AX411 Access Point Hardware

Transcription

Published: 2012-08-30
Copyright © 2012, Juniper Networks, Inc.
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
Copyright © 2012, Juniper Networks, Inc. All rights reserved.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are
owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,
6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
All rights reserved.
The information in this document is current as of the date on the title page.
YEAR 2000 NOTICE
Juniper Networks hardware and software products are Year 2000 compliant. Junos OS has no known time-related limitations through the
year 2038. However, the NTP application is known to have some difficulty in the year 2036.
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions
of that EULA.
ii
Table of Contents
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Documentation Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Requesting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Opening a Case with JTAC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Part 1
Overview
Chapter 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
AX411 Access Point Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Deploying WLANs with AX411 Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Chapter 2
Components and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AX411 Access Point Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AX411 Access Point Front Panel and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
AX411 Access Point Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AX411 Access Point Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
AX411 Access Point Country and Channel Support . . . . . . . . . . . . . . . . . . . . . . . . . 11
AX411 Access Point Channels and Frequency Support . . . . . . . . . . . . . . . . . . . . . . 24
AX411 Access Point Antenna Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Part 2
Planning
Chapter 3
Preparing the Site for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Site Preparation Checklist for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . 33
General Site Guidelines for Installing the AX411 Access Point . . . . . . . . . . . . . . . . 35
Chapter 4
Safety and Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . 37
AX411 Access Point Definitions of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . 37
AX411 Access Point General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . 39
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Qualified Personnel Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Restricted Access Area Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Preventing Electrostatic Discharge Damage to the Access Point . . . . . . . . . . 42
AX411 Access Point Fire Suppression Procedures and Equipment . . . . . . . . . . . . 43
AX411 Access Point Installation Instructions Warnings . . . . . . . . . . . . . . . . . . . . . 44
AX411 Access Point Maintenance and Operational Safety Guidelines and
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Battery Handling Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Jewelry Removal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
iii
Lightning Activity Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Operating Temperature Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Product Disposal Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
AX411 Access Point Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . 50
In Case of Electrical Accident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . 50
AX411 Access Point Agency Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
AX411 Access Point Compliance Statements for EMC Requirements . . . . . . . . . . 52
AX411 Access Point Compliance Statements for Environmental
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
AX411 Access Point Compliance Statements for Acoustic Noise . . . . . . . . . . . . . . 54
AX411 Access Point WiFi Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Chapter 5
Power Guidelines, Requirements, and Specifications . . . . . . . . . . . . . . . . . . 57
AX411 Access Point Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . 57
AX411 Access Point Power Supply Specifications and Requirements . . . . . . . . . . 58
Chapter 6
Interface Cable Specifications and Connector Pinouts . . . . . . . . . . . . . . . . . 59
Interface Cable and Wire Specifications for the AX411 Access Point . . . . . . . . . . . 59
RJ-45 Connector Pinouts for the AX411 Access Point Ethernet Port . . . . . . . . . . . 59
RJ-45 Connector Pinouts for the AX411 Access Point Console Port . . . . . . . . . . . 60
Part 3
Installation
Chapter 7
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Tools and Parts Required to Install the AX411 Access Point . . . . . . . . . . . . . . . . . . 65
AX411 Access Point Setup Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Chapter 8
Unpacking the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Unpacking the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Verifying Parts Received with the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . 67
Chapter 9
Installing the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Installing the AX411 Access Point on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . 69
Installing the AX411 Access Point on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Installing the AX411 Access Point Mounting Bracket on a Wall . . . . . . . . . . . 69
Attaching the AX411 Access Point to a Mounting Bracket Installed on a
Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Installing the AX411 Access Point in an Overhead Enclosure . . . . . . . . . . . . . . . . . . 71
