(31) 251/47 03 48
CORUS TECHNOLOGY BV - IJMUIDEN
TECHNOLOGY CENTRE
Department: Blast Furnace Devlpt and Alternative Ironmaking
Address: Postbus 10000
e-mail: jan.van-der-stel@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
CORUS NL
Responsible: Mr Mark HATTING
Direct line: +(31) 2514/96780
Direct fax: +(31) 2514 70348
TECHNOLOGY CENTRE
Department: Building 3G.16/6.666
e-mail: mark.hattink@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
ARCELOR RESEARCH
Responsible: Dr Sami-Alex ZAÏMI
Direct line: +(33) 3/87 70 43 46
Direct fax: +(33) 3/87 70 41 03
e-mail: sami-alex.zaimi@arcelormittal.com
Department: Industrial Operations Research Center
(P)
TKS
Responsible: Dr.-Ing. H. Peter RÜTHER
Organisation: TKS
Direct line: +(49) 203/52 49 304
Direct fax: +(49) 203/52 49 207
THYSSEN KRUPP STEEL AG
e-mail: peter.ruether@thyssenkrupp.com
Address: Kaiser-Wilhelmstrasse 100
DE-47166 DUISBURG
(P)
VDEH-BFI
Responsible: Dr. Oliver MIELENZ
Direct line: +(49) 211/6707 565
Direct fax: +(49) 211/6707 205
e-mail: oliver.mielenz@bfi.de
Department: R&D
64
(P)
CRM
Responsible: Mr Olivier HAVELANGE
Direct line: +(32) 4/254 64 71
Organisation: CRM
Direct fax: +(32) 4/254 64 90
CENTRE DE RECHERCHES METALLURGIQUES
ASBL
Address: Avenue du Bois St-Jean 21
e-mail: havelange@rdmetal.ulg.ac.be
Domaine Universitaire du Sart Tilman
(P59)
BE-4000 LIEGE
(P)
MEFOS
Responsible: Dr Dong Yuan SHENG
Direct line: +(46) 920/20 19 34
Organisation: MEFOS
Direct fax: +(46) 920/25 58 32
MEFOS, METALLURGICAL RESEARCH
INSTITUTE AB
Address: Aronstorpsvägen 1
e-mail: sheng@mefos.se
SE-97125 LULEÅ
Contract N°
RFSP-CT-2006-00001
Reference N°
TGS1.01/06
4.511.967 1.359.570
Duration
Dates:
45 (Mths)
Starting
Ending
Actual
1/03/2006 28/02/2009 31/12/2009
Title: Industrial demonstration of hot gas injection at the blast furnace
Acronym IDEOGAS
:
This proposal is part of the ULCOS Program and is focused on carbon saving at the blast furnace with an objective of 25%. It aims at testing at a real blast
furnace (EKO Stahl BF1) nitrogen-free operation and hot reducing gas injection into the shaft.
The objectives are:
- optimise the gas flow rate injected at the wall and its distribution inside the shaft
- assess the furnace behaviour under these conditions (thermal control, raceway formation, cohesive zone, pressure field, hearth, coke quality damages)
- assess the productivity increase of nitrogen-free operation
- demonstrate high rates of natural gas at the blast furnace.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mr Dominique SERT
Direct line: +(33) 3/87 70 43 66
Direct fax: +(33) 3/87 70 41 03
e-mail: dominique.sert@arcelormittal.com
(P)
ARCELOR EHS
Responsible: Dr -Ing Jörg HUNGER
Organisation: ARCELOR EHS
Direct line: +(49) 3364/37 5841
Direct fax: +(49) 3364/37 5840
ARCELORMITTAL EISENHÜTTENSTADT GmbH
e-mail: joerg.hunger@arcelormittal.com
Department: Blast furnace plant
Address: Werkstrasse 1
DE-15890 EISENHÜTTENSTADT
(P)
CORUS NL
Responsible: Ir. Jan van der STEL
Direct line: +(31) 251/49 74 85
Direct fax: +(31) 251/47 03 48
TECHNOLOGY CENTRE
Department: Blast Furnace Devlpt and Alternative Ironmaking
e-mail: jan.van-der-stel@corusgroup.com
NL-1970 CA IJMUIDEN
65
(P)
CRM
Responsible: Mr Gérard DANLOY
Organisation: CRM
Direct line: +(32) 4/254 64 84
Direct fax: +(32) 4/254 64 90
ASBL
e-mail: danloy@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
AGDH
Responsible: Dr -Ing Rongshan LIN
Organisation: AGDH
Direct line: +(49) 6831/47-3401
Direct fax: +(49) 6831/47-3676
AKTIEN-GESELLSCHAFT DER DILLINGER
HÜTTENWERKE
Department: Abt. F+E/RE
Address: Werkstraße, 1
e-mail: rongshan.lin@dillinger.biz
DE-66763 DILLINGEN/SAAR
(P)
LKAB
Responsible: Mr Peter SIKSTROM
Organisation: LKAB
Direct line: +(46) 920/380 80
Direct fax: +(46) 920/25 57 13
LUOSSAVAARA-KIIRUNAVAARA AB (LKAB)
e-mail: peter.sikstrom@lkab.com
Address: PO Box 952
SE-971 28 LULEA
(P)
ILVA
Responsible: Dr. -Ing. Vincenzo DIMASTROMATTEO
Organisation: ILVA
Direct line: +(39) 335/7684 871
Direct fax: +(39) 099/481 37 25
ILVA S.P.A.
e-mail: vincenzo.dimastromatteo@rivagroup.com
Department: Blast Furnace
Address: Via Appia km 648
IT-74100 TARANTO
(P)
TKS
Responsible: Dr. Bernd KORTHAS
Organisation: TKS
Direct line: +(49) 203/52-49308
Direct fax: +(49) 203/52-49207
e-mail: bernd.korthas@thyssenkrupp.com
DE-47166 DUISBURG
(P)
VOEST-ALPINE
Responsible: Dipl.-Ing. Thomas BÜRGLER
Direct line: +(43) 732/6585 5106
Direct fax: +(43) 732/6980 5106
e-mail: thomas.buergler@voestalpine.com
Department: Ironmaking - Research and Development
AT-4020 LINZ
(P)
RUUKKI
Responsible: Dr Lawrence HOOEY
Direct line: +(358) 20/59 223 08
Direct fax: +(358) 20/59 231 05
RAUTARUUKKI OYJ
e-mail: lawrence.hooey@ruukki.com
Department: process Development
FI-92101 RAAHE
66
Contract N°
RFSR-CT-2006-00039
Reference N°
TGS1.02/06
1.751.893 1.051.136
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Enhanced sinter efficiency by optimised quality control
Acronym Sinter efficiency
:
The overall aim of this research project is to enhance the sinter efficiency by optimisation of the sinter mix homogeneity and permeability based on
chemical inline-monitoring and on-strand permeability test devices. One of the two main objectives of the project is the development of an inlinemonitoring test device which is able to detect the chemical composition of a sinter raw mix on a conveyor belt in situ. Two different measurement
techniques, XRF and PGNAA are investigated in this project The other main objective deals with the development und installation of on-strand
permeability measurements. Therefore the pre and post ignition permeability is investigated and compared with each other.
Both objectives have in common that the monitoring devices are used to control the sinter process to enhance the sinter quality and productivity.
State of progress:
Partners
(CO)
TKS
Responsible: Dr. Stefan WIENSTRÖER
Organisation: TKS
Direct line: +(49) 203/52 44589
Direct fax: +(49) 203/52 28690
THYSSENKRUPP STEEL AG
e-mail: stefan.wienstroeer@thyssenkrupp.com
Department: 166 DB RE-FQ/KS
Address: Kaiser-Wilhelm-Straße 100
DE-47161 DUISBURG
(P)
VASD
Responsible: Dipl.-Ing Manfred ZAHN
Direct line: +(43) 50 304/25-2489
Direct fax: +(43) 50 304/25-4206
VOEST-ALPINE STAHL DONAWITZ
e-mail: manfred.zahn@voestalpine.com
Department: R&D
Address: Kerpelystrasse 199
AT-8700 LEOBEN-DONAWITZ
(P)
VDEH-BFI
Responsible: Dr.-Ing. Thorsten HAUCK
Direct line: +(49) 211/6707-301
Direct fax: +(49) 211/6707-205
e-mail: thorsten.hauck@bfi.de
Department: R&D
(P)
CORUS NL
Responsible: Mr Ronald SCHIMMEL
Direct line: +(31) 251/496 032
Direct fax: +(31) 251/470 348
TECHNOLOGY CENTRE
Department: Ferrous Materials Group
e-mail: ronald.schimmel@corusgroup.com
NL-1970 CA IJMUIDEN
67
Contract N°
RFSR-CT-2007-00001
Reference N°
TGS1.01/07
3.558.656 2.135.194
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Improvement of hearth drainage efficiency and refractory life for high BF productivity and a well adjusted reductant
injection rate at varying coke quality
Acronym Hearth efficiency
:
Blast furnace stability and productivity will be improved under the aspects of high reductant injection rates and varying coke qualities. BF lifetime, security
and environmental aspects will be raised additionally. To optimise the tapping strategy and to lower the fuel rate, the hearth drainage efficiency will be
investigated with a new deadman porosity parameter, innovative non radioactive tracer tests, new radar and ultrasound measurements, novel analysis
techniques and upgraded simulations of fluid flows in the hearth. Investigations of thermal stresses in refractory and dissection analyses of revamped
hearths will improve lining design for campaign prolongation. The estimated annual savings are up to 0.7 M €/year for each BF in the EU.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Gerhard WESSLER
Direct line: +(49) 211/6707-282
Direct fax: +(49) 211/6707-205
e-mail: gerhard.wessler@bfi.de
Department: R&D
(P)
AGDH
Responsible: Dr -Ing Rongshan LIN
Organisation: AGDH
Direct line: +(49) 6831/47-3401
Direct fax: +(49) 6831/47-3676
HÜTTENWERKE
Department: Abt. F+E/RE
e-mail: rongshan.lin@dillinger.biz
(P)
ARCELOR EHS
Responsible: Dr -Ing Jörg HUNGER
Direct line: +(49) 3364/37 5841
Direct fax: +(49) 3364/37 5840
e-mail: joerg.hunger@arcelormittal.com
Department: Blast furnace plant
(P)
RUUKKI
Responsible: Dr Lawrence HOOEY
Direct line: +(358) 20/59 223 08
Direct fax: +(358) 20/59 231 05
RAUTARUUKKI OYJ
e-mail: lawrence.hooey@ruukki.com
Department: process Development
FI-92101 RAAHE
(P)
ABO AKADEMI
Responsible: Prof. Henrik SAXEN
Organisation: ABO AKADEMI
Direct line: +(358) 40/544 3301
Direct fax: +(358) 2/215 4792
ABO AKADEMI UNIVERSITY
e-mail: henrik.saxen@abo.fi
Department: Head of Laboratory
Address: Domkyrkotorget 3
FI-20500 ABO
68
(P)
UNIV OULU
Responsible: Prof. Dr Jouko HÄRKKI
Organisation: UNIV OULU
Direct line: +(358) 8/553 24 24
Direct fax: +(358) 8/553 23 39
UNIVERSITY OF OULU
e-mail: jouko.harkki@oulu.fi
Department: Department of Process Engineering
Address: Linnanmaa
FI-90014 OULU
(P)
ARCELOR RESEARCH
Responsible: Dr Sami-Alex ZAÏMI
Direct line: +(33) 3/87 70 43 46
Direct fax: +(33) 3/87 70 41 03
e-mail: sami-alex.zaimi@arcelormittal.com
(P)
ARCELOR ESPANA
Responsible: Mr Luis Fernando SANCHO MENDEZ
Organisation: ACERALIA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
ARCELORMITTAL ESPANA SA
e-mail: luis-fernando.sancho@arcelormittal.com
Department: Innovación e Investigación Iron and steel making
Address: Apartado 90
ES-33480 AVILES (ASTURIAS)
(P)
CSIC
Responsible: Dr Javier MOCHON MUÑOZ
Direct line: +(34) 91/553 89 00
Direct fax: +(34) 91/534 74 25
METALURGICAS
Department: Dipromess Group Primary & Metallurgical Dpt
e-mail: jmochon@cenim.csic.es
ES-28040 MADRID
(P)
MEFOS
Responsible: Dr Dong Yuan SHENG
Organisation: MEFOS
Direct line: +(46) 920/20 19 34
Direct fax: +(46) 920/25 58 32
INSTITUTE AB
e-mail: sheng@mefos.se
SE-97125 LULEÅ
(P)
LUCCHINI
Responsible: Ing Antonio GRANATA
Organisation: LUCCHINI
Direct line: +(39) 565/648 18
Direct fax: +(39) 565/642 94
LUCCHINI SIDERURGICA
e-mail: a.granata@lucchini.com
Address: Viale della Resistenza, 2
IT-57025 PIOMBINO
(P)
CSM
Responsible: Dr Eros Luciano FARACI
Organisation: CSM
Direct line: +(39) 06/505 53 36
Direct fax: +(39) 06/505 54 61
e-mail: e.faraci@c-s-m.it
IT-00128 ROMA EUR
69
Ext.: 386
Contract N°
RFSR-CT-2007-00002
Reference N°
TGS1.02/07
2.685.901 1.611.540
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Consistent blast furnace operation whilst using low cost raw materials
Acronym Consistent BF
:
The proposed reserach will deliver solutions, how to conserve consistent blast furnace operation also in situations, when low cost raw materials, usually of
lower quality, shall be used. Operational trials will explore ferrous fines and nut coke charging, correlated with coal injection rates. New online
inspectionmethods will demonstrate changed material properties between charging and raceway. Scientific knowledge will proceed. Competitiveness for
ironmaking will be increased. The research will contribute to the RFCS programme within the R&D area "Application of developed know-how and
optimisation of the operating conditions in conventional routes" of the Strategic Research Agenda of ESTEP.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Stefan BÖHNISCH
Direct line: +(49) 211/670 76 17
Direct fax: +(49) 211/670 72 05
e-mail: stefan.boehnisch@bfi.de
Department: R&D
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
(P)
CSIC
Responsible: Dr Javier MOCHON MUÑOZ
Direct line: +(34) 91/553 89 00
Ext.: 386
Direct fax: +(34) 91/534 74 25
METALURGICAS
Department: Dipromess Group Primary & Metallurgical Dpt
e-mail: jmochon@cenim.csic.es
ES-28040 MADRID
(P)
CORUS UK
Responsible: Dr George CLIXBY
Direct line: +(44) 1642/77 00 37
Direct fax: +(44) 1642/46 03 21
TECHNOLOGY CENTRE
e-mail: george.clixby@corusgroup.com
(P)
SZFG
Responsible: Dr Manfred KETTLER
Organisation: SZFG
Direct line: +(49) 5341/21-3033
Direct fax: +(49) 5341/21-3507
SALZGITTER FLACHSTAHL GmbH
e-mail: kettlerm@salzgitter-ag.com
Address: Eisenhüttenstrasse 99
DE-38239 SALZGITTER
70
(P)
SSSA
Responsible: Dr Valentina COLLA
Direct line: +(39) 050/883 079
Organisation: SSSA
Direct fax: +(39) 050/883 333
SCUOLA SUPERIORE DI STUDI UNIVERSITARI
SANT'ANNA
Address: Viale Rinaldo Piaggio 34
e-mail: colla@sssup.it
IT-56025 PONTEDERA (PISA)
(P)
TKS
Responsible: Dr Carl Ulrich WIETERS
Direct line: +(49) 203/522 58 71
Organisation: TKS
Direct fax: +(49) 203/522 41 23
e-mail: carl-ulrich.wieters@thyssenkrupp.com
Department: 360 FQP-PT-PL
DE-47166 DUISBURG
Contract N°
RFSR-CT-2007-00003
Reference N°
TGS1.03/07
1.548.822
929.293
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Alternate carbon sources for sintering of iron ore
Acronym ACASOS
:
New alternate carbon sources for sintering (Acasos) will be investigated with the aim to substitute coke breeze. Therefore Acasos, i.e. biomass, deposited
carbon rich dust, BF-dust and alternate sources as petroleum coke and anthracite will be indentified, characterised and economically evaluated for replacing
coke breeze.
On this basis innovative pre-treatment process, i.e. grinding, separation and agglomeration processes, will be investigated to adapt and optimise the
properties of Acasos. Influences on sinter performance and quality will be determined at sinter-pot tests. Based on this Acasos will be applied in industrial
scale to determine replacement factors and influences on the sintering process and emissions.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Roland PIETRUCK
Direct line: +(49) 211/6707 891
Direct fax: +(49) 211/6707 205
e-mail: roland.pietruck@bfi.de
(P)
ARCELOR BREMEN
Responsible: Dr Joachim JANZ
Organisation: ARCELOR BREMEN
Direct line: +(49) 421/648 20 01
Direct fax: +(49) 421/648 32 80
ARCELOR BREMEN GMBH
e-mail: joachim.janz@arcelor-bremen.com
Address: Auf den Delben 35
DE-28237 BREMEN
(P)
CORUS UK
Responsible: Mr Trevor FRAY
Direct line: +(44) 1709/825 275
Organisation: BRITISH STEEL
Fax: +(44) 1709/82 53 37
BRITISH STEEL, SWINDEN TECHNOLOGY
CENTRE
Address: Moorgate
e-mail: trevor.fray@corusgroup.com
GB- ROTHERHAM S60 3AR
71
(P)
ILVA
Responsible: Dr Aldo BOVE
Direct line: +(39) 010/607 67 04
Organisation: ILVA
Direct fax: +(39) 010/607 67 66
ILVA
e-mail: aldo.bove@rivagroup.com
Department: Ironmaking - Raw Material Lab Responsible
Address: Via Corsica 4
IT-16128 GENOVA
(P)
VOEST-ALPINE
Responsible: Dipl -Ing Dr Herbert SCHMID
Direct line: +(43) 732/65 85 77 059
Direct fax: +(43) 70/6980 77 059
e-mail: herbert.schmid@voestalpine.com
AT-4020 LINZ
Contract N°
RFSR-CT-2008-00001
Reference N°
TGS1.01/08
1.875.402 1.125.242
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Flexible injection of alternative carbon material into the blast furnace
Acronym FLEXINJECT
:
The project contributes to a sustainable use of natural resources by increased use of alternative carbon sources as BF injectants, improved competitiveness
of the European steel producers and a possibility to decrease CO2 emission. Materials (e.g. plastics, dusts, sludge) are treated in an air-grinder to improve
their
suitability for BF injection and the effect on product properties is evaluated. By tests and theoretical support, two injection layouts for BF application are
compared and the limits of additions to a PC system are evaluated. Additional raceway measurement technique during experimental BF tests is used to
improve verification of raceway simulation.
State of progress:
Partners
(CO)
MEFOS
Responsible: Dr. Lena SUNDQVIST ÖKVIST
Organisation: MEFOS
Direct line: +(46) 70/396 63 63
Direct fax: +(46) 920/25 58 32
MEFOS- METALLURGICAL RESEARCH
INSTITUTE AB
Address: P.O. Box 812
e-mail: lena.sundqvist@mefos.se
SE-97125 LULEÅ
(P)
SSAB
Responsible: M.Sc. Bo SUNDELIN
Organisation: SSAB
Direct line: +(46) 155/255 652
Direct fax: +(46) 155/254 275
SSAB OXELÖSUND AB
e-mail: bo.sundelin@ssabox.com
Address: Sodermanlands
SE-61380 OXELÖSUND
(P)
VDEH-BFI
Responsible: Dipl.-Ing. Michael HENSMANN
Direct line: +(49) 211/6707 206
Direct fax: +(49) 211/6707 205
e-mail: michael.hensmann@bfi.de
Department: R&D
72
(P)
VOEST-ALPINE
Responsible: Dr. Stefan SCHUSTER
Direct line: +(43) 50304/159 544
Direct fax: +(43) 50304/559 544
e-mail: stefan.schuster@voestalpine.com
AT-4020 LINZ
(P)
LKAB
Responsible: Mr Nicklas EKLUND
Organisation: LKAB
Direct line: +(46) 920/380 85
Direct fax: +(46) 920/255 713
LUOSSAVAARA-KIIRUNAVAARA AB (LKAB)
e-mail: nicklas.eklund@lkab.com
Address: PO Box 952
SE-971 28 LULEA
Technical Group TGS1 has 8 Projects and 55 Partners
73
Technical Group TGS2 :"Steelmaking processes"
Contract N°
RFSR-CT-2005-00003
Reference N°
TGS2.1/05
1.854.704 1.112.822
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Control and optimisation of scrap charging strategies and melting operations to increase steel recycling ratio
Acronym CONOPT SCRAP
:
The general aim of the project is to allow the best and most economic use of scrap in steelmaking operations.
At the EAF, systems for the on-line monitoring of the scrap charge and for the optimisation of its melting conditions will be developed and implemented in
industrial plants. Both aspects are indeed highly significant with regard to
furnace efficiency, iron recovery and energy use.
Another main axis of work will be to increase the use of lower scrap qualities (including “problem” scrap such as more contaminated scrap qualities with
plastics, rubber and other materials), both for the EAF and BOF in order to
comply with future legislation regarding steel recycling ratios, such as the “end of life vehicle” directive Directive' as well as existing directives on
packaging and coated scrap.
State of progress:
Partners
(CO)
CRM
Responsible: Mr Michel WAUTERS
Organisation: CRM
Direct line: +(32) 4/254 62 11
Direct fax: +(32) 4/254 64 64
ASBL
e-mail: wauters@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
ARCELOR PROFIL
Responsible: Mr Marco PICCO
Organisation: PROFILARBED
Direct line: +(352) 5313/21 54
Direct fax: +(352) 54/79 64
ProfilARBED S.A.
e-mail: marco.picco@arcelormittal.com
Address: 66, Route de Luxembourg
LU-4009 ESCH-SUR-ALZETTE
(P)
CORUS UK
Responsible: Mr Alan SCHOLES
Direct line: +(44) 1642/770 027
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
Department: Aluminium & Steel Casting
e-mail: alan.scholes@corusgroup.com
(P)
CSM
Responsible: Dr. Piero FRITTELLA
Telephone: +(39) 06/505 52 68
Organisation: CSM
Fax: +(39) 06/505 53 00
e-mail: p.frittella@c-s-m.it
IT-00128
(P)
DUFERCO
Responsible: Dr. Ing. Bernard POIZOT
Organisation: DUFERCO
Direct line: +(32) 64/272 855
Direct fax: +(32) 64/272 849
DUFERCO LA LOUVIERE SA
e-mail: b.poizot@duferco.be
Department: Steelmaking
Address: Rue des Rivaux, 2
BE-7100 LA LOUVIERE
74
Ext.: 2050
(P)
MEFOS
Responsible: Dr. Jonas ALEXIS
Direct line: +(46) 920/20 19 32
Organisation: MEFOS
Direct fax: +(46) 920/25 58 32
INSTITUTE AB
Department: Process Metallurgy Department
e-mail: jonas.alexis@mefos.se
SE-97125 LULEÅ
Contract N°
RFSR-CT-2005-00004
Reference N°
TGS2.2/05
1.076.922
646.153
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Mastering of P-ESR technology for high nitrogen steel grades for high value applications
Acronym HINIST
:
Electro Slag Remelting is the technology for obtaining high purity and soundness steels in large ingots. It is also promising for designing and producing
high nitrogen high performance steels when the process is run at high pressure.
The aim of the project is to develop new and improved methods for production of both martensitic and austenitic special steels with high nitrogen content
(up to 1%) for highly stressed and high temperature applications.
The project, carried out both at laboratory and industrial scale, will benefit of specifically developed simulative and process control tools, and will generate
a set of microstructural, chemical, and mechanical characterisations of steels containing high content of Nitrogen.
Specific industrial testing will be carried out too concerning thermomechanical transformation of ingots to verify the whole manufacturing cycle conditions.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Ing. Andrea CAROSI
Organisation: CSM
Direct line: +(39) 06/505 52 85
Direct fax: +(39) 06/505 54 88
e-mail: a.carosi@c-s-m.it
IT-00128
(P)
VDEH-BFI
Responsible: Dr -Ing Bernd KLEIMT
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
e-mail: bernd.kleimt@bfi.de
Department: R&D
(P)
ETE
Responsible: Dipl.-Ing. Volkher DIEHL
Organisation: ETE
Direct line: +(49) 201/188 3128
Direct fax: +(49) 201/188 2787
ENERGIETECHNIK ESSEN GmbH
e-mail: v.diehl@energietechnik-essen.de
Address: Westendstrasse 15
DE-45143 ESSEN
(P)
VITKOVICE
Responsible: Prof. Dr. Vlastimil VODAREK
Organisation: VITKOVICE
Direct line: +(420) 59/595 69 83
Direct fax: +(420) 69/292 89 27
VITKOVICE Výzkum a Vývoj, spol. s.r.o.
e-mail: vlastimil.vodarek@vitkovice-vyzkum.cz
Department: Materials Engineering
Address: Pohranicni 693/31
CZ-706 02 OSTRAVA
75
Contract N°
RFSR-CT-2005-00005
Reference N°
TGS2.3/05
906.380
543.828
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2009
Title: Improvement of purging plugs performances by investigations on the materials, process analysis and continuous
monitoring
Acronym ImPurgingAr
:
The object of the research proposal is the purging plugs for ladle Ar blowing.
The objective is to improve the plugs selection and management in order to enhance their performances.
The work programme is based on a multidisciplinary approach that involves steel maker, purging plugs producer and researcher working on refractory
materials and technology and on measuring methodologies and system applied to the steel making environment.
The activity forecast both on plant and laboratory trials.
Trials on plant want to characterise standard and enhanced ladle practices, standard and new purging plugs, with respect the plugs performances. During
these trials plug refractory wear measurements are carried out.
Laboratory trials forecast refractory investigations to characterise materials transformations during the use of the plugs and to better establish the
correlations between process and wear of the refractory.
Overall results will be used to set a model of general application of the correlations between the process and the behaviour of the plugs.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Mario TONELLI
Organisation: CSM
Direct line: +(39) 0744/48 72 07/204
Direct fax: +(39) 0744/47 09 27
CSM - SEDE DI TERNI
e-mail: m.tonelli@c-s-m.it
Address: Viale B. Brin 218
IT-05100 TERNI
(P)
VDEH-BFI
Responsible: Dipl. -Ing. Christian DANNERT
Direct line: +(49) 211/6707 899
Direct fax: +(49) 211/6707 205
e-mail: christian.dannert@bfi.de
Department: R&D
(P)
CALDERYS
Responsible: Dr. Renzo PARODI
Direct line: +(39) 010/64 50 706
Organisation: PLIBRICO ITALIA
Fax: +(39)
PLIBRICO ITALIA SRL
e-mail: renzo.parodi@plibrico.it
Address: Via de Marini 1
IT-16149 GENOVA
(P)
TKAST
Responsible: Ing. Vinicio DE ANGELIS
Organisation: TKAST
Direct line: +(39) 0744/49 05 78
Direct fax: +(39) 0744/49 06 55
THYSSENKRUPP ACCIAI SPECIALI TERNI SpA
e-mail: v.deangelis@acciaiterni.it
Address: Viale B. Brin, 218
IT-05100 TERNI
76
Contract N°
RFSR-CT-2005-00006
Reference N°
TGS2.4/05
1.570.504
942.302
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Prediction of inclusions in the slabs from the process characteristics
Acronym PREDINC
:
Non metallic inclusions are present in all continuously casted steels.
They can affect the physical and mechanical characteristics of products and, consequently, their service properties.
The development of a model capable to predict the type, number and severity of the non metallic endogenous inclusions during production will be essential
to introduce corrective actions immediately, with the consequent saving and optimization of the resource consumption and environmental benefit.
This project will use innovative techniques based on the objective experience extracted from past data for obtain this objective.
State of progress:
Partners
(CO)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
(P)
SSSA
Organisation: SSSA
Direct line: +(39) 050/883 079
Direct fax: +(39) 050/883 333
SANT'ANNA
(P)
ILVA
Responsible: Dr. Nicola DELRE
Organisation: ILVA
Direct line: +(39) 099/481 29 93
Direct fax: +(39) 099/481 39 06
ILVA S.P.A.
e-mail: tecniciacciaierie.taranto@rivagroup.com
Address: Via Appia km 648
IT-74100 TARANTO
(P)
HUT
Responsible: M. Sc. Jukka LAINE
Organisation: HUT
Direct line: +(358) 9/451 2760
Direct fax: +(358) 9/451 2798
HELSINKI UNIVERSITY OF TECHNOLOGY TEKNILLINEN KORKEAKOULU
Address: Otakaari 1
e-mail: jukka.laine@tkk.fi
FI-02015 ESPOO
(P)
POLIMI
Responsible: Prof. Walter NICODEMI
Organisation: POLIMI
Direct line: +(39) 02/2399 8283
Direct fax: +(39) 02/2399 8202
POLITECNICO DI MILANO - DIPARTIMENTO DI
MECCANICA
Department: Material Section
Address: Via La masa 34
e-mail: walter.nicodemi@polimi.it
IT-20156 MILANO
77
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
DE-52072 AACHEN
(P)
UNIV OVIEDO
Responsible: Prof. Francisco ORTEGA FERNANDEZ
Organisation: UNIOVI
Direct line: +(34) 98/510 42 72
Direct fax: +(34) 98/510 42 56
UNIVERSIDAD DE OVIEDO
e-mail: fran@api.uniovi.es
Address: c/ Independencia, 13
ES-33004 OVIEDO
Contract N°
RFSR-CT-2005-00007
Reference N°
TGS2.5/05
1.228.207
736.924
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: On-line determination of the CO/CO2 concentration in the OG system in BOF converter
Acronym ANALCO
:
A great problem when using gas analysis data based in off-line gas analyzers for controlling the gas extraction system is the long time delays associated
with the measurements.
The objective of this project is a development of dynamic models of the gas extraction system to optimise existing control systems and investigate
alternative systems for an on-line measurement of the concentration of COx and O2.
With this control it could act over the OG system: deciding to send the gas to the torch or gasometer, depending on the proportion of CO, CO2 and O2, and
the development of blow control schemes based on gas analysis.
State of progress:
Partners
(CO)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
(P)
MEFOS
Responsible: Mr Johan ERIKSSON
Organisation: MEFOS
Direct line: +(46) 920/20 19 23
Direct fax: +(46) 920/25 58 32
INSTITUTE AB
e-mail: johan.eriksson@mefos.se
SE-97125 LULEÅ
(P)
SSSA
Organisation: SSSA
Direct line: +(39) 050/883 079
Direct fax: +(39) 050/883 333
SANT'ANNA
78
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
DE-52072 AACHEN
Contract N°
RFS1-CT-2006-00002
Reference N°
TGS2.01/06
375.400
20.000
Starting
Ending
Actual
Duration
Dates:
0 (Mths)
26/06/2006 28/06/2006 28/06/2006
Title: 5th European oxygen steelmaking conference 2006
Acronym EOSC 2006
:
The objective of the present proposal is the organisation and hosting of an European conference in the field of oxygen steelmaking and secondary
metallurgy.
The European Oxygen Steelmaking Conference (EOSC) series is organised in turn by one of the European Metallurgical Societies and Associations. As
such it represents the most comprehensive expert knowledge in steelmaking.
Past of the EOSC venues were:
• 1993: Neuss, D
• 1997: Taranto, I
• 2000: Birmingham, UK
• 2003: Graz, A
The Steel Institute VDEh is pleased to announce that it will organize the 5th European Oxygen Steelmaking Conference to be held in Aachen, 26 – 28 June
2006.
The scope of the conference is to provide a forum for researchers, specialists and engineers from the European Union and abroad to discuss and to inform
themselves about latest process and plant technology developmens, research projects and results, operation related questions of metallurgy, automation and
process control and process integrated environmental protection aspects in all
areas of basic oxygen steelmaking. Within this frame the diffusion of results gained on research projects by the European Commission Steel RTD
Programme is assured.
State of progress:
Research completed; no publication
Partners
(MC)
VDEH
Responsible: Dr.-Ing. Hans Bodo LÜNGEN
Organisation: VDEH
Direct line: +(49) 211/670 74 44
Direct fax: +(49) 211/670 74 40
STAHLINSTITUT VDEh
e-mail: hans-bodo.luengen@vdeh.de
Department: Metallurgy
Contract N°
RFSR-CT-2006-00003
Reference N°
TGS2.02/06
1.539.162
923.498
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Strengthened scrap impact area in BOF converters
Acronym SSIA
:
Excessive wear of the scrap impact area in BOF vessels has become a major problem for European steelmaker as a consequence of enhancing product
quality and higher productivity.
The objective of this project is to develop and assess a variety of innovative care techniques and innovative techniques for use of higher wear resistant
refractory for the scrap impact area and for different types of BOF vessels.
With these techniques it will be possible to continue high scrap rate operations, use heavy internal scrap of known composition and maintain or increase
converter campaign life. Converter operations will also become safer.
State of progress:
Partners
79
(CO)
MEFOS
Responsible: Mr Johan ERIKSSON
Direct line: +(46) 920/20 19 23
Organisation: MEFOS
Direct fax: +(46) 920/25 58 32
INSTITUTE AB
e-mail: johan.eriksson@mefos.se
SE-97125 LULEÅ
(P)
SSAB
Responsible: Mr Hakan WAHLBERG
Direct line: +(46) 920/923 64
Organisation: SSAB
Direct fax: +(46) 920/924 03
SSAB TUNNPLÅT AB
e-mail: hakan.wahlberg@ssab.com
Address:
SE-78184 BORLÄNGE
(P)
RUUKKI
Responsible: M. Sc. Jarmo LILJA
Direct line: +(358) 20/59 221 59
Direct fax: +(358) 20/59 229 93
RAUTARUUKKI OYJ
e-mail: jarmo.lilja@ruukki.com
Department: Process Development
FI-92101 RAAHE
(P)
RHI
Responsible: Dr. Gerald BUCHEBNER
Direct line: +(43) 502/135 383
Organisation: RHI
Direct fax: +(43) 3842/245 95
RHI AG, TECHNOLOGY CENTER STANDORT
LEOBEN
Department: R&D
Address: Magnesitstrasse, 2
e-mail: gerald.buchebner@rhi-ag.com
AT-8700 LEOBEN
(P)
VOEST-ALPINE
Responsible: Dr. Herbert MIZELLI
Direct line: +(43) 732/6980 35 46
Direct fax: +(43) 732/6980 29 11
e-mail: herbert.mizelli@voestalpine.com
AT-4020 LINZ
Contract N°
RFSR-CT-2006-00004
Reference N°
TGS2.03/06
2.716.188 1.629.711
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Improved EAF process control using on-line offgas analysis
Acronym OFFGAS
:
In this project, continuous analysis of EAF off-gas is used to develop
comprehensive mass and energy monitoring of the EAF process in order to increase productivity. In particular, the following topics will be implemented in
order to enhance EAF productivity: implementation of on-line energy monitoring,
monitoring of decarburisation of the melt, decrease of heat load on the dedusting system by optimal combustion and heat transfer to the scrap in the furnace
vessel, decrease of lancing time and tap-to-tap time. Continuous chemical analysis of EAF off-gas will be realized at the primary dedusting system with
special emphasis on long-term availability.
State of progress:
Partners
80
(CO)
RWTH
Responsible: Prof.Dr.Ing. Herbert PFEIFER
Organisation: RWTH
Direct line: +(49) 241/80 25 935
Direct fax: +(49) 241/80 22 289
HOCHSCHULE AACHEN
Address: Kopernikusstrasse 16
e-mail: pfeifer@iob.rwth-aachen.de
DE-52056 AACHEN
(P)
DEW
Responsible: Dipl. -Ing. Hans-Peter JUNG
Organisation: DEW
Direct line: +(49) 271/808 26 57
Direct fax: +(49) 271/808 23 23
DEUTSCHE EDELSTAHLWERKE GMBH
e-mail: hans-peter.jung@dew-stahl.de
Address: Obere Kaiserstrasse
DE-57078 SIEGEN
(P)
TKS-NR
Responsible: Dipl. -Ing. Helge MEES
Organisation: TKN
Direct line: +(49) 234/919 48 91
Direct fax: +(49) 234/919 56 29
THYSSENKRUPP NIROSTA
e-mail: mees.helge@tks-nirosta.thyssenkrupp.com
Department: Process
Address: Alleestrasse 165
DE-44793 BOCHUM
(P)
VDEH-BFI
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
Department: R&D
(P)
MARIENHÜTTE
Responsible: Dipl.-Ing. Axel GRABMEIER
Organisation: MARIENHÜTTE
Direct line: +(43) 316/597 575
Direct fax: +(43) 316/597 524
STAHL- UND WALZWERK MARIENHÜTTE
GMBH
Address: Südbahnstrasse 11
e-mail: technik@marienhuette.at
AT-8020 GRAZ
(P)
CSM
Responsible: Dr. Egidio ZANIN
Organisation: CSM
Direct line: +(39) 06/505 58 30
Direct fax: +(39) 06/505 53 00
e-mail: e.zanin@c-s-m.it
IT-00128
(P)
ORI MARTIN
Responsible: Ing. Uggero DE MIRANDA
Organisation: ORI MARTIN
Direct line: +(39) 030/399 92 65
Direct fax: +(39) 030/200 09 24
O.R.I. MARTIN - ACCIAIERIA E FERRIERA DI
BRESCIA
Department: Engineering Dept
Address: Via Cosimo Canovetti 13
e-mail: uggero.demiranda@orimartin.it
IT-25128 BRESCIA
81
(P)
TECHINT
Responsible: Dr.-Eng. Mauro BIANCHI FERRI
Organisation: TECHINT
Direct line: +(39) 02/438 47 944
Direct fax: +(39) 02/438 47 696
TECHINTSpA
e-mail: mauro.bianchiferri@techint.it
Address: Via Monte Rosa 93
IT-20149 MILANO
(P)
CRM
Responsible: Mr Pierre NYSSEN
Direct line: +(32) 4/254 64 08
Organisation: CRM
Direct fax: +(32) 4/254 64 44
ASBL
e-mail: nyssen@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
Contract N°
RFSR-CT-2006-00005
Reference N°
TGS2.04/06
652.769
391.661
Duration
Dates:
28 (Mths)
Starting
Ending
Actual
1/09/2006 31/08/2008 31/12/2008
Title: Cost efficient metallurgy for the production of novel ultra high strength deep drawable steel grades with high Mn
contents from 10 to 25 wt.-% by using EAF steel making route
Acronym EAF-PROMS
:
The proposal addresses a current need for novel ultra high-strength deep-drawable steels with high manganese contents of up to 25 wt.-% and extremely
improved properties for light-weight construction.
The aim is the selection and development of suitable technologies and routes of metallurgy using steel production in the EAF and the related aspects of
secondary metallurgy for the production of these steels.
The proposal objectives will be achieved by a combination of some specific theoretical investigations, laboratory development and of larger-scale trials.
State of progress:
Partners
(CO)
SZMF
Responsible: Dr.-Ing. Christian REDEKER
Organisation: SZMF
Direct line: +(49) 5341/21-4754
Direct fax: +(49) 5341/21-3816
SALZGITTER MANNESMAN FORSCHUNG
GmbH
Address: Eisenhüttenstrasse 99
e-mail: c.redeker@sz.szmf.de
DE-38239 SALZGITTER
(P)
TU CLAUSTHAL
Responsible: Prof. Dr. -Ing. Karl-Heinz SPITZER
Organisation: TUC
Direct line: +(49) 5323/72 26 44
Direct fax: +(49) 5323/72 31 20
e-mail: karl.heinz.spitzer@tu-clausthal.de
Department: Process Metallurgy
Address: Robert-Koch-Strasse 42
(P)
MEFOS
Responsible: Mr Pär HAHLIN
Organisation: MEFOS
Direct line: +(46) 920/20 19 26
Direct fax: +(46) 920/25 58 32
MEFOS- METALLURGICAL RESEARCH
INSTITUTE AB
Address: P.O. Box 812
e-mail: par.hahlin@mefos.se
SE-97125 LULEÅ
82
Contract N°
RFSR-CT-2006-00006
Reference N°
TGS2.05/06
1.498.546
899.127
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Improving phosphorus refining
Acronym IMPHOS
:
Phosphorus removal is required to produce high quality BOS steel. However, current phosphorus process control strategies are based on end point steadystate models, which do not account for the intensely dynamic processes that are involved in phosphorus removal. Consequently, there are often large
variations in heat-by-heat performance indicating that existing control schemes for phosphorus are not secure and should be improved to avoid production
interrupts and reduce flux costs.
The project aims at improving current phosphorous refining strategies by introducing additional dynamic aspects into the control scheme including
enhanced slag formation practices and advanced lance control routines.
If successful, the project would be expected to result in improved conservation of resources (slag-making fluxes and lower temperature losses), and a
positive environmental impact (reduced BOS slag generation).
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. M. Stuart MILLMAN
Direct line: +(44) 1642/382 000
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: stuart.millman@corusgroup.com
(P)
CORUS NL
Responsible: Drs. Aart OVERBOSCH
Direct line: +(31) 251/49 31 39
Direct fax: +(31) 251/47 02 36
TECHNOLOGY CENTRE
e-mail: aart.overbosch@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
SSAB
Responsible: Msc. Mats BRÄMMING
Organisation: SSAB
Direct line: +(46) 920/923 15
Direct fax: +(46) 920/924 03
SSAB TUNNPLÅT AB
e-mail: mats.bramming@ssab.com
Address:
SE-971 88 LULEÅ
(P)
MEFOS
Responsible: PhD. Donald MALMBERG
Organisation: MEFOS
Direct line: +(46) 920/201 917
Direct fax: +(46) 920/255 832
INSTITUTE AB
e-mail: donald.malmberg@mefos.se
SE-97125 LULEÅ
83
Contract N°
RFSR-CT-2007-00004
Reference N°
TGS2.01/07
948.193
568.916
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: On-line control of desulphurisation and degassing through ladle bubbling under vacuum
Acronym ONDECO
:
The objective of the project is using appropriate sensors to qualify the stirring state, to develop innovative signal processing, to obtain representative
indices and use them as input in an on-line desulphurisation model, adjust the process and contribute to improvement of degassing performance (H, N
removal). Stakes: reduction in products non-quality (S, H, N), robust production process for future steels in low sulphur, increase in competitiveness and
increased productivity (decrease of treatment cost). The project will in gaining time that will be the source of energy savings. Safety risks will be decreased
for less operator’s exposure to the process.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mrs Laura ORUE
Direct line: +(33) 3/87 70 40 17
Direct fax: +(33) 3/87 70 41 00
e-mail: laura.oruecruz@arcelormittal.com
(P)
AGDH
Responsible: Dr -Ing Helmut LACHMUND
Organisation: AGDH
Direct line: +(49) 6831/47-3392
Direct fax: +(49) 6831/47-3684
HÜTTENWERKE
e-mail: helmut.lachmund@dillinger.biz
(P)
VOEST-ALPINE
Responsible: Dipl -Ing Dr Roman RÖSSLER
Direct line: +(43) 732/6585-73820
Direct fax: +(43) 732/6980-2911
e-mail: roman.roessler@voestalpine.com
AT-4020 LINZ
Contract N°
RFSR-CT-2007-00005
Reference N°
TGS2.02/07
1.026.340
615.804
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Optimisation of sampling at liquid steel state and correlative inclusions assessment of liquid steel for the improvement of
high performance steel grades production process
Acronym SOPLIQS
:
Development of high performance steel grades conducts to more and more severe cleanliness / inclusions populations requirements. Steelmakers have a
real need to control during steelmaking inclusions populations at the liquid state. It was established that inclusions present in liquid steel samples are not
often representative of inclusions actually present in the liquid - moreover solid– steel. In this way wrong cleanliness evaluations conduct to quality troubles
and customers' claims. The benefits estimated for total European steels production is 32M €/year. So, proposal's aims are to determine the most
representative liquid steel sampling parameters to optimise the correlative inclusions populations assessment.
State of progress:
Partners
84
(CO)
ASCOMETAL
Responsible: Dr -Ing Fabienne RUBY-MEYER
Organisation: ASCOMETAL CREAS
Direct line: +(33) 3/87 70 73 24
Direct fax: +(33) 3/87 70 73 56
ASCOMETAL CREAS
e-mail: f.rubymeyer@ascometal.lucchini.com
Department: Steelmaking and Inclusion Metallurgy Group
Address: Avenue de France
FR-57301 HAGONDANGE CEDEX
(P)
RIVA
Responsible: Ing Paolo ROSSI
Direct line: +(39) 02/307 00 945
Organisation: RIVA
Direct fax: +(39) 02/307 00 905
RIVA ACCIAIO SpA
e-mail: qualita.caronno@rivagroup.com
Address: CARONNO WORKS
IT-21042 CARONNO PERTUSELLA
(P)
SIDENOR I+D
Responsible: Mr Rafael PIZARRO
Direct line: +(34) 94/487 18 59
Organisation: SIDENOR I+D
Direct fax: +(34) 94/487 18 44
SIDENOR INVESTIGACION Y DESARROLLO
S.A.
Address: Barrio Ugarte s/n
e-mail: rafael_pizarro@sidenor.com
Apartado de Correos 152
ES-48970 BASAURI (VIZCAYA)
(P)
KTH
Responsible: Dr Anders TILLIANDER
Direct line: +(46) 8/790 84 90
Organisation: KTH
Direct fax: +(46) 8/207 681
KUNGLIGA TEKNISKA HÖGSKOLAN
e-mail: anderst@mse.kth.se
Address: Valhallavaegen 79
SE-10044 STOCKHOLM
Contract N°
RFSR-CT-2007-00006
Reference N°
TGS2.03/07
1.477.267
886.361
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Energy and productivity optimised EAF stainless steel making by adjusted slag foaming and chemical energy supply
Acronym EPOSS
:
Objective of the project is to increase energy efficiency and productivity during EAF stainless steel making by slag foaming and adjusted use of all
available energy sources. By means of different slag conditioning techniques and foaming additives foamy slag practise shall be established in dependence
on available injection technologies, tapping procedures and decarburisation requirements resulting from post treatment technology (AOD, VOD). Based on
slag foaming advantages, energy efficiency during EAF stainless steel production shall be increased by using the mainly exothermic chemical reactions,
higher power input by high impedance operation and adjusted utilisation of both chemical and electrical energy in dependence on melting time. The
proposed research is in complete accordance with the strategy priority “Direct and alternative input of energy in the electric arc furnace” and is specially
supported by the ESTEP Working Group 1 “Profit“.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl.-Ing. Gerald STUBBE
Organisation: BFI
Direct line: +(49) 211/6707 969
Direct fax: +(49) 211/6707 205
BETRIEBSFORSCHUNGSINSTITUT
e-mail: gerald.stubbe@bfi.de
Department: R&D
Address: Postfach 105145
85
(P)
MEFOS
Responsible: Dr Johan BJÖRKVALL
Direct line: +(46) 920/20 19 22
Organisation: MEFOS
Direct fax: +(46) 920/25 5 32
INSTITUTE AB
e-mail: johan.bjorkvall@mefos.se
SE-97125 LULEÅ
(P)
SIDENOR I+D
Responsible: Mr Santiago LANDA LAZCANO
Direct line: +(34) 94/487 18 72
Direct fax: +(34) 94/487 18 44 or 81
S.A.
e-mail: santiago_landa@sidenor.com
(P)
OUTOKUMPU STAINLES
Responsible: BSc Lasse LILJEDAHL
Direct line: +(46) 226/812 60
Organisation: OUTOKUMPU
Direct fax: +(46) 226/813 12
OUTOKUMPU STAINLESS AB - ARC
e-mail: Lasse.Liljedahl@outokumpu.com
Address: Koppardalen 65
SE-77422 AVESTA
(P)
BGH EDELSTAHL
Responsible: Dipl -Ing Michael SEDLMEIER
Organisation: BGH EDELSTAHL
Direct line: +(49) 271/701 147
Direct fax: +(49) 271/701 175
BGH EDELSTAHL SIEGEN GmbH
e-mail: michael.sedlmeier@bgh.de
Department: Steel Works
Address: Industriestrasse 9
DE-57076 SIEGEN
Contract N°
RFSR-CT-2007-00007
Reference N°
TGS2.04/07
1.386.292
831.775
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Resource-saving operation and control of stainless steel refining in VOD and AOD process
Acronym OPCONSTAINLESS
:
The objective of the project is to improve the operation and control of stainless steel refining within the VOD and the AOD process with respect to the
main metallurgical operations. This shall be achieved by detailed investigations with CFD based process models, and by application of dynamic models for
on-line observation and control of the process. Furthermore a detailed investigation of operation parameters with emphasis on the slag behaviour shall be
performed, and new VOD operation practices regarding lance injection of scale FeO and EAF slag with high chromium contents shall be developed.
Expected benefits are a reduced consumption of alloys, reducing agents, slag formers and process gases. Stainless steel production will be optimised
regarding energy consumption and amount of slag to be deposited or recycled. The well-aimed control of decarburisation reaction will reduce the risk of
potentially dangerous steel and slag overflow.
State of progress:
Partners
(CO)
VDEH-BFI
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
Department: R&D
86
(P)
KTH
Responsible: Dr Anders TILLIANDER
Direct line: +(46) 8/790 84 90
Organisation: KTH
Direct fax: +(46) 8/207 681
e-mail: anderst@mse.kth.se
SE-10044 STOCKHOLM
(P)
SMS MEVAC
Responsible: Dipl -Ing Dieter TEMBERGEN
Organisation: SMS MEVAC
Direct line: +(49) 201/6323 174
Direct fax: +(49) 201/6323 274
SMS MEVAC GmbH
e-mail: dieter.tembergen@sms-mevac.com
Address: Bamlerstraße 3A
DE-45141 ESSEN
(P)
KOBOLDE
Responsible: Dr. Eng. Rutger GYLLENRAM
Organisation: KOBOLDE
Direct line: +(46) 8/411 5770
Direct fax: +(46) 8/88 8229
KOBOLDE & PARTNERS AB
e-mail: rutger.f.gyllenram@kobolde.se
Address: Birger Jarlsgatan 41A
SE-111 73 STOCKHOLM
(P)
SZ ACRONI
Responsible: Dr. Anton JAKLIC
Direct line: +(386) 4/584 1301
Organisation: SZ ACRONI
Direct fax: +(386) 4/584 1305
ACRONI, PODJETJE ZA PROIZVODNJO JEKLA
IN JEKLENIH IZDELKOV, d.o.o.
Department: R&D
Address: Cesta Borisa Kidrica 44
e-mail: anton.jaklic@acroni.si
SI-4270 JESENICE
(P)
OUTOKUMPU STAINLES
Responsible: M Sc Gunnar LINDSTRAND
Direct line: +(46) 226/81 957
Direct fax: +(46) 226/81 150
e-mail: gunnar.lindstrand@outokumpu.com
Department: Technology Dept
SE-77422 AVESTA
Contract N°
RFSR-CT-2007-00008
Reference N°
TGS2.05/07
2.263.308 1.357.985
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Cost and energy effective management of EAF with flexible charge material mix
Acronym FLEXCHARGE
:
Objective of the project is the set-up of an innovative methodology to manage in an effective way the EAF charged with the variable materials mix
guarantying the required steel quality, the cost to produce crude steel and the environmental constrains having in mind the volatility of scrap quality-price
ratio and the pressures arising from CO2 trading legislation. Thus the projects will address the issues of maximising the use of low quality scrap in the
charge mix, will investigate the use of the scrap substitutes, like Direct Reduced Iron (DRI) and Hot Briquette Iron (HBI), as alternative to high quality
scrap and will optimize the energy input required to melt down the charged materials.
The development of new operation procedures and control tools will be supported by especially designed laboratory, pilot and industrial tests.
State of progress:
Partners
87
(CO)
CSM
Responsible: Dr Enrico MALFA
Organisation: CSM
Direct line: +(39) 035/69 79 39
Direct fax: +(39) 035/69 79 45
e-mail: e.malfa@c-s-m.it
Address: Piazza Caduti 6 Luglio 1944, 1
IT-24044 DALMINE
(P)
VDEH-BFI
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
Department: R&D
(P)
CRM
Organisation: CRM
Direct line: +(32) 4/254 64 08
Direct fax: +(32) 4/254 64 44
ASBL
(P59)
BE-4000 LIEGE
(P)
FERALPI
Responsible: Ing. Francesco MAGNI
Organisation: FERALPI
Direct line: +(39) 030/999 61
Direct fax: +(39) 030/999 62 09
FERALPI
e-mail: francesco.magni@feralpi.it
Address: Via Industria 23
IT-25017 LONATO (BRESCIA)
(P)
GMH
Responsible: Dr -Ing Ingo KOLM
Organisation: GMH
Direct line: +(49) 5401/394 025
Direct fax: +(49) 5401/394 598
GEORGSMARIENHÜTTE GmbH
e-mail: ingo.kolm@gmh.de
Department: Process Technology
Address: Neue Hüttenstrasse 1
DE-49124 GEORGSMARIENHÜTTE
(P)
MEFOS
Responsible: Dr Erik SANDBERG
Organisation: MEFOS
Direct line: +(46) 920/20 19 94
Direct fax: +(46) 920/25 58 32
INSTITUTE AB
e-mail: erik.sandberg@mefos.se
SE-97125 LULEÅ
(P)
OVAKO BAR
Responsible: ME Risto PONKALA
Organisation: OVAKO BAR
Direct line: +(46) 240/668 398
Direct fax: +(46) 240/668 296
OVAKO BAR AB
e-mail: risto.ponkala@ovako.com
Department: Steel plant
Address:
SE-777 80 SMEDJEBACKEN
88
(P)
SIDENOR I+D
Responsible: Mr Santiago LANDA LAZCANO
Direct line: +(34) 94/487 18 72
Direct fax: +(34) 94/487 18 44 or 81
S.A.
e-mail: santiago_landa@sidenor.com
Contract N°
RFSR-CT-2007-00009
Reference N°
TGS2.06/07
1.011.155
606.693
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Improvement of ladle stirring to minimise slag emulsification and reoxidation during alloying and rinsing
Acronym StImprove
:
The objective of this research project is to improve steel metallurgy and quality by minimising slag emulsification and reoxidation during stirring in
secondary metallurgy. Advanced monitoring of stirring processes will be applied to assess their impact on necessary metallurgical applied operation.
