docvente aux enchères publiques
download 
Report Transcription
vente aux enchères publiques
VENTE AUX ENCHÈRES PUBLIQUES Auctionsale after bankruptcy in France Maître Frédéric BROSSAT - Commissaire Priseur Judiciaire 435 Boulevard Louis Neltner, 42000 SAINT-ETIENNE Tél. : 04 77 21 75 38 - Fax : 04 77 21 65 12 - Email : brossatcpj@wanadoo.fr FABRICATION DE PANNEAUX SOLAIRES ASSEMBLAGE DE COMPOSANTS ELECTRONIQUES 443 Rue René Cassin ZI Molina la Chazotte 42350 La Talaudière Catalogue complet disponible sur notre site internet Detailed catalogue on our website www.interencheres.com www.lutece-industrie.com MANUFACTURING OF SOLAR PANELS ELECTRONICS SURFACE MOUNT ASSEMBLY VENTE EN SIMULTANÉ SUR WWW.INTERENCHERES-LIVE.COM LIVE BIDDING ON THE INTERNET Mardi 15 Décembre 2015 Tuesday, December 15th 2015 à 14h00 at 14.00 p.m HOTEL DES VENTES 435 Boulevard Louis Neltner 42000 SAINT-ETIENNE AUCTION ROOM 435 Boulevard Louis Neltner 42000 SAINT-ETIENNE Pour tout renseignement / For all request : +33 (0)6 78 49 00 74 Anglais et Espagnol / English and Spanish : +33 (0)7 81 58 50 40 Assisté par : LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles 60, rue de Castagnary - 75015 PARIS Tél. : +33 (0)1 39 56 07 63 Mobile : +33 (0)6 82 82 32 08 Fax. : +33 (0)9 70 60 56 68 info@lutece-industrie.com NOTICE FOR BUYERS The public auction sale is ruled by the General conditions of sale which are at the end of the catalogue, and, besides, by the following ones. VIEWING Monday, December 14th 2015 from 9.00 am to 12.00a.m and from 14.00 to 18.00 Tuesday, December 15th 2015 from 8.00 am to 12.00 am ELIFRANCE 443 Rue René Cassin – ZI Molina la Chazotte 42350 La Talaudière AUCTION SALE The auction sale will be held Tuesday, December 15th 2015 at 14h00 Auction Room 435 Boulevard Louis Neltner 42000 SAINT-ETIENNE By the Ministry of Maître Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire 435 Boulevard Louis Neltner 42000 SAINT-ETIENNE Buyers are required to fill in the buyer’s card available in the auction room and at the viewing, by writing their complete references, and, auction being cash, to give a signed check at the order of Frédéric BROSSAT and a bank guarantee (model hereafter) if the check is not certified. For the buyers subjugated and identified in an EU state member, write their VAT ID. n° and produce the id. n° given by the administration of their own country. Auctions are made net of tax. The purchaser will pay, in addition to price of adjudication a buyer’s premium of 14,4 % with VAT as well as the VAT of 20 % on the total price. CLEARANCE OF LOTS Referring article 4 of the general conditions of sale, no clearance will be able without complete and certified payment. Clearance on working days by appointment with Maître Frédéric BROSSAT From Tuesday, December 16th 2015 Small lots must be removed no later than December 18th 2015 at 17h30 Late removal January 25th 2015 at 18h00 PAYMENT / BANK DETAILS CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30 IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP The translation of the French catalogue is intended only for purpose of understanding: the genuine text in French language is the only one available for legal matter. The conditions of sale in French are detailed in the French catalogue. 1 GUARANTEE OF PAYMENT / BANKBÜRGSHAFT We, the undersigned Bank / Wir, die unterzeichnete Bank Address / Adresse Phone: Fax: Guarantee the amount of Euros / Garantieren bis zum Betrag von Euros Being the amount of the bid / die Kaufgeschäfte By Mister or Miss Company / Firma Head Office Commercial Registration n° Holder at this bank of account n° / Inhaber des bei uns geführten Kontos During the auction sale / bei der Versteigerung ELIFRANCE For payment, Mister/Miss from the company ….....................................................................…………… will establish a check that we guarantee with the above mentioned limits or the payment, with his first written demand on the same conditions, could be done to the account of the auction’s office / Zum Zweck der Zahlung wird unser Kunde entweder einen Scheck ausstellen, den wir bis zur Höhe des oben genannten Betrages garantieren, oder wir werden eine Überweisung auf das Konto des Amtsträgers vornehmen, sabald dieser uns die Rechnung vorlegt. Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire 435 Boulevard Louis Neltner 42000 SAINT-ETIENNE Tel : +33(0)4 77 21 75 38 Fax : +33(0)4 77 21 65 12 brossatcpj@wanadoo.fr Paiement CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30 IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP Done in / Ausgestellt in ................................................, on / am ...................................………………. Signature / Unterschrift Commercial stamp / Stempel 2 BUYING ORDER AUCTION SALE : ELIFRANCE, December 15th 2015 at 14h00 NAME : ……………………………………………… FUNCTION .................................................................. COMPANY :………………………………………………………………………………………………………………….... ADDRESS : …………………………………………………………………………………………………………………... ZIP CODE/ TOWN: …………………………………………………………………………………………………………………… PHONE NUMBER: ………………………………………………. FAX: …………………………………………………………… BANK : .................................................................................ACCOUNT NUMBER .................................... VAT NUMBER : ................................................................................. ...................................................................... Requests Me Frédéric BROSSAT to buy the lots mentioned below for us for the price with VAT (20%) and without fees (14,4 % TTC) maximum written during the auction sale : ELIFRANCE, December 15th 2015 at 14h00 Undersigned is conversant with the conditions of auction contract. Please find herewith the GUARANTEE OF PAYMENT. Lot Number DATE : Lot description AMOUNT in Euros excl. BUYER’S PREMIUM