Installing the AX411 Access Point Mounting Bracket in an Overhead
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Attaching the AX411 Access Point to a Mounting Bracket in an Overhead
Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Connecting External Antennas to the AX411 Access Point . . . . . . . . . . . . . . . 73
Installing the Overhead Enclosure Containing the AX411 Access Point . . . . . 74
Removing the AX411 Access Point Plastic Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Chapter 10
Connecting and Powering On the Access Point . . . . . . . . . . . . . . . . . . . . . . . . 77
AX411 Access Point Connection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Connecting External Antennas to the AX411 Access Point . . . . . . . . . . . . . . . . . . . 79
Connecting the AX411 Access Point to the SRX Series Device . . . . . . . . . . . . . . . . 79
iv
Table of Contents
Providing Power to the AX411 Access Point Using Power over Ethernet . . . . . . . . 80
Providing Power to the AX411 Access Point Using the Power Supply . . . . . . . . . . 80
Powering On and Powering Off the AX411 Access point . . . . . . . . . . . . . . . . . . . . . 81
Part 4
Configuring
Chapter 11
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
AX411 Access Point Wireless LAN Initial Software Configuration Overview . . . . . 85
Chapter 12
Configuring the AX411 Access Point Wireless LAN . . . . . . . . . . . . . . . . . . . . . 87
Installing Licenses for the AX411 Access Point on the SRX Series Device . . . . . . . 87
Configuring AX411 Access Point Country-Specific Settings . . . . . . . . . . . . . . . . . . 88
Testing Connectivity to the AX411 Access Point Wireless LAN . . . . . . . . . . . . . . . . 92
AX411 Access Point Configuration Example: Layer 2 Mode (CLI) . . . . . . . . . . . . . . 93
AX411 Access Point Configuration Example: Layer 3 Mode (CLI) . . . . . . . . . . . . . . 94
Returning the AX411 Access Point to the Factory Default Settings . . . . . . . . . . . . 95
Part 5
Maintenance
Chapter 13
Maintaining the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Routine Maintenance Procedures for the AX411 Access Point . . . . . . . . . . . . . . . . 99
Part 6
Monitoring
Chapter 14
Monitoring the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Monitoring the AX411 Access Point with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . 103
Monitoring the AX411 Access Point with the Command-Line Interface . . . . . . . . 104
Chapter 15
Troubleshooting the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Troubleshooting the AX411 Access Point with the LEDs . . . . . . . . . . . . . . . . . . . . 107
Troubleshooting Communication Issues Between the AX411 Access Point and
the Services Gateway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Chapter 16
Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . 109
Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Chapter 17
Returning the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Return Procedure for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Locating the AX411 Access Point Component Serial Number and Agency
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Information You Might Need to Supply to Juniper Networks Technical Assistance
Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Packing the AX411 Access Point or Component for Shipment . . . . . . . . . . . . . . . . 113
Packing the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Packing the Components for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Part 7
Index
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
v
vi
List of Figures
Part 1
Overview
Chapter 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 1: AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Figure 2: Typical WLAN Deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 3: WLAN Deployment Using an Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . 5
Chapter 2
Figure 4: AX411 Access Point Front Panel and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 5: AX411 Access Point Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 6: Antenna Gain at 2.4 GHz, Vertical Orientation . . . . . . . . . . . . . . . . . . . . . 27
Figure 7: Antenna Gain at 2.4 GHz, Horizontal Orientation . . . . . . . . . . . . . . . . . . . 28
Figure 8: Antenna Gain at 5 GHz, Vertical Orientation . . . . . . . . . . . . . . . . . . . . . . 29
Figure 9: Antenna Gain at 5 GHz, Horizontal Orientation . . . . . . . . . . . . . . . . . . . . 30
Part 2
Planning
Chapter 4
Safety and Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 10: Placing a Component into an Electrostatic Bag . . . . . . . . . . . . . . . . . . . 42
Chapter 6
Figure 11: Ethernet Cable Connector (RJ-45) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Figure 12: Console Cable Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Part 3
Installation
Chapter 9
Installing the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Figure 13: Attaching the Mounting Bracket to a Wall . . . . . . . . . . . . . . . . . . . . . . . 70
Figure 14: Attaching the Access Point to the Mounting Bracket . . . . . . . . . . . . . . . 71
Figure 15: Installing the Mounting Bracket in an Overhead Enclosure . . . . . . . . . . 72
Figure 16: Attaching the Access Point to the Mounting Bracket . . . . . . . . . . . . . . . 73
Figure 17: Releasing the Plastic Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Chapter 10
Figure 18: AX411 Access Point Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 78
vii
viii
List of Tables
About the Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Table 1: Notice Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Table 2: Text and Syntax Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii
Part 1
Overview
Chapter 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 3: Maximum Number of Access Points per Services Gateway Type . . . . . . . 4
Chapter 2
Table 4: AX411 Access Point Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 5: AX411 Access Point Front Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 6: AX411 Access Point LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 7: AX411 Access Point Rear Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 8: AX411 Access Point Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 9: Country Codes and Wireless LAN Channels . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 10: AX411 Access Point 2.4 GHz Channels and Frequencies . . . . . . . . . . . . . 24
Table 11: AX411 Access Point 5 GHz Channels and Frequencies . . . . . . . . . . . . . . . 25
Table 12: Antenna Gain at 2.4 GHz, Vertical Orientation . . . . . . . . . . . . . . . . . . . . . 27
Table 13: Antenna Gain at 2.4 GHz, Horizontal Orientation . . . . . . . . . . . . . . . . . . 28
Table 14: Antenna Gain at 5 GHz, Vertical Orientation . . . . . . . . . . . . . . . . . . . . . . 29
Table 15: Antenna Gain at 5 GHz, Horizontal Orientation . . . . . . . . . . . . . . . . . . . . 30
Part 2
Planning
Chapter 3
Preparing the Site for Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Table 16: Site Preparation Checklist for the AX411 Access Point Installation . . . . . 33
Chapter 5
Power Guidelines, Requirements, and Specifications . . . . . . . . . . . . . . . . . . 57
Table 17: Site Electrical Wiring Guidelines for the AX411 Access Point . . . . . . . . . . 57
Table 18: Power Supply Electrical Specifications for the AX411 Access Point . . . . 58
Chapter 6
Table 19: Cable and Wire Specifications for Ports and on the AX411 Access
Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Table 20: RJ-45 Connector Pinouts for the Access Point Ethernet Port . . . . . . . . 60
Table 21: RJ-45 Connector Pinouts for Access Point Console Port . . . . . . . . . . . . . 61
Part 3
Installation
Chapter 7
Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Table 22: Installation Process Order for the AX411 Access Point . . . . . . . . . . . . . . 66
ix
Chapter 8
Unpacking the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Table 23: Parts List for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Chapter 10
Table 24: AX411 Access Point Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Part 4
Configuring
Chapter 11
Configuration Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Table 25: AX411 Access Point Wireless LAN Basic Software Configuration . . . . . . 86
Chapter 12
Configuring the AX411 Access Point Wireless LAN . . . . . . . . . . . . . . . . . . . . . 87
Table 26: AX411 Access Point Default Configuration Settings . . . . . . . . . . . . . . . . 92
Part 6
Monitoring
Chapter 14
Monitoring the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Table 27: Access Point LED Normal Indications . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Table 28: Access Point LED Starting Indications . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Chapter 15
Troubleshooting the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Table 29: Typical Access Point LED Problem Indications . . . . . . . . . . . . . . . . . . . 107
Chapter 17
Returning the Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Table 30: Return Procedure for the AX411 Access Point or Component . . . . . . . . . 111
x
About the Documentation
•
Documentation and Release Notes on page xi
•
Documentation Conventions on page xi
•
Documentation Feedback on page xiii
•
Requesting Technical Support on page xiii
Documentation and Release Notes
®
To obtain the most current version of all Juniper Networks technical documentation,
see the product documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs/.
If the information in the latest release notes differs from the information in the
documentation, follow the product Release Notes.
Juniper Networks Books publishes books by Juniper Networks engineers and subject
matter experts. These books go beyond the technical documentation to explore the
nuances of network architecture, deployment, and administration. The current list can
be viewed at http://www.juniper.net/books .
Documentation Conventions
Table 1 on page xii defines notice icons used in this guide.
xi
Table 1: Notice Icons
Icon
Meaning
Description
Informational note
Indicates important features or instructions.
Caution
Indicates a situation that might result in loss of data or hardware damage.
Warning
Alerts you to the risk of personal injury or death.
Laser warning
Alerts you to the risk of personal injury from a laser.
Table 2 on page xii defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
Convention
Description
Examples
Bold text like this
Represents text that you type.
To enter configuration mode, type
theconfigure command:
user@host> configure
Fixed-width text like this
Italic text like this
Italic text like this
Text like this
< > (angle brackets)
xii
Represents output that appears on the
terminal screen.
user@host> show chassis alarms
•
Introduces or emphasizes important
new terms.
•
•
Identifies book names.
A policy term is a named structure
that defines match conditions and
actions.
•
Identifies RFC and Internet draft titles.
•
Junos OS System Basics Configuration
Guide
•
RFC 1997, BGP Communities Attribute
No alarms currently active
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Configure the machine’s domain name:
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
•
To configure a stub area, include the
stub statement at the[edit protocols
ospf area area-id] hierarchy level.
•
The console port is labeled CONSOLE.