In addition, the duration of melt treatments will be shortened, the dissolution of alloying additions will be improved and the amount of ladle stirring gas will
be reduced. Interaction of stirring process parameters with steel metallurgy will be clarified. This will allow to perform dynamic stirring throughout the
whole necessary treatment time.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr -Ing Herbert KÖCHNER
Direct line: +(49) 211/6707 892
Direct fax: +(49) 211/6707 205
e-mail: herbert.koechner@bfi.de
Department: Process Analysis
(P)
SAARSTAHL
Responsible: Dr Peter VALENTIN
Organisation: SAARSTAHL
Direct line: +(49) 6898/10 38 96
Direct fax: +(49) 6898/10 40 75
SAARSTAHL AG
e-mail: peter.valentin@saarstahl.com
Department: Abt. 551/4, Secundary Metallurgy
Address: Bismarkckstrasse, 57-59
DE-66330 VÖLKLINGEN
(P)
KTH
Responsible: Prof. Dr. Du SICHEN
Organisation: KTH
Direct line: +(46) 8/7908 359
Direct fax: +(46) 8/7900 939
e-mail: du@mse.kth.se
Department: Micro Modelling in Metallurgical Processes
SE-10044 STOCKHOLM
(P)
HUT
Responsible: Prof. Dr Lauri HOLAPPA
Organisation: HUT
Direct line: +(358) 9/451 27 57
Direct fax: +(358) 9/451 27 98
HELSINKI UNIVERSITY OF TECHNOLOGYLaboratory of Metallurgy
Department: Dept. of Materials Science & Rock Engineering
Address: Vuorimiehentie 2
e-mail: lauri.holappa@tkk.fi
FI-02015 ESPOO
89
Contract N°
RFSR-CT-2007-00010
Reference N°
TGS2.07/07
1.563.498
938.099
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Upgrading and utilisation of residual iron oxide materials for hot metal production
Acronym URIOM
:
The proposed project focuses on development of innovative pyrometallurgical technologies for recycling especially of residuals from stainless steel making.
One part deals with the briquetting of stainless steel residuals and direct recycling into the EAF. The other part deals with the development of the
innovative inductive heated coke bed technology as a key process for recycling especially stainless steel residuals in parallel to the EAF with a complete
recovery of alloying elements for steelmaking, zinc for non ferrous metals use and slag usable for building applications as an approach for a zero waste
technology in stainless steel making. To lower the electric energy demand the inductive heated coke bed shall be charged by molten material as well as
preheated coke. For the experimental investigations an existing flash melter shall be used for charging the molten material. The charged coke shall be
treated in a special coke preheater. The inductive heated coke bed technology seems not only to be coupled with a flash melting unit but also applicable to
the low shaft furnace/cupola process like that one operated by TKS for steel works residues. This will broaden the application of the process to stainless
steel residual processing. The need for agglomerated material for the shaft furnace process is the link to the briquetting investigations planned within this
project. The proposed research is in complete accordance with the priority “sustainable use of resources” of the Strategic Research Agenda of ESTEP with
high relevance for the RFCS programme and is specially supported by the ESTEP Working Group 1 “Profit“.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl.-Ing. Gerald STUBBE
Organisation: BFI
Direct line: +(49) 211/6707 969
Direct fax: +(49) 211/6707 205
BETRIEBSFORSCHUNGSINSTITUT
e-mail: gerald.stubbe@bfi.de
Department: R&D
(P)
BEG
Responsible: Mr Michael EBNER
Organisation: BEG
Direct line: +(43) 3862/20 37116
Direct fax: +(43) 3862/20 37585
BÖHLER EDELSTAHL GmbH
e-mail: michael.ebner@bohler-edelstahl.at
Department: Environment & Recycling
Address: Mariazellerstrasse 25
AT-8605 KAPFENBERG
(P)
CSM
Responsible: Drssa Ilaria PISTELLI
Organisation: CSM
Direct line: +(39) 06/505 57 46
Direct fax: +(39) 06/505 54 61
e-mail: i.pistelli@c-s-m.it
IT-00128
(P)
TRIBOVENT
Responsible: DI Alfred EDLINGER
Organisation: TRIBOVENT
Direct line: +(43) 664/3245 665
Direct fax: +(43) 5552/3088 34
TRIBOVENT VERFAHRENSENTWICKLUNG
GmbH
Address: Brunnenfelderstrasse 59
e-mail: alfred.edlinger@tribovent.at
AT-6700 BLUDENZ
90
Contract N°
RFSR-CT-2007-00011
Reference N°
TGS2.08/07
1.377.999
826.800
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Development of steel grade related slag systems with low reoxidation potential in ladle and optimised ladle glaze technique
for improving steel cleanliness
Acronym STEELCLEANCONTROL
:
The technical objective of this project is to investigate the interaction between deoxidised steel (low- and high-alloyed steel grades) melts and oxidic
materials during the process of ladle metallurgy. Finally steel grade specific slag systems and the ladle glaze technique will be optimised in view of low
reoxidation potentials and a low tendency for uncontrolled inclusion formation. In this way steel cleanliness can be improved through lower amounts of nonmetallic inclusions, which has a beneficial impact on productivity and quality of steel products. The formation and modification of inclusion by ladle slags,
ladle lining and ladle glaze will be studied in detail. These aspects will be investigated on selected steel grades both under process and laboratory
conditions. Through the close cooperation between industrial partners and universities optimised slag compositions and treatment strategies will be
developed and verified in practice. European steelworks will finally profit from these project results.
State of progress:
Partners
(CO)
TU BA
Responsible: Prof. Dr.-Ing. Piotr R. SCHELLER
Organisation: TU BERGAKADEMIE
Direct line: +(49) 3731/39 24 07
Direct fax: +(49) 3731/39 24 16
TU BERGAKADEMIE, INSTITUT FÜR EISENUND STAHLTECHNOLOGIE
Address: Leipzigerstrasse 34
e-mail: scheller@iest.tu-freiberg.de
DE-09596 FREIBERG
(P)
KTH
Organisation: KTH
Direct line: +(46) 8/7908 359
Direct fax: +(46) 8/7900 939
SE-10044 STOCKHOLM
(P)
UDDEHOLM
Responsible: Dr Mselly NZOTTA
Organisation: UDDEHOLM
Direct line: +(46) 563/176 81
Direct fax: +(46) 563/174 59
UDDEHOLM TOOLING AB
e-mail: mselly.nzotta@uddeholm.se
Address: 17 Värmlands län
SE-68385 HAGFORS
(P)
SSAB
Responsible: Mrs Mia ALMCRANTZ
Organisation: SSAB
Direct line: +(46) 155/25 56 12
Direct fax: +(46) 155/25 55 41
SSAB OXELÖSUND AB
e-mail: mia.almcrantz@ssab.com
Department: Steelmaking Group, R&D Dept, Primary Products
SE-61380 OXELÖSUND
(P)
TKS-NR
Responsible: Dr -Ing Jörg-Friedrich HOLZHAUSER
Organisation: KRUPP
Direct line: +(49) 234/919 42 25
Direct fax: +(49) 234/919 73 77
THYSSEN KRUPP NIROSTA GmbH
e-mail: joergfriedrich.holzhauser@thyssenkrupp.com
Address: Alleestrasse 165
DE-44793 BOCHUM
91
Contract N°
RFSR-CT-2008-00002
Reference N°
TGS2.01/08
1.128.550
677.130
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Innovative methodology for through process inclusion level forecasting of engineering steel
Acronym INCLUSION
:
The project objective is to develop a tool of "intelligent manufacturing" based on statistical inclusion analysis.
The intelligent manufacturing is based on the correlation among the inclusion taken during steelmaking route and inclusions on the product and this fact will
allow to control the subsequent rolling operation, helping the operator to make the best coupling of inclusion characteristics and leel of rolling.
The statistical methodology selected is the extreme value statistic, which allows the description of an inclusion family in terms of maximum defect
measured.
State of progress:
Partners
(CO)
CAS
Responsible: Ing. Valentina VICARIO
Organisation: CAS
Direct line: +(39) 0165/302 638
Direct fax: +(39) 0165/302 423
COGNE ACCIAI SPECIALI SpA
e-mail: valentina.vicario@cogne.com
Department: Quality Laboratory
Address: Via Paravera 16
IT-11100 AOSTA
(P)
CSM
Responsible: Dr. Filippo CIRILLI
Organisation: CSM
Direct line: +(39) 06/505 5483
Direct fax: +(39) 06/505 5461
e-mail: f.cirilli@c-s-m.it
IT-00128
(P)
SIDENOR I+D
Responsible: Mr Jacinto ALBARRAN SANZ
Direct line: +(34) 94/487 17 98
Direct fax: +(34) 94/487 18 44
S.A.
Department: New Products
e-mail: jacinto_albarran@sidenor.com
(P)
VDEH-BFI
Responsible: Dipl -Ing Norbert LINK
Direct line: +(49) 211/6707-245
Direct fax: +(49) 211/6707-923 245
e-mail: norbert.link@bfi.de
Department: R&D
92
Contract N°
RFSR-CT-2008-00003
Reference N°
TGS2.02/08
1.698.420 1.019.052
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Optimised production of low C and N steel grades via the electric steelmaking route
Acronym LOWCNEAF
:
The main objective of the project is to develop a through-process control strategy for a reliable, simultaneous achievement of low steel carbon and nitrogen
levels within electric steelmaking under minimum energy and material costs with optimal productivity. This shall be achieved by investigation of relevant
operational parameters and modelling of pick-up and removal of C and N within all aggregates of the process route. Regarding EAF, focus will be laid on
the use of alternative
iron materials (pig iron, DRI/HBI) to lower C and N contents at tapping. The control system will be applied on-line at five electrical steelmaking plants
with different process routes and aggregates (EAF,LF,VD) for various steel products (wire, beam blanks, sectionals, SBQ, slabs).
State of progress:
Partners
(CO)
VDEH-BFI
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
Department: R&D
(P)
CRM
Organisation: CRM
Direct line: +(32) 4/254 64 08
Direct fax: +(32) 4/254 64 44
ASBL
(P59)
BE-4000 LIEGE
(P)
RIVA
Responsible: Dr -Ing Nicola VENERI
Organisation: RIVA ACCIAIO
Direct line: +(39) 045/805 8111
Direct fax: +(39) 045/591 564
RIVA ACCIAIO - VERONA WORKS
e-mail: acciaieria.verona@rivagroup.com
Department: Steelshop Production
Address: Lungadige Galtarossa 21/C
IT-37133 VERONA
(P)
PEINER TRAGER
Responsible: Mr Matthias SCHÖRING
Organisation: PEINER TRAGER
Direct line: +(49) 5171/91 9890
Direct fax: +(49) 5171/91 7901
PEINER TRÄGER GmbH
e-mail: schoering.m@salzgitter-ag.de
Department: Steel Plant
Address: Gerhard-Lucas-Meyer-Strasse 10
DE-31226 PEINE
(P)
SIDENOR I+D
Responsible: Mr Asier ARTEAGA
Direct line: +(34) 94/487 20 07
Direct fax: +(34) 94/487 18 81 or 44
S.A.
e-mail: asier_arteaga@sidenor.com
93
(P)
ARCELOR
Responsible: Dr José Luis RENDUELES VIGIL
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
e-mail: jose-luis.rendueles@arcelormittal.com
Department: I&R Process
Contract N°
RFSR-CT-2008-00004
Reference N°
TGS2.03/08
1.838.043 1.102.826
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Control of slag and refining conditions in the BOF
Acronym BATHFOAM
:
Control of slag foaming the BOF has always been problematic. With increased pressure on process yields and productivity, combined with increased
demands for accurate control of refining in the process it is important to develop a process control tool that can control slag foaming and thus consistently
achieve the
optimum performance from both a perspective of slopping control as well as refining in the BOF.
The project aims to use static and dynamic process data from many sources in the process and relate them to process performance by using advanced
statistical analysis tools. This will be used, combined with data from analytical models for the BOF refining reactions, to develop a process control system
that pro-actively controls slag formation in the BOF.
If successful the project should result in improved productivity and process yields, as well as reduced flux consumption and dust emissions from the plants.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Ir. Johan VAN BOGGELEN
Direct line: +(44) 44/1642 382 024
Direct fax: +(44) 44/1642 460 321
TECHNOLOGY CENTRE
e-mail: johan.van.boggelen@corusgroup.com
(P)
VDEH-BFI
Direct line: +(49) 211/6707-385
Direct fax: +(49) 211/6707-310
Department: R&D
(P)
KTH
Organisation: KTH
Direct line: +(46) 8/7908 359
Direct fax: +(46) 8/7900 939
SE-10044 STOCKHOLM
(P)
POLIMI
Responsible: Prof. Walter NICODEMI
Direct line: +(39) 02/2399 8283
Direct fax: +(39) 02/2399 8202
POLITECNICO DI MILANO - DIPARTIMENTO DI
MECCANICA
Department: Material Section
Address: Via La masa 34
e-mail: walter.nicodemi@polimi.it
IT-20156 MILANO
94
(P)
ARCELOR RESEARCH
Responsible: Dr. Jean-Christophe HUBER
Direct line: +(33) 3/87 70 43 24
Direct fax: +(33) 3/87 70 41 00
e-mail: jean-christophe.huber@arcelormittal.com
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
95
Technical Group TGS3 :"Casting, reheating and direct rolling"
Contract N°
RFSP-CT-2005-00008
Reference N°
TGS3.1/05
1.467.897
587.159
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2009
Title: Direct casting of small sections beam-blanks thanks to meniscus free casting technology
Acronym Beam-blank MFC
:
The aim of this demonstration project is to show, through pilot trials, that beam blanks for the production of small sections can be cast continuously close
to the final shape using Meniscus Free Casting technology. The pilot caster at Arcelor Research will be used to optimise the process in terms of
productivity, production costs and quality.
Substantial savings are expected for the casting operations due to streamlined process and the simplicity of the installation. Additional cost reductions of at
least 15 €/ton are expected for the rolling operations due to hot charging and the reduction of the number of rolling passes. The installations associated with
the
process will be very compact, leading to further savings on investment costs.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mr Martin BEAUVAIS
Direct line: +(33) 3/87 70 42 34
Direct fax: +(33) 3/87 70 41 00
e-mail: martin.beauvais@arcelormittal.com
(P)
ARCELOR PROFIL
Responsible: Dr. Pierre HUBSCH
Direct line: +(352) 5313/21 63
Organisation: PROFILARBED
Direct fax: +(352) 54/79 64
ProfilARBED S.A.
e-mail: pierre.hubsch@arcelormittal.com
Address: 66, Route de Luxembourg
Contract N°
RFSR-CT-2005-00009
Reference N°
TGS3.2/05
2.056.119 1.233.672
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Real-time intelligent diagnostics and optimisation of reheating furnace performance
Acronym SMARTFIRE
:
The overall project aims are to improve reheating furnace operation, maintenance and product quality by improved diagnostics, monitoring and control of
process parameters.
This will be achieved by developing an innovative flame analysis system and determination of combustion and furnace diagnostics using databases and
statistical and physical models. These approaches will be amalgamated into a new prototype diagnostics, warning and suggestion (DWS) system. The DWS
methodology will be used in at least two partner countries to optimise reheating
furnace operation and reheated stock. Thus, the competitiveness and efficiency of the EU steel industry will be improved.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Mr Graham ANDREWS
Direct line: +(44) 1709/825 390
Direct fax: +(44) 1709/825 400
CENTRE
e-mail: graham.andrews@corusgroup.com
Rotherham
96
(P)
ACERALIA
Responsible: Mr Luis Antonio RODRIGUEZ LOREDO
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
e-mail: luis.rodriguez-loredo@arcelormittal.com
Department: Control & Measurement
(P)
VDEH-BFI
Responsible: Dr. -Ing. Guido MITTLER
Direct line: +(49) 211/6707 887
Direct fax: +(49) 211/6707 205
e-mail: guido.mittler@bfi.de
Department: R&D
(P)
MEFOS
Responsible: Dr. Bo LEDEN
Direct line: +(46) 920/20 19 77
Organisation: MEFOS
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: bo.leden@mefos.se
SE-97125 LULEÅ
(P)
UG
Responsible: Prof. Steven WILCOX
Direct line: +(44) 1443/482 810
Organisation: UG
Direct fax: +(44) 1443/483 578
UNIVERSITY OF GLAMORGAN
e-mail: sjwilcox@glam.ac.uk
Department: Intelligent Systems Engineering
Address: Llantwit Road Treforest
GB- PONTYPRIDD CF37 1DL
Contract N°
RFSR-CT-2005-00010
Reference N°
TGS3.3/05
1.858.335 1.115.001
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: New strategies for clogging prevention for improved productivity and steel quality
Acronym CLOGGING
:
Clogging is still a problem to solve. To achieve a break through in this project a new basic knowledge will be elaborated as a basis for the development of
new strategies for clogging prevention like new feeding system designs in conjunction with innovative gas injection, prediction and control of clogging.
This will be done in an integrated approach concerning chemical and physical phenomena in conjunction with an extensive operational data base using
advanced or newly developed investigation and measurement methods.
The obtained results will be verified by operational data and trials with a view to a final implementation of the new strategies in the operational praxis.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Sigurd RÖDL
Direct line: +(49) 211/6707-294
Direct fax: +(49) 211/6707-205
e-mail: sigurd.roedl@bfi.de
97
(P)
COMDICAST
Responsible: Dr. Sven EKEROT
Organisation: COMDICAST
Direct line: +(46) 8/754 52 88
Direct fax: +(46) 8/754 52 88
COMDICAST AB
e-mail: ekerot.group@telia.com
Address: Idrottsvägen 35
SE-19266 SOLLENTUNA
(P)
VOEST-ALPINE
Responsible: Dr. Guangmin XIA
Direct line: +(43) 50304/15 57 15
Direct fax: +(43) 50304/15 29 11
e-mail: guangmin.xia@voestalpine.com
AT-4020 LINZ
(P)
RIVA
Direct line: +(39) 045/805 8111
Direct fax: +(39) 045/591 564
IT-37133 VERONA
(P)
SSSA
Organisation: SSSA
Direct line: +(39) 050/883 079
Direct fax: +(39) 050/883 333
SANT'ANNA
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
DE-52072 AACHEN
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
(P)
KTH
Responsible: Dr. Margareta ANDERSSON
Organisation: KTH
Direct line: +(46) 8/79 083 47
Direct fax: +(46) 8/20 76 81
e-mail: maggan@mse.kth.se
SE-10044 STOCKHOLM
98
Contract N°
RFSR-CT-2005-00011
Reference N°
TGS3.4/05
1.286.510
771.905
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Enhanced as-cast product quality by optimised mould taper design
Acronym SOLIMOULD
:
The aim of this project is to investigate how the taper in combination with shrinkage, operational parameters and other mould conditions (wear and
distortion) affects as-cast product quality for different semis formats, namely
billets and slabs. The achievement of this objective will provide crucial information for the optimisation of mould design and operational parameters,
looking for the as-cast product quality improvement. Plant trials will be supported by mathematical modelling concerning early solidification and the
interaction between solidified shell and mould.
This is a collaborative work between Sidenor I+D, Centro Sviluppo Materiali (CSM), Corus UK Ltd and Betriebsforschungsinstitut (BFI).
State of progress:
Partners
(CO)
SIDENOR I+D
Responsible: Dr. Inigo UNAMUNO
Direct line: +(34) 944/871 878
Direct fax: +(34) 944/871 844
S.A.
e-mail: inigo_unamuno@sidenor.com
(P)
CSM
Responsible: Dr. Maria Rita RIDOLFI
Organisation: CSM
Direct line: +(39) 06/505 53 16
Direct fax: +(39) 06/505 54 61
e-mail: m.ridolfi@c-s-m.it
IT-00128
(P)
CORUS UK
Responsible: Mr Andrew CHOWN
Direct line: +(44) 1642/77 00 16
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: andrew.chown@corusgroup.com
(P)
VDEH-BFI
Responsible: Dr. -Ing. Oliver BREITFELD
Direct line: +(49) 211/6707 619
Direct fax: +(49) 211/6707 205
e-mail: oliver.breitfeld@bfi.de
Department: R&D
99
Contract N°
RFSR-CT-2005-00012
Reference N°
TGS3.5/05
2.046.240 1.227.745
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Optimising slag film properties and determination of operational windows for lubrication, mould heat transfer and shell
formation
Acronym SLAGFILMOWL
:
The objective of this project is to optimise the lubrication within the mould and heat transfer from the shell to the mould via the definition of operational
windows for the mould powder and numerical simulation of fluid flow at the meniscus and the effects of stresses and deformation on the forming shell. The
operational windows will be defined through a correlation of slag and slag film properties, observed surface defects, caster and casting operational
parameters and numerical simulation and model predictions. Achievement of the objectives will result in an improvement in as-cast surface quality.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr Bridget STEWART
Direct line: +(44) 1642/382 097
Direct fax: +(44) 1642/457 919
CENTRE
e-mail: bridget.stewart@corusgroup.com
Rotherham
(P)
KIMAB
Responsible: M.Sc. Carl-Ake DÄCKER
Organisation: KIMAB
Direct line: +(46) 8/545 274 42
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: carlake.dacker@swerea.se
Department: Casting and Solidification Research Group
Address: Drottning Kristinas väg 48
SE-11428 STOCKHOLM
(P)
OUTOKUMPU STAINLES
Responsible: MSc Appell ANDERS
Direct line: +(46) 226/810 57
Direct fax: +(46) 226/811 40
e-mail: anders.appell@outokumpu.com
Department: Process Development Avesta Melt Shop
SE-77422 AVESTA
(P)
SIDENOR I+D
Direct line: +(34) 944/871 878
Direct fax: +(34) 944/871 844
S.A.
(P)
VDEH-BFI
Responsible: Dr. -Ing. Oliver BREITFELD
Direct line: +(49) 211/6707 619
Direct fax: +(49) 211/6707 205
e-mail: oliver.breitfeld@bfi.de
Department: R&D
100
(P)
GMH
Responsible: Dr -Ing Ingo KOLM
Direct line: +(49) 5401/394 025
Organisation: GMH
Direct fax: +(49) 5401/394 598
GEORGSMARIENHÜTTE GmbH
e-mail: ingo.kolm@gmh.de
Department: Process Technology
Address: Neue Hüttenstrasse 1
DE-49124 GEORGSMARIENHÜTTE
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/505 53 15
Direct fax: +(39) 06/505 54 61
IT-00128
Contract N°
RFSR-CT-2005-00013
Reference N°
TGS3.6/05
1.235.681
741.409
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Innovative tundish management for final steel thermal and chemical adjustment
Acronym TUNDJUST
:
The research aim is to found possible/feasible actions on tundish casting for thermal/chemical adjustments:
- thermal heating via chemical reactions at bath-insulating powder interface;
- steel composition adjustment where mixing conditions are favourable;
As a matter of fact, typical drawbacks when performing in ladle these metallurgy operations are:
- time lag before tapping can increase bath re-oxidation affecting steel cleanliness ;
- alloying elements re-oxidised, are lost in inclusions with failure of target composition.
The work, carried out by CSM (Co-ordinator), CAS, BFI and KEP, is supported by modelling tools (CFD /physical), laboratory tests and operational plant
trials on carbon and stainless steels.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Michele DE SANTIS
Organisation: CSM
Direct line: +(39) 06/505 58 31
Direct fax: +(39) 06/505 54 52/61
e-mail: m.desantis@c-s-m.it
IT-00128
(P)
CAS
Responsible: Dr. Armando POLI
Organisation: CAS
Direct line: +(39) 0165/302 569
Direct fax: +(39) 0165/302 423
e-mail: armando.poli@cogne.com
Department: Rolling
IT-11100 AOSTA
(P)
VDEH-BFI
Responsible: Dr.-Ing. Michael MATZKEIT
Direct line: +(49) 211/6707 893
Direct fax: +(49) 211/6707 205
e-mail: michael.matzkeit@bfi.de
Department: R&D
101
(P)
DEW
Organisation: DEW
Direct line: +(49) 271/808 26 57
Direct fax: +(49) 271/808 23 23
DE-57078 SIEGEN
Contract N°
RFSR-CT-2005-00014
Reference N°
TGS3.7/05
1.911.068 1.146.641
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Precipitation behaviour of microalloyed steels during solidification and cooling
Acronym PRECIPITATION
:
The objective of this research proposal is to extend significantly the area of knowledge of the precipitation of nitrides, carbides and complex particles
during solidification and cooling of microalloyed steel grades and to investigate their effect on as-cast surface quality. The proposed work will include the
investigations into the effect of the solidification and cooling rates on precipitation, strain induced precipitation of particles and their interaction with strain
induced ferrite and modified steel chemistries that result in fewer surface defects and reduced microstructural banding. To achieve the overall objective, the
approach to the project is threefold; industrial plant based, numerical modelling and laboratory and pilot plant based.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Shahid RIAZ
Direct line: +(44) 1642/382 102
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: shahid.riaz@corusgroup.com
(P)
SIDENOR I+D
Responsible: Dr Gonzalo ALVAREZ DE TOLEDO
Direct line: +(34) 94/487 18 54
Direct fax: +(34) 94/487 18 81
S.A.
e-mail: gonzalo_alvarez@sidenor.com
(P)
KIMAB
Responsible: Dr Stanislaw ZAJAC
Organisation: KIMAB
Direct line: +(46) 8/440 48 84
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: stanislaw.zajac@swerea.se
Department: Metallography Research Group
SE-11428 STOCKHOLM
(P)
VASD
Responsible: Dipl. -Ing. Dr. Axel SORMANN
Direct line: +(43) 3842/201 22 75
Direct fax: +(43) 3842/201 49 26
VOEST-ALPINE STAHL DONAWITZ
e-mail: axel.sormann@voestalpine.com
Department: Forschung & Entwicklung
Address: Kerpelystrasse 199
AT-8700 LEOBEN-DONAWITZ
102
(P)
ARCELOR RESEARCH
Responsible: Mr Yann LE PAPILLON
Direct line: +(33) 3/87 70 40 19
Direct fax: +(33) 3/87 70 41 00
e-mail: yann.le-papillon@arcelormittal.com
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
DE-52072 AACHEN
Contract N°
RFSR-CT-2006-00007
Reference N°
TGS3.01/06
2.549.660 1.529.796
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Quality improvement by metallurgical optimised stock temperature evolution in the reheating furnace including
microstructure feedback from the rolling mill
Acronym OPTHEAT
:
The overall project aims are to optimise product quality, reheating furnace operation and material yield by improved monitoring and control of the reheating
furnace and rolling mill.
This will be achieved by heating according to new heating curves optimised with respect to the microstructure of the steel, handling of stops and changes of
steel grades in the rolling mill. The new heating curve will be developed through a combination of laboratory experiments, industrial trials and theoretical
modelling approach for the microstructure, stock temperature and energy consumption.
The new heating strategies will be implemented in four partner countries to optimise the furnace and rolling mill operation. Thus, the competitiveness and
efficiency of the EU steel industry will be improved.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr -Ing Rolf KLIMA
Direct line: +(49) 211/670 72 84
Direct fax: +(49) 211/670 72 05
e-mail: rolf.klima@bfi.de
Department: Energiewirtschaft und Wärmetechnik
(P)
FUNDACION LABEIN
Responsible: Mr Jon BARCO
Organisation: FUNDACION LABEIN
Direct line: +(34) 94/607 33 00
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: barco@labein.es
Address: Parque Tecnologico de Bizkaia
C/Geldo, Edificio 700
ES-48160 DERIO
(P)
MEFOS
Responsible: Dr. Bo LEDEN
Organisation: MEFOS
Direct line: +(46) 920/20 19 77
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: bo.leden@mefos.se
SE-97125 LULEÅ
103
(P)
SIDENOR I+D
Responsible: Mr José Manuel LLANOS
Direct line: +(34) 94/487 18 96
Direct fax: +(34) 94/487 18 44
S.A.
Department: Forging, Rolling & Casting
e-mail: jose_m_llanos@sidenor.com
(P)
IMT
Responsible: Dr. Anton JAKLIC
Organisation: IMT
Direct line: +(386) 1/470 19 99
Direct fax: +(386) 1/470 19 39
INSTITUT ZA KOVINSKE MATERIALE IN
TEHNOLOGIJE
Department: Laboratory for measurements in heat engineering
Address: Lepi pot 11
e-mail: anton.jaklic@imt.si
SI-1000 LJUBLJANA
(P)
SANDVIK STEEL
Responsible: M.Sc. Ebrahim MOOSAVI
Organisation: SANDVIK STEEL
Direct line: +(46) 26/263 446
Direct fax: +(46) 26/264 320
SANDVIK MATERIALS TECHNOLOGY AB
e-mail: ebrahim.moosavi@sandvik.com
Address: (Storgatan 2)
SE-81181 SANDVIKEN
(P)
ACB
Responsible: Mr Juan I. LANGARA
Organisation: ACB
Direct line: +(34) 94/489 44 51
Direct fax: +(34) 94/489 44 71
ACERIA COMPACTA DE BIZAKAIA SA
e-mail: juan.langara@arcelormittal.com
Department: Technological Innovation
Address: Calle Chavarri 6
ES-48910 SESTAO (BIZAKAIA)
(P)
INASMET
Responsible: Dr. Felix PENALBA DIAZ
Organisation: INASMET
Direct line: +(34) 943/003 700
Direct fax: +(34) 943/003 800
Fundación INASMET
e-mail: fpenalba@inasmet.es
Department: Steel Division
Address: Paseo Mikeletegui 2
ES-20009 SAN SEBASTIAN- GUIPUZCOA
104
Contract N°
RFSR-CT-2006-00008
Reference N°
TGS3.02/06
2.481.055 1.488.633
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 31/12/2009
Title: CO2 reduction in reheating furnaces
Acronym CO2RED
:
The objective of this project is to demonstrate the capability of new technology, such as regenerative and oxyfuel combustion system based on flameless
oxidation to allow a step change in environmental impact of steel reheating furnaces reducing at the same time the CO2 and NOx emissions in comparison
with
conventional furnaces equipped with central recuperator and flame burners.
To reach this goal regenerative and oxyfuel combustion systems will be tested in pilot and industrial furnaces and investigated with the support of CFD
combustion modelling. The effect of new combustion systems on the product quality will also be analysed.
The project will give recommendation for the best practice to install and operate with high reliability the new combustion systems in reheating furnaces for
different type of gas gaseous fuels with high reliability
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Enrico MALFA
Organisation: CSM
Direct line: +(39) 035/697 939
Direct fax: +(39) 035/697 945
e-mail: e.malfa@c-s-m.it
IT-24044 DALMINE
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
AGA
Responsible: Mr Tomas EKMAN
Organisation: AGA
Direct line: +(46) 8/731 14 97
Direct fax: +(46) 8/765 56 66
AGA AB
e-mail: tomas.ekman@linde-gas.com
Address:
SE-181 81 LIDINGÖ
(P)
VDEH-BFI
Responsible: Dipl. Ing. Wolfgang ADLER
Direct line: +(49) 211/6707 309
Direct fax: +(49) 211/6707 205
e-mail: wolfgang.adler@bfi.de
Department: R&D
(P)
FERALPI
Responsible: Ing. Francesco MAGNI
Organisation: FERALPI
Direct line: +(39) 030/999 61
Direct fax: +(39) 030/999 62 09
FERALPI
e-mail: francesco.magni@feralpi.it
Address: Via Industria 23
IT-25017 LONATO (BRESCIA)
105
(P)
MEFOS
Responsible: MSc Anders RENSGARD
Direct line: +(46) 920/20 19 78
Organisation: MEFOS
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: anders.rensgard@mefos.se
SE-97125 LULEÅ
(P)
TECHINT
Responsible: Ing. Maurizio SENAREGA
Direct line: +(39) 010/605 48 95
Direct fax: +(39) 010/605 47 41
TENOVA / Strip Processing Lines
e-mail: maurizio.senarega@techint.it
Address: Torre Shipping
Via De Marini, 53
IT-16149 GENOVA
Contract N°
RFSR-CT-2006-00018
Reference N°
TGS3.03/06
1.676.679 1.006.007
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Grain size control in steel by means of dispersed non-metallic inclusions
Acronym GRAINCONT
:
The goal of the project is to create a ground for an industrial technology utilising the promising concept of grain size control by means of dispersoidic
inoculants placed into the steel microstructure. The project objectives are to create and improve the basic knowledge of grain refining ferroalloys and to
develop and
establish a new addition technique applicable for steel continuous casting.
The new opportunities for grain size control will have an impact on the development of entirely novel steel grades and products.
The project involves partners that have been selected for their specific knowledge and prior work in the field.
State of progress:
Partners
(CO)
KTH
Responsible: Dr. Margareta ANDERSSON
Organisation: KTH
Direct line: +(46) 8/79 083 47
Direct fax: +(46) 8/20 76 81
e-mail: maggan@mse.kth.se
SE-10044 STOCKHOLM
(P)
HUT
Organisation: HUT
Direct line: +(358) 9/451 27 57
Direct fax: +(358) 9/451 27 98
FI-02015 ESPOO
(P)
CRM
Responsible: Mr Paul NAVEAU
Organisation: CRM
Direct line: +(32) 4/254 64 06
Direct fax: +(32) 4/254 64 44
ASBL
e-mail: naveau@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
106
(P)
ARCELOR RESEARCH
Responsible: Dr. Thierry IUNG
Direct line: +(33) 3/87 70 47 40
Direct fax: +(33) 3/87 70 47 12
e-mail: thierry.iung@arcelormittal.com
Department: Cluster Manager
(P)
COMDICAST
Responsible: Dr. Sven EKEROT
Direct line: +(46) 8/754 52 88
Organisation: COMDICAST
Direct fax: +(46) 8/754 52 88
COMDICAST AB
e-mail: ekerot.group@telia.com
Address: Idrottsvägen 35
SE-19266 SOLLENTUNA
Contract N°
RFSR-CT-2007-00012
Reference N°
TGS3.01/07
1.904.900 1.142.940
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Improvement to steel cleanness, castability and surface quality through the application of magneto-hydrodynamics during
pouring and solidification
Acronym MAGNETOHYDRO
:
The objective of this research is to improve steel cleanness, including improvement to the size and distribution of non-metallics in the as-cast semi to
improve downstream processing and final properties, using conventional single M-EMS and modern multimode M-EMS and technologies to control
segregation. In addition, the project is aimed at the optimisation of M-EMS parameters to both minimise powder/slag entrapment and reduce power
consumption for both long and flat products. The novel application of electromagnetics to control the meniscus and flow in the SEN will also be
investigated. To support the industrial trials, there will be an extensive programme of pilot plant casts and an extensive programme of numerical and
physical modelling.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Shahid RIAZ
Direct line: +(44) 1642/382 102
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: shahid.riaz@corusgroup.com
(P)
SIDENOR I+D
Responsible: Dr Gonzalo ALVAREZ DE TOLEDO
Direct line: +(34) 94/487 18 54
Direct fax: +(34) 94/487 18 81
S.A.
e-mail: gonzalo_alvarez@sidenor.com
(P)
VASD
Responsible: Dipl -Ing Karin ROCKENSCHAUB
Direct line: +(43) 3842/201 4659
Direct fax: +(43) 3842/201 4926
VOESTALPINE STAHL DONAWITZ GmbH & CO
KG
Department: Forschung & Entwicklung
Address: Kerpely Strasse 199
e-mail: karin.rockenschaub@voestalpine.com
AT-8700 LEOBEN
107
(P)
HUT
Responsible: Dr Seppo LOUHENKILPI
Organisation: HUT
Direct line: +(358) 9/451 27 58
Direct fax: +(358) 9/451 27 98
e-mail: seppo.louhenkilpi@tkk.fi
FI-02015 ESPOO
(P)
VDEH-BFI
Responsible: Dr Ralph STRIEDINGER
Direct line: +(49) 211/6707-894
Direct fax: +(49) 211/6707-205
e-mail: ralph.striedinger@bfi.de
Department: R&D
(P)
ARCELOR RESEARCH
Responsible: Dr Jean-François DOMGIN
Direct line: +(33) 3/87 70 43 58
Direct fax: +(33) 3/87 70 41 04
e-mail: jean-francois.domgin@arcelormittal.com
Contract N°
RFSR-CT-2007-00013
Reference N°
TGS3.02/07
1.780.199 1.068.120
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Innovative non-contact, non-destructive sensors for automatic detection of surface and internal defects in hot
continuously cast products
Acronym NDTCASTING
:
The quality of slabs is the basis of good quality for all other steel products in the downstream production process.
The automatic on-line detection and logging of surface, subsurface and internal defects for the controlling and optimization of the scarfing process and for
use during continuous casting is important. An EMAT/EMAT Phased-Array-System and a LASER/EMAT-System will be developed to detect these
defects. The Conoscopic-Holography-System can currently only find repetitive longitudinal defects and this system needs to be further developed. The
control of downstream processes for tracing steel through the mill will be also bringing big advantages to the steel industry.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl Phys Ing Dietmar OBERHOFF
Direct line: +(49) 211/6707 207
Direct fax: +(49) 211/6707 923 207
e-mail: dietmar.oberhoff@bfi.de
Department: R&D
(P)
CORUS UK
Responsible: Mr Iain BAILLIE
Direct line: +(44) 1642/382 000
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: iain.baillie@corusgroup.com
108
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 58
Direct fax: +(34) 98/512 63 75
(P)
SSSA
Direct line: +(39) 050/883 079
Organisation: SSSA
Direct fax: +(39) 050/883 333
SANT'ANNA
Contract N°
RFSR-CT-2008-00005
Reference N°
TGS3.01/08
1.565.787
939.472
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Mastering billet casting through integration of innovative mould sensoring and on line billet surface quality monitoring
Acronym MASTERBILLET
:
The aim of the proposal is the development of two equipments with innovative sensors able to improve the control of casting conditions for each billet. The
first instrument is for the measure of the liquid steel level in the mould and the layer thickness of casting powders; the second is for the measure of the
thermal field of high part mould. Associating them to the automatic inspection of the surface of each billet and appropriate elaboration will allow the
definition of the rules for rigorous control of the casting conditions. The system will recognize the anomalous casting conditions and will indicate to the
operational worker the actions to carry out in order to correct the found anomalies to guarantee a as
cast product of better quality. The attended results are a grinding decreasing, energy savings and an improvement of the working environment.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Franco MACCI
Organisation: CSM
Direct line: +(39) 06/505 53 28
Direct fax: +(39) 06/505 54 61
e-mail: f.macci@c-s-m.it
IT-00128
(P)
ORI MARTIN
Direct line: +(39) 030/399 92 65
Direct fax: +(39) 030/200 09 24
BRESCIA
IT-25128 BRESCIA
(P)
SIDENOR I+D
Direct line: +(34) 944/871 878
Direct fax: +(34) 944/871 844
S.A.
109
(P)
VDEH-BFI
Responsible: Dr. Torsten LAMP
Direct line: +(49) 211/6707 256
Direct fax: +(49) 211/6707 205
e-mail: torsten.lamp@bfi.de
Department: R&D
Contract N°
RFSR-CT-2008-00006
Reference N°
TGS3.02/08
2.108.929 1.265.358
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Active tundish metallurgy
Acronym AcTuM
:
The project objective is to develop active tundish process by applying tailored covering slag with high capacity to efficiently absorb macro- and
microinclusions from different steels. Thorough investigation of interfacial phenomena controlling inclusion removal and dissolution into tundish slag are
performed to guide the slag section.
Optimized flow patterns for inclusion removal in steady state and transient conditions are studied by water modelling and CFD simulation. Refractory
materials are evaluated in accordance with the steel and inclusion chemistry and quality requirements.
Steel grades are selected for theoretical examination and experimental trials, particularly to reduce cleanness problems and increase sequence length.
State of progress:
Partners
(CO)
HUT
Organisation: HUT
Direct line: +(358) 9/451 27 57
Direct fax: +(358) 9/451 27 98
FI-02015 ESPOO
(P)
TU BA
Responsible: Prof. Dr.-Ing. Piotr R. SCHELLER
Organisation: TU BERGAKADEMIE
Direct line: +(49) 3731/39 24 07
Direct fax: +(49) 3731/39 24 16
TU BERGAKADEMIE, INSTITUT FÜR EISENUND STAHLTECHNOLOGIE
Address: Leipzigerstrasse 34
e-mail: scheller@iest.tu-freiberg.de
DE-09596 FREIBERG
(P)
SIDENOR I+D
Responsible: Mr Gorka ROJO
Direct line: +(34) 94/4871 804
Direct fax: +(34) 94/4871 844
S.A.
e-mail: gorka_rojo@sidenor.com
(P)
FUNDACION LABEIN
Responsible: Ms Mónica SERNA
Direct line: +(34) 94/607 33 00
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: mserna@labein.es
Department: Steel Processes
ES-48160 DERIO
110
(P)
OVAKO
Responsible: Mr Kari TERHO
Direct line: +(358) 405 59 01 50
Organisation: OVAKO
Direct fax: +(358) 568 023 11
OVAKO BAR OY AB
e-mail: kari.terho@ovako.com
Department: Steelmaking and Casting
Address: Terästehtaantie, 1
FI-55100 IMATRA
(P)
CORUS UK
Responsible: Mr William LAW
Direct line: +(44) 1642/382 127
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: william.law@corusgroup.com
(P)
DEW
Organisation: DEW
Direct line: +(49) 271/808 26 57
Direct fax: +(49) 271/808 23 23
DE-57078 SIEGEN
Contract N°
RFSR-CT-2008-00007
Reference N°
TGS3.03/08
1.874.435 1.124.661
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Integrated models for defect free casting
Acronym DEFFREE
:
The objective is to generate a new modelling based optimization and quality control system for continuous casting. The new concept can be used for offline process design and optimization but also for on-line quality control. The traditional concepts have several drawbacks and it is dif-ficult to find a
comprehensive process optimization and design system. The new concept is based on fundamental features obtained from mathematical models and on
calculated safety ranges for them. The outcome of this approach provides steel industry with a new innovative ap-proach for controlling the continuous
casting process and therefore achieving higher outcome, quality and yield.
State of progress:
Partners
(CO)
HUT
Responsible: Dr Seppo LOUHENKILPI
Organisation: HUT
Direct line: +(358) 9/451 27 58
Direct fax: +(358) 9/451 27 98
e-mail: seppo.louhenkilpi@tkk.fi
FI-02015 ESPOO
(P)
CSM
Responsible: Ing. Alessandro CRISTALLINI
Organisation: CSM
Direct line: +(39) 06/505 53 16
Direct fax: +(39) 06/505 54 73
e-mail: a.cristallini@c-s-m.it
IT-00128
111
(P)
VDEH-BFI
Direct line: +(49) 211/6707-294
Direct fax: +(49) 211/6707-205
(P)
CAS
Responsible: Ing Andrea LANDINI
Direct line: +(39) 0165/30 23 52
Organisation: CAS
Direct fax: +(39) 0165/30 24 23
e-mail: andrea.landini@cogne.com
IT-11100 AOSTA
(P)
DUFERCO
Responsible: Dr Antonio MOLLO
Direct line: +(32) 64/272 869
Direct fax: +(32) 64/272 910
e-mail: a.mollo@duferco.be
BE-7100 LA LOUVIERE
(P)
ISD DUNAFERR
Responsible: Mr Arpad SZELIG
Direct line: +(36) 25/582 852
Organisation: ISD DUNAFERR
Direct fax: +(36) 25/584 772
ISD DUNAFERR DUNAI VASMU Zrt.
e-mail: aszelig@rt.dunaferr.hu
Address: Vasmü tér 1-3.
HU-2400 DUNAÚJVÁROS
Contract N°
RFSR-CT-2008-00008
Reference N°
TGS3.04/08
1.417.420
850.452
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Reduction in surface cracking in as-cast low sulphur and calcium treated steels
Acronym LSSEMIQUAL
:
The objective of this proposal is to attempt to understand why certain low and very low sulphur content and calcium treated steels are more prone to
longitudinal broad face, transverse broad face and corner and network type cracking in the as-cast surface. From this understanding the objective is to
develop the casting practice and/or ‘tune’ the steel chemistry to ensure defect free semis with the consequence of improved hot charging capability and/or
reduced surface
rectification requirements. To achieve the overall objective there are several sub-objectives, each designed to complement the programme and these form
the Work Packages.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Mr Vincent LUDLOW
Direct line: +(44) 1642/382 100
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
Department: Knowledge
e-mail: vince.ludlow@corusgroup.com
112
(P)
ARCELOR PROFIL
Responsible: Mr Nicolas CAILLET
Organisation: ARCELOR PROFIL
Direct line: +(352) 5313 2116
Direct fax: +(352) 5479 64
ARCELORMITTAL BELVAL & DIFFERDANGE
S.A.
Department: Long carbon R&D
Address: Rue de Luxembourg 66
e-mail: nicolas.caillet@arcelormittal.com
(P)
RIVA
Responsible: Ing Mauro NEGRO
Direct line: +(39) 0174718130
Direct fax: +(39) 017477251
RIVA ACCIAIO
e-mail: acciaieria.lesegno@rivagroup.com
Address: Strada Statale 28 Nord
IT-12076 LESEGNO
(P)
VDEH-BFI
Direct line: +(49) 211/6707-294
Direct fax: +(49) 211/6707-205
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80-95792
Direct fax: +(49) 241/80-92368
DE-52072 AACHEN
113
Technical Group TGS4 :"Hot and cold rolling processes"
Contract N°
RFS3-CT-2005-00015
Reference N°
TGS4.1/05
6.750
6.750
Duration
Dates:
3 (Mths)
Starting
Ending
Actual
1/09/2005 30/11/2005 30/11/2005
Title: Stay for applied steel thermal and straightening processes research
Acronym RFS-CR-03012
:
1. As a researcher, it would be profitable to learn from the experience of working in one of Europe's leading private-sector institutes for applied research
and development in the field of steel technology. This involves gain knowledge with training activities on the data-warehouse, control, data analysis, etc. of
the processes’ pilot plants related to my research line during my thesis production, in fields closed to the profile straightening.
2. Take part of the strategies’ design to intend to improve the processes concerning the Project, changing the present configuration based (along with other
parameters) on the result obtained in the numerical simulations required, in a continue feedback (testwork-numerical simulation).
3. Knowledge generation to be consolidated in papers. Our intend is the publication of article between the Universidad de La Rioja and BFI from the
results obtained during the stay period. The Universidad de La Rioja and its candidate are committed to that publications or other information disclosure
wont infringe possible intellectual property rights and wont compromise the protection (such as patentability) of any results, inventions or know-how from
third parties.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr. Axel MAAG
Direct line: +(49) 211/670 73 50
Direct fax: +(49) 211/670 79 23 350
e-mail: axel.maag@bfi.de
(P)
UNIV RIOJA
Responsible: Mr Alpha PERNIA ESPINOZA
Telephone: +(34) 941/249 200
Organisation: UNIV RIOJA
Fax: +(34) 941/299 208
UNIVERSIDAD DE LA RIOJA
e-mail: joaquin.ordieres@dim.unirioja.es
Address: Avenida de la Paz, 107
ES-26004 LOGROÑO
Contract N°
RFSR-CT-2005-00016
Reference N°
TGS4.2/05
1.817.016 1.090.210
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Control of scale during steel processing
Acronym Scale Control
:
Scale is a perennial cause of defects on rolled products, either directly or as a result of persistent ghost marks. This project builds on previous work to
determine optimum processing conditions for special steels (notably ferritic and austenitic stainless steels, micro-alloy strip steels and plate grades), by
characterising furnace scale, residual scale after hydraulic descaling and scale present after primary rolling. A simplified empirical scale growth model will
facilitate interpolation between different steel types and furnace atmospheres. An FE model of scale growth and deformation will predict scale development
during reheating, descaling and rolling. The model work will be tested against laboratory and pilot plant trials.
State of progress:
Partners
(CO)
CORUS UK
Direct line: +(44) 1642/382 097
Direct fax: +(44) 1642/457 919
CENTRE
Rotherham
114
(P)
CSM
Responsible: Dr. Nicoletta ZACCHETTI
Organisation: CSM
Direct line: +(39) 06/505 53 26
Direct fax: +(39) 06/505 53 26
e-mail: n.zacchetti@c-s-m.it
IT-00128
(P)
VDEH-BFI
Responsible: Dr.-Ing. Christian BÜHNER
Direct line: +(49) 211/6707-303
Direct fax: +(49) 211/6707-205
e-mail: christian.buehner@bfi.de
Department: R&D
(P)
MEFOS
Responsible: Dr John NISKA
Direct line: +(46) 920/20 19 86
Organisation: MEFOS
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: john.niska@mefos.se
SE-97125 LULEÅ
(P)
UNIV OULU
Responsible: Prof. Dr Pekka MÄNTYLÄ
Direct line: +(358) 8/553 21 45
Direct fax: +(358) 8/553 21 65
UNIVERSITY OF OULU - DEPARTMENT OF
MECHANICAL ENGINEERING
Department: Mechanical Engineering
Address: Pentti Kaiterankatu 1
e-mail: pekka.mantyla@oulu.fi
FI-90401 OULU
Contract N°
RFSR-CT-2005-00017
Reference N°
TGS4.3/05
1.969.698 1.181.819
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2009
Title: Width-adaptable optimized controlled-cooling systems (WACOOLs) for the production of innovative advanced HSS
grades and the study of strip shape changes while cooling
Acronym WACOOL
:
Efficient production of Advanced High Strength Steels (AHSS) require important and parallel improvement of the rolling process and especially of the
cooling systems.
The microstructures and the resultant mechanical properties of steel depend on the cooling patterns and the steel chemistry.
The prediction of TTT-diagrams and other curves obtained from continuous cooling required for planning the industrial production of AHSS grades will be
performed.
Symmetrically or asymmetrically controllable as well as edge-masking types of width-adaptable and water-efficient laminar-flow cooling systems will be
developed and implemented at 3 HSMs.
To complement the strip-cooling & transformation phenomena, an investigation of the strip shape changes, by means of both mathematical modeling and
AI techniques, all along the cooling path between finishing mill and down coiler will be undertaken with a view to reducing rejects.
State of progress:
Partners
(CO)
CETTO
Responsible: Dr Rer Nat Scaria MANNANAL
Organisation: CETTO
Direct line: +(49) 2102/94 0224
Direct fax: +(49) 2102/94 02 37
CETTO MASCHINENBAU GmbH & Co. KG
e-mail: scaria.mannanal@cetto.de
Address: Dechenstrasse 9-15
DE-40878 RATINGEN
115
(P)
TKS
Responsible: Dipl -Phys Jürgen DREVERMANN
Organisation: TKS
Direct line: +(49) 234/919 27 50
Direct fax: +(49) 234/919 54 70
e-mail: juergen.drevermann@thyssenkrupp.com
Address: 708 WBW-BO-E/E-Messtechnik
DE- 44782 BOCHUM
(P)
ILVA
Responsible: Ing. Massimiliano PAGLIARO
Organisation: ILVA
Direct line: +(39) 0143//413 323
Direct fax: +(39) 0143/745 597
ILVA SpA - NOVI LIGURE WORKS
e-mail: massimiliano.pagliaro@rivagroup.com
Department: Automotive Product
Address: Via Boscomarengo, 1
IT-74100 NOVI LIGURE
(P)
SSSA
Organisation: SSSA
Direct line: +(39) 050/883 079
Direct fax: +(39) 050/883 333
SANT'ANNA
(P)
ACERALIA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
AF
Responsible: Mr José Luis GONZALEZ GARCIA
Organisation: AF
Direct line: +(34) 985/514 024
Direct fax: +(34) 985/514 147
ASTURFEITO S.L.
e-mail: josegonzalez@asturfeito.com
Address: Area industrial de Tabaza parcela B-9
ES-33438 CARREÑO
(P)
CORUS NL
Responsible: Dr. ir. Jaap VAN DER LUGT
Direct line: +(31) 251/49 33 83
Direct fax: +(31) 251/47 02 35
TECHNOLOGY CENTRE
Department: Hot Rolling Process Development
e-mail: jaap.van-der-lugt@corusgroup.com
NL-1970 CA IJMUIDEN
116
Contract N°
RFSR-CT-2005-00018
Reference N°
TGS4.4/05
2.943.354 1.766.012
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2009 30/06/2009
Title: Damage resistant and roughness retaining work rolls for cold rolling and temper rolling
Acronym TOPROLLS
:
The ‘optimal work roll’ for cold rolling and temper rolling depends on mill-specific factors (mill lay-out, rolling practices, product mix). A concerted
approach is proposed to investigate and physically describe the evolution of roll damage, residual stresses and roll surface roughness during rolling, taking
into account the synergy between roll-related and mill-specific factors. A decision tool to tailor roll properties to the mill, including the aspect of
environment protection, will be developed. Prototypes of rolls with superior properties will be developed and tested. Simultaneously, roll inspection
methods and procedures will be improved to eliminate the safety risk of exploding rolls.
