70798 Stanley EBTools 2012:Layout 1

EB Tools
Deliver Value Over the Life Cycle of Use
Return on Investment (ROI)
EB Tools can improve ROI in a new assembly process by providing a lower overall life cycle
cost as compared to pneumatic and other DC electric tool solutions. When comparing tooling
solutions, it is important to look at the Total Cost of Ownership, which includes operating
costs as well as up-front acquisition costs.
Higher MTBF = Fewer Failures
Long life components significantly reduce frequency of repairs. The doubleshielded ball bearings and integral temperature monitor make EB tools more
Mean Time Between Failures reliable. A non-contact optical switch under the start lever eliminates
mechanical or magnetic switches which wear out over time.
Higher MTTR = Faster Repairs
Unlike other DC electric tools, EB Tools from Stanley are manufactured with modular
construction, making them less complex and less costly to repair.
Mean Time To Repair
Modularity
Common modular controllers and tool components,
within the EB Line, allow a manufacturer to draw on
a smaller inventory of interchangeable parts to
maintain a production line of any size or complexity.
Other DC electric systems require more unique
controller and tool components.
Ergonomics
QPM ATC prevents sudden downshifting, which
can reduce operator fatigue, and torque reaction
impulse as compared to other DC electric tools.
Soft stop feature prevents sudden change in
torque reaction to the operator.
EB Tools
Full Line of Tools: Hand Held
and Fixtured to 2000 Nm
Assembly Technologies
• Industry Leading Power to Weight Ratio
• Higher Speed and Precision
• Wide Range of Tool Configurations Fit the Application
WORLD HEADQUARTERS
SALES AND SUPPORT
STANLEY ASSEMBLY TECHNOLOGIES AMERICAS/ASIA-PACIFIC
5335 Avion Park Drive
EMHART TEKNOLOGIES
Cleveland, Ohio 44143-2328
STANLEY ASSEMBLY TECHNOLOGIES
USA Tel: +1 (440) 461-5500
Fax: +1 (440) 461-5592
SATinfo@stanleyworks.com
WEB ADDRESS
www.StanleyAssembly.com
49201 Gratiot Avenue
Chesterfield, MI 48051, USA
Tel: +1 (586) 949-0440 ext. 720
Fax: +1 (586) 949-0443
SATinfo@sbdinc.com
EBTools 0512 - Enu
©2012 Stanley Black and Decker, Inc., All Rights Reserved
Range of Controllers that
can manage up to 24 tools
EB Tools
Industry Leading Power to Weight Ratio
New High Speed Gearing
Quieter and Cooler Running
Durable Motor Cover
New Grease Fitting Location
• High/Low/OK Lights indicate fastening status with 360° viewing.
• Multifunction button can select from 2 job setups and other
process functions.
A non-contact optical switch under
the start lever increases MTBF by
eliminating mechanical or magnetic
switches which wear out over time.
Levers can easily change in
the plant to Forward Facing
with an optional accessory.
Cable attachment improves
starting, insertion, alignment,
and locking of cable nut.
FLUSH ANGLE
Flush angle tools can
access vertical spaces
50% lower than
standard angle tools.
Increased lever length, recessed
mounting, and “flush to handle” activation
improves fit to the operator’s hand.
Recessed multifunction button
requires minimal pressure with
tactile feedback. A raised ring
prevents accidental activation.
Clear cover protects multifunction panel and model number label.
CROWFOOT
Crowfoot nutrunners have
a range of sizes and torque
levels to access fasteners
in unique, hard to reach
applications.
EB55LA
LA Tools
EB34LA
EB12LA
200 Nm
1
2
100 Nm
200 Nm
400 Nm
1000 Nm
2000 Nm
400 Nm
7
EB
Tools
Range of Tool Configurations Fit the Application
New Transducer Gives Higher
Precision Throughout the
Range of the Tool
Lighter Motor Increases
Power to Weight Ratio
STRAIGHT
Straight and pistol
handle tools fit
applications with
direct access to the
fastener.
EB55LB
ANGLE
Angle tools can acess
fasteners in spaces not
accessible to straight tools.
EB12LB
1
100 Nm
200 Nm
400 Nm
1000 Nm
High-Flex Cabling Minimizes Downtime
• High-Flex tool cables reduce life cycle cost by minimizing downtime
from cable failures.
