Research Directory College of Engineering

Transcription

Research Directory
College of Engineering
2013 UNITEN RESEARCH PROFILE
PROJECT LEADER
TITLE
1
Azrul Mohd Ariffin, Dr.
Development of a Simulation Tool to Predict Solar Power Output
based on Real-Time Temperature and Insolation Measurements
45
2
Analysis of Different Transient Phenomena within Underground
Cables in Sustaining Continuous Power Delivery
46
3
Cheah Cheng Lai, Dr.
Hardware Implementation of Adaptive Error Correction Technique
for Wireless Sensor Networks
47
4
Ewe Lay Sheng, Dr.
Fabrication of New Read Head for Magnetic Recording Devices
Based High Sintering Magnetoresistive Perovskite Manganites
48
5
Ismail Bin Said
Study of Fast-charger in Off-grid Solar Charging Station for Electric
Vehicles
49
6
Jawaid Iqbal InayatHussain
Fundamental Research on the Utilization of Chaos Theory for
Diagnosis of Malfunctions in Rotating Machinery
50
7
Marlinda Bt. Abdul Malek, Development of Daily Rainfall Prediction Model Using Clonal
Assoc. Prof. Dr. Ir.
Selection Algorithm in Artificial Immune System
51
8
Md. Mujibur Rahman,
Assoc. Prof. Dr.
Characterization of Sintering Schedule for Warm Compacted
Components
52
9
Muhammad Fairuz bin
Abdul Jalal
Modeling of Building Thermal Comfort Control Using RLF Method for
Non-Linear HVAC System
53
10
Nadia Tan Mei Lin
A Battery Storage System Based on a Bidirectional Isolated DC-DC
Converter for Output-Power Leveling of Photovoltaic Source
54
11
Nadia Tan Mei Lin
Design and Development of a Compact Power-Supply Unit for LED
Lighting
55
12
Nagaletchumi
Balasubramaniam
Dynamic Integration of WLAN, ZigBee and RFID for Indoor Location
Sensing
56
13
Nasri A. Hamid, Assoc.
Prof. Dr.
Development of a Superconducting Wind Turbine Generator
Prototype for Generation of Electricity from Wind
57
14
Noor Shamsiah Othman,
Dr.
An Investigation of Over-complete Expansions Algorithm for Realtime Wireless Transceiver
58
15
Noor Shamsiah Othman,
Dr.
Analysis of Cable Insulation Performance via Polarization and
Depolarization Current Characteristics
59
16
Nur Irmawati Bt Om
Experimental Hydrodynamics Study of Microchannel Heat Sink by
means of Quantitative Flow Visualization Technique
60
17
Nur Mazlini binti Razali
Life Cycle Assessment Study on Energy Balance & Environmental
Impact of Recycling Waste Cooking Oil into Biodiesel
61
18
Prem A/L Gunnasegaran
Inverse Heat Transfer Formulation on Compact Heat Exchanger
using Infrared Thermography Camera
62
19
Experimental and Numerical Investigations on the Laminarturbulent Flow Transition and Heat Transfer of Nanofluid in
Microchannels
63
20
Shahida Begum, Assoc.
Prof. Dr.
Development of High Performance TiO2 Based Varistor Materials
with New Dopants and Binder
64
21
Sharifah Azwa Bte
Shaaya
Modeling the Feasibility of Renewable Energy Power Plants by
Meteorological Forecasting Data
65
22
Tan Ee Sann
Fundamental Study of Atomization Characteristics of Biodiesel for
Power Generation
66
23
Theresa Yeo Wee Sing,
Dr.
Study of Allotropic Phase Transformation Mechanism in Mechanical
Milled Alumina-Cobalt Nanocomposite
67
24
Woon Hai Song, Dr.
The Recycling of Local Steel Mill By-product (Mill Scale) into High
Industry Grade Permanent Magnets
68
25
Yap Boon Kar, Dr.
Flux Cleaning Process for Flip-Chip Chip-Scale-Package (FC CSP)
69
44
PAGE
RESEARCH DIRECTORY: COLLEGE of ENGINEERING 2013
Project Leader: Dr. Azrul Mohd Ariffin
Funding: MOHE (RM106,400.00)
Contact address: azrula@uniten.edu.my
Development of a Simulation Tool
to Predict Solar Power Output based
on Real-Time Temperature and
Insolation Measurements
An equivalent circuit based simulation tool has been
developed for predicting the performance or solar
power output by incorporating the effect of various
types of photovoltaic (PV) modules based on the
environmental parameters of ambient temperature
and solar irradiance. At different locations, the output
is limited by these two factors, together with the
type of solar module used. The single-diode model
is studied in this research. The output characteristics
or the maximum power that can be generated by the
Figure 1
selected solar module is simulated under real time
inputs of solar irradiance and ambient temperature.
Significant correlations were found between the
simulated results and the measured field data.
The developed simulation tool can be beneficial in
forecasting the power output generated by a solar
module system at a specific location without the
need for actual installation. This can potentially help
in the cost-benefit analysis for a solar-based project
at a particular location.
Figure 2
45
Project Leader: Dr Azrul Mohd Ariffin
Contact address: azrula@uniten.edu.my
Analysis of Different Transient Phenomena
within Underground Cables in Sustaining
Continuous Power Delivery
Overvoltage phenomena such as fault, switching, load
rejection and lightning can cause severe damages on
electrical power equipments including underground
cables. Underground cables have long been
considered the better option for energy transmission
besides overhead lines due to fact that they are not
exposed to environmental degradations which in
turn may last up to 40 years. Nevertheless, occasional
surges due to the aforementioned factors could
possibly affect the performance of an underground
cable by accelerating the degradation process of its
components. In addition, these transients can also
propagate along the length of the cable; causing
significant voltage build-up at the junctions in
which if not controlled, can lead to total disruption
of power transmission. Thus, it is very important to
understand the impacts of a transient phenomenon
when it occurs along an underground cable with a
specific construction and geometry. This research work
attempts to analyze transient behaviour occurring
within underground cables. The first part of the
Figure 1
46
work would be on the understanding of the most
common transient surges and classify the likelihood
of occurrence within an underground cable. The
knowledge on this will be the platform for the work
to artificially simulate the transient signals based
the concept of circuit equivalence. In addition, the
parameters representing the cable will also be studied
as part of the work since they will directly affect the
response of the transient signals. From this study, the
transient behaviour will be analyzed using PSCAD
and RSCAD simulation tools. The simulation work
will allow a more conclusive understanding on how
a transient signal might propagate along a cable and
whether there is a need to mitigate such behaviour.
The final part of the work is to evaluate the effects of
transient signals in a complete electrical network in
order to assess the need of protection systems and
to recommend the optimum design for it.
Figure 2
Project Leader: Dr. Cheah Cheng Lai
Funding: ERGS
Contact address: clcheah@uniten.edu.my
Hardware Implementation of
Adaptive Error Correction Technique
for Wireless Sensor Networks
Wireless sensor network (WSN) is a low data rate, low
power consumption, and low cost wireless networking
protocol targeted towards automation and remote
control applications. In wireless communications
there are a variety of noises and fading which may
cause errors. When an error occurs at a sensor node,
the node will request for re-transmission of the faulty
packets which will reduce the network bandwidth
and increase the power consumption.Forward error
correction (FEC) is a technique that can be used to
mitigate errors in WSN. The simplest method of
deploying FEC is by using a fixed code. However,
this will cause unnecessary consumption of FEC
overhead bandwidth even when there is no error.
An adaptive error correction technique can be used
to optimize the utilization of FEC overhead over the
limited bandwidth of WSN. However, most existing
adaptive FEC techniques for wireless communications
change to a stronger code only when an error has
already occurred.
weaker or a stronger code before an error occur. The
hardware experimental system has been set up to
study the performance of the proposed technique.
The performance of the proposed technique is to
mitigate errors under different error condition,
increase the network bandwidth and to reduce
the power consumption being investigated.The
arrangement consists of two computers and two 2.4
GHz radio frequency (RF) transceivers. Each computer
is connected to an RF transceiver. Computer 1 will be
used as the controller for sensor node 1 which will
process and encode the payload using the proposed
technique before sending the encoded data to the
RF transceiver for transmission. Computer 2 will be
used as the controller for sensor node 2. Upon the
arrival of the encoded data, Computer 2 will decode
and process the data using the proposed technique.
The Texas Instrument CC2520 2.4 GHz IEEE 802.15.4/
ZigBee RF transceiver can be used as the RF transceiver
as it can encapsulate the data using the IEEE 802.15.4
standard format before the transmission.
This paper explores the hardware implementation
of an adaptive error correction technique using the
received signal strength indication (RSSI) as the input
parameter such that the technique can switch to a
Figure 1
47
Project Leader: Dr. Ewe Lay Sheng
Contact address: laysheng@uniten.edu.my
Fabrication of New Read Head
for Magnetic Recording Devices
Based High Sintering Magnetoresistive
Perovskite Manganites
Nd1-xSrxMnO3 manganite system has been studied to
understand the effects of grain shape on the electrical,
magneto resistance and magneto transport properties
in different strontium doping level. The materials were
prepared via solid state reaction method at Sr doping
concentration x = 0.12, 0.152, 0.22, 0.252 and 0.32.
All samples had the same orthorhombic structure and
no impurities were detected when examined by X-ray
diffraction. The range of grain size was found to be
between 10.0 µm – 16.0 µm for all samples. Sample
with x = 0.32 possesses the smallest grain size and
To values, where To value reflects the bending of MnO-Mn bond angle. In addition, with the increase of
strontium doping, most of the grains transformed into
pentagon and hexagon shapes. The insulator metal
transition temperature, Tim was found to increase
(a)
(b)
Figure 1
48
from ~ 131 K to 180 K as the doping concentration
increased except for samples doped with x = 0.152
and 0.252. The charge ordering was found to occur at
~120 K for samples x = 0.152 and 0.252 respectively.
It is worth noting that the grains growth with more
pentagon and hexagon shapes can shift the Tim to
higher temperature region (x = 0.32). The magneto
resistance (MR) values were found to increase with
the increasing magnetic field. Sample doped with x =
0.32 recorded the highest MR (~ 31.5%), the highest
Tim ,the smallest grain size and the least bending of
Mn-O-Mn bonding angle.
(c)
(d)
Figure 2
(e)
Project Leader: Assoc. Prof. Ismail Bin Said
Contact address: ismails@uniten.edu.my
Study of Fast-charger in
Off-grid Solar Charging Station
for Electric Vehicles
Electric vehicles (EV) are more efficient than internal
combustion engines (ICE), with 33% of total energy
supplied being converted to motion for EV and 7% for
ICE. To be more effective, the energy used to charge
the batteries for the EV should come from renewable
energy sources such as photovoltaic, rather than from
the grid, which still has some percentage of fossil fuel
used in electricity generation. This project is aimed
at designing, construction and testing of an off-grid,
fast-charging system that is capable of charging EV
batteries in less than 20 minutes. A fast charging
system is a pre-requisite for full EV acceptance, as
the waiting period of EV battery charging has not
been at an acceptable level by consumers especially
for long-distance travel. Due to high current needed
in fast-charging, this project will explore several
charger topologies and charging algorithms that are
reliable and will not be detrimental to EV batteries.
An assessment will also be made on the performance
and reliability of other charging station equipment
such as solar panels, maximum power-point trackers
(MPPT), batteries and inverters, used in conjunction
with the designed fast charger.
Figure 1
Figure 2
49
Project Leader: Jawaid Iqbal Inayat-Hussain
Funding: FRGS (RM38,000.00)
Contact address: jawaid@uniten.edu.my
Fundamental Research on the
Utilization of Chaos Theory
for Diagnosis of Malfunctions
in Rotating Machinery
Chaos theory has been widely and successfully applied
in the biomedical and economics fields, particularly
to characterize the ECG signal in the former, and to
perform market analysis and forecasting in the latter.
The dynamics of the ECG signal and financial market
data is not dissimilar to that of the vibration signal
from rotating machinery experiencing certain types of
fault, and thus suggesting that the chaos theory could
potentially be applied to monitor and diagnose the
progression of these faults. The techniques presently
and widely used for the condition monitoring and
fault diagnosis of rotating machinery are based on
the assumptions that these faults are linear in nature.
These techniques, which include time waveform and
spectrum analysis, have been proven to be successful
for the identification of common faults in rotating
machinery such as rotor imbalance and misalignment.
However, other machinery faults that are known to
cause chaotic vibration response, for example, rotorto-stator rub, looseness of machine components
and oil whip, may not be correctly diagnosed using
these existing techniques. This project is proposed
with the objective to overcome the deficiencies in
the existing techniques for condition monitoring and
fault diagnosis of rotating machinery. Some available
invariant quantities to characterize chaos such as
Lyapunov exponent and correlation dimension will
be adopted and utilized for monitoring the condition
and diagnosing of rotor-to-stator fault in rotating
machinery. Preliminary work on the application of
these techniques on numerically generated data of
established nonlinear systems has shown promising
results. Laboratory verification of the improved
techniques will be made on an experimental rig that
has been built to incorporate rotor-to-stator rub fault
that isknown to cause chaotic rotor response. It is
envisaged that the successful implementation of
these techniques will directly benefit the users of
rotating machinery in terms of reduced down-time as
well as avoidance of potential catastrophic failures.
Figure 1: Correlation dimension of the rotor response
Figure 2: Lyapunov exponents of the rotor response
50
Project Leader: Assoc. Prof. Dr. Ir. Marlinda Bt. Abdul Malek
Funding: MOHE (RM 85,240.00)
Contact address: Marlinda@uniten.edu.my
Development of Daily Rainfall
Prediction Model Using Clonal
Selection Algorithm in Artificial
Immune System
This study presents the training, testing and prediction
processes of daily rainfall data at several rainfall
stations in Selangor, using Clonal Selection Algorithm
(CSA). CSA is part of Artificial Immune System (AIS)
which adapts the idea of clonal selection theory in
human immune system. The parameter used in this
analysis is 100 numbers of detectors, where it was
found that numbers of detector ranging from 100 to
1000 produces similar results. The data analyzed in
this study was from January 1990 until December
2011. Results produced from the generated rainfall
data were compared with actual rainfall data at the
testing stage. It was found that both the trend and
peaks of the hydrographs of the generated data were
approximately the same as the actual data. The high
values of similarity percentage between generated
and actual data obtained in this study reinforce
the hypothesis that CSA is suitable to be used as
prediction model for a continuous time series data
which is very noisy and chaotic in nature such as
daily rainfall data.
51
Project Leader: Assoc. Prof. Dr. Md. Mujibur Rahman
Funding: ERGS (RM78,000.00)
Contact address: mujibur@uniten.edu.my
Characterization of Sintering Schedule for
Warm Compacted Components
Sintering is a heat treatment process for bonding
particles together into a coherent, predominantly
solid structure via mass transport events. Such
bonding improves the strength and other engineering
properties of powder compacts. The standard way of
performing the sintering operation is to subject the
parts to a high temperature in a controlled atmosphere
using a sintering furnace [1]. The process is known as
free sintering since no mechanical stress is applied
on the parts. The effect of sintering is the change
of inter-particle contact, which begins with rapid
growth between particles because of the cold welding
taken place in the green compact. At this stage, the
void volume is reduced and finally as the surface
tension and diffusion continues, the spheroidization
of isolated pores occurs and it results in a relatively
homogenous component [2]. Correct sintering is of
paramount importance to the powder metallurgy
process to ensure not only the development of the
strength needed for the part to fulfill its intended
role as an engineering component, but also that the
dimensions of the parts are correct [3].
The metal powder is generally mixed with a polymeric
lubricant prior to the generation of defect-free yet
high density green compacts to be sintered. During
the sintering, the lubricant is burnt out due to its
52
low melting temperature which causes uneven
density distribution and dimensional distortion if the
sintering is not conducted through proper schedule
[4-5]. Therefore, the objective of this project is to
characterize the sintering schedule, i.e., heating rate,
holding time and temperature, and cooling rate for
warm compacted components.
The main powder constituents i.e. iron powder
ASC100.29 will be mechanically mixed with different
wt% of zinc stearate (polymeric lubricant) for 10 to 60
minutes. The powder mass will be shaped at various
forming parameters to generate defect-free green
compacts which will subsequently be sintered at inert
gas fired furnace at different sintering schedules.
The sintered products will be characterized through
dimensional measurement, mechanical testing and
microstructure evaluation to assess the effect of
sintering schedule to the mechanical properties
and microstructure of the samples. The expected
outcome of this research project is the fundamental
knowledge on the behavior of warm compacted
metallic components sintered at inert gas fired
atmosphere.
Project Leader: Muhammad Fairuz bin Abdul Jalal
Funding: FRGS (RM 56,250.00)
Contact address: mfairuz@uniten.edu.my
Modeling of Building Thermal
Comfort Control Using RLF Method
for Non-Linear HVAC System
The purpose of Heating, Ventilating and Air
Conditioning (HVAC) system is to provide and maintain
a comfortable indoor temperature and humidity. The
objective of this work is to model building structure,
including equipments of HVAC system. The hybrid
HVAC model is built with physical and empirical
functions of thermal inertia quantity. Physical laws
are used to build the sub-model for subsystems that
have low thermal inertia while the empirical method
is used to build the sub-model for subsystems with
high thermal inertia. The Residential Load Factor
(RLF) is modeled by Residential Heat Balance (RHB).
RLF is required to calculate a cooling/heating load
depending upon the indoor/outdoor temperature.
The transparency, functionality of indoor/outdoor
temperatures and simplicity of RLF makes it suitable
for modeling. Furthermore, the parameters of the
model can be calculated differently from room to
room and are appropriate for variable air volume
(VAV) factor. Nowadays, a VAV system is universally
accepted as means of achieving both energy
efficiency and comfortable building environment.
In this research work, a pre-cooling coil is added
to humidify the incoming air, which controls the
humidity more efficiently inside conditioned space.
The model presented here will be verified with
both theoretical and numerical methods. Advanced
Multi Input Multi Output (MIMO) nonlinear control
which will be tuned online based on self organizing
method to overcome uncertain disturbance will also
be developed. This controller will deal perfectly with
undesirable characteristics of the developed HVAC
system mode and track the desirable references.
Established and also self-developed tuning methods
will be applied on the controller to determine the
convergence rate and practicality of the controller.
Figure 1
53
Project Leader: Nadia Tan Mei Lin
Funding: Ministry of Higher Education (RM 82,320.00)
Contact address: nadia@uniten.edu.my
A Battery Storage System Based
on a Bidirectional Isolated DC-DC
Converter for Output-Power
Leveling of Photovoltaic Source
Massive penetration of renewable energy can cause
instability in the utility grid. Therefore, energy storage
system will be required to level the power output from
fluctuating renewable sources such as Photovoltaic
(PV) and wind. This project aims to design and develop
a 2-kW bidirectional isolated dc-dc converter that will
perform the power conversion of a battery energy
storage system in order to level the fluctuating PV
output. The feasibility of the energy storage system
when connected to the ultility grid will be investigated
in terms of operability, total harmonic distortions, and
losses. A feedback control system will be employed
to charge and discharge the battery based on the PV
PV output. Energy storage will be charged when the PV
generation is more than required and energy storage
will be discharged when the PV generation is less
than required by the utility side. Figure 1 shows the
block diagram of a PV system with battery energy
storage. In this project, the main concern will be
given to development of the bidirectional isolated
dc-dc converter and controller. Figure 2 shows the
topology of the employed bidirectional isolated
dc-dc converter. Required power can be achieved
by simple phase shift modulation.
DC-‐DC Converter PWM Converter MPPT Bidirectional Isolated DC-‐DC Converter Figure 1: PV System with Energy Storage
Figure 2: Bidirectional isolated dc-dc converter
54
Utility Controller RESEARCH DIRECTORY: COLLEGE of ENGINEERING 2013
Project Leader: Nadia Tan Mei Lin
Funding: MOHE and KeTTHA (RM 92,200.00)
Contact address: nadia@uniten.edu.my
Design and Development
of a Compact Power-Supply
Unit for LED Lighting
Lighting system has played an importance role in
brightening up our surrounding area especially during
night time or in a dark space. Consequently, in a
rapidly developing country like Malaysia, the demand
of energy for lighting has increased tremendously.
Due to this high demand of energy for lighting, HighBrightness Light-Emitting Diode (HBLED) has become
a new source of light, as it can emit as much amount
of light as incandescent bulb and fluorescent lamp
with lesser energy consumption, is environmental
friendly and sustainable. The primary objective of
this project is to build a high reliability and highefficiency HBLED driver with galvanic isolation
and current regulation. Figure 1 shows the overall
HBLED driver system in order to achieve the primary
objective. This research is significant as it can bring
a lot of benefits to the consumers and industries in
terms of energy saving and maintenance fee saving.
Figure 1 : The proposed HBLED driver system
55
Project Leader: Nagaletchumi Balasubramaniam
Funding: ERGS (RM 64,175.00)
Contact address: Nagaletchumi@uniten.edu.my
Dynamic Integration of WLAN, ZigBee and
RFID for Indoor Location Sensing
Indoor location sensing systems have become very
popular in recent years. Numerous indoor location
sensing techniques based on various technolgies such
as IrDA, WLAN, Bluetooth, Ultra Wide Band (UWB) and
ZigBee have been developed and studied. However,
indoor location sensing techniques developed based
on single technology has its fallback. Prediction of
accuracy, precision and reliability remains as primary
issue surrounding the practicality indoor location
56
sensing system. This research project aims to develop
an indoor location sensing model that integrates
three (3) technologies, namely WLAN, ZigBee and
RFID. A lab based environment will be developed
for the integrated indoor location sensing model to
test and validate the functionality. The integrated
model will be analyzed comprehensively on accuracy,
precision, complexity and reliability.
Project Leader: Assoc. Prof. Dr. Nasri A. Hamid
Funding: MOSTI (RM227,000.00)
Contact address: Nasri@uniten.edu.my
Development of a Superconducting
Wind Turbine Generator Prototype for
Generation of Electricity from Wind
The rapid economic growth of Malaysia is mostly
propelled by the growth in the industrial sector,
which depends on the availability of cheap energy
supply. However, the reserve of oil and gas which
has been the main sources of energy in Malaysia is
fast depleting. To ensure the availability and security
of energy to fuel the economic growth, alternative
sources of energy for electricity generation is
needed. One of the potential sources of alternative
sources of energy is the wind energy. However, with
the existing Malaysian wind characteristics, the
availability of reliable and consistent source of wind
is very scarce and the capability of the conventional
wind turbine to maximize the harvesting of wind
is doubtful. Therefore, the need of a reliable and
sustainable wind turbine is necessary to enhance
energy production of a wind farm. From our previous
work on superconducting motor, the performance of
the superconducting motor is very much superior
as compared to the conventional motor in terms of
efficiency and energy saving. Based on the positive
Terminal
results and performance of the superconducting
motor, it is expected that the application of
superconducting wind turbine generator is able to
complement the Malaysian wind characteristics to
ensure sustainability of wind energy for electricity
generation. This project includes multidisciplinary
areas of physics, materials, mechanical and electrical
engineering. The development of the superconducting
wind turbine covers the designing concept of
superconducting generator and wind turbine, setting
up of control circuit of the design concept, and testing
the wind turbine generator with special emphasis
on the Malaysian wind characteristics. This project
has high novelty since such wind turbine has never
been developed in this region in which the weather
and wind condition is different. Thus, the crucial
contribution of the superconducting wind turbine
generator is mainly on efficiency and sustainability.
Superconducting coil
Shaft
Stator
Bracket
Rotor
Figure 1: Design Concept of Superconducting Wind Turbine Generator
57
Project Leader: Dr. Noor Shamsiah Othman
Contact address: shamsiah@uniten.edu.my
An Investigation of Over-complete
Expansions Algorithm for Real-time
Wireless Transceiver
Wireless voice and video conferencing is becoming
more and more popular in recent years due to its
convenience to conduct meetings no matter where
you are. In voice and video conferencing, users
expect that what they say or do will be transmitted
instantly to the other end of the connection, as if
the two parties were in the same room, also called
as real time communication. The most overwhelming
challenge in wireless voice and video conferencing
is to transmit the voice and video over wireless
channels, which takes up large amount of bandwidth
requirement. Hence, the compression of voice
and video signal is essential, in order to increase
the bandwidth efficiency. One of the codec used
to compress voice signal is Adaptive Multi Rate
Wideband (AMR-WB), which provides superior speech
quality. The conventional way of voice transmission
over noisy channels is by introducing redundancy for
error protection after voice compression, which is
known as forward error correction (FEC). Alternatively,
58
the artificial redundancy for error protection may
be inserted prior to the voice encoder stage. This
project aims to investigate the performance of a
real-time wireless speech transceiver, which invokes
over-complete expansion by introducing symbolbased redundancy prior to the AMR-WB encoder.
More explicitly, a structured redundancy based on
the discrete Fourier transform (DFT), the discrete
cosine transform (DCT) and the discrete Hadamard
transform (DHT) are inserted for error protection prior
to quantization by employing the principle of block
coding. At the receiver, the soft-bit assisted AMR-WB
codec exploiting the concept of soft speech bits is
employed to provide additional error protection.
Therefore, an algorithm will be developed to exploit
the explicit redundancy introduced in the continuousamplitude domain by the soft-bit decoder.
Project Leader: Dr. Noor Shamsiah Othman
Contact address: shamsiah@uniten.edu.my
Analysis of Cable Insulation Performance
via Polarization and Depolarization
Current Characteristics
One of the main causes for underground power cable
failures is the long-term degradation of the insulation
system. The insulation is subjected to various types
of stresses and these will all lead to changes on
the structure of the material on a molecular level.
When this happens, the dielectric now is no longer
homogeneous as impurities such as water molecules
and vapour may be present within the material itself.
This would then affect the capability of the material
to insulate the high voltage cable. Thus it is very
important to monitor the changes of the dielectric
properties in order to assess its performance as an
insulator. One of the ways to analyse the dielectric
response of an insulating material is by using a
technique known as the polarization/depolarization
current (PDC) analysis. The technique works by
subjecting the dielectric with low levels of voltage
and analysing the current during the polarization
and depolarization processes. Conventionally, PDC
Figure 1
measurements are used to analyze the moisture
content in power transformers. For cables however,
the analysis is not straightforward since the inception
of water in an underground cable is complex in
nature. Thus there is great emphasis nowadays to
undertake various diagnostic tests on the insulation
of the underground cable as the cost of repairing
damaged cable is very substantial. This research work
emphasizes on forecasting dielectric response in a
cable through the simulation of the theories relating
to the PDC processes. From the simulation results,
the response can be compared with the experimental
measurements obtained by different researchers. It is
hoped that this work could give a reliable indication
on the severity of insulation degradation due to the
presence of water.
Figure 2
59
Project leader: Nur Irmawati Bt Om
Funding: RM 81,000.00
Contact address: Irmawati@uniten.edu.my
Experimental Hydrodynamics
Study of Microchannel Heat Sink
by Means of Quantitative Flow
Visualization Technique
The rapid development of microfluidic
microelectromechanical systems (MEMS) has
resulted in great interest in the understanding
of flow behavior in microchannels due to their
importance in such applications as microelectronics
cooling, drug delivery, biotechnical analyses, and
telecommunication technologies. The fluid flow
characteristics of microchannels are important to
the design of microfluidic devices, and thus this
topic is of significant importance to the further
development of microfluidic MEMS devices. Because
of this importance, researchers have been working in
this area since the 1980s, and many interesting, yet
often times conflicting, results have been reported. In
many previous studies [1,2], researchers measured the
friction factor or Nusselt number in microchannel flow
and compared the results with conventional theory.
To enhance heat transfer in microchannel, some
researchers have studied the use of nanofluid [3]. This
work will use microscopic particle image velocimetry
(microPIV) to obtain instantaneous velocity field data
for flow through square microchannels. In micro-PIV,
seed particle size must be small enough to faithfully
follow the flow without disrupting the flow field,
clogging the device, and producing unnecessarily
large images. At the same time, particles must be
large enough to be adequately imaged. The local
velocity inside the channels was measured where
the flow was seeded with fluorescent particles. A
pulse laser source was used to illuminate the PIV
particles. The observation was carried out utilizing
an objective with calculated depth of correlation.
The experiments will be performed at various flow
rates corresponding to Reynolds numbers. For each
set of experiments, sufficient time will be allowed
to pass after starting the pump to allow the flow to
reach steady state. For smaller flow rates, it took
a longer time to reach a steady state compared to
higher flow rates.
Figure 1: Schematic of the experimental set-up
60
Project Leader: Nur Mazlini binti Razali
Contact address: mazlini@uniten.edu.my
Life Cycle Assessment Study on
Energy Balance & Environmental
Impact of Recycling Waste
Cooking Oil into Biodiesel
This study aims to explore the impact on energy
balance and emission from the utilization of biodiesel
generated from waste cooking oil (WCO) for incampus transportation fleet. The objectives of the
study are to quantify and compare the energy input
and output, and to assess the carbon footprint over
the entire life cycle of WCO biodiesel which will be
produced using in-situ rapid processing technology
and utilizing feedstock from in-campus eatery
centers. A proper waste mechanism system will be
implemented to collect WCO from eatery centers,
which will be aggregated and processed into biodiesel.
Biodiesel produced using the innovative mobile rapid
processing technology developed by the university
will then be blended with diesel prior to utilization
by selected in-campus fleet. A reference unit will
run on conventional diesel as a comparison to the
test unit which will run on 20% biodiesel blend.
Inventory of material flow and energy associated
with the collection, production and fuel utilization
will be established for impact assessment. The results
on net energy use will be calculated by comparing
the energy input and energy output over the entire
lifecycle. Biodiesel has the potential to reduce CO2
emission and other hazardous gaseous with global
warming potential (GWP) and these quality will be
assesed from the carbon footprint evaluation. In
conclusion, this study will provide scientific evidence
for indigenous technology implantations through
the energy impact assessment and environmental
feasibility that can be proliferated at other site with
similar system boundaries including nationwide.
61
Project Leader: Prem A/L Gunnasegaran
Contact address: prem@uniten.edu.my
Inverse Heat Transfer Formulation on
Compact Heat Exchanger Using Infrared
Thermography Camera
Plate finned-tube heat exchangers, which are
commonly considered as compact heat exchanger
(CHE) are intensively used in many industrial
processes. The performances of this kind of heat
exchanger are directly linked to the air-side thermal
resistance. On the air side, the heat transfer surface is
usually expanded using continuous fins. Automotive
heat exchangers often consist of multiple rows of
flattened tubes with continuous or louvered fins.
The fluid flow structure between the fins depends
strongly on the geometrical parameters, in line or
staggered tube arrangements, tube spacing, tube
shape, tube diameter and fin spacing. The research
of inverse heat conduction problems, has offered
methods largely to reduce the experimental work to
obtain accurate heat transfer measurements in many
heat conduction problems. One of the approaches
is the conjugate gradient method which transforms
the energy equation, the so called ‘‘direct problem’’,
into an adjoint and a sensitivity equation and solves
these three equations iteratively to minimize the
estimation error. Conversely, an inverse forced
convection problem considers the fluid domain
instead of the solid domain, and the convection
heat transfer coefficient is no longer required on the
boundaries. This approach is capable to offer accurate
heat transfer rates without the knowledge of the solid
material domain. The main disadvantage, however, is
that an inverse forced convection problem is much
more complicated numerically because there are
more equations to be solved in the direct problem. In
this proposed study an experimental technique that
uses advanced infrared thermography system will be
employed together with an estimation algorithm to
predict the local convective heat transfer coefficients
of finned surfaces of a CHE.
Figure 1: Schematic of the experimental setup-up
62
Project Leader: Prem A/L Gunnasegaran
Contact address: prem@uniten.edu.my
Experimental and Numerical
Investigations on the Laminar-turbulent
Flow Transition and Heat Transfer of
Nanofluid in Microchannels
In many systems involving MicroElectroMechanical
(MEM) devices, the operating temperature can reach
a critical level whereby the use of standard cooling
methods are insufficient. In recent years, there have
been several studies on the use of liquid flow in
microchannels to enhance the cooling process of many
industrial processes. More recently, research has been
focused on the use of nanofluid as coolant to further
enhance the heat transfer process in microchannels.
Nanofluids, liquid containing suspended metallic
particle materials with average sizes below 100 nm,
has been proven to exhibit superior heat transfer
capabilities compared to conventional coolants . The
heat transfer enhancement, however, is expected
to come together with higher energy required to
pump the liquid in the system. In addition to the
various thermophysical properties associated
with the coolant, the geometrical properties of the
microchannels can have great influence on the fluid
flow and heat transfer inside the microchannels.
Due to the complexities of the problem at the
micro-scale (from both experimental and numerical
simulaton point of view), most previous studies in
the literature have been limited to the laminar flow
regime. In addition, many previous studies have
reported inconsistensies between experimental
and numerical results on the prediction of the flow
transition region (in terms of the Reynolds number)
from laminar to turbulent. The present work attempts
to fill this existing gap. In this project, turbulent flow
and heat transfer characteristics in microchannels
will be investigated both using experimental and
computational means. Effects of channel shapes,
coolant Reynolds number, heat sources and friction
factor are to be investigated using working fluids,
of water Al2O3-H2O (alumina-water) and nanofluid.
The outcome of the research includes prediction
of the laminar-turbulent transition region in the
microchannel flow. The results gained in this
investigation will be useful in many industrial and
natural processes, in which the knowledge on the
turbulent heat transfer behavior is of uttermost
importance.
63
Project Leader: Assoc. Prof. Dr. Shahida Begum
Funding: e-Science (RM312,000.00)
Contact address: Shahida@uniten.edu.my
Development of High Performance TiO2
Based Varistor Materials with New
Dopants and Binder
Varistor are ceramic materials which have unique
nonlinear current-voltage behavior that is used in
circuits to protect the system against transient surge.
Varistors behave in a non ohmic behavior in which a
varistor has 3 different regions. The most important
region is the non linear region or the breakdown
region which helps to protect the electrical and
electronic equipments. There are various types of
varistor materials like SiC, ZnO and SnO2 available in
the market. However, current trends require varistor
to have more function such as low breakdown voltage
and high permittivity. Technology today drives for
smaller integrated circuits which requires low voltage
applications. SiC, ZnO and SnO2 are unable to meet
this requirement. Hence, TiO2 is an emerging new
material that can satisfy this new functional demand.
However, TiO2 alone cannot perform that function
without addition of small amount of impurity. In
this project, development of TiO2 varistor material
with various dopants will be investigated. TiO2 base
varistor material has promising potential as high
performance varistor. Titanium Dioxide (TiO2) ceramic
powder has been doped with various dopants like
Tungsten Oxide (WO3), Bismuth Oxide (Bi2O3), Cobalt
Oxide (Co3O4), Silicon Dioxide (SiO2) and Tantalum
Pentaoxide (Ta2O5). The percentages of dopants
were varied at various levels. In addition, binders
like PVA, PEG and Duramax have also been added
into TiO2 to improve the mechanical and electrical
properties of the varistor material. To further improve
the characteristic, nanosized TiO 2 has also been
investigated to observe its performance. Some merits
in the used of nanosized particles in this project
64
such as increasing its comparative density, decrease
grain size of sintered bodies, hence will increase the
mechanical properties of samples.
The samples are prepared through a long process
of powder preparation, mixing, drying, compacting,
sintering and polishing. The prepared discs are
analyzed by evaluating the physical, mechanical,
microstructure and electrical properties. The physical
properties have been evaluated by measuring the
green and fired density and axial and radial shrinkage.
The mechanical properties have been measured using
Vickers Hardness, modulus of rupture and compression
test. The microstructural analysis has been conducted
using SEM to evaluate grain size and its distribution
and porosity. For phase analysis, XRD has been
conducted to determine the phases in a sample. For
electrical properties, non linear coefficient, breakdown
voltage, clamping ratio, power loss, CV, dielectric
constant and leakage current will be evaluated. The
analysis will be completed by identifying the types
of dopants to be used and optimizing the amount.
The types and level of binder needed for processing
of varistor powder will also be optimized so that the
materials developed can be used in integrated circuits
for low voltage application. The optimal properties
will ultimately lead to the development of a high
performance TiO2 base varistor material.
Project Leader: Sharifah Azwa Bte Shaaya
Funding: FRGS (RM 75,680.00)
Contact address: Shazwa@uniten.edu.my
Modeling the Feasibility of Renewable
Energy Power Plants by Meteorological
Forecasting Data
The world enters a new era of energy consciousness
and utilities are facing unprecedented challenges
to support the needs of electricity for industrial,
commercial and residential sectors. The international
arena is reshaping utility company to play a more
important role Renewable Energy (RE) as a key
strategic direction of constructing smart grid, thus
to deal with global warming and energy depletion.
Despite positive attributes of RE resources, the
potential has not been sufficiently utilized due to
a number of reasons. Firstly, there is uncertainty in
respect of the technological development to convert
the RE resources into usable forms. Also uncertainty of
getting ample sunlight or wind for the RE power plants
exist due to climate change. Secondly, there is a lack
of reliable information on the potential supply of RE
at the national level. For instance, the availability of
solar plant is not easy to be computed for the proper
weather forecasting in terms of sunlight, seasonal
change, etc. Thirdly, there is no communication and
management between grid power and RE power.
Fourthly, there seems to be little public demand for
energy from renewable resources because of feeble
public awareness on the positive attributes of RE.
Furthermore, the estimation of relative return cost
of setting up RE may not be possible to calculate
optimally due to lack of relative electricity production
information from RE which discourage the public in
utilizing RE. The major contribution of this research
is to develop a new and systematic methodology for
long and short term production of electricity from the
PV power plant through forecasting. Also the peak
electricity demand and forecast electricity production
from PV plant are included for decision making of
optimal scheduling. The key features of the research
include providing information for PV power plant
of reduced carbon emission, return of power plant
establishment cost, multistage and multi object cost
optimization through forecasted report. Furthermore,
a simulation test bench for communication sensor
network among power plants and secured database
system plan for real time managing data is appended
in this research.
Figure 1
65
Project Leader: Tan Ee Sann
Funding: FRGS
Contact address: eesann@uniten.edu.my
Fundamental Study of Atomization
Characteristics of Biodiesel for
Power Generation
The world is facing critical energy concern, in view
of depleting fossil fuel reserves and increasing
environment pollution. Biodiesel is a promising
substitute that can reduce our dependence on
fossil fuel. Biodiesel is a clean burning liquid fuel
produced from renewable resources, enabling a
sustainable energy for the future. The application of
biodiesel in gas turbines and microturbines is a new
approach in the power generation industry. There are
limited data at present on the potential of biodiesel
in non-transportation sectors, where substantial
energy and environment benefits exist. Biodiesel is
renewable and has two major advantages which is
the increase in performance and help to decrease
harmful emissions caused by power generation
sector. The objective of this research is to study the
feasibility of biodiesel in gas turbine through the
investigation of the atomization characteristics. In
order to conduct this study, five various blends of
distillate and biodiesel will be tested to investigate
the spray atomization characteristics that will give an
impact to the performance and the emission. Thus,
Diesel, B20, B50, B80 and B100 will be tested to study
66
the spray characteristics which are spray angle, spray
pattern, spray tip penetration, spray width and Sauter
Mean Diameter (SMD). The test will be conducted at
various injection pressures starting from 1 bar until
5 bar and a digital imaging camera will be used to
capture the spray. Computational Fluid Dynamics
(CFD) software is used to validate the experimental
results. Spray characteristics can also be obtained
from the CFD simulation and comparison are made
between experimental and simulation results. The
higher content of biodiesel gives higher density,
viscosity and surface tension of the fuel as can be
determined from the chemical fuel properties testing
results. Thus, this result in a larger droplet size/SMD
and longer spray length but smaller spray angle and
spray width for biodiesel. Meanwhile, higher injection
pressure during atomization testing process tend to
break up fuel particles into smaller partition, which
will subsequently produce larger spray angle and
spray width but shorter spray length with denser
spray pattern.
Project Leader: Dr. Theresa Yeo Wee Sing
Contact address: weesing@uniten.edu.my
Study of Allotropic Phase
Transformation Mechanism in Mechanical
Milled Alumina-Cobalt Nanocomposite
The development in superalloys is spurred by the
demand of aircraft and industrial gas turbine designers
to increase the thermal efficiency of their engines
by continuously raising the gas inlet temperatures
and thereby increasing the metal temperatures. The
results of this development have led to alloy chemistry
and processing methods with the goal of utilizing all
the strengthening mechanisms known today. The
phase transformation has observed in cobalt when
subjected to mechanical alloying (MA). However, there
is little information on the influence of allotropic
phase transformation on the mechanical properties
has been found for cobalt-based nanocomposite.
Several observations have found that the stability and
amount of the mixture of fcc and hcp crystal structure
play an important role in controlling the mechanical
properties of pure cobalt and commercial cobalt based
alloy. This has not been systematically investigated
and a clear understanding of microstructure-property
relationship has yet to be established, particularly on
how mechanical behaviour is influenced by allotropic
phase composition. As such, the primary objective
of this research is to investigate the allotropic phase
transformation mechanism in mechanical milled
alumina-cobalt nanocomposite.
67
Project Leader: Dr. Woon Hai Song
Funding: e-Science (RM 149,200.00)
Contact address: hwoon@uniten.edu.my
The Recycling of Local Steel Mill
By-product (Mill Scale) into High
Industry Grade Permanent Magnets
During the manufacture of billets and sheets of steel,
flakes of impure iron oxide waste are washed away
from the surfaces of the steel by cooling water. The
flakes are known as mill scale (iron oxide waste).
Apart from its limited uses as manhole pigments and
soft-ground fillers, the mill scale has not been much
utilized for anything else. It is estimated that the
Malaysia steel mills, taken together, have in excess
of 7,000,000 metric tons of mill scale piled up in
their factory yards with about 850,000 tons being
added to that amount every year. In this project, we
attempt to convert the mill scale, which is rich in
defective wustite (FeO) and magnetite (Fe3O4), to
the technologically and commercially important
hematite (Fe2O3). Although pure hematite by itself
is a commercial product, its use in the manufacture
of technological products is where its value-added
advantage is more significant. Hence, the wastederived hematite is used as raw material to make
permanent magnets (hard ferrites). A low-cost mill
scale-to-hematite conversion process has been
Figure 1
68
developed on a laboratory scale in UNITEN. New
purifying method is also needed to be designed in
order to obtain high quality hematite.
Isotropic hard ferrite or commonly known as
permanent magnet was fabricated using wastederived hematite as raw material. The magnetic
properties of the product such as maximum-energyproduct (BH)max, remanence and coercivity are 0.99
MGOe, 1941 Gauss and 5321 Oe respectively. The
values show that the waste-derived permanent
magnet is as good as an industrial grade permanent
magnet. The waste-derived permanent magnet may
find its applications as component of a DC motor,
loud-speaker, toy, holding material and etc. The
hysteresis-graph of the waste-derived permanent
magnet is shown below:
Figure 2
Project Leader: Dr. Yap Boon Kar
Contact address: kbyap@uniten.edu.my
Flux Cleaning Process for
Flip-Chip Chip-Scale-Package (FC CSP)
This work performs the evaluation and characterizations
of the cleaning the organic residues on Flip Chip
Ceramic Ball Grid Array (FCCBGA) package. Flux
used for Control Collapse Chip Connection (C4) die
attachment during assemblies could remain on the
die surface as organic residues, thus affecting the
integrated circuit performance. Therefore, the effect
of implementation flux-cleaning process on the die
cleanliness was evaluated. Design of Experiments
(DOE) for cleaning chemical parameters using waterbased solvents was carried out to investigate the fluxcleaning efficiency. The response for the experiments
conducted was die surface cleanliness. The presence
and levels of contaminations would be analyzed and
characterized using Scanning Electron Microscope
(SEM), Fourier Transform Infrared Spectroscopy (FTIR)
and Ion chromatography (IC). The optimization process
required the integration between mechanical and
chemical parameters. Chemical cleaning parameters
optimization was aided with Micro Phase Cleaning
(MPC) as solvent. Wash temperature and solvent
concentration were varied to find the optimal cleaning.
Whilst for mechanical parameters, washing pressure,
and nozzle orientation are the expected parameters
that would give impact to the cleaning process. From
the experiments, the cleaning process is optimized
with 3% of MPC solvent added into the pure DI
water with longer wash exposure time 0.3 m/min at
10 Psi with 75˚C. The optimization result is proven
with thermal cycle testing where no delamination
or voids are detected even after 2500x.
Figure 1: The water jet spray patterns and results for the nozzle
angle 45˚ and 90˚
69
Research Directory
College of Information
Technology
RESEARCH DIRECTORY: COLLEGE of INFORMATION TECHNOLOGY
NO
PROJECT LEADER
TITLE
PAGE
1
Azhana Ahmad, Dr.
Formulating Norms Detection and Assimilation in Multi-agent
Systems
72
2
Chen Soong Der, Dr.
Image Quality Metric for Real-Time Video Contrast
Enhancement
73
3
Hajar Mat Jani, Dr.
Enhancing Software Requirements Quality Analysis Using
Case-Based Reasoning and Neural Network
74
4
Mohd Sharifuddin
Ahmad, Assoc. Prof. Dr.
Modeling the Emergence of Collective Intelligence in Multiagent Communities
75
5
Norziana Jamil
Exploration of A New Method For Constructing
Cryptographically Strong Boolean Functions Using
Biologically Inspired System
76
6
Suhaimi Ab. Rahman
Thematic Relations Approach for Detecting Head Modifier
Compound Nouns (CN) in Malay Sentence
77
7
Yunus bin Yusoff
Authorship Attribution Algorithm based on Hadith
Authentication Techniques (matn verification) for Computer
Forensics
78
8
Asmidar Abu Bakar, Dr.
Formulating Privacy Access Control Model for Mobile Ad-hoc
Network (MANET) in Emergency Services
79
9
Mohammed Azlan Bin
Mohamed Iqbal. Dr.
A Computational Model of Human Creativity in a High
Complexity Domain
80
71
2013
Project Leader: Dr. Azhana Ahmad
Contact address: Azhana@uniten.edu.my
Formulating Norms Detection and
Assimilation in Multi-agent Systems
In software agent environments, norms are soft
constraints that regulate the behaviours of agents
and their interactions with other agents in achieving
a shared goal. Such imposed restriction manifests a
benevolent social structure in multi-agent systems.
However, in an open cyber world in which agents
roam in cyberspace to achieve some intended goal,
a visitor agent, which is not normally constrained
by some normative protocol could be driven by
malicious intentions to undermine the integrity of
the host system by posing hostile requests for local
services and resources. While such requests could
be totally ignored or granted due to some prevailing
(non-normative) trust mechanism, a more proactive
approach would provide an alternative solution to
this problem. To develop such solution, we propose
a novel architecture for software agents that detect
and assimilate their behaviours to comply with the
local normative protocol, failing which, the visitor
agent is refused services and resources. In this
architecture, a software agent is equipped with an
algorithm, which detects and analyzes the normative
interactions between local agents. If and when the
detection is successful, an assimilation request
algorithm is launched to ensure the visitor agent is
contrained to the local normative protocol, indicating
its acceptance to the group of local agents.
The objectives of this research are to develop a novel
theory of norms detection and assimilation and to
subsequently formulate algorithms for an agent to
detect the normative protocol in a group of agents
and assimilate the norms to its repertoire of functions.
The research methodology is as follows: Identify and
select a suitable domain for this research; review
the literature in multi-agent systems and normative
frameworks; identify and formalize suitable primitives
for norms detection and assimilation; and develop
algorithms using the primitives. The main outcome
72
of this research is a logical theory of norms detection
and assimilation and a set of algorithms that detects
norm interactions in a group of agents and assimilates
the norms as part of its functions.
Figure 1
In this research, we introduce the concept of norms
model matching in which a visitor agent attempts
to detect the norms (1) (see Figure 1) of a group
of host agents by analyzing the agents’ interaction
pattern and matching that pattern with those that
are available in its norms model base (2). The model
base consists of a repository of norms models of all
normative frameworks. If there is a match, the visitor
agent launches an assimilation request algorithm
(3). If the request is granted (4), the visitor agent is
allowed to assimilate with the local agents’ norms (5).
If there is no match, the agent continuously attempt
to resolve the model of the host’s norms. If and when
the matching is successful, the agent then request
for assimilation. Otherwise, either the visitor agent
is unable to access the host’s services and resources
or normal non-normative access is assumed. In the
latter case, the host system is not considered to have
a normative protocol installed.
The communication protocol used by the visitor agent
to communicate with the facilitator agent is assumed
to be the FIPA agent communication language (ACL),
which is a standard protocol.
Project Leader: Dr. Chen Soong Der
Funding: PRGS (RM30,600)
Contact address: chensoong@uniten.edu.my
Image Quality Metric for Real-Time Video
Contrast Enhancement
Contrast enhancement can cause annoying
distortions to images which are not acceptable in
consumer electronics and video editing. To solve
this problem effectively, it is essential for CE method
to automatically optimize the quality of contrast
enhanced images (CEI). The optimization requires
an Image Quality Metric (IQM) which can accurately
predict human judgment of the quality of CEI. The
reserach has successfully designed a new IQM
which outperforms the existing prominent IQMs.
Figure 1
However, for commercialization, the new IQM requires
optimization in terms of speed in real-time video
contrast enhancement. This research proposes to
detect noise by measuring the difference with efficient
computation. Evaluation results show the new IQM
is not only better in terms of prediction accuracy,
but also it is 10 times faster than the current IQM.
Figure 2
Figure 3
73
2013
Project Leader: Dr. Hajar Mat Jani
Contact address: hajar@uniten.edu.my
Enhancing Software Requirements Quality
Analysis Using Case-Based Reasoning and
Neural Network
Software Requirements Specifications (SRS) or
software requirements are basically an organization’s
interpretation of a customer’s system requirements
and dependencies at a given point in time. The
requirements specifications phase of the software
development life cycle (SDLC) is the main focus of
this research study because if errors are found during
this phase, then the cost of correcting the errors is
going to be less. The Software Quality Assurance
audit technique is used to determine whether or
not the required standards within the requirements
specifications phase are being followed closely. The
main objective of performing a quality analysis of
the SRS is to ensure that the software requirements
among others are complete, consistent, correct,
modifiable, ranked, traceable, unambiguous, and
understandable. In this research, a new hybrid
approach that combines case-based reasoning (CBR)
and neural network techniques is applied. The
hybrid approach is used in improving the process of
analyzing the quality of a given SRS document for a
specific project. The CBR technique is used to evaluate
the requirements quality by referring to previously
stored software requirements quality analysis cases
(past experiences). CBR is an artificial intelligence
technique that reasons by remembering previously
experienced cases, and this technique will speed up
the quality analysis process. The main steps within
a CBR cycle are retrieve, reuse, revise, and retain.
Neural Network (Artificial Neural Network or ANN)
is the type of information processing paradigm that
is inspired by the way biological nervous systems
(brain) process information. It is composed of a large
group of interconnected processing elements that
works towards solving a given set of problems. Neural
network technique works well with CBR because it
also uses examples to solve problems. The new hybrid
approach proposed in this research aims at enhancing
and improving the approach to analyzing SRS quality.
An algorithm that implements the hybrid approach
is the main outcome of this research.
Figure 1: Framework of the Proposed Approach
74
Project Leader: Assoc. Prof. Dr. Mohd Sharifuddin Ahmad
Contact address: sharif@uniten.edu.my
Modeling the Emergence of Collective
Intelligence in Multi-agent Communities
Intelligence can be defined as the ability to think
logically, conceptualize and abstract from reality.
While artificial intelligence explores the mystery of
such intelligence, the study of human behavior and
social interactions pose significant challenges in
analyzing emerging collective intelligence (CI) within
a community of workers. A number of research works
investigates the characteristics of collaboration to
improve the process or to design the required tools
for collaboration. However, very few are found to
investigate potential intelligence that emerges out of
the collaboration and whether such intelligence could
be exploited in improving future collaborative work.
The research attempts to: (i) Investigate the concept
and theory of collective intelligence, (ii) Analyze
the outcome of interactions between collaborating
entities that lead to the emergence of collective
intelligence, (iii) Formulate a model of emergence
of collective intelligence for enhanced multi-agent
performance.
Figure 1
75
2013
Project Leader: Norziana Jamil
Contact address: Norziana@uniten.edu.my
Exploration of A New Method
For Constructing Cryptographically Strong
Boolean Functions Using Biologically
Inspired System
The main goal of cryptography is to protect some
important information against, for example,
multinational corporations or any kind of organized
criminals. Protection is done by encrypting
confidential information into unrecognizable
message. Encryption algorithm consists of non-linear
Boolean functions and technically, there are four
important security properties in constructing ‘good’
Boolean functions namely, balance, high nonlinearity,
high algebraic degree and correlation immunity.
At the moment there are two ways of constructing
‘good’ Boolean functions for a cryptosystem, namely
random generation and direct construction. Both of
these methods construct the functions from scratch
but they have drawbacks. They can produce Boolean
functions that are optimum with regard to the
designed property but they may be weak for other
cryptographic criteria. The result from the literature
shows that it is difficult to find Boolean functions
achieving all security properties by constructing them
from scratch but this is the only available method at
the moment. We work the other way round. We take
another approach in constructing ‘good’ Boolean
cryptographic functions by considering weak Boolean
functions (already constructed Boolean functions)
76
rather than constructing them from scratch. For this
purpose, we consider Cellular Automata (CA) rules
that can be represented in Boolean forms. To date,
there is no research work found to construct ‘good’
cryptographic Boolean functions from the ‘weak’
ones. Based on our FRGS Phase 2 2010/11 project,
we found out that CA rules are very interesting
where we managed to extract 11 out of 256 rules
exhibiting cryptographically strong properties. For
the purpose of re-constructing the CA rules that we
have identified in our FRGS project, we have identified
a few biologically-inspired systems that are going to
be explored and modeled namely immune system
and neural network. Both of these systems have
successfully been implemented in biomedical area.
Their metaphors will be modeled into binary truth
table before the ‘weak’ functions being mapped on.
The metaphors in the systems perform balancing and
random properties in a natural way. This behavior
is expected to give a great impact in constructing
‘good’ Boolean functions satisfying all the security
properties.
2013
Project Leader: Suhaimi Ab. Rahman
Contact address: smie@uniten.edu.my
Thematic Relations Approach for
Detecting Head Modifier Compound
Nouns (CN) in Malay Sentence
Studying in a compound noun area is very important
to see the dependency of the word that can produce
a correct meaning of the sentence. Each complete
sentence in Malay must have their respective compound
nouns. The compound nouns can be extracted from a
subject and predicate of the sentences. The subject
must consist of noun phrase, while the predicate may
have one of the verb phrases, adjective phrases or
preposition phrases. In a compound noun structure,
we may know the head and modifier of the sentences.
The compound noun has been discussed in detail
by the experts of our native language. Many issues
were highlighted to further strengthen of the concept
compound noun. Based on the issues discussed, we
attempt to do research and development to derive
the concepts using suitable techniques with the help
of a computer to do the processing. The compound
nouns extracted are important to be used in detecting
head modifier in Malay sentences. The detection of
head modifier is determined by choosing a suitable
thematic relation defined in our studies. System flow of the process
Process flow diagrams should include the information
regarding the connection between various components
or modules. As illustrated in Figure 1, the process starts
with entering a Malay input sentence. The process
starts with breaking a stream of text up into words.