State of progress:
Partners
(CO)
CORUS NL
Responsible: Dr. Petrus Henk BOLT
Direct line: +(31) 251/499 847
Direct fax: +(31) 251/470 242
TECHNOLOGY CENTRE
Department: CRDT PRC RMS SUT - (3F22 1-334)
e-mail: henk.bolt@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
ARCELOR RESEARCH
Responsible: Mr Maxime LAUGIER
Direct line: +(33) 3/87 70 42 76
Direct fax: +(33) 3/87 70 47 13
e-mail: maxime.laugier@arcelormittal.com
(P)
AKERS
Responsible: Ir Claude GASPARD
Organisation: AKERS
Direct line: +(32) 4/22 97 240
Direct fax: +(32) 4/22 97 241
AKERS BELGIUM S.A.
e-mail: claude.gaspard@akersrolls.com
Address: Rue de la Barrière, 40
BE-4100 SERAING
(P)
LISMAR
Responsible: Ir. Frans STORK
Organisation: LISMAR
Direct line: +(31) 20/496 60 26
Direct fax: +(31) 20/496 51 74
LISMAR ENGINEERING B.V.
e-mail: f.g.stork@lismar.com
Address: Ambachtenstraat 55
NL-1191 JM OUDERKERK A/D AMSTEL
(P)
CRM
Responsible: Mr Olivier LEMAIRE
Organisation: CRM
Direct line: +(32) 4/361 59 54
Direct fax: +(32) 4/361 59 59
ASBL
e-mail: lemaire@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
117
(P)
CSM
Responsible: Dr.ssa Roberta VALLE
Direct line: +(39) 06/505 5742
Organisation: CSM
Direct fax: +(39) 06/505 5452 or5055488
e-mail: r.valle@c-s-m.it
IT-00128 ROMA EUR
Contract N°
RFSR-CT-2005-00019
Reference N°
TGS4.5/05
1.894.199 1.136.519
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 30/06/2009
Title: Optimisation of final plate flatness by set-up coordination for subsequent manufacturing processes
Acronym FINALPLATEFLATNESS
:
Nowadays the flatness performance of plate manufacturing lines is still tackled in terms of enhanced local flatness of the plates in the line.
The aims of this project are to optimise local flatness approaches and to progress from this basis by taking the flatness requirements of the subsequent
production quantitatively into account in form of a co-ordinated flatness set-up system.
This system will integrate all sub models including models of transfer conditions from process stage to process stage and perform a line through process
flatness prediction.
Based on this a line set-up optimiser connecting local stage rules by a line optimisation strategy will generate the best fitting actions relevant to the
evolution of flatness.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr. Ulrich MÜLLER
Direct line: +(49) 211/670 72 46
Direct fax: +(49) 211/670 73 10
e-mail: ulrich.mueller@bfi.de
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
CORUS UK
Responsible: Dr. Steve HENDERSON
Direct line: +(44) 1642/467 144
Direct fax: +(44) 1642/460 321
TECHNOLOGY CENTRE
e-mail: steve.henderson@corusgroup.com
(P)
MEFOS
Responsible: MSc. Olof WIKLUND
Direct line: +(46) 26/26 52 06
Fax: +(46) 26/25 71 40
e-mail: olla.wiklund@sandvik.com
SE-81181 SANDVIKEN
118
(P)
RUUKKI
Responsible: Mr Pasi LUOTO
Direct line: +(358) 20/592 2203
Direct fax: +(358) 20/592 4382
RAUTARUUKKI OYJ
e-mail: pasi.luoto@ruukki.com
FI-92101 RAAHE
(P)
TKS
Responsible: Dr. Wolfram WEBER
Direct line: +(49) 203/52 45528
Organisation: TKS
Direct fax: +(49) 203 52 24532
e-mail: wolfram.weber@thyssenkrupp.com
DE-47166 DUISBURG
Contract N°
RFSR-CT-2005-00020
Reference N°
TGS4.6/05
1.867.705 1.120.623
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 30/06/2009
Title: Advanced width and camber control
Acronym AWiCCo
:
Aim of the AWiCCo project is the optimisation of the hot rolled strip geometry regarding width and camber.
For this a modern shape control system shall be developed. One component will be a process comprehensive (roughing and finishing mill) width control,
taking all regulating possibilities influencing the width into account. The second component will be a camber control for the roughing mill. In this
connection a new side guiding system for a continuous control of the camber and wedge generation shall
be designed. An interaction analysis will show the interdependencies of those controllers and the possibility of merging.
An improved finished product concerning the desired finished strip geometry shall be achieved.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Mr Roger LATHE
Direct line: +(49) 211/6707 204
Direct fax: +(49) 211/6707 205
e-mail: roger.lathe@bfi.de
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
MEFOS
Responsible: M.Sc. Jan LEVEN
Organisation: MEFOS
Direct line: +(46) 920/20 19 75
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: jan.leven@mefos.se
SE-97125 LULEÅ
119
(P)
UNIV OVIEDO
Responsible: Prof. Francisco ORTEGA FERNANDEZ
Direct line: +(34) 98/510 42 72
Direct fax: +(34) 98/510 42 56
e-mail: fran@api.uniovi.es
Address: c/ Independencia, 13
ES-33004 OVIEDO
(P)
RUUKKI
Responsible: MSc. Juha JOKISAARI
Direct line: +(358) 20/592 27 19
Direct fax: +(358) 20/592 43 82
RAUTARUUKKI OYJ
e-mail: juha.jokisaari@ruukki.com
FI-92101 RAAHE
(P)
VOEST-ALPINE
Responsible: Dipl. -Ing. Wolfgang SEYRUCK
Direct line: +(43) 732/6585 5398
Direct fax: +(43) 732/6980 5398
VOEST-ALPINE STAHL LINZ
e-mail: wolfgang.seyruck@voestalpine.com
Department: Hot Rolling
Address: Postfach 3
AT-4031 LINZ
Contract N°
RFSP-CT-2006-00009
Reference N°
TGS4.01/06
632.679
253.072
Duration
Dates:
24 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2008 30/06/2008
Title: Controlled hydraulic damper to prevent chatter in cold rolling
Acronym Anti-chatter CHD
:
The project aims at installing and testing an innovative mechanical device, called Controlled Hydraulic Damper, to prevent 3rd octave chatter in cold
rolling of thin steel strip. It would provide adequate passive damping to the stands, so that the roll-ability limits due to chatter (rolling speed, achievable
strip thickness or maximal reduction) are widened. The proposal includes vibration analysis, numerical simulation, design and construction of the device,
installation and validation of the anti-chatter device in industrial conditions.
Savings of 8.5 M€/year can be expected for the European production of cold rolled packaging steel.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mr Rémi BONIDAL
Direct line: +(33) 3/87 70 42 93
Direct fax: +(33) 3/87 70 41 01
e-mail: remi.bonidal@arcelormittal.com
(P)
API
Responsible: Mr Laurent VERMOT DES ROCHES
Organisation: API
Direct line: +(33) 2/40 38 84 93
Direct fax: +(33) 2/40 38 89 69
ARCELOR PACKAGING INTERNATIONAL SA
e-mail: laurent.vermot-desroches@packaging.arcelor.com
Address: Quai Langlois
FR-44610 BASSE-INDRE
120
(P)
VAI CLECIM
Responsible: Mr Stéphane GOUTTEBROZE
Organisation: VAI CLECIM
Direct line: +(33) 4/77 29 80 20
Direct fax: +(33) 4/77 29 83 87
SIEMENS VAI METALS TECHNOLOGIES SAS
e-mail: stephane.gouttebroze@siemens.com
Department: R&D
Address: 51 rue Sibert
FR-42400 SAINT CHAMOND
Contract N°
RFSP-CT-2006-00013
Reference N°
TGS4.02/06
1.515.830
606.332
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Roll mark detection on the tandem mill
Acronym ROLLMARK
:
Roll marks created by the cold rolling are tiny defects only revealed by a manual stone brushing. But enhanced by the coating they create unacceptable
defects on the galvanised or painted surface. Benefits would results from automatic detection early after tandem mill, saving about 9 M €/y (defects, claims).
Today no surface inspection system is able to reach the goal. Human inspection is performed after stone brushing on a limited area of strip. The project
aims to develop a technique suitable to detect on-line roll marks at tandem mill exit and assess its detection performances in industrial environment.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Dr Thierry JACQUOT
Direct line: +(33) 3/87 70 41 86
Direct fax: +(33) 3/87 70 41 08
e-mail: thierry.jacquot@arcelormittal.com
(P)
SRI
Responsible: Mr Seppo PYÖRRET
Organisation: SRI
Direct line: +(358) 8/56 35 800
Direct fax: +(358) 8/56 35 801
SR-INSTRUMENTS OY
e-mail: seppo.pyorret@sr-instruments.com
Department: Electronics
Address: Teollisuustie 1
FI-90830 HAUKIPUDAS
(P)
APPW
Responsible: Mr Jean SCHELINGS
Organisation: APPW
Direct line: +(32) 4/236 23 25
Direct fax: +(32) 4/236 23 54
ARCELOR PRODUITS PLATS WALLONIE SA
e-mail: jean.schelings@arcelormittal.com
Department: Line
Address: Quai du Halage 10
BE-4400 FLEMALLE
(P)
VTT
Responsible: Dr. Jouni TORNBERG
Organisation: VTT
Direct line: +(358) 8/551 22 88
Direct fax: +(358) 8/551 23 20
VTT TECHNICAL RESEARCH CENTRE OF
FINLAND - VTT ELECTRONICS
Address: Kaitovÿlä 1
e-mail: jouni.tornberg@vtt.fi
FI-90571 OULU
121
Contract N°
RFSR-CT-2006-00010
Reference N°
TGS4.03/06
2.000.054 1.200.033
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Controlling wear and surface cleanliness during cold rolling
Acronym LOWWEAR
:
Excessive iron fines generation during rolling is of nuisance, both in the mill and in subsequent production steps. The aim of the project is to control the
iron fines and oil residues generated during a cold rolling process. To achieve that objective, research is focused on three poles:
• Establish full understanding on the underlying wear mechanisms.
• Determine the parameters that influence dirt generation during rolling and capture the quantitative effects in a physically based model.
• Development of an online measurement method to determine the amount of generated dirt.
The expected returns are important cost savings in the mill, increase in batch-annealing capacity and a general increase in client satisfaction.
State of progress:
Partners
(CO)
CORUS NL
Responsible: Ir Leon JACOBS
Direct line: +(31) 251/495 103
Direct fax: +(31) 251/495 126
TECHNOLOGY CENTRE
e-mail: leon.jacobs@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
(P)
VDEH-BFI
Responsible: Dr -Ing Jochen KURZYNSKI
Organisation: VDEH
Direct line: +(49) 211/6707 226
Direct fax: +(49) 211/6707 923 226
STAHLINSTITUT VDEh
e-mail: jochen.kurzynski@bfi.de
(P)
CRM
Responsible: Mr Bart VERVAET
Organisation: CRM
Direct line: +(32) 9/264 57 74
Direct fax: +(32) 9/264 58 34
ASBL
Address: Technologie Park, 9
e-mail: vervaet@agt0.ugent.be
BE-9052 ZWIJNAARDE (GENT)
(P)
ARCELOR RESEARCH
Responsible: Ir Cécile PESCI
Direct line: +(33) 3/87 70 40 60
Direct fax: +(33) 3/87 70 47 13
e-mail: cecile.pesci@arcelormittal.com
122
(P)
MEFOS
Responsible: PhD Nils-Göran JONSSON
Organisation: MEFOS
Direct line: +(46) 920/20 19 71
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: nils-goran.jonsson@mefos.se
SE-97125 LULEÅ
(P)
TU BA
Responsible: Prof. Dr -Ing Rudolf KAWALLA
Organisation: TU BA
Direct line: +(49) 3731/39 24 79
Direct fax: +(49) 3731/39 36 56
TECHNICAL UNIVERSITY BERGAKADEMIE
FREIBERG, INSTITUT FÜR METALLFORMUNG
Department: Institute
Address: Bernhard-von-Cotta Strasse, 4
e-mail: kawalla@imf.tu-freiberg.de
DE-09596 FREIBERG
Contract N°
RFSR-CT-2006-00011
Reference N°
TGS4.04/06
1.592.905
955.744
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Using asymmetrical rolling for increased production and improved material properties
Acronym ASYMMROLL
:
This project will investigate the possibilities to use asymmetrical rolling in existing mills in order to decrease loads, increase reductions and improve strip
geometry and material properties. The project involves tests in pilot and industrial mills, FE-modelling and metallurgical analysis. Models for rolling forces,
rolling torques and long bow will be developed since it is needed for the pass schedule design.
Different asymmetrical designs will be investigated such as single/twin drive, different sized work rolls.
The level of shear for different geometries will be investigated in laboratory scale. Microstructure will be evaluated both for laboratory test and full scale
trials.
State of progress:
Partners
(CO)
MEFOS
Responsible: PhD Annika NILSSON
Organisation: MEFOS
Direct line: +(46) 920/20 19 70
Direct fax: +(46) 920/20 50 59
INSTITUTE AB
e-mail: annika.nilsson@mefos.se
SE-97125 LULEÅ
(P)
CSM
Responsible: Dr. Ilaria SALVATORI
Organisation: CSM
Direct line: +(39) 06/505 57 81
Direct fax: +(39) 06/505 54 61
e-mail: i.salvatori@c-s-m.it
IT-00128
(P)
VDEH-BFI
Responsible: Mr Roger LATHE
Direct line: +(49) 211/6707 204
Direct fax: +(49) 211/6707 205
e-mail: roger.lathe@bfi.de
123
(P)
TU BA
Organisation: TU BA
Direct line: +(49) 3731/39 24 79
Direct fax: +(49) 3731/39 36 56
DE-09596 FREIBERG
(P)
CRM
Responsible: Mr Jurgen MALBRANCKE
Organisation: CRM
Direct line: +(32) 9/264 57 99
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: malbrancke@agt0.ugent.be
Contract N°
RFSR-CT-2006-00012
Reference N°
TGS4.05/06
1.306.438
783.863
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Laser treatment of profiled rolls
Acronym LASERHARD
:
A laser heat source can melt a surface layer, up to 1 mm in depth, typically less than the abrasive wear depth for a rolling campaign. Due to the rapid
cooling a significant increase in the hardness is produced without affecting the substrate metallurgy. A protective layer can be so applied on selected areas
of a roll as part of the dressing procedure. This project would develop adequate laser based strategies to treat profiled rolls, determining the optimum
applications (weld depths, speeds and areas) and applicable roll grades, and additionally, determine the efficiency of the process in technical and
economical terms.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Chris HEASON
Direct line: +(44) 1709/825 065
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: chris.heason@corusgroup.com
Rotherham
(P)
AIMEN
Responsible: Dr. Alberto FERNANDEZ
Organisation: AIMEN
Direct line: +(34) 986/344 000
Direct fax: +(34) 986/337 302
ASOCIACION DE INVESTIGACION
METALURGICA DEL NOROESTE - AIMEN
Address: Calle Relva 27A
e-mail: afernandez@aimen.es
Torneiros
ES-36410 PORRIÑO
(P)
SIDERURGICA ANON
Responsible: Mr José R. NAYA RODRIGUEZ
Organisation: SIDERURGICA ANON
Direct line: +(34) 981/01 26 20
Direct fax: +(34) 981/64 30 23
SIDERÚRGICA Anon SA
e-mail: jrnaya@grupoanon.com
Address: Lugar de Lendo, s/n
ES-15145 LARACHA (A CORUÑA)
124
(P)
ISQ
Responsible: Dr Helena GOUVEIA
Direct line: +(351) 21/422 81 96
Organisation: ISQ
Direct fax: +(351) 21/422 81 26
INSTITUTO DE SOLDADURA E QUALIDADE
e-mail: hngouveia@isq.pt
Department: Production Technologies
Address: Av. Prof. Cavaco Silva N° 33
Talaide
PT-2740 120 PORTO SALVO-OEIRAS
(P)
IC
Responsible: Eng. Alberto TREMEA
Direct line: +(39) 030/370 37 59
Organisation: IC
Fax: +(39) 030/37 14 214
INNSE CILINDRI SRL
e-mail: alberto.tremea@innsecilindri.com
Address: Via Attilio Franchi 20
IT-25127 BRESCIA
(P)
UNIV TRENTO
Responsible: Prof. Massimo PELLIZZARI
Organisation: UNITN
Direct line: +(39) 0461/882 449
Direct fax: +(39) 0461/881 977
UNIVERSITA DEGLI STUDI DI TRENTO - Dpt of
Mat.Eng. and Ind Tech.
Address: Via Mesiano 77
e-mail: massimo.pellizzari@ing.unitn.it
IT-38050 TRENTO
(P)
SIDENOR I+D
Direct line: +(34) 94/487 18 96
Direct fax: +(34) 94/487 18 44
S.A.
(P)
VDEH-BFI
Organisation: VDEH
Direct line: +(49) 211/6707 226
Direct fax: +(49) 211/6707 923 226
STAHLINSTITUT VDEh
Contract N°
RFSR-CT-2006-00014
Reference N°
TGS4.06/06
1.653.143
991.887
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: New cooling techniques for enhanced roll bite lubrication during cold rolling of high strength steels and thin packaging
steels
Acronym OPTCOOLUB
:
The current trend of cold tandem mills of combining higher rolling speed, larger reduction, harder steel grades significantly increases problems of cooling
and lubrication degradation.
This project aims at improving cooling performances to make better lubricant properties in cold rolling. Physical models associated to tests of new cooling
techniques (combination of different types or arrangements of nozzles, high turbulence cooling techniques) will be derived in practical recommendations to
improve cold mills productivity and product quality.
The expected benefits for the European steel industry are estimated to 15M €/year through the possibility to achieve higher rolling speeds and reductions, to
decrease oil consumption (by 5%) and oil cost (by 15%), and to reduce water consumption and recycled coolant quantities (positive environmental aspect).
State of progress:
Partners
125
(CO)
ARCELOR RESEARCH
Responsible: Dr. Nicolas LEGRAND
Direct line: +(33) 3/87 70 42 61
Direct fax: +(33) 3/87 70 41 01
e-mail: nicolas.legrand@arcelormittal.com
(P)
LECHLER
Responsible: Mr Jochen MUNZ
Organisation: LECHLER
Direct line: +(49) 7123/962 419
Direct fax: +(49) 7123/962 333
LECHLER GMBH
e-mail: mujo@lechler.de
Department: Systems/metallurgical Division
Address: Ulmer Strasse 128
DE-72555 METZINGEN
(P)
VOEST-ALPINE
Responsible: Dr. Dieter PAESOLD
Direct line: +(43) 732/6585 88 61
Direct fax: +(43) 732/6980 88 61
e-mail: dieter.paesold@voestalpine.com
AT-4020 LINZ
(P)
BUT
Responsible: Dr Miroslav RAUDENSKY
Organisation: BUT
Direct line: +(420) 541/143 274
Direct fax: +(420) 541/142 224
BRNO UNIVERSITY OF TECHNOLOGY
e-mail: raudensky@fme.vutbr.cz
Department: Heat Transfer and Fluid Flow Laboratory
Address: Technicka 2896/2
CZ-61669 BRNO
(P)
ARCELOR ESPANA
Responsible: Mr Guillermo VECINO
Direct line: +(34) 98/512 64 39
Direct fax: +(34) 98/512 63 75
e-mail: guillermo.vecino@arcelormittal.com
Department: I&R
(P)
CNRS
Responsible: Mr Pierre MONTMITONNET
Organisation: CEMEF
Direct line: +(33) 4/93 95 74 14
Direct fax: +(33) 4/93 65 43 04
CENTRE DE MISE EN FORME DES MATERIAUX
e-mail: pierre.montmitonnet@ensmp.fr
Address: 207, Rue Claude Daunesse
FR-06904 SOPHIA ANTIPOLIS
(P)
CRM
Responsible: Mr Hugo UIJTDEBROEKS
Organisation: CRM
Direct line: +(32) 9/264 57 67
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: uijt@rdmetal.ulg.ac.be
126
Contract N°
RFSR-CT-2007-00014
Reference N°
TGS4.01/07
1.194.543
716.726
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Optimisation of finishing processes for eliminating rectification of plate and section products
Acronym OPTIFIN
:
The project is aimed at an improved understanding of the evolution of microstructure, material properties, internal stress/strain fields, flatness and
squareness, during hot rectification and cooling of plates and sections, establishing the sensitivities of product condition at entry to cold rectification. Hot
rectification and cooling processes will be optimised to achieve required mechanical and dimensional properties, thereby reducing or eliminating the need
for cold rectification. Warm rectification will also be considered as a mean to increase throughput and reduce mechanical work on finished products.
Regime maps will be developed covering key products and grades, and selectively tested in industrial conditions.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr Didier FARRUGIA
Direct line: +(44) 1709/825 117
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: didier.farrugia@corusgroup.com
Rotherham
(P)
CEIT
Responsible: Dr Isabel GUTIERREZ SANZ
Organisation: CEIT
Direct line: +(34) 943/21 28 00
Direct fax: +(34) 943/21 30 76
CENTRO DE ESTUDIOS E INVESTIGACIONES
TECNICAS DE GIPUZKOA
Department: Thermomechanical Treatments Units
Address: Po. de Manuel Lardizábal, 15
e-mail: igutierrez@ceit.es
Barrio de Ibaeta
ES-20009 SAN SEBASTIAN
(P)
RIVA
Responsible: Mr Marco PIANEZZOLA
Direct line: +(39) 0174/718 111
Fax: +(39) 0174/77 251
RIVA ACCIAIO
e-mail: gleeble.lesegno@rivagroup.com
Address: Strada Statale 28 Nord
IT-12076 LESEGNO
(P)
AGH
Responsible: Prof. Maciej PIETRZYK
Organisation: AGH
Direct line: +(48) 12/617 29 21
Direct fax: +(48) 12/617 29 21
AKADEMIA GORNICZO-HUTNICZA IM.
STANISLAWA STASZICA W KRAKOWIE AGH
Address: Al. Adam Mickiewicza 30
e-mail: pietrzyk@metal.agh.edu.pl
PL-30059 KRAKOW
127
Contract N°
RFSR-CT-2007-00015
Reference N°
TGS4.02/07
1.808.963 1.085.378
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Minimised yield losses by innovative integrated edge-drop, width and shape control based on soft-sensor technology and
new actuators in cold rolling mills
Acronym EDGECONTROL
:
This project will bring European steel producers a major step forward to delivering near rectangular cold strips to their final customers and thus minimising
their own yield losses by avoiding/reducing side trimming and strip breaks on critical and highly demanding products. Potential actuators to control edge
drop and width in cold rolling will be evaluated combining innovative (i.e. portable and integrated) measurement systems on industrial mills, (3D modelbased) soft-sensors for online estimation, and model predictive control. The expected benefits for the European steel industry are estimated to an average of
20 M€/year1 through the possibility to produce strips with tight geometrical tolerances and to reduce yield, with positive environmental aspect.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr Mohieddine JELALI
Direct line: +(49) 211/6707 218
Direct fax: +(49) 211/6707 923
e-mail: mohieddine.jelali@bfi.de
Department: Vice Head of Department
(P)
ARCELOR EHS
Responsible: Dr.-Ing. Jürgen BATHELT
Direct line: +(49) 3364/372 272
Direct fax: +(49) 3364/375 872
e-mail: juergen.bathelt@arcelormittal.com
(P)
MEFOS
Responsible: MSc Patrik SIDESTAM
Organisation: MEFOS
Direct line: +(46) 920/20 19 90
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: patrik.sidestam@mefos.se
SE-97125 LULEÅ
(P)
ARCELOR RESEARCH
Responsible: Dr. Nicolas LEGRAND
Direct line: +(33) 3/87 70 42 61
Direct fax: +(33) 3/87 70 41 01
e-mail: nicolas.legrand@arcelormittal.com
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 64 39
Direct fax: +(34) 98/512 63 75
Department: I&R
128
Contract N°
RFSR-CT-2007-00016
Reference N°
TGS4.03/07
1.287.748
772.649
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Development of an innovative hybrid procedure for combining tension-levelling and skin pass rolling
Acronym Hyprocom
:
Main objective is the development of an innovative strip finishing procedure by combining tension levelling and skin pass rolling into one production step
and thus to shorten the process chain. During former RFCS-projects [R1, R2] it could be proved that the mechanical characteristics of strip material mainly
adjusted during the skin pass rolling process are possible to be achieved as well during a pure tension levelling process by variation of applied tension and
bending load. The realisation of the desired surface texture requires an additional superposed deformation under pressure introduced simultaneously in
those strip sections where the yield strength of the material already is met by the applied tension-bending procedure. Using the new facility it will be
possible to adjust material mechanical and surface roughness properties independently. Thus the new technique fundamentally contributes to the common
development to require steel grades with highest surface quality and simultaneous highest available deformation resources.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Volker DIEGELMANN
Direct line: +(49) 211/6707-348
Direct fax: +(49) 211/6707 923
e-mail: volker.diegelmann@bfi.de
Department: R&D
(P)
BILSTEIN
Responsible: Dipl -Ing Gerald Otto ZWICKEL
Organisation: BILSTEIN
Direct line: +(49) 2334/82 2300
Direct fax: +(49) 2334/82 2080
BILSTEIN GmbH & Co KG
e-mail: gerald.zwickel@bilstein-kaltband.de
Address: Im Weinhof
DE-58119 HAGEN
(P)
ISQ
Organisation: ISQ
Direct line: +(351) 21/422 81 96
Direct fax: +(351) 21/422 81 26
Talaide
(P)
SUNDWIG
Responsible: Dipl -Ing Udo WEIRAUCH
Organisation: SUNDWIG
Direct line: +(49) 2372/54 436
Direct fax: +(49) 2372/54 156
SUNDWIG GmbH
e-mail: udo.weirauch@sundwig.de
Address: Stephanopeler Strasse, 22
DE-58675 HEMER
(P)
UNIV RIOJA
Responsible: Dr Eliseo VERGARA
Direct line: +(34) 941/299 232
Direct fax: +(34) 941/299 794
e-mail: eliseo.vergara@dim.unirioja.es
Address: Avenida de la Paz, 107
ES-26004 LOGROÑO
129
Contract N°
RFSP-CT-2008-00009
Reference N°
TGS4.01/08
1.049.431
419.772
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Industrial implementation of a selective roll cooling system for big rolls with multiple groves in long product rolling based
on advanced cooling technology
Acronym SELECTIVEROLLCOOLING
:
The general aim of this pilot and demonstration program is to demonstrate that the cooling of big grooved work rolls can strongly be improved by the use
of advanced cooling technology and a selective cooling strategy.
The main objectives are to improve the performance of big grooved rolls and to reduce the required coolant flow and pressure. By this to increase the
production rate and to reduce energy cost, raw materials and recycled flow rate.
The new selective cooling systems will be based on preliminary trials, performed in the framework of the RFCS research program “Effective work roll
cooling”[1].
State of progress:
Partners
(CO)
CRM
Responsible: Mr Hugo UIJTDEBROEKS
Organisation: CRM
Direct line: +(32) 9/264 57 67
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: uijt@rdmetal.ulg.ac.be
(P)
CORUS UK
Responsible: Dr Christian ONISA
Direct line: +(44) 1709/823 313
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: christian.onisa@corusgroup.com
Rotherham
(P)
ARCELOR PROFIL
Responsible: Mr Antoine SNYERS
Direct line: +(352) 5313 2161
Direct fax: +(352) 547 964
S.A.
e-mail: antoine.snyers@arcelormittal.com
Contract N°
RFSP-CT-2008-00010
Reference N°
TGS4.02/08
2.552.900 1.021.160
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Acidfree strip descaling process
Acronym AFRESCA
:
Scale, mainly formed during hot processing, must be removed before further processing. Up to now the necessary pickling process based on the use of
acids and chemical treatment is timeconsuming and often creates a bottleneck between hot and cold rolling. Further on the use of pickling liquids is highly
dangerous for people working in the plant and the environment.
Combining different technologies as measurement of scale thickness, high-dynamic control of scale-breaking, monitoring of scale properties and
simultaneously controlling mechanical descaling using abrasives in closed loop leads to acid-free de-scaling of strip with sustainable preserving of people,
plant and the environment.
State of progress:
Partners
130
(CO)
WS
Responsible: DI Bernhard KONRAD
Direct line: +(43) 50910 391
Organisation: WS
Direct fax: +(43) 50910 395
WUPPERMANN ENGINEEIRING GmbH
e-mail: bernhard.konrad@wuppermann.com
Department: Product & Process Development
Address: Gussstahlwerkstrasse, 23
AT-8750 JUDENBURG
(P)
VDEH-BFI
Responsible: Dipl -Ing Frank GORGELS
Direct line: +(49) 6707/340
Direct fax: +(49) 6707/923 340
e-mail: frank.gorgels@bfi.de
Department: R&D
(P)
IMS
Responsible: Dipl -Ing Rainer FACKERT
Organisation: IMS
Direct line: +(49) 2056/975 116
Direct fax: +(49) 2056/975 140
IMS Messsysteme GmbH
e-mail: rainer.fackert@ims-gmbh.de
Address: Dieselstraße 55
DE-42579 HEILIGENHAUS
(P)
CRM
Responsible: Mrs Geneviève MOREAS
Direct line: +(32) 4/254 63 06
Organisation: CRM
Direct fax: +(32) 4/254 64 64
ASBL
e-mail: moreas@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
Contract N°
RFSR-CT-2008-00011
Reference N°
TGS4.03/08
1.464.064
878.439
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Increase of cold rolling performance by new lubricant and innovative work roll concepts
Acronym LUBWORK
:
New approaches for work roll materials, surface treatment and coatings, new emulsions and additives enables increased productivity and surface
cleanliness in steel cold rolling. Laboratory, pilot tests and finally first examinations nearing industrial rolling process will prove applicability of new
technologies and decreases risks associated with industrial testing. Examination on impact on strip surface and surface cleanliness as well as consequences
for care and control of emulsions circuits will be included in this research work. The platform of positive results already achieved for aluminium hot rolling
with oil free emulsions will benefit well on the steel research work.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl Ing Tilo REICHARDT
Direct line: +(49) 211/6707 308
Direct fax: +(49) 211/6707 377
e-mail: tilo.reichardt@bfi.de
Department: R&D
131
(P)
VOEST-ALPINE
Responsible: Dr Hubert DUCHACZEK
Direct line: +(43) 53304/15 75733
Direct fax: +(43) 50304-15
e-mail: hubert.duchaczek@voestalpine.com
Department: Dept. B4P-4
AT-4031 LINZ
(P)
LUXCONTROL
Responsible: Dr Mohammed CHTAIB
Direct line: +(352) 54 77 11-254
Organisation: LUXCONTROL
Fax: +(352) 54 79 30
LUXCONTROL SA
e-mail: chtaib@luxcontrol.com
Address: Avenue des Terres Rouges, 1
(P)
TKS
Responsible: Dr Martin RAULF
Organisation: TKS
Direct line: +(49) 203/52 44944
Direct fax: +(49) 231/844 67 17
e-mail: martin.raulf@thyssenkrupp.com
DE-47161 DUISBURG
(P)
HAD
Responsible: Dr Gerhard KUDERMANN
Organisation: HAD
Direct line: +(49) 228/552 23 68
Direct fax: +(49) 228/552 24 52
HYDRO ALUMINIUM DEUTSCHLAND GmbH
e-mail: gerhard.kudermann@hydro.com
Department: SC Chemistry and Surfaces
Address: Georg-von-Boeselager-straße 25
DE-53117 BONN
(P)
CRM
Responsible: Mrs Diana ESPINOSA
Organisation: CRM
Direct line: +(32) 9/264 57 98
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: espinosa@agt0.ugent.be
(P59)
BE-4000 LIEGE
(P)
YKI
Responsible: Dr Karin PERSSON
Organisation: YKI
Direct line: +(46) 8/5010 60 72
Direct fax: +(46) 8/20 89 98
YKI, YTKEMISKA INSTITUTET AB
e-mail: karin.persson@surfchem.kth.se
Department: Tribology
SE-114 86 STOCKHOLM
132
Contract N°
RFSR-CT-2008-00012
Reference N°
TGS4.04/08
1.423.894
854.336
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Advanced method to improve work roll life time and surface quality of hot rolled strip by new coupled oil free lubrication
and chilling
Acronym CHILLUB
:
CHILLUB will gain detailed knowledge of heat transfer mechanism of strip surface before and the mechanism of friction and roll fatigue in the roll bite
when applying new coupled oil free lubricant (water soluble) with strip cooling (chilling) during hot rolling.
Research work is primarily related to work roll deterioration and strip surface quality.
Secondary the suppressing of scale formation is examined.
Objectives of the investigations are:
- Increase work roll life time
- Improving strip surface quality
- Enlarged process window when rolling high strength steels.
Results are integrated into set-up and control models revealing into an industrial prototype.
State of progress:
Partners
(CO)
CORUS NL
Responsible: Mr Harry VAN STEDEN
Direct line: +(31) 251/495 214
Direct fax: +(31) 251/470 235
TECHNOLOGY CENTRE
e-mail: harry.van-steden@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
CRM
Responsible: Mr Bart VERVAET
Organisation: CRM
Direct line: +(32) 9/264 57 74
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: vervaet@agt0.ugent.be
(P)
VDEH-BFI
Responsible: Dipl Ing Tilo REICHARDT
Direct line: +(49) 211/6707 308
Direct fax: +(49) 211/6707 377
e-mail: tilo.reichardt@bfi.de
Department: R&D
(P)
TKS
Responsible: Dr rer nat Horst W. TAMLER
Organisation: TKS
Direct line: +(49) 203/52 248 74
Direct fax: +(49) 203/52 221 09
e-mail: horst.tamler@thyssenkrupp.com
Department: Zentralabteilung Forschung und Entwicklung
DE-47161 DUISBURG
(P)
BUT
Responsible: Dr Miroslav RAUDENSKY
Organisation: BUT
Direct line: +(420) 541/143 274
Direct fax: +(420) 541/142 224
BRNO UNIVERSITY OF TECHNOLOGY
e-mail: raudensky@fme.vutbr.cz
Department: Heat Transfer and Fluid Flow Laboratory
Address: Technicka 2896/2
CZ-61669 BRNO
133
Contract N°
RFSR-CT-2008-00013
Reference N°
TGS4.05/08
2.273.616 1.364.169
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2012 30/06/2012
Title: Work rolls in the roughing mills: roll grade and process optimisation to save energy and roll cost of use
Acronym WINROLLS
:
This project objective is to improve the robustness of the rolling process in the roughing mill by decreasing the roll consumption and increasing the process
reliability. A first axis will be the observation of the working roll during its lifetime and the comparison of observations with models to understand the
degradation mechanisms. Then, the influence of process parameters such as roll cooling and roll preparation before rolling will be investigated to define the
optimized rolling
conditions. The final axis will be the development of an optimized new work roll grade based on the specifications obtained from the other axis.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mrs Eliette MATHEY
Direct line: +(33) 3/87 70 42 68
Direct fax: +(33) 3/87 70 41 01
e-mail: eliette.mathey@arcelormittal.com
(P)
AKERS
Responsible: Ir Claude GASPARD
Direct line: +(32) 4/22 97 240
Organisation: AKERS
Direct fax: +(32) 4/22 97 241
AKERS BELGIUM S.A.
e-mail: claude.gaspard@akersrolls.com
Address: Rue de la Barrière, 40
BE-4100 SERAING
(P)
CRM
Responsible: Mr Jurgen MALBRANCKE
Organisation: CRM
Direct line: +(32) 9/264 57 99
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: malbrancke@agt0.ugent.be
Contract N°
RFSR-CT-2008-00014
Reference N°
TGS4.06/08
1.313.723
788.234
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Improvement of the internal wall surface of seamlesss tubes by optimisation and anticipating management of the mandrel
bar operation and supervision of the internal tool process
Acronym OPTITUBE
:
This project aims to optimise the internal wall surface of seamless tubes. Systems to measure internal tool condition and process forces will provide a
database for correlation analysis and on-line prediction-based processing and anticipating maintenance. Hybrid correlation & Finite Element Models will
predict the internal wall surface quality based on internal tool condition evolution and tool process parameters. New wear resistant tool materials/coatings
and enhanced process lubrication will be introduced to optimise internal tool surface and process parameters. A supervision system will integrate the online information and an anticipating strategy to handle internal tool processes and maintenance
proposals e. g. of the time to replace the tool. The system will be demonstrated at a push bench tube line of Benteler.
State of progress:
Partners
134
(CO)
VDEH-BFI
Responsible: Mr Hagen KRAMBEER
Direct line: +(49) 211/6707 370
Direct fax: +(49) 211/6707 310
e-mail: hagen.krambeer@bfi.de
(P)
COMTES
Responsible: Ph.D. Michal ZEMKO
Direct line: +(420) 377/429 176
Organisation: COMTES
Direct fax: +(420) 377/422 224
COMTES FHT s.r.o.
e-mail: mzemko@comtesfht.cz
Department: Numerical Simulation
Address: Lobezska E981
CZ-326 00 PLZEN
(P)
BSR
Responsible: Mr Leonhard ROSE
Direct line: +(49) 5254/81 4930
Organisation: BSR
Direct fax: +(49) 5254/81 4909
BENTELER STAHL/ROHR GmbH
e-mail: leo.rose@benteler.de
Address: Residenzstrasse 1
DE-33104 PADERBORN
(P)
ROVALMA
Responsible: Eng. Isaac VALLS ANGLES
Organisation: ROVALMA
Direct line: +(34) 93/73 62380
Direct fax: +(34) 93/78 55 453
ROVALMA SA
e-mail: isaac@rovalma.com
Address: Apollo n°51
ES-08228 TERRASSA
Contract N°
RFSR-CT-2008-00015
Reference N°
TGS4.07/08
1.879.635 1.127.781
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Global adaptive model for prediction, characterization and damping of vibrations in hot strip mills
Acronym CHATTER
:
This project proposes a novel global approach to solve vibrations problems during hot rolling of strip, detecting and eliminating conditions that drive to
their appearance and developing control strategies for their effective damping.
The main approach is to develop models that evaluate the probability of appearance of vibrations at any stand according to rolling conditions foreseen by
process models for the next bar to enter the mill. If probability is high, process models will be told to generate a different mill set up that changes the
conditions of those stands. Additional measure and damping strategies will complete the strategy.
State of progress:
Partners
(CO)
CETTO
Organisation: CETTO
Direct line: +(49) 2102/94 0224
Direct fax: +(49) 2102/94 02 37
DE-40878 RATINGEN
(P)
TKS
Responsible: Dipl -Phys Jürgen DREVERMANN
Organisation: TKS
Direct line: +(49) 234/919 27 50
Direct fax: +(49) 234/919 54 70
e-mail: juergen.drevermann@thyssenkrupp.com
Address: 708 WBW-BO-E/E-Messtechnik
DE- 44782 BOCHUM
135
(P)
TU CLAUSTHAL
Responsible: Prof Dr -Ing Hans-Peter BECK
Organisation: TUC
Direct line: +(49) 5323/72 39 01
Direct fax: +(49) 5323/71 35 00
e-mail: vizepraesident.f@tu-clausthal.de
Address: Robert-Koch-Strasse 42
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
UNIV OVIEDO
Responsible: Dr Ignacio ALVAREZ GARCIA
Direct line: +(34) 985/182 375
Direct fax: +(34) 985/182 068
UNIVERSIDAD DE OVIEDO - INGENIERIA DE
SISTEMAS Y AUTOMATICA
Address: Campus de Viesques s/n (Edificio n° 2.2 Planta)
e-mail: ialvarez@isa.uniovi.es
ES-33204 GIJON
(P)
SSSA
Direct line: +(39) 050/883 079
Organisation: SSSA
Direct fax: +(39) 050/883 333
SANT'ANNA
Contract N°
RFSR-CT-2008-00016
Reference N°
TGS4.08/08
2.619.191 1.571.515
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Oxidation Management in hot rolling processes
Acronym OxMaPro
:
The European Steel Platform (ESTEP) has called for determined research and development activity into the area of ‘scale-free’ processing and is
specifically recommending this project. OXMAPRO aims to develop novel integrated routes involving the use of coatings in reheating and hot rolling, new
methods of scale/coating detection and process control and optimisation of descaling practices to produce the best surface quality for each steel. These new
concepts and processes will be highly transferable across steel grades. The project will focus on strip, rail, rod, bar and plate for yellow goods. It will
involve laboratory,
pilot plant and industrial plant trials.
State of progress:
Partners
(CO)
CORUS UK
Direct line: +(44) 1642/382 097
Direct fax: +(44) 1642/457 919
CENTRE
Rotherham
136
(P)
ARCELOR RESEARCH
Responsible: Ir Cécile PESCI
Direct line: +(33) 3/87 70 40 60
Direct fax: +(33) 3/87 70 47 13
e-mail: cecile.pesci@arcelormittal.com
(P)
VDEH-BFI
Responsible: Dr -Ing Rolf KLIMA
Direct line: +(49) 211/670 72 84
Direct fax: +(49) 211/670 72 05
e-mail: rolf.klima@bfi.de
Department: Energiewirtschaft und Wärmetechnik
(P)
CRM
Responsible: Mrs Isabelle TOLLENEER
Organisation: CRM
Direct line: +(32) 9/2645 759
Direct fax: +(32) 9/2645 834
ASBL
e-mail: tolleneer@agt0.ugent.be
(P)
SIDENOR I+D
Direct line: +(34) 94/487 18 96
Direct fax: +(34) 94/487 18 44
S.A.
(P)
HHO
Responsible: Dipl -Ing Holger ADLUNG
Organisation: HHO
Direct line: +(49) 2334/91 2338
Direct fax: +(49) 2334/91 162338
HOESCH HOHENLIMBURG GmbH
e-mail: holger.adlung@thyssenkrupp.com
Address: Langenkampstrasse 14
DE-58119 HAGEN
137
Technical Group TGS5 :"Finishing and coating"
Contract N°
RFSR-CT-2005-00021
Reference N°
TGS5.1/05
1.652.096
991.258
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Optimised productivity and quality of pickling by on-line control of pickled surface
Acronym HIGH-PICK
:
To attain a complete elimination of the oxide from the steel surface is an obvious quality request of pickling. However the overpickling i.e. the attack of
iron by the acid solution is also detrimental in terms of productivity and quality. So reaching the exact “just pickled” state is an important issue. That is
precisely the objective of this project.
It will have a multidisciplinary approach:
- Development / adaptation of a number of sensors: to monitor the strip surface, follow the process and assess the aggressiveness of the acid solution
- On-line tests in several industrial lines
- Statistical analysis of overall pickling phenomena.
All the data will be used to define the conditions assuring optimised operation i.e. full pickling and no or minimal overpickling. Finally the benefits will be
analysed and the transfer conditions will be prepared.
State of progress:
Partners
(CO)
CRM
Responsible: Mr Jean CRAHAY
Organisation: CRM
Direct line: +(32) 4/254 62 30
Direct fax: +(32) 4/254 62 62
ASBL
Department: Finishing and Coating
e-mail: crahay@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
ARCELOR RESEARCH
Responsible: Dr. Christian ALLELY
Direct line: +(33) 3/87 70 47 08
Direct fax: +(33) 3/87 70 47 11
e-mail: christian.allely@arcelormittal.com
(P)
ILVA
Responsible: Eng. Daniele AGAZZANI
Organisation: ILVA
Direct line: +(39) 010/607 99 69
Direct fax: +(39) 010/607 99 53
ILVA SpA
e-mail: laf.genova@rivagroup.com
Address: Via Pionieri e Aviatori d'Italia 8
IT-16154 GENOVA
(P)
SSSA
Organisation: SSSA
Direct line: +(39) 050/883 079
Direct fax: +(39) 050/883 333
SANT'ANNA
(P)
VDEH-BFI
Responsible: Dipl -Ing Holger SCHMERMBECK
Direct line: +(49) 211/6707 539
Direct fax: +(49) 211/6707 205
e-mail: holger.schmermbeck@bfi.de
Department: R&D
138
Contract N°
RFSR-CT-2005-00022
Reference N°
TGS5.2/05
1.952.127 1.171.277
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: New wiping techniques to produce efficiently the suitable coating layers at high speed in the hot dip galvanising process
Acronym Advanced Wiping
:
The project deals with the control of the coating weight in the hot dip coating process. The current wiping technology used the gas knife system is limiting
with regards to production of low coating weights and the line speeds at which they can be achieved.
The development of new wiping techniques should enable a high line speed with a high flexibility on the final coating thickness. Hence, to overcome the
current bottleneck of the galvanising line and so to pave the way for increased productivity, to extend possible coating range and high mastering of the
production cost.
State of progress:
Partners
(CO)
CRM
Responsible: Mr Olivier BREGAND
Organisation: CRM
Direct line: +(32) 4/254 64 26
Direct fax: +(32) 4/254 62 62
ASBL
e-mail: bregand@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
ARCELOR RESEARCH
Responsible: Dr. Marc ANDERHUBER
Direct line: +(33) 3/87 70 43 97
Direct fax: +(33) 3/87 70 41 04
e-mail: marc.anderhuber@arcelormittal.com
(P)
CORUS NL
Responsible: Mr Nico NOORT
Direct line: +(31) 251/497 397
Direct fax: +(31) 251/470 407
TECHNOLOGY CENTRE
Department: CRDT PPA CPR MCS / 3F22 1-330
e-mail: nico.noort@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
ABB AUTOMATION
Responsible: Mr Jan Erik ERIKSSON
Organisation: ABB
Direct line: +(46) 21/340 930
Direct fax: +(46) 21/148 327
ABB INDUSTRIES AB
e-mail: jan-erik.a.eriksson@se.abb.com
Department: Development, Minerals
Address: Fredholmsgatan 22
SE-72183 VÄSTERAS
(P)
VDEH-BFI
Responsible: Dr.-Ing. Walter UNGERER
Direct line: +(49) 211/670 72 42
Direct fax: +(49) 211/6707 310
e-mail: walter.ungerer@bfi.de
139
Contract N°
RFSR-CT-2005-00023
Reference N°
TGS5.3/05
1.296.030
777.618
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Space efficient curing methods and simulation-aided coating engineering for extending lifetime of aesthetic coil coatings
Acronym SPACE
:
This proposal is focused on steel use and the possibilities of space efficient curing methods and structure – property relationships as tools for development
of complex coil coatings for exterior architectural applications.
The desired properties are new aesthetic surfaces, anti-graffiti properties, anti-bacterial properties, improved scratch resistance and dual-cure systems for
improved combination of hardness and formability.
Overall objectives are:
• To define working range for each curing method and the corresponding coating systems (UV, IR, NIR and thermal curing as reference).
• To work out unique performance profiles specific for different polymer and curing chemistries.
• To develop 3-layer coil coatings
State of progress:
Partners
(CO)
TOP ANALYTICA
Responsible: Dr. Bengt-Johan SKRIFVARS
Telephone: +(358) 2/282 77 81
Organisation: TOP ANALYTICA
Fax: +(358) 2/282 77 85
TOP ANALYTICA OY AB
e-mail: bengt-johan.skrifvars@topanalytica.com
Address: Oldmill, Ruukinkatu 4
FI-20540 TURKU
(P)
MPIE
Responsible: Dr Guido GRUNDMEIER
Organisation: MPIE
Direct line: +(49) 211/6792 290
Direct fax: +(49) 211/6792 218
MAX-PLANCK-INSTITUT FÜR
EISENFORSCHUNG GmbH
Address: Max-Planck-Strasse 1
e-mail: grundmeier@mpie.de
(P)
RUUKKI
Responsible: Mr Mika HAUTALA
Direct line: +(358) 20/592 56 11
Direct fax: +(358) 20/592 50 75
RUUKKI ENGINEERING
e-mail: mika.hautala@ruukki.com
Department: Product Development, Coil Coating
Address: Harvialantie 420
FI-13300 HÄMEENLINNA
(P)
SSAB
Responsible: Dr. Per-Erik SUNDELL
Organisation: SSAB
Direct line: +(46) 243/717 44
Direct fax: +(46) 243/716 70
SSAB TUNNPLÅT AB
e-mail: per-erik.sundell@ssab.com
Address:
SE-78184 BORLÄNGE
(P)
CYTEC
Responsible: Dr. Marc HEYLEN
Organisation: SURFACE SPEC.
Direct line: +(32) 2/334 57 85
Direct fax: +(32) 2/334 59 95
SURFACE SPECIALITIES SA
e-mail: marc.heylen@cytec.com
Department: TSD
Address: Allée de la Recherche 60
BE-1070 ANDERLECHT
140
(P)
VOEST-ALPINE
Responsible: Dr. Bernhard STRAUß
Direct line: +(43) 732/6585 6989
Direct fax: +(43) 732/6980 6004
e-mail: bernhard.strauss@voestalpine.com
AT-4020 LINZ
Contract N°
RFSR-CT-2005-00024
Reference N°
TGS5.4/05
1.693.189 1.015.914
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Development and evaluation of coatings and surface conditions on steel for antibacterial and easy to clean properties
Acronym DECOBIOF
:
Microbial growth in steel components may cause corrosion, odour, staining, and in certain cases serious healthy problems.
Today, there is a special interest in what it is called “hygienic surfaces” with refers not only to a surface that provides anti-microbial activity, but also to a
surface which looks clean or even with a self cleaning behaviour.
These properties can be achieved with specific coatings or via surface substrate modification.
The development and evaluation of hygienic surfaces on steel for antibacterial and easy to clean properties is the main objective of this proposal.
State of progress:
Partners
(CO)
INASMET
Responsible: Ms Virginia MADINA
Direct line: +(34) 943/00 37 00
Direct fax: +(34) 943/00 38 00
Fundación INASMET
e-mail: vmadina@inasmet.es
(P)
CORUS UK
Responsible: Dr. Stuart READ
Direct line: +(44) 1709/825 293
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: stuart.read@corusgroup.com
Rotherham
(P)
MPIE
Organisation: MPIE
Direct line: +(49) 211/6792 290
Direct fax: +(49) 211/6792 218
EISENFORSCHUNG GmbH
(P)
OCAS
Responsible: Dr. Swapan Kumar GHOSH
Organisation: OCAS
Direct line: +(32) 9/345 12 38
Direct fax: +(32) 9/345 12 04
ONDERZOEKSCENTRUM VOOR
AANWENDING VAN STAAL N.V.
Department: Surface functionalisation department
Address: John Kennedylaan 3
e-mail: swapankumar.ghosh@arcelormittal.com
BE-9060 ZELZATE
141
(P)
KIMAB
Responsible: Mr Dan JACOBSSON
Direct line: +(46) 8/440 48 44
Organisation: KIMAB
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: dan.jacobsson@swerea.se
SE-11428 STOCKHOLM
(P)
ACERINOX
Responsible: Dr. Maria Victoria MATRES
Organisation: ACERINOX
Direct line: +(34) 956/62 93 83
Direct fax: +(34) 956/62 94 28
ACERINOX SA
e-mail: vmatress@acxgroup.com
Department: Corrosion Lab
Address: Villa de Palmones
ES-11379 LOS BARRIOS (CADIZ)
(P)
CSM
Responsible: Dr.ssa Maria Grazia SERRA
Organisation: CSM
Direct line: +(39) 06/505 53 03
Direct fax: +(39) 06/505 54 61
e-mail: m.serra@c-s-m.it
IT-00128
Contract N°
RFSR-CT-2005-00052
Reference N°
TGS5.5/05
1.265.704
759.422
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Improvement of line productivity and of immersed hot dip galvanizing roll lifetime by dross build-up-control
The high standard of hot dip coating quality for automotive and industry markets requires no contact between dross and steel sheet. Improvement in terms
of coating quality and line productivity can be achieved by decreasing the progressive adhesion of dross on immersed rolls.
The objective of this project is to increase the immersed hot dip galvanizing roll lifetime of 30% and consequently line productivity and coating quality by
controlling dross build-up phenomena.
After identifying on industrial lines the main parameters of dross build-up, some laboratory simulations and modelling work will help us to understand the
mechanism explaining dross build-up and to propose, evaluate and test some industrial solutions to avoid it.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mrs Claudie DULCY
Direct line: +(33) 3/87 70 43 74
Direct fax: +(33) 3/87 70 47 13
e-mail: claudie.dulcy@arcelormittal.com
Department: Metal Coating Process Research
(P)
CRM
Responsible: Mr Yves HARDY
Organisation: CRM
Direct line: +(32) 4/254 62 37
Direct fax: +(32) 4/254 64 62
ASBL
e-mail: hardy@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
142
(P)
VOEST-ALPINE
Responsible: Dipl. -Ing. Josef HAGLER
Direct line: +(43) 70 6585 36 02
Direct fax: +(43) 70 6980 49 41
e-mail: josef.hagler@voestalpine.com
AT-4020 LINZ
(P)
ARCELOR EHS
Responsible: Mr Gunter WIEDNER
Direct line: +(49) 3364/37 69 51
Organisation: EKO STAHL
Direct fax: +(49) 3364/37 65 6951
EKO STAHL
e-mail: gunter.wiedner@eko.arcelor.com
Department: Hot dip galvanising line
(P)
FQZ
Responsible: Mr Peter FOERSTER
Direct line: +(49) 3364/37 23 06
Organisation: FQZ BRANDENBURG
Direct fax: +(49) 3364/37 58 71
FORSCHUNGS- UND QUALITÄTSZENTRUM
BRANDENBURG GmbH
e-mail: foerster@fqz-brandenburg.de
Contract N°
RFSR-CT-2006-00015
Reference N°
TGS5.01/06
1.566.642
939.984
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Novel annealing procedures for improving HDG of HSS
Acronym NOVANNEAL
:
The inert oxides of modern high strength steels are a major problem for hot dip galvanizing. Especially interesting from the industrial point of view are
concepts to avoid surface oxide formation by enhancing internal oxidation by increasing the dew point. The idea of the project is to investigate simpler to
apply alternatives to these existing concepts, as for example the lowering of the hydrogen content in
the forming gas. Other questions involve whether prediction tools for wettability can be developed by completing the research recently made and how far
wettability and adhesion of the zinc coating to the steel are correlated.
