castors wheels - Ross Handling

Transcription

CASTORS
&
WHEELS
A Quick Guide to Selecting Castors & Wheels
This guide is to help you identify the correct castors or wheels for your requirements.
CASTORS
In order to select the appropriate castors you must consider the following; load capacity, castor fittings and environmental conditions.
Load Capacity
For the castor to be effective, you must consider the total load of the unit you wish to manoeuvre. You can use the following equation
to determine your load capacity per castor.
Load Capacity of
Castor
Unit Load + Weight of Equipment
=
3
1
TON
For example a trolley requiring 4 castors, you take the total weight of the trolley, plus the maximum weight the trolley is to carry, and
divide by 3. This will give you the load capacity requirement for each castor, allowing for a margin of safety. The margin of safety is
built in to allow for different working conditions and uneven floor surfaces. Once you have your maximum load requirement, the next
decision is to choose a castor fitting.
Castor Fittings - Bolt Hole Fitting
Castor Fittings - Top Plate Fitting
A single central bolt hole fixing, with a swivelling castor housing
and a bolt hole diameter of either M12 or M10. Can be fitted with
a tubular expander to fit either round or square tubing. Swivel
with brake is available.
A rectangular or square plate with 4 fixing bolts.
The 4 bolts provide a strong fixing and distribute the weight
evenly. Can be either swivelling castor, fixed or swivel with
a brake.
WHEELS
BEARINGS
In general the larger the wheel the more weight it can carry
and the easier it is to move. Bearings in wheels will help to
reduce friction and ease movement. Wheels can be divided
into two categories.
There are 4 types of bearings which can help reduce rolling
resistance. The choice, like the wheels, depends upon the
application, working environment, load capacities and the
amount of movement required. Plain Bearings - for light loads
moving over short distances Roller Bearings- reduces resistance
for heavy loads on short distances Ball Journal – precision
bearings for heavy loads with constant movement Tapered Roller
Bearing – for the largest loads.
Hard Tread Wheels
Easiest to push, least resistance, but can be noisy and
damage certain floors. Available in Cast Iron and Steel, Nylon,
Polypropylene and Phenolic ( High Temp ).
SPECIAL APPLICATIONS
Soft Tread Wheels
Soft tread means more resistance, which may result in being
harder to push. They are however, quieter and kinder to the
floors. Rubber, Non Marking Rubber, Polyurethane, High
Temperature Rubber and Pneumatic wheels.
2
Ross Handling Ltd
We also offer a range of special application castors and wheels,
such as heat resistant, stainless steel, aluminium castors,
scene shifters and low level castors, jacking and gate castors.
For special application wheels we can offer antistatic, high
temperature, wheelchair wheels, trolley wheels, v- grooved
and flanged steel wheels.
For more information please call: 0116 276 4987
Tel: 0116 2764 987
or
Email: sales@rosshandling.co.uk
Index
Twin Wheel Castors
Display & PoS Castors
Furniture Castors
Designer Castors
Bolt Hole Castors
Institutional Castors
Light Industrial Castors
Medium Industrial Castors
Medium/Heavy Duty Castors
Anti-Static, High Temp & Pneumatic Tyred Castors
Stainless Steel Castors
Light Duty Bolt Hole Castors
Light Duty Flat Top Plate Castors
Medium Duty Bolt Hole Castors
Medium Duty Flat Top Plate Castors
Extra Heavy Duty Castors
Extra Heavy Duty Castors
Gate & Low Level Castors
Fabricated Castors
Jacking Castors
Jacking & Footmaster Castors
Flexello Castors & Wheels
Revvo Castors
Assorted Wheels
Pneumatic & Trolley Wheels
Plastic & Nylon Wheels
Rubber & High Temp Wheels
Nylon & Polyurethane Wheels
Anti-Static Wheels & Pallet Rollers
Cast Iron, Grooved & Flanged Rail Wheels
Special Application Wheels, Axle’s & Axle Collars
Special Application Castors
Terms & Conditions
4
5
6
7-8
9
10
11
12
13
14
15-19
15
16
17
18
19
20
21-22
23
24-27
28
29-30
31-32
33-38
33
34
35
36
37
38
39
40
41
World Class Supplier of Castors & Wheels
TELEPHONE ORDER LINE FAX ORDER LINE 0116 276 4987
0116 274 1751
ROSS HANDLING LIMITED
71 Cannock Street Leicester LE4 9HR
E-mail: sales@rosshandling.co.uk
www.rosshandling.co.uk
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
sales@rosshandling.co.uk
3
Twin Wheel Castors
TW Series
An inexpensive range of black plastic 40mm and 50mm hooded twin wheeled castors. Available with M8 & M10 threaded stems and plate fixings.
Suitable for use on light domestic equipment, video stands, office furniture, point of sale and display equipment. All sizes can be supplied with or
without footbrakes. The 75mm heavy duty version is unhooded and can be supplied with M10 stems (2 lengths) or with flat top plates.
Threaded Stem Fittings
Wheel
Diam.
Threaded
Stems
Castor Height
Load
Capacity
Unbraked
Reference
Braked Reference
40mm
M8 x 15mm
52mm
40kg
TW4001 M8 x 15
TW4001 M8 x 15/B
40mm
M10 x 15mm
52mm
40kg
TW4001 M10 x 15
TW4001 M10 x 15/B
50mm
M8 x 15mm
64mm
50kg
TW5001 M8 x 15
TW5001 M8 x 15/B
50mm
M10 x 15mm
64mm
50kg
TW5001 M10 x 15
TW5001 M10 x 15/B
75mm
M8 x 15mm
81mm
75Kg
TW75M8x15
TW75M8x15/B
75mm
M8 x 25mm
81mm
75Kg
TW75M8x25
TW75M8x25/B
75mm
M10 x 15mm
81mm
75kg
TW7501 M10 x 15
TW7501 M10 x 15/B
75mm
M10 x 25mm
81mm
75kg
TW7501 M10 x 25
TW7501 M10 x 25/B
The twin wheeled castors can be supplied complete (as shown) or with loose threaded stems for ease
of fitting. Wood Inserts, Tee-Nuts, Weld-on-Nuts also available as optional extras.
Plate Fitting
Wheel
Diam.
Plate Size
Bolt
Diam.
Castor
Height
Load
Capacity
Unbraked
Reference
Braked Reference
40mm
38mm x 38mm
27mm x 27mm
5mm
54mm
40kg
TW4004
TW4004/B
50mm
38mm x 38mm
27mm x 27mm
5mm
66mm
50kg
TW5004
TW5004/B
75mm
38mm x 38mm
27mm x 27mm
5mm
88mm
75kg
TW7504
TW7504/B
The twin wheeled castors can be supplied complete (as shown) or with loose top plates for ease of fitting.
TW Series (Circlip)
Wheel
Diam.
Fixings
Castor
Height
Load
Capacity
Nylon Wheel
Reference
Rubber Wheel
Reference
50mm
M10 x 30mm
54mm
50kg
TW500 M10 CIRCLIP
-
50mm
M11 x 22mm
57mm
50kg
TW500 M11 CIRCLIP
-
50mm
M10 x 30mm
54mm
50kg
-
TWR500 M10 CIRCLIP
50mm
M11 x 22mm
57mm
50kg
-
TWR500 M11 CIRCLIP
Ideal for office chairs. Available in black nylon or soft grey rubber wheels.
4
Ross Handling Ltd
Tel: 0116 2764 987
or
Display & PoS Castors
FS Series
A range of light/medium pressed steel swivel castors for use on point
of sale, display racks, etc., available with 8mm bolt hole fitting. Can be
supplied with black plastic or grey rubber tyred wheels. 10mm bolt hole
available to special order. Braked or unbraked.
Bolt Hole Fitting
Wheel
Diam.
Wheels
Overall
Height
Load
Capacity
Unbraked
Reference
Braked
Reference
50mm
Black plastic
70mm
55kg
FS-N2013
FS-N2013/BR
50mm
*Grey rubber
70mm
50kg
FS-P2013
FS-P2013/BR
*The rubber tyred wheels are fitted with threadguards.
FS Series
Some range as above but fitted with flat top plates. Avaliable with 50mm
black plastic or grey rubber wheels. Braked or unbraked.
Plate Fitting
Wheel
Diam.
Wheels
Overall
Height
Load
Capc.
Plate size /
Hole centres
Unbraked
Ref.
Braked Ref
50mm
Black
plastic
72mm
55kg
50mm x 50mm
36mm x 36mm
FS-N2014
FS-N2014/BR
50mm
*Grey
rubber
72mm
50kg
50mm x 50mm
36mm x 36mm
FS-P2014
FS-P2014/BR
*The rubber tyred wheels are fitted with threadguards. Bolt size: 6mm.
360 Series
Size: 50mm & 75mm
Twin wheeled castors suitable for a wide range of light duty applications.
Available with M10 single bolt hole fixings. Braked or unbraked can be
fitted with Black Polypropylene or Grey Rubber tyred wheels.
Bolt Hole Fitting
360 Series
Wheel
Diam.
Wheels
Overall
Height
Load
Capc.
Unbraked
Reference
Braked
Reference
50mm
Black plastic
72mm
60kg
50-360-P-BH10
50-360-P-BH10/SWB
50mm
Grey rubber
72mm
60kg
50-360-R-BH10
50-360-R-BH10/SWB
75mm
Black plastic
98mm
90kg
75-360-P-BH10
75-360-P-BH10/SWB
75mm
Grey rubber
100mm
90kg
75-360-R-BH10
75-360-R-BH10/SWB
Size: 50mm & 75mm
Twin wheeled castors suitable for a wide range of light duty applications.
Available with flat top plate fixings. Braked or unbraked can be fitted with
Black Polypropylene or Grey Rubber tyred wheels.
Plate size: 60mm x 60mm, centres (48/38mm x 48/38mm)
Plate Fitting
Wheel
Diam.
Wheels
Overall
Height
Load
Cap.
Unbraked
Reference
Braked
Reference
50mm
Black plastic
72mm
60kg
50-360-P-FP
50-360-P-FP/SWB
50mm
Grey rubber
72mm
60kg
50-360-R-FP
50-360-R-FP/SWB
75mm
Black plastic
98mm
90kg
75-360-P-FP
75-360-P-FP/SWB
75mm
Grey rubber
100mm
90kg
75-360-R-FP
75-360-R-FP/SWB
Threadgaurds only to special order, not fitted as standard.
Ross Handling Ltd
Tel: 0116 2764 987
or
5
Furniture Castors
FF Series
Light duty swivel castors suitable for use on point of sale and display equipment. Can be supplied
with metal sockets for wood fitting, and round or square plastic sockets for metal tubing.
Type
Wheel
Diam.
Wheels
Fittings
Overall
Height
Capacity
Reference
FF
41mm
Black Plastic
Wood Socket
52mm
50kg
FFK-41
FF
41mm
Black Plastic
Round Plastic Sockets for 5/8” 3/4” 1” Tubing
Square Plastic Sockets for 3/4/” 1” Tubing
Wheel
Diam.
Push Fitting
to suit O/D
Overall
Height
Load
Capacity
Reference
100mm
19mm
130mm
80Kg
OP-100-19
100mm
22mm
130mm
80Kg
OP-100-22
100mm
25mm
130mm
80Kg
OP-100-25
OP Series
The OP series is a brown light duty
synthetic castor with a dark grey
non marking wheel and brown
polypropylene centre. Supplied
with a metal push fit plug to fit
varying diameter plastic sockets.
SHEPHERD Series
Shepherd Metal ball castors with and without rubber tyres. Available in 50mm and 63mm diameters. The 50mm is suitable for furniture, medium duty
office equipment, small trolleys etc. The 63mm is a heavy duty version suitable for display racking, merchandisers, materials handling equipment etc.
Large footstool castors & castors on chairs are also available from stock.
Range of Fittings available
Castor Reference
Wheel
Diam.
Threaded
Stems
Peg &
Socket
Top Plates
Load
Capc.
Peg &
Socket
Top Plates
Threaded
Stems
50mm
M-8
9.5
38 x 38
(25.4 x 25.4)
50kg
No. 46
No. 41
No. 44
63mm
M-10
-
38 x 38
(25.4 x 25.4)
75kg
-
No. 51
No. 54
50mm diameters available in Beige, Dark Brown or Bright Nickel. The 63mm is available in Beige only.
Please specify your colour preference when ordering.
OVERALL HEIGHTS:
50mm Castors
63mm Castors
BALL TRANSFERS
63mm to 82mm
75mm to 90mm
No. 1000
3/4” & 1” diameter
No. 1007
1” diameter
No. 1009
3/4” & 1” diameter
Ball transfer units consist of a large ball
seated in a quantity of small bearings in
a hemispherical cup. The design allows
the ball to rotate freely in any direction.
Available in ¾” and 1” diameters.
Flange fitting where height is restricted. Used for
conveyor and transfer tables etc. Self cleaning
hole standard. Method of attachment - self tapping
screws, pop rivets, nuts and bolts.
Used for conveyor, transfer tables etc.
Ball upwards only. Self cleaning hole
standard.
LOAD CAPACITY
UPWARDS:
3/4” = 23kg 1” = 55kg
DOWNWARDS: 3/4” = 10kg 1” = 25kg
6
Ross Handling Ltd
Tel: 0116 2764 987
or
Bolt fixing M8 thread.
Stock lengths 25mm.
Diagrams are shown with 1” balls
Designer Castors
DS Series
Contemporary range of twin wheeled castors. Silver body with dark grey rubber tyres. Ideal for furniture and point of
sale. Available with M.10 stems or Flat Top Plates, with or without footbrakes.