This process is to filter any unrecognised symbols or
punctuations exist in the input sentence. All tokenised
words will be assigned with their respective Malay Partof-Speech (POS) inferring from Malay POS database.
This is done using a word tagger module. The output
generated from this tagging process is shown in the
following example:
Input sentence:
Orang itu seorang ulama besar
Output sentence:
Orang[KN] itu[KN]seorang[KN] ulama[KN] besar[KA]
The tagged word produced will goes to compound
noun extractor. In this process, a sentence is divided
into two parts: subject and predicate. The compound
noun in subject and predicate are determine with
rules defined in our studies.
The example of compound noun extracted is as follows:
CN i=0 : (orang[KN], itu[KN])
CN i=1 : (ulama[KN], besar[KA])
The position of head and modifier in compound noun
are determine using Thematic Relation created from
our studies.
The following is an example of the output for thematic
CN i=1 : (ulama[KN], besar[KA]) relation
in compound
noun discussed above:
Post-determiner-for
(orang[KN,
head],
itu[KN,
modifier])
The position of head and modifier in compound noun are determine using Thematic Relation created from our studies. Adjectival-for
(ulama[KN, head],besar[KA, modifier])
The following is an example of the output for thematic relation in compound noun discussed above: Post-‐determiner-‐for (orang[KN, head], itu[KN, modifier]) Adjectival-‐for (ulama[KN, head],besar[KA, modifier]) Input sentence :
Input text: Orang itu seorang ulama besar.
A Malay simple sentence Word Tokenizer Malay POS Word Tagger Database Compound Noun Extractor Malay grammar rules Thematic Relation Detector Head Modifier Bracketing Structure Generator Thematic Relation Database Output text:
Structure of head modifier relationships in a Malay Noun Phrase: Output : ((orang[KN], head, post-‐determiner-‐
for] itu[KN, modifier]) (seorang[KN, modifier] (ulama[KN, head, adjectival-‐
for] besar[KA, modifier]))) Figure 1: System flow of the process Figure 1: System flow of the process
77
External Fund Holders College of Information Technology Project Leader: Yunus Bin Yusoff
Funding: FRGS
Contact address: Yunusy@uniten.edu.my
Authorship Attribution Algorithm based on Authorship
Attribution
Algorithm(matn Hadith Authentication Techniques based on Hadith Authentication
verification) for Computer Forensics Techniques
(matn
verification)
for
Project Leader: Yunus Bin Yusoff Funding: Fundamental Research Grant Scheme (FRGS) Contact address: Yunusy@uniten.edu.my The challenge of using stylometry in email
Hadith authentication. It is of our intention to extract
environment is largely due to the limited size of
and apply the techniques used in Hadith content
The challenge of using stylometry in email environment is largely due to the limited size of email email content. Inadequate email textual content
verification to improve the current shortcomings
content. Inadequate email textual content does present a significant difficulty to the current stylometry does
present
a
significant
difficulty
to
the
current
related
email authorship
attribution.
techniques. There exists a similar scenario in another to
knowledge domain, known as Hadith stylometry
techniques.
There
exists
a
similar
authentication. It is of our intention to extract and apply the techniques used in Hadith content scenario
in another
knowledge
domain,
known as
verification to improve the current shortcomings related to email authorship attribution. Computer Forensics
Hadith Email Authorship attribution technique Content verification technique Author identified Project Objectives To assess the applicability of authorship identification using sytlometric techniques in email forensic domain. Project
Objectives
Potential Application
To assess
extract the applicable content identification
(matn) verification techniques within hadith toauthentication To
the applicability
of authorship
The new
and improved
algorithm
ascertain email
methodology. using
sytlometric techniques in email forensic domain.
authorship can be useful to assist in the investigation
To develop improved content
algorithm for averification
uthorship attribution of eusing
mail m
essages. To
extract
thean applicable
(matn)
of crimes
email
facilities. It can also be used
techniques
within hadith authentication methodology.
as an alternative method to combat email spams.
Potential To
developApplication an improved algorithm for authorship
The new and improved algorithm to ascertain email authorship can be useful to assist in the attribution
of email
messages.
investigation of crimes using email facilities. It can also be used as an alternative method to combat email spams. 78
Project Leader: Dr. Asmidar Abu Bakar
Contact address: Asmidar@uniten.edu.my
Formulating Privacy Access
Control Model for Mobile
Ad-hoc Network (MANET) in
Emergency Services
Mobile ad hoc networks (MANETs), which can be
formed by groups of portable devices, cultivate
new research trend in today’s computing. MANET’s
unique features such as scalability, fault tolerant
and autonomous system allowed the network to be
setup with or without any trusted authority. These
features make it suitable for many applications in
military and also commercial such as in emergency
and rescue operations. During emergency situations,
the needs of sharing the information among the
rescuers are enormously vital. However, since this
network is operated based on wireless environment,
it is vulnerable to threats and intruders. Information
flow in MANET can be intercepted and tampered and
this raised a security issues such as confidentiality,
integrity, non-repudiation and also privacy. Privacy
issues are the main concern since personal data
cannot be shared by all rescuers. Privacy is a state or
condition of limited access to a person personal data
and it relates to an individual’s right to determine
how, when and to what extent the information
about the person can be released to another person
or organization. The objective of this research is
to formulate a privacy access control model that
will ensure access to information in emergency
environment constructed using MANET is secure and
preserved one person’s secrecy.
79
2013
Project Leader: Dr. Mohammed Azlan Bin Mohamed Iqbal
Funding: MOSTI eScienceFund (RM 126,550.00)
Contact address: azlan@uniten.edu.m
A Computational Model
of Human Creativity in a
High Complexity Domain
Since beauty is one of the main criteria when it
comes to the quality of chess compositions (i.e.
problems or puzzles that have unique and creative
solutions - considered works of art in the game). The
study investigates if existing aesthetics recognition
technology can be applied at the ‘knowledge
level’ using a new computational model so that
the computer can compose problems of its own problems of comparable quality to those of the best
80
human composers. This would be the evidence of
‘creativity’ by a machine. We also want to see if the
computational model of creativity - like artificial
neural networks (ANNs) - can then be extended to
other domains to solve interesting and challenging
problems (too difficult for humans).
Research Directory
College of Business
Management and
Accounting
NO
PROJECT LEADER
TITLE
1
Sharifah Buniamin
Driving Sustainability Through Green Government
Procurement: Developing An Effective Model
82
2
Shahrul Nizam Salahudin,
Dr.
Carbon Footprint Calculator: Exploring Carbon Emission
Measurement Tool of Malaysian Mobile Telecommunications
Industry
83
82
PAGE
RESEARCH DIRECTORY: COLLEGE of BUSINESS MANAGEMENT and ACCOUNTING
Project Leader: Sharifah Buniamin
Funding: FRGS
Contact address: sharifah@uniten.edu.my
Driving Sustainability through
Green Government Procurement:
Developing An Effective Model
Green Government Procurement (GGP) is a very new
concept in Malaysia. With increasing environmental
issues, the effective implementation of green
government procurement is required. Among
the fundamental principles in GGP strategy are;
consideration of necessity before purchasing; concern
on th environmental impact of a product at all stages
of its life cycle; and consideration on the corporation’s
and distributors’ environmental performance.
(GPNM, 2011). Such an approach could help promote
the goal of sustainable development and address
environmental issues through procurement and
facilitating the use of environmentally friendly
products and services. This study aims to explore
the perception of the Malaysian Public Enterprises
towards the benefit of implementing green
government procurement. It is also aimed to examine
the level of green government procurement practice
and investigate the barriers in practicing the strategy.
Finally, the study intends to identify the new factors
which are perceived to be effective government’s role
in advancing green government procurement not
only to the public sector but also private sector and
civil society. This study addresses the issues based
on the samples from Malaysian public enterprises at
Federal level which are classified into statutory and
non-statutory bodies. Data will be obtained using
self develop questionnaire survey and interview.
The findings of the study are expected to create
awareness about green government procurement
and providing information on the practices among
Malaysian Public Enterprises. In addition, the results
could be the baseline to improve national capability
and capacity in green government procurement and
consequently support the environmental sustainable
development program.
83
2013
Project Leader: Dr. Shahrul Nizam Salahudin
Contact address: ShahrulN@uniten.edu.my
Carbon Footprint Calculator:
Exploring Carbon Emission
Measurement Tool of Malaysian
Mobile Telecommunications Industry
Increase in carbon emissions will cause serious
environmental problems and limit sustainable
economic development. There is a need to look
into methods of measuring carbon emission that
will help in policy and guidelines development.
This study proposes to measure carbon emission in
Malaysian Telecommunication industry. Based on
literature reviews, this study identifies processes in
the telecommunication that contribute to carbon
emissions released. Consequently, a Malaysian Carbon
footprint calculator will be developed. A careful
84
process of selection criteria for the most appropriate
carbon calculator will be determined. Later, data
collected from the industry will be used to test and
validate this calculator. The expected results illustrate
carbon sources and how much carbon release in the
telecommunication industry.
Carbon Calculator website Address (in progress):
http://haroon-rashid.info/digooo/cal/index.php
Research Directory
College of Foundation
and General Studies
PROJECT LEADER
TITLE
1
Abu Bakar Musa, Assoc.
Prof. Dr.
Wave Propagation in Viscoelastic Material using Standard
Linear Solid Model
86
2
Mastura Johar, Dr.
Effect of Group Dance Therapy Intervention on Psychological
Health among Sedentary Adults
87
86
PAGE
RESEARCH DIRECTORY: COLLEGE of FOUNDATION and GENERAL STUDIES 2013
Project Leader: Assoc. Prof. Dr. Abu Bakar Musa
Contact address: bakar@uniten.edu.my
Wave Propagation in
Viscoelastic Material using
Standard Linear Solid Model
The studies is about the propagation of waves through
a short rod (or slug) of viscoelastic material. The
viscoelastic materials are modeled as standard linear
solids which involve three (3) material parameters
and the motion is treated as one-dimensional. In
these studies, a viscoelastic slug is placed between
two semi-infinite elastic rods and a wave initiated
in the first rod is transmitted through the slug
into the second rod. The objective is to relate the
transmitted signal to the material parameters of
the slug. We solve the governing system of partial
differential equations using Laplace transform. We
invert the Laplace transformed solution numerically
to obtain the transmitted signal for several viscosity
Figure 1
time constants and ratios of acoustic impedances.
In inverting the Laplace transformed equations, we
used the complex inversion formula because there
is a branch cut and infinitely many poles within
the Bromwich contour. Finally, we discussed the
relationship between the viscosity time constants,
ratios of acoustic impedances and the results of the
interface velocity discontinuities.
Figure 1 shows the 3-parameter model whereas
Figure2 depicts the flow of the viscoelastic wave in
the viscoelastic material. Figure 4 shows the Bromwich
contour used in the complex inversion integrals of
Laplace Transform.
Figure 2
Figure 4
Figure 3
Figure 5
Wave propagation in viscoelastic rods using standard
linear solid model for several ratio of acoustic
impedances and viscosity time constants.
Figure 6
87
Project Leader: Dr. Hajjah Mastura Johar
Contact address: mastura@uniten.edu.my
EFFECT OF GROUP DANCE THERAPY
INTERVENTION ON PSYCHOLOGICAL
HEALTH AMONG SEDENTARY ADULTS
The purpose of this investigation is to evaluate the
effect of a 12-week group dance therapy intervention
in the treatment of emotional response of total stress
score among sedentary adults in higher education
organization. Forty subjects were undergraduate
Engineering students from Universiti Tenaga Nasional.
Subjects were between the ages of 19 and 30 years
who had a diagnosis of total stress score above the
mean, were not enrolled in any exercise programs
over the period of one year (sedentary), overweight
(Body Mass Index above 25) and had a cardiovascular
endurance score below the mean. Subjects were
randomly assigned to either a 12-week low intensity
dance therapy intervention (“SenamSeri”) or a
conventional aerobics dance exercise as the control
group. A pretest-posttest control research design was
utilized. Both groups met for 50 minutes per session,
three times a week (36 sessions). The Transactional
Approach Multidimensional (Derogatis Stress Profile)
88
examined the emotional response sub-scale of total
stress score. Statistical analysis included (group x time)
repeated measures ANOVA to determine between
and within group mean differences. The hypotheses
of the study showed significant value. There were
statistically significant differences between*group
effect (between treatment and control groups) on the
combined dependent variables: F (4, 35) = 20.79, p
< .01, eta square = .790. An inspection of the mean
scores indicated that treatment group reported an
improvement for TSS (M = 39.0, SD = 1.15), Hostility
sub-scale (M = 47.70, SD = 3.34), Anxiety sub-scale (M
= 35.65, SD = 3.64) and for depression sub-scale (M
= 35.65, SD = 2.58). It is concluded that low intensity
dance therapy exercise intervention of “SenamSeri”
has contributed greatly to the positive findings
concerning the emotional responses of total stress
score among sedentary adults in higher education.
Figure 1
Figure 2
Figure 3
Figure 4
Research Funds
External Funds
Science Funds
NO.
PROJECT LEADER
College of Engineering (COE)
PROJECT’S TITLE
E-MAIL ADDRESS
1
Ewe Lay Sheng, Dr.
Fabrication of New Read Head for Magnetic Recording
Devices Based High Sintering Magnetoresistive
Perovskite Manganites
Laysheng@uniten.edu.my
2
Faris Tarlochan, Assoc. Prof.
Dr.
A Novel Frontal Car Design Concept to
Mitigate Pedestrian Casualities and to Improve
Crashworthiness
Rameshjit@uniten.edu.my
3
Ibrahim bin Hussein, Dato’
Prof. Ir. Dr.
Development of Low Cost Low Head Reaction Turbine
for Micro Hydro Application
4
Johnny Koh Siaw Paw,
Assoc. Prof. Dr.
Development of a Electromagnetism-Like (EM)
Embedded Smart Controller for Energy Wastage
Diagnosis and Optimization of Machine Efficiency
5
Khairul Salleh bin Mohamed
Sahari, Assoc. Prof. Dr.
Development of Dexterous Robotic Arm and Hand for
Deformable Object Manipulation
Khairuls@uniten.edu.my
6
Mahmoud Kh. Mahmmoud
Almsafir
The Determinants of Foreign Direct Investment in
Malaysian Industrial Sector (Electrical Mechinary and
Equipment
Mahmoud@uniten.edu.my
7
Mohd Yusri Abd Rahman,
Assoc. Prof. Dr.
Development of a Cadmium Telluride Quantum
Dot Zinc Oxide Sensitized Solar Cell Utilizing Gel
Polymeric Electrolyte
yusri@uniten.edu.my
8
Nasri A. Hamid, Assoc. Prof.
Dr.
Development of a Superconducting Wind Turbine
Generator Prototype for Generation of Electricity
from Wind
Nasri@uniten.edu.my
9
Saifuddin M. Nomanbay,
Assoc. Prof. Dr.
Rapid Synthesis of Carbon Nanotubes by
Microwave Irradiation and its Application in Lipase
Immobilization for Enzyme Mediated Synthesis of
Epoxidized Fatty Acid Esters from Waste Cooking Oil
10
Shahida Begum, Assoc. Prof.
Dr.
Development of High Performance Tio2 Based
Varistor Materials with New Dopants and Binders
11
Tiong Sieh Kiong, Assoc.
Prof. Dr.
IEEE 802.16 (WIMAX) Teletraffic Performance
Improvement by Innovative Smart Antenna System
Ibrahim@uniten.edu.my
JohnnyKoh@uniten.edu.my
Saifuddin@uniten.edu.my
Shahida@uniten.edu.my
Siehkiong@uniten.edu.my
College of Information Technology (COIT)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Mohammed Azlan Mohamed
Iqbal, Dr.
A Computational Model of Human Creativity in a High
Complexity Domain
Azlan@uniten.edu.my
Long-term Research Grant Scheme (LRGS)
NO.
PROJECT LEADER
PROJECT’S TITLE
1
Abd Halim Shamsuddin,
Prof. Ir. Dr.
Sustainable Alternative Solid Biofuel from Biomass
for Carbon Reduction in Coal-Fired Power Plant
Economy
2
Mohd Nor Mohd Desa, Prof.
Urban Ecohydrology for Resilient Environment
(UCOREN)
90
E-MAIL ADDRESS
AbdHalim@uniten.edu.my
MohamedNor@uniten.edu.my
RESEARCH FUNDS: EXTERNAL FUNDS 2013
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Azizah Suliman, Dr.
Decision Models for Flood Disaster Early Warning and
Risk Reduction
Azizah@uniten.edu.my
2
Marini Othman, Dr.
A Novel Approach to Ontology Engineering
Marini@uniten.edu.my
Prototype Research Grant Scheme (PRGS)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Fathoni Usman, Dr.
Value Engineering Advisory System for Building
Construction
Fathoni@uniten.edu.my
2
Kumaran Palanisamy, Ir.
Development of a New System to Produce Second
Generation Biodiesel (SGB) for Power Generator
Application
kumaran@uniten.edu.my
3
Lariyah Mohd Sidek,
Associate Prof. Dr.
Eco-Friendly Integrated Green Technology Expert
System for Sustainable Green Infrastructure (Genius)
Lariyah@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Chen Soong Der, Dr.
Image Quality Metric for Real Time Video Contrast
Enhancement
ChenSoong@uniten.edu.my
2
Norziana Jamil
A Prototype Development of a Micro Cryptographic
Engine in Resource Constrained Devices
Norziana@uniten.edu.my
Fundamental Research Grant Scheme (FRGS)
Phase I, Year 2011
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Halina Misran, Dr.
Preliminary Studies and Synthesis of Nanostructures
Negative Index Metamaterials (NIM)
Halina@uniten.edu.my
2
Khairul Salleh Mohamed
Modelling and Parameters Approximation of Unknown
3D Elastic Deformable Object for Manipulation by Robot
3
Mohd Azree Bin Idris, Assoc.
Prof. Dr.
Experimental and Numerical Investigation Into the New
Governing Equation of Rotating Orifices with Coriolis
Effect
azree@uniten.edu.my
4
Noor Shamsiah Binti
Othman, Dr.
An Investigation of Over-Complete Expansions Algorithm
for Real-Time Wireless Voice Transceiver
5
Siti Fazlili Abdullah, Dr.
Improvement of the Functional Performance of a
Tribotronic System in Industrial Machinery
6
Tan Ee Sann, Dr.
Fundamental Study of Atomization Characteristics of
Biodiesel for Power Generation
Shamsiah@uniten.edu.my
Siti@uniten.edu.my
EeSann@uniten.edu.my
91
College of Foundation and General Studies (CFGS)
NO.
1
PROJECT LEADER
Mastura bt Johar, Dr.
PROJECT’S TITLE
E-MAIL ADDRESS
Effect of Group Dance Theraphy Intervention on
Psychological Health Among Sedentary Adults
Mastura@uniten.edu.my
College of Business Management and Accounting (COBA)
NO.
PROJECT LEADER
PROJECT’S TITLE
1
Shahrul Nizam Salahudin,
Dr.
Carbon Emissions: Carbon Footprint of Malaysian
Telecommunications Industry
2
Wan Muhammad Taufik Bin
Wan Abdullah
Malaysia Public Procurement Integrity : A New Dimension
of Sustainability and Value for Money
3
Zeitty Karmila Bt Kaman
Preliminary Studies and Synthesis of Nanostructures
Negative Index Metamaterials (NIM)
E-MAIL ADDRESS
Shahrul@uniten.edu.my
WMTaufik@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Hajar bt Mat Jani, Dr.
Enhancing Software Requirements Quality Analysis Using
Case-Based Reasoning And Neural Network
Hajar@uniten.edu.my
2
Suhaimi bin Ab.Rahman
Thematic Relations Approach For Detecting Head
Modifier Compound Nouns In Malay Sentence
Smie@uniten.edu.my
3
Yunus bin Yusoff
Authorship Attribution Algorithm Based On Hadith
Authentication Techniques (Matn Verification) For
Computer Forensics
Yunusy@uniten.edu.my
College of Graduate Studies (COGS)
NO.
1
PROJECT LEADER
Abu Bakar Musa, Assoc.
Prof. Dr.
PROJECT’S TITLE
Wave propagation in Viscoelastic Material Using
Standard Linear Solid Model
E-MAIL ADDRESS
Bakar@uniten.edu.my
Phase I, Year 2012
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Analysis of Different Transient Phenomena within
Underground Cables in Sustaining Continuous Power
Delivery
2
Dr. Ir.
Nonlocal Continuum Mechanics Mathematical Model for
Functionally Graded Material Nanostructures
rameshjit@uniten.edu.my
3
Farrukh Nagi, Dr.
DSP Based Fuzzy Logic Controller for Proton’s Hybrid and
Electrical Cars
Farrukh@uniten.edu.my
4
Hasril Hasini, Ir.
Study of Allotropic Phase Transformation Mechanism in
Mechanical Milled Alumina-Cobalt Nanocomposite
Hasril@uniten.edu.my
5
Jawaid Iqbal Inayat-Hussain
Fundamental Research on the Utilization of Chaos Theory
for Diagnosis of Malfunctions in Rotating Machinery
jawaid@uniten.edu.my
6
Marlinda Abdul Malek,
Assoc. Prof. Dr. Ir.
Fundamental Research on the Utilization of Chaos Theory
for Diagnosis of Malfunctions in Rotating Machinery
Marlinda@uniten.edu.my
92
Azrula@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
mfairuz@uniten.edu.my
7
Muhammad Fairuz Abdul
Jalal
DSP Based Fuzzy Logic Controller for Proton’s Hybrid and
Electrical Cars
8
Nadia Tan Mei Lin
An Energy Storage System Based on a Bidirectional
Isolated DC-DC Converter for Output-Power Leveling of
Renewable Energy Source
Nadia@uniten.edu.my
9
Nazaruddin Abdul Rahman
Nonlocal Continuum Mechanics Mathematical Model for
Functionally Graded Material Nanostructures
Nazaruddin@uniten.edu.my
10
Yeo Wee Sing, Dr.
Study of Allotropic Phase Transformation Mechanism in
Mechanical Milled Alumina-Cobalt Nanocomposite
Weesing@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
1
Noriza Mohd Saad
Structuring Sukuk Development and Validating the
Issuances ‘ Characteristics for Malaysian Islamic Capital
Market
2
Sharifah Buniamin
Driving Sustainability Through Green Government
Procurement: Developing an Effective Model
E-MAIL ADDRESS
noriza@uniten.edu.my
Sharifah@uniten.edu.my
Phase I, Year 2013
NO.
PROJECT’S TITLE
E-MAIL ADDRESS
1
Abreeza Noorlina Abd
Manap, Dr.
PROJECT LEADER
Bonding Mechanism Studies of Low-Pressure Cold
Sprayed (LPCS) Light metal Depositions using Smoothed
Particle Hydrodynamics (SPH) Method
abreeza@uniten.edu.my
2
Adzly Anuar
Fundamental Research on Gait Pattern Classification and
Assessment of Quality of Movement in Children with
Cerebral Palsy toward Rehabilitation Using Robot Therapy
adzly@uniten.edu.my
3
Chandan Kumar
Chakrabarty, Prof.
Parametric Study of Curves Antenna on Ultra Wideband
Characteristics and Antenna Properties
Chandan@uniten.edu.my
4
Halina Misran, Dr.
One-Phase Synthesis and Characterizations Studies of a
New “Striped” Nanopockets on Hairy Nanoparticles
halina@uniten.edu.my
5
Johnny Koh Siaw Paw, Ir. Dr.
Modelling on Space Vector Modulation for Three Phase
Induction Motor Matrix Converter
johnnykoh@uniten.edu.my
6
Marayati bt Marsadek
State Space Modelling and Modal Analysis of Solar
Thermal Connected to Power System
7
Mohd Zamri bin Yusoff, Prof.
The effects of Gas Combination on the Performance of
Shock Tunnel and Gun Tunnel
8
Noor Miza bt Muhamad
Razali, Dr.
A stochastic Algorithm for Optimal Generation Planning
of a Microgrid Considering The Uncertainties from
intermittent Renewable Energy
noormiza@uniten.edu.my
9
Norazizah Mohd Aripin, Dr.
Investigation of Cognitive Radio Spectrum Behaviour for
Modelling Smart Grid Network
norazizahm@uniten.edu.my
10
Norhazwani Abd Malek
An Improved Two-Dimensional Viscous Model for High
Speed Two-Phase Condensing Flow Applications
norhazwani@uniten.edu.my
11
Normy Norfiza bt Abdul
Razak, Dr.
Reducing Glycaemic Control Clinical Workload In
The ICU: In-Silico Investigation on the Behaviour of
Subcutaneously Delivered Insulin
normi@uniten.edu.my
12
Nur Irmawati bt Om
Numerical Study on the Fundamentals of the Effect
of Natural Gas and Syngas Quality on Combustion
Performance in Can-Type Combustor
Irmawati@uniten.edu.my
13
Siti Zubaidah bt Othman
Green Synthesis and adsorption Studies of Nanoporous
Metal-Organic Framework (MOF-5) Materials
zubaidah@uniten.edu.my
Marayati@uniten.edu.my
zamri@uniten.edu.my
93
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Chai Mee Kin, Dr.
To Study the Chemical Reactions of Ionic Liquids in
Dispersive Liquid- Liquid Microextraction for the
Extraction of Polycyclic Aromatic Hydrocarbons
mkchai@uniten.edu.my
2
Zolman bin Hari, Dr.
Enhancement of Magnetic Properties of Nizn Ferrite
Derived from Waste Materials From Steel Industry
Through Copper and Cobalt Substitutions
Zolman@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
MRidzuan@uniten.edu.my
1
Mohd Rizuan Abdul Kadir
The Framework of Environmental Management
Accounting (EMA) Towards Achieving Halal Eco-System in
Malaysia
2
Noor Raida bt. Abd. Rahman
The Value Relevance of New Accountability Carbon
Reporting (NACR) Index: Malaysian Evidence
norraida@uniten.edu.my
3
Rusinah Siron, Prof Madya
Developing A System Model of Green Quality of Working
Life
rusinah@uniten.edu.my
4
Zalina Hashim
Developing and Validating Green Value-AttitudeBehavior-Personality(VABP) Model to Curbs
Environmental Pollutions
zalina@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Badariah Solemon, Dr.
A Mobile Crowd Sourcing Platform for Facilitating
Community Crime Watch
badariah@uniten.edu.my
2
Siti Salbiah Mohamed
Shariff, Assoc. Prof. Dr.
Formulation of an Information Audit Concept for the
Electricity Supply Industry
sitisalbiah@uniten.edu.my
3
Zainuddin Hassan, Assoc.
Prof. Dr.
A Formulation of a Framework for Information Exchanged
and Classification for Sustainability and Buildability
Assessments Method Using Artificial Intelligence (AI)
System
Zainuddin@uniten.edu.my
NO.
1
PROJECT LEADER
Alicia Tang Yee Chong, Dr.
FRGS(KeTTHA)
NO.
1
94
PROJECT LEADER
Abu Bakar Hasan
PROJECT’S TITLE
E-MAIL ADDRESS
Formulating a Generic Agent-Based Simulation Model for
Processes in Time-constrained Environment
aliciat@uniten.edu.my
PROJECT’S TITLE
Green fuel: the study on its potential in generating
electrical power based on geothermal and algae
parameters
E-MAIL ADDRESS
abakarh@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
2
Bahisham Yunus, Assoc.
Prof. Dr.
Study on maintaining physical and information
security and integrity in critical energy infrastructure
environment
Bahisham@uniten.edu.my
3
Ibrahim Hussein, Dato’ Prof.
Ir. Dr.
Indoor environmental quality (IEQ) acceptance of
building in Malaysia
4
Izham Zainal Abidin, Assoc.
Prof. Dr.
Study of power system performance and power system
model development in a smart grid condition taking
into account renewable embedded generation sources
and neverse power flow
5
Jagadeesh Pasupuleti,
Assoc. Prof. Dr.
The study of system wide impacts on power system
network when wind generator is connected to power
grid
Jagadeesh@uniten.edu.my
6
Muhamad Mansor, Dr.
Study on combination of hybrid renewable energy (RE)
system for micro grid system in Malaysia
Muhamadm@uniten.edu.my
7
Ong Hang See, Assoc. Prof.
Dr.
Component layer architecture model for virtual
prototyping and simulation of smart grid
Ong@uniten.edu.my
8
Prem Gunasegaran
Inverse heat transfer formulation on compact heat
exchanger using infrared thermography camera
Prem@uniten.edu.my
9
Sharifah Azma Syed
Mustaffa
The effect of plug-in hybrid vehicle charging to
distribution network
10
Sharifah Azwa Shaaya
Modeling the feasibility of renewable energy power
plants by meteorological forecasting data
Ibrahim@uniten.edu.my
Izham@uniten.edu.my
SharifahAzma@uniten.edu.my
Shazwa@uniten.edu.my
Exploratory Research Grant Scheme (ERGS)
Phase I, Year 2011
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Adzly Anuar
Exploratory Research on Using Autonomous Robots to
Visually Inspect Internal Pipe with Variable Cross Section
Entry and Complex Structure Arrangement
Adzly@uniten.edu.my
2
Development of a Simulation Tool to Predict Solar Power
Output based on Real-Time Temperature and Insolation
Measurements
Azrul@uniten.edu.my
3
Farah Hani Nordin, Dr.
A Novel Approach on Non-intrusive Electrical Appliances
Signature Identification using Artificial Intelligence
Assisted Radio Frequency (RF) Scanning Technique
Farah@uniten.edu.my
4
Farrukh Nagi, Assoc. Prof. Dr.
Investigating Insufficient Lubrication Between Metal
Component And Sub-Assemblies Using Ultrasound
Farrukh@uniten.edu.my
5
Ismail Said
Study of Fast-Charger in Off-Grid Solar Charging Station
for Electric Vehicles
Ismails@uniten.edu.my
6
Kannan M. Munisamy, Dr.
Design and Optimization of Guide Vane for Improved
Axial Fan Efficiency
Kannan@uniten.edu.my
7
Md. Mujibur Rahman, Assoc.
Prof. Dr.
Characterization of Sintering Schedule for Warm
Compacted Components
Mujibur@uniten.edu.my
8
Miszaina Osman, Dr.
Evaluation of Fault Current Distribution to Design
Optimized Substation Earthing System
Miszaina@uniten.edu.my
9
Mohd Zamri Yusoff, Prof. Dr.
A Parallel High Resolution Finite Volume Scheme for
Transient High Speed Compressible Fluid Dynamics
Employing Domain Decomposition on Distributed
Memory Architecture
Zamri@uniten.edu.my
95
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
10
Rohayu Che Omar, Dr.
Selection and Application of Micro Bacteria from
Agricultural Waste as Bio-Grout
Rohayu@uniten.edu.my
11
Tuan Ab Rashid bin Tuan
Abdullah, Ir. Dr.
Exploration on the heat impact to indoor transformer
efficiency for smart grid application
TRashid@uniten.edu.my
12
Ungku Anisa Ungku
Amirulddin Al Amin, Dr.
Reluctance Network Modelling for Dynamic Simulation
of Induction Machines
Anisa@uniten.edu.my
NO.
PROJECT LEADER
1
Salina Daud, Assoc. Prof. Dr.
PROJECT’S TITLE
Modelling and Validating a New Firm Carbon Capability
Index Using Supply Chain Approach : Halal Versus NonHalal Certified Firm
E-MAIL ADDRESS
salina@uniten.edu.my
NO.
1
PROJECT LEADER
Azhana Ahmad, Dr.
PROJECT’S TITLE
Formulating Norms Detection and Assimilation in MultiAgent Systems
E-MAIL ADDRESS
Azhana@uniten.edu.my
Phase I, Year 2012
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Hardware Implementation of Adaptive Error Correction
Technique for Wireless Sensor Networks
CLCheah@uniten.edu.my
2
Dr.
An Exploratory Study on Multi-Function Heterogeous
Composite Materials with Applications to Thermal
Comfort and Load Bearing
Rameshjit@uniten.edu.my
3
Khairul Salleh bin Mohamed
Exploratory Research on Parameters Determination
of Robust Robotic Arm Capable of Dexterous Clothes
Manipulation for Home Service Robots
4
Md Ashraful Alam, Dr.
Explore Optimal Method of Strengthening Reinforced
Concrete Structure to Eliminate Premature Debonding
Failures
ashraful@uniten.edu.my
5
Nagaletchumi
Balasubramaniam
Dynamic Integration of WLAN, ZigBee and RFID for
Indoor Location Sensing
6
Yap Boon Kar, Dr.
The Effects of Flux Cleaning Process For Flip Chip
Package Industrial Assembly Lines
Nagaletchumi@uniten.edu.my
KBYap@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Formulating Privacy Access Control Model for Mobile AdHoc Network (MANET) in Emergency Services
Asmidar@uniten.edu.my
2
Norziana Jamil
Exploration of A New Method for Constructing Highly
Non-Linear Cryptographic Boolean Functions Using
Biologically-Inspired Systems
Norziana@uniten.edu.my
96
NO.
1
PROJECT LEADER
Mohd Sharifuddin Ahmad,
Assoc. Prof. Dr.
PROJECT’S TITLE
Modelling the Emergence of Collective Intelligence in
Multi-agent Communities
E-MAIL ADDRESS
Sharif@uniten.edu.my
Phase I, Year 2013
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
Parvez@uniten.edu.my
1
A. K. M. Parvez Iqbal, Dr.
An Intelligent Additional Track Mechanism for Tracked
Vehicle to Improve the Mobility over Swamp Peat Terrain
2
Chau Chien Fat, Dr.
Development of a Memetic Algorithm(MA)-based
Logic Synthesis as an Alternative Design Approach for
Quantum-dot Cellular Automata (QCA) Circuits
3
Kong Sih Ying, Dr.
Hybrid Superelastic Shape Memory Alloys-steel
Reinforcement for Concrete Beams to Achieve Selfrehabilitation Characteristic
4
Lee Choon Yong, Assoc.
Prof. Dr.
Micropiles for Foundation Support and Slope
Stabilisation Systems for Transmission Towers on High
Risk Slopes
Cylee@uniten.edu.my
5
Mohd. Azree bin Idris, Assoc.
Prof. Dr.
Integrating HHO Generator with Ultrasonic Atomiser
to Increase HHO Gas Production for Electrical Power
Generation
azree@uniten.edu.my
6
Norashida Md. Din, Assoc.
Prof. Dr.
Four Wave Mixing Cross Talk Suppression Using
Orthogonal Channel Polarisation in WDM Optical
Networks
7
Norhazwani Abd. Malek
An Improved Nucleation and Droplet Grawth Model for
Accurate Flow Prediction in High Speed Condensing
Steam
8
Saifuddin bin Hj M.
Nomanbay, Assoc. Prof. Dr.
Conversion of Waste Glycerol from Biodiesel
to Bioethanol by Tandem Process of Intensified
Fermentation and Enzymatic Conversion
Saifuddin@uniten.edu.my
9
Siti Zubaidah Othman
Modified Green Synthesis of Metal-organic Framework
(MOF-5) Material Using Renewable Templating Method
for Hazardous Gases Absorption Application
Zubaidah@uniten.edu.my
10
Syed Zainal Abidin bin Syed
Kamarul Bahrin
Design and Development of a Five-Fingered MasterSlave Robotic Hand by Using Solenoids and Pressure
Sensor Comperator Technology for Generating High
Speed Response and Dexterous Motions
11
T. M. Indra Mahlia, Prof.
Enhancement of Non-Edible Tropical Biodiversity
Sources to be Used as Potentian Feedstock for Biofuels
Using Internation Test Procedure
12
Wong Leong Sing, Dr.
Quantifying Biomineralisation Effect of Saccharomy
13
Yip Chan Heng
Novel Pretrement Process Module to Enhance Production
Rate of Biogas from Organic Food Waste
Cchienfat@uniten.edu.my
SihYing@uniten.edu.my
Norashida@uniten.edu.my
Norhazwani@uniten.edu.my
SZainal@uniten.edu.my
Indra@uniten.edu.my
Wongls@uniten.edu.my
Chyip@uniten.edu.my
NO.
1
PROJECT LEADER
Hanim Salleh, Assoc. Prof.
Dr.
PROJECT’S TITLE
Improving the Performance of Inertial Micro Power
Generators Transduction Mechanism by Structural
Modification Using Rubber Compound
E-MAIL ADDRESS
HANIM@uniten.edu.my
97
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Forstering Green Growth through Eco-innovation Using
Partial Least Square Technique in Malaysian Syariah
Compliance Companies
Salina@uniten.edu.my
2
Suzaida Bakar
A New Corporate Bankruptcy Prediction Indicator (CBPI)
for Distress and Non-distress Firms in Malaysia Using a
Robust Hybrid Approach
Suzaida@uniten.edu.my
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
ChenSoong@uniten.edu.my
1
Chen Soong Der, Dr.
Formulating Computational Model of Perceived Image
Naturalness Using Multimodal Probability Distribution of
Natural Images’ Content and Coloour for Solving Problem
of Unnatural Contrast Enhancement
2
Roslan Ismail, Assoc. Prof.
Dr.
Formulation of a Forensic Analysis Algorithm for
Multi Agent Systems Using the Hadith Authentication
Technique to Improve Security in the Multi Agent
Environment
Roslan@uniten.edu.my
3
Salman Yusof, Dr.
Formulation of a Model for Measuring the Costs of
Security and Privacy Breach in Smart Meter Deployment
Salman@uniten.edu.my
NO.
1
PROJECT LEADER
PROJECT’S TITLE
Alicia Tang Yee Chong, Dr.
Formulating Norms Removal theory in Normative Multiagent systems
E-MAIL ADDRESS
Aliciat@uniten.edu.my
ERGS (KeTTHA)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Izham Zainal Abidin, Assoc.
Prof. Dr.
Exploring the potential of intelligent reconfigurable grid
approach in maintaining power system stability
Izham@uniten.edu.my
2
Nadia Tan Mei Lin
Design and development of a compact power supply unit
for LED lighting
Nadia@uniten.edu.my
3
Nur Irmawati Om
Experimental hydrodynamic study of microchannel
heat sink by means of quantitative flow visualization
technique
4
Nur Mazlini Razali
Life cycle assessment study on energy balance &
environmental impact of recycling waste cooking oil into
98
Irmawati@uniten.edu.my
Mazlini@uniten.edu.my
Research Funds
Internal Funds
Internal Grant Holders of College of Engineering (COE)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
Abreeza@uniten.edu.my
1
Abreeza Noorlina bt Abd.
Manap, Dr.
Developing Improved Cold Sprayed CoNiCrAlY Bond Coat
in Thermal Barrier Coating
2
Ahmad Qisti bin Ramli,
Assoc. Prof. Dr.
Investigate Atmospheric Electric Field Activities in
Malaysia Climate to Ascertain the Hazard Level of
Incoming Lightning
Qisti@uniten.edu.my
3
Ayuniza bt Ahmad
Reconfigurable Frequency Notched UWB Antenna
Ayuniza@uniten.edu.my
4
Azrul bin Ghazali
Development of UNITEN’s CMOS 0.13 micron Standard
Cell Library
5
Chau Chien Fat, Dr.
Design Implementation of Quantum-dot Cellular
Automata (QCA)-based Digital Logic Devices
Cchienfat@uniten.edu.my
6
Ean Lee Woen
Effects of Boundary Conditions on the Behavior of Axially
Loaded Sediment Interlocking Brick Wall
LeeWoen@uniten.edu.my
7
Fathoni Usman, Dr.
Torsion and Bending Behaviour of Ferrocement Beam
Reinforced with Fibres
Fathoni@uniten.edu.my
8
Goh Su Mei, Dr.
Numerical Analysis of Chaotic Magnetic Field Generated
by Current Flow in Conducting Wires
Sumei@uniten.edu.my
9
Herda Yati bt Katman
Laboratory Study on the Effect of Chemical Agents on
Properties of Hot Mix Asphalt
Herda@uniten.edu.my
10
Jagadeesh Pasupeliti,
Assoc. Prof. Dr.
Integration of wind power generation and DR program in
power market by considering significant uncertainties
11
Md. Zaini bin Jamaluddin,
Assoc. Prof. Dr.
Modeling and validation of Multiwavelength Brillouin
Raman Fiber Laser
12
Mohamed Ansari M. Nainar,
Dr.
Effect of Cutting Parameters On The Surface Roughness Of
MWCNT Reinforced Epoxy Composite Using End-Milling
Process
13
Muhamad bin Mansor, Dr.
Development of DC/DC Converter Controller for EV Car
Muhamadm@uniten.edu.my
14
Norashidah bt Md. Din,
Assoc. Prof. Dr.
A Framework for Unmanned Aerial Vehicle Area Survey for
Transmission Tower Demarcation
Norashidah@uniten.edu.my
15
Normy Norfiza Binti Abdul
Razak, Dr.
Robust Modeling and Control of Glucose-Insulin
Regulatory System for Highly Dynamic Intensive Care
Patients with Long Acting Insulin Glargine
normy@uniten.edu.my
16
Rohayu bt Che Omar, Dr.
Threshold Based Temporal Probability Response Model
for Natural Hill-Slope Failures
Rohayu@uniten.edu.my
17
Shuhairy Bin Norhisham
Development of Bus Performace Index in Malaysia
18
Improvement of the Functional Performance of a
Tribotronic System in Industrial Machinery
19
Sivakumar Naganathan, Dr.
Effect of micro silica on the preformance of bricks using
bottom ash and fly ash
20
Application of Natural Pozzolan to Produce
Environmentally Sustainable Interlocking Brick
Wongls@uniten.edu.my
21
Yeo Wee Sing, Dr.
The X-ray Diffraction Analysis of Milled Cobalt and Cobaltbased Nanocomposite
weesing@uniten.edu.my
Azrulg@uniten.edu.my
Jagadeesh@uniten.edu.my
mdzaini@uniten.edu.my
Ansari@uniten.edu.my
Shuhairy@uniten.edu.my
Siti@uniten.edu.my
SivaN@uniten.edu.my
Internal Grant Holders of College of Foundation
and General Studies (CFGS)
NO.
1
100
PROJECT LEADER
Betty Voon Wan Niu
PROJECT’S TITLE
Usage of Online Mathematics Assessment Decreases
Math Anxiety of Students
E-MAIL ADDRESS
Betty@uniten.edu.my
RESEARCH FUNDS: INTERNAL FUNDS 2013
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
2
Chong Pui Yee
International Student Learning Experience at Private
Higher Education Institutions in Malaysia
Pychong@uniten.edu.my
3
Chong Seng Tong
Nature in Contemporary Malaysian Literature in English
Stchong@uniten.edu.my
4
Evelyn Yeap Ewe Lin
An Experimental Study on the Effectiveness of Fun
Learning Activities in Coping with Public Speaking
Anxiety
5
Khairul Nizam Bin Mat Karim
Khutbah Jumaat Sebagai Platfom Intra-Dialog: Analisa
Isu-Isu Hubungan Antara Agama dalam Teks Khutbah
Jumaat di Negeri Pahang
6
Lee Yi Ling
Perceptions of novice English teachers in UNITEN towards
peer observation and remarks given by observers
yling@uniten.edu.my
7
Ng Yu Jin
Development of Pedagogic Engineering Word List and
Collocation
yujin@uniten.edu.my
8
Nurulbahiah bt Awang
Pegangan Agama dan Implikasinya terhadap Budaya
Kerja Muslim Uniten
9
Suzy Aziziyana bt Saili
Al-Mawdudi’s View on the Rise and Fall of Civilization:
An Analysis over Selected Commentaries From His Work
“The Meaning of the Qur’an”
suzy@uniten.edu.my
10
Woon Hai Song, Dr.
The Development of Industrial Grade Red Pigment from
Local Industrial Waste and Natural Iron Oxide
Hwoon@uniten.edu.my
11
Yee Chiew Ling @ Vivian
The ICTs Implications for UNITEN Undergraduate
Learning: From the Perspective of Lecturers and Students
Vivian@uniten.edu.my
Evelyn@uniten.edu.my
KhairulNizam@uniten.edu.my
Nurulbahiah@uniten.edu.my
Internal Grant Holders of College of
Business Management and Accounting (COBA)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Azrinawati bt Mohd Remali
@ Abdul Jalil
CSR Disclosure, Corporate Governance and Earning
Management in Malaysian Public Listed Companies
Azrinawati@uniten.edu.my
2
Azwan Abd Rashid
Determinants of Sustainability Reporting: A Case of
Banking Institution in Malaysia
Azwan@uniten.edu.my
3
Baharuddin Muhammad
Hussin
The Influence of Corporate Governance Mechanisms
Towards Derivatives Hedging Policy in Malaysia
BaharM@uniten.edu.my
4
Chan Yee Chuann
Pay-performance Relations of Financially Constrained
Firms: Evidence from Malaysian Firms
5
Elinda bt Esa
Malaysian SMEs Performance: Post Economic
Transformation Programme (ETP)
Elinda@uniten.edu.my
6
Irene Ting Wei Kiong
Ownership Structure, CEO Characteristics and Listed
Companies’ Leverage Decision
Irene@uniten.edu.my
7
Khairul Nizam Bin Surbaini
Investigating the Applicants’ Choice and Study Intention
in Higher Learning Institution (HLIs)
NizamK@uniten.edu.my
8
Kweh Qian Long
Intellectual Capital Performance and Changes in
Productivity: Evidence from Malaysian General Insurance
Industry
Qlkweh@uniten.edu.my
9
Mahiah bt Said
Investigating the Influence of Consumer Congruence on
Their Purchase Intention of Halal Food Products
Mahiah@uniten.edu.my
10
Mahlindayu bt Tarmidi @
Tokhid
Leadership Diversity, Management Accounting Systems
and Corporate Sustainability Performance
Mahlindayu@uniten.edu.my
11
Accounting Practitioners’ Perception on the Practicality
of MASB TRi-1 Accounting for Zakat Business
MRizuan@uniten.edu.my
12
Mohd Zainal Munshid Bin
Harun, Dr.
Application-Predicting Intention to Job Turnover by Using
Motivation Factor in Malaysia Retail Industry
YeeChuann@uniten.edu.my
Zainal@uniten.edu.my
101
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
13
Nik Fanidautty Nik Ab Majid
Will Population, Affluence and Technology Affect
Malaysia Environment? An Analysis of STIRPAT Model
14
Nor Edi Azhar bt Mohamad
An Analysis of Working Capital Management with
Reference to Listed Companies in Bursa Malaysia
15
Nor Hamisham bt Harun
Analysis of the Production Theory for Manufacturing
Industry and Construction Industry in Malaysia
Hamisham@uniten.edu.my
16
Nor Razuana bt Amran
Demographic Factors and Financial literacy to Personal
Retirement Saving Intention (PRSI) among Malaysia in the
East Coast Region
Norrazuana@uniten.edu.my
17
Norfhadzilahwati bt Rahim
Sustainable Growth of Shariah Public Listed Companies
(Plc) Using Capital Structure Choices in an Emerging
Market
18
Noriza Mohd Saad
Performance and Transformation of Malaysian
Government Bond
19
Norkhazimah bt Ahmad
Factors Influencing Whistleblowing Activities among
Government Accountants in Malaysia
Norkhazimah@uniten.edu.my
20
Norsalwati bt Othman
Analyzing The Co-Integration and Causal Relationship
between Trade and Electricity Consumption: Evidence
from Malaysia
Norsalwati@uniten.edu.my
21
Nurul Wahilah bt Hj. Abdul
Latif
Analyzing The Effects of Asymmetric Oil Price Shocks
on Economic Growth and Fiscal Policy Responses in the
Malaysian Economy
22
Rajeswari A/P Devadass
Anger Regulation and Well-Being
23
Analysing Recycle Behaviours of Municipal Solid Waste
Management
Salina@uniten.edu.my
24
Shafazawana bt Mohamed
Tharikh
Psychosocial Work Environment and Employees Mental
Health at Higher Education Institutions
Shafa@uniten.edu.my
25
Suzaida bt Bakar
Predicting Corporate Bankruptcy Using Data Mining
Approaches
26
Tan Kwe Lu
The Determinants of Green Consumerism
27
Wan Mohamad Taufik Bin
Wan Abdullah
Do Directors Share-Based Compensation Enhance
Performance?:Evidence from Shariah Compliant
Companies
28
Zulkifli Bin Zainal Abidin
Establishment of Activity-Based Costing Approach in
Education Industry: Case Study in UNITEN
Fanidautty@uniten.edu.my
NorEdi@uniten.edu.my
Norfhadzilah@uniten.edu.my
Noriza@uniten.edu.my
NurulWahilah@uniten.edu.my
Rajeswari@uniten.edu.my
Suzaida@uniten.edu.my
tan@uniten.edu.my
WMTaufik@uniten.edu.my
ZZulkifli@uniten.edu.my
Internal Grant Holders of College of
Information Technology (COIT)
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
1
Aliza bt Abdul Latif
Identification of Domains, Process and Activities in
Governance for Flood Management System in Malaysia
2
Ammuthavali A/P
Ramasamy
Interactive Data Visualisation of Customers Likely to
Default Bill Payment for TNB Distribution
3
Azhana Ahmad, Dr.
Modeling an Agent-Based Learning Management System
(LMS) for COIT
Azhana@uniten.edu.my
4
Azlan Bin Yusof
Delivering Learning Content through IOS Tablet Device
AzlanY@uniten.edu.my
5
Badariah bt Solemon, Dr.
Exploring the Use of Public Volunteered Geographical
Information (VGI) Providers for GIS Application
Badariah@uniten.edu.my
6
Hasniza bt Yahya
An Empirical Study on TNB Readiness in Facing Big Data
Challenges
YHasniza@uniten.edu.my
102
Aliza@uniten.edu.my
Ammutha@uniten.edu.my
RESEARCH FUNDS: INTERNAL FUNDS 2013
NO.
PROJECT LEADER
PROJECT’S TITLE
E-MAIL ADDRESS
7
Hazleen bt Aris
The Development of Metrics for Component Models
Comparison
Hazleen@uniten.edu.my
8
Hidayah bt Sulaiman, Dr.
Determining Learning Styles Preferences of
Computer Science and Information Technology (Csit)
Undergraduates
Hidayah@uniten.edu.my
9
Hidayah bt Sulaiman, Dr.
Usability Evaluation: Applying the Heuristic Evaluation
Methods and Techniques to Evaluate the Usability of The
Confirm-A Web Educational Tool
Hidayah@uniten.edu.my
10
Izyana bt Ariffin
The Potential of Using Volunteered Geographical
Information (VGI) in GIS Application for Electric Utility
Asset Tracking
Izyana@uniten.edu.my
11
Marini bt Othman, Dr.
Leveraging Social Media to Enhance CRM
Marini@uniten.edu.my
12
Mohd Zaliman M. Yusof
Modelling Relaxation Theraphy Framework for Remedial
of Work Stress through Virtual Reality and Immersive
Approach
Zaliman@uniten.edu.my
13
Muhammad Sufyian Bin
Mohd Azmi
Students Discipline Identification Using School Electronic
Report Card System
Sufyian@uniten.edu.my
14
Nor’ashikin bt Ali
Knowledge Management System Success Model for
Malaysian Academicians: A Partial Least Square Approach
Shikin@uniten.edu.my
15
Nur Shakirah bt Md Salleh
Mobile Web on Education
16
Raja Feninferina Binti Raja
Azman, Y.M.
Effectiveness of Homework Submission Via Android
Mobile Application
Ferina@uniten.edu.my
17
Ridha Bin Omar, En.
Evaluating “Opportunistic-Control” Approach of User
Interface Design in a Mixed Reality Environment for
Computer Assisted Training Application
Ridha@uniten.edu.my
18
Suhaimi Bin Ab. Rahman
A Rule-Based Approach for Automatic Identification Partof-Speech (Pos) Labels in Malay Sentence
Smie@uniten.edu.my
19
Zaihisma bt Che Cob
A Postgraduate Research and Supervision Tool Powered
by Semantic Technology
Zaihisma@uniten.edu.my
20
Zainuddin Bin Hassan,
Assoc. Prof. Dr.
A Formulation Of a Sustainability and Buildability
Assessments Framework Using Ai System for Construction
Project.
Zainuddin@uniten.edu.my
Shakirah@uniten.edu.my
103
List of
Publications
LIST of PUBLICATIONS 2013
Publications
Jounals
1.
A. Ahmad, M.Y.A. Rahman, H. Harun, M.S. Su’ait,
M.A. Yarmo. “Preparation and Characterization of 49%
Poly (Methyl Methacrylate) Grafted Natural Rubber
(MG49)–Stannum (IV) Oxide (SnO2)–Lithium Salt Based
Composite Polymer Electrolyte.” International Journal Of
Electrochemical Science, vol. 7, pp. 8309-8325, Sep. 2012.
2.
A. Ahmed, M. M. Fayyadh, S. Naganathan & K. Nasharuddin.
“Reinforced Concrete Beams With Web Openings: A State
Of The Art Review.” Materials And Design-Elsevier, vol. 40,
pp. 90–102, Mar. 2012.
3.
A. Ahmed, M.M. Fayyadh, S. Naganathan and
K. Nasharuddin. “Reinforced Concrete Beams With Web
Openings: A State Of The Art Review.” Materials And
Design-Elsevier, vol. 40, pp. 90–102, Mar. 2012.
4.
A. Aziz Mohamed, Hafizal Yazid, Sahrim Ahmad, Jaafar
Abdullah, M. Dahlan, Rozaidi Rasid, Megat Harun M. A.,
Mahathir Mohamad, N. Hamzah Harun. “Experimental
Optimization In Polymer Blend Composite Preparation
Based On Mix Level Of Taguchi Robust Design.” Journal
Of Nuclear And Related Technologies, volume 9, (1), Jun.
2012.
5.
6.
A. E. Atabani, A. S. Silitonga, H. C. Ong, T. M. I. Mahlia, H. H.
Masjuki, Irfan Anjum Badruddin & H. Fayaz. “Non-Edible
Vegetable Oils: A Critical Evaluation Of Oil Extraction, Fatty
Acid Compositions, Biodiesel Production, Characteristics,
Engine Performance And Emissions Production.” Renewable
And Sustainable Energy Reviews, vol. 18, pp. 211–24, Dec.
2012.
A. M. Mohsen, M. Z. Yusoff, A. Al-Falahi & N. H. Shuaib.
“The Effects Of Area Contraction On Shock Wave Strength
And Peak Pressure In Shock Tube.” Journal Of Automotive
& Mechanical Engineering, vol. 5, pp. 587-596, Jul. 2012.
7.
A. Manap, A. Nakano & K. Ogawa. “The Protectiveness Of
Thermally Grown Oxides On Cold Sprayed Conicraly Bond
Coat In Thermal Barrier Coating.” Journal Of Thermal Spray
Technology, June 2012, doi: 10.1007/s11666-012-9749-y
8.
A. Manap, A. Nakano & K. Ogawa. “The Protectiveness Of
Thermally Grown Oxides On Cold Sprayed Conicraly Bond
Coat In Thermal Barrier Coating.” Journal Of Thermal Spray
Technology, Jun. 2012, doi: 10.1007/s11666-012-9749-y
9.