State of progress:
Partners
(CO)
MPIE
Responsible: Dr Michael ROHWERDER
Organisation: MPIE
Direct line: +(49) 211/6792-442
Direct fax: +(49) 211/6792-218
EISENFORSCHUNG GmbH
e-mail: rohwerder@mpie.de
(P)
DOC
Responsible: Mr Ronny LEUSCHNER
Organisation: DOC
Direct line: +(49) 231/844 5462
Direct fax: +(49) 231/844 3470
DOC DORTMUNDER
OBERFLÄCHENCENTRUM GmbH
Address: Eberhardstraße 12
e-mail: ronny.leuschner@thyssenkrupp.com
DE-44145 DORTMUND
143
(P)
VOEST-ALPINE
Responsible: Dr Gerhard ANGELI
Direct line: +(43) 732/6585-73030
Direct fax: +(43) 732/6980-6004
VOESTALPINE STAHL LINZ
e-mail: gerhard.angeli@voestalpine.com
Address: VOEST-ALPINE Strasse, 3
AT-4031 LINZ
(P)
CRM
Responsible: Dr. Louis BORDIGNON
Direct line: +(32) 4/254 62 51
Organisation: CRM
Direct fax: +(32) 4/254 62 62
ASBL
e-mail: bordignon@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
Contract N°
RFSR-CT-2006-00016
Reference N°
TGS5.02/06
1.556.741
934.046
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Development of a waviness measurement for coated products
Acronym WAVIMETER
:
Waviness is an important parameter as, if it is above defined limits, the steel user does not accept the product because it causes scrap or bad quality in the
further processing. But, except for high glossy surfaces, it is mostly not eye visible before painting. So, an on-line measuring system is of great interest for
it will measure the waviness not only at the head or tail of coil but all along it.
The new system will be developed on the base of CRM on-line microscope integrating high speed components, stitching algorithms and multiprocessor
implementation.
The project will cover the validation of the technique in laboratory and in industry. Industrial partners will be deeply involved in the industrial validation
but also in the analysis of the database so constituted. This database, regrouping waviness measurement and production parameters, will be analysed to
define guidelines to improve the process and so the product quality.
State of progress:
Partners
(CO)
CRM
Responsible: Mrs Geneviève MOREAS
Organisation: CRM
Direct line: +(32) 4/254 63 06
Direct fax: +(32) 4/254 64 64
ASBL
e-mail: moreas@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
ARCELOR RESEARCH
Responsible: Dr. Gabriel FRICOUT
Direct line: +(33) 3/87 70 41 97
Direct fax: +(33) 3/87 70 41 08
e-mail: gabriel.fricout@arcelormittal.com
144
(P)
VDEH-BFI
Responsible: Dr -Ing Oswald DEUTSCHER
Direct line: +(49) 211/6707 243
Direct fax: +(49) 211/6707 923 243
e-mail: oswald.deutscher@bfi.de
Department: Wear and Surface Technology
(P)
SEGAL
Responsible: Mr Ernesto MONTAGNA
Direct line: +(32) 4/273 73 20
Organisation: SEGAL
Direct fax: +(32) 4/273 80 80
SOCIETE EUROPEENNE DE GALVANISATION
SA - SEGAL
Address: Chaussée de Ramioul 50
e-mail: ernesto.montagna@segal.be
BE-4400 FLEMALLE (IVOZ-RAMET)
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 64 39
Direct fax: +(34) 98/512 63 75
Department: I&R
Contract N°
RFSP-CT-2007-00017
Reference N°
TGS5.01/07
1.554.800
621.920
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Improvement of productivity on hot dip galvanizing line by decreasing strip vibrations in gas jets cooling system
Acronym Stripvibrations reduction
:
The high standard of hot dip coating quality requires a good stability of the strip particularly in the cooling tower (Fig.1) after the zinc bath, where the strip
is excited by gas jets cooling equipments. The stakes are estimated at about 3 to 4 M €/line/year, what represents a gain of 75 to 100 M€/year for the
concerned European lines. The objective of this project is to increase the line productivity and coating quality by decreasing strip vibrations, not with new
external stabilizing actuators but by the improvement of the existing cooling technology.
The pilot project is divided in three working axes:
- Analysis of strip vibrations on the cooling tower of Arcelor Steel Belgium industrial line;
- Opitmisation of the influent parameters on the experimental cooling device of Arcelor Research plant;
- Installation and optimisation of the improved proposed solution in industrial conditions.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mrs Karen BEAUJARD
Direct line: +(33) 3/87 70 47 28
Direct fax: +(33) 3/87 70 47 13
e-mail: karen.beaujard@arcelormittal.com
Department: Metal Coating Process Research
(P)
DREVER
Responsible: Dr Michel RENARD
Organisation: DREVER
Direct line: +(32) 4/366 62 49
Direct fax: +(32) 4/367 76 78
DREVER INTERNATIONAL SA
e-mail: renard@drever.be
Address: Parc Scientifique du Sart-Tilman
Allée des Noisetiers 15
BE-4031 ANGLEUR
145
(P)
ARCELOR BELGIUM
Responsible: Mr Tom ROELANDT
Telephone: +(32)
Organisation: ARCELOR BELGIUM
Fax: +(32)
ARCELOR STEEL BELGIUM NV
e-mail: tom.roelandt@arcelormittal.com
Address: Ijzerlaan 24
BE-1040 BRUSSEL
Contract N°
RFSR-CT-2007-00018
Reference N°
TGS5.02/07
959.871
575.922
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Methodology of hydrogen measurement in coated steels
Acronym Hppm
:
The set up of clear and rigorous methodologies of hydrogen measurement is mandatory to continue the development of coated steel products with high
strength and sensitive microstructures to hydrogen embrittlement. How to measure 0.1 mass ppm of hydrogen which diffuses very rapidly at room
temperature and is present in numerous sources of contamination? The work program is divided into five inter-related work packages to answer concretely
to the metallurgist requests: calibration of analysers, sample preparation, bulk analysis, local analysis, distinction of traps and origin of hydrogen.
State of progress:
Partners
(CO)
MPIE
Responsible: Dr. Achim Walter HASSEL
Organisation: MPIE
Direct line: +(49) 211/6792-464
Direct fax: +(49) 211/6792-218
EISENFORSCHUNG GmbH
Department: Research Group
e-mail: hassel@elchem.de
(P)
CRM
Responsible: Dr Cedric GEORGES
Organisation: CRM
Direct line: +(32) 4/2546 242
Direct fax: +(32) 4/2546 262
ASBL
e-mail: georges@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
TKS
Responsible: Dipl.Ing. Karin BERGERS
Organisation: TKS
Direct line: +(49) 203/52 44 669
Direct fax: +(49) 203/52 24 719
e-mail: karin.bergers@thyssenkrupp.com
Department: 361 WSK-A-CA
Address: Kaiser-Wilhelm-Strasse 100
DE-47166 DUISBURG
(P)
VOEST-ALPINE
Responsible: Dr Alexander TOMANDL
Direct line: +(43) 70/6585 6828
Direct fax: +(43) 70/6980 4941
e-mail: alexander.tomandl@voestalpine.com
Department: R&D
AT-4031 LINZ
146
Contract N°
RFSR-CT-2008-00017
Reference N°
TGS5.01/08
1.384.623
830.774
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Innovative packaging steel with enhanced adhesion to organic coatings based on nanostructured interphases
Acronym IPSA
:
The development of an innovative packaging steel with enhanced adhesion to organic coatings allowing deforming processes like deep draw-redraw will
lead to superior corrosion resistance. Surface treatments like plasma/corona treatment and plasma deposition will be used to generate thin oxide films on
blackplate or metal coated blackplate. Combination with water based surface tretaments (commercial available or with known chemical composition) like
silanes will result in a superior adhesion system for lacquers and thermoplastic films. All surface treatments investigated shall be applicable at industrial
line speed. Using innovative, environmentally friendly treatments this product will replace Electrolytic Chromium Coated Steel.
State of progress:
Partners
(CO)
RASSELSTEIN
Responsible: Dr. Andrea MARMANN
Organisation: RASSELSTEIN
Direct line: +(49) 2632/3097 40 89
Direct fax: +(49) 2632/3097 49 33
RASSELSTEIN GmbH
e-mail: andrea.marmann@thyssenkrupp.com
Department: Surface Technology
Address: Koblenzer Straße 141
DE-56626 ANDERNACH
(P)
ARCELOR RESEARCH
Responsible: Mr Yoann JACQUES
Direct line: +(33) 3/87 70 47 75
Direct fax: +(33) 3/87 70 41 18
e-mail: yoann.jacques@arcelormittal.com
(P)
CORUS NL
Responsible: Dr. Jan Paul PENNING
Direct line: +(31) 251/498 738
Fax: +(31) 251/47 11 07
TECHNOLOGY CENTRE
e-mail: jan-paul.penning@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
FHG
Responsible: Dr. Inés DANI
Organisation: IWS
Direct line: +(49) 351/2583 405
Direct fax: +(49) 351/2583 440
FRAUNHOFER INSTITUTE FOR MATERIAL
AND BEAM TECHNOLOGY
Address: Winterbergstrasse 28
e-mail: ines.dani@iws.fraunhofer.de
DE-01277 DRESDEN
147
Contract N°
RFSR-CT-2008-00018
Reference N°
TGS5.02/08
1.490.294
894.176
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Microbiologically induced corrosion of steel structures in port environment: improving prediction and diagnosis of ALWC
Acronym MICSIPE
:
Some European port authorities are currently concerned by a localised and accelerated corrosion, called Accelerated Low Water Corrosion (ALWC)
occurring on steel waterfront structures. High corrosion rates induced can shorten drastically service life of the structure or lead to failure. Solutions to
mitigate this
corrosion are available but maintenance of these structures still remains costly.
Previous studies showed that ALWC is microbiologically induced; however mechanisms and bacteria involved have not been entirely determined until now.
This project aims at developing diagnostic tools and a risk assessment method for industrial end users to predict and assess ALWC by using advanced
molecular methods.
State of progress:
Partners
(CO)
CORRODYS
Responsible: Dr Samuel PINEAU
Organisation: CORRODYS
Direct line: +(33) 2/33 01 83 47
Direct fax: +(33) 2/33 03 06 50
CENTRE REGIONAL D'INNOVATION ET DE
TRANSFERT DE TECHNOLOGIE B-N COT.
Department: R&D
Address: 55, rue de Beuzeville
e-mail: spineau@corrodys.com
FR-50120 EQUEURDREVILLE
(P)
ARCELOR PROFIL
Responsible: Mrs Anne FAGOT
Direct line: +(352) 5313 2162
Direct fax: +(352) 5313 2199
S.A.
e-mail: anne.fagot@arcelormittal.com
(P)
KIMAB
Responsible: Dr Rolf GUBNER
Organisation: KIMAB
Direct line: +(46) 8/674 17 45
Direct fax: +(46) 8/674 17 80
SWEREA KIMAB AB
e-mail: rolf.gubner@swerea.se
Department: Department Manager
SE-11428 STOCKHOLM
(P)
UNIV CADIZ
Responsible: Prof Dr Francisco Javier BOTANA
PEDEMONTE
Organisation: UNIV CADIZ
Direct line: +(34) 95/6016 154
Direct fax: +(34) 95/6016 154
UNIVERSIDAD DE CADIZ
e-mail: javier.botana@uca.es
Address: Calle Ancha 16
ES-11001 CADIZ
(P)
TU DELFT
Responsible: Dr Ir Gerard MUIJZER
Direct line: +(31) 15/278 11 93
Fax: +(31) 15/278 23 08
DELFT UNIVERSITY OF TECHNOLOGY
e-mail: g.muijzer@tudelft.nl
NL-2600 GA DELFT
148
(P)
UNIV ROUEN
Responsible: Dr Laurent QUILLET
Direct line: +(33) 2/32 76 94 51
Organisation: UNIV ROUEN
Direct fax: +(33) 2/35 14 66 84
UNIVERSITE DE ROUEN HAUTE-NORMANDIE
e-mail: laurent.quillet@univ-rouen.fr
Address: Rue Thomas Becket 1
FR-76821 MONT SAINT AIGNAN
Contract N°
RFSR-CT-2008-00019
Reference N°
TGS5.03/08
1.147.262
688.358
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Steady reactivity in hot-dip coating by direct deposit of iron oxides
Acronym FERRIGAL
:
The inert oxides of resistance steel grades are a major problem for hot dip galvanizing. Especially interesting from the industrial point of view are concepts
to avoid surface oxide formation of alloying elements. One approach is to modify the annealing procedure prior to hot dip galvanising. This proposal
suggests a much simpler and easy to apply procedure: to deposit a thin iron oxide layer, e.g. by a simple dipping deposition, as barrier against segregation.
The iron oxide is reduced during the annealing and serves then as a reactive surface excellently wettable by the liquid zinc.
State of progress:
Partners
(CO)
CRM
Responsible: Dr Maiwenn LARNICOL
Organisation: CRM
Direct line: +(32) 4/254 62 40
Direct fax: +(32) 4/254 64 44
ASBL
e-mail: larnicol@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
MPIE
Organisation: MPIE
Direct line: +(49) 211/6792-442
Direct fax: +(49) 211/6792-218
EISENFORSCHUNG GmbH
(P)
OCAS
Responsible: Mrs Victoria MASAGUER
Organisation: OCAS
Direct line: +(32) 9/345 12 33
Direct fax: +(32) 9/345 12 04
e-mail: victoria.masaguer@arcelormittal.com
BE-9060 ZELZATE
(P)
CORUS NL
Responsible: Dr. Florian MENGUELTI
Direct line: +(31) 251/497 431
Direct fax: +(31) 251/470 265
TECHNOLOGY CENTRE
e-mail: florian.menguelti@corusgroup.com
NL-1970 CA IJMUIDEN
149
Contract N°
RFSR-CT-2008-00046
Reference N°
TGS5.04/08
1.908.963 1.145.378
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Novel externally enhanced pickling improvement for short / mid term
Acronym NEXTEP
:
At long term, it is expected that process improvements in hot-rolling will decrease the oxide layer and as a consequence pickling of carbon steel should be
in the future either strongly reduced or fully eliminated. However at short/mid term pickling remains a necessary operation that constitutes a bottleneck in
strip production. This project aims at boosting techniques to be applied at short term to enable pickling line to cope with new difficult-to-pickle grades, to
reduce
the energy intensity and the environmental impact. Different routes will be analysed in laboratory, namely alternating current processing, reactive operation
and remote cavitation.
Pilot line tests will be performed in optimised conditions. Main results will be the selection and full characterisation (operative window and process
performances) of candidate solutions for industrial application.
State of progress:
Partners
(CO)
ILVA
Responsible: Mr Floriano FERRO
Organisation: ILVA
Direct line: +(39) 010/607 83 26
Direct fax: +(39) 010/607 90 77
ILVA SpA
e-mail: ricerca.genova@rivagroup.com
IT-16154 GENOVA
(P)
VDEH-BFI
Responsible: Dr Frank RÖGENER
Direct line: +(49) 211/6707 315
Direct fax: +(49) 211/6707 377
e-mail: frank.roegener@bfi.de
Department: R&D
(P)
CRM
Responsible: Mr Jean CRAHAY
Organisation: CRM
Direct line: +(32) 4/254 62 30
Direct fax: +(32) 4/254 62 62
ASBL
e-mail: crahay@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
CSM
Responsible: Dr Armando GIANNETTI
Organisation: CSM
Direct line: +(39) 06/505 52 21
Direct fax: +(39) 06/505 54 61
e-mail: a.giannetti@c-s-m.it
IT-00128
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
150
(P)
TENOVA
Responsible: Ing Gerolamo FASCE
Direct line: +(39) 010/605 45 50
Direct fax: +(39) 010/605 49 29
TENOVA / Strip Processing Lines
e-mail: gerolamo.fasce@it.tenovagroup.com
Address: Torre Shipping
Via De Marini, 53
IT-16149 GENOVA
(P)
VAI CLECIM
Responsible: Mr Philippe BARBIERI
Organisation: VAI CLECIM
Direct line: +(33) 4/77 29 82 09
Direct fax: +(33) 4/77 29 83 87
SIEMENS VAI METALS TECHNOLOGIES SAS
e-mail: philippe.barbieri@siemens.com
Address: 51 rue Sibert
FR-42400 SAINT CHAMOND
151
Technical Group TGS6 :"Physical metallurgy and design of new generic steel grades"
Contract N°
RFS1-CT-2005-00025
Reference N°
TGS6.1/05
85.800
20.000
Duration
Dates:
3 (Mths)
Starting
Ending
Actual
1/07/2005 30/09/2005 30/09/2005
Title: Microalloying for new steel processes and applications
Acronym MICROAS 05
:
The objective of the present proposal is the organisation and hosting of an International Symposium on the use of microalloying in steels for new processes
and applications.
The scope of the conference is to provide a forum for researchers and industrialist from the European Union and abroad to discuss developments and new
perspectives on microalloying in novel applications and improved steel grades.
Within this frame, and given the participation of European researches in previous Conferences on similar topics, the diffusion of results gained on research
projects founded by the European Commission Steel RTD programme is assured.
State of progress:
Partners
(CO)
CEIT
Responsible: Dr. José Maria RODRIGUEZ IBABE
Organisation: CEIT
Direct line: +(34) 943/21 28 00
Direct fax: +(34) 943/21 30 76
e-mail: jmribabe@ceit.es
Barrio de Ibaeta
Contract N°
RFSR-CT-2005-00026
Reference N°
TGS6.2/05
1.215.497
729.299
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Properties improvement by stress-assisted control of the metallurgical transformations for HSS and BH steels
Acronym PISAC
:
The nature and the morphology of the microstructures control obviously the mechanical properties of steels especially for HSS and BH steels. The
microstructures are usually obtained changing the temperature, the chemical composition and plastic deformation before phase transformations and
recrystallisation. A complementary fully innovative approach to microstructure control is proposed here.
Applied stress is considered as a new driving force for metallurgical evolutions. Indeed stress effects afford many promising opportunities :
- slow down phase transformation for compression like state,
- accelerate phase transformation for tension like state,
- change the nucleation and so exhibit an impact on structure size (refinement),
- provide a specific spatial orientation (texture).
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mr Philippe MAUGIS
Direct line: +(33) 3/87 70 47 67
Direct fax: +(33) 3/87 70 47 12
e-mail: philippe.maugis@arcelormittal.com
(P)
TKS
Responsible: Dipl.-Ing. Georg PAUL
Organisation: TKS
Direct line: +(49) 203/52-4 41 82
Direct fax: +(49) 203/52- 25 938
e-mail: georg.paul@thyssenkrupp.com
Department: 360 WSK-WE-WM
DE-47166 DUISBURG
152
(P)
CORUS UK
Responsible: Mr Peter J. EVANS
Direct line: +(44) 1639/87 11 11
Ext.: 3336
Direct fax: +(44) 1639/87 23 72 or 40
CORUS UK LIMITED
e-mail: peter.j.evans@corusgroup.com
Address: Heol Cefn Gwrgan
GB- PORT TALBOT SA13 2EZ
(P)
CRM
Responsible: Mrs. Annick DE PAEPE
Direct line: +(32) 9/264 57 65
Organisation: CRM
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: depaepe@rdmetal.ulg.ac.be
Contract N°
RFSR-CT-2005-00027
Reference N°
TGS6.3/05
1.592.775
955.666
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: A novel, high-performance, economic steel concept for linepipe and general structural use
Acronym HIPERC
:
Several steel companies have confirmed the potential of a niobium-alloyed, low-carbon steel that combines excellent strength and toughness using both air
and forced cooling following processing for the heavy pipe market. The metallurgical concept is relevant to other market sectors and this project will
develop structure property relationships to define chemical analysis and process route limits of this steel type for a) thick-walled pipe and flat plate, and b)
coiled-plate for both pipe and general use. The results will identify and justify what changes are required to Euronorms for the steel to be available for a
wide range of uses.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Mr Lynden DREWETT
Direct line: +(44) 1709/825 130 or 437
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: lyn.drewett@corusgroup.com
Rotherham
(P)
SZMF
Responsible: Dr -Ing Volker FLAXA
Organisation: SZMF
Direct line: +(49) 5341/21 27 15
Direct fax: +(49) 5341/21 38 16
SALZGITTER MANNESMANN FORSCHUNG
GmbH
Department: TQEW-Material Development
Address: Eisenhüttenstrasse, 99
e-mail: v.flaxa@sz.szmf.de
DE-38239 SALZGITTER
(P)
OCAS
Responsible: Mr Martin LIEBEHERR
Organisation: OCAS
Direct line: +(32) 9/345 13 56
Direct fax: +(32) 9/345 12 04
Department: Substrate and Metallic Coating Development
e-mail: martin.liebeherr@arcelormittal.com
BE-9060 ZELZATE
153
(P)
UGENT
Responsible: Prof. Dr. Ir. Wim DE WAELE
Organisation: UNIV GENT
Direct line: +(32) 9/264 32 56
Direct fax: +(32) 9/264 78 85
UNIVERSITEIT GENT
e-mail: wim.dewaele@ugent.be
Address: Sint-Pietersnieuwstraat 41
BE-9000 GENT
(P)
CEIT
Responsible: Dr. Antonio MARTIN MEIZOSO
Organisation: CEIT
Direct line: +(34) 943/21 28 00
Direct fax: +(34) 943/21 30 76
e-mail: ameizoso@ceit.es
Barrio de Ibaeta
(P)
INSTSP
Responsible: Dr. Boguslaw CZWORNOG
Organisation: INSTSP
Direct line: +(48) 32/332 4105
Direct fax: +(48) 32/231 4652
INSTYTUT SPAWALNICTWA
e-mail: boguslaw.czwornog@is.gliwice.pl
Address: Blogoslawionego Czeslawa 16/18
PL-44-100 GLIWICE
(P)
RWTH
Responsible: Prof. Dr -Ing Wolfgang BLECK
Organisation: RWTH
Direct line: +(49) 241/80 95 783-782
Direct fax: +(49) 241/80 92 2253
e-mail: bleck@iehk.rwth-aachen.de
Department: Ferrous Metallurgy
DE-52072 AACHEN
(P)
NPC
Responsible: Dr. Hardy MOHRBACHER
Organisation: NPC
Direct line: +(49) 211/1380 115
Direct fax: +(49) 211/329 176
NIOBIUM PRODUCTS COMPANY GmbH
e-mail: hm@niobium.de
Department: Technical Development of Products and Marketing
Address: Steinstrasse 28
(P)
RUUKKI
Responsible: Dr. David PORTER
Direct line: +(358) 20/59 22 266
Direct fax: +(358) 20/59 23 101
RAUTARUUKKI OYJ
e-mail: david.porter@ruukki.com
Department: Product Development, Hot Rolled Products
FI-92101 RAAHE
(P)
UNIV MARIBOR
Responsible: Assoc. Prof. Dr Nenad GUBELJAK
Organisation: UMFS
Direct line: +(386) 2/220 76 61
Direct fax: +(386) 2/220 79 90
UNIVERZA V MARIBORU
e-mail: nenad.gubeljak@uni-mb.si
Address: Smetanova 17
SI-2000 MARIBOR
154
Contract N°
RFSR-CT-2005-00028
Reference N°
TGS6.4/05
1.131.546
678.928
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Modification of textural distribution in hot rolled stainless steels using asymmetric hot rolling technique
Acronym ASTEX
:
The presence of orientation bands in hot rolled strips, due to a columnar solidification structure that can hardly be broken by conventional symmetric hot
rolling, originates in final products of ferritic stainless steels a surface defect known as “ridging” (or roping) and has a detrimental effect on deep drawing
ability.
The aim of this project is to investigate the combined effect of the asymmetric hot rolling (e.g. rolling performed using different roll diameters) and the
influence of deformation given in the final passes on the microstructural and textural distribution in the hot rolled strip and the resultant microstructure
textures and
mechanical properties in final gauge ferritic stainless strips, as a possible solution to the roping phenomena and for improving deep drawing ability.
State of progress:
Partners
(CO)
CSM
Organisation: CSM
Direct line: +(39) 06/505 57 81
Direct fax: +(39) 06/505 54 61
IT-00128
(P)
CRM
Responsible: Mr Hendrik VANDEKINDEREN
Organisation: CRM
Direct line: +(32) 4/264 57 74
Direct fax: +(32) 4/264 58 34
ASBL
Department: Department of Solidification, Rolling and Thermal T
e-mail: vdkinderen@rdmetal.ulg.ac.be
(P)
UGINE & ALZ France
Responsible: Dr. Francis CHASSAGNE
Organisation: U&A
Direct line: +(33) 3/21 63 20 48
Direct fax: +(33) 3/21 63 20 56
UGINE & ALZ
e-mail: francis.chassagne@ugine-alz-arcelor.com
Department: Centre de Recherches d'Isbergues
Address: rue Roger Salengro
FR-62330 ISBERGUES
(P)
CORUS UK
Responsible: Dr. John BUTLER
Direct line: +(44) 1709/825 323
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: john.butler@corusgroup.com
Rotherham
155
Contract N°
RFSR-CT-2005-00029
Reference N°
TGS6.5/05
1.796.570 1.077.942
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Toughness and ductility improvement in complex microstructure HSS by means of microstructural parameters
optimization
Acronym MISTRETO
:
High and ultra-high strength- steels with yield strengths above 1000 MPa are now increasingly required by the end users.
However, when increasing the strength, the toughness, ductility and formability are impaired.
Fine and complex multiphase microstructures allow to improve these properties. However, increasing the complexity of the microstructure makes more and
more difficult to identify the microstructural features that are directly related to the mechanical behaviour.
This project aims to improve toughness and ductility of high strength steels with complex bainitic/martensitic microstructures and dual phase steels, by
identifying the microstructure constituents which control these properties.
Models will be developed to predict toughness and ductility behaviour and these will be utilised to aid industrial scale evaluation of new high-strength
steels.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Andrea DI SCHINO
Organisation: CSM
Direct line: +(39) 06/50 55 817 or 765
Direct fax: +(39) 06/50 55 461 or 412
e-mail: a.dischino@c-s-m.it
IT-00128
(P)
CEIT
Responsible: Dr Isabel GUTIERREZ SANZ
Organisation: CEIT
Direct line: +(34) 943/21 28 00
Direct fax: +(34) 943/21 30 76
Department: Thermomechanical Treatments Units
e-mail: igutierrez@ceit.es
Barrio de Ibaeta
(P)
CSIC
Responsible: Dr. Sebastian MEDINA
Direct line: +(34) 91/553 89 00
Direct fax: +(34) 91/534 47 25
METALURGICAS
Department: Head of Hot Deformation Group
e-mail: smedina@cenim.csic.es
ES-28040 MADRID
(P)
ARCELOR RESEARCH
Responsible: Mrs Gwenola HERMAN
Direct line: +(33) 3/87 70 47 48
Direct fax: +(33) 3/87 70 47 12
e-mail: gwenola.herman@arcelormittal.com
(P)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 84
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
156
(P)
VOEST-ALPINE
Responsible: Mag. Martin KLEIN
Direct line: +(43) 70/6585 3895
Direct fax: +(43) 70/6980 4338
e-mail: martin.klein@voestalpine.com
Department: B3E
AT-4020 LINZ
Contract N°
RFSR-CT-2005-00030
Reference N°
TGS6.6/05
1.436.332
861.800
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2009
Title: Metallurgical design of high strength austenitic Fe-C-Mn steels with excellent formability
Acronym Metaldesign
:
This project is aimed at deeply investigating the basic TWIP steel metallurgy focusing on the following aspects: recrystallization and grain growth
behaviour, precipitation, as well as the metallurgical aspects linking the microstructure to properties of industrial interest such as mechanical properties,
forming, welding and coating ability.
Evolution models for the austenite will be modified in order to describe the TWIP steels recrystallization behaviour and allow the design of manufacturing
cycles both for hot rolled strip for direct use and cold rolled products.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Alessandro FERRAIUOLO
Organisation: CSM
Direct line: +(39) 0744/487 275
Direct fax: +(39) 0744/470 927
CSM - SEDE DI TERNI
e-mail: a.ferraiuolo@c-s-m.it
IT-05100 TERNI
(P)
CEIT
Responsible: prof. Dr Javier GIL SEVILLANO
Organisation: CEIT
Direct line: +(34) 943/212 800
Direct fax: +(34) 943/213 076
e-mail: jgil@ceit.es
Barrio de Ibaeta
(P)
DUFERCO
Responsible: Dr. Ing. Giuseppe PRATOLONGO
Direct line: +(32) 64/272 812
Direct fax: +(32) 64/272 598
e-mail: g.pratolongo@duferco.be
Department: Metallurgy & Quality
BE-7100 LA LOUVIERE
(P)
ISQ
Organisation: ISQ
Direct line: +(351) 21/422 81 96
Direct fax: +(351) 21/422 81 26
Talaide
157
(P)
UNIV OULU
Responsible: Prof. Pentti KARJALAINEN
Direct line: +(358) 8/55 32 140
Direct fax: +(358) 8/55 32 165
Department: Materials Engineering Laboratory
e-mail: pentti.karjalainen@oulu.fi
FI-90401 OULU
Contract N°
RFSR-CT-2005-00031
Reference N°
TGS6.7/05
1.212.554
582.992
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Cold heading quality low-carbon ultra-high strength bainitic steels
Acronym COHEADBAIN
:
The project aims at developing low-carbon high – strength bainitic steels dedicated for cold heading applications without heat treating operations. Next, to
design the hot rolling routes giving the optimal bainitic microstructure in the wire rod and bar in terms of headability and the final product properties. Cold
headability of commonly used steels is critically sensitive to differences between the mechanical properties of hard (cementite) and soft (ferrite)
microstructure constituents. Therefore, one-phase low-carbon precipitation-strengthened bainitic ferrite is an ideal microstructure for cold working
operations.
On the project completion, semi–finished products of bainitic steel, as well as cold–headed products, will be produced and characterized.
State of progress:
Partners
(CO)
IMZ
Responsible: Dr Roman KUZIAK
Organisation: IMZ
Direct line: +(48) 32/234 52 41
Direct fax: +(48) 32/234 53 03
INSTYTUT METALURGII ZELAZA IM.
STANISLAWA STASZICA
Department: Laboratory
Address: ul. Karola Miarki 12-14
e-mail: rkuziak@imz.gliwice.pl
PL-44100 GLIWICE
(P)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 84
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
TU BA
Organisation: TU BA
Direct line: +(49) 3731/39 24 79
Direct fax: +(49) 3731/39 36 56
DE-09596 FREIBERG
(P)
MITTALAST
Responsible: Dr. Karl STERCKEN
Organisation: MITTALAST
Direct line: +(49) 40/7408-310
Direct fax: +(49) 40/7408-311
MITTAL STEEL HAMBURGGmbH
e-mail: karl.stercken@mittalsteel.com
Department: Technical Services
Address: Dradenaustrasse 33
DE-21129 HAMBURG
158
(P)
MITPOL
Responsible: Dr. Jerzy STODOLNY
Direct line: +(48) 12/644 96 97
Organisation: MITTAL STEEL POLAND
Direct fax: +(48) 12/642 11 71
MITTAL STEEL POLSKA SA
e-mail: jstodolny@hts.com.pl
Department: Process and Product Development
Address:
PL-30-969 KRAKOW
(P)
VMS
Responsible: Dr. Lotfi CHABBI
Direct line: +(41) 41/41 209 5318
Organisation: VMS
Direct fax: +(41) 41/41 209 5310
SWISS STEEL AG
e-mail: lchabbi@von-moos-stahl.ch
Address: Emmenweidtstrasse 90
CH-6021 EMMENBRÜCKE
Contract N°
RFSR-CT-2006-00017
Reference N°
TGS6.01/06
2.340.492 1.404.296
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Microstructural quantification of multi phase steels
Acronym MICRO-QUANT
:
A profound understanding of microstructure-properties relationships of Advanced High Strength steels is of crucial importance to a rational development of
these steels. This demands the ability to perform advanced quantification of their complex multi phase microstructures, addressing the full range of
microstructural properties that are relevant to their macroscopic mechanical behaviour. This in turn requires a suit of metallographic procedures, primarily
based on high-resolution electron optical techniques to deal with the submicron microstructural
dimensions. The aim of this project is to develop a range of standardised metallographic procedures dedicated to accurate and reproducible microstructural
quantification of complex multi phase microstructures.
State of progress:
Partners
(CO)
CORUS NL
Responsible: Mr Maxim AARNTS
Direct line: +(31) 251/491 233
Direct fax: +(31) 251/470 407
TECHNOLOGY CENTRE
e-mail: maxim.aarnts@corusgroup.com
NL-1970 CA IJMUIDEN
(P)
ARCELOR RESEARCH
Responsible: Mr Didier HUIN
Direct line: +(33) 3/87 70 42 03
Direct fax: +(33) 3/87 70 47 12
e-mail: didier.huin@arcelormittal.com
(P)
CRM
Responsible: Dr. Ir. Liesbeth BARBE
Organisation: CRM
Direct line: +(32) 9/264 57 95
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: barbe@rdmetal.ulg.ac.be
159
(P)
KIMAB
Direct line: +(46) 8/440 48 84
Organisation: KIMAB
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
RWTH
Responsible: Prof. Dr-Ing Wolfgang BLECK
Organisation: RWTH
Direct line: +(49) 241/80 95 783
Direct fax: +(49) 241/80 92 224
Department: Institut für Eisenhüttenkunde
DE-52072 AACHEN
(P)
TKS
Responsible: Dr. Volker MARX
Direct line: +(49) 203/52 42729
Organisation: TKS
Direct fax: +(49) 203/52 42879
e-mail: volker.marx@thyssenkrupp.com
DE-47161 DUISBURG
(P)
VOEST-ALPINE
Responsible: Dipl. -Ing. Reinhard HACKL
Direct line: +(43) 732/6585 73084
Direct fax: +(43) 732/6980 6712
e-mail: reinhard.hackl@voestalpine.com
Department: Microstructure and Surface Analysis
AT-4020 LINZ
Contract N°
RFSR-CT-2006-00019
Reference N°
TGS6.02/06
1.402.388
841.432
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Magnetic field processing for customized microstructures and properties in steels
Acronym MAGPRO
:
Phase stability, kinetics of phase transformation and texture evolution in steels
are strongly influenced by the application of high magnetic fields.
The aim of this project is to investigate the influence of high magnetic field
processing on the phase equilibria and on the kinetics of the microstructural
evolution in steels and to define the guidelines to develop a new production
process to enhance the microstructural properties of steels not achievable by
conventional thermomechanical processing routes.
State of progress:
Partners
(CO)
CSM
Organisation: CSM
Direct line: +(39) 06/505 57 81
Direct fax: +(39) 06/505 54 61
IT-00128
160
(P)
CRM
Responsible: Dr. Catherine ELGOYHEN
Organisation: CRM
Direct line: +(32) 9/264 45 766
Direct fax: +(32) 9/264 45 834
ASBL
e-mail: elgoyhen@agt0.rdmetal.ulg.ac.be
(P)
ARCELOR RESEARCH
Responsible: Dr. Jean-Louis URIARTE
Direct line: +(33) 3/87 70 47 42
Direct fax: +(33) 3/87 70 47 12
e-mail: jean-louis.uriarte@arcelormittal.com
(P)
CNRS
Responsible: Prof. Eric BEAUGNON
Direct line: +(33) 4/76 88 12 11
Organisation: CNRS
Direct fax: +(33) 4/76 88 12 80
CENTRE NATIONAL DE LA RECHERCHE
SCIENTIFIQUE
Address: 25 avenue des Martyrs
e-mail: beaugnon@grenoble.cnrs.fr
FR - 38042 GRENOBLE CEDEX 9
Contract N°
RFSR-CT-2006-00020
Reference N°
TGS6.03/06
1.224.657
734.794
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Novel oxide dispersion strengthened steels obtained by high productivity casting process with innovative injection of
suitable special powders
Acronym ODS-STEEL
:
The objective of the proposal is to develop a new generation of stainless steels obtained by means of dispersion of fine ceramic particles into the metal
matrix. The dispersion is realised during the continuous casting process by injecting suitable developed powders into the melt stream.
These stainless steels will have:
· A modified as-cast structure, as the particles promote an equiaxed solidification by heterogeneous nucleation
· Increased mechanical properties at both room and high temperature
· Properties insensitive to post heat treatments (e.g. welding)
The development activity will be performed on one ferritic, AISI 439 and one austenitic, AISI 301LN stainless grades and on one austenitic special steel.
The project and will take into account the whole manufacturing cycle (casting, hot rolling, annealing, cold rolling and annealing) even though the heart of
the innovation concerns the injection of the ceramic powder into the melt stream during the casting process.
The effect on the mechanical properties, both at room and at high temperature, will be verified by means of appropriate testing for AISI 439. For
AISI301LN, the mechanical properties will only be tested at room temperature.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Ing. Andrea CAROSI
Organisation: CSM
Direct line: +(39) 06/505 52 85
Direct fax: +(39) 06/505 54 88
e-mail: a.carosi@c-s-m.it
IT-00128
161
(P)
CRM
Responsible: Mr Paul NAVEAU
Direct line: +(32) 4/254 64 06
Organisation: CRM
Direct fax: +(32) 4/254 64 44
ASBL
e-mail: naveau@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
UGINE & ALZ France
Responsible: Dr. Jean-Denis MITHIEUX
Organisation: U&A
Direct line: +(33) 3/21 63 21 93
Direct fax: +(33) 3/21 63 20 56
UGINE & ALZ
e-mail: jean-denis.mithieux@ugine-alz.arcelor.com
Address: rue Roger Salengro
FR-62330 ISBERGUES
(P)
CAS
Responsible: Ing Andrea LANDINI
Direct line: +(39) 0165/30 23 52
Organisation: CAS
Direct fax: +(39) 0165/30 24 23
e-mail: andrea.landini@cogne.com
IT-11100 AOSTA
Contract N°
RFSR-CT-2006-00021
Reference N°
TGS6.04/06
1.385.699
831.419
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 31/12/2009
Title: Cold-rolled complex-phase (CP) steel grades with optimised bendability, stretch-flangeability and anisotropy
Acronym CP-steels
:
The improvement of the strength-formability balance of advanced high-strength steels is still a challenging task. This project deals with the relationship
between microstructure and formability – particularly bendability and stretch-flangeability – of cold-rolled complex-phase steels. Therefore, the
transformation behaviour and a wide range of microstructures of such steels will be analysed extensively.
The overall goals of this project are to:
• Identify microstructures with optimised balance between strength, bendability and stretchflangeability.
• Develop guidelines of how to produce the material, by an appropriate alloy design, and well-adjusted processing parameters through several processing
routes, i.e. continuous annealing and hot dip galvannealing.
State of progress:
Partners
(CO)
KIMAB
Responsible: M.Sc. Lena RYDE
Organisation: KIMAB
Direct line: +(46) 8/440 48 81
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: lena.ryde@swerea.se
Department: Cold Processing
SE-11428 STOCKHOLM
(P)
RUUKKI
Responsible: MSc Päivi TAMMINEN
Direct line: +(358) 20/59 25 124
Direct fax: +(358) 20/59 25 075
RUUKKI ENGINEERING
e-mail: paivi.tamminen@ruukki.com
Department: Product Development
162
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80 95 783
Direct fax: +(49) 241/80 92 224
DE-52072 AACHEN
(P)
SSAB
Responsible: Dr. Björn CARLSSON
Direct line: +(49) 211/91 25 126
Organisation: SSAB
Direct fax: +(49) 211/91 25 129
SSAB SWEDISH STEEL GmbH
e-mail: b.carlsson@ssab.com
Department: Product Applications - Forming Technology
Address: Grafenberger Allee 87
(P)
VOEST-ALPINE
Responsible: Dr. Thomas HEBESBERGER
Direct line: +(43) 70/6585 77132
Direct fax: +(43) 70/6980 4338
e-mail: thomas.hebesberger@voestalpine.com
Department: B3E, Research and Development
AT-4031 LINZ
Contract N°
RFSR-CT-2006-00022
Reference N°
TGS6.05/06
1.280.666
768.401
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Avoiding catastrophic corrosion failure of stainless steels
Acronym CORINOX
:
Stainless steels are durable, renewable and functional materials for demanding environments, but they have the drawback that pitting, crevice corrosion or
stress corrosion cracking can cause serious failures.
Materials selection today is often based on corrosion tables which are limited to one or two parameters and rarely correspond well to demanding
environments. This project will provide a new methodology for advanced multi-dimensional design curves in terms of temperature, chloride content, pH,
potential, load
and geometry. Field and laboratory testing will be used to evaluate the risk of fast-growing cracks developing in crevices and the safety margin needed for
long-term service.
State of progress:
Partners
(CO)
KIMAB
Responsible: Dr Rachel PETTERSSON
Organisation: KIMAB
Direct line: +(46) 8/440 48 64
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: rachel.pettersson@swerea.se
SE-11428 STOCKHOLM
(P)
ACERINOX
Responsible: Dr. Maria Victoria MATRES
Direct line: +(34) 956/62 93 83
Direct fax: +(34) 956/62 94 28
ACERINOX SA
e-mail: vmatress@acxgroup.com
Department: Corrosion Lab
163
(P)
OUTOKUMPU STAINLES
Responsible: M. Sc. Lic. Anna IVERSEN
Direct line: +(46) 226/81 461
Direct fax: +(46) 226/81 077
e-mail: anna.iversen@outokumpu.com
Department: Corrosion
SE-77422 AVESTA
(P)
ISQ
Responsible: Dr. Gervásio FERREIRA PIMENTA
Organisation: ISQ
Direct line: +(351) 21/422 81 38
Direct fax: +(351) 21/422 81 21
e-mail: gfpimenta@isq.pt
Department: Laboratory of Materials and Metallurgy (LABMM)
Address: Estrada Nacional 249 - Km 3
Cabanas - Leiao (TagusPark)
PT-2781 OEIRAS CODEX
(P)
VTT
Responsible: M. Sc. Heikki LEINONEN
Organisation: VTT
Direct line: +(358) 20/722 68 55
Direct fax: +(358) 20/722 70 10
VTT MANUFACTURING TECHNOLOGY
e-mail: heikki.leinonen@vtt.fi
Address: Kemistintie 3
FI-02044 ESPOO
(P)
OUTOKUMPU
Responsible: Dr. Thomas OHLIGSCHLÄGER
Direct line: +(358) 16/453 163
Direct fax: +(358) 16/453 295
OUTOKUMPU STAINLESS OY
e-mail: thomas.ohligschlager@outokumpu.com
Address: Tornion tehtaat
FI-95400 TORNIO
(P)
SANDVIK STEEL
Responsible: Mr Ulf H. KIVISÄKK
Direct line: +(46) 26/26 49 30
Direct fax: +(46) 26/25 71 40
e-mail: ulf.kivisakk@sandvik.com
SE-81181 SANDVIKEN
(P)
BEG
Responsible: Dr. Günter HOCHÖRTLER
Organisation: BEG
Direct line: +(43) 3862/20 6577
Direct fax: +(43) 3862/20 7430
BÖHLER EDELSTAHL GMBH & CO KG
e-mail: guenter.hochoertler@bohler-edelstahl.at
AT-8605 KAPFENBERG
(P)
CTO
Responsible: Dr. Pawel DOMZALICKI
Organisation: CTO
Direct line: +(48) 58/5116214
Direct fax: +(48) 58/5116397
CENTRUM TECHNIKI OKRETOWEJ S.A. - SHIP
DESIGN AND RESEARCH CENTRE S.A.
Department: Corrosion Laboratory
Address: Al. Rzeczypospolitej 8
e-mail: domzalicki.pawel@cto.gda.pl
PL-80-369 GDANSK
164
Contract N°
RFSR-CT-2006-00023
Reference N°
TGS6.06/06
1.265.112
759.067
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 31/12/2009
Title: Martensitic steels with improved properties
Acronym MARTIMPROP
:
The maximal strength level for a given steel composition can be realised with the martensitic microstructure. However, as-quenched martensite shows some
major drawbacks such as low formability and low toughness level. Tempering at a relatively low temperature and/or keeping a certain amount of residual
austenite in the microstructure could improve these properties.
Furthermore, an additional low temperature galvanising treatment will provide an additional corrosion resistance to the hot rolled high strength strips. This
development will allow the production of coated ultrahigh strength hot rolled steel (TS higher than 1000 MPa) with superior formability and toughness
level.
State of progress:
Partners
(CO)
CRM
Responsible: Dr. Ir. Liesbeth BARBE
Organisation: CRM
Direct line: +(32) 9/264 57 95
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: barbe@rdmetal.ulg.ac.be
(P)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 84
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
VOEST-ALPINE
Responsible: Dr. Helmut SPINDLER
Direct line: +(43) 70/6585-75414
Direct fax: +(43) 70/6980-4338
e-mail: helmut.spindler@voestalpine.com
AT-4020 LINZ
(P)
OCAS
Responsible: Dr. Sophie LACROIX
Organisation: OCAS
Direct line: +(32) 9/345 13 64
Direct fax: +(32) 9/345 12 04
Department: Substrate and Metallic Coating Devlpt
e-mail: sophie.lacroix@arcelormittal.com
BE-9060 ZELZATE
165
Contract N°
RFSR-CT-2006-00024
Reference N°
TGS6.07/06
935.659
561.396
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Austenite strengthening and accumulated stress for optimum microstructures in modern bainitic microalloyed steels
Acronym ACTRESS
:
Project Actress will investigate the role of austenite strengthening on bainite transformation and therefore on microstructure and product properties.
Showing characteristics that differ from ferrite-pearlite and martensitic transformations, many features of the bainitic transformation are not yet understood
and this project addresses this issue. The research will be focused on modern bainitic microalloyed steels based on those for pipeline applications having a
clear need for optimization. An extensive test programme will involve hot rolling simulation, laboratory and industrial rolling. The experimental approach
will complement metallographic observations, measurements of mechanical properties and accumulated stress; an innovative method of determining
austenite strengthening due to incomplete recrystallisation during rolling.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Dr. Sebastian COBO
Direct line: +(33) 3/87 70 47 46
Direct fax: +(33) 3/87 70 47 12
e-mail: sebastian.cobo@arcelormittal.com
(P)
CSIC
Responsible: Dr. Sebastian MEDINA
Direct line: +(34) 91/553 89 00
Direct fax: +(34) 91/534 47 25
METALURGICAS
Department: Head of Hot Deformation Group
e-mail: smedina@cenim.csic.es
ES-28040 MADRID
(P)
UNIV OULU
Direct line: +(358) 8/55 32 140
Direct fax: +(358) 8/55 32 165
FI-90401 OULU
(P)
AGDH
Responsible: Dr.-Ing. Georg KALLA
Organisation: AGDH
Direct line: +(49) 6831/473369
Direct fax: +(49) 6831/4793400
HÜTTENWERKE
e-mail: georg.kalla@dillinger.biz
166
Contract N°
RFSR-CT-2006-00025
Reference N°
TGS6.08/06
1.677.657 1.006.595
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 31/12/2009
Title: Hydrogen embrittlement and delayed fracture of advanced multiphase high-strength steels
Acronym CHARGE&LOAD
:
Hydrogen embrittlement (HE) of multiphase high-strength steels is investigated. The aim is to gain fundamental understanding of the relation between the
strength, microstructure, hydrogen solubility and diffusion and the mechanisms of HE. Furthermore, the influence of the application environment is studied
by carrying out mechanical testing at different loading conditions (strain rate, temperature, deformation path, etc.). In order to study the strain localisation
and crack formation mechanisms related to HE, in-situ EBSD analysis will be performed in FESEM during plastic deformation. Based on the results,
guidelines to avoid HE will be composed for steel manufacturers and end-users.
State of progress:
Partners
(CO)
OCAS
Responsible: Dr. Lode DUPREZ
Organisation: OCAS
Direct line: +(32) 9/345 13 52
Direct fax: +(32) 9/345 12 04
e-mail: lode.duprez@arcelormittal.com
BE-9060 ZELZATE
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80 95 783
Direct fax: +(49) 241/80 92 224
DE-52072 AACHEN
(P)
OUTOKUMPU STAINLES
Responsible: Mr Mats LILJAS
Direct line: +(46) 226/810 93
Direct fax: +(46) 226/810 77
e-mail: mats.liljas@outokumpu.com
Department: Technology
SE-77422 AVESTA
(P)
TKS
Responsible: Dr.-Ing. Gerd SUSSEK
Organisation: TKS
Direct line: +(49) 203/524 41 93
Direct fax: +(49) 203/524 32 54
e-mail: gerd.sussek@thyssenkrupp.com
Department: Forschung, Zentrales Qualitätwesen und Prüftechnik
DE-47166 DUISBURG
(P)
HUT
Responsible: Prof. Hannu HÄNNINEN
Organisation: HUT
Direct line: +(358) 9/451 35 30
Direct fax: +(358) 9/451 35 37
HELSINKI UNIVERSITY OF TECHNOLOGY TEKNILLINEN KORKEAKOULU
Address: Otakaari 1
e-mail: hannu.hanninen@tkk.fi
FI-02015 ESPOO
167
(P)
VOEST-ALPINE
Responsible: Dipl.Ing. Klemens MRACZEK
Direct line: +(43) 732/6585 44 77
Direct fax: +(43) 732/6980 44 77
e-mail: klemens.mraczek@voestalpine.com
AT-4020 LINZ
Contract N°
RFSR-CT-2007-00020
Reference N°
TGS6.01/07
1.905.613 1.143.368
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Electrical steel with improved "core loss" due increasing of resistivity and low magnetostriction by Al and Si deposition
on surface and subsequent solid state diffusion
Acronym ELEXIR
:
FeSi steels are used as magnetic core in Electrical machines (motors, generators and transformers). An increasing of their electric resistivity would be
advantageous for power loss as heat dissipation during the magnetization process. A research project is proposed, where such increasing of resistivity is
realized by the deposition on the surface of the steel, already at final thickness, of increasing resistivity element such as Si and Al, and subsequent diffusion
annealing to homogenize the distribution of such elements. The increasing of Al and Si concentration will also decrease the magnetostriction related to the
noise produced by transformers.
After a first laboratory phase, where the amount of the diffused elements as well as the microstructure and texture of the substrate are optimized an
industrial feasibility study is proposed in order to understand the actual possibility of industrialization.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Stefano CICALE
Organisation: CSM
Direct line: +(39) 074/448 72 12
Direct fax: +(39) 074/447 09 27
e-mail: s.cicale@c-s-m.it
IT-05100 TERNI
(P)
TKS
Responsible: Dipl Phys Karl TELGER
Organisation: TKS
Direct line: +(49) 231/508 51655
Direct fax: +(49) 231/508 51067
e-mail: karl.telger@thyssenkrupp.com
Address: 935 BNO-Produktentwicklung
DE-44706 BOCHUM
(P)
UGENT
Responsible: Prof. Dr -Ing Yvan HOUBAERT
Organisation: RUG
Direct line: +(32) 9/264 57 62
Direct fax: +(32) 9/264 58 33
RUG
e-mail: yvan.houbaert@ugent.be
Department: Deparment of Metallurgy and Materials Science
Address: Technologiepark 9
BE-9052 ZWIJNAARDE
(P)
TU BA
Organisation: TU BA
Direct line: +(49) 3731/39 24 79
Direct fax: +(49) 3731/39 36 56
DE-09596 FREIBERG
168
(P)
OCAS
Responsible: Dr Marc DE WULF
Direct line: +(32) 9/345 13 53
Organisation: OCAS
Direct fax: +(32) 9/345 12 04
Department: Program Manager Electrical Steel
e-mail: marc.dewulf@arcelormittal.com
BE-9060 ZELZATE
Contract N°
RFSR-CT-2007-00021
Reference N°
TGS6.02/07
1.320.289
792.174
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Development of methods for the characterization, fracture assessment and life prediction of new high strength steel under
variable temperature operating conditions
Acronym DELOC
:
This project aims at understanding the TMF behaviour in advanced steels and weldments by developing fracture mechanics based model. Proposal will
cover a survey of isothermal and thermo-mechanical fatigue (TMF). For new high chrome steels and their weldments the effects of TMF and residual
stresses on defects need to be established, modelled and validated since only limited data and the corresponding modelling of the behaviour for TMF tests
exist. The programme covers a plan for deriving high temperature properties as well as LCF, TMF tests on cracked and uncracked components. The results
and the models will be validated and included in a new life assessment methodology.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Augusto DI GIANFRANCESCO
Organisation: CSM
Direct line: +(39) 06/505 52 75
Direct fax: +(39) 06/505 54 52
e-mail: a.digianfrancesco@c-s-m.it
IT-00128
(P)
IMPERIAL COLLEGE
Responsible: Prof. Kamran NIKBIN
Direct line: +(44) 207/594 71 33
Direct fax: +(44) 207/594 70 17
Department: Structural Integrity
e-mail: k.nikbin@imperial.ac.uk
GB- LONDON SW7 2AZ
(P)
ANSALDO ENERGIA
Responsible: Ing Vincenza D'AURIA
Organisation: ANSALDO ENERGIA
Direct line: +(39) 010/655 36 36
Direct fax: +(39) 010/655 58 01
ANSALDO ENERGIA S.p.A.
e-mail: vincenza.dauria@aen.ansaldo.it
Department: Turbine Materials
Address: via N. Lorenzi 8
IT-16152 GENOVA
(P)
ISQ
Responsible: Dr. Manuel GOMES
Organisation: ISQ
Direct line: +(351) 21/422 90 26
Direct fax: +(351) 21/422 81 26
e-mail: magomes@isq.pt
Department: Laboratory for Mechanical Behaviour (LABMEC)
Talaide
169
(P)
SDF
Responsible: Dr Eng Stefano NERI
Direct line: +(39) 07/44 48 82 87
Organisation: SDF
Direct fax: +(39) 07/44 48 82 20
SOCIETA DELLE FUCINE SRL
e-mail: stefano.neri@thyssenkrupp.com
Department: Metallurgy, Cycles and NDT
IT-05100 TERNI
Contract N°
RFSR-CT-2007-00022
Reference N°
TGS6.03/07
1.337.469
802.482
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Design of bainite in steels from homogeneous and inhomogeneous microstructures using physical approaches
Acronym Bainite Design
:
There are no satisfying empirical models and only physically based models for special steels available. The aim of the project is to find in literature those
formulations of physically based approaches that are most promising. By extensive use of computational thermodynamics and kinetics these approaches
will be placed on a broader basis and will be fitted to new experimental data. So the development of bainitic microstructures in complete groups of modern
bainitic- and cold rolled TRIP-, CP-, and DP-steels can be calculated. The use of the new approach will allow designing bainitic structures for improved
material properties and will give information about basic physical processes governing the formation of bainite.