Wheel Diam.
Fixings
Overall Height
65mm
65mm
65mm
65mm
65mm
75mm
75mm
75mm
75mm
75mm
M8 x 15mm
M8 x 25mm
M10 x 15mm
M10 x 25mm
38 x 38mm (27 x 27mm)
M8 x 15mm
M8 x 25mm
M10 x 15mm
M10 x 25mm
38 x 38mm (27 x 27mm)
74mm
74mm
74mm
74mm
79mm
81mm
81mm
81mm
81mm
88mm
Load
Capacity
60Kg
60Kg
60kg
60kg
60kg
75Kg
75Kg
75kg
75kg
75kg
Unbraked
Reference
DS65M8x15
DS65M8x25
DS65M10x15
DS65M10x25
DS654
DS75M8x15
DS75M8x25
DS7501M10x15
DS7501M10x25
DS7504
Braked Reference
DS65M8x15/B
DS65M8x25/B
DS65M10x15/B
DS65M10x25/B
DS654/B
DS75M8x15/B
DS75M8x25/B
DS7501M10x15/B
DS7501M10x25/B
DS7504/B
BS Series
Elegant modern design castors with metallic silver finish and light grey rubber wheels. Available with M.10 stems or Flat
Top Plates, with or without footbrakes.
Wheel Diam.
Fixings
Overall Height
75mm
75mm
75mm
M10 x 15mm
M10 x 25mm
65 x 65mm (47 x 47mm)
92mm
92mm
100mm
Load
Capacity
100kg
100kg
100kg
Unbraked
Reference
BS75M10x15
BS75M10x25
BS754
Braked Reference
BS75M10x15/B
BS75M10x25/B
BS754/B
ER Series
Ultra modern twin wheel castors with a chrome housing and twin grey non marking polyurethane wheels. Ideal for
furniture and point of sale applications. Available with a Top plate or M10 threaded stem fitting.
Unbraked
Reference
ER75M10X15
Braked Reference
98mm
Load
Capacity
50Kg
103mm
50Kg
ER754
ER754/BR
Wheel Diam.
Fixings
Overall Height
75mm
M10 x 15mm
75mm
47 x 47mm
37/30 x 37/30mm
ER75M10X15/BR
LS Series
Stylish and elegant white body with a grey polyurethane castor tyre. Ideal for display and furniture applications
where aesthetics is key. Available in a 100mm diameter Polyurethane tyred wheel with either a Flat Top Plate fitting or
Threaded stem fitting. Braked and Un-braked availabled.
Wheel Diam.
Fixings
Overall Height
Load Capacity
100mm
100mm
100mm
95 X 70mm (75 x 50mm)
M10 x 15mm
M10 x 25mm
124mm
122mm
122mm
100kg
100kg
100kg
Ross Handling Ltd
Unbraked
Reference
LS1004
LS100M10x15
LS100M10x25
Tel: 0116 2764 987
Braked Reference
LS1004/BR
LS100M10x15/BR
LS100M10x25/BR
or
7
Designer Castors
ES Series
New slimline design castors. Ideal for display and furniture applications. Light grey body with dark grey rubber tyres.
Available with M.10 stems or Flat Top Plates, with or without footbrakes.
Wheel Diam.
Fixings
Overall Height
80mm
80mm
80mm
100mm
100mm
100mm
M10 x 15mm
M10 x 25mm
65 x 65mm (47 x 47mm)
M10 x 15mm
M10 x 25mm
65 x 65mm (47 x 47mm)
110mm
110mm
114mm
126mm
126mm
131mm
Load
Capacity
60kg
60kg
60kg
70kg
70kg
70kg
Unbraked
Reference
ES80M10x15
ES80M10x25
ES804
ES100M10x15
ES100M10x25
ES1004
Braked Reference
ES80M10x15/B
ES80M10x25/B
ES804/B
ES100M10x15/B
ES100M10x25/B
ES1004/B
GS Series
Synthetic castor, ideal for use as a wheelchair castor or on medical equipment . Light grey body with dark grey nonmarking tyres. Available in a 100,125 and 150mm diameter wheel. With either a 12mm bolt hole or plate fitting. With or
without footbrakes
Fixings
Overall Height
Load
Capacity
Unbraked
Reference
Braked Reference
100mm
M12 B/H
135mm
80Kg
GS100M12
GS100M12/BR
100mm
90 X 70mm (70x50mm)
138mm
80Kg
GS1004
GS1004/BR
125mm
M12 B/H
161mm
100Kg
GS125M12
GS125M12/BR
125mm
90 X 70mm (70x50mm)
164mm
100Kg
GS1254
GS1254/BR
150mm
M12 B/H
189mm
100Kg
GS150M12
GS150M12/BR
150mm
90 X 70mm (70x50mm)
192mm
100Kg
GS1504
GS1504/BR
Wheel Diam.
8
Ross Handling
Tel: 01162764987
or
Display
Bolt
& Hole
PointCastors
of Sale
310 Series
Size: 50mm, 75mm & 100mm
Light duty pressed steel swivel castors with 10mm bolt holes. Can be
fitted with grey non-marking Rubber Tyred or Black Polypropylene wheels.
Suitable for a wide range of light duty applications.
Castor Reference and Load Capacity
Wheel
Diam.
Tread Width
Plated Finish
Castor Height
Swivel
Radius
Swivel Race
Diam.
Bolt
Diameter
Grey Rubber
Black
Polypropylene
2”
50mm
22mm
Zinc
71mm
47mm
41mm
*10mm
50-310-R
60kg
50-310-P
65kg
3”
75mm
**23mm
Zinc
101mm
61mm
41mm
*10mm
75-310-R
70kg
75-310-P
75kg
4”
100mm
**26mm
Zinc
122mm
83mm
41mm
*10mm
100-310-R
80kg
100-310-P
85kg
An alternative 100mm and 125mm castor is available in a chrome plated finish. Details on request.
* Bolt hole fitting requires a 20mm washer and a 10mm bolt.
** The 3” and 4” Polypropylene wheels have 22mm tread widths.
3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER
OPTIONAL EXTRAS
Round Expanding Tubular
Adaptor
Square Expanding Tubular
Adaptor
Combined Swivel and
Wheel Brake (all sizes)
Spring Loaded Castors
(For Mobile Steps)
Expanding adaptors available
for round tubing in the following
sizes:
Expanding adaptors available
for square tubing in the
following sizes:
Overall height of castors
increased by 3mm.
increased by 3mm.
Simultaneously brakes both the
swivel head and wheel. Release
is affected by the trip pedal. To
order add suffix ‘SWB’ to castor
reference.
To order add suffix detailed in
table to swivel castor reference.
To order add suffix detailed in
table to swivel castor reference.
Spring fitting for use with a
75mm castors, with either
rubber tyred or polypropylene
wheels.
The spring fitting is inserted into
a 1” outside diameter sleeve
and compresses with a load of
16kg. Maximum load capacity
per castor is 70kg.
Swivel Radius
The swivel radius is increased
when brakes are fitted.
50mm wheels: increased by
33mm
30mm
23mm
25.4mm
85mm
35mm
Expander
Range
Ref.
18 - 19.5mm
R-18
Expander
Range
Ref.
19.5 - 21.7mm
R-20
20 - 22mm
S-20
21.7 - 24.5mm
R-22
22 - 25mm
S-22
24.5 - 27mm
R-25
25 - 28mm
S-25
27mm - 29.5mm
R-27
29 - 32mm
S-29
29.5 - 32mm
R-30
36 - 38mm
S-36
Ross Handling Ltd
223mm
75mm
21mm
tread
To order, add the following suffix
SA1 to the castor reference
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
9
1
Display & Point
Institutional
Castors
of Sale
314 Series
Light duty pressed steel swivel castors with flat top plates. Available in grey
non-marking Rubber Tyred or Black Polypropylene wheels. Suitable for a
wide range of light duty applications.
Wheel
Diam.
Tread Width
Plated Finish
Castor Height
Swivel
Radius
Plate Size
Bolt Diam.
Grey Rubber
Black
Polypropylene
2”
50mm
22mm
Zinc
72mm
46mm
60mm x 60mm
48/38 x 48/38
6mm
50-314-R
60kg
50-314-P
65kg
3”
75mm
*23mm
Zinc
101mm
68mm
60mm x 60mm
48/38 x 48/38
6mm
75-314-R
70kg
75-314-P
75kg
4”
100mm
*26mm
Zinc
121mm
83mm
60mm x 60mm
48/38 x 48/38
6mm
100-314-R
80kg
100-314-P
85kg
* The 3” and 4” Polypropylene wheels have 22mm tread widths
3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER
OPTIONAL EXTRA
Combined Swivel and Wheel Brake (all sizes)
Foot operated wheel brake simultaneously brakes both the swivel head and wheel.
Release is affected by the trip pedal. To order add suffix ‘ SWB ’ to the swivel castor reference.
Swivel Radius
The swivel radius is increased when brakes are fitted.
50mm wheels: increased by 34mm
10
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Light
Display
Industrial
& PointCastors
of Sale
2260 Series
Size: 80mm, 100mm & 125mm.
Double ball race swivel castors suitable for a wide range of light duty applications. Available with white
nylon, grey non marking or black rubber tyred wheels.
Wheel
Diam.
Tread
Width
Type
Castor
Height
Plate size
Bolt hole
spacing
Bolt
Diam
Swivel
Rad.
White Nylon
Grey Rubber
Black Rubber
3" +
80mm
*30mm
Swivel
107mm
99 x 80mm
80 x 60mm
8mm
70mm
80-2260-NV
100kg
80-2260-GV
50kg
80-2260-PV
50kg
4”
100mm
*30mm
Swivel
127mm
99 x 80mm
80 x 60mm
8mm
80mm
100-2260-NV
120kg
100-2260-GV
70kg
100-2260-PV
70kg
5”
125mm
*39mm
Swivel
155mm
99 x 80mm
80 x 60mm
8mm
100mm
125-2260-NV
150kg
125-2260-GV
100kg
125-2260-PV
100kg
*The tread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows:
80mm = 23mm, 100mm = 23mm, 125mm = 26mm
2268 Series
Size: 80mm, 100mm & 125mm.
Fixed castors suitable for a wide range of light duty applications.
Available with white nylon, grey non marking or black rubber tyred wheels.
Wheel
Diam.
Tread
Width
Castor
Type
Castor
Height
Plate size
Bolt hole
spacing
Bolt
Diam
White Nylon
Grey Rubber
Black Rubber
3" +
80mm
*30mm
Fixed
107mm
100 x 84mm
80 x 60mm
8mm
80-2268-NV
100kg
80-2268-GV
50kg
80-2268-PV
50kg
4”
100mm
*30mm
Fixed
127mm
100 x 84mm
80 x 60mm
8mm
100-2268-NV
120kg
100-2268-GV
70kg
100-2268-PV
70kg
5”
125mm
*39mm
Fixed
155mm
100 x 84mm
80 x 60mm
8mm
125-2268-NV
150kg
125-2268-GV
100kg
125-2268-PV
100kg
*The thread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows:
80mm = 23mm, 100mm = 23mm, 125mm = 26mm
OPTIONAL EXTRA
Foot operated wheel brake simultaneously brakes both the
swivel head and wheel. Release is affected by the trip pedal.
To order add suffix ‘SWB’ to the swivel castor reference.
Swivel Radius
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
11
1
Display &
Medium
Industrial
Point of Sale
Castors
4000 Series
Size: 80mm, 100mm, 125mm & 160mm
Double Ball Bearing Swivel Castors.
The latest addition to the pressed steel range. The castors are suitable for use on
trolleys, roll pallets, display racks and general purpose equipment. Available with
rubber, polyurethane or nylon wheels.
Wheel
Diam.
3” +
80mm
4”
100mm
5”
125mm
6” +
160mm
Tread
Width
RN=36mm
PV=22mm
GV=22mm
PN=38mm
NY=30mm
RN=29mm
PV=22mm
GV=22mm
PN=30mm
NY=30mm
AS=22mm
RN=34mm
PV=27mm
GV=27mm
PN=30mm
NY=38mm
AS=27mm
RN=40mm
PV=25mm
GV=25mm
PN=40mm
NY=40mm
AS=24mm
Castor
Height
Sw'l Race
Diam.
Bolt
Diam.
Swivel
Radius
Blue
Rubber
Black
Rubber
Grey
Rubber
Polyure thane
White Nylon
Anti Static
108mm
65mm
*12mm
70mm
80-4000-RNB
100kg
80-4000-PV
70kg
80-4000-GV
70kg
80-4000-PNB
100kg
80-4000-NY
100kg
-
128mm
65mm
*12mm
80mm
100-4000-RNB
120kg
100-4000-PV
80kg
100-4000-GV
80kg
100-4000-PNB
120kg
100-4000-NY
120kg
100-4000-ASR
70kg
157mm
73mm
*12mm
100mm
125-4000-RNB
150kg
125-4000-PV
100kg
125-4000-GV
100kg
125-4000-PNB
150kg
125-4000-NY
150kg
125-4000-ASR
100kg
195mm
-
*12mm
135mm
160-4000-RNB
200kg
160-4000-PVR
135kg
**
160-4000-GVR
135kg
160-4000-PNB
200kg
160-4000-NYB
200kg
160-4000-ASR
135kg
*We also offer loose fitted reducing bushes to give a 10mm bolt diameter.
**160mm Black Rubber Wheel has a red centre.
OPTIONAL EXTRAS
12
Round Expanding Tubular Adaptor
Square Expanding Tubular Adaptor
Expanding adaptors
available for round
tubing in the following
sizes:
increased by 3mm.
