LATHE CHUCKS POWER CHUCKS AND HYDRAULIC

Transcription

CONTENTS
LATHE CHUCKS
pages
09 - 94
1
POWER CHUCKS AND HYDRAULIC CYLINDERS
pages
95 - 146
2
MACHINE AND BENCH VISES
pages
147 - 194
3
MILLING FIXTURES
pages
195 - 214
4
VDI - TOOLHOLDERS
pages
215 - 242
5
7
LATHE CHUCKS
LATHE CHUCKS
9
LATHE CHUCKS
BISON-BIAL continues to manufacture our famous high
quality Standard and Precision Lathe Chucks for customers
with demanding applications around the world.
Our chucks are made from forged steel or cast iron; all of
the working surfaces are induction hardened and ground
ensuring that the finished product is a rugged chuck that
meets high sliding, stability, and durability parameters that
our customers have come to expect from BISON-BIAL.
Safety
wrench
Cover
Scroll plate
Body
Stud bolt
Pinion
Hard outside
solid jaw
Each chuck is thoroughly inspected before the product leaves the
factory. We check gripping force and run-out to ensure accuracy in
order to meet BISON-BIAL’s quality standards that are even more
stringent than DIN standards. Only then the chuck is given the BISONBIAL label of quality. This is our commitment to you that you have
purchased the best workholding products on the market today.
10
LATHE CHUCKS
We want to give you more. So when greater precision
will be necessary you can choose the same BISON-BIAL
lathe chucks from our precision line.
Centering accuracy of BISON-BIAL standard and
precision lines are shown in the chart below in
comparison to the requirements of DIN standards.
Both our standard and precision line fall below the
required DIN standards troughout the various sizes.
Centering accuracy
DIN 6386
Standard chucks
DIN 6386
Precision chucks
Standard line
(3500, 3200)
Precision line
(3500-I)
Chuck size
For high precision operations we recommend
the precision line of BISON-BIAL chucks. High
quality products for demanding companies.
11
LATHE CHUCKS - CONTENTS
Precision self-centering scroll chucks
3 jaw
Body
Type
Page
DIN 6350
steel body
3504-I, 3505-I
19
DIN 55026
steel body
3514-I, 3515-I
20
DIN 55027
steel body
3534-I, 3535-I
21
DIN 55029
steel body
3544-I, 3545-I
22
DIN 6350 (FRONT MOUNTING)
steel body
3574-I, 3575-I
23
Type
Page
steel body
3504, 3505
24
cast iron body
3204, 3205
25
steel body
3514, 3515
26
cast iron body
3214, 3215
27
steel body
3534, 3535
28
cast iron body
3234, 3235
29
steel body
3544, 3545
30
cast iron body
3244, 3245
31
steel body
3574, 3575
32
cast iron body
3274, 3275
33
steel body
3704, 3705
34
cast iron body
3604, 3605
35
steel body
3714, 3715
36
cast iron body
3614, 3615
37
steel body
3734, 3735
38
cast iron body
3634, 3635
39
steel body
3744, 3745
40
cast iron body
3644, 3645
41
steel body
3774, 3775
42
cast iron body
3674, 3675
43
Standard self-centering scroll chucks
3 jaw
Body
DIN 6350
DIN 55026
DIN 55027
DIN 55029
4 jaw
DIN 6350
DIN 55026
DIN 55027
DIN 55029
http://www.bison-bial.com, e-mail: sales@bison-bial.com, tel.+48 (85) 741 31 86, fax +48 (85) 732 76 58
12
Standard self-centering scroll chucks
2 jaw
Body
DIN 6350
Type
Page
3105
44
steel body
3806, 3807
45
cast iron body
3804, 3805
46
cast iron body
6 jaw
DIN 6350
Self-centering chucks with fine adjustment
3 jaw
Body
Type
Page
steel body
3564, 3565
47
cast iron body
3264, 3265
48
steel body
3864, 3865
49
6 jaw
Lathe chucks for sharpening drills
Type
Page
3 jaw
3266, 3866
50
6 jaw
3867, 3868
50
Collet chucks
3911, 3960
51
3286
52
Self-centering scroll chucks for small turning diameters
13
Engineering data for self-centering scroll chucks
Gripping ranges
53
Maximum permissible rotation speeds
53
Total gripping force
54
Balance value
54
Centering accuracy
54
Spare parts for self-centering scroll chucks
Spare parts
55
Main dimensions of hard solid jaws and soft solid jaws for chucks type 3200, 3500, 3700, 3864
59
Mounting dimensions of hard master jaws for chucks type 3100, 3200, 3500, 3600, 3700, 3865
59
Mounting dimensions of top jaws for chucks type 3100, 3200, 3500, 3600, 3700, 3865
60
Lathe chucks with Morse Taper
Lathe chucks with Morse taper
Independent lathe chucks with Morse taper
Type
Page
9154, 9155, 9156,
9164, 9165
9184, 9185, 9186, 9187
61
4954, 4956
62
Self-centering and individually adjustable scroll chucks
3 jaw
Body
DIN 6350
Type
steel body
4705
cast iron body
4505
steel body
4805
cast iron body
4605
Page
63
4 jaw
DIN 6350
63
Self-centering chucks with large through-hole for pipe machining
3 jaw
Body
DIN 6350
Type
cast iron body
3295
64
steel body
3597
65
14
Page
Heavy-duty self-centering chucks with large through-hole for pipe machining
3 jaw
Body
DIN 55026
steel body
Type
Page
3515 HD
66
Heavy-duty independent chucks for pipe machining
4 jaw
Body
Type
Page
DIN 55026
steel body
4317 HD
67
DIN 55029
steel body
4347 HD
68
Type
Page
4307 HD
69
Type
Page
cast steel body
4302, 4303
70
cast iron body
4304, 4305
71
cast steel body
4312, 4313
72
cast iron body
4314, 4315
73
cast steel body
4332, 4333
74
cast iron body
4334, 4335
75
cast steel body
4342, 4343
76
cast iron body
4344, 4345
77
4317-800/15 MSP
78
Heavy-duty independent chuck
4 jaw
Body
steel body
Independent chucks
4 jaw
Body
DIN 55026
DIN 55027
DIN 55029
DIN 55026
steel body
15
Engineering data for independent chucks
Gripping ranges
79
79
Spare parts for independent chucks
81
Main dimensions of one-piece and two-piece reversible jaws
Self-centering wedge bar chucks
3 jaw
Body
Type
Page
DIN 6350
steel body
3404
82
DIN 55026
steel body
3414
82
DIN 55027
steel body
3434
82
DIN 55026
steel body
3444
82
Main dimensions of wedge bar chucks
82
Engineering data for self-centering wedge bar chucks
Gripping ranges
84
84
84
Balance value
84
Centering accuracy
84
Spare parts for self-centering wedge bar chucks
85
Adapter plates
Type
Page
Fully machined adapter plates for chucks with fine adjustment
8210, 8230, 8240
86
Semi-finished adapter plates
8212, 8232, 8242
88
Fully-finished adapter plates
8210-X, 8230-X, 8240-X
89
Machine spindle noses to DIN and ANSI standards
16
92
LATHE CHUCKS
Hardened components and
basic surfaces ground
Surfaces hardened
and ground
Type 3500, 3700 chucks
A PROVEN DESIGN (THE CUSHMAN TYPE) FOR UNIVERSAL USE BUILT IN THREE MAIN LINES
■■ Standard chucks - with cast iron body for normal use (e.g. type 3204)
■■ Precision chucks - with steel body for high precision machining; extended period of life - expectancy (e.g. type 3504-I)
■■ Precision chucks with fine adjustment - with steel body for super high precision machining (e.g. type 3864)
BODY
■■ Type 3500, 3700 chucks: drop-forged of the highest grade steel, hardened and ground
■■ Type 3200, 3600 chucks: high quality cast-iron
SCROLL PLATE
■■ Drop-forged of fine alloy steel, carburized and hardened
■■ Thread flanks ground on both sides
JAWS
■■ M
ade from fine alloy steel
■■ Teeth, guides and other working surfaces are carburized, hardened and ground
PINIONS
■■ Made from fine alloy steel, carburized, hardened and ground
All components which are important for transmitting the gripping force are of modern and compact design.
Each scroll plate and assembled precision chuck are statically balanced within fine limits.
Lathe chucks must be lubricated regulary to maintain their gripping force.
Directions are included in the operating instructions supplied with each chuck.
All chucks are equipped with grease nipples for convenient maintenance.
17
SELF-CENTERING SCROLL CHUCKS
GUIDE FOR USE OF HAND-OPERATED BISON CHUCKS,
SELF-CENTERING AND INDEPENDENT
Type
Range of application
Machining of flange-type workpieces
Bar or tubework
3500-I
3200
3600
3500
3700
3105
3264, 3265
3564, 3565
3864, 3865