State of progress:
Partners
(CO)
TKS
Responsible: Dr Rolf GROSSTERLINDEN
Organisation: TKS
Direct line: +(49) 203/52-45520
Direct fax: +(49) 203/52-25938
e-mail: rolf.grossterlinden@thyssenkrupp.com
Department: 360 Werkstoffkompetenzzentrum (360WSK-W-S)
DE-47161 DUISBURG
(P)
CEIT
Responsible: prof. Dr Javier GIL SEVILLANO
Organisation: CEIT
Direct line: +(34) 943/212 800
Direct fax: +(34) 943/213 076
e-mail: jgil@ceit.es
Barrio de Ibaeta
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80 95 783
Direct fax: +(49) 241/80 92 224
DE-52072 AACHEN
(P)
UNIV THESSALY
Responsible: Prof. Gregory N. HAIDEMENOPOULOS
Organisation: UNIV THESSALY
Direct line: +(30) 242/107 40 62
Direct fax: +(30) 242/107 40 61
UNIVERSITY OF THESSALY - MATERIALS
LABORATORY
Department: Laboratory of Materials
Address: Pedion Areos
e-mail: hgreg@mie.uth.gr
GR-38334 VOLOS
170
(P)
VOEST-ALPINE
Responsible: Dr. Thomas HEBESBERGER
Direct line: +(43) 70/6585 77132
Direct fax: +(43) 70/6980 4338
e-mail: thomas.hebesberger@voestalpine.com
Department: B3E, Research and Development
AT-4031 LINZ
Contract N°
RFSR-CT-2007-00023
Reference N°
TGS6.04/07
1.906.904 1.144.142
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Bainitic hardenability - Effective use of expensive and strategically sensitive alloying elements in high strength steels
Acronym BAINHARD
:
Modern bainitic steels derive their favourable properties, from a mixture of ultra-fine bainitic ferrite with evenly distributed second phases. In order to
obtain the desired bainitic microstructure, alloying elements must be used to separate the bainitic C-curve to make it easier to obtain the desired
microstructure on cooling. The selection of alloying elements is difficult, as bainitic hardenability has not been studied as extensively as martensitic
hardenability. This project will develop a new “bainitic hardenability” model for optimum selection and flexible replacement of expensive or strategically
sensitive alloying elements in high and ultra-high strength steels.
State of progress:
Partners
(CO)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 84
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
ARCELOR RESEARCH
Responsible: Mrs Gwenola HERMAN
Direct line: +(33) 3/87 70 47 48
Direct fax: +(33) 3/87 70 47 12
e-mail: gwenola.herman@arcelormittal.com
(P)
CRM
Responsible: Dr Christophe MESPLONT
Organisation: CRM
Direct line: +(32) 9/264 57 72
Direct fax: +(32) 9/264 58 34
ASBL
e-mail: mesplont@agt0.ugent.be
(P59)
BE-4000 LIEGE
(P)
CORUS UK
Responsible: Dr Peter F. MORRIS
Direct line: +(44) 1709/825 327
Direct fax: +(44) 1709/855 337
CENTRE
e-mail: peter.f.morris@corusgroup.com
Rotherham
171
(P)
IMZ
Responsible: Dr Roman KUZIAK
Direct line: +(48) 32/234 52 41
Organisation: IMZ
Direct fax: +(48) 32/234 53 03
INSTYTUT METALURGII ZELAZA IM.
STANISLAWA STASZICA
Department: Laboratory
Address: ul. Karola Miarki 12-14
e-mail: rkuziak@imz.gliwice.pl
PL-44100 GLIWICE
(P)
SZMF
Responsible: Mr Norbert KWIATON
Direct line: +(49) 5341/21 3440
Organisation: SZMF
Direct fax: +(49) 5341/21 3816
GmbH
e-mail: n.kwiaton@sz.szmf.de
DE-38239 SALZGITTER
(P)
SIDENOR I+D
Responsible: Mr Roberto ELVIRA EGUIZABAL
Direct line: +(34) 94/487 16 24
Direct fax: +(34) 94/487 18 44 81
S.A.
e-mail: roberto_elvira@sidenor.com
Contract N°
RFSR-CT-2007-00024
Reference N°
TGS6.05/07
1.815.098 1.089.058
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Optimisation of themetallurgical structures and mechanical properties by improving the heat-treatment processes in flat
and long production lines with new setup and control methods
Acronym ESTEP OPTIMET
:
The objective of this project is to establish best microstructure and mechanical properties of rolled flat and long products to anticipate future market
demands. This will be achieved by optimising the heating and cooling processes in the finishing area, based on offline and online measurement systems,
integrated models for temperature and microstructure evolution combined to predict the material properties , and model-predictive control technologies first
applied in this area. Major cost savings for European steel industry will result from deduction of sampling, lab testing, elimination of reprocessing, and
downgrading due to poor mechanical properties.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl - Ing Andreas WOLFF
Direct line: +(49) 211/6707 250
Direct fax: +(49) 211/6707 310
e-mail: andreas.wolff@bfi.de
(P)
MEFOS
Responsible: Dr John NISKA
Organisation: MEFOS
Direct line: +(46) 920/20 19 86
Direct fax: +(46) 920/25 50 59
INSTITUTE AB
e-mail: john.niska@mefos.se
SE-97125 LULEÅ
172
(P)
SIDENOR I+D
Direct line: +(34) 94/487 18 96
Direct fax: +(34) 94/487 18 44
S.A.
(P)
TU BA
Organisation: TU BA
Direct line: +(49) 3731/39 24 79
Direct fax: +(49) 3731/39 36 56
DE-09596 FREIBERG
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
173
Contract N°
RFS1-CT-2008-00020
Reference N°
TGS6.01/08
189.500
20.000
Duration
Dates:
3 (Mths)
Starting
Ending
Actual
1/06/2008 30/06/2008 31/08/2008
Title: 6th European stainless steel conference, science and markets
The 6th European Stainless Steel Conference, in June 10-13, 2008 in Helsinki, Finland, is devoted both to the scientific aspects of stainless steels and their
market issues. The objectives for the conference is to be a meeting place for specialists, both industry and academic sectors, from the European Union and
abroad, involved in new growing steel applications and in research and development. Meetings between these groups have proved to be a seed for the
fruitful and successful development of manufacturing processes, new steel
grades and new applications for stainless steels. Within this frame the diffusion of results also gained on some research projects funded by the Research
Fund for Coal and Steel is assured.
The conference will address the specific issues and role of stainless steels in meeting the challenge of the modern society, particularly in terms of
sustainability. Issues addressed will include the consequences of restricted availability of specific alloying elements (leading to alloy substitution), newly
developed grades,
improvement of current austenitic, ferritic, martensitic, duplex and new high-Mn and duplex steel grades, and the demand for modified and innovative
production routes. User concerns, including improved performance in terms of welding, corrosion and forming, will also be important.
Europe has until now been the leader in the production of stainless steel. China is, however, now coming as a strong player into this field. They will soon
have some of the biggest stainless steel works in the world. In order to support the competitiveness of the European stainless steel industry and to keep its
leading position, we must even more strengthen our research and in close contact with the market, our customers, develop the niche products they need.
This conference offers a good opportunity for dissemination of the results of our research and also to discuss with our customers their needs for future
products.
The conference will cover both fundamental and applied aspects of stainless steels, in the following topics:
• Applications and service experience of stainless steel
• New trends in stainless steel processing
• Fabrication technology
• Surface treatment and surface properties of stainless steel
• Modelling of microstructures and properties
• Corrosion, testing and performance, with and without load
• Guidelines and standards
The conference theme and papers are in good accordance with the objectives and scientific/technical and socio-economic priorities of the Research Fund
for Coal and Steel, as they “…increase competitiveness and contribute to sustainable development… the development of new or improved technologies to
guarantee the economic, clean and safe production of steel and steel products characterised by steadily increasing performance, suitability to use, customer
satisfaction, prolonged service life, easy recovery and recycling.”
Many of the conference papers also covers the current priorities of the Strategic Research Agenda of the European Steel Technology Platform (ESTEP),
quoted in the RFCS Information Package 2007 The conference is organized by Jernkontoret and sponsored by most of the leading companies in this filed in
Europe:
Outokumpu, Sandvik Materials Technology, ESAB, ThyssenKrupp Nirosta, ThyssenKrupp Acciai Speciali Terni, UGINE & ALZ, Nickel Institute, IMOA,
International Chromium Development Association and Euro Inox.
Details can be found on the conference web site www.stainless08.com
The conference is the latest in a successful series of international conferences
* Florence in 1993
* Düsseldorf in 1996,
* Sardinia in 1999,
* Paris in 2002
* Seville in 2005.
In 2007 some conferences were held, with names rather similar to this conference. They however were concentrated on other aspects:
3rd International Conference ‘Stainless Steel Markets 2007’ in Moscow, in September.
That conference is mainly devoted to market, meaning in this connection financing and statistics. Science and technical research, as in our conference, is
not on the agenda.
Stainless Steel World Conference 2007 in Maastricht in November is a purely commercial yearly event, mainly devoted to the application oriented
technique and will not cover science as in our conference.
State of progress:
Partners
(MC)
JERNKONTORET
Responsible: Prof Staffan HERTZMAN
Direct line: +(46) 226/810 00
Organisation: JERNKONTORET
Fax: +(46) 8/611 20 89
JERNKONTORET IDEELLA FÖRENINGAR
e-mail: staffan.hertzman@outokumpu.com
Address: Kungsträdgårdsgatan,10
SE-111 87 STOCKHOLM
174
Contract N°
RFSR-CT-2008-00021
Reference N°
TGS6.02/08
1.480.262
888.157
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: New advanced ultra high strength bainitic steels: ductility and formability
Acronym DUCTAFORM
:
The main objective of this proposal is to develop advanced ultra high strength (UHS) hot rolled sheet steels with an optimum ductility and a suitable
bending behaviour, and annealed cold rolled sheet steels with a good combination of work hardening and stretch flangeability. The tough bainitic ferrite
matrix and the heterogeneities in phases’ hardness for this microstructure will allow reaching the most favourable combination of drawability/stretch
formability/bendability
in these steels. For this purpose, an innovative concept based on theory alone will be followed to design the alloy composition and suitable control
processing of advanced bainitic steel sheets.
Likewise, forming processes such as continuous shaping and hardening, and press-hardening will be optimised to achieve a fully carbide free bainitic
structure in final products such as structural safety components in the car body i.e. A-beam, roof-beams, car bumpers and side impact beams.
State of progress:
Partners
(CO)
CSIC
Responsible: Dr Francisca GARCIA CABALLERO
Direct line: +(34) 91/553 89 00
Direct fax: +(34) 91/534 74 25
METALURGICAS
e-mail: fgc@cenim.csic.es
ES-28040 MADRID
(P)
ARCELOR RESEARCH
Responsible: Dr. Sébastien ALLAIN
Direct line: +(33) 3/87 70 47 47
Direct fax: +(33) 3/87 70 47 12
e-mail: sebastien.allain@arcelormittal.com
(P)
LTU
Responsible: Prof Lars-Erik LINDGREN
Organisation: UNIV LULEA
Direct line: +(46) 920/49 13 06
Direct fax: +(46) 920/49 10 84
LULEA UNIVERSITY OF TECHNOLOGY - DPT
OF HUMAN WORK SCIENCES
Department: Engineering Materials
Address: Regnbagsallen
e-mail: lars-erik.lindgren@ltu.se
SE-97187 LULEA
(P)
GESTAMP
Responsible: Mrs Katarina LINDSTRÖM
Organisation: GESTAMP
Direct line: +(46) 920/47 42 08
Direct fax: +(46) 920/25 47 76
GESTAMP HARDTECH AB
e-mail: katarina.lindstrom@hardtech.gestamp.com
Address: Ektjärnsvägen 5
SE-971 25 LULEÅ
(P)
L+W
Responsible: Dr -Ing Eike Gerhard GÜCKER
Organisation: L+W
Direct line: +(49) 2771/382 280
Direct fax: +(49) 2771/392 280
LINDE + WIEMANN GMBH
e-mail: e.guecker@linde-wiemann.com
Department: Innovation Technology
Address: Industriestrasse 4-12
DE-35683 DILLENBURG
175
(P)
RUUKKI
Responsible: Dr. Jukka KÖMI
Direct line: +(358) 2059/223 58
Direct fax: +(358) 2059/231 01
RAUTARUUKKI OYJ
e-mail: jukka.komi@ruukki.com
Department: Corporate R&D
FI-92101 RAAHE
Contract N°
RFSR-CT-2008-00022
Reference N°
TGS6.03/08
1.655.995
993.597
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Novel nanostructured bainitic steel grades to answer the need for high performance steel components
Acronym NANOBAIN
:
The aim of the proposed project is to investigate the properties (in particular, wear and fatigue resistance) of a virtually new class of steel grades based on a
new class of microstructures: nanostructured bainite.
These microstructures are the product of recent developments at the University of Cambridge and CENIM, and are obtained by applying modified
bainitizing heat-treatments on steels of carefully designed compositions.
Where tested, these 'nanobainitic' steels have demonstrated outstanding mechanical properties, although complex mechanical properties (notably wear and
fatigue) remain to explore. These steels will allow for a true leap forward in the area of ecological and economical high performance steel grades.
State of progress:
Partners
(CO)
ASCOMETAL
Responsible: Dr.-Ing. Thomas SOURMAIL
Organisation: ASCOMETAL
Direct line: +(33) 3/87 70 73 16
Direct fax: +(33) 3/87 70 73 56
ASCOMETAL CREAS
e-mail: t.sourmail@ascometal.lucchini.com
Department: Metakkurgy Dpt
Address: BP 70045
FR-57301 HAGONDANGE
(P)
ALD-VT AG
Responsible: Dr.-Ing. Volker HEUER
Organisation: ALD-VT AG
Direct line: +(49) 6181/307 3372
Direct fax: +(49) 6181/307 3260
ALD VACUUM TECHNOLOGIES AG
e-mail: dr.volker.heuer@ald-vt.de
Address: Wilhem-Rohn-Straße 35
DE-63450 HANAU
(P)
BOSCH
Responsible: Dr -Ing Jochen SCHWARZER
Organisation: BOSCH
Direct line: +(49) 711/811 207 35
Direct fax: +(49) 711/811 511 38 39
ROBERT BOSCH GmbH
e-mail: jochen.schwarzer@de.bosch.com
Address: Robert Bosch Straße 2
DE-71701 SCHWIEBERDINGEN
(P)
CSIC
Responsible: Dr Francisca GARCIA CABALLERO
Direct line: +(34) 91/553 89 00
Direct fax: +(34) 91/534 74 25
METALURGICAS
e-mail: fgc@cenim.csic.es
ES-28040 MADRID
176
(P)
LTU
Responsible: Prof Braham PRAKASH
Direct line: +(46) 920/493 055
Organisation: LTU
Direct fax: +(46) 920/492 228
LULEÅ UNIVERSITY OF TECHNOLOGY
e-mail: braham.prakash@ltu.se
Department: Tribolab
Address: Universitetsområdet, Porsön
SE-97187 LULEÅ
(P)
METSO
Responsible: Ph.D. Pekka SIITONEN
Direct line: +(358) 40/537 88 40
Organisation: METSO
Direct fax: +(358) 2048/41 21
METSO MINERALS OY
e-mail: pekka.siitonen@metso.com
Address: Fabianinkatu 9A
FI-00101 HELSINKI
(P)
SIDENOR I+D
Direct line: +(34) 94/487 17 98
Direct fax: +(34) 94/487 18 44
S.A.
Contract N°
RFSR-CT-2008-00023
Reference N°
TGS6.04/08
1.893.470 1.136.083
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/10/2008 30/09/2011 30/09/2011
Title: Novel rolling methods for advanced high strength hot rolled steels
Acronym ROLLINGHASS
:
Wide steel research efforts are being directed to develop new-generation, high-performance steels (AHSS), particularly those having ultra-high strength
with good ductility, finding many applications in automotive industry, building and construction sector, etc. The target in preceding researches has been the
innovative processing of steels, utilizing thermodynamic calculations and physical metallurgy principles for novel chemical composition design, modeling,
and sophisticated hot working and dedicated heat treatments throughout the strictly controlled manufacturing stage. Furthermore, uniform properties and
good flatness of plates and sheets are also targeted by strict control of processing at laboratory and industrial scale. In the proposed research the focus will
be directed on the evaluation and optimization of the challenging rolling phenomena and methods to enable fabrication of thin advanced hot rolled high
strength steels (AHSS) in the production scale with good strip flatness and excellent profile minimizing cobble risk.
State of progress:
Partners
(CO)
FUNDACION LABEIN
Responsible: Mr José Ignacio BARBERO
Direct line: +(34) 94/60 73 300
Direct fax: +(34) 94/60 73 349
FUNDACION LABEIN
e-mail: jose@labein.es
ES-48160 DERIO
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
177
(P)
VDEH-BFI
Responsible: Dipl -Ing Volker DIEGELMANN
Direct line: +(49) 211/6707-348
Direct fax: +(49) 211/6707 923
e-mail: volker.diegelmann@bfi.de
Department: R&D
(P)
CSM
Responsible: Dr. Filippo PLACIDI
Direct line: +(39) 06/505 53 38
Organisation: CSM
Direct fax: +(39) 06/505 54 52
e-mail: f.placidi@c-s-m.it
Department: Components Engineering and Forming
IT-00128
(P)
MEFOS
Responsible: MSc Mats KARLBERG
Direct line: +(46) 920/200 230
Organisation: MEFOS
Direct fax: +(46) 920/255 059
INSTITUTE AB
e-mail: mats.karlberg@mefos.se
SE-97125 LULEÅ
(P)
UNIV OULU
Responsible: Prof. Dr Pekka MÄNTYLÄ
Direct line: +(358) 8/553 21 45
Direct fax: +(358) 8/553 21 65
Department: Mechanical Engineering
e-mail: pekka.mantyla@oulu.fi
FI-90401 OULU
Contract N°
RFSR-CT-2008-00024
Reference N°
TGS6.05/08
1.976.202 1.185.722
Duration
Dates:
48 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2012 30/06/2012
Title: New creep resistant stable steel for USC power plant
Acronym CRESTA
:
The new Ultra SuperCritical coal-fired power plants will have several steel components (waterwalls, superheaters, steam-line and turbine) operating at
temperatures range 600-650°C. In the next generation with higher steam parameters (700-720°C/350bar) waterwalls will reach up to 600°C metal
temperatures, leading to higher corrosion, oxidation and creep loads. Considering recent creep stability breakdowns of current 12% Cr steels, the remaining
options are the use of already developed 9%Cr steels with Post Weld Heat Treatment, complicated and more expensive, or the nickel base superalloys with
10 times
higher cost, affecting seriously the overall plant economy. The proposal aims at developing a new low cost steel grade able to work at the above mentioned
conditions.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Augusto DI GIANFRANCESCO
Organisation: CSM
Direct line: +(39) 06/505 52 75
Direct fax: +(39) 06/505 54 52
e-mail: a.digianfrancesco@c-s-m.it
IT-00128
178
(P)
DONG
Responsible: Prof John HALD
Organisation: DONG
Direct line: +(45) 4525/2199
Direct fax: +(45) 4593/6213
DONG ENERGY GENERATION AS*DANKRAFT
AS ELSAM INT AS ELSAM ENG AS
Address: Kraftvaerksvej 53 Skaerbaek
e-mail: jhald@dongenergy.dk; joh@ipl.dtu.dk
DK-7000 FREDERICIA
(P)
TECH UNIV GRAZ
Responsible: Dipl Ing Dr Tec Peter MAYR
Organisation: TU GRAZ
Direct line: +(43) 316/873 7186
Direct fax: +(43) 316/873 7187
TECHNISCHE UNIVERSITÄT GRAZ
e-mail: peter.mayr@tugraz.at
Address: Kopernikusgasse, 24
AT-8010 GRAZ
(P)
AIR LIQUIDE
Responsible: Dr Corinne CHOVET
Direct line: +(33) 1/34 21 33 46
Direct fax: +(33) 1/34 21 30 34
AIR LIQUIDE - CTAS
e-mail: corinne.chovet@airliquide.com
Address: 13, rue d'Epluches
FR-95310 ST-OUEN-L'AUMONE
(P)
DALMINE
Responsible: Ing Stefano CAMINADA
Organisation: DALMINE
Direct line: +(39) 035/560 4145
Direct fax: +(39) 035/560 4002
DALMINE SPA
e-mail: scaminada@tenaris.com
IT-24044 DALMINE (BERGAMO)
(P)
ALSTOM
Responsible: Dr Qiurong CHEN
Direct line: +(49) 711/917 1834
Direct fax: +(49) 711/917 1239
ALSTOM POWER SYSTEMS GmbH
e-mail: qiurong.chen@power.alstom.com
Address: 712 Ausburgerstrasse
DE STUTTGART
(P)
INDUSTEEL
Responsible: Dr Sylvain PILLOT
Organisation: INDUSTEEL
Direct line: +(33) 3/85 80 58 62
Direct fax: +(33) 3/85 80 59 55
INDUSTEEL FRANCE - CRMC
e-mail: sylvain.pillot@arcelormittal.com
Address: USINE DU CREUSOT
56, rue Clémenceau
FR-71200 LE CREUSOT
179
Contract N°
RFSR-CT-2008-00025
Reference N°
TGS6.06/08
1.186.510
711.906
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Electrical steel with improved magnetic characteristics by asymmetric hot and cold rolling
Acronym ASYLECTRO
:
Non Oriented Electrical Steels (NGO) strips are used to build the magnetic cores of rotating electric machines. Market requirements, driving product
development, mainly concern ratio between product-cost/magnetic-properties, as well as geometric characteristics of the sheets, which influences
manufacturing costs and core tolerances .
It is intended to develop new NGO grades with improved characteristics and/or drastic reduction of production costs. Such a target will be reached by
designing and optimising innovative processing routes based on Asymmetric Hot and/or Cold Rolling to obtain magnetically favourable texture and
microstructure on the finished products. A program of experimental simulation of the thermo mechanical cycles for the new products starting from
laboratory ingots and industrial rough bars will be strongly linked to a parallel program of theoretical modeling to study texture/microstructure evolution as
well as modeling devoted to study the technological aspects of asymmetric rolling of Fe-Si. A critical assessment of industrial feasibility of the routes to
produce the new products will be done.
State of progress:
Partners
(CO)
CSM
Responsible: Dr. Stefano CICALE
Organisation: CSM
Direct line: +(39) 074/448 72 12
Direct fax: +(39) 074/447 09 27
e-mail: s.cicale@c-s-m.it
IT-05100 TERNI
(P)
TU DELFT
Responsible: Prof. Dr. Ir. Leo KESTENS
Direct line: +(31) 15/27 84 353
Direct fax: +(31) 15/27 86 730
DELFT UNIVERSITY OF TECHNOLOGY ENERGY TECHNOLOGY
Address: Mekelweg 2
e-mail: l.a.i.kestens@tudelft.nl
NL-2628 CD DELFT
(P)
VOEST-ALPINE
Responsible: Dipl.-Ing. Johann SPERL
Direct line: +(43) 503/04 15 8037
Direct fax: +(43) 503/04 15 4338
e-mail: johann.sperl@voestalpine.com
AT-4020 LINZ
(P)
DANIELI & C
Responsible: Dr. Eng. Milorad PAVLICEVIC
Organisation: DANIELI & C
Direct line: +(39) 04/32 59 87 91
Direct fax: +(39) 04/32 59 88 34
DANIELI & C. OFFICINE MECCANICHE SPA
e-mail: m.pavlicevic@danieli.it
Address: Via Nazionale 41
IT-33042 BUTTRIO
180
Contract N°
RFSR-CT-2008-00026
Reference N°
TGS6.07/08
1.658.365
995.019
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Optimal strength control by individual strip related tuning of cooling processes in the hot rolling area based on models
and in-line strength measurements
Acronym StrengthCONTROL
:
The aim of this project is to produce significant smaller material parameter deviations over the whole strip length in hot strip mills. For this purpose a new
strength optimisation system is developed, which adapts the setup of the run-out table cooling strip-by-strip and meter-by-meter. Basis of the adaptation are
the
online material parameter measurement and an iterative learning control concept. Higher yield, less costs for tensile testing, and a strength guaranteed along
the total strip length will be achieved. To reduce scale and processing time a fast coil cooling strategy will be investigated. Furthermore, a new cooling
system
will be developed to perform an additionally controlled width adaptable cooling at the coiler.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr -Ing Jan POLZER
Direct line: +(49) 211 6707 241
Direct fax: +(49) 211 6707 923 241
e-mail: jan.polzer@bfi.de
Department: R&D
(P)
MEFOS
Responsible: MSc Mats KARLBERG
Organisation: MEFOS
Direct line: +(46) 920/200 230
Direct fax: +(46) 920/255 059
INSTITUTE AB
e-mail: mats.karlberg@mefos.se
SE-97125 LULEÅ
(P)
CRM
Responsible: Dr. Harald ESPENHAHN
Telephone: +(39) 0744/49 01
Organisation: TKAST
Fax: +(39) 0744/49 07 52
e-mail:
IT-05100 TERNI
(P)
EMG
Responsible: Dr rer nat Klaus HERMANN
Organisation: EMG
Direct line: +(49) 2762/612 421
Direct fax: +(49) 2762/612 384
EMG AUTOMATION GMBH
e-mail: klaus.hermann@emg-automation.com
DE-57482 WENDEN
(P)
HHO
Responsible: Ing Peter HÖFEL
Organisation: HHO
Direct line: +(49) 2334/91 2229
Direct fax: +(49) 2334/91 2760
HOESCH HOHENLIMBURG GmbH
e-mail: peter.hoefel@thyssenkrupp.com
Address: Oeger Strasse, 120
DE-58119 HAGEN
181
Contract N°
RFSR-CT-2008-00027
Reference N°
TGS6.08/08
1.341.862
805.117
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Micro-scale damage tolerance of AHSS steels as function of microstructure and stress/strain state
Acronym MICRODAMAGE
:
Complex sheet forming introduces a significant amount of prestrain to AHS-steels and may generate a number of voids or even micro-cracks in microdamage sensitive microstructures. Forming itself is considered successful when no visible cracks develop on the surface. It is important to recognise the
response of different AHSS microstructures on forming prestrain and how such “damaged”
microstructures sustain the external stresses during service.
This project will develop a new criterion for micro-scale damage tolerance based on the effect of prestrain on development of voids, their growth and final
fracture, and used this criterion as a new method for evaluating formability.
State of progress:
Partners
(CO)
KIMAB
Responsible: M.Sc. Lena RYDE
Organisation: KIMAB
Direct line: +(46) 8/440 48 81
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: lena.ryde@swerea.se
Department: Cold Processing
SE-11428 STOCKHOLM
(P)
ITMA
Responsible: Mr Jose Manuel ARTIMEZ
Organisation: ITMA
Direct line: +(34) 985/129120
Direct fax: +(34) 985/129008
FUNDACION ITMA
e-mail: j.artimez@itma.es
Department: Development of Steel and Aluminium Alloys Group
Address: Edificio ITMA, Parque Tecnológico de Asturias, S/N
Lugo de Llanera
ES-33428 LLANERA
(P)
SSAB
Responsible: Mr Anders HAGLUND
Organisation: SSAB
Direct line: +(46) 243/713 63
Direct fax: +(46) 243/715 48
SSAB TUNNPLÅT AB
e-mail: anders.haglund@ssab.com
Department: Assistant Manager Product Development
Address:
SE-78184 BORLÄNGE
(P)
TUM
Responsible: Prof. Dr. Ewald A. WERNER
Organisation: TUM
Direct line: +(49) 89/289 152 47
Direct fax: +(49) 89/289 152 48
TECHNISCHE UNIVERSITÄT MÜNCHEN
e-mail: werner@wkm.mw.tum.de
Address: Boltzmannstraße 15
DE-85747 GARCHING
(P)
VOEST-ALPINE
Responsible: Dr Andreas PICHLER
Direct line: +(43) 50304/15 75092
Direct fax: +(43) 50304/55 4338
e-mail: andreas.pichler@voestalpine.com
AT-4020 LINZ
182
Technical Group TGS7 :"Steel products and applications for automobiles, packaging and home
appliances"
Contract N°
RFSR-CT-2005-00032
Reference N°
TGS7.1/05
1.525.470
915.282
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Load spectrum lightening of fatigue tests data for time reduction of design validation
Acronym SpeedFat
:
The purpose is to develop filtering procedures in order to shorten fatigue loading spectrum without changing the damage and so accelerate tests and final
validation of structures.
Oriented to High Strength Steel and automotive industries, final results will be also valid for other applications. Filtering procedures have to consider
microstructural aspects in order to show the interest of HSS on the filtering level. 75% of time reduction can be expected depending on loading.
Dealing with fatigue design, safety and sustainable development can be associated to this proposal.
A European recommendation could be an outlook of this scientific works achievement.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Dr. Bastien WEBER
Direct line: +(33) 3/87 70 42 66
Direct fax: +(33) 3/87 70 47 14
e-mail: bastien.weber@arcelormittal.com
(P)
SIDENOR I+D
Direct line: +(34) 94/487 17 98
Direct fax: +(34) 94/487 18 44
S.A.
(P)
REGIENOV
Responsible: Dr. Eric VAILLANT
Organisation: REGIENOV RENAULT
Direct line: +(33) 1/76 83 36 52
Direct fax: +(33) 1/76 85 09 63
REGIENOV-RENAULT RECHERCHE
INNOVATION
Department: Fatigue & Fracture
Address: Avenue du Golf 1
e-mail: eric.vaillant@renault.com
FR-78288 GUYANCOURT
(P)
IMA DRESDEN
Responsible: Mrs Anett WUENSCHE
Organisation: IMA DRESDEN
Direct line: +(49) 351/8837 259
Direct fax: +(49) 351/8837 517
IMA MATERIALFORSCHUNG UND
ANWENDUNGSTECHNIK GmbH
Address: Wilhelmine-Reichard-Ring 4
e-mail: wuensche@ima-dresden.de
DE-01109 DRESDEN
(P)
CSM
Responsible: Mr Sandro RISCIFULI
Organisation: CSM
Direct line: +(39) 06/505 5281
Direct fax: +(39) 06/505 5452
e-mail: s.riscifuli@c-s-m.it
IT-00128
183
Ext.: 296
appliances"
(P)
FUNDACION LABEIN
Responsible: Mr Jaime GRIJALVO
Direct line: +(34) 94/607 33 97
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: grijalvo@labein.es
ES-48160 DERIO
Contract N°
RFSR-CT-2005-00033
Reference N°
TGS7.2/05
1.430.342
858.205
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Improving and enlarging the application field of HSS and UHSS for automotive body components by technologies based
on roll forming and stretch bending processes
Acronym HI-PROF
:
High Strength Steels and (HSS) Ultra High Strength Steel (UHSS) offer great possibilities for weight reduction, increased safety and reduced fuel
consumption. However, serious problems are connected to production of the high strength steel parts, especially using traditional technologies (stamping,
Hydroforming), mainly related to low formability, spring back and tool wear.
The current project aims at enlarging the use of HSS and UHSS for the production of lightweight automotive components by promoting the use of
alternative processes and process chains, with higher degrees of flexibility and potentially more suitable for the production of component in UHSS: the Roll
Forming and Stretch Bending processes.
The proposal address the understanding of the roll forming and stretch bending processes capabilities for UHSS, by the in depth study of the basic
principles which dominate the forming process chain if connected with UHSS, and the enlarging of the applications by the production of clear and robust
know how and guidelines, for the manufacturing complex parts, the realisation of predictive numerical tools for process feasibility, of cost estimation tools,
and of specific formability tests.
State of progress:
Partners
(CO)
CSM
Organisation: CSM
Direct line: +(39) 06/505 53 38
Direct fax: +(39) 06/505 54 52
IT-00128
(P)
SSAB
Responsible: Dr. Tomas JANSSON
Organisation: SSAB
Direct line: +(46) 243/710 41
Direct fax: +(46) 243/715 73
SSAB TUNNPLÅT AB
e-mail: tomas.jansson2@ssab.com
tomas.jansson2@ssab.com
Department: Avd. 97UT
Address:
SE-78184 BORLÄNGE
(P)
KIMAB
Responsible: M. Sc Lars GUNNARSSON
Organisation: KIMAB
Direct line: +(46) 8/440 48 75
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: lars.gunnarsson@swerea.se
Department: Sheet Technology Group
SE-11428 STOCKHOLM
184
appliances"
(P)
ITMA
Responsible: Mr M. Armindo GUERRERO
Organisation: ITMA
Direct line: +(34) 985/129 120
Direct fax: +(34) 985/129 008
FUNDACION ITMA - CENTRO TECNOLOGICO
DEL ACERO Y MATERIALES METALICOS
Address: Parque Empresarial Ppdo. De Asturias
e-mail: armindo@itma.es
C/ Calafates - Parcela L-3,4
ES-33400 AVILES
(P)
EMARC
Responsible: Mr Massimo CERVETTI
Direct line: +(39) 011/99 35 411
Organisation: EMARC
Direct fax: +(39) 011/96 23 343
E.M.A.R.C. SpA - ENGINEERING MACCHINE
ATTREZZATURE RAP. CONS. SIG.
Department: Engineering Product
Address: Viale Piemonte 0/9
e-mail: cervetti.massimo@emarc.it
IT-10048 VINOVO
Contract N°
RFSR-CT-2005-00034
Reference N°
TGS7.3/05
1.231.309
738.785
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Prediction of microstructure and constraint effects on fatigue behaviour in engineering applications
Acronym MICROFAT
:
The proposal aims to develop an experimental and methodological know-how to establish the relationship between steel microstructure and constraint
effects and fatigue behaviour of high strength structural steels for mechanical components in terms of crack initiation/propagation phase.
The developed knowhow will be extended to real in-service conditions and identified engineering applications and components, in particular when
multiaxial random loads with overloads are Present.
A validated criterion to predict the in-service behaviour of selected mechanical components, taking account of steel microstructure, surface roughness as
well as stress-strain field, will be developed starting from state-of-the-art theories (e.g. Dang Van, Kitagawa-Takahashi, Murakami) and metallurgical
knowledge. Mechanical components production and special testing on full-scale components will be also performed. With these aims a Consortium among
CSM, SIDENOR, CEIT, ASCOMETAL and IVECO has been formed.
State of progress:
Partners
(CO)
CSM
Responsible: PhD. Dr. Paolo FOLGARAIT
Organisation: CSM
Direct line: +(39) 06/335 6682135
Direct fax: +(39) 06/505 54 61
e-mail: p.folgarait@c-s-m.it
Department: Mechanics Working Team
IT-00128
(P)
SIDENOR I+D
Direct line: +(34) 94/487 17 98
Direct fax: +(34) 94/487 18 44
S.A.
185
appliances"
(P)
CEIT
Responsible: Dr. José Manuel MARTINEZ ESNAOLA
Organisation: CEIT
Direct line: +(34) 943/212 800
Direct fax: +(34) 943/213 076
e-mail: jmesnaola@ceit.es
Barrio de Ibaeta
(P)
ASCOMETAL
Responsible: Dr.Ing. Pascal DAGUIER
Direct line: +(33) 3/87 70 73 12
Direct fax: +(33) 3/87 70 73 56
ASCOMETAL CREAS
e-mail: p.daguier@ascometal.lucchini.com
(P)
IVECO
Responsible: Mr Roberto BIGNUCOLO
Organisation: IVECO
Direct line: +(39) 011/007 24 90
Direct fax: +(39) 011/007 21 45
IVECO - E.B.U. PROCESS ENGINEERING
e-mail: bignucolo@iveco.com
Department: E.B.U. Process Engineering/Innovazione Processo
Address: Lungo Stura Lazio n° 49
IT-10156 TORINO
Contract N°
RFSR-CT-2006-00026
Reference N°
TGS7.01/06
1.420.395
852.331
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: High velocity forming of steel sheets and tubes for applications in the automotive industry
Acronym HI-VEL
:
Automotive industry is demanding more efficient materials and manufacturing processes to design lightweight and safer cars with less vehicle emissions, so
that the use of HSS (high strength steel) has significantly increased.
Regarding innovative manufacturing processes, the high velocity forming techniques (electromagnetic, electrohydraulic) appear to be alternatives to
overcome limitations from a weaker formability of HSS.
The project objective is to establish the feasibility of high velocity forming methods and to quantify the enhancement achievable with these techniques in
the formability of HSS and stainless steel sheets and tubes for automotive applications such as reinforcements, exhaust system components or forming of
small radii at any component.
State of progress:
Partners
(CO)
FUNDACION LABEIN
Responsible: Ing. Leire VADILLO
Direct line: +(34) 94/607 36 21
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: lvadillo@labein.es
ES-48160 DERIO
(P)
ACERINOX
Responsible: Mr Rafael SANCHEZ RODRIGUEZ
Direct line: +(34) 956/62 94 75
Direct fax: +(34) 956/62 93 11
ACERINOX SA
e-mail: rsanchez@acxgroup.com
Department: Physical Metallurgy
186
appliances"
(P)
SSAB
Responsible: Dr. Björn CARLSSON
Direct line: +(49) 211/91 25 126
Organisation: SSAB
Direct fax: +(49) 211/91 25 129
SSAB SWEDISH STEEL GmbH
e-mail: b.carlsson@ssab.com
Address: Grafenberger Allee 87
(P)
ILVA
Responsible: Ing. Massimiliano PAGLIARO
Organisation: ILVA
Direct line: +(39) 0143//413 323
Direct fax: +(39) 0143/745 597
e-mail: massimiliano.pagliaro@rivagroup.com
Department: Automotive Product
(P)
VOEST-ALPINE
Responsible: Dr. Ludovic SAMEK
Direct line: +(43) 732/6585 52 46
Fax: +(43) 50304/55--0
e-mail: ludovic.samek@voestalpine.com
AT-4020 LINZ
(P)
UNIV OULU
Direct line: +(358) 8/55 32 140
Direct fax: +(358) 8/55 32 165
FI-90401 OULU
(P)
KIMAB
Responsible: Prof Arne MELANDER
Direct line: +(46) 8/440 48 70
Organisation: KIMAB
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: arne.melander@swerea.se
Department: Technological Properties
SE-11428 STOCKHOLM
Contract N°
RFSR-CT-2006-00027
Reference N°
TGS7.02/06
1.532.597
919.558
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Ultra high strength and ductile Fe Mn Al C light-weight steels
Acronym MnAl-steel
:
New design concepts for the construction of advanced transportation systems, specifically automotive vehicles of high safety standards, with reduced fuel
consumption and emission of exhaust gases and of low weight require the use of high-strength and ductile steels combined with enhanced energy absorption
and reduced specific weight. Another important aspect is the improvement in deep drawing and stretch forming of sheet steels for the manufacturing of
tailored blanks and stiffened components. Highmanganese light-weight steels of about 18 to 26 wt.-% Mn with larger amounts of aluminium (8 to 11 wt.%) fulfil these requirements.
State of progress:
Partners
187
appliances"
(CO)
MPIE
Responsible: Prof.Dr.-Ing. Georg FROMMEYER
Organisation: MPIE
Direct line: +(49) 211/6792 214
Direct fax: +(49) 211/6792 299
EISENFORSCHUNG GmbH
e-mail: frommeyer@mpie.de
(P)
ARCELOR RESEARCH
Responsible: Dr. Astrid PERLADE
Direct line: +(33) 3/87 70 41 93
Direct fax: +(33) 3/87 70 47 12
e-mail: astrid.perlade@arcelormittal.com
(P)
TKS
Responsible: Dr. Harald HOFMANN
Direct line: +(49) 231/844 45 38
Organisation: TKS
Direct fax: +(49) 231/844 59 05
THYSSEN KRUPP STAHL
e-mail: hofmann@thyssenkrupp.com
Department: 558 FQP-WV-KS
Address:
DE-44120 DORTMUND
(P)
VOEST-ALPINE
Responsible: Dr. Enno ARENHOLZ
Direct line: +(43) 50304/15-6147
Direct fax: +(43) 50304/55-6147
e-mail: enno.arenholz@voestalpine.com
AT-4020 LINZ
Contract N°
RFS2-CT-2007-00025
Reference N°
TGS7.01/07
498.784
299.270
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2008 31/12/2008
Title: Innovative stainless steel applications in transport vehicles
Acronym INSAPTRANS
:
The objective is to disseminate the technical knowledge and application experience from two recently finished ECSC/RFCS research projects. The primary
tool is a handbook to be compiled on the application of advanced safe and lightweight stainless steel structures in ground transport vehicles, demonstrating
the potential of such structures, and giving design guidelines for applications. Special emphasis is on the effect of stainless material, production methods
and design on product LCC and environmental impact. Regional seminars are arranged covering the whole Europe, followed by a workshop for reviewing
the seminar feedback and establishing future actions among European players on the field.
State of progress:
Partners
(CO)
VTT
Responsible: Mr Mika SIREN
Organisation: VTT
Direct line: +(358) 20/722 45 52
Direct fax: +(358) 20/722 70 77
VTT INDUSTRIAL SYSTEMS
e-mail: mika.siren@vtt.fi
Address: PO Box 1000
FI-02044 ESPOO
188
appliances"
(P)
OCAS
Responsible: Ir Nico DE WISPELAERE
Organisation: OCAS
Direct line: +(32) 9/345 12 39
Direct fax: +(32) 9/345 12 04
Department: Stainless Steel
e-mail: nico.dewispelaere@arcelormittal.com
BE-9060 ZELZATE
(P)
CSM
Responsible: Dr Leopoldo RIZZO
Organisation: CSM
Direct line: +(39) 06/505 52 92
Direct fax: +(39) 06/505 54 52
e-mail: l.rizzo@c-s-m.it
IT-00128
(P)
EURO INOX
Responsible: Mr Thomas PAULY
Organisation: EURO INOX
Direct line: +(352) 2/261 03 050
Direct fax: +(352) 2/261 02 051
EURO INOX
e-mail: thomas.pauly@euro-inox.org
Address: route d'Arlon 241
LU-1150 LUXEMBOURG
(P)
OUTOKUMPU
Responsible: MSc Tero TAULAVUORI
Direct line: +(358) 016/45 26 09
Direct fax: +(358) 016/45 32 95
OUTOKUMPU STAINLESS OY
e-mail: tero.taulavuori@outokumpu.com
Address: Tornion tehtaat
FI-95400 TORNIO
(P)
ACERINOX
Responsible: Mr Rafael SANCHEZ RODRIGUEZ
Direct line: +(34) 956/62 94 75
Direct fax: +(34) 956/62 93 11
ACERINOX SA
e-mail: rsanchez@acxgroup.com
Department: Physical Metallurgy
(P)
UGINE-ALZ
Responsible: Ir Didier PAUL
Organisation: UGINE-ALZ
Direct line: +(32) 089/30 19 50
Direct fax: +(32) 089/30 19 07
UGINE & ALZ BELGIUM NV
e-mail: didier.paul@ugine-alz.arcelor.com
Department: Customer Support and Development
Address: Swinnenwijerweg, 5
BE-3600 GENK
189
appliances"
Contract N°
RFSR-CT-2007-00026
Reference N°
TGS7.02/07
1.465.020
879.012
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/10/2007 30/09/2010 30/09/2010
Title: Improvement of automotive tools and components through the applications of deep cryogenic treatments
Acronym CRYO
:
The main aim is to develop and apply deep cryogenic treatments (DCT) in order to improve wear resistance and fatigue life of:
• automotive components, that may lead to weigth reduction;
• metalforming tooling and machining tools, that may lead to increase the tools life.
We will pay special attention to the microstructural changes and the fatigue behaviour improvement that takes place as a function of the cryogenic
treatment route.
The project will provide a better understanding of the parameters influencing the DCT and will analyse how to integrate it within the industrial production
line.
State of progress:
Partners
(CO)
FUNDACION LABEIN
Responsible: Mr José Ignacio BARBERO
Direct line: +(34) 94/60 73 300
Direct fax: +(34) 94/60 73 349
FUNDACION LABEIN
e-mail: jose@labein.es
ES-48160 DERIO
(P)
AIMEN
Responsible: Dr Alberto FERNÁNDEZ VICENTE
Organisation: AIMEN
Direct line: +(34) 986/34 40 00
Direct fax: +(34) 986/33 73 02
ASOCIACION DE INVESTIGACION
METALURGICA DEL NOROESTE - AIMEN
Address: Calle Relva 27A
e-mail: afernandez@aimen.es
Torneiros
ES-36410 PORRIÑO
(P)
VDEH-BFI
Organisation: VDEH
Direct line: +(49) 211/6707 226
Direct fax: +(49) 211/6707 923 226
STAHLINSTITUT VDEh
(P)
BEG
Responsible: Dipl Ing Dr Ziya Devrim CALISKANOGLU
Organisation: BEG
Direct line: +(43) 3820/37 194
Direct fax: +(43) 3820/37 585
BÖHLER EDELSTAHL GmbH
e-mail: devrim.caliskanoglu@bohler-edelstahl.at
AT-8605 KAPFENBERG
190
appliances"
(P)
SIDENOR I+D
Direct line: +(34) 94/487 17 98
Direct fax: +(34) 94/487 18 44
S.A.
(P)
UNIV TRENTO
Responsible: Prof. Massimo PELLIZZARI
Organisation: UNITN
Direct line: +(39) 0461/882 449
Direct fax: +(39) 0461/881 977
e-mail: massimo.pellizzari@ing.unitn.it
IT-38050 TRENTO
Contract N°
RFSR-CT-2007-00027
Reference N°
TGS7.03/07
1.790.888 1.074.532
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Innovative approach for steel design procedures tailored to component machining
Acronym PROMACH
:
Technical breakthroughs in automotive components demand sustainable production and wider use of high-performance steels. Stringent requirements of
machining operations demand re-evaluation of strategies for steel development.
Steel Design Procedure to minimize running costs will be defined for components of above 900 MPa, proposing steel solutions tailored to the machining
process, considering cost analysis and global process productivity. For pearlitic, bainitic and martensitic steels of same strength, screening of available
technologies for machinability improvement (S, Ca, Pb / Bi…), even clean-steels is considered for basic and advanced machining investigations.
Strategies for steel development and process optimization relevant to both European steelmakers and end-users are the expected outcome.
State of progress:
Partners
(CO)
SIDENOR I+D
Responsible: Ms Maria Carmen MONTERO
Direct line: +(34) 94/487 1879
Direct fax: +(34) 94/487 1844
S.A.
e-mail: m_carmen_montero@sidenor.com
(P)
ASCOMETAL
Responsible: Mr Enrico D'ERAMO
Direct line: +(33) 3/87 70 73 15
Direct fax: +(33) 3/87 70 73 56
ASCOMETAL CREAS
e-mail: e.deramo@ascometal.lucchini.com
Department: CREAS Machinability Research Group
191
appliances"
(P)
OVAKO
Responsible: DSc Pekko JUVONEN
Direct line: +(358) 5/680 2506
Organisation: OVAKO
Direct fax: +(358) 5/680 2511
OVAKO BAR OY AB
e-mail: pekko.juvonen@ovako.com
Address: Terästehtaantie, 1
FI-55100 IMATRA
(P)
RWTH
Responsible: Prof. Dr Fritz KLOCKE
Direct line: +(49) 241/80-27401
Organisation: RWTH
Direct fax: +(49) 241/80-22193
HOCHSCHULE AACHEN (RWTH)
Address: Templergraben 55
e-mail: f.klocke@wzl.rwth-aachen.de
DE-52056 AACHEN
(P)
KIMAB
Responsible: Prof. Hariharan CHANDRASEKARAN
Organisation: KIMAB
Direct line: +(46) 8/440 48 28
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: chandra@swerea.se
SE-11428 STOCKHOLM
(P)
MGEP
Responsible: Prof. Pedro José ARRAZOLA
Organisation: MGEP
Direct line: +(34) 943/73 96 64
Direct fax: +(34) 943/79 15 36
MONDRAGON GOI ESKOLA POLITEKNIKOA
J.M.A., S.COOP
Department: High Performance Cutting Laboratory
Address: Loramendi 4
e-mail: pjarrazola@eps.mondragon.edu
ES-20500 ARRASATE/GIPUZKOA
(P)
CRF
Responsible: Dr Andrea GALLINO
Direct line: +(39) 011/908 36 04
Organisation: CRF
Direct fax: +(39) 011/908 36 66
CENTRO RICERCHE FIAT SCPA
e-mail: andrea.gallino@crf.it
Address: Strada Torino 50
IT-10043 ORBASSANO (TO)
Contract N°
RFSR-CT-2008-00028
Reference N°
TGS7.01/08
1.723.197 1.033.919
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Prediction of the kinetics of self-repair of forming-induced defects on thin functional primers for advanced automotive
applications
Acronym KINSREP
:
The proposal deals with self-repair of defects resulting from forming processes in advanced composite organic coatings for the automotive industry. The
approach focusses on the correlation between corrosion tests and practical performance of very thin weldable primers and on the addition of inhibiting
pigments, optionally encapsulated in sub-micron containers, for selfrepair at cracks. The working programme includes (1) the development of a
combination of advanced analytical, spectroscopic and electrochemical techniques, for kinetics study and
monitoring of self-repair of forming-induced defects in coatings applied on zinc-coated steel, and (2) the fundamental understanding of the physicochemical processes involved in self-repair.
State of progress:
Partners
192
appliances"
(CO)
IST
Responsible: Dr Alda Maria PEREIRA SIMOES
Organisation: IST
Direct line: +(351) 21/841 7963
Direct fax: +(351) 21/841 9771
e-mail: alda.simoes@ist.utl.pt
PT-1049 001 LISBOA
(P)
UNIV PADERBORN
Responsible: Mr Guido GRUNDMEIER
Organisation: UNIV PADERBORN
Direct line: +(49) 5251/60 36 46
Direct fax: +(49) 5251/60 32 44
UNIVERSITÄT PADERBORN
e-mail: g.grundmeier@tc.uni-paderborn.de
Address: Warburger Strasse 100
DE-33098 PADERBORN
(P)
DOC
Responsible: Mr Ingo KLÜPPEL
Organisation: DOC
Direct line: +(49) 231/844 5647
Direct fax: +(49) 231/844 3470
DOC DORTMUNDER
OBERFLÄCHENCENTRUM GmbH
Address: Eberhardstraße 12
e-mail: ingo.klueppel@thyssenkrupp.com
DE-44145 DORTMUND
(P)
VOEST-ALPINE
Responsible: Dr. Anna-Elisabeth RAAB
Direct line: +(43) 50304 15
Direct fax: +(43) 50304 15
e-mail: anna-elisabeth.raab@voestalpine.com
AT-4020 LINZ
(P)
CSM
Responsible: Dr.ssa Maria Grazia SERRA
Organisation: CSM
Direct line: +(39) 06/505 53 03
Direct fax: +(39) 06/505 54 61
e-mail: m.serra@c-s-m.it
IT-00128
(P)
UNIV AVEIRO
Responsible: Dr. Mikhail ZHELUDKEVICH
Organisation: UNIV AVEIRO
Direct line: +(351) 234/370 255
Direct fax: +(351) 234/378 146
UNIVERSIDADE DE AVEIRO
e-mail: mzheludkevich@cv.ua.pt
Address: Campus Universitario de Santiago
PT-3810 193 AVEIRO
(P)
SZMF
Responsible: Dr. Ibrahim KUTLU
Organisation: SZMF
Direct line: +(49) 5341/214 786
Direct fax: +(49) 5341/212 963
GmbH
e-mail: i.kutlu@sz.szmf.de
DE-38239 SALZGITTER
193
appliances"
Contract N°
RFSR-CT-2008-00029
Reference N°
TGS7.02/08
1.780.549 1.068.329
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: An efficient and effective methodology and simulation tools for die design and springback compensation for HSS and
UHSS
Acronym SPRINCOM
:
HSS and UHSS offer high light-weighting potential for car body structural components. The large amount of springback after forming operations is
currently limiting the penetration of such steel grades, because of the large effort to be spent for tool design and tolerance satisfaction, requiring longer try
out phases and increased development costs.
The current research proposal aims at enlarging the use of UHSS in the automotive sector by developing and making available to material suppliers and
automotive designers:
- Deep knowledge about springback of UHSS;
- Reliable and robust methods and tools for springback prediction and springback compensation
by die shape modification, taking into account the effect of the steel property variability.