A. Marwan, Nagi Farrukh, K. S. M. Sahari & S. Hanim.
“Real-Time On Line Tuning Of Fuzzy Controller For Two
Link Rigid-Flexible Robot Manipulators.” Transactions Of
The Institute Of Measurement And Control, Dec. 2012, doi:
10.1177/0142331212468373
10. A. Marwan, Nagi Farrukh, K. S. M. Sahari, S. Hanim. “RealTime On Line Tuning Of Fuzzy Controller For Two Link
Rigid-Flexible Robot Manipulators.” Transactions Of The
Institute Of Measurement And Control, Dec. 2012, doi:
10.1177/0142331212468373
11. A. N. M. Karim, Nor A. B. Khalid, Raja N. H. R. Ismail, M.
Haque & Shahida. Begum. “Securing Superior Properties Of
Composite (Pp+ Wf) Through Central Composite Design.”
Advanced Materials Research, vol. 535-537, pp. 186-189,
July 2012.
12. A. Sashirekha, J. Pasupuleti, N.H. Moin & C.S. Tan.
“Automatic Power Factor Correction Using A Modified
Statcom As A Continuously Controlled Capacitive Static
Var Compensator.” International Review On Modelling And
Simulations, vol. 5, (4), pp. 1422-1428, Aug. 2012.
13. A.A. Umar, M. Y. A. Rahman, R. Taslim, M. M. Salleh, M.
Oyama. “Effect Of The Thickness Of Quasi One-Dimensional
Zinc Oxide Nanorods Synthesized Via Multiple Growth
Process Under Ammonia Assisted Hydrolysis Technique
For Dye-Sensitized Solar Cell.” International Journal Of
14. A.A. Umar, M. Y. A. Rahman, R. Taslim, M. M. Salleh. “DyeSensitized Solar Cell Utilizing Quasi One-Dimensional of
Highly Compact Vertical Array ZnO Nanorod.” International
Journal Of Electrochemical Science, vol. 7, pp. 7253-7260,
Aug. 2012.
15. A.A. Umar, Mohd. Yusri Abd. Rahman, S. K. Md Saad, M.
M. Salleh & M. Oyama. “Preparation Of Grass-Like Tio2
Nanostructure Thin Films: Effect Of Growth Temperature.”
Applied Surface Science, vol. 270, pp. 109-114, Mar. 2013.
16. A.E. Atabani, A.S. Silitonga, H.C. Ong, T. M. I. Mahlia, H.H.
Masjuki, Irfan Anjum Badruddin, H. Fayaz. “Non-Edible
Vegetable Oils: A Critical Evaluation Of Oil Extraction, Fatty
Acid Compositions, Biodiesel Production, Characteristics,
Engine Performance And Emissions Production.”
Renewable And Sustainable Energy Reviews, vol.18, pp.
211–245, Dec. 2012.
17. Abd. Halim Shamsuddin. “Development Of Renewable
Energy In Malaysia Strategic Initiatives For Carbon
Reduction In The Power Generation Sector.” Procedia
Engineering, vol. 49, pp. 384 – 391, Nov. 2012.
18. Abdulkareem Mokif Obais & Jagadeesh Pasupuleti.
“Design Of A Continuously Controlled Inductive Static
Var Compensator Using A Single Phase Statcom With
Adjustable Capacitor Voltage And New Control Scheme.”
Science Series Data Report, vol. 4, no.7, pp. 94-102, July
2012.
19. Abdulkareem Mokif Obais & Jagadeesh Pasupuleti. “Design
Of An Almost Continuously Controlled Three-Phase Static
Var Compensator For Power Factor Correction Purposes.”
Scientific Research And Essays (Sre), vol. 7, no. 2, pp. 219230, Jan 2012.
20. Abreeza Manap, K. Ogawa and Tomonaga Okabe. “Numerical
Analysis Of Interfacial Bonding Of Al-Si Particle And
Mild Steel Substrate By Cold Spray Technique Using The
Sph Method.” Journal Of Solid Mechanics And Materials
Engineering, vol., (3), pp. 241-250, Mar. 2013. Available:
http://dx.doi.org/10.1299/jmmp.6.241
21. Abu Bakar Hasan, S. K. Tiong, J. S. P. Koh, Emillino Tasrip &
Muhammad Sufyian Mohd Azmi. “Fine Tuning on Support
Vector Regression Parameters for Personalized English
Word-Error Correction Algorithm.” Australian Journal
Of Basic And Applied Sciences, vol. 6, (6), pp. 15-20, Oct.
2012.
22. Aidy Ali, M. Bayat, B. B. Sahari, M. Saleem & O. S. Zaroog.
“The effect of ceramic in combinations of two sigmoid
functionally graded rotating disks with variable thickness.”
105
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
106
Scientific Research And Essays, vol. 7, pp. 2174-2188, July
2012.
Akrajas Ali Umar, Mohd Yusri Abd Rahman, Siti Khatijah
Md. Saad & Muhamad Mat Salleh. “Effect of NH3
Concentration on the Performance of Nitrogen doped
TiO2 Photoelectrochemical Cell.” International Journal
Of Electrochemical Science, vol. 7, pp. 7855-7865, Sep.
2012.
Al Al-Falahi Amir, Yusoff, M. Z. & Diyar I. Ahmed. “An
Experimental Evaluation Of Transient Flows In
Supersonic Gun Tunnel.” International Journal Of
Automotive & Mechanical Engineering, vol. 6, pp.
702-713.
Al-Falahi Amir, M. Z. Yusoff, Talal Yusaf & Diyar I. Ahmed.
“Numerical Investigation Of Flow Instability In Shock
Tube Due To Shock Wave-Contact Surface Interactions.”
International Journal Of Numerical Methods For Heat &
Fluid Flow, vol. 22, (3), pp.377 – 398, Jun. 2012.
Aliza Aini Md Ralib, Anis Nurashikin Nordin, Hanim Salleh
& Raihan Othman. “Fabrication Of Aluminium Doped Zinc
Oxide Piezoelectric Thin Film On A Silicon Substrate For
Piezoelectric MEMS Energy Harvesters.” Microsystem
Technologies, Jul. 2012.
Aliza Aini Md Ralib, Anis Nurashikin Nordin, Hanim Salleh
& Raihan Othman. “Fabrication Of Aluminium Doped Zinc
Oxide Piezoelectric Thin Film On A Silicon Substrate For
Piezoelectric MEMS Energy Harvesters.” Microsystem
Technologies, Jul. 2012.
Arabi N. S. AL Qadi, Kamal Nasharuddin Mustapha,
Sivakumar Naganathan & Qahir N. S. AL-Kadi. “Effect Of
Polypropylene Fibers On Thermo Gravimetric Properties
Of Self-Compacting Concrete At Elevated Temperatures.”
Fire And Materials. [Online] Available: wileyonlinelibrary.
com [Jan. 2012].
Arabi N. S. AL Qadi, Kamal Nasharuddin Mustapha,
Sivakumar Naganathan & Qahir N. S. AL-Kadi. “Effect Of
Polypropylene Fibers On Thermo Gravimetric Properties
Of Self-Compacting Concrete At Elevated Temperatures.”
Fire And Materials, Jan, 2012, doi: 10.1002/fam.2123
Arabi N. S. Alqadi, Kamal Nasharuddin Mustapha, Sivakumar
Naganathan & Qahir N. S. Al-Kadi. “Uses Of Central
Composite Design And Surface Response To Evaluate The
Influence Of Constituent Materials On Fresh And Hardened
Properties Of Self-Compacting Concrete.” KSCE Journal
Of Civil Engineering, vol. 16, pp. 407-416, Mar. 2012.
Arabi N. S. Alqadi, Kamal Nasharuddin Mustapha, Sivakumar
Naganathan & Qahir N. S. Al-Kadi. “Uses Of Central
Composite Design And Surface Response To Evaluate The
Influence Of Constituent Materials On Fresh And Hardened
Properties Of Self-Compacting Concrete.” KSCE Journal
Of Civil Engineering, vol. 16, (3), pp. 407-416, Mar. 2012.
Arabi N.S. Alqadi, Kamal Nasharuddin Mustapha, Sivakumar
Naganathan & Qahir N.S. Al-Kadi. “Development Of SelfCompacting Concrete Using Contrast Constant Factorial
Design.” Journal Of King Saud University: Engineering
Sciences, Jun. 2012.
Ayad Atiyah Abdulkafi, S. K. Tiong, J. Koh, D. Chieng &
A. Ting. “Energy Efficiency Of Heterogeneous Network:
A Review,” Journal Of Applied Science, Jul. 2012, doi:
10.3923/jas.2012
Azlan Iqbal, H. van der Heijden, M. Guid & Ali Makhmali.
“Evaluating The Aesthetics Of Endgame Studies: A
Computational Model Of Human Aesthetic Perception.”
IEEE Transactions On Computational Intelligence And AI
In Games: Special Issue On Computational Aesthetics In
Games, vol. 4, (3), pp. 178-191, Sep. 2012.
35. Azmi Ahmad. “Notch Root Strain Measurement Of
We43-T6 Magnesium Alloy Using Electronic Speckle
Pattern Interferometry.” Materials And Design, vol. 51,
pp. 206-211, Apr. 2013.
36. B. K. Yap & Agileswari Ramasamy, C. H. Tan & Noor Azrina
Talik. “Comparison Study on Shear Strength and IMC for
SAC and Polymer Core Solder Balls.” Advance Science
Letters, June 2012.
37. B. K. Yap, C. H. Tan, Ramasamy Agileswari & C. Lo.
“Comparison Study On Reliability Performance For Polymer
Core Solder Balls Under Multiple Reflow And Hts Stress
Tests.” Microelectronics Reliability, vol. 53, (1), pp. 164173, Aug. 2012.
38. B. K. Yap, Noor Azrina Talik, C. S. Foong, Zaliman Sauli, C. Y.
Tan & Vithyacharan Retnasamy. “Cleaning Organic Residue
in High-Pb Flip Chip Ball Grid Array Interconnection.”
Australian Journal of Basic and Applied Sciences, vol. 6,
(13), pp. 327-333, Dec. 2012.
39. B. Kasi & C. K. Chakrabarty. “Ultra-Wideband Antenna Array
Design For Target Detection.” Progress In Electromagnetic
Research C, vol. 25, pg 67-79, Feb. 2012.
40. B. Rismanchi, R. Saidur, H.H. Masjuki & T. M. I. Mahlia.
“Thermodynamic Evaluation Of Utilizing Different Ice
Thermal Energy Storage Systems For Cooling Application
In Office Buildings In Malaysia.” Energy And Buildings, vol.
53, pp. 117-12426, Dec. 2012.
41. B. Rismanchi, R. Saidur, H.H. Masjuki & T.M.I. Mahlia.
“Thermodynamic Evaluation Of Utilizing Different Ice
Thermal Energy Storage Systems For Cooling Application
In Office Buildings In Malaysia.” Energy And Buildings, vol.
53, pp. 117-126, Dec. 2012.
42. Balasem Salem, S. K. Tiong, S. P. Koh & D. F.W. Yap.
“Performance And Comparison Between MVDR And LCMV
Beamforming In Smart Antenna.” Science Series Data
Report, vol 4, (7), Sep. 2012.
43. Balasem. S.S, S.K.Tiong & S. P. Koh. “Beamforming
Algorithms Technique by Using MVDR and LCMV.” World
Applied Programming, vol. 2, (5), pp. 315-324, May 2012,.
44. Bashar S. Mohammed, Khandaker M. Anwar Hossain, J. E. S.
Ting, G. Wong & M. Abdullahi. “Properties of crumb rubber
hollow concrete block.” Journal of Cleaner Production, vol.
23, pp. 57-67, Jan. 2012.
45 Bashar S. Mohammed, Khandaker M. Anwar Hossain, Jackson
Ting Eng Swee, Grace Wong, M. Abdullahi. “Properties of
crumb rubber hollow concrete block.” Journal of Cleaner
Production, vol. 23, pp. 57-67, Jan. 2012.
46 Bashar S. Mohammed, L. W. Ean & M. A. Malek. “One way
RC wall panels with openings strengthened with CFRP.”
Construction And Building Materials, vol. 40, pp. 575-583,
Nov. 2012.
47 Bashar S. Mohammed, L. W. Ean & M. A. Malek. “One way
RC wall panels with openings strengthened with CFRP.”
Construction And Building Materials, vol. 40 pp. 575-583,
Nov. 2012.
48 C. F. Chau & T.Melvin. “Design And Fabrication Of A
Quasi-Ordered Nanoporous Silicon Membrane Suitable
For Thermally Induced Drug Release.” Journal Of
Micromechanics And Microengineering, vol. 22, (8), pp.
085028, July 2012.
49 C. H. Goh, Chandan Kumar Chakrabarty, S. K. Tiong & K.
H. Oon. “Rapid And Simple Design Approach Of Microstrip
Butler Matrix Beamforming Network For Wireless System.”
Ieice Electronics Express (Elex), vol. 9, no. 5, pp. 346-351,
Mar. 2012.
50 C. H. Goh, Chandan Kumar Chakrabarty, S. K. Tiong and K.
H. Oon. “Rapid And Simple Design Approach Of Microstrip
Butler Matrix Beamforming Network For Wireless System.”
Ieice Electronics Express (Elex), vol. 9, (5), pp. 346-351, Mar.
2012.
62 F. Tarlochan & S. Ramesh. “Sandwich Structures With
Nested Inserts For Energy Absorption Applications.”
Composite Structures, vol. 94, pp. 904-916, Feb. 2012.
63 F. Tarlochan & S. Ramesh. “Sandwich Structures With
Nested Inserts For Energy Absorption Applications.”
Composite Structures, vol. 94, (3), pp. 904-916, Feb. 2012.
64 F. Tarlochan, S. Ramesh & S. Harpreet. “Advanced Composite
Sandwich Structure Design For Energy Absorption
Applications: Blast Protection And Crashworthiness.”
Composites: Part B, vol. 43, pp. 2198–2208, Mar. 2012.
51 C. H. Yew, Khairul Salleh Mohamed Sahari & C. Y. Gan.
“Development Of 3D Elastic Deformable Object Model
For Robot Manipulation Purposes.” Applied Mechanics
And Materials, vol. 157-158 pp. 1167-1172, Feb. 2012.
65 F. Tarlochan, S. Ramesh & S. Harpreet. “Advanced Composite
Sandwich Structure Design For Energy Absorption
Applications: Blast Protection And Crashworthiness.”
Composites: Part B, vol. 43, pp. 2198–2208, Mar. 2012.
52 D. F. W. Yap, S. K. Tiong, J. Koh, D. P. Andito, K. C. Lim &
W. K. Yeo. “Link Performance Enhancement For Image
Transmission With FEC In Wireless Sensor Networks.”
Journal Of Applied Sciences, Jul. 2012, doi: 10.3923/
jas.2012
66 Farah Hani Nordi, Farrukh Hafiz Nagi & Aidil Azwin Zainul
Abidin. “Comparison Study Of Computational Parameter
Values Between Lrn And Narx In Identifying Nonlinear
Systems.” Turkish Journal Of Electrical Engineering &
Computer Sciences, vol. 21, pp. 1151-1165, Jun. 2013.
53 D. T. H. Neoh, Mohd Zafri Baharuddin, Syed Sulaiman
Kaja Mohideen, Khairul Salleh Mohamed Sahari & Adzly
Anuar. “Modular Motor Driver With Torque Control For
Gripping Mechanism.” Procedia Engineering, vol.41, pp.
1476–1482, Aug. 2012.
67 Farrukh Nagi, Syed Khaleel Ahmed, Abdul Talip Zulkarnain
& Jawad Nagi. “Fuzzy Time Optimal Controller (FTOC)
For Second Order Onolinear Systems.” ISA Transactions
- Elsevier, vol. 50, pp. 364-375, July 2012.
54 Dao Viet Nga, Ong Hang See, Do Nguyet Quang, Y. X. Chee,
L. L. Chee. “Visualization Techniques In Smart Grid.” Smart
Grid And Renewable Energy, vol. 3, (3), Aug. 2012.
55 Diyar I. Ahmed, Yusoff M. Z., Al-Falahi Amir & S. Kasolang.
“High Speed Flow Characteristics in Gun Tunnel.” Procedia
Engineering, vol. 41, pp. 1787-1793, Oct. 2012.
56 E. M. Fahmi, A. Ahmad, N. N. M. Nazeri, H. Hamzah, H. Razali
& M. Y. A. Rahman. “Effect Of Libf4 Salt Concentration
On The Properties Of Poly(Ethylene Oxide)-Based
Electrochemical Science, vol. 7. pp. 5798-5804, Jul. 2012.
57 E. Mat Tokit, H. A. Mohammed & M. Z. Yusoff. “Thermal
performance of optimized interrupted microchannel
heat sink (IMCHS) using nanofluids.” International
Communications In Heat And Mass Transfer, vol. 39, (10),
pp. 1595-1604, Dec. 2012.
58 E. Mat Tokit, H.A. Mohammed & M.Z. Yusoff. “Thermal
performance of optimized interrupted microchannel
heat sink (IMCHS) using nanofluids.” International
Communications In Heat And Mass Transfer, vol. 39, (10),
pp. 1595-1604, Dec. 2012.
59 F. C. Chien & T. Melvin. “Design And Fabrication Of A
Quasi-Ordered Nanoporous Silicon Membrane Suitable
For Thermally Induced Drug Release.” Journal Of
Micromechanics And Microengineering, vol. 22, (8), pp.
085-028, Jul. 2012.
60 F. Salehuddin, I. Ahmad, F. A. Hamid & A. Zaharim. “Impact
of Different Dose and Angle in HALO Structure for 45nm
NMOS Device.” Advanced Materials Research, vol. 383-390,
pp. 6827-6833, June 2012.
61 F. Salehuddin, I. Ahmad, F. A. Hamid, A. Zaharim, H. A.
Elgomati, B. Y. Majlis & P. R. Apte. “Influence of HALO
and Source/Drain Implantation Variations on Threshold
Voltage in 45nm CMOS Technology.” International Journal
Of Electronics, Computer And Communication Technologies,
vol. 2, (3), pp. 27-33, Sep. 2012.
68 Farrukh Nagi, Syed Khaleel Ahmed, Abdul Talip Zulkarnain
& Jawad Nagi. “Fuzzy Time Optimal Controller (FTOC)
For Second Order Onolinear Systems.” ISA Transactions
- Elsevier, vol. 50, pp. 364-375, Jul. 2012.
69 Fathoni Usman, Rohayu Che Omar & Zakaria Che Muda.
“Environmental Zoning For Service Life Prediction Of
Building Components In Malaysia.” Iop Conf. Series: Earth
And Environmental Science 16 (2013), doi:10.1088/17551315/16/1/012087
70 Fathoni Usman, Zakaria Che Muda & Rohayu Che Omar.
“Development Of Corrosion Risk Map For Peninsular
Malaysia Using Climatic And Air Pollution Data.” Iop Conf.
Series: Earth And Environmental Science 16 (2013), doi:
doi:10.1088/1755-1315/16/1/012088
71 Fathoni Usman, Zakaria Che Muda & Rohayu Che Omar.
“Value Engineering Awareness Study For Sustainable
Construction In Malaysia.” Iop Conf. Series: Earth And
Environmental Science 16 (2013), doi:10.1088/17551315/16/1/012089
72 L. K. Gan, C. Y. Kong, Syed Khaleel Ahmed & Fazrena Azlee
Hamid. “Behavioral Simulation of Delta-Sigma Fractional-N
PLL for WiMAX Applications.” International Journal Of
Emerging Technology And Advanced Engineering, vol. 2,
(8), Aug. 2012.
73 H. A. Mohammed, A. A. Al-Aswadi, M. Z. Yusoff & R.
Saidur. “Buoyancy-Assisted Mixed Convective Flow Over
Backward-Facing Step In A Vertical Duct Using Nanofluids.”
Thermophysics And Aeromechanics, vol. 19, (1), pp. 33-52,
doi: 10.1134/S0869864312010040
74 H. E. Ahmed, H. A. Mohammed & M. Z. Yusoff. “An overview
on heat transfer augmentation using vortex generators and
nanofluids: Approaches and applications.” Renewable And
Sustainable Energy Reviews, vol. 16, (8), pp. 5951-5993,
Oct. 2012.
75 H. E. Ahmed, H. A. Mohammed & M. Z. Yusoff. “Heat
transfer enhancement of laminar nanofluids flow in a
triangular duct using vortex generator.” Superlattices And
Microstructures, vol. 52, (3), pp. 398-415, Sep. 2012.
107
76 H. J. Abed, N. M. Din, M. H. Al-Mansoori, H. A. Fadhil &
F. Abdullah. “Recent Four-Wave Mixing Suppression
Methods.” Optik - International Journal For Light And
Electron Optics, Oct. 2012.
77 H. J. Abed, Norashidah Md. Din, Mohammed Hayder AlMansoori, Fairuz Abdullah, H. A. Fadhil, Mezher Hamed &
Noora Salim Alwan. “Comparison Among Different Type Of
Advanced Modulation Formats Under Four Wave Mixing
Effects.” Ukrainian Journal Of Physics, vol. 58, (4), Apr.
2013.
78 H. J. Chen, S. S. Huang, C. W. Tang, M. A. Malek & L. W. Ean.
“Effect of Curing Environments on Strength, Porosity and
Chloride Ingress Resistance of Blast Furnace Slag Cement
Concretes: A Construction Site Study.” Construction And
Building Materials, vol. 35, pp. 1063-1070, Jul. 2012.
79 H. Misran, F.A. M. Zini, M. A. Salim & S. Ramesh. “Facile
Processing Of Gamma Alumina For Potential Energy
Storage.” Advanced Materials Research, Apr. 2012.
80 H. Y. Katman, M. R. Ibrahim, M. Y. Matori, S. Norhisham,
N. Ismail & R. Che Omar. “Tensile Strength Of Reclaimed
Asphalt Pavement.” International Journal Of Civil &
Environmental Engineering, vol. 12, (3), pp. 14-19, Jun.
2012.
81 Hadi Nur, G. L. Kee, Halimaton Hamdan, Teuku Meurah Indra
Mahlia, Jon Efendi & Hendrik Simon Cornelis Metselaar.
“Organosulfonic acid functionalized zeolite ZSM-5 as
temperature tolerant proton conducting material.”
International Journal Of Hydrogen Energy, vol. 37, pp.
12513–12521, Dec. 2012.
82 Hafizal Yazid, P. Laggner, Sahrim Ahmad, A. Aziz
Mohamed, H. M. Dahlan, M. Rawi M. Z., Megat Harun M.
A.. “Morphological Parameter Study Of Polymer By Using
Small Angle X-Ray Scattering Method.” Journal Of Nuclear
And Related Technologies, vol. 9, (1), pp. 33-36, Sep. 2012.
83 Hassan Farhan Rashag, S. P. Koh, Ahmed N. Abdalla, N.
M. L. Tan, K. H. Chong & S. K. Tiong. “DTC torque ripple
minimization based on PSO-PID controller.” Scientific
Research And Essays (Academic Journals), vol. 7, (15), pp.
1564-1572 , Apr. 2012.
M. L. Tan, K. H. Chong & S. K. Tiong. “Speed Control of
Induction Motor by DTC based SVM: A Genetic Algorithm
via Optimal Neuro Controller.” Archives De Sciences, vol.
65, (7), pp. 813-833, Jul. 2012.
M. L. Tan, K. H. Chong & S. K. Tiong. “DTC of Induction
Motor Based on Position of Stator flux and Neural Network
Controller.” Science Series Data Report, vol. 4, (7), pp. 32
- 42, Jul. 2012.
M. L. Tan, K. H. Chong & S. K. Tiong. “Speed Control of
Induction Motor by DTC based SVM: A Genetic Algorithm
via Optimal Neuro Controller.” Archives De Sciences, vol.
65, (7), pp. 813 - 833, Jul. 2012.
87 Hassan Farhan Rashag, S. P. Koh, Ahmed N. Abdalla, N. M. L.
Tan, K. H. Chong, S. K. Tiong & Aqeel S. Jaber. “Improved
Close Loop Stator Flux Estimation Of Direct Torque Control
Drive.” Elsevier Proceedia Engineering, Sciverse Science
Direct, vol. 38, pp. 572 -577, Jun 2012.
88 H. J. Chen, S. S. Huang, C. W. Tang, M. A. Malek & L. W. Ean.
“Effect of curing environments on strength, porosity and
108
chloride ingress resistance of blast furnace slag cement
concretes: A construction site study.” Construction And
Building Materials, vol. 35, pp. 1063-1070, Jul. 2012.
89 Ibrahiem Abdul Razak Al-Ani, Lariyah Mohd Sidek,
Mohamad Nor Mohamad Desa & Noor Ezlin Ahmad
Basri. “Knowledge-Based Expert System For Stormwater
Management In Malaysia.” Journal Of Environment Science
And Technology 2012, Jul. 2012.
90 Ibrahiem Abdul Razak Al-Hadu, Lariyah Mohd Sidek,
Mohamed Nor Mohamed Desa & Noor Ezlin Ahmad Basri.
“Development of MCESC software for selecting the best
stormwater erosion and sediment control measure in
Malaysian construction sites.” International Journal Of
Energy And Environment, vol. 3, (1), pp. 119-128, Jul. 2012.
91 Issa Ahmed Abed, S.P. Koh, Khairul Salleh Mohamed
Sahari, S.K. Tiong & D. F.W. Yap. “Comparison Between
Genetic And Electromagnetism-Like Algorithm For Solving
Inverse Kinematics.” World Applied Sciences Journal, vol.
20, (7), pp. 946-954, Dec. 2012.
91 J. Ahmad, M. M. Rahman, M.H.A. Zuhairi, S. Ramesh, M.A.
Hassan & J. Purbolaksono. “High Operating Steam Pressure
And Localized Overheating Of A Primary Superheater
Tube.” Engineering Failure Analysis, Sep. 2012. Available:
http://dx.doi.org/10.1016/j.engfailanal.2012.08.012
92 J. Ahmad, M. M. Rahman, M.H.A. Zuhairi, S. Ramesh, M.A.
Hassan & J. Purbolaksono. “High Operating Steam Pressure
And Localized Overheating Of A Primary Superheater
Tube.” Engineering Failure Analysis, Sep. 2012, doi: http://
dx.doi.org/10.1016/j.engfailanal.2012.08.012
93 J. G. Willis, L. Fisk, Normy Razak, A. Le Compte, G. M.
Shaw & J. G. Chase. “Insulin Glargine In The Intensive
Unit-A Clinical Trial.” Journal Of Biomedical Signal And
Processings, Sep. 2012.
94 J. J. T. Kueh & Tarlochan Faris. “Finite Element Analysis
On The Static And Fatigue Characteristics Of Composite
Multi-Leaf Spring.” Journal Of Zhejiang University-Science
A (Applied Physics & Engineering), vol.13, no.3, pp.159238, Mar. 2012.
95 Jagadeesh Pasupuleti. “Combined Heat And Power (Chp)
Economic Dispatch Solved Using Lagrangian Relaxation
With Surrogate Subgradient Multiplier Updates.”
International Journal Of Electrical Power And Energy
Systems, vol. 44, (1), pp. 421-430, Jan. 2013.
96 Jagadeesh Pasupuleti. “Demand Response Impact On
Market Operator’S Revenue And Load Profile Of A Grid
Connected With Wind Power Plants.” Journal Of Electrical
Engineering And Technology, vol. 8, (1), pp. 46-52, Jan.
2013.
97 Jagadeesh Pasupuleti. “Design Of A Three-Phase
Statcom-Based Inductive Static Var Compensator Using
Dc Capacitor Voltage Control Scheme.” Research Journal
Of Applied Sciences, Engineering And Technology, vol. 5,
(5), pp. 1674-1680, Feb. 2013.
98 Jeremiah Anthony Samy, Prajindra Sankar Krishnan &
Tiong Sieh Kiong. “Utilizing Clonalpropagation Algorithm
For Pattern Matching With Training Data Sets.” American
Journal Of Intelligent Systems, vol. 2, (3), pp. 26-34, Apr.
2012.
99 J. T. J. Kueh & Tarlochan Faris. “Finite Element Analysis
On The Static And Fatigue Characteristics Of Composite
Multi-Leaf Spring.” Journal Of Zhejiang University-Science
A (Applied Physics & Engineering), vol.13, (3), pp.159-238,
Mar. 2012.
Temperature.” Sains Malaysiana, vol. 41, (5), pp. 761-768,
Apr. 2012.
100 K. G. Mohammed, A. Q. Ramli & U. A. Ungku Amirulddin.
“Design Of Outer Rotor Single Phase Squirrel Cage
Induction Motor.” International Review On Modelling And
Simulation (Iremos), vol. 5, pp. 245-255, Feb. 2012.
114 M. A. Ahmed, M.Z. Yusoff & N. H. Shuaib. “Effects of
geometrical parameters on the flow and heat transfer
characteristics in trapezoidal-corrugated channel using
nanofluid.” International Communications In Heat And
Mass Transfer, Dec. 2012.
101 K. K. A. Devi, Norashidah Md. Din & C. K. Chakrabarty.
“Optimization of the Voltage Doubler Stages in an RF-DC
Convertor Module for Energy Harvesting.” Circuits And
Systems, vol. 3, (3), Jul. 2012.
102 K. S. Yap & H. J. Yap. “Daily Maximum Load Forecasting
Of Consecutive National Holidays Using Oselm-Based
Multi Agents System With Weighted Average Strategy.”
Neurocomputing, vol. 81, pp. 108-112, April 2012.
103 Kah Hoong, K, Lariyah, M.S., Mohamed Roseli, Z.A., Hidayah,
B., Salmia, B., Shuhairy, N. & Herdayati, K. “Green Roof
As An Option Of Green Technology For Urban Stormwater
Management Controls.” 5th Engineering Conference
(ENCON) 2012, 10-12 Jul. 2012, Kuching, Sarawak.
104 K. W. Ng, W. H. Lam & K. C. Ng. “2002-2012: 10 Years
Of Research Progress In Horizontal-Axis Marine Current
Turbines.” Energies, Feb. 2013. doi: 10.3390/en60x000x
105 Kannan M. Munisamy, Norshah Hafeez Shuaib, Mohd.
Zamri Yusoff & Savithry K. Thangaraju. “Heat Transfer
Enhancement On Ventilated Brake Disk With Blade
Inclination Angle Variation.” Int. Journal Of Automotive
Technology, Jan. 2013.
106 Kannan M. Munisamy, Mohd Zamri Yusoff & Savithry K.
Thangaraju. “Ventilated Brake Disk Air Streamlining Using
Curved Vane.” Applied Mechanics And Materials, vol. 225,
pp. 73-78, Nov. 2012.
107 Kannan M. Munisamy, Ramies Govindasamy & Savithry
K. Thangaraju. “Rotor-Stator Distance Effect Onto Axial
Fan Performance Improvement.” Applied Mechanics And
Materials, vol. 225, pp. 73-78, Nov. 2012.
108 Kavuri K. A. Devi, S. Sadasivam, Norashidah Md. Din,
C.K. Chakrabarthy & S. K. Rajib. “Design Of A Wideband
377Ohm E-Shaped Patch Antenna For Rf Energy
Harvesting.” Microwave and Optical Technology Letters,
vol. 54, pp. 569–573, Jan. 2012.
109 Kavuri K. A. Devi, S. Sadasivam, Norashidah Md. Din,
C.K. Chakrabarthy & S. K. Rajib . “Design Of A Wideband
377Ohm E-Shaped Patch Antenna For Rf Energy
Harvesting.” Microwave and Optical Technology Letters,
vol. 54, (3), pp. 569–573, Jan. 2012.
115 M. A. Ahmed, N. H. Shuaib & M. Z. Yusoff. “Numerical
investigations on the heat transfer enhancement in a
wavy channel using nanofluid.” International Journal Of
Heat And Mass Transfer, June 2012.
116 M. A. Ahmed, N. H. Shuaib & M. Z. Yusoff. “Numerical
investigations on the heat transfer enhancement in a
wavy channel using nanofluid.” International Journal Of
Heat And Mass Transfer, Jul. 2012.
117 M. Amiriyan, K. W. J. Chew, S. Ramesh, R. Tolouei, M.
A. Hassan, A. Hossain, I. Sopyan & S. Meenaloshini.
“Mechanical And Electrical Properties Of Y-Tzp/Zrb2
Composite.” Advanced Materials Research, vol. 576, pp.
228-231, Feb. 2012.
118 M. D. Salim, H. Salleh & D. S. M. Salim. “Simulation And
Experimental Investigation Of A Wide Band Pz Mems
Harvester At Low Frequencies.” Microsystem Technologies,
Jun. 2012, doi: 10.1007/s00542-012-1453-9
119 M. D. Salim, H. Salleh & D. S. M. Salim. “Simulation And
Experimental Investigation Of A Wide Band Pz Mems
Harvester At Low Frequencies.” Microsystem Technologies,
Jun. 2012, doi: 10.1007/s00542-012-1453-9
120 M. H. Ali, B. Mohamed, M. N. M. Ansari & B. A. Khidhir.
“Finite Element Modeling for Prediction the Effect of Nose
Radius on Cutting Forces for Titanium (Ti-6Al-4V) Alloy.”
Journal Of Engineering Science And Technology Review,
vol 5., (2), pp.26-29, Sep. 2012.
121 M. M. Rahman, L. K. Haur & H. Y. Rahman. “Building
Integrated Photovoltaic (BIPV) In Malaysia: An Economic
Feasibility Study.” Elixir Finance, vol. 45, pp. 7683-7688,
Apr. 2012.
122 M. M. Rahman, S. S. M. Noor & H. Y. Rahman. “Sintering
Schedule For Warm Formed Iron Powder Compacts.” Elixir
Mech. Engg., vol. 38, pp. 4273-4275, Mar. 2013.
123 M. M. Rahman, S. S. M. Nor & A. K. Ariffin. “Sintering Schedule
For Near-Net Shapping Of Mechanical Components Formed
Through Warm Compaction Route.” Jurnal Teknologi, vol.
59, pp. 213–216, Dec. 2012.
110 K. S. Yap & H. J. Yap. “Daily Maximum Load Forecasting
Of Consecutive National Holidays Using Oselm-Based
Multi Agents System With Weighted Average Strategy.”
Neurocomputing, vol. 81, pp. 108-112, Apr. 2012.
124 M. M. Rahman, S. S. M. Nor, H. Y. Rahman & I. Sopyan.
“Effects Of Forming Parameters And Sintering Schedules
To The Mechanical Properties And Microstructures Of Final
Components.” Materials And Design, vol. 33, pp. 153–157,
Jan. 2012.
111 Khairul Salleh Mohamed Sahari & Raad Z. Homod. “Energy
Savings By Smart Utilization Of Mechanical And Natural
Ventilation For Hybrid Residential Building Model In
Passive Climate.” Energy And Buildings. Jan. 2013. doi:
http://dx.doi.org/10.1016/j.enbuild.2012.10.034
125 M. M. Rahman, Y. M. Ling, G. W. Soon & G. A. Kuan. “Heat
Transfer Enhancement Through Inner Grooved Copper
Tubes With Different Tube Parameters.” International
Journal Of Energy And Environment, vol 3(1), pp. 49 - 60,
Jan. 2012.
112 Khairul Salleh Mohamed Sahari & Hiroaki Seki. “Edge
Tracing Of T-Shirt By Robot For Spreading Purpose.” Applied
Mechanics And Materials, vol. 157-158 pp. 1190-1194,
Feb. 2012.
126 M. Mansor & N. A. Rahim. “Phase Angle Analysis For PWMSwitched Autotransformer Voltage-Sag Compensator.” IET
Power Electronics, Vol. 11, (9), pg. 1882-1891, Dec. 2012.
113 L. S. Ewe, R. Ramli, K. P. Lim & R. Abd-Shukor. “Electrical
And Magneto-Transport Properties Of Magneto-Resistive
La0.7Ca0.28Sr0.02Mno3 Prepared At Different Sintering
127 M. Mansor & N. A. Rahim. “Phase Angle Analysis For PWMSwitched Autotransformer Voltage-Sag Compensator.” IET
Power Electronics, vl. 11, (9), pp. 1882-1891, Dec. 2012.
109
128 M. N. L. Tan, Takahiro Abe & Hirofumi Akagi. “Design And
Performance Of A Bidirectional Isolated Dc-Dc Converter
For A Battery Energy Storage System.” Ieee Transactions
On Power Electronics, vol. 27, no. 3, pp. 1237–1248, Mar.
2012.
140 Mahmoud A. Younis, Tamer Khatib, Mushtaq Najeeb &
A. Mohd Ariffin. “An Improved Maximum Power Point
Tracking Controller For Pv Systems Using Artificial Neural
Network.” Przeglad Elektrotechniczny (Electrical Review),
vol. 2012, pp. 116-121, Mar. 2012.
129 M. R. Anisur, M. H. Mahfuz, M. A. Kibria, R. Saidur, I. H. S. C.
Metselaar & T. M. I. Mahlia. “Curbing global warming with
phase change materials for energy storage.” Renewable
And Sustainable Energy Reviews , vol. 18, pp. 23–30, Dec.
2012.
141 Mahmoud A. Younis, Tamer Khatib, Mushtaq Najeeb &
A Mohd Ariffin. “An Improved Maximum Power Point
Tracking Controller For Pv Systems Using Artificial Neural
Network.” Przeglad Elektrotechniczny (Electrical Review),
vol. 2012, (3b), pp. 116-121, Mar. 2012.
130 M. Shekarchian, M. Moghavvemi, F. Motasemi, F. Zarifi &
T. M. I. Mahlia. “Energy and fuel consumption forecast by
retrofitting absorption cooling in Malaysia from 2012 to
2025.” Renewable And Sustainable Energy Reviews, vol.
16, pp. 6128–6141, Dec 2012.
142 Mahmoud Khalid Almsafir & Islam Faisal Bourini. “The
Global Drivers Of Awareness Toward Tqm Practices Within
Educational Field: Evidence From Malaysia.” Procedia
Social And Behavioral Sciences, Aug. 2012.
131 M. Shekarchian, M. Moghavvemi, F. Motasemi, F. Zarifi,
T.M.I. Mahlia. “Energy and fuel consumption forecast by
retrofitting absorption cooling in Malaysia from 2012 to
2025.” Renewable And Sustainable Energy Reviews, vol.
16, pp. 6128–6141, Dec. 2012.
132 M. Z. Hamzah, M. L. Ibrahim, Q. H. Chye, B. Ahmad, J. I.
Inayat-Hussain & J. Purbolaksono. “Evaluation On The
Hardness And Microstructures Of T91 Reheater Tube After
Post-Weld Heat Treatment.” Engineering Failure Analysis,
vol. 26, pp. 349-354, Dec. 2012.
133 M. A. Ahmed, M. Z. Yusoff & N. H. Shuaib. “Effects of
geometrical parameters on the flow and heat transfer
characteristics in trapezoidal-corrugated channel using
nanofluid.” International Communications In Heat And
Mass Transfer, Dec. 2012.
134 M. A. Khoiry, N. M. Tawil, N. Hamzah, A. I. Che Ani & S.
Sood. “Critical Factors Affecting Double Storey Terrace
Houses Prices In Bandar Baru Bangi.” Procedia - Social
and Behavioral Sciences, vol. 60, pp. 562-566, Oct. 2012.
135 M. M. Rahman, S. S. M. Nor, H. Y. Rahman, I. Sopyan. “Effects
Of Forming Parameters And Sintering Schedules To The
Mechanical Properties And Microstructures Of Final
Components.” Materials And Design, vol. 33, pp. 153–157,
Jan. 2012.
136 M. R. Anisur, M. H. Mahfuz, M. A. Kibria, R. Saidur, I. H. S. C.
Metselaar, T. M. I. Mahlia. “Curbing global warming with
phase change materials for energy storage.” Renewable
And Sustainable Energy Reviews, vol. 18, pp. 23–30, Dec.
2012.
137 M. Y. A. Rahman, A. A. Umar, R. Taslim, M. M. Salleh. “Effect
Of Organic Dye, The Concentration And Dipping Time Of
The Organic Dye N719 On The Photovoltaic Performance
Of Dye-Sensitized Zno Solar Cell Prepared By AmmoniaAssisted Hydrolysis Technique.” Electrochimica Acta, vol.
88, pp. 639-643, Dec. 2012.
138 M. Z. Hamzah, M. L. Ibrahim, Q. H. Chye, B. Ahmad, J. I.
Inayat-Hussain & J. Purbolaksono. “Evaluation On The
Hardness And Microstructures Of T91 Reheater Tube After
Post-Weld Heat Treatment.” Engineering Failure Analysis,
vol. 26, pp. 349-354, Dec. 2012.
139 Mahdi Amiriyan, Meenaloshini Satgunam, Sivanesan
Sivakumar, R. Singh & Ranna Tolouei. “Sinterability And
Mechanical Properties Of Mno2-Doped Y-Tzp: The Effects
Of Holding Time Variations.” Applied Mechanics And
Materials, vol. 110-116, pp. 1284-1288, Feb. 2012.
110
143 Mahmoud Khalid Almsafir, Shaari Md Nor & Ahmed
Hamoud Al-Shibami. “Location Related Determinants Of
Forign Direct Investment In Yemen: Dunning’s Eclectic
Paradigm Perspective.” Australian Journal Of Basic And
Applied Science, vol. 5, (8), pp. 394-404, Aug. 2012.
144 Marayati Marsadek & Azah Mohamed. “Risk Based Security
Assessment Of Power System Using Generalized Regression
Neural Network With Feature Extraction.” Journal Of South
Central University Of Technology, vol. 20, (2), Feb. 2013.
145 Md Mujibur Rahman, Sany Shahriman Md Noor & Hendri
Yani Rahman. “The Effects Of Sintering Schedule To The
Final Properties Of Iron Powder Compacts Formed Through
Warm Compaction Route.” International Journal On
Advanced Science, Engineering And Information Technology,
vol. 2, (3), pp. 43–48, Feb. 2012.
146 Md Raziq Asyraf Md Zin, Khairul Salleh Mohamed Sahari,
Juniza Md Saad, Adzly Anuar & Abd Talip Zulkarnain.
“Development Of A Low Cost Small Sized In-Pipe Robot.”
Procedia Engineering, vol.41, pp. 1469–1475, Aug. 2012.
147 Md. A. Alam & M. Z. Jumaat. “Experimental Investigations
On U- And L-Shaped End Anchored Cfrp Laminate
Strengthened Reinforced Concrete Beams.” Arabian Journal
For Science And Engineering, vol. 37, (4), pp. 905-919, May
2012, doi: 10.1007/s13369-012-0213-6
148 Md. A. Alam & M. Z. Jumaat. “Experimental Investigations
On U- And L-Shaped End Anchored Cfrp Laminate
Strengthened Reinforced Concrete Beams.” Arabian Journal
For Science And Engineering, vol. 37, (4), pp. 905-919,
May 2012, DOI: 10.1007/s13369-012-0213-6
149 Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed & A.
A. Oshkour. “Investigation On Chip Formation During
Machining Using Finite Element Modelling.” Advanced
Materials Research Journal, vol. 505, pp. 31-36, Apr. 2012.
150 Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, and A. A.
Oshkour. “Prediction Of High Cutting Speed Parameters For
Ti-6Ai-4V By Using Finite Element Modelling.” International
Journal Of Modelling And Optimization, vol. 2, (1), pp. 3135, Feb. 2012.
150 Mohammed H. Ali, C. K. Chakrabarty, Mithaq H. Raheema.
“An Optimized Highly Efficient Rf Power Amplifier For Wlan
System Application.” Modern Applied Science, Vol. 6, (2),
Feb. 2012.
151 Mohd Zafri Baharuddin, Juniza Md Saad, Adzly Anuar, Iszmir
Nazmi Ismail, Nur Maisurah, Hassan Basri, Nur Shahida
Roslin, Syed Sulaiman Kaja Mohideen, Muhammad Fairuz
Abdul Jalal & Khairul Salleh Mohamed Sahari. “Robot for
Boiler Header Inspection ‘LS-01’.” Procedia Engineering,
vol. 41, pp. 1483–1489, Aug. 2012.
152 Mojgan Ahmadrezaei, Andanastuti Muchtar, Norhamidi
Muhamad, C. Y. Tan & Edi Heriyanto Majlan. “Electrochemical
And Microstructural Characteristics Of Nanoperovskite
Oxides Ba0.2Sr0.8Co0.8Fe0.2O3-δ (BSCF) For Solid Oxide
Fuel Cells.” Ceramics International, June 2012.
165 N. N. Mobarak, A. Ahmad, M.P. Abdullah, N. Ramli & Mohd.
Yusri Abd. Rahman. “Conductivity Enhancement Via
Chemical Modification Of Chitosan Based Green Polymer
Electrolyte.” Electrochimica Acta, vol. 92, pp. 161-167,
Feb. 2013.
153 Muhamad Mansor & Dalia H. Al-Maamoury. “Power Flow
Control For A Single-Phase Grid-Connected Pv System.”
International Journal Of Scientific & Technology Research
(Ijstr), vol. 2, (3), pp. 198-202, Mar. 2013.
166 N. Saifuddin & Sultanbayeva Dinara. “Immobilization Of
Saccharomyces Cerevisiae Onto Cross-Linked Chitosan
Coated With Magnetic Nanoparticles For Adsorption
Of Uranium (Vi) Ions.” Advances In Natural And Applied
Sciences, vol. 6, (2), pp. 249-267, Apr. 2012.
154 Muhammad Azmi Abdul Hamid, Maria Abu Bakar,
Azman Jalar, Roslinda Shamsudin & Ibrahim Ahmad.
“Effect Of Substrate Coating On The Morphology And
Optical Properties Of Zinc Oxide Thin Film.” Journal Of
Nanoelectronics And Optoelectronics, vol. 7, pp. 1–4, Mar.
2012.
155 Muhammad Azmi Abdul Hamid, Maria Abu Bakar, Azman
Jalar, Roslinda Shamsudin & Ibrahim Ahmad. “Morphology
and Optical Properties of Nickel Oxide Nanostructure
from Aqueous Solution.” Advanced Materials Research,
vol. 399-401, pp. 581-584, June 2012.
156 Muhammad Mansor & Nasrudin Abd. Rahim. “Phase Angle
Analysis For Three-Phase Pwm-Switched Autotransformer
Voltage-Sag Compensator.” Arabian Journal For Science
And Engineering, vol. 37, (7), pp. 1987-2001, Sep. 2012.
157 N. A. M. Radzi, N. M. Din, M. H. Al-Mansoori, I. S. Mustafa
& M. S. A. Majid. “Analysis Of Delay Performance On The
Intelligent Fuzzy Logic Dynamic Bandwidth Allocation
Algorithm.” Arabian Journal Of Science And Engineering,
Springer, Dec. 2012.
158 N. A. M. Radzi, N. M. Din, M. H. Al-Mansoori, I. S. Mustafa
& M. S. A. Majid. “Analysis Of Delay Performance On The
Intelligent Fuzzy Logic Dynamic Bandwidth Allocation
Algorithm.” Arabian Journal Of Science And Engineering,
Springer, Dec. 2012.
159 N. A. M. Radzi, N. M. Din, M. H. Al-Mansoori, S. K. Sadon,
M. S. A. Majid & M. Yaacob. “Supporting Global Priority
in Epon Differentiated Services Upstream Bandwidth
Allocation.” International Journal Of Electronics, Computer
& Communications Technologies, vol. 3, (1), pp. 21-25, Oct.
2012.
160 N. Ataollahi, A. Ahmad, H. Hamzah, M.Y.A. Rahman, N.S.
Mohamed. “Preparation And Characterization Of Pvdf-Hfp/
Mg49 Based Polymer Blend Electrolyte.” International
Aug. 2012.
161 N. M. Din, C. K. Chakrabarty, A. Bin Ismail, K. K. A.
Devi & W. Y. Chen. “Design Of RF Energy Harvesting
System For Energizing Low Power Devices.” Progress In
Electromagnetics Research, vol. 132, pp. 49, Sep. 2012.
162 N. M. L. Tan, Takahiro Abe & Hirofumi Akagi. “Design And
Performance Of A Bidirectional Isolated Dc-Dc Converter
For A Battery Energy Storage System.” Ieee Transactions
On Power Electronics, vol. 27, (3), pp. 1237–1248, Mar.
2012.
163 N. M. Nusi & M. Othman. “Rotated Explicit Group FDTD
Method for Solving Electromagnetic Wave Propagation.”
International Journal Of Applied Physics And Mathematics,
vol. 2, (6), pp 413-416, doi: 10.7763/IJAPM.2012.V2.148.
164 N. Md. Din, C. K. Chakrabarty, K. K. A. Devi & S. Sadasivam.
“Rectangular Stepped Patch Antenna At Gsm 900 For
Energy Scavenging.” Progress In Electromagnetics Research
C, vol. 29, pp. 17-28, June 2012.
167 N. Saifuddin, A. Z. Raziah & A. R. Junizah. “Carbon
Nanotubes: A Review On Structure And Their Interaction
With Proteins.” Journal Of Chemistry, [online], Sep. 2012.
Available: http://dx.doi.org/10.1155/2013/676815
168 N. A. Hamid & N.F. Shamsudin. “Effect of Nanosize MgO
Addition on the Texture and Mechanical Strength of Bi2212 Superconductor Compound.” Advanced Materials
Research, vol. 545, pp. 387-392, Sep. 2012.
169 N. N. Mobarak, N. Ramli, A. Ahmad & M. Y. A. Rahman.
“Chemical interaction and conductivity of carboxymethyl
κ-carrageenan based green polymer electrolyte.” Solid
State Ionics, vol. 224, pp. 51-57, Aug. 2012.
170 Naganathan S., Mustapha K. N. & Omar, H. “Use Of Recycled
Concrete Aggregate In Controlled Low-Strength Material
(Clsm).” Civil Engineering Dimension, vol. 14, no. 1, pp.
13-18, Mar 2012.
171 Naganathan Sivakumar, Abdul Razak Hashim & Abdul
Hamid Siti Nadzriah. “Effect of quarry dust addition on
the performance of controlled low-strength material
made from industrial waste incineration bottom ash.”
International Journal Of Minerals, Metallurgy And Materials,
vol. 19, no. 6, July 2012.
172 Naganathan Sivakumar, Abdul Razak Hashim & Abdul
Hamid Siti Nadzriah. “Effect of quarry dust addition on
the performance of controlled low-strength material
made from industrial waste incineration bottom ash.”
International Journal Of Minerals, Metallurgy And Materials,
vol. 19, (6), Jul. 2012.
173 Nainar S. M., Begum S., Hasan Z., Ansari M. N. M. & Anuar H.
“Influence Of Maleic Anhydride On Mechanical Properties
And Morphology Of Hydroxyapatite/Poly-(Lactic Acid)
Composites.” Regenerative Research Official Journal Of
Tesma, vol. 1, (2), pp. 32-38, Nov. 2012.
174 Nasri A. Hamid, Azlan Abdul Rahman & Mohd Shahrul Nizam
Asbullah. “Enhancement Of Magnetic Flux Distribution In
A Dc Superconducting Electric Motor.” Iop Conf. Series:
Earth And Environmental Science, doi: 10.1088/17551315/16/1/012051
175 Nasri A. Hamid, L. S. Ewe & K. M. Chin. “Enhancement
Of Magnetic Flux Distribution In A Dc Superconducting
Electric Motor.” Iop Conf. Series: Earth And Environmental
Science, doi: 10.1088/1755-1315/16/1/012051
176 Nasri A. Hamid, Mohd. Zamri Yusoff & Mohd Syukri Yahya.
“Planning And Development Of Nuclear Engineering
Program At Universiti Tenaga Malaysia (UNITEN).” Procedia
Social And Behavioral Sciences, vol. 56, pp. 609-616, Oct.
2012.
177 Nasri A. Hamid, Yusof Abdullah & Mohd Shahrul
Nizam Asbullah. “Effects Of Electron Irradiation On
Superconducting Properties Of Bi2sr2cacu2o8/Mgo
Superconductor Composite.” Journal Of Nuclear And
Related Technologies, vol. 9, (2), pp. 1-6, Mar. 2013.
111
178 Nasri A. Hamid, Yusof Abdullah & Muhammad Akmal
Mansor. “Design Of Sample Carrier For Neutron Irradiation
Facility At Triga Mark Ii Nuclear Reactor.” Iop Conf. Series:
Earth And Environmental Science, doi: 10.1088/17551315/16/1/012139
179 K. C. Ng. “Lagrangian Simulation Of Steady And Unsteady
Laminar Mixing By Plate Impeller In A Cylindrical Vessel.”
Iop Conf. Series: Earth And Environmental Science, doi:
10.1021/ie400621b
180 Nor’ashikin Ali, D. Whiddett, A. Tretiakov & I. Hunter.
“The Use Of Information Technologies For Knowledge
Sharing By Secondary Healthcare Organizations In New
Zealand.” International Journal Of Medical Informatics,
Feb. 2012. Available: http://dx.doi.org/10.1016/j.
ijmedinf.2012.02.011
181 Nur Irmawati Om. “Influence Of Sinusoidal Flow On The
Thermal And Hydraulic Performance Of Microchannel Heat
Sink.” Iop Conf. Series: Earth And Environmental Science,
vol. 16.
182 Nur Maisurah Hassan Basri, Khairul Salleh Mohamed Sahari,
Syed Sulaiman Kaja Mohideen, Nur Shahida Roslin & Adzly
Anuar. “Development Of 3D Boiler Header Template Using
Webots.” Procedia Engineering, vol.41, pp. 1463–1468,
Aug. 2012.
183 Nur Maisurah Hassan Basri, Khairul Salleh Mohamed Sahari,
Syed Sulaiman Kaja Mohideen, Mohd Zafri Baharuddin &
Adzly Anuar. “RS-485 Interface for Boiler Header Inspection
Robot Prototype.” Procedia Engineering, vol. 41, 2012, pp.
1490–1496, Aug. 2012.
184 Nur Shahida Roslin, Adzly Anuar, Muhammad Fairuz
Abdul Jalal & Khairul Salleh Mohamed Sahari. A Review:
Hybrid Locomotion of In-pipe Inspection Robot.” Procedia
Engineering, vol. 41, pp. 1456–1462, Aug. 2012.
185 P. Gunnasegaran, N. H. Shuaib & M. F. Abdul Jalal. “The
Effect Of Geometrical Parameters On Heat Transfer
Characteristics Of Compact Heat Exchanger With Louvered
Fins.” International Scholarly Research Network ISRN
Thermodynamics, doi: doi:10.5402/2012/832708
186 P. Kumaran, N. M. Razali, N. Saifuddin, M. Z. Yusof, H.
Ibrahim, M. Nazrain & M. Khairul. “Technical Assessment
On The Potential Of Biodiesel As A Renewable Energy
From Langkawi Waste Cooking Oil.” Journal Of Energy &
Environment, vol. 3, pp. 19-25, Apr. 2012.
