86a-100 series - Apollo Valves

86A-100 SERIES
3-Piece Full Port Stainless Steel 1500 CWP NPT Ball Valve
Standard Compliance - Valve Design: MSS SP-110, NACE MR0175 (2000) & MR0103 (2012)
End Connections: NPT per ASME B1.20.1 Valve Marking: MSS SP-25 Production Testing: MSS SP-110
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
3-Piece construction w/ enclosed fasteners
Full port
Stainless steel trim & hardware
Swing-out center section Pressure balanced solid ball Compression controlled RPTFE gaskets
Anti-blowout one piece bottom entry stem Two-position locking
Adjustable multi-piece PTFE “V” style packing
Fully machined ISO 5211 mounting
Cast bosses on the center-section and end caps for bleed &
drain ports
Vacuum service to 29 in of Hg.
150 psig saturated steam
OPTIONS AVAILABLE:
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART
Body
End Caps
Ball
Stem
Seat
Packing
Stem Bearing
Body Gasket
Body Bolts
Body Nuts
Stop Bolts
Gland Bolts
Handle Nut/Screw
Packing Gland
Gland Plate
Lever Handle
Lock Plate
Stops
(More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
OPTION
SIZES
-01
Standard Configuration
All
-P-01BSPP (Parallel) Thread Connection
1/4” to 2”
-T-01BSPT (Tapered) Thread Connection
1/4” to 2”
-042.25” Stem Extension (Carbon Steel, Zinc Plated) 1/4” to 2”
-14Vented Ball
1/4” to 2”
-15Round Handle
1/4” to 2”
-49No Lubrication. Assembled Dry.
1/4” to 2”
-57Cleaned for Oxygen Service
1/4” to 2”
-60Static Grounding
1/4” to 2”
-62Center Section Only
1/4” to 2”
-63NPT x Socketweld
1/4” to 2”
-69Drilled & Tapped Purge & Drains
1/4” to 2”
-704” Extended Bonnet
1/4” to 2”
-76Live Loaded (Lever Operated)
1/4” to 2”
-77Live Loaded (Actuated)
1/4” to 2”
-90Double Packed 4” Extended Bonnet
1/4” to 2”
-9PDouble Packed 4” Extended Bonnet w/ Monitoring Port 1/4” to 2”
-KFPCTFE Stem Bearing
1/4” to 2”
-SRSpring Return Handle
1/4” to 1”
MATERIAL
ASTM A351-CF8M
ASTM A351-CF3M
ASTM A276-316SS
ASTM A276-316SS
Multi-Seal
PTFE
PEEK/PTFE
RPTFE
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
18-8 Stainless Steel
300 Series Stainless Steel
ASTM A276-316SS
300 Series Stainless Steel
300 Series Stainless Steel
300 Series Stainless Steel
300 Series Stainless Steel
FOR PRESSURE/TEMPERATURE RATINGS, REFER TO PAGE M-19, GRAPH NO. 24
PRODUCT
NUMBER
86A-101-01
86A-102-01
86A-103-01
86A-104-01
86A-105-01
86A-106-01
86A-107-01
86A-108-01
SIZE
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
A
B
C
D
E
F
G
H
J
K
0.37
0.50
0.50
0.75
1.00
1.50
1.50
2.00
2.80
2.80
2.80
3.68
4.19
4.50
4.98
5.86
0.89
0.89
0.89
1.10
1.31
1.97
1.97
2.56
5.12
5.12
5.12
5.53
6.53
6.65
6.65
8.40
3.02
3.02
3.02
3.40
4.80
4.70
4.70
5.47
2.02
2.02
2.02
2.40
2.67
3.84
3.84
4.56
1.01
1.01
1.01
1.20
1.34
1.92
1.92
2.46
1.39
1.39
1.39
1.65
1.80
2.49
2.49
3.17
1.97
1.97
1.97
2.35
2.80
3.89
3.89
4.74
0.23
0.23
0.23
0.24
0.48
0.72
0.72
0.80
L
M
N
P
0.245
0.245
0.245
0.312
0.287
0.412
0.412
0.477
0.375
0.375
0.375
0.500
0.500
0.625
0.625
0.750
1.00
1.00
1.00
1.392
1.392
1.949
1.949
1.949
10-24
10-24
10-24
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
WT.