Machining of parts requiring
a very high concentricity accuracy

Twist drill grinding

Gripping of parts on grinding machines


Machining of workpieces requiring
a very high speed

Measuring and inspection works

4505, 4605
4705, 4805
4300

















Normal application


Particularly suitable
Possible, with reservations
18


Machining of eccentrical parts, of assymetrical and irregularly shaped workpieces
Machining of workpieces requiring
especially high gripping force
3266, 3868
3866, 3867
PRECISION SELF-CENTERING SCROLL CHUCKS
Type 3504-I, 3505-I
3 JAWS, STEEL BODY (DIN 6350)
ø 80 - ø 400
ø 500 - ø 630
Features:
■■ 3 jaw, self-centering scroll chuck with manual gripping
■■ Steel body extends machine life while providing higher rigidity
and greater wear resistance, enabling the chuck to withstand
higher machining forces
■■ Hardened and ground working surfaces ensure longer life with
maintained accuracy and repeatability
■■ Balanced scroll plate allows higher rotation speeds without
excess vibration
■■ Mounted on the machine-tool spindle from the back of the
chuck, using the adapter plate
Application:
■■ This precision chuck, with increased gripping accuracy, is
made for very high precision machining on conventional lathes
and milling fixtures
Options:
■■ Hard solid jaws (type 3504-I) or hard two-piece jaws (type
3505-I)
■■ Chuck size: can be greater than 630 mm, but not exceeding
1000 mm
■■ Chuck design: our engineers can work with you to implement
any product design changes you may require
Chuck size A
80
100
125
160
200
250
315
400
500
630
B
B1
C
D H7
E
F
G
H
J
K
L
44
3
56
16
67
3xM6
32
13
-
50
3
70
20
83
3xM8
42
17
-
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
68
72,8
4
125
42
140
6xM10
70
32
67
43
78
82,8
4
160
55
176
6xM10
85
29
80
45
89
92,8
5
200
76
224
6xM12
105
34
95
53
96,2
101,3
5
260
103
286
3xM16
125
43
110
57
109
116,8
5
330
136
362
6xM16
145
55
127
67
119
129,8
5
420
190
458
6xM16
180
60
127
79
129
140,3
7
545
252
586
6xM16
225
70
127
87
Approx. weight [kg]
1,5
2,8
5,0
10,0
17,5
29
50
85
145,0
250,0
Type 3505-I
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3504-I
Standard
accessories
Other engineering data - see pages 53-54
1 set of soft solid
jaws
1 set of soft
top jaws
Spare parts - see pages 55-57
Example of order: 3504-250-I
19
Type 3514-I, 3515-I
*
( )
(*) Screws inside taper
type A1
Features:
Chuck size A
160
Short taper
1:4
B
B1
min.
D
max.
E
F1
G1
F
68
72,8
82,563
82,578
42
61,9
M10
-
Qty. of mounting
screws
3
G
H
J
K
L
Approx. weight
[kg]
70
32
67
43
*5
10,0
200
*5
250
*6
78
82,8
82,563
106,375
82,578
106,390
42
55
61,9
82,6
M10
M12
3
85
29
80
45
excess vibration
■■ Mounted directly to “A” type machine-tool spindles
Application:
and grinders
Options:
3515-I)
1000 mm
5
*6
82,563
82,578
76
104,8
89
92,8
106,375
106,390
55
82,6
M12
-
3
85
29
80
45
19,0
M10
105
34
95
53
315
*8
139,719
139,734
76
111,1
M16
-
6
*8
96,2
101,3
106,375 139,719
106,390 139,734
103
80
111,1
M16
133,4
-
6
105
34
95
53
400
8
32,0
M12
125
43
110
57
*11
108
116,8
139,719 196,869
139,734 196,887
136
130
165,1
M 20
171,4
-
6
105
34
95
53
500
8
55,0
M16
145
55
127
67
11
119
129,8
139,719 196,869
139,734 196,887
136
190
171,4
235
6
125
43
110
57
630
11
6
145
55
127
67
M16
180
60
127
79
92,0
15
129
140,3
196,869 285,775
196,887 285,795
252
190
235
330,2
6
M20
180
60
127
79
160,0
M20
225
70
127
87
M24
225
70
127
87
285,0
Type 3515-I
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3514-I
Standard
accessories
Example of order: 3514-250/5-I
20
1 set of soft solid
jaws
1 set of soft
top jaws
Type 3534-I, 3535-I
excess vibration
■■ Mounted directly to BAYONET type machine-tool spindles
Application:
Options:
3535-I)
1000 mm
Features:
Chuck size A
Short taper
1:4
B
B1
min.
D
max.
E
F
Qty. of mounting
screws
H
J
K
L
Approx. weight
[kg]
125
3
160
4
59,5
64,8
53,975 63,513
53,988 63,526
32
75
85
4
200
5
68
72,8
63,513 82,563
63,526 82,578
42
85
104,8
5
250
6
6
315
8
78
89
82,8
92,8
82,563 106,375 106,375 139,719
82,578 106,390 106,390 139,734
55
76
104,8
133,4
133,4
171,4
6
8
96,2
101,3
139,719
139,734
103
171,4
400
11
8
500
11
8
630
11
11
15
111,7
108
119
129
116,8
116,8
129,8
140,3
196,869 139,719 196,869 139,719 196,869 196,869 285,775
196,887 139,734 196,887 139,734 196,887 196,887 285,795
136
136
190
190
252
235
171,4
235
171,4
235
235
330,2
3
3
3
4
4
4
4
4
4
6
4
4
4
6
6
6
51
20
56
40
51
20
56
40
70
32
67
43
70
32
67
43
85
29
80
45
85
29
80
45
105
34
95
53
105
34
95
53
125
43
110
57
125
43
110
57
145
55
127
67
145
55
127
67
180
60
127
79
180
60
127
79
225
70
127
87
225
70
127
87
5,0
9,0
19,0
32,0
51,0
101,0
150,0
274,0
Type 3535-I
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3534-I
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
21
Type 3544-I, 3545-I
excess vibration
■■ Mounted directly to CAMLOCK type machine-tool spindles
Application:
Options:
3545-I)
1000 mm
Features:
Chuck size A
Short taper 1:4
B
B1
min.
D
max.
E
F
Qty. of mounting screws
H
J
K
L
Approx. weight [kg]
Chuck size A
Short taper 1:4
B
B1
min.
D
max.
E
F
H
J
K
L
Approx. weight [kg]
100
3
76
53,975
53,988
20
70,6
3
70
32
67
43
3,0
6
106,375
106,390
103
133,4
6
125
43
-
125
3
53,975
53,988
70,6
3
51
20
56
40
96,2
101,3
59,5
64,8
32
5,0
4
3
63,513
63,526
53,975
53,988
82,6
3
51
20
56
40
70,6
3
70
32
67
43
315
8
139,719
139,734
160
4
68
72,8
63,513
63,526
42
82,6
3
70
32
67
43
9,0
5
4
82,563
82,578
63,513
63,526
104,8
6
70
32
67
43
82,6
3
85
29
80
45
400
11
111,7
116,8
196,869
196,887
139,719
139,734
235
6
125
43
110
57
171,4
6
145
55
127
67
171,4
6
125
43
110
57
51,0
8
108
116,8
136
101,0
200
5
78
82,8
82,563
82,578
55
104,8
6
85
29
80
45
19,0
250
6
6
106,375
106,390
106,375
106,390
133,4
6
85
29
80
45
133,4
6
105
34
95
53
500
11
8
196,869
196,887
139,719
139,734
136
171,4
6
180
60
127
79
235
6
145
55
127
67
119
129,8
150,0
11
8
196,869
196,887
190
235
6
180
60
127
79
139,719
139,734
136
171,4
6
225
70
127
87
630
11
129
140,3
196,869
196,887
190
235
6
225
70
127
87
274,0
89
92,8
76
32,0
8
139,719
139,734
171,4
6
105
34
95
53
15
285,775
285,795
252
330,2
6
225
70
127
87
Type 3545-I
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3544-I
Standard
accessories
22
1 set of soft solid
jaws
1 set of soft
top jaws
Type 3574-I, 3575-I
3 JAWS, STEEL BODY, FRONT MOUNTING (DIN 6350)
Features:
excess vibration
■■ Flexible mounting system: mounted on machine-tool spindles
using an adapter plate and can be mounted either from the
back or the front of the chuck to the adapter plate
■■ Application:
made for very high precision machining on conventional
lathes, grinders and milling fixtures
Options:
3575-I)
1000 mm
Chuck size A
80
100
125
160
200
250
315
400
500
630
B
B1
C
D H7
E
F
G
H
J
K
L
P
44
3
56
16
67
3xM6
32
13
3xM6
50
3
70
20
83
3xM8
42
17
3xM8
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
3xM8
68
72,8
4
125
42
140
6xM10
70
32
67
43
3xM10
78
82,8
4
160
55
176
6xM10
85
29
80
45
3xM10
89
92,8
5
200
76
224
6xM12
105
34
95
53
3xM12
97,2
101,3
5
260
103
286
6xM16
125
43
110
57
3xM16
109
116,8
5
330
136
362
6xM16
145
55
127
67
3xM16
119
129,8
5
420
190
458
6xM16
180
60
127
79
3xM16
129
140,3
7
545
252
586
6xM16
225
70
127
87
3xM16
Approx. weight
[kg]
1,5
2,8
5,0
10,0
17,5
29
50
85
145,0
250,0
Type 3575-I
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3574-I
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
Example of order: 3574-250-I
23
STANDARD SELF-CENTERING SCROLL CHUCKS
Type 3504, 3505
Features:
and greater wear resistance
■■ Balanced scroll plate and chuck allows higher rotation speeds
without excess vibration
Application:
■■ This chuck is designed for all types of workshop machining
operations on conventional lathes
Options:
■■ Hard solid jaws (type 3504) or hard two-piece jaws (type 3505)
Chuck size A
80
100
125
160
200
250
315
400
B
B1
C
D H7
E
F
G
H
J
K
L
Approx. weight [kg]
44
3
56
16
67
3xM6
32
13
1,5
50
3
70
20
83
3xM8
42
17
2,8
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
5,0
68
72,8
4
125
42
140
6xM10
70
32
67
43
10,0
78
82,8
4
160
55
176
6xM10
85
29
80
45
17,5
89
92,8
5
200
76
224
6xM12
105
34
95
53
29
97,2
101,3
5
260
103
286
6xM16
125
43
110
57
50
109
116,8
5
330
136
362
6xM16
145
55
127
67
85
Type 3505
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3504
Standard
accessories
Example of order: 3504-315
24
1 set of soft solid
jaws
1 set of soft
top jaws
Type 3204, 3205
3 JAWS, CAST IRON BODY (DIN 6350)
Features:
■■ 3 jaw, self-centering scroll chuck with manual gripping, and a high
quality cast iron body
■■ Smart design, allowing inner parts to be replaced quickly
■■ Mounted on the machine-tool spindle from the back of the chuck, using
the adapter plate
Application:
■■ This chuck is designed for all types of workshop machining operations
on conventional lathes and milling fixtures
Options:
■■ Chuck design: our engineers can work with you to implement any
product design changes you may require
■■ Chuck with diameters 800 mm, 915 mm and 1000 mm are front
mounted with screws into cylindrical recess (*see lower drawing)
(*)
3204-800, 915,1000; 3205-800, 915,1000
(*)
Chuck size A
80
100
125
160
200
250
315
400
500
630
800
915
1000
B
44
50
56
64,5
75
85
94
105
120
135
159
171
171
B1
-
-
60,8
69,3
79,8
88,8
99,1
113,8
130,8
146,3
170,3
180
180
C
3
3
4
4
4
5
5
5
5
7
20
20
20
D H7
56
70
95
125
160
200
260
330
420
545
450
520
520
E
16
20
32
42
55
76
103
136
190
252
320
408
408
F
67
83
108
140
176
224
286
362
458
586
368,3
463,6
463,6
G
3xM6
3xM8
3xM8
6xM10
6xM10
6xM12
6xM16
6xM16
6xM16
6xM16
-
-
-
H
32
42
51
70
85
105
125
145
180
225
225
-
-
J
13
17
20
32
29
34
43
55
60
70
70
-
-
K
-
-
56
67
80
95
110
127
127
127
127
175
175
L
-
-
40
43
45
53
57
67
79
87
87
100
100
P
-
-
-
-
-
-
-
-
-
-
6xM24
-
6xM24
Approx. weight
[kg]
1,5
2,8
5,0
10,0
17,5
29
50
85
145,0
250,0
402
560
720
Type 3205
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3204
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
25
Type 3514, 3515
*
( )
(*) Screws inside taper type A1
Features:
Chuck size A
160
Short taper 1:4
*5
B
B1
E
F1
G1
F
68
72,8
82,563
82,578
42
61,9
M10
-
Qty. of mounting
screws
3
G
H
J
K
L
Approx. weight [kg]
70
32
67
43
10,0
min.
max.
D
excess vibration
Application:
operations on conventional lathes and grinders
Options:
200
4
*5
63,513
63,526
42
82,6
78
82,8
82,563
82,578
42
61,9
M10
-
250
*6
106,375
106,390
55
82,6
M12
-
3
M10
85
29
80
45
85
29
80
45
19,0
5
*6
82,563
82,578
76
104,8
89
92,8
106,375
106,390
55
82,6
M12
-
3
85
29
80
45
M10
105
34
95
53
315
*8
139,719
139,734
76
111,1
M16
-
6
*8
96,2
101,3
106,375
139,719
106,390
139,734
103
80
111,1
M16
133,4
-
6
105
34
95
53
32,0
400
6
8
*11
106,375
106,390
103
133,4
108
116,8
139,719
139,734
136
171,4
196,869
196,887
130
165,1
M 20
-
6
105
34
95
53
M12
125
43
110
57
6
125
43
110
57
55,0
M12
145
55
127
67
M16
145
55
127
67
92,0
145
55
127
67
Type 3515
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3514
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
Example of order: 3514-315/6
26
Type 3214, 3215
*
( )
Features:
■■ 3 jaw, self-centering, scroll chuck with manual gripping, and a high
Application:
on conventional lathes and grinders
Options:
Chuck size A
160
Short taper
1:4
B
*5
*5
81,5
91
B1
86,3
D
200
250
*6
5
95,8
315
*6
*8
400
6
*8
6
8
500
*11
630
8
11
11
800
*15
103,5
117,7
128,5
146
165
107,3
122,8
137,3
157,3
175,8
11
*15
159
1000
20
20
180
171
191,3
180
min. 82,563 82,563 106,375 82,563 106,375 139,719 106,375 139,719 106,375 139,719 196,869 139,719 196,869 196,869 285,775 196,869 285,775 412,775
412,775
max. 82,578 82,578 106,390 82,578 106,390 139,734 106,390 139,734 106,390 139,734 196,887 139,734 196,887 196,887 285,795 196,887 285,795 412,802
412,802
E
42
42
55
76
55
76
103
80
103
136
130
136
190
190
190
F1
61,9
61,9
82,6
-
82,6
111,1
-
111,1
-
-
165,1
-
-
-
-
-
G1
M10
M10
M12
-
M12
M16
-
M16
-
-
M 20
-
-
-
-
F
Qty. of
mounting
screws
G
-
-
-
104,8
-
-
133,4
-
133,4
171,4
-
171,4
235
235
330,2
3
3
3
3
-
-
-
M10
-
-
M12
-
M12
M16
-
M16
M20
M20
M24
M20
-
M24
H
70
85
85
105
105
105
125
125
145
145
145
180
180
225
225
225
225
225
-
J
32
29
29
34
34
34
43
43
55
55
55
60
60
70
70
70
70
70
-
6
6
6
6
190
320
408
247,6
-
-
-
M 24
-
-
235
-
368,3
463,6
6
6
6
M24
K
67
80
80
95
95
95
110
110
127
127
127
127
127
127
127
127
127
127
-
L
43
45
45
53
53
53
57
57
67
67
67
79
79
87
87
87
87
87
-
Approx.
weight [kg]
10,0
19,0
32,0
55,0
92,0
160,0
285,0
384,0
720
Type 3215
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3214
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
27
Type 3534, 3535
Features:
Chuck size A
Short taper
1:4
B
B1
min.
D
max.
E
F
Qty. of mounting
screws
H
J
K
L
125
3
160
4
53,975
53,988
5
5
68
72,8
63,513
63,526
63,513
63,526
85
85
32
75
200
4
59,5
64,8
excess vibration
Application:
Options:
250
6
6
106,375
106,390
89
92,8
106,375
106,390
76
133,4
78
82,8
82,563
82,578
82,563
82,578
104,8
104,8
42
55
133,4
315
8
139,719
139,734
171,4
6
8
96,2
101,3
106,375
139,719
106,390
139,734
103
133,4
171,4
400
11
111,7
116,8
196,869
196,887
235
8
11
108
116,8
139,719
196,869
139,734
196,887
136
171,4
235
3
3
3
4
4
4
4
4
4
4
6
4
6
51
20
56
40
51
20
56
40
70
32
67
43
70
32
67
43
85
29
80
45
85
29
80
45
105
34
95
53
105
34
95
53
125
43
110
57
125
43
110
57
125
43
110
57
145
55
127
67
145
55
127
67
Approx. weight
[kg]
5,0
9,0
19,0
32,0
51,0
101,0
Type 3535
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3534
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
28
Type 3234, 3235
Features:
Application:
on conventional lathes
Options:
■■ Chuck size: can be greater than 630 mm, but not exceeding 1000 mm
Chuck size A
100
Short taper
1:4
B
B1
3
D
min.
max.
E
F
H
J
K
L
Approx. weight [kg]
80
53,975
53,988
20
75
3
42
17
3,0
Chuck size A
160
4
53,975
53,988
75
3
51
20
56
40
70
74,8
32
3
53,975
53,988
63,513
63,526
85
3
51
20
56
40
75
3
70
32
67
43
85
3
70
32
67
43
5,0
6
min.
max.
E
F
H
J
K
L
Approx. weight [kg]
106,375
106,390
133,4
4
105
34
95
53
76
32,0
5
81,5
86,3
42
6
6
139,719
139,734
171,4
4
105
34
95
53
106,375
106,390
103
133,4
4
125
43
110
57
117,7
122,8
106,375
106,390
104,8
4
70
32
67
43
133,4
4
70
32
67
43
9,0
4
53,975
53,988
51,5
75
3
85
29
80
45
63,513
63,526
85
3
85
29
80
45
400
8
11
139,719
139,734
125
130
196,869
196,887
171,4
4
125
43
110
57
51,0
3
82,563
82,578
315
8
103,5
107,3
200
4
63,513
63,526
250
Short taper
1:4
B
B1
D
125
3
235
6
125
43
110
57
6
106,375
106,390
103
133,4
4
145
55
127
67
171,4
4
145
55
127
67
101,0
19,0
5
6
82,563
82,578
55
104,8
4
85
29
80
45
106,375
106,390
133,4
4
85
29
80
45
500
8
128,5
137,3
139,719
139,734
91
95,8
11
136
196,869
196,887
235
6
145
55
127
67
8
630
11
139,719
139,734
136
171,4
4
180
60
127
79
146
156,8
150,0
196,869
196,887
190
235
6
180
60
127
79
11
15
196,869
196,887
190
235
6
225
70
127
87
165
176,3
274,0
285,775
285,795
252
330,2
6
225
70
127
87
Type 3235
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3234
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
29
Type 3544, 3545
Features:
excess vibration
Chuck size A
Short taper
1:4
B
B1
min.
D
max.
E
F
125
3
160
4
3
4
63,513
63,526
53,975
53,988
82,6
70,6
68
72,8
63,513
63,526
42
82,6
59,5
64,8
53,975
53,988
32
70,6
Application:
Options:
200
5
4
82,563
82,578
104,8
63,513
63,526
55
82,6
5
250
6
78
82,8
82,563
82,578
106,375
106,390
104,8
133,4
6
315
8
89
92,8
106,375 139,719
106,390 139,734
76
133,4
171,4
6
8
96,2
101,3
106,375 139,719
106,390 139,734
103
133,4
171,4
400
11
111,7
116,8
196,869
196,887
235
8
11
108
116,8
139,719 196,869
139,734 196,887
136
171,4
235
Qty. of mounting
screws
3
3
3
3
6
3
6
6
6
6
6
6
6
6
6
H
J
K
L
51
20
56
40
51
20
56
40
70
32
67
43
70
32
67
43
70
32
67
43
85
29
80
45
85
29
80
45
85
29
80
45
105
34
95
53
105
34
95
53
125
43
110
57
125
43
110
57
125
43
110
57
145
55
127
67
145
55
127
67
Approx. weight [kg]
5,0
9,0
19,0
32,0
51,0
101,0
Type 3545