187 P. S. Menon, S. Kalthom Tasirin, Ibrahim Ahmad & S. Fazlili
Abdullah. “Optimization of Process Parameters for Si
Lateral PIN Photodiode.” World Applied Sciences Journal
20 (Mathematical Allpications In Engineering), pp. 98-103,
Oct. 2012.
188 Prem Gunnasegaran, Mohd Zulkifly Abdullah & N. H.
Shuaib. “Influende Of Nanofluid On Heat Transfer In A
Loop Heat Pipe,” International Communications In Heat
And Mass Transfer, May 2013.
189 R. Adnan, H. H. Masjuki & T. M. I. Mahlia. “Performance
And Emission Analysis Of Hydrogen Fueled Compression
Ignition Engine With Variable Water Injection Timing.”
Energy, vol.43, pp. 416-426, May 2012.
190 R. Adnan, H. H. Masjuki & T. M. I. Mahlia. “Performance
And Emission Analysis Of Hydrogen Fueled Compression
Ignition Engine With Variable Water Injection Timing.”
Energy, vol. 43, pp. 416-426, May 2012.
191 R. Saidura, S. Mekhilef, M. B. Ali, A. Safari & H. A. Mohammed.
“Applications of variable speed drive (VSD) in electrical
112
motors energy savings.” Renewable and Sustainable Energy
Reviews, vol. 16, pp. 543– 550, Jan. 2012.
192 Raad Z. Homod, Khairul Salleh Mohamed Sahari, Haider A.
F. Almuribb & Farrukh Hafiz Nagi. “RLF and TS fuzzy model
identification of indoor thermal comfort based on PMV/
PPD.” Building And Environment, vol. 49, pp. 141-153,
Mar. 2012.
193 Raad Z. Homoda, Khairul Salleh Mohamed Sahari, Haider
A.F. Almuribb & Farrukh Hafiz Nagi. “Gradient Auto-Tuned
Takagi–Sugeno Fuzzy Forward Control Of A Hvac System
Using Predicted Mean Vote Index.” Energy And Buildings,
vol. 49, pp. 254-267, June 2012.
175 Raad Z. Homoda, Khairul Salleh Mohamed Sahari, Haider
A.F. Almuribb & Farrukh Hafiz Nagi. “Gradient Auto-Tuned
Takagi–Sugeno Fuzzy Forward Control Of A Hvac System
Using Predicted Mean Vote Index.” Energy And Buildings,
vol. 49, pp. 254-267, Jun. 2012.
176 Ranna Tolouei, R. Singh, C. Y. Tan, Meenaloshini Satgunam
& Mahdi Amiriyan. “Manufacturing Of High Toughness
Hydroxyapatite Produced By Wet Chemical Method.”
Applied Mechanics And Materials, vol. 110-116, pp. 12891295, Feb. 2012.
177 Reem Sabah M., Mohamed Ansari & Mohannad Saleh
H. “A Study On Mechanical, Thermal and Morphological
Properties Of Natural Fibre/Epoxy Composite.” Journal
Of Purity, Utility Reaction And Environment, vol. 1, (5), pp.
237-266, Jul. 2012.
178 S. Begum, H. Misran & A. Aminuddin. “Developing of
Honeycomb Shaped Cordierite Ceramic from Indigenous
Raw Materials and its Characterization.” Advanced Materials
Research, vol. 264-265, pp. 597-601, July 2012.
179 S. D. Chen. “A new image quality measure for assessment
of histogram equalization-based contrast enhancement
techniques.” Elsevier Digital Signal Processing, Apr. 2012,
doi: http://dx.doi.org/10.1016/j.dsp.2012.04.002
180 S. K. Sadon, N. M. Din, M. H. Al-Mansoori, N. A. Radzi, I.
S. Mustafa, Mashkuri Yaacob & M. S. A. Majid. “Dynamic
Hierarchical Bandwidth Allocation with Russian Doll
Allocation Model in EPON.” Journal Of Computers And
Electrical Engineering, Elsevier, June 2012.
181 S. K. Tiong, Abu Bakar Hasan, J. S. P. Koh & D. F. W. Yap.
“Error Detection Of Personalized English Isolated-Word
Using Support Vector Machine (SVM).” Trends In Applied
Sciences Research, Jul. 2012, doi: 10.3923/tasr.2012
182 S. Kalthom Tasirin, P. Susthitha Menon, Ibrahim Ahmad
& S. Fazlili Abdullah. “Robust Optimization Of A Silicon
Lateral Pin Photodiode.”Australia Journal Of Basic & Applied
Sciences (AJBAS), vol 6, (8), pp. 275-281, Nov. 2012.
183 S. M. Shafie, T. M. I. Mahlia, H. H. Masjuki & A. Ahmad-Yazid.
“A review on electricity generation based on biomass
residue in Malaysia.” Renewable And Sustainable Energy
Reviews, vol. 16, pp. 5879–5889, Dec. 2012.
184 S. Mekhilef, A. Safari, W. E. S. Mustaffa, R. Saidurb, R.
Omar & M. A. A. Younis. “Solar energy in Malaysia:
Current state and prospects.” Renewable and Sustainable
Energy Reviews, vol. 16, pp. 386– 396, Jan. 2012.
185 S. Naganathan, N. Subramaniam & K. Nasharuddin
Mustapha. “Development Of Brick Using Thermal Power
Plant Bottom Ash And Fly Ash.” Asian Journal Of Civil
Engineering (Building And Housing), vol. 13, no. 1, pp.
275-287, June 2012.
186 S. Ramesh, C. Y. Tan, R. Tolouei, M. Amiriyan, J.
Purbolaksono, I. Sopyan & W. D. Teng. “Sintering Behavior
Of Hydroxyapatite Prepared From Different Routes.”
Materials & Design, vol. 34, pp. 148–154, Feb. 2012.
187 S. Ramesh, J. Purbolaksono, M. Hamdi, I. Sopyan, R. Tolouei,
M. Amiriyan, F. Tarlochan & W. D. Teng. “Low-Temperature
Degradation (Ltd) Behaviour Of Cuo-Doped Tetragonal
Zirco Nia Ceramic.” Ceramics – Silikáty, vol. 56, pp. 15-19,
May 2012.
188 S. Y. Kong, Alex M. Remennikov & Brian Uy. “The Response
Of Axially Restrained Non-Composite Steel–Concrete–
Steel Sandwich Panels Due To Large Impact Loading.”
Engineering Structures, vol. 49, pp. 806-818, Apr. 2013.
189 S. Y. Lam, N. H. Shuaib, H. Hasini & N. A. Shuaib.
“Computational Fluid Dynamics Invstigation On The Use Of
Heat Shield For Thermal Management In Car Underhood.”
International Journal Of Automotive And Mechanical
Engineering (IJAME), vol. 6, pp. 783-794, Dec. 2012.
190 S.K. Sadon, N. M. Din, M.H. Al-Mansoori, N.A. Radzi, I.S.
Mustafa, Mashkuri Bin Yaacob & M.S.A. Majid. “Dynamic
Hierarchical Bandwidth Allocation with Russian Doll
Allocation Model in EPON.” Journal Of Computers And
Electrical Engineering, Elsevier, Jun. 2012.
191 S.Kalthom Tasirin, P. Susthitha Menon, Ibrahim Ahmad &
S. Fazlili Abdullah. “High Responsivity Sige/Si Quantum
Dot Soi-Based Lateral Pin Photodiode.” American Journal
Of Applied Sciences, Nov. 2012.
192 S.M. Shafie, T.M.I. Mahlia, H.H. Masjuki & A. Ahmad-Yazid.
“A review on electricity generation based on biomass
residue in Malaysia.” Renewable And Sustainable Energy
Reviews, vol. 16, pp. 5879–5889, Dec. 2012.
193 Sadam Hade Hussein, Kamal Nasharuddin Mustapha,
Zakaria Che Muda & Salmia Beddu. “Modeling Of Ultimate
Load For Lightweight Palm Oil Clinker Reinforced Concrete
Beams With Web Openings Using Response Surface
Methodology.” International Journal of Civil Engineering
and Technology (IJCIET), Vol. 3, (1), Jan. 2012.
194 Saifuddin Nomanbhay, Refal Hussain, Md. Mujibur Rahman
& Kumaran Palanisamy. “Integration Of Biodiesel And
Bioethanol Processes: Convertion Of Low Cost Waste
Glycerol To Bioethanol.” Advances In Natural And Applied
Sciences, vol. 6, (3), pp. 144-157, Jul. 2012.
195 Salah F. A. Sharif & Z. Che Muda. “Investigation Of
Biokinetics Constants For Dairy Effluent In Hot Climate
Countries.” Journal Of Purity, Utility Reaction And
Environment, vol. 1, (8), pp. 381-395, Oct. 2012.
196 Samuel L. K. L., C. Y. Tan, Ramesh S., B. K. Yap, Tolouei R. &
Amiriyan M. “Effects Of Ramp Rates With Short Holding
Time On The Sinterability Of Hydroxyapatite.” Advanced
Materials Research, vol. 545, pp. 229-234, July 2012.
197 Shahida Begum & A. N. Mustafizul Karim. “Wall Thinning
And Creep Damage Analysis In Boiler Tube And
Optimization Of Operating Conditions.” Journal Of Me
Hatronics, vol. 1, pp. 1-6, Jun. 2013.
200 Sim Yue Ling & Lee Choon Yong. “Palm Biodiesel
Contaminated Sand-Steel Interface Testing with Direct
Simple Shear Apparatus.” International Journal Of Civil
And Structural Engineering, vol. 3, (1), pp. 205-216, Aug.
2012.
201 Siti Fazlili Abdullah, Saifuddin M. Nomanbhay, I. S. Ishak
& S. Radiman. “Structural And Tribology Properties Of
Wo3, Tio2 And Zno Composite Nanoparticles As Lubricant
Additives.” Journal Of Energy & Environment, vol. 4, (1),
pp. 26-30, Jan. 2013.
202 Sivakumar Naganathan & Hashim Abdul Razak. “Corrosivity
And Leaching Behavior Of Controlled Low-Strength
Material (Clsm) Made Using Bottom Ash And Quarry Dust.”
Journal Of Environmental Management-Elsevier, Jun. 2013.
203 Sivakumar Naganathan, Hashim Abdul Razak & Siti Nadzriah
Abdul Hamid. “Properties of controlled low-strength
material made using industrial waste incineration bottom
ash and quarry dust.” Materials And Design, vol. 33, pp.
56-63, July 2012.
204 Sivakumar Naganathan, Kamal Nasharuddin Mustapha
& Kalavagunta Sreedhar. “Design Equation For Cfrp
Strengthened Cold Formed Steel Channel Column
Sections.” International Journal Of Advanced Studies In
Computers, Science And Engineering, vol. 2, (1), Mar. 2013.
205 Sivakumar Naganathan, Kamal Nasharuddin Mustapha
& Kalavagunta Sreedhar. “A Review Of Epoxy Resins
And Nano Materials.” International Journal Of Advanced
Material Science, vol. 4, (1), pp. 81-84, May 2013.
206 Sreedhar Kalavagunta, Sivakumar Naganathan & Kamal
Nasharuddin Bin Mustapha. “Pushover Analysis For Cold
Formed Storage Rack Structures.” Jordan Journal Of Civil
Engineering, vol. 6, (4), Oct. 2012.
207 Sumayyah Mohd Idris, Mohammed Rafid Haleem Al-Taha,
Aiman Ismail, Fairuz Abdullah, Md Zaini Jamaludin &
Mohammed Hayder Al-Mansoori. “Sensitivity and Stability
Characterization of Linear Cavity Erbium-Doped Fiber
Laser for Pressure Measurement.” Microwave and Optical
Technology Letters, June 2012.
208 T. F. Al-Mashhadani, M. Z. Jamaludin, M. H. Al-Mansoori, F.
Abdullah & A. K. Abass. “Modeling Of Multi-Wavelength
Brillouin Fiber Laser Based On Analytical Solutions In A
Linear Cavity.” Fiber And Integrated Optics, vol. 31, pp. 383–
396, Dec. 2012. doi: 10.1080/01468030.2012.742599
209 T. M. I. Mahlia, L. W. Cheng, L. C. S. Salikka, C. L. Lim, M.
H. Hasan & U. Hamdani. “Drying Garcinia Atroviridis
Using Waste Heat From Condenser Of A Split Room Air
Conditioner.” International Journal Of Mechanical And
Materials Engineering, vol. 7, (2), pp. 171-176, Dec. 2012.
210 T. M. Indra Mahlia. “A Global Comparative Review
Of Biodiesel Production From Jatropha Curcas Using
Different Homogeneous Acid And Alkaline Catalysts:
Study Of Physical And Chemical Properties.” Renewable
And Sustainable Energy Reviews, vol.24, pp. 514-533, Jul.
2013.
198 Shahida Begum & Faris Tarlochan. “Analyzing The Influence
Of Process Parameters On Anode Usage In Electroplating
Process.” Asian Journal Of Applied Sciences, Jan. 2013.
211 T. M. Indra Mahlia. “Energy, Exergy, Environmental And
Economic Analysis Of Industrial Fired Heaters Based
On Heat Recovery And Preheating Techniques.” Energy
Conversion And Management, vol. 7, pp. 51-56, Jul. 2013.
199 Shahida Begum, A. N. Mustafizul Karim & M. A Shafii.
“Investigation On Wall Thinning And Creep Damage In
Boiler Tube Due To Scale Formation.” Advanced Materials
Research, vol. 538-541, pp. 1781-1784, June 2012.
212 T. M. Indra Mahlia. “Overview Properties Of Biodiesel
Diesel Blends From Edible And Non-Edible Feedstock.”
Renewable And Sustainable Energy Reviews, vol. 22, pp.
346-360, Jun. 2013.
113
213 T. M. Indra Mahlia. “Liquid–Gas Boundary Catalysis By
Using Gold/Polystyrene-Coated Hollow Titania.” Journal
Of Colloid And Interface Science, vol. 394, pp. 490-497,
Mar. 2013.
214 T. M. Indra Mahlia. “Analysis And Evaluation Of Various
Aspects Of Solar Radiation In The Palestinian Territories.”
Energy Conversion And Management, vol. 73, pp. 57-68,
Jun. 2013.
215 T. M. Indra Mahlia. “Characterization And Production Of
Ceiba Pentandra Biodiesel And Its Blends.” Fuel, vol. 107,
pp. 855-858, Jun. 2013.
216 T. M. Indra Mahlia. “Current And Future Energy And Exergy
Efficiencies In The Iran’S Transportation Sector.” Energy
Conversion And Management, vol. 74, pp. 24-34, Jun. 2013.
217 T. M. Indra Mahlia. “Current Utilization Of Microturbines
As A Part Of A Hybrid System In Distributed Generation
Technology.” Renewable And Sustainable Energy Reviews,
vol. 21, pp. 142-152, May 2013.
218 T. M. Indra Mahlia. “International Experience On Incentive
Program In Support Of Fuel Economy Standards And
Labelling For Motor Vehicle: A Comprehensive Review.”
18-33, May 2013.
219 T. M. Indra Mahlia. “Investigation Of Physical And Chemical
Properties Of Potential Edible And Non-Edible Feedstocks
For Biodiesel Production, A Comparative Analysis.”
749-755, May 2013.
220 T. M. Indra Mahlia. “Non-Edible Vegetable Oils: A Critical
Evaluation Of Oil Extraction, Fatty Acid Compositions,
Biodiesel Production, Characteristics, Engine Performance
And Emissions Production.” Renewable And Sustainable
Energy Reviews, vol. 18, pp. 211-245, Apr. 2013.
221 T. M. Indra Mahlia. “Production And Comparative Fuel
Properties Of Biodiesel From Non-Edible Oils: Jatropha
Curcas, Sterculia Foetida And Ceiba Pentandra.” Energy
Conversion And Management, vol. 73, pp. 245-255, Jun.
2013.
222 T. M. Indra Mahlia. “Techno-Economic Analysis Of An
Optimized Photovoltaic And Diesel Generator Hybrid
Power System For Remote Houses In A Tropical Climate.”
Energy Conversion And Management, vol. 69, pp. 163-173,
May 2013.
223 Takahiro Abe, N. M. L. Tan & Hirofumi Akagi. “Experimental
Discussion On A 6-Kw, 2-Kwh Battery Energy Storage
System Using A Bidirectional Isolated Dc-Dc Converter.”
Ieej Transactions On Industry Applications, vol. 132, no.
2, pp. 233-240, Feb. 2012.
224 E. S. Tan, Muhammad Anwar Zulhairi, Mohd Azree Idris &
Adnan Roseli. “Biodiesel For Gas Turbine Application - An
Atomization Characteristics Study.” Advanced Technologies
Of Internal Combustion Engines And Fuel Solutions, Feb.
2013.
225 Yin T. S. & C. Y. Lee. “Shear Strength Behaviour Of Mining
Sand Treated With Clay And Hydrated Lime.” International
Journal Of Civil And Structural Engineering, vol. 2, (3), pp.
970-983, Feb. 2012.
226 Tiagrajah V.Janahiraman & W. Kong. “Som Based
Segmentation Method For Water Region Detection In
Satellite Images.” World Journal Of Engineering, vol. 10,
(1), pp. 95-99, Feb. 2013.
114
209 W. K. H. Almusafer, M. H. Al-Mansoori, M. Z. Jamaludin,
F. Abdullah, M. Ajiya & M. A. Mahdi. “Widely Tunable
C+L Bands Multiwavelength Befl With Double-Brillouin
Frequency Shifts.” IEEE Photonics Journal, vol. 4, (5), Oct.
2012.
210 Wan Mansor Wan Muhamad, Endra Sujatmika, Hisham
Hamid, & Faris Tarlochan. “Design Improvement Of
Steering Knuckle Component Using Shape Optimization.
International Journal Of Advanced Computer Science.”
International Journal Of Advanced Computer Science, vol.
2, (2), Feb. 2012.
211 L. S. Wong, Roslan Hashim & Faisal Ali. “Improved
Strength And Reduced Permeability Of Stabilized Peat:
Focus On Application Of Kaolin As A Pozzolanic Additive.”
Construction And Building Materials, vol. 40, pp. 783-792,
Feb. 2013.
212 L. S. Wong, Roslan Hashim & Faisal Ali. “Utilization Of
Sodium Bentonite To Maximize The Filler And Pozzolanic
Effects Of Stabilized Peat.” Engineering Geology, vol. 152,
(1), pp. 56-66, Jan. 2013.
213 Y. L. Sim & C. Y. Lee. “Some Geotechnical Properties of
Palm Biodiesel Contaminated Mining Sand and Weathered
Granite Soil.” International Journal Of Advanced Scientific
Engineering And Technological Research, vol. 1, (4), Aug.
2012.
214 Yanti Erana Jalil, Chandan Kumar Chakrabarty & Baskaran
Kasi. “A Compact Wideband Microstrip Antenna Intergrated
With Band-Notched Design.” European Journal Of Scientific
Research, vol. 77, (4), July 2012.
215 B. K. Yap, Nor Azrina Talik, Zaliman Sauli, F. J. Siow &
Vithyacharan Retnasamy. “Finite Element Analysis Of
Thermal Distributions Of Solder Ball In Flip Chip Ball Grid
Array Using Abaqus.” Microelectronics International, vol.
30, (1), pp. 14-18, Jan. 2013.
216 B. K. Yap, C. H. Tan, Ramasamy Agileswari, C. Lo.
“Comparison Study On Reliability Performance For Polymer
Core Solder Balls Under Multiple Reflow And Hts Stress
Tests.” Microelectronics Reliability, vol. 53, (1), pp. 164173, Aug. 2012.
217 Yass K. Salih, H. S. Ong & Salman Yussof. “MIH: State Of Art
And A Proposed Future Direction In The Heterogeneous
Wireless Networks.” Journal Of Applied Sciences, Aug.
2012.
218 W. S. Yeo. “X-Ray Powder Diffraction Studies Of
Mechanically Milled Cobalt.” Advanced Materials Research,
vol. 626, pp. 913-917, Jan. 2013.
219 Yuzainee Md Yusoff, Mohd. Zaidi Omar, Azami Zaharim,
Azah Mohamed & Norhamidi Muhamad. “Employability
Skills Performance Score for Fresh Engineering Graduates
in Malaysian Industry.” Asian Social Science, vol. 8, (16),
pp.14, Nov. 2012.
220 Z. A. Majid, R. Mohsin & M. Z. Yusof. “Experimental And
Computational Failure Analysis Of Natural Gas Pipe.”
Engineering Failure Analysis, vol.19, pp. 32–42, Jan. 2012.
221 Z. L. Tai & H. S. Ong. “Thermal Model For Harvesting Waste
Heat From Microprocessor Using Shunt Configuration.”
Asian Journal Of Scientific Research, vol. 2, (6), pp. 381387, Jan. 2013.
222 Z.A. Majid, R. Mohsin & M.Z. Yusof. “Experimental And
Computational Failure Analysis Of Natural Gas Pipe.”
Engineering Failure Analysis, vol. 19, pp. 32–42, Jan. 2012.
223 Zakaria Che Muda, S. Y. Kong, Salah F. A. Sharif, Fathoni
Usman, Lariyah Mohd Sidek & Nawfal S. Farhan. “A Review –
Local Failure On Concrete Target Due To Projectile Impact.”
International Journal Of Automotive And Mechanical
Engineering (IJAME), vol. 4, (1), Dec. 2012.
7
Alaa A. Shakir, Sivakumar Naganathan & Kamal Nasharuddin
Mustapha. “Green Bricks From Wastes,” in International
Conference Of Advanced Materials And Technoilogy ICAMET
2012, 2012.
8
Ammar Ahmed Alkahtani, Farah Hani Nordin, Z. A. M.
Sharrif & Nur Badariah Ahmad Mustafa. “Analysis on
RF Emission of Electrical Appliances,” in 2012 IEEE
International Conference On Control System, Computing
And Engineering, 2012, pp. 549-553.
9
Arazi Bin Idrus, K. Yap, Mohd Faris Khamidi& Mohd Saiful
Zakaria. “Estimation of Production rates for Formwork
Installation using Fuzzy Expert Systems.” Global Journal Of
Researches In Engineering Civil And Structural Engineering,
2012, 12, (1).
224 Zakaria Che Muda, Salah F. A. Sharif & J. H. Ng. “Flexural
Behavior Of Lightweight Oil Palm Shells Concrete Slab
Reinforced With Geogrid.” International Journal of Scientific
and Engineering Research (IJSER), vol. 3, (11), Nov. 2012.
225 Zakaria Che Muda, Salah F. A. Sharif & Y. L. Tan. “Impact
Behavior Enhancement Of Oil Palm Shells Concrete Slab By
Geogrid Reinforcement.” International Journal of Scientific
and Engineering Research (IJSER), vol. 3, (11), Nov. 2012.
226 Zakaria Che Muda, Salah F. A. Sharif, Lariyah Mohd Sidek
& Nawfal S. Farhan. “A Review – Local Failure On Concrete
Target Due To Projectile Impact.” International Journal Of
Automotive And Mechanical Engineering (IJAME), vol. 4,
(1), Dec. 2012.
10 Ayad Atiyah Abdulkafi, S. K. Tiong, J. Koh, D. Chieng & A.
Ting. “Energy Efficiency and Cell Coverage Area Analysis
for Macrocell Networks,” in 2012 International Conference
On Future Communication Networks, 2012, pp. 1-6.
227 Zakaria Che Muda, Salah F. A. Sharif, Mohammed A. AlAdemi, Lariyah Mohd Sidek & Nawfal S. Farhan. “Utilization
Of Pulverized Fuel Ash As A Cement Replacement For
Soil-Cement Bricks.” International Journal Of Automotive
And Mechanical Engineering (IJAME), vol. 4, (1), Dec. 2012.
11 C. H. Goh, Nguyen Thi Ngoc Tho, Chandan Kumar Charabarty
& S. K. Tiong. “Design Of Patch Antennas Array At Low
Frequency Application By Using Unknown FR4 Material,”
in 2011 IEEE International Conference On Control System,
Computing And Engineering, 2012, p. 302.
228 Zulkarnain Hassan, Sobri Harun & Marlinda Abdul Malek.
“Application Of ANNS Model With The SDSM For The
Hydrological Trend Prediction In The Sub-Catchment Of
Kurau River, Malaysia.” Journal Of Environmental Science
And Engineering, vol. 1, (5), pp. 577-585, May 2012.
12 Chandrika M. J., Lariyah M. S. & Alicia Y.C. Tang. “GPT
Onto: A New Beginning for Malaysia Gross Pollutant Trap
Ontology,” in ICOSE, (72), pp. 816-820, 2012.
Proceedings
1
A. K. Abass, M. H. Al-Mansoori, M. Z. Jamaludin, F.
Abdullah & T. F. Al-Mashhadani. “Raman Amplification
Effects On Stimulated Brillouin Scattering Threshold In
Multiwavelength Brillouin-Raman Fiber Laser,” in 2012
IEEE 3rd International Conference On Photonics (ICP2012),
2012, pp. 171-174, doi: 10.1109/ICP.2012.6379832
13 Darsheena Daud, Adlansyah Abd Rahman, Abd Halim
Shamsuddin, Nazira Abidin, Intan Irieyana Zulkepli &
Mohd Nasharuddin Ja’afar. “Malaysian Biomass Upgrading
By Torrefaction,” in Proc. 3rd International Conf. On
Environmental Research And Technology (ICERT2012),
2012, vol. 1, pp. 428-441.
14 D. F. W. Yap, S. P. Koh, S. K. Tiong, E. Y. S. Sim & M. W. Yaw.
“Artificial Immune Algorithm Based Gravimetric Fluid
Dispensing Machine,” in 11th International Conference
On Hybrid Intelligent Systems, 2012, pp. 406-410.
2
A. L. Lee, Azrul Ghazali, S. T. Y. Chan & C. F. Chau . “Sequential
Circuit Design using Quantum-Dot Cellular Automata
(QCA),” in IEEE International Conference On Circuits And
Systems (ICCAS2012), 2012, pp. 162-167.
15 DeAbdulkareem Mokif Obais& Jagadeesh Pasupuleti. “Sign
of a Statcom-Based Harmonic-Free Static VAR Compensator
for Load Balancing Purposes.” Caspian Journal Of Applied
Sciences Research, vol. 1, (11), 2012, pp. 89-96.
3
A. Mohd Ariffin, N. Mat Tajudin & H. A. Illias. “Investigation
on Electroluminescence as Pre-Breakdown Phenomenon
within Dielectric Materials used for Cable Insulation,” in
2012 IEEE International Conference On Condition Monitoring
And Diagnosis, 2012, pp. 1114-1117.
16 E. S. Tan & Muhammad Anwar Zulhairi. “Feasibility Of
Biodiesel As Microturbine Alternative Fuel Through
Atomization Characteristics Study,” in ASME Turbo Expo,
2012.
4
A. Mohd Ariffin, S. Sulaiman, A. Z. Che Yahya & A. B. Abd.
Ghani. “Analysis of Cable Insulation Condition using
Dielectric Spectroscopy and Polarization / Depolarization
Current Techniques,” in 2012 IEEE International Conference
On Condition Monitoring And Diagnosis, 2012, pp. 145148.
5
6
A. Mohd Ariffin, T. M. Kuan, S. Sulaiman & H. A. Illias.
“Application Of Time Domain Reflectometry Technique
In Detecting Water Tree Degradation Within PolymericInsulated Cable,” in 2012 IEEE International Conference On
Condition Monitoring And Diagnosis, 2012, pp. 1163-166.
A.K. Abass, M. Z. Jamaludin, M. H. Al-Mansoori, T. F. Ahmed,
& F. Abdullah. “An Overview of Multi wave length BrillouinRaman Fiber Laser.” Journal Of Advanced Laser And Optics
Research, 2012, 1, pp. 1-6.
17 Ewe Lay Sheng & Faridah Basaruddin. “Ways Of Improving
Students Performances In Assessments From Instructors
And Students Perspectives,” in International Conference
Of Teaching And Learning In Education, 2013, p. 69.
18 Fatanah Mohamad Suhaimi, J. G. Chase, A. J. Le Compte,
C. G. Pretty, R. Elliott, A. Wenz, G. M.Shaw & Normy Abdul
Razak. “Assessing Microcirculation Condition In Critical
Illness Using The Pulse Oximeter’s Concept,” in 2012
IEEE Embs Conference On Biomedical Engineering (IECBES
2012), 2012.
19 Faten Nadiah Fessol & Azrul Bin Mohd Ariffin. “Influence
Of Underground Cable Insulation Parameters On Transient
Overvoltages,” in 2013 Ieee 7th International Power
Engineering And Optimization Conference (Peoco 2013),
2013, pp. 357-360.
20 G. Harii Krishna Rao, Mohamed Ansari M. Nainar & Shahida
Begum. “Application Of Taguchi Method For End Milling
115
Optimization Of Mwcnt Reinforced Epoxy Composite,” in
International Conference On Advancements In Polymeric
Materials, 2013, p. 328.
21 L. K. Gan, Fazrena Azlee Hamid & Syed Khaleel Ahmed.
“Tunable Loop Filter In Fractional-N Frequency Synthesizer
For Wireless Applications,” in 10th IEEE International
Conference On Semiconductor Electronics (ICSE), 2012,
pp. 636-640.
22 S. M. Goh, C. F. Chau, Mohd Zafri Baharuddin & Izham
Zainal Abidin. “Implementation Of Graduate Exit Survey
Using Moodle,” in International Conference On Teaching
And Learning In Education (ICTLE 2013), 2013, pp. 288291.
23 H. A. Elgomati, B. Y. Majlis, A. M. Abdul Hamid, P. M. Susthitha
& I. Ahmad. “Modelling of Process Parameters for 32nm
PMOS Transistor Using Taguchi Method,” in The 2011
IEEE Regional Asia Modelling Symposium, The Sixth Asian
International Conference On Mathematical Modelling And
Computer Simulation, 2012.
24 H. A. Illias, A. H. A. Bakar, H. Mokhlis, M. A. Tunio, G. Chen, P.
L. Lewin & A. Mohd Ariffin. “Simulation Of Partial Discharge
Within A Void Under Square Waveform Applied Voltage,”
in IEEE Conference On Electrical Insulation And Dielectric
Phenomena, 2012, pp. 76-79.
25 H. A. Illias, Q. L. Ng, A. H. A. Bakar, H. Mokhlis & A Mohd
Ariffin. “Electric field distribution in 132 kV XLPE cable
termination model from finite element method,” in 2012
IEEE International Conference On Condition Monitoring
And Diagnosis, 2012, pp. 80-83.
26 H. A. Illias, Z. H. Lee, A. H. A. Bakar, H. Mokhlis & A.
Mohd Ariffin. “Distribution of electric field in medium
voltage cable joint geometry,” in 2012 IEEE International
Conference On Condition Monitoring And Diagnosis, 2012,
pp. 1051-1054.
27 H. Misran, M. A. Salim, N. N. H. Shah, N. A. A. Razak, S.
Z. Othman, M. A. Yarmo & S. Ramesh. “Non-Surfactant
Synthesis And Characterization Of Nanostructured
Materials,” in Proc. 1st International Conference on Emerging
Nanomaterials.
28 H. S. Woon, C. Y. Tan, L. S. Ewe & N. Puteri. “Synthesis And
Characterization Of Mill Scale-Doped Strontium Hard
Ferrites,” in Materials Leading The Path Of Engineers, 2012.
29 H. Zainol Abidin & N. Md Din. “Provisioning WSN Coverage
Via Minimax Based Sensor Node Placement Scheme,” in
IET International Conference On Wireless Communications
And Applications (ICWCA 2012), 2012.
30 Haider Jabber A., N. M. Din, M. H. Al-Mansoori, F. Abdullah,
Hilal A.Fadhl, Noora Salim & Adnan Saher. “Influence of Four
Wave Mixing on Modulation Format Performance Under
100 Gb/s Data Rate,” in 2012 IEEE Student Conference On
Research And Development, 2012.
31 Herda Yati Binti Katman, Norlela Bte Ismail, Shuhairy Bin
Norhisham, Mohd Rasdan Ibrahim & Mohd Yazip Matori.
“Effects Of Reclaimed Asphalt Pavement On Indirect
Tensile Strength Test Of Foamed Asphalt Mix Tested In
Dry Condition,” in 4th International Conference On Energy
And Environment, 2013.
32 Herda Yati Katman, Mohd Rasdan Ibrahim, Mohd. Yazip
Matori, Shuhairy Norhisham, Norlela Ismail & Rohayu Che
Omar. “Effect Of Foamed Bitumen On Tensile Strength Of
Reclaimed Asphalt Pavement Mix,” in Proc. International
Seminar On Regional Economic Development Through
116
Science, Technology, And Art, 2012, 1, pp. 428-441.
33 Husna Zainol Abidin & Norashidah Md. Din. “Sensor Node
Placement Based On Minimax For Effective Surveillance,”
in 2012 IEEE Symposium On Industrial Electronics &
Applications (ISIEA 2012), Sep. 2012.
34 Husna Zainol Abidin & Norashidah Md. Din. “Sensor
Node Placement Based On Lexicographic Minimax,” in
1st International Symposium On Telecommunication
Technologies (ISTT2012), 2012.
35 I. S. Mustafa, N. M. Din, A. Ismail & Omar R. C. “Use of
Geographic Information System (GIS) Tools as Network
Planning Aid for Antenna Mounting in Remote Areas,”
in 1st International Symposium On Telecommunication
Technologies (ISTT2012), 2012.
36 Izham Z. Abidin, K. S.Yap, Nira Saadun, Sheikh Kamar
Sheikh Abdullah & Mohd Khairun Nizam Mohd Sarmin.
“MOSELM approach for Voltage Stability Indicator using
Phasor Measurement Units,” in IEEE Power And Energy
Conference 2012 (PECON2012), 2012.
37 K. H. Oon, Chandan Kumar Chakrabarty & C. H. Goh. “Circuit
Modeling For Rectangular Printed Disc Monopole Antenna
With Slot For Uwb System,” in 3rd International Conference
On Intelligent Systems Modeling And Simulation, 2012.
38 K. K. A. Devi, Norashidah Md. Din, C. K. Chakrabarty &
S. Sadasivam. “Design Of An Rf - Dc Conversion Circuit
For Energy Harvesting,” in 2012 IEEE International
Conference On Electronics Design, Systems And Applications
(ICEDSA2012), 2012.
39 Khairul Salleh Mohamed Sahari, Adzly Anuar, Syed
Sulaiman Kaja Mohideen, Mohd Zafri Baharuddin, Iszmir
Nazmi Ismail, Nur Maisurah Hassan Basri, Nur Shahida
Roslin, Mohd Azwan Aziz & Badrol Ahmad. “Development
Of Robotic Boiler Header Inspection Device,” in The 6th
International Conference On Soft Computing And Intelligent
Systems, And The 13th International Symposium On
Advanced Intelligent Systems, 2012.
40 Khairul Salleh Mohamed Sahari, H, M. Chew & Y. C. Hou.
“Dynamic Modeling of String for Robotics Application,” in
The 6th International Conference On Soft Computing And
Intelligent Systems, And The 13th International Symposium
On Advanced Intelligent Systems, 2012.
41 T. M. Kuan & Azrul Bin Mohd Ariffin. “Development
Of Treeing Detection Method For Cable With Three
Insulation Regions Using Tdr Technique,” in 2013 Ieee
7th International Power Engineering And Optimization
Conference (Peoco 2013), 2013, pp. 167-172.
42 M. A. Salim, H. Misran, S. Z. Othman, N. N. H. Shah, N. A. A.
Razak & H. Abdullah. “Facile Processing of Si-Cu Core-Shell
as Potential Meta-atom Materials,” in 3rd International
Conference On Photonics, 2012.
43 M. H. Ali, F. Abdullah, M. Z. Jamaludin, M. H. Al-Mansoori,
A. Ismail & A. K. Abass, “Simulation and Experimental
Validation of Gain Saturation in Raman Fiber Amplifier,”
in 2012 IEEE 3rd International Conference On Photonics
(ICP), 2012, pp. 27-29.
44 M. S. Bahrudin, S. F. Abdullah & I. Ahmad. “Statistical
Modeling of Solar Cell using Taguchi Method and
TCAD Tool,” in 10th IEEE International Conference On
Semiconductor Electronics (ICSE2012), 2012.
45 Marwan A., Farrukh Nagi, K. S. M. Sahari & Hanim S.
“Real-Time Tracking Controllers For Scara Robot,” in Proc.
International Conference On Engineering And Information
Technology, Toronto, 2012, Sep. 17-18.
46 Mohamed Ansari M. Nainar, Reshma M.A. & Sughanthy.S.
“The Role Of Polymers In Tissue Engineering Applications,”
in International Conference On Advancements In Polymeric
47 Mohd Najib Hamsan, Mohamed Ansari M. Nainar, Nainar.S.M.
& Shahida Begum. “Simulation Of Poly-Lactic Acid –
Hydroxyapatite Biocomposite Injection Moulding Using
Moldflow,” in International Conference On Advancements
In Polymeric Materials, 2013, p. 348.
48 Musdalilah Ahmad Salim, Halina Misran, Siti Zubaidah Bte
Othman, N. N.H. Shah, Nur Afiqah Abdul Razak & Abreeza
Noorlina Bte Abd. Manap. “Renewable Decyl-Alcohol
Templated Synthesis Of Si-Cu Core-Shell Nanocomposite,”
in IOP Conference Series: Earth and Environmental Science,
vol. 16, 2013, doi: 10.1088/1755-1315/16/1/012075
49 N. A. M. Radzi, N. M. Din, S. K. Sadon & M. H. Al-Mansoori.
“Implementing static bandwidth allocation in EPON
testbed,” in 1st IEEE International Symposium On
Telecommunication Technologies, 2012.
50 N. M. L. Tan, Takahiro Abe & Hirofumi Akagi. “Optimal
Design Of A High-Efficiency Bidirectional Isolated Dc-Dc
Converter Across A Wide Range Of Power Transfer,” in
2012 IEEE International Conference On Power And Energy
(PECON2012), 2012, pp. 22-27.
51 N. A. M. Radzi, N. M. Din, M.H. Al-Mansoori & M.S.A. Majid.
“A PIC Implementation of Upstream Transmission for
EPON,” in IEEE 3rd International Conference On Photonics
(ICP), 2012, pp. 38-42.
52 Nainar S. M., Shahida Begum, Mohamed Ansari M.
Nainar, Zaimah Hasan, Anuar. H., R. A. Shanks & I. Kong.
“Thermal Properties Of Poly(Lactic Acid) –Hydroxyapatite
Biocomposite For Bone Scaffolds,” in International
Conference On Advancements In Polymeric Materials, 2013,
p. 297.
53 Nasri A. Hamid, Mohd. Zamri Yusoff & Mohd Syukri Yahya.
“Planning and Development of Nuclear Engineering
Program at Universiti Tenaga Malaysia (UNITEN),” in
International Conference On Teaching And Learning In
Higher Education (Ictlhe 2012), 2012.
54 Nasri A. Hamid, Yusof Abdullah, Siti Khalilah Mohd Razif
& Mohd Shahrul Nizam Asbullah. “Effects Of Electron
Irradiation On The Phase And Microstructure Of Tio2 Added
Bi2sr2cacu2o8 (Bi-2212) Superconductor Ceramics,” in
Proc. American Institute Of Physics Conferenc, 2013, p.
288-291.
55 K. C. Ng, Y. L. Ng & Mohd. Zamri Bin Yusoff. “Development
Of A Lagrangian Meshless Flow Solver Based On The Moving
Particle Semi-Implicit (Mps) Method,” in Iop Conference
Series: Earth And Environmental Science, vol. 16, 2013,
doi: 10.1088/1755-1315/16/1/012151
56 Y. L. Ng, K. C. Ng & Mohd. Zamri Bin Yusoff. “Development
Of A Lagrangian Meshless Flow Solver Based On The Moving
Particle Semi-Implicit (Mps) Method,” in Iop Conference
Series: Earth And Environmental Science, vol. 16, 2013,
doi: 10.1088/1755-1315/16/1/012151
57 Nirmalen Navalan, Mohamed Ansari M. Nainar, & W. V.
Vicki. “Mechanical Properties Of Poly(Ehtylene Co-Acrylic
Acid) Based Biocomposites For Dental Applications,” in
58 Normy N. Razak, Fatanah M. Suhaimi, J. G. Chase, G. M.
Shaw. “Robustness Analysis of a Model-Based Control
Protocol for Transition from ICU to Less Critical Ward,”
in IEEE EMBS Conference On Biomedical & Engineering
Sciences (IECBES) 2012, 2012.
59 Nur Irmawati Bt Om, Prem Gunnasegaran & Rajasegaran
Subramaniam. “Influence Of Sinusoidal Flow On The
Thermal And Hydraulic Performance Of Microchannel
Heat Sink,” in 4th International Conference On Energy And
Environment 2013 (Icee 2013), 2013, doi: 10.1088/17551315/16/1/012075
60 Nurul Asyikin Mohamed Radzi, Norashidah Md. Din,
Mohammed Hayder Al-Mansoori & Mohd. Shahmi Abdul
Majid. “Managing Differentiated Services in Upstream
EPON,” in Software Engineering And Computer Systems
Communications In Computer And Information Science,
2012.
61 Om Gajendra & Mohamed Ansari M. Nainar. “Effect Of
Sintering Temperature On Mechanical Properties Of
Hydroxyapatite/Zirconia Composites,” in International
Conference On Advancements In Polymeric Materials, 2013,
p. 295.
62 P. Susthitha Menon, S. Kalthom Tasirin, Ibrahim Ahmad &
S.Fazlili Abdullah. “High speed SiGe/Si MQW SOI-based
Lateral PIN Photodiode,” in IOP Proceedings, 2012.
63 J. S. Pang, Mohamed Ansari M. Nainar, Omar Suliman
Zaroog, Moaz H. Ali & S.M. Sapuan. “Optimization Of
Machining Parameters On The End Milling Process Of Hnt/
Al/Epoxy Hybrid Composite,” in International Conference
On Advancements In Polymeric Materials, 2013, p. 331.
64 Poornima Kanasen & Mohamed Ansari M. Nainar. “Injection
Moulding Process And Cooling Channel Optimization Using
Moldflow Plastic Insight,” in International Conference On
Advancements In Polymeric Materials, 2013, p. 333.
65 R. J. K. Wong, Chandan Kumar Chakrabarty, C. H. Goh,
Ahmad Basri Ghani & Zairul Aida Abu Zarim. “Dissipation
Factor Measurement of PILC Insulation at UHF,” in 2012
Third International Conference On Intelligent Systems
Modelling And Simulation, 2012, p. 157.
66 S. Kalthom Tasirin, P. Susthitha Menon, Ibrahim Ahmad
& S. Fazlili Abdullah. “High Performance of a Lateral Pin
Photodiode Using SiGe/Si Multilayer Quantum Well /
Quantum Dot,” in 10th IEEE International Conference On
Semiconductor Electronics (ICSE2012), 2012.
67 S.Kalthom Tasirin, P.Susthitha Menon, Ibrahim Bin Ahmad
& Siti Fazlili Abdullah. “High Performance Silicon Lateral
Pin Photodiode,” in Iop Conference Series: Earth And
Environmental Science (Ees), 2013.
68 Sadam Hade Hussein, Kamal Nasharuddin Bin Mustapha,
Zakaria Che Muda & Salmia Budde. “Modeling Of Ultimate
Load For Lightweight Palm Oil Clinker Reinforced Concrete
Beams With Web Openings Using Response Surface
Methodology.” International Journal of Civil Engineering
and Technology (IJCIET), vol. 3, (1), 2012.
69 Sana Muqeem, Arazi Bin Idrus, Mohd Faris Khamidi, Y.
K. Siah, Muhammad Saqib. “Application of Fuzzy Expert
Systems for Construction Labor Productivity Estimation,” in
2012 International Conference On Computer & Information
Science (ICCIS), 2012, pp. 506-511.
70 Shahida Begum & Mohd Firdaus M Saad. “Techno-Economic
Analysis Of Electricity Generation From Biogas Using Palm
Oil Waste,” in ICPER 2012, 2012.
117
71 Shahida Begum, Faris Tarlochan & Kirubaharan
Sambasivam. “Optimization Of Anode Usage In
Electroplating Process By Using Response Surface
Methodology,” in ICAMME 2012 Conference Proceeding,
2012.
Conferences
1
Hafiz Ishak, Mohamed Nor Bin Mohamed Desa, Lariyah
Mohd Sidek, Hidayah Basri, Fukami Kazuhiko, Hanapi
Mohamad Noor & Livia Lahat. “Application Of Integrated
Flood Analysis System (Ifas) For Dungun River Basin,”
presented at 4th International Conference On Energy And
Environment, 2013.
2
A.H. Haron & M. Z. Yusoff. “Optimization Of Offline
Compressor Washing Interval For Gas Turbine Operation
(A Case Study At Gelugor Power Station)” presented at
National Graduate Conference 2012 (NatGrad2012), Nov.
8-10, 2012.
3
Abd Halim Shamsuddin & Adlansyah Abdul Rahman.
“Issues And Challenges Of Coal-Biomass Cofiring In
Malaysia,” presented at Eu-Asia Biomass Best Practices
And Busingee Partnering Conference, May, 2012.
4
Abd Halim Shamsuddin & Kumaran Palanisamy.
“Harnessing Renewable Energy From Biosolids And
Bioeffluent At Sewerage Treatment Plant,” presented at
the Waste Management Conference & Exhibition 2012
(WM2012), Kuala Lumpur, July 18-19, 2012.
5
Abd Halim Shamsuddin. “An Update On Research Activities
At Centre For Renewable Energy,” presented at Seminar
On Green Energy And Technologies, Putrajaya, Feb. 29,
2012.
6
Abdul Aziz Mohamed. “Study Of Polymer Natural Rubber
Blends By Small Angle X-Ray Scattering,” presented at 6th
Asia-Oceania Forum For Synchrotron Radiation Research
(AOFSRR2012), 2012.
7
Adlansyah Abd Rahman. “Upgrading Of Malaysian Biomass
For Cofiring With Coal,” presented at 2nd International
Workshop On Cofiring Biomass With Coal, Copenhagen,
Mar. 27-28, 2012.
78 Tayser Sumer Gaaz & Mohamed Ansari M. Nainar, Robert
A.Shanks & Ing Kong. “Thermo-Mechanical Properties
Of Polyurethane – Halloysite Nanotube Composites,” in
8
Ahmad Qisti Ramli & Ungku Anisa Ungku Amirulddin.
“Review of New Design Of Six Phase Rotary Converter
Electric Machine,” presented at National Conference On
Electrical & Electronic Engineering 2012 (NCEEE2012),
2012.
79 W.S. Yeo, Z. NurAmirah, H.S.C. Metselaar & T.H. Ong.
“X-ray Powder Diffraction Studies of Mechanically Milled
Cobalt,” in International Conference Of Advanced Materials
And Technology ICAMET 2012, 2012.
9
Ahmed RaheemAbdulnabi & H. S. Ong. “Study of the
Effects of Traffic Distribution in a Smart Metering Meshed
RF Wireless Network,” presented at National Graduate
Conference 2012 (NatGrad2012), Nov. 8-10, 2012.
80 Yanti Erana Jalil, Chandan Kumar Chakrabarty & Baskaran
Kasi. “Rectangular Patch Wideband Antenna with BandNotched Design,” in Symposium On Wireless Technology
& Applications (ISWTA2012), 2012.
10
Alaa. A. Shakir, Sivakumar Naganathan & Kamal
Nasharuddin Mustapha. “Assessment of the durability
of bricks in an aggressive environment,” presented at
8-10, 2012.
11
Ali M. Humada Aljmaili, A. Mohd Ariffin & Khalid G.
Mohammed. “Analysis Of Fault Transient Behaviour Within
Underground Cable Transmission,” presented at National
Graduate Conference 2012 (NatGrad2012), Nov. 8-10,
2012.
72 Shivan Ismael Abdullah, Mohamed Ansari M. Nainar &
N. M. Huang. “Electrical Properties Of Graphene Oxide /
Epoxy Nanocomposite,” in International Conference On
Advancements In Polymeric Materials, 2013, p. 312.
73 Siti Sarah Ain Fadhil & Hasril Hasini. “The Effect of
Loading Condition on the Formation of Residual Swirl in
Tangentially-fired Boiler,” in Proc. American Institute Of
Physics, 2012, pp. 1049-1058.
74 Suhaila Binti Sulaiman, Do Trung Kien & Azrul Bin
Mohd Ariffin. “Simulation Modeling Of Polarization
And Depolarization Current Analysis For Underground
Cable Insulation,” in 2013 Ieee 7th International Power
Engineering And Optimization Conference (Peoco 2013),
2013, pp. 353-356.
75 Syakirah W. Abdullah, Aishah M. Isa & Miszaina Osman.
“Real And Reactive Power Forecast Model For Long Term
Demand In Peninsular Malaysia,” in 5th IASTED Asian
Conference On Power And Energy Systems, 2012.
76 Syed Zainal Abidin Syed Kamarul Bahrin & Ungku Anisa
Ungku Amirulddin. “Design And Development Of A New
Electromagnetic Prime Mover: Solenoid Powered Engine
Preliminary Design,” in 2012 IEEE International Conference
On Control System, Computing And Engineering, 2012.
77 T. F. Al-Mashhadani, M.H. Al-Mansoori, M.Z Jamaludin, F.
Abdullah & A. K. Abass. “Effect of Uni-directional and Bidirectional Cavity Structure on the Performance of Brillouin
Fiber Laser,” in 2012 IEEE 3rd International Conference
On Photonics (ICP2012), 2012, pp. 23-26, doi: 10.1109/
ICP.2012.6379849
81 Yass K. Salih, H. S. Ong & Salman Yussof. “A Fuzzy Predictive
Handover Mechanism Based On Mih Links Triggering In
Heterogeneous Wireless Networks,” in Proc. The 2012
International Conference On Software And Computer
Applications (Icsca 2012), 2012, 41, pp. 225-229.
82 W. S. Yeo, Meenaloshini Satgunam, Prem Gunnasegaran &
F. L. Pua. “Allotropic Phase Transformation In Mechanically
Milled Cobalt And Co-Al2o3 Powder Mixture,” in 9th
International Conference On Fracture & Strength Of Solids
(Feofs), 2013.
83 Z. L., Tai & H. S., Ong. “Placement Effect Of Mems
Thermoelectric Generator To Harvest Waste Heat Using
Shunt Configuration For Microprocessor,” in IEEE Conference
On Semiconductor Electronics (ICSE 2012), 2012, pp. 1013.
118
12 Ali Zare, Behzad Shahizare & M. N. M. Ansari. “The prediction
of mechanical properties in Epoxy-carbon composite by
EES (Engineering Equation Solver) software,” presented
at National Graduate Conference 2012 (NatGrad2012),
Nov. 8-10, 2012.
13 Arabi N.S. Al Qadi, Kamal Nasharuddin Bin Mustapha,
Sivakumar Naganathan & Qahir N. S. AL-Kadi. “Optimization
Of Water To Powder Ratio On Fresh And Hardened
Properties Of Self-Compacting Concrete,” presented at
11th International Conference on Concrete Engineering
and Technology 2012 - CONCET2012, 2012.
2012.
14 Azmi Ahmad. “Co-Curriculum Activities Of Universiti Tenaga
Nasional’S Students From 2010 To 2013 – A Review,”
presented at International Conference On Teaching And
Learning In Education (ICTLE 2013), Melaka, 2013.
27 H. S. Woon, C. K. Ho, R. Riza & S. Y. Leow. Monte Carlo.
“Magnetic Properties Of Oxide Waste-Derived Isotropic
Strontium Hexaferrites,” presented at the BIT’s 1st Annual
World Congress Of Advanced Materials 2012.
15 B. Nikouei, S. F. Taghizadeh & N. M. L. Tan. “Review Of
FACTS Devices Used In Transmission Line And Multilevel
Converter,” presented at National Graduate Conference
2012 (NatGrad2012), Nov. 8-10, 2012.
28 Haider Jabber Abd, N.M. Din, M. H. Al-Mansoori, F. Abdullah
& Noora Salim, and Mezher Hamed. “Effect Of Wavelength
Spacing Variation On Four Wave Mixing And System
Performance In The Presence Of Different Optical Fiber
Types,” presented at National Graduate Conference 2012
(NatGrad2012), Nov. 8-10, 2012.
16 Chandrika M. J., Lariyah M. S., L. Y. Lim, Sharmila R., S.
H. Nun, Aminah Ahmad & Hidayah B. “An Overview of
Knowledge Management in DeGPT System – via Knowledge
Audit,” presented at the 3rd International Conference On
Managing Rivers In The 21st Century: Sustainable Solutions
For Global Crisis Of Flooding, Pollution And Water Scarcity,
Penang, Dec. 6-9, 2012.
17 Chandrika M. J., Lariyah M. S., Sharmila R., Hidayah
B. & Aminah Ahmad. “K-Audit: A Tool to Determine
Effectiveness of Gross Pollutant Trap Decision Support
System,” presented at the 3rd International Conference On
Managing Rivers In The 21st Century: Sustainable Solutions
For Global Crisis Of Flooding, Pollution And Water Scarcity,
Penang, Dec. 6-9, 2012.
18 Chandrika M.J, Lariyah M.S. & Alicia Y.C. Tang. “Modeling
Ontology For Malaysian’S Gpt Data Repository,” presented
at the National Graduate Conference 2012 (NatGrad2012),
Nov 8-10, 2012.
19 Dao Viet Nga, Ong Hang See, Do Nguyet Quang, Y. X.
Chee & L. C. Lai. “Visualization Techniques In Smart Grid,”
presented at Internatioanl Conference On Smart Grid
Systems (ICSGS2012), 2012.
20 Dao Viet Nga, Ong Hang See, Do Nguyet Quang, Y. X. Chee.
“Open Source Gis-Based System For Displaying Data In
Smart Grid,” presented at Internatioanl Conference On
Smart Grid Systems (ICSGS2012), 2012.
21 Do Nguyet Quang, Ong Hang See, Dao Viet Nga, L. C. Lai, Y.
X. Chee & Shashiteran Karuppiah. “Customized Ping Tool
for Smart Grid Communication Network Testing,” presented
at International Conference On Advanced Computer Science
Applications And Technologies (ACSAT2012), 2012.
22 Endang Jati Mat Sahid, C. S. Tan & Y. P. Leong. “Sustainable
Energy Development - A case study for Malaysia,”
presented at the 16th International Conference On ISO &
TQM, Linnaeus University, Vaxjo, July 11-13, 2012.
23 E. H. Yeo, C. L. Cheah & P. L. Tan. “Simulation Of Error
Correction Techniques For Wireless Sensor Network,”
presented at National Graduate Conference 2012
(NatGrad2012), Nov. 8-10, 2012.
24 G. Harii Krishna Rao & M. N. M. Ansari. “Effect Of Cutting
Parameters On The Surface Roughness Of Mwcnt
Reinforced Epoxy Composites Using End-Milling Process,”
presented at Nanotech 2012, Santa Clara, CA, 2012.
25
G. Harii Krishna Rao & M. N. M. Ansari. “Morphological
Studies on CNC End Milled Surface of the MWCNT
Reinforced Epoxy Composite,” presented at National
2012.