• Cable connectors combine the advantages of MIL-SPEC style connectors
and 1/4 turn bayonet connectors.
HOLD & DRIVE
Hold and drive tools simultaneously hold the
bot while the nut is tightened. A formed end
on the bolt interfaces with a mating tang or
bit to prevent bolt rotation.
Controller
Picture goes
Here
20C1073[##] Hi-Flex Lever Whip, Lite Cable
[##] = 01, 03, 05, 07 or 10 meters
20C1076[##] Hi-Flex Lever Whip, Heavy Duty Cable
[##] = 01, 03, 05, 07 or 10 meters
TUBENUT
20C1078[##] 90 Degree
Jamnut Extension
[##] = 05, 10,
20 or 40 meters
Tubenut nutrunners have open sockets
that enable the tool end to be put over
a tube, hose, or other tubular
connection to secure a fitting.
0
100 Nm
20C1075[##] Jamnut
Extension [##] = 05, 10,
20 or 40 meters
20C1077[##] 90° Hi-Flex Lever Whip
[##] = 01, 03, 05, 07 or 10 meters
6
See Page 4
3
EB Tools
Fixtured Models Include Higher
Speeds and OK-NOK Lights
Faster, Quieter and Cooler Pistol
Models to 470 Nm
• Intelligently positioned status lights and
programmable buttons improve
operator effectiveness.
• Top or bottom tool cable
exit options fit the
ergonomics of the
application.
Brilliant headlights
illuminate low
light fastener
access points.
OK-NOK Lights Alert
Operator to Fastening Status
• High/Low/OK Lights indicate fastening status with 360° viewing.
• Multifunction button can select from 2 job setups and other
process functions.
• Fixtured tools now utilize the same MFP as Handheld
EB45PB
EB02PB
1
100 Nm
200 Nm
400 Nm
STRAIGHT 3-2000 Nm
Extension Cabling Compatible with All Tool Types
20C1094[##] Hi-Flex 90 Degree Whip
[##] = 01, 03, 05, 07 or 10 meters
OFFSET 2-290 Nm
20C1093[##] Hi-Flex Whip
[##] = 01, 03, 05, 07 or 10 meters
4
Controllers enable
multiple spindle
operation including
synchronization.
5
EB Tools
Fixtured Models Include Higher
Speeds and OK-NOK Lights
Faster, Quieter and Cooler Pistol
Models to 470 Nm
• Intelligently positioned status lights and
programmable buttons improve
operator effectiveness.
• Top or bottom tool cable
exit options fit the
ergonomics of the
application.
Brilliant headlights
illuminate low
light fastener
access points.
OK-NOK Lights Alert
Operator to Fastening Status
• High/Low/OK Lights indicate fastening status with 360° viewing.
• Multifunction button can select from 2 job setups and other
process functions.
• Fixtured tools now utilize the same MFP as Handheld
EB45PB
EB02PB
1
100 Nm
200 Nm
400 Nm
STRAIGHT 3-2000 Nm
Extension Cabling Compatible with All Tool Types
20C1094[##] Hi-Flex 90 Degree Whip
[##] = 01, 03, 05, 07 or 10 meters
OFFSET 2-290 Nm
20C1093[##] Hi-Flex Whip
[##] = 01, 03, 05, 07 or 10 meters
Controllers enable
multiple spindle
operation including
synchronization.
4
5
EB
Tools
Range of Tool Configurations Fit the Application
New Transducer Gives Higher
Precision Throughout the
Range of the Tool
Lighter Motor Increases
Power to Weight Ratio
STRAIGHT
Straight and pistol
handle tools fit
applications with
direct access to the
fastener.
EB55LB
ANGLE
Angle tools can acess
fasteners in spaces not
accessible to straight tools.
EB12LB
1
100 Nm
200 Nm
400 Nm
1000 Nm
High-Flex Cabling Minimizes Downtime
• High-Flex tool cables reduce life cycle cost by minimizing downtime
from cable failures.
• Cable connectors combine the advantages of MIL-SPEC style connectors
and 1/4 turn bayonet connectors.
HOLD & DRIVE
Hold and drive tools simultaneously hold the
bot while the nut is tightened. A formed end
on the bolt interfaces with a mating tang or
bit to prevent bolt rotation.