REV. 12APR16
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
2.3
2.3
2.3
4.0
5.7
14.2
14.4
24.4
B-25
FLOW DATA
For Apollo® Ball Valves
The listed Cv “factors” are derived from actual flow testing, in the Apollo® Ball Valve Division, Conbraco Industries, Inc., Pageland, South Carolina.
These tests were completed using standard “off the shelf” valves with no special preparation and utilizing standard schedule 40 pipe. It should
be understood that these factors are for the valve only and also include the connection configuration. The flow testing is done utilizing water
as a fluid media and is a direct statement of the gallons of water flowed per minute with a 1 psig pressure differential across the valve/
connection unit. Line pressure is not a factor. Because the Cv is a factor, the formula can be used to estimate flow of most media for valve sizing.
FLOW OF LIQUID
Q = CV
√
FLOW OF GAS
∆P
SpGr
2
(Q)
(SpGr)
or ∆P =
(Cv)2
Where:
Q =
ΔP =
SpGr =
Cv =
Q = 1360 CV
√
(∆P) (P2)
(SpGr) (T)
-7
2
5.4
x
10
(SpGr)
(T)
(Q)
or ∆P =
(Cv)2 (P2)
Where:
Q =
ΔP =
SpGr =
P2 =
T =
Cv =
flow in US gpm
pressure drop (psig)
specific gravity at flowing temperature
valve constant
flow in SCFH
pressure drop (psig)
specific gravity (based on air = 1.0)
outlet pressure–psia (psig + 14.7)
(temp. °F + 460)
valve constant
CAUTION: The gas equation shown, is valid at very low pressure drop ratios.
The gas equation is NOT valid when the ratio of pressure drop (ΔP) to inlet
pressure (P1) exceeds 0.02.
NOTE: Only use the gas equation shown if (P1-P2)/P1 is less than 0.02.
Cv FACTORS FOR APOLLO VALVES
VALVE
70B-140 Series
70-100/200 Series
70-300/400 Series
70-600 Series
70-800 Series
71-AR Series
71-100/200 Series
72-100/900 Series
73A-100 Series
73-300/400 Series
74-100 Series
75-100 Series
76-AR Series
76F-100 Series
76FJ-100 Series
76FK-100 Series
76-100 Series
76-300/400 Series
76-600 Series
76J-100 Series
76J-AR Series
76K-100 Series
76K-AR Series
7K-100 Series
77-AR Series
77C-100/200 Series
77D-140 Series
1/4
8.4
8.4
-2.3
8.4
---8.4
-8.4
8.4
8.4
8.1
8.1
8.1
8.4
-2.3
8.4
8.4
8.4
8.4
-8.1
4.5
4.5
3/8
7.2
7.2
-4.5
7.2
---7.2
-7.2
7.2
7.2
15
15
15
7.2
-4.5
7.2
7.2
7.2
7.2
-15
7.2
7.2
1/2
15
15
15
5.4
15
--26
15
26
15
15
15
15
15
15
15
26
5.4
15
15
15
15
15
15
16
16
3/4
30
30
30
12
30
30
30
48
30
48
30
30
30
51
51
51
30
48
12
30
30
30
30
51
51
36
36
1
43
43
43
14
43
43
43
65
43
65
43
43
43
68
68
68
43
65
14
43
43
43
43
68
68
68
68
1.25
48
48
48
21
48
48
48
125
48
125
48
48
48
125
125
125
48
125
21
48
48
48
48
125
125
125
125
1.5
84
84
84
34
84
84
84
170
84
170
84
84
84
177
177
177
84
170
34
84
84
84
84
177
177
177
177
SIZE (IN.)