State of progress:
Partners
(CO)
CSM
Organisation: CSM
Direct line: +(39) 06/505 53 38
Direct fax: +(39) 06/505 54 52
IT-00128
(P)
SSAB
Responsible: Dr Lars TROIVE
Organisation: SSAB
Direct line: +(46) 243/717 97
Direct fax: +(46) 243/715 73
SSAB TUNNPLÅT AB
e-mail: lars.troive@ssab.com
Address:
SE-78184 BORLÄNGE
(P)
KIMAB
Responsible: Prof Arne MELANDER
Organisation: KIMAB
Direct line: +(46) 8/440 48 70
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: arne.melander@swerea.se
Department: Technological Properties
SE-11428 STOCKHOLM
(P)
CRF
Responsible: Mrs Rosanna BRUN
Organisation: CRF
Direct line: +(39) 011/90 83 272
Direct fax: +(39) 011/90 83 666
CENTRO RICERCHE FIAT SCPA
e-mail: rosanna.brun@crf.it
Department: Forming Technologies Unit
Address: Strada Torino 50
IT-10043 ORBASSANO (TO)
194
appliances"
(P)
SZMF
Responsible: Dipl.-Ing. Ulrich EGGERS
Organisation: SZMF
Direct line: +(49) 5341/21 6426
Direct fax: +(49) 5341/21 2963
GmbH
Department: Materials Center / Applications Technologies
e-mail: u.eggers@sz.szmf.de
DE-38239 SALZGITTER
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/80 95 783
Direct fax: +(49) 241/80 92 224
DE-52072 AACHEN
(P)
AMET
Responsible: Dr -Ing Paolo CAVALLO
Organisation: AMET
Direct line: +(39) 011/900 7813
Direct fax: +(39) 011/900 7749
AMET ITALY S.R.L.
e-mail: paolo.cavallo@amet.it
Address: Via Livorno, 60
IT-10144 TORINO
195
Technical Group TGS8 :"Steel products and applications for building, construction and industry"
Contract N°
RFS2-CT-2005-00035
Reference N°
TGS8.1/05
333.462
200.078
Duration
Dates:
12 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2006 30/06/2006
Title: Promotion of steel in sustainable and adaptable buildings
Acronym PROSSUS
:
The use of steel in residential buildings is strongly dependent on the concepts of sustainability and adaptable construction systems. This Type 2 project
will disseminate the steel technologies developed and demonstrated in RFCS project 7215-PP-058, with the objective of creating a greater understanding
of new ways of residential building using steel.
It is proposed to prepare dissemination material giving details of the 5 demonstration buildings, and to prepare information on sustainability benefits of
steel construction. Many of the projects in participating countries led to new construction technologies, and this Type 2 project will provide an opportunity
to
disseminate both the new technologies and the information gained during testing and monitoring.
National seminars will help to spread the knowledge to e.g. architects, clients and politicians.
State of progress:
Research completed; publication EUR N° 23201 EN
Partners
(CO)
SCI
Responsible: Mr Graham K. RAVEN
Organisation: SCI
Direct line: +(44) 1344/623 345
Direct fax: +(44) 1344/622 944
THE STEEL CONSTRUCTION INSTITUTE
e-mail: g.raven@steel-sci.com
Address: Buckhurst Road, Silwood Park
GB- ASCOT (BERKSHIRE) SL5 7QN
(P)
SBI
Responsible: Dr. Anders OLSSON
Organisation: SBI
Direct line: +(46) 8/661 02 36
Direct fax: +(46) 8/661 03 05
STIFTELSEN SVENSK
STALBYGGNADSFORSKNING STALBYGGNADSINSTITUTET
Address: (Banérgatan, 54)
e-mail: anders.olsson@sbi.se
SE-11592 STOCKHOLM
(P)
RUUKKI
Responsible: Dr. Jyrki KESTI
Organisation: RUUKKI CONSTRUCTION
Direct line: +(358) 20/592 8107
Direct fax: +(358) 20/592 8100
RAUTARUUKKI OYJ
e-mail: jyrki.kesti@ruukki.com
Address: Laajamäentie 1
(P)
CTICM
Responsible: Mr Philippe BEGUIN
Organisation: CTICM
Direct line: +(33) 1/30 85 20 67
Direct fax: +(33) 1/30 85 21 34
CENTRE TECHNIQUE INDUSTRIEL DE LA
CONSTRUCTION METALLIQUE
Address: Espace technologique l'Orme des Merisiers
e-mail: pbeguin@cticm.com
Immeuble Apollo
FR-91193 SAINT-AUBIN
(P)
CSM
Responsible: Dr. Giuliana ZILLI
Organisation: CSM
Direct line: +(39) 06/5055 422
Direct fax: +(39) 06/5055 452
e-mail: g.zilli@c-s-m.it
IT-00128
196
(P)
FOSTA
Responsible: Dipl. -Ing. Gregor NUESSE
Organisation: FOSTA
Direct line: +(49) 211/6707 839
Direct fax: +(49) 211/6707 840
FORSCHUNGSVEREINIGUNG
STAHLANWENDUNG e.V.
e-mail: gregor.nuesse@stahlforschung.de
DE-40237 DUESSELDORF
Contract N°
RFS2-CT-2005-00036
Reference N°
TGS8.2/05
271.843
163.107
Duration
Dates:
12 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2006 30/06/2006
Title: Valorisation project - structural design of cold worked austenitic stainless steel
Acronym VALCOSS
:
This valorisation project will disseminate guidance on the design of cold worked stainless steel structural members resulting from the recently completed
ECSC project Structural Design of Cold Worked Austenitic Stainless Steel (7210-PR-318). The deliverables include:
• 3rd Edition of the Design Manual for Structural Stainless Steel, extended to cover cold worked material and updated to refer to relevant parts of EN
1993. Three new design / cost comparison examples will be included. The Design Manual will be available in seven European languages.
• Online design facility for cold worked stainless steel members.
• Seven seminars throughout Europe.
State of progress:
Partners
(CO)
SCI
Responsible: Mrs Nancy BADDOO
Organisation: SCI
Direct line: +(44) 1344/636 547
Direct fax: +(44) 1344/636 570
e-mail: n.baddoo@steel-sci.com
Department: Materials
(P)
CUST
Responsible: Prof. Jean-Pierre MUZEAU
Organisation: CUST
Direct line: +(33) 4/73 40 53 12
Direct fax: +(33) 4/73 40 75 10
CUST- DEPARTEMENT GENIE CIVIL,
LABORATOIRE DE GENIE CIVIL (LGC)
Department: Département Génie Civil
Address: BP 206
e-mail: muzeau@cust.univ-bpclermont.fr
FR - 63174 AUBIERE
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/5055 422
Direct fax: +(39) 06/5055 452
IT-00128
(P)
RWTH
Responsible: Prof. Dr.-Ing. Gerhard SEDLACEK
Organisation: RWTH
Direct line: +(49) 241/8025 177
Direct fax: +(49) 241/8022 140
RWTH - INSTITUTE OF STEEL CONSTRUCTION
e-mail: sed@stb.rwth-aachen.de
Address: Mies-van-der-Rohe Strasse 1
DE-52074 AACHEN
197
(P)
VTT
Responsible: M.Sc. Asko TALJA
Direct line: +(358) 9/456 68 31
Organisation: VTT
Direct fax: +(358) 9/456 70 07
VTT BUILDING TECHNOLOGY
e-mail: asko.talja@vtt.fi
Address: P.O.Box 1807
FI-02044 ESPOO
(P)
UPC
Responsible: Dr. Esther REAL
Direct line: +(34) 93/401 73 58
Organisation: UPC
Direct fax: +(34) 93/401 10 36
UNIVERSITAT POLITECNICA DE CATALUNYA
(UPC)
Address: Calle Jordi Girona 31
e-mail: esther.real@upc.es
ES-08034 BARCELONA
(P)
SBI
Responsible: MSc Hans OLSON
Direct line: +(46) 8/661 02 80
Organisation: SBI
Direct fax: +(46) 8/661 03 05
STIFTELSEN SVENSK
e-mail: hans.olson@sbi.se
SE-11592 STOCKHOLM
(P)
EURO INOX
Responsible: Mr Thomas PAULY
Direct line: +(352) 2/261 03 050
Organisation: EURO INOX
Direct fax: +(352) 2/261 02 051
EURO INOX
e-mail: thomas.pauly@euro-inox.org
Address: route d'Arlon 241
LU-1150 LUXEMBOURG
Contract N°
RFS2-CT-2005-00037
Reference N°
TGS8.3/05
290.279
174.167
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2006 31/12/2006
Title: Large web openings for service integration in composite floors
Acronym LWO+
:
This application is related to the ECSC project P4383 – LARGE WEB OPENINGS FOR SERVICE INTEGRATION IN COMPOSITE FLOORS (LWO).
The project started in July 2001 and has been successfully finalised end of 2003.
The objective is to:
– review of the knowledge gained in the frame of the ECSC project LWO
– prepare state of the art reports
– to translate the documents into French, Swedish and German
– to promote the knowledge gained to practitioners via
* Internet
* contacts to CEN
* conferences (e.g. EUROSTEEL 2005 to be held in Maastricht (NL), Swedish Steel
Construction Day, etc.)
* workshops
State of progress:
Partners
(CO)
RWTH
Responsible: Dr.-Ing. Christian MÜLLER
Organisation: RWTH
Direct line: +(49) 241/802 5182
Direct fax: +(49) 241/802 2140
e-mail: mul@stb.rwth-aachen.de
DE-52074 AACHEN
198
(P)
CTICM
Responsible: Mr Alain BUREAU
Direct line: +(33) 1/30 85 20 65
Organisation: CTICM
Direct fax: +(33) 1/30 85 21 34
e-mail: abureau@cticm.com
Immeuble Apollo
(P)
PROFILARBED
Responsible: Mr Olivier VASSART
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
e-mail: olivier.vassart@arcelormittal.com
(P)
SCI
Responsible: Dr. Stephen HICKS
Direct line: +(44) 1344/623 345
Organisation: SCI
Direct fax: +(44) 1344/622 944
e-mail: s.hicks@steel-sci.com
Department: Building Engineering
(P)
LTU
Responsible: Prof. Dr Bernt JOHANSSON
Organisation: LTU
Direct line: +(46) 920/491 344
Direct fax: +(46) 920/491 091
e-mail: bhj@comhem.se
Department: Structural Engineering - Steel Structures
SE-97187 LULEÅ
Contract N°
RFS3-CT-2005-00038
Reference N°
TGS8.4/05
10.500
10.500
Duration
Dates:
8 (Mths)
Starting
Ending
Actual
1/03/2005 31/10/2005 31/10/2005
Title: Stage for the enrichment and calibration of a vibroacoustic model
Acronym ENCAVI
:
The tasks developed by the applicant will be the participation in the testing campaign and the study of non-deterministic methods for the prediction of
vibroacoustic phenomena.
Consequently, the calibration (and enrichment with probabilistic techniques) of the numerical model, the participation in a testing campaign and the
collaboration with more experienced people in vibroacoustics will be the benefits for the applicant.
Moreover, benefits for host and applicant organisations will be a better development of the testing campaign, a more solid and theoretical based knowledge
of vibroacoustic phenomena and a correct interpretation of results which will lead to useful rules of acoustic design for lightweight steel structural
elements.
State of progress:
Partners
(CO)
CSTB
Responsible: Dipl. Ing. Michel VILLOT
Organisation: CSTB
Direct line: +(33) 4/76 76 25 25
Direct fax: +(33) 4/76 44 20 46
CENTRE SCIENTIFIQUE ET TECHNIQUE DU
BATIMENT- NOISE AND VIBRATION DPT
Address: 24 rue Joseph Fourier
e-mail: villot@cstb.fr
FR-38400 SAINT MARTIN D'HERES
199
(P)
UPC
Responsible: M.Sc. Jordi POBLET PUIG
Organisation: UPC
Direct line: +(34) 93/401 71 31
Direct fax: +(34) 93/401 71 30
(UPC)
Department: Edifici C2, Campus Nord UPC
Address: Calle Jordi Girona 31
e-mail: m.forn@ctt.upc.es
ES-08034 BARCELONA
Contract N°
RFSR-CT-2005-00039
Reference N°
TGS8.5/05
710.769
426.461
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Modern plastic design for steel structures
Acronym PLASTOTOUGH
:
The overall objective of this project is to supply analytical methods, which will provide the quantification of an upper shelf toughness criterion to allow for
safe plastic design of steel structures using modern construction steels.
Since this criterion is still missing, the plastic design of structural elements is only permitted when the steels used meet extremely severe test requirements,
which penalise the use of steel by uneconomical design methods.
Therefore the application of this criterion will inevitably lead to increased exploitation and employment of steel in buildings, bridges, pressure vessels,
offshore and pipeline structures and thus to the enhancement of the
competitiveness of the European industry.
State of progress:
Partners
(CO)
RWTH
Responsible: Dipl -Ing Dirk TSCHICKARDT
Organisation: RWTH
Direct line: +(49) 241/80 25219
Direct fax: +(49) 241/80 22140
e-mail: tschickardt@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
NTUA
Responsible: Prof. Ioannis VAYAS
Direct line: +(30) 210/772 1054
Direct fax: +(30) 210/772 3510
ATHENS
Department: Department of Civil Engineering
e-mail: vastahl@central.ntua.gr
GR-15780 ATHENS
(P)
PEINER TRAGER
Responsible: Dipl. -Ing. Marcus LIPPE
Direct line: +(49) 5171/91 9554
Organisation: SALZGITTER
Fax: +(49) 5171/91-00 00
SALZGITTER AG - WERK PEINE
e-mail: lippe.m@salzgitter-ag.de
Department: Quality
Address: Gerhard-Lucas-Meyer Strasse 10
DE-31226 PEINE
(P)
VITKOVICE
Responsible: Dr. Zdenek KUBON
Organisation: VITKOVICE
Direct line: +(420) 595/95 61 74
Direct fax: +(420) 69/292 89 27
VITKOVICE Výzkum a Vývoj, spol. s.r.o.
e-mail: zdenek.kubon@vitkovice-vyzkum.cz
Address: Pohranicni 693/31
CZ-706 02 OSTRAVA
200
Contract N°
RFSR-CT-2005-00040
Reference N°
TGS8.6/05
1.523.500
914.101
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Induction assisted welding technologies in steel utilisation
Acronym INDUCWELD
:
Coming from automotive applications, the potential for high strength steel grades to be applied in lightweight construction are more and more required in
many industrial sectors as construction, agricultural machinery or shipbuilding industry. However, fundamental metallurgical facts cause these steels to be
relatively difficult to weld. The existing limitations, as insufficient fatigue strength caused e.g. by an extreme martensite formation, can be overcome by the
use of appropriate welding methods combined with induction heating. Thus,
an adaption of weld seam properties to the base materials properties will be enabled. The project results are expected to lead to an increased use of high
strength steels and to gain benefit of both cost saving and raw material saving aspects.
State of progress:
Partners
(CO)
LZH
Responsible: Dipl. -Ing. Oliver MEIER
Organisation: LZH
Direct line: +(49) 511/27 88 371
Direct fax: +(49) 511/27 88 100
LASER ZENTRUM HANNOVER e.V.
e-mail: om@lzh.de
Department: Materials and Processes
Address: Hollerithallee 8
DE-30419 HANNOVER
(P)
FHG
Responsible: Prof. Dr. Berndt BRENNER
Organisation: IWS
Direct line: +(49) 351/258 32 07
Direct fax: +(49) 351/258 32 10
FRAUNHOFER INSTITUTE FOR MATERIAL
AND BEAM TECHNOLOGY
Department: Joining and Surface Technology
Address: Winterbergstrasse 28
e-mail: brenner@iws.fraunhofer.de
DE-01277 DRESDEN
(P)
SLV
Responsible: Dr. -Ing. Claas BRUNS
Organisation: SLV
Direct line: +(49) 345/5246 407
Direct fax: +(49) 345/5246 403
SCHWEISSTECHNISCHE LEHR-UND
VERSUCHSANSTALT HALLE GmbH
Address: Köthener Strasse 33a
e-mail: bruns@slv-halle.de
DE-06118 HALLE (SAALE)
(P)
DTU
Responsible: Dr. Flemming OLSEN
Organisation: TU DANMARK
Direct line: +(45) 4525/ 47 51
Direct fax: +(45) 4525 /45 70
TECHNICAL UNIVERSITY OF DENMARK PROCESTEKNISK INSTITUT
Address: Building 425
e-mail: foo@ipl.dtu.dk
DK-2800 LYNGBY
(P)
UNIV HANNOVER
Responsible: Dr. -Ing. Alexander NIKANOROV
Organisation: UNIV HANNOVER
Direct line: +(49) 511/762 3928
Direct fax: +(49) 511/762 3275
GOTTFRIED WILHELM LEIBNIZ UNIVERSITÄT
HANNOVER
Address: Welfengarten 1
e-mail: nikanoro@ewh.uni-hannover.de
DE-30167 HANNOVER
201
(P)
MPIE
Responsible: Prof. Dr. Anke Rita PYZALLA
Telephone: +(49) 211/6792-258
Organisation: MPIE
Fax: +(49) 211/6792-268
EISENFORSCHUNG GmbH
e-mail: anke.pyzalla@mpie.de
(P)
OCAS
Responsible: Dr. Ali Ihsan KORUK
Direct line: +(32) 9/345 13 55
Organisation: OCAS
Direct fax: +(32) 9/345 12 04
Department: Steel Solution & Design
e-mail: ali.ihsan.koruk@arcelormittal.com
BE-9060 ZELZATE
(P)
SZMF
Responsible: Dr.-Ing. Matthias HÖFEMANN
Organisation: SZMF
Direct line: +(49) 5341/21 5732
Direct fax: +(49) 5341/21 2963
GmbH
e-mail: m.hoefemann@sz.szmf.de
DE-38239 SALZGITTER
(P)
CSM
Responsible: Dr.. Maurizio FERSINI
Direct line: +(39) 06/505 54 14
Organisation: CSM
Direct fax: +(39) 06/505 54 52
e-mail: m.fersini@c-s-m.it
IT-00128
(P)
CNH
Responsible: Ing. Luc LEFEBVRE
Direct line: +(32) 50/253 302
Organisation: CNH
Direct fax: +(32) 50/253 654
CNH BELGIUM NV
e-mail: luc.lefebvre@cnh.com
Department: Manufacturing Engineering Supervisor Welding
Address: Leon Claeysstraat 3A
BE-8210 ZEDELGEM
Contract N°
RFSR-CT-2005-00041
Reference N°
TGS8.7/05
1.477.233
886.340
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Economic and durable design of composite bridges with integral abutments
Acronym INTAB
:
Bridges are of vital importance to the European infrastructure and economy leading to the request for highly advances and economic structures.
Further on the maintenance of bridges is an ever-growing problem for the road administrations.
Experience from already constructed bridges with integrated abutments show that the traditional bridges with joints are outclassed, the former being not
only less
expensive to maintain, but also more affordable to build.
The research proposal INTAB investigates on this innovative bridge type and aims on promoting composite bridges with integral abutments.
The major objectives of the proposal are to elaborate cost effective, environmental friendly and sustainable bridge structures, to prove their durability in
practice
and to provide design guidance for competitive construction.
State of progress:
Partners
202
(CO)
RWTH
Responsible: Dipl. -Ing. Daniel PAK
Direct line: +(49) 241/80 235 95
Organisation: RWTH
Direct fax: +(49) 241/80 221 40
e-mail: daniel.pak@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
LTU
Responsible: Prof. Dr. Lennart ELFGREN
Organisation: LTU
Direct line: +(46) 920/491 923
Direct fax: +(46) 920/491 091
e-mail: lennart.elfgren@ltu.se
Department: Civil Engineering
SE-97187 LULEÅ
(P)
RAMBÖLL
Responsible: M.Sc. Tore LUNDMARK
Direct line: +(46) 920/20 01 55
Organisation: RAMBÖLL
Direct fax: +(46) 920/20 01 81
RAMBÖLL SVERIGE AB
e-mail: tore.lundmark@ramboll.se
Department: Bridge Manager
Address: Tullgatan 9
SE-97126 LULEA
(P)
Ulg
Responsible: Prof. René MAQUOI
Direct line: +(32) 4/366 92 97
Organisation: ULG
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
e-mail: r.maquoi@ulg.ac.be
Department: Département M.S.M. Bâtiment B52
Address: Sart Tilman
Allée des Chevreuils, 1 B52/3
BE-4000 LIEGE 1
(P)
ARCELOR PROFIL
Responsible: Mrs Nicoleta POPA
Direct line: +(352) 5313/21 66
Direct fax: +(352) 5313/21 99
S.A.
e-mail: nicoleta.popa@arcelormittal.com
Contract N°
RFSR-CT-2005-00042
Reference N°
TGS8.8/05
1.334.134
800.480
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Fatigue behaviour of high strength steels welded joints in offshore and marine systems
Acronym FATHOMS
:
Several Standards/Recommendations are available for welded joints fatigue design; such codes can be over conservative, sometimes not accounting for
specific in service conditions (e.g. high R values) and not covering high grade steels.
Recently the technological evolution, in particular for offshore applications, seems to point out a trend towards an increasing use of high strength/ high
quality/high performances welded joints (SMYS 420 MPa) and the need to develop a specific know-how on their fatigue behavior is becoming a crucial
issue.
The general aim of this proposal is to comply with this request and to contribute to enlarge the Standards applicability.
State of progress:
Partners
203
(CO)
CSM
Responsible: Dr. Elisabetta MECOZZI
Direct line: +(39) 06/50 55 369
Organisation: CSM
Direct fax: +(39) 06/50 55 452
e-mail: e.mecozzi@c-s-m.it
IT-00128
(P)
CORUS UK
Responsible: Mr M. LARGE
Direct line: +(44) 1709/825 103
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: mick.large@corusgroup.com
Rotherham
(P)
ISQ
Direct line: +(351) 21/422 81 96
Organisation: ISQ
Direct fax: +(351) 21/422 81 26
Talaide
(P)
SZMF
Responsible: Mrs. Marion ERDELEN-PEPPLER
Organisation: SZMF
Direct line: +(49) 203/999 3182
Direct fax: +(49) 203/999 4352
GmbH
Address: Ehinger Strasse 200
e-mail: m.erdelen-peppler@du.szmf.de
DE-47259 DUISBURG
(P)
UNIV THESSALY
Responsible: Prof. Philip C. PERDIKARIS
Direct line: +(30) 2421/07 41 51
Direct fax: +(30) 2421/07 41 69
PANEPISTIMIO THESSALIAS*UNIVERSITY OF
THESSALY
Address: Argonafton & Filellinon str.
e-mail: filperd@civ.uth.gr
GR-38221 VOLOS
Contract N°
RFSR-CT-2006-00028
Reference N°
TGS8.01/06
1.091.421
654.852
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Connections of steel and composite structures under natural fire conditions
Acronym COSSFIRE
:
Based on the existing technical data on standard fire behaviour of steel and composite structure connections, the current proposed project is aimed to
investigate in detail the behaviour of connections under natural fire condition by means of:
• natural fire heating condition tests on both connection components (bolts and welding) and different types of connections;
• advanced numerical modelling and different parametric numerical analysis;
Above experimental and numerical investigations will lead to the development of:
• simple calculation rules as well as construction details for economic and practical fire design of connections of steel framed buildings
• a design guide of steel connections under natural fire condition and for global structural analysis in fire safety engineering
State of progress:
Partners
204
(CO)
CTICM
Responsible: Dr Bin ZHAO
Organisation: CTICM
Direct line: +(33) 1/30 85 20 73
Direct fax: +(33) 1/30 85 37 29
Department: Fire Research section
Address: Fire Research & Engineering section
e-mail: binzhao@cticm.com
102 Route de Limours
FR-78471 St.-Rémy-Lès-Chevreuse
(P)
TNO
Responsible: MSc. Joris FELLINGER
Organisation: TNO
Direct line: +(31) 15/276 3487
Direct fax: +(31) 15/276 3025
TNO CENTRE FOR FIRE RESEARCH
e-mail: joris.fellinger@tno.nl
Address: Van Mourik Broekmanweg 6
NL-2628 XE DELFT
(P)
CORUS UK
Responsible: Mr Allan R. GRIFFIN
Direct line: +(44) 1709/825 508
Direct fax: +(44) 1709/825 337
CENTRE
Department: c/o Construction Applications Department
e-mail: allan.griffin@corusgroup.com
Rotherham
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/5055 422
Direct fax: +(39) 06/5055 452
IT-00128
(P)
Ulg
Responsible: Dr Jean-Marc FRANSSEN
Organisation: ULG
Direct line: +(32) 4/366 92 65
Direct fax: +(32) 4/366 95 34
UNIVERSITE DE LIEGE
e-mail: jm.franssen@ulg.ac.be
Department: Service Ponts et Charpentes-Institut Génie Civil/
Address: Quai Banning 6
BE-4000 LIEGE
(P)
EFECTIS
Responsible: Dr. Kees BOTH
Organisation: EFECTIS
Direct line: +(31) 15/276 34 83
Direct fax: +(31) 15/276 34 83
EFECTIS NEDERLAND B.V.
e-mail: kees.both@efectis.com
Address: Lange Kleiweg 5
NL-2288 GH RIJSWIJK
205
Contract N°
RFSR-CT-2006-00029
Reference N°
TGS8.02/06
1.518.566
911.139
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Improvement in steel utilisation by recent break-through in high-power fibre laser welding
Acronym FIBLAS
:
To join high-strength steels, various laser welding processes are applied. However, these lasers show low flexibility, low efficiency and high costs, which
often prohibits their application. To improve this situation, high-power fibre lasers have been recently developed. However, only few experiences in
welding exist. To prepare their application, welding equipment and processes will be developed and the process-property-performance relationship will be
established for high-strength steels, taking the applications shipbuilding, pipe production and pipelaying. The results are expected to lead to an increased
use of high strength steels and to improve cost saving and environmental protection by energy
savings.
State of progress:
Partners
(CO)
BIAS
Responsible: Dipl. -Ing. Thomas SEEFELD
Organisation: BIAS
Direct line: +(49) 421/218 50 40
Direct fax: +(49) 421/218 50 63
BIAS - BREMER INSTITUT FÜR ANGEWANDTE
STRAHLTECHNIK GMBH
Department: Laser Materials Processing
Address: Klagenfurter Strasse 2
e-mail: seefeld@bias.de
DE-28359 BREMEN
(P)
SLV
Responsible: Dipl. -Ing. Ulf JASNAU
Organisation: SLV
Direct line: +(49) 381/811 5026
Direct fax: +(49) 381/811 5099
SCHWEISSTECH. LEHR- UND
VERSUCHSANSTALT MECKLENBURGVORPOMMERN GmbH
Department: R&D
Address: Alter Hafen Sued 4
e-mail: jasnau@slv-rostock.de
DE-18069 ROSTOCK
(P)
UNIV CRANFIELD
Responsible: Mr David YAPP
Organisation: UNIV CRANFIELD
Direct line: +(44) 1234/75 47 19
Direct fax: +(44) 1234/75 47 17
CRANFIELD UNIVERSITY
e-mail: d.yapp@cranfield.ac.uk
Address: College Road, Cranfield Bedford
GB- BEDFORDSHIRE MK43 0AL
(P)
GKSS
Responsible: Dr. Mustafa KOÇAK
Organisation: GKSS
Direct line: +(49) 4152/87 2536
Direct fax: +(49) 4152/87 2549
GKSS-FORSCHUNGSZENTRUM GEESTHACHT
GmbH
Department: Institut für Werkstofforschung
e-mail: mustafa.kocak@gkss.de
DE-21502 GEESTHACHT
(P)
VUZ
Responsible: Assoc. Prof. Peter BERNASOVSKY
Organisation: VUZ
Direct line: +(421) 2/492 46 871
Direct fax: +(421) 2/492 46 269
VYSKUMNY USTAV ZVARACSKY PRIEMYSELNY INSITUT SR
Department: Material Testing Division
Address: Racianska 71
e-mail: bernasovsky.peter@vuz.sk
SK-832 59 BRATISLAVA
206
(P)
OCAS
Responsible: Dr. Ali Ihsan KORUK
Organisation: OCAS
Direct line: +(32) 9/345 13 55
Direct fax: +(32) 9/345 12 04
Department: Steel Solution & Design
e-mail: ali.ihsan.koruk@arcelormittal.com
BE-9060 ZELZATE
(P)
SZMF
Responsible: Dr. Steffen-Erich BRUENINGS
Organisation: SZMF
Direct line: +(49) 203/999 3175
Direct fax: +(49) 203/999 4415
GmbH
e-mail: s.e.bruenings@du.szmf.de
DE-47259 DUISBURG
(P)
CPW
Responsible: Dr. Athanassios TAZEDAKIS
Organisation: CPW
Direct line: +(30) 2/2640 22777
Direct fax: +(30) 2/2640 22210
CORINTH PIPEWORKS
e-mail: atazedakis@cpw.vionet.gr
Address:
GR-320 10 DOMVRENA (VIOTIAS)
(P)
VIETZ
Responsible: Dipl. -Ing. Markus SCHLOSNECK
Organisation: VIETZ
Direct line: +(49) 511/94 99 70
Direct fax: +(49) 511/49 60 912
VIETZ GMBH
e-mail: schlosneck@vietz-vpn.de
Department: Construction
Address: Fraenkische Strasse 30-32
DE-30455 HANNOVER
(P)
SERIMER
Responsible: Mr Damien ROLLOT
Organisation: SERIMER
Direct line: +(33) 1/60 21 67 27
Direct fax: +(33) 1/60 21 67 01
SERIMAX SAS
e-mail: damien.rollot@serimer.com
Department: Welding R&D
Address: 8 rue Mercier
FR-77290 MITRY MORY
(P)
IMG
Responsible: Prof. Dr. -Ing. Peter SEYFFARTH
Organisation: IMG
Direct line: +(49) 381/793 450
Direct fax: +(49) 381/71 21 89
INGENIEURTECHNIK UND MASCHINENBAU
GMBH
e-mail: p.seyffarth@img-tech.de
DE-18069 ROSTOCK
(P)
AIR LIQUIDE
Responsible: Dr. Francis BRIAND
Direct line: +(33) 1/34 21 30 66
Direct fax: +(33) 1/34 21 30 34
AIR LIQUIDE - CTAS
e-mail: francis.briand@airliquide.com
Address: 13, rue d'Epluches
FR-95310 ST-OUEN-L'AUMONE
207
Contract N°
RFSR-CT-2006-00030
Reference N°
TGS8.03/06
1.396.401
837.841
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Prefabricated enduring composite beams based on innovative shear transmission
Acronym PrECo-Beam
:
Composite structures are gaining in importance in Europe. The combination of materials within its specific properties results in very slender and economic
constructions. Composite girders permit large spans in slender frame bridges without loss of economy. Due to the high grade of prefabrication in building
construction smaller survey heights and shorter construction times are possible.
The enduring bearing capacity of composite girders depends on the performance of material and the design of shear connection. A new form of shear
transmission - the concrete dowel - permits composite girders without an upper steel flange and an enduring shear connection also of high strength steel with
high strength concrete. The PrECo-Beam construction and its application are comparable to existing prefabricated composite systems. With a high surface
durability and less sensitivity for fatigue the system comprehends long-lasting advantages. The modular composition moves principal works for the
structures
and multi-storey building from the site into the workshop, reduces the construction time and improves the quality to reduce maintenance costs.
State of progress:
Partners
(CO)
SSF
Responsible: Mr Günter SEIDL
Organisation: SSF
Direct line: +(49) 89/36040 137
Direct fax: +(49) 89/36040 5137
SSF-INGENIEURE GmbH
e-mail: gseidl@ssf-ing.de
Address: Leopoldstrasse 208
DE-80804 MÜNCHEN
(P)
SETRA
Responsible: Eng. Jacques BERTHELLEMY
Organisation: SETRA
Direct line: +(33) 1/46 11 32 69
Direct fax: +(33) 1/45 36 83 69
SERVICE D'ETUDES TECHNIQUES DES
ROUTES ET AUTOROUTES (SETRA)
Address: 46, avenue Aristide Briand
e-mail: jacques.berthellemy@equipement.gouv.fr
BP100
FR-92 223 BAGNEUX
(P)
UNIV BUND MUNICH
Responsible: Mr Sascha BURGER
Direct line: +(49) 89/6004 40 19
Organisation: UNIV BUND MUNICH
Direct fax: +(49) 89/6004 34 72
UNIVERSITÄT DER BUNDESWEHR MÜNCHEN
e-mail: sascha.burger@univbw-muenchen.de
Address: Werner-Heisenberg-Weg 39
DE-85577 MÜNCHEN
(P)
WROCLAW UT
Responsible: Dr -Ing Wojciech LORENC
Direct line: +(48) 60/80267 84
Direct fax: +(48) 71/32214 65
e-mail: wojciech.lorenc@pwr.wroc.pl
PL-50344 WROCLAW
(P)
Ulg
Organisation: ULG
Direct line: +(32) 4/366 92 65
Direct fax: +(32) 4/366 95 34
UNIVERSITE DE LIEGE
BE-4000 LIEGE
208
(P)
RAMBÖLL
Responsible: Prof Peter COLLIN
Direct line: +(46) 920/200 154
Direct fax: +(46) 920/200 180
RAMBÖLL SVERIGE AB
e-mail: peter.collin@ramboll.se
Department: Bridge
SE-97126 LULEA
(P)
ARCELOR PROFIL
Direct line: +(352) 5313/21 66
Direct fax: +(352) 5313/21 99
S.A.
Contract N°
RFSR-CT-2006-00031
Reference N°
TGS8.04/06
1.393.722
836.234
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: High-strength steel tower for wind turbines
Acronym HISTWIN
:
The over all objective is to improve competitiveness of steel towers used to support multi mega-watt wind turbines. An integrated view on the optimization
of the whole steel tower is based on an analysis of the limiting criteria that govern wind tower design. Fatigue is one restraint for design of a more
economical towers and use of high strength steel. One solution is an improvement of the existing flange detail and another to use of friction type joint to
allow higher strains in the shell. A detailed program is conceived to verify these two innovations. Another limitation is shell buckling where the resistance
is strongly related to imperfections. An optimal balance between fabrication costs and resistance will be sought.
State of progress:
Partners
(CO)
LTU
Responsible: Assoc.Prof.Dr. Milan VELJKOVIC
Organisation: LTU
Direct line: +(46) 920/492 387
Direct fax: +(46) 920/491 913
e-mail: milan.veljkovic@ltu.se
SE-97187 LULEÅ
(P)
RWTH
Responsible: Prof Dr -Ing Markus FELDMANN
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
e-mail: feldmann@stb.rwth-aachen.de
Department: Lehrstuhl für Stahlbau
DE-52074 AACHEN
(P)
GL WIND
Responsible: Dr.-Ing. Torsten FABER
Organisation: GL WIND
Direct line: +(49) 40/31106 6768
Direct fax: +(49) 40/31106 1720
GERMANISCHER LLOYD WINDENERGIE GmbH
e-mail: fab@gl-group.com
Department: Rotor Blades and Civil Engineering Department
Address: Steinhoeft 9
DE-20459 HAMBURG
209
(P)
AUTH
Responsible: Prof. Dr.-Ing. Charalampos BANIOTOPOULOS
Organisation: AUTH
Direct line: +(30) 2310/995 753
Direct fax: +(30) 2310/995 642
e-mail: ccb@civil.auth.gr
Department: Civil Enginneering
(P)
REPOWER
Responsible: Eng. António PONTES
Direct line: +(351) 935/991 203
Organisation: REPOWER
Direct fax: +(351) 232/767 762
REPOWER PORTUGAL - SISTEMAS EÓLICOS SA
e-mail: antonio.pontes@martifer.pt
Address: Zona Industrial de Oliveira de Frades
PT-3684-001 OLIVEIRA DE FRADES
(P)
UNIV COIMBRA
Responsible: Prof Dr Luis SIMOES DA SILVA
Organisation: UNIV COIMBRA
Direct line: +(351) 239/79 72 16
Direct fax: +(351) 239/79 72 17
FACULDADE DE CIENCIAS E TECNOLOGIA DA
UNIVERSIDADE DE COIMBRA
Department: Steel and Composite Section
Address: Rua Silvio Lima
e-mail: luisss@dec.uc.pt
Universidade de Coimbra Polo II
PT-3030-790 COIMBRA
(P)
RUUKKI
Responsible: Mr Juha NUUTINEN
Direct line: +(358) 40/557 8722
Fax: +(358) 3/528 56 60
RUUKKI ENGINEERING
e-mail: juha.nuutinen@ruukki.com
Contract N°
RFSR-CT-2006-00032
Reference N°
TGS8.05/06
2.633.572 1.580.142
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Design for optimal life cycle costs (LCC) of high speed railway bridges by enhanced monitoring systems
Acronym DETAILS
:
Steel-concrete composite bridges are an important alternative to concrete bridges due to considerable advantages regarding the design, construction time,
durability and costs.
They are largely exploited in high-speed lines of the European railway networks even if a lot of still open problems in design and management limit their
exploiting.
The proposal aims to remove actual uncertainties on dynamic effects and interaction phenomena, fatigue loadings, structural modelling, fatigue life and
damage assessment.
What’s more, such results will allow to set up an innovative design approach, able to minimize life-cycle costs guaranteeing adequate safety level and
working conditions.
State of progress:
Partners
(CO)
ILVA
Responsible: Dott Ing Alessandro OSTA
Organisation: ILVA
Direct line: +(39) 010/607 86 26
Direct fax: +(39) 010/607 99 53
ILVA
e-mail: alessandro.osta@rivagroup.com
Department: Politiche Ambientali - Politiche di Ricerca
Address: Via L. A. Muratori, 15
IT-16152 GENOVA CORNIGLIANO
210
(P)
KUL
Responsible: Dr. Guido DE ROECK
Organisation: KUL
Direct line: +(32) 16/321 966
Direct fax: +(32) 16/321 988
KATHOLIEKE UNIVERSITEIT LEUVEN
e-mail: guido.deroeck@bwk.kuleuven.be
Department: Deparment of Civil Engieering
Address: Kasteelpark Arenberg, 40
BE-3001 LEUVEN
(P)
LMS
Responsible: Dr. Ir. Bart PEETERS
Organisation: LMS
Direct line: +(32) 16/384 200
Direct fax: +(32) 16/384 350
LEUVEN MEASUREMENT & SYSTEMS
INTERNATIONAL NV
Department: Testing Systems Bussiness Unit
Address: Interleuvenlaan 68
e-mail: bart.peeters@lms.be
BE-3001 LEUVEN
(P)
RWTH
Responsible: Dr -Ing Benno HOFFMEISTER
Organisation: LEH. STAHLB RWTH
Direct line: +(49) 241/8025 183
Direct fax: +(49) 241/8022 140
LEHRSTUHL FÜR STAHLBAU, RWTH AACHEN
e-mail: hoff@stb.rwth-aachen.de
Address: Mies-van-der-Rohe Strasse, 1
DE-52074 AACHEN
(P)
AGDH
Responsible: Dr.-Ing. Falko SCHRÖTER
Organisation: AGDH
Direct line: +(49) 6831/47 31 94
Direct fax: +(49) 6831/47 30 89
HÜTTENWERKE
Department: Marketing
e-mail: falko.schroeter@dillinger.biz
(P)
BUW
Responsible: Prof. Dr. Christian BUCHER
Organisation: BUW
Direct line: +(49) 3643/584 511
Direct fax: +(49) 3643/584 514
BAUHAUS-UNIVERSITÄT WEIMAR
e-mail: christian.bucher@bauing.uni-weimar.de
Department: Institute of Structural Mechanics
Address: Geschwister-Scholl-Strasse, 8
DE-99423 WEIMAR
(P)
VCE
Responsible: Dipl. -Ing. Dr. Helmut WENZEL
Organisation: VCE
Direct line: +(43) 1/897 5359
Direct fax: +(43) 1/893 8671
VCE HOLDING GmbH
e-mail: wenzel@vce.at
Address: Hadikgasse, 60
AT-1140 VIENNA
(P)
UNIV PISA
Responsible: Dr Walter SALVATORE
Organisation: UNIV PISA
Direct line: +(39) 050/835 725
Direct fax: +(39) 050/554 597
UNIVERSITA DI PISA - DIPARTIMENTO DI
INGEGNERIA STRUTTURALE
Address: Via Diotisalvi 2
e-mail: walter@ing.unipi.it
IT-56126 PISA
211
(P)
MIO (HO)
Responsible: Dr. Wasoodev HOORPAH
Organisation: MIO
Direct line: +(33) 6/63 63 42 57
Direct fax: +(33) 1/34 50 89 55
METHODES INGENIERIE OUVRAGES - MIO
e-mail: w.hoorpah@aliceadsl.fr; mio2@aliceadsl.fr
Address: 8, allée Louis Schreck
FR-95530 LA FRETTE SUR SEINE
Contract N°
RFS2-CT-2007-00028
Reference N°
TGS8.01/07
456.929
274.158
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/06/2007 30/11/2008 30/11/2008
Title: Workpack design for steel house
Acronym WiSH
:
The project objective is to increase light steel frames use in housing by a new fully validated comprehensive, self contained and userfriendly design
package.
Such use exploits favourable criteria such as cost, safety, environmental/energy impacts and design flexibility. The gap of light steel frame use in Europe
compared to America or Japan is partly due to the lack of common tools and building players awareness of benefits of light steel construction.
The objective will be met by promotion and dissemination of the design package starting with Belgium, France and Spain by means of workshops, training
sessions preparation and IT-based communication.
State of progress:
Partners
(CO)
ARCELOR RES LIEGE
Responsible: Ar Chistine ETZENBACH
Organisation: ARCELOR RES LIEGE
Direct line: +(32) 4/236 88 20
Direct fax: +(32) 4/236 88 98
ARCELORMITTAL RESEARCH LIEGE SCRL
e-mail: christine.etzenbach@arcelormittal.com
Address: Boulevard de Colonster, B57
BE-4000 LIEGE
(P)
CTICM
Responsible: Mr Patrick LE CHAFFOTEC
Organisation: CTICM
Direct line: +(33) 1/60 13 83 41
Direct fax: +(33) 1/60 13 70 83
Department: Steel Construction
e-mail: plechaffotec@cticm.com
Immeuble Apollo
(P)
UPC
Responsible: Prof. Antonio HUERTA
Organisation: UNIV CATALUÑA
Direct line: +(34) 93/401 69 16
Direct fax: +(34) 93/401 18 25
e-mail: antonio.huerta@upc.edu
Address: Jordi Girona 31
ES-08034 BARCELONA
(P)
EUR LSC
Responsible: Dr Natividad PASTOR TORRENTE
Organisation: LSK
Direct line: +(34) 93/4340 695
Direct fax: +(34) 93/2119 839
LSK
e-mail: nati.pastor.lsk@gmail.com
Department: Technical Department
Address: Folgaroles, 46
ES-08022 BARCELONA
212
(P)
CSTB
Responsible: Mr Emmanuel DAVID
Direct line: +(33) 1/64 68 88 17
Organisation: CSTB
Direct fax: +(33) 1/64 68 88 34
BATIMENT
Address: Avenue Jean Jaurès 84
e-mail: e.david@cstb.fr
FR-77420 CHAMPS SUR MARNE
Contract N°
RFS2-CT-2007-00029
Reference N°
TGS8.02/07
495.333
297.200
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2008 31/12/2008
Title: Dissemination of EUROBUILD in steel
Acronym EUROBUILD+
:
The objective of this dissemination project is to publicise the findings of the Eurobuild in Steel project on the key factors that influence the next generation
of steel framed buildings and to prepare best practice guidance on the use of steel that reflects these trends and drivers. The project will take the form of
national seminars in 7 countries, publications of best practice guidance on commercial, industrial and residential buildings, and further dissemination
through stakeholders and IPOs at a European level. A data base of important information will be prepared.
State of progress:
Partners
(CO)
ARCELOR PROFIL
Direct line: +(352) 5313/21 66
Direct fax: +(352) 5313/21 99
S.A.
(P)
SCI
Responsible: Dr R. Mark LAWSON
Organisation: SCI
Direct line: +(44) 1344/636 525
Direct fax: +(44) 1344/636 570
e-mail: m.lawson@steel-sci.com
Department: Construction Technology
(P)
UNIV DORTMUND
Responsible: Prof. Dr.-Ing. Dieter UNGERMANN
Organisation: UNIV DORTMUND
Direct line: +(49) 231/755 4770
Direct fax: +(49) 231/755 2486
TECHNISCHE UNIVERSITÄT DORTMUND
e-mail: dieter.ungermann@uni-dortmund.de
Address: August-Schmidt-Strasse 4
DE-44221 DORTMUND
(P)
SBI
Responsible: Mr Joakim WIDMAN
Organisation: SBI
Direct line: +(46) 8/661 02 48
Direct fax: +(46) 8/661 03 05
STÅLBYGGNADSINSTITUTET
e-mail: joakim.widman@sbi.se
Address: Box 27751
SE-115 92 STOCKHOLM
213
(P)
CTICM
Direct line: +(33) 1/30 85 20 67
Organisation: CTICM
Direct fax: +(33) 1/30 85 21 34
Immeuble Apollo
(P)
FUNDACION LABEIN
Responsible: Mr Jose A. CHICA
Direct line: +(34) 94/607 33 88
Organisation: LABEIN
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: jachica@labein.es
Department: Steel Systems for Construction
Address: Parque tecnológico, 101
C/ Geldo, Edificio 700
ES-48170 ZAMUDIO (BIZKAIA)
(P)
BMS
Responsible: Mr Mic BARENDZS
Direct line: +(31) 79/353 12 77
Organisation: BMS
Direct fax: +(31) 79/353 12 78
BOUWEN MET STAAL
e-mail: mic@bouwenmetstaal.nl
Address: Boerhaavelaan 40
NL-2713 HX ZOETERMEER
Contract N°
RFS2-CT-2007-00030
Reference N°
TGS8.03/07
722.149
433.289
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2008 31/12/2008
Title: Dissemination of structural fire safety engineering knowledge throughout Europe
Acronym DIFISEK+
:
The technical objective is to disseminate Structural Fire Safety Engineering Knowledge gained in recent ECSC&RFCS funded projects to practicing
engineers in various countries, in their own languages. This project will extend a previous RFCS project entitled DIFISEK that covered a few European
countries and will now cover nearly all European countries. Another objective is to update the material for fire design prepared in the first project
(according EN version) and to implement Eurocode National Annexes.
All data will be translated and seminars will be organised in the following countries, Austria, Belgium, Czech-Republic, Estonia, France, Germany, Greece,
Hungary, Italy, Lithuania, Poland, Portugal, Romania, Slovenia, Spain, Sweden and United-Kingdom.
State of progress:
Partners
(CO)
ARCELOR PROFIL
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
(P)
UNIV HANNOVER
Responsible: Prof. Dr -Ing Peter SCHAUMANN
Direct line: +(49) 511/762 37 81
Direct fax: +(49) 511/762 29 91
UNIVERSITY OF HANNOVER - INSTITUTE FOR
STEEL CONSTRUCTION
Address: Appelstraße 9a
e-mail: schaumann@stahl.uni-hannover.de
DE-30167 HANNOVER
214
(P)
FUNDACION LABEIN
Direct line: +(34) 94/607 33 88
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
(P)
CTICM
Organisation: CTICM
Direct line: +(33) 1/30 85 20 73
Direct fax: +(33) 1/30 85 37 29
(P)
UNIV LONDON
Responsible: Prof. Kuldeep VIRDI
Organisation: UNIV LONDON
Direct line: +(44) 20/7040 8142
Direct fax: +(44) 20/7040 8570
CITY UNIVERSITY
e-mail: k.s.virdi@city.ac.uk
Department: Structural Engineering
Address: Northampton Square
GB- LONDON EC1V 0HB
(P)
UNIV PRAGUE
Responsible: Prof. -Ing CSc Frantisek WALD
Organisation: UNIV PRAGUE
Direct line: +(420) 2/24 354 757
Direct fax: +(420) 2/33 334 766
CESKE VYSOKE UCENI TECHNICKE V
PRAZE*CZECH TECHNICAL UNIV. IN PRAGUE
Address: Zikova 4
e-mail: wald@fsv.cvut.cz
CZ-166 36 PRAGUE 6
(P)
STRUCTURA ENG.
Responsible: Dr Ing Sandro PUSTORINO
Organisation: STRUCTURA ENG.
Direct line: +(39) 586/834 339
Direct fax: +(39) 586/834 010
STRUCTURA ENGINEERING SRL
e-mail: strueng@tin.it
Address: Via Borra 35
IT-57123 LIVORNO
(P)
UNIV AVEIRO
Responsible: Prof. Paulo VILA REAL
Organisation: UNIV AVEIRO
Direct line: +(351) 351/34 37 00 49
Direct fax: +(351) 351/34 37 00 94
UNIVERSIDADE DE AVEIRO
e-mail: pvreal@civil.ua.pt
Address: Campus Universitario de Santiago
PT-3810 193 AVEIRO
(P)
UNIV VIENNA
Responsible: O.Univ Prof. Dr Ulrich SCHNEIDER
Organisation: UNIV VIENNA
Direct line: +(43) 1/58801 20600
Direct fax: +(43) 1/58801 20699
TECHNISCHE UNIVERSITAET WIEN
e-mail: ulrich.schneider@tuwien.ac.at
Address: Karlsplatz 13
AT-1040 WIEN
215
(P)
UNIV POZNAN
Responsible: Dr Maciej SZUMIGALA
Organisation: PUT
Direct line: +(48) 61/665 2401
Direct fax: +(48) 61/8766 116
POZNAN UNIVERSITY OF TECHNOLOGY
e-mail: maciej.szumigala@put.poznan.pl
Department: Institute of Structural Engineering
Address: Ul. Piotrowo 5
PL-60965 POZNAN
(P)
SBI
Responsible: MSc Björn UPPFELDT
Organisation: SBI
Direct line: +(46) 8/661 02 54
Direct fax: +(46) 8/661 03 05
STIFTELSEN SVENSK
e-mail: bjorn.uppfeldt@sbi.se
SE-11592 STOCKHOLM
(P)
UNIV MISKOLC
Responsible: Prof. Karoly JARMAI
Organisation: UNIV MISKOLC
Direct line: +(36) 46/565 111
Direct fax: +(36) 46/563 399
MISKOLCI EGYETEM*UNIVERSITY OF
MISKOLC
Department: Dept. of Material Handling and Logistics
Address: Egyetemvaros
e-mail: altjar@uni-miskolc.hu
HU-3515 MISKOLC
(P)
UNIV TIMISOARA
Responsible: Dr Raul Dan ZAHARIA
Organisation: UNIV TIMISOARA
Direct line: +(40) 256/40 39 25
Direct fax: +(40) 256/40 39 32
UNIVERSITATEA POLITEHNICA DIN
TIMISOARA
Address: Piata Victorei, 2
e-mail: raul.zaharia@ct.upt.ro
RO-300006 TIMISOARA
(P)
VILNIUS GEDIMINAS
Responsible: Prof. Dr Habil Audronis Kazimieras KVEDARAS
Organisation: VILNIUS GEDIMINAS
Direct line: +(370) 5/274 5227
Direct fax: +(370) 5/237 0569
VILNIUS GEDIMINO TECHNIKOS
UNIVERSITETAS
Address: Sauletekio al. 11
e-mail: akve@st.vtu.lt
LT-10223 VILNIUS 40
(P)
AUTH
Responsible: Prof. Dr.-Ing. Charalampos BANIOTOPOULOS
Organisation: AUTH
Direct line: +(30) 2310/995 753
Direct fax: +(30) 2310/995 642
e-mail: ccb@civil.auth.gr
Department: Civil Enginneering
216
(P)
TALLINN UT
Responsible: Prof. Kalju LOORITS
Direct line: +(372) 2/620 24 01
Organisation: TALLINN UT
Direct fax: +(372) 2/620 24 05
TALLINNA TEHNIKAULIKOOL*TECHNICAL
UNIVERSITY OF TALLINN
Department: Structural Design
Address: Ehitajate tee 5
e-mail: kloorits@edu.ttu.ee
EE-19086 TALLINN
(P)
UNIV LJUBLJANA
Responsible: Prof. Darko BEG
Direct line: +(386) 1/476 86 26
Organisation: UNIV LJUBLJANA
Direct fax: +(386) 1/476 86 29
UNIVERZA V LJUBLJANI
e-mail: dbeg@fgg.uni-lj.si
Department: Chair for Metal Structures
Address: Kongresni Trg 12
SI-1000 LJUBLJANA
Contract N°
RFS2-CT-2007-00031
Reference N°
TGS8.04/07
408.085
244.851
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2008 31/12/2008
Title: Valorisation of knowledge for competitive steel and composite bridges
Acronym COMBRI+
:
Within the RFCS research project COMBRI essential knowledge has been assembled to enhance the competitiveness of steel and composite bridges. This
type 2 proposal aims at the valorisation and promotion of these results not only to reach a wider audience but also to assure the application of the
outcomes. A design manual including worked examples and conceptual design issues will contribute to a better understanding and assessment of the
knowledge gained along with the possibility to highlight the relevant topics. An implementation of the knowledge in a future revision of Eurocode or in
national application documents is prepared to create a common basis providing European designers, manufacturers and bridge owners with all the benefits.
State of progress:
Partners
(CO)
USTUTT
Responsible: Prof. Dr Ulrike KUHLMANN
Direct line: +(49) 711/685 662 45
Direct fax: +(49) 711/685 662 36
e-mail: u.kuhlmann@ke.uni-stuttgart.de
Department: Institute of Structural Design
DE-70569 STUTTGART
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
DE-52074 AACHEN
(P)
CTICM
Responsible: Mr Pierre-Olivier MARTIN
Organisation: CTICM
Direct line: +(33) 1/30 85 20 98
Direct fax: +(33) 1/30 85 21 34
e-mail: pomartin@cticm.com
Immeuble Apollo
217
(P)
LTU
Responsible: Prof. Dr Bernt JOHANSSON
Organisation: LTU
Direct line: +(46) 920/491 344
Direct fax: +(46) 920/491 091
e-mail: bhj@comhem.se
SE-97187 LULEÅ
(P)
Ulg
Responsible: Dr Hervé DEGEE
Direct line: +(32) 4/366 92 85
Organisation: ULG
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
e-mail: h.degee@ulg.ac.be
Department: FNRS
BE-4000 LIEGE 1
(P)
FUNDACION LABEIN
Direct line: +(34) 94/607 33 88
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
(P)
SETRA
Responsible: Mr Joël RAOUL
Direct line: +(33) 1/46 11 32 25
Organisation: SETRA
Direct fax: +(33) 1/46 11 36 81
SERVICE D'ETUDES TECHNIQUES DES
ROUTES ET AUTOROUTES (SETRA)
Department: Service Technique d'Ouvrages d'Art (CTOA)
Address: 46, avenue Aristide Briand
e-mail: joel.raoul@equipement.gouv.fr
BP100
FR-92 223 BAGNEUX
Contract N°
RFS2-CT-2007-00032
Reference N°
TGS8.05/07
352.181
211.308
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2008 31/12/2008
Title: Fire safety of industrial hall - valorisation project
Acronym FS+
:
New fire safety regulation proposals for single storey buildings have appeared in different countries (France, Spain, and Belgium) that could result a
significant loss of market share for steel. The steel industry must be ready to provide strong technical arguments and solutions to avoid the introduction of
excessive fire resistance requirements in the single storey field throughout Europe. With this aim, an ECSC Project called “Fire Safety of Industrial hall and
low rise building” has been finalized last year.