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3544
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
30
Type 3244, 3245
Features:
Application:
Options:
Chuck size A
100
Short taper
1:4
B
B1
D
3
min.
max.
E
F
H
J
K
L
Approx. weight [kg]
3
80
53,975
53,988
20
70,6
3
42
17
3,0
Chuck size A
4
53,975
53,988
70,6
3
51
20
56
40
160
70
74,8
32
5,0
3
63,513
63,526
82,6
3
51
20
56
40
250
Short taper
1:4
B
B1
D
125
5
min.
max.
E
F
H
J
K
L
Approx. weight [kg]
82,563
82,578
104,8
6
105
34
95
53
6
103,5
107,3
106,375
106,390
76
133,4
6
105
34
95
53
32,0
200
4
53,975
53,988
42
70,6
3
70
32
67
43
5
81,5
86,3
63,513
63,526
3
82,563
82,578
82,6
3
70
32
67
43
9,0
104,8
6
70
32
67
43
315
8
139,719
139,734
171,4
6
105
34
95
53
6
53,975
53,988
51,5
70,6
3
85
29
80
45
4
63,513
63,526
82,6
3
85
29
80
45
400
8
11
117,7
122,8
106,375
139,719
106,390
139,734
103
133,4
171,4
6
6
125
125
43
43
110
110
57
57
51,0
140
145
196,869
196,887
235
6
125
43
110
57
6
106,375
106,390
103
133,4
6
145
55
127
67
91
95,8
19,0
5
6
82,563
82,578
55
104,8
6
85
29
80
45
106,375
106,390
133,4
6
85
29
80
45
500
8
11
128,5
137,3
139,719
139,734
171,4
6
145
55
127
67
101,0
136
196,869
196,887
235
6
145
55
127
67
8
630
11
146
156,8
139,719
196,869
139,734
196,887
136
190
171,4
235
6
6
180
180
60
60
127
127
79
79
150,0
11
15
165
176,3
196,869
285,775
196,887
285,795
190
252
235
330,2
6
6
225
225
70
70
127
127
87
87
274,0
Type 3245
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3244
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
31
Type 3574, 3575
■■ Application:
operations on conventional lathes, grinders and milling fixtures
Options:
Features:
Chuck size A
80
100
125
160
200
250
315
400
B
B1
C
D H7
E
F
G
H
J
K
L
P
44
3
56
16
67
3xM6
32
13
3xM6
50
3
70
20
83
3xM8
42
17
3xM8
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
3xM8
68
72,8
4
125
42
140
6xM10
70
32
67
43
3xM10
78
82,8
4
160
55
176
6xM10
85
29
80
45
3xM10
89
92,8
5
200
76
224
6xM12
105
34
95
53
3xM12
97,2
101,3
5
260
103
286
6xM16
125
43
110
57
3xM16
109
116,8
5
330
136
362
6xM16
145
55
127
67
3xM16
Approx. weight [kg]
1,5
2,8
5,0
10,0
17,5
29
50
85
Type 3575
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3574
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
32
Type 3274, 3275
3 JAWS, CAST IRON BODY, FRONT MOUNTING (DIN 6350)
Features:
■■ 3 jaw, self-centering, scroll chuck with manual gripping, and a
high quality cast iron body
Chuck size A
80
85
100
B
44
44
B1
-
-
■■ Application:
operations on conventional lathes and milling fixtures
Options:
1000 mm
125
160
200
250
315
400
500
630
50
56
64,5
75
85
94
105
120
135
-
60,8
69,3
79,8
88,8
99,1
113,8
130,8
146,3
C
3
3
3
4
4
4
5
5
5
5
7
D H7
56
62
70
95
125
160
200
260
330
420
545
E
16
18
20
32
42
55
76
103
136
190
252
F
67
72
83
108
140
176
224
286
362
458
586
G
3xM6
-
3xM8
3xM8
6xM10
6xM10
6xM12
6xM16
6xM16
6xM16
6xM16
H
32
32
42
51
70
85
105
125
145
180
225
J
13
43
17
20
32
29
34
43
55
60
70
K
-
-
-
56
67
80
95
110
127
127
127
L
-
-
-
40
43
45
53
57
67
79
87
P
3xM6
3xM6
3xM8
3xM8
3xM10
3xM10
3xM12
3xM16
3xM16
6xM16
6xM16
Approx. weight [kg]
1,5
1,9
2,8
5,0
10,0
17,5
29
50
85
145,0
250,0
Type 3275
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3274
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
33
Type 3704, 3705
4 JAWS, STEEL BODY, (DIN 6350)
Features:
Application:
■■ Suitable for machining square and round workpieces, granting
greater flexibility to machining operations
Options:
1000 mm
Chuck size A
100
125
160
200
250
315
400
500
630
B
B1
C
D H7
E
F
G
H
J
K
L
50
3
70
20
83
3xM8
42
17
-
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
68
72,8
4
125
42
140
6xM10
70
32
67
43
78
82,8
4
160
55
176
6xM10
85
29
80
45
89
92,8
5
200
76
224
6xM12
105
34
95
53
97,2
101,3
5
260
103
286
6xM16
125
43
110
57
109
116,8
5
330
136
362
6xM16
145
55
127
67
119
129,8
5
420
190
458
6xM16
180
60
127
79
129
140,3
7
545
252
586
6xM16
225
70
127
87
Approx. weight [kg]
2,8
5,0
10,0
17,5
29
50
85
145,0
250,0
Type 3705
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3704
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
34
Type 3604, 3605
Application:
Options:
1000 mm
Features:
Chuck size A
125
160
200
250
315
400
500
630
B
56
64,5
75
85
94
105
120
135
B1
60,8
69,3
79,8
88,8
99,1
113,8
130,8
146,3
C
4
4
4
5
5
5
5
7
D H7
95
125
160
200
260
330
420
545
252
E
32
42
55
76
103
136
190
F
108
140
176
224
286
362
458
586
G
3xM8
6xM10
6xM10
6xM12
6xM16
6xM16
6xM16
6xM16
H
51
70
85
105
125
145
180
225
J
20
32
29
34
43
55
60
70
K
56
67
80
95
110
127
127
127
L
40
43
45
53
57
67
79
87
Approx. weight [kg]
5,0
10,0
17,5
29
50
85
145,0
250,0
Type 3605
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3604
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
35
Type 3714, 3715
*
( )
Features:
excess vibration
Chuck size A
160
Short taper
1:4
B
B1
min
D
max.
E
F1
G1
F
*5
68
72,8
82,563
82,578
42
61,9
M10
-
Qty. of mounting
screws
3
G
H
J
K
L
Approx. weight [kg]
70
32
67
43
10,0
200
*5
250
*6
106,375
106,390
55
82,6
M12
3
*6
82,563
82,578
76
104,8
89
92,8
106,375
106,390
55
82,6
M12
-
3
85
29
80
45
85
29
80
45
19,0
315
5
78
82,8
82,563
82,578
42
61,9
M10
-
Application:
Options:
1000 mm
M10
105
34
95
53
*8
6
*8
6
8
106,375
106,390
103
133,4
108
116,8
139,719
139,734
136
171,4
96,2
101,3
139,719
139,734
76
111,1
M16
-
106,375
106,390
103
133,4
139,719
139,734
80
111,1
M16
-
6
105
34
95
53
32,0
400
6
105
34
95
53
M12
125
43
110
57
630
*11
11
196,869
196,887
130
165,1
M 20
-
129
140,3
196,869
196,887
190
235
6
125
43
110
57
M12
145
55
127
67
M16
145
55
127
67
92,0
55,0
6
145
55
127
67
M20
225
70
127
87
285,0
Type 3715
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3714
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
36
Type 3614, 3615
*
( )
Features:
Application:
on conventional lathes and grinders
■■ Suitable for machining square and round workpieces, granting greater
flexibility to machining operations
Options:
Chuck size A
200
Short taper
1:4
B
91
*6
B1
D
250
5
*6
315
*8
6
103,5
95,8
400
*8
6
8
117,7
107,3
500
*11
8
128,5
122,8
11
146
137,3
157,3
min.
106,375
82,563
106,375
139,719
106,375
139,719
106,375
139,719
196,869
139,719
196,869
max.
106,390
82,578
106,390
139,734
106,390
139,734
106,390
139,734
196,887
139,734
196,887
E
55
76
55
76
103
80
103
136
130
136
190
F1
82,6
-
82,6
111,1
-
111,1
-
-
165,1
-
-
G1
M12
-
M12
M16
-
M16
-
-
M 20
-
-
F
-
104,8
-
-
133,4
-
133,4
171,4
-
171,4
235
8
4
8
8
4
4
8
-
M10
-
-
M12
-
M12
M16
-
M16
M20
H
85
105
105
105
125
125
145
145
145
180
180
J
29
34
34
34
43
43
55
55
55
60
60
K
80
95
95
95
110
110
127
127
127
127
127
L
45
53
53
53
57
57
67
67
67
79
Approx. weight [kg]
19,0
Qty. of mounting
screws
4
G
32,0
55,0
92,0
79
160,0
Type 3615
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3614
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
37
Type 3734, 3735
Features:
Chuck size A
125
Short taper 1:4
B
B1
min.
D
max.
E
F
160
3
4
59,5
64,8
53,975 63,513
53,988 63,526
32
75
85
200
4
5
68
72,8
63,513 82,563
63,526 82,578
42
85
104,8
excess vibration
Application:
Options:
1000 mm
250
315
400
500
630
5
6
6
8
6
8
8
11
8
11
11
15
78
89
96,2
108
119
129
82,8
92,8
101,3
116,8
129,8
140,3
82,563 106,375 106,375 139,719 106,375 139,719 139,719 196,869 139,719 196,869 196,869 285,775
82,578 106,390 106,390 139,734 106,390 139,734 139,734 196,887 139,734 196,887 196,887 285,795
55
76
103
136
136
190
190
252
104,8
133,4
133,4
171,4
133,4
171,4
171,4
235
171,4
235
235
330,2
3
3
3
4
4
4
4
4
4
4
4
6
4
6
6
6
H
J
K
L
Approx. weight [kg]
51
20
56
40
51
20
56
40
70
32
67
43
70
32
67
43
85
29
80
45
85
29
80
45
105
34
95
53
105
34
95
53
125
43
110
57
125
43
110
57
145
55
127
67
145
55
127
67
180
60
127
79
180
60
127
79
225
70
127
87
225
70
127
87
5,0
9,0
19,0
32,0
51,0
101,0
150,0
274,0
Type 3735
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3734
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
38
Type 3634, 3635
Features:
Application:
Options:
Chuck size A
125
Short taper 1:4
B
B1
min.
D
max.
E
F
H
J
K
L
Approx. weight [kg]
3
160
4
3
63,513
63,526
53,975
53,988
63,513
63,526
85
3
51
20
56
40
75
3
70
32
67
43
85
3
70
32
67
43
6
82,563
82,578
106,375
106,390
104,8
4
70
32
67
43
133,4
4
70
32
67
43
53,975
53,988
51,5
75
3
85
29
80
45
63,513
63,526
106,375
106,390
171,4
4
105
34
95
53
133,4
4
125
43
110
57
76
139,719
139,734
103
32,0
82,563
82,578
55
104,8
4
85
29
80
45
106,375
106,390
85
3
85
29
80
45
171,4
4
125
43
110
57
133,4
4
85
29
80
45
19,0
6
117,7
122,8
139,719
139,734
6
400
8
103,5
107,3
5
91
95,8
315
8
133,4
4
105
34
95
53
4
9,0
250
106,375
106,390
3
42
5,0
6
6
81,5
86,3
32
75
3
51
20
56
40
Chuck size A
Short taper 1:4
B
B1
min.
D
max.
E
F
H
J
K
L
Approx. weight [kg]
5
70
74,8
53,975
53,988
200
4
106,375
106,390
103
133,4
4
145
55
127
67
51,0
500
8
128,5
137,3
139,719
139,734
11
11
146
156,8
196,869
196,887
136
171,4
4
145
55
127
67
101,0
8
235
6
145
55
127
67
139,719
139,734
136
171,4
4
180
60
127
79
196,869
196,887
190
235
6
180
60
127
79
150,0
Type 3635
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3634
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
39
Type 3744, 3745
Features:
excess vibration
Chuck size A
Short taper 1:4
B
B1
min.
D
max.
E
F
125
160
3
4
59,5
64,8
53,975 63,513
53,988 63,526
32
70,6
82,6
200
4
82,563
82,578
63,513
63,526
315
400
500
630
70,6
104,8
82,6
Qty. of mounting
screws
3
3
3
3
6
3
6
6
6
6
6
6
6
6
6
6
6
6
H
J
K
L
Approx. weight
[kg]
51
20
56
40
51
20
56
40
70
32
67
43
70
32
67
43
70
32
67
43
85
29
80
45
85
29
80
45
85
29
80
45
105
34
95
53
105
34
95
53
125
43
110
57
125
43
110
57
145
55
127
67
145
55
127
67
180
60
127
79
180
60
127
79
225
70
127
87
225
70
127
87
53,975
53,988
5
250
4
68
72,8
63,513
63,526
42
82,6
5,0
3
Application:
Options:
1000 mm
9,0
5
6
6
8
6
8
8
11
8
11
11
15
78
89
96,2
108
119
129
82,8
92,8
101,3
116,8
129,8
140,3
82,563 106,375 106,375 139,719 106,375 139,719 139,719 196,869 139,719 196,869 196,869 285,775
82,578 106,390 106,390 139,734 106,390 139,734 139,734 196,887 139,734 196,887 196,887 285,795
55
76
103
136
136
190
190
252
104,8
133,4
133,4
171,4
133,4
171,4
171,4
235
171,4
235
235
330,2
19,0
32,0
51,0
101,0
150,0
274,0
Type 3745
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3744
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
40
Type 3644, 3645
Features:
Application:
■■ Suitable for machining square and round workpieces, granting greater
flexibility to machining operations
Options:
■■ Chuck size: can be greater than 500 mm, but not exceeding 1000
Chuck size A
125
Short taper 1:4
B
B1
min.
D
max.
E
F
H
J
K
L
Approx. weight [kg]
160
3
4
3
70
74,8
53,975
53,988
63,513
63,526
53,975
53,988
82,6
3
51
20
56
40
70,6
3
70
32
67
43
32
70,6
3
51
20
56
40
5,0
Chuck size A
250
Short taper 1:4
B
B1
min.
D
max.
E
F
H
J
K
L
Approx. weight [kg]
5
82,563
82,578
104,8
6
105
34
95
53
6
103,5
107,3
106,375
106,390
76
133,4
6
105
34
95
53
32,0
200
4
81,5
86,3
63,513
63,526
42
82,6
3
70
32
67
43
9,0
5
3
6
139,719
139,734
106,375
106,390
171,4
6
105
34
95
53
133,4
6
125
43
110
57
117,7
122,8
103
51,0
5
6
82,563
82,578
55
104,8
6
85
29
80
45
106,375
106,390
91
95,8
82,563
82,578
53,975
53,988
51,5
70,6
3
85
29
80
45
104,8
6
70
32
67
43
63,513
63,526
82,6
3
85
29
80
45
133,4
6
85
29
80
45
19,0
400
315
8
4
8
6
139,719
139,734
106,375
106,390
103
133,4
6
145
55
127
67
171,4
6
125
43
110
57
8
128,5
137,3
139,719
139,734
1714,4
6
145
55
127
67
101,0
500
136
11
8
196,869
8196,887
139,719
139,734
136
171,4
6
180
60
127
79
235
6
145
55
127
67
146
456,8
150,0
11
196,869
196,887
190
235
6
180
60
127
79
Type 3645
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3644
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
41
Type 3774, 3775
Features:
■■ Balanced scroll plateand chuck allows higher rotation speeds
Application:
operations on conventional lathes, grinders and miling fixtures
■■ Can be used on CNC lathes, in place of power chucks
Options:
1000 mm
Chuck size A
125
160
200
250
315
400
B
B1
C
D H7
E
F
G
H
J
K
L
P
Approx. weight [kg]
59,5
64,3
4
95
35,5
108
3xM8
51
20
56
40
3xM8
5
68
72,8
4
125
42
140
6xM10
70
32
67
43
3xM10
10,0
78
82,8
4
160
55
176
6xM10
85
29
80
45
3xM10
17,5
89
92,8
5
200
76
224
6xM12
105
34
95
53
3xM12
29
97,2
101,3
5
260
103
286
6xM16
125
43
110
57
3xM16
50
109
116,8
5
330
136
362
6xM16
145
55
127
67
3xM16
85
Type 3775
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3774
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
42
Type 3674, 3675
4 JAWS, CAST IRON BODY, FRONT MOUNTING (DIN 6350)
Features:
excess vibration
Application:
operations on conventional lathes and milling fixtures
■■ Can be used on CNC lathes, in place of power chucks
Options:
1000 mm
Chuck size A
125
160
200
250
315
400
B
B1
C
D H7
E
F
G
H
J
K
L
P
Approx. weight [kg]
56
60,8
4
95
32
108
3xM8
51
20
56
40
3xM8
5,0
64,5
69,3
4
125
42
140
6xM10
70
32
67
43
3xM10
10,0
75
79,8
4
160
55
176
6xM10
85
29
80
45
3xM10
17,5
85
88,8
5
200
76
224
6xM12
105
34
95
53
3xM12
29
94
99,1
5
260
103
286
6xM16
125
43
110
57
3xM16
50
105
113,8
5
330
136
362
3xM16
145
55
127
67
3xM16
85
Type 3675
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3674
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
43
Type 3105
Features:
■■ Chucks are equipped with soft, steel top jaws, which can be
individually shaped by the user and clamp irregularly-shaped
workpieces
■■ Hard two-piece jaws
Application:
Options:
1000 mm
Chuck size A
160
200
250
315
B
64,5
75
85
94
400
105
B1
69,3
79,8
88,8
99,1
113,8
C
4
4
5
5
5
D H7
125
160
200
260
330
E
42
55
76
103
136
F
140
176
224
286
362
G
6xM10
6xM10
6xM12
6xM16
6xM16
H
70
85
105
125
145
J
32
29
34
43
55
Approx. weight [kg]
10
17,5
29
50
85
Type 3105
Standard
accessories
1 set of soft top jaws
1 set of hard master jaws
1 wrench
44
Type 3806, 3807
Features:
excess vibration
Application:
■■ Gripping force is equally distributed over 6 jaws, allowing
chuck to machine thin-walled workpieces and clamp without
deformation
Options:
■■ Large chuck size: can be greater than 630 mm, but not
exceeding 1000 mm
Chuck size A
200
250
315
400
500
630
B
B1
C
D H7
E
F
G
H
J
K
L
Approx. weight [kg]
75
79,8
4
160
55
176
6xM10
85
29
80
45
17,5
85
88,8
5
200
76
224
6xM12
105
34
95
53
29
94
99,1
5
260
103
286
6xM16
125
43
110
57
50
105
113,8
5
330
136
362
6xM16
145
55
127
67
85
120
130,8
5
420
190
458
6xM16
180
60
127
79
145,0
135
146,3
7
545
252
586
6xM16
225
70
127
87
250,0
Type 3807
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3806
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
45
Type 3804, 3805
Features:
Application:
deformation
Options:
1000 mm
Chuck size A
200
250
315
400
500
630
B
B1
C
D H7
E
F
G
H
J
K
L
Approx. weight [kg]
75
79,8
4
160
55
176
6xM10
85
29
80
45
17,5
85
88,8
5
200
76
224
6xM12
105
34
95
53
29
94
99,1
5
260
103
286
6xM16
125
43
110
57
50
105
113,8
5
330
136
362
6xM16
145
55
127
67
85
120
130,8
5
420
190
458
6xM16
180
60
127
79
145,0
135
146,3
7
545
252
586
6xM16
225
70
127
87
250,0
Type 3805
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3804
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
46
SELF-CENTERING SCROLL CHUCKS WITH FINE ADJUSTMENT
Type 3564, 3565
3 JAWS, STEEL BODY, FRONT MOUNTING
Features:
■■ 3 jaw, self-centering scroll chuck
excess vibration
■■ Repeatability: 0,015 mm
■■ Superior accuracy: small screws on the outside enable the
chuck to be adjusted to position with nearly zero runout
(adjusting accuracy within 0,005 mm)
■■ The clamped workpiece is adjusted to the required
concentricity by means of 4 (8 for sizes 400 mm, 500 mm,
630 mm) radially arranged adjusting screws
Application:
made for universal use, but particularly advantageous for
grinding machines, indexing heads and lathes
■■ Especially suitable for machining parts with top concentricity
Options:
■■ Large Chuck size: can be greater than 630 mm, but not