26 C. Y. Gan, Khairul Salleh Mohamed Sahari & C. S. Tan.
“Numerical investigation of the Coanda flow over a
logarithmic surface for UAV system,” presented at National
29 Hazha Abdul Hamid, Mohd. Hariffin Boosroh, Md. Mujibur
Rahman & Ahmad Kamal Kadir. “The Design Enhancement
of Floating Trash Diverter System for Off-The-River Type
Hydropower Station,” presented at The 3rd International
Conference On Production, Energy And Reliability (Icper
2012): A Conference Of World Engineering, Science And
Technology Congress (Estcon), Kuala Lumpur, KL, June
12 – 14, 2012.
30 Hazha Abdul Hamid, Mohd. Hariffin Boosroh, Md. Mujibur
Rahman & Hasril Hasini. “Floating Trash Diverter System
For Significant Reduction Of Intake Clogging At Tenom
Pangi Hydro Power Station,” presented at 19th Conference
Of The Electric Power Supply Industry (CEPSI 2012), Oct.
15-19, 2012.
31 Heyam A. Marzog H. S. Ong. “Energy Saving Scheme For
Smart Energy Profile Protocol,” presented at National
2012.
32 Hidayah, B., Lariyah M. S., Anita, A., Roseli, Z. A., Salmia, B.,
Shuhairy, N., Nasir M. N. & Herda Yati, K. “Gross Pollutants
Analysis in Urban Residential Area For a Tropical Climate
Country,” presented at 5th Engineering Conference (EnCon
2012), Kuching, Sarawak, 2012.
33 Ibrahiem Abdul Razak Al-Ani, Lariyah Mohd Sidek,
Mohamad Nor Mohamad Desa & Noor Ezlin Ahmad Basri.
“Knowledge Based Expert System For Stormwater Pollution
Control In Malaysia,” presented at the HIDRAS33 National
Hydrology Conference.
34 Ibrahiem Abdul Razak Al-Ani, Lariyah Mohd Sidek &
Mohamed Nor Mohamed Desa. “Prediction Of The Life
Cycle Cost For Erosion And Sediment Control Measures,”
presented at the National Graduate Conference 2012
(NatGrad2012), 2012.
35 Intan Shafinaz Mustafa, Norashidah Md Dina & Rohayu
Omar. “A Multi Criteria Decision Support System For
Communication Network Planning Of Remote Power
Transmission Tower Slope Monitoring,” presented at
Awam International Conferences On Civil Engineering ’12
(Aicce’12) And Geohazard Information Zonation ’12 (Giz
’12), Penang, 2012.
36 Isam Aameer Ibrahim & H. S. Ong. “Determination Of An
Optimal Beacon Period And Listen Intervals For Power
Saving Mode In Wi-Fi Communication,” presented at
8-10, 2012.
37 Issa Ahmed Abed, S. P. Koh, Khairul Salleh Mohamed
Sahari, S. K. Tiong & D. F. W. Yap. “Using ElectromagnetismLike Algorithm in Solving Inverse Kinematics Problem,”
(NatGrad2012), 2012.
119
38 J. Luis, Lariyah Mohd Sidek, Mohamed Nor Mohamed
Desa & P. Y. Julien. “Challenge In Running Hydropower
As Source Of Clean Energy: Ringlet Reservoir, Cameron
Highlands Case Study,” presented at the National Graduate
Conference 2012 (NatGrad2012), 2012.
39 J. Paber & C. C. Lai. “Hardware implementation of Reed
Solomon (RS) Error Correction Code for IEEE 802.15.4
Wireless Sensor Network,” presented at National Graduate
40 K. C. Foo, Sarveswaren Karunanithi & G. Thio. “New
Generation Pole Light,” presented at 4th International
Conference On Energy And Environment, 2013.
41 K. H. Oon, C. H. Goh, Chandan Kumar Chakrabarty & T.
H. Goh. “Generalized Equivalent Circuit Model For Ultra
Wideband Antenna Structure With Double Steps For Energy
Scavenging,” presented at 4th International Conference
On Energy And Environment, 2013.
42 K. Poornima & M. N. M. Ansari. “Design Analysis Of MultiCavity Plastic Injection Moulding,” presented at National
2012.
43 Kamal Nasharuddin Mustapha, Salmia Beddu, Zakaria Che
Muda & Rasyikin Roslan. “Forensic Engineering: Learning
From Disasters,” presented at The 12th International
Convention Of Melaka Twin Cities 2012, Melaka, Apr. 1011, 2012.
44 Khaled Saleh Banawair, Jagadeesh Pasupuleti & Mehrdad
Tahmasebi. “The Feasibility Studies of Wind Generation
Potential in Malaysia,” presented at National Graduate
45 L. H. Khoo, Nor Shafika Mashuri, Anis Aridah Abd Razak &
B. K. Yap. “Silver Plated Copper Filler Die Attach Adhesive
Characterization On Lqfp Package For Automotive Device
Application,” presented at South East Asia Technical
Conference On Electronics Assembly Technologies, 2012.
46 Lariyah M. S., Faizah C. R., Mohd Noh, A., Rahsidi S. M., Azwin
Zailti, A. R., Mohd Nor, M.D., Hidayah B. & Intan Shafilah A.
A. “Development of Probable Maximum Flood (PMF) for
Sultan Abu Bakar Dam,” presented at the 5th Engineering
Conference (ENCON) 2012, Kuching, July 10-12, 2012.
47 Lariyah M. S. & Norshafa Elyza M. “Constructed Rain Garden
For Water Sensitive Urban Design (Wsud) As Stormwater
Management In Malaysia: A Literature Review,” presented
at the National Graduate Conference 2012 (NatGrad2012),
2012.
48 M. A. Ahmed, M. Z. Yusoff & N. H. Shuaib. “Numerical
Investigation On The Nano-Fluid Flow And Heat Transfer
In A Wavy Channel,” presented at The International
Conference On Advanced Computational Engineering And
Experimenting 2012 (ACEX2012), Istanbul, 2012.
49 M. A. Salim, H. Misran, S. Z. Othman, N. N. H. Shah & N. A.
A. Razak. “Modified Sol-Gel Technique For The Preparation
Of Copper Nanoshell On Monodispersed Silica Spheres,”
(NatGrad2012), 2012.
50 M. A. Salim, H. Misran, S. Z. Othman, N. N. H. Shah & N. A.
A. Razak. “Synthesis And Characterizations Of Si-Cu CoreShell Nanocomposite Using Renewable Template Fatty
Alcohols,” presented at the 21st Scientific Conference of
the Microscopy Society Malaysia (MSM), 2012.
51 M. F. Abdul Jalal, N.H. Shuaib, P. Gunnasegaran & E.
Sandhita. “Investigation on the cooling performance of
120
a compact heat exchanger using nanofluids,” presented
at International Conference on Nanotechnology-Research
and Commercialization, 2012.
52 M. M. Rahman & A. M. Nor. “Effect Of Feedstock Preparation
To The Green Properties Of Warm Formed Iron Powder
Compacts,” presented at Advanced Materials Conference
2012, Langkawi, Dec. 12-13, 2012.
53 M. M. Rahman & S. S. M. Nor. “Sintering Schedule For
Near-Net Shape Manufacturing Through Warm Forming
Route,” presented at Advanced Materials Conference 2012,
Langkawi, Dec. 12-13, 2012.
54 M. Reyasudin Basir Khan, Razali Jidin, Sharifah Azwa Shaaya
& Dzesmillson Daryll. “Wireless PV Module Performance
Monitoring System,” presented at National Graduate
55 M. Reyasudin Basir Khan, Razali Jidin, Sharifah Azwa
Shaaya & M. Hanif Amir Sultan. “Solar Tracking System
Utilizing Pyranometer for Optimal Photovoltaic Module
Positioning” presented at National Graduate Conference
2012 (NatGrad2012), Nov. 8-10, 2012.
56 M. S. Bahrudin, S.F. Abdullah & I. Ahmad. “Fabrication Of
Solar Cell Using Tcad Software With Taguchi Optimization,”
(NatGrad2012), Nov. 8-10, 2012.
57
M. Z. Wahab & A. Mohd Ariffin, “Ultrasonic Detection
As A Condition-Based Maintenance Technique To Assess
The Performance Of Medium Voltage Overhead Lines,”
(NatGrad2012), Nov. 8-10, 2012.
58 Mashkuri Yaacob, P. Y. Chong & Bahisham Yunus. The
Balancing Act: Quality Versus Bottom-Line Of Private
Higher Education In Malaysia. Paper presented at the
Post Secondary and Higher Education Leaders’ Forum
(P2HELF) 2012, University of Mauritius, Réduit, August
27-30, 2012.
59 Mehrdad Tahmasebi & Jagadeesh Pasupuleti. “Wind
Power Generation Integrated By Direct Load Control As
A Virtual Power Plant,” presented at National Graduate
60 Moaz H. Ali, Bashir Mohamed, M. N. M. Ansari & Basim A.
Khidhir. “Finite Element Modeling Prediction The Effect Of
Nose Radius On The Equivalent Strain (PEEQ) For Titanium
(Ti-6Al-4V) Alloy,” presented at Nanotech 2012, Santa
Clara, CA, 2012.
61 Mohammed Fadhil Mahmood & Noor Shamsiah Othman.
“Performance of Coded CDMA Cooperative Communication
System,” presented at National Graduate Conference 2012
(NatGrad2012), Nov. 8-10, 2012.
62 Mohammed Reyasudin Basir Khan, Razali Jidin, Jagadeesh
Pasupuleti & Sharifah Azwa Shaaya. “Building Automation:
Photovoltaic Assisted Thermal Comfort Management
System For Energy Saving,” presented at 4th International
Conference On Energy And Environment, 2013.
63 Mohd Najib Hamsan & Adlansyah Abd Rahman.
“Improvement And Modification On The Cyclone
Combustor Rig For Coal-Biomass Co-Firing Experiment,”
(NatGrad2012), 2012.
64 Mohd Nazmi Ahmad, Lariyah Mohd Sidek, A. Selamat
& Roseli Zainal Abidin. “The Relationship Of Localized
Rainfall Versus Urban Heat Island (UHI) Parameters And Air
Pollution,” presented at the 2nd International Conference
on Water Resources 2012.
77
65 Muhamad Mansor & Nasrudin Abd. Rahim. “New Voltage Sag
Detection For Pwm-Switch Autotransformer,” presented
at Power Energy Conversion Symposium, 2012.
66
Musaab Sami Ismail & Noor Shamsiah Othman.
“Performance Analysis Different Channel Code Rats in
Wireless Cooperative Communication,” presented at
8-10, 2012.
67 Mushreq Abdulhussain Shuriji & H. S. Ong. “A Comparative
Study Of Wireless Communication Wireless Technologies:
Binary-Cdma Versus Ieee802.11 And Zigbee,” presented
at National Graduate Conference 2012 (NatGrad2012),
Nov. 8-10, 2012.
68 N. A. A. Razak, H. Misran, N. N. H. Shah, M. A. Salim &
S. Z. Othman. “Combustion Synthesis Of Zinc Oxide
Nanoparticles,” presented at the National Graduate
Conference 2012 (NatGrad2012), 2012.
69 N. A. Hamid, M. S. N. Asbullah, S. Y. S. Yahya & A. Hashim.
“Relationship Between Characteristic Length And Average
Grain Size In Nanosize Mgo Added Bi-2212 Superconductor
Ceramics,” presented at 2012 The 2nd International
Conference On Fundamental And Applied Sciences, 2012.
70 N. N. H. Shah, H. Misran, N. A. A. Razak, M. A. Salim & S.
Z. Othman. “ZnO Nanoparticles Prepared By Modified
Combustion Synthesis,” presented at the National Graduate
Conference 2012 (NatGrad2012), Nov 8-10, 2012.
71 N. N. H. Shah, H. Misran, N. A. A. Razak, M. A. Salim &
S. Z. Othman. “Modified Combustion Synthesis Of
Nanocrystalline Zinc Oxide,” presented at the 21st
Scientific Conference of the Microscopy Society Malaysia
(MSM), 2012.
72 N. A. Mohd Noor, L., Mohd Sidek, S. Beecham, M.R. Zainal
Abidin, A.,Ab Ghani & N.A.,Zakaria. “Performance Evaluation
Of Constructed Wetland Under Tropical Climate: An
Experience At Humid Tropic Centre And Universiti Sains
Malaysia Engineering Campus,” presented at the 13th
International Conference on Wetland Systems for Water
Pollution Control, 2012.
73 N. A. Mohd Noor, Lariyah Mohd Sidek, S. Beecham, M. R.
Zainal Abidin & A. Ab Ghani. “Performance Of Constructed
Wetland Under Tropical Climate: A Case Study Humid
Tropic Centre Constructed Wetland,” presented at the
2nd International Conference on Water Resources 2012.
74 Nasri A. Hamid, Yusof Abdullah & Mohd Shahrul
Nizam Asbullah. “Effects Of Electron Irradiation
On Superconducting Properties Of Bi-2212/Mgo
Superconductor Composite,” presented at Nuclear Science,
Technology & Engineering Conference 2012 (NUSTEC2012),
2012.
75 Noor Azrina Talik, C. S. Foong, B. K. Yap & C. Y. Tan. “Flux
Cleaning Process For Ceramic Flip Chip Ball Grid Array
(Fccbga),” presented at South East Asia Technical Conference
On Electronics Assembly Technologies, 2012.
76 Noor Azrina Talik, C. S. Foong, B.K. Yap & C. Y. Tan. “Flux
Residue Cleaning Process Optimization For Flip Chip Ball
Grid Array (FCBGA),” presented at Joint Conference Of
“International Conference On Electronics Packaging” And
“Imaps All Asia Conference”, Tokyo, 2012.
Noora Salim Alwan, Shanjeevan Jayavalan, Aiman Ismail,
Hafizal Mohamad, Norashidah. M. Din, Norazizah Mohd
Aripin, Haider Jabber, Aimi Farid Rusdin & Mezher H. M.
“Malaysia Spectrum Survey Measurement and Analysis of
the Occupancy for GSM900 Band,” presented at National
2012.
78 Nor Hazwani Binti Nor Khalid, Rohayu Che Omar, Fathoni
Usman, Intan Nor Zuliana Binti Baharuddin & Azwin Zailti
Abdul Razad. “Transmission Tower Classification Based On
Landslide Risk Map Generated By Geographical Information
System (Gis) At Cameron Highlands,” presented at 4th
International Conference On Energy And Environment,
2013.
79 Norashidah Md Din, Rohayu Che Omar, Naoki Sakai, Md
Zaini Jamaludin, Aiman Ismail, Mohd Zafri Baharuddin,
Nor Hazwani Nor Khalid, Fairuz Abdullah & Salman
Yussof. “Early Warning System For Monitoring Landslide
Hazard Of Transmission Towers In Malaysia,” presented
at Awam International Conferences On Civil Engineering
’12 (Aicce’12) And Geohazard Information Zonation ’12
(Giz ’12), Penang, 2012.
80 Normy N. Razak, J. Lin, J. Wong & G. J. Chase. “Monte Carlo
Analysis Of A Subcutaneous Absorption Insulin Glargine
Model: Variability In Plasma Insulin Concentrations,”
presented at the International Conference On Biomedical
Engineering And Technology ICBET2012.
81 Nur Asfahani Ismail & H. S. Ong. “Modeling Power
Consumption Of A Heterogeneous Cluster,” presented at
8-10, 2012.
82 Nur Badariah Ahmad Mustafa, Farah Hani Nordin,
Fakaruddin Ali Ahmad Ismail, Ammar Ahmed Alkahtani,
Nagaletchumi Balasubramaniam, C. H. Goh & Zainul
Abidin Md Sharrif. “Electrical Field Of Electrical Appliances
Versus Distance: A Preliminary Analysis,” presented at
4th International Conference On Energy And Environment,
2013.
83 Nur Shahida Roslin, Adzly Anuar & Khairul Salleh Mohamed
Sahari. “Simulation of Wheel-based Type Robot for
Inspecting Pipe using Webots,” presented at National
2012.
84 Nguyet Quang, Ong Hang See, Dao Viet Nga, L. C. Lai,
Y. X. Chee & Shashiteran Karuppiah. “Traffic Generator
for Smart Grid Communication Network,” presented at
8-10, 2012.
85 S. E. S. Bariran, B. Yunus & S. Daud. “Simulation And
Analysis Of Bullwhip Effect In Beer Game Supply Chain,”
(NatGrad2012), 2012.
86
S. M. H. Ahmer, M. S. Bahrudin & S. F. Abdullah, L. S. Jan.
“A Quantitative Analysis Of The Wear Of Aluminum In The
Presence Of Polytron Additive In The Helix Lubricant,”
(NatGrad2012), Nov. 8-10, 2012.
87 S. Naganathan, K. M. Nasharuddin & A. Ahmed Shakir.
“Performance Of Recycled Concrete Fines As Fine
Aggregate Replacement In Cement Mortar,” presented
at 11th International Conference on Concrete Engineering
and Technology 2012, 2012.
121
88 S. Thiruchelvam, J. E. Tookey, D. A. S. Samarasinghe, K.N.
Mustapha & K. Kadirgama. “How Power Utility Engineers
Can Better Select Equipment Suppliers? The Malaysian
Case,” presented at The Fourth Annual American Business
Research Conference, New York, 2012.
89 S. Thiruchelvam, J.E. Tookey & K.N. Mustapha.
“Sustainability Of A National Power Utility: A Way Forward,”
presented at Meeting Of The Fourth Annual American
Business Research Conference, New York, 2012.
90 S. Z. Othman, H. Misran, A. M. Aminuddin, M. A. Salim, N. N.
H. Shah & N. A. A. Razak. “Syntheses And Characterizations
Of Mof-5 Materials By Non-Surfactant Templating Method
For Ammonia Gas Storage,” presented at the 21st Scientific
Conference of the Microscopy Society Malaysia (MSM),
2012.
91 Saif F. Mahmood & K. S. Yap. “Tuning Of Fuzzy Controller
For Antenna Tracking Satellite Using Genetic Algorithm,”
(NatGrad2012), Nov 8-10, 2012.
91 Salmia B., Shafiq N., Nuruddin M. F., Kamal N. M., Lariyah
M. S., Hidayah B., Shuhairy, N. & Herda Yati K. “Used
Engine Oil as a Green Concrete Admixtures,” presented
at 5th Engineering Conference (EnCon 2012), Kuching,
Sarawak, 2012.
92 Seyed Esmail Seyedi Bariran & Khairul Salleh Mohamed
Sahari. “A Novel Mass Customization Model For MultiStage Asynchronous Flexible Manufacturing Systems With
Parallel Degrading Machinery,” presented at National
2012.
93
Seyed Esmail Seyedi Bariran & M. N. M. Ansari. “Novel BioComposites of Ti/HA and PA6/HA for Medical Applications:
Comapritive Review and Analysis,” presented at National
2012.
94 Shahida Begum & Kumaran Palanisamy. “Use Of Oil Palm
Waste As A Renewable Energy Source And Its Impact
On Reduction Of Air Pollution In Context Of Malaysia,”
Environment, 2013.
95 Shahida Begum. “Energy Efficiency Of Biogas Produced
From Different Biomass Sources,” presented at 4th
International Conference On Energy And Environment,
2013.
96 Sharifah Suhaila Syed Othman, C. H. Goh, Farah Hani
Nordin, Nur Badariah Ahmad Mustaf & Zainul Abidin Md
Sharrif. “Detection Of Vlf And Lf Emissions Of Fluorescent
Light For Efficient Management Of Power Consumption,”
Environment, 2013.
97
Shivan Ismael Abdullah, M. N. M. Ansari, L. W. Fei & N. M.
Huang. “Mechanical Properties Of Graphene Oxide/Epoxy
Composite,” presented at National Graduate Conference
2012 (NatGrad2012), Nov. 8-10, 2012.
98 Shuhairy Norhisham, Lariyah Mohd Sidek, Salmia Beddu,
Fathoni Usman, Hidayah Basri & Herdayati Katman.
“Awareness And Level Of Usage For Park And Ride Facilities
In Putrajaya, Malaysia,” presented at 5th Engineering
Conference (EnCon 2012), Kuching, Sarawak, 2012.
99
122
Sreedhar Kalavagunta, Sivakumar Naganathan & Kamal
Nasharuddin Mustapha. “Advances in CFRP Strengthened
Steel Structures,” presented at National Graduate
100 Sreedhar Kalavagunta, Sivakumar Naganathan &
Kamal Nasharuddin Mustapha. “Cold Formed Steel In
Construction– Review Of Research, Challenges And
Opportunities,” presented at First Australasia And
South East Asia Conference In Structural Engineering And
Construction, 2012.
101 Sreedhar Kalavagunta, Sivakumar Naganathan & Kamal
Nasharuddin Mustapha. “Bonding Material Advances In
Carbon Fibre Reinforced Plastics (CFRP),” presented at
National Conference On Nanomaterials, Dec. 3-4, 2012.
102 Syakirah W. Abdullah, Aishah M. Isa & Miszaina Osman.
“Solar Power Photovoltaic (PV) Potential In Reducing
The Peak Demand In The State Of Selangor In Peninsular
Malaysia,” presented at 19th Conference Of The Electric
Power Supply Industry (CEPSI 2012), Oct. 15-19, 2012.
103 T. Z. Tai & H. S. Ong. “Thermal Model for Harvesting Waste
Heat From Microprocessor Using Shunt Configuration,”
presented at The International Conference On Production,
Energy And Reliability (ICPER2012), 2012.
104 T. S. Gaaz, M. N. M. Ansari Robert A. Shanks & I. Kong.
“Mechanical and dynamic visco-elastic properties of
halloysite nanotube (HNT)-polyurethane (PU) composites,”
(NatGrad2012), Nov. 8-10, 2012.
105 Tuan Ab Rashid Tuan Abdullah. “Maximizing The Facilities’
Life Span Through Proper Asset Management Strategies,”
presented at the 2nd Annual Power Plant Operations &
Maintenance, Kuala Lumpur, May 8-9, 2012.
106 B. K. Yap, C. H. Tan, Agileswari & C. Lo. “Reliability Study On
The Polymer Core Solder Balls Under Multiple Reflow And
Hts Stress Tests,” presented at South East Asia Technical
Conference On Electronics Assembly Technologies, 2012.
107 Yassin Mustafa Ahmed, Khairul Salleh Mohamed Sahari
& M. Ishak. “Welding of Titanium (Ti-6Al-4V) Alloys: A
Review,” presented at National Graduate Conference 2012
(NatGrad2012), Nov. 8-10, 2012.
108 Zarrin Kothandapani, Shahida Begum, M. A. M. Nainar
& S.Gholizadeh. “Effect of Tungsten Oxide and Bismuth
Oxide on Titanium Dioxide based varistor,” presented at
8-10, 2012.
109 Zulhilmi Ramli, Tuan Ab Rashid Tuan Abdullah, Azni Wati
Azizan & Tengku Izzudin Tengku Ismail. “Lightning Study
For 132 kV BJLL-SRDG In TNB Transmission System,”
(NatGrad2012), 2012.
Books
1
Endang Jati Mat Sahid, Adnan A. Hezri, Shahnaz Sharifuddin
& Y. P. Leong. “Transition To Sustainability: Energy Demand
And Supply In Malaysia,” in Towards A Green Economy:
In Search Of Sustainable Energy Policies For The Future.
Singapore: Konrad Adenauer Stiftung, 2012, pp. 85 – 102.
2
Hasril Hasini, Mohd. Zamri Yusoff & Norhazwani Abd.
Malek. “Numerical Modeling Of Wet Steam Flow In Steam
Turbine Channel,” in Tech Publishing, 2012, pp. 443-462.
3
Hasril Hasini, Mohd. Zamri Yusoff & Norhazwani Abd.
Malek. “Numerical Modeling Of Wet Steam Flow,” in
Steam Turbine Channel. Gokcek, M., Ed. InTech, 2012, pp.
443-462.
4
Lariyah Mohd Sidek & Hidayah Basri. Study On Effectiveness
Of Stormwater Quality Devices At Putrajaya. 2012.
5
Lariyah Mohd Sidek, Hidayah Basri, Faizah Che Ros,
Abdullah Kormain & Isham Abdul Karim. Hydraulic Model
Study For Jeniang Transfer Scheme And Naok Reservoir,
Kedah. 2012.
6
Lariyah Mohd Sidek, Hidayah Basri, Faizah Che Ros, M.
N. Nasir & Chandrika Mohd Jayothisa. “Development Of
Gross Pollutant Traps Decision Support System For River
Rehabilitation,” in Development Of Gross Pollutant Traps
Decision Support System For River Rehabilitation. 2012.
7
Lariyah Mohd Sidek, Hidayah Basri, Faizah Che Ros, M.
N. Nasir & Chandrika Mohd Jayothisa. Assessment Of
Stormwater Gross Pollutant Treatment Technology To
Enhance Water Quality In The Urban Area. 2012.
8
Lariyah Mohd Sidek, Zulkefli Mustaffa & Roseli Zainal
Abidin. Stormwater Quantity And Quality Modeling For
Flood Hazard Assessment In Johor. 2012.
9
M. George, Kartik Basu & Jagadeesh Pasupuleti. Analysis
Of Three-Phase Instantaneous Power Using MATLAB/PSB.
Deutschland: Lambert Academic Publishing, 2012.
5
Nur Mazlini Razali, Kumaran Palanisamy, Bahisham
Yunus & M. Nazrain. “WCO Biodiesel Test Bed Program,”
presented at Pemandu Steering Committee Meeting, 2012.
6
P.Susthitha Menon, S.Kalthom Tasirin, Ibrahim Ahmad
& Siti Fazlili Abdullah. “High Speed Sige/Si Mqm
Soi-Based Lateral Pin Photodiode,” presented at The
3rd Isesco International Workshop And Conference On
Nanothechnology 2012 (Iwcn2012).
7
Tuan Ab Rashid Tuan Abdullah. “Green Calculator In
Sustainable Mobility,” presented at Automotive Safety
Week 2012, Southeast Asia, 2012.
8
Tuan Ab Rashid Tuan Abdullah. “Maximizing The Facilities’
Life Span Through Proper Asset Management Strategies,”
presented at 2nd Annual Power Plant Operations &
Maintenance, Kuala Lumpur, May 8-9, 2012.
10 Moleykutty George, Kartik Basu, Jagadeesh Pasupuleti.
(Jul 2012) Analysis Of Three-Phase Instantaneous Power
Using MATLAB/PSB.
11 P. Gunnasegaran, N.H. Shuaib, H.A. Mohammed, M.F.
Abdul Jalal & E. Sandhita. “Heat Transfer Enhancement
In Microchannel Heat Sink Using Nanofluids,” in Fluid
Dynamics, Computational Modeling And Applications.
Juarez, L. H., Ed. Rijieka: InTech, 2012, pp. 287-326.
12 Razali Jidin. “Programmable Embedded Systems On
FPGA: Hardware & Software Primers,” in Programmable
Embedded Systems On Fpga: Hardware & Software Primers.
Adnan A. Hezri & Wilhelm Hofmeister, Eds. 2012, pp. 413.
2012, Ch. 1-11.
13 Razali Jidin. Programmable Embedded Systems On FPGA:
Hardware & Software Primers, 1st ed. 2012, ch. 1-11.
14 Sivakumar Naganathan & Hashim Abdul Razak. Controlled
Low-Strength Material Using Bottom Ash And Quarry Dust:
Engineering And Leaching Properties. Deutschland: Lambert
Academic Publishing, 2012.
15 Sivakumar Naganathan. Learn Yourself Staad.Pro V8i.
Structural Analysis And Design Using Staad.Pro V8i.
Deutschland: Lambert Academic Publishing, 2012.
Others
1
Abd Halim Shamsuddin & Kumaran Palanisamy.
“Harnessing Renewable Energy From Biosolids And
Bioeffluent At Sewage Treatment Plant,” presented at
Aachen- Glamorgan-Leed Research Symposium, 2012.
2
M. N. Mohamed Desa & N. S. Ismail. “Report Of Flood
Forecasting And Warning System In Australia,” published
in 2012 by the Centre for Stormwater and Geohazard
Management (CSGM) UNITEN, Jun. 2012.
3
Mohd Aminur Rashid Mohd Amiruddin Arumugam.
“Modeling The Effects Of Infiltration Within Hexagonal
Modular Permeable Pavements Using Flow-3D,” in Flow3D News: Winter 2013 - Application Note, 2013.
4
N. T. M. Lin. “Technical Talk - A Green Energy System,” in
IET Malaysia Local Network Newsletter (Quarterly), pp. 9,
Apr. 2012.
123
Journals
1
2
3
A. H. Altalhi, M. S. B. M. Azmi, A. M. Al-Kharasani & S. A.
Ali. “A Modified Packet Marking Algorithm To Improve
Bandwidth Fairness In Diffserv Networks.” Research Journal
Of Information Technology, vol. 4, (1), p. 1, Jan. 2012.
Abdulrahman H. Altalhi, Zailani Mohamed Sidek, Labeeb
Mohsin Abdullah & Muhammad Sufyian Mohd Azmi.
“Challenges and Requirements of Digital Forensics
Investigation in Wireless Ad-hoc Networks.” International
Journal Of Advanced Research In Computer Science, vol. 3,
(1), pp. 26-30, Feb. 2012.
Abm Tariqul Islam, Hajar Binti Mat Jani & Adibah Shuib.
“Web-Based System For Software Requirements Quality
Analysis Using Case-Based Reasoning And Neural Network.”
Journal Of Computer Engineering (Iosr-Jce), vol. 10, (3), pp.
78-82, Apr. 2013.
Journal Of Computing & Organisational Dynamics Double
Blind Peer Reviewed Open Access Journal, vol. 1, (1), pp.
1-7, Feb. 2013.
14 Hajar Mat Jani. “Modeling Total Quality Management
in Higher Education with Case-Based Reasoning.” JNIT:
Journal Of Next Generation Information Technology, vol.
3, (3), pp. 99-109, Aug. 2012.
15 Jameela Ali, Loay E. George & S. D. Chen. “A Review Of
Machine Learning Techniques And Statistical Models In
Anaemia.” International Journal Of Scientific & Technology
Research, vol. 2, (2), pp. 171-175, Feb. 2013.
16 Kairanbay Magzhan & Hajar Mat Jani. “A Review And
Evaluations Of Shortest Path Algorithms.” International
Journal Of Scientific & Technology Research (Ijstr), vol. 2,
(6), pp. 99-104, Jun. 2013.
4
Ahmaid R.Mohain & Marini Othman. “The Role Of
Discussion Forums In Developing E- Learning Community
Among Students And Instructors: Test In Univeristy Of
Baghdad - Iraq.” Elkixir Educational Journal.
17 Khudhair Abbas Mohammed, Mohd Sharifuddin Ahmad,
Salama A. Mostafa & M. A. Firdaus M. Sharifuddin. “A Nodal
Approach to Modeling Human-Agents Collaboration.”
International Journal Of Computer Applications, vol. 43,
(12), pp. 33-40, Apr. 2012.
5
Ali Makhmali & Hajar Mat Jani. “Comparative Study On
Encryption Algorithms And Proposing A Data Management
Structure.” International Journal Of Scientific & Technology
Research (Ijstr), vol. 2, (6), pp. 42-48, Jun. 2013.
18 Majdi Beseiso, Abdul Rahim Ahmad & Roslan Ismail.
“A New Architecture for Email Knowledge Extraction.”
International Journal Of Web & Semantic Technology
(IJWEST), vol. 3, (3), pp. 1-10, Jul. 2012.
6
Aliza Abdul Latif & Nor Izzati Hanifi. “Analyzing It
Function Using Cobit 4.1 – A Case Study Of Malaysian
Private University.” Journal Of Economics, Business And
Management, vol. 1, (4), pp. 406-408, Jun. 2013.
19 Manjit Singh Sidhu. “Technology Assisted Approach For
Learning, Vizualizing And Problem Solving In Engineering.”
Journal Of Technics Technologies Education Management
– (Ttem), vol. 8, (1), pp. 277-292, Apr. 2013.
7
Azhana Ahmad, Aida Mustapha, Mohd. Sharifuddin Ahmad
& Mohd. Zaliman M. Yusoff. “Analyzing The Principles
Of Islamic Jurisprudence For A Normative Framework In
Multi-Agent System.” International Journal Of Quranic
Research, vol. 1, (1), pp. 51-72, Apr. 2012.
20 Methaq Jasam & Salman Yussof. “Evaluation Of Energy
Efficiency Of Manet Routing Protocols.” International
Journal Of Scientific & Technology Research, vol. 2, (3),
pp. 207-211, Mar. 2013.
8
Azlan Iqbal, H.van der Heijden, M. Guid & Ali Makhmali.
“Evaluating The Aesthetics Of Endgame Studies: A
Computational Model Of Human Aesthetic Perception.”
IEEE Transactions On Computational Intelligence And AI
In Games: Special Issue On Computational Aesthetics In
Games, vol. 4, (3), pp. 178-191. , Sep. 2012.
9
Badariah Solemon, Shamsul Sahibuddin & Abdul Azim
Abdul Ghani. “A New Maturity Model for Requirements
Engineering Process: An Overview.” Journal Of Software
Engineering And Applications, vol. 5, (5), pp. 340-350, May
2012. doi: 10.4236/jsea.2012.55040
10 Boshra Talebi Haghighi, Marini Othman & Faridah Hanim
Hashim. “Towards a Better Way to Evaluate Internet Usage.”
Jdcta: International Journal Of Digital Content Technology
And Its Applications, vol. 6, (3), pp. 262-270, Mar, 2012.
11 C. H. Tan, K. S. Yap & H. J. Yap. “Application of genetic
algorithm for fuzzy rules optimization on semi expert
judgment automation using Pittsburg approach.” Applied
Soft Computing, vol. 12, (8), pp. 2168-2177, Aug. 2012.
12 C. H. Tan, K. S. Yap & H. J. Yap. “Application of genetic
algorithm for fuzzy rules optimization on semi expert
judgment automation using Pittsburg approach.” Applied
Soft Computing, vol. 12, no. 8, pp. 2168-2177, Aug. 2012.
13 Dhurgham Taha Ahmed & Marini Othman. “Perception
Study On Cloud Computing In Sme’S Baghdad ,Iraq.”
124
21 Moamin A Mahmoud, Mohd Sharifuddin Ahmad, Azhana
Ahmad, Aida Mustapha, Mohd Zaliman M. Yusof &
Nurzeatul Hamimah Abd Hamid. “Optimal Environmental
Simulation Settings To Observe Exceptional Events In
Social Agent Societies.” Journal Of Artificial Intelligence
(Jai), pp. 1-19, Mar. 2013.
22 Mohammad Salim & Marini Othman. “A Development of
an ISG Framework for Mosul’s Health Sector.” International
Journal Of Computer Science And Network (IJCSN), vol.
1, (3), Jun. 2012.
23 Mohammed Azlan Mohamed Iqbal. “Knowledge Discovery
In Chess Using An Aesthetics Approach.” Journal Of
Aesthetic Education, vol. 46, (1), pp. 73-90, Mar. 2012.
24 Nor’ashikin Ali, D. Whiddett, A. Tretiakov & I. Hunter.
“The Use Of Information Technologies For Knowledge
Sharing By Secondary Healthcare Organizations In New
Zealand.” International Journal Of Medical Informatics,
Feb. 2012, available: http://dx.doi.org/10.1016/j.
ijmedinf.2012.02.011
25 Norziana Binti Jamil, Ramlan Mahmod, Muhammad Reza
Z’aba, Nur Izura Udzir & Zuriati Ahmad Zukarnain. “Diffusion
And Statistical Analysis Of Stitch-256.” Journal Of Applied
Sciences, vol. 13, (5), pp. 673-682, Jun. 2013.
26 Norziana Jamil, Ramlan Mahmood, Muhammad Reza Z’aba,
Nur Izura Udzir & Zuriati Ahmad Zukarnaen. “STITCH-256:
A Dedicated Cryptographic Hash Function.” Journal Of
Applied Sciences, vol. 12, (15), pp. 1526-1536, Auq. 2012.
27 Nurzeatul Hamimah Abd Hamid, Azhana Ahmad, Mohd
Sharifuddin Ahmad, A. Y. C. Tang & Aida Mustapha. “AgentBased Simulation In A Normative Environment Using The
Epmp Domain.” Information Technology Journal, vol. 12,
(6), pp. 1213-1219, Apr. 2013.
40 Yusra A. Y. Al-Najjar & D. S. Chen. “Comparison of Image
Quality Assessment: PSNR, HVS, SSIM, UIQI.” International
Journal Of Scientific & Engineering Research, vol. 3, (8),
Aug. 2012.
28 Omar Ibrahim Obaid, Mohd Sharifuddin Ahmad, Salama
A. Mostafa & Mazin Abed Mohammed. “Comparing
Performance Of Genetic Algorithm With Varying Crossover
In Solving Examination Timetabling Problem.” Journal Of
Emerging Trends In Computing And Information Sciences,
vol. 3, (10), pp. 1427-1434, Oct. 2012.
Proceedings
1
29 Omar Zughoul, Hajar Mat Jani, Adibah Shuib & Osama
Almasri. “Privacy And Security In Online Examination
Systems.” Journal Of Computer Engineering (Iosr-Jce), vol.
10, (4), pp. 63-70, Apr. 2013.
A. Y. C. Tang & Sharifuddin M. Zain. “Supporting Model
Reuse In Organic Reaction Simulation: Towards The
Compositional Modelling Approach.” Journal Of Emerging
Trends In Computing And Information Sciences, vol. 3, (3),
pp. 302-309, Mar. 2012.
2
A. Manap, T. Okabe & K.Ogawa. “Analysis Of The Particle
Velocity Range For Deposition And The Optimum Velocity
Of Cold Sprayed Particles Using Smoothed Particle
Hydrodynamics Method,” in International Joint Workshop
On Energy And Reliability 2012 (Iwere’2012), vol. 1, pp.
18, Feb. 2012.
3
Ali K. M. Al-Qurabat, Marini Othman, Ammuthavali
Ramasamy. “An E-Procurement Framework Development
For Materials Acquisition At UNITEN Library,” presented
at Symposium On It Governance, Management And Audit,
2012.
4
Al-Mutazbellah Khamees Itaiwi, Mohd Sharifuddin
Ahmad, Nurzeatul Hamimah Abd Hamid, Nur Huda Jaafar.
“A Multi-agent Framework for Dynamic Task Assignment
and Delegation in Task Distribution,” in International
Conference On Computer And Information Sciences (ICCIS
2012), Jun. 2012.
5
Al-Najjar Yusra & S. D. Chen. “Image Quality and Naturalness
of Contrast Enhanced Images,” in COIT Technical Paper
Publication, vol. 1, (1), 2012.
6
Al-Shaki Osama Treef, Al-Omari Zuher Hamid & Mohd
Sharifuddin Ahmad. “Formulating Organizational
Knowledge Growth,” presented at Symposium On It
Governance, Management And Audit, 2012.
7
Asmidar Abu Bakar, Abdul Rahim Ahmad, Roslan Ismail
& Jamalul-Lail Abd Manan. “Subjective Trust Model For
Mobile Ad-Hoc Network In Emergency Environment,”
in 2012 IEEE Symposium On Wireless Technology And
Applications (ISWTA), 2012, pp. 310-315.
8
Azizah Suliman & Surizal Nazeri. “The Effectiveness Of
Teaching And Learning Programming Using Embedded
Systems,” in 5th International Conference On Information
Sciences And Interaction Science (ICIS2012), pp. 32-36,
Jun. 2012.
9
Azlan Iqbal & Aishah Rashid. “Intended Multiple
Interpretations,” in Proc. 4th Malaysian International
Conference On Academic Strategies In English Language
Teaching, 2012, pp. 97-101.
30 Osama Almasri, Hajar Mat Jani, Zaidah Ibrahim & Omar
Zughoul. “Improving Security Measures Of E-Learning
Database.” Journal Of Computer Engineering (Iosr-Jce),
vol. 10, (4), pp. 55-62, Apr. 2013.
31 Qasim Radam Mahmood & Marini Othman. “An Ict
Management Framework Development To Adopt Ums At
Diyala University.” Journal Of Computing & Organisational
Dynamics, vol. 1, (1), pp. 1-7, Jan. 2013.
32 Rasha Adnan Kather & Marini Othman. “Cobit Framework
As A Guideline Of Effective It Governance In Higher
Education: Areview.” International Journal Of Information
Technology Convergence And Services (Ijitcs), vol. 3, (1),
Apr. 2013, doi : 10.5121/ijitcs
33 Rozita Masri & Hajar Mat Jani. “Employing Artificial
Intelligence Techniques in Mental Health Diagnostic
Expert System.” ICCIS2012: International Conference On
Computer And Information Sciences, Jun. 2012.
34 S. D. Chen. “A new image quality measure for assessment
of histogram equalization-based contrast enhancement
techniques.” Elsevier Digital Signal Processing. [Online].
Apr. 2012. Available: http://dx.doi.org/10.1016/j.
dsp.2012.04.002
35 Salama A. Mostafa, Mohd Sharifuddin Ahmad, Mazin Abed
Mohammed & Omar Ibrahim Obaid. “Implementing an
Expert Diagnostic Assistance System for Car Failure and
Malfunction.” International Journal Of Computer Science
Issues, vol. 9, (2), pp. 1-7, Apr. 2012.
36 Salman Yussof & Rina Azlin Razali. “An Investigation on
the Effect of Migration Strategy on Parallel GA-Based
Shortest Path Routing Algorithm.” Communications And
Network, vol. 4, (2), pp. 93–100, May 2012.
37 Shahrizan Ismail, Mohd Sharifuddin Ahmad & Zainuddin
Hassan. “Social Intelligence In Personal Knowledge
Management Using Software Agents.” Journal Of Research
And Innovation In Information Systems (JISRI), vol. 1, pp.
1- 10, Aug. 2012.
38 Sharifah Mumtazah Syed Ahmad, Y. L. Loo, Rina Md.
Anwar & Masyura Ahmad Faudzi. “Analysis Of The Effects
And Relationship Of Perceived Handwritten Signature’s
Size, Graphical Complexity, And Legibility With Dynamic
Parameters For Forged And Genuine Samples.” Journal Of
Forensic Sciences, vol. 58, (3), pp. 724-731, May 2013.
39 Waleed Fayiz Maqableh & Manjit Singh Sidhu. “Preliminary
Evaluation Of Using Augmented Reality As A Dynamic
Simulation Learning Tool For Linkage Mechanisms.”
International Journal Of Computer Applications (IJCA)
2012, vol. 58, (4), Nov. 2012.
10 Azman Yasin, Shamsan Gaber, Mazni Omar, Haslina Mohd,
Fauziah Baharom & Marina Md Din. “Designing Story
Card in Extreme Programming Using Machine Learning
Technique,” in Knowledge Management International
Conference (KMICE 2012), pp. 742-746, Jul. 2012.
11 Badariah Solemon, Izyana Ariffin, Marina Bte Md. Din
& Rina Md. Anwar. “A Study Of Learning Style And Its
Influence On Students’ Performance In Statistics Course:
A Case Study Of Uniten It Students,” in International
Conference On Teaching And Learning Education 2013
(Ictle’13), vol. 1, 2013, pp. 158-163.
125
12 Badariah Solemon. “Evaluation Criteria For Requirements
Engineering Process Improvement Models And
Frameworks,” in 15th International Conference On
Mathematical And Computational Methods In Science And
Engineering (Macmese’13), 2013, pp. 15-20.
13 Bamgboje Adeola Esther & Mohd Sharifuddin Ahmad.
“Culture: An Indispensable Influence On Knowledge
Management (Nigeria As A Case Study),” presented at
Symposium On It Governance, Management And Audit,
2012.
14 Boshra Talebi Haghighi, Marini Othman, Faridah Hanim
Hashim. “Internet Addiction and Dependency: A Case
Study in UNITEN, Malaysia,” International Conference On
Information Technology And Multimedia (ICIM2012), Jul.
2012.
15 Dua’ A. Nassar, Hasniza Yahya & Marini Othman. “A study
on the challenges of governing Jordan public health care:
A case study in HAKEEM implementation,” in Symposium
On It Governance, Management & Audit (Sigma2012), 2012,
pp. 1-4.
16 Eze Manzura Mohd Mahidin & Siti Salwa Ismail. “The
Potential of Integrating Multimedia Annotation in
Courseware Design for Dyslexic Children,” COIT Technical
Paper Publication, vol. 1, (1), Aug. 2012.
17 Fahad Layth Malallah, Sharifah Mumtazah Syed Ahmad,
Wan Azizun Wan Adnan, Vahab Iranmanesh & Salman
Yussof. “Understanding User Expectations Of Online
Heritage Sites,” in International Conference On Computer
Science And Computational Mathematics (Iccscm 2013),
2013, pp. 43-50.
18 Hajar Mat Jani & ABM Tariqul Islam. “A Framework Of
Software Requirements Quality Analysis System Using
Case-Based Reasoning And Neural Network,” in NISS2012:
2012 6th International Conference On New Trends In
Information Science And Service Science, pp. 151-156,
Oct. 2012.
19 Hasan Thabit Rashid & S. D. Chen, “A New Image Quality
Metric for Evaluation of Histogram Equalization-based
Contrast Enhancement Techniques,” COIT Technical Paper
Publication, vol. 1, 1, 2012.
20 Izyana Ariffin, Badariah Solemon, Marina Md. Din & Ina
Md. Anwar. “A Study Of Learning Style And Its Influence
On Students’ Performance In Statistics Course: A Case
Study Of Uniten It Students,” in International Conference
On Teaching And Learning Education 2013 (Ictle’13), vol.
1, 2013, pp. 158-163.
21 Jaspaljeet Singh Dhillion, C. Lutteroth & B. C. Wünsche.
“Leveraging Web 2.0 and Consumer Devices for Improving
Elderlies’ Health,” in Proc. Australasian Workshop On
Health Informatics And Knowledge Management (HIKM
2012), 2012, pp. 17-24.
22 Jaspaljeet Singh Dhillon, C. Ramos, B. C. Wünsche & C.
Lutteroth. “Leveraging Consumer Sensing Devices For
Telehealth,” presented at The 24th International Symposium
On Computer-Based Medical Systems (CBMS2011), 2012.
23 Jaspaljeet Singh Dhillon, C. Ramos, B. C. Wünsche &
C. Lutteroth. “Evaluation of Web 2.0 Technologies for
Developing Online Telehealth Systems,” presented at
The Australasian Workshop On Health Informatics And
Knowledge Management (HIKM 2012), 2012.
24 Jaspaljeet Singh Dhillon, J. S. Ramos, B. C. Wunsche & C.
Lotteroth. “Designing A Web-Based Telehealth System
126
For Elderly People: An Interview Study In New Zealand,”
presented at The 24th International Symposium On
Computer-Based Medical Systems (CBMS2011), 2012.
25 F. C. Lim & W. Y. Haw. “The Effectiveness Of Using Role
Play In Conducting Programming Classes,” in International
(Ictle’13), Melaka, 2013, pp. 599-605.
26 K. C. Lim, S. D. Chen, Ridha Omar & Manjit Singh Sidhu,
“Comparative Evaluation of Performance Metrics Over
Self-reported Metrics in Measuring Users’ Prior Computer
Experiences in pre-GUI Experiments,” COIT Technical Paper
Publication, vol. 1, (1), 2012.
27 K. C. Lim, Nur Maisarah Shahril Khuzairi, Azah Mastura Ismail
& Muhammad Nasrul Ersal. “Efficiency Evaluation Design
Measuring Competency Evaluation System Augmented
with Automated Data Distribution Algorithm,” COIT
Technical Paper Publication, vol. 1, (1), 2012.
28 M. N. Arib Rejab, A. R. Roslan, R. I. Raja Hamzah, J. I. InayatHussain, A. Nazirah & I Asyraf. “Experimental Methods To
Determine Noise In Compartment And Acceleration On
Both Sides Of Elastomeric Powertrain Mount Of Passenger
Car,” in Proceedings Of The 6Th South East Asian Technical
University Consortium (Seatuc) Symposium, pp. 158, Mar.
2012.
29 Mazin Abed Mohammed, Mohd Sharifuddin Ahmad
& Salama A. Mostafa. “Using Genetic Algorithm in
Implementing Capacitated Vehicle Routing Problem,” in
International Conference On Computer And Information
Sciences (ICCIS 2012), Jun. 2012.
30 Moamin A. Mahmoud, Mohd Sharifuddin Ahmad, Azhana
Ahmad, Mohd Zaliman Mohd Yusoff & Aida Mustapha. “A
Norms Mining Approach to Norms Detection in Multi-agent
Systems,” in International Conference On Computer And
Information Sciences (ICCIS 2012), Jun. 2012.
31 Mohammad Salim, Hasniza Yahya & Marini Othman.
“An Investigation of ISG Status in Mosul Health Sector,”
in Symposium On It Governance, Management & Audit
(Sigma2012), 2012, pp. 1-5.
32 Mohammed Joudah Zaiter, Salman Yussof, Abid
Abdelouhahab, C. L. Cheah & Adnan Saher. “On The Energy
Consumption In Optical Burst Switching (OBS) Networks,”
in IEEE Symposium On Computer Applications & Industrial
Electronics, pp. 226-229, Dec. 2012.
33 Mohana Shanmugan & Saraswathy Shamini Gunasekaran.
“An Overview Of The Social Network Analysis Visualization
Of Facebook,” in Symposium On It Governance, Management
& Audit (Sigma2012), 2012, pp. 1-4.
34 Mohana Shanmugan & Saraswathy Shamini Gunasekaran.
“Investigation on the effectiveness of learning musical
concepts through interactive multimedia piano
courseware,” in Symposium On It Governance, Management
& Audit (Sigma2012), 2012, pp. 1-4.
35 Mohd Ezanee Rusli, R. Harris & Amal Punchihewa. “Quality
Aware Opportunistic Routing Protocol with Adaptive
Coordination Scheme for Wireless Sensor Networks,” in
International Conference On Computational Intelligence,
Modelling And Simulation, pp. 434-439, Sep. 2012.
36 Mohd H. Mohamed Zabil & Kamal Z, Zamli. “Iterative
Test Data Generation Strategy for Sequence-based t-way
Testing,” presented at Postgraduate Research Workshop
@ Softec2012, Jul. 10, 2012, pp. 12-17.
37 Mohd Hazli Mohamed Zabil, Kamal Z. Zamli & Rozmie
R. Othman. “Sequence-Based Interaction Testing
Implementation Using Bees Algorithm,” in IEEE Symposium
On Computers & Informatics (ISCI), Mar. 18-20, 2012, pp.
81-85.
38 Muhammad Iedil Ahmat Jalaluddin & Norziana Jamil.
“Web Applications Audit Based on SQL Injection Attacks,”
presented at Symposium On It Governance, Management
And Audit, 2012.
39 Nazrita Ibrahim & Nazlena Mohamad Ali. “Understanding
User Expectations Of Online Heritage Sites,” in Visual
Informatics International Seminar 2012 (VIIS2012), 2012,
pp. 198-205.
40 Noor Haitham Saleem & Siti Salbiah Mohd Shariff. “Review
on Current Data Integrity Risks in Online Banking Systems,”
presented at Symposium On It Governance, Management
And Audit, 2012, vol. 1.
41 Norziana Jamil, Ramlan Mahmood, Muhammad Reza
Z’aba, Nur Izura Udzir & Zuriati Ahmad Zukarnaen. “A
New Cryptographic Hash Function Based on Cellular
Automata Rules 30, 134 and Omega-Flip Network,” in 2012
International Conference On Information And Computer
Networks, vol. 27, (32), pp. 163-169, Feb. 2012.
42 Nur Atiqah Farid & Mohd Sharifuddin Ahmad. “The Study
And Analysis Of Impediments To Professional Services:
A Knowledge Management Issue,” in The International
Conference On Business Infrastructure (ICBI 2012), 2012,
pp. 181-191.
43 R. F. Olanrewaju & Nor’ashikin Bte. Ali, Othman Khalifa,
Azizah Abd Manaf. “ICT in Telemedicine: Conquering Privacy
and Security Issues In Health Care Services,” presented
2012, pp. 1-6.
44 R. Ramli. “Technology Enhanced Learning: Fostering
Cooperative Learning Through the Integration of Online
Communication as Part of Teaching and Learning
Experience,” in ICIIST 2012: International Conference On
Internet Information Systems And Technologies, 2012,
Paris, (68), pp. 1377-1382.
45 Rosnafisah Sulaiman & Siti Salbiah Mohamed Shariff. “The
Transformation of Home-Based Businesses into electronicHome-Based Businesses,” in International Conference On
Economics, Business Innovation, 2012, v.ol 38, pp. 93-98.
46 Rosnafisah Sulaiman & Taisir Mohammed Hameed. “IT
Risks From The Practioners’ Perspectives,” in Symposium
On It Governance, Management And Audit, 2012, vol 1. pp.
20-24.
47 Sera Syarmila Sameon & Rohaini Ramli. “Cisco‘s E-Learning
Approach In Addressing Different Learning Styles - Towards
Effective Knowledge Building In Organizatio,” presented
2012.
48 Sera Syarmila Sameon & Rohaini Ramli. “E-Voting: A
Trustworthiness In Democratic; A View From Technology,
Political And Social Issue,” in World Academy Of Science
Engneering And Technology, 2012, (68), pp. 1775-1781.
49 Shahrinaz Ismail & Mohd Sharifuddin Ahmad. “Emerging
Personal Intelligence in Collective Goals: Data Analysis on
the Bottom-Up Approach from PKM to OKM,” in Knowledge
Management International Conference (KMICE 2012), pp.
182–187, Jul. 2012.
50 Shahrinaz Ismail & Mohd Sharifuddin Ahmad. “MultiAgent Reputation Point System Framework,” Knowledge
Management International Conference (KMICE 2012), pp.
359–365, Jul. 2012.
51 Shahrinaz Ismail & Mohd Sharifuddin Ahmad. “Emergence
Of Personal Knowledge Networks In Agent-Mediated Pkm
Processes: A Qualitative Analysis In Malaysian Context,” in
International Conference On Computer And Information
Sciences (ICCIS 2012), Jun. 2012.
52 Shahrinaz Ismail & Mohd Sharifuddin Ahmad. “Effective
Personal Knowledge Management: A Proposed Online
Framework,” in International Conference On Information
And Knowledge Society (Iciks 2012), World Academy Of
Science, Engineering And Technology, 2012, (72), pp.
399-408.
53 Shahrinaz Ismail, Roslina Abdul Latif & Mohd Sharifuddin
Ahmad. “Learning Environment Over The Social Network
In Personal Knowledge Management,” in International
Workshop On Collaboration And Intelligence In Blended
Learning (CIBL-2012), 2012, pp. 2-12.
54 Shahrinaz Ismail, Zulhelmi Mohammed, Nur Waheda Md
Yusof & Mohd Sharifuddin Ahmad. “Personal Knowledge
Management Among Adult Learners: Behind The Scene Of
Social Network,” in World Academy Of Science, Engineering
And Technology, 2013, pp. 273-279.