ADJUGED PRICE in Euros SIGNATURE : 3 Batch no Est. 1 200 2 3 4 5 6 7 8 9 10 Description 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA Set of 2 cabinets, 8 units, roll-up 100 doors NILFISK Vacuum Cleaner, GD 30 1000 Series 80 Facom tool trolley 80 MAPE Grinder SYDERIC Pillar Drill, SNC23, n°6663, year 1984 SIMCO ionizers (2 pieces) 50 AEROSTATPC SAM Torque key (2 pieces), 0.6EL 100 and 0-3 300 12 50 13 50 Thermal heaters (3 pieces) 16 Hilti fastening apparatus, model DX450 Chauvin Arnoux megohmeter, 200 C.A6545 Chauvin Arnoux megohmeter, 200 C.A6545 130 100 AZ Heat Cutter, GG2 18 200 Chauvin Arnoux megohmeter, C.A6543 SEFELEC Dielectric Strength 150 Tester, PR5M, No. 305 20 100 EUROSTAT Ohmmeter, TOM600 21 250 22 200 2 anti-static testers 23 24 25 Year STRAPEX Strapping Machine, ALLPACK, No. 99051221 STRAPEX Electric Strapping 250 Machine, No. 50184878, year 2005 Strapping Machine, manual, no 100 manuf. no model, with dispenser ORGAPACK Electric Strapping 150 Machine, OR-T250 with dispenser and 2 strapping coils 26 180 Set of 6 ramps SIMCO ionization 27 200 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA Location Testing zone Testing zone NILFISK Maintenance FACOM Maintenance Maintenance MAPE Maintenance Maintenance SYDERIC SNC23 SIMCO AEROSTATPC 6663 1984 Maintenance Maintenance SAM Maintenance SUPER50 Maintenance Cordless drills (1 DEXTER and BOSCH) 17 19 Serial no 100 Shears, blade: 200mm 80 SUPER50 Precision Saw 15 Type 100 Work bench, 4 drawers, with vices 11 14 Brand Maintenance Maintenance HILTI DX450 Maintenance C.A6545 Maintenance C.A6545 Maintenance AZ GG2 Maintenance CHAUVIN ARNOUX C.A6543 Maintenance SEFELEC PR5M EUROSTAT TOM600 STRAPEX ALLPACK CHAUVIN ARNOUX CHAUVIN ARNOUX 305 Maintenance Maintenance 9905122 1 Maintenance Workshop entrance 5018487 8 STRAPEX 2005 Stock Stock ORGAPACK SIMCO OR-T250 Stock Testing zone Testing zone 28 50 4 tool trolleys Testing zone 29 600 6 workstations Testing zone 4 30 600 6 workstations Testing zone 31 500 5 trolleys 2 trays Testing zone 32 400 4 trolleys 2 trays Testing zone 33 400 4 work tables Testing zone 34 400 4 work tables Testing zone 35 600 6 workstations and 1 tall cabinet Testing zone 37 200 38 41 42 2 workstations and 5 tables (various) TESTUT scales, range [1 kg to 30 150 kg] Stepladders: 1 with 7 steps, 1 with 50 8 steps MIL'S Vacuum pumps, B 300, No. 300 A595, power 5.5 Kw 43 350 Set of 10 socket boxes 44 300 45 400 46 1 500 47 100 48 100 50 250 000 51 10 000 52 2 500 53 2 000 54 120 000 Set of 10 (approx) rolls of 10 baskets (SOMETO Technifil) Room contents, including 7 cabinets and their contents Contents of floors 1 and 2 of the maintenance workshop PRECISA scales, XB 4200C-GB, max. 4200 Kg, mini. 0.5 g PRECISA scales, 1000C-3000D, max. 3000 Kg, mini. 5 g Lots 50 to 63 can be grouped AUTOMATED PRODUCTION LINE CRYSTALLINE PHOTOVOLTAIC MODULES Production capacity of 20 MW 4 modules every 7 minutes Panels with 60 and 72 cells Outputs ranging from 219 to 288 WC Laying machine Stringer TEAM TECHNIK model Stringer TT1200, No. A00100561, 2011 ABB Robot 6 axes IRB6640 M 2004, No. 66-68839, year 2010 with MARCI lift table , cap 1000kg, enclosure and loading/unloading conveyor Visual control station with supply conveyor, and with entrance and exit elevator Panel turning module with input conveyor BURKLE laminator, Easy Lam, ELAPV HV1-2135-A, No. 0125420110, 2010 with 2 BUSCH vacuum pumps, Cobra NC 400B, and 2 SINGLE heaters, STO 180/1-60-0- D4 / BU, 60 Kw power 2010 Testing zone Maintenance Stock Testing zone Workshop Testing zone Maintenance Maintenance Maintenance Maintenance TEAM TECHNIK ABB A001005 61 2011 Photovoltaic line IRB6640M2004 66-68839 2010 Photovoltaic line STRINGER TT1200 Photovoltaic line Photovoltaic line BURKLE E-LAPVHV12135-A 1254201 10 2010 Photovoltaic line 5 55 56 Set of 3 belt conveyors with panels turner BERGER Imagesetter, PSS8, No. 60 000 1257 power 000W Photovoltaic line Photovoltaic line Photovoltaic line Photovoltaic line 15 000 57 6 000 58 2 000 60 20 000 61 600 62 300 63 15 000 65 1 200 66 3 500 67 2 000 68 20 000 69 200 80 5 000 81 500 82 3 000 83 5 000 85 8 400 Dark IV Module Tester BUS RIBBON Cutting Station, KOMAX, ADS115 TRIULZI washing machine, SX1610.6.3.4 No. DODC40088, 2010 with IDROTECHNICA osmosis unit, IDRO RO 500, No. 11884/10 flow 500 L / h HYMO Lift Table, cap 3000kg, width. 1.20m, 2m long MARCO Lift table, capacity 1000kg, width 800mm, 1200mm long PASQUATO SNC knife cutting machine, TTP EVA, No. 629, year 2010, width 2m Test pillar with LLOYD INSTRUMENTS extensometer, LF PLUS, No. 01 / LFLS / ILXA / EU, year 2006 with AXIOHM mini printer (A711) Automatic control by DELTEC VISION image analysis, DV.TEC.3000 AA No. 10093 with associated IT VISION ENGEENERING Microscope (VS8) PASAN Cell tester, CTS LAB 606 with PELLETIER work table, flash counter, PASAN BV67-5 module, two BV 67-14 modules, one BV 67-25 module, one BV 67 module, one BV 67-29 module, one HP CPU, 2 LCD ACER screens (17 inches) CETIM, year 1991, 100 X 100cm steel foot Approx. 