To order add suffix
detailed in table to
castor references.
Expanding adaptors
available for square
tubing in the following
sizes:
Overall height of
castors increased by
3mm.
To order add suffix
detailed in table to
castor references.
Expander
Range
Ref.
18 - 19.5mm
R-18
Expander
Range
Ref.
19.5 - 21.7mm
R-20
20 - 22mm
S-20
21.7 - 24.5mm
R-22
22 - 25mm
S-22
24.5 - 27mm
R-25
25 - 28mm
S-25
27 - 29.5mm
R-27
29 - 32mm
S-29
29.5 - 32mm
R-30
36 - 38mm
S-36
Ross Handling Ltd
Combined Swivel and Wheel Brake
(all sizes)
Simultaneously brakes both the swivel head
and wheel. Release is affected by the trip
pedal. To order add suffix ‘SWB’ to castor
reference.
Swivel Radius
The swivel radius is increased when brakes
are fitted.
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
Medium/Heavy
Display & Point
Duty Castors
of Sale
3360 Series (Swivel)
3368 Series (Fixed)
Size: 80mm, 100mm, 125mm, 160mm & 200mm
Size: 80mm, 100mm, 125mm, 160mm & 200mm
Double Ball Bearing Swivel & Fixed Castors.
The castors are suitable for use on trolleys, roll pallets, display racks and general
purpose equipment where good manoeuvrability and easy rolling is required together
with high strength. Available with rubber, polyurethane or nylon wheels.
8mm bolt diameter for 3”, 4” and 5” castors. The 6” and 8” castors have 10mm
bolt diameters
Wheel
Diam.
Tread
width
(mm)
3” +
80mm
RN=36
GV=27
PV=27
PN=38
NY=34
4”
100mm
RN=29
GV=23
PV=23
PN=30
NY=34
5”
125mm
RN=34
GV=23
PV=23
PN=30
NY=38
6” +
160mm
RN=40
GV=25
PV=25
PN=40
NY=40
8”
200mm
RN=40
GV=33
PV=33
PN=50
NY=46
Castor
Type
Castor
Height
Plate
size
Bolt
Hole
spacin'
Swiv.
Rad.
Blue
Rubber
Grey
Rubber
Black Rubber
Polyure thane
PB White
Nylon
RB White
Nylon
Swivel
108mm
105 x
85mm
80 x
60mm
75mm
80-3360-RNB
90kg
80-3360-GVR
70kg
80-3360-PVR
70kg
*80-3360-PNB
150kg
80-3360-NY
100kg
-
Fixed
108mm
99 x
85mm
80 x
60mm
-
80-3368-RNB
90kg
80-3368-GVR
70kg
80-3368-PVR
70kg
*80-3368-PNB
150kg
80-3368-NY
100kg
-
Swivel
128mm
105 x
85mm
80 x
60mm
85mm
100-3360-RNB
160kg
100-3360-GVR
80kg
100-3360-PVR
80kg
100-3360-PNB
200kg
Fixed
128mm
101 x
85mm
80 x
60mm
-
100-3368-RNB
160kg
100-3368-GVR
80kg
100-3368-PVR
80kg
100-3368-PNB
200kg
Swivel
155mm
105 x
85mm
80 x
60mm
105mm
125-3360-RNB
180kg
125-3360-GVR
100kg
**125-3360-PVR
100kg
125-3360-PNB
250kg
-
125-3360-NYB
300kg
Fixed
155mm
101 x
85mm
80 x
60mm
-
125-3368-RNB
180kg
125-3368-GVR
100kg
**125-3368-PVR
100kg
125-3368-PNB
250kg
-
125-3368-NYB
300kg
Swivel
200mm
137 x
105mm
105 x
80mm
140mm
160-3360-RNB
300kg
160-3360-GVR
150kg
**160-3360-PVR
150kg
160-3360-PNB
300kg
160-3360-NY
350kg
160-3360-NYB
350kg
Fixed
200mm
137 x
115mm
105x
80mm
-
160-3368-RNB
300kg
160-3368-GVR
150kg
**160-3368-PVR
150kg
160-3368-PNB
300kg
160-3368-NY
350kg
160-3368-NYB
350kg
Swivel
240mm
137 x
105mm
105x
80mm
165mm
200-3360-RNB
400kg
200-3360-GVR
200kg
**200-3360-PVR
200kg
200-3360-PNB
400kg
200-3360-NY
400kg
200-3360-NYB
400kg
Fixed
240mm
137 x
115mm
105 x
80mm
-
200-3368-RNB
400kg
200-3368-GVR
200kg
**200-3368-PVR
200kg
200-3368-PNB
400kg
200-3368-NY
400kg
200-3368-NYB
400kg
***
100-3360-POR
150kg
***
100-3368-POR
150kg
* A 3”+ 80mm Grey/Grey polyurethane wheel is available as an alternative to the standard Red/White, load capacity 150kg.
160mm & 200mm Black Rubber Wheels have red centres. *** Fitted with white roller bearing Polypropylene Wheels.
100-3360-NYB
200kg
100-3368-NYB
200kg
** The 125mm,
OPTIONAL EXTRAS
Directional Swivel Locks
Foot operated wheel brake simultaneously brakes both the swivel head
and wheel. Release is affected by the trip pedal. To order add suffix
‘SWB’ to the swivel castor reference.
Loose fitted (unassembled) directional swivel locks available on 6” and
8” castors.
Swivel Radius
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
13
1
Anti-Static, High Temperature &
Display & Point of Sale
Pneumatic Tyred Castors
Anti-Static & High Temperature Castors
A range of anti-static (electrically conductive) and high temperature castors.
The anti-static wheels have pressed steel centres with black rubber tyres.
The High Temperature wheels are phenolic resin or high temperature rubber
and have a range from -40°C to +280°C. Both ranges are available with and
without brakes.
Wheel
Diam.
Tread
Width
3” +
80mm
TH=35mm
4”
100mm
AS=22mm
TH=35mm
HT=34mm
5”
125mm
AS=27mm
TH=35mm
6” +
160mm
AS=24mm
TH=40mm
8”
200mm
AS=30mm
TH=50mm
Castor
Type
Castor
Height
Plate Size
Bolt Hole
Spacing
Bolt
Diam.
Swiv. Rad.
Anti Static
Rubber
Swivel
108mm
105 x 85mm
80 x 60mm
8mm
75mm
-
Fixed
108mm
99 x 85mm
80 x 60mm
8mm
-
-
Swivel
128mm
105 x 85mm
80 x 60mm
8mm
85mm
Fixed
128mm
101 x 85mm
80 x 60mm
8mm
-
Swivel
155mm
105 x 85mm
80 x 60mm
8mm
105mm
Fixed
155mm
101 x 85mm
80 x 60mm
8mm
-
Swivel
200mm
137 x 105mm
105 x 80mm
10mm
140mm
Fixed
200mm
137 x 115mm
105 x 80mm
10mm
-
Swivel
240mm
137 x 105mm
105 x 80mm
10mm
165mm
Fixed
240mm
137 x 115mm
105 x 80mm
10mm
-
High Temp.
Phenolic
80-3360-TH
100kg
80-3368-TH
100kg
100-3360-TH
125kg
100-3368-TH
125kg
125-3360-TH
150kg
125-3368-TH
150kg
160-3360-TH
250kg
160-3368-TH
250kg
200-3360-TH
300kg
200-3368-TH
300kg
100-3360-ASR
70kg
100-3368-ASR
70kg
125-3360-ASR
100kg
125-3368-ASR
100kg
160-3360-ASR
135kg
160-3368-ASR
135kg
200-3360-ASR
205kg
200-3368-ASR
205kg
High Temp.
Rubber
100-3360-HT
60kg
100-3368-HT
60kg
-
OPTIONAL EXTRA
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release
is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference.
Swivel Radius
Castor Reference and
Load Capacity
Pneumatic Tyred Castors
Swivel and Fixed Pneumatic tyred castors. Availabe in 8” and 10” diameters.
Ideal for cushioning sensitive loads. The 10” wheel is used on cricket wicket covers as the wide tread prevents
damage to the playing surface. Black tyres on grey metal centres.
Wheel
Diam.
Tread
Width
8” 200mm
Castor
Type
Castor
Height
Plate Size
Bolt Hole
Spacing
Bolt
Diam.
Swiv.
Rad.
Swivel
240mm
137 x 105mm
105 x 80mm
10mm
165mm
Fixed
240mm
140 x 115mm
105 x 80mm
10mm
-
Swivel
302mm
200 x 160mm
105 x 115mm
12mm
215mm
-
Fixed
302mm
200 x 160mm
105 x 115mm
12mm
-
-
48mm
8” 200mm
10” 260mm
8" Ref.
200-3360-PWR
75kg
200-3368-PWR
75kg
85mm
10” 260mm
14
Ross Handling Ltd
10" Ref.
260-3360-PWR
200kg
260-3368-PWR
200kg
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Light
Duty
Bolt
Hole
SSL Series Stainless Steel Swivel Castors
Size: 60mm, 80mm, 100mm, 125mm & 150mm
Our light duty Stainless Steel bolt hole swivel castors range offers an
excellent solution to clean room and medical applications where weight
is not an issue. Available in a range of sizes from 60mm to 150mm,
with thermoplastic or electro-conductive rubber wheels. Stainless steel
castors can be supplied braked or un-braked.
Wheel
Diam.
Tread
width
Castor
Type
Castor
Height
Bolt Hole
Diam.
Swivel Radius
Thermoplastic
Rubber
Electro-conductive Rubber
(Ball Journal)
60mm
22mm
Swivel
89mm
10mm
57mm
SSL-60-TPR/BH10
40Kg
SSL-60-ASR/BH10
40Kg
3" +
80mm
22mm
Swivel
109mm
10mm
70mm
SSL-80-TPR/BH10
50Kg
SSL-80-ASR/BH10
50Kg
4"
100mm
30mm
Swivel
134mm
12mm
92mm
SSL-100-TPR/BH12
80Kg
SSL-100-ASR/BH12
80Kg
5"
125mm
30mm
Swivel
162mm
12mm
106mm
SSL-125-TPR/BH12
100Kg
SSL-125-ASR/BH12
100Kg
6"
150mm
30mm
Swivel
188mm
12mm
123mm
SSL-150-TPR/BH12
100Kg
SSL-150-ASR/BH12
100Kg
OPTIONAL EXTRA
‘SWB’ to the swivel reference.
Swivel Radius
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
15
1
Light Duty Flat Top Plate
SSL Series Stainless Steel Swivel Castors
Size: 60mm, 80mm, 100mm, 125mm & 150mm
SFL Series Stainless Steel Fixed Castors
Size: 60mm, 80mm, 100mm, 125mm & 150mm
Our light duty swivel & fixed Stainless Steel top plate castors range offers
an excellent solution to clean room and medical applications where
weight capacity is not an issue. Available in a range of sizes from 60mm
to 150mm, with thermoplastic or electro-conductive rubber wheels.
Stainless steel castors can be supplied braked or un-braked.
Wheel
Diam.
Tread
width
(mm)
Castor
Type
Castor
Height
Plate
size
(mm)
Bolt Hole
spacing
(mm)
Bolt
Diam.
Swiv.
Rad.
Thermoplastic
Rubber
Electro-conductive Rubber
(Ball Journal)
22mm
Swivel
89mm
65 x 50
mm
50 x 36 mm
6mm
57mm
SSL-60-TPR
40Kg
SSL-60-ASR
40Kg
22mm
Fixed
89mm
65 x 54
mm
50 x 36 mm
6mm
-
SFL-60-TPR
40Kg
SFL-60-ASR
40Kg
22mm
Swivel
109mm
65 x 50
mm
50 x 36 mm
6mm
70mm
SSL-80-TPR
50Kg
SSL-80-ASR
50Kg
22mm
Fixed
109mm
65 x 54
mm
50 x 36 mm
6mm
-
SFL-80-TPR
50Kg
SFL-80-ASR
50Kg
30mm
Swivel
134mm
90 x 70
mm
70 x 50 mm
8mm
92mm
SSL-100-TPR
80Kg
SSL-100-ASR
80Kg
30mm
Fixed
134mm
90 x 70
mm
70 x 50 mm
8mm
-
SFL-100-TPR
80Kg
SFL-100-ASR
80Kg
30mm
Swivel
162mm
90 x 70
mm
70 x 50 mm
8mm
106mm
SSL-125-TPR
100Kg
SSL-125-ASR
100Kg
30mm
Fixed
162mm
90 x 70
mm
70 x 50 mm
8mm
-
SFL-125-TPR
100Kg
SFL-125-ASR
100Kg
30mm
Swivel
188mm
90 x 70
mm
70 x 50 mm
8mm
123mm
SSL-150-TPR
100Kg
SSL-150-ASR
100Kg
30mm
Fixed
188mm
90 x 70
mm
70 x 50 mm
8mm
-
SFL-150-TPR
100Kg
SFL-150-ASR
100Kg
60mm
3” +
80mm
4”
100mm
5”
125mm
6”
150mm
OPTIONAL EXTRA
Swivel Radius
16
Ross Handling Ltd
Tel: 0116 2764 987
or
Medium
Duty
Bolt
Hole
SS Series Stainless Steel Swivel Castors
Our meduim duty Stainless steel bolt hole castors range are ideal for
use in clean rooms and a range of enviroments. Available in sizes
80mm, 100mm and 125mm with a range of wheels including rubber,
polyurethane, nylon and both high temperature termotex and high
temperature ruber. Ideal for food processing, institutional and hospital
equipment industries. Can be supplied braken or un-braked.