Enclose optional keywords or variables.
stub <default-metric metric>;
[edit]
root@# set system domain-name
domain-name
About the Documentation
Table 2: Text and Syntax Conventions (continued)
Convention
Description
Examples
| (pipe symbol)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
broadcast | multicast
# (pound sign)
Indicates a comment specified on the
same line as the configuration statement
to which it applies.
rsvp { # Required for dynamic MPLS only
[ ] (square brackets)
Enclose a variable for which you can
substitute one or more values.
community name members [
community-ids ]
Indention and braces ( { } )
Identify a level in the configuration
hierarchy.
; (semicolon)
Identifies a leaf statement at a
configuration hierarchy level.
(string1 | string2 | string3)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
J-Web GUI Conventions
Bold text like this
Represents J-Web graphical user
interface (GUI) items you click or select.
> (bold right angle bracket)
Separates levels in a hierarchy of J-Web
selections.
•
In the Logical Interfaces box, select
All Interfaces.
•
To cancel the configuration, click
Cancel.
In the configuration editor hierarchy,
select Protocols>Ospf.
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net, or fill out the documentation feedback form at
https://www.juniper.net/cgi-bin/docbugreport/ . If you are using e-mail, be sure to include
the following information with your comments:
•
Document or topic name
•
URL or page number
•
Software release version (if applicable)
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or JNASC support contract,
xiii
or are covered under warranty, and need post-sales technical support, you can access
our tools and resources online or open a case with JTAC.
•
JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf .
•
Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/ .
•
JTAC hours of operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•
Find CSC offerings: http://www.juniper.net/customers/support/
•
Search for known bugs: http://www2.juniper.net/kb/
•
Find product documentation: http://www.juniper.net/techpubs/
•
Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•
Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
•
Search technical bulletins for relevant hardware and software notifications:
https://www.juniper.net/alerts/
•
Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
•
Open a case online in the CSC Case Management tool: http://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool: https://tools.juniper.net/SerialNumberEntitlementSearch/
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•
Use the Case Management tool in the CSC at http://www.juniper.net/cm/ .
•
Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, see
http://www.juniper.net/support/requesting-support.html .
xiv
PART 1
Overview
•
Introduction on page 3
•
Components and Specifications on page 7
1
2
CHAPTER 1
Introduction
•
AX411 Access Point Description on page 3
•
Deploying WLANs with AX411 Access Points on page 4
AX411 Access Point Description
The Juniper Networks AX411 Access Point provides network access for wireless clients
such as laptop or desktop computers, personal digital assistants (PDAs), and any other
device equipped with a Wi-Fi adapter. The AX411 Access Point supports the new IEEE
802.11n wireless networking standard with backward compatibility for the IEEE 802.11a/b/g
standards.
Figure 1 on page 3 shows the AX411 Access Point.
g033100
Figure 1: AX411 Access Point
The AX411 Access Point is managed by a services gateway in the SRX200 line (SRX210,
SRX220, or SRX240) or an SRX650 Services Gateway. You manage and configure access
points through the command-line interface (CLI) and J-Web interface of the services
gateway.
You can connect and use up to two access points on the services gateway without
obtaining access point licenses. To use more than two access points, you must obtain
3
an additional access point license (SKU AX411-2) and install it on the services gateway.
You obtain access point licenses from your Juniper Networks representative or reseller.
Table 3 on page 4 shows the maximum number of access points supported for each
applicable services gateway type.
Table 3: Maximum Number of Access Points per Services Gateway Type
Services Gateway Type
Maximum Number of AX411 Access Points Supported
SRX210
4
SRX220
2
SRX240
4
SRX650
4
NOTE: If you have previously deployed a greater number of access points
per services gateway than specified in Table 3 on page 4, we recommend
that when practical you reduce the number of access points to those specified.
If you want to deploy more than four access points, we recommend that you
use Juniper Networks WLA Series Wireless LAN access points and WLC Series
Wireless LAN Controllers.
Related
Documentation
•
•
AX411 Access Point Physical Specifications on page 7
•
AX411 Access Point Front Panel and LEDs on page 8
•
AX411 Access Point Rear Panel on page 9
Deploying WLANs with AX411 Access Points
To deploy a wireless network with AX411 Access Points, you install one or more access
points throughout your site and connect them to Ethernet ports on the services gateway
that manages the access points. You can provide power to the access points using Power
over Ethernet (PoE) by connecting them to services gateway ports that have PoE
capability. You can also provide power to the access points using either optional external
power supplies or PoE adapters.
You can connect the access points either directly to the SRX Series device or to a Layer
2 switch that is connected to the SRX Series device.