12 boxes of 500 SOLLAND cells, S 20 156PS20010CO 14 reels of string (2.40 x 0.15mm), 5 reels of string 1.70 x 0.15mm Batch of 6 pallets, aluminum profile, 1000 pieces, length 1655 mm; 5 pallets, aluminum profile, 1000 pieces; 15 cartons of FILM BACK MLP μ 185, height 1020 mm; 60 cartons with junction boxes, approx 40 cartons of TESA, double-sided, width 19mm Batch of 18 pallets of glass (DUCATT - ref. COLD2), thickness 3.2 mm, length 1647 mm, width 991 mm, polishing C 1.5 Batch of solar panels, maximum power 250 Wp, open circuit voltage 37.78 V; Short Circuit current 8.80 A BERGER BUS RIBBON KOMAX ADS115 TRIULZI SX1610.6.3.4 DODC40 088 2010 Photovoltaic line Photovoltaic line HYMO Photovoltaic line PASQUATO SNC TTP EVA 629 2010 Photovoltaic line LLYOD INTRUMEN TS LF PLUS 01/LFLS/ ILXA/EU 2006 Photovoltaic line DELTEC VISION DV.TEC.3000 AA 10093 VISION ENGEENER ING VS8 Parts storeroom PASAN CTS LAB 606 Parts storeroom Parts storeroom Parts storeroom Stock Stock Stock Stock Photovoltaic line 6 CMS Line No. 1 - Lots 100 to 106 can be grouped 100 ASYS Loader, model AES 03D, 500 No. 502, 2000 ASYS AES 03D 101 300 ASYS copper destacker - model LSB 03, No. 228 ASYS LSB 03 COOKSON SPEEDLINE VPM ULTRAPRINT 3000 102 103 104 105 106 COOKSON Silkscreen Unit, model 3 000 UP3000 / A, No. U0899, MYDATA SPEEDLINE UltraPrint VPM 3000 MYDATA Component Assembly Unit, model MY19L1, No. 19119, 19 slots, year 2000 with two 10 000 MYDATA motorized conveyors and stacker and MYDATA stacker, TEX, automatic DYAMANT Inspection Center, model VI 3000, No. 8108, 2000 3 000 with conveyor and computer station HELLER reflow oven EXI 1912, No. 0406F2-A7B3-81025-03, year 5 000 2006, capacity 500 x 130 + IBM Screen 500 ASYS Output Stacker, model AMS 030, No. 503, 2000 MYDATA 2000 228 MY19L1 2000 DYAMANT VI 3000 2000 HELLER 1912 EXI 2006 ASYS AMS 030 503 2000 Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone CMS Line No. 2 - Lots 110 to 115 can be grouped 110 111 112 113 500 DYAMANT INDUSTRY Destacker Silkscreen Center SPEEDLINE 3 000 MPM UltraPrint 3000 model UP3000 / A, No. U0901 MYDATA mounting unit of components, such MY9, No. 5081, 4 000 2000, 9 slots with 2 conveyors and stacker 1 MYDATA Component Assembly Unit, model MY12, No. 13101, 6 000 year 2000, 12 slots with 2 conveyors and 1 stacker 114 5 000 115 500 HELLER reflow oven 1809 EXL, No. 0405F2-A783-8329-03, 2005 ASYS output module model AMS04 DYAMANT INDUSTRIE SPEEDLINE MPM UP3000/A U0901 MYDATA MY9 5081 2000 MYDATA MY12 13101 2000 HELLER 1809EXL 0405F2A7838329-03 2005 ASYS AMS04 Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone CMS Line No. 4 - Lots 120 to 122 can be grouped 120 Screen printing center SPEEDLINE 3 000 SPEEDLINE MPM UltraPrint 3000, MPM No. U0900 ULTRAPRINT 3000 U0900 Container, materials handling and storage zone 7 121 Screen printing center 3 000 SPEEDLINE MPM model AP / B, No. 10090 123 MYDATA Component Placement Machine, model MY15, No. 15101, 6 000 year 2001, 15 slots with 2 motorized conveyors MYDATA MY15 124 3 000 DYAMANT VI 3000 optical inspection center DYAMANT VI 3000 125 MYDATA Component Placement Machine, model MY15, No. 15093, 6 000 year 2000, with 2 motorized conveyors MYDATA MY15 126 3 000 BTU Reflow Oven, model Paragon 150 BTU PARAGON 150 127 500 Output Module Stacker ASYS AMS 03D, No. 019796, year 2005 ASYS AMS03D 128 10 000 Inspection Center CYBEROPTIC model SE 300 3D detection CYBEROPT IC SE300 SPEEDLINE MPM AP/B 10090 15101 2000 15093 2000 19796 2005 Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone CMS Line No. 3 - Lots 130 to 134 can be grouped 130 FUJI Destocker, model MNCE 500 4050B, No. FNE0008, year 1997 131 Screen printing center 3 000 SPEEDLINE MPM UltraPrint 3000 model UP3000 / A, No. U0926 FUJI MNCE FNE0008 1997 2000 Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone 132 MYDATA MY19 Component 10 000 Placement Machine, No. 19115, year 2000, 19 slots with stacker MYDATA MY19 19115 133 BTU Reflow Tunnel, model 3 000 Paragon 150, No. SCF-37 with conveyor BTU PARAGON 150 SCF-37 134 5 000 MYDATA TP18 assembly unit, year 1992 MYDATA TP18 135 2 000 Lot of 10 Agilis feeders, model LM8 136 Lot of 10 Agilis feeders, model 2 000 LM8 Container, materials handling and storage zone 137 Lot of 5 Agilis feeders, model 1 000 LM116 Container, materials handling and storage zone 1992 8 138 2 000 Set of feeder supports 139 4 000 Set of 73 media feeders Container, materials handling and storage zone Container, materials handling and storage zone End-of-Line Inspection Center No. 8135, year 2000 with input and output conveyor and inspection bench VI TECHNOLOGY optical inspection unit, model VI 3000, No. VI 04030188, 2004 with input and TECHNOLO output motorized conveyor and GY output table X-ray control unit, PHEONIX X PHEONIX X RAY model INSPECTOR PCBA RAY 130, No. IN501C8000-52103, 2003 TAKAYA mobile sensor test unit, model ITOCHU APT9400CE No. TAKAYA VOF08031, 2000 TAKAYA mobile sensor test unit, TOCHU APT9401CE, n° TAKAYA V2F22080, year 2002 with printer STAR DP8340 Solder Machine ERSA, model SELECTIVE WAVE, model VERSAFLOW 50/60, No. ERSA 04J0160-S005B, year 2004, with extraction and filtering unit (PUREX) Solder Machine SOLTEC WAVE, model 6622CC, No. 0005611801, SOLTEC year 2000, with input conveyor 140 3 000 141 3 000 142 10 000 143 25 000 144 25 000 145 20 000 146 10 000 147 Solder machine (VITRONICS SOLTEC), model 6622CC, No. 10 000 0112676701, year 2001 with filtering extractor (PUREX), year 2007, input conveyor 148 Varnishing line with: - Motorized input module - Robot (ASYMTEK), model C740 - Conveyor with inspection cage (UV) - Conveyor oven (THERMATECH) 10 000 length 2,5m - Exit belt with ventilated inspection cage (UV) - Product cabinet (4 doors) - 2 ovens - 2 extractors 149 500 Stencil cleaner (MBTECH), model N29SA2 150 Soldering machine (ZEVAC), 200 model MINI WAVE, model SSM 9 with digital display, foot control and table VITRONICS SOLTEC 8135 2000 Soldering zone VI 3000 4030188 2004 Soldering zone PCBA INSPECTOR 130 IN501C8 00052103 2003 Soldering zone ITOCHU APT9400CE VOF080 31 2000 Soldering zone ITOCHU APT9401CE V2F2208 0 2002 Soldering zone VERSAFLOW 50/60 S005B04J0160 6622C 5611801 2000 Soldering zone 6622C 1126760 1 2001 Soldering zone Soldering zone Soldering zone Technical room ZEVAC MINI VAGUES SSM9 Soldering zone 9 151 250 155 300 156 700 157 350 158 200 159 400 160 1 500 161 162 163 164 165 Unit has: - Duburring and Tinning with two containers (WAVE SERVICES), model PAD500 ROHS, year 2007 - Solder machine (ZEVAC), model MINI WAVE, model SSM4 with steel bench and extraction hood Component sealer (DIMA), model Handytaper Mini CNC milling center Colinbus model LAB FLEX-30 / HF, 2008. Table 70 x 50cm approx. 