Wheel
Diam.
3” +
80mm
4”
100mm
5”
125mm
Tread
width
(mm)
GVR = 27
PNB = 38
NY = 34
TH = 35
GVR = 23
PNB = 30
NYB = 34
TH = 35
HT =34
GVR = 23
PNB = 30
NYB = 38
TH = 35
Castor
Type
Castor
Height
Swivel
Race
Diam
Bolt
Diam.
Swiv.
Rad.
Grey
Rubber
Polyurethane
White
Nylon
High Temp
Termotex
High Temp
Rubber
Swivel
108mm
76mm
12mm
75mm
SS-80GVR/BH12
70Kg
SS-80PNB/BH12*
70Kg
SS-80NY/BH12
70Kg
SS-80TH/BH12
70Kg
-
Swivel
128mm
76mm
12mm
85mm
SS-100GVR/BH12
80Kg
SS-100PNB/BH12
80Kg
SS-100NYB/BH12
80Kg
SS-100TH/BH12
80Kg
SS-100HT/BH12
80Kg
Swivel
155mm
70mm
12mm
105mm
SS-125GVR/BH12
100Kg
SS-125PNB/BH12
100Kg
SS-125NYB/BH12
100Kg
SS-125TH/BH12
100Kg
-
* The 80mm Polyurethane wheel is grey on grey
OPTIONAL EXTRA
and wheel. Release is affectedby the trip pedal. To order add ‘suffix
Swivel Radius
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
17
1
Medium Duty Flat Top Plate
SS Series Stainless Steel Swivel Castors
Size: 80mm, 100mm, 125mm, 160mm & 200mm
SF Series Stainless Steel Fixed Castors
Size: 80mm, 100mm, 125mm, 160mm & 200mm
STAINLESS STEEL SWIVEL & FIXED CASTORS have been introduced to
cater for the increased demand in the food processing, institutional and
hospital equipment industries.
Wheel
Diam.
Tread
width
(mm)
Castor
Type
Castor
Height
Plate
size
(mm)
Bolt Hole
spacing
(mm)
Bolt
Diam.
Swiv.
Rad.
Grey
Rubber
Polyurethane
White
Nylon
High Temp
Termotex
High Temp
Rubber
3” +
80mm
GV=27
PN=38
NY=34
TH=35
Swivel
108mm
105 x 85
80 x 60
8mm
75mm
SS-80-GVR
70kg
*SS-80-PNB
100kg
SS-80-NY
100kg
SS-80-TH
100kg
-
Fixed
108mm
99 x 85
80 x 60
8mm
-
SF-80-GVR
70kg
*SF-80-PNB
100kg
SF-80-NY
100kg
SF-80-TH
100kg
-
4”
100mm
GV=23
PN=30
NY=34
TH=35
HT=34
Swivel
128mm
105 x 85
80 x 60
8mm
85mm
SS-100-GVR
80kg
SS-100-PNB
150kg
SS-100-NYB
150kg
SS-100-TH
125kg
SS-100-HT
60kg
Fixed
128mm
101 x 85
80 x 60
8mm
-
SF-100-GVR
80kg
SF-100-PNB
150kg
SF-100-NYB
150kg
SF-100-TH
125kg
SF-100-HT
60kg
5”
125mm
GV=23
PN=30
NY=38
TH=35
Swivel
155mm
105 x 85
80 x 60
8mm
105mm
SS-125-GVR
100kg
SS-125-PNB
300kg
SS-125-NYB
300kg
SS-125-TH
150kg
-
Fixed
155mm
101 x 85
80 x 60
8mm
-
SF-125-GVR
100kg
SF-125-PNB
300kg
SF-125-NYB
300kg
SF-125-TH
150kg
-
6” +
160mm
GV=25
PN=40
NY=40
TH=40
Swivel
196mm
140 x 110
105 x 80/75
10mm
140mm
SS-160-GVR
150kg
SS-160-PNB
350kg
SS-160-NY
350kg
SS-160-TH
250kg
-
Fixed
196mm
140 x 110
105 x 80/75
10mm
-
SF-160-GVR
150kg
SF-160-PNB
350kg
SF-160-NY
350kg
SF-160-TH
250kg
-
8”
200mm
GV=33
PN=50
NY=46
TH=40
Swivel
236mm
140 x 110
105 x 80/75
10mm
165mm
SS-200-GVR
200kg
SS-200-PNB
400kg
SS-200-NY
400kg
SS-200-TH
300kg
-
Fixed
236mm
140 x 110
105 x 80/75
10mm
-
SF-200-GVR
200kg
SF-200-PNB
400kg
SF-200-NY
400kg
SF-200-TH
300kg
-
*The 80mm Polyurethane wheel is grey on grey.
OPTIONAL EXTRA
Swivel Radius
18
Ross Handling Ltd
Tel: 0116 2764 987
or
Extra Heavy Duty
HSS Series Stainless Steel Swivel Castors
Size: 125mm, 160mm & 200mm
HSF Series Stainless Steel Fixed Castors
Size: 125mm, 160mm & 200mm
Castors of applications where load capacity is key, the Extra Heavy Duty
Stainless Steel Castor is an ideal solution. Available in sizes 125mm,
160mm and 200mm. Fitted with heavy duty nylon wheels in swivel or fixed
brackets. Stainless steel castors can be supplied braked or un-braked.
Castor Reference and
Load Capacity
Wheel Diam
5”
125mm
6” +
160mm
8”
200mm
Tread
Width
Castor
Type
Castor
Height
Plate size
Bolt Hole
Spacing
Bolt Diam.
Swivel Rad.
White Nylon
40mm
Swivel
164mm
140 x 110 mm
105 x 80/75 mm
10mm
118mm
HSS-125-NY
700Kg
40mm
Fixed
164mm
140 x 110 mm
105 x 80/75 mm
10mm
40mm
Swivel
200mm
140 x 110 mm
105 x 80/75 mm
10mm
40mm
Fixed
200mm
140 x 110 mm
105 x 80/75 mm
10mm
50mm
Swivel
240mm
140 x 110 mm
105 x 80/75 mm
10mm
50mm
Fixed
240mm
140 x 110 mm
105 x 80/75 mm
10mm
HSF-125-NY
700Kg
135mm
HSS-160-NY
700Kg
HSF-160-NY
700Kg
155mm
HSS-200-NY
800Kg
HSF-200-NY
800Kg
OPTIONAL EXTRA
Swivel Radius
Ross Handling Ltd
Tel: 0116 2764 987
or
19
Display
Extra
Heavy
& Point
Duty
ofCastors
Sale
Size: 160mm & 200mm
5050 Series (Fixed)
Size: 160mm & 200mm
Very heavy duty swivel and fixed castors.
Suitable for a wide range of industrial applications.
Available with rubber, polyurethane, nylon and cast iron wheels.
Wheel
Diam.
Tread
width
(mm)
Castor
Type
Castor
Height
Plate
size
(mm)
Bolt Hole
spacin'
(mm)
Bolt
Diam.
Swiv.
Rad.
Rubber
Polyurethane
on Aluminium
Polyurethane
White
Nylon
Cast Iron
5”
125mm
HRT=50
SUB=50
NYB=40
PAL=50
Swivel
164mm
140 x 110
105 x 80/75
10mm
118mm
125-5000- HRT
300kg
125-5000-PAL
500kg
125-5000-SUB
550kg
125-5000-NYB
700kg
-
Fixed
164mm
140 x 110
105 x 80/75
10mm
-
125-5050- HRT
300kg
125-5050-PAL
500kg
125-5050-SUB
550kg
125-5050-NYB
700kg
-
6” +
160mm
HRT=50
SUB=50
PAL=50
NYB=40
CIB=45
Swivel
*200mm
140 x 110
105 x 80/75
10mm
135mm
160-5000- HRT
400kg
160-5000-PAL
700kg
160-5000-SUB
700kg
160-5000-NYB
700kg
150-5000-CIB
700kg
Fixed
*200mm
140 x 110
105 x 80/75
10mm
-
160-5050- HRT
400kg
160-5050-PAL
700kg
160-5050-SUB
700kg
160-5050-NYB
700kg
150-5050-CIB
700kg
8”
200mm
HRT=50
SUB=50
PAL=50
NYB=50
CIB=45
Swivel
240mm
140x 110
105 x 80/75
10mm
155mm
200-5000- HRT
500kg
200-5000-PAL
800kg
200-5000-SUB
800kg
200-5000-NYB
800kg
200-5000-CIB
800kg
Fixed
240mm
140 x 110
105 x 80/75
10mm
-
200-5050- HRT
500kg
200-5050-PAL
800kg
200-5050-SUB
800kg
200-5050-NYB
800kg
200-5050-CIB
800kg
*When the 6” cast iron wheels are used, the castor height is reduced by 10mm.
OPTIONAL EXTRAS
TLCH Truck Locks
Foot operated wheel brake
simultaneously brakes both the
swivel head
and wheel. Release is affected by
the trip pedal. To order add suffix
‘SWB’ to the swivel castor
reference.
Swivel Radius
The swivel radius is increased when
brakes are fitted.
The 6” cast iron wheels are not
available with brakes.
20
Ross Handling Ltd
Top plate fitting
The TLCH truck lock and floor lock
is designed to bolt to the underside
of the truck and should be mounted
with its top face 200mm above the
ground surface.
Plate size
Bolt Hole
Spacing
Bolt
Diam.
Overall height
- free position
Overall height
- pad extended
152 x 114mm
127 x 63.5mm
12mm
163.5mm
208mm
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Gate
Display
& Low&Level
PointCastors
of Sale
Gate Castors
Heavy duty 4” fixed castor is designed to help support a gate where either end of a gate needs support and/or there is some variation in level of
ground (3” maximum compression of spring with 70kg force). Consideration therefore needs to be given as to the location of this castor on the gate.
Fixing via 2 x 10mm holes. Fitted with rubber tyred, roller bearing wheels.
Type A
Heavy Duty
Elevation
Light Duty
The light duty swivel version
is 280mm overall height with a
100mm fixing plate and 60mm
centres. Fitted with 4” rubber
tyred wheels having a load
capacity of 60kg.
8
8
85 159
85
375
40
41
100
Scene Shifter - Industrial Skates
Range of scene shifters and industrial skates for low level movement. Available
from 35mm to 125mm wheel diameters. Ideal for moving scenery. Load capacity
300Kg to 460Kg.
Wheel Diam.
Tread Width
Load Capacity
35mm
28mm
50mm
Plate/Bolt Hole Dimensions
Castor Height
Wheel Type
Castor Ref
55mm x 55mm
85mm
Polyurethane
MINISS
150mm x 110mm
105mm x 80mm
98mm
Polyurethane
MINISS-50mm
460Kg
150mm x 110mm
105mm x 80mm
162mm
Polyurethane
BS4-100-PT04/X
460Kg
150mm x 110mm
105mm x 80mm
184mm
Polyurethane
BS4-125-PT04/X
Plate
Bolt Centres
300Kg
85mm x 85mm
14mm
360Kg
4" /100mm
40mm
5"/125mm
40mm
Appliance Rollers
Easily move refrigerators, and other heavy domestic appliances.
Not recommended for cushioned vinyl floors and hardwood floors.
420mm x 80mm extendable to 640mm.
Overall height: 38mm
Load capacity: 200kg (Per pair)
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
21
1
Gate
& Low
Level
Display
& Point
of Castors
Sale
50mm Twin Low Level Castors
Twin wheel castors are only 64mm overall height with twin 50mm wheels. On a
smooth hard floor these castors are able to carry up to 270kg per castor. Suitable
for use on concert grand piano-fortes, fire proof filing cabinets, safes and other
such heavy equipment.
Available with twin steel, polyurethane or nylon wheels.
Wheel
Diam.
Overall
Height
Swivel
Radius
Tread
Width
Load
Capacity
Wheel Type
Castor Ref
2”
50mm
64mm
50mm
14mm
160kg
270kg
160kg
Twin Polyurethane
Twiin Steel
Twin Nylon
2SL 050 PTOL
2SL 050 STOL
2SL 050 NYOL
Pallet Feet
Pallet feet are designed for fitting to Pallet legs of box or angle type.
Supplied ready for welding.
Dimensions (mm)
22
Pallet
SWG
REF
A
B
C
Leg Type
Size (mm)
127 x 127
54
56
Box/Angle
50
13
KPF1A
165 x 165
54
76
Box/Angle
60/70
10
KPF2
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Display
Fabricated
& PointCastors
of Sale
Size: 100mm, 125mm, 160mm, 200mm & 250mm
6050 Series (Fixed)
Size: 100mm, 125mm, 160mm, 200mm & 250mm
Extremely heavy duty fabricated swivel & fixed castors.
Precision bearings in swivel head and wheel on 160mm, 200mm and 250mm
diameters. Available with cast iron or polyurethane wheels.
Wheel
Diam.
Tread
width
(mm)
4”
100mm
CI=45
SUB=50
5”
125mm
CI=45
SUB=50
6”
160mm
8”
200mm
10”
250mm
Castor
Type
Castor
Height
Plate size
Bolt Hole
spacin'
(mm)
Bolt Diam.
Swiv.
Rad.