Figure 2 on page 5 shows a typical WLAN deployment in which four AX411 Access Points
are connected directly to an SRX210 Services Gateway.
4
Chapter 1: Introduction
Figure 2: Typical WLAN Deployment
g033104
Inte rne t
Figure 3 on page 5 shows a WLAN deployment in which four AX411 Access Points are
connected to an EX4200 Ethernet switch that is connected to an SRX210 Services
Gateway.
Figure 3: WLAN Deployment Using an Ethernet Switch
g033107
Inte rne t
5
Related
Documentation
6
•
•
•
•
CHAPTER 2
Components and Specifications
•
•
•
•
AX411 Access Point Features on page 10
•
AX411 Access Point Country and Channel Support on page 11
•
AX411 Access Point Channels and Frequency Support on page 24
•
AX411 Access Point Antenna Specifications on page 27
AX411 Access Point Physical Specifications
Table 4 on page 7 lists the physical specifications of the AX411 Access Point.
Table 4: AX411 Access Point Specifications
Specification
Value
Height
•
1.75 in. (44.4 mm) excluding antennas
•
5.9 in. (150 mm) with supplied antennas
Width
9.5 in. (241 mm)
Depth
•
6.3 in. (160 mm) excluding antennas
•
7.4 in. (188 mm) with supplied antennas
Weight
2.33 lb (1.05 kg) with supplied antennas
Altitude
No performance degradation up to 10,000 ft (3048
m)
Temperature
Normal operation ensured in temperature range of
32°F (0°C) to 122°F (50°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Maximum input power
12.4 watts (1.03 amps at 12 VDC) from optional power
supply or 12.4 watts from PoE
7
Table 4: AX411 Access Point Specifications (continued)
Specification
Value
Maximum thermal output
42.3 BTU
NOTE: These specifications are
estimates and subject to change.
Noise level
70 dB(A) or less per EN ISO 7779
CAUTION: Before removing or installing components of a functioning access
point, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the access point.
Related
Documentation
•
•
•
•
AX411 Access Point Front Panel and LEDs
Figure 4 on page 8 shows the front panel and LEDs of the AX411 Access Point.
Figure 4: AX411 Access Point Front Panel and LEDs
1
2
3
4
g033101
5
Table 5 on page 9 describes the front panel features of the access point.
8
Chapter 2: Components and Specifications
Table 5: AX411 Access Point Front Panel Features
Number
Component
1
Power connector (use only when not providing power to the access point with
PoE
2
Ethernet port for connecting the access point to the SRX Series device
3
Console port for diagnostics and troubleshooting
4
Slot for securing the access point with a standard laptop locking cable
5
LEDs; described in Table 6 on page 9
Table 6 on page 9 describes the access point LEDs.
Table 6: AX411 Access Point LEDs
Name
Color
State
Description
Power
Green
On steadily
The access point is receiving power.
Off
The access point is off.
Red
On steadily
The access point is starting up.
Green
On steadily
The access point is being managed by the
SRX Series Services Gateway.
Off
The access point is unmanaged.
Flashing
The 5 GHz radio is enabled and
broadcasting.
Off
The 5 GHz radio is disabled.
Flashing
The 2.4 GHz radio is enabled and
broadcasting.
Off
The 2.4 GHz radio is disabled.
Status
5 GHz Radio
2.4 GHz Radio
Related
Documentation
Blue
Green
•
•
AX411 Access Point Rear Panel
Figure 5 on page 10 shows the rear panel of the AX411 Access Point.
9
Figure 5: AX411 Access Point Rear Panel
1
2
g033102
1
1
Table 7 on page 10 describes the rear panel features of the access point.
Table 7: AX411 Access Point Rear Panel Features
Related
Documentation
Number
Component
1
Antennas
2
Locking screw for securing the access point to the optional mounting bracket for
wall or overhead installations
•
•
AX411 Access Point Features
The AX411 Access Point provides the features listed in Table 8 on page 10.
Table 8: AX411 Access Point Features
Hardware Feature
Description
Power input
Power over Ethernet (PoE) or optional power supply
Software Feature
Description
Internet protocol
IPv4
IP address management
Static addresses
Dynamic Host Configuration Protocol (DHCP) client
10
Table 8: AX411 Access Point Features (continued)
WLAN security
MAC Filtering
WEP
WPA Personal and Enterprise
WPA2 Personal and Enterprise
802.1x
System management
Autoinstallation
J-Web browser interface—for SRX Series device configuration
and management
Junos XML protocol XML application programming interface
(API)
Junos OS command-line interface (CLI)—for SRX Series
device configuration and management through the console,
Telnet, SSH, or J-Web CLI terminal
Network and Security Manager (NSM)
Related
Documentation
•
•
•
AX411 Access Point Country and Channel Support
Table 9 on page 11 shows the 2.4 GHz and 5 GHz channels supported for each country
code. It also shows whether 802.11n and 40MHz channel width are supported.