Significant and encouraging results have been obtained during this project.
The aim is to disseminate all the results obtained during this project by :
- the redaction of a design guide that provides a way to guarantee the safety of occupants and firemen through alternatives to prescriptive ISO fire
requirements
- the organization of workshop including local authorities and firemen
State of progress:
Partners
218
(CO)
ARCELOR PROFIL
Responsible: Ms. Renata OBIALA
Direct line: +(352) 531 33 807
Direct fax: +(352) 531 32 199
S.A.
Department: LCE Research Centre
e-mail: renata.obiala@arcelormittal.com
(P)
CTICM
Direct line: +(33) 1/30 85 20 73
Organisation: CTICM
Direct fax: +(33) 1/30 85 37 29
(P)
FUNDACION LABEIN
Direct line: +(34) 94/607 33 88
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
(P)
Ulg
Organisation: ULG
Direct line: +(32) 4/366 92 65
Direct fax: +(32) 4/366 95 34
UNIVERSITE DE LIEGE
BE-4000 LIEGE
Contract N°
RFS2-CT-2007-00033
Reference N°
TGS8.06/07
369.384
221.630
Duration
Dates:
18 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2008 31/12/2008
Title: Human induced vibration of steel structures
Acronym HiVoSS
:
The use of modern high strength steels allows the design of more slender and light weight structures.
However with increasing slenderness sensitivity of structures to vibrations rises.
An ECSC research project concerning floor vibrations and a RFCS project concerning vibrations of footbridges were carried out to study how to deal with
vibration level in light weight structures.
The project proposed here aims at the promotion of the combined knowledge gained in the two projects specified above that provide already drafts of
guidelines. The promotion covers the preparation of a guideline for vibration design with worked examples, concise background information, preparation of
presentations and performance of seminars.
State of progress:
Partners
219
(CO)
RWTH
Responsible: Dr -Ing Christoph HEINEMEYER
Organisation: RWTH
Direct line: +(49) 241/80 252 19
Direct fax: +(49) 241/80 221 40
e-mail: hei@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
TNO
Responsible: Dr Ir Paul H. WAARTS
Organisation: TNO
Direct line: +(31) 15/276 3231
Direct fax: +(31) 15/276 3018
TNO CENTRE FOR FIRE RESEARCH
e-mail: paul.waarts@tno.nl
Address: Van Mourik Broekmanweg 6
NL-2628 XE DELFT
(P)
SCI
Organisation: SCI
Direct line: +(44) 1344/623 345
Direct fax: +(44) 1344/622 944
(P)
ARCELOR PROFIL
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
(P)
UNIV PORTO
Responsible: Prof. Elsa CAETANO
Organisation: UNIV PORTO
Direct line: +(351) 22/508 19 04
Direct fax: +(351) 22/508 18 35
FACULDADE DE ENGENHARIA DA
UNIVERSIDADE DO PORTO
Address: Rua Doutor Roberto Frias, s/n
e-mail: ecaetano@fe.up.pt
PT-4200-465 PORTO
(P)
CTICM
Responsible: Dr Mladen LUKIC
Organisation: CTICM
Direct line: +(33) 1/60 13 83 68
Direct fax: +(33) 1/60 13 70 84
e-mail: mlukic@cticm.com
Immeuble Apollo
(P)
SBP
Responsible: Dr Arndt GOLDACK
Organisation: SBP
Direct line: +(49) 711/648 71 0
Direct fax: +(49) 711/648 71 66
SBP GmbH - SCHLAICH BERGERMANN &
PARTNER
Address: Hohenzollernstraße 1
e-mail: a.goldack@sbp.de
DE-70178 STUTTGART
220
Contract N°
RFSR-CT-2007-00035
Reference N°
TGS8.07/07
1.548.637
929.183
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Innovative and competitive new joining technology for steel pipes using adhesive bonding
Acronym JOINTEC
:
This research work will introduce the pace developments in adhesive bonding technology of recent years into the steel pipe industry. The aim of this
project is to increase the competitiveness of European steel pipe industry by developing an innovative and competitive bonding technology for steel pipes
distributing gas, water and heat.
Objectives:
- Development of an efficient, integrated and easy-to-use technique for adhesive bonding of steel pipes based on an interdisciplinary collaboration between
leading research institutes, adhesive industry and pipe industry including end users;
- Development of guidelines, design calculation methods and non-destructive testing methods including a repair concept for adhesively bonded steel pipes.
State of progress:
Partners
(CO)
UNIV PADERBORN
Responsible: Prof. Dr Ortwin HAHN
Direct line: +(49) 5251/60 30 30
Direct fax: +(49) 5251/60 32 39
UNIVERSITÄT-GESAMTHOCHSCHULE
PADERBORN
Department: Laboratorium für Werkstoff - und Fügetechnik
Address: Pohlweg 47-49
e-mail: ortwin.hahn@lwf.uni-paderborn.de
DE-33098 PADERBORN
(P)
SZMF
Responsible: Dr Thomas ORTH
Direct line: +(49) 203/999 32 34
Organisation: SZMF
Fax: +(49)
GmbH
Department: Nondestructive Testing
e-mail: t.orth@du.szmf.de
DE-47259 DUISBURG
(P)
GDF
Responsible: Eng Geoffray WOLVERT
Organisation: GAZ DE FRANCE
Direct line: +(33) 1/49 22 50 16
Direct fax: +(33) 1/49 22 58 91
GAZ DE FRANCE
e-mail: geoffray.wolvert@gazdefrance.com
Address: Av. Du Président Wilson 361
FR-93211 LA PLAINE SAINT DENIS CEDEX
(P)
SIKA DK
Responsible: Chem Eng Karen KIRKETERP
Organisation: SIKA DK
Direct line: +(45) 48/188 585
Direct fax: +(45) 48/188 496
SIKA DANMARKS A/S* SIKA-BETON SIKA
CUFADAN
Address: Praestemosevej 2-4
e-mail: kirketerp.karen@dk.sika.com
Asminderod
DK-3480 FREDENSBORG
(P)
BDP
Responsible: Dipl -Ing Erwin BEHRENDES
Organisation: BOHLEN & DOYEN
Direct line: +(48) 95/742 17 19
Direct fax: +(48) 95/742 17 19
BOHLEN & DOYEN POLSKA Sp. Z.o.o.
e-mail: e.behrendes@bohlen-doyen.com
Address: Ul. Piastowska 10b/8
PL-66 300 MIEDZYRZECZ
221
(P)
CSM
Responsible: Dr Ing Giuseppe DEMOFONTI
Organisation: CSM
Direct line: +(39) 06/505 54 56
Direct fax: +(39) 06/505 54 52
e-mail: g.demofonti@c-s-m.it
IT-00128
(P)
MANNESMANN FUCHS R
Responsible: Dr Hendrik LÖBBE
Direct line: +(49) 2381/420 442
Organisation: MANNESMANN FUCHS ROHR
Direct fax: +(49) 2381/420 454
MANNESMANN FUCHS ROHR GMBH
e-mail: hendrik.loebbe@mannesmann-fuchs.com
Department: R&D
Address: In der Steinwiese 31
DE-57074 SIEGEN
(P)
AGFW
Responsible: Dipl -Ing Rolf BESIER
Direct line: +(49) 69/6304 346
Organisation: AGFW
Direct fax: +(49) 69/6304 455
ARBEITSGEMEINSCHAFT FÜR WÄRME UND
HEIZKRAFTWIRTSCHAFT (AGFW)
Department: Technical and Norms Dept
Address: Stresemannallee 28
e-mail: r.besier@agfw.de
DE-60596 FRANKFURT AM MAIN
Contract N°
RFSR-CT-2007-00036
Reference N°
TGS8.08/07
881.196
528.717
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Development of innovative steel-glass-structures in respect to structural and architectural design
Acronym INNOGLAST
:
Currently, steel-glass constructions are favourably used in modern architecture. This proposal addresses the design of new and innovative steel-glassstructures in respect to architectural, static-structural and fabrication criteria. Different types of steel-glass constructions are analysed or even newly
developed focusing on an optimal structural interaction between steel and glass. The research includes steelsupported glazing systems and the development
of a new hybrid steel-glass beam, consisting of steel flanges and a glass web, all of which can be used in facades, roofs, atria etc. Thus, glass is used as a
stiffened as well as a full bearing element in steel-glass constructions. Consequently, the research project will produce comprehensive solutions for
innovative steel-glass-structures. The need for the projected research is pointed out in the “European Steel Technology Platform” ESTEP 2006 which
actually defines the design of steel-glass structures as a short-term research area.
State of progress:
Partners
(CO)
RWTH
Responsible: Dipl -Ing Mascha BAITINGER
Organisation: RWTH
Direct line: +(49) 241/80 25 823
Direct fax: +(49) 241/80 22 140
e-mail: baitinger@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
UNIV DORTMUND
Responsible: Prof. Dr.-Ing. Dieter UNGERMANN
Direct line: +(49) 231/755 4770
Direct fax: +(49) 231/755 2486
TECHNISCHE UNIVERSITÄT DORTMUND
e-mail: dieter.ungermann@uni-dortmund.de
Address: August-Schmidt-Strasse 4
DE-44221 DORTMUND
222
(P)
SCI
Direct line: +(44) 1344/623 345
Organisation: SCI
Direct fax: +(44) 1344/622 944
(P)
UNIV PRAGUE
Responsible: Ing CSc Martina ELIÁŠOVÁ
Direct line: +(420) 2/243 54 921
Direct fax: +(420) 2/33 334 766
Address: Zikova 4
e-mail: eliasova@fsv.cvut.cz
CZ-166 36 PRAGUE 6
(P)
CSTB
Responsible: Dr Adrian PANAIT
Direct line: +(33) 1/64 68 89 63
Organisation: CSTB
Direct fax: +(33) 1/64 68 85 34
BATIMENT
e-mail: a.panait@cstb.fr
Contract N°
RFSR-CT-2007-00037
Reference N°
TGS8.09/07
645.282
387.169
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Economics of steel framed buildings in Europe
Acronym ESE
:
This proposal is intended to provide a web-based costing tool for designers of steel framed buildings in Europe, which will enable them to develop costeffective steel solutions at the development stages of a project. It will be developed using the latest cost-modelling techniques for the overall building cost,
and will include a simple facility for incorporating the latest cost rates. The scope of the tool will include multistorey commercial and residential buildings,
and single-storey industrial buildings. No such information is currently available for practitioners, and it is intended that the provision of this will expand
the market for steel.
State of progress:
Partners
(CO)
SCI
Responsible: Dr Bassam BURGAN
Organisation: SCI
Direct line: +(44) 1344/636 525
Direct fax: +(44) 1344/636 570
e-mail: b.burgan@steel-sci.com
(P)
ARCELOR PROFIL
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
223
(P)
UNIV POZNAN
Responsible: Prof. Andrzej GARSTECKI
Organisation: UNIV POZNAN
Direct line: +(48) 61/665 24 06
Direct fax: +(48) 61/876 61 16
POLITECHNIKA POZNANSKA*POZNAN
UNIVERSITY OF TECHNOLOGY
Address: Pl Marii Sklodowskiej Curie 5
e-mail: andrzej.garstecki@put.poznan.pl
PL-60-965 POZNAN
(P)
BMS
Responsible: Mr Ralph HAMERLINCK
Organisation: BMS
Direct line: +(31) 79/353 12 77
Direct fax: +(31) 79/353 12 78
BOUWEN MET STAAL
e-mail: ralph@bouwenmetstaal.nl
Address: Boerhaavelaan 40
NL-2713 HX ZOETERMEER
Contract N°
RFSR-CT-2007-00038
Reference N°
TGS8.10/07
2.026.994 1.216.196
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Prefabricated steel structures for low-rise buildings in seismic areas
Acronym PRECASTEEL
:
Low-rise buildings are obviously extensively used for industrial and commercial activities. Nowadays, most of these buildings are built by prefabricated
concrete elements that are well known to suffer from an intrinsic weakness due to low efficiency of connections and a lower ductility performance when
subjected to earthquake loading. The proposal aims at defining prefabricated steel solutions for realising single-storey industrial and lowrise commercial
buildings in earthquake-prone areas, able to satisfy requirements of industrial and commercial activities.
An automated integrated design software with cost-effectiveness analysis module will be realised to favour the use of proposed solutions in common design
practice.
State of progress:
Partners
(CO)
ILVA
Organisation: ILVA
Direct line: +(39) 010/607 86 26
Direct fax: +(39) 010/607 99 53
ILVA
(P)
UNIV CAMERINO
Responsible: Prof. Andrea DALL'ASTA
Organisation: UNICAM
Direct line: +(39) 320/79 850
Direct fax: +(39) 0736/249 672
UNIVERSITÀ DI CAMERINO, Dip. di Proget. e
Costruzione dell' Ambiente
Department: Dip. Di Progettazione e Costruzionz dell'Ambiente
Address: Viale della Rimembranza
e-mail: a.asta@tin.it
IT-63100 ASCOLI PICENO
(P)
RWTH
Direct line: +(49) 241/8025 183
Direct fax: +(49) 241/8022 140
DE-52074 AACHEN
224
(P)
UNIV THESSALY
Responsible: Dr Spyros A. KARAMANOS
Direct line: +(30) 2421/0740 86
Direct fax: +(30) 2421/0740 12
LABORATORY
e-mail: skara@mie.uth.gr
GR-38334 VOLOS
(P)
UNIV PISA
Direct line: +(39) 050/835 725
Direct fax: +(39) 050/554 597
IT-56126 PISA
(P)
UNIV NAVARRA
Responsible: Prof. Eduardo BAYO
Organisation: UNIV NAVARRA
Direct line: +(34) 948/42 56 00
Direct fax: +(34) 948/42 56 29
UNIVERSIDAD DE NAVARRA
e-mail: ebayo@unav.es
Department: Escuela de Arquitectura
Address: Carrer Logrono s/n
Edificio Central
ES-31080 PAMPLONA
(P)
FERRIERE NORD
Responsible: Dr. Loris BIANCO
Direct line: +(39) 0432/062 844
Organisation: FERRIERE NORD
Direct fax: +(39) 0432/062 853
FERRIERE NORD S.P.A.
e-mail: lbianco@pittini.it
Address: S.S. 463 Zona Industriale
Rivoli di Osoppo
IT-33010 OSOPPO-UDINE
(P)
SHELTER
Responsible: Eng Prokopis TSINTZOS
Organisation: SHELTER
Direct line: +(30) 2410/575 430
Direct fax: +(30) 2410/575 432
SHELTERANONYMOS VIOMICHANIKI ETAIRIA
EPENDYSEON KAI KATASKEVON
Address: 6th km Larissa - Sykourio
e-mail: shelter@lar.forthnet.gr
GR-41500 LARISSA
(P)
ISQ
Responsible: Mrs Sandra ESTANISLAU
Organisation: ISQ
Direct line: +(351) 21/214 229 048
Direct fax: +(351) 21/214 229 018
e-mail: scestanislau@isq.pt
Talaide
(P)
VTT
Responsible: Dr Ludovic FULOP
Direct line: +(358) 20/722 6924
Organisation: VTT
Fax: +(358)
FINLAND
e-mail: ludovic.fulop@vtt.fi
FI-02044 VTT ESPOO
225
Contract N°
RFSR-CT-2007-00039
Reference N°
TGS8.11/07
1.394.388
836.634
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Optimizing the seismic performance of steel and steel-concrete structures by standardizing material quality control
Acronym OPUS
:
Despite modern seismic standards, like Eurocode 8, admit ductile design of steel and composite structures, current European production standards don’t
provide adequate limitations on steel mechanical properties limiting free application of such approach.
Additional safety factors and design checks, aiming to guarantee optimal plastic hinges’ location, must be foreseen, reducing practical applicability and
possible advantages of seismic ductile design.
The proposal aims at the definition of harmonised production and structural recommendations specifically for seismic areas, allowing design of ductile
structures without any supplementary assessments on materials.
Competitiveness, cheapness and safety of steel solutions in earthquake-prone areas will be highly increased.
State of progress:
Partners
(CO)
RIVA
Responsible: Dr -Ing Mirko FINETTO
Direct line: +(39) 045/805 8111
Direct fax: +(39) 045/805 8594
e-mail: laboratorio.verona@rivagroup.com
IT-37133 VERONA
(P)
Ulg
Responsible: Dr Hervé DEGEE
Organisation: ULG
Direct line: +(32) 4/366 92 85
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
e-mail: h.degee@ulg.ac.be
Department: FNRS
BE-4000 LIEGE 1
(P)
RWTH
Direct line: +(49) 241/8025 183
Direct fax: +(49) 241/8022 140
DE-52074 AACHEN
(P)
UNIV THESSALY
Direct line: +(30) 2421/0740 86
Direct fax: +(30) 2421/0740 12
LABORATORY
GR-38334 VOLOS
(P)
ARCELOR PROFIL
Responsible: Mr Boris DONNAY
Direct line: +(352) 53/13 21 74
Direct fax: +(352) 54/79 64
S.A.
e-mail: boris.donnay@arcelormittal.com
226
(P)
INSA
Responsible: Prof. Mohammed HJIAH
Direct line: +(33) 2/23 23 87 11
Organisation: INSA
Direct fax: +(33) 2/23 23 84 48
INSTITUT NATIONAL DES SCIENCES
APPLIQUEES DE RENNES
Department: Structural Engineering Research Group
Address: 20, Avenue des Buttes de Coësmes
e-mail: mohammed.hjiah@insa-rennes.fr
FR-35043 RENNES CEDEX
(P)
UNIV PISA
Direct line: +(39) 050/835 725
Direct fax: +(39) 050/554 597
IT-56126 PISA
Contract N°
RFSR-CT-2007-00040
Reference N°
TGS8.12/07
1.108.870
665.322
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Optimisation and improvement of the flame straightening process
Acronym OPTISTRAIGHT
:
The research proposal “OPTISTRAIGHT” aims at the improvement of the manufacturing process for geometry achieving of elements and members out of
structural steel, leading to a significant enhancement of the competitiveness of steel construction elements for the construction, crane, ship and machinery
industry.
This objective will be achieved by proofing the efficiency and feasibility of the flame straightening procedures to be researched. These procedures will
result into more precise geometry, less detrimental effect on the material, less energy input, quicker and healthier production and thus improved economical
positions avoiding expensive repair work.
State of progress:
Partners
(CO)
RWTH
Responsible: Dipl -Ing Dirk TSCHICKARDT
Organisation: RWTH
Direct line: +(49) 241/80 25219
Direct fax: +(49) 241/80 22140
e-mail: tschickardt@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
ARCELOR PROFIL
Responsible: Mr Boris DONNAY
Direct line: +(352) 53/13 21 74
Direct fax: +(352) 54/79 64
S.A.
e-mail: boris.donnay@arcelormittal.com
(P)
UNIV LJUBLJANA
Responsible: Prof. Darko BEG
Organisation: UNIV LJUBLJANA
Direct line: +(386) 1/476 86 26
Direct fax: +(386) 1/476 86 29
UNIVERZA V LJUBLJANI
e-mail: dbeg@fgg.uni-lj.si
Department: Chair for Metal Structures
Address: Kongresni Trg 12
SI-1000 LJUBLJANA
227
(P)
UNIV CANTABRIA
Responsible: Prof. Federico GUTIERREZ-SOLANA
Organisation: UNIV CANTABRIA
Direct line: +(34) 942/20 18 19
Direct fax: +(34) 942/20 18 18
UNIVERSIDAD DE CANTABRIA - DPTO DE
CIENCIA E ING. DEL TERRENO Y MAT.
Address: Ets de Ing. de caminos canales y puertos
e-mail: gsolana@unican.es
Avenida de los Castros s/n
ES-39005 SANTANDER
(P)
AGDH
Responsible: Dr.-Ing. Falko SCHRÖTER
Organisation: AGDH
Direct line: +(49) 6831/47 31 94
Direct fax: +(49) 6831/47 30 89
HÜTTENWERKE
Department: Marketing
e-mail: falko.schroeter@dillinger.biz
Contract N°
RFSR-CT-2007-00041
Reference N°
TGS8.13/07
2.174.118 1.304.471
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Special components and strain based requirements for high strength high pressure pipeline applications
Acronym LINESPEC
:
Aim of the proposal is the development of high performance pipe components and specific technical know-how about the in-service behaviour of large
diameter gas pipelines grade X100. Specific goals are:
- Development of design tools for optimisation of crack arrestors, which guarantee safe pipeline operation, regarding ductile fracture propagation events;
- Development/qualification of hot bends grade X100;
- Identification of minimum requirements of ductile steel pipe properties for a safe strainbased design of grade X100 gas pipelines.
All these aims will be achieved by an extensive use of both industrial trials / prototype production and small and full scale testing.
State of progress:
Partners
(CO)
SZMF
Responsible: Mrs. Marion ERDELEN-PEPPLER
Organisation: SZMF
Direct line: +(49) 203/999 3182
Direct fax: +(49) 203/999 4352
GmbH
e-mail: m.erdelen-peppler@du.szmf.de
DE-47259 DUISBURG
(P)
OCAS
Responsible: Ir Frederik VANHEE
Organisation: OCAS
Direct line: +(32) 09/345 13 14
Direct fax: +(32) 09/345 12 04
Department: Steel Solutions and Design
e-mail: frederik.vanhee@arcelormittal.com
BE-9060 ZELZATE
(P)
BPX
Responsible: Dr Norman SANDERSON
Organisation: BPX
Direct line: +(44) 1932/762 920
Direct fax: +(44) 1932/738 414
BP EXPLORATION OPERATING COMPANY LTD
e-mail: norman.sanderson@uk.bp.com
Department: Pipeline Design
Address: Chertsey Road
GB- SUNBURY ON THAMES TW16 7BP
228
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/505 54 56
Direct fax: +(39) 06/505 54 52
IT-00128
(P)
CORUS UK
Responsible: Dr. Peter L. HARRISON
Direct line: +(44) 1709/825 296
Direct fax: +(44) 1709/825 337
CENTRE
Department: Transport Applications
e-mail: peter.harrison@corusgroup.com
Rotherham
(P)
ISQ
Direct line: +(351) 21/422 81 96
Organisation: ISQ
Direct fax: +(351) 21/422 81 26
Talaide
(P)
RWTH
Responsible: Prof. Dr -Ing Wolfgang BLECK
Organisation: RWTH
Direct line: +(49) 241/80 95 783-782
Direct fax: +(49) 241/80 92 2253
Department: Ferrous Metallurgy
DE-52072 AACHEN
(P)
UGENT
Responsible: Prof. Rudi DENYS
Direct line: +(32) 9/264 32 53
Organisation: UNIV GENT
Direct fax: +(32) 9/264 78 85
UNIVERSITEIT GENT
e-mail: rudi.denys@ugent.be
Address: Sint-Pietersnieuwstraat 41
BE-9000 GENT
Contract N°
RFSR-CT-2007-00042
Reference N°
TGS8.14/07
1.621.359
972.816
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Fire resistance of long span cellular beam made of rolled profiles
Acronym FICEB
:
Cellular beams (CB) offer long uninterrupted clear spans, which are ideal for offices. However, increasingly, questions are being asked about the
performance of CB in fire and especially, about the performance of the protection material.
A uniform European design approach is required to overcome the present lack of knowledge. This should include both protected and unprotected beams
fabricated from hot rolled sections. The design approach will be developed using standard furnace fire resistance tests, a large full sized test and numerical
simulations. It will lead to reduced amounts of fire protection, more economic designs and an increase use of CB.
State of progress:
Partners
229
(CO)
ARCELOR PROFIL
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
(P)
WESTOK
Responsible: Mr Michael HAWES
Organisation: WESTOK
Direct line: +(44) 1924/264 121
Direct fax: +(44) 1924/280 030
WESTOK LIMITED
e-mail: mike.hawes@westok.co.uk
Address: Horbury Junction Industrial Estate
GB- WAKEFIELD WF4 5ER
(P)
SCI
Responsible: Dr Ian SIMMS
Organisation: SCI
Direct line: +(44) 1344/623 345
Direct fax: +(44) 1344/622 944
e-mail: i.simms@steel-sci.com
(P)
CTICM
Organisation: CTICM
Direct line: +(33) 1/30 85 20 73
Direct fax: +(33) 1/30 85 37 29
(P)
Ulg
Organisation: ULG
Direct line: +(32) 4/366 92 65
Direct fax: +(32) 4/366 95 34
UNIVERSITE DE LIEGE
BE-4000 LIEGE
(P)
UNIV ULSTER
Responsible: Dr Ali NADJAI
Direct line: +(44) 2890/368 294
Organisation: UNIV ULSTER
Direct fax: +(44) 2890/368 700
UNIVERSITY OF ULSTER
e-mail: a.nadjai@ulst.ac.uk
Department: Structural Fire Research Group
Address: Shore Road
Newtownabbey
GB- BELFAST BT37 0QB
230
Contract N°
RFSR-CT-2007-00043
Reference N°
TGS8.15/07
1.286.507
771.904
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Renovation of buildings using steel technologies
Acronym ROBUST
:
ROBUST addresses the renovation and improvement of existing buildings using steel-based technologies. It focuses on the particular issues in residential,
industrial and commercial buildings and on techniques such as over-cladding, roof-top extensions and retrofit of timber roofs by steel. The scope of work
concentrates on both building technology and building physics questions, particularly where overcladding of the existing building greatly reduces the heat
loss through the façade or roof. An economic and sustainability assessment of these techniques will be made.
State of progress:
Partners
(CO)
SCI
Organisation: SCI
Direct line: +(44) 1344/636 525
Direct fax: +(44) 1344/636 570
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
DE-52074 AACHEN
(P)
VTT
Responsible: Mr Jyri NIEMINEN
Organisation: VTT
Direct line: +(358) 20/722 111
Direct fax: +(358) 20/722 7055
FINLAND
e-mail: jyri.nieminen@vtt.fi
FI-02044 VTT ESPOO
(P)
CTICM
Responsible: Mr Stéphane HERBIN
Organisation: CTICM
Direct line: +(33) 1/30 85 20 55
Direct fax: +(33) 1/30 85 21 34
Department: Head of sustainable development section
e-mail: sherbin@cticm.com
Immeuble Apollo
(P)
ARCELOR RES LIEGE
Responsible: Ir Clarisse MEES
Direct line: +(32) 4/236 88 20
Direct fax: +(32) 4/236 88 98
e-mail: clarisse.mees@arcelormittal.com
BE-4000 LIEGE
231
(P)
CORUS UK
Responsible: Mr Allan R. GRIFFIN
Direct line: +(44) 1709/825 508
Direct fax: +(44) 1709/825 337
CENTRE
Department: c/o Construction Applications Department
e-mail: allan.griffin@corusgroup.com
Rotherham
(P)
PRZ
Responsible: Prof. Aleksander KOZLOWSKI
Organisation: PRZ
Direct line: +(48) 17/854 11 27
Direct fax: +(48) 17/854 11 27
POLITECHNIKA RZESZOWSKA IM. I.
LUKASIEWICZA - RZESZOW UNIV OF TECHN.
Department: International and Regional Cooperation
Address: Wincentego Pola 2
e-mail: rw@prz.edu.pl
PL-35 959 RZESZOW
Contract N°
RFSR-CT-2007-00044
Reference N°
TGS8.16/07
1.080.599
648.359
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Unbraced composite structures in fire
Acronym UCoSiF
:
Bracing of buildings is traditionally realized through concrete cores giving lateral support to composite structures, whereas in modern composite buildings
unbraced frames are applied. However, current design rules in fire–related part of Eurocode 4 are limited to non–sway buildings with efficient bracing
systems.
Since there are numerous advantages linked with unbraced composite structures, as enhanced flexibility concerning usable space, simple calculation
methods need to be developed allowing for economic design of this structural system. The proposed development of new design tools will be based on
numerical and experimental work and should be incorporated in Eurocodes for broad dissemination.
State of progress:
Partners
(CO)
UNIV HANNOVER
Responsible: Prof. Dr -Ing Peter SCHAUMANN
Direct line: +(49) 511/762 37 81
Direct fax: +(49) 511/762 29 91
UNIVERSITY OF HANNOVER - INSTITUTE FOR
STEEL CONSTRUCTION
Address: Appelstraße 9a
e-mail: schaumann@stahl.uni-hannover.de
DE-30167 HANNOVER
(P)
CTICM
Responsible: Dr Christophe RENAUD
Organisation: CTICM
Direct line: +(33) 3/31 30 85 25 23
Direct fax: +(33) 3/31 30 85 37 29
Department: Fire research section
e-mail: crenaud@cticm.com
Immeuble Apollo
232
(P)
UNIV LONDON
Responsible: Prof. Kuldeep VIRDI
Direct line: +(44) 20/7040 8142
Organisation: UNIV LONDON
Direct fax: +(44) 20/7040 8570
CITY UNIVERSITY
e-mail: k.s.virdi@city.ac.uk
Department: Structural Engineering
Address: Northampton Square
GB- LONDON EC1V 0HB
(P)
FUNDACION LABEIN
Direct line: +(34) 94/607 33 88
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
(P)
HOCHTIEF
Responsible: Dr Bernhard HAUKE
Direct line: +(49) 69/7117 2468
Organisation: HOCHTIEF
Direct fax: +(49) 69/7117 2948
HOCHTIEF CONSTRUCTION AG
e-mail: bernhard.hauke@hochtief.de
Department: Design
Address: Lyoner Str. 25
DE-60528 FRANKFURT AM MAIN
Contract N°
RFSR-CT-2007-00050
Reference N°
TGS8.17/07
2.214.354 1.328.613
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Steel solutions for seismic retrofit and upgrade of existing constructions
Acronym STEELRETRO
:
The majority of existing buildings are in need of seismic retrofit. The main reasons are: the original design was not optimised with respect to the required
safety level, poor construction quality, modifications or enlargements of buildings during their life and increase in the requirements of the seismic design.
Even if steel solutions can often be more efficient and economic, their possibilities are practically unknown and their application has been limited to a few
particular cases. The aim of the research proposal is to set up steel solutions for the seismic retrofit of existing buildings, furnishing design and construction
methodologies, tools for dimensioning of elements and connections as well as for cost estimation.
State of progress:
Partners
(CO)
RIVA
Organisation: ILVA
Direct line: +(39) 010/607 86 26
Direct fax: +(39) 010/607 99 53
ILVA
(P)
UNIV ROMA
Responsible: Prof. Franco BRAGA
Organisation: UNIV ROMA
Direct line: +(39) 06/44 58 51 56
Direct fax: +(39) 06/48 84 852
C. DI RICERCA CERI PREV. PREVENZIONE E
CONTROLLO DEI RISCHI GEOLOGICI
Address: UNIV DEGLI STUDI LA SAPIENZA
e-mail: franco.braga@uniroma1.it
Piazza Umberto Pilozzi 9
IT-00038 VALMONTONE (ROMA)
233
(P)
RWTH
Direct line: +(49) 241/8025 183
Direct fax: +(49) 241/8022 140
DE-52074 AACHEN
(P)
UNIV THESSALY
Direct line: +(30) 2421/0740 86
Direct fax: +(30) 2421/0740 12
LABORATORY
GR-38334 VOLOS
(P)
ARCELOR PROFIL
Responsible: Mr Mike HALLER
Direct line: +(352) 5313/21 66
Direct fax: +(352) 5313/21 99
S.A.
Department: Marketing Intelligence Department
e-mail: mike.haller@arcelormittal.com
(P)
SHELTER
Responsible: Eng Prokopis TSINTZOS
Organisation: SHELTER
Direct line: +(30) 2410/575 430
Direct fax: +(30) 2410/575 432
SHELTERANONYMOS VIOMICHANIKI ETAIRIA
EPENDYSEON KAI KATASKEVON
Address: 6th km Larissa - Sykourio
e-mail: shelter@lar.forthnet.gr
GR-41500 LARISSA
(P)
ISQ
Responsible: Mrs Sandra ESTANISLAU
Organisation: ISQ
Direct line: +(351) 21/214 229 048
Direct fax: +(351) 21/214 229 018
e-mail: scestanislau@isq.pt
Talaide
(P)
UNIV PISA
Direct line: +(39) 050/835 725
Direct fax: +(39) 050/554 597
IT-56126 PISA
(P)
UNIV TIMISOARA
Responsible: Prof. Dan DUBINA
Organisation: UNIV TIMISOARA
Direct line: +(40) 256/403 920
Direct fax: +(40) 256/403 932 17
UNIVERSITATEA POLITEHNICA DIN
TIMISOARA
Department: CEMSIG - Steel Structures and Structural Mechanics
Address: Piata Victorei, 2
e-mail: dan.dubina@ct.upt.ro
RO-300006 TIMISOARA
234
(P)
REGIONE TOSCANA
Responsible: Arch Maurizio FERRINI
Direct line: +(39) 055/438 90 60
Organisation: REGIONE TOSCANA
Direct fax: +(39) 055/438 90 72
REGIONE TOSCANA
e-mail: maurizio.ferrini@regione.toscana.it
Address: Via Cavour 18
IT-50100 FIRENZE
(P)
VTT
Responsible: Dr Ludovic FULOP
Direct line: +(358) 20/722 6924
Organisation: VTT
Fax: +(358)
FINLAND
e-mail: ludovic.fulop@vtt.fi
FI-02044 VTT ESPOO
Contract N°
RFSR-CT-2007-00051
Reference N°
TGS8.18/07
773.439
464.063
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: New market chances for steel structures by innovative fastening solutions
Acronym InFaSo
:
"Innovative Fastening Solutions" (InFaSo) promotes and encourages the wider use of steel in building structures where until now only concrete has been
used. This is achieved by simple, efficient joints allowing for quick and easy connection of steel beams / columns to concrete structures with large
tolerances.
These joints also allow easy removal, strengthening and application for renovation by a simplified manufacturing and an enlargement of the design strength
and ductility. The results will be prepared in the form of a handbook and electronic construction aids so that also engineers not used to design in steel are
able to implement them. Thus “InFaSo” opens the gate for new market chances for steel structures and decisively enhance the competitive position of the
European steel construction sector.
State of progress:
Partners
(CO)
USTUTT
Responsible: Prof. Dr Ulrike KUHLMANN
Direct line: +(49) 711/685 662 45
Direct fax: +(49) 711/685 662 36
e-mail: u.kuhlmann@ke.uni-stuttgart.de
Department: Institute of Structural Design
DE-70569 STUTTGART
(P)
UNIV PRAGUE
Responsible: Prof. -Ing CSc Frantisek WALD
Direct line: +(420) 2/24 354 757
Direct fax: +(420) 2/33 334 766
Address: Zikova 4
e-mail: wald@fsv.cvut.cz
CZ-166 36 PRAGUE 6
(P)
GIPAC
Responsible: Prof. Dr. Luis SIMOES DA SILVA
Organisation: GIPAC
Direct line: +(351) 91/663 7161
Direct fax: +(351) 24/972 0931
GABINETE DE INFORMATICA E PROJECTO
ASSISTIDO POR COMPUTADOR LDA
Address: Trav. Padre Manuel da Nobrega 17, 4° Dto
e-mail: luis_silva@gipac./pt
PT-3000-323 COIMBRA
235
(P)
GOLDBECK
Responsible: Dr Rolf HEDDRICH
Direct line: +(49) 521/9488 2450
Organisation: GOLDBECK
Direct fax: +(49) 521/9488 2449
GOLDBECK WEST GmbH
e-mail: rolf.heddrich@goldbeck.de
Address: Ummelner Straße 4-6
DE-33649 BIELEFELD
(P)
S+V
Responsible: Dr Norbert SAUERBORN
Direct line: +(49) 6103/9862 13
Organisation: S+V
Direct fax: +(49) 6103/9862 44
STAHL + VERBUNDBAU GESELLSCHAFT FÜR
INDUSTRIELLES BAUEN MBH
Address: Im Steingrund 8
e-mail: n.sauerborn@stahlverbundbau.de
DE-63303 DREIEICH
Contract N°
RFS2-CT-2008-00030
Reference N°
TGS8.01/08
797.061
478.236
Duration
Dates:
12 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2009 30/06/2009
Title: Facilitating market development for sections in industrial halls and low-rise buildings
Acronym SECHALO
:
A growth of construction market indicates opportunities for steel industry to increase European market share especially for single storey and low-rise multistorey industrial buildings. Steel producers, namely Peiner Träger, Corus and ArcelorMittal collaborate in order to achieve this goal by providing design
guidance and harmonized standards and by promoting these tools widely to designers and architects. This project with produce a simple, comprehensive
and harmonised design guides for the two types of buildings mentioned, which will be based on the state of the art and best practise extracted from previous
RFCS projects. Cooperation with IPOs enables also compliance of the guides with national regulations.
State of progress:
Partners
(CO)
ARCELOR PROFIL
Responsible: Ms. Renata OBIALA
Direct line: +(352) 531 33 807
Direct fax: +(352) 531 32 199
S.A.
Department: LCE Research Centre
e-mail: renata.obiala@arcelormittal.com
(P)
CORUS UK
Responsible: Mr Richard DIXON
Direct line: +(44) 1709/82 55 78
Direct fax: +(44) 1709/03 12 48
CENTRE
Department: Construction Support
e-mail: richard.dixon@corusgroup.com
Rotherham
(P)
PEINER TRAGER
Responsible: MSc. Kai BOHMBACH
Organisation: PEINER TRAGER
Direct line: +(49) 5171/91 90 59
Direct fax: +(49) 5171/91 32 03
PEINER TRÄGER GmbH
e-mail: bohmbach.k@salzgitter-ag.de
Department: Technical Sales
Address: Gerhard-Lucas-Meyer-Strasse 10
DE-31226 PEINE
236
Contract N°
RFS3-CT-2008-00031
Reference N°
TGS8.02/08
24.750
24.750
Duration
Dates:
12 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2009 30/06/2009
Title: Investigation into fracture mechanics and ductile fracture propagation in fibre laser welded high strength steel
The main research objectives devised to provide fracture mechanics behaviour of the fibre laser welded high strength steel
- to select and/or develop alternative method for the fracture mechanics of the fibre laser welded hig strength steel
- to implement local fracture mechanics rules in welded materials to be used in conjunction with fibre laser welded high strength steel
- to establish a relationship between welding procedure (fibre laser parameters, clamping, pre-heat, etc.) and fracture initiation in fibre laser welded high
strength steels
- to develop fibre laser welding process parameters allowing joining of high steels with satisfactory fracture and metallurgical properties
- to elaborate a catalogue of metallurgical, mechanical properties of fibre laser welds in modern high strength steels, allowing the establishment of
structure/property relationships
- to describe material solidification in fusion zone as a function of fibre laser welding process characteristics and its structural integrity.
State of progress:
Research stopped; no publication foreseen
Partners
(MC)
GKSS
Responsible: Dr. Mustafa KOÇAK
Direct line: +(49) 4152/87 2536
Organisation: GKSS
Direct fax: +(49) 4152/87 2549
GKSS-FORSCHUNGSZENTRUM GEESTHACHT
GmbH
Department: Institut für Werkstofforschung
e-mail: mustafa.kocak@gkss.de
DE-21502 GEESTHACHT
Contract N°
RFSR-CT-2008-00032
Reference N°
TGS8.03/08
741.351
444.810
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Dissipative devices for seismic resistant steel frames
Acronym FUSEIS
:
Two innovative types of seismic resistant steel frames with dissipative fuses will be developed.
The dissipative zones in such frames will be the fuses, while the other parts of the structure will be protected against inelastic deformations. In case of
strong earthquakes damage will concentrate only in the fuses, which will be exchangeable. Repair work after a strong seismic event, if needed, will be
limited only in replacing the fuses. Experimental and theoretical investigations will be performed to study the response of the fuses as well as the overall
frames to cyclic loading. Design guides will be provided.
State of progress:
Partners
(CO)
NTUA
Responsible: Prof. Ioannis VAYAS
Direct line: +(30) 210/772 1054
Direct fax: +(30) 210/772 3510
ATHENS
Department: Department of Civil Engineering
e-mail: vastahl@central.ntua.gr
GR-15780 ATHENS
(P)
POLIMI
Responsible: Prof. Carlo A. CASTIGLIONI
Direct line: +(39) 02/2399-4355
Direct fax: +(39) 02/2399-4369
POLITECNICO DI MILANO
e-mail: castigli@stru.polimi.it
Department: Dipartimento di Ingegneria Strutturale
Address: Piazza Leonardo da Vinci 32
IT-20133 MILANO
237
(P)
IST
Responsible: Prof. Luis CALADO
Direct line: +(351) 21/841 82 03
Organisation: IST
Direct fax: +(351) 21/841 82 00
e-mail: calado@civil.ist.utl.pt
Department: Department of Civil Engineering and Architecture
PT-1049 001 LISBOA
(P)
RWTH
Responsible: Dr.-Ing. Christian MÜLLER
Organisation: RWTH
Direct line: +(49) 241/802 5182
Direct fax: +(49) 241/802 2140
e-mail: mul@stb.rwth-aachen.de
DE-52074 AACHEN
(P)
SIDENOR
Responsible: Dipl. -Ing. Dimos KALTEZIOTIS
Organisation: SIDENOR
Direct line: +(30) 210/678 78 52
Direct fax: +(30) 210/678 75 74
SIDENOR SA
e-mail: dkaltez@sidenor.vionet.gr
Address: Mesogeion 2-4
GR-11527 ATHENS
Contract N°
RFSR-CT-2008-00033
Reference N°
TGS8.04/08
1.396.096
837.657
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Bridge fatigue guidance - meeting sustainable design and assessment
Acronym BRiFaG
:
The service lives of prospective and existing steel and composite bridges are invariably governed by fatigue, making thus their adequate fatigue
performance essential for their competitiveness. Unfortunately, actual design rules not only are becoming outdated for the design, both in terms of the
coverage of design details
and applicability to modern structural analysis methods, but have also never been adapted to address maintenance issues such as inspection and repair. The
aim of the proposed research is thus to provide a comprehensive guide for the fatigue design of new and maintenance of old steel bridges.
State of progress:
Partners
(CO)
CTICM
Responsible: Dr Mladen LUKIC
Organisation: CTICM
Direct line: +(33) 1/60 13 83 68
Direct fax: +(33) 1/60 13 70 84
e-mail: mlukic@cticm.com
Immeuble Apollo
(P)
CUT
Responsible: Prof Robert KLIGER
Organisation: CUT
Direct line: +(46) 31/77 220 16
Direct fax: +(46) 31/77 222 60
e-mail: robert.kliger@chalmers.se
SE-41296 GÖTEBORG
238
(P)
ITAM
Responsible: Ing. PhD Shota URUSHADZE
Organisation: ITAM
Direct line: +(420) 286/88 21 21
Direct fax: +(420) 286/88 46 34
USTAV TEORETICKE A APLIKOVANE MECH *
INST OF THEOR. AND APPLIED MECH.
Address: Prosecka 76
e-mail: urushadze@itam.cas.cz
CZ-190 00 PRAGUE 9
(P)
RAMBÖLL
Direct line: +(46) 920/200 154
Direct fax: +(46) 920/200 180
RAMBÖLL SVERIGE AB
Department: Bridge
SE-97126 LULEA
(P)
RWTH
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
DE-52074 AACHEN
(P)
UNIV SURREY
Responsible: Dr Timothy RIGHINIOTIS
Organisation: UNIV SURREY
Direct line: +(44) 1483/689 534
Direct fax: +(44) 1483/450 984
UNIVERSITY OF SURREY
e-mail: t.righiniotis@surrey.ac.uk
Address:
GB- GUILFORD GU2 5XH
Contract N°
RFSR-CT-2008-00034
Reference N°
TGS8.05/08
804.836
482.901
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Analysis of fitting noise propagation in steel lightweight constructions and design solutions for their prevention
Acronym AFINOPRO
:
Lightweight steel walls used in steel buildings have only a low specific mass per surface unit. Due to their high elasticity module, the steel beams within the
walls are excellent sound conductors. Plumbing noises are generated by pressure shocks, and eddy phenomena. So the vibrations of water columns
generate covibrations of the walls. This body sound is introduced into the wall mainly by the fastenings and other sound bridges and finally, it is perceived
via the walls and ceilings as perceptible fitting noise everywhere.
It is a very important criterion for the reserve face to steel housing.
State of progress:
Partners
(CO)
FQZ
Responsible: Dr rer nat Alvaro CASAJUS
Direct line: +(49) 3364/37 85 49
Direct fax: +(49) 3364/37 58 71
BRANDENBURG GmbH
Department: Component Laboratory
e-mail: casajus@fqz-oderbruecke.de
239
(P)
UNIV RIOJA
Responsible: Prof. Joaquín ORDIERES MERE
Direct line: +(34) 941/299 518
Direct fax: +(34) 941/299 518
e-mail: joaquin.ordieres@unirioja.es;
jbmere@gmail.com
Department: Departamento de Ingeniería Mecánica
Address: Calle Luis de Ulloa, 20
ES-26004 LOGRONO
(P)
ARCELOR CONSTRUCCI
Responsible: Ms Maria José SANCHEZ
Organisation: ARCELOR CONSTRUCCION
Direct line: +(34) 91/596 93 94
Direct fax: +(34) 91/596 93 34
ARCELORMITTAL CONSTRUCCION ESPANA SL
e-mail: maria-jose.sanchez@arcelormittal.com
Department: BCS
Address: Carretera de Guipuzkoa 3, Km 7,5
ES-31195 BERRIOPLANO
(P)
ISQ
Responsible: Mrs. Ana BICKER
Direct line: +(351) 21/422 81 97
Organisation: ISQ
Direct fax: +(351) 21/422 81 29
e-mail: ambicker@isq.pt
Department: Acoustic and Noise Control Centre
Talaide
Contract N°
RFSR-CT-2008-00035
Reference N°
TGS8.06/08
1.478.537
887.121
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Design and integrity assessment of high strength tubular structures for extreme loading conditions
Acronym HITUBES
:
The construction industry is lagging behind other industries concerning the use of high-strength steel (HSS) tubular structures. Though Eurocode 3 Part 112 extends its scope to steel grades up to S690/S700MC, many limitations exist at the material, structural and design level. The HITUBES project intends
to develop performance-based designs and assessment procedures to make full use of HSS tubes
up to S700MC for flexible structures subjected to extreme repeated loads. Necessary tools will be lab and in situ tests, modelling, integrity assessment and
maintenance procedures. The ambitious targets are to increase the performance of tubular structures, reduce weights and construction and operating costs.
State of progress:
Partners
(CO)
UNIV TRENTO
Responsible: Prof Oreste S. BURSI
Organisation: UNITN
Direct line: +(39) 0461/88 25 21
Direct fax: +(39) 0461/88 25 05
Department: Dipartimento de Ingegneria Meccanica e Strutturale
e-mail: oreste.bursi@ing.unitn.it
IT-38050 TRENTO
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/505 54 56
Direct fax: +(39) 06/505 54 52
IT-00128
240
(P)
ISQ
Direct line: +(351) 21/422 81 96
Organisation: ISQ
Direct fax: +(351) 21/422 81 26
Talaide
(P)
ITMA
Responsible: Mrs Maria CABAÑAS
Direct line: +(34) 98/598 0408
Organisation: ITMA
Direct fax: +(34) 98/526 5574
FUNDACION ITMA
e-mail: m.cabanas@itma.es
Department: R&D
Address: Edificio ITMA, Parque Tecnológico de Asturias, S/N
Lugo de Llanera
ES-33428 LLANERA
(P)
KIMAB
Responsible: Dr Rachel PETTERSSON
Direct line: +(46) 8/440 48 64
Organisation: KIMAB
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: rachel.pettersson@swerea.se
SE-11428 STOCKHOLM
(P)
Ulg
Responsible: Prof. Jean-Pierre JASPART
Organisation: ULG
Direct line: +(32) 4/366 92 47
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
e-mail: jean-pierre.jaspart@ulg.ac.be
Department: FNRS
BE-4000 LIEGE 1
(P)
UNIV THESSALY
Direct line: +(30) 2421/0740 86
Direct fax: +(30) 2421/0740 12
LABORATORY
GR-38334 VOLOS
Contract N°
RFSR-CT-2008-00036
Reference N°
TGS8.07/08
1.253.895
752.337
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Robustness of car parks against localised fire
Acronym ROBUSTFIRE
:
The increase of the market shares for steel and composite car parks in Europe is somewhat limited by the lack of information on how these structures
behave under exceptional localised fire. In the present project, a general philosophy for the design of robust structures against exceptional events will be
developed and practical design guidelines for its application to car parks under localised fire will be derived. To achieve this goal, experience will be
gained from previous or ongoing RFCS projects related to various individual aspects (temperature
distribution, joint behaviour …) and further experimental, numerical and analytical developments will be achieved.
State of progress:
Partners
241
(CO)
Ulg
Organisation: ULG
Direct line: +(32) 4/366 92 47
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
Department: FNRS
BE-4000 LIEGE 1
(P)
IMPERIAL COLLEGE
Responsible: Prof. Bassam IZZUDDIN
Direct line: +(44) 207/594 59 85
Direct fax: +(44) 207/594 59 34
Department: Computational Structural Mechanics
e-mail: b.izzuddin@imperial.ac.uk
GB- LONDON SW7 2AZ
(P)
UNIV COIMBRA
Responsible: Prof Dr Luis SIMOES DA SILVA
Organisation: UNIV COIMBRA
Direct line: +(351) 239/79 72 16
Direct fax: +(351) 239/79 72 17
FACULDADE DE CIENCIAS E TECNOLOGIA DA
UNIVERSIDADE DE COIMBRA
Department: Steel and Composite Section
Address: Rua Silvio Lima
e-mail: luisss@dec.uc.pt
Universidade de Coimbra Polo II
PT-3030-790 COIMBRA
(P)
ARCELOR PROFIL
Direct line: +(352) 5313 2175
Direct fax: +(352) 5313 2199
S.A.
(P)
CSTB
Responsible: Ph.D. Dhionis DHIMA
Organisation: CSTB
Direct line: +(33) 1/64 68 88 82
Direct fax: +(33) 1/64 68 85 23
BATIMENT
Department: Division Safety Engineering
e-mail: dhionis.dhima@cstb.fr
(P)
GREISCH
Responsible: Dr Ir Vincent DE VILLE DE GOYET
Organisation: GREISCH
Direct line: +(32) 4/364 11 35
Direct fax: +(32) 4/366 16 18
GREISCH INGENIERIE SA
e-mail: vdeville@greisch.com
Address: Allée des Noisetiers 25
BE-4031 LIEGE
242
(P)
CTICM
Direct line: +(33) 1/30 85 20 73
Organisation: CTICM
Direct fax: +(33) 1/30 85 37 29
Contract N°
RFSR-CT-2008-00037
Reference N°
TGS8.08/08
1.148.834
689.301
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: Performance-based approaches for high strength tubular columns and connections under earthquake and fire loadings
Acronym ATTEL
:
The use of high strength steel (HSS) circular hollow sections (CHS) is still limited in the construction industry despite of their excellent structural and
architectural properties and the fast development of endpreparation machines. Moreover, although EC3-1-12 extends its scope to steel grades up to
S690/S700MC, limitations exist at the material, structural and design level. The ATTEL project aims at
developing performance-based design approaches, where the capacity design – widely used in seismic engineering to avoid brittle failure and to ensure
ductile behaviour – will be extended to HSS tubular CHS structures to prevent failure and collapse under both earthquake and fire loading.
State of progress:
Partners
(CO)
Ulg
Organisation: ULG
Direct line: +(32) 4/366 92 47
Direct fax: +(32) 4/366 91 92
UNIVERSITE DE LIEGE
Department: FNRS
BE-4000 LIEGE 1
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/505 54 56
Direct fax: +(39) 06/505 54 52
IT-00128
(P)
STAHLBAU PICHLER
Responsible: Dr Daniele MAIO
Organisation: STAHLBAU PICHLER
Direct line: +(39) 0471/065 000
Direct fax: +(39) 0461/065 001
STAHLBAU PICHLER SRL
e-mail: daniele.maio@stahlbaupichler.com
Address: Via Edison 15
IT-39100 BOLZANO
(P)
UNIV THESSALY
Direct line: +(30) 2421/0740 86
Direct fax: +(30) 2421/0740 12
LABORATORY
GR-38334 VOLOS
243
(P)
UNIV TRENTO
Responsible: Dr. Eng. Fabio FERRARIO
Organisation: UNIV TRENTO
Direct line: +(39) 0461/88 25 72
Direct fax: +(39) 0461/88 25 67
UNIVERSITA DEGLI STUDI DI TRENTO -DIP DI
ING MECCANICA E STRUTTURALE
e-mail: fabio.ferrario@ing.unitn.it
Address:
IT-38050 MESIANO DI TRENTO
Contract N°
RFSR-CT-2008-00038
Reference N°
TGS8.09/08
1.668.390 1.001.033
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Energy and thermal improvements for construction in steel
Acronym ETHICS
:
ETHICS is concerned with evaluating, measuring and improving the thermal and energy performance of steel-clad and steel framed buildings. It will
address important building physics and performance issues using both laboratory test methods and by measuring the ‘as built’ performance of real
buildings. The project
will result in design guidance for commercial, industrial and residential buildings and design tools to assist in assessing and optimising whole building
performance. These tools will be calibrated against whole building measurements, obtained from the research. Opportunities for renewable energy and
other energy-saving features will be assessed.