exceeding 1000 mm
Chuck size A
100
125
160
200
250
315
400
500
630
B
C
D
E
F
G
Approx. weight [kg]
68
13
45
20
83
3xM8
3,3
71,5
15
55
35
108
3xM8
5,0
68,6
18
86
42
140
3xM10
9,1
78
20
110
55
176
3xM10
15,5
89
20
145
76
224
3xM12
26,2
96,2
20
180
103
286
3xM16
46,5
123
22
299, 237
136
171,5
6xM16
90,0
144
30
407,16
190
235
6xM20x120
171
150
30
407,16
252
330,2
6xM20x130
302
Type 3565
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3564
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
47
Type 3264, 3265
3 JAWS, CAST IRON BODY, FRONT MOUNTING
Features:
■■ 3 jaw, self-centering scroll chuck
■■ Superior accuracy: chuck can be adjusted to position with nearly zero
runout (adjusting accuracy within 0,005 mm)
■■ The clamped workpiece is adjusted to the required concentricity by
means of 3 tangentially arranged adjusting spindles
■■ Hardened adjusting spindles
■■ Steel adapter plate
Application:
■■ This chuck is made for universal use, but is particularly advantageous
for grinding machines
Options:
Chuck size A
80
100
125
160
200
250
315
B
C min.
D
E min.
F
G
59
3
56
16
67
3xM6
2,8
-
69
4
70
20
83
3xM8
3,5
-
70
5
95
32
108
3xM8
5,6
6,0
80,5
5
125
42
140
3xM10
10
10,5
91
5
160
55
176
3xM10
17,2
18,0
103
6
200
76
224
3XM12
34,5
36,0
120
6
260
103
286
3xM16
57,5
59,0
Approx. weight [kg]
Type 3264
Type 3265
Type 3265
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3264
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
48
Type 3864, 3865
6 JAWS, STEEL BODY, FRONT MOUNTING
Features:
■■ 6 jaw, self-centering chuck
excess vibration
■■ Superior accuracy: small screws on the outside enable the
chuck to be adjusted to position with nearly zero runout
(adjusting accuracy within 0,005 mm)
■■ The clamped workpiece is adjusted to the required
concentricity by means of 4 (8 for sizes 400 mm, 500 mm,
630 mm) radially arranged adjusting screws
Application:
for universal use, but particularly advantageous for grinding
machines, indexing heads and lathes
deformation
Options:
1000 mm
Chuck size A
125
160
200
250
315
400
500
630
B
C
D
E
F
G
H
J
K
L
Approx. weight [kg]
71,5
15
55
35
108
3xM8
51
20
56
40
6,2
68,6
18
86
42
140
3xM10
70
32
67
43
10,5
78
20
110
55
176
3xM10
85
29
80
45
17,5
89
20
145
76
224
3xM12
105
34
95
53
33,0
96,2
20
180
103
286
3xM16
125
41
110
56
56,0
123
22
299, 237
136
171,5
6xM16
145
55
127
67
99,0
144
30
407,16
190
235
6xM20x120
180
60
127
79
180
150
30
407,16
252
330,2
6xM20x130
225
70
127
87
326
Type 3865
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 set of hard
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 3864
Standard
accessories
1 set of soft solid
jaws
1 set of soft
top jaws
49
SCROLL CHUCKS FOR SHARPENING DRILLS
Type 3266, 3866
ø 80, 100
Standard
accessories
Application:
■■ Lever scroll chuck is specially designed for grinding twist drills and
other cutting tools
Options:
■■ Fine adjustment in sizes 125 mm and 160 mm to the required
concentricity by means of 4 radially arranged adjusting screws
Type 3266
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
Chuck size
ø 125, 160
1 operating
lever
3 JAWS TYPE 3266
A
B
C
D
E
F
G
80
100
125
160
200
35
40
48
52
66
1,5
2
8
8
13
48
75
70
78,5
115
24
32
38
52
64
39
62
56
65
84
3xM6
3xM8
3xM6
3xM6
3xM8
A
H
J
K
L
80
100
125
160
200
52
85
83
96
147
35
42
51
70
85
13
17
20
33
30
82
102
129
164
205
Operating lever Approx. weight
length
[kg]
100
1,1
125
3,2
160
4,0
200
7,3
200
13,3
Spare parts - see page 55
Type 3866
ø 80, 100
Standard
accessories
1 operating
lever
1 set of hard solid jaws
Chuck size
6 JAWS TYPE 3866
A
B
C
D
E
F
G
80
100
125
160
35
40
48
52
1,5
2
8
8
48
75
70
78,5
24
32
38
52
39
62
56
65
3xM6
3xM8
3xM6
3xM6
A
H
J
K
L
S
80
100
125
160
52
85
83
96
35
42
50
58
22
25
36
36
82
102
128
164
1-23
1,5-31
2-37
3-51
Operating
lever length
100
125
160
200
ø 125, 160
Chuck size
mm
80
100
125
160
Code No
for chuck type 3866
6 jaw set
0642 985 411 106
0642 985 411 208
0642 985 411 300
0642 985 411 401
Spare parts - hard outside jaws-set
Example of order: 0642 985 411 106
50
Approx.
weight [kg]
2,0
2,8
4,0
7,0
SCROLL CHUCKS FOR SHARPENING DRILLS
Type 3867, 3868
Standard
accessories
Features:
■■ Plain back (front mounting)
Application:
■■ The wrench operated scroll chuck is specially designed for grinding
twist drills and other cutting tools
Options:
■■ Additional tool support (type 3868)
Type 3867
1 set of hard solid
jaws
1 wrench
Type 3867
3867
ø80; ø110
Chuck size
85
110
160
B
44
50
79
Chuck size
mm
E
F
85
110
160
25,5
32,1
51
70
95
140
G
Type 3868
C
3,9
4
4
J
3xM6
32
3xM6
38
3xM10
51
Standard
accessories
3867
ø160
A
85
110
160
D
62
86
125
K
S
Approx.
weight [kg]
37
33
51
1-25
2,3-32
2,5-50
1,9
3,5
4,5
1 set of hard solid
jaws
1 operating
lever
Type 3868
Chuck size
85
Operating lever length
100
Approx. weight [kg]
2,5
Spare parts - hard solid jaws - set
Chuck size
85
110
160
3868
ø85
Code No
Code No
for chuck type 3867
for chuck type 3868
0642 985 411 605
0642 985 411 707
0642 985 411 809
0642 985 412 107
-
5C COLLET CHUCKS
Type 3911, 3960
Features:
■■ The simple wrench operated scroll provides uniform, distortion free
clamping of workpieces and low collet exchange times
Application:
■■ The type 3911 collet chuck is designed for use with 5C collets and can
be used for turning, facing, boring, grinding and milling operations
■■ The type 3960 collet chuck allows for fine adjustment to the required
concentricity by means of 4 radially arranged adjusting screws
Options:
■■ Camlock and threaded mounts available on request
Standard accessories:
■■ Wrench
Spring
collet 5C
(not included)
Type 3911
Chuck size
A
B
125
126
107,5
C
D
F
G
Approx.
weight [kg]
4
95
108
3xM8x45
4,5
Example of order: 3911-125-5C
Spring
collet 5C
(not included)
Type 3960
Chuck size
A
B
C
D
F
G
Approx.
weight [kg]
125
126
117
15
55
108
3xM8x55
5,4
Example of order: 3960 - 125-5C
51
SELF-CENTERING SCROLL CHUCKS SPECIALLY DESIGNED
FOR SMALL TURNING DIAMETER
Type 3286
3 JAWS, STEEL BODY, WITH THREADED MOUNTING
Features:
■■ Special compact design
■■ Very small turning diameter
■■ Hard reversible jaws
Application:
■■ Especially designed for household and non-professional use
■■ Suitable for lathes with a threaded spindle
■■ Can be used with both metal and wood
3286 - 49
3286 - 60
Ø 49
Ø 41
M12x1
29
D
D
D =Ø 20 x Ø 75 D= Ø 0,5 x Ø 32
D=Ø 20 x Ø 52
Chuck size
Mounting
Maximum speed (rpm)
Approx. weight [kg]
49
M12x1
4000
0,5
60
M14x1
4000
0,68
SPARE PARTS
Type 3286-49
Type 3286-60
Code No
Jaw
0642 985 399 142
0642 985 399 155
Scroll plate
0642 985 399 183
0642 985 399 170
Wrench
0642 985 399 101
52
ENGINEERING DATA
FOR SELF-CENTERING SCROLL CHUCKS
GRIPPING RANGES FOR CHUCKS TYPE 3200, 3500, 3600, 3700
Chuck size
d1
d2
d3
Hard solid jaws
d4
d5
d1
d2
d3
Hard two-piece jaws
d4
d5
max. swing diameter
Chuck size
d1
d2
d3
Hard solid jaws
d4
d5
d1
d2
d3
Hard two-piece jaws
d4
d5
max. swing diameter
80
100
125
160
200
2-27
25-50
48-71
22-46
45-69
90
3-33
32-62
62-93
25-56
56-87
117
3-50
39-83
80-125
34-74
72-115
3-50
52-96
95-125
34-76
75-118
151
3-64
50-107
98-160
42-100
94-154
3-64
62-121
115-160
42-97
88-146
204
4-90
60-145
130-200
52-135
120-202
4-90
72-156
133-200
50-130
105-190
246
250
315
400
500
630
800
915
1000
5-118
77-188
160-250
62-174
145-256
5-118
86-197
160-250
58-165
125-235
306
10-131
90-215
190-315
78-200
172-299
10-131
103-226
190-315
65-182
145-265
384
10-180
103-272
230-400
85-252
210-380
10-180
127-294
230-400
72-228
165-329
472
20-235
140-357
276-500
120-335
245-476
20-235
110-400
190-500
120-410
200-485
600
30-335
180-487
345-630
160-465
325-630
30-335
120-570
200-630
140-590
210-665
770
150-482
302-634
468-800
282-614
448-780
150-482
240-724
316-800
252-736
328-812
940
200 - 550
300 - 950
380 - 1025
350 - 1000
450 - 1025
-
250 - 600
350 - 1080
430 - 1150
425 - 1070
500 - 1150
-
GRIPPING RANGES FOR CHUCKS TYPE 3864, 3865
Chuck size
d1
d2
d3
Hard solid jaws
d4
d5
d1
d2
d3
Hard two-piece jaws
d4
d5
max. swing diameter
125
160
200
250
315
400
500
630
6-43
42-78
83-120
34-68
74-110
6-43
50-87
94-125
33-70
76-119
151
8-64
52-107
102-160
47-100
98-154
8-64
67-121
118-160
45-97
92-146
204
8-90
64-145
132-200
55-135
121-202
8-90
74-156
134-200
52-130
109-190
246
12-118
82-188
165-250
68-174
150-256
12-118
82-188
164-250
68-174
150-256
306
12-131
95-215
192-315
82-200
178-299
12-131
108-226
153-315
68-182
150-265
384
15-202
140-308
232-400
95-280
213-400
15-202
132-296
236-400
73-252
169-352
472
30-235
152-361
291-500
132-335
270-474
30-235
121-402
197-478
135-413
210-489
600
40-335
192-487
358-630
175-467
340-630
40-335
132-555
210-630
150-585
220-661
770
Do not exceed maximum gripping ranges!
MAXIMUM PERMISSIBLE ROTATION SPEEDS (rpm)
Chuck size
80
100
125
160
200
250
315
400
500
630
800
915
1000
3100*, 3200, 3600
3500, 3700
3564, 3565
3864, 3865
4505*
4605*
4705*
4805*
5000
7000
4500
6300
6300
4000
5500
5500
3800
3600
4600
4600
3200
3000
4000
4000
2800
2500
2000
3000
2500
2500
3500
3500
2400
2000
1800
2500
2000
2000
2800
2800
2400
1500
1500
2000
1700
1600
2000
2000
1400
1000
1000
1500
1300
1000
1300
1300
900
700
600
1000
800
800
1000
1000
700
540
480
750
660
600
800
400
700
400
600
* For lathe chucks type 3100, 4505, 4605, 4705 and 4805 the specified permissible speeds are only applicable for work-pieces not exceeding a specific unbalance of 25 gmm/kg.
53
ENGINEERING DATA
FOR SELF-CENTERING SCROLL CHUCKS
TOTAL GRIPPING FORCE FOR CHUCKS TYPE 3100, 3200, 3500, 3600, 3700, 3800
Chuck size
80
100
125
160
200
250
315
400
500
630
800
915
1000
Torque on wrench
[Nm]
35
50
75
120
160
180
200
280
360
460
500
500
500
[daN]
1000
1700
2400
3100
2400*
3700
2900*
4600
3600*
5500
4400*
6500
4900*
7200
8000
9000
9000
9000
* for 3100
The total gripping force is the sum of all jaw forces acting radially on the stationary workpiece. The specified gripping forces are approximate values.
They apply to chucks in perfect condition which have been lubricated with greases recommended in operating instructions.
BALANCE VALUE FOR SELF-CENTERING CHUCKS TYPE 3500, 3700
Chuck size
80
100
125
160
200
250
315
400
500
630
gcm
11
16
23
32
45
63
90
140
300
640
CENTERING ACCURACY FOR SELF-CENTERING CHUCKS TYPE
3200, 3500, 3600, 3700, 3800
Chuck size
mm
80
100
125
160
200
250
315
400
500
630
800
915
1000
Hard solid jaws
10
14
40
40
60
35
63
10
14
18
40
40
75
50
80
18
25
30
60
50
100
62
100
18
30
40
60
50
135
88
100
30
40
53
80
80
162
96
160
30
53
75
80
80
200
150
160
53
75
100
120
125
252
210
250
53
100
125
120
125
282
250
250
75
100
125
160
200
282
300
400
75
125
160
160
200
325
400
400
160
200
250
160
325
500
400
500
250
315
400
160
500
630
500
-
250
315
400
160
500
630
500
-
Hard two-piece jaws
-
-
120
150
185
225
300
350
400
400
500
630
630
0,15
0,15
0,06
0,15
0,15
0,06
0,15
0,15
0,06
d
l
n
p
s
w
Centering accuracy (mm)
3500-I
a
b
c
0,010
0,013
0,008
0,015
0,018
0,010
0,020
0,023
0,013
0,025
0,028
0,015
0,030
0,033
0,015
0,050
0,055
0,030
0,070
0,075
0,050
3500
3700
3800
a
b
c
0,020
0,025
0,015
0,030
0,035
0,020
0,040
0,045
0,025
0,050
0,055
0,030
0,060
0,065
0,030
0,10
0,10
0,05
0,10
0,10
0,05
3200
3600
a
b
c
0,020
0,025
0,015
0,030
0,035
0,020
0,040
0,045
0,025
0,050
0,055
0,030
0,060
0,065
0,030
0,10
0,10
0,05
0,10
0,10
0,05
3284
3285
a
b
c
0,05
0,075
0,04
0,08
0,075
0,07
SPINDLE NOSE CENTERING ACCURACY
3500
A, B
3200, 3600, 3700
Ø 80 - 400
0,003 mm
Ø 80 - 160
Ø 500 - 630
0,005 mm
Ø 200 - 800
0,003 mm
0,005 mm
To obtain the specified centering accuracy of a chuck mounted on a machine tool it is necessary:
1) to ensure the machine spindle nose runout does not exceed the values specified,
2) to meet the basic requirements for correct mounting of the chuck on the spindle nose,
according to the chuck installation instructions.
54
SPARE PARTS FOR SELF-CENTERING LATHE CHUCKS
HARD OUTSIDE SOLID JAWS - SETS 1)
Chuck size
mm
80
100
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
Code No
For chuck
type 3200, 3500
3 jaw set
0642 985 350 009
0642 985 350 100
0642 985 350 202
0642 985 350 304
0642 985 350 406
0642 985 350 508
0642 985 350 600
0642 985 350 701
0642 985 350 803
0642 985 350 905
0642 985 352 000
For chuck
type 3600, 3700
4 jaw set
0642 985 381 970*
0642 985 390 205
0642 985 390 307
0642 985 390 409
0642 985 390 500
0642 985 390 602
0642 985 390 704
0642 985 390 806
0642 985 390 819
-
For chuck
type 3864
6 jaw set
0642 985 400 209
0642 985 400 300
0642 985 400 402
0642 985 400 504
0642 985 400 606
0642 985 400 708
0642 985 400 800
0642 985 349 009
-
For chuck
type 3266
3 jaw set
0642 985 350 024
0642 985 350 126
0642 985 350 228
0642 985 350 304
0642 985 350 406
-
* for 3700
HARD INSIDE SOLID JAWS - SETS 1)
Chuck size
mm
80
100
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
Code No
For chuck
type 3200, 3500
3 jaw set
0642 985 351 000
0642 985 351 101
0642 985 351 203
0642 985 351 305
0642 985 351 407
0642 985 351 509
0642 985 351 600
0642 985 351 702
0642 985 351 804
0642 985 351 906
0642 985 352 102
For chuck
type 3600, 3700
4 jaw set
0642 985 381 982 *
0642 985 391 206
0642 985 391 308
0642 985 391 400
0642 985 391 501
0642 985 391 603
0642 985 391 705
0642 985 391 807
0642 985 391 810
-
For chuck
type 3864
6 jaw set
0642 985 401 200
0642 985 401 301
0642 985 401 403
0642 985 401 505
0642 985 401 607
0642 985 401 709
0642 985 401 800
0642 985 351 975
-
For chuck
type 3266
3 jaw set
0642 985 351 025
0642 985 351 127
0642 985 351 229
0642 985 351 305
0642 985 351 407
-
* for 3700
SOFT SOLID JAWS - SETS
Chuck size
mm
80
100
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
For chuck
type 3200, 3500
3 jaw set
0642 985 360 007
0642 985 360 109
0642 985 360 200
0642 985 360 302
0642 985 360 404
0642 985 360 506
0642 985 360 608
0642 985 360 700
0642 985 360 801
0642 985 360 903
0642 985 360 929
For chuck
type 3600, 3700
4 jaw set
0642 985 398 100 *
0642 985 398 202
0642 985 398 304
0642 985 398 406
0642 985 398 508
0642 985 398 600
0642 985 398 701
0642 985 398 803
0642 985 398 905
-
For chuck
type 3864
6 jaw set
0642 985 402 200
0642 985 402 302
0642 985 402 404
0642 985 402 506
0642 985 402 608
0642 985 402 700
0642 985 402 801
0642 985 402 903
-
* for 3700
HARD 2-PIECE REVERSIBLE JAWS - SETS 1)
Chuck size
mm
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
For chuck
type 3200, 3500
3 jaw set
0642 985 353 205
0642 985 353 307
0642 985 353 409
0642 985 353 500
0642 985 353 602
0642 985 353 704
0642 985 353 806
0642 985 353 908
0642 985 354 002
For chuck
type 3600, 3700
4 jaw set
0642 985 392 207
0642 985 392 309
0642 985 392 400
0642 985 392 502
0642 985 392 604
0642 985 392 706
0642 985 392 808
0642 985 392 900
-
For chuck
type 3865
6 jaw set
0642 985 403 201
0642 985 403 303
0642 985 403 405
0642 985 403 507
0642 985 403 609
0642 985 403 700
0642 985 403 802
0642 985 403 904
-
55
HARD TOP JAWS - SETS 1)
Chuck size
mm
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
For chuck
type 3200, 3500
For chuck
type 3600, 3700
For chuck
type 3865
3 jaw set
0642 985 328 205
0642 985 328 307
0642 985 328 409
0642 985 328 500
0642 985 328 602
0642 985 328 704
0642 985 328 806
0642 985 328 908
0642 985 328 908
4 jaw set
0642 985 378 206
0642 985 378 308
0642 985 378 400
0642 985 378 501
0642 985 378 603
0642 985 378 705
0642 985 378 807
0642 985 378 909
-
6 jaw set
0642 985 408 206
0642 985 408 308
0642 985 408 400
0642 985 408 501
0642 985 408 603
0642 985 408 705
0642 985 408 807
0642 985 408 909
-
HARD MASTER JAWS - SETS 1)
Chuck size
mm
125
160
200
250
315
400
500
630*
800
Code No
Code No
Code No
Code No
Code No
For chuck
type 3100
For chuck
type 3200, 3500
For chuck
type 3600, 3700
For chuck
type 3865
For chuck
type 3295
2 jaw set
0642 985 307 106
0642 985 307 208
0642 985 307 300
0642 985 307 401
0642 985 307 900
-
3 jaw set
0642 985 357 209
0642 985 357 300
0642 985 357 402
0642 985 357 504
0642 985 357 606
0642 985 357 708
0642 985 357 800