Cast Iron
Polyurethane
Swivel
145mm
135 x 110mm
105 x 80/75mm
10mm
92mm
TSH-100-CI1H
320kg
100-6000-SUB
450kg
Fixed
145mm
135 x 110mm
105 x 80/75mm
10mm
-
TFH-100-CI1H
320kg
100-6050-SUB
450kg
Swivel
170mm
135 x 110mm
105 x 80/75mm
10mm
110mm
TSH-125-CI1H
630kg
125-6000-SUB
550kg
Fixed
170mm
135 x 110mm
105 x 80/75mm
10mm
-
TFH-125-CI1H
630kg
125-6050-SUB
550kg
Swivel
205mm
135 x 110mm
105 x 80/75mm
11mm
137mm
-
160-6000-SUB
860kg
Fixed
205mm
135 x 110mm
105 x 80/75mm
11mm
-
-
160-6050-SUB
860kg
Swivel
245mm
135 x 110mm
105 x 80/75mm
11mm
166mm
-
200-6000-SUB
1200kg
Fixed
245mm
135 x 110mm
105 x 80/75mm
11mm
-
-
200-6050-SUB
1200kg
Swivel
305mm
200 x 160mm
160 x 120mm
14mm
199mm
-
250-6000-SUB
1700kg
Fixed
305mm
200 x 160mm
160 x 120mm
14mm
-
-
250-6050-SUB
1700kg
60mm
60mm
80mm
OPTIONAL EXTRA
Available on 125mm, 160mm, 200mm and 250mm sizes.
Foot operated brake simultaneously brakes both wheel and swivel
head. To order add suffix ‘SWB’ to castor reference.
Swivel Radius
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
23
1
Jacking Castors
Medium Duty Jacking Castors with 76mm lift
Available with 80mm, 100mm, 125mm and 160mm nylon, rubber, cast iron and polyurethane wheels.
Important Information
Jacking castors are rated on a different
principle to other castors, they lift the
total load off the floor and therefore
each castor is liable to carry half
the total load. When adjusting units
fitted with multiple jacking castors it
is essential that they are all adjusted
simultaneously so that an even
load distribution is maintained. The
minimum castor capacity required is
obtained by taking...
Unladen unit weight + maximum load
2
D
Swivel
Radius
Wheel
Material
Load
Cap.
Part Number
84mm
Rubber
70kg
JA4-080-GVR
121mm
Rubber
70kg
JA4-080-GVR/SWB
Polyamide
150kg
JA4-080-NY
Polyamide
150kg
JA4-080-NY/SWB
84mm
Polyurethane
150kg
JA4-080-PNB
121mm
Polyurethane
150kg
JA4-080-PNB/SWB
L
L1
C
C1
D1
Bolt Hole
Size
H
A
B
A+B
E
84mm
80mm
121mm
KEY
102mm
51mm
11mm
10mm
108mm 131mm
187mm
318mm
394mm
91mm
Rubber
80kg
JA4-100-GVR
Rubber
80kg
JA4-100-GVR/SWB
91mm
Polyamide
150kg
JA4-100-NYB
Polyamide
150kg
JA4-100-NYB/SWB
91mm
Polyurethane
150kg
JA4-100-PNB
121mm
Polyurethane
150kg
JA4-100-PNB/SWB
91mm
Cast Iron
150kg
JA4-100-CIB
130mm
Castor Dimensions
24
75mm
121mm
121mm
100mm
130mm
75mm
102mm
51mm
11mm
10mm
128mm 151mm
187mm
338mm
414mm
D
Wheel Diameter
H
Total Castor Height (mm)
L
Plate Dimension length (mm)
A
Total Height to Plate lower bolt hole (mm)
L1
Plate Dimension width (mm)
B
Jacking Unit Total Height from plate lower bolt hole (mm)
C
Plate hole centers length (mm)
A+B
C1
Plate hole centers width (mm)
E
D1
Plate hole diameter (mm)
Ross Handling Ltd
Tel: 0116 2764 987
Min total Jacking Unit Un-Extended Height (mm)
A+B+76mm Jacking Unit Extension Height
or
Jacking Castors
Medium Duty Jacking Castors with 76mm lift
125mm
160mm
150mm
103mm
Rubber
100kg
JA4-125-GVR
121mm
Rubber
100kg
JA4-125-GVR/SWB
103mm
Polyamide
150kg
JA4-125-NYB
Polyamide
150kg
JA4-125-NYB/SWB
103mm
Polyurethane
150kg
JA4-125-PNB
121mm
Polyurethane
150kg
JA4-125-PNB/SWB
103mm
Cast Iron
150kg
JA4-125-CIB
135mm
167mm
135mm
167mm
135mm
167mm
125mm
Rubber
Rubber
Polyamide
Polyamide
Polyurethane
Polyurethane
Cast Iron
150kg
150kg
200kg
200kg
200kg
200kg
200kg
JA4-160-GVR
JA4-160-GVR/SWB
JA4-160-NYB
JA4-160-NYB/SWB
JA4-160-PNB
JA4-160-PNB/SWB
JA4-160-CIB
121mm
130mm
130mm
75mm
75mm
102mm
102mm
51mm
51mm
11mm
11mm
10mm
10mm
155mm 178mm
195mm 218mm
187mm
187mm
185mm 208mm
365mm
441mm
405mm
481mm
395mm
471mm
Optional extras: Wheel and swivel lock. The foot pedal clamps a spring across the wheel and effectively locks them both. To order add suffix ‘SWB’ to
reference (swivel radius increased by 40mm).
Heavy Duty Jacking Castors with 200mm lift
Height adjustable castors available with 5”, 6” & 8” nylon, rubber tyred, polyurethane and cast iron wheels.
2
Ross Handling Ltd
Tel: 0116 2764 987
or
25
Jacking Castors
Heavy Duty Jacking Castors with 200mm lift
D
125mm
160mm
150mm
Swivel
Radius
L
L1
C
C1
D1
Bolt Hole
Size
H
A
B
A+B
E
Load
Cap.
Part Number
118mm
Rubber
300kg
RH6-125-RTB
148mm
Rubber
300kg
RH6-125-RTB/SWB
118mm
Polyamide
600kg
RH6-125-NYB
Polyamide
600kg
RH6-125-NYB/
SWB
118mm
Polyurethane
550kg
RH6-125-SUB
148mm
Polyurethane
550kg
RH6-125-SUB/
SWB
118mm
Cast Iron
550kg
RH6-125-CIB
135mm
150mm
135mm
Rubber
Rubber
Polyamide
300kg
300kg
600kg
Polyamide
600kg
135mm
Polyurethane
600kg
150mm
Polyurethane
600kg
Cast Iron
600kg
RH6-160-RTB
RH6-160-RTB/SWB
RH6-160-NYB
RH6-160-NYB/
SWB
RH6-160-SUB
RH6-160-SUB/
SWB
RH6-160-CIB
148mm
150mm
150mm
150mm
100mm
100mm
110mm
110mm
60mm
60mm
11mm
11mm
10mm
10mm
125mm
164mm 235mm
200mm 261mm
339mm
339mm
190mm 261mm
574mm
610mm
600mm
774mm
810mm
800mm
154mm
Rubber
450kg
RH8-200-RTB
160mm
Rubber
450kg
RH8-200-RTB/SWB
154mm
Polyamide
600kg
RH8-200-NYB
Polyamide
600kg
RH8-200-NYB/
SWB
Polyurethane
600kg
RH8-200-SUB
160mm
Polyurethane
600kg
RH8-200-SUB/
SWB
154mm
Cast Iron
600kg
RH8-200-CIB
91mm
Cast Iron
150kg
JA4-100-CIB
160mm
200mm
Wheel
Material
154mm
150mm
100mm
110mm
60mm
11mm
10mm
240mm 311mm
339mm
650mm
850mm
A combined swivel & wheel brake is available as an optional extra. To order, add SWB to castor reference. The swivel radius will be increased on the 5”
& 6” wheels by 30mm and 15mm respectively. We can also fit unbraked fixed brackets (non swiveling) to special order.
KEY
Castor Dimensions
26
D
Wheel Diameter
H
L
A
L1
B
C
A+B
C1
E
D1
Ross Handling Ltd
Tel: 0116 2764 987
or
Jacking Castors
Extra Heavy Duty Jacking Castors with 76mm lift
Available with 80mm, 100mm, 125mm and 160mm nylon, rubber, cast iron and polyurethane wheels.
2
D
160mm
200mm
Swivel
Radius
135mm
165mm
135mm
165mm
KEY
L
L1
C
C1
D1
Bolt Hole
Size
H
A
B
A+B
E
152mm 106mm
114mm 64mm 13mm
12mm
177.5mm
225mm
240mm
465mm
580mm
152mm 106mm
114mm 64mm 13mm
12mm
236.5mm
265mm
240mm
505mm
620mm
Castor Dimensions
Wheel
Material
Load
Cap.
Part Number
Rubber
300kg
JA6-160-RTB
Polyurethane
750kg
JA6-160-SUB
Rubber
600kg
JA6-200-RTB
Polyurethane
1000kg
JA6-200-SUB
D
Wheel Diameter
H
L
A
L1
B
C
A+B
C1
E
D1
Ross Handling Ltd
Tel: 0116 2764 987
or
27
Footmaster Castors
Footmaster Castors
Footmaster multifunctional castors allow users to move and position large equipment single
handedly. Light, Medium and heavy duty versions available.
Load capacity from 50kg to 1500kg.
Available with flat top plates or threaded stem fixings.
Fitting
Type
28
Load Cap. (KG)
Method of
Operating
Top Plate
(mm)
A
Fixing
Centres
(mm)
B
E
F
G
H
Unit
Weight
(kg)
71 + 10
84
58
42
0.35
RHD-40S
82 + 10
100
70
50
0.75
RHD-60F
82 + 10
100
70
50
0.75
RHD-60S
82 + 10
100
70
50
0.75
RHDR-60F
82 + 10
100
70
50
0.75
RHDR-60S
9
102 + 15
125
85
63
1.35
RHD-80F
70 x 70
9
102 + 15
125
85
63
1.35
RHDR-80F
70 x 70
11
120 + 12
142
95
75
1.85
RHD-100F
120 + 12
142
95
75
1.85
RHD-100S
11
120 + 12
137
95
75
2.10
RHD-120F
13
130 + 15
137
110
97
3.30
RHD-150F
Static
Dynamic
Stem
50
25
Handwheel
Top Plate
250
125
Handwheel
Stem
250
125
Handwheel
Top Plate
250
125
Ratchet
Stem
250
125
Ratchet
Top Plate
500
250
Handwheel
90 x 90
70 x 70
Top Plate
500
250
Ratchet
90 x 90
Top Plate
750
375
Handwheel
95 x 95
Stem
750
375
Handwheel
Top Plate
1000
500
Hex Spanner
95 x 95
70 x 70
Top Plate
1500
750
Hex Spanner
100 x 100
70 x 70
Ross Handling Ltd
Stem
Size
(mm)
C
Bolt
Holes
(mm)
D
M8 x 15
73 x 73
58 x 58
6.5
M12 x 18
73 x 73
58 x 58
6.5
M12 x 18
M16 x 24
Dimensions (mm)
Tel: 0116 2764 987
or
Castor
Ref.
Flexello
Castors
& Wheels
Display
& Point
of Sale
XL Series
A range of light duty castors, available in a zinc or chrome finish and with a choice of a 3”, 4” or 5” polypropylene or grey
rubber wheels. The XL Series castor can be supplied with 2 different fitting options, either a M10, M12 bolt hole or top plate
fitting. Castors can be supplied spring loaded, footbraked or with a combined swivel and wheel brake. Load capacites range
from 45Kg to 125Kg.
11 Series
Medium duty pressed steel, zinc electro-plated castors. Offering 4” or 5” wheels in rubber, polypropylene or polyurethane with
or without roller bearings. Can be supplied with either a top plate, M10 or M12 bolt hole. Footbrake and combined swivel and
wheel brake versions available. Load capacities range from 70Kg to 150Kg.
22 Series
A comprehensive range of medium duty castors covering 4”,5”,6” and 8” wheel diameters with rubber, polyurethane and
nylon treads available with options of cast iron or nylon centres. Fitted with either a top plate or M12 bolt hole. A footbrake or
a combined swivel and wheel brake are also offered. Load capacities 160Kg to 500Kg.
61 Series
The most popular of the flexello castors ranges, the 61 series offers castors from as small as 2” and up to 6” in diameter.
Choose from a wide range of wheels including polyurethane, rubber, nylon, phenolic resin and cast iron. The 61 series also
offers varied fitting types, top plates, triangular plate fittings and a threaded stem and nut fitting in some sizes. Footbrakes are
available on the larger sizes from 3” and upwards. Load capacities start from as little as 27Kg up to 680Kg.
55 Series
A heavy duty pressed steel castors range. 55 series castors are available with a 6” or 8” diameter wheel. Castor wheels
available are nylon, cast iron or cast iron with rubber or polyurethane. The 55 series castor range only comes with a top plate
fitting and is available with a combined swivel and wheel brake. Load capacities start from 400Kg upto 1,090Kg.
SL Series
A versatile heavy duty fabricated range of castors offering a multitude of options. Castor wheel diameters range from 4” to 8”
and are available in cast iron, nylon, rubber and polyurethane. The wheels can be fitted with plain, roller or tapered bearings.
The SL series castors braking options are wheel brake, combined swivel and wheel brake and a 2 way directional lock. Load
capacities range from 160Kg to 600Kg.
GT Series
The GT series is a range of heavy duty fabricated castors fitted with a single ball bearing swivel head with grease nipple
for easy maintenance. Ideal for handling power towing applications at speeds of upto 25Kph. Available with 6”, 8” or 10”
diameter wheels. Castor wheels available are rubber on cast iron, polyurethane on cast iron, cast iron and polyurethane on
nylon. The swivel castors can be fitted with a footbrake or 2 way directional lock. Load capacities go upto 1,270Kg and down
to 370Kg.