2
108
108
108­
47
-108
108
216
108
216
108
108
108
389
389
389
108
216
47
108
108
108
108
389
389
389
389
2.5
190
190
---190
190
---190
190
190
---190
--190
190
190
190
503
-503
--
3
370
370
---370
370
---370
370
370
---370
--370
370
370
370
-----
4
670
670
--------670
670
670
-------670
-670
-----
6
----------------------------
8
----------------------------
10
----------------------------
12
-----------------------------
continued on next page
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
M-3
FLOW DATA
For Apollo® Ball Valves
Cv FACTORS FOR APOLLO VALVES (continued from M-3)
VALVE
77D-640 Series
77G-UL Series
77W Series
77-100/200 Series
79 Series
80 Series
82-100/200 Series
83A/83B Series
83R-100/200 Series
86A/86B Series
86R-100/200 Series
87A-100 Series
87A-200 Series
87A-700 Series
87A-900 Series
87A-F00 Series
87B-100 Series
87J-100 Series
87J-200 Series
87J-700 Series
87J-900 Series
87K-100 Series
87K-200 Series
87K-700 Series
87K-900 Series
88A-100 Series
88A-200 Series
88A-700 Series
88A-900 Series
88A-F00 Series
88B-100 Series
89-100 Series
9A-100 Series
90-100 Series
92-100 Series
93-100 Series
94A-100/200 Series
96-100 Series
399-100 Series
489-100 Series
M-4
1/4
-4.5
-8.1
8.5
8.4
8.1
8.1
-8.1
---------------------8.4
8.3
8.3
8.3
8.3
6
8.3
8.4
8.4
3/8
-7.2
-15
8.5
7.2
14
14
-14
---------------------7.2
6.7
6.7
6.7
6.7
7
6.7
7.2
7.2
1/2
-16
16
15
9.8
15
26
26
-26
--15
-15
---15
-15
-15
-15
-15
-15
--15
5.7
5.7
5.7
5.7
19
5.7
15
15
3/4
11
36
36
51
32
30
51
51
-51
--19
-19
---19
-19
-19
-19
-19
-19
--30
10
10
10
10
34
10
30
30
1
24
68
68
68
44
43
68
68
-68
--75
-75
75
--75
-75
-75
-75
-75
-75
75
-43
16
16
16
16
50
16
43
43
1.25
35
125
125
125
66
48
120
120
-120
---------------------48
25
25
25
25
104
25
48
48
1.5
-177
177
177
148
84
170
170
170
170
170
86
195
86
195
195
-86
195
86
195
86
195
86
195
86
195
86
195
195
-84
40
40
40
40
268
40
84
84
SIZE (IN.)
2
-389
389
389
218
108
376
376
376
376
376
104
410
104
410
410
-104
410
104
410
104
410
104
410
104
410
104
410
410
-108
62
62
62
62
309
62
108
108
www.apollovalves.com
2.5
-503
-503
440
190
510
----234
545
234
545
545
-234
545
234
545
234
545
234
545
234
545
234
545
545
-190
----629
-190
190
3
----390
370
996
-996
-996
375
1021
375
1021
1021
375
375
1021
375
1021
375
1021
375
1021
375
1021
375
1021
1021
375
370
----1018
-370
370
4
------1893
-1893
-1893
673
2016
673
2016
2016
673
673
2016
673
2016
673
2016
673
2016
673
2016
673
2016
2016
673
-----1622
----
6
-----------1099
4837
1099
4837
4837
1099
1099
4837
1099
4837
1099
4837
1099
4837
1099
4837
1099
4837
4837
1099
----------
8
-----------1902
9250
1902
9250
-1902
1902
9250
1902
9250
1902
9250
1902
9250
1902
9250
1902
9250
-1902
----------
Customer Service (704) 841-6000
10
-----------3890
15170
3890
15170
-3890
3890
15170
3890
15170
3890
15170
3890
15170
3890
15170
3890
15170
-3890
----------
12
-----
--
-------22390
-22390
---22390
-22390
-22390
-22390
-22390
-22390
------------
PRESSURE TEMPERATURE RATINGS
1500 CWP
(CS) ASTM A216-WCB
(GRAPH 23)
1500 CWP
(SS) ASTM A351-CF8M
(GRAPH 24)
Copyright ©2016 Apollo Valves, Manufactured by Conbraco Industries - Printed in the USA
M-19