0642 985 357 901
0642 985 358 006
4 jaw set
0642 985 396 200
0642 985 396 302
0642 985 396 404
0642 985 396 506
0642 985 396 608
0642 985 396 700
0642 985 396 801
0642 985 396 814
-
6 jaw set
0642 985 409 207
0642 985 409 309
0642 985 409 400
0642 985 409 502
0642 985 409 604
0642 985 409 706
0642 985 409 808
0642 985 409 900
-
3 jaw set
0642 985 399 860
0642 985 399 873
0642 985 399 886
-
* for 3295 - 630
SOFT 2-PIECE JAWS - SETS
Chuck size
mm
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
Code No
For chuck
type 3100
For chuck
type 3200, 3500
For chuck
type 3600, 3700
For chuck
type 3865
2 jaw set
0642 985 300 100
0642 985 300 201
0642 985 300 303
0642 985 300 405
0642 985 301 100
-
3 jaw set
0642 985 355 207
0642 985 355 309
0642 985 355 400
0642 985 355 502
0642 985 355 604
0642 985 355 706
0642 985 355 808
0642 985 355 900
0642 985 356 004
4 jaw set
0642 985 394 209
0642 985 394 300
0642 985 394 402
0642 985 394 504
0642 985 394 606
0642 985 394 708
0642 985 394 800
0642 985 394 901
-
6 jaw set
0642 985 405 216
0642 985 405 318
0642 985 405 410
0642 985 405 511
0642 985 405 613
0642 985 405 715
0642 985 405 804
0642 985 356 017
-
Type 3865
SOFT TOP JAWS - SETS
Chuck size
mm
125
160
200
250
315
400
500
630
800
Code No
Code No
Code No
Code No
For chuck
type 3100
For chuck
type 3200, 3500
For chuck
type 3600, 3700
For chuck
type 3865
2 jaw set
0642 985 305 308
0642 985 305 400
0642 985 305 501
0642 985 305 603
0642 985 305 705
-
3 jaw set
0642 985 330 206
0642 985 330 308
0642 985 330 400
0642 985 330 501
0642 985 330 603
0642 985 330 705
0642 985 330 807
0642 985 330 909
0642 985 330 909
4 jaw set
0642 985 382 209
0642 985 382 300
0642 985 382 402
0642 985 382 504
0642 985 382 606
0642 985 382 708
0642 985 382 800
0642 985 382 901
-
6 jaw set
0642 985 407 220
0642 985 407 322
0642 985 407 424
0642 985 407 526
0642 985 407 628
0642 985 407 720
0642 985 407 806 *
0642 985 407 908 *
-
* not bevelled
Hard jaws, supplied as supplement or as spares, must be ground on the chuck, otherwise centering accuracy does not
conform to the limits. This job can be done in the BISON plant at an extra charge. In case of a subsequent jaw delivery please
return the chuck.
1)
56
STUD BOLT
Chuck size
Code No
Chuck size
Code No
mm
For chuck type 3100, 3200,
3600, 4500, 4600,4700,4800
mm
3600, 4500, 4600, 4700, 4800
80
100
125
160
200
250
0642 985 335 109
0642 985 335 109
0642 985 335 200
0642 985 335 200
0642 985 335 404
0642 985 335 404
315
400
500
630
800
0642 985 335 404
0642 985 335 700
0642 985 335 700
0642 985 335 700
0642 985 335 700
PINION
Chuck size
Code No
Code No
Code No
mm
3600, 4500, 4600, 4700, 4800
For chuck type 3500, 3700, 3800
For chuck type 3295
80
100
125
160
200
250
315
400
500
630*
800
0642 985 334 006
0642 985 334 108
0642 985 334 200
0642 985 334 301
0642 985 334 403
0642 985 334 505
0642 985 334 607
0642 985 334 709
0642 985 334 800
0642 985 334 902
0642 985 335 007
0642 985 334 006
0642 985 334 108
0642 985 362 202
0642 985 362 304
0642 985 362 406
0642 985 362 508
0642 985 362 600
0642 985 362 701
0642 985 362 803
0642 985 362 905
-
0642 985 399 613
0642 985 399 626
0642 985 399 639
-
* for 3295 - 660
SCROLL PLATE
Chuck size
Code No
Code No
Code No
mm
3600, 4500, 4600, 4700, 4800
For chuck type 3500, 3700, 3800
For chuck type 3295
80
100
125
160
200
250
315
400
500
630*
800
0642 985 361 008
0642 985 361 100
0642 985 367 207
0642 985 367 309
0642 985 367 400
0642 985 367 502
0642 985 367 604
0642 985 367 706
0642 985 367 808
0642 985 367 900
0642 985 367 003
0642 985 361 010
0642 985 361 112
0642 985 361 201
0642 985 361 303
0642 985 361 405
0642 985 361 507
0642 985 361 609
0642 985 361 700
0642 985 361 726
0642 985 361 741
-
0642 985 399 715
0642 985 399 728
0642 985 399 730
-
SAFETY WRENCH
LOCKING HALF-RING
SLEEVE BEARING
Code No
Code No
Code No
* for 3295-660
Safety wrench
Chuck size
mm
Locking half-ring
Sleeve bearing
80
85
100
125
160
200
250
315
400
500
630
800
For chuck type 3100, 3200, 3500, For chuck type 3500, 3700, 3800 For chuck type 3500, 3700, 3800
3600, 3700, 3800
0642 985 340 102
0642 985 340 102
0642 985 340 204
0642 985 340 204
0642 985 340 306
0642 985 340 306
0642 985 340 408
0642 985 340 408
0642 985 340 500
0642 985 340 601
0642 985 340 601
0642 985 340 703
0642 985 363 203
0642 985 363 305
0642 985 363 407
0642 985 363 509
0642 985 363 600
0642 985 363 702
0642 985 363 804
0642 985 363 906
-
0642 985 364 204
0642 985 364 306
0642 985 364 408
0642 985 364 500
0642 985 364 601
0642 985 364 703
0642 985 364 805
0642 985 364 907
-
57
ADJUSTING SPINDLE
Chuck size
mm
200
250
315
400
500
630
Code No
For chuck type 4500, 4600, 4700, 4800
0642 985 751 100
0642 985 751 202
0642 985 751 304
0642 985 755 104
0642 985 755 206
0642 985 755 308
HARD MASTER JAW - SETS
Chuck size
mm
200
250
315
400
500
630
Code No
Code No
For chuck type 4500, 4700
3 jaw set
0642 985 752 305
0642 985 752 407
0642 985 752 509
0642 985 756 502
0642 985 756 604
0642 985 756 706
4 jaw set
0642 985 753 408
0642 985 753 500
0642 985 753 601
0642 985 758 107
0642 985 758 209
0642 985 758 300
HARD SOLID REVERSIBLE JAW - SETS
Chuck size
mm
200
250
315
400
500
630
Code No
Code No
3 jaw set
0642 985 751 508
0642 985 751 600
0642 985 751 701
0642 985 755 501
0642 985 755 603
0642 985 755 705
4 jaw set
0642 985 752 600
0642 985 752 702
0642 985 752 804
0642 985 757 106
0642 985 757 208
0642 985 757 300
SOFT SOLID JAW - SETS
Chuck size
mm
200
250
315
400
500
630
Code No
Code No
3 jaw set
0642 985 751 905
0642 985 752 000
0642 985 752 101
0642 985 756 105
0642 985 756 207
0642 985 756 309
4 jaw set
0642 985 753 000
0642 985 753 102
0642 985 753 204
0642 985 757 503
0642 985 757 605
0642 985 757 707
MOUNTING BOLTS FOR LATHE CHUCKS TYPE 3100, 3200, 3500, 3600, 3700, 4300
AND FOR ADAPTER PLATES TYPE 8200
STUD AND LOCKNUT - DIN 55027
Size
M10x34
M10x39
M10x43
M12x50
M16x60
M20x75
M24x90
Taper size 1 : 4
3
4
5
6
8
11
15
jaws - set
3
3
4
4
4
6
6
Code No 1)
0642 985 821 103
0642 985 821 205
0642 985 821 307
0642 985 821 409
0642 985 821 500
0642 985 821 602
0642 985 821 704
STUD FOR CAMLOCK - DIN 55029
Size
M10x1-35
M10x1-37
M12x1-43
M16x1,5-49
M20x1,5-55,5
M22x1,5-67
M24x1,5-76
M27x2-89
1)
Tuleja
Taper size 1 : 4
3
4
5
6
8
11
15
20
jaws - set
3
3
6
6
6
6
6
6
Code No 1)
0642 985 825 107
0642 985 825 209
0642 985 825 300
0642 985 825 402
0642 985 825 504
0642 985 825 606
0642 985 825 708
0642 985 825 800
for one piece
58
MAIN DIMENSIONS OF HARD SOLID JAWS AND SOFT
SOLID JAWS FOR CHUCKS TYPE 3200, 3500, 3700, 3864
Chuck size
80
100
125
160
A
B
C
D
E
F
G
H
J
K
32
11
28
6
6
6
9,5
21
9,5
21
0,03
0,07
42
15
32
6
6
7
11
27
12
27,5
0,09
0,13
51
20
40
8
8
8
13
33,5
13
33,5
0,18
0,26
70
20
53
8
8
10
19
45
22
47,5
0,36
0,50
Hard solid inside
and outside jaws
Soft solid jaws
Dimensions G and H apply to outside jaws
Dimensions J and K apply to inside jaws
hard jaws
soft jaws
Approx. weight
[kg]
Chuck size
200
250
315
400
500
630
800
A
B
C
D
E
F
G
H
J
K
85
25
54
9
10
12
23
57
23
57
0,50
0,80
105
28
63
11
12
14
28
69,5
28
69,5
0,80
1,36
125
32
73
12,7
12
18
34,5
83
34,5
83
1,32
1,90
145
36
92
15
14
22
36
99
36
99
2,35
2,46
180
40
100
16
14
26
50
119,5
50
119,5
3,36
5,00
225
50
110
16
14
28
66
149
66
149
5,80
8,36
225
50
110
16
14
28
66
149
66
149
5,80
8,36
Approx. weight
[kg]
hard jaws
soft jaws
MOUNTING DIMENSIONS OF HARD MASTER JAWS
FOR CHUCKS TYPE 3100, 3200, 3500, 3600, 3700, 3865
ø125 - 250
ø315 - 400
Chuck size
125
160
200
250
315
A
B
C
D
E
F - 0,03
G + 0,01
H
J
K
L
M
S
54
20
28
8
8
7,94
12,69
22,6
4
16
13,5
65
20
29
8
8
7,94
12,69
28,6
4
19,05
14
79
25
33
9
10
7,94
12,69
34,9
4
22,25
14
110
32
40
12,7
12
12,7
19,4
47,6
4
31,75
16
M12
3,2
0,77
Approx. weight [kg]
3,2
3,2
3,2
92
28
36
11
12
12,7
19,04
39,7
4
27
16
M12
3,2
0,14
0,18
0,30
0,48
M8
M6*
M10
M8*
M10
M8*
ø500
ø630 - 800
Chuck size
400
500
630
800
915
1000
A
B
C
D
E
F - 0,03
G + 0,01
H
J
K
L
M
S
130
36
49
15
14
12,7
19,04
57,1
7,2
38,1
22
M16
3,2
166
40
54
16
14
12,7
19,04
57,1
7,2
38,1
32,5
M20
3,2
210
50
54,5
16
14
12,7
19,04
57,1
7,2
38,1
32,5
M20
3,2
225
50
54,5
16
14
12,7
19,04
57,1
7,2
38,1
32,5
M20
3,2
283
70
64
22
20
12,7
19,04
57,1
7,2
38,1
36
M22
3,2
328
70
64
22
20
12,7
19,04
57,1
7,2
38,1
36
M22
3,2
Approx. weight [kg]
1,10
2,18
3,34
3,4
6,65
7,7
* for 3865
59
MOUNTING DIMENSIONS OF TOP JAWS
FOR CHUCKS 3100, 3200, 3500, 3600, 3700, 3865
Chuck size
Hard top jaws
A
A1
B
B do 3100
C
D
E
F
G
H
H1
J
K
L
L1
M
N
O
P
R
R1
hard jaws
Approx.
weight [kg]
soft jaws
125
160
200
250
315
56
64
22
38,5
7,95
4
3,2
12,69
22,6
25
67
78
25
40
41,5
7,95
4
3,2
12,69
28,6
34
80
90
27
40
110
120
37
52
55
12,71
4
3,2
19,04
47,6
53
14
20
14,5
40
31,75
13
26,5
68
35,4
30,7
0,90
1,60
10
26
16
8
14,5
35
13
15
0,17
12
29
19,05
8,5
18
41,5
16
21
0,26
12
31
22,25
9,5
21,5
51
19
24
0,36
95
106
32,5
47
51,5
12,71
4
3,2
19,04
39,7
45
14
20
14,5
38
27
12
24,5
59
22
27,5
0,62
0,30
0,46
0,65
1,15
9
15
6,6**
11**
11
18
41,5*
43,5
7,95
4
3,2
12,69
34,9
40
9**
14**
11
18
9**
14**
* for 3100
** for 3865
Soft top jaws
Chuck size
A
A1
B
B do 3100
C
D
E
F
G
H
H1
J
K
L
L1
M
N
O
P
R
R1
hard jaws
Approx.
weight (kg)
soft jaws
400
500
630
800
915
1000
127
140
42
52
64,5
12,71
4
6,3
19,04
57,1
63
18
26
18,5
45,5
38,1
13,5
27
76,5
28,5
34,4
1,35
127
140
42
74,5
12,71
41
6,3
19,04
57,1
63
22
33
21
56
38,1
17
50
88
28,5
34,4
1,55
127
160
52
82
12,71
4
6,3
19,04
57,1
63
22
33
21
64
38,1
21
51
89
28,5
34,4
2,42
127
160
52
82
12,71
4
6,3
19,04
57,1
63
22
33
21
64
38,1
21
51
89
28,5
34,4
2,42
175
190
75
97
12,71
4,5
6,3
19,04
95,2
105
24
35
23
78
38,1
28
48
124
67
76,5
5,5
175
190
75
97
12,71
4,5
6,3
19,04
95,2
105
24
35
23
78
38,1
28
48
124
67
76,5
5,5
2,20
2,40
4,20
4,20
-
-
MOUNTING BOLTS FOR TOP JAWS
Chuck size
mm
125
140
160
200
250
315
400
500
630
800
bolt 1
M8x25
M8x25
M10x30
M10x30
bolt 2
M6x30*
M8x30*
M8x30*
M12x40
M12x40
M16x45
M20x75
M20x80
M20x80
M8x20
M8x20
M10x20
M10x20
M6x20*
M8x20*
M8x20*
M12x25
M12x25
M16x30
M20x40
M20x40
M20x40
* for 3865
Example of order: M10x30
60
3 JAW CHUCKS WITH MORSE TAPER
Type 9154, 9155, 9156, 9164, 9165,
9184, 9185, 9186, 9187, 4954, 4956
Features:
■■ 3 jaw chuck with morse taper
■■ Able to work in horizontal and vertical positions
■■ Able to divide and block workpiece during machining (type 9184,
9185, 9186 and 9187)
Application:
■■ Designed for simultaneously supporting and gripping long objects
(tubes, shaft etc.) during turning, milling and grinding operations
■■ Can replace typical center in machine tailstock
ROTATING - Type 9154, 9155
D
Morse Taper
A
B
rpm
Approx. weight [kg]
80
80
100
100
125
125
160
2
3
3
4
4
5
5
102,5
102,5
111,5
113,0
127,0
127,0
149,5
110
4000
3,5
3,8
5,5
5,9
7,9
8,6
14,3
3500
3200
3000
DEAD - Type 9156
Standard
accessories
Type 9154, 9156
Type 9155
D
Morse Taper
A
80
80
100
125
125
160
160
2
3
3
4
5
4
5
65,5
62,5
68,5
85,0
105,0
93,5
93,5
rpm
Approx. weight [kg]
2,2
2,3
3,7
6,7
7,0
14,9
15,2
4000
3500
3200
3000
1 chuck 3274
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 chuck 3275
1 set of hard top
jaws
1 set of hard
master jaws
1 wrench
D
B
E
80
100
125
160
44
50
56
64,5
16
20
32
42
C
Solid jaws
2-piece reversible jaws
13
17
20
32
40
43
d1 min.
d2 max.
2
3
3
3
71
83
125
160
ROTATING WITH FINE ADJUSTMENT CHUCKS - Type 9164, 9165
D
Morse Taper
A
rpm
Approx. weight [kg]
100
100
125
125
160
3
4
4
5
5
151
154,5
155,5
160,5
156,5
2500
2500
2000
2000
1800
6,8
7,1
9,2
10,3
32,4
Type 9164
Type 9165
Standard
accessories
Example of order: 9164 - 100/3 AE
1 chuck 3564
1 set of outside hard
solid jaws
1 set of inside
hard solid jaws
1 wrench
1 chuck 3565
1 set of hard top
jaws
1 set of hard
master jaws
1 wrench
D
B
E
100
125
160
68
71,5
68,6
20
35
42
C
Solid jaws
17
20
32
2-piece reversible
jaws
40
43
d1 min.
d2 max.
3
3
3
83
125
160
61
3 JAW CHUCKS WITH MORSE TAPER
ROTATING DIVIDING WITH BLOCKING - Type 9184, 9185
Basic indexing:
2, 3, 4, 6, 8, 12, 24
D
Morse Taper
A
B
rpm
Approx. weight [kg]
80
80
100
100
125
125
160
160
2
3
3
4
4
5
4
5
113,9
113,9
123,4
124,9
139,5
139,5
148
148
125
125
3000
3,9
4,1
6,2
6,5
11,0
12,0
18,0
19,0
2500
2000
1800
ROTATING WITH BLOCKING - Type 9186, 9187
D
Morse Taper
A
B
rpm
Approx. weight [kg]
80
80
100
100
125
125
160
160
2
3
3
4
4
5
4
5
109
109
118,5
120
138,5
138,5
147
147
125
125
3200
3200
2800
2800
2500
2500
2200
2200
3,6
3,8
6,0
6,0
11,0
12,0
18,0
18,9
Type 9184, 9186
Type 9185, 9187
Standard
accessories
Example of order: 9186 - 80/2
1 chuck 3274
1 set of outside
hard solid jaws
1 set of inside
hard solid jaws
1 wrench
1 chuck 3275
1 set of hard top
jaws
1 set of hard
master jaws
1 wrench
D
B
E
80
100
125
160
44
50
56
64,5
16
20
32
42
C
Solid jaws
2-piece reversible jaws
13
17
20
32
40
43
d1 min.
d2 max.
2
3
3
3
71
83
125
160
INDEPENDENT CHUCKS WITH MORSE TAPER
ROTATING - Type 4954
D
Morse Taper
A
B
rpm
Approx. weight [kg]
100
125
160
160
4 AE
4 AE
4 AE
5 AE
115
135,5
135,5
135,5
98
115
115
115
3500
3200
2800
2800
6,0
8,0
11,2
12,0
Example of order: 4954-160/4AE
DEAD - Type 4956
D
Morse Taper
125
4 AE
A
rpm
Approx. weight [kg]
72
3200
6,0
Example of order: 4956-125/4AE
D
B
C
E
d1 min.
d2 max.
100
40
17
25
3
100
125
43
20
26
8
125
160
43
20
42
8
160
62
SELF-CENTERING AND INDIVIDUALLY
ADJUSTABLE SCROLL CHUCKS - WESCOTT CHUCKS
Type 4505, 4605, 4705, 4805
Features:
■■ Combines features of both self-centering scroll and independent chuck:
user can adjust chuck once and the self-centering option assures
repeatability throughout the rest of the batch
■■ 4 jaw chuck (type 4605 and type 4805) is able to machine both square
and round workpieces, granting greater flexibility
■■ Steel body (type 4705 and type 4805) extends machine life while
providing higher rigidity and greater wear resistance, enabling the
chuck to withstand higher machining forces
Application:
■■ Particularly suitable for lining up and gripping workpieces of irregular
shape
3 jaw chucks
4 jaw chucks
Steel body
Cast iron body
Steel body
Type 4505
Type 4705
Type 4605
Type 4805
Standard
accessories
Cast iron body
Type
4505, 4605,
4705, 4805
1 set of hard solid jaws
1 wrench
DIN 6351
Chuck size A
B
C
D H6
E
F
G
H
200
250
315
400
500
630
96
102
117
123
145
160
5,5
6
6
6,3
8
10
160
200
260
330
420
545
55
76
103
136
190
252
176
224
286
362
458
586
6xM10
6xM12
6xM16
6xM16
6xM16
6xM16
127
135
158,5
182
206
232
Gripping ranges
Chuck size A
200
250
315
400
500
630
d1 min.
d2 max.
4
5
10
15
20
30
200
250
315
400
500
630
Approx. weight [kg]
18,5
31
54,5
88
150
245
MAIN DIMENSIONS OF HARD SOLID AND SOFT SOLID JAWS
Soft solid jaws
Chuck size
200
250
315
400
500
630
A
B
C
D
E
F
Tr-left hand
H1
H
Approx. weight
[kg]
85
25
58
11
10
12
Tr 18 x 2
25
56
91
28
61
10
10
14
Tr 18 x 2
26,5
60
125
32
73
13,5
12
18
Tr 24 x 3
27
76
145
36
90
12
14
22
Tr 24 x 3
35
98,2
180
40
100
15
14
26
Tr 26 x 3
49,7
119,3
225
50
108
14
14
28
Tr 26 x 3
65
148
0,55
0,76
1,60
1,80
3,85
4,50
Hard solid jaws
63
SELF-CENTERING CHUCKS WITH LARGE THROUGH-HOLE
FOR PIPE MACHINING
Type 3295
3 JAWS, CAST IRON BODY
h
k
c
a
k
b
.
M
W°
.
.
d
E
A
D
F
F1
.
W1°
C
.
M1
.
L
B
Features:
■■ Cast iron body
■■ Chucks may work individually or in pairs, mounted on opposite
sides of the lathe spindle, ensuring the same vertical position
of the jaws in both chucks
■■ Large through-hole compared to the outside diameter of the
chuck body
400
500
660
800
A
B
C
D
E
F
F1
M
M1
W
W1
L
a
b
c
h
400
105
6
362
220
381
6xM12
30°
120
M16
19,04
12,7
168
288
500
57,7
508
120
8
462
320
481,5
6xM16
30°
120
M20
19,04
12,7
250
380
350
75,8
660
135
14
580
406
620
6xM16
30°
127
M20
19,04
12,7
376
497
250
128,9
800
151
7
710
410
460
6xM24
30°
25
225
M20
19,04
12,7
260
566
200
212,0
Standard
accessories
Max. speed
Approx. weight [kg]
min.
max.
rpm
kg
1 set of soft
top jaws
1 set of hard
master jaws
1 wrench
Optional
accessories
Chuck size
d
Type 3295
■■ Able to machine very long workpieces
Application:
■■ Designed for gripping long pipes during machining for
conventional and specialized machine-tools
64
1 set of hard
top jaws
SELF-CENTERING CHUCKS WITH LARGE THROUGH-HOLE
FOR PIPE MACHINING
Type 3597
3 JAW, STEEL BODY (DIN 6350)
M
F
F1
D
E
A
J
C
B
M1
Features:
chuck body
■■ High gripping force
Chuck size
315
405
515
660
800
A
B
C
D
E
F
F1
J
M
M1
315
97
5
260
145
286
286
56,9
3x M16x30
3x M16x100
40 - 140
2500
47
405
110
5
330
220
362
381
67
6x M16x40
6x M12x120
138-406
1000
73
515
120
5
420
320
458
481,5
79
6x M16x40
6x M16x130
264 - 516
800
120
660
140
7
545
406
586
620
87
6x M16x40
6x M16x150
349 - 630
600
230
800
150
7
710
460
760
760
6x M20x50
6x M20x160
260 - 460
700
398
Standard
accessories
Gripping range
Max. speed
Approx. weight [kg]
Type 3597
■■ High machining accuracy
■■ Heavy-duty components
Application:
■■ This chuck is designed for gripping long pipes during mediumduty machining for conventional and specialized machine-tools
mm
rpm
kg
1 set of hard
top jaws
1 wrench
65
HEAVY-DUTY SELF-CENTERING CHUCKS
WITH LARGE THROUGH-HOLE FOR PIPE MACHINING
Type 3515 HD
I
C
H
M
H1
E
F
D
A
B
L
O
R
P
N
Features:
■■ Steel body extends machine life while providing higher
rigidity and greater wear resistance, enabling the chuck to
withstand higher machining forces
■■ Chucks may work individually or in pairs, mounted on
opposite sides of the lathe spindle, ensuring the same
vertical position of the jaws in both chucks
chuck body
Chuck size
Type 3515 HD
Standard
accessories
Short taper
A
B
C
D
E
F
H
H1
I
L
M
N
O
P
R
Gripping range
Gripping force
Max. speed
Approx. weight [kg]
mm
mm
daN
rpm
kg
Application:
■■ This precision chuck, with increased gripping accuracy,
is designed for gripping long pipes during heavy-duty
machining for conventional and specialized machine-tools
Options:
■■ Chuck metric execution available on request
15,1/4"- 64,0" HD
15,1/4"- 85,3" HD
15,3/4"- 115,0" HD
20"- 117,5" HD
25"- 1510,75" HD
25"- 2012,5" HD
6
400
111
87
133,4
103
106,375
135
6x1/2"-13x4,1/2"
50
54
14H10
21
23
10
25 - 400
6200
1400
102,11
8
400
111
87
171,4
136
139,719
135
6x5/8"-11x4,1/2"
50
54
14H10
21
23
10
25 -400
6200
1400
98,32
11
400
111
87
165,1
130
196,869
135
6x3/4"-10x4"
50
54
14H10
21
23
10
25 -400
6200
1400
96,22
11
500
119
87
235
192
196,869
135
169
6x3/4"-10x5"
50
54
14H10
21
23
10
45 - 500
7700
1000
156,46
15
630
144
92,5
330,2
275
285,775
135
210
6x7/8"-9x6"
70
75
22H10
33
37
16
80 - 630
8200
850
278,2
20
630
144
92,5
368,3
320
412,775
135
210
6x1"-8x5"
70
75
22H10
33
37
16
160 - 630
8200
850
251,48
1 set of hard
top jaws
31,1/2"31,1/2"- 20- 12,5"
15- 10,75" HD
HD
15
800
150
92,5
330,2
275
285,775
135
225
6x7/8"-9x6"
70
75
22H10
33
37
16
130 - 800
9000
600
502,2
1 wrench
Example of order: 3515 - 15.1/4"- 6- 4.0" HD
66
20
800
150
92,5
463,5
320
412,775
135
225
6x1"-8x5"
70
75
22H10
33
37
16
180 - 800
9000
600
489,00
HEAVY DUTY INDEPENDENT CHUCKS
Type 4317 HD
I
L
C
B
D
.
E
A
N
.
7° 7
'30"
H
F
K
.
G
■■ Features and applications see page 69
Chuck size
Short taper 1:4
A
B
C
D
E
F
G
H
I
K
L
N
Gripping range
Torque on wrench
Gripping force per jaw
Max. speed
Approx. weight [kg]
mm
mm
Nm
daN
rpm
kg
Chuck size
Short taper 1:4
A
B
C
D
E
F
G
H
I
K
L
N
Gripping range
Torque on wrench
Max. speed
Approx. weight [kg]
mm
mm
Nm
daN
rpm
kg
16"- 85.3" HD
16"- 116.5" HD
20"- 116.5" HD
20"- 158" HD
25"- 1510.5" HD
25"- 2010.5" HD
25"- 2012.5" HD
8
415
139,719
136
171,4
4 x M16x110
21,3
145
154,1
75,7
18
62
19
45-415
350
3200
1200
145
11
415
196,869
168
235,0
4 x M20x110
25,3
145
154,1
75,7
18
62
19
45-415
350
3200
1200
137
11
500
196,869
168
235,0
8 x M20x110
25,4
145
154,1
75,7
22
60
19
45-500
350
3200
1000
204
15
500
285,775
205
330,2
8 x M24x150
31,4
145
154,1
75,7
22
60
19
45-500
350
3200
1000
188
15
630
285,775
270
330,2
8 x M24x160
34,1
155
167,1
90,7
22
75
22
50 - 630
400
3700
850
310
20
630
412,775
270
463,6
8 x M24x160
38,1
155
167,1
90,7
22
75
22
50 - 630
400
3700
850
295
20
630
412,775
320
463,6
8 x M24x160
38,1
155
167,1
90,7
22
75
22
100 - 630
400
3700
850
300
28"- 1510.5" HD
28"- 2012.5" HD
31.1/2"- 1510.5" HD
31.1/2"- 2012.5" HD
31.1/2"- 2014.5" HD
40"- 2820.5" HD
49"- 1511" HD
15
710
285,775
270
330,2
8 x M24x160
34,1
155
167,1
90,7
22
75
22
75 - 710
450
4100
750
415
20
710
412,775
320
463,6
8 x M24x160
38,1
155
167,1
90,7
22
75
22
100 - 710
450
4100
750
395
15
800
285,775
270
330,2
8 x M24x160
34,1
165
177,1
90,7
22
75
22
75 - 800
450
4100
600
585
20
800
412,775
320
463,6
8 x M24x160
38,1
165
177,1
90,7
22
75
22
115 - 800
450
4100
600
565
20
800
412,775
370
463,6
8 x M24x160
38,1
165
177,1
90,7
22
75
22
155 - 800
450
4100
600
545
28
1000
584,225
530
647,6
8 x M30x180
38,8
175
187,1
90,7
28
75
22
350 - 1000
500
4500
430
765
15
1250
285,775
281
330,2
8 x M24x180
28,8
175
187,1
90,7
28
75
22
100 - 1250
500
5000
350
1606
Type 4317 HD
Standard
accessories
Example of order: 4317-28"-15-10.5" HD
1 set of hard sectional jaws
(master+hard top reversible)
1 wrench
Example of order: 4317 - 28"- 15- 10.5" HD
67
Type 4347 HD
H
I
.
.
.
.
.
N
L
C
E
.
.
A
D
B
.
.
7°7
'30
"
.
.
F
K
G
Features:
chuck body
Chuck size
Type 4347 HD
Standard
accessories
Short taper
A
B
C
D
E
F
G
H
I
K
L
N
Gripping range
Torque on wrench
Max. speed
Approx. weight [kg]
mm
mm
Nm
daN
rpm
kg
Application:
designed for gripping long pipes during heavy-duty machining
for conventional and specialized machine-tools
16"- 8- 5,3" HD
16"- 11- 6,5" HD
20"- 8- 5,3" HD
20"- 11- 6,5" HD
28"- 11- 7,5" HD
8
415
139,719
136
171,4
25,4
50,7
145
154,1
75,7
18
60
19
45 - 400
350
3200
1200
136
11
415
196,869
168
235
30,2
60,6
145
154,1
75,7
18
60
19
45 - 400
350
3200
1200
128
8
500
139,719
136
171,4
25,4
50,7
145
154,1
75,7
22
60
19
45 - 500
350
3200
1000
212
11
500
196,869
168
235
30,2
60,6
145
154,1
75,7
22
60
19
45 - 500
350
3200
1000
205
11
710
196,869
192
235
30,2
60,6
155
167,1
90,7
22
75
22
75 - 710
450
4100
750
450
1 wrench
Example of order: 4347 - 28"- 11 - 7.5" HD
68
Type 4307 HD
25
+0,5
4 JAWS, STEEL BODY
91± 0,1
H
I
Ø 25 H8
135
284
E
L
C
230
8 x M16
N
E
A
B
Ø 480
D
3xM12
E
10
G
C-C
D
.
K
Ø 30
E-E
Ø 320
F
.
Features:
■■ Heavy-duty components
Type 4307 HD
Standard
accessories
Gripping range
Torque on wrench
Max. speed
Approx. weight [kg]
Application:
■■ This chuck is designed for gripping long pipes during mediumduty machining for conventional and specialized machine-tools
Chuck size
4307-1000/520-200 HD
4307-1250/520-200 HD
A
B
C
D
E
F
G
H
I
K
L
N
1000
520
200
463,6
8 x M24
31
175
187,1
90,7
28
75
22
50 - 1000
500
5000
430
0642 985
1250
520
200
463,6
8 x M24
31
175
187,1
90,7
28
75
22
50 - 1250
500
5000
350
1560
mm
Nm
daN
rpm
kg
1 wrench
Example of order: 4307- 1000/520-200 HD
69
INDEPENDENT CHUCKS
Type 4302, 4303
4 JAWS, CAST STEEL BODY
Features:
■■ 4 jaw, independent chuck with manual gripping, and a high
quality steel body
■■ 4 jaws ensure the precise centering of square-shaped
workpieces with the maximum permitted gripping force
■■ Chucks with diameters 250 mm and above are equipped with
additional T-slots, permitting the addition of extra jaws
Application:
made for all types of very high precision workshop machining
■■ Suitable for machining square and round workpieces
Options:
Chuck size
200
250
315
400
500
A
B
C
D H7
E
F
G
H
J
L
K
Approx. weight [kg]
200
80
5
110
50
82,6
4xM10
81
40,3
46,4
82
14,0
250
85
7
150
65
104,8
4xM12
96,5
40,3
60,4
96,5
25,0
315
95
7
175
80
133,4
4xM16
111
49,8
60,9
112,5
39,0
400
105
10
200
100
171,4
4xM16
129
49,8
72,3
129
61,0
500
120
12
270
125
235
4xM20
152,5
59,8
90,3
136
105
Chuck size
630
800
915
1000
1250
A
B
C
D H7
E
F
G
H
J
L
K
Approx. weight [kg]
630
140
12
270
160
235
4xM20
177
59,8
97,8
136
163
800
160
12
380
200
330
4xM24
202
70,8
93,8
136
319
915
170
18
370
190
330
8xM24
102,8
160
350
1000
170
18
370
190
330
8xM24
102,8
160
410
1250
190
18
550
190
500
8xM24
102,8
160
950
Type 4303
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4302
Standard
accessories
Other engineering data - see page 79
Example of order: 4302 - 200
70
1 set of soft solid
jaws
1 set of soft solid
top jaws
INDEPENDENT CHUCKS
Type 4304, 4305
4 JAWS, CAST IRON BODY
Features:
■■ 4 jaw, independent chuck with manual gripping, and a high quality cast
iron body
■■ Chuck bodies in sizes up to 160 mm diameter, are made from steel
■■ 4 jaws ensure the precise centering of square-shaped workpieces with
the maximum permitted gripping force
■■ Mounted on the machine-tool spindle from the back of the chuck, using
the adapter plate
Application:
■■ Suitable for machining square and round workpieces on all types of
workshop machining operations on conventional lathes
Options:
Chuck size
85
100
125
160
200
250
315
A
B
C
D H7
E
F
G
H
J
K
L
Approx. weight [kg]
86
40
5
62
25
72
4xM6
34
17
1,9
100
40
2,5
79,38
25
54
4xM8
34
17
2,4
130
43
2,5
69,85
26
54
4xM8
51
20
3,8
156
43
2,5
82,55
42
69,85
4xM10
51
20
4,3
200
80
5
110
50
82,6
4xM10
81
40,3
82
46,4
14,0
250
85
7
150
65
104,8
4xM12
96,5
40,3
96,5
60,4
25,0
315
95
7
175
80
133,4
4xM16
111
49,8
112,5
60,9
39,0
Chuck size
350
400
500
630
800
915
1000
1250
A
B
C
D H7
E
F
G
H
J
K
L
Approx. weight [kg] ca, kg
350
95
7
175
80
133,4
4xM16
111
49,8
47,5
400
105
10
200
100
171,4
4xM16
129
49,8
129
72,3
61,0
500
120
12
270
125
235
4xM20
152,5
59,8
136
90,3
105
630
140
12
270
160
235
4xM20
177
59,8
136
97,8
163
800
160
12
380
200
330
4xM24
202
70,8
136
93,8
319
915
170
18
370
190
330
8xM24
160
102,8
350
1000
170
18
370
190
330
8xM24
160
102,8
410
1250
190
18
550
190
500
8xM24
160
102,8
950
Type 4305
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4304
Standard
accessories
1 set of soft solid
jaws
1 set of soft solid
top jaws
Example of order: 4304 - 85
71
INDEPENDENT CHUCKS
Type 4312, 4313
4 JAWS, CAST STEEL BODY (DIN 55026)
Application:
Options:
Features:
quality steel body
Chuck size
Short taper 1:4
B
D min.
D max.
E
F
G
H
J
K
L
Approx. weight
[kg]
Chuck size
Short taper 1:4
B
D min.
D max.
E
F
G
H
J
K
L
Approx. weight
[kg]
4
63,513
63,526
82,6
4xM10
200
5
80
82,563
82,578
50
104,8
4xM10
81
40,3
82
46,4
250
6
4
5
106,375
106,390
63,513
63,526
82,563
82,578
133,4
4xM12
82,6
8xM10
139,719
139,734
125
171,4
8xM16
630
11
140
196,869
196,887
8
5
85
106,375 139,719
106,390 139,734
65
104,8
133,4
171,4
8xM10 4xM12 4xM16
96,5
40,3
96,5
60,4
17,0
8
6
82,563
82,578
104,8
4xM10
25,5
315
400
500
6
8
6
8
11
6
8
11
15
95
105
120
106,375 139,719 106,375 139,719 196,869 106,375 139,719 196,869 285,775
106,390 139,734 106,390 139,734 196,887 106,390 139,734 196,887 285,795
80
100
100
125
133,4
171,4
133,4
171,7
235
133,4
171,4
235
330,2
8xM12 4xM16 8xM12 4xM16 4xM20 4xM12 8xM16 8xM20 4xM24
111
129
152,5
49,8
49,8
59,8
112,5
129
136
60,9
72,3
90,3
40,0
800
15
8
285,775
285,795
160
235
330,2
8xM20
4xM24
177
59,8
136
97,8
139,719
139,734
125
171,4
4xM16
11
915
15
160
196,869 285,775
196,887 285,795
180
200
235
330,2
8xM20
8xM24
202
70,8
136
93,8
165,0
65
20
412,775
412,802
200
463,6
4xM24
305
11
15
170
196,869 285,775
196,887 285,795
190
235
330,2
8xM20
8xM24
160
102,8
11
196,869
196,887
235
8xM20
315,0
114,0
1000
15
170
285,775
285,795
190
330,2
8xM24
160
102,8
20
11
412,775
412,802
196,869
196,887
463,6
8xM24
235
8xM20
1250
15
190
285,775
285,795
190
330,2
8xM24
160
102,8
395,0
20
412,775
412,802
463,6
8xM24
950
Type 4313
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4312
Standard
accessories
72
1 set of soft solid
jaws
1 set of soft solid
top jaws
INDEPENDENT CHUCKS
Type 4314, 4315
4 JAW, CAST IRON BODY (DIN 55026)
Features:
iron body
Application:
Options:
Chuck size
Short taper 1:4
B
D min.
D max.
E
F
G
H
J
K
L
Approx. weight [kg]
Chuck size
Short taper 1:4
B
D min.
D max.
E
F
G
H
J
K
L
Approx. weight [kg]
4
63,513
63,526
82,6
4xM10
200
5
6
4
80
82,563 106,375 63,513
82,578 106,390 63,526
50
104,8
133,4
82,6
4xM10 4xM12 8xM10
81
40,3
82
46,4
17,0
8
139,719
139,734
125
171,4
8xM16
630
11
140
196,869
196,887
235
8xM20
177
59,8
136
97,8
165,0
250
315
400
500
6
8
6
8
11
6
8
11
15
85
95
105
120
82,563 106,375 139,719 82,563 106,375 139,719 106,375 139,719 196,869 106,375 139,719 196,869 285,775
82,578 106,390 139,734 82,578 106,390 139,734 106,390 139,734 196,887 106,390 139,734 196,887 285,795
65
80
100
100
125
104,8
133,4
171,4
104,8
133,4
171,4
133,4
171,7
235
133,4
171,4
235
330,2
8xM10 4xM12 4xM16 4xM10 8xM12 4xM16 8xM12 4xM16 4xM20 4xM12 8xM16 8xM20 4xM24
96,5
111
111
152,5
40,3
49,8
49,8
59,8
96,5
112,5
129
136
60,4
60,9
72,3
90,3
25,5
40,0
65
114,0
5
6
8
5
800
160
15
8
11
285,775
285,795
139,719
139,734
125
171,4
4xM16
196,869
196,887
180
235
8xM20
330,2
4xM24
160
202
70,8
136
93,8
305
1000
15
20
11
285,775
285,795
200
330,2
8xM24
412,775
412,802
200
463,6
4xM24
196,869
196,887
235
8xM20
170
190
160
102,8
395,0
1250
15
11
285,775
285,795
196,869
196,887
330,2
8xM24
235
8xM20
190
190
160
102,8
950
15
285,775
285,795
330,2
8xM24
Type 4315
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4314
Standard
accessories
1 set of soft solid
jaws
1 set of soft solid
top jaws
73
INDEPENDENT CHUCKS
Type 4332, 4333
Application:
Options:
Features:
quality steel body
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
200
250
315
400
500
6
8
5
6
8
11
5
6
8
11
6
8
11
15
80
85
95
105
120
82,578 106,390 82,578 106,390 139,734 82,578 106,390 139,734 196,887 82,578 106,390 139,734 196,887 106,390 139,734 196,887 285,795
82,563 106,375 82,563 106,375 139,719 82,563 106,375 139,719 196,869 82,563 106,375 139,719 196,869 106,375 139,719 196,869 285,775
50
65
80
79,5
100
100
125
104,8
133,4
104,8
133,4
171,4
104,8
133,4
171,4
235
104,8
133,4
171,4
235
133,4
171,4
235
330,2
4
4
4
4
4
4
4
4
6
4
4
4
6
4
4
6
6
81
96,5
111
129
152,5
40,3
40,3
49,8
49,8
59,8
82
96,5
112,5
129
136
46,4
60,4
60,9
72,3
90,3
16,5
27,5
39,5
60,0
95,5
5
8
139,734
139,719
125
171,4
4
6
5
630
11
140
196,887
196,869
15
285,795
285,775
160
235
6
177
59,8
136
97,8
165,0
330,2
6
8
139,734
139,719
125
171,4
4
800
11
160
196,887
196,869
180
235
6
202
70,8
136
93,8
298,0
915
15
11
15
11
170
285,795
285,775
200
330,2
6
196,887
196,869
285,795
285,775
196,887
196,869
330,2
6
235
6
190
235
6
160
102,8
326,0
1000
15
170
285,795
285,775
190
330,2
6
160
102,8
386,0
1250
20
11
15
190
412,802
412,775
196,887
196,869
463,6
6
235
6
285,795
285,775
190
330,2
6
160
102,8
950
Type 4333
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4332
Standard
accessories
Spare parts - see pages 58 and 80
74
1 set of soft solid
jaws
1 set of soft solid
top jaws
INDEPENDENT CHUCKS
Type 4334, 4335
Features:
iron body
Application:
Options:
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
200
5
80
82,578
82,563
50
104,8
4
81
40,3
82
46,4
16,5
4
63,526
63,513
85
3
6
250
6
85
106,390
106,375
65
133,4
4
96,5
40,3
96,5
60,4
27,5
5
106,390
106,375
82,578
82,563
133,4
4
104,8
4
400
5
82,578
82,563
79,5
104,8
4
6
315
8
5
105
106,390 139,734
106,375 139,719
100
133,4
171,4
4
4
129
49,8
129
72,3
60,0
11
196,887
196,869
235
6
6
106,390
106,375
100
133,4
4
8
11
139,734
139,719
82,578
82,563
106,390
106,375
139,734
139,719
196,887
196,869
171,4
4
104,8
4
133,4
4
171,4
4
235
6
80
111
49,8
112,5
60,9
39,5
11
120
139,734 196,887
139,719 196,869
125
171,4
235
4
6
152,5
59,8
136
90,3
95,5
8
95
500
8
6
15
8
285,795
285,775
139,734
139,719
125
171,4
4
330,2
6
630
11
15
140
196,887 285,795
196,869 285,775
160
235
330,2
6
6
177
59,8
136
97,8
165,0
8
139,734
139,719
125
171,4
4
800
11
160
196,887
196,869
180
235
6
202
70,8
136
93,8
298,0
15
285,795
285,775
200
330,2
6
Type 4335
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4334
Standard
accessories
1 set of soft solid
jaws
1 set of soft solid
top jaws
75
INDEPENDENT CHUCKS
Type 4342, 4343
Features:
quality steel body
Chuck size
Short taper
1:4
B
D max.
D min.
E
F
200
3
4
250
5
6
3
4
Qty. of
mounting
screws
63,526
63,513
82,578 106,390 53,988
82,563 106,375 53,975
50
50
85
104,8
133,4
70,6
70,6
3
3
4
H
J
K
L
Approx.
weight (kg)
4
3