Controller
Picture goes
Here
20C1073[##] Hi-Flex Lever Whip, Lite Cable
[##] = 01, 03, 05, 07 or 10 meters
20C1076[##] Hi-Flex Lever Whip, Heavy Duty Cable
[##] = 01, 03, 05, 07 or 10 meters
TUBENUT
20C1078[##] 90 Degree
Jamnut Extension
[##] = 05, 10,
20 or 40 meters
Tubenut nutrunners have open sockets
that enable the tool end to be put over
a tube, hose, or other tubular
connection to secure a fitting.
0
100 Nm
20C1075[##] Jamnut
Extension [##] = 05, 10,
20 or 40 meters
20C1077[##] 90° Hi-Flex Lever Whip
[##] = 01, 03, 05, 07 or 10 meters
6
See Page 4
3
EB Tools
Industry Leading Power to Weight Ratio
New High Speed Gearing
Quieter and Cooler Running
Durable Motor Cover
New Grease Fitting Location
• High/Low/OK Lights indicate fastening status with 360° viewing.
• Multifunction button can select from 2 job setups and other
process functions.
A non-contact optical switch under
the start lever increases MTBF by
eliminating mechanical or magnetic
switches which wear out over time.
Levers can easily change in
the plant to Forward Facing
with an optional accessory.
Cable attachment improves
starting, insertion, alignment,
and locking of cable nut.
FLUSH ANGLE
Flush angle tools can
access vertical spaces
50% lower than
standard angle tools.
Increased lever length, recessed
mounting, and “flush to handle” activation
improves fit to the operator’s hand.
Recessed multifunction button
requires minimal pressure with
tactile feedback. A raised ring
prevents accidental activation.
Clear cover protects multifunction panel and model number label.
CROWFOOT
Crowfoot nutrunners have
a range of sizes and torque
levels to access fasteners
in unique, hard to reach
applications.
EB55LA
LA Tools
EB34LA
EB12LA
200 Nm
1
2
100 Nm
200 Nm
400 Nm
1000 Nm
2000 Nm
400 Nm
7
EB Tools
Deliver Value Over the Life Cycle of Use
Return on Investment (ROI)
EB Tools can improve ROI in a new assembly process by providing a lower overall life cycle
cost as compared to pneumatic and other DC electric tool solutions. When comparing tooling
solutions, it is important to look at the Total Cost of Ownership, which includes operating
costs as well as up-front acquisition costs.
Higher MTBF = Fewer Failures
Long life components significantly reduce frequency of repairs. The doubleshielded ball bearings and integral temperature monitor make EB tools more
Mean Time Between Failures reliable. A non-contact optical switch under the start lever eliminates
mechanical or magnetic switches which wear out over time.
Higher MTTR = Faster Repairs
Unlike other DC electric tools, EB Tools from Stanley are manufactured with modular
construction, making them less complex and less costly to repair.
Mean Time To Repair
Modularity
Common modular controllers and tool components,
within the EB Line, allow a manufacturer to draw on
a smaller inventory of interchangeable parts to
maintain a production line of any size or complexity.
Other DC electric systems require more unique
controller and tool components.
Ergonomics
QPM ATC prevents sudden downshifting, which
can reduce operator fatigue, and torque reaction
impulse as compared to other DC electric tools.
Soft stop feature prevents sudden change in
torque reaction to the operator.
EB Tools
Full Line of Tools: Hand Held
and Fixtured to 2000 Nm
Assembly Technologies
• Industry Leading Power to Weight Ratio
• Higher Speed and Precision
• Wide Range of Tool Configurations Fit the Application
WORLD HEADQUARTERS
SALES AND SUPPORT
STANLEY ASSEMBLY TECHNOLOGIES AMERICAS/ASIA-PACIFIC
5335 Avion Park Drive
EMHART TEKNOLOGIES
Cleveland, Ohio 44143-2328
STANLEY ASSEMBLY TECHNOLOGIES
USA Tel: +1 (440) 461-5500
Fax: +1 (440) 461-5592
SATinfo@stanleyworks.com
WEB ADDRESS
www.StanleyAssembly.com
49201 Gratiot Avenue
Chesterfield, MI 48051, USA
Tel: +1 (586) 949-0440 ext. 720
Fax: +1 (586) 949-0443
SATinfo@sbdinc.com
EBTools 0612 - Enu
©2012 Stanley Black and Decker, Inc., All Rights Reserved
Range of Controllers that
can manage up to 24 tools