aircraft control cable rigging tool

Transcription

aircraft control cable rigging tool
AIRCRAFT CONTROL CABLE RIGGING
SYLLABUS
1. PRINCIPIOS BÁSICOS
ESTRUCTURA DEL AVION.
•Generalidades.
SUPERFICIES DE MANDO Y CONTROL.
•Ejes del avión.
•Superficies primarias.
•Superficies secundarias.
FUERZAS QUE ACTUAN EN VUELO.
•Factores que afectan a la sustentación.
•Centro de gravedad.
•Resistencia.
•Empuje o tracción.
ESTABILIDAD
•Estabilidad estática
•Estabilidad lateral
•Estabilidad Direccional
ANGULOS
•Angulo de Ataque
•Angulo de Incidencia
•Angulo Diedro
2. PARTES DEL SISTEMA DE CONTROLES DE VUELO
•Cables
•Poleas
•Conexiones y Actuaciones
3. TECNICAS DE INSPECCION Y MANTENIMIENTO
• Aspectos de Seguridad
• Técnicas de Inspección y Mantenimiento
• Temperatura vs tensión
4. HERRAMIENTA
• Equipo y Material
AIRCRAFT CONTROL CABLE RIGGING
INSTRUCTOR
TJ (RA) JOSE MIGUEL ATEHORTUA ARENAS
ASESOR TECNICO ESTRUCTURAS AERONAUTICAS
E-mail: jose.atehortua@fac.mil.co
E-mail: champyjm@Gmail.com
Web: jose.atehortua@fac.mil.co
Tel. Celular: 300-735-18-00
Tel. Oficina: 3159800 Ext. 1627
UAEAC TEMC 982
AIRCRAFT CONTROL CABLE RIGGING
REFERENCIAS BIBLIOGRAFICAS
1.
FAA 8083-31 HANDBOOK
Aircraft Maintenance Manual –AMA, CHAPTER 2
2.
FAA. AC 43.13-1B, ADVISORY CIRCULAR
Aircraft Standard Practices, Chapter 8
3.
TM-1-1500-204-23-1, TECHNICAL MANUAL
General Aircraft Maintenance (General Maintenance and
Practices). Volume 1.
4.
MANUAL DE VUELO. PRIVATE PUBLICATION
Reference: MIGUEL ANGEL MUÑOZ
5.
T.O. 1A-XXX-2-4 . TECHNICAL ORDER
Organizational Maintenance Flight Control Systems.
6.
T.O 1-1A-8, USAF TECHNICAL ORDER
AIRCRAFT STRUCTURAL HARDWARE
7.
USAF MANUALS PORTALS DIGITAL
http://www.tinker.af.mil/
http://www.robins.af.mil/
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
Locoloc® M2 - Type II
Locoloc® #1-P
Pneumatic Swager
Locoloc® #4-H Hydraulic
10.000 psi
Locoloc® M1-K - Type I - Kit
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
HAND SWAGER TYPE I- M1-K
PORTABLE HAND SWAGING MACHINE KIT
1. This portable, hand operated roll
type swaging machine, will swage
MS type terminals onto
galvanized and stainless steel
cables from 1/16" diameter up
to and including 3/16" diameter.
2. The Locoloc® Type I Roll Swaging
Kit, includes the machine, a full
set of roll dies, terminal gauges,
and feed guide adapters in a steel
carrying and storage case.
Peso: 64 Lbs.
04-1K630
PORTABLE MANUAL CABLE SWAGER KIT
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
Ball Terminal Dies
Weight: 4 Lbs. ea
set.
32Avos.
Straight Shank Terminal Dies - Weight: 4 Lbs.ea set
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
Straight Shank Terminal
GA-S26
GA-B24
Ball Terminal Dies
AIRCRAFT CONTROL CABLE RIGGING
PROCESO DE ESTAMPADO CON TERMINALES
Hand-swaging tools-mechanical
and pneumatic
ST825 Swaging Tool for Cable (Wire Rope)
AT520JK Portable Cable Swaging -Kit ATI520JK
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