278x / 360 Y / Z 70mm 60 000 rpm. Plexiglas cage aluminum chassis, rolling metal tube structure. Finishing station with: - Modular stereomicroscope (LEICA MZ6), fixed foot, Zoom FINETECH RV1+WATEC 202D IRIS focus+ camera WATEC 23152, heater, 2 heat modules FINETECH RB11 1600W - Module FINETECH solver removal - Module FINETECH reflow removal - Module FINETECH placer control - Module FINETECH hot air bottom heating - Small scanner of thermal profile (ECD MOLE) - ELECO air flow rate controller Configuration: rotary table (XY), color camera, opticals (right and oblique), HP Vectra central unit, standard screen CTX 19-inch and selection of accessories (soldering irons, foot pedal) Configuration: - 2 shears (LOUPO) 2mm et 3mm - 5 heat scissors (CAB), Hektor 2 (3 pieces) and Hektor 3 (1 piece) - STRECKFUSS lead shear (model 057) - With table and accessories Connector placement machine (AMP), model ACTION-PIN, n° 677-427-1, pneumatic, year 1996, mobile fame table with bench, steel foot, composite top ZEVAC VAGUES SERVICES DIMA HANDYTAPER COLINBUS LABO FLEX30/HF PAD500 ROHS 2007 Soldering zone 2008 Soldering zone Soldering zone ERSA Soldering zone ERSASCOPE Soldering zone AMP ACTION -PIN Soldering zone 677-4271 Soldering zone 400 Board testing Interface (NMTC) Forming and Cutting bench 200 (OLAMEF), model MOT/98/A, n°121955 Performing machine 200 (STRECKFUB), model C066/M, n°85.12 238 Cutting bench (EBSO), model 200 EBSOMAT 40-2 Cutting bench (BURST & ZICK), 200 model C042, n°00.12.804E, year 2000 Soldering zone OLAMEF MOT/98/A 121955 Soldering zone STRECKFU B C066/M 85.12 238 Soldering zone EBSO EBSOMAT 402 BURST & ZICK C042 Soldering zone 00.12.80 4E 2000 Soldering zone 10 166 167 168 169 170 171 172 173 174 175 176 177 Manual shaping and cutting bench OLAMEF 100 (OLAMEF), model TP6/1, n° 182010, year 2007 Manual shaping and Cutting bench OLAMEF 100 (OLAMEF), model TP6/1, n° 191010, year 2008 Cutting bench (CUTBEND), model CUTBEND 100 VB 2 Die-Cutting machines (EMG EMG 300 PRESSES) with jig and table PRESSES Batch of 6 Die-Cutting machine COMATEL 400 (COMATEL) with table 2 PCB separators (MAESTRO), MAESTRO 300 model 2M with table and riveter Dispensing robot (I&J FISNAR), I&J FISNAR 4 000 model I&J7400C-R, n°234.005, year 2007 ABA Counter CMS-4 ABA ELECTRON 150 ELECTRONQUE IQUE ABA Counter CMS-4 ABA ELECTRON 150 ELECTRONQUE IQUE ABA Counter CMS-4 ABA ELECTRON 150 ELECTRONQUE IQUE ABA Counter CMS-4 ABA ELECTRON 150 ELECTRONQUE IQUE Horizontal counter (OLAMEF), OLAMEF 150 model 8301101, n°111902, year 2000 TP6/1 182010 2007 Soldering zone TP6/1 191010 2008 Soldering zone Soldering zone Soldering zone Soldering zone Soldering zone VB 2M I&J7400C-R 234.005 2007 Soldering zone Testing zone Testing zone Testing zone Testing zone 8301101 111902 2000 Testing zone 178 100 2 Counters (OLAMEF) Testing zone 179 100 2 Counters (OLAMEF) Testing zone 180 8 000 181 4 000 182 3 000 183 1 500 184 10 000 185 400 186 300 187 3 000 188 1 200 Tester AGILENT, model 3070 AGILENT series 3 Tester HP, model HP 3070, series HP 3 Tester GENRAD, N°22871-339, GENRAD year 2008 Tester GENRAD, N°22871-339, GENRAD year 2004 Tester TERADYNE, model SPECTRUM 8800 series, n°8855- TERADYNE 058 Vacuum pump (MIL'S), model MIL'S ROTOMIL'S with vertical tank Inspection Center (CYBEROPTIC), CYBEROPT model LSM2 IC 30 GENRAD boards (approx.) and miscellaneous parts 12 boards (approx.) for test bench (HP3070) 3070 Série 3 Testing zone 3070 Série 3 Testing zone 22871339 22871339 SPECTRUM 8800 Séries 8855-058 2008 Testing zone 2004 Testing zone Testing zone ROTOMIL'S Testing zone LSM2 Testing zone Testing zone Testing zone 189 300 6 Test Heads (GENRAD) Testing zone 190 250 5 Test Heads (HP3070) Testing zone 191 Set of spares for ICT Test Head: 150 hands, sleeves - All sizes, forms and strengths Testing zone 11 192 300 195 4 000 196 4 000 197 3 000 198 800 199 500 200 600 201 200 202 200 203 200 204 200 205 500 206 500 207 200 208 300 209 210 Set of sensors (JTAG) Temento, Microchip, Altera Climate chamber (CLIMATS), model EX7728-HE, No. 7236, year 2006 - width. 850mm, height 900mm, depth 900mm Climate chamber (CLIMATS), model EX7728-HE, No. 7136, year 2006 - width 850mm, height 900mm, depth 900mm Climate chamber (CLIMATS), model 760M30/3 - width. 850mm, height 850mm, depth 900mm Climate chamber (SHEL LAB), model 1465-2CE, No. C800501 width. 450mm, height 450mm, depth 550mm Steaming CLIMATS model XU686, No. 7503, 2007. Max 200 ° C, power 6 2kW - width 660mm, height 1400mm, depth 700mm Oven Memmert, model ILE800 No. G800.0074, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm Dry cabinet (DR.STORAGE), model X2E-240, No. AA08112223. Width 550mm, height 530mm high, depth 520mm Dry cabinet (DR.STORAGE), model X2E-240, No. AA07102297. Width 500mm, height 500mm, depth 400mm Dry cabinet DR.STORAGE, X2E240 model No. BA07122269. Width 500mm, height 500mm, depth 400mm Dry cabinet DR.STORAGE, X2E240 model No. BA07122268. Width 500mm, height 500mm, depth 400mm Oven (MEMMERT), model ILE800 No. G800.0073, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm Oven CLIMATS, Width. 670mm, height 1400mm, depth 700mm Oven, no manuf., no model. Width 700mm, height 1200mm, depth 400mm Oven (CLIMATS). Width 700mm, height 1440mm, depth 600mm Testing zone oven room oven room oven room oven room oven room ILE800 G800.00 74 DR.STORA GE X2E-240 AA08112 223 DR.STORA GE X2E-240 AA07102 297 DR.STORA GE X2E-240 BA07122 269 DR.STORA GE X2E-240 BA07122 268 MEMMERT ILE800 G800.00 73 MEMMERT Testing zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Container, materials handling and storage zone Testing zone CLIMATS Testing zone Testing zone CLIMATS Testing zone Oven (HERAEUS 200 INSTRUMENTS), model T6030, No. 51000023, max temperature 250°C. Width 350mm, height 200mm, depth 350 mm HERAEUS INSTRUME NTS T6030 5100002 3 1 500 Oven (MPC), model SE79, No. 26001, year 1996. Width 780mm, height 1400mm, depth 600mm MPC SE79 26001 Testing zone 1996 Testing zone 12 211 212 213 Oven (MEMMERT), model ULP500 No. 9597.0164, max 300 temperature 300 ° C, power 2000W width. 