Ross Handling Ltd
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
29
1
Flexello
Castors
& Sale
Wheels
Display &
Point of
KV Series
Available in 6”, 8”, 10” and 12” this heavy duty fabricated castor is fitted with a taper roller bearing and ball bearing swivel
head. There are three wheel options available cast iron, rubber on cast iron or polyurethane on cast iron wheels. The swivel
castors can be fitted with a two way directional lock which converts swivel castors to fixed castors by the use of a spring
loaded plunger. The KV series can be power towed at speeds of up to 24Kph, they are also available for high temperature
applications when fitted with the cast iron wheels. Load capacities range from 400Kg to 1,270Kg.
EH Series
An extra heavy duty fabricated range of castors with a double tapered roller bearing swivel head. Ideal for very heavy duty
applications or power towing upto 36Kph. Wheel sizes available range from 6” to 16” in polyurethane with cast iron centres
and 6” to 10” in cast iron. Two way directional locks and expanging hub brakes are available on some sizes. Load capacity on
this range is up to 6,120Kg in optimum conditions.
TOWCASTORS
Flexello towcastors enable ISO freight containers to be moved quickly and efficently without the use of equipment such as
cranes, gantries and side loading fork trucks. Flexello towcastors come as a complete set comprising of 2 swivel and 2 fixed
castors. The heavy duty fabricated castors have special adaptor plates that lock securly into the corner of ISO containers
using the supplied quick action securing screws. Also supplied is a lifting handle and ratchet spanner to facilitate easy use.
Each Flexello towcastor set come in 2 sizes a 10” diameter wheel with load capcity of 10 tonnes and a 12” version with a load
capacity of 12 tonnes. An optional extra is the patented towbar which is specifically designed to fit into the front of the ISO
container corner casting.
30
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Revvo
Display &
PointCastors
of Sale
TS1 Series
The Revvo TS1 series castors is a range of light duty flat top plated castors available in 40, 50 or 63mm wheel diameters
and with the option of either a nylon or grey rubber wheel. The TS1 range can be supplied either as a swivel or fixed castor.
Optional extras for the Revvo TS1 range of castors inclue a footbrake, triangular top plate and threadguards. Load capacities
are low at upto 50Kg. Also available is the BS range with a M8 bolt fitting.
TS2 Series
Revvo’s TS2 top plate castor series is available in 50, 75 and 100mm diameter wheels in either a swivel, fixed or braked
castor. The wheel options available in the Revvo TS2 castors range are nylon and grey rubber. Optional extras are a triangular
top plate and threadguards. Load capacities range from 36Kg to 75Kg. Also available as a M10 bolt hole fitting in the Revvo
BS2 series.
TS3 Series
A light duty pressed steel range of Revvo castors, the TS3 range offers castor wheel sizes including 63mm, 75, 100mm and
125mm. Nylon, grey rubber and cast iron with polyurethane and rubber are all available. The TS3 offers swivel, fixed and
braked top plate castors with load capacities ranging from 30Kg to 125Kg. Triangular top plates and threadgurads are both
available as optional extras. The TS3 range is available with a M12 bolt hole fitting the BS3 series.
TS4 Series
Revvo’s most comprehensive range of castor wheels the TS4 series are pressed steel with a single ball race swivel head.
Castor wheel diameters are 75, 100 and 125mm. The TS4 series has a multitude of wheel options including nylon, phenolic
resin, cast iron and cast iron with rubber or polyurethane tyres. A choice of top plate sizes are also available in the Revvo
TS4 range of castors. Different styles of brakes are available including a wheel lock, footbrake and swivel and wheel lock.
Threadguards and rubber head seals can also be fitted to the TS4 range of castor wheels. Load capacities range from 80Kg
upto 365Kg. Also available as a M12 bolt hole castor in the BS4 series.
TS5 Series
The TS5 series of castors can cater for loads up to 1,000Kg. Available in either 150mm or 200mm diameter wheels this single
ball race range of castors is available with lots of castor wheel options including nylon, cast iron, polyurethane on nylon and
cast iron with rubber or polyurethane. There are 3 brake options available, wheel lock, footbrake or a swivel and wheel lock.
Threadguards and head seals are also available as optional extras. The BS5 series can be supplied as a unique M19 bolt hole
fitting.
TSE Series
Revvo castors TSE series is a pressed steel castor range with a double ball race. Available in 100, 125, 160 and 200mm
swivel, fixed or swivel and wheel lock castors. Wheel options available are nylon, polypropylene, polyurethane, non marking
grey rubber and black rubber with plastic, pressed steel and aluminium centres. Triangular top plates, threadguards and
rubber heads seals are all optional extras.
TSG Series
The TSG series top plate fixing castors provides a bridge between pressed steel and the more robust fabricated range.
Suitable for loads up to 450Kg they come in 100, 125, 150 and 200mm diameter castors. Fitted with either nylon, cast iron or
cast iron with rubber or polyurethane wheels. Optional extras include a wheel lock, footbrake and a 4 way directional lock.
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
31
1
Revvo
DisplayCastors
& Point of Sale
TSH Series
Revvo’s TSH series top plate range of fabricated castors are strong and extremely robust. Supplied with nylon seals and a
hydraulic grease nipple for easy maintenance it is a castor with real clout. Complimented by Revvo’s range of heavy duty
nylon, cast iron, steel and polyurethane wheel this castor is suitable for the most hardened enviroments. Wheel sizes range
from 100mm up to 300mm with load capacities reaching 1,500Kg. The Revvo TSH series offers 3 top plate sizes and can
be supplied a wheel brake, swivel and wheel brake, wheel lock as braking options. A specialist leverlock can also be fitted
where a rocking pedal presses a plunger onto the wheel and also locks the swivel. A 2 way directional lock is also available
to retro fit.
2SH Series
Revvo castors twin wheel version of their TSH series of castor wheels has a larger ‘footprint’ for easier turning due to
differentail action of the wheels. The 2SH fabricated twin wheel castor range is available in 125, 150 and 200mm with either
cast iron or polyurethane on cast iron. A wheel lock, directional and lock leverlock are available. The 2SH fabriacted twin
castor can carry loads up to 1,500Kg.
TSP Series
The TSP series encorporates two large diameter hardened ball races, which makes it ideal for tow trailer applications.
Maximum towing speeds of 6kph or 3.7mph for maximum load capacities. Wheel types are cast iron, polyurethane on cast
iron, rubber on cast iron and steel, available in 150, 200, 250 and 250mm diameters. The fabricated TSP series can be fitted
with a 4 way directional or footbrake. Load capacities for the TSPO fabricated castor is up to 2,000Kg.
SS/SJE Series
A comprehensive range of scaffold castors from the British castors manufacturer Revvo. Available in 2 different styles the SS
series with an offset wheel available in 100, 125, 150 and 200mm diameter nylon, cast iron, polyurethane and rubber wheels.
Offered in a wide range of sized socket or plug fittings with load capacities up to 820Kg or the SJE series which has a zero
offset and is paticularly designed for aluminium scaffolding. Wheel diameters for the Revvo SJE series of castors are 125,
150 and 200mm. Fittings are either a 38mm plug, 50.8mm socket or top plate with load capacities up to 1,000Kg. Brakes are
available on both ranges to ensure maximum safety is achievable.
32
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Pneumatic
Display&&
Trolley
Point Wheels
of Sale
PD Series
Wheel
Diameter
6" (150mm)
7" (180mm)
8" (200mm)
Tread
Width
39mm
45mm
45mm
Load
Cap.
30kg
50kg
50kg
ABC Series
Wheel
Diameter
80mm
100mm
125mm
160mm
200mm
Tread
Width
21mm
24mm
31mm
40mm
33mm
Load
Cap.
30kg
35kg
50kg
100kg
130kg
EPR Series
Wheel
Diameter
6" (160mm)
6" (160mm)
8" (200mm)
8" (200mm)
8" (200mm)
10" (250mm)
11" (270mm)
Tread
Width
30mm
30mm
30mm
30mm
30mm
60mm
60mm
Load
Cap.
150kg
150kg
200kg
200kg
200kg
275kg
150kg
Hub
Length
38mm
38mm
38mm
Hub
Bore
1/2"
1/2"
1/2"
Reference
Plain
PD-6
PD-7
PD-8
Hub
Length
37mm
35mm
44mm
44mm
44mm
Hub
Bore
8mm
10mm
15mm
20mm
20mm
Reference
Plain
A-80
A-100
A-125
AB-160
AB-200L
Hub
Length
51mm
51mm
51mm
51mm
51mm
51mm
59mm
Hub
Bore
3/4"
1"
1/2"
3/4"
1"
1"
1"
Reference
Plain
EPR-6 (3/4")
EPR-6 (1")
EPR-8(1/2")
EPR-8 (3/4")
EPR-8 (1")
EPR-10 (1")
EPR-11 (1")
GB Series (Sandhopper)
Wheel
Diameter
10 5/8" (270mm)
12" (300mm)
Tread
Width
98mm
55mm
Load
Cap.
125kg
150kg
Hub
Length
56mm
51mm
Hub
Bore
1"
1"
Reference
Plain
GB-270 (1")
GB-300
PW Series (Plastic Centres)
Wheel
Diameter
8 3/4" (220mm)
10 1/4" (260mm)
10 1/4" (260mm)
16" (400mm)
16" (400mm)
Tread
Width
65mm
85mm
85mm
100mm
100mm
Load Hub
Hub
Cap. Length Bore Wheel Reference
100kg 76mm 1"PB
PW-250-4-25.4-76
120kg 76mm 1"PB
PW-300-4-25.4-76
120kg 76mm 1"RB PWR-300-4-25.4-76
150kg 68mm 1"PB
PW-400-8-25.4-68
150kg 75mm 1"RB PWR-400-8-25.4-75
PW Series (Puncture Proof)
Wheel
Diameter
10 1/4"
(260mm)
10 1/4"
(260mm)
Tread Load Hub
Hub
Width Cap. Length Bore
20mm
85mm 120Kg 75mm
RB
85mm
120Kg
75mm
16" (400mm) 105mm 180Kg
75mm
16" (400mm) 105mm 180Kg
75mm
1" RB
Wheel Reference
PWR-250-4-20-76/PP
PWR-250-4-25.4-76/PP
20mm
RB
1" RB
PWR-400-4-20-75/PP
PWR-400-4-25.4-75/PP
“Light duty wheels - tough
moulded polypropylene centres
fitted with ribbed tyres. PD range
is specially designed for grass
cutting machines and other light
horticultural applications.”
“Traditional light industrial range
of wheels. The centres are black
polypropylene with black rubber
tyres.”
“Light industrial range of cushion
tyred wheels having red centres with
black tyres. Ideally suited for sack
trucks and trolleys etc. Alternative
diameters and hub bores available.”
On 1” plain bore wheels we can supply
bushes that will reduce thebore size
to: 1/2” or 20mm. The hub lengths will
then be increased by 8mm and the
load capacity reduced by 50%.
“Extra wide tread wheels.Suitable for
barrows, launching trolleys and any
outdoor application.”
“Pneumatic tyred wheels suitable for
low speed applications. Red centres
with black tyres 4 ply rating.”
“Black, puncture-proof lightweight
micro-cellular polyurethene tyre on
red polypropylene centre”
PW Series (Metal Centres)
Wheel
Diameter
Tread
Width
8" (200mm)
48mm
Load
Hub
Cap. Length Hub Bore
75kg
60mm
20mm RB
Reference
Plain
WAT-8RBM20
10 1/4" (260mm)
85mm
200kg
76mm
20mm RB
PWMR-300-4-20-76
10 1/4" (260mm)
85mm
200kg
76mm
1"RB
PWMR-300-4-25.4-76
*16" (400mm)
100mm
250kg
75mm
1"RB
PWMR-400-8-25.4-76/DD
“Pneumatic tyred
wheels suitable for low
speed applications.
Grey Metal centres with
black tyres 4 ply rating.”
* The 16” diameter wheel has a red metal centre and is alsoavailable in black to special order.
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
33
1
Display &
Plastic
& Nylon
Point of
Wheels
Sale
PL Series
Light Duty Plastic Wheels
Finish: Black
Wheel
Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference
Plain
2" 50mm
22mm
70kg
28mm
8mm
50-PL
3" 75mm
22mm
80kg
29mm
8mm
75-PL
4" 100mm
22mm
90kg
30mm
8mm
100-PL
RP Series
Light Duty Grey Rubber Tyred Wheels
Finish: Grey/Grey
Wheel
Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference
Plain
2" 50mm
22mm
60kg
27.5mm
8mm
50-RP
3" 75mm
23mm
70kg
28mm
8mm
75-RP
4" 100mm
26mm
80kg
30mm
8mm
100-RP
NV Series
Medium Duty Nylon Wheels
Finish: White
Wheel
Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference
Plain
3" + 80mm
30mm
100kg
39mm
12mm
80-NV
4" 100mm
30mm
130kg
39mm
12mm
100-NV
5" 125mm
38mm
200kg
44mm
15mm
125-NV
PV Series
Medium Duty Rubber Tyred Wheels
Finish: Black/Black
Wheel
Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference
Plain
3" + 80mm
22mm
50kg
39mm
12mm
80-PV
4" 100mm
22mm
70kg
39mm
12mm
100-PV
5" 125mm
27mm
100kg
44mm
15mm
125-PV
GV Series
Wheel
Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference
Plain
3" + 80mm
22mm
50kg
39mm
12mm
80-GV
4" 100mm
22mm
70kg
39mm
12mm
100-GV
5" 125mm
27mm
100kg
44mm
15mm
125-GV
RJ Series
Wheel
Diameter
34
Ross Handling Ltd
Medium Duty (non-marking) Rubber Tyred Wheels
Finish: Grey/Black
Medium Duty (non-marking) Rubber Tyred Wheelchair Wheels
fitted with ball journal bearings. The 24” is also available with
synthetic or polyurethane tyres.