315
5
80
53,988
53,975
63,526
63,513
60
82,6
6
8
5
400
6
8
6
8
500
11
6
8
11
3
6
6
6
6
6
6
6
6
6
6
6
6
96,5
40,3
96,5
60,4
111
49,8
112,5
60,9
129
49,8
129
72,3
59,8
90,3
136
90,3
16,5
27,5
39,5
60,0
95,5
630
8
139,734
139,719
125
171,4
6
800
11
140
196,887
196,869
15
160
235
6
177
59,8
136
97,8
165,0
8
11
915
15
20
11
330,2
6
139,734
139,719
125
171,4
6
196,887
196,869
180
235
6
1000
15
160
285,795
285,775
15
85
95
105
120
82,578 106,390 139,734 82,578 106,390 139,734 106,390 139,734 196,887 106,390 139,734 196,887 285,795
82,563 106,375 139,719 82,563 106,375 139,719 106,375 139,719 196,869 106,375 139,719 196,869 285,775
65
80
100
100
125
104,8
133,4
171,4
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
330,2
81
40,3
82
46,4
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
Application:
Options:
11
170
285,795
285,775
412,802
412,775
196,887
196,869
463,6
6
235
6
200
330,2
6
285,795
285,775
196,887
196,869
330,2
6
235
6
190
202
70,8
136
93,8
298,0
160
102,8
326,0
15
170
285,795
285,775
190
330,2
6
160
102,8
386,0
6
1250
20
11
15
190
412,802
412,775
196,887
196,869
463,6
6
235
6
285,795
285,775
190
330,2
6
160
102,8
950
Type 4343
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4342
Standard
accessories
76
1 set of soft solid
jaws
1 set of soft solid
top jaws
INDEPENDENT CHUCKS
Type 4344, 4345
Features:
iron body
Application:
Options:
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
Chuck size
Short taper 1:4
B
D max.
D min.
E
F
H
J
K
L
Approx. weight [kg]
160
3
54
53,988
53,975
42
70,6
3
51
20
6,0
6
106,390
106,375
133,4
6
200
4
400
8
105
139,734
139,719
100
171,4
6
129
49,8
129
72,3
60,0
3
4
53,988
53,975
63,526
63,513
70,6
3
82,6
3
11
80
50
5
6
3
4
82,578
82,563
106,390
106,375
104,8
6
133,4
6
53,988
53,975
50
70,6
3
63,526
63,513
60
82,6
3
81
40,3
82
46,4
16,5
8
196,887
196,869
139,734
139,719
235
6
171,4
6
500
11
120
196,887
196,869
125
235
6
152,5
59,8
136
90,3
95,5
15
285,795
285,775
330,2
6
8
139,734
139,719
125
171,4
6
250
5
85
82,578
82,563
104,8
6
96,5
40,3
96,5
60,4
27,5
315
6
8
5
6
106,390
106,375
65
133,4
6
139,734
139,719
82,578
82,563
106,390
106,375
171,4
6
104,8
6
133,4
6
630
11
140
196,887
196,869
95
80
8
11
139,734
139,719
196,887
196,869
171,4
6
235
6
111
49,8
112,5
60,9
39,5
800
15
8
11
15
20
285,795
285,775
412,802
412,775
160
285,795
285,775
160
235
6
177
59,8
136
97,8
165,0
330,2
6
139,734
139,719
125
171,4
6
196,887
196,869
180
235
6
200
330,2
6
463,6
6
202
70,8
136
93,8
298,0
Type 4345
1 set of solid jaws
1 set of hard
top jaws
1 wrench
1 set of hard
master jaws
1 wrench
Optional
accessories
Type 4344
Standard
accessories
1 set of soft solid
jaws
1 set of soft solid
top jaws
77
INDEPENDENT CHUCKS
Type 4317 MSP
4 JAWS, STEEL BODY (55026)
Features:
quality steel body
■■
■■ The design of this lathe chuck allows workpieces to be
clamped with a gripping force equal to:
- 20 000 daN per jaw for ø800
- 25 000 daN per jaw for ø1000
Chuck size
Application:
■■ This precision chuck, with increased gripping accuracy, can
be used on machine tools with small gripping diameters for
applications requiring high gripping forces (i.e. for machining
heavy crank shafts, turbine rotors, etc.)
800
1000
Height [mm]
230
265
Max. speed [rpm]
800
600
Gripping force per jaw [daN]
20 000
25 000
110
130
Gripping range [mm]
100-825
100-1025
Approx. total weight (without top jaws) [kg]
800
1400
Type
4317 MSP
Standard
accessories
Torque on wrench [Nm]
1 set of hard top
jaws
1 set of hard master
jaws
1 allen wrench
1 hex wrench
Example of order: 4317 - 800/15 MSP
78
ENGINEERING DATA FOR INDEPENDENT CHUCKS
GRIPPING RANGES
Chuck size
85
100
125
160
200
250
315
350
d1 min.
d2 max.
max. swing diameter
3
85
101
3
100
116
8
125
150
8
160
185
10
200
235
10
250
296
15
315
369
15
350
404
Chuck size
400
500
630
800
915
1000
1250
d1 min.
d2 max.
max. swing diameter
20
400
465
45
500
570
50
630
720
50
800
888
120
915
1003
170
1000
1088
170
1250
1338
Gripping ranges are valid for lathe chucks with reversible jaws. Do not exceed maximum gripping ranges!
MAXIMUM PERMISSIBLE ROTATION SPEEDS * (rpm)
Chuck size
85
100
125
160
200
250
315
350
steel body or cast steel body
cast iron body
4000
-
3800
-
3500
-
3200
-
2500
1800
2000
1500
1500
1200
1500
1200
Chuck size
400
500
630
800
915
1000
1250
steel body or cast steel body
cast iron body
1100
800
700
500
550
400
450
300
200
150
200
150
150
100
* The specified permissible speeds are only applicable for work-pieces not exceeding a specific unbalance of 25 gmm/kg
79
SPARE PARTS FOR INDEPENDENT CHUCKS
HARD SOLID REVERSIBLE JAWS
- SETS
Chuck size
mm
85
100
125
160
200
250
315
350
400
500
630
800
SOFT SOLID JAWS
- SETS
Code No
Chuck size
mm
4 jaw set
0642 985 731 002
0642 985 740 101
0642 985 731 104
0642 985 731 104
0642 985 731 206
0642 985 731 308
0642 985 731 400
0642 985 731 400
0642 985 731 501
0642 985 731 603
0642 985 731 705
0642 985 731 807
85
100
125
160
200
250
315
350
400
500
630
800
200
250
315
400
500
630
800
915
1000
1250
Chuck size
mm
Ø 200 - 800
200
250
315
400
500
630
800
915
1000
1250
Ø 200 - 800
Code No
Chuck size
mm
4 jaw set
0642 985 735 200
0642 985 735 301
0642 985 735 403
0642 985 735 505
0642 985 735 607
0642 985 735 709
0642 985 735 800
0642 985 735 902
0642 985 735 902
0642 985 735 902
HARD 2-PIECE REVERSIBLE JAWS - SETS
4 jaw set
0642 985 730 205
0642 985 730 307
0642 985 730 409
0642 985 730 500
0642 985 730 602
0642 985 730 704
0642 985 730 806
HARD TOP JAWS
- SETS
HARD MASTER JAWS - SETS
Chuck size
mm
Code No
200
250
315
400
500
630
800
915
1000
1250
Ø 915 - 1250
Code No
4 jaw set
0642 985 738 202
0642 985 738 304
0642 985 738 406
0642 985 738 508
0642 985 738 600
0642 985 738 701
0642 985 738 803
0642 985 742 908
0642 985 742 908
0642 985 742 908
Ø 915 -1250
Code No
4 jaw set
0642 985 736 200
0642 985 736 302
0642 985 736 404
0642 985 736 506
0642 985 736 608
0642 985 736 700
0642 985 736 801
0642 985 744 900
0642 985 744 900
0642 985 744 900
OPERATING SCREW
Chuck size
mm
Code No
85
100
125
160
200
250
315
350
400
500
630
800
915
1000
1250
0642 985 732 003
0642 985 732 029
0642 985 732 105
0642 985 732 105
0642 985 732 207
0642 985 732 309
0642 985 732 400
0642 985 740 509
0642 985 732 502
0642 985 732 604
0642 985 732 706
0642 985 732 808
0642 985 740 702
0642 985 740 804
0642 985 740 906
SAFETY WRENCH
THRUST BEARING
Chuck size
mm
Code No
85
100
125
160
200
250
315
350
400
500
630
800
915
1000
1250
0642 985 733 004
0642 985 733 020
0642 985 733 106
0642 985 733 106
0642 985 733 208
0642 985 733 300
0642 985 733 401
0642 985 733 401
0642 985 733 503
0642 985 733 605
0642 985 733 707
0642 985 733 809
0642 985 733 900
0642 985 733 900
0642 985 733 900
for chucks type 4500, 4600, 4700, 4800
Chuck size
mm
Code No
Code No
mm
For chucks type
4500, 4600,
4700, 4800
For chucks type
4300
85
100
125
160
200
250
315
400
500
630
800
915
1000
1250
0642 985 754 001
0642 985 754 014
0642 985 754 103
0642 985 754 205
0642 985 754 307
0642 985 754 307
-
0642 985 340 102
0642 985 340 102
0642 985 344 106
0642 985 344 106
0642 985 344 208
0642 985 344 208
0642 985 344 300
0642 985 344 300
0642 985 344 401
0642 985 344 401
0642 985 344 503
0642 985 344 503
0642 985 344 503
0642 985 344 503
80
MAIN DIMENSIONS OF ONE-PIECE
& TWO-PIECE REVERSIBLE JAWS
One-piece solid reversible jaws
Szczęka jednolita
Soft solid jaws
ø 200 - 800
Szczęka jednolita miękka
ONE-PIECE SOLID REVERSIBLE JAWS
Chuck size
85
100
125
160
200
250
A
B
C
D
E
F
H1
H
Tr-left hand
Approx. weight [kg]
34
13
30
4,5
5
7
8
17,5
Tr 16x2
0,1
34
13
30
4,5
5
7
8
17,5
Tr 16x2
0,1
51
16
34,5
6
5
8
12,5
31,5
Tr 18x4
0,12
51
16
34,5
6
5
8
12,5
31,5
Tr 18x4
0,12
81
32
63
8,7
10
14
17,5
48,5
Tr 28x5
0,72
96,5
32
63
8,7
10
14
23
59
Tr 28x5
1,3
Chuck size
315
350
400
500
630
800
A
B
C
D
E
F
H1
H
Tr-left hand
Approx. weight [kg]
111
40
76,5
9,7
12
18
27
67
Tr 32x6
1,5
111
40
76,5
9,7
12
18
27
67
Tr 32x6
1,5
129
40
76,5
9,7
12
18
32,5
78,5
Tr 32x6
1,8
152,5
52
93,5
11,7
15
22
35
93
Tr 36x6
3,4
177
52
93,5
11,7
15
25
45
109
Tr 40x6
4,0
202
70
114,5
15,7
20
25
44
122
Tr 44x8
7,8
Hard master jaws
HARD MASTER JAWS
Chuck size
A
B
C
D
E
F-0,03
G+0,01
H
J
K
L
Szczęka podstawowa
Hard top jaws
M
Tr-left hand
Approx. weight [kg]
200
250
315
400
500
630
800
915
1000
1250
79
94
110
129
168
206
206
244
244
244
32
32
40
40
52
52
70
70
70
70
32
38
39
44
59
59
59
59
59
59
8,7
8,7
9,7
9,7
11,7
11,7
15,7
15,7
15,7
15,7
10
10
12
12
15
15
20
20
20
20
7,94
12,7
12,7
12,7
12,7
12,7
12,7
12,7
12,7
12,7
12,69
19,04
19,04
19,04
19,04
19,04
19,04
19,04
19,04
19,04
33,2
37,5
45,4
54,9
55,5
55,5
55,5
55,5
55,5
55,5
4
4
4
7,2
7,2
7,2
7,2
7,2
7,2
7,2
22,25
27
31,75
38,1
38,1
38,1
38,1
38,1
38,1
38,1
14
20
17,5
22
33,5
33,5
33,5
33,5
33,5
33,5
M10
M12
M12
M16
M20
M20
M20
M20
M20
M20
3/8”-16 1/2”-13 1/2”-13 5/8”-11 3/4”-10 3/4”-10 3/4””-10 3/4”-10 3/4”-10 3/4”-10
Tr 28x5 Tr 28x5 Tr 32x6 Tr 32x6 Tr 36x6 Tr 40x6 Tr 44x8 Tr 44x6 Tr 44x6 Tr 44x8
0,6
0,9
1,1
1,2
1,5
2,4
2,4
5,4
5,4
5,4
HARD TOP JAWS
ø 200 - 800
ø 1000 - 1250
Chuck size
200
250
315
400
500
630
800
915
1000
1250
A
B
C
D
E
F-0,03
G + 0,01
H
J
K
L
M
N
0
P
R
Approx. weight [kg]
82
34
43,5
7,95
4
3,2
12,69
35,2
11
18
21,5
22,25
9,5
22
53
19,3
0,5
96,5
34
51,5
12,71
4
3,2
19,04
40
14
20
26,5
27
12
25
62
22,5
0,7
112,5
42
55
12,71
4
3,2
19,04
47,9
14
20
27,5
31,75
13
27
70,5
25,7
1,3
129
42
64,5
12,71
4
6,3
19,04
57,4
18
26
32
38,1
13,5
26,5
79
28,8
2,1
136
54
74,5
12,71
4
6,3
19,04
58
22
33
39,5
38,1
18
37,5
87
29,4
3,0
136
54
82
12,71
4
6,3
19,04
58
22
33
43
38,1
21
37,5
87
29,4
3,0
136
72
88
12,71
4
6,3
19,04
58
22
33
46
38,1
24
40
89
29,4
4,2
160
72
97
12,71
4
6,3
19,04
58
22
33
71
38,1
50
60
29,4
4,2
160
72
97
12,71
4
6,3
19,04
58
22
33
71
38,1
50
60
29,4
4,2
160
72
97
12,71
4
6,3
19,04
58
22
33
71
38,1
50
60
29,4
4,2
81
SELF-CENTERING WEDGE BAR CHUCKS
Type 3404, 3414, 3434, 3444
Application:
■■ This precision chuck, with increased
gripping accuracy, is designed for turning
work demanding high concentricity, reliable
repeatability and high gripping force
Options:
Features:
■■ Jaw locking system
■■ Hardened and ground jaw guides ensure
longer life with maintained accuracy and
repeatability
■■ Steel body extends machine life while
providing higher rigidity and greater wear
resistance, enabling the chuck to withstand
■■ Hard solid jaws or hard two-piece jaws
Standard accessories:
■■ 1 set of hard solid jaws
■■ 1 wrench
■■ 1 set of mounting screws
Optional accessories:
■■ 1 set of hard top jaws
Jaw weight in dimension tables; Spare parts - see page 85; Engineering data - see page 84
SELF-CENTERING 3 JAW WEDGE BAR CHUCKS, HARD SOLID JAWS
Chuck size
Short taper
1:4
125
160
200
250
315
-
125
125
160
160
200
200
250
250
315
315
3
4
4
5
5
6
6
8
8
11
B
Approx.
weight [kg]
67
84
97
112
127
5,6
11,8
20
36
60
70
74
84,5
92
99
105
117
122
136
139
5,9
6,3
11,4
13
21,4
22,8
35,5
36,7
64
66,5
Type 3404
DIN 55027
Chuck size
Short taper
1:4
160
160
200
200
250
250
315
315
4
5
5
6
6
8
8
11
125
125
160
160
200
200
250
250
315
315
3
4
4
5
5
6
6
8
8
11
DIN 55026
Type 3434
B
Approx.
weight [kg]
84,5
92
99
105
117
122
136
139
11
13
21
22
35,5
36,7
64
65,5
Type 3414
DIN 55029
Type 3444
70
74
84,5
92
99,5
105
126
129
142
144
5,9
6,3
11,4
13
21,4
22,8
39
40,3
66
68
MAIN DIMENSIONS OF WEDGE BAR CHUCKS
Chuck size
125
160
200
250
315
A
B
C
D
E
F
G
H
J
K
L
M
N
S
130
67
4
95
30
108
3xM8
16
51,5
35,5
150
9
125
5,2
165
84
5
125
40
140
3xM10
17
65
45,5
200
11
130
5,2
205
97
5
160
51
176
3xM12
20
73,5
56,5
290
14
149
5,6
252
112
6
200
66
224
3xM16
24
84,5
72
440
16
173
6,2
315
127
6
260
90
286
3xM18
30
95,5
88
500
18
219
9,1
82
MAIN DIMENSIONS FOR WEDGE BAR CHUCK JAWS
HARD SOLID JAWS
ø 125
Szczęka górna twarda
ø 160-315
Chuck size
125
160
200
250
315
A
B
C
D
E
F
G
H
J
a
b
Approx. weight [kg]
58
14
40
6,5
7
7
16
32
48
8
12
0,4
69
20
45
7,5
9
8
26
58
10
12
1,0
90
22
50
8
9
11,5
33
72,5
12
15
1,5
108,5
26
60
10
11
14
36
83
15
20
2,6
132
32
70
12
14
17
41,5
104,5
20
20
4,4
HARD TOP JAWS
ø 125
Szczęka górna miękka
ø 160-315
ø 125
Chuck size
125
160
200
250
315
A
B h11
C
D H9
E
F
G h7
H
J
K
L
M
N
0
P
R
S
Approx. weight [kg]
59
20
36
14
1,5
5
5
26
6,4
10,4
6
10
7
16
31
18,5
47
0,18
63
20
37
8
3
4,5
18
23
8,4
13,5
9
16
7,5
27
40
16
0,25
72,5
22
43,5
10
3,5
5
20
27
8,4
13,5
9
20
9,5
33
58
17
91
30
55
12
3,5
5
20
30
13
19
7
20
14
40,5
81
20
0,50
105
35
60
12
6,5
5
26
35,3
13
19
15,5
27
15
40
95
21
0,80
0,35
HARD MASTER JAWS
ø 160-315
Chuck size
125
160
200
250
315
A
B
C
D
E
F
G H7 1)
H
J
K
L
M
S
Approx. weight [kg]
51,5
14
21,5
6,5
7
5
25,75
3
10
10
M6
0,3
65
20
26,5
7,5
9
8
18
28
5
32
12
M8
2,5
0,6
85
22
28,5
8
9
10
20
42
5,5
40
12
M8
2,5
0,9
87,5
26
36
10
11
12
20
41,5
5,5
40
17
M12
3
1,8
125
32
42
12
14
12
26
69
7
54
17
M12
3
3,0
1) H7 without chuck size 125 mm
ø 125
SOFT TOP JAWS
ø 160-315
Chuck size
125
160
200
250
315
A
B
C
D H9
E
F
G h7
H
J
K
L
M
Approx. weight [kg]
55
20
30
14
1,5
5
5
25
6,4
10,4
24
20
0,6
85
20
40
8
4,5
3
18
35
8,4
13,5
26,5
32
1,2
105
22
50
10
5
3
20
40
8,4
13,5
35
40
2,1
125
30
55
12
5
3,5
20
60
13
19
41
40
4,2
145
35
60
12
6
3,5
26
60
13
19
38
54
6,2
83
ENGINEERING DATA FOR WEDGE BAR CHUCKS
GRIPPING RANGES
Chuck size
125
160
200
250
315
d1
d2
d3
d4
d5
max. swing diameter
4-29
38-63
100-125
28-53
100-125
151
4-90
61-150
90-160
34-120
90-160
212
5-105
70-170
100-200
49-149
100-200
264
8-130
81-170
120-250
66-188
128-250
322
10-155
95-189
152-315
74-200
142-315
393
MAXIMUM PERMISSIBLE ROTATION SPEEDS (rpm)
Chuck size
125
160
200
250
315
max. rpm
6000
5400
4600
4200
3300
TOTAL GRIPPING FORCE
Chuck size
125
160
200
250
Torque on wrench [Nm]
Total gripping force [daN]
40
3000
100
6000
160
8500
200
11000
250
13000
BALANCE VALUE
Chuck size
125
160
200
250
315
gcm
16
32
63
125
250
CENTERING ACCURACY
Chuck size
d
l
w
125
160
200
250
315
14
20
29
60
95
125
14
20
39
60
95
160
14
22
50
80
125
200
15
32
64
80
180
245
20
64
89
120
189
290
0,015
0,010
0,015
0,015
0,010
0,015
0,015
0,010
0,015
0,015
0,010
0,015
0,020
0,010
0,020
Centering accuracy (mm)
a
b
c
84
SPARE PARTS FOR WEDGE BAR CHUCKS
HARD SOLID JAWS - SETS
Code No 0642 985
Chuck size
mm
3 jaws - set
0642 985 309 108
0642 985 309 200
0642 985 309 301
0642 985 309 403
0642 985 309 505
125
160
200
250
315
SOFT TOP JAWS - SETS
Code No
Chuck size
mm
3 jaws - set
0642 985 310 301
0642 985 310 403
0642 985 310 505
0642 985 310 607
0642 985 310 709
125
160
200
250
315
SOFT 2-PIECE JAWS - SETS
Code No
Chuck size
mm
3 jaws - set
0642 985 312 700
0642 985 312 802
0642 985 312 904
0642 985 312 920
0642 985 312 945
125
160
200
250
315
HARD MASTER JAWS - SETS
Code No
Chuck size
mm
3 jaws - set
0642 985 309 709
0642 985 309 800
0642 985 309 902
0642 985 310 006
0642 985 310 108
125
160
200
250
315
HARD TOP JAWS - SETS
Code No
Chuck size
mm
3 jaws - set
0642 985 310 813
0642 985 310 826
0642 985 310 839
0642 985 310 841
0642 985 310 854
125
160
200
250
315
HARD 2-PIECE REVERSIBLE JAWS - SETS
Chuck size
mm
125
160
200
250
315
Code No
3 jaws - set
0642 985 312 100
0642 985 312 201
0642 985 312 303
0642 985 312 405
0642 985 312 507
85
FULLY-MACHINED ADAPTER PLATES
Type 8210
Type 8230
Type 8240
■■ Cast-iron adapters for plain back self-centering chucks
■■ For mounting instructions, see chuck service manual
DIN 55026 - Typ 8210
DIN 55026 - Type 8210
DIN 55027 - Typ 8230
DIN 55027 - Type 8230
Size
mm
Short taper
1:4
A
mm
100
125
125
160
160
160
200
200
200
200
250
250
250
315
315
315
400
400
400
500
500
500
630
630
630
3
3
4
3
4
5
3
4
5
6
5
6
8
6
8
11
6
8
11
8
11
15
8
11
15
100,5
125,5
125,5
160,5
160,5
160,5
201
201
201
201
251
251
251
316
316
316
402
402
402
502
502
502
633
633
633
Size
mm
Short taper
1:4
100
125
125
160
160
160
160
200
200
200
200
200
250
250
250
250
315
315
315
400
400
400
500
500
500
630
630
630
3
3
4
3
4
5
6
3
4
5
6
8
4
5
6
8
6
8
11
6
8
11
8
11
15
8
11
15
B
mm
B
mm
Type 8210
Type 8230
18,5
18,5
18,5
18,5
21
21
21