550mm, height 470mm high, depth 360mm MEMMERT ULP500 9597.016 4 Testing zone Dry cabinet (DR.STORAGE), 300 model X2E-315, No. BA07102212. Width. 850mm, height 800mm, depth 380mm DR.STORA GE X2E-600 BA07102 212 Testing zone Dry cabinet (DR.STORAGE), 3 500 levels, model X2E-600, No. CA08052265. Width 550mm, height 450mm, depth 500 mm DR.STORA GE X2E-600 CA08052 265 Container, materials handling and storage zone DR.STORA GE X2E-600 CA08052 266 Container, materials handling and storage zone FRANCO PACK AUDIONVAC VM 201 FRANCO PACK VM201G 2010040 267 BOSS NT1/46N 51147 214 Dry Cabinet (DR.STORAGE), 500 model X2E-600, No. CA08052266. Width 550mm, height 450mm, depth 500 mm 215 Vacuum bagging FRANCO PACK 800 model AUDIONVAC VM 201, 1999 50x50cm size 216 217 218 219 225 1 200 Bagger FRANCO PACK model VM201G, No. 2010040267, 2000 Bagger (BOSS), model NT1 / 46N, 300 No. 051147 Dry cabinet (SUPER DRY). Width. 200 800mm, height 800mm, depth 650mm 600 Dry cabinet Washer MBTECH card model 3 500 NC25 SUPER DRY 1999 2000 Container, materials handling and storage zone Container, materials handling and storage zone Kardex zone Kardex zone Testing zone Testing zone 2 000 Washer KERRY cards, model SC 1000, No. 60151-2-16-301 Washing machine LANCER model 1 000 1300 PCB with demineralization station LANCER Testing zone 228 1 200 Machine to dry LANCER model 13 PCB Lab SEC Testing zone 229 1 500 AQUEOUS machine, SMT model 1000-1D, No. 7538, 2006 Testing zone 235 400 Precision diamond saw LDWS ESCIL model W 6234 Testing zone 236 300 Testing zone 237 Bay with oscilloscope, model 475, 300 voltmeter HP, model 3456A, and various 226 227 Workstation ZEVAC model DRS24 Testing zone Testing zone 238 100 Tektronix Oscilloscope model TDS784C Testing zone 239 400 Electron microscope cross table with VISION Testing zone 13 240 241 242 Electron microscope MICROELECTRONICS model MX 5030RZ; Lens Hirox AD-5030RLMS Mount; Light source Hirox KH 1000 HI SCOPE cross table with MICROELE CTRONIQU 600 microscope stand; Hirox MX 2525C with wheel; CPU DELL E OPTIPLEX GX1, IYAMA monitor; LS902UT vision Masters 1451 19 inches, Monitor JVC TM-90 PSN 45W UNION electronic microscope with 500 color camera CP410 PANASONIC WV 75 ohms with 4.7kW microscope stand KINETIC SYSTEM vibrating table, 300 model VIBRAPLANE MX 5030RZ Testing zone UNION Testing zone KINETIC SYSTEM VIBRAPLANE Testing zone 3478A Testing zone 243 200 3 Multimeters HP, model 3478A HP 244 LCR Meter HP, 20MHz-1mhz guy 300 with HP 16034E test fixture Module HP Testing zone 245 150 3 HP Multimeters HP Testing zone HP Testing zone 246 1 500 HP spectrometer, model 3588A 247 100 Tektronix Oscilloscope model 11801C TEKTRONI X Testing zone 248 100 HP frequency meter, model 5316B HP Testing zone 249 250 251 Microscope RANK XEROX, 1 500 PANASONIC No. M264220 with camera CCD FICOSA Tester model 400 X400SVWX350X202 RANK XEROX FICOSA M264220 X400SVWX350 X202 2 000 Wiring Tester model Synor 4200 Testing zone Testing zone Testing zone 252 100 2 MOLE Cases for temperature measurement and profile MOLE 253 200 SIMCO electrostatic funnel model EA2 SIMCO EA2 Testing zone 254 200 DOGA cutting measurer model 2641C DOGA 2641C Testing zone 255 200 Set of 4 stabilized power supplies 256 257 Laser power SPECTRON LASER 500 SYSTEM Compatible shutter CW60 3 SIMCO electrostatic controllers, 300 ELCOWA and ION SYSTEMS Testing zone Testing zone SPECTRON LASER SYSTEM CW60 Testing zone Testing zone 258 3 000 Contaminomètre METRONELEC model CT1000 Testing zone 259 NATIONAL INSTRUMENTS test bench, model NI PXI-1042 with 2 000 NIPXI-2503 card and various accessories Testing zone 14 Batch with: - 2 sliding calipers, digital (STAINLESS), 0 to 500mm - sliding caliper, digital (0 to 300mm) - sliding caliper (0 to 650mm) - sliding caliper (0 to 300mm) - Height gauge (TUTOYO) from 0 to 300mm Batch with: - 3 comparators (75 to 100mm; 25 to 50mm; 0 to 25) - 3 gauges - 2 comparators (miscellaneous) Batch of 3 gauge boxes (JMC) and 1 box of precision wedges Batch of 3 binoculars OPTIKA, model SZ6745 Batch of 3 binoculars OPTIKA, model SZ6745 260 150 261 150 262 150 270 300 271 300 272 300 Batch of 3 binoculars LEICA 273 300 Batch of 3 binoculars 274 300 275 300 276 300 277 400 280 150 281 150 282 100 283 100 284 100 285 100 286 500 287 500 288 289 290 291 Batch of 3 binoculars ZEISS, model STEMI 2000 Batch of 3 binoculars LEICA, model MS5 Batch of 3 binoculars LEICA, model MS5 Batch of 4 binoculars ZEISS, model STEMI 2000 Rework System (ERSA), model IR500A Rework System (ERSA), model IR500A Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces) Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces) Digital Preheating Plates (PDR), model IRP500 (2 pièces) Digital Preheating Plates (METCAL & PACE) (2 pieces) Soldering Station (METCAL), model PW1 SP 20 with table (5 pieces) Soldering Station (METCAL), model STSS PS2V 02 with table (5 pieces) Soldering Stations (METCAL), 500 model STSS PS2V 02 with table (5 pieces) Soldering Stations (METCAL), 500 model MX 500P 21 with table (5 pieces) Soldering Stations (METCAL), 200 model MXPS5200 with table (2 pieces) Soldering Station (WELLER), 400 model WMD-3 with table (4 pieces) Testing zone Testing zone Testing zone OPTIKA Testing zone OPTIKA Testing zone LEICA Testing zone Testing zone ZEISS Testing zone LEICA Testing zone LEICA Testing zone ZEISS Testing zone ERSA Testing zone ERSA Testing zone WELLER Testing zone WELLER Testing zone PDR Testing zone Testing zone METCAL Testing zone METCAL Testing zone METCAL Testing zone METCAL Testing zone METCAL Testing zone WELLER Testing zone 15 292 293 Soldering Stations (OKI), model PS900, 90W (3 pieces) Soldering Station (WELLER), 200 model WHA-2000 820W 