System3 - Safety Systems and Signs Hawaii, Inc.

Traffic Control Signs - Roll - Up Signs
System3
Du
T
wit
WindMaster 4814 series
•
Consists of these 3 parts ordered seperately
1. Crossbracing with 3, 2, or no warning flags
[2008]
•
SIGN BRACE 36”DLX0................................ Brace for 36” DuraLatch signs, no flags
SIGN BRACE 36”DLX2................................ Brace for 36” DuraLatch signs, 2 flags
SIGN BRACE 36”DLX3................................ Brace for 36” DuraLatch signs, 3 flags
SIGN BRACE 48”DLX0................................ Brace for 48” DuraLatch signs, no flags
SIGN BRACE 48”DLX2................................ Brace for 48” DuraLatch signs, 2 flags
SIGN BRACE 48”DLX3................................ Brace for 48” DuraLatch signs, 3 flags
•
•
2. D
uraLatch® roll-up sign face with self-adjusting
fasteners
See page 48 for choice of roll-up signs
3. W
indMaster® signholder with drop-&-kick upright &
kickrelease legs
[2009]
Only 27½ pounds
complete
SSIGNSTAND-P4814DLK..................WindMaster folding compact stand with drop,
lock, and kick
Kick-release legs:
A simple kick to the
locking pin releases the
leg. No more bending over
or removing work gloves to
deploy temporary signage.
The worker remains upright
with an eye on traffic. Legs
are individually adjustable
to assure level seating on
curbs and uneven terrain.
Quick Set up:
Our durable sign stands
are easy to set up by 1
person, without the use of
tools, inless than a minute
Lightweight and
compact:
The 4814DLK with a
48” sign weighs only 27½
pounds, and stores in less
than 1-cu.-ft. of space when
folded up.
Adjusts for terrain
Signholder legs are
adjustable for level, stable
seating using two or three
position leg-lock pins.
SSIGNSTAND-P4814DLK
2008BSCATpgs011-058.indd46
Brandy Signs Inc.
•
•
This new feature
automatically loks the sign
in place thanks to a self
loaded, self-engaging pin.
The mokded cap channels
the crossbrace into the
upright, while a weldied stop
insures that the sign meets
the 12” height rquirement.
•
•
Drop & Lock:
46
W
(808) 848-2421
Replacement parts
Field-replaceable parts
are readily available,
keeping your original
equipment in good
working condition.
www.BrandySigns.com
3/24/20081:43:46PM
•
•
•
B
Roll - Up Signs - Traffic Control Signs
DuraLatch:
Specs.
The DuraLatch sign-face attaches to the crossbracing
with high-strength rubber latches.
4860
4818
Deployed Ht................................................................ 11’2”........................ 7’3”
Sign Ht........................................................................ 5’............................. 1’6”
(distance of 48”sign from ground)
Net Wt.45 lbs.............................................................. 32 lbs.
•Keeps face taut and readable because the latches
continuously compensates for thermal expansion.
•Absorbs stress caused by gusting winds and passing rigs.
•Will not disengage in back-winds, like corner-pocket signs.
•Quick & easy setup - the staps simply wrap around the
crossbracing and snap onto solid tip posts.
ds
SBRACKET-SA10001
(for roll-up style sign)
Roll-Up Sign Bracket:
This bracket will
accommodate any
diamond-shaped rollup sign with standard
1¼ wide fiberglass
crossbracing.
e
e
SBRACKET-SA01729
(for rigid style sign)
WindMaster® 4860 and 4818 series:
•Designed to hold both rigid and roll-up signs
•Folds for easy handling and convenient storage
•Accomodates roll-up and rigid sign brackets, and flasher
brackets
•Accomodates sign sizes up to 48” in size
•The legs and uprights re made of aircraft-aluminum
alloy. Legs include rubber leg caps for traction
•The 4860 and 4818 models feature and adjustable
three-position leg-lock pin
•Use: SBRACKET-SA01729 to accomodate rigid signs
using the 4860 and 4818 WindMaster sign stand
Brandy Signs Inc.
2008BSCATpgs011-058.indd47
(808) 848-2421
www.BrandySigns.com
47
3/24/20081:43:47PM
Traffic Control Signs - Roll - Up Signs
Roll-Up Signs Accessories
DuraLatch®
Crossbraces are made of pultruded fiberglass, flags Fluorescent orange vinyl sheet with polyester scrim; bolted
to fiberglass staffs.
The only self-adjusting roll-up sign
CrossbracingFlag
sizeSign Type
SIGN BRACE 36”3F.................Brace SA03592........... 3..............36”....... Velcro
SIGN BRACE 36”DLX1............Brace DLX03630......... 0..............36”....... DuraLatch
SIGN BRACE 36”DLX2............Brace DLX03626......... 2..............36”....... DuraLatch
SIGN BRACE 36”DLX3............Brace DLX03592......... 3..............36”....... DuraLatch
SIGN BRACE 48”.....................Brace SA03628........... 2..............48”....... Velcro
SIGN BRACE 48”3F.................Brace SA03593........... 3..............48”....... Velcro
SIGN BRACE 48”DLX0............Brace DLX03631......... none........48”....... DuraLatch
SIGN BRACE 48”DLX2............Brace DLX03628......... 2..............48”....... DuraLatch
SIGN BRACE 48”DLX3............Brace DLX03593......... 3..............48”....... DuraLatch
flags & flags staffs
Du
The DuraLatch sign-face attaches to the crossbracing
with high-strength rubber latches.