55 Suhaimi Ab Rahman, Nazlia Omar & Noor Baizura Che
Hassan. “Construction of Compound Nouns (CNs) for Noun
Phrase in Malay Sentence,” in International Conference
On Information Retrieval And Knowledge Management,
Camp’12, 2012, pp. 22-25.
56 Suhaimi Ab Rahman & Nazlia Omar. “Transforming
Noun Phrase Structure Form into Heuristics and Rules
For Detecting Compound Noun in Malay Sentence,” in
Knowledge Management International Conference (KMICE
2012), pp. 564-568, Jul. 2012.
57 Sulfeeza Mohd Drus, Siti Salbiah Mohamed Shariff & Marini
Othman. “Knowledge Audit for Knowledge Management
Strategy in Malaysia Electricity Supply Industry,” presented
2012, vol. 1.
58 Zaihisma C. Cob, A. Y.C. Tang & Sharifah J. Syed Aziz.
“Ontology-Based Query System For Uniten Postgraduate
Students,” in International Conference On Ontological And
Semantic Engineering (ICOSE), pp. 462-466, Dec. 2012.
59 Zaihisma Che Cob & Aliza Abdul Latif. “A Review on Cloud
Computing for The Education Institutions,” presented at
Symposium On It Governance, Management And Audit,
2012, pp. 1-4.
60 Zuher Hamed Al-Omari & Mohd Sharifuddin Ahmad.
“Conceptual Framework of Knowledge Growth for
Enhancing Organizational Knowledge Capital,” in
Knowledge Management International Conference (KMICE
2012), Jul. 2012.
Conferences
1
Asmidar Abu Bakar & Rosnafisah Sulaiman. “Academic
Quality Assurance Process: A Case Study Of Examination
Process At Universiti Tenaga Nasional (Uniten),” in
International Conference On Teaching And Learning
Education 2013 (ICTLE’13), Melaka, 2013.
2
Asmidar Abu Bakar, Roslan Ismail, Abdul Rahim Ahmad
& Jamalul-Lail Abd Manan. “Ensuring Data Privacy And
Security In Manet: Case In Emergency Rescue Mission,”
presented at 2012 International Conference On Information
And Knowledge Management (ICIKM2012), 2012.
3
Hasniza Yahya & Rina Md. Anwar. “Monitoring Student
Attendance Using Dashboard,” in International Conference
On Teaching And Learning Education 2013 (ICTLE’13),
Melaka, 2013.
17 Raja Feninferina Raja Azman, K. C. Lim & Yunus Yusoff. “The
Suitability Of Using C As The Introductory Programming
Language (Uniten’s Experience),” in International
(ICTLE’13), Melaka, 2013.
4
Hussien Ahmed Ali, Salman Bin Yussof & Mohammed
Joudah Zaiter. “Waveband Granularity in Ultra-Dense
WDM (UDWDM) Systems,” presented at National Graduate
Conference 2012, 2012.
18 Rohaini Ramli & Rohaiza Ramli. “Ict Supported Cooperative
Learning – Towards Attaining 21St Century Skills,” in
5
Jaspaljeet Singh Dhillon, B. C. Wünsche & C. Lutteroth.
“Towards A Ubiquitous Patient-Centric Telehealth System,”
presented at 9th New Zealand Computer Science Research
Student Conference (NZCSRSC 2012), 2012.
6
Jaspaljeet Singh Dhillon, B. C. Wünsche & C. Lutteroth.
“Evaluation of a Web-Based Telehealth System: A
Preliminary Investigation with Seniors in New Zealand,”
presented at 13th International Conference Of The Nz
Chapter Of The Acm Special Interest Group On HumanComputer Interaction (CHINZ 2012),
19 Rohaini Ramli. “Exploring The Potentials And Challenges Of
Robotics In An Educational Setup From The Constructionism
Theory Perspectives,” in International Conference On
Teaching And Learning Education 2013 (ICTLE’13), Melaka,
2013.
7
8
Jaspaljeet Singh Ranjit Singh, B. C. Wünsche & C. Lutteroth.
“Accessible Telehealth - Leveraging Consumer-Level
Technologies And Social Networking Functionalities For
Senior Care,” in 6th International Conference On Human
System Interaction Hsi´2013 In Sopot, Poland, 2013.
Lim Kok Cheng, Yunus Yusoff, Raja Feninferina Raja Azman
& Muhammad Sufyian Mohd Azmi. “Learnability Evaluation
Design Using Hybrid Methods In Oces,” in International
16 Q. Majeed Yas, Salman Yussof & H. Sh. Jassim. “Trusted
Shortest Path Routing Algorithm for Mobile Ad-Hoc
Network using Fuzzy Logic,” presented at National Graduate
Conference 2012, 2012.
20 Sharul Azim Sharudin & Ismail Ibrahim. “Formalistic
concept in typography and layout applications in the
Billboard Advertisement,” presented at International
Conference Proceedings Of PSRC, 2012.
21 Waleed Maqableh & Manjit Singh Sidhu. “Augmented
Reality as a Technology Assisted Problem Solving Enabler
for Engineering,” presented at 1st Student Conference On
Information Technology, Yanbu, 2012.
22 Waleed Maqableh & Manjit Singh Sidhu. “Augmented
Reality as a Technology Assisted Problem Solving Enabler
for Engineering,” presented at Enhancement of TAPS
Packages Using Tangible User Interface, Yanbu, 2012.
Book Chapters
1
Aida Mustapha, Mohd Sharifuddin Ahmad & Azhana Ahmad.
“Conversational Agents As Full-Pledged Bdi Agents For
Ambient Intelligence,” in Ambient Intelligence - Software
And Applications, Advances In Intelligent Systems And
Computing. A. Berlo, K. Hallenborg, J. M. C. Rodríguez, D.
Tapia & P. Novais, Eds. Switzerland: Springer International
Publishing, 2013, vol. 219, pp. 221 – 228.
2
Azhana Ahmad, Mohd Sharifuddin Ahmad, Mohd Zaliman
Mohd Yusoff & Moamin Ahmed. “Formulating Agent’s
Emotions In A Normative Environment,” in Knowledge
Technology, Communications In Computer And Information
Science. Lukose, D., M. Nasir, Abdul Rahim Rahman, &
Azizah Suliman, Eds. Berlin Heidelberg: Springer-Verlag,
2012, vol. 295, pp. doi: 10.1007/978-3-642-32826-8
3
14 Munther Hameed Abed, A. Y.C. Tang & Abdul Rahim Ahmad.
“Genetic Algorithm and Record to Record Algorithm
(GARRT) for Uncapacitated Examination Timetabling
Problem,” presented at National Graduate Conference
2012 (NatGrad2012), 2012.
Badariah Solemon, Shamsul Sahibuddin & Abdul
Azim Abd Ghani. “Requirements Engineering Process
Improvement And Related Models,” in Software Process
Improvement And Management: Approaches And Tools For
Practical Development. S. Fauzi, M. Nasir, N. Ramli, & S.
Sahibuddin, Ed. Hershey, PA: IGI Global, 2012, pp. 18-33.
doi:10.4018/978-1-61350-141-2.ch002
4
15 Nor’ashikin Ali, Hidayah Sulaiman & Zaihisma Che Cob.
“Towards Knowledge Management In Higher Education:
The Role Of Information Technologies,” in International
C. K. Lee & Manjit Singh Sidhu. “Computer-Aided
Engineering Education – New Learning Approaches And
Technologies,” in Handbook Of Research On Teaching And
Learning In K-20 Education. V. C.X. Wang, Ed. Florid Atlantic
University, 2013. Doi: 10.4018/978-1-4666-4249-2
5
Ghusoon Salim Basheer, Mohd Sharifuddin Ahmad & A. Y.
C. Tang. “A Conceptual Multi-Agent Framework Using Ant
Colony Optimization And Fuzzy Algorithms For Learning
9
Manjit Singh Sidhu. “A Study Outcome on Using Visual
Cues in an Augmented Reality Application for Engineering,”
presented at 1st International Conference On Science,
Technology & Social Sciences, 2012.
10 Mohamad T. Sultan & Salman Yussof. “A Review Of Existing
Routing Protocols For Mobile Ad-Hoc Networks (Manets),”
presented at National Graduate Conference 2012, 2012.
11 Mohammed Joudah Zaiter, Salman Yussof, Abid
Abdelouhahab & C. L. Cheah. “Energy Saving Techniques
in WDM Optical Communication Networks,” presented at
National Graduate Conference 2012, 2012.
12 Mohammed Salim & Marini Othman. “ISG Implementation
at Mosul’s Health Sector,” presented at 18th IBIMA
Conference, May 9-10, 2012.
13 Mueen Mohsen & Rosnafisah Sulaiman. “A Study On
E-Training Adoption For Higher Learning Institutions,”
in International Conference On Teaching And Learning
Style Detection,” in Intelligent Information And Database
Systems. Ali Selamat, Ngoc Thanh Nguyen & Habibollah
Haron, Eds. Springer London Limited, 2013, vol. 7803,
pp. 549 – 558.
6
7
8
9
Manjit Singh Sidhu & Eze Manzura Mohd Mahidin. “An
Effective Conceptual Multisensory Multimedia Model To
Support Dyslexic Children In Learning,” in Learning Tools
And Teaching Approaches Through Ict Advancements. T.
Lawrence, Ed. Idea Group Information Science Reference
& Publishing, 2013, pp. 188 – 205. Doi: 10.4018/978-14666-2017-9.ch017
Moamin A. Mahmoud, Aida Mustapha, Mohd Sharifuddin
Ahmad, Azhana Ahmad, Mohd Zaliman M. Yusof & Nurzeatul
Hamimah Abd Hamid. “Potential Norms Detection In Social
Agent Societies,” in Distributed Computing And Artificial
Intelligence, Advances In Intelligent Systems And Computing.
S. Omatu, J. Neves, J. M. C. Rodriguez, J. F. Paz Santana &
S. R. Gonzalez, Eds. Switzerland: Springer International
Publishing, 2013, vol. 217, pp. 419 – 428.
Moamin A. Mahmoud, Mohd Sharifuddin Ahmad, Azhana
Ahmad, Mohd Zaliman Mohd Yusoff & Aida Mustapha.
“Norms Detection And Assimilation In Multi-Agent Systems:
A Conceptual Approach,” in Communications In Computer
And Information Science. Barbosa, S., Chen, P., Cuzzocrea,
A., Du, X., Filipe, J., Kara, O., Kotenko, I., Sivalingam, K.M.,
Slezak, D., Washio, T., Yang, X., Eds. Berlin Heidelberg:
Springer-Verlag, 2012, vol. 295, pp. 226 – 233, doi:
10.1007/978-3-642-32826-8
Moamin A. Mahmoud, Mohd Sharifuddin Ahmad, Azhana
Ahmad, Mohd Zaliman Mohd Yusoff & Aida Mustapha. “The
Semantics Of Norms Mining In Multi-Agent Systems,” in
Communications In Lecture Notes In Artificial Intelligence
(LNAI). D. Richards & B. H. Kang, Eds. Berlin Heidelberg:
Springer-Verlag, 2012, vol. 7653, pp. 425 – 435.
10 Salama A. Mostafa, Mohd Sharifuddin Ahmad,
Muthukaruppan Annamalai, Azhana Ahmad & Saraswathy
Shamini. “A Dynamically Adjustable Autonomic Agent
Framework,” in Advances In Information Systems And
Technologies. Á. Rocha, et al., Eds. Berlin Heidelberg:
in Communications In Computer And Information Science.
Barbosa, S., Chen, P., Cuzzocrea, A., Du, X., Filipe, J., Kara, O.,
Kotenko, I., Sivalingam, K.M., Slezak, D., Washio, T., Yang,
X., Eds. Berlin Heidelberg: Springer-Verlag, 2012, vol. 295,
pp. 272 – 282, doi: 10.1007/978-3-642-32826-8
Others
1
Abreeza Manap, Tomonaga Okabe, Yuji Ichikawa & Kazuhiro
Ogawa. “Smoothed Particle Hydrodynamics Simulation
For Cold Sprayed Deposition Of Al-Si,” in The 4Th Elyt
Lab Workshop, Mar. 2012.
2
Alicia Y. C. Tang, Azhana Ahmad & Zailani Ibrahim.
“Empowering Learning Management System using MultiAgent Approach: A Proposal,” in 1st COIT Technical Paper
Publication, vol. 1, (1), Aug. 2012.
3
Azlan Iqbal, Harold van der Heijden, Matej Guid & Ali
Makhmali. (2012, Dec.). A Computer Program To Identify
Beauty In Problems And Studies (What Makes Problems
And Studies Beautiful? A Computer Program Takes A Look).
Chessbase News. Available: http://www.chessbase.com/
newsdetail.asp?newsid=8602
4
D. Lukose, Abdul Rahim Ahmad & Azizah Suliman.
Knowledge Technology. Third Knowledge Technology
Week, Ktw 2011, Kajang, Malaysia, July 18-22, 2011.
Revised Selected Papers.
5
Mohammed Azlan Mohamed Iqbal & Saraswathy Shamini.
“Investigating Games Of Very High Complexity,” in
Illumination, vol. 3, (1), p. 10, Jan. 2012.
6
Mohd Fadhil Mohd Siam & Khairul Salleh Mohamed Sahari.
“Design And Development Of Boiler Header Inspection
Robot Prototype,” in Tnbr Compendium 2012, [CR Rom
Circulation], Feb. 2012.
7
N. M. L. Tan. “Technical Talk- A Green Energy System,” in
IET Malaysia Local Network Newsletter (Quarterly), pp. 9,
Apr. 2012.
8
N. M. Razali. “WCO As Feedstock For Biodiesel In Malaysia Barriers Removal Action Plan, Legislation & Enforcement,”
in Lab Pengurusan Sisa Pepejal 2012, Mar. 2012.
11 Salama A. Mostafa, Mohd Sharifuddin Ahmad,
Muthukaruppan Annamalai, Azhana Ahmad & Saraswathy
Shamini. “A Conceptual Model Of Layered Adjustable
Autonomy,” in Advances In Information Systems And
Technologies. Á. Rocha, et al., Eds. Berlin Heidelberg:
12 Shahrinaz Ismail & Mohd Sharifuddin Ahmad. “Emergence
Of Personal Knowledge Management Processes Within
Multi-Agent Roles,” in Communications In Lecture Notes
In Artificial Intelligence (LNAI). D. Richards & B. H. Kang,
Eds. Berlin Heidelberg: Springer-Verlag, 2012, vol. 7457,
pp. 221 – 228
13 Shamimi Halim & Mohd Sharifuddin Ahmad. “A Nodal
Approach To Agent-Mediation In Personal Intelligence,”
in Communications In Computer And Information Science.
S. Barbosa, Chen P., A. Cuzzocrea, Du, X., J. Filipe, O. Kara,
I. Kotenko, K. M. Sivalingam, D. Slezak, T. Washio, Yang, X.,
Eds. Berlin Heidelberg: Springer-Verlag, 2012, vol. 295,
pp. 368 – 347, doi: 10.1007/978-3-642-32826-8
14 Shamimi Halim, Muthukaruppan Annamalai, Mohd
Sharifuddin Ahmad & Rashidi Ahmad. “A Conceptualisation
Of An Agent-Oriented Triage Decision Support System,”
129
College of Business Management and Accountancy (COBA)
Journals
1
Abdullah N. Abduljabbr, Omar Rabee’a Mahdi & Mahmoud
Khalid Almsafir. (2012). Relationship Between Time
Management And Job Performance: Empirical Study In
Malaysia Private University. Journal Of Advanced Social
Research, 2(10).
14 Basheer Abbas Al-Alak. (2012). Economic Vision Of
E-Learning. Edara Journal, 43-46.
15 Christine Cheah & Ken, S. T. T. (2013). Culture Dimensions
Comparison: A Study Of Malaysia And South Korea. Review
Of Integrative Business And Economics Research (Riber), 2
(1).
2
Adel Mohamed Ali Shurbagi & Ibrahim Zahari. (2012).
The Relationship Between Organizational Culture And
Job Satisfaction In National Oil Corporation Of Libya.
International Journal Of Humanities And Applied Sciences
(IJHAS), 1(3),
16 Christine Cheah & Ken, S. T. T. (2013). The Effects Of
Emotional Intelligence On Counterproductive Work
Behaviors And Organizational Citizenship Behavior.
International Journal Of Accounting And Business
Management, 1 (1).
3
Ayman Abdal-Majeed Al-Smadi & Mahmoud Khalid
Almsafir. (2012). Islamic Finance Versus Conventional
Finance, From Macroeconomic Perspective: A Review.
Journal Of Islamic And Human Advanced Research, 2(4).
4
Azizah Abdullah, Page, M. & Masdiah Abdul Hamid. (2012).
Influence Of Corporate Governance On Fees: UK Evidence.
Terengganu International Finance And Economics Journal
(TIFEJ), 2(2), 1-14.
17 Elinda Esa & Nazli Anum Mohd Ghazali. “Corporate Social
Responsibility And Corporate Governance In Malaysian
Government-Linked Companies.” Corporate Governance
- The International Journal Of Business Society, vol. 12,
(3), pp. 292-3005, Jun. 2012.
5
6
Azleen Binti Ilias & Mohd Zulkeflee B. Abd Razak. (2013).
Communication Apprehension (Ca): A Case Of Accounting
Students. International Journal Of Independent Research
Studies (Ijirs), 2(1).
Azleen Binti Ilias & Mohd Zulkeflee B. Abd Razak. (2013).
Communication Apprehension (Ca): A Case Of Accounting
Students. International Journal Of Independent Research
Studies (Ijirs), 2(1).
7
Azleen Binti Ilias & Nurul Nazirah Binti Zainudin. (2013).
Factor Affecting The Computerised Accounting System
(Cas) Usage In Public Sector. Journal Of Internet Banking
And Commerce, 18 (1).
8
Azleen Ilias, Mohd Zulkeflee Abd Razak, Nek Kamal Yeop
Yunus & Siti Fara Fadila Abd Razak. (2012). How Accounting
Students Perceived Towards Teamwork Skills. Journal Of
Education And Vocational Research, 3(12), 387-398.
9
Azwan Abdul Rashid, Ahmad Subhi Muhammad Sidek,
Mahlindayu Tarmizi & Wan Mohammad Taufik Wan
Abdullah. “Exploring The Effects Of Board Characteristics
On Intellectual Capital Disclosure: Evidence From Malaysian
Technology Sector.” Journal Of Business Management, Vol.
2, (1), pp. 19-32, Jan. 2012.
10 Azwan Abdul Rashid, Muhd Kamil Ibrahim, Radiah Othman
& Kok, F. S. “IC disclosures in IPO prospectuses: evidence
from Malaysia.” Journal Of Intellectual Capital, vol. 13, (1),
pp. 57-80, Jan. 2012.
11 Basheer A. Al-Alak & Ghaleb A. El-Refae. (2012). An
Investigation Of The Relationship Between Job Satisfaction
And Organizational Empowerment As Perceived By FrontLine Managers In 5-Star Hotels. Int.J. Of Economics And
Business Research, 4(3).
18 Fatimah Hanim Abdul Rauf, Nor Hasimah Johari, Sharifah
Buniamin & Noor Raida Abd Rahman. (2012). The Impact
Of Company And Board Characteristics On Earnings
Management: Evidence From Malaysia. Global Review Of
Accounting And Finance, 3(2), 114-127.
19 Hussain Ali Bekhet & Ali Matar. (2012). Risk-Adjusted
Performance: A Two-Model Approach Application In
Amman Stock Exchange. International Journal Of Business
And Social Science (IJBSS), 3 (7).
20 Hussain Ali Bekhet & Azlina Abdullah. (2012). Scrutinizing
The Influence Of The Performance Of Malaysia Agricultural
Sector On Energy Use. African Journal Of Economic And
Sustainable Development, Inderscience Publisher, 1(4),
337-352.
21 Hussain Ali Bekhet & Basheer A. Al-Alak. (2012). Marketing
Feasibility Of Malaysian Eco-Products. Interdisciplinary
Environmental Review, Inderscience Publisher, 13(4), 269278.
22 Hussain Ali Bekhet & Nor Hamisham Binti Harun. (2012).
Energy Essential In The Industrial Manufacturing In
Malaysia. International Journal Of Economics And Finance
(Canada), 4(1).
23 Hussain Ali Bekhet & Nor Salwati Othman. (2012).
Examining The Role Of Fiscal Policy In Malaysian Stock
Market. International Business Research, Canadian Center
Of Science And Education, 12, 59-67.
24 Hussain Ali Bekhet, Noriza Mohd Saad & Nor Edi
Azhar Mohamad. (2012). Do The Facets Of Islamic And
Conventional Bonds Influence Issuer Performance In
Malaysia? Journal Of Business Management, 2(1).
25 Hussain Ali Bekhet. (2012). Assessing Development
Efficiency In Malaysian Economy: Input-Output Approach.
Int. J. Economics And Business Research (IJEBR), 3(4).
12 Basheer Abbas Al-Alak & Ahmad Salih Mheidi Alnaser.
(2012). Assessing The Relationship Between Higher
Education Service Quality Dimensions And Student
Satisfaction. Australian Journal Of Basic And Applied
Sciences, 6, (1), 156-164.
26 Ibrahim Zahari & Adel Mohamed Ali Shurbagi. (2012).
The Effect Of Organizational Culture And The Relationship
Between Transformational Leadership And Job Satisfaction
In Petroleum Sector Of Libya. International Business
Research (IBR), 5(9).
13 Basheer Abbas Al-Alak & Ghaled A. el Refae. (2012). The
Relationship Between Service Quality, Satisfaction, And
Behavioral Intentions Of Malaysian Spa Center Customers.
International Journal Of Business And Social Sciences, 3(1),
198-206.
27 Ibrahim Zahari & Chiew Mei Ling. (2012). The Effect Of
Organizational Culture And The Relationship Between
Transformational Leadership And Job Satisfaction In Oil
And Gas Sector In Malaysia. Thailand Hr Journal (THRJ),
4, 19-35.
130
28 Ibrahim Zahari & Chiew Mei Ling. (2012). The Effect Of
And Gas Sector In Malaysia. Journal Of Advanced Social
Research JASR, 2(8), 344-354.
40 Nor Edi Azhar Mohamad & Noriza Mohd Saad. (2013).
Cost Of Capital :The Effect To Firm Value And Profitability
Performance In Malaysia. International Journal Of Academic
Research In Accounting, Finance And Management Sciences,
2 (4).
29 Juliana Anis Ramli, Khairul Nizam Surbaini & Mohd
Ismail Ramli. (2013). Assessing The Effects Of Corporate
Governance Attributes On The Quality Of Directors-Related
Information Disclosure: The Empirical Study Of Malaysian
Top 100 Companies. American Journal Of Economics, 3 (2),
90-99.
41 Nor Edi Azhar Mohamad & Noriza Saad. (2012) Syariah
Reits Vis-A-Vis Conventional Reits: An Analysis. Human
Resource Management Academic Research Society, 2(7),
1-17.
30 Juliana Anis Ramli, Khairul Nizam Surbaini, Mohd Rizuan
Abdul Kadir & Zulkifli Zainal Abidin. (2013). Examining
Pre-Internship Expectations Among Employers On The
Students’ Characteristics And Internship Programme:
The Empirical Study Of Malaysian Government-Linked
University. Journal Of Management, 3 (2), 112-120.
31 Kweh, Q. L., Chan, Y. C. & Ting, I. W. K. (2013). Measuring
Intellectual Capital Efficiency In The Malaysian Software
Sector. Journal Of Intellectual Capital, 14 (2).
32 Mahlindayu Tarmidi @ Tokhid, Azwan Abd Rashid &
Wan Mohamad Taufik Wan Abdullah. An Empirical Study
Of Accounting Information System Security Threats
In Enterprise Resource Planning (ERP) Environment.
Terengganu International Finance & Economic Journal,
2(1).
33 Masdiah Abdul Hamid & Azizah Abdullah. (2012). Influence
of Corporate Governance on Audit and Non-Audit Fees:
Malaysian Evidence. Journal Of Business And Policy
Research, 7(3), 1-22.
34 Mohamad Abdul Hamid, Nik Mutasim Nik Ab Rahman
& Norfaizah Mat Nor. (2012). Leadership behavior and
performance: A case study of Takaful representatives in
Malaysia. African Journal Of Business Management (AJBM).
6(6), 2291-2298. DOI: 10.5897/AJBM11.1874
35 Mohamed Gaafar Elnugoumi, Zainal Ariffin Ahmad &
Mahmoud Khalid Almsafir. (2012). Current Status And
Challenges Of Solar Energy In Malaysia: A Review. Journal
Of Advanced Science And Engineering Research, 2(4).
36 Mohd Rizuan Abdul Kadir, Abdullah Ibrahim, Abdul Aziz
Abdullah & Syed Ghazali Wafa Syed Adwam Wafa. (2013).
Perception Of Accounting Practitioners On Masb Tri.
International Journal Of Humanities And Social Science,
3(2).
37 Mohd Rizuan Abdul Kadir, Zulkifli Zainal Abidin, Che
Azizah Abdul Rahman, Abdul Aziz Abdullah, Syed Ghazali
Wafa Syed Adwam Wafa, Norhayati Adullah & Abdullah
Ibrahim. (2013). Structural Accounting Support Service
For Construction Companies In Malaysia – A Qualitative
Pilot Test. American International Journal Of Contemporary
Research, 3 (2).
38 Mohd Zainal Munshid Harun & Rosli Mahmood. (2012).
The Relationship Between Group Cohesiveness And
Performance: An Empirical Study Of Cooperatives
Movement In Malaysia. International Journal Of Cooperative
Studies, 1(1), 15-20.
39 Noor Raida Abd Rahman, Izyan Zahirah Ishak, Nur-Fadzrini
Ramali & Sri Kogilavaani A Sedubadi @ Sedupathi.
(2013). Assessing The Influence Of Capital Structure
On Environmental Reporting Practices Of Malaysian
Companies. International Journal Of Science Commerce
And Humanities, 1 (3).
42 Nor Hafizah Abdul Mansor & Azleen Ilias. (2013). Goods
And Services Tax (Gst): A New Tax Reform In Malaysia.
International Journal Of Economics Business And
Management Studies, 2(1), 12-19
43 Nora Yusma Mohamed Yusof. (2013). Measuring The
Effects Of World Oil Price Change On Economic Growth
And Energy Demand In Malaysia: An Ardl Bound Testing
Approach. International Journal Of Trade, Economics &
Finance (Ijtef), 4 (1), 29-36. Doi: 10.7763/IJTEF.2013.
V4.256
44 Norhayati Mat Husin, Keith Hooper & Karin Olesen. Analysis
Of Intellectual Capital Disclosure - An Illustrative Example.
Journal Of Intellectual Capital, 13(2), 196–220.
45 Noriza Binti Mohd Saad, Nor Razuana Binti Amran, Khairi
Safwan Mohd Shaufi. (2012). Performance of levered
and unlevered firms in Malaysia. International Journal
Of Academic Research In Economics And Management
Sciences, 1(5).
46 Norlaila Mazura Mohaiyadin, Mohd Amran Jaafar, Afiqah
Hassan, Amira Rafhan Jafri & Nur Aziannah Abd Azar.
(2013). Undergraduate Accounting Students’ Perceptions
Of Students’ Empowerment And Accounting Technical
Skills: Case In Universiti Tenaga Nasional (Uniten), Malaysia.
Social Sciences, Science Publishing Group, 2 (2), 44-52.
47 Norlaila Mazura Mohaiyadin. (2013). Effectiveness Teaching
Methods (Etm) And Effectiveness Instructor Characteristics
(Eic): A Comparative Study Among Universiti Tenaga
Nasional (Uniten) Accounting Students. Scottish Journal
Of Arts, Social Sciences And Scientific Studies, 8 (2), 64-77.
48 Nurazariah Abidin & Salina Daud. (2012). The
Personality Traits: Business Versus Technical Graduates.
Communications Of The IBIMA. DOI: 10.5171/2011/360500
49 Nurul Nadiah Ahmad, Intan Syafiqah Wok Azmi, Nalliz
Zainal Abidin & Syazwani Mohamed. (2012). Industry
analysis of research and development disclosure by
selected industries in Malaysia. Scottish Journal Of Arts,
Social Sciences And Scientific Studies, 5(2).
50 Omar Rabee’a Mahdi Al-Mfraji & Mahmoud Khalid Almsafir.
(2012). Diagnosing Of Sustainable Competitive Advantage
Using Six Sigma Methodology. International Journal Of
Business And Management, 7(7).
51 Omar Rabee’a Mahdi Al-Mfraji & Mahmoud Khalid Almsafir.
(2012). Sustainable Competitive Advantage Using Six
Sigma Methodology: Review. Journal Of Modern Marketing
Research, 1(1).
52 O. Chin. (2012). The Influence Of External Environment
Factors To The Relationship Quality Between Franchisee
And Franchisor. Journal Of Business Management, 2(1).
53 O. Chin. (2013). Dimension Of Franchise Relationship
Quality: A Malaysian Perspective. International Journal
Of Science Commerce And Humanities, 1 (2).
54 Lee, S. F. & Kweh, Q. L. (2010). Analysis on the Impact of
Foreign Exchange Differences on the Financial Performance
131
of Malaysia Public Listed Companies. Terengganu
International Finance And Economics Journal (Tifej), 2(1),
1-8.
55 Ken, S. T. T. & Cheah, Y. Y. (2012). Business Graduates’
Competencies In The Eyes Of Employers: An Exploratory
Study In Malaysia. World Review Of Business Research, 2
(2), 176-190.
56 Ken, S. T. T. & Cheah, Y. Y. (2012). Emotional Intelligence
And Transformational Leadership Outcomes Insights
From A Malaysian Perspective. World Review Of Business
Research, 2 (2), 151-160.
57 Ken, S. T. T. & Cheah, Y. Y. (2012). Is There A Gap Between
Practitioners’ And Academicians’ Perceptions On Business
Graduates’ Competencies In Malaysia? Journal Of Education
And Vocational Research, 3(5), 151-160.
58 Cheah, Y. Y. & Ken, S. T. T. & Nur Shazyani Mohd Salleh.
(2012). Does Effectiveness Of Training Program Influenced
Teachers’ Job Performance? Evidence From Malaysia.
Journal Of Education And Vocational Research, 3 (6), 173177.
59 Saeed Hameed Aldulaimi & Md Saaid Sailan. (2012). The
National Values Impact On Organizational Change In Public
Organizations In Qatar. International Journal Of Business
And Management (Canada), 7(1).
60 Salina Daud, Noraina Mazuin Sapuan, Nurazariah Abidin
& Jegatheesan Rajadurai. “Do Business Graduates’
Attributes Fulfill Industry Requirements And Expectations?”
Australian Journal Of Basic And Applied Sciences, vol. 5,
(9), pp. 68-74, Aug. 2012.
Intentionality: Case Of Unit Trust. Terengganu International
Finance And Economics Journal, vol. 2(2), pp. 1-12.
68 Vitiashini Arunasalam, Omar Rabee’a Mahdi & Mahmoud
Khalid Almsafir. (2012). Empirical Study On The Impacts
Of Psychological Commitment On Empolyee’s Engagement
In Nhk Manufacturing Company In Malaysia. Journal of
Advanced Social Research JASR, 2 (7), 329-343.
69 Wan Mohammad Taufik Wan Abdullah, Mohmad Sakarnor
Deris, Marziana Haji Mohamad & Mahlindayu Tarmidi.
“Perception Of Government Officials Towards Government
Procurement System: Evidence From The Eastern Region
Of Malaysia.” African Journal Of Business Management,
vol. 6, (23,) pp. 6853-6859, Jul. 2012.
70 Wan Mohammad Taufik Wan Abdullah, Mohd Hisyam
Mohd Ghazali & Sharifah Buniamin. The Effect Of Board
And Ownership Structure On Environmental Reporting:
A Case Of The Top 100 MCG Index Companies. OIDA
International Journal Of Sustainable Development, 4(7),
71-80.
71 Zainal Ariffin Ahmad & Adel Tajasom. (2012).
The Neuroscience Of Decision Making: A Review.
Neuroleadership Journal, 4.
Proceedings
1
Abdul Rahman Zahari & Elinda Esa. (2013). Gastronomy
Brand Equity And Travel Intentions To Malaysia. Proceedings
of the National Symposium And Exhibition On Business And
Accounting (Nseba) 2013 on 19 June at Universiti Tenaga
Nasional, Pahang.
2
Abdul Rahman Zahari & Elinda Esa. (2013). How Small
Traders Perceived Rural Transformation Centre (Rtc): A Case
Of Rtc Kelantan. Proceedings of the National Symposium
And Exhibition On Business And Accounting (Nseba) 2013
on 19 June atUniversiti Tenaga Nasional, Pahang.
3
63 Shahrul Nizam Salahuddin, Zuliawati Mohamed Saad, Ken,
S. T. T. & Mohd Nur Ruzainy Alwi. (2012). Job characteristics
and employee wellbeing: A Case Of Malaysian smes.
Journal Of Global Entrepreneurship, 2(1), 36-47.
Adel Mohamed Ali Shurbagi & Ibrahim Zahari. (2012).
The Relationship Between Transformational Leadership,
Job Satisfaction And The Effect Of Organizational Culture
In National Oil Corporation Of Libya. Proceedings of
International Conference On Management, Applied And
Social Sciences (ICMASS’ 2012).
4
64 Sharifah Buniamin, Nor Hasimah Johari, Noor Raida Abd
Rahman & Fatimah Hanim Abdul Rauf. “Board Diversity
And Discretionary Accruals Of The Top 100 Malaysia
Corporate Governance (MCG) Index Company.” African
Journal Of Business Management, vol.6 (29), pp. 84968503, Jul. 2012.
Aerni Isa, Juraifa Jais & Mafuzah Mohamad. (2013). The
Relationship Between Pos And Organizational Commitment
In Malaysian Glcs. Proceedings of the National Symposium
on 19 June at Universiti Tenaga Nasional, Pahang.
5
Alhana Othman, Izzatul Ussna Ridzwan, Ahmad Firdaus
Ibrahim, Muhamad Fadzil Masri & Nurfaiz Aizat Mohd Azmi.
(2013). The Assessment Of Academic Integrity Among
Accounting Student In Private University. Proceedings of
the National Symposium And Exhibition On Business And
Nasional, Pahang.
6
Alhana Othman, Izzatul Ussna Ridzwan, Banumathy
Sivalingam, Jeevarani Sunmunga Raja & Pushpavaani
Manoharan. (2013). Performance Analysis Between The
Distressed Companies And The Healthy Companies In
Malaysia. Proceedings of the National Symposium And
Exhibition On Business And Accounting (Nseba) 2013 on
19 June at Universiti Tenaga Nasional, Pahang.
7
Azrinawati Mohd Remali @ Abdul Jalil, Mohamamd
Afiq Ghazali, Mohammad Khairi Kamaruddin & Tan, Y. K.
61 Salina Daud, Noraina Mazuin Sapuan, Nurazariah Abidin
& Jegatheesan Rajadurai. “Efficient Human Resource
Deployment Technique In Higher Education: A Standpoint
From Malaysia.” African Journal Of Business Management,
vol. 6, (25), pp. 7533-7547, Aug. 2012, doi: 10.5897/
AJBM11.558
62 Salina Daud. “Knowledge Management Processes In Smes
And Large Firms: A Comparative Evaluation.” African
Journal Of Business Management, vol. 6, (11), pp. 42234233, Mar. 2012.
65 Sharifah Buniamin, Norhijrahturhajar Ali, Nur Sulaiha Abul
Hasan & Santha Rajandran. (2012). IFRS Convergence:
Perceptions Of Accounting Academicians In Malaysia
Higher Learning Institutions. World Conference On Islamic
Thought 2012, 106.
66 Suzaida Bakar & Noraina Mazuin Sapuan. (2012). Are
Stock Market Returns Related To The Weather Effects
Factors?: Empirical Evidence From Malaysia. Terengganu
International Finance And Economics Journal (TIFEJ), 2(2).
67 Tan, K. L., Azlina Abdullah, Nurul Wahilah Abdul Latif &
Ting, I. W. K.. (2012). Assessing The Variables Of Personal
Characteristics Affecting The Formation Of Investment
132
(2013). Understanding Academic Performance Based On
Demographic Factors, Motivation Factors And Learning
Styles. Proceedings of the International Conference On
Teaching And Learning Education 2013 (Ictle’13) on 21-22
May at Renaissance Hotel, Melaka.
8
9
Azrinawati Mohd Remali @ Abdul Jalil, Zuraini Abdullah
Zawawi, Nor Erny Haslinda Abdul Razak, Nur Anira Anis
Ruslan & Nur Hanis Hanafiah. (2013). Intention To Pay
Zakat On Employement Income. Proceedings of the National
Symposium And Exhibition On Business And Accounting
(Nseba) 2013 on 19 June at Universiti Tenaga Nasional,
Pahang.
Azrinawati Mohd Remali @ Abdul Jalil, Zuraini Abdullah
Zawawi, Adnan Abd. Hamid & Khairul Nizam Surbaini.
(2013). Approaches To Learning Of Uniten Students.
Proceedings of the International Conference On Teaching
And Learning Education 2013 (Ictle’13) on 21-22 May at
Renaissance Hotel, Melaka.
10 Chan, Y. C. (2013). Abnormal Audit Fees Surrounding
Earnings Restatements. Proceedings of the National
Pahang.
11 Farahdilah Ghazali & Mafuzah Mohamad. (2013). Sexual
Harassment At Workplace: What Academics Have To Say?
Proceedings of the National Symposium And Exhibition
On Business And Accounting (Nseba) 2013 on 19 June at
Universiti Tenaga Nasional, Pahang.
12 Fatimah Hanim Abdul Rauf, Nur Adnin Mohd Rais, Nursanaa
Shuhaimi & Wan Farhah Shafiy W. Kamalluarifin. (2013).
Firm Characteristics And Timeliness Of Corporate Internet
Reporting: Malaysian Evidence. Proceedings of the National
Pahang.
13 Fatimah Hanim Abdul Rauf, Wan Ahmad Farouq Wan Asri,
Nur‘Aqilah Ahmad Shahar & Nor Aishah Mohd Azman.
(2013). Demographic And Motivation Factors Towards
Academic Dishonesty: Evidence From A Malaysian Private
University. Proceedings of the International Conference On
14 Fatimah Hanim Abdul Rauf, Wan Ahmad Farouq Wan Asri,
Nur‘Aqilah Ahmad Shahar & Nor Aishah Mohd Azman.
(2013). Demographic And Motivation Factors Towards
Academic Dishonesty: Evidence From A Malaysian Private
University. Proceedings of the International Conference On
15 Hakim Hsoonee Almayali & Zainal Ariffin Ahmad. (2012).
Leadership Behaviours And Academic Performance In
Iraqi Public Universities: A Review. Proceedings Of 2nd
International Conference On Education And Information
Management (ICEIM), (pp. 716-721).
16 Hamiza Jamaludin & Nor Razuana Amran. (2013).
Retention Of Front Line Hotel Employee: Do Internal Market
Orientation Really Matter? Proceedings of the International
Accounting and Business Conference 2013 held on 23-24
April at the Universiti Teknologi MARA, Johor.
17 Hussain Ali Bekhet & Mohamed Ibrahim Mugableh.
(2012). Examining The Equilibrium Relationships Between
Foreign Direct Investment Inflows And Employment In
Manufacturing And Services Sectors: Evidence From
Malaysia. Proceedings of Proceedings Of 2nd International
Conference On Education And Information Management
(ICEIM 2012), (pp. 69-72).
18 Hussain Ali Bekhet & Nor Salwati Othman. (2012).
Exploring The Role Of Fiscal Policy In Financial Market:
A Case Study In Malaysia Stock Market. Proceedings of
International Conference On Management, Economics And
Finance (ICMEF), 15-16 October, Kuching.
19 Ibrahim Zahari & Samladevi Muniandy. (2012). What
Factors Influencing Employee Response Towards Change
Management? The Study On Multinational Semiconductor
Operating In Malaysia. Proceedings of International
Conference On Management, Economics And Finance
(ICMEF), 15-16 October, Kuching.
20 Ting I. W. K. & Kweh, Q. L. (2013). Does Ownership
Structure Affect Malaysian Firm Performance? Proceedings
Nasional, Pahang.
21 Ting I. W. K. & Kweh, Q. L. (2013). The Effects Of Ei On
Counterproductive Work Behaviors And Organizational
Citizenship Behavior. Proceedings of the International
Accounting and Business Conference 2013 held on 23-24
April at the Universiti Teknologi MARA, Johor.
22 Ting I. W. K., Suzaida Bakar & Cheah, C. (2013). Ownership
Concentration And Leverage Decision. Proceedings of
Nasional, Pahang.
23 Izzatul Ussna Ridzwan & Alhana Othman. (2013). Factors
Determining Organizational Commitment Towards The
Security Controls Implementation In A Computer-Based
System: A Survey Of The Malaysian Online Banking.
24 Izzatul Ussna Ridzwan, Alhana Othman, Nur Amirah
Mohd Zain, Nurul Farah Raizal & Nurul Syafiqa Khamsan.
(2013). Factors Affecting Users’ Acceptance Of E-Banking:
An Evidence From Klang Valley, Malaysia. Proceedings of
Nasional, Pahang.
25 Juraifa Jais & Mafuzah Mohamad. (2013). Malaysian
Transnational Education:Examining The Impact Of
Transnational Teaching On Academics. Proceedings of
Nasional, Pahang.
26 Ting I. W. K., Kweh, Q. L. & Chan, Y.C. (2013). The Factors Of
Intellectual Capital Efficiency Among Malaysian Software
Companies. Proceedings from the National Symposium
on 19 June atUniversiti Tenaga Nasional, Bandar Muadzam
Shah, Malaysia.
27 Kweh, Q. L., Lu, W. M. & Kang, W. (2013). Intellectual
Capital And Performance Of The Chinese Non-Life Insurers.
Proceedings of the International Accounting and Business
Conference 2013 held on 23-24 April at the Universiti
Teknologi MARA, Johor.
133
28 Mafuzah Mohamad & Juraifa Jais. (2013). Malaysian
Transnational Education: The Impact Of Academic Mobility
On Work-Life Balance. Proceedings of the National
Pahang.
29 Mahlindayu Tarmidi, Azwwan Abdul Rashid, Mohmad
Sakarnor Deris & Rusli Abdul Roni. (2012). Long Term
Effects Of World Oil Prices Changes On Income And Price
Elasticity Of Energy Demands: Evidence For Malaysia.
Proceedings of GCARME, 7-9 Dec.
30 Mahlindayu Tarmidi @ Tokhid, Azwan Abd Rashid & Rusli
Abdul Roni. (2012). An Empirical Study On The Importance
And Implementation Of Cobit Process: Exploring Malaysian
Top 100 Corporate Governance Companies. Proceedings
of the 2nd International Conference On Governance And
Accountability (ICGA2012).
31 Marziana Hj. Mohamad, Norsalihah Mohd Nor, Norshiela
Bakar & Winnie Lemi Nanta. (2013) A Study On Tax
Knowledge, Fairness And Perceived Behavioral Control
Between Accounting And Non Accounting Students
At Uniten, Muadzam Shah Pahang. Proceedings of the
Education 2013 (Ictle’13) on 21-22 May at Renaissance
Hotel, Melaka, Malaysia.
32 Marziana Hj. Mohamad, Nur Ain Zainal, Nurhafizah Abd
Hamid & Nur Aqilah Rosli. (2013). Taxpayers Attitudes And
Compliance Behavior Among Small Medium Enterprises
In Johor. Proceedings of the National Symposium And
33 Marziana Mohamad, Wan Mohammad Taufik Wan Abdullah
and Mohmad Sakarnor Deris. (2012). Audit Delay in Local
Authorities: An Exploratory Study in Kedah, Perak and
Kelantan. Proceedings of 2012 International Conference
On Economics, Business Innovation (ICEBI2012).
34 Masdiah Abdul Hamid & Norlaila Mazura Mohaiyadin.
(2013). Board Of Directors And The Timeliness Of Financial
Reporting In Malaysia. Proceedings of the National
Pahang.
35 Masdiah Abdul Hamid & Norlaila Mazura Mohaiyadin.
(2013). Internal Shariah Audit Function (Isaf): A New
Approach For Integrated Shariah Audit In Islamic Financial
Institutions (Ifis). Proceedings of the National Symposium
36 Masdiah Abdul Hamid and Azizah Abdullah. (2012).
Influence of Corporate Governance on Audit and Non-Audit
Fees: Malaysian Evidence. Proceedings of Asia-Business
Research Conference 2012 (pp. 1-24).
39 Mohamad Nasir Saludin & Juraifa Jais. (2013).
Determination Important Characteristics Of Effective
Lecturer:Undergraduate Student Perspectives In College
Of Business Administration And Accounting (Coba).
40 Mohd Rizuan Abdul Kadir, Eswaran Naidu Rajenderen
& Logeswaran Sukamaran. (2013). Enterprise Resource
Planning (Erp) Implementation: Empirical Study On Smes
In Kuala Lumpur. Proceedings of the National Symposium
41 Mohd Rizuan Abdul Kadir, Juliana Anis Ramli, Zulkifli Bin
Zainal Abidin & Khairul Nizam Surbaini. (2013). Malaysian
Public Listed Companies Practiced On Zakat Disclosure.
42 Mohd Zulkeflee Abd Razak, Azleen Ilias & Siti Fara Fadila
Abd. Razak. (2013). Iservice Recovery Performance In
Malaysia Banking Industry: A Proposed Framework Model
On Frontline Staff’S Performance Based On The Applied
9 Antecede. Proceedings of the National Symposium And
43 Mohd Zulkeflee Abd Razak, Azleen Ilias & Siti Fara Fadila
Abd. Razak. (2013). Importance Versus Performance
Measuring Factors: A Model To Be Tested On Foreign
Guests Perceptions Of Services Provided By Small And
Medium-Sized Enterprises (Smes) Hotels In Malaysia.
44 Nor Hamisham Harun & Norsalwati Othman. (2013).
Analyzing The Co-Integration Between Gross Output And
Energy: A Case Study Of Construction Industry In Malaysia.
45 Nor Hamisham Harun & Norsalwati Othman. (2013).
Causal Relationship Between Energy And Gross Output
In Malaysian Manufacturing Industry. Proceedings of the
National Symposium And Exhibition On Business And
Nasional, Pahang.
46 Nor Hashimah Johari. (2013). The Effectiveness Of Audit
Committee In Increasing The Companies’ Performance: An
Empirical Study On Top 100 Listed Companies In Malaysia.
Proceedings of the International Accounting and Business
Conference 2013 held on 23-24 April at the Universiti
Teknologi MARA, Johor.
37 Masdiah Abdul Hamid. (2012). Disclosure Practices Of
Banking Sectors In Malaysia. Proceedings of International
Conference On Islamic Economy And Business (ICIEB), 29
June - 1 July (pp. 737-748).
47 Noraini Ismail & Nurul Huda Ahmad Razali. (2013). Modus
Operandi In Money Laundering: An Overview. Proceedings
Nasional, Pahang.
38 Masdiah Abdul Hamid & San, S. (2013). The Impact Of
Audit Quality On Accounting Conservatism In Financial
Reporting Of Malaysian Listed Companies. Proceedings
of 4th International Conference On Business And Economic
Research (4th Icber 2013) on 4-5 March at Golden Flower
Hotel, Bandung, Indonesia (pp. 1345-1361).
48 Noriza Mohd Saad & Mohd Nizal Haniff. (2013). Equity
Based Sukuk: Robust Performance Of Musharakah And
Mudharabah Contract. Proceedings of the National
Pahang.
134
49 Norlaila Mazura Mohaiyadin & Masdiah Abdul Hamid.
(2013). Assessment Method (Am), English Communication
And Language (Eng) And Pre-Requisite Knowledge Of
Student (Pre): A Comparative Study Among Universiti
Tenaga Nasional (Uniten) Accounting Students. Proceedings
of the International Conference On Teaching And Learning
Education 2013 (Ictle’13) on 21-22 May at Renaissance
Hotel, Melaka.
50 Norlaila Mazura Mohaiyadin, Mohd Rizuan Abdul Kadir,
Afiqah Widad Abdul Mutalib, Norliyana Nasarudin & Nur
Jannah Farah Nadiah Mohd Ridzwan. (2013). Perception
On Professional Accounting Programmes: A Comparative
Study Among Universiti Tenaga Nasional (Uniten)
Undergraduate Accounting Students. Proceedings of the
National Symposium And Exhibition On Business And
Nasional, Pahang.
51 Norsalwati Othman & Nor Hamisham Harun. (2013). Does
Fiscal Policy Changes Affect Energy Consumption And
Environmental Degradation? A Bound Testing Approach.
52 Norsalwati Othman & Nor Hamisham Harun. (2013).
A Bivariate Analysis Between Export And Energy
Consumption: A Case Study Of Malaysia. Proceedings of
Nasional, Pahang.
On Statistics In Science, Business And Engineering (IEEE
Conference).
59 Yang, Y. J., Kweh, Q. L. & Lin, R. C. (2013). Earnings Quality Of
Business Group Firms: Evidence From Taiwan. Proceedings
of the 3rd Annual International Conferences On Accounting
And Finance (Af 2013).
60 Zainal Ariffin Ahmad. (2012). Leading Innovation: A
Matter Of Style. Proceedings of International Conference
On Innovation, Management And Technology Research
(ICIMTR 2012), 21-22 May (pp. 716-721).
61 Zurina Ismail & Rusnita Alimun. (2013). Does Tqm Practices
Enhance Workforce Performance: A Case Of Uniten.
62 Zurina Ismail, Shahrul Suhaimi Ab. Shukor & Noor Akma
Norzalan. (2013). The Role Of Organization Justice In
Compensation: Evidence From Malaysia’ Glc. Proceedings
Nasional, Pahang.
Conferences
1
Abbod Naseb Abbod AlTamimi & Ibrahim Zahari. (2012,
July). Total Quality Management In Service Industry: A
Study On The Islamic Banking In Malaysia And Yemen.
Paper presented at Asian Forum On Business Education
(AFBE).
2
Abdul Rahman Zahari, Adnan Abd Hamid, Hamiza
Jamaludin & O. Chin. (2012, July). Inclination Factors Of
Entrepreneurship Education Program: An Experience Of
Higher Learning Institution. Paper presented at the 16th
Asian Forum On Business Education (Afbe): Emerging
Trends For Sustainability In Global Business Opportunities
& Challenge, Putrajaya, Malaysia.
3
Abdul Rahman Zahari, Elinda Esa & Inaliah Mohd Ali.
(2012, Oct). Generating Brand Equity Through Corporate
Social Responsibility (CSR): Malaysian Banking Institutions
Vs Malaysian Mobile Telcos’. Paper presented at the 2nd
International Conference On Accounting, Business And
Economics (ICABEC2012).
4
Abdul Rahman Zahari, Elinda Esa, Inaliah Mohd. Ali.
(2012, July). Carbon Foorprint Calculator: Exploring
Carbon Emission Measurement Tool Of Malaysian
Telecommunication Industry. Paper presented at the 16th
& Challenge, Kuala Lumpur, 9-10 July.
5
57 Suzaida Bakar & Muhammad Zuhairi Abd Hamid. (2012).
Validating A Bankruptcy Prediction By Using Naive Bayesian
Network Model: A Case From Malaysian Firms. Proceedings
of 2012 International Conference On Economics, Business
Innovation (ICEBI2012).
Aerni Isa, Mohd Zainal Munshid Harun, Nur Lyana Baharin,
Rusinah Siron & Raja Faridah Raja Muhammad Fauzi.
(2012, July). The Influence Of Human Capital Management
On Employee Engagement In Banking Institutions. Paper
presented at the 16th Asian Forum On Business Education
(Afbe): Emerging Trends For Sustainability In Global
Business Opportunities & Challenge, Putrajaya, Malaysia.
6
58 Suzaida Bakar, I. W. K. Ting & Annuar Md Nassir. (2012).
Examining And Validating A Bankruptcy Predictions Models
In Malaysia. Proceedings of International Conference
Ahmad Alsaqr & Mahmoud Khalid Almsafir. Drivers Of
Green Buildings In Malaysia: A Review. Paper presented
at International Conference On Business Infrastructure
(ICBI).
7
Alhana Binti Othman & Norazam Bin Mastuki. (2012, Feb).
Earnings Management In The Distressed Companies: A Study
53 Nur Lyana Baharin, Juraifa Jais & Mafuzah Mohamad.
(2013). Exploring The Retention Of Malaysian Women
Workforce Through Work-Life Balance Policies. Proceedings
Nasional, Pahang.
54 Nurul Huda Ahmad Razali & Noraini Ismail. (2013). Anti
Money Laundering And Terrorism Financing: An Overview
Of Bank Negara And Securities Commission Guidelines.
55 Rusnita Alimun, Mahiah Said & Zurina Ismail. (2013).
Understanding Level Energy Conservation Among Students
Of Malaysian Higher Learning Institution. Proceedings of
Nasional, Pahang.
56 Rusnita Alimun, Mohamad Ishak Mohamad Ibrahim,
Suhaida Mohd. Sood, Yuzainee Md Yusoff & Roslina
Ab Ghapar. (2013). Development Of Key Performance
Indicators For Academic Staff: A Case Study In Uniten.
Proceedings of the International Conference On Teaching
And Learning Education 2013 (Ictle’13) on 21-22 May at
Renaissance Hotel, Melaka, Malaysia (pp. 391-400).
135
On PN17 And Amended PN17 Companies. Paper presented
at The 2012 International Conference On Governance And
Accountability.
8
9
Alhana binti Othman, Nurul Nadiah binti Ahmad &
Izzatul Ussna binti Ridzwan. (2012, July). Discretionary
Current Accrual Of Distressed Companies Of Malaysia.
Paper presented at the 16th Asian Forum On Business
Education (Afbe): Emerging Trends For Sustainability In
Global Business Opportunities & Challenge, Putrajaya,
Malaysia.
Azleen Ilias, Mohd Aliff Haiqal Mohd Razib & Mohd Amirul
Khamil Mohd Khusairi. (2012, Sep). The Investigation Of
Perception Towards Accrual Accounting Adoption: A Case
On Malaysian Accountant General Department. Paper
presented at the International Public Sector Conference
(IPSC 2012), Kota Kinabalu, Sabah
10 Azleen Ilias, Mohd Zulkeflee Abd Razak, Nek Kamal Yeop
Yunus & Siti Fara Fadila Abd Razak. (2012, Dec). How
Accounting Students Perceived Towards Teamwork Skills.
Paper presented at the 2nd International Conference On
Education And Information Management (ICEIM2012).
11 Azleen Ilias & Mohd Zulkeflee Abd Razak. (2012, July). Do
Final Year Accounting Students Experiencing Communication
Apprehension (CA)? Paper presented at the 16th Asian
Forum On Business Education (Afbe): Emerging Trends
For Sustainability In Global Business Opportunities &
Challenge, Putrajaya, Malaysia.
12 Azrina Mohd Remali, Zuraini Abdullah Zawawi, Adnan
Abd Hamid & Khairul Nizam Surbaini. (2012, July). A
Study Of The Approaches Of Learning Among Accounting
And Business Students In Higher Education Instituion.