300 294 300 2 Soldering Stations (WELLER), model MT1500, 130W with plate 295 200 2 Soldering Stations (JBC), model Advanced JT7000, 900W Soldering station (OKI), model 150 Smartheat MFR PS2K 75W No. 006605 3 Soldering Stations (WELLER), 300 PACE Thermal strippers (TMC), PB150M 250 No. 20M0984, 2006 with JBC station 296 297 298 299 300 301 500 5 Dosing Modules (EFD) Dosing module (LOCTITE), model 250 97006 Ultrasonic Scalpel NSK, model 80, 250 No. 017768 OKI Testing zone WELLER Testing zone WELLER Testing zone JBC Testing zone OKI Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone 302 300 Ultrasonic Scalpel TMC model 203 304 100 305 500 306 500 307 500 308 400 309 300 310 250 311 100 312 100 313 100 314 100 315 100 316 100 317 100 318 100 2 screwdrivers ELIZA model ELI15 5 precision screwdrivers DELVO DELV73 5 precision screwdrivers DELVO DELV73 5 precision screwdrivers DELVO DELV73 4 precision screwdrivers DELVO DELV73 About 20 drives without screwdrivers Dolly with PACE module, model ST450 with Fume Extraction System (PACE), model ARLM EVAC 250 Fume Extraction System (BOFA), model SYSTEM400 Fume Extraction System (BOFA), model SYSTEM401 Fume Extraction System (BOFA), model SYSTEM402 Fume Extraction System (BOFA), model SYSTEM403 Fume Extraction System (BOFA), model SYSTEM404 Fume Extraction System (BOFA), model SYSTEM405 Fume Extraction System (BOFA), model SYSTEM406 Fume Extraction System (BOFA), model SYSTEM407 319 100 Fume Extraction System (PACE) Testing zone 320 100 Fume Extraction System (PACE) Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone 16 321 100 Fume Extraction System (PACE) Testing zone 322 100 Fume Extraction System (PACE) Testing zone 323 100 Fume Extraction System (PACE) Testing zone 324 100 Fume Extraction System (PACE) Testing zone 325 100 Fume Extraction System (PACE) Testing zone 326 100 Fume Extraction System (PACE) Testing zone 327 100 Fume Extraction System (PACE) Testing zone 328 100 Fume Extraction System (PACE) Testing zone 340 300 341 342 2 Printers BRADY labels 600XPLUS-E model 2 Printers BRADY labels 600X300 PLUS-E model 2 Printers BRADY labels 600X300 PLUS-E model 343 500 4 Printer ZEBRA labels, such Z4M 344 450 345 300 346 300 400 2 000 401 3 000 402 1 000 403 4 000 404 4 000 405 3 000 3 Label Printers: ZEBRA Z4000; ZEBRA z6000; PUBADRESSE 2 label printers (ZEBRA), model 110XiIII + 2 Label Printers: BRADY BPPR600 + A4 + / 300 Vertical storage carousel (KARDEX), model INDUSTIEVER 105, No. IND 105 2510 6. Max. total load 2 tons. Load per tray 300 K, Width 250cm Vertical storage carousel (ELECTROCLASS), model G60 16P / 17 "50 / H4540, 2001, No. 01M1624 series, Max load per tray. 250Kg, width approx 300cm with set of component trays Vertical storage carousel (HANEL), model ROTOMAT 970, No. 61872 / 2-2, year 1993. Width 300cm approx. Max load per tray: 191Kg, Total load (max) 475Kgs Vertical storage carousel (ELECTROLUX), model IPN 4000, No. 1270, year 1994. Width 250cm approx. Robot useful load: 3150Kg, payload per slot: 150Kg Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 149/31600. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx. Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 123/26138. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx. Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone Testing zone KARDEX INDUSTIEVER 105 IND 105 2510 6 ELECTROC LASS G60 16P/17" 50/H4540 01M1624 2001 Kardex zone HANEL ROTOMAT 970 61872/22 1993 Kardex zone ELECTROL UX IPN 4000 1270 1994 Kardex zone BELLHEIME R IND 251 1610,5-2 149/3160 0 Kardex zone BELLHEIME R IND 251 1610,5-2 123/2613 8 Kardex zone Kardex zone 17 406 407 408 409 410 411 415 416 417 418 419 420 421 422 423 424 Vertical storage carousel (BELLHEIMER), model IND 2713.5 to 12 251, No. 128/27 402. BELLHEIME 5 000 Average load per tray: 239Kg. R Total max load 6453KG. Width 250cm approx. Vertical storage carousel (BELLHEIMER), model SIS 181 2113.75 46, No. 90 097348/001. BELLHEIME 3 000 Load capacity per tray: 130/162 Kg R max Total load 2794KG. Width 250cm approx. IND 251 2713,5-12 128/27 402 Kardex zone SIS 181 2113.75 46 90 097348/0 01 Kardex zone 3 000 Vertical storage carousel Vertical storage carousel 2 000 (BELLHEIMER), model I 1052510-5-ND No. 021/23808 Vertical storage carousel 2 000 (BELLHEIMER), model I 1052510-5-ND No. 021/23687 1 vertical storage carousel, 4 levels, width 3600 mm, depth 1900 mm, height 2200 mm. And 3 300 dynamic storage carousels, with 2 levels and 4 shelves, width 1200 mm, depth 1200 mm, height 1900 mm Mast boom (HAULOTTE), model 7 000 STAR 10, No. ME108193, 2010. Max load 200Kg, lift height 8m Electric Forklift (CLARK), front loading, model EM20, year 1994. 3 200 Cap 2 tons, lifting height 3300mm, 3-stage mast, four full wheels, 3714Kms Electric Forklift (CATERPILLAR), side loading, model FB20KT, cap. 3 800 2 tons, lifting height 3300mm, 3stage mast and translator, three full wheels, year 2005 Electric Forklift (CATERPILLAR), side loading, 2-stage mast, 1623 4 000 hours, model RB20K No. R20K10058, cap. 2 tons, lift height 5400mm Electric pallet stacker (CROWN), 500 WF 3000 series, duplex mast, cap. 1 Tonne Pallet movers (Bishamon), model 300 ESL V40CE Pallet movers (Bishamon), model 300 ESL V40CE Pallet movers (Bishamon), model 300 ESL V40CE Pallet movers (Bishamon), model 300 ESL V40CE Pallet lifter (GS), cap. 1T, lift height 250 50cm, No. 760027 Kardex zone Kardex zone Kardex zone Kardex zone HAULOTTE STAR10 CLARK EM20 ME1081 93 2010 Stock 1994 Stock CATERPILL AR Stock CATERPILL AR Stock WF Stock BISHAMON ESL V40CE Stock BISHAMON ESL V40CE Stock BISHAMON ESL V40CE Stock BISHAMON ESL V40CE Stock GS 760027 Stock 425 250 Pallet truck scales, cap 2T Stock 426 100 Pallet truck, fork length 1.5 m Stock 427 100 Pallet truck, fork length 800mm, cap. 2.5T Stock 18 Pallet truck, fork length 800mm, cap. 2T Stock 428 100 429 100 Pallet truck, cap. 