•K eep face taut and readable because the latches
continuously compensate for tyhermal expansion
and contraction
•Absorbs stress caused by gusting winds and passing rigs.
F
F
•Will not disengage in back-winds, like corner-pocket signs.
•Quick & easy setup. The straps simply wrap around the
crossbracing and snap onto solid-tip posts.
[2009]
SFLAG-SA05679......................18”X18” flag, mast, nut & bolt for System 3
SFLAGSTAFF-SA03470..........Replacement flag for 48” System 3
SFLAGSTAFF-SA04308..........Replacement flag for 36” System 3
SFLAGHOLDER-P01574.........Flag holder only, no post for 4818 and 4860 [2008]
Windmaster sign stands
SRF
[2009]
SSIGNSTAND-P4814DLK.......WindMaster folding compact stand with drop, lock,
and kick
SSIGNSTAND-P4818..............WindMaster folding compact stand, for signs30”- 48”,
max. height is 55”
SSIGNSTAND-P4818NL..........WindMaster stand without legs, for median, use with
bracket SA10436
SSIGNSTAND-P4860..............WindMaster folding compact stands, for signs 30”
- 48”, max. height 102”
STEELmaster sign stands
[2009]
SSIGNSTAND-5018KC............WindMaster Breakaway signholder, 36” - 48” signs
SSIGNSTAND-5018KC-3.........WindMaster Breakaway signholder, 36” - 48” signs,
rig/roll bracket
Windmaster cases & bags
[2008]
SLFX-C48.................................Case for 48”X48” roll-up signs, fluorescent red orange
SSIGNSTAND BAG..................Signstand bag for 4814 stand
SSTORAGEBAG DBL..............Roll-up bag for 36”/48” Reg./Sys3 signs
SSTORAGEBAG SNGL...........Roll-up bag for 36”/48” Reg./Sys3 signs
windmaster & STEELmaster Ribs
[2008]
SFLX-RIB30.............................Ribs for 30”X30” flexible signs, #MB-30
SFLX-RIB36.............................Ribs for 36”X36” flexible signs, #MB-36
SFLX-RIB48.............................Ribs for 48”X48” flexible signs, #MB-48
windmaster & STEELmaster accessories
[2009]
SBRACKET-PO2010................Truck mount bracket for signstand 4818, 4860
SBRACKET-SA01729..............Rigid Sign bracket for signstand 4818, 4860
SBRACKET-SA10001..............Roll-up sign bracket, for signs w/o built in clamps
SBRACKET-SA03322..............Truck mount bracket for signstand holder for 4818
SBRACKET-SA10436..............Median barrier bracket, which holds sign stand
4814NL (no legs)
SCROSSBRACE-FEET............Rubber leg cap for 48” crossbrace
SSIGNSTAND-FEET................Rubber leg cap for 4818, 4860
SSIGNSTAND-P4818NL..........WindMaster stand w/o legs, for median, use with
bracket (SBRACKET-SA10436)
SSIGNSTAND-P01877............Leg pin for 4818
SSIGNSTAND-P02448............Flat spring for leg pin for 4818
SSIGNSTAND-SA01974..........Hardware leg kit for 4818
SSIGNSTAND-SA01975..........Hardware leg kit for the upright 4818
SSIGNSTAND SPRINGS.........Springs for signstands with 2 bolts)
High-visibility faces
•Retroreflective sign-face legends are constructed of
UV-stabalized vinyl microprism sheets, heat-sealed to
heavy-duty vinyl-coated fabric.