Malaysia.
Korea. Paper presented at Sibr-Unikl 2013 Kuala Lumpur
Conference, Kuala Lumpur, Malaysia.
20 Eid M. Al-Mohammed & Basheer Abbas Al-Alak. (2012,
July). The Role Of Digital Marketing In Higher Education
Institutions (Heis): The Case Of Saudi Arabia Students’
University Selection In Malaysia. Paper presented at Asian
Forum On Business Education (AFBE).
21 Elinda Esa, Abdul Rahman Zahari & Inaliah Mohd. Ali.
(2012, July). Corporate Social Responsibility Disclosure In
Malaysia: A Study Of The Financial Sector. Paper presented
at the 16th Asian Forum On Business Education (Afbe):
Emerging Trends For Sustainability In Global Business
Opportunities & Challenge, Putrajaya, Malaysia.
22 Fadhilah Hana Lestari, Zainal Ariffin Ahmad & Mahmoud
Khalid Almsafir. Implementating Smart Grid Technology In
The Langkawi Island: A Proposed Study. Paper presented
at International Conference On Business Infrastructure
(ICBI).
23 Fatimah Hanim Abdul Rauf, Che Wan Noraisyah Che Wan
Mohamad Yusop, Lisa Fatin Mohd Izhar & Noor Farziani
Mahamad Fazil. (2012, July). Corporate Governance And
Timeliness Of Corporate Internet Reporting By Malaysian
Listed Companies. Paper presented at the 16th Asian
24 Fatimah Hanim Abdul Rauf, Nor Hasimah Johari, Sharifah
Buniamin & Noor Raida Abd Rahman. (2012, February). The
Impact of Company and Board Characteristics on Earnings
Management: Evidence from Malaysia. Paper presented at
Asia-Pacific Business Research Conference.
13 Basheer Abbas Al-Alak & Ahmad Salih Mheidi Alnaser.
(2012, July). E-Service Quality: Conceptual Approach. Paper
presented at Asian Forum On Business Education (AFBE).
25 Fatini Hanim binti Mohamed Taufek, Nurul Huda binti
Ahmad Razali. (2012, July). Black Box Model Of Human
Resources: Linkages Between Job Characteristics And
Attitude Towards Job Decision Making. Paper presented
14 Basheer Abbas Al-Alak & Mohammed Abdulellah Yousuf
Saeed. (2012, July). SMS-Based Mobile Marketing In
Malaysia Youth Market: A Conceptual Approach. Paper
26 Fatini Hanim Mohamed Taufek. (2012, July). Strategy,
Structure & Performance Of Halal Certification In Foodservice
Industry, Selangor. Paper presented at the Asian Forum
On Business Education.
15 Basheer Abbas Al-Alak & Tareq Luay Lilo Al-Ameri. (2012,
July). Bridging The Gap Between R&D-Marketing In The
Pharmaceutical Industry In Malaysia. Paper presented at
Asian Forum On Business Education (AFBE).
27 Ghazala Haider & Zainal Ariffin Ahmad. (2012, Sep).
Emotional Intelligence As A Moderator In The Relationship
Between Interactional Justice (IJ) And Interpersonal Work
Deviance (IWD). Paper presented at 2nd Southeast Asia
Psychology Conference 2012.
16 Basheer Abbas Al-Alak. (2012, Apr). Marketing Intelligence
And Competitive Advantage: The Real Challenge. Paper
presented at the Business Intelligence And Knowledge
Economy.
17 Cheah, Y. Y., Ken, S. T. T. & Colin, E. (2012, July). The
Significance Of Emotional Intelligence In Influencing Leaders
Transformational Leadership Style. Paper presented at the
16th Asian Forum On Business Education (Afbe): Emerging
18 Cheah, C. & Ken, S. T. T. (2013, Apr). The Effects Of Ei On
Counterproductive Work Behaviors And Organizational
Citizenship Behavior. Paper presented at the Ascent 2013.
19 Christine Cheah & Ken, S. T. T. (2013, Feb). Culture
Dimensions Comparison: A Study Of Malaysia And South
136
28 Hamidah Ramlan, Norfhadzilahwati Rahim & Azrol Syazuan
bin Aziz. (2012, July). Capital Structure: Asset Tangibility,
Profitability, Growth Opportunities And Firm Size Relation
With Firm Debt (Properties Sector). Paper presented at the
29 Hamidah Ramlan, Rositah Bakar & Ahmad Fairuz Bin Long.
(2012, July). Impact Of Exchange Rate Movement On Foreign
Direct Investment Flows In Malaysia. Paper presented
30 Hussain Ali Bekhet & Ali Matar. (2012, July). Causality
Of Macroeconomic Variables Impacting The Stock Market
Index: Time Series Approach In Amman Stock Exchange.
Paper presented at Asian Forum On Business Education
(AFBE).
31 Hussain Ali Bekhet & Mohamed Ibrahim Mugableh. (2012,
July). Assessing The Equilibrium Relationships Between
Macroeconomic Variables And The Malaysian Stock Market:
Bounds Statistics Methodology. Paper presented at Asian
32 Hussain Ali Bekhet & Nor Hamisham Binti Harun. (2012,
July). Analyzing Elasticities And The Relationship Among
Construction Production Determinants In Malaysia. Paper
33 Hussain Ali Bekhet & Nor Salwati Othman. (2012, July).
Assessing The Impact Of Expansionary Fiscal Policy On
Malaysia Economy: A Co-Integration Analysis. Paper
34 Hussain Ali Bekhet & Raed Walid Al-Smadi. (2012, July).
Exploring The Relationships Among FDI Determinants
Evidence From Jordan. Paper presented at Asian Forum
On Business Education (AFBE).
35 Hussain Ali Bekhet & Shorouq Fathi Kamel Eletter. (2012,
July). Credit Risk Management For The Jordanian Commercial
Banks: Business Intelligence Approach. Paper presented
at Asian Forum On Business Education (AFBE).
36 Hussain Ali Bekhet & Tahira Yasmin. (2012, July). Economic
Growth And Pollutant Emission In Malaysia: An Empirical
Analysis Of Environmental Kuznets Curve. Paper presented
37 Hussain Ali Bekhet, Basheer A. Al-Alak & Ghaleb Awad ElRefae. (2012, July). Marketing Feasibility Of Malaysian EcoProducts. Paper presented at Annual B&ESI, International
Conference, Salzburg, July 6-9.
38 Hussain Ali Bekhet. (2012, Apr). Forming Financial Backups
Through Intelligence Systems. Paper presented at Business
Intelegence And Knowledge Economy, Amman, Jordan.
39 Ibrahim Zahari & Adel Mohamed Ali Shurbagi. (2012,
Sep). The Relationship Between Organizational Culture
And Job Satisfaction In National Oil Corporation (NOC) Of
Libya. Paper presented at International Conference On
Arts, Management And Law (ICAML) 2012.
40 Ibrahim Zahari & Asokan Vasudevan. (2012). The
Factors Influencing Employee Response Towards Change
Management In The Multinational Semiconductor Operating
In Malaysia. Paper presented at International Conference
On Business Infrastructure (ICBI).
41 Ibrahim Zahari & Chiew, M. L. (2012, July). The Effect Of
And Gas Sector In Malaysia. Paper presented at Asian
42 Ibrahim Zahari & Adel Mohamed Ali Shurbagi. (2012, Oct).
The Relationship Between Transformational Leadership
And Organizational Culture In National Oil Corporation
Of Libya. Paper presented at International Conference
On History, Literature And Management (ICHLM) 2012,
Dubai, October 6-7, 2012.
43 Irene Ting Wei Kiong & Lean, H.H. (2012, June). Government
Owned And Privately Owned Firms: Which Create More
Values In Malaysia? Paper presented at 14th Malaysian
Finance Conference 2012.
44 Irene Wei Kiong Ting & Lean, H.H. (2012, July). Testing
Trade Off And Pecking Order Theory Of Capital Structure
In Malaysia. Paper presented at the 16th Asian Forum
On Business Education (Afbe): Emerging Trends For
Sustainability In Global Business Opportunities &
45 Irene Wei Kiong Ting, Suzaida Bakar & Lean, H.H. (2012,
Oct). Leadership Control Structure And And Debt Financing
Decision: Theory And Evidence. Paper presented at 3rd
Terengganu International Business And Economics
Conference 2012 (TIBEC III).
46 Izzatul Ussna Ridzwan, Intan Salwani Mohamed & Nurul
Nadiah Ahmad. (2012, February). Factors for Security
Controls Implementation in Computer-Based Accounting
System: Malaysian Service Industry. Paper presented at
2nd Accounting Research Education Conference.
47 Juliana Anis Ramli & Elinda Esa. (2012, Oct). Examining
The Effect Of Board Characteristics Towards The Directors’
Remuneration Disclosure: Compliance To The Green Book Of
Malaysian Government-Linked Companies. Paper presented
at the International Conference Of Management, Economics
And Finance.
48 Juliana Anis Ramli, Fatimah Hanim Abdul Rauf & Mohd.
Ismail Ramli. (2012, July). Board Characteristics And The
Quality Of CG Disclosure From An Agency Perspective:
Malaysian Evidence. Paper presented at the 16th Asian
49 Juliana Anis Ramli, Mohd Rizuan Abdul Kadir, Khairul
Nizam Surbaini & Zulkifli Zainal Abidin. (2012, July).
Perception Towards An Internship Program: An Empirical
Study Of Accounting Undergraduates Among Malaysian
Higher Education Institutions. Paper presented at Asian
50 Juliana Anis Ramli, N. Geethaanjali, Rasvinder Kaur & V.
Thurka. (2012, Oct). Assessing The Effect Of Ownership
Structures On The Internet Financial Reporting (Ifr)
Disclosure: Malaysian Evidence. Paper presented at the
International Conference Of Management, Economics
And Finance.
51 Khairul Nizam Surbaini, Abdul Rahman Zahari & Elinda
bt Esa. (2012, July). Shopping Behavior And Determinant
Factors Of Mall Patronage Among Gen Y. Paper presented
52 Lee, S. F., Mohammad Izzat Amir Abdul Ghani, Adrian
Alphonsus, Prasanth Nair Sasedharan. (2012, July). An
Empirical Study On Directors’ Remuneration In Relation
To Corporate Performance: A Comparison Between
GLCs And Non-GLCs. Paper presented at the 16th Asian
53 Mahlindayu Tarmidi @ Tokhid, Azwan Abd Rashid & Rusli
Abdul Roni. (2012, March). Exploring The Approaches For
Cobit Process In Malaysian 100 Top Corporate Governance
Companies. Paper presented at 3rd International
Conference On Business And Economic Research (ICBER).
137
54 Mahmoud Khalid Almsafir, Ayman Abdal-Majeed & Ahmad
Al-Smadi. (2012, Apr). Murabahah Versus Interest Rate, The
Effects On Global Financial Crisis: A Review. Paper presented
at Business Intelegence And Knowledge Economy, Amman,
Jordan.
55 Maimun Abdullah, Norfaizah Mat Nor, Noraini Ismail
& Gevaseelan Kanasan. (2012, July). Syariah Compliant
Products And Services Preferred By Customer. Paper
64 Mohd Zainal Munshid bin Harun, Othman Chin, Shahrul
Nizam Salahudin & Mohd Yunus Majid. (2012, July). The
Relationship Of Idealized Influence, Inspirational, Motivation,
Intellectual Stimulation, Individual Consideration and
Organizational Performance. Paper presented at the 16th
56 Marziana Hj. Mohamad, Erdawani Fatin Rahmat, Nabila Huda
Shamsul Anuar & Nur Liyana Muhammad Adnan. (2013,
Mar). Tax Morale Effects Tax Compliance Of Small Medium
Enterprise (Sme): Evidencve From Tax Practitioners. Paper
presented at the Fourth Ppspp International Conference
2013, UKM, Malaysia.
65 Mohd Zulkeflee Abd Razak & Azleen Ilias. (2012, July).
Expectation Towards Mcdonald’s Malaysia: A Study
On Service Quality. Paper presented at the 16th Asian
57 Marziana Mohamad, Abdul Hadi Abdul Aziz, Muhammad
Amir Zainuddin & Sheikh Mohd Iszuan Sheikh Mohd Zurid.
(2012, July). Small Business Taxpayers Behavior, Belief
And Perception Of Fairness: Evidence From Tax Practices
In Kuantan, Pahang. Paper presented at the 16th Asian
66 Nor Edi Azhar Mohamad & Noriza Mohd Saad. (2012, Oct).
The Anatomy Of Cost Of Capital From Syariah Compliance
Securities In Bursa Malaysia Main Market. Paper presented
at the International Conferenece Of Business Infrastructure
2012.
58 Marziana Mohamad, Wan Mohammad Taufik Wan Abdullah
& Mohmad Sakarnor Deris. (2012, July). Audit Delay And
Accountability Index In Local Authorities: Cases From Kedah,
Perak And Kelantan. Paper presented at the 16th Asian
59 Masdiah Abdul Hamid & Norlaila Mazura Haji Mohaiyadin.
(2012, July). Effectiveness Of Audit Committee, Management
Ownership And Malaysian Auditor Independence. Paper
60 Mohd Faiz Salim & Zainal Ariffin Ahmad. (2012, Aug). Risk
Perception Of Nuclear Power In Malaysia. Paper presented at
Nuclear Science, Technology And Engineering Conference
2012.
61 Mohd Firdaus Al-Bakri Romli, Nadiah Firdaus Mohd
Firdaus & Mahlindayu Tarmidi @ Tokhid. (2012, July). The
Perceived Effectiveness Of Computerized Accounting System
In Accounting Process; Focus On SME. Paper presented
62 Mohd Rizuan Abdul Kadir & Fatimah Hanim Abdul Rauf,
Darshaini G. Sandrasageran, Dhayalan Sakirapani &
Sagunthalah Muttusamy. (2012, July). The Determinants Of
Students’ Decision In Choosing Islamic Accounting Course
In Universiti Tenaga Nasional Malaysia. Paper presented
63 Mohd Rizuan Abdul Kadir & Norlaila Mazura Hj.
Mohaiyadin, Mohamed Ariff Jame’an, Muzrifah Mohamed
& Norsheilla Maulad Jamaluddin. (2012, July). Relationship
Of Fraud Triangle Model And Academic Dishonesty: Some
Malaysian Evidence. Paper presented at the 16th Asian
138
67 Nor Edi Azhar Mohamad & Thilagavathi Veloo. (2012,
July). Firm Characteristics And Its Effect On Stock Return.
Global Business Opportunities & Challenge, Kuala Lumpur,
9-10 July, Putrajaya, Malaysia.
68 Nor Hamisham Harun, Nor Salwati Othman, Nik Fanidautty
Nik Abdul Majid, Mohamad Sukiman Ishak & Muhammad
Anuar Adnan. (2012, July). Exploring Awareness Of Energy
Usage Amongst The Consumers In Malaysia. Paper presented
69 Nor Razuana Amran & Angappan @ Chockalingam
Regupathi. (2012, July). Impact Of Blockholder Ownership
And Dividend Payout On Government-Linked Companies’
(Glcs’) Value In Malaysia. Paper presented at the 16th
70 Nor Salwati Othman, Nik Fanidautty Nik Abdul Majid, Nor
Hamisham Harun, Muhammad Anuar Adnan & Mohmad
Sakarnor Deris. (2012, July). Investigating The Prospect
Of Offering Master Of Science In Sustainable Energy
Management Programme At Universiti Tenaga Nasional
(UNITEN), Malaysia. Paper presented at the 16th Asian
71 Nora Yusma Mohamed Yusof & Nurul Wahilah Abdul Latif.
(2013, Apr). Analyzing the Short Term Effects of Oil Price
Changes on Income and Price Elasticity of Energy Demand
in Malaysia: Energy Policy Implications. Paper presented
at ICEBM, Kuala Lumpur, Malaysia.
72 Nora Yusma Mohamed Yusuf & Nurul Wahilah Abdul Latif.
(2012, Oct). Long Term Effects Of World Oil Prices Changes
On Income And Price Elasticity Of Energy Demands: Evidence
For Malaysia. Paper presented at the 2nd International
Conference On Accounting, Business And Economics
(ICABEC2012).
73 Noraina Mazuin Sapuan, Mohammad Rahmdzey Roly
& Khalid Abdul Rahman. (2012, Oct). Analyzing Carbon
Dioxide Emissions From Energy Resources. Paper presented
at the 3rd Terengganu International Business And
Economics Conference.
74 Noraina Mazuin Sapuan & Mohammad Rahmdzey Roly.
(2012, July). Shuratic Process And Optimal Mudarabah
Investment. Paper presented at the 16th Asian Forum
75 Noraini Ismail, Rositah Bakar, Norfaizah Mat Nor, Nurul
Huda Ahmad Razali & Farah Damira Alias. (2012, July).
Measuring The Relationship Between Market Return And
Islamic Equity Fund: A Case Of Public Mutual Berhad,
Malaysia. Paper presented at the 16th Asian Forum
76 Norfaizah Mat Nor, Maimun Abdullah, Noraini Ismail,
Rositah Bakar & Siti Sarah Mohd Yusni. (2012, July). A Study
On The Customer Awareness Toward Ar Rahnu Scheme At
Sungai Buloh, Selangor. Paper presented at the 16th Asian
77 Norfhadzilahwati Rahim & Hamidah Ramlan. (2012, July).
The Relationship Between Exchange Rate And Economic
Growth In Malaysia: Identifying Major Contributing Factors.
Malaysia.
78 Norfhadzilahwati Rahim & Zahiruddin Bin Ghazali.
(2012, July). Dividend Policy And Earnings Management:
An Exploratory Study Between Pre And Post Changing
A Company Name That Listed In Bursa Malaysia. Paper
79 Noriza Mohd Saad & Nor Edi Azhar Mohamad. (2012,
March). Sukuk In Malaysian Capital Market. Paper presented
at 3rd International Conference On Business And Economic
Research (ICBER).
80 Noriza Mohd Saad, Nor Razuana Amran & Khairi Safwan
Mohd Shaufi. (2012, July). Performance Of Levered And
Unlevered Firms In Malaysia. Paper presented at the 16th
81 Noriza Mohd Saad, Norfhadzilahwati Rahim & Nor Awanis
Binti Mohd Rozali. (2012, July). Performance Of Biotech
Firms In Emerging Market Across Countries. Paper presented
82 Noriza Mohd Saad. (2012, July). Malaysian Crude Palm Oil
Futures Trading In Derivatives Market. Paper presented
at Asian Forum On Business Education (Afbe): Emerging
83 Noriza Mohd Saad & Mohd Nizal Haniff. (2013, May). The
Effects Of Sukuk Towards Issuer’s Market Valuation. Paper
presented at the International Accounting And Business
Conference ICEBM, Johor, Malaysia.
84 Norkhazimah Ahmad, Lee, K. V., Muhammad Sufiyan
Mohd Salleh & Toh, C. Z. (2012, July). The Compliance
Of Governance And Transparency Index (GTI) In Malaysia:
Evidence Of The Plantation Sector. Paper presented at the
85 Norlaila Mazura Mohaiyadin, Masdiah Abdul Hamid
& Alhana Othman. (2012, July). Association Of English
Communication, Assessment Methods And Prerequisite
Knowledge Of Students Towards Accounting Students’
Performance At Universiti Tenaga Nasional (UNITEN).
Malaysia.
86 Norlaila Mazura Mohaiyadin. (2012, July). Relationship Of
Effective Teaching Methods And Instructor Characteristics
Towards Accounting Students’ Performance At Universiti
Tenaga Nasional (UNITEN). Paper presented at the 16th
87 Normaisarah Abdul Manaf, Nazirah Hassan, Maimun
Abdullah & Azimah Amiruddin. (2012, July). Assessing The
Factors That Affect Public’s Intention To Invest In Insurance.
Paper presented at Asian Forum On Business Education,
9 July.
88 Normaisarah Abdul Manaf & Noraini Ismail. (2012, July).
Assessing The Malaysian Public Listed Bank Performance:
Profitability Ratios Analysis. Paper presented at Asian
Forum On Business Education, 9 July.
89 Nurul Huda Ahmad Razali, Noraini Ismail & Zeittey Karmila
Kaman. (2012, July). Takaful Claims In Malaysia: To What
Extent Is The Consumer Being Protected? Paper presented
90 Nurul Huda Ahmad Razali & Fatini Hanim Mohamed Taufek.
(2012, July). Challenging Of Protection Of Traditional
Knowledge (TK) And Genetic Resources (GR) In Asean
Developing Countries (A Legal Critical Study On The Current
Law Of Malaysia). Paper presented at the 16th Asian
91 Nurul Nadiah Ahmad & Nor’Azam Mastuki. (2012, March).
Influences Of Board Structure In Mitigating Earnings
Management In GLCs In Malaysia. Paper presented at
2nd International Conference On Arts, Social Science &
Technology ICAST 2012.
91 Nurul Nadiah Ahmad, Intan Syafiqah Wok Azmi, Nalliz Zainal
Abidin & Syazwani Mohamed. (2012, Oct). The Influences
Of Firm Characteristics On Research And Development
(R&D) Disclosure: Evidence From Selected Industries.
Accounting, Business And Economics (ICABEC2012).
92 Nurul Nadiah Ahmad, Muhamad Hadi Zulfadli Pangat,
Saiyidah Diyana Ahmad & Santer Nurfarahinas Mazlan.
(2012, Oct). The Rationale For Accrual Accounting: A
139
Case In Malaysian Accountant General’S Department.
Accounting, Business And Economics (ICABEC2012).
Differentiation Advantage, And Organizational Perforamce
In The Banking Industry. Paper presented at Asian Forum
On Business Education (AFBE).
93 Nurul Nadiah Ahmad, Nor’Azam Mastuki & Izzatul Ussna
Ridzwan. (2012, Feb). The Impact of GLCs Transformation
Policy On Board Structure and Earnings Management.
Accounting Research Conference.
105 M. Said, A. A. Hamid, S.R. Muhammad Ariff, B.A. Kadir, &
S. Md Nor. (2012, July). Examining The Consumers’ Level
Of Satisfaction And Receptivity Of Facebook’S Marketing
Messages. Paper presented at the 16th National MACFEA
Seminar 2012.
94 Nurul Nadiah Ahmad & Nor’Azam Mastuki. (2012, July).
Industry Analysis Of Accrual Management By Government
Linked Companies (GLCs). Paper presented at the 16th
95 Nurul Nadiah Ahmad & Suraya Ahmad. (2012, July). Students’
Judgment On The Ethicality In Earning Management. Paper
96 Nurul Nadiah Ahmad, Saiyidah Diyana Ahmad, Santer
Nurfarahinas Mazlan & Muhamad Hadi Zulfadli Pangat.
(2013, Apr). The Perceived Benefits For Accrual Accounting:
An Analysis In Malaysian Accountant General’s Department.
Paper presented at the 3rd International Accounting
Business Conference 2013, Johor, Malaysia.
97 Qian Long Kweh, Yee Chuan Chan & Wang, W. K. (2012,
Oct). Efficiency And Audit Fees: Evidence From The U.S.
Manufacturing Firms. Paper presented at the Terengganu
International Business And Economics Conference 2012
(TIBEC III).
98 Rositah Bakar, Norfaizah Mat Nor, Noraini Ismail &
Zulaikha Jamal. (2012, June). The Relationship Between
Working Capital Management And Profitability Of Market
Capitalization Companies As Listed In KLSE. Paper presented
99 Rusinah Siron & Mohd Amin Tasripan. (2012, June). A
Study Of Quality Of Working Life Amongst Managers In
Malaysian Industrial Companies. Paper presented at 2nd
International Conference On Management 2012.
100 Rusinah Siron, Aerni Isa & Mohd Amin Tasripan. (2012,
July). A Study Of Quality Of Working Life Amongst Employees
In Malaysian Industrial Companies. Paper presented at
Asian Forum On Business Education (AFBE).
101 Rusinah Siron, Ibrahim Zahari & Mohd Amin Tasripan.
(2012, March). Organization’s Management Culture And
Its Correlation With Behavioral Outcomes: A Case Study
Conducted At Malaysian Government Link Corporation.
Paper presented at the International Symposium On
Business And Management (ISBM 2012).
102 Rusinah Siron, Mohd Yunus Abdul Majid & Mohd Amin
Tasripan. (2012, June). A Study Of Workplace Stress
Amongst Managers And Administrators In Malaysian
Industrial Companies. Paper presented at 2nd International
Conference On Management 2012.
103 Rusinah Siron, Mohd Yunus Abdul Majid & Mohd Amin
Tasripan. (2012, July). A Study Of Workplace Stress Amongst
Employees In Malaysian Industrial Companies. Paper
104 Saeed (M. Z.) A. Tarabieh & Basheer Abbas Al-Alak. (2012,
July). Customer Orientation, Supplementary Services,
140
106 Shahrul Nizam Salahuddin, Suhaimi Sudin, Cheah, C.,
Zuliawati Mohamed Saad & Nazia Newaz. (2012, July).
Carbon Foorprint Calculator: Exploring Carbon Emission
Measurement Tool Of Malaysian Telecommunication
Industry. Paper presented at the 16th Asian Forum
107 Ken, S. T. T. & Cheah, Y. Y. (2012, June). Is There A Gap
Between Practitioners’ and Academicians’ Perceptions
on Business Graduates’ Competencies in Malaysia? Paper
presented at International Conference On Education &
Information Management (ICEIM2012).
108 Ken, S. T. T., Cheah, Y. Y. & Nur Shazyani Mohd Salleh. (2012,
June). Does Effectiveness Of Training Program Influenced
Teachers Job Performance? Evidence From Malaysia? Paper
presented at International Conference On Education &
Information Management (ICEIM2012).
109 Siti Fara Fadila Abd Razak, Mohd Zulkeflee Abd Razak
& Azleen Ilias. (2012, July). Matching Male And Female
Fund Managers With Different Types Of Unit Trust Funds: A
Malaysian Perspective. Paper presented at the 16th Asian
110 Siti Fara Fadila Abd Razak, Mohd Zulkeflee Abd Razak
& Azleen Ilias. (2012, July). Analyzing Liquidity Risk
Management In Malaysia Banking Sectors. Paper presented
111 Tan, K. L. (2012, July). The Effects Of Self-Efficacy On The
Development Of Entrepreneurial Intention. Paper presented
112 Yee, C. C., Qian, L. K. & Wang, W. K. (2012, Oct). The Effects
Of Firm Efficiency And Production Decisions On Inventory
Write-Down: Evidence From Taiwanese Manufacturing
Companies. Paper presented at the 3rd Terengganu
International Business And Economics Conference 2012
(TIBEC III).
113 Zaifudin Zainol, Rashidah Abdul Rahman, Shahrul
Suhaimi Ab. Shokor & Afdzal Aizat Ramli. (2012, July).
The Relationship Between Firm Characteristic And Corporate
Governance Mechanism With Firm’s Intellectual Capital
Disclosure In Malaysian Initial Public Offerings. Paper
114 Zaifudin Zainol & Rashidah Abdul Rahman. (2012, Feb).
Determining the level of intellectual capital disclosure in
Malaysian initial public offerings. Paper presented at 2nd
Accounting Research & Education Conference (AREC)
2012.
115 Zainal Ariffin Ahmad, Hakim Hsoonee Magroud Almayali,
Zulfadli Ahmad, Azura Abdul Rahim & Nurhisham Othman.
(2012, Sep). Leadership Behavior, Emotional Intelligence
And Job Satisfaction Of Malaysian Academicians. Paper
presented at 2nd Southeast Asia Psychology Conference
2012.
116 Zinatul Iffah Abdullah, Mahmoud Khalid Almsafir & Ayman
Abdal-Majeed Al-Smadi. Transparence And Reliability In
The Financial Statement: Do They Exist? Evidence From
Malaysia. Paper presented at International Conference
On Business Infrastructure (ICBI).
117 Zulfadli Ahmad & Zainal Ariffin Ahmad. (2012, Sep). Health
Effects Of Uranium On Humans: Psychological Implications
From Fukushima. Paper presented at 2nd Southeast Asia
Psychology Conference 2012.
Books
1
Ibrahim Zahari. (2012). Cross-Cultural Management: A
Malaysian Perspective. Cengage Learning Asia.
2
Masdiah Abdul Hamid. (2012). Influence Of Corporate
Governance (CG) Mechanism On Audit And Non-Audit Fees.
Saarbrucken, Deutschland: LAMBERT Academic Publishing
(LAP).
3
Zainal Ariffin Ahmad. (2012). Beyond Theory - What It
Takes To Be An Effective Teacher: My Experiences As A
Business Educator. The Quest For Teaching Excellence.
Universiti Sains Malaysia.
Others
1
Azrinawati Mohd Remali, Hasmaizan Hassan, Inaliah
Mohd Ali, Juliana Anis Ramli & Marziana Mohamad. (2012,
July). ABAB113 Business Accounting, Module Business
Accounting – Franchise (2nd ed.).
2
Ibrahim Zahari. (2012). Human Capital Development Plan
In Malaysia From The Perspective Of Your Industrial. Paper
presented at SOBI Lecture Series (Part 1), Kuala Lumpur.
3
Ibrahim Zahari. (2012). Instilling Organizational Culture
Among Malaysian Employees: The Case Of Matsushita
Malaysia From HR Perspective. Paper presented at SOBI
Lecture Series (Part 1) , Kuala Lumpur.
4
Noor Raida Abd Rahman, Izyan Zahirah Bt Ishak, Nurfadzrini Binti Ramali. (2012, July). Capital Structure And
Environmental Reporting Practices Of Malaysian Companies.
Paper presented at Asian Forum On Business Education.
5
Rashidah Abdul Rahman, Wan Mohammad Taufik Bin
Wan Abdullah. (2012). Social Networks And Directors
Remuneration Determination: Malaysian Evidence, A
Technical Report To Institut Bank-Bank Malaysia (IBBM)
(pp. 1-34).
141
Journals
1
2
3
4
5
6
7
8
9
A. Ahmad, M. Y. A. Rahman & M. S. Su’ait. “Morphological,
Infrared And Ionic Conductivity Studies Of Poly(Ethylene
Oxide)-49% Poly(Methyl Methacrylate) Grafted Natural
Rubber-Liclo4 Based Solid Polymer Electrolyte.” Journal
Of Applied Polymer Sciences, vol. 124, pp. 4222-4229, Mar.
2012.
A. Ahmad, M.Y.A. Rahman, H. Harun, M.S. Su’ait & M.A. Yarmo.
“Preparation and Characterization of 49% Poly(Methyl
Methacrylate) Grafted Natural Rubber (MG49)–Stannum
(IV) Oxide (SnO2)–Lithium Salt Based Composite Polymer
Electrolyte.” International Journal Of Electrochemical
Science, vol. 7, pp. 8309-8325, Sep. 2012.
A. Ahmad, S.P. Low, F. S. A. Almakhzoom & M. Y. A. Rahman.
“Effect Of Propylene Carbonate On Ionic Conductivity Of
Mg49-Tio2-Liclo4 Composites Polymer Electrolytes.”
Advanced Materials Research, vol. 501, pp. 44-48, Apr.
2012.
A. A. Umar, M.Y.A. Rahman, R. Taslim & M. M. Salleh. “DyeSensitized Solar Cell Utilizing Quasi One-Dimensional of
Highly Compact Vertical Array ZnO Nanorod.” International
Aug. 2012.
A. A. Umar, M.Y.A. Rahman, R. Taslim, M.M. Salleh & M.
Oyama. “Effect Of The Thickness Of Quasi One-Dimensional
Zinc Oxide Nanorods Synthesized Via Multiple Growth
Process Under Ammonia Assisted Hydrolysis Technique
For Dye-Sensitized Solar Cell.” International Journal Of
Abdulra’uf, Lukman Bola, M. K. Chai & G. H. Tan.
“Applications Of Solid Phase Microextraction For The
Analysis Of Pesticide Residues In Fruits And Vegetables:
A Review.” Journal Of AOAC International, vol. vol. 95, (5),
pp. 1272-1290, Oct. 2012.
Abeer A. Alhadi, Shayma A. Shaker, Nura Suleiman G.,
Wagee A. Yehye & Hapipah Mohd Ali. “Preparation,
Spectroscopic Characterization Of A New Cd(Ii)
Complex Containing Tridentate Nno Schiff Base
Derived And X-Ray Crystallographic Structural Study Of
3,4,5-Trihydroxybenzoic Acid[1-(Pyridyl)-Ethylidene]
Hydrazone.” J. Chil. Chem. Soc., Vol. 57, (3), Jun.
2012. Available: http://dx.doi.org/10.4067/S071797072012000300018 Abeer A. Alhadi, Shayma A. Shaker, Nura Suleiman G.,
Wagee A. Yehye & Hapipah Mohd Ali. “Preparation,
Spectroscopic Characterization Of A New Cd(Ii)
Complex Containing Tridentate Nno Schiff Base
Derived And X-Ray Crystallographic Structural Study Of
3,4,5-Trihydroxybenzoic Acid[1-(Pyridyl)-Ethylidene]
Hydrazone.” J. Chil. Chem. Soc., Jun. 2012.
Abeer A. Alhadi, Shayma A. Shaker, Wagee A. Yehye,
Hapipah Mohd Ali & A. Abdullah. “Synthesis, Magnetic
And Spectroscopic Studies Of Ni(Ii), Cu(Ii), Zn(Ii) And Cd(Ii)
Complexes Of A Newly Schiff Base Derived From 5-Bromo2-Hydroxybezylidene)-3,4,5-Trihydroxybenzohydrazide.”
Bull. Chem. Soc. Ethiop, vol. 26(1), pp. 95-101, Jan. 2012.
10 Abu Bakar Musa. “Predicting Wave Motion In Viscoelastic
Rods Using Limit Theorem In Laplace Transform(Standard
Linear Solid Model).” Journal Of Mathematics And System
Science, Apr. 2012.
142
11 Akrajas Ali Umar, Mohd Yusri Abd Rahman, Siti Khatijah
Md Saad & Muhamad Mat Salleh. “Effect of NH3
Concentration on the Performance of Nitrogen doped
TiO2 Photoelectrochemical Cell.” International Journal
Of Electrochemical Science, vol. 7, pp.7855-7865, Sep.
2012.
12 Alicia Philip, Jayakaran Mukundan & Vahid Nimehchisalem.
(2012). Conjunctions In Malaysian Secondary School
English Language Textbooks. International Journal Of
Applied Linguistics & English Literature, 1(1).
13 E. M. Fahmi, A. Ahmad, M. Y. A. Rahman & H. Hamzah.
“Effect Of Nio Nanofiller Concentration On The Properties
Of Peo-Liclo4 Composite Polymer Electrolyte.” Journal Of
Solid State Electrochemistry, vol. 16, pp. 2487-2491, Jun.
2012.
14 E. M. Fahmi, A. Ahmad, M. Y. A. Rahman & H. Hamzah.
“Effect Of Nio Nanofiller Concentration On The Properties
Of Peo-Liclo4 Composite Polymer Electrolyte.” Journal Of
Solid State Electrochemistry, vol. 16, pp. 2487-2491, Jun.
2012.
15 E. M. Fahmi, A. Ahmad, N. N. M. Nazeri, H. Hamzah, H. Razali
& M. Y. A. Rahman. “Effect Of Libf4 Salt Concentration
On The Properties Of Poly(Ethylene Oxide)-Based
Electrochemical Science, vol. 7, pp. 5798-5804, Jul. 2012.
16 H. A. Alwi, L. S. Ewe, Zahari Ibrahim, N.B. Ibrahim & R.
Abd-Shukor. “Thermal Diffusivity And Conductivity Of
La0.7Ca0.3-Xsrxmno3 (X= 0 To 0.1).” Advanced Materials
Research, vol. 501, pp. 319-323, Apr. 2012.
17 Hawanum Hussein & Arshad Abd Samad. (2012). Using
Collaborative Problem Solving To Help Efl Learners To
Write Academic Essays. Scottish Journal Of Arts, Social
Sciences And Scientific Studies, 3(2), 88-97.
18 Hawanum Hussein, Samsilah Roslan, Nooreen Noordin &
Maria Chong Abdullah. (2012). Using The Problem Solving
Approach To Teach Writing To EFL Learners. The English
Teacher, 12(2), 144-159.
19 Khairul Nizam Mat Karim & Suzy Aziziyana Saili. (2012).
Measuring religious leaders (Muslim - non-Muslim)
understanding on interfaith dialogue basic concept and
its effects to social relation: A preliminary. Journal Of
Islamic Knowledge, 1(2), 22-33.
20 L. S. Ewe, A. Jemat, K. P. Lim & R. Abd-Shukor. “Electrical,
Magnetoresistance And Magnetotransport Properties Of
Nd1-Xsrxmno3.” Physica B: Physics Of Condensed Matter,
Dec. 2012, doi: 10.1016/j.physb.2012.12.012
21 L. S. Ewe, R. Ramli, K. P. Lim & R. Abd-Shukor. “Electrical
And Magneto-Transport Properties Of Magneto-Resistive
La0.7Ca0.28Sr0.02Mno3 Prepared At Different Sintering
Temperature.” Sains Malaysiana, vol. 41, (5), pp. 761-768,
Apr. 2012.
22 L. S. Ewe, A. Jemat, W. N. Voon & K. P. Lim. “Influence Of
Sintering Temperature On Microstructural, Electrical And
Magnetotransport Properties Of Nd0.68Sr0.32Mno3.”
Journal Of Solid State Science And Technology, vol. 17,
Dec. 2012.
23 Lee, Y. L., Ng, Y. J., Chong, S. T. & Mohd Ariff Ahmad Tarmizi.
(2012). Code Switching In Sepet: Unveiling Malaysians’
Communicative Styles. British Journal Of Arts And Social
Sciences (BJASS), 6(2), 166-181.
24 M. Imperiyka, A. Ahmad, S. A. Hanifah & M.Y.A. Rahman.
“Role Of Salt Concentration Lithium Perchlorate On Ionic
Conductivity And Structural Of (Glycidyl Methacrylate-CoEthyl Methacrylate) (70/30) Based On A Solid Polymer
Electrolyte.” Advanced Materials Research, vol. 626, pp.
454-458, Nov. 2012.
25 M. S. Omar-Fauzee, Yudha H. Saputra, Norinda Samad,
Zeinab Gheimi, Mohd Nizam Asmuni & Mastura Johar.
(2012). Mental Toughness Among Footballers: A Case
Study. International Journal Of Academic Research In
Business And Social Sciences, 2(1), 639–658.
26 M. S. Su’ait, S. A. M. Noor, A. Ahmad, H. Hamzah & M. Y. A.
Rahman. “Preparation And Characterization Of Blended
Solid Polymer Electrolyte 49% Poly (Methyl Methacrylate)Grafted Natural Rubber:Poly(Methyl Methacrylate)-Lithium
Tetrafluoroborate.” Journal Of Solid State Electrochemistry,
vol. 16, (6), pp. 2275-2282, May 2012.
27 M. S. Su’ait, S. A. M. Noor, A. Ahmad, H. Hamzah & M. Y. A.
Rahman. “Preparation And Characterization Of Blended
Solid Polymer Electrolyte 49% Poly (Methyl Methacrylate)Grafted Natural Rubber:Poly(Methyl Methacrylate)-Lithium
Tetrafluoroborate.” Journal Of Solid State Electrochemistry,
vol. 6, pp. 2275-2282, May 2012.
28 M. Y. A. Rahman, A. A. Umar, L. Roza & M. M. Salleh. “Effect
of TiO2 nanostructure morphology on the performance
of a photoelectrochemical cell of ITO/TiO2/electrolyte/
platinum.” Journal Of Solid State Electrochemistry, vol. 16,
pp. 3947-3952, Nov. 2012.
29 M. Y. A. Rahman, A. A. Umar, L. Roza & M. M. Salleh. “Effect Of
Optical Property Of Surfactant Treated Tio2 Nanostructure
On The Performance Of Tio2 Photoelectrochemical Cell.”
Journal Of Solid State Electrochemistry, vol. 16, pp. 20052010, Apr. 2012.
30 M. Y. A. Rahman, A. A. Umar, L. Roza & M. M. Salleh. “Effect
of TiO2 nanostructure morphology on the performance
of a photoelectrochemical cell of ITO/TiO2/electrolyte/
platinum.” Journal Of Solid State Electrochemistry, vol. 16,
pp. 3947-3952, Nov. 2012.
31 M. Y. A. Rahman, A. A. Umar, L. Roza & M. M. Salleh. “Effect Of
Optical Property Of Surfactant Treated Tio2 Nanostructure
On The Performance Of Tio2 Photoelectrochemical Cell.”
Journal Of Solid State Electrochemistry, vol. 16, pp. 20052010, Apr. 2012.
32 M. Y. A. Rahman, A. Ahmad, T. K. Lee, Y. Farina & H. M. Dahlan.
“Liclo4 Salt Concentration Effect On The Properties Of
Pvc-Modified Low Molecular Weight Lenr50 Based Solid
Polymer Electrolyte.” Journal Of Applied Polymer Sciences,
vol. 124, pp. 2227-2233, Feb. 2012.
33 M. Y. A. Rahman, A. A. Umar, R. Taslim & M. M. Salleh. “Effect
Of Organic Dye, The Concentration And Dipping Time Of
The Organic Dye N719 On The Photovoltaic Performance
Of Dye-Sensitized Zno Solar Cell Prepared By AmmoniaAssisted Hydrolysis Technique.” Electrochimica Acta, vol.
88, pp. 639-643, Dec. 2012.
34 Mardian Shah Omar & Zaharani Ahmad. (2012). Isu Urutan
Dua Vokal Di Sempadan Awalan: Satu Penjelasan Analisis
Spektrografik. Jurnal Bahasa, 12(1).
35 Mariam Mohamed Nor & Ng, Y. J.. (2012). Graphic
organizer and paragraph frame to rectify tunnel vision.
Is it achievable? Global Journal Of Human Social Science,
12(4).
36 Mariam Mohamed Nor, Ng, Y. J., Abdul Halim Ibrahim,
Chong, S. T., Lee, Y. L. & Mohd Ariff Ahmad Tarmizi. (2012).
“Team teaching” in higher education: The relationship
between team norms and effectiveness. International
Journal Of Arts And Commerce, 1(1), 1-15.
37 Mariam Mohamed Nor, Ng, Y. J., Lee, Y. L., Chong, S. T. &
Mohd Ariff Ahmad Tarmizi. (2012). What They Can See,
They Can Write, Right? Global Journal Of Human Social
Sciences (GJHSS), 12 (10), 64-72.
38 Mastura J., Omar Fauzee M.S., Bahaman A.S., Rashid S. Abd.
& Hakim M.N. (2012). Effect Of Low-Impact Aerobic Dance
Exercise On Psychological Health Status In Sedentary
Women. Biology of Sport, 29(1), 63-69.
39 Mastura J., Omar Fauzee M.S., Bahaman A.S., Rashid S.
Abd. & Somchit M.N. (2012) Effect Of Low Impact Aerobic
Dance Exercise On Psychological Health (Stress) Among
Sedentary Women In Malaysia. Biology Of Sports Journal,
29 (1), 63–69.
40 N. Ataollahi, A. Ahmad, H. Hamzah, M. Y. A. Rahman & N. S.
Mohamed. “Ionic Conductivity Of Pvdf-Hfp/Mg49 Based
Solid Polymer Electrolyte.” Advanced Materials Research,
vol. 501, pp. 29-33, May 2012.
41 N. Ataollahi, A. Ahmad, H. Hamzah, M. Y. A. Rahman & N.
S. Mohamed. “Preparation And Characterization Of PvdfHfp/Mg49 Based Polymer Blend Electrolyte.” International
Aug. 2012.
42 N. N. Mobarak, N. Ramli, A. Ahmad & M. Y. A. Rahman.
“Chemical interaction and conductivity of carboxymethyl
κ-carrageenan based green polymer electrolyte.” Solid
State Ionics, vol. 224, pp. 51-57, Aug. 2012.
43 Ng, Y. J., Chong, S. T., Mariam Mohamed Nor, Mohd Ariff
Ahmad Tarmizi & Alif Fairus Nor Mohamad. (2012). Corpus
Based Analysis Of The Toefl Course Books: What Are The
Words We Should Teach Our Students? International
Review Of Social Sciences And Humanities, 3(2).
44 Ng, Y. J., Lee, Y. L., Chong, S. T., Nurhanis Sahiddan, Alicia
Philip, Noor Hafiza Nor Azmi & Mohd Ariff Ahmad Tarmizi.
Development Of The Engineering Technology Word List
For Vocational Schools In Malaysia. International Education
Research, 1 (1).
45 Nurhanis Sahiddan. (2012). Approaches to travelwriting
in Isabella L. Bird’S The Golden Chersonese and Theway
Thither. International Journal Of Applied Linguistics &
English Literature, 1(2).
46 Rika Taslim, M. Y. A. Rahman, A. A. Umar & M. M. Salleh.
“Fabrication of Photoelectrochemical Cell Using Highly
Compact Vertical Array Zno Nanorod.” Advanced Materials
Research, vol. 364, pp. 293-297, Jan. 2012.
47 T. K. Lee, A. Ahmad, Y. Farina, H. M. Dahlan & M. Y. A. Rahman.
“Preparation And Characterization Of Solid Polymeric
Electrolyte Pvc-Low Molecular Weight Lenr50(70/30)Liclo4.” Journal Of Applied Polymer Sciences, Jul. 2012.
48 T. K. Lee, S. Afiqah, A. Ahmad, H. M. Dahlan & M. Y. A.
Rahman. “Temperature Dependence On Conductivity Of
Plasticized Poly(Vinyl Chloride)-Low Molecular Weight
Liquid 50% Epoxidised Natural Rubber Solid Polymer
Electrolyte.” Journal Of Solid State Electrochemistry, vol.
16, (6), pp. 2251-2260, May 2012.
49 T. K. Lee, S. Afiqah, A. Ahmad, H. M. Dahlan & M. Y. A.
143
Rahman. “Temperature Dependence On Conductivity Of
Plasticized Poly(Vinyl Chloride)-Low Molecular Weight
Liquid 50% Epoxidised Natural Rubber Solid Polymer
Electrolyte.” Journal Of Solid State Electrochemistry, vol.
6, pp. 2251-2260, May 2012.
50 Yee, C. L., Chong, S. T. & Ng, Y. J. (2012). Evaluating The
Esl Reading Texts For Intermediate Learners Of English
From The Perspective Of Students. Global Journal Of
Human Social Science, 12(7).
51 Zaemah Jubri, Mohd Zobir Bin Hussein, Asmah Hj Yahaya
& Zulkarnain Zainal. “The Effect Of Substitution Of
Zinc With Aluminium In The Brucite-Like Layers On The
Physicochemical Properties Of Zinc-Aluminium-Layered
Double Hydroxide-Pamoate Nanocomposite.” Journal Of
Porous Materials, vol. 19, (1), pp. 45-51, Jan. 2012.
52 Zaemah Jubri, Mohd Zobir Bin Hussein, Asmah Hj Yahaya
& Zulkarnain Zainal. “The Effect Of Substitution Of
Zinc With Aluminium In The Brucite-Like Layers On The
Physicochemical Properties Of Zinc-Aluminium-Layered
Double Hydroxide-Pamoate Nanocomposite.” Journal Of
Porous Materials, vol. 19, (1), pp. 45-51, Jan, 2012.
Quantitative Analysis In Measuring Information Technology
/ Computer Studies (It/Cs) Foundation Students’ Interest And
Level Of Understanding Towards Ict And Their Perception
Towards It Degree Choice In Uniten. Proceedings of
International Conference On Quality Of Teaching &
Learning (ICQTL 2012), (pp. 118-124).
8
Yeap, E. E. L., Hawanum Hussein, Mohd Anwar Muslimen
& Mohd Ariff Ahmad Tarmizi. (2012). Excellent Students’
Voice: English Public Speaking Activities Are Fun.
Proceedings of MICELT 2012 - Aligning ELT Classroom
Practice To Real World Needs [CD], (pp. 163-168).
9
Zuraidah Ali, Mohd Nizam Mohamad, Nor Iza Mohd Rawi
& Yeap E. E. L. (2012). Why is there a Declining Interest in
Student Leadership among Undergraduates? Proceedings of
Persidangan Pembangunan Pelajar Peringkat Kebangsaan
2010 [CD].
Conferences
1
Aniza Mohamed Nor, Abd Halim bin Tamuri, Maimun
Aqsha Lubis, Nabihah Yusof, Haiza Abdullah & Siti Akhmal
Salleh @ Muhammad. (2012, Jan). Peranan Falsafah Islam
Menghadapi Globalisasi. Paper presented at the 3rd
International Conference Of Asean Studies On Integrated
Education In Islamic Studies And Civilization.
2
Faridah H. Hashim & Yeap E. E. L. (2012, Nov). Kesahan
Modul Bimbingan Kelompok Rakan Mentor Dalam Program
Mentoring Bersama Pelajar Rendah Pencapaian Akademik.
Paper presented at the 5th UPSI-UPI Conference On
Education 2012.
3
Haiza Abdullah, Maimun Aqsha Lubis, Aniza Mohamed
Nor, Nabihah Yusof & Siti Akhmal Salleh. (2012, Jan).
Sumbangan Falsafah Islam Dalam Pendidikan Bersepadu.
Paper presented at the 3rd International Conference Of
Asean Studies On Integrated Education In Islamic Studies
And Civilization.
4
Haizan Mohd Taha, Fauziah Hanim binti Jalal & Mohammad
Nasir Bistaman. (2012, Oct). Kesahan Modul Bimbingan
Kelompok Rakan Mentor Dalam Program Mentoring Bersama
Pelajar Rendah Pencapaian Akademik. Paper presented at
the 5th UPSI-UPI Conference On Education 2012.
5
Hasmaizan Hassan. (2012, July). Internet Corporate
Reporting In Malaysia: A Disclosure Of Corporate
Governance. Paper presented at the Asian Forum On
Business Education 2012.
6
Hasmaizan Hassan. (2012, July). Transformation Of
Government Accounting System In Developing Countries:
Indonesia, Thailand And Malaysia. Paper presented at the
Asian Forum On Business Education 2012.
53 Zulfadli Ahmad & Saifuddin Normanbhay. “Review On The
Removal Of Uranium From Aqueous Solution.” Journal Of
Nuclear And Related Techniologies, Jun. 2012.
54 Zuraidah Ali, Imran Ho-Abdullah & Khairul Anwar
Mastor. (2012). Undergraduate Communication Style In
Consensual Small Group Decision Making. Procedia Social
And Behavioral Sciences, 59, 612-617.
55 Zuraidah Ali. (2012). Leadership Engagement Among
Female Undergraduates. Southeast Asia Journal Of General
Studies, 13.
Proceedings
1
2
3
A.Z. Raziah, A. R. Junizah & N. Saifuddin. “Synthesis Of
Carbon Nanotubes Using Natural Carbon Precursor: Castor
Oil,” in 2nd International Conference On Fundamental And
Applied Sciences (ICFAS2012), 2012, pp. 145-149.
Abu Bakar Musa. “Predicting Wave Velocity And Stress
Of Impact Of Elastic Slug And Viscoelastic Rod Using
Viscoelastic Discontinuity Analysis (Standard Linear Solid
Model),” in The International Conference Of Applied And
Engineering Mathematics (ICAEM2012), 2012, vol. 1.
Abu Bakar Musa. “Validation Of Numerical Solution Of
Wave Propagation In Vicoeslastic Material (Standard
Linear Solid Model) Through Perturbation,” in Simposium
Matematik Kebangsaan SKSM Ke 20, 2012.
4
Hasmaizan Hassan, Sharifah Buniamin & Azrinawati
Mohd Remali. (2012). Ethics In Public Sector: An Islamic
Approach And Effects Of Unethical At Work. Proceedings
of Accounting Research And Education Conference
(AREC2012) (pp. 23-27).
5
Hawanum Hussein & Chong, S. T. (2012). What Else Can
We Do With A Poem Besides ‘Torture A Confession Out Of
It?’. Proceedings of MICELT 2012 - Aligning ELT Classroom
Practice To Real World Needs [CD], (pp. 106-109).
6
Hawanum Hussein & Yeap, E. E. L. (2012). Writing Like The
Ning Nang Nong. Proceedings of MICELT 2012 - Aligning
ELT Classroom Practice To Real World Needs [CD], (pp.
1-5).
7
Low, L. M. & Eze Manzura Mohd Mahidin. (2012).
144
7
Husni Mohd Radzi, Low, L. M., Mohd Khairuddin Mohd
Yusof, Mahd Anwar Muslimen, Yeap, E. E. L., Farhaniza
Ghazali, Noor Saliza Mohd Salleh, Nurshuhaida Mohd
Shokri & Mohd Ariff Ahmad Tarmizi. (2012, Nov).
E-Counseling, Establishment, Importance And Application
In Uniten. Paper presented at the International Conference
On Science Technology And Social Sciences 2012.
14 Rusli Abd Roni & Mahlindayu Tarmidi @ Tokhid. (2012,
March). The Application Of Maslahah Concept In Information
Technology Governance. Paper presented at the 3rd
International Conference On Business And Economic
Research (3rd ICBER 2012).
8
Mardhian Shah Omar, Marniyati Mohd Nor & Mastura Johar.
(2012, Apr). Budaya Berbahasa Perempuan Lebih Berprestij
Dan Bersistematik? Satu Penelitian Dalam Komuniti Penutur
Melayu. Paper presented at the Seminar Antarabangsa
Pembangunan Komuniti, Terengganu, Malaysia.
15 Siti Akhmal Salleh@Muhammad, Maimun Aqsha Lubis,
Nabihah Yusof, Haiza Abdullah & Aniza Mohamed Nor.
(2012, Jan). Pandangan Islam Terhadap Falsafah Pendidikan
Rekonstruksionisme Menghadapi Era Globalisasi. Paper
presented at the 3rd International Conference Of Asean
Studies On Integrated Education In Islamic Studies And
Civilization.
9
Marniyati Mohd. Nor, Mardian Shah Omar & Mastura Johar.
(2012, Apr). Membudayakan Komunikasi Dalam Komuniti
Korporat. Paper presented at the Seminar Antarabangsa
Pembangunan Komuniti (SAPKO2012).
16 Zulfadli Ahmad & Saifuddin Normanbay. “Modified
Magnetic Multiwalled Carbon Nanotubes As A Superior
Adsorbent,” presented at the National Graduate Conference
2012 (NatGrad2012), 2012.
10 Mastura Johar, Mardian Shah Omar & Marniyati Mohd.
Nor. (2012, Apr). Effect Of Low Impact Aerobic Dance
Exercise On Quality Of Life Among Overweight Working
Women. Paper presented at the Seminar Antarabangsa
Pembangunan Komuniti (SAPKO2012).
11 Mastura Johar. (2012, July). Effects Of Low Intensity Aerobic
Dance Exercise On Physiological And Psychological WellBeing Among Working Women. Paper presented at the
Asean Universities Conference On Physical Education
And Sports Science (AUCPESS).
12 Nabihah Yusof, Maimun Aqsha Lubis, Siti Akhmal Salleh@
Muhammad, Aniza Mohamed Nor & Haiza Abdullah.