Hydraulic Cable Cutters
HC-24 HANDHELD
HYDRAULIC CUTTER
, 7/8" CAPACITY
HC-16
HYDRAULIC
CABLE CUTTER
HC-20 HYDRAULIC
CABLE CUTTER, ½”
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON TERMINALES
1. To quickly determine diameter of any
cable (up to and including 3/8" or 10
mm) this simple gauge does the trick.
2. Merely slip it over a cable and when
the cable fits snugly in the "V" slot,
note the diameter printed on the
gauge. One side reads in fractions of
an inch, the other side in millimeters.
3. Very inexpensive insurance to
eliminate using wrong size cable.
4. Easily carried in pocket or wallet.
Lightweight and corrosion resistant.
Cable Diameter Gauge - GA-4
AIRCRAFT CONTROL CABLE RIGGING
ENSAMBLE DE CABLEADO POR
ESTAMPADO CON MANGAS
Locoloc®
SLEEVE
GAUGES
GA-1P
Cable Diameter Gauge - GA-1P
GA-1P - Gauges 1/32", 3/64", 1/16", 3/32", 1/8",
5/32", and 3/16" oval and stop sleeves.
1. To assure proper swaging of Locoloc® aluminum,
copper and stainless steel sleeves with Locoloc® tools
these simple, "Go" "No-Go" Gauges will determine if
your tools are out of adjustment or alignment.
Locoloc®
SLEEVE
GAUGES
GA-2P
2. When the proper slot in the gauge slips over the
compressed area of the sleeve after swaging then your
swage is satisfactory. If the proper slot does not fit over
the compressed area of the sleeve after swaging then
your tool is out of adjustment and your cable assembly
will not hold the rated breaking strength of the cable
which should be the result when oval sleeves are used
to form a loop or eye in a cable assembly.
GA-2P - Gauges 7/32", 1/4", 9/32", and 5/16".
AIRCRAFT CONTROL CABLE RIGGING TOOL
TURNBUCKLE WRENCH CABLE RIGGING
Part Number: ADE4U
Part Number: TB02
Part Number: TB01
AIRCRAFT CONTROL CABLE RIGGING TOOL
TURNBUCKLE WRENCH CABLE RIGGING
AIRCRAFT CONTROL CABLE RIGGING TOOL
AIRCRAFT CONTROL CABLE RIGGING TOOL
AIRCRAFT CONTROL CABLE RIGGING TOOL
TURNBUCKLE WRENCH CABLE RIGGING
Kid Rig #1226HW
AIRCRAFT CONTROL CABLE RIGGING
PRUEBA DE TENSION PARA ENSAMBLAJE
DE CABLES POR ESTAMPADO CON TERMINALES
AIRCRAFT CONTROL CABLE RIGGING TOOL
TRANSPORTADOR DE ANGULOS
AIRCRAFT CONTROL CABLE RIGGING TOOL
TRANSPORTADOR DE ANGULOS
COMBINATION SQUARE SET
PROTRACTOR,
MAGNETIC LEVEL
USD$50-100
Inclinómetro Digital
INSIZE 2173-360
Protractor Scale
AIRCRAFT CONTROL CABLE RIGGING TOOL
TENSIOMETROS
T5 – 2000 Series
Cable Tensiometer
USD$595-735
(USAF C9) T60
Cable 1/16 1/4
150-450 lbs
USD$800-1000
#30001
10-70 lbs
•USAF C9(1/16", 1/8", 3/32")
equivalent USD$269.95
#30002
250-350 lbs
(5/32" & 3/16“)
AIRCRAFT CONTROL CABLE RIGGING TOOL
TENSIOMETROS
AIRCRAFT CONTROL CABLE RIGGING TOOL
TERMOMETRO Y MEDIDOR DE HUMEDAD
Fluke 971 Medidor de
Temperatura y Humedad Relativa
USD$ 150
Termómetro – higrómetro digital
UT-331
USD$80
AIRCRAFT CONTROL CABLE RIGGING TOOL
REGLAS Y CINTAS METRICAS
AIRCRAFT CONTROL CABLE RIGGING TOOL
LENTES DE AUMENTO
7X Min.
AIRCRAFT CONTROL CABLE RIGGING TOOL
ESPEJOS

Similar documents