21
21
21
21
26
26
33
33
33
33
33
33
34
34
34
42
42
42
16,5
18,5
18,5
21
21
21
21
21
21
21
21
21
26
33
33
33
33
33
33
34
34
34
42
42
42
A
mm
Approx. weight [kg]
1,6
2,4
2,4
4,3
4,3
4,3
7,0
7,0
7,0
7,0
11,0
11,0
18,0
18,0
18,0
18,0
36,0
36,0
36,0
60,0
60,0
60,0
105,0
105,0
105,0
B
mm
Approx. weight [kg]
26
26
26
27
27
30
36,5
27
27
30
36,5
40
28
30
36,5
39
39,5
42
47
36,5
39
47
39
47
50
39
47
50
1,6
2,4
2,4
4,3
4,3
4,3
4,3
7,0
7,0
7,0
7,0
7,0
11,0
11,0
18,0
18,0
18,0
18,0
18,0
36,0
36,0
36,0
60,0
60,0
60,0
105,0
105,0
105,0
Type 8240
DIN 55029 - Type 8240
100,5
125,5
125,5
160,5
160,5
160,5
160,5
201
201
201
201
201
251
251
251
251
316
316
316
402
402
402
502
502
502
633
633
633
86
fully machined adapter plates for CHUCKS with
fine adjustment type 3564, 3565 and 3864, 3865
DIN 55027 - Type 8235
BAYONET
Size
mm
A
mm
B
B1
100
105
125
125
130
3
4
3
4
5
3
4
5
4
5
6
5
6
8
6
8
11
6
8
11
8
11
15
8
11
15
31
31
33
33
35
32
32
37
33
33
40
38
38
43
43
43
50
35
37
37
36
36
52
36
36
52
12
12
14
14
14
16
16
16
17
17
17
19
19
19
19
19
19
-
G
K
Short
taper
1:4
C
D
E
F
G
H
Approx.
weight [kg]
20
20
35
35
35
42
42
42
55
55
55
76
76
76
103
103
103
103
135,8
120
136
192,8
190
136
192,8
252
75
85
75
85
104,8
75
85
104,8
85
104,8
133,4
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
171,4
235
235
171,4
330,2
330,2
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M12
M12
M12
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
83
83
108
108
108
140
140
140
176
176
176
224
224
224
286
286
286
171,4
171,4
171,4
235
235
235
330,2
330,2
330,2
1,3
1,2
1,8
1,7
1,8
2,8
2,8
3,0
4,0
4,4
5,3
8,4
7,9
10,3
12,9
15,0
17,9
12,8
15,0
17,0
31,5
29,6
39
31,5
29,6
34
Type 8235 DIN 55027
125
160
160
200
200
250
250
315
315
400
298,45
G
A
E
C
F
H
100
500
407
Wielkość
B
630
407
B1
B
Wielkość
E
H
A
F
Ø 100ø100
- 315 ÷ ø315
ø400
Ø 400
- 630÷ ø630
45
45
55
55
55
86
86
86
110
110
110
145
145
145
180
180
180
298,45
298,45
298,45
407
407
407
407
407
407
53,975
63,513
53,975
63,513
82,563
53,975
63,513
82,563
63,513
82,563
106,375
82,563
106,375
139,719
106,375
139,719
196,869
106,375
139,719
196,869
139,719
196,869
285,775
139,719
196,869
285,775
CAMLOCK
DIN 55029 - Type 8245
Size
mm
A
mm
Short
taper
1:4
100
100
108
3
4
3
4
5
3
4
5
6
3
4
5
6
4
5
6
8
6
8
11
6
8
11
8
11
15
8
11
15
B
B1
38
40
40
39
44
46
46
46
51
33
33
47
51
38
38
53
60
38
57
64
35
38
48
36
36
52
36
36
52
12
12
14
14
14
16
16
16
16
17
17
17
17
19
19
19
19
19
19
19
-
C
D
E
F
G
H
Approx.
weight
[kg]
20
20
35
35
35
42
42
42
42
51,4
55
55
55
60,5
76
76
76
103
103
103
103
136,1
136
136
192,8
190
136
192,8
252
70,6
82,6
70,6
82,6
104,8
70,6
82,6
104,8
133,4
70,6
82,6
104,8
133,4
82,6
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
171,4
235
330,2
171,4
235
330,2
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
83
83
108
108
108
140
140
140
140
176
176
176
176
224
224
224
224
286
286
286
171,4
171,4
171,4
235
235
235
330,2
330,2
330,2
1,5
1,8
2,7
2,6
3,1
4,9
4,5
4,5
5,9
4,7
4,7
7,2
8,0
8,6
8,0
12,9
14,7
12,9
21,7
24,0
11,7
11,9
17,5
33,5
35,3
37,8
33,5
35,3
32,8
E
C
A
F
H
Type 8245 DIN 55029
125
125
G
135
160
B1
B
170
Wielkość
200
250
250
315
315
400
298,45
500
407
630
407
E
200
G
A
ø100 ÷ ø315
Ø 100 - 315
F
H
160
B
Ø 400 - 630
45
45
55
55
55
86
86
86
86
110
110
110
110
145
145
145
145
180
180
180
183
227
297
407
407
407
407
407
407
53,975
63,513
53,975
63,513
82,563
53,975
63,513
82,563
106,375
53,975
63,513
82,563
106,375
63,513
82,563
106,375
139,719
106,375
139,719
196,869
106,375
139,719
196,869
139,719
196,869
285,775
139,719
196,869
285,775
87
fully machined adapter plates for CHUCKS with
fine adjustment type 3564, 3565 and 3864, 3865
FORM A MOUNTING
DIN 55026 - Type 8215
Short
taper
1:4
B
B1
C
100
100
105
125
125
160
160
200
200
250
250
315
315
400
298,45
500
407
630
407
3
4
4
5
3
4
5
6
4
5
6
5
6
8
6
8
11
6
8
11
8
11
15
8
11
15
40
40
36
36
45
45
37
42
33
33
45
38
38
46
38
46
55
35
37
48
36
36
52
36
36
52
12
12
14
14
16
16
16
16
17
17
17
19
19
19
19
19
19
-
45
45
55
55
86
86
86
86
110
110
110
145
145
145
180
180
180
298,45
298,45
298,45
407
407
407
407
407
407
E
C
F
H
A
B1
B
N
E
F
H
A
G
Ø 100 - 315
D
E
F
G
H
K
Approx.
weight
[kg]
70,6
82,6
82,6
104,8
70,6
82,6
104,8
133,4
82,6
104,8
133,4
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
171,4
235
330,2
171,4
235
330,2
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
83
83
108
108
140
140
140
140
176
176
176
224
224
224
286
286
286
171,4
171,4
171,4
235
235
235
330,2
330,2
330,2
14
14
22
22
20
29
21
26
16
16
28
19
19
26
19
27
36
35
29
27
36
36
52
36
36
52
1,6
1,5
2,2
1,9
4,4
4,4
3,1
3,3
4,4
4,2
6,2
7,8
7,9
9,2
12,3
16,0
18,7
14,3
12,8
16,2
31,5
27,6
34,6
31,5
27,6
29,6
Type 8215 DIN 55026
G
K
A
mm
Size
mm
53,975
63,513
63,513
82,563
53,975
63,513
82,563
106,375
63,513
82,563
106,375
82,563
106,375
139,719
106,375
139,719
196,869
106,375
139,719
196,869
139,719
196,869
285,775
139,719
196,869
285,775
20
20
35
35
42
42
42
42
55
55
55
76
76
76
103
103
103
136
136
136
136
192,8
190
136
192,8
252
B
Ø 400 - 630
SEMI-FINISHED ADAPTER PLATES
■■ Cast-iron adapters for plain back self-centering and independent chuck, rough on the chuck side (for mounting instructions, see
the chuck service manual)
DIN 55026 and DIN 55027
Size
mm
Short taper
1:4
A
mm
100
125
125
160
160
160
200
200
200
250
250
250
315
315
315
400
400
500
500
630
630
800
800
3
3
4
3
4
5
4
5
6
5
6
8
6
8
11
8
11
8
11
11
15
11
15
102
127
127
162
162
162
203
203
203
253
253
253
318
318
318
405
405
505
505
635
635
385
408
DIN 55026 and DIN 55027
DIN 55026
Type 8212
DIN 55026
Typ 8212
DIN 55027
Type 8232
DIN 55027
Typ 8232
DIN 55029
Type 8242
B
mm
B
mm
B
mm
Type 8212
Type 8232
Type 8242
18
19,5
19,5
24
24
38
33
33
50
46
33
55
55
43
75
45
45
45
56
45
45
18
19,5
19,5
24
24
38
33
33
50
46
33
55
47
43
47
45
45
45
56
45
45
28
50
30
50
55
35
44
50
35
49
49
49
70
55
55
70
50
46
72
72
60
50
55
88
Approx. weight [kg]
1,8
2,4
2,4
4,2
4,2
4,2
12,0
12,0
12,0
16,0
16,0
16,0
22,0
22,0
22,0
42,0
42,0
72,0
72,0
105,0
105,0
130,0
130,0
B3
N
M
FULLY-FINISHED ADAPTER PLATES
400 ÷ 630
A
K
G
TYPE 8210-X
D
F
1:4
S
P1
.
.
B2
.
P
B1
B
DIN 55026
■■ Fully finished cast-iron adapters for plain back self-centering chucks, suitable for direct mounting on spindle nose type A
FORM A MOUNTING
Size
Short
taper
1:4
A
mm
B
B1
B2
B3
D
3
3
4
3
4
5
6
3
4
5
6
4
5
6
100
22
2,5
125
22
3,5
14
14
13
14
10
-
21
70,6
70,6
82,6
70,6
82,6
104,8
133,4
70,6
82,6
104,8
133,4
82,6
104,8
133,4
51,4
51,4
60,9
51,4
60,9
79,5
103
51,4
60,9
79,5
103
60,9
79,5
103
3
13
70,6
51,4
4
5
6
5
6
8
5
6
8
6
8
11
6
8
11
8
8
11
15
8
11
15
12
17
19
12
19
24
17
19
24
19
22
32
21
20
30
20
20
30
32
22
24
36
82,6
104,8
133,4
104,8
133,4
171,4
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
171,4
171,4
235
330,2
171,4
235
330,2
60,9
79,5
103
79,5
103
138,1
79,5
103
136,1
103
136,1
192,8
103
136,1
192,8
136,1
136,1
192,8
281,4
136,1
192,8
281,4
F
G(h4)
K
M
N
P
P1
S
Approx.
weight [kg]
70
83
3xM10
-
108
3x8,4
-
3xM8
95
3x13,5
-
3xM8
3xM10
-
6x16,5
6x10,5
-
-
3x16,5
3x10,5
-
-
6x16,5
6x10,5
6xM12
0,766
1,362
1,249
2,392
2,24
1,94
1,567
3,235
3,09
2,784
2,69
3,884
3,57
3,09
3xM10
7,092
Type 8210-X
100
125
160
180
200
230
250
270
315
400
450
500
630
160
22
3,5
15
19,5
12
180
22
3,5
25
200
230
22
28
21
3,5
4,5
250
28
4,5
270
28
4,5
315
33
4,5
38
400
36
15
4,5
450
40
4,5
500
36
4,5
630
42
6
15
10
10
10
12
12
12
16
16
17
17
16
19
3xM10
125
145
160
191
140
160
176
208
3x19
3x13
3xM10
6xM10
-
3xM12
3xM10
3xM10
6xM10
-
6xM12
3xM10
3xM12
200
224
6x19
6x13
3xM12
228
246
3x19
3x13
3xM12
260
286
6x25
6x17
-
-
3xM16
330
362
6x25
6x17
6xM16
386
415
6x25
6x17
3xM16
420
458
6x25
6x17
6xM16
545
586
6x25
6x17
6xM16
6xM10
-
-
6xM10
6xM12
6xM10
6xM12
6xM16
6xM10
6xM12
6xM16
6xM12
6xM16
6xM18
6xM12
6xM16
6xM18
6xM16
6xM16
6xM18
6xM22
6xM16
6xM18
6xM22
-
-
-
3xM16
3xM16
3xM16
3xM16
6,904
6,617
5,94
7,724
7,07
5,93
9,597
8,92
7,784
14,637
13,19
11,832
27,665
26,03
22,33
38,54
43,38
39,66
31,65
83,978
79,47
79,08
Example of order: 8210-250/5-X
89
B3
400 ÷ 630
N
M
B1
A
G
K
.
S
P
F
TYPE 8230-X
D
1:4
B2
B
DIN 55027
■■ Fully finished cast-iron adapters for plain back self-centering chucks, suitable for direct mounting on BAYONET spindle nose
BAYONET
Size
Short
taper
1:4
A
mm
B
B1
B2
D
3
3
4
3
4
5
6
3
4
5
6
3
4
5
6
4
5
6
5
6
8
5
6
8
6
8
11
6
8
11
8
11
8
11
15
8
11
15
100
22
2,5
125
22
3,5
160
22
3,5
180
22
3,5
200
22
3,5
230
28
4,5
250
28
4,5
270
28
4,5
315
33
4,5
400
36
4,5
450
40
4,5
500
36
4,5
630
42
6
34
34
39
34
39
43
50
34
39
43
50
34
39
43
50
39
43
50
43
50
60
43
50
60
50
60
75
50
60
75
60
75
60
75
90
60
75
90
70,6
70,6
82,6
70,6
82,6
104,8
133,4
70,6
82,6
104,8
133,4
70,6
82,6
104,8
133,4
82,6
104,8
133,4
104,8
133,4
171,4
104,8
133,4
171,4
133,4
171,4
235
133,4
171,4
235
171,4
235
171,4
235
330,2
171,4
235
330,2
F
G(h4)
K
M
N
P
S
Approx.
weight [kg]
70
83
3x13,5
3x8,4
6xM8
-
95
108
3x13,5
3x8,4
6xM8
-
125
140
6x16,5
6x10,5
6xM10
-
154
160
3x16,5
3x10,5
6xM10
-
160
176
6x16,5
6x10,5
6xM10
-
191
208
3x19
3x13
6xM12
-
200
224
6x19
6x13
6xM12
-
228
246
3x19
3x13
6xM12
-
260
286
6x25
6x17
6xM16
-
330
362
6x25
6x17
6xM16
3xM16
386
415
6x25
6x17
6xM16
3xM16
420
458
6x25
6x17
6xM16
3xM16
545
586
6x25
6x17
6xM16
3xM16
0,91
1,56
1,424
2,58
2,464
2,23
1,88
3,43
3,304
3,08
2,74
4,21
4,094
3,86
3,55
7,234
6,92
6,44
8,05
7,57
6,71
9,9
8,62
8,56
15,13
14,02
12,18
28,163
26,893
24,703
39,373
36,733
44,253
42,063
35,661
84,763
81,893
74,021
Type 8230-X
100
125
160
180
200
230
250
270
315
400
450
500
630
51,4
51,4
60,9
51,4
60,9
79,5
103
51,4
60,9
79,5
103
51,4
60,9
79,5
103
60,9
79,5
103
79,5
103
136,1
79,5
103
136,1
103
136,1
192,8
103
136,1
192,8
136,1
192,8
136,1
192,8
281,4
136,1
192,8
281,4
90
B3
400 ÷ 630
N
M
B1
A
K
S
P
F
TYPE 8240-X
G
1:4
B2
B
DIN 55029
■■ Fully finished cast-iron adapters for plain back self-centering chucks, suitable for direct mounting on CAMLOCK spindle nose
CAMLOCK
Size
Short
taper
1:4
A
mm
B
B1
B2
F
4
3
4
5
5
3
4
5
6
5
6
5
6
8
6
8
6
8
11
8
11
8
11
8
11
11
15
125
26
3,5
32,2
30,8
32,2
38,2
38,2
30,8
32,8
38,2
44,2
38,2
44,2
38,2
44,2
50,7
44,2
50,7
44,2
50,7
60,6
50,7
60,6
50,7
60,6
50,7
60,6
60,6
69,6
60
51,4
60
79,5
79,5
51,4
60
79,5
103
79,5
103
79,5
103
136,1
103
136,1
103
136,1
192,8
136,1
192,8
136,1
192,8
136,1
192,8
192,8
281,4
K
M
N
P
S
Approx.
weight [kg]
95
108
3x13,5
3x8,4
6xM8
-
125
140
6x16,5
6x10,5
6xM10
-
145
160
3x16,5
3x10,5
6xM10
-
160
176
6x16,5
6x10,5
6xM10
-
191
208
3x19
3x13
6xM12
-
200
224
6x19
6x13
6xM12
-
228
246
3x19
3x13
6xM12
-
260
286
6x25
6x17
6xM16
-
330
362
6x25
6x17
6xM16
3xM16
386
415
6x25
6x17
6xM16
3xM16
420
458
6x25
6x17
6xM16
3xM16
545
586
6x25
6x17
6xM16
3xM16
1,56
3,07
2,911
2,962
4,159
5,077
4,944
4,745
5,94
6,876
7,502
8,605
8,724
9,393
10,436
10,528
17,376
15,936
16,304
27,353
27,431
39,627
42,84
45,405
44,531
74,48
70,339
G(h4)
Type 8240-X
125
160
180
200
230
250
270
315
400
450
500
630
160
180
27
30
30
3,5
3,5
27
200
230
250
270
315
400
450
500
630
30
36,5
30
36,5
30
36,5
39
36,5
39
39
47
39
47
40
47
39
47
47
50
3,5
4,5
4,5
4,5
4,5
4,5
4,5
4,5
6
91
MACHINE SPINDLE NOSES
DIN 55026 Type A Type B - ISO 702/I Type A2 Type A1-A2
B
A 1-A 2
C1
D
C2
E1
7° 7' 30''
F2
E1
E1
E2
B
A
F1
B
A
7° 7' 30''
F1
E1
A
A2
From taper 4
D
Spindle nose
size
A
B max.
C1
C2
D
E1
F1
E2
F2
3
4
5
6
8
92
108
133
165
210
53,983
63,521
82,573
106,385
139,731
11
11
13
14
16
14,288
15,875
17,462
16
20
22
25
28
70,6
82,6
104,8
133,4
171,4
280
196,,883
18
19,05
35
15
380
285,791
19
20,638
42
20
28
520
725
412,795
584,248
21
24
22,225
25,400
48
56
8xM10
8xM12
8xM16
8xM20
(8xM18)
11xM24
(11xM22)
11xM24
11xM30
61,9
82,6
111,1
11
3xM10
11xM10
11xM10
11xM12
11xM16
11xM20
(11xM18)
12xM24
(12xM22)
12xM24
12xM30
235
330,2
463,6
647,6
165,1
247,6
368,3
530,2
Type A: Tapped holes in flange (outer bolt circle) without inner bolt circle
Type B: Tapped holes in flange (outer bolt circle) and in inner bolt circle
Dimensions in brackets according to ISO 702/I
DIN 55027 & ISO 702/III
WITH BAYONET RING FIXING
B
A
Spindle nose
size
A
B max.
C
D
E
F
3
4
5
6
8
11
15
20
102
112
135
170
220
290
400
540
53,983
63,521
82,573
106,385
139,731
196,883
285,791
412,795
11
11
13
14
16
18
19
21
16
20
22
25
28
35
42
48
3x21
3x21
4x21
4x23
4x29
6x36
6x43
6x43
75
85
104,8
133,4
171,4
235
330,2
463,6
E
F
7° 7' 30''
From taper 4
C
D
CAMLOCK FIXING
F
B
A
7° 7' 30''
E
DIN 55029, ANSI B 5,9 & ISO 702/II
Spindle nose
size
A
B max.
C
D
E
F
3
4
5
6
8
11
15
20
92
117
146
181
225
298
403
546
53,983
63,521
82,573
106,385
139,731
196,883
285,791
412,795
11
11
13
14
16
18
19
21
32
34
38
45
50
60
70
82
3x15,1
3x16,7
6x19,8
6x23
6x26,2
6x31
6x35,7
6x42,1
70,6
82,6
104,8
133,4
171,4
235
330,2
463,6
C
D
DIN 800
WITH THREAD
A
B
C
F
A
Bg5
C min.
D
E
F
M 20
M 24
M 33
M 39
M 45
M 52
M 60
M 76x6
M 105x6
21
25
34
40
46
55
62
78
106
30
36
50
56
67
80
90
112
150
6.3
8
9
10
11
12
14
16
20
10
12
14
16
18
20
22
30
40
20
24
30
35
40
45
50
63
80
E
D
92
MACHINE SPINDLE NOSES TO ANSI B 5.9; ASA B 5.9
A1
7° 7' 30''
A
F2
B
F1
E2
E1
TYPE A1 - A2
Spindle nose
size
A
5
6
8
11
15
20
133.4
165.1
209.5
279.4
381
520
B max.
C
-0,025
D
E1
F1
E2
F2
82.575
106.390
139.735
196.885
285.8
412.8
14.288
15.875
17.462
19.05
20.638
22.225
22.2
25.4
28.6
34.9
41.3
47.6
11x7/16-14 UNC
11x1/2-13 UNC
11x5/8-11 UNC
11x3/4-10 UNC
12x7/8-9 UNC
12x1-8 UNC
104.8
133.4
171.4
235
330.2
463.6
8x7/16-14 UNC
8x1/2-13 UNC
8x5/8-11 UNC
8x3/4-10 UNC
11x7/8-9 UNC
11x1-8 UNC
61.9
82.6
111.1
165.1
247.6
368.3
E1
Tapped holes in flange (outer bolt circle) without inner bolt circle
C
From taper 4
D
A2
TYPE A2
From taper 4
C1
B
A
A
B
max.
3
92.1
4
108
C
D
E1
F1
53.0642 985
11.1
15.9
3x7/16-14 UNC
70.66
63.525
11.1
19
11x7/16-14 UNC
82.55
5
133.4
82.575
12.7
22.2
11x7/16-14 UNC
104.8
6
165.1
106.390
14.3
25.4
11x1/2-13 UNC
133.4
8
209.5
139.735
15.9
28.6
11x5/8-11 UNC
171.4
11
279.4
196.885
17.5
34.9
11x3/4-10 UNC
235
15
381
285.8
19
41.3
12x7/8-9 UNC
330.2
20
520
412.8
20.6
47.6
12x1-8 UNC
463.6
Tapped holes in flange (outer bolt circle) without inner bolt circle
E1
F1
7° 7' 30''
E1
A
A2
D
Spindle nose
size
Type A1-A2 correspond to ISO 702/I
B1
E2
G
TYPE B1 - B2
Spindle nose
size
A
B
max.
C
-0,025
D
G
F1
E2
F2
5
6
8
11
15
20
133.4
165.1
209.5
279.4
381
520
82.575
106.390
139.735
196.885
285.8
412.8
14.288
15.875
17.462
19.05
20.638
22.225
22.2
25.4
28.6
34.9
41.3
47.6
11x11.9
11x13.5
11x16.7
11x20.2
12x23.4
12x26.6
104.8
133.4
171.4
235
330.2
463.6
8x7/16-14 UNC
8x1/2-13 UNC
8x5/8-11 UNC
8x3/4-10 UNC
11x7/8-9 UNC
11x1-8 UNC
61.9
82.6
111.1
165.1
247.6
368.3
A
F2
B
B2
G
7° 7' 30''
F1
Through-hole in flange (outer bolt circle) tapped holes in inner bolt circle. Driver supplied from taper size 4.
C
D
From taper 4
Spindle nose
size
3
4
5
6
8
11
15
20
A
B
max.
C
D
G
F1
92.1
108
133.4
165.1
209.5
279.4
381
520
53.0642 985
63.525
82.575
106 .390
139.735
196.885
285.8
412.8
11.1
11.1
12.7
14.3
15.9
17.5
19
20.6
15.9
19
22.2
25.4
28.6
34.9
41,3
47.6
3x11.9
11x11.9
11x11.9
11x13,5
11x16.7
11x20.2
12x23.2
12x26.6
70.66
82.55
104.8
133.4
171.4
235
330.2
463.6
Through-hole in flange (outer bolt circle) without inner bolt circle
LONG TAPER
B
A
TYPE L
Spindle nose size
A+0.051
B
C
D
L00
L0
L1
L2
L3
69.850
82.550
104.775
133.350
165.100
3 3/4-6 UNS
4 1/2-6 UNS
6-6 UNS
7 3/4-5 UNS
10 3/8-4 UNS
50.800
60.325
73.025
85.725
94.425
14.288
15.875
19.050
25.400
28.575
Driving block
9.525x38.1
9.525x44.45
15.875x60.32
19.05x73.02
25.4x82.55
C
8° 17' 50''
D
93
94

LATHE CHUCKS POWER CHUCKS AND HYDRAULIC

Transcription

Similar documents

LATHE CHUCKS POWER CHUCKS AND HYDRAULIC

bison-bial sa

Toolmex Workholding Catalog - 2010

lathe chucks independent chucks

lathe chucks independent chucks

Orange Line

Fenner Electric Motors - Fenner Power Transmission

Lathe Chucks Independent Chucks

GHE-Series Single Screw Extruder Units

C.V.B. SRL VALVOLE INDUSTRIALI

Maße / Dimensions Schieber Serie AT200F mit Zylinder Knife gate