DURALATCH REFLECTIVE SIGNS
[2008]
SRFLX-CW20-5RD 48 DL............. [Right Lane] Closed Ahead, with patch, 48X48
SRFLX-CW20-5RD48DL P........... [Right] Lane Closed [Ahead], with patch, 48X48
SRFLX-DETOURAHD36DL.......... Detour Ahead, reflective, 36X36
SRFLX-DETOURAHD48DL.......... Detour Ahead, reflective, 48X48
SRFLX-ENDCONS24X60DL......... End Construction, with brace, 24X60
SRFLX-ENDRDWK24X48DL........ End Road Work, with cross brace, 24X48
SRFLX-FLAGMANPCT48DL........ Flagger pictorial, 48X48
SRFLX-FLAGMANPCT36DL........ Flagger pictorial, 36X36
SRFLX-LFLNECLSD36DL............ Left Lane Closed Ahead, 36X36
SRFLX-LFTLNECLSD48DL.......... Left Lane Closed Ahead, 48X48
SRFLX-MERGLTSYM48DL.......... Merge Left, symbol, 48X48
SRFLX-MERGRTSYM48DL.......... Merge Right, symbol, 48X48
SRFLX-ONELANEAHD36DL........ One Lane Road Ahead, 36X36
SRFLX-ONELANEAHD48DL........ One Lane Road Ahead, 48X48
SRFLX-PREPARESTP36DL......... Be Prepared To Stop, 36X36
SRFLX-PREPARESTP48DL......... Be Prepared To Stop, 48X48
SRFLX-RDCONAHD48DL P......... Road Const. [Ahead], with patch, 48X48
SRFLX-RDWRKAHD48 DLS......... [Road] Work Ahead, with patch for 48X48
SRFLX-ROADCLSD48”DLW........ Road Closed Local Traffic, with brace, wht, 48X48
SRFLX-ROADCONSTAHEAD...... Road Construction Ahead, 48X48
SRFLX-ROADWORKAD36DL...... Road Work Ahead, 36X36
SRFLX-ROADWRKAHD48DL....... Road Work Ahead, 48X48
SRFLX-RTLNECLSD48DL............ Right Lane Closed Ahead, 48X48
SRFLX-SHOULDRAHD36DL........ Shoulder Work Ahead, 48X48
SRFLX-SHOULDRAHD48DL........ Shoulder Work Ahead, 48X48
SRFLX-UTILITYWRK36DL........... Utility Work Ahead, 36X36
SRFLX-UTILITYWRK48DL........... Utility Work Ahead, 48X48
SRFLX-WORKAREAHD48DL....... Work Area Ahead, 48X48
SRFLX-WORKERSAHD36DL....... Workers Ahead, 36X36
SRFLX-WORKERSAHD48DL....... Workers Ahead, 48X48
SRFLX-WRKRSYMBL 48DL......... Worker symbol, 48X48
overlays
S
S
W
Ov
(2
[2008]
SRFLX-1000/1500 48.................... 1000/1500, overlay
SRFLX-LEFT 48............................ Left, overlay for 48” sign
SRFLX-MERGEARROW48DL...... Merge sign w/flip arrow patch left/right
SRFLX-SHOULDER 48................. Shoulder, overlay for 48” sign
overlay ACCESSORIES
[2008]
SRFLX-VELCRO KIT.................... Kit enables 48” signs to accommodate overlays
48
2008BSCATpgs011-058.indd48
Brandy Signs Inc.
(808) 848-2421
www.BrandySigns.com
3/24/20081:43:47PM
M
B
Roll - Up Signs - Traffic Control Signs
Duralatch Reflective Signs
[2008]
ng
es
on
gs.
SRFLXFLAGMANPIC36DL
FLAGMANPCT48DL
(DURALATCH)
SRFLXMERGRTSYM48DL
(MERGE RIGHT)
SRFLXMERGLTSYM48DL
(MERGE LEFT)
SRFLX-WRKRSYMBL 48DL
(DURALATCH)
SRFLXDETOURAHD36DL
DETOURAHD48DL
(DURALATCH)
SRFLXONELANEAHD36DL
ONELANEAHD48DL
(DURALATCH)
SRFLX-RTLNECLSD48DL
(DURALATCH)
SRFLX-CW20-5RD 48 DL
(DURALATCH)
SRFLX-CW20-5RD48DL P
(DURALATCH)
SRFLX-LFLNECLSD36DL
SRFLX-LFTLNECLSD48DL
(DURALATCH)
SRFLXONELANEAHD36DL
ONELANEAHD48DL
(DURALATCH)
SRFLXUTILITYWRK36DL
UTILITYWRK48DL
(DURALATCH)
SRFLXSHOULDRAHD36DL
SHOULDRAHD48DL
(DURALATCH)
SRFLXROADWORKAD36DL
ROADWRKAHD48DL
(DURALATCH)
SRFLXRDWRKAHD48 DLS
(DURALATCH WITH
PATCH)
SRFLXWORKERSAHD36DL
WORKERSAHD48DL
(DURALATCH)
SRFLXROADCONSTAHEAD
(VELCRO)
SRFLXRDCONAHD48DL P
(DURALATCH WITH
PATCH)
SRFLXWORKAREAHD48DL
(DURALATCH)
SRFLXENDCONS24X60DL
(WITH CROSS BRACING)
SRFLXENDRDWK24X48DL
(WITH CROSS BRACING)
SRFLXROADCLSD48”DLW
(DURALATCH)
ns.
he
of
to
08]
8
X48
Overlays
[2008]
SRFLXLEFT/CENTER 36
LEFT/CENTER 48
(2 SIDED OVERLAY)
SRFLX__/250 36
(2 SIDED OVERLAY)
SRFLX__/500 36
__/500 48
(2 SIDED OVERLAY)
SRFLXMERGEARROW48DL
SRFLX-LEFT 48
SRFLX-SHOULDER 48
SRFLX1000/1500 48S
(2 SIDED OVERLAY)
08]
08]
s
Brandy Signs Inc.
2008BSCATpgs011-058.indd49
(808) 848-2421
www.BrandySigns.com
49
3/24/20081:43:47PM