2T Stock 430 100 Pallet truck, cap. 2T Stock 431 100 Pallet truck, cap. 2.2T Stock 435 120 436 437 440 446 449 450 451 452 453 455 456 470 471 472 Manual Stackers (HYMO), model SC2-12, cap. 200Kg Manual Stackers (HYMO), model 120 SC2-12, cap. 200Kg Workshop hoist (SHOP CRANE), 250 model SC500A, year 2008, 500Kg Batch of +/- 60 tool carts 300 (CREFORM), and accessories 500 Lot of +/- 30 carts (CADDIE ROLL) 35 meters of shelving, light loads, 2 000 5 levels, width 1 m, height 2 m, and 2 high metal cabinets Shelving for heavy loads, 3 levels, 3 500 2X36m length, frame width 1.20m, frame height 4.50m, beam 3.60 m Shelving heavy load 3 levels 3 500 2X36m length, frame width 1.20m, frame height 4.50 m, beam 3.60 m Shelves for light loads, 2 levels with wood duckboards, frame 3 500 width 1,04 m, frame height 4.50 meters, beam 2.90 m. Approx 70 m Chemicals storage cabinet, airconditioned, holding tanks, width 1 500 2900 mm, depth 2000 mm, height 2300 mm 350 cartons (approx.), dimensions 2 000 1680x1100x1010 mm and 4800 mm carton 1000x1600 1 500 400 pallets (approx.) 6 desks (metal and melamine) + separations + cells, metal cabinets (2 roll-up doors), 7 typist chairs, 4 220 low cabinets (metal), 1 metal filing cabinet with 4 levels, 1 table, 1 metal coat stand, 1 artificial plant 1 conference table (8 modules), 16 cantilever chairs (blue), 3 cabinets 200 (metal, roll-up doors), 1 MAGIMIX NESPRESSO coffee machine, 1 black melamine unit Executive's office furniture: 1 desk (walnut and melamine), 1 conference table (walnut top), 6 office chairs (5 castors black 350 leather, wooden armrests), 1 executive chair (high back, 5 castors, black leather), 1 storage unit, 1 coat stand, 1 felt-top table with aluminum frame HYMO SC-12 Stock HYMO SC-12 Stock Stock Stock Soldering zone Kardex zone Stock Stock Stock Outside Stock Outside Office rooms Office rooms Office rooms 19 473 1 round table (melamine), 2 deks + separation, 1 low cabinet (metal + 40 roll-up door), 1 felt-top table with aluminum frame, one coat stand Office rooms 474 Executive's office furniture: 3 tables made of a solar panel with 200 tube feet, 10 cantilever chairs with gray fabric, 1 high chair, 1 felt-top table Office rooms 475 400 1 designer cabinet (6 glass doors) Office rooms 476 120 477 60 478 479 480 481 482 483 6 GATEWAY LCD flat screens, HD 2250, 22 inches Office rooms 4 GATEWAY LCD flat screen, 19 inches Office rooms 4 parlor chairs, red fabric, 1 low 60 table, 1 display cabinet, 3 artificial plants 1 desks + cell + 1 coat stand 15 (integrated to desk), 1 desk + metal unit + chair (in a desk) 10 Desk + chair + Metal furniture 1 paper shredder (IDEAL), 4000 wide model 3 metal cabinets, roll-up doors + 1 60 console (in a hallway) 100 7 tables (metal, melamine top), 13 chairs (PVC, gray fabric), 5 cantilever chairs (blue fabric), 10 folding chairs (PVC, black), 5 250 stacking chair (wood and metal), 2 round tables with central foot, 1 low unit (melamine), 1 small cabinet (melamine), 1 display cabinet (melamine base), 2 tables 484 80 1 projection screen (roll up) 485 50 4 desks + separations, 6 chairs, 1 low unit (metal) and cell Office rooms Office rooms Office rooms Office rooms Office rooms Office rooms Office rooms Office rooms 486 10 desks with partitions and cells, 9 typist chairs, 1 metal cabinet with 150 roll-up doors, 2 low metal cabinets, 2 coat stands Office rooms 487 Infirmary: 1 treatment table (meal and leatherette), 1 folding 80 stretcher, 1 metal desk (old), 2 chairs Office rooms 488 700 2 UPS (LIEBERT) GXT 10 KVA UPS STATION TZ 30 Office rooms 20 489 490 491 Batch of electronic equipment: 3 parallel ports JP LINK TL PS110P, 1 PCD adapter LINK 10/100 MBPS, 1 USB adapter D LINK 2.4 ghz, 1 mini print server NETGEAR PS101 print server, 1 PC card NETGEAR 54 Mbps Wireless WG 150 511, 1 IDE controller card BEST PCI-X SATA II, 1 digital camera SONY DCR SX30E, 2 switches NETGEAR 16-port, 2 switches NETGEAR 16 ports, 1 USB 2.0 NETGEAR adapter, 1 switch 8 port D LINK DGS 1008D, GEM 1 switch 4 ports Three sound stations POLYCOM / 40 POLYSPAN Lot 20 computers (CPU, screen, 700 keyboards, mouse) Office rooms Office rooms Office rooms GENERAL CONDITIONS OF SALE SALES PROCEDURE Article 1 The sale is public and shall be carried out by auction. Sale of each lot should be made to the highest bidder against payment in full. In the case of a double bid, the lot shall be put back in the sale and the public invited to bid again. Article 2 The auction shall take place in the order indicated in the catalogue. The auctioneer judicial reserves the right to deviate from the order of the catalogue, combine or divide lots, or withdraw lots put up for sale where they have not attained a suitable price, even when bids are higher than the opening. Article 3 The lots are sold in the state that they are in at the time of sale, without any guarantee or right of appeal. The buyer is deemed competent and aware of the lot status. Any photos or advertising material are not contractual. The dimensions, quantities and qualities appearing in the catalogue are for information only, and are not guaranteed. PAYMENT OF THE PRICE, FEES AND TAXES 21 Article 4 Sale price is net of tax. The buyer shall pay, in addition to the sale price, buyer’s fees of 14,4 % with VAT. To be effective, the payment, shall be made either: - in cash following the current regulations, maxi 1 000 €, - by certified check or by check accompanied imperatively by a banker’s guarantee (see model attached), - by bank transfer (method of payment required for buyers outside France) The buyers outside France must pay the amount of the French VAT (20%) as deposit. This amount will be refunded on receipt of the transport document for the buyers from EU, and on receipt of the export document for the buyers outside EU. All bank fees are at the buyer’s charge. TRANSFER OF OWNERSHIP AND GUARANTEES