Tread Width
Load Cap.
Hub Length
Hub Bore
Wheel
Reference
6" 150mm
30mm
60kg
36mm
8mm
RJP-150
8" 200mm
30mm
70kg
53mm
8mm
RJP-200
24" 610mm
28mm
50kg
56mm
12mm
RQP-610
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Rubber
& High Temperature
Display
& Point ofWheels
Sale
PVR Series
Wheel
Diam.
3" + 80mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
Tread
Width
27mm
23mm
23mm
25mm
33mm
Medium/Heavy Duty Rubber Tyred Wheels
Finish: Black/Black, Red centres on 5”, 6” and 8” wheels.
Load
Cap.
70kg
80kg
100kg
150kg
200kg
Hub
Length
45mm
45mm
45mm
58mm
58mm
GVR Series
Wheel
Diam.
3" + 80mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
Tread
Width
27mm
23mm
23mm
25mm
33mm
Ref. Plain
Ref. Roller
12-20mm
12-20mm
12-20mm
15-23mm
15-23mm
80-PVP-20mm
100-PVP-20mm
125-PVP-20mm
160-PVP-23mm
200-PVP-23mm
80-PVR-12mm
100-PVR-12mm
125-PVR-12mm
160-PVR-15mm
200-PVR-15mm
Medium/Heavy Duty (non-marking) Rubber Tyred wheels
Finish: Grey/Black
Load
Cap.
70kg
80kg
100kg
150kg
200kg
Hub
Length
45mm
45mm
45mm
58mm
58mm
RN Series
Wheel
Diam.
3" + 80mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
Hub Bore
Hub Bore
Ref. Plain
Ref. Roller
12-20mm
12-20mm
12-20mm
15-23mm
15-23mm
80-GVP-20mm
100-GVP-20mm
125-GVP-20mm
160-GVP-23mm
200-GVP-23mm
80-GVR-12mm
100-GVR-12mm
125-GVR-12mm
160-GVR-15mm
200-GVR-15mm
Heavy Duty Blue Elastic Rubber Tyred Wheels
Finish: Blue/Black
Tread
Width
36mm
29mm
34mm
40mm
40mm
Load
Cap.
150kg
200kg
250kg
350kg
400kg
Hub
Length
40mm
44mm
44mm
60mm
60mm
Hub Bore
Ref. Plain
Ref. Roller
12mm
12mm
12mm
20mm
20mm
-
80-RNB
100 RNB
125 RNB
160 RNB
*200 RNB
The 8” diameter wheels are fitted with ball journals
Heavy Duty phenolic resin, high temperature
wheels. Temp range from: -40°C + 280°C
Finish: Black
TH Series
Wheel Diam.
Tread Width
Load Cap.
Hub Length
Hub Bore
Ref. Plain
3" + 80mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
35mm
35mm
35mm
40mm
50mm
100kg
125kg
150kg
250kg
300kg
40mm
40mm
40mm
58mm
58mm
12mm
12mm
12mm
20mm
20mm
80-TH
100-TH
125-TH
160-TH
200-TH
HT Series
Heat Resisting Rubber Wheel. Fitted with precision ball bearings.
Temp range from: -30°C + 260°C
Finish: Red/Silver
Wheel Diam.
Tread Width
Load Cap.
Hub Length
Hub Bore
4" 100mm
34mm
60kg
38mm
12mm
MPVR Series
Wheel
Diam.
80mm
100mm
125mm
160mm
200mm
Ross Handling Ltd
Tread
Width
25mm
30mm
37mm
40mm
50mm
Ball
Bearing
100-HT
Black rubber tyre on metal centres
Finish: Black/Zinc
Load Cap.
Hub Length
Hub Bore
Ball Bearing
50Kg
70Kg
90Kg
160Kg
205Kg
40mm
40mm
45mm
60mm
60mm
12mm
12mm
15mm
20mm
20mm
80-MPVR
100-MPVR
125-MPVR
160-MPVR
200-MPVR
Tel: 01162764987
Tel: 0116 2764 987
or
Email:
or Email:
35
1
Nylon & Polyurethane
Wheels
Display
& Point of Sale
NY Series
Wheel
Diam.
3" + 80mm
4" 100mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
8" 200mm
Tread
Width
34mm
34mm
35mm
38mm
40mm
46mm
38mm
Load
Cap.
150kg
200kg
150kg
300kg
350kg
400kg
450kg
HNY Series
Wheel
Diameter
5" 125mm
6" + 160mm
8" 200mm
Tread Width
Load Cap.
Hub Length
Hub Bore
50mm
50mm
50mm
700kg
700kg
800kg
60mm
60mm
60mm
20mm
20mm
20mm
Tread
Width
30mm
38mm
30mm
30mm
40mm
50mm
Load
Cap.
100kg
150kg
150kg
200kg
400kg
500kg
36
Ross Handling Ltd
Hub
Length
44mm
44mm
44mm
44mm
59mm
59mm
Hub Bore
Ref. Plain
Ref. Roller
12mm-20mm
12mm-20mm
12mm-20mm
12mm-20mm
20mm
20mm
80-PN-20mm
*80-PN-20mm
100-PN-20mm
125-PN-20mm
-
80-PNB-12mm
*80-PNB-12mm
100-PNB-12mm
125-PNB-12mm
160-PNB-20mm
200-PNB-20mm
Extra Heavy Duty Polyurethane Tyred Wheels on cast iron centres
Finish: Yellow/Black
Load Cap.
Hub Length
Hub Bore
Ref. Ball Journal
50mm
50mm
50mm
60mm
50mm
60mm
80mm
80mm
450kg
550kg
770kg
850kg
1000kg
1200kg
1800kg
1800kg
60mm
60mm
60mm
60mm
60mm
60mm
90mm
90mm
20mm
20mm
20mm
20mm
20mm
20mm
25mm
30mm
100-HSUB-50-20
125-HSUB-50-20
160-HSUB-50-20
160-HSUB-60-20
200-HSUB-50-20
200-HSUB-60-20
250-HSUB-80-25
250-HSUB-80-30
Extra Heavy Duty Rubber Tyred Wheels on aluminium centres.
Finish: Black/Silver
Tread Width
Load Cap.
Hub Length
Hub Bore
50mm
50mm
50mm
300kg
400kg
500kg
60mm
60mm
60mm
20mm
20mm
20mm
PAL Series
Wheel
Diameter
100mm
125mm
160mm
200mm
Ref. Ball
Journal
125-HNYB
160-HNYB
200-HNYB
Tread Width
HRT Series
Wheel
Diameter
5" 125mm
6" + 160mm
8" 200mm
80-NYB-12mm
100-NYB-12mm
100-POR-12mm
125-NYB-12mm
160-NYB-20mm
200-NYB-15mm
-
Heavy Duty Polyurethane Tyred Wheels on nylon centres
Finish; Maroon/White. * Alternative Grey/Grey on 3” only.
HSU Series
Wheel
Diameter
4" 100mm
5" 125mm
6" + 160mm
6" + 160mm
8" 200mm
8" 200mm
10" 250mm
10" 250mm
Ref. Roller
Extra Heavy Duty Nylon Wheels
Finish: White
PN Series
Wheel
Diam.
3" + 80mm
3" + 80mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
Heavy Duty Nylon Wheels
Finish: White
Hub
Hub Bore
Ref. Plain
Length
44mm
12mm
80-NY-12mm
44mm
12-20mm
100-NY-20mm
40mm
12mm
44mm
12-20mm
125-NY-20mm
58mm
20mm
160-NY-20mm
58mm
15-20mm
200-NY-20mm
60mm
25.4mm (1")
WNY-8L
Ref. Ball
Journal
125-HRT
160-HRT
200-HRT
Polyurethane tyre on Aluminium centres with ball bearings
Finish: Yellow/Zinc
Tread Width
Load Cap.
Hub Length
Hub Bore
40mm
50mm
50mm
50mm
300Kg
350Kg
800Kg
800Kg
45mm
60mm
60mm
60mm
8mm
15mm
20mm
20mm
Ref. Ball
Journal
100-PAL
125-PAL
160-PAL
200-PAL
Tel: 01162764987
or Email:
Tel: 0116 2764 987
or Email:
Anti-Static
Wheels
& Pallet
Display
& Point
ofRollers
Sale
ASR Series
Wheel
Diam.
*3" + 75mm
4" 100mm
5" 125mm
6" + 160mm
8" 200mm
Tread
Width
25mm
22mm
27mm
24mm
30mm
Heavy Duty Anti-static (Electrically conductive)
Rubber Wheels on Metal Centres.
Finish: Black/Zinc
Load
Cap.
75kg
70kg
100kg
135kg
205kg
Hub
Length
26mm
45mm
45mm
58mm
58mm
Hub Bore
Ref. Plain
Ref. Roller
8mm
12mm
15mm
20mm
20mm
*75-ASPR
-
100-ASR
125-ASR
160-ASR
200-ASR
* The 3” is plastic centred with a plain bore.
Polyurethane Pallet Rollers on nylon centres
Finish: Brown/White
PR Series
Type of Roller
Roller Diam.
Roller Width
Hub Bore
Load
Capacity
Ref.
Ball Journal
Polyurethane
82mm
200mm
100mm
50mm
*20mm
20mm
750kg
450kg
82-PR
200-PR
* 25mm hub bores also available. Extra heavy duty rollers on cast iron centres available to special order
Nylon Pallet Rollers
Finish: White
NP Series
Type of Roller
Roller Diam.
Roller Width
Hub Bore
Load
Capacity
Ref.
Ball Journal
Nylon
82mm
82mm
82mm
200mm
60mm
75mm
100mm
50mm
*20mm
*20mm
*20mm
*20mm
500kg
700kg
950kg
650kg
60-NP
75-NP
82-NP
200-NP
* 25mm hub bores also available.
NSS Series
Cushioned Tyred Wheels with Pressed Steel Centres
Finish: Black/Zinc
Wheel
Diam.
Tread
Width
Load
Cap.
Hub
Length
Hub Bore
Ref. Plain
Ref. Roller
6" 150mm
35mm
150kg
51mm
25.4mm
NSS-6(Z)
NSS-6R(Z)
7" 175mm
40mm
225kg
51mm
25.4mm
NSS-7(Z)
NSS-7R(Z)
8" 200mm
50mm
250kg
51mm
25.4mm
NSS-8(Z)
NSS-8R(Z)
10" 250mm
50mm
350kg
51mm
25.4mm
NSS-10(Z)
NSS-10R(Z)
12" 300mm
50mm
400kg
51mm
25.4mm
NSS-12(Z)
NSS-12R(Z)
Solid Rubber Tyred Wheels with Plastic Centres
Finish: Black/Red
PB Series
Wheel Diam.
Tread Width
Load Cap.
Hub Length
Hub Bore
Ref.
Plain
13" 330mm
14" 350mm
16" 400mm
70mm
52mm
90mm
250kg
300kg
350kg
66mm
66mm
66mm
25.4mm
25.4mm
25.4mm
PBW-330RIB
PBW-350RIB
PBW-400RIB
BW Series
Heavy Duty Rubber Wheels on Metal Centres.
Finish: Black/Red
Wheel
Diam.
Tread
Width
Load
Cap.
Hub
Length
Hub Bore
Ref. Plain
Ref. Roller
13" 330mm
70mm
300kg
66mm
25.4mm
BWG-330RIB
-
*14" 350mm
75mm
400kg
66mm
25.4mm
BWG-350RIB
BWR-350RIB
*16" 400mm
100mm
500kg
66mm
25.4mm
BWG-400RIB
BWR-400RIB
18" 455mm
115mm
1100kg
75mm
35mm
-
VBW-455RIB
* Hub length reduced to 63.5mm when fitted with bearings.
Ross Handling Ltd
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
37
1
Cast
Iron, Grooved
& Flanged
Rail Wheels
Display
& Point
of Sale
CI Series
Wheel
Diam.
3" 75mm
4" 100mm
5" 125mm
6" 150mm
8" 200mm
10" 250mm
Tread
Width
32mm
38mm
41mm
45mm
45mm
51mm
Heavy Duty Cast Iron Wheels
Finish: Black
Load
Cap.
170kg
400kg
500kg
900kg
1000kg
1360kg
Hub
Length
39mm
48mm
48mm
60mm
60mm
60mm
Hub Bore
Ref. Plain
Ref. Roller
12mm
15mm
15mm
20mm
20mm
25mm
WCI-3M12
WCI-4M15
WCI-5M15
WCI-6M20
WCI-8M20
-
WCI-4RBM15
WCI-5RBM15
WCI-6RBM20
WIC-8RBM20
WCI-10RBM25
Extra Heavy Duty Cast Iron Wheels fitted with
Taper Roller Bearings
Finish: Black
HC Series
Wheel Diam.
Tread Width
Load Cap.
Hub Length
Hub Bore
6" 150mm
10” 250mm
10" 250mm
70mm
76mm
102mm
3000kg
3270kg
5500kg
92mm
92mm
148mm
31.8mm
31.8mm
34.9mm
GR Series
Wheel Diam.