(2012, Jan). Sumbangan Falsafah Pendidikan Islam Ke
Arah Menjana Modal Insan. Paper presented at the 3rd
International Conference Of Asean Studies On Integrated
Education In Islamic Studies And Civilization.
13 Nazirah Hassan, Normaisarah Binti Abdul Manaf, Maimun
Bt Abdullah, Mohd Noor Bin Mamat & Zaimah Darawi.
(2012, July). Public Perception Of The Usage Of Methyl
Ester Biodiesel In The Malaysia Transportation Sector. Paper
presented at the Asian Forum On Business Education 2012.
Books
1
Aniza Mohamed Nor & Maimun Aqsha Lubis. (2012).
Peranan Falsafah Islam Dalam Menghadapi Arus Globalisasi.
In Perbandingan Antara Falsafah Pendidikan Barat Dengan
Falsafah Pendidikan Islam.
Others
1
Chai Mee Kin & Khor, L. “Optimization Of Dispersive
Liquid-Liquid Microextraction For The Determination Of
Pesticide Residues In Vegetables,” Illumination, July 2012.
2
Saifuddin Nomanbhay, Kumaran Palanisamy & Abd Halim
Shamsuddin. “Renewable Energy-Biogas & Microhydro
Generation From Pantai STP,” presented at the 2nd
Technical Seminar On Effective Sewerage Management In
Malaysia, 2012.
145
Others
Journals
1
Rusni Hassan & Adnan Yusoff. (2012). Time Barred! Time
Threshold In Commercial Claims Under Islamic Law. Journal
Of Commonwealth Law And Legal Education, 8(2).
2
Rusni Hassan, Adnan Yusoff & Aishath Muneeza. (2012).
Legal Stains In The Malaysian Islamic Banking Practices Of
Alijarah Thumma Al-Bai’ (AITAB). World Journal Of Social
Science, 2(1).
Conferences
1
H. Basri, A. Zaharim, M. Z. Omar & M. Y. Yuzainee. (2012,
Apr). A Comparative Analysis Of Shariah Governance In
Islamic Banking Institutions Across Jurisdictions. Paper
presented at 1st International Conference on Recent Issues
in Conventional and Islamic Banking, Jami’ah al-Mu’tah,
Jordan.
2
Noorazizun Mohd Saad & Rose Alinda Alias. (2012, Dec).
New types of general consent in Telehealth application
usage. Paper presented at 2012 IEEE EMBS Conference
On Biomedical Engineering & Sciences.
3
Rusni Hassan & Adnan Yusoff. (2012, Apr). A Comparative
Analysis Of Shariah Governance In Islamic Banking
Institutions Across Jurisdictions. Paper presented at 1st
International Conference on Recent Issues in Conventional
and Islamic Banking, Jami’ah al-Mu’tah, Jordan.
Proceedings
1
Ahmad Rafdi Endut & Fatimah Kari. “Transport GHG
Inventory: A Malaysia Case Study,” in 3rd Steering
Committee Meeting On Cooperative Green Growth Modelling
Forum, Mar. 2012.
2
Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar, Azah
Mohamed, Norhamidi Muhamad & Riza Atiq Abdullah O. K.
Rahmat. (2012). Measuring Engineering Employability Skills.
Proceedings of The 8th WSEAS International Conference
On Educational Technologies (EDUTE’12).
3
Yuzainee Md Yusoff, Azami Zaharim, Mohd Zaidi Omar,
Azah Mohamed, Norhamidi Muhamad, Ramlee Mustapha
& Riza Atiq Abdullah O. K. Rahmat. (2012). Engineering
Employability Skills For Malaysian Industry: Framework
Development. Proceedings of The 8th WSEAS International
Conference On Educational Technologies (EDUTE’12).
146
Awards and
Achievements
ACHIEVEMENTS
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Assoc. Prof. Dr. Hanim Salleh
: MTE 2012, PWTC, Malaysia
16-18 Feb. 2012
: Acoustic-Based Micropower Generator
For Condition Monitoring Of Power Plant
Equipment
: Gold and Best Award
: Assoc. Prof. Ir. Dr. Norashidah Md Din
: RF Energy Harvester System
16-18 Feb. 2012
: Gold
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Assoc. Prof. Ir. Dr Lariyah Mohd Sidek
16-18 Feb. 2012
: An Innovative Erosion and Sediment Control
Expert System (ESCES)
: Silver
Inventor
Exhibition
: Dr. Mohammed Azlan Mohamed Iqbal
16-18 Feb. 2012
: Chesthetica Endgame
: Bronze & Foreign Special Award, Association of
Polish Inventors and Rationalizers , King Saud
University, Saudi Arabia
Inventor
Exhibition
: Dr. Fairuz Abdullah
16-18 Feb. 2012
: FTTH network connectivity monitoring system
: Bronze
Title
Award
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Dr. Mohamed Ansari M. Nainar
16-18 Feb. 2012
: Cnc milling process on mwcnt/epoxy
composite board
: Bronze
: Korea International Women’s Invention
Exposition(KIWIE 2012) 03-06 May 2012
: RF Energy Harvesting System
: Gold & Patent office of Republic of Poland
Special Prize
Inventor
Exhibition
: Assoc. Prof. Ir. Dr Lariyah Mohd Sidek
Exposition(KIWIE 2012)
03-06 May 2012
Title
: Eco-Friendly Lightweight Green Roof (EcoGreen Roof)
Award
: Gold
Inventor
Exhibition
Title
Award
148
: V-Gen Inertial Broadband Micropower
Generator for Perpetual Wireless Sensor Node
: Silver
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Incomplete spinal cord injury (SCI)
physiotheraphy
: Silver
: Sumayyah Idris
: A Novel Highly Sensitive Fiber Laser Pressure
Sensor
: Silver
: Sharifah Azwa Shaaya
: Energy Efficient IEEE 802.15.4 Mac Protocol for
Wireless Sensor Network
: Bronze
: Dr. Rohayu Che Omar
: Vege Waste Grout
: Bronze & International Federation of Inventors
Association Special Prize
03-06 May 2012
: Innovative Transmission Route Finder and
Monitoring Rating System
: Bronze
03-06 May 2012
: A hierarchical dynamic bandwidth allocation
for upstream EPON
: Bronze
: Dr. Khairul Salleh
: ITEX 2012, KLCC, Malaysia
17-19 May 2012
: Boiler Header Inspection Robot
: Gold
: Nurul Asyikin Mohamed Radzi
17-19 May 2012
: A Universal Dynamic Bandwidth Allocator for
Ethernet Passive Optical Network
: Gold
: Assoc. Prof. Ir. Dr. Lariyah Sidek
17-19 May 2012
: Eco-friendly Erosion and Sediment Control
System
: Gold
AWARDS and ACHIEVEMENTS 2013
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
17-19 May 2012
: Bio - Vege Grouting
: Gold
Inventor
Exhibition
: Rozita Ismail
17-19 May 2012
: Early Reading Steps for Kids
: Silver
Award
Title
Inventor
Exhibition
Title
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Ir. Dr. Kannan M. Munisamy
17-19 May 2012
: Aero-Brake-Disk
: Silver
17-19 May 2012
: Prototyping of Epoxy Nanocomposite Parts
Using CNC Milling Process
: Silver
: Adzly Anuar
17-19 May 2012
: OBE System
: Silver
: Dr. Normy Norfiza Abdul Razak
17-19 May 2012
: Applying Process Control To Human Health:
Improving Glycaemic Control In ICU and HDU
: Bronze
Inventor
Exhibition
: 2012 International Conference on Environment
and Industrial Innovation (ICEII 2012), Hong
Kong, June 2-3, 2012
Title
: Monte Carlo Analysis of a Subcutaneous
Absorption Insulin Glargine
Model: Variability in Plasma Insulin
Concentrations
Award
: Conference-Excellent Paper Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: 2012 Korea Cyber International Genius
Inventor Fair (CIGIF2012)
: A Metabolic model for glycaemic control
of critically ill patients: High predictive
performance for real-time control
: Gold
: Assoc. Prof. Dr. Vigna K Ramachandaramurthy
21-23 Feb. 2013
: Virtual instrument based power quality
recorder/analyzer
: Gold and Special Award
21-23 Feb. 2013
: Design and development of HA/PLA
bioscaffolds for tissue engineering applications
: Silver
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Dr. Siti Fazlili Abdullah
21-23 Feb. 2013
: Improvement of functional performance in
a tribotronic system through application of
nanolubricants
: Silver
: Dr. Md Ashraful Alam
21-23 Feb. 2013
: Development and application of kenaf fibre
polymer laminate for shear strengthening of
reinforced concrete structure
: Bronze
: Assoc. Prof. Dr. Ong Hang See
21-23 Feb. 2013
: In-Home M2M (Machine to Machine ) ContextAwared Platform
: Bronze
: Dr. Sivakumar Naganathan
21-23 Feb. 2013
: Green Bricks from Industrial Waste
: Bronze
: Dr. Sivadass Thiruchelvam
21-23 Feb. 2013
: A Novel Development of a Strategic Sourcing
Supplier Selection for Capital Equipment (S4–
CapEq) Decision-Making Model
: Bronze
: Assoc. Prof. Dr Mohd Azree Bin Idris
16-18 May 2013
: Mechanical Timer for Opening and Closing of
Valve
: Gold
: Assoc. Prof. Dr. Khairul Salleh Bin Mohamed
Sahari
16-18 May 2013
: Flexible docking platform and deployment
mechanism for robotic application
: Gold
16-18 May 2013
: Expert System for Machining of Titanium Alloy
: Gold
: Dr. Sivakumar Naganathan
16-18 May 2013
: Green bricks from industrial waste
: Silver
: Assoc. Prof. Dr. Shahida Begum
16-18 May 2013
: TiO2 based varistor for low voltage
applications in integrated circuits
: Silver
149
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Dr. Ahmed Hussein Birima
16-18 May 2013
: Environmental Friendly Coagulant for the
Treatment of High Turbid Water
: Silver
Inventor
Exhibition
: Dr. Fathoni Usman
16-18 May 2013
: Value Engineering Advisory System for
Building Construction
: Silver
Inventor
: Nurul Asyikin Mohamed Radzi
16-18 May 2013
: A Simple Ethernet Passive Optical Network
Protocol Tester
: Silver
Inventor
Exhibition
Title
Award
Exhibition
Title
Award
Title
Award
Inventor
Inventor
Exhibition
Title
Award
: Hidayah Basri
16-18 May 2013
: INSPIRE - Interactive Dam Safety Decision
Support Tools
: Silver
Exhibition
Title
Award
: Assoc. Prof. Dr. Lariyah Mohd. Sidek
: INPEX 2013, Pittsburg, Pennsylvania, USA
19-21 June 2013
: ECO-ESCES (Eco-Friendly Erosion and Sediment
Control System)
: Gold
: Dr. Rohayu Che Omar, Rasyikin Roslan and
Team
19-21 June 2013
: COLUFNAS
: Gold
19-21 June 2013
: Vege-Grout2
: Gold
: Dr. Rohayu Che Omar, Intan Nor Zuliana and
Team
19-21 June 2013
: ITRF
: Gold
Inventor
Exhibition
Title
Award
: Assoc. Prof . Dr Saifuddin Hj M. Nomanbhay
16-18 Feb. 2012
: Rapid Synthesis of Carbon Nanotubes by Using
Vegetable Oil (Castor Oil) and Microwave
Irradiation
: Silver
Title
Award
Inventor
Exhibition
Title
Inventor
Exhibition
: Betty Voon Wan Niu
16-18 Feb. 2012
Award
: Learning mathematics through online
interactive graphs
: Bronze
: Dr. Woon Hai Song
17-19 May 2012
: The Production of Ferric Chloride Coagulant by
Liquid and Solid Waste
: Gold
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
150
: Alan Cheah Kah Hoe
16-18 Feb. 2012
: Using Data Mining Strategy to Analyze and
Predict Students’ Academic Performance
: Bronze
: Azizah Suliman
16-18 Feb. 2012
: Implementation of flood detection and
notification system via SMS and public network
: Bronze
: Dr. Manjit Singh Sidhu
16-18 Feb. 2012
: 2D Simulation of a Four Link Bar Mechanism
Using Matlab with Interactive Graphical User
Interface
: Bronze
: Azhana Ahmad
16-18 Feb. 2012
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: A Novel Agent-Based Approach to Conflict
Resolution of Personal and Normative Goals
Using Optimized (Sacrifice & Diligence)
Functions
: Bronze
: Assoc. Prof. Dr. Manjit Singh
17-19 May 2012
: Interactive Multimedia 3D Trouble Shooting
Guide for Mobile Phones
: Silver
: Assoc. Prof. Dr. Manjit Singh Sidhu
21-23 Feb. 2013
: 3D Engineering Visualization Application using
Visual Cues and Augmented Reality Technology
: Gold
: Norziana Jamil
21-23 Feb. 2013
: A Parental Monitoring System
: Gold
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
: Muhammad Sufyian Bin Mohd Azmi
21-23 Feb. 2013
: Predicting Breast Cancer Disease Using Data
Mining Technique
: Bronze
Title
: Surizal Bin Nazeri
16-18 May 2013
: Effective Teaching Tool for C Programming
Language
: Silver
Title
: Assoc. Prof. Dr. Sharifuddin Ahmad
16-18 May 2013
: Semantic Web-based Intelligent Robotic Vision
: Silver
Title
Award
: Assoc. Prof. Dr Manjit Singh Sidhu
16-18 May 2013
Title
Award
Inventor
Exhibition
Award
Inventor
Exhibition
Inventor
Exhibition
Award
: 3D Simulation and Analysis of a 4BL
Mechanism using Augmented Reality
: Silver
: Mazin Abed Mohammed
21-23 Feb. 2013
: An Intelligent Vehicle Route Finder and
Optimizer
: Bronze
: Sera Syarmila Sameon
21-23 Feb. 2013
: MyIslam App
: Bronze
: Tran Duc Nguyen
21-23 Feb. 2013
: A Low-cost Agent-based Loan Origination and
Automation System (Ab-LOAS)
: Bronze
College of Business Administration and Accountancy (COBA)
Inventor
Exhibition
Title
Award
: Dr. Salina Daud
17-19 May 2012
: i-SELECT
: Silver
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Marziana Tarmidi
17-19 May 2012
: Tax Compliance Towards Self Assessment
System
: Bronze
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
Inventor
Exhibition
Title
Award
: Wan Mohamad Taufik
17-19 May 2012
: Smart Governance Matrix (SGM) for Malaysian
Procurement Regime
: Bronze
: Kweh Qian Long
16-18 May 2013
: A Two-Stage Efficiency Model for National
Innovation Systems
: Bronze
: Noriza Mohd Saad
16-18 May 2013
: An Innovation of Hybric Sukuk Structure in
Global Isamic Capital market
: Bronze
Inventor
:
Exhibition :
Title
:
Award
:
Dr. Salina Daud
INPEX 2013, Pittsburg, Pennsylvania, USA
19-21 June 2013
Smart Halal Food Auditor (SHFA)
Gold
: Assoc. Prof Dr. Rusinah Siron
17-19 May 2012
: Personality Assessment for Career
Development
: Bronze
: Dr. Salina Daud
21-23 Feb. 2013
: Smart Halal Food Auditor (SHFA)
: Gold
: Wan Mohammad Taufik bin Wan Abdullah
16-18 May 2013
: P4P System for Malaysian Companies
: Silver
: Assoc. Prof. Dr. Rusinah Siron
16-18 May 2013
: Quality of Working Life Online
: Bronze
151
152
153
Researcher’s
Profile
UNITEN RESEARCH PROFILE 2013
RESEARCHER’S PROFILE 2013
Researcher’s Profile
Name
Qualifications
Area of interest
Contact
A. K. M. Parvez Iqbal, Dr.
PhD in Control and Automation Engineering, UPM, Malaysia
Automation and Robotics, Mechanical Design
+603-89217232
E-mail: Parvez@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Abd Halim Shamsuddin, Prof. Ir. Dr.
PhD in Combustion, University of Leeds, UK
Fuel and Energy, Combustion Processes and Technologies, Biomass Energy,
Thermal Treatment for Wastes, Renewable Energy
+603-89216370
E-mail: abdhalim@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Abreeza Noorlina bt Abd. Manap, Dr.
Master in Engineering Science (Structural Analysis), UNSW, Australia
Computational and Applied Mechanics, Railway Engineering
+603-89287294
E-mail: Abreeza@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Abu Bakar Musa, Assoc. Prof. Dr.
PhD in Applied Mathematics (Solid Mechanics), Loughborough, England
Viscoelastic Impact, Wave Motion
+603-89287237
E-mail: bakar@uniten.edu.my
Name
Qualifications
Area of interest
Adzly Anuar
M. Sc. in Advanced Mfg. Tech. and System Management, UMIST, England
Engineering Graphics, Manufacturing Process, Theory of Machines, Automation,
CAM, Mechanical Design
+603-89212221
E-mail: adzly@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Ahmad Qisti bin Ramli, Assoc. Prof. Dr.
PhD in Electrical Engineering
Electrical Power Engineering, High Voltage, Partial Discharge, Acoustic, Numerical
Simulation
+603-89287215
E-mail: Qisti@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Aliza Bte Abdul Latif
M. Sc. in Information Technology for E-Commerce, University of Sussex, UK
E-Commerce, E-Business, Information System Auditing
+603-89212364
E-mail: Aliza@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ammuthavali A/P Ramasamy
M. Sc. in Computer Science, USM, Malaysia
Strategic Information Systems Planning, Electrical Power Landscape (Malaysia)
+603-89212312
E-mail: Ammutha@uniten.edu.my
Name
Qualifications
PhD in Secure Access Control Architecture for Mobile Ad-Hoc Network in
Emergency Environment
Network Planning and Design, Network Security, Wireless Technology/Security,
Web Technology, CBT
+603-89212352
E-mail: Asmidar@uniten.edu.my
Area of interest
Contact
155
Name
Qualifications
Area of interest
Contact
Au Mau Teng, Assoc. Prof. Dr. Ir.
PhD, The University of Manchester, UK
Power Quality
+603-89287201
E-mail: mtau@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ayuniza bt Ahmad
M. Eng. in Communications & Computer Engineering, UKM, Malaysia
Digital Electronics, Microprocessor Systems
+603-89212278
E-mail: Ayuniza@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azhana Ahmad, Dr.
PhD in ICT, Universiti Tenaga Nasional, Malaysia
Software agent, Software Engineering
+603-89212329
E-mail: Azhana@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azizah Suliman, Dr.
PhD in Computer Science, UPM, Malaysia
Expert Systems, Neural Network, Image Processing
+603-89212390
E-mail: Azizah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azlan Bin Yusof
M. Sc. in Computer, UTM, Malaysia
Web programming, Object Oriented Application Development
+603-89212353
E-mail: AzlanY@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azrinawati Bte Mohd Remali @ Abdul Jalil
Master in Business Administration, UUM, Malaysia
Cost Accounting, Financial Accounting, Business Accounting
+609-4553129
E-mail: Azrinawati@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azrul bin Ghazali
M. Sc. in Microelectronics, UKM, Malaysia
Digital Electronics, VLSI Design, IC Fabrication, Semiconductor
+603-89212219
E-mail: Azrulg@uniten.edu.my
Name
Qualifications
Area of interest
Contact
PhD in Electrical and Electronic Engineering, University Southampton, UK
Insulation Ageing, Space Charge, Degradation Phenomena, Solar Energy
+603-89217335
E-mail: azrula@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Azwan Abd Rashid
Master in Accounting, UITM, Malaysia
Financial Accounting, Accounting Applications, Taxation, Corporate Governance,
Marketing Management
+609-4553326
E-mail: Azwan@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Badariah Solemon, Dr.
Master in Information Technology, UKM, Malaysia
Systems Analysis and Design, Computing Theory, Computer Literacy
+603-89212369
E-mail: badariah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Baharuddin Muhammad Hussin
Master in Business Administration, University of Hull, UK
Finance Statement Analysis, Security Analysis, Insurance and Risk Management
+609-4553333
E-mail: BaharM@uniten.edu.my
156
Name
Qualifications
Area of interest
Contact
Bahisham Yunus, Assoc. Prof. Dr.
PhD in Electrical Engineering, University of Manchester, Malaysia
Power System Communications, Power System/Substation Automation,
Equipment Reliability
+603-89287251 / 7250
E-mail: Bahisham@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Bakhtiar bin Alrazi, Dr.
M. Sc. in Accounting, IIUM, Malaysia
Financial Management, Financial Statement Analysis, Investment Analysis
+609-4553339
E-mail: bakhtiar@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Betty Voon Wan Niu
M. Sc. in Mathematics, UKM, Malaysia
Applied Mathematics
+603-89287217
E-mail: Betty@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Chai Mee Kin, Dr.
PhD in Analytical Chemistry, UM, Malaysia
Sample pre-treatment in GC analysis, green analytical chemistry +603-89217275
E-mail: mkchai@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Chan Yee Chuann
M. Sc. Accounting, Yuan Ze University, Taiwan
Costing, Business Accounting, Financial Accounting
+609-4553116
E-mail: YeeChuann@uniten.edu.my
Name
Qualifications
Area of interest
Chandan Kumar Chakrabarty, Prof. Dr.
PhD in RF Inductively Coupled Plasmas
Electromagnetism, Engineering Electromagnetics, RF & Microwave Engineering,
Semiconductor Devices
+603-89212340
E-mail: Chandan@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Chau Chien Fat, Dr.
PhD in Electronics and Electrical Engineering, Southampton University, UK
Microelectromechanical Systems (Microfluidic), Micro and Nanofabrication
Techniques, VLSI Design (Digital System and IC Design, Microprocessor and
Microcontroller, Low Power Design, Embedded System), Electronic Design
Automation
+603-89287297
E-mail: Cchienfat@uniten.edu.my
Name
Qualifications
Area of interest
Contact
PhD in Communication Networks Engineering, UPM, Malaysia
Telecommunications Systems
+603-89217294
E-mail: clcheah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Chen Soong Der, Dr.
PhD in Image Enhancement, UPM, Malaysia
Image/Video Enhancement, Image/Video Compression, Computer Vision
+603-89212383
E-mail: chensoong@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Chong Pui Yee
M. Sc. in Information Technology, UPM, Malaysia
Creative Thinking, Learning Styles
+603-89215016
E-mail: Pychong@uniten.edu.my
157
Name
Qualifications
Area of interest
Contact
Chong Seng Tong
M. A. in English Language Studies, UKM, Malaysia
Literary Linguistics, Cognitive Linguistics, Literature
+603-89287508
E-mail: Stchong@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ean Lee Woen
Master in Civil Engineering, UNITEN, Malaysia
Structural and Materials Engineering
+603-89217231
E-mail: LeeWoen@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Elinda Binti Esa
M. Sc. in Accounting, IIUM, Malaysia
Costing, Financial Accounting, Business Accounting, Managerial Accounting,
Financial Accounting
+609-4553328
E-mail: Elinda@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Evelyn Yeap Ewe Lin
M. Sc. in TESL, UPM, Malaysia
TESL and Communication
+603-89215036
Name
Qualifications
Area of interest
Contact
Ewe Lay Sheng, Dr.
PhD in Applied Physics (CMR), UKM, Malaysia
Magnetic Field Sensor based (CMR) Perovskite Manganites
+603-89212268
E-mail: laysheng@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Fairuz Abdullah, Dr.
M. Sc. in Communication & Network Engineering, UPM, Malaysia
Microprocessor Systems, Microprocessor Systems Lab, Optoelectronic & Fiber
Optic
+603-89212376 / +603-89213266
E-mail: Fairuz@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Farah Hani Nordin, Dr.
PhD in Engineering, UNITEN, Malaysia
Nonlinear System Identification, Neural networks, Image and Signal Processing
+603-89212244
E-mail: Farah@uniten.edu.my
Name
Qualifications
Area of interest
Faris Tarlochan, Assoc. Prof. Ir. Dr.
PhD in Mechanical Engineering, UPM, Malaysia
Impact and Crashworthiness, Mechanics of Composite - Functional Gradient and
Cellular Material, Optimization and Computational Applied Mechanics, Machine
Design, Biomechanics
+603-89282224
E-mail: rameshjit@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Name
Qualifications
Area of interest
Contact
158
E-mail: Evelyn@uniten.edu.my
Farrukh Nagi, Assoc. Prof. Dr.
PhD in Engineering, Miami, USA
Mechatronics, Mechanical Vibrations, Digital Signal Processing, Optimization,
Condition Monitoring
+603-89217202
E-mail: Farrukh@uniten.edu.my
Fathoni Usman, Dr.
PhD in Civil Engineering (Structure and Materials), UTM, Malaysia
Structure and Materials, Artificial Intelligent and Computational in Civil
Engineering, Industrial Building System, Sustainable Construction
+603-89217225
E-mail: Fathoni@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Goh Su Mei, Dr.
PhD in Applied Mathematics, UKM, Malaysia
Dynamical Systems, Chaos Theory, Numerical Computation
+603-89287287
E-mail: Sumei@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Hajar Mat Jani, Dr.
PhD in Software Engineering, UM, Malaysia
Computer Networks, Discrete Structure
+603-89212348
E-mail: hajar@uniten.edu.my
Name
Area of interest
Contact
Halil Hussain
Electric Vehicle
E-mail: halil@uniten.edu.my
Name
Qualifications
Area of interest
Halina Misran, Dr.
PhD in Bioinspired Nanoporous Materials, UNITEN, Malaysia
Nonsurfactant Synthesis of Mesoporous Materials, MOF Materials, Hybrid
Mesoporous Materials, Hydrogen Storage Materials, Adsorption of Gases, Solid
Acid Catalysts, Metamaterials
+603-89212231
E-mail: Halina@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Hanim Salleh, Assoc. Prof. Dr.
PhD in Sound and Vibration, Southampton, UK
Vibration Control, Structural dynamics, Energy harvesting, Control and
Instrumentation
+603-89287296
E-mail: HANIM@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Hasniza Binti Yahya
MIT, UKM, Malaysia
Databases, Knowledge Management
+603-89283230
E-mail: YHasniza@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Hasril Hasini, Ir.
Master in Mechanical Engineering, UNITEN, Malaysia
Combustion Modeling, Power Plant Analysis, Turbomachinary, CFD
+603-89212280
E-mail: Hasril@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Hazleen Binti Aris
M. Sc. in Software Engineering, UM, Malaysia
Automated Tools Development for Component-Oriented Software Development
(COSD), Compiler Development for COSD Specification Language, Bridging the
Gap Between the Top-Down and Bottom-Up Approach of COSD, Linking ObjectOriented Analysis and Design to the Implementation
+603-89212368
E-mail: Hazleen@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Herda Yati bt Katman
M. Eng. Sc. in Highway and Traffic Engineering, UM, Malaysia
Highway and Traffic Engineering, Pavement Materials
+603-89212252
E-mail: Herda@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Hidayah Bte Sulaiman, Dr.
PhD in Business Information Systems, RMIT University, Australia
Software Engineering, Data Warehousing, Telecommunication
+603-89212020 (Ext: 3242/7306)
E-mail: Hidayah@uniten.edu.my
159
Name
Qualifications
Area of interest
Contact
Name
Qualifications
Area of interest
Ibrahim Ahmad, Prof. Dr.
PhD in Electrical, Electronic & System Engineering, UKM, Malaysia
Microelectronic Devices & Packaging, Semiconductor Material, Failure Analysis &
Reliability
+603-89287284
E-mail: AIbrahim@uniten.edu.my
Contact
Ibrahim bin Hussein, Dato’ Prof. Ir. Dr.
PhD in Mechanical Engineering, Liverpool, UK
Energy Utilization, Alternative/Renewable Energy, Thermal Environment,
Engineering Education
+603-89287120
E-mail: Ibrahim@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Irene Ting Wei Kiong
Master in Business Administration (Finance),UUM, Malaysia
Finance
+609-4552020
E-mail: Irene@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ismail Bin Said, Assoc. Prof.
B. Sc. in Electrical and Electronics
Process Control and Industrial Automation, Electric Power Plant Operations and
Control, Study on ELF-EMF, Applications of High-Temperature Superconductivity &
Cryogenics
+603-89287350
E-mail: ismails@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Izham Zainal Abidin, Assoc. Prof. Dr.
PhD in Electrical Engineering (Power System), University of Strathclyde, UK
Power System Simulation
+603-89212262
E-mail: Izham@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Izyana Binti Ariffin
MIS (Information Systems Management), Carnegie Mellon University, USA
Statistics for Computing, Emerging Technologies
+603-89213416 E-mail: Izyana@uniten.edu.my
Name
Qualifications
Area of interest
Jagadeesh Pasupuleti, Assoc. Prof. Dr.
PhD in Power System Operation & Control
Process Control and Instrumentation, Control System, Power System, Energy
Efficiency, Alternative Energy Sources for Electricity Generation, Carbon Capture
and Storage
+603-89287277
E-mail: Jagadeesh@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Name
Qualifications
Area of interest
Contact
160
Jawaid Iqbal Inayat-Hussain
PhD in Rotor Dynamics, Kobe University, Japan
Vibration & Noise Control, Rotor Dynamics, Condition Monitoring, Nonlinear
Dynamics & Chaos
+603-89212263
E-mail: jawaid@uniten.edu.my
Johnny Koh Siaw Paw, Assoc. Prof. Dr.
PhD in Control & Automation, UPM, Malaysia
Artificial Intelligence, Machine Intelligence and Automation Technology, Laser and
Robotics
+603-89212245
E-mail: JohnnyKoh@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Kamal Nasharuddin, Prof. Ir. Dr.
PhD (Aston) Structural-Fire Engineering
Structural Steel Design, Integrated Civil Engineering Design
+603-89287600
E-mail: kamal@uniten.edu.my
Name
Qualifications
Area of interest
Kannan M. Munisamy, Dr.
PhD (CFD), UNITEN, Malaysia
Axial Fan Development, Disk Brake Heat Transfer Enhancement, Green Building
Research Specifically Air-cond and Ventilation Systems
+603-89212240
E-mail: Kannan@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Khairul Nizam Bin Mat Karim
M.A Usuluddin (Comparative Religion), UM, Malaysia
Comparative Religion, Intra-Interfaith Dialogue Studies, Islamic & Contemporary
Thought
+609-4553307
E-mail: KhairulNizam@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Khairul Salleh bin Mohamed Sahari, Assoc. Prof. Dr.
PhD in Engineering, University of Kanazawa, Japan
Robotics, Automation, Control system, Image Processing, Sensing
+603-89212297
E-mail: khairuls@uniten.edu.my
Name
Qualifications
Area of interest
Kong Sih Ying, Dr.
PhD in Structural Engineering, University of Wollongong, Malaysia
Structure and Materials, finite element analysis of structures under impact and
blast loading, vehicle crash analysis, composite structures
+603-89216474
E-mail: SihYing@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Kumaran Palanisamy, Ir.
M. Sc. in Mechanical Engineering, Purdue University, USA
Energy Modelling Policy Analysis, Renewable Energy, Biodiesel, Biomass, Biogas,
Turbomachinery, HVAC, Combustion Wave Rotor CFD Simulation, Hygrothermal
Mass Diffusion Analysis, Gas Turbines, Power Generation, Energy, Microalgae
+603-89282296
E-mail: kumaran@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Kweh Qian Long
M. Sc. in Accounting, Yuan Ze University, Taiwan
Taxation, Public Sector Accounting
+609-4553172
E-mail: Qlkweh@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Lariyah Bte. Mohd. Sidek, Assoc. Prof. Ir Dr.
PhD in Civil Engineering (Urban Drainage), Kyoto University, Japa
Green Technology, Storm Water, Urban Drainage, Hydrology
+603-89287289
E-mail: Lariyah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Lee Choon Yong, Assoc. Prof. Dr.
PhD in Civil Engineering, University of Sydney, Australia
Soil Mechanics, Foundation Engineering, Computer Analysis in Geotechnical
Engineering
+603-89287288
E-mail: Cylee@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Lee Yi Ling
B. A. in English Language, UTAR, Malaysia
Code-switching, Academic Writing, Phonetics and Phonology
+603-89215038
E-mail: yling@uniten.edu.my
161
Name
Qualifications
Area of interest
Contact
Leong Yow Peng, Dr.
PhD in Industry and Business Studies, University of Warwick, United Kingdom
Carbon Emission Reduction, Climate Change
E-mail: ypleong@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mahiah Bte. Said
CIU, Usuluddin, UM, Malaysia
Job Analysis, Task Analysis, Consumer Satisfaction
+609-4552036
E-mail: Mahiah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mahlindayu Binti Tarmidi @ Tokhid
Master in Management (IT), UPM, Malaysia
Cost Accounting, Marketing & E-Commerce, Accounting Information System
+609-4553313
E-mail: Mahlindayu@uniten.edu.my
Name
Qualifications
Contact
Mahmoud Khalid Almsafir
PhD in International Economics
+6603-89287323
E-mail: Mahmoud@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Marayati bt Marsadek
PhD in Electrical Engineering, UKM, Malaysia
Power System, FACTS (Flexible AC Transmission Systems), Reliability and Security,
Risk Based Security Assessment of Power Systems Using Statistical Computational
Intelligent Techniques
+603-89287251
E-mail: Marayati@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Marini Bte Othman, Dr.
PhD in Industrial Computing, UKM, Malaysia
IS Audit, IT Governance, Management Information Systems
+603-89212304
E-mail: Marini@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Marlinda Bt. Abdul Malek, Assoc. Prof. Dr. Ir.
PhD in Civil Engineering (Water Resources), UTM, Malaysia
Water Resources Engineering, Statistics, Artificial Intelligence, HydroAtmospheric-Regional Climate Modelling
+603-89287303 / +603-89212275
E-mail: marlinda@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mastura Johar, Dr. Hajjah
PhD in Sports Science, UPM, Malaysia
Team Dynamic, Personal Fitness and Aerobics, Motivation
+603-89287507
E-mail: mastura@uniten.edu.my
Name
Qualifications
Area of interest
Md. Ashraful Alam, Dr.
PhD in Structural Engineering, UM, Malaysia
Repair and strengthening of reinforced concrete structure, nonlinear analysis of
structure and composite materials
+603-89217292
E-mail: ashraful@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
162
Md. Mujibur Rahman, Prof. Dr.
PhD in Mechanical Engineering, UKM, Malaysia
Computational & Experimental Mechanics, Powder Metallurgy, Coupled
Deformation and Heat Transfer
+603-89287269
E-mail: majibur@uniten.edu.my
Name
Qualifications
Contact
Md. Zaini bin Jamaluddin, Assoc. Prof. Dr.
PhD in Communication and Network Engineering (Photonics and Optical
Communication)
Photonics Technologies, Optical, Network and Data Communication Security,
Development Public Key Cryptography Technology, Development Security
System, Biometrics and Biomedical Engineering
+603-89287305
E-mail: mdzaini@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Miszaina Osman, Dr.
PhD in Electrical Engineering, University of Southampton, UK
Power System, High Voltage, Earthing System
+603-89287229
E-mail: Miszaina@uniten.edu.my
Name
Qualifications
Area of interest
Mohamad Nasir Saludin, Prof. Dato’ Dr.
PhD in Human Resources, UPM, Malaysia
Performance Management, Cross Cultural Management, Multinational Corporation
Management
+609-4552020
E-mail: nasir@uniten.edu.my
Area of interest
Contact
Name
Qualifications
Area of interest
Contact
Mohamed Ansari M. Nainar, Dr.
PhD in Polymer Engineering, USM, Malaysia
Polymer Composites, Nanotechnology, Rapid Prototyping and Tooling, CNC
Machining, CAD/CAM
+603-89212213
E-mail: Ansari@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mohammed Azlan Bin Mohamed Iqbal, Dr.
PhD in Computer Science (Artificial Intelligence), UM, Malaysia
Strong AI, Cybernetics, Computer Programming
+603-89212334
E-mail: Azlan@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mohd Azree Bin Idris, Assoc. Prof. Dr.
PhD, Imperial College London, UK
Computer Aided Engineering, Numerical Analysis, Heat Transfer, Renewable
Energy
+603-89217223
E-mail: azree@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Master of Accounting, UiTM, Malaysia
Customers’ Preference, Financial Accounting
+6017-9396422
E-mail: MRizuan@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mohd Sharifuddin Ahmad, Assoc. Prof. Dr.
PhD in Artificial Intelligence, Imperial College of Science, Technology and
Medicine, UK
Knowledge Management, Software Agent
+603-89217307
E-mail: sharif@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mohd Zainal Munshid Bin Harun, Dr.
DBA (Admin), UUM, Malaysia
Organisational Behaviour, Strategic Management
+609-4553309
E-mail: Zainal@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Mohd Zaliman M. Yusof
PhD, UKM, Malaysia
Programming, Software Project Management
+603-89212317
E-mail: Zaliman@uniten.edu.my
163
Name
Qualifications
Area of interest
Contact
Mohd Zamri Yusoff, Prof. Dr.
PhD in Mechanical Engineering, Birmingham, UK
Computational Fluid Dynamics, Thermodynamics, Heat Transfer, Engineering
Graphics & Computer Aided Engineering
+60389287255
E-mail: zamri@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Muhamad Bin Mansor, Dr.
Master of Electrical Engineering in Power Engineering, UNITEN, Malaysia
Partial Discharge Pattern Classification of XLPE Cable using Statistical Technique
+60389287263
E-mail: Muhamadm@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Muhammad Fairuz bin Abdul Jalal
M. Sc. in Mechatronics, University of Applied Sciences Ravensburg-Weingarten,
Germany
Design, Robotics, Control System, Mathematical Modeling and Simulation
+603-89217282
E-mail: mfairuz@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Muhammad Sufyian Bin Mohd Azmi
M. Sc. In Software Engineering, UPM, Malaysia
Aritifcial Intelligence, Database System
+60389212388
E-mail: Sufyian@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nadia Tan Mei Lin
PhD in Electrical and Electronic Engineering, Tokyo Institute of Technology, Japan
Power Conversion Systems, Bidirectional Isolated DC-DC Converters
+603-89217256
E-mail: nadia@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nagaletchumi Balasubramaniam
M. Sc. in Computer Systems Engineering, UPM, Malaysia
Mobile Communication
+603-89213260
E-mail: nagaletchumi@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nasri A. Hamid, Assoc. Prof. Dr.
PhD in Physics, UKM, Malaysia
Applied Superconductivity
+603-8987252
Name
Qualifications
Area of interest
Nazaruddin A. Rahman
PhD in Electrical Engineering, UM, Malaysia
High Voltage, ELF-Electromagnetics, Lightning, Magnetic Materials, Electrical
Machines
+603-89282253
E-mail: Nazaruddin@uniten.edu.my
Contact
Name
Qualifications
Area of interest
E-mail: Nasri@uniten.edu.my
Contact
Ng Yu Jin
M. Ed. In TESL, UPM, Malaysia
Education Technology, Teaching and Learning, Materials and Adaptation, Corpus
Analysis, Anxiety and Learning (White Space Analysis)
+603-89215023
E-mail: yujin@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nik Fanidautty Nik Ab Majid
MA in Economic, UKM, Malaysia
Microeconomics, Macroeconomics, Quantitative Analysis
+6012-2861937
E-mail: Fanidautty@uniten.edu.my
164
Name
Qualifications
Area of interest
Contact
Nor’ashikin Bte Ali
M. Sc. in IT in Business, University of Lincolnshire-Humberside, UK
Knowledge Management, Databases, Information Systems
+603-89213340
E-mail: Shikin@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norashidah Md Din, Assoc. Prof. Ir. Dr.
PhD in Electrical Engineering, UTM, Malaysia
Communication Network, Internet Quality of Service
+603-89287293
E-mail: norashidah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Noor Miza bt Muhamad Razali, Dr.
PhD in Electrical Engineering, UNITEN, Malaysia
Power System Planning & Scheduling Optimisation, Power System Stability &
Operational Risk Analysis
+603-89212226
E-mail: noormiza@uniten.edu.my
Name
Qualifications
Contact
Noor Raida bt. Abd. Rahman
M. Sc. in Accounting, UIAM, Malaysia
+609-4553341
E-mail: norraida@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Noor Shamsiah Othman, Dr.
PhD in Electrical and Electronic Engineering, University Southampton, UK
Mobile Communication, including Wireless Multimedia Communications
+603-89287214
E-mail: shamsiah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nor Edi Azhar Bte. Mohamad
Risk Management, Financial Management, Corporate Finance
+6012-9215181
E-mail: NorEdi@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nor Hamisham Bte. Harun
MA in Economics, UKM, Malaysia
Microeconomics, Macroeconomics, Quantitative Analysis
E-mail: Hamisham@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nor Razuana Bte. Amran
M. Sc. in Finance, UUM, Malaysia
Quantitative Analysis, Financial Management
+609-4553363
E-mail: Norrazuana@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norazizah Mohd Aripin, Dr.
PhD in Electronics and Electrical Engineering, University of Southampton, UK
Wireless communications, Radio resource management for 3G-WCDMA system,
Digital & Microprocessor system
+603-89287214
E-mail: norazizahm@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norhayati Mat Husin, Dr.
M. Sc. International Accounting & Consultancy, Reading University, UK
Accounting, Finance, Consultancy
+609-4553329
E-mail: hayati@uniten.edu.my
Name
Contact
Norhazwani Abd Malek
+603-89216355
E-mail: norhazwani@uniten.edu.my
165
Name
Qualifications
Area of interest
Contact
Normy Norfiza Binti Abdul Razak, Dr.
PhD in Bioengineering, University of Canterbury, UK
Modelling of Temperature Distribution in 2D and 3D Using TLM Methods
+60389216228
E-mail: normy@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norfhadzilahwati Binti Rahim
M. Sc. in Finance, UUM, Malaysia
Quantitative Analysis, Financial Statement Analysis and Investment
+6013-9836322
E-mail: Norfhadzilah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Noriza Mohd Saad
Financial Management, Financial analysis, Corporate Finance
+609-4553336
E-mail: Noriza@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norkhazimah Bte. Ahmad
Master in Accounting, UiTM, Malaysia
Financial Accounting, Taxation, Costing
+609-4553345
E-mail: Norkhazimah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norsalwati Bte. Othman
Energy economics, Financial market, Public Finance
+609-4553399
E-mail: Norsalwati@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Norziana Jamil, Dr.
PhD in Security in Computing, UPM, Malaysia
Cryptography, Cryptanalysis, Quantum Crypto, Biometrics, Internet Security,
Security Protocols, Security in Wireless Network, Image Processing and all sorts of
mathematical security proof
+603-89212374
E-mail: Norziana@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nur Irmawati Bt Om
M. Sc. in Mechanical Engineering, UNITEN, Malaysia
Heat Transfer Modelling, Nanofluid
+603-8921295
E-mail: Irmawati@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nur Mazlini binti Razali
Renewable Energy, Computational Fluid Dynamics, Modeling & Design,
Combustion
+60389216369
E-mail: mazlini@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nur Shakirah Binti Md Salleh
Master of Information Technology, UNITEN, Malaysia
System Administration, Computer Organization, Discrete Structures
+603-89203319
E-mail: Shakirah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Nurul Wahilah Bte. Hj. Abdul Latif
MA in Economics, UKM, Malaysia
Managerial Economics, Quantitative Analysis, Microeconomics, Macroeconomics
+603-89203317
E-mail: NurulWahilah@uniten.edu.my
166
Name
Contact
Nurulbahiah Bte Awang
+603-89201349
Name
Qualifications
Area of interest
Contact
Ong Hang See, Assoc. Prof. Dr.
PhD in Biomedical Engineering and Medical Physics, University of Minnesota, USA
Green ICT; Smart Grid; TCP/IP Technologies; Grid and Cluster Computing;
Biomedical Informatics and Visualization; Biomedical Instrumentation
+603-89212339
E-mail: Ong@uniten.edu.my
Name
Qualifications
Area of interest
Contact
M. Sc. in Mechanical Engineering, UNITEN, Malaysia
Heat Transfer, Liquid Flow
+603-89212230
E-mail: prem@uniten.edu.my
Name
Qualifications
Raja Feninferina Binti Raja Azman, Y.M.
M. Tech. in Computer Science Engineering, International Institute of Information
Technology Hyderabad, India
Web Programming, Principles of C Programming, Software Quality
+603-89212355
E-mail: Ferina@uniten.edu.my
Area of interest
Contact
Name
Qualifications
Area of interest
Contact
Name
Qualifications
Area of interest
E-mail: Nurulbahiah@uniten.edu.my
Rajeswari A/P Devadass
Master in Business Administration, UIAM, Malaysia
Psychology, Principle Of Management, Cross Cultural Management, Academy
Study Skills
+609-4553125
Rajeswari@uniten.edu.my
Contact
Razali Bin Jidin, Assoc. Prof Dr.
PhD in Electrical Engineering, University of Kansas, Kansas, USA
Electrical Circuit, Microprocessors, Industrial Automation, Electrical Measurement
Lab, Microprocessor Lab, Advanced Microprocessors, Embedded System
+603-89287208
E-mail: razali@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ridha Bin Omar
Master in IT (Computer Science), UKM, Malaysia
Computer Aided Learning, Human Machine Interaction, Virtual Reality
+603-89212326
E-mail: Ridha@uniten.edu.my
Name
Qualifications
Area of interest
Rohayu Che Omar, Dr.
PhD in Environmental and Development, UKM, Malaysia
Geo-environment, Slope Monitoring and Assessment, Geoscience in Urban
Planning, Problematic Rock and Soil
+603-89212288
E-mail: rohayu@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Roslan bin Ismail, Assoc. Prof. Dr.
PhD in Information Security, Queensland University of Technology, Australia
Applied Cryptography, Mobile Security, Information Security, Computer Forensic,
Software Testing and Software Security
+60389212338
E-mail: roslan@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Rusinah Siron, Assoc. Prof.
PhD in Education Administration, UPM, Malaysia
Business Ethics, Personality Assessment
+603-89287327
E-mail: rusinah@uniten.edu.my
167
Name
Qualifications
Area of interest
Contact
Saifuddin M. Nomanbay, Assoc. Prof. Dr.
PhD in Cloning and Enzymatic studies of Transferase in Latex
Biomass and biodiesel
+603-89287285
E-mail: Saifuddin@uniten.edu.my
Name
Qualifications
Area of interest
Contact
PhD in Business Management, UNITEN, Malaysia
Smart Halal Food Auditing
+609-4552038
E-mail: Salina@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Salman Yusof, Dr.
PhD in Engineering
Distributed Systems, Networking, Image Processing, Education, Robotics
+603-89212365
E-mail: Salman@uniten.edu.my
Name
Qualifications
Contact
Shafazawana Bte Mohamed Tharikh
BBA in Human Resource Management, UNITEN, Malaysia
E-mail: Shafa@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Shahida Begum, Dr.
PhD in Advanced Ceramics (Electro Ceramic), Dublin City University, Ireland
Spray Drying, Advanced Ceramics, Ceramic Catalytic Converter, Waste Water
Management In Process Industry, Ceramic Magnetic Materials, Ceramic Heat
Exchanger, Ceramic Sensor
+603-89212274
E-mail: Shahida@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Shahrul Nizam Salahudin, Dr.
PhD in Management, UTM, Malaysia
Total Quality Management (TQM), Human Resources Management
+609-4552054
E-mail: ShahrulN@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Sharifah Azma Syed Mustaffa
M. Eng. Electrical-Power, UTM, Malaysia
Power System and Control
E-mail: SharifahAzma@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Sharifah Azwa Bte Shaaya
M. Sc. in Electrical, Telecommunications Engineering
Communication, Digital Electronics, Microprocessor Systems
+603-89217249
E-mail: Shazwa@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Sharifah Buniamin
Master of Accounting, UKM, Malaysia
Environmental Reporting, Corporate Governance, Earnings Management,
Accounting Education
+609-4552113
E-mail: sharifah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Shuhairy Bin Norhisham
Master in Highway and Transportation Engineering, UPM, Malaysia
Highway Design, Traffic Engineering, Drafting Technology
+603-89216223
E-mail: Shuhairy@uniten.edu.my
168
Name
Qualifications
Area of interest
Contact
Name
Qualifications
Area of interest
PhD in Materials Science (Physics), UKM, Malaysia
Materials Science - Synthesis (microemulsion, chemical co-deposition,
electrochemistry), fabrication (semiconductors), characterization (HPDSC, LPM,
SAXS, UV-Vis-NIR, FTIR, XRD, SEM with EDXA, TEM, XPS), and applications of
nanoparticles in the lubricants (4-ball tribo system and pin on disc tribotester)
+603-89287260
E-mail: Siti@uniten.edu.my
Contact
Siti Salbiah Mohamed Shariff, Assoc. Prof. Dr.
PhD in Computer and Information Sciences, University of Strathclyde, Scotland
Information Strategy, Strategic Information Systems Planning, Information Audit,
and e-Business
+603-89212300
E-mail: sitisalbiah@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Siti Zubaidah bt Othman
Ceramics, Advanced Materials
+603-89216245
E-mail: zubaidah@uniten.edu.my
Name
Qualifications
Area of interest
Sivakumar Naganathan, Dr.
PhD in Concrete Technology, UM, Malaysia
Concrete Technology, Self-Compacting Concrete, Building Materials Using Wastes,
Cement Replacement Materials, Light Gauge and Cold Formed Steel Structures,
Repair And Retrofitting of Structures
+603-89212257
E-mail: SivaN@uniten.edu.my
Contact
Name
Qualifications
Area of interest
Contact
Suhaimi Ab. Rahman
M. Sc. in Computer Science, UKM, Malaysia
Software Engineering, Artificial Intelligence, Natural Language Processing and
Knowledge Engineering, Real Time Systems, Human Computer Interaction (HCI),
Safety and Security Applications
+603-89212331
E-mail: smie@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Suzaida Bte. Bakar
M. Sc. in Management, UUM, Malaysia
Corporate Finance, Financial Statement Analysis
+609-4553357
E-mail: Suzaida@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Suzy Aziziyana Bte. Saili
M. H. Sc. in History and Civilization, IIUM, Malaysia
Human Resource, Management
+609-4553139
E-mail: suzy@uniten.edu.my
Name
Qualifications
Contact
Syed Khaleel Ahmed
M. Sc. in Electronics and Communications Engineering, University of
Massachusetts at Amherst, USA
Signals and Systems, Digital Signal Processing, Control Systems, Computer
Controlled Systems
+603-89212276
E-mail: syedkhaleel@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Syed Zainal Abidin bin Syed Kamarul Bahrin
Master in Electrical Engineering, UNITEN, Malaysia
Electrical Machines and Devices Design, Opera 2D, Robotics
+60389286277
E-mail: SZainal@uniten.edu.my
Area of interest
169
Name
Qualifications
Area of interest
Contact
T. M. Indra Mahlia, Prof. Dr.
PhD in Mechanical Engineering, UM, Malaysia
Energy and Environment, Energy Conversion, Energy Efficiency, Energy Policy
+60389287221
E-mail: indra@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Tan Ee Sann
Master in Mechanical Engineering
Renewable Energy, Biodiesel, Combustion, Liquid Fuel Atomization, Power
Generation
+603-89216479
E-mail: eesann@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Tan Kwe Lu
MA in Economics, Windsor, Canada
Green Entrepreneurship
+609-4553042
E-mail: tan@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Theresa Yeo Wee Sing, Dr.
PhD in Nanocomposite, UM, Malaysia
Composite Materials, Superalloy, X-ray Diffraction Analysis
+603-89287278
E-mail: weesing@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Tiong Sieh Kiong, Assoc. Prof. Dr. Ir.
PhD in Electrical, Electronic & System Engineering, UKM, Malaysia
Advance Microprocessor System, Microprocessor System, Courses Taught Artificial
Intelligence, Industrial Automation
+603-89212282
E-mail: siehkiong@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Tuan Ab Rashid Tuan Abdullah, Ir. Dr.
M. Sc. in Electrical Power Engineering with Business, University of Strathclyde, UK
Electrical Machines and Devices
+603-89212267
E-mail: TRashid@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Ungku Anisa Ungku Amirulddin Al Amin, Dr.
PhD in Electrical and Electronic Engineering, University of Nottingham, UK
Analysis and Simulations of Electrical Machines and Drives
+60 3-89212227
E-mail: Anisa@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Wan Mohamad Taufik Bin Wan Abdullah
Master in Accountancy, Accounting (Corporate Governance), UiTM, Malaysia
Auditing, Governance, Business Accounting, Financial Accounting
+609-4553351
E-mail: WMTaufik@uniten.edu.my
Name
Qualifications
Area of interest
Contact
M. Eng. in Civil Eng. Geotechnics, UTM, Malaysia
Peat stabilization, Slope stability, Environmental geotechnics, Biodiesel Process
Simulation and Chemical separation Techniques
+603-89217250
E-mail: Wongls@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Woon Hai Song, Dr.
PhD in Material Science, Permanent Magnet, UPM, Malaysia
Material Science, Permanent Magnetism, Iron Oxide Pigment
+603-89217320
E-mail: hwoon@uniten.edu.my
170
Name
Qualifications
Area of interest
Contact
Yap Boon Kar, Dr.
PhD in Experimental Solid State Physics, Imperial College London, UK
Organic Semiconductor Devices - Polymeric Light-Emitting Diodes (PLEDs),
Organic Transistors, Organic Lasing Media
Inorganic Semiconductor Devices - Advanced copper wire bonding on ultra-low k
wafer, Polymer core ball bond, Silver plated copper filler, Flux cleaning process
+603-89282229
E-mail: kbyap@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Yee Chiew Ling @ Vivian
MA English Language (Applied Linguistics in ELS), UKM, Malaysia
TESL, Communication, Linguistics
+603-89217573
E-mail: Vivian@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Yip Chan Heng
Energy from Waste, Landfill Gas, Biogas
+603-89212251
E-mail: Chyip@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Yunus Bin Yusoff
MA in Computer Application (Computer Security), Pacific Lutheran University, USA
Disaster Recovery, Information Security, WebTechnology, Information
Management, Management of IT Resources
+603-89212393
E-mail: Yunusy@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Zaihisma Binti Che Cob
MM in IT, UPM, Malaysia
Human Computer Interaction, Web Programming
+603-89213456
E-mail: Zaihisma@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Zainuddin Bin Hassan, Assoc. Prof. Dr.
PhD in IT in Construction & Propery, University of Salford, UK
IT Management, Knowledge Management, Project Management
+603-89212321
E-mail: Zainuddin@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Zalina Hashim
Master, Birmingham University, UK
Green Environment, Management Accounting
+603-89217319
E-mail: zalina@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Zolman bin Hari, Dr.
PhD in Material Sciences, UPM, Malaysia
Material Science (Soft Ferrite) +603-89217242
E-mail: Zolman@uniten.edu.my
Name
Qualifications
Area of interest
Contact
Zulkifli Bin Zainal Abidin
M. Sc. in Management Accounting & Planning, UUM, Malaysia
Cost Accounting, Managerial Accounting, Financial Accounting
+609-4552039
E-mail: ZZulkifli@uniten.edu.my
171

Research Directory College of Engineering

Transcription

Similar documents

Hurricane Katrina Surge Inudation and Advisory Base Flood