Article 5 Buyers are responsible for lots from the time they have been sold, but the transfer of ownership shall not be made until payment has been collected. As from the date of the sale, the seller shall not be held responsible for the partial or total disappearance of the lot sold or any damages which it may incur. REMOVAL OF AUCTIONED LOTS Article 6 Removal shall be made by the buyer within the period stated in the catalogue and/or at the time the lot was put up for sale. In the case where the buyer does not remove the lots within the time limit, the seller reserves the right to have them removed and stored at the expense of the buyer, without his engaging in any responsibility whatsoever as to the state or preservation of the lots in question. Article 7 Unless otherwise stated, gas, water, steam or electricity pipes, or any other connections to the purchased lot shall be disconnected at the site of the initial join, switch, tap or reference points marked by the seller on the pipes. RESTRICTIONS CONCERNING THE SALE OF CERTAIN EQUIPMENTS Article 8 Equipment are generally sold in conformity with technical specifications and according to French legal safety standards. This conformity is attested either by a seal of conformity (put into service after 01/15/81) or a CE seal (put into service after 01/15/93) and the certificate of compliance. Article 9 If a lot does not conform to technical specifications or to French legal safety standards, this is stated in the catalogue description or during the auction. Article 10 Non compliant equipment are sold unsuitable for use in production. They will be sold as is: 1. to a person or entity intending to use the equipment outside the EC.. 2. to a person or entity having the capacity of retailer, rebuilder or collector, committing to compliance, under its responsibility, before transfer to an operator. 3. to a professional whose business recycling components. 22 Article 11 The provisions of articles 8 to 10 are not applicable in the case of judicial sale performed after ruling ordering the liquidation of the seller. Article 12 The measures contained in articles 8 to 11 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. OTHER CLAUSES Article 13 These conditions are deemed to be known and accepted without reservation by the buyer. Only the general conditions of sale written in the French language govern the sale; all translations are only indicative. * * * 23 FURNITURE AND MISC. MOBILIER ET DIVERS LOTS N° 476-477-491 Mobiler divers Furniture LOT N° 488 Nombreux PC Many PC Onduleurs Inverters Ce dépliant photos ne présente qu’un échantillon des matériels proposés à la vente. This photo flyer only contains a survey of the objects to be auctioned. POUR PLUS DE DÉTAILS, VEUILLEZ TÉLÉCHARGER LE CATALOGUE SUR NOTRE SITE FOR MORE DETAILED INFORMATION, PLEASE DOWNLOAD THE CATALOGUE ON OUR WEBSITE www.lutece-industrie.com www.lutece-industrie.com VISITES BELGIUM ELIFRANCE ELIFRANCE LUX. 443 Rue René Cassin ZI Molina la Chazotte 42350 La Talaudière FRANCE Lundi 14 Décembre 2015 de 9h00 à 12h00 et de 14h00 à 18h00 Mardi 15 Décembre 2015 de 8h00 à 12h00 VIEWING GERM 443 Rue René Cassin ZI Molina la Chazotte 42350 La Talaudière SWITZERLAND Monday, December 14th 2015 LA TALAUDIÈRE from 9.00 a.m to 12.00 a.m and from 14.00 to 18.00 ANDORRA CONDITIONS DE VENTE : Les conditions générales de vente sont précisées au catalogue, notamment en ce qui concerne les restrictions sur la vente des matériels non conformes aux dispositions techniques ainsi qu’aux normes de sécurité légales ou règlementaires françaises. Les lots concernés sont repérés par un astérisque dans le catalogue de vente. Le paiement des lots s’effectue au comptant majoré du montant des frais 14,4% TTC. LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles 60, rue de Castagnary 75015 PARIS IT Tuesday, December 15th 2015 from 8.00 a.m to 12.00 a.m Paiement/ Bank details CIC - ST ETIENNE HÔTEL DE VILLE Code Banque 10096 IBAN BIC Code guichet N° de compte 18017 00043527302 FR7610096180170004352730230 CMCIFRPP Clé RIB 30 Tél. : +33 (0)1 39 56 07 63 Fax. : +33 (0)9 70 60 56 68 English and Spanish : +33 (0)7 81 58 50 40 info@lutece-industrie.com Lutèce Industrie R.C.S. Paris B 530 114 412 LOTS N° 470 À 489 CARTE D’ENREGISTREMENT REGISTRATION CARD Pour vous enregistrer, merci de nous remettre ce formulaire lors des visites ou avant la vente, avec votre carte de visite si possible. To be registered, please give us back this document during the visit or before the auction, with your business card if possible. SOCIÉTÉ / COMPANY : ADRESSE / ADRESS : ……………………………………………………………………………………………………………………………… ………………………………………………………………………………………………………………………………………………………………………………………………………………………………… …………………………………………………………………………………………………………………………………………………………………………………………………………………………………… CODE POSTAL / ZIP CODE : TÉLÉPHONE / PHONE : TÉLÉCOPIE / FAX : N° ACHETEUR / BUYER … ……………………………………………………… ……………………………………………………………………… ………………………………………………………………………………… VILLE / TOWN : … …………………………………………………………………………………………………………… PAYS / COUNTRY : E-MAIL : … …………………………………………………………………………………………………… … ……………………………………………………………………………………………………………………………… N° TVA INTRA. / VAT NUMBER NOM / LAST NAME : … ……………………………………………………………………………………………… ……………………………………………………………………………………………………… FONCTION / FUNCTION : ………………………………………………………………………………………… GARANTIE BANCAIRE OUI / YES £ NON / NO £ BANK GARANTEE Montant / Amount :……………………………………………………………… ESPÈCES / CASH OUI / YES £ MOBILE : … ………………………………………………………………………………………………………………………… DATE : … ………………………………………………………………………………………………………………………………… NON / NO £ SIGNATURE : Montant / Amount :……………………………………………………………… CHÈQUE / CHECK OUI / YES £ NON / NO £ LUTÈCE INDUSTRIE Consultants internationaux en ventes industrielles 60, rue de Castagnary - 75015 PARIS Tél. : +33 (0)1 39 56 07 63 Fax. : +33 (0)9 70 60 56 68 info@lutece-industrie.com