3"
4"
5"
6"
*6"
8"
75mm
100mm
125mm
150mm
150mm
200mm
Ref. Taper
Roller
WHC-306 TM
WHC-310 TM
WHC-510 TM
V-Grooved Cast Iron Wheels
Finish: Silver
Additional sizes of Grooved Wheels are also available to special order.
Tread Width
Hub Length
Hub Bore
Load Capacity
Ref. Roller
37mm
46mm
38mm
45mm
48mm
45mm
60mm
60mm
60mm
60mm
60mm
60mm
20mm
20mm
20mm
25mm
20mm
25mm
225kg
250kg
265kg
910kg
1020kg
910kg
075-CVIB
100-CVIH
125-CVIH
150-CVIH
WGR-6RBM20
200-CVIH
*Black finish on WGR-6RBM20.
SF Series
Wheel
Diam.
55mm
85mm
105mm
133mm
175mm
Overall
Diam.
70mm
100mm
125mm
160mm
200mm
Single flanged beam radiused steel wheel with steel stub axles
Finish: Steel.
Thread
Width
25mm
25mm
25mm
35mm
35mm
CF Series
Wheel
Diameter
4" 100mm
5" 125mm
6" 150mm
8" 200mm
8” 200mm
10" 250mm
12" 300mm
38
1
Ross Handling Ltd
Overall
Width
35mm
35mm
35mm
47mm
50mm
Stem Size
M16 x 40mm
M24 x 52mm
M24 x 62mm
M30 x 63mm
M36 x 73mm
Ref.
Roller
55-SF
85-SF
105-SF
133-SF
175-SF
Cast Iron Single Flanged Rail Wheels
Finish: Silver, Black also available on some versions.
Additional sizes of single flanged wheels are also available to special order.
Tread Width
Load Cap.
Hub Length
Hub Bore
33mm
50mm
35mm
58mm
800kg
900kg
910kg
1500kg
60mm
50mm
57mm
58mm
20mm
20mm
20mm
25mm
ST Series
Wheel
Diameter
2" 50mm
6" 150mm
Load
Capacity
160Kg
370Kg
700Kg
1,000Kg
1,500Kg
Ref. Roller &
Ball Bearing
100-CFIH
125-CFIH
150-CF2H
200-CF2H
Extra Heavy Duty Steel Wheels
Finish: Black (Silver on some sizes).
Solid steel wheels fitted with ball and taper roller bearings.
Tread Width
Load Cap.
Hub Length
Hub Bore
14mm
50mm
55mm
85mm
100mm
100mm
135kg
1130kg
2500kg
5080kg
5450kg
5500kg
17mm
48.3mm
53mm
81mm
108mm
108mm
12mm
20mm
31.7mm
50mm
30mm
30mm
Ref. Ball
& Taper
050-STOL-PLAIN
150-ST2H
200-STTP
200-ST3T
250-STT
300-STT
Tel: 01162764987
Tel: 0116 2764 987
or Email:
or Email:
Special Application Wheels,
Axle’s & Axle Collars
Steel Flat
Tread
Keyway
Polyurethane
Heavy Duty
Antistatic
Wheelie Bin Wheels
Double Flanged
VG Series
Nylon V-Grooved wheels with ball bearings ideal for use on pulleys or as a track guide wheel on light duty applications.
Wheel Diameter
Tread Width
Hub Length
Hub Bore
Load Capacity
Groove Width
Ref.
50mm
13mm
5mm
10mm
50Kg
4mm
50-NYVG
78mm
19mm
5mm
10mm
138Kg
8mm
78-NYVG
98mm
20mm
20mm
10mm
150Kg
6mm
98-NYVG
Axles
Mild Steel Tubing axles ideal for our range of wheels.
Tube Diam.
Gauge
Length
20mm
1.5
Cut to length upto 6.1m
25.4mm
1.5
Cut to length upto 6.1m
Axle Collars
Cast Iron Axle Collars can be used for easily securing wheels to anything with a flat base best utilized in
conjnction with our axle and starlock fastner range.
Axle Diam.
Plate Size
Bolt
spacing
Bolt
Diam.
Height to Avle
Centre
Overall
Height
Ref.
12mm
80mm x 34mm
52mm
12mm
14mm
50mm
12mm AXLE COLLAR
20mm
80mm x 34mm
52mm
12mm
14mm
50mm
20mm AXLE COLLAR
25.4mm
92mm x 40mm
64mm
12mm
22mm
62mm
1" AXLE COLLAR
Ross Handling Ltd
Tel: 0116 2764 987
or
39
Display Application
& Point of Sale
Special
Castors
Glass Handling
Twin Wheeled
40
1
Ross Handling Ltd
Scaffolding
Stair Climber
Puncture Proof
Shock
Absorbing
Tel: 0116 2764 987
or Email:
Tel: 01162764987
or Email:
Terms & Conditions of Sale
1. DEFINITIONS
6. TITLE AND RISK
The following definitions shall apply to the following phrases when used in these
conditions:
The Goods remain the sole and absolute property of the Company until the Purchaser
has paid for the Goods in full. The Goods are insured by and at the risk of the Company
until they are off loaded at the Purchases delivery address, place of business or otherwise
specified address. It is then the purchaser’s responsibility to insure the Goods. Purchasers
right to possession of the Goods terminates if the Purchaser has failed to pay for the
Goods in full or has a Bankruptcy order made against them.
• ‘’The Company’’ means Ross Handling Ltd
• ‘’ The Goods ‘’ means any standard goods supplied by the company to the purchaser under contract subject to these conditions
• ‘’ The Purchaser’’ means the person(s), firm or company (including the consumer) –whose order for the Goods is accepted by the Company.
• ‘’The Consumer’’ means an individual who enters into a contract for purpose which is outside its trade, business or profession. The consumers will be governed by Distance Selling Regulations ( DSR’s )
The purchaser, to whom the goods are to be supplied, are subject to these conditions:
Our Terms and Conditions apply to all contracts for the sale of Goods by the Company,
any deviations are not accepted unless we expressly agreed to them in writing. They
are Governed by English Law. The placing of the order will be deemed to constitute
acceptance of these terms. These conditions will apply to all future contracts, written or
verbal for the supply of goods.
2. QUOTES AND ORDERS
7. WARANTEES AND CONDITIONS
The warrantees and conditions contained in the Sale of Goods Act 1979 shall apply to
this contract and all other warrantees and conditions wether express or implied are hereby
excluded provided that:
a) The Company may very designs and specifications or modift the Goods supplied
without prior notice, provided such modifications do not adversely effect the performance
of the Goods.
b)The Company shall be under no liability to the Purchaser or any third party for any
consequential or economic loss or expenses.
c) The Company shall be under no liability for breach of any of the said conditions and
warrantees arising from defects in the Goods unless a claim has been notified within 6
months form the date the Goods were delivered.
Quotes are valid for 30 days from the date of the quote. Quotations are subject to
alteration and withdrawal without notice by the Company. Whilst we will make every
effort to maintain prices quoted, often unexpected rises in material costs or changes
in quantities ordered by the purchaser my affect prices quoted. Orders or acceptance
of a quotation, are accepted by the Company, with either a written purchase order , fax
or e mail and / or verbal confirmation of the order. Minimum order values are £10 ( exc.
Carriage and VAT )Acceptance of the order by the Company is deemed as the Purchaser
or Consumer accepting the Terms and Conditions of Sale.
d) The Company may at its option either repair or replace any Goods which may be found
to be defective.
3. PRICE
8. DAMAGES AND SHORTAGES
The price quoted upon application to the Company is exclusive of VAT. All prices quoted
are subject to carriage unless the Goods are collected by the Purchaser, or Purchasers
courier. The Company reserves the right to alter any of its prices at any time and Goods
despatched after the date of such alteration shall be invoiced at the rate then prevailing.
Where quantities ordered vary from those quoted for, the Company reserves the right to
requote.
The Company will credit or replace any products that we agree are defective or damaged,
free of charge and carriage free. Providing such Goods are not defective due to misuse
and the Purchaser informs the Company within 3 working days of receipt. The Company
does not accept liability for expenses incurred by Purchaser on such defective products
or for any direct or consequential damage arising from such a defect. Misuse, can refer
to using the Goods for a purpose other than specified and intended. For example using
higher loads than specified in the Company literature or web site. Using on uneven floors,
in extremes of temperatures, using around hazardous chemicals, rough use, impacts,
foreign matter intrusions, excessive speeds or any modifications made. Shortages must
also be advised to the Company within 3 working days otherwise we cannot accept
claims. The Company will not be liable for any failure or delay or for the consequential
loss of any failure or delay in performance of the contract if it is due to any event or force
majeure, beyond the reasonable control of the company.
4. DESCRIPTIONS, SAMPLES AND LITERATURE
All descriptions, drawings, sizes, specifications issued by the Company or published in
Company literature must not be relied upon by the Buyer, as they are issued to give an
approximate idea.
5. PAYMENT
Where no credit account has been opened, the Purchaser is required to pay in advance
for the Goods. In order to set up a credit account the Purchaser would need to apply to
the Company directly for more information.
Where a credit account has been opened the invoice for the Goods will become due 30
days from the date of the invoice. In the event that the purchaser fails to make payment by
that date the Company may without prejudice to any other rights which it may have:
a) Suspend all further deliveries to the Purchaser under the contract in question or any
other contract.
b) Require payment in advance for any future deliveries
c) Require payment of interest on the amount due at a compound annual rate of 3% per
annum above the Bank of England Base Rate for the time prevailing from the date when
payment becomes due to the actual date of payment
d) Withdraw the credit account at any time and make credit reference searches in relation
to the buyer.
e) Reduce and or remove the credit limit and review on a quarterly basis.
5. DELIVERY
Unless otherwise agreed the Goods will be sent to the Purchaser by courier service and
unless contrary instructions are received, the Goods will be delivered to the Purchasers
place of business and or Invoice address. Therefore transport of the Goods will be subject
to the couriers conditions, which are available upon request.
Any period of time or dates quoted for delivery of the Goods are approximate and will
not be the essence of the contract. The Company will not be liable for any claim for
any shortages, pilferage or damage to Goods unless the Company is advised within 3
working days of delivery. This is in addition to and does not affect a Consumers rights in
relation to defective goods given to consumers by law. Should the Goods be returned
due to incorrect ordering on the part of the Purchaser, the Company reserves the right to
charge 20% restocking charge and will not refund carriage. Should the Purchaser fail to
take delivery, or fail to give the Company adequate delivery instructions in advance then
the Company will have deemed to have delivered the Goods, and carriage will not be
refunded. The Company will not be liable for any claim for non delivery unless advised by
the Purchaser within 7 days of the relevant Invoice Date. Any delay in delivery does not
entitle the Purchaser to terminate the contract, unless and until the Purchaser has given a
specific amount days written notice to the Company requiring delivery to be made and the
Company has not fulfilled the delivery.
e) The Company’s liability for any loss or damage caused by any defect in the Goods shall
be limited to the amount paid or payable by the Purchaser to the Company for the Goods.
f) Third Parties , unless the right of enforcement is expressly provided, it is not intended
that a third party should have the right to any part of this contract pursuant to the Contract.
( Rights of Third Parties 1999)
9. TERMINATION
The Company does not accept termination of special orders (which are defined as non
standard stock items). These goods are non refundable. The Company reserves the right
to terminate the contract to supply Goods should the Purchaser enter into insolvency,
bankruptcy, or any arrangements with its creditors, or breach the contract.
10. LIMITATION OF LIABILITY
If the Goods are or any part thereof are defective solely as a result of faulty materials or
workmanship of the Company, the Company’s liability shall be limited, at its discretion,
either by replacing such goods or the defective part, or by giving the Purchaser credit for
the value. No such liability shall arise unless notification of any defect is received by the
Company within 3working days
11. INDEMNITY
The Purchaser agrees to indemnify the Company against liabilities incurred by the
Company ( including damages, losses and expenses) awarded against or incurred by
the Company by reason of any proceedings, claims or demand which may be made or
brought against the Company: either
a) Alleging infringement of any patent copyright or other rights of third parties by reason
of anything done by the seller in accordance with the Purchaser designs, specifications or
instructions express or implied or
b) Alleging injury, death, loss or damage to any third party or property of third party by
reason of any defect in any of the goods when the same have been supplied by the
Company in accordance with the Purchasers designs, specifications or instructions
express or implied
12. CONSUMERS
– GOVERNED BY DSR (Distance Selling Regulation) details upon application to the
Company
13. EXPORT
– Details upon application to the Company
14. LAW
The formation, existence and construction of this contract of terms and conditions is
Governed by English Law and shall be subject to the jurisdiction of English Courts
Ross Handling Ltd
Tel: 0116 2764 987
or
41
GS
NDWHEEL
HA
S
H AN
DGRIPS
B
U
T
D FITTI
N
E
E
N
AD
J
&
USTABLE
T
E
FE
Ross Handling Ltd
71 Cannock Street Leicester LE4 9HR
Tel: 0116 276 4987 Fax: 0116 274 1751
E-mail: sales@rosshandling.co.uk
www.rosshandling.co.uk

castors wheels - Ross Handling

Transcription

Similar documents

4210 LOAD BEARING CASTORS PRODUCT DATA SHEET

Pool of Radiance^Codewheel

VL-Whisper - Clay

Motorcycle Wheel Balancing and Truing Stand Assembly Instructions

Tactair Paris Air Show Evite 2015

www.livorsi.com/auto Quick Release Billet Hub Adapter Kit

antique car replica / horseless carriage wheels

OmegaTrac Brochure - MTS Mobility Solutions

BestFlex 300 Gravity Skatewheel Conveyor Brochure and product