State of progress:
Partners
(CO)
RWTH
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
DE-52074 AACHEN
(P)
SCI
Organisation: SCI
Direct line: +(44) 1344/636 525
Direct fax: +(44) 1344/636 570
(P)
CORUS UK
Responsible: Mr Ashan KHAN
Direct line: +(44) 1709/820 166
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: ahsan.khan@corusgroup.com
Rotherham
(P)
ARCELOR RES LIEGE
Responsible: Ir Giorgia CAROLI
Direct line: +(32) 4/236 89 05
Direct fax: +(32) 4/236 88 98
e-mail: giorgia.caroli@arcelormittal.com
BE-4000 LIEGE
244
(P)
VTT
Responsible: Dr Miimu AIRAKSINEN
Direct line: +(358) 20/722 111
Organisation: VTT
Direct fax: +(358) 20/722 70 27
FINLAND
e-mail: miimu.airaksinen@vtt.fi
FI-02044 VTT ESPOO
(P)
CRM
Responsible: Mr Raymond D'HAEYER
Direct line: +(32) 254/63 89
Organisation: CRM
Direct fax: +(32) 254/64 64
ASBL
e-mail: dhaeyer@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
FUNDACION LABEIN
Responsible: Mr Ekain CAGIGAL
Direct line: +(34) 94/607 33 00
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: ecagigal@labein.es
ES-48160 DERIO
(P)
CTICM
Direct line: +(33) 1/30 85 20 67
Organisation: CTICM
Direct fax: +(33) 1/30 85 21 34
Immeuble Apollo
Contract N°
RFSR-CT-2008-00039
Reference N°
TGS8.10/08
1.494.588
896.752
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Composite bridges with prefabricated decks
Acronym ELEM
:
The overall objective is to improve competitiveness of composite bridges by an elaboration of new cost effective, time effective and sustainable bridge
structures.
To allow for a prefabrication of the concrete deck, a new concept with dry joints and another one with wet-bonded joints between the elements is
investigated and developed.
The shear transmission between steel and concrete and between the deck elements will be investigated and new solutions will be elaborated and tested. A
detailed program is conceived to verify these innovations. As part of this program, their durability and utilisability will be proven to obtain competitive
composite bridges.
State of progress:
Partners
245
(CO)
RWTH
Organisation: RWTH
Direct line: +(49) 241/802 5177
Direct fax: +(49) 241/802 2140
DE-52074 AACHEN
(P)
RAMBÖLL
Direct line: +(46) 920/200 154
Direct fax: +(46) 920/200 180
RAMBÖLL SVERIGE AB
Department: Bridge
SE-97126 LULEA
(P)
LTU
Responsible: Dr Claes FAHLESON
Organisation: UNIV LULEA
Direct line: +(46) 920/49 22 32
Direct fax: +(46) 920/49 19 13
UNIVERSITY OF LULEA, DEPARTMENT OF
CIVIL AND ENVIRONMENTAL ENGINEERING
Address: Laboratoriegränd 1
e-mail: claes.fahleson@ltu.se
SE-97634 LULEA
(P)
SSF
Responsible: Mr Günter SEIDL
Organisation: SSF
Direct line: +(49) 89/36040 137
Direct fax: +(49) 89/36040 5137
SSF-INGENIEURE GmbH
e-mail: gseidl@ssf-ing.de
Address: Leopoldstrasse 208
DE-80804 MÜNCHEN
(P)
KTH
Responsible: Prof. PhD. Håkan SUNDQUIST
Organisation: KTH
Direct line: +(46) 8/790 8030
Direct fax: +(46) 8/216 949
e-mail: hakan.sundquist@byv.kth.se
SE-10044 STOCKHOLM
(P)
RUUKKI
Responsible: Mr Tomi HARJU
Organisation: RUUKKI
Direct line: +(358) 40/5490 263
Direct fax: +(358) 20/5925 656
RAUTARUUKKI OYJ
e-mail: tomi.harju@ruukki.com
Address: Suolakivenkatu 1
FI-00810 HELSINKI
(P)
WROCLAW UT
Responsible: Dr -Ing Wojciech LORENC
Direct line: +(48) 60/80267 84
Direct fax: +(48) 71/32214 65
e-mail: wojciech.lorenc@pwr.wroc.pl
PL-50344 WROCLAW
246
Technical Group TGS9 :"Factory-wide control, social and environmental issues"
Contract N°
RFSR-CT-2005-00043
Reference N°
TGS9.1/05
1.314.057
788.434
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 31/12/2008 31/12/2008
Title: Development of inclusion reference materials and simultaneous determination of metals and non-metallic inclusions by
rapid libs analysis in steel samples
Acronym REAL
:
Fast and thorough analysis of steel samples during the process of steel-making would enable better process control.
The project will provide new reference materials with well-defined inclusion population, and a technique based on laser-induced breakdown spectroscopy
to provide fast and simultaneous analysis of the steel matrix and the non-metallic inclusions.
The objectives are to:
• Develop a robust method to produce reference materials with a well defined inclusion population, and produce sets of such reference materials,
• Improve LIBS as a fast analytical technique for rapid and simultaneous analysis of trace elements in steel and characterisation of the inclusion population.
State of progress:
Partners
(CO)
CORUS UK
Responsible: Dr. Fabienne BOUE-BIGNE
Direct line: +(44) 1709/825 225
Direct fax: +(44) 1709/825 337
CENTRE
e-mail: fabienne.boue-bigne@corusgroup.com
Rotherham
(P)
ASCOMETAL
Responsible: Dr.- Ing. Eric HENAULT
Direct line: +(33) 3/87 70 73 19
Direct fax: +(33) 3/87 70 73 56
ASCOMETAL CREAS
e-mail: e.henault@ascometal.lucchini.com
(P)
CIL
Responsible: Dr. Robin DEVONSHIRE
Organisation: CIL
Direct line: +(44) 114/222 94 03
Direct fax: +(44) 114/266 43 52
CAVENDISH INSTRUMENTS LIMITED
e-mail: robin.devonshire@cavendishinstruments.com
Address: Belmayne House
99 Clarkehouse Road
GB- SHEFFIELD S10 2LN
(P)
CEA
Responsible: Dr. Laurent SALMON
Organisation: CEA
Direct line: +(33) 1/69 08 66 25
Direct fax: +(33) 1/69 08 54 51
COMMISSARIAT A L'ENERGIE ATOMIQUE
e-mail: laurent.salmon@cea.fr
Address: 31-33, rue de la Fédération
FR-75752 PARIS CEDEX
(P)
FHG
Responsible: Dr Reinhard NOLL
Organisation: FHG-ILT
Direct line: +(49) 241/8906-138
Direct fax: +(49) 241/8906-121
FRAUNHOFER-INSTITUT FÜR LASERTECHNIK
e-mail: reinhard.noll@ilt.fraunhofer.de
Department: Laser Measuring Technologies
Address: Steinbachstrasse 15
DE-52074 AACHEN
247
(P)
TKS
Responsible: Dr. Horst MITTELSTÄDT
Organisation: TKS-CS
Direct line: +(49) 203/52 44571
Direct fax: +(49) 203/52 28723
THYSSEN KRUPP STAHL AG
e-mail: horst.mittelstaedt@thyssenkrupp.com
DE-47166 DUISBURG
Contract N°
RFSR-CT-2005-00044
Reference N°
TGS9.2/05
1.442.855
865.714
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Combined ultrasound and micromagnetic measurements for non destructive assessment of textured heavy plate properties
Acronym PLATEND
:
Savings of 11M EUR/year could be achieved by European plate manufacturers, through the optimisation of the extremity length to cut out and the
reduction of associated handling operations. Such a target seems achievable by combining non-destructive evaluation (NDE) techniques.
Ultrasonic or magnetic techniques alone provide insufficient predictions but combining them showed promising prospects during recent laboratory work.
The proposal aims to investigate thoroughly the performance of such combinations on a comprehensive selection of textured plates, with laboratory and inplant investigations.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Dr. Philip MEILLAND
Direct line: +(33) 3/87 70 48 59
Direct fax: +(33) 3/87 70 41 08
e-mail: philip.meilland@arcelormittal.com
(P)
FHG
Responsible: Dr. Bernd WOLTER
Organisation: FHG-IZFP
Direct line: +(49) 681/9302-3883
Direct fax: +(49) 681/9302-5920
FRAUNHOFER-INSTITUT FÜR
ZERSTÖRUNGSFREIE PRÜFVERFAHREN
Department: Process-intergrated Methods
Address: Universität, Gebäude 37
e-mail: bernd.wolter@izfp.fraunhofer.de
DE-66123 SAARBRÜCKEN
(P)
AGDH
Responsible: Dipl. -Ing. Uwe HOFMANN
Organisation: DILLINGER
Direct line: +(49) 6831/47 3414
Direct fax: +(49) 6831/47 3351
HÜTTENWERKE
Department: Product Reception and NDT
e-mail: uwe.hofmann@dillinger.biz
DE-66748 DILLINGEN
(P)
TKS
Responsible: Dr. Wolfram WEBER
Organisation: TKS
Direct line: +(49) 203/52 45528
Direct fax: +(49) 203 52 24532
e-mail: wolfram.weber@thyssenkrupp.com
DE-47166 DUISBURG
248
Contract N°
RFSR-CT-2005-00045
Reference N°
TGS9.3/05
1.237.246
742.347
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Plant wide error messaging system based on new communication technologies
Acronym PERMESS
:
Monitoring and supervision systems in industry has substantially grown in last years thanks to advances in instrumentation and computer hardware for
processing, visualization and storage of process data. In parallel, communications and information technologies have had an exponential growth and
nowadays they bring us services that just a few years ago were far away.
Not surprisingly, recent efforts are looking to the integration of supervision and Internet in order to exploit benefits and cross-fertilization of both
disciplines.
This project will contribute to minimize time needed for detecting and diagnosing troubles in steel plants, reducing loses of time and increasing production
capacity.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl.-Ing. Heribert MENNICKEN
Direct line: +(49) 211/670 72 39
Direct fax: +(49) 211/6707 923 239
e-mail: heribert.mennicken@bfi.de
(P)
CSM
Responsible: Dr. Roberto PIANCALDINI
Organisation: CSM
Direct line: +(39) 06/505 52 88
Direct fax: +(39) 06/505 54 61
e-mail: r.piancaldini@c-s-m.it
IT-00128
(P)
ACERALIA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
UNIV OVIEDO
Responsible: Dr. Ignacio DIAZ BLANCO
Direct line: +(34) 985/182 663
Direct fax: +(34) 985/182 068
UNIVERSIDAD DE OVIEDO - INGENIERIA DE
SISTEMAS Y AUTOMATICA
Address: Campus de Viesques s/n (Edificio n° 2.2 Planta)
e-mail: idiaz@isa.uniovi.es
ES-33204 GIJON
249
Contract N°
RFSR-CT-2005-00046
Reference N°
TGS9.4/05
1.641.825
985.095
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Optimization of stocks management and production scheduling by simulation of the continuous casting, rolling and
finishing departments
Acronym SIMUSTEEL
:
The CC, Rolling and Finishing areas have a clear connection in terms of scheduling. The product-mix is continuously rescheduled and the coils movements
between mills, lines and intermediate warehouses implies a significant part of the product cost structure.
Some breaks in the supply chain could lead to expensive production stops and even coils losses. One solution of these problems is the simulation.
The main output is a software tool that implements a method to solve problems of the production flows of a modern steel plant. It will be based on an
intelligent
system consisting of a scheduler and a simulator of the materials flows.
The tool will be provided with an innovative user interface, based on web technology.
The pilot activities will be carried out at Aceralia Avilés and ThyssenKrupp Acciai Speciali Terni plant.
State of progress:
Partners
(CO)
ACERALIA
Responsible: Mrs Susana PEREGRINA MARQUEZ
Direct line: +(34) 985/12 65 49
Direct fax: +(34) 985/12 63 75
e-mail: susana.peregrina@arcelormittal.com
(P)
UNIV OVIEDO
Responsible: Prof David DE LA FUENTE GARCIA
Organisation: UNIV OVIEDO
Direct line: +(34) 98/518 2147
Direct fax: +(34) 98/518 2010
ESCUELA POLITECNICA SUPERIOR DE
INGENIEROS DE GIJON
Address: Campus de Viesques
e-mail: david@epsig.uniovi.es
ES-33203 GIJON
(P)
CSM
Responsible: Dr. Maria MURRI
Organisation: CSM
Direct line: +(39) 06/505 54 54
Direct fax: +(39) 06/505 54 52
e-mail: m.murri@c-s-m.it
IT-00128 ROMA EUR
(P)
TKAST
Responsible: Dr.ssa Rosanna CAPORUSSO
Organisation: TKAST
Direct line: +(39) 07/44 490 245
Direct fax: +(39) 07/44 490 905
e-mail: r.caporusso@acciaiterni.it
IT-05100 TERNI
(P)
VDEH-BFI
Responsible: Dr.-Ing. Bernhard DAHM
Direct line: +(49) 211/6707 983
Direct fax: +(49) 211/6707 205
e-mail: bernhard.dahm@bfi.de
Department: R&D
250
(P)
UNIV VAASA
Responsible: Prof. Petri T. HELO
Direct line: +(358) 50/5562 668
Organisation: UNIV VAASA
Fax: +(358) 6/324 820 8
UNIVERSITY OF VAASA - VAASAN YLIOPISTO
e-mail: phelo@uwasa.fi
Department: Logistics/Industrial Management
Address: Wolffintie 34
FI-65101 VAASA
Contract N°
RFSR-CT-2005-00047
Reference N°
TGS9.5/05
1.669.829 1.001.897
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 30/06/2008
Title: Factory wide e-training for steel human resource improvement and meeting process objectives
Acronym eTipo
:
The rapid technological evolution in the steel industry, driven by information technologies, raises several questions such as the adaptability of its laborer
force. In addition business process goals defined by the managers have to be considered in the working-place training programs, structuring them in
accordance
with the specific needs of the company.
To improve the availability of process knowledge and business objectives is a key factor for the steel industries during the next future, so the final goal of
this proposal is to develop a new e-learning solution for the steel production environments based on different and complementary approaches.
State of progress:
Partners
(CO)
ACERALIA
Responsible: Dr. Valentin TORRE
Direct line: +(34) 985/12 69 41
Direct fax: +(34) 985/12 63 75
e-mail: valentin.torre@arcelormittal.com
(P)
FUNDACION LABEIN
Responsible: Dr. Mikel SORLI PEÑA
Direct line: +(34) 94/607 33 05
Direct fax: +(34) 94/607 33 49
FUNDACION LABEIN
e-mail: sorli@labein.es
Department: Design Engineering
(P)
CSM
Responsible: Dr. Maria MURRI
Organisation: CSM
Direct line: +(39) 06/505 54 54
Direct fax: +(39) 06/505 54 52
e-mail: m.murri@c-s-m.it
IT-00128 ROMA EUR
(P)
TKAST
Responsible: Dr. Ing. Luca ONOFRI
Organisation: TKAST
Direct line: +(39) 0744/490 355
Direct fax: +(39) 0744/490 599
e-mail: l.onofri@acciaiterni.it
Department: Automation Process Control
IT-05100 TERNI
251
(P)
VDEH-BFI
Responsible: Dr. Michael LANGER
Direct line: +(49) 211/6707 203
Direct fax: +(49) 211/6707 923 203
e-mail: michael.langer@bfi.de
(P)
VOEST-ALPINE
Responsible: Dr. Angelika MITTELMANN
Direct line: +(43) 732/6585 9159
Direct fax: +(43) 732/ 6980 8120
e-mail: angelica.mittelmann@voestalpine.com
Department: Organisation
AT-4031 LINZ
Contract N°
RFSR-CT-2005-00048
Reference N°
TGS9.6/05
1.203.482
722.090
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2005 30/06/2008 31/12/2008
Title: Characterisation of thin films on rough steel substrates
Acronym THINFILM
:
The characterisation of thin films is not satisfactory at present by lacking methodology, knowledge and CRM’s.
The goal is the full characterization of thin films (thickness, composition, homogeneity in depth as well as laterally) that are of economical importance
(Industry, Automotive, Packaging markets) and having a thickness typically between 0.5 nm and 1000 nm..
This objective is to compare the possibilities of existing characterization techniques (used in steel research) with “more exotic” techniques not well known
for steel applications.
Complementarity, speed, availability and costs are important aspects of the analysis.
The final report will include results of a round robin, procedures for direct implementation and a data base of reference materials.
State of progress:
Partners
(CO)
OCAS
Responsible: Dr. Chris XHOFFER
Organisation: OCAS
Direct line: +(32) 9/345 1316
Direct fax: +(32) 9/345 1204
Department: Dept. of Chemistry
e-mail: chris.xhoffer@arcelormittal.com
BE-9060 ZELZATE
(P)
TKS
Responsible: Dr. Tamara APPEL
Organisation: TKS
Direct line: +(49) 231/844 58 80
Direct fax: +(49) 231/844 67 17
THYSSEN KRUPP STAHL
e-mail: appel@tks-doc.thyssenkrupp.doc
Address:
DE-44120 DORTMUND
(P)
ARCELOR RESEARCH
Responsible: Ir Denis JACQUET
Direct line: +(32) 4/236 89 26
Direct fax: +(32) 4/236 88 98
e-mail: denis.jacquet2@arcelormittal.com
BE-4000 LIEGE
252
(P)
KIMAB
Responsible: Dr Arne BENGTSON
Organisation: KIMAB
Direct line: +(46) 8/440 48 60
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: arne.bengtson@swerea.se
Department: Department of Chemistry - Materials Analysis
SE-11428 STOCKHOLM
(P)
CRC-HAS
Responsible: Prof. Erika KALMAN
Organisation: CRC-HAS
Direct line: +(36) 1/325 7548
Direct fax: +(36) 1/325 7509
MAGYAR TUDOMANYOS AKADEMIA KEMIAI
KUTATOKOZPONT
Address: Pusztaszeri ut. 59-67
e-mail: kale@chemres.hu
HU-1025 BUDAPEST
(P)
INASMET
Responsible: Dr. Felix PENALBA DIAZ
Direct line: +(34) 943/003 700
Direct fax: +(34) 943/003 800
Fundación INASMET
e-mail: fpenalba@inasmet.es
Department: Steel Division
(P)
VUB
Responsible: Prof. Herman TERRYN
Organisation: VUB
Direct line: +(32) 2/629 35 37
Direct fax: +(32) 2/629 93 200
VRIJE UNIVERSITEIT BRUSSEL
e-mail: hterryn@vub.ac.be
Department: Dept. of Metallurgy, Electrochemistry and Material
Address: Pleinlaan 2
BE-1050 BRUSSEL
(P)
MPIE
Organisation: MPIE
Direct line: +(49) 211/6792 290
Direct fax: +(49) 211/6792 218
EISENFORSCHUNG GmbH
(P)
GFAW
Responsible: Dr. Roland HERGENRÖDER
Organisation: GFAW
Direct line: +(49) 231/1392 178
Direct fax: +(49) 231/1392 120
GESELLSCHAFT ZUR FOERDERUNG DER
ANALYTISCHEN WISSENSCHAFTEN e.V.
Department: Material Analysis
Address: Bunsen-Kirchhoff-Strasse 11
e-mail: hergenroeder@ansci.de
DE-44139 DORTMUND
253
Contract N°
RFSR-CT-2006-00033
Reference N°
TGS9.01/06
1.092.865
655.719
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Control of nitrogen oxide emission at the electric arc furnace
Acronym CONOX
:
Increasing importance of reduced dust and air polluting emissions (CO2, NOx) competes with minimum total EAF energy input and maximum energy
efficiency. Therefore, it is desirable to avoid formation of NOx by controlled operation of the EAF. A consortium of three steel producers and two research
institutes in Germany and Italy aims to investigate, understand and control the emission of NOx in EAF steel making. The impact of various current EAF
technologies on the NOx formation will be investigated (1) experimentally by EAF off-gas measurements at
production of various steel grades with different EAF types and in pilot plants and (2) theoretically by modelling based on thermo-chemistry and
computational fluid dynamic (CFD) simulations.
State of progress:
Partners
(CO)
RWTH
Responsible: Prof.Dr.Ing. Herbert PFEIFER
Organisation: RWTH
Direct line: +(49) 241/80 25 935
Direct fax: +(49) 241/80 22 289
HOCHSCHULE AACHEN
Address: Kopernikusstrasse 16
e-mail: pfeifer@iob.rwth-aachen.de
DE-52056 AACHEN
(P)
DEW
Organisation: DEW
Direct line: +(49) 271/808 26 57
Direct fax: +(49) 271/808 23 23
DE-57078 SIEGEN
(P)
CSM
Organisation: CSM
Direct line: +(39) 06/505 53 15
Direct fax: +(39) 06/505 54 61
IT-00128
(P)
ORI MARTIN
Direct line: +(39) 030/399 92 65
Direct fax: +(39) 030/200 09 24
BRESCIA
IT-25128 BRESCIA
(P)
RIVA
Direct line: +(39) 045/805 8111
Direct fax: +(39) 045/591 564
IT-37133 VERONA
254
Contract N°
RFSR-CT-2006-00034
Reference N°
TGS9.02/06
1.940.348 1.164.208
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Advanced characterisation techniques for novel zinc-based alloy coatings
Acronym ADCTEC
:
The basic objective is to improve production control and R&D efficiency for novel Zn-based alloy coatings. This will be accomplished by adapting and
evaluating a range of advanced analytical and data treatment techniques for fast and complete characterisation of such coatings. Since the introduction of
these novel coating types are of major strategic importance for the European steel industry, a very broad consortium of major steel companies and several
expert laboratories has been formed. A very wide range of analytical techniques and development of an expert system based on the most advanced data
treatment methods available will be used. Also, limited on-line trials in a pilot plant will be included in the final phase of the project.
State of progress:
Partners
(CO)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 60
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
ARCELOR RESEARCH
Responsible: Dr. Didier LOISON
Direct line: +(33) 3/87 70 47 20
Direct fax: +(33) 3/87 70 47 11
e-mail: didier.loison@arcelormittal.com
(P)
TKS
Responsible: Dr Martin RAULF
Organisation: TKS
Direct line: +(49) 203/52 44944
Direct fax: +(49) 231/844 67 17
e-mail: martin.raulf@thyssenkrupp.com
DE-47161 DUISBURG
(P)
VOEST-ALPINE
Responsible: Dipl. -Ing. Johann ANGELI
Direct line: +(43) 732/65 85 93 97
Direct fax: +(43) 732/69 80 67 12
e-mail: johann.angeli@voestalpine.com
Department: Microstructure and Surface Analysis
AT-4020 LINZ
(P)
CRM
Responsible: Mrs. Eva ZEIMETZ
Organisation: CRM
Direct line: +(32) 4/254 62 34
Direct fax: +(32) 4/254 62 62
ASBL
Department: Metal Science
e-mail: zeimetz@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
255
(P)
GFAW
Responsible: Dr. Roland HERGENRÖDER
Organisation: GFAW
Direct line: +(49) 231/1392 178
Direct fax: +(49) 231/1392 120
GESELLSCHAFT ZUR FOERDERUNG DER
ANALYTISCHEN WISSENSCHAFTEN e.V.
Department: Material Analysis
Address: Bunsen-Kirchhoff-Strasse 11
e-mail: hergenroeder@ansci.de
DE-44139 DORTMUND
(P)
MPIE
Organisation: MPIE
Direct line: +(49) 211/6792-442
Direct fax: +(49) 211/6792-218
EISENFORSCHUNG GmbH
(P)
UNIV MALAGA
Responsible: Prof. Javier LASERNA
Direct line: +(34) 952/13 18 81
Organisation: UNIV MALAGA
Direct fax: +(34) 952/13 20 00
UNIVERSIDAD DE MALAGA
e-mail: laserna@uma.es
Department: Departamento de Química Analítica
Address: Plaza El Ejido, s/n
Pabellon de Gobierno, Edificio Rectorado
ES-29071 MALAGA
(P)
UNIV DORTMUND
Responsible: Prof. Dr. Bernd REUSCH
Direct line: +(49) 231/755 6222
Direct fax: +(49) 231/755 6555
UNIVERSITAET DORTMUND
e-mail: bernd.reusch@uni-dortmund.de
Department: Dpt of Computer Science, Chair 1
Address: Otto-Hahn-Straße 16
DE-44221 DORTMUND
(P)
TOP ANALYTICA
Responsible: Dr. Bengt-Johan SKRIFVARS
Telephone: +(358) 2/282 77 81
Organisation: TOP ANALYTICA
Fax: +(358) 2/282 77 85
TOP ANALYTICA OY AB
e-mail: bengt-johan.skrifvars@topanalytica.com
Address: Oldmill, Ruukinkatu 4
FI-20540 TURKU
Contract N°
RFSR-CT-2006-00035
Reference N°
TGS9.03/06
2.093.982 1.256.389
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Laser-induced breakdown spectroscopy for advanced characterisation and sorting of steel scrap
Acronym LCS
:
The objective of this project is to develop and assemble a transportable demonstrator, which uses Laser Induced Breakdown Spectroscopy (LIBS), for
automatic sorting of steel scrap. Two applications are planned for field testing of the device:
-Sorting and classification of shredded steel scrap at the exit of a shredder.
-Detailed quantitative chemical analysis of scrap moving on a conveyor belt feeding an electric arc furnace (EAF).
The development of the LIBS demonstrator system is complex. Nevertheless, the project is essential in order to reach a new technique level in the steel
industry. The work enables simultaneously, reductions in production costs, improved product quality, and significantly reduced environmental loads.
State of progress:
Partners
256
(CO)
KIMAB
Responsible: Dr. Thomas BJÖRK
Organisation: KIMAB
Direct line: +(46) 8/440 48 12
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: thomas.bjork@swerea.se
SE-11428 STOCKHOLM
(P)
FHG
Direct line: +(49) 241/8906-138
Direct fax: +(49) 241/8906-121
DE-52074 AACHEN
(P)
UNIV MALAGA
Direct line: +(34) 952/13 18 81
Direct fax: +(34) 952/13 20 00
ES-29071 MALAGA
(P)
CSM
Responsible: Dr. Ugo CHIAROTTI
Organisation: CSM
Direct line: +(39) 06/505 53 44
Direct fax: +(39) 06/505 54 52
e-mail: u.chiarotti@c-s-m.it
IT-00128
(P)
ARCELOR RESEARCH
Responsible: Mrs. Laurence GARRIGUES
Direct line: +(33) 3/87 70 43 71
Direct fax: +(33) 3/87 70 41 03
e-mail: laurence.garrigues@arcelormittal.com
(P)
ORI MARTIN
Direct line: +(39) 030/399 92 65
Direct fax: +(39) 030/200 09 24
BRESCIA
IT-25128 BRESCIA
(P)
STENA GOTTHARD
Responsible: M.Sc. Kristofer SUNDSGÅRD
Organisation: STENA GOTTHARD
Direct line: +(46) 8/449 77 11
Direct fax: +(46) 8/746 93 60
STENA GOTTHARD AB
e-mail: kristofer.sundsgard@stenagotthard.se
Address: Box 1053
SE-141 21 HUDDINGE
257
(P)
KTH
Responsible: Prof. Lars-Erik BERG
Direct line: +(46) 8/553 781 19
Organisation: KTH
Direct fax: +(46) 8/553 782 16
e-mail:
SE-10044 STOCKHOLM
Contract N°
RFSR-CT-2006-00036
Reference N°
TGS9.04/06
1.796.870 1.078.122
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Improved utilisation of results from automatic surface inspection systems
Acronym IRSIS
:
Because surface quality is of increasing importance for many steel applications, the results of automatic surface inspection systems (ASIS) become more
important. Based on the current situation that the detection and classification performance of today's ASIS is sufficient for many application purposes the
main potential lies in the proper utilisation of the ASIS results. Inside the project relevant problems of utilisation of ASIS results will be investigated, new
techniques will be developed and implemented in the field. Based on these new techniques different application examples will be realised and tested.
Results will be evaluated regarding their benefits and their transferability.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl. Math. Jens BRANDENBURGER
Direct line: +(49) 211/6707 229
Direct fax: +(49) 211/6707 923 229
e-mail: jens.brandenburger@bfi.de
Department: R&D
(P)
SZMF
Responsible: Dr rer nat Mathias STOLZENBERG
Organisation: SZMF
Direct line: +(49) 5341/21 3186
Direct fax: +(49) 5341/21 3816
GmbH
Department: Online Testing and Sensor Technology
e-mail: m.stolzenberg@sz.szmf.de
DE-38239 SALZGITTER
(P)
ILVA
Responsible: Eng Enrico ROMANO
Organisation: ILVA
Direct line: +(39) 0143/413 396
Direct fax: +(39) 0143/413 225
e-mail: met.freddo.novi@rivagroup.com
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
258
(P)
DUFERCO
Responsible: Dr. Ing. Giuseppe PRATOLONGO
Direct line: +(32) 64/272 812
Direct fax: +(32) 64/272 598
e-mail: g.pratolongo@duferco.be
Department: Metallurgy & Quality
BE-7100 LA LOUVIERE
(P)
CSM
Responsible: Dr. Roberto PIANCALDINI
Organisation: CSM
Direct line: +(39) 06/505 52 88
Direct fax: +(39) 06/505 54 61
e-mail: r.piancaldini@c-s-m.it
IT-00128
Contract N°
RFSR-CT-2006-00037
Reference N°
TGS9.05/06
1.217.169
730.301
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2006 31/12/2009 31/12/2009
Title: Line-coordinated optimisation of strip geometry and surface properties by using model-based predictive technologies
Acronym LINECOP
:
To significantly improve the efficiency of their production chains, European steel producers need a global optimisation strategy that allows the
incorporation of factory-wide systems to predict and control the evolution and influences in terms of quality through the different processing stages.
LINECOP develops line-coordinated strip-quality assessment, monitoring and optimisation systems for cold rolling and hot-dip galvanising (incl.
continuous annealing and temper rolling), based on an integrated model for the whole processing route. The new through-process optimiser predictively
adapts the downstream processes to prevent transfer/final product-quality degradation and reduces maintenance effort and re-work.
The project will provide a valuable contribution for European steel producers to increase plant availability and product quality facing the trend towards
products with tighter tolerances and more uniform strip quality over strip length and width, as well as minimise zinc-layer “safety margins”, and thus reduce
material/energy and production costs. The benefits of the project will be demonstrated at ACERALIA’s, and EKO STAHL’s strip production lines.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr Mohieddine JELALI
Direct line: +(49) 211/6707 218
Direct fax: +(49) 211/6707 923
e-mail: mohieddine.jelali@bfi.de
Department: Vice Head of Department
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 60 10
Direct fax: +(34) 98/512 63 75
(P)
ARCELOR EHS
Responsible: Dr.-Ing. Simone PIETZSCH
Organisation: EKO STAHL
Direct line: +(49) 3364/37 26 24
Direct fax: +(49) 3364/37 6526 24
EKO STAHL GmbH
e-mail: simone.pietzsch@eko.arcelor.com
Department: R&D
259
(P)
FQZ
Responsible: Dr.-Ing. Jürgen BATHELT
Direct line: +(49) 3364/372 272
Direct fax: +(49) 3364/375 872
e-mail: juergen.bathelt@arcelormittal.com
(P)
UPM
Responsible: Prof. Isabel ORTIZ
Direct line: +(34) 91/336 31 45
Organisation: UNIV POL MADRID
Direct fax: +(34) 91/336 31 46
UNIVERSIDAD POLITECNICA DE MADRIDE.T.S. INGENIEROS INDUSTRIALES
Address: c/ José Gutierrez Abascal, 2
e-mail: iortiz@ingor.etsii.upm.es
ES-28006 MADRID
Contract N°
RFSR-CT-2006-00038
Reference N°
TGS9.06/06
744.360
446.616
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2006 30/06/2009 30/06/2009
Title: Avoiding water and acid consumption in chemical scale removal by innovative combined process
Acronym FREEZE
:
Pickling processes require large amounts of acid and water. So far, a part of the pickling acid has to be discarded as waste in regular intervals. Using a new
process combination of freezing crystallisation and precipitation the spent pickling acid can be separated into pure water, metal salt crystals and a solution
containing the active acid and a rest of metal salts. The active acid and the pure water can be recycled into the pickling process or the rinsing zone,
respectively.
The extracted metal salts can be treated by pryrohydrolysis or electrolysis to recover the bonded acid and to produce metal oxides or elementary metals,
respectively.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Ms Miriam SARTOR
Telephone: +(49) 211/6707-0
Fax: +(49) 211/6707-310
e-mail: miriam.sartor@bfi.de
(P)
TKS-NR
Responsible: Dipl. -Ing. Karl-Heinz KIRCHHOFF
Organisation: TKN
Direct line: +(49) 2151/83 43 26
Direct fax: +(49) 2151/83 38 88
THYSSEN KRUPP NIROSTA GMBH
e-mail: karl-heinz.kirchhoff@thyssenkrupp.com
Department: Production Engineering
Address: Oberschlesienstraße 16
DE-47807 KREFELD
(P)
IVL
Responsible: Mr Östen EKENGREN
Organisation: IVL
Direct line: +(46) 8/598 563 43
Direct fax: +(46) 8/598 563 90
IVL SVENSKA MILJÖINSTITUTET AB
e-mail: osten.ekengren@ivl.se
Department: Environmental Technology
Address: Valhallavagen 81
SE-11427 STOCKHOLM
260
(P)
ACERINOX
Responsible: Mrs Maria José GUIO BONANY
Direct line: +(34) 956/62 93 83
Direct fax: +(34) 956/62 94 28
ACERINOX SA
e-mail: mguiobon@acxgroup.com
Department: Chemical and Corrosion Labs
Contract N°
RFSP-CT-2007-00045
Reference N°
TGS9.01/07
684.629
273.852
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Development of effective dedusting of converters by innovative concepts and constructive optimization
Acronym BOFDEDUST
:
The proposed project will provide strategies to reduce pollutant emissions from BOS processes. Specific objectives are to develop an innovative fume
suppression technique that will be tested in combination with optimised suction hoods for the secondary dedusting system of BOS shops, in order to assess
the most effective fume capture. The successful completion of this work will enable the steel industry to achieve improved environmental performance in a
cost-effective way and will fulfil the programme objectives of conservation of resources and improvement of working conditions.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl Ing Kersten MARX
Direct line: +(49) 211/670 73 84
Direct fax: +(49) 211/670 72 05
e-mail: kersten.marx@bfi.de
Department: R & D
(P)
ARCELOR BREMEN
Responsible: Mr Michael WOLLENBERG
Organisation: ARCELOR BREMEN
Direct line: +(49) 421/648-2412
Direct fax: +(49) 421/648-3206
ARCELOR BREMEN GMBH
e-mail: michael.wollenberg@arcelor-bremen.com
Address: Auf den Delben 35
DE-28237 BREMEN
Contract N°
RFSP-CT-2007-00046
Reference N°
TGS9.02/07
814.561
325.825
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Implementation of sensor based online control of pickling lines
Acronym SensorControPilot
:
A model based control concept to calculate strip speed set points in pickling lines, developed by UniOvi, and an online concentration measurement based
on ultrasound technology, developed by BFI, shall be implemented at a pickling line of TKS-RA inline to obtain a demonstration installation for sulphuric
acid pickling lines. Furthermore, both technologies shall be combined: online concentration data will be used as relevant data to calculate strip speed set
points. The control concept will help to improve strip quality and increase productivity by determining set points for the optimum strip speed with minimum
strip defects.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr. Ralf WOLTERS
Direct line: +(49) 211/6707 573
Direct fax: +(49) 211/6707 205
e-mail: ralf.wolters@bfi.de
261
(P)
RASSELSTEIN
Responsible: Dipl -Ing Werner HENNING
Organisation: RASSELSTEIN
Direct line: +(49) 2631/81 2722
Direct fax: +(49) 2631/81 152722
RASSELSTEIN GmbH
e-mail: werner.henning@rasselstein.thyssenkrupp.co
m
Department: Pickling
Address: Koblenzer Straße 141
DE-56626 ANDERNACH
(P)
UNIV OVIEDO
Responsible: Dr Hilario LOPEZ GARCIA
Organisation: UNIV OVIEDO
Direct line: +(34) 985/182 540
Direct fax: +(34) 985/182 068
e-mail: hilario@isa.uniovi.es
Department: Servicio de Investigacion
Address: Plaza de Riego, 4
Edificio Historico
ES-33003 OVIEDO
Contract N°
RFSP-CT-2007-00047
Reference N°
TGS9.03/07
684.985
273.994
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: Operational demonstration of innovative and sustainable nitrate elimination in stainless steel pickling by higher power
biological denitrification technique
Acronym NitrateBio Demo
:
The most important stainless steel pickling acid in use is the mixture of nitric and hydrofluoric acid. Nitrogenous compounds in the arising pickling process
water, have to be eliminated before the disposal of wastewater. In the forerunner project 7210-PR/358 the great advantage by the application of high-power
bio-treatment for elimination of nitrate was shown. The industrial application of the developed process by this pilot and demonstration project is completely
new and innovative. It is a logical and important step to a zero nitrate emission strategy for pickling with nitric and hydrofluoric acid which helps to save
water resources.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dr -Ing Matthias KOZARISZCZUK
Direct line: +(49) 211/6707 494
Direct fax: +(49) 211/6707 205
e-mail: matthias.kozariszczuk@bfi.de
Department: R&D
(P)
DEW
Responsible: Dipl -Ing Alex JÜRGEN
Organisation: EWS
Direct line: +(49) 2331/398 5202
Direct fax: +(49) 2331/398 5270
e-mail: juergen.alex@dew-stahl.com
DE-58042 HAGEN
(P)
ICTPOL
Responsible: Prof. Dr Ing João MOURA BORDADO
Organisation: ICTPOL
Direct line: +(351) 21/841 91 82
Direct fax: +(351) 21/841 91 98
INSTITUTO DE CIENCIA E TECNOLOGIA DE
POLIMEROS ASOCIACAO - ICTPOL
Department: Head of ICTPOL
Address: Av. Rovisco Pais, 1
e-mail: jcbordado@ist.utl.pt
PO-1049-001 LISBOA
262
Contract N°
RFSP-CT-2007-00048
Reference N°
TGS9.04/07
1.766.145
706.458
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2007 31/12/2010 31/12/2010
Title: Process based steel cleanliness investigations and rapid metallurgical screening of inclusions by modern PDA techniques
Acronym RAMSCI
:
The main goal of this project is to be able to obtain some process control in steelmaking with respect to inclusion characteristics. The pre-requisite for this
is state-of-the-art PDA optical emission spectrometry (OES) and advanced data treatment, highly developed in previous projects. The overall workplan is
to transfer this technology into actual process control; test, evaluate and improve it to an effective tool. This requires some development in process
sampling, OES data collection, data treatment algorithms, artificial intelligence techniques and reference materials (RM) for verification of analytical
results. A conservative estimate indicates cost savings of 1 MEuro/Mton; in addition increased competitiveness should mean increased profits.
State of progress:
Partners
(CO)
KIMAB
Organisation: KIMAB
Direct line: +(46) 8/440 48 60
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
SE-11428 STOCKHOLM
(P)
AGDH
Responsible: Dr Hans-Uwe SCHMITZ
Organisation: AGDH
Direct line: +(49) 6831/47 2774
Direct fax: +(49) 6831/47 3223
HÜTTENWERKE
Department: Production Control Laboratory
e-mail: hans-uwe.schmitz@dillinger.biz
(P)
VOEST-ALPINE
Responsible: Dr Andreas PISSENBERGER
Direct line: +(43) 732/6585 3908
Direct fax: +(43) 732/6980 2815
e-mail: andreas.pissenberger@voestalpine.com
AT-4031 LINZ
(P)
SSAB
Responsible: Mr Rolf DIDRIKSSON
Organisation: SSAB
Direct line: +(46) 155/25 45 72
Direct fax: +(46) 155/25 40 82
SSAB OXELÖSUND AB
e-mail: rolf.didriksson@ssabox.com
SE-61380 OXELÖSUND
(P)
OUTOKUMPU STAINLES
Responsible: Dr Gunilla RUNNSJÖ
Direct line: +(46) 226/812 53
Direct fax: +(46) 226/810 77
e-mail: gunilla.runnsjo@outokumpu.com
SE-77422 AVESTA
263
(P)
RIVA
Direct line: +(39) 045/805 8111
Direct fax: +(39) 045/591 564
IT-37133 VERONA
(P)
SIDENOR I+D
Responsible: Mr Rafael PIZARRO
Direct line: +(34) 94/487 18 59
Direct fax: +(34) 94/487 18 44
S.A.
e-mail: rafael_pizarro@sidenor.com
(P)
KTH
Responsible: Prof. Lage JONSSON
Direct line: +(46) 8/790 60 00
Organisation: KTH
Direct fax: +(46) 8/207 681
e-mail: lage@mse.kth.se
SE-10044 STOCKHOLM
(P)
FHG
Direct line: +(49) 241/8906-138
Direct fax: +(49) 241/8906-121
DE-52074 AACHEN
(P)
SSSA
Direct line: +(39) 050/883 079
Organisation: SSSA
Direct fax: +(39) 050/883 333
SANT'ANNA
Contract N°
RFSR-CT-2007-00049
Reference N°
TGS9.05/07
1.120.367
672.260
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2007 30/06/2010 30/06/2010
Title: On-line chemistry of the steel surfaces
Acronym O-Chess
:
Improve quality, robustness and up/downstream compatibility of new products (steels, metallic coating organic coatings, PVD) depends on our capacity to
control their surface chemistry (nature, quantity of lateral distribution of oxides, contaminants or cracking residue).
Or recent development of low cost spectrometers, high power source, powerful data processing such as Bayesian network, allow now to create chemical
contact free and multifunctional spectroscopic sensor (UV, vis, NIR, MIR, Raman) able to identify / quantify / map variation of steel surface chemistries.
Objective is then to screen these technologies and to propose for specific applications a pre-industrial solution validated in industrial context.
State of progress:
Partners
264
(CO)
ARCELOR RES LIEGE
Responsible: Ir Denis JACQUET
Direct line: +(32) 4/236 89 26
Direct fax: +(32) 4/236 88 98
e-mail: denis.jacquet2@arcelormittal.com
BE-4000 LIEGE
(P)
VTT
Responsible: Mr Janne SUHONEN
Direct line: +(358) 40/702 32 85
Organisation: VTT
Direct fax: +(358) 20/722 23 20
VTT OPTICAL INSTRUMENTATION
e-mail: janne.suhonen@vtt.fi
Department: Technology
Address: Microkatu 1Q
FI-70211 KUOPIO
(P)
UNIV PADERBORN
Responsible: Mr Guido GRUNDMEIER
Direct line: +(49) 5251/60 36 46
Direct fax: +(49) 5251/60 32 44
UNIVERSITÄT PADERBORN
e-mail: g.grundmeier@tc.uni-paderborn.de
Address: Warburger Strasse 100
DE-33098 PADERBORN
(P)
ARCELOR RESEARCH
Responsible: Dr Thierry JACQUOT
Direct line: +(33) 3/87 70 41 86
Direct fax: +(33) 3/87 70 41 08
e-mail: thierry.jacquot@arcelormittal.com
Contract N°
RFSP-CT-2008-00041
Reference N°
TGS9.01/08
2.083.434
833.373
Duration
Dates:
42 (Mths)
Starting
Ending
Actual
1/07/2008 31/12/2011 31/12/2011
Title: On-line bulk composition analysis of steel scrap using PGNAA
Acronym SCRAP PROBE
:
All the properties of steel are defined primarily by the chemical composition. Knowledge of the actual composition of the raw materials, mainly the scrap,
is essential for ensuring the correct mixing before melting.
A scrap-analyser based on PGNAA (Prompt Gamma Neutron Activation Analysis), which is capable of measuring the elemental composition in loads of
scrap, will be developed, for the on-line bulk analysis of bundled metal scrap in charge buckets.
MCNP-modelling of the system will be performed to determine the optimum neutron energy, shielding etc. The innovative linear neutron generator and
enhanced efficiency gamma detectors will be used. The prototype will be off-line tested in the industrial environment.
State of progress:
Partners
(CO)
CETTO
Organisation: CETTO
Direct line: +(49) 2102/94 0224
Direct fax: +(49) 2102/94 02 37
DE-40878 RATINGEN
265
(P)
ARCELOR ESPANA
Direct line: +(34) 98/512 63 94
Direct fax: +(34) 98/512 63 75
(P)
UNILIVER
Responsible: Prof Paul NOLAN
Direct line: +(44) 151/794 3377
Organisation: UNILIVER
Direct fax: +(44) 151/794 3362
UNIVERSITY OF LIVERPOOL
e-mail: pjn@ns.ph.liv.ac.uk
Department: Deparment of Physics
Address: The Foundation Building
765 Brownlow Hill
GB- LIVERPOOL L69 7ZX
(P)
CRM
Responsible: Mr GUY MONTFORT
Direct line: +(32) 4/254 62 60
Organisation: CRM
Direct fax: +(32) 4/254 64 64
ASBL
e-mail: tusset@rdmetal.ulg.ac.be
(P59)
BE-4000 LIEGE
(P)
NSD
Responsible: Mr John SVED
Direct line: +(49) 4221/924 926
Organisation: NSD
Direct fax: +(49) 4221/924 927
NSD-FUSION GmbH
e-mail: john.sved@nsd-fusion.com
Address: Falkenstrasse 3
DE-27755 DELMENHORST
Contract N°
RFSR-CT-2008-00040
Reference N°
TGS9.02/08
2.115.877 1.269.526
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Online material characterisation at strip production
Acronym OMC
:
Aim of this research proposal is the extension and the comparison of online, non-destructive material characterisation methods on production lines working
under rough conditions. Several measurement methods will be tested, based on electromagnetic techniques and on laser-ultrasonic.
Whereas the collection of process data is comparably easy, there is a lack of quality data describing the actual state of the product. These data have to be
gained by advanced methods of material characterisation online during production. Based on these values other material parameters shall be calculated
which
directly and online define the final product quality for the customer (e.g. yield strength and tensile strength). These quality parameters can then be used to
detect the relationships to the influencing process variables along the relevant production line e.g. by data mining technologies.
State of progress:
Partners
266
(CO)
SZMF
Responsible: Dr rer nat Mathias STOLZENBERG
Organisation: SZMF
Direct line: +(49) 5341/21 3186
Direct fax: +(49) 5341/21 3816
GmbH
Department: Online Testing and Sensor Technology
e-mail: m.stolzenberg@sz.szmf.de
DE-38239 SALZGITTER
(P)
ARCELOR EHS
Responsible: Mr Rene SCHMIDT
Organisation: ARCELOR EH
Direct line: +(49) 3364/37 5132
Direct fax: +(49) 3364/37 5872
ARCELOR EISENHÜTTENSTADT GmbH
e-mail: Rene.Schmidt@arcelormittal.com
Address: Werkstrasse, 1
(P)
FQZ
Responsible: Dr rer nat Alvaro CASAJUS
Direct line: +(49) 3364/37 85 49
Direct fax: +(49) 3364/37 58 71
BRANDENBURG GmbH
Department: Component Laboratory
e-mail: casajus@fqz-oderbruecke.de
(P)
TKS
Responsible: Dr Thomas KEBE
Organisation: TKS
Direct line: +(49) 203/52 43 486
Direct fax: +(49) 203/52 44 532
e-mail: thomas.kebe@thyssenkrupp.com
DE-47161 DUISBURG
(P)
KIMAB
Responsible: Mrs Eva LINDH-ULMGREN
Organisation: KIMAB
Direct line: +(46) 8/440 48 91
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: eva.lindh@swerea.se
SE-11428 STOCKHOLM
(P)
CEIT
Responsible: Mrs Ane MARTINEZ DE GUEREÑU
Organisation: CEIT
Direct line: +(34) 943/212 800
Direct fax: +(34) 943/213 076
e-mail: amartinez@ceit.es
Barrio de Ibaeta
(P)
VDEH-BFI
Responsible: Dipl -Ing Norbert HOLZKNECHT
Direct line: +(49) 211/6707-602
Direct fax: +(49) 211/6707-923 602
e-mail: norbert.holzknecht@bfi.de
Department: R&D
267
(P)
CORUS NL
Responsible: Ing Henk T. PLOEGAERT
Direct line: +(31) 251/49 64 03
Direct fax: +(31) 251/470 114
CORUS TECHNOLOGY BV
e-mail: henk.ploegaert@corusgroup.com
Department: Research laboratory
Address: Wenckebachstraat 1
NL-1951JZ VELSEN NOORD
Contract N°
RFSR-CT-2008-00042
Reference N°
TGS9.03/08
1.318.378
791.027
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: Supporting process and quality engineers by automatic diagnosis of cause-and-effect relationships between process
variables and quality deficiencies using data mining technologies
Acronym AUTODIAG
:
The through-process detection of cause-and-effect relationships by investigation of process and quality data with Data Mining techniques has been proofed
to be a powerful possibility to decrease quality deficiencies.
Nevertheless this method is not used area-wide in the companies because of its complexity, the necessary specific knowledge which only few people in the
company have and the missing adaptation of the tools to the specific problems of the steel production. These are the reasons for the consortium to develop,
implement and test robust, practicable and easy-to-use solutions which are specialised to steel quality problems and which overcomes the above
deficiencies.
State of progress:
Partners
(CO)
VDEH-BFI
Responsible: Dipl -Ing Norbert HOLZKNECHT
Direct line: +(49) 211/6707-602
Direct fax: +(49) 211/6707-923 602
e-mail: norbert.holzknecht@bfi.de
Department: R&D
(P)
ARCELOR ESPANA
Responsible: Dr. Valentin TORRE
Direct line: +(34) 985/12 69 41
Direct fax: +(34) 985/12 63 75
e-mail: valentin.torre@arcelormittal.com
(P)
ILVA
Responsible: Mr Floriano FERRO
Organisation: ILVA
Direct line: +(39) 010/607 83 26
Direct fax: +(39) 010/607 90 77
ILVA SpA
e-mail: ricerca.genova@rivagroup.com
IT-16154 GENOVA
(P)
TKS-NR
Responsible: Dr.Ing. Thomas HECKENTHALER
Organisation: KRUPP HOESCH
Direct line: +(49) 211/7107 393
Direct fax: +(49) 211/7107 311
KRUPP STAHL
e-mail: thomas.heckenthaler@thyssenkrupp.com
Address: Hildener Strasse, 80
268
(P)
SSSA
Direct line: +(39) 050/883 079
Organisation: SSSA
Direct fax: +(39) 050/883 333
SANT'ANNA
Contract N°
RFSR-CT-2008-00043
Reference N°
TGS9.04/08
896.744
538.046
Duration
Dates:
36 (Mths)
Starting
Ending
Actual
1/07/2008 30/06/2011 30/06/2011
Title: In-situ analysis of hot dip galvanizing baths
Acronym ZINCANA
:
The objective of this project is to a method for zinc bath composition measurements based on LIBS (Laser Induced Breakdown Spectrometry) system
analyzing inside the bath, adapted for high content and traces elements analysis and optimized for precipitates characterization. Using the instrumental
measurements, the modelling of zinc bath composition will be performed and
comparison to industrial measurements realized. The model could further be used in order to get the influence of process parameters on drosses
precipitation.
The advantage of LIBS compared to other experimental techniques, such as samples or aluminum probes, is that the system can perform on-line
simultaneous measurements of different dissolved elements (Zn, Fe, Al…).
The project is divided into three working areas:
- Laboratory trials of LIBS experiments in order to validate the parameters for zinc bath analysis
- Industrial trials of LIBS measurements both for element analyses (high and low level) and drosses characterization
- Modelling of zinc bath composition and comparison to industrials measurements.
State of progress:
Partners
(CO)
ARCELOR RESEARCH
Responsible: Mrs Marie SIMONNET
Direct line: +(33) 3/87 70 48 28
Direct fax: +(33) 3/87 70 41 04
e-mail: marie.simonnet@arcelormittal.com
Department: Process improvement by modelling
(P)
KIMAB
Responsible: Dr. Thomas BJORK
Organisation: KIMAB
Direct line: +(46) 8/440 48 00
Direct fax: +(46) 8/440 45 35
SWEREA KIMAB AB
e-mail: thomas.bjork@swerea.se
SE-11428 STOCKHOLM
(P)
CRSA
Responsible: Dr. Marie-Laurence GIORGI
Organisation: CRSA
Direct line: +(33) 1/41 13 11 72
Direct fax: +(33) 1/41 13 11 63
CENTRALE RECHERCHE SA
e-mail: marie-laurence.giorgi@ecp.fr
Address: 8 rue Jean-Goujon
FR-75008 PARIS
269
(P)
UNIV MALAGA
Direct line: +(34) 952/13 18 81
Direct fax: +(34) 952/13 20 00
ES-29071 MALAGA
(P)
TECNAR
Responsible: Ing. M. Sc.A. Alexandre NADEAU
Organisation: TECNAR
Direct line: +(1) 450/461 1221-226
Direct fax: +(1) 450/461 08 08
TECNAR AUTOMATION LTEE
e-mail: anadeau@tecnar.com
Department: LIBS Division
Address: Rue Hocquart, 1321
CA-J3V 6B5 SAINT-BRUNO
270

Table of contents - CORDIS

Transcription

Similar documents

trasportatori e curve conveyors and curves - V

MTF 20 - Cometo

June - Society for Invertebrate Pathology

Gioco Responsabile Venue Codice di Condotta gioco d`azzardo 1

pdf file

Scarica - Rubinetteria Paffoni

1 - Upshur County

Business Account Application Form Borang

museo mercedes-benz stoccarda - germania mercedes

ProWein MyCatalog 2012

Catalogue - Australian Cat Federation