Table 9: Country Codes and Wireless LAN Channels
Channels Supported
40 MHz
Supported
Radio
1
(5
GHz)
Country
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
AE
United Arab
Emirates
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
Y
Y
N
AG
Antigua and
Barbuda
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
Country
Code
11
Table 9: Country Codes and Wireless LAN Channels (continued)
Channels Supported
40 MHz
Supported
Radio
1
(5
GHz)
Country
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
AN
Netherlands
Antilles
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
AR
Argentina
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
52 56 60 64 149 153 157 161
165
Y
Y
Y
AS
American
Samoa
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
AT
Austria
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
AU
Australia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
AW
Aruba
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
AZ
Azerbaijan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
BA
Bosnia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
BB
Barbados
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
BD
Bangladesh
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161 165
Y
Y
Y
BE
Belgium
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
BG
Bulgaria
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
Country
Code
12
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
BH
Bahrain
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
BM
Bermuda
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
BN
Brunei
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
BO
Bolivia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
BR
Brazil
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
BS
Bahamas
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
BT
Bhutan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
BY
Belarus
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
CA
Canada
FCC
AX411-US
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140 149 153 157 161 165
Y
Y
Y
CH
Switzerland
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
CL
Chile
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
CN
China
Telec
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161 165
Y
Y
Y
13
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
CO
Colombia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
CR
Costa Rica
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
CU
Cuba
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161
N
N
N
CV
Cape Verde
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
CY
Cyprus
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
CZ
Czech Republic
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
DE
Germany
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
DK
Denmark
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
DM
Dominica
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
DO
Dominican
Republic
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
EC
Ecuador
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
14
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
EE
Estonia
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
N
N
EG
Egypt
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
ES
Spain
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
N
N
FI
Finland
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
FK
Falkland
Islands
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
FM
Federated
States of
Micronesia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
FR
France
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
GB
United
Kingdom
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
N
N
GF
French Guiana
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
Y
Y
Y
GG
Guernsey
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
GI
Gibralter
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
15
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
GP
Guadeloupe
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
GR
Greece
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
GT
Guatemala
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
GU
Guam
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
HK
Hong Kong
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
HN
Honduras
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161 165
N
N
N
HR
Croatia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
Y
Y
Y
HT
Haiti
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
HU
Hungary
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
ID
Indonesia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
Y
Y
N
IE
Ireland
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
IL
Israel
TELEC
AX411-IL
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
Y
Y
Y
16
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
IM
Isle of Man
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
IN
India
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
IR
Iran
World
AX411-W
None
149 153 157 161
N
N
N
IS
Iceland
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
IT
Italy
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
JE
Jersey
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
JM
Jamaica
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161 165
Y
Y
Y
JO
Jordan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48
Y
Y
Y
JP
Japan
TELEC
AX411-JP
1 2 3 4 5 6 7 8 9 10 11
12 13 14
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
Y
N
Y
KE
Kenya
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48
N
N
N
KI
Kiribati
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
KR
Korea Republic
TELEC
AX411-KR
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161
N
N
N
KW
Kuwait
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
17
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
KY
Cayman Islands
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
LA
LAO People's
Democratic
Republic
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
LB
Lebanon
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
LI
Liechtenstein
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
LK
Sri Lanka
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
LS
Lesotho
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
LT
Lithuania
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
LU
Luxembourg
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
LV
Latvia
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
N
N
MA
Morocco
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48
Y
Y
Y
MC
Monaco
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
N
N
N
18
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
MK
Macedonia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
MO
Macao
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161
N
N
N
MP
Northern
Mariana Islands
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
MQ
Martinique
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
MR
Mauritania
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
MT
Malta
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
MU
Mauritius
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
MV
Maldives
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
MW
Malawi
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
MX
Mexico
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
Y
Y
Y
MY
Malaysia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
NG
Nigeria
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
19
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
NI
Nicaragua
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
NL
Netherlands
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
NO
Norway
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
NZ
New Zealand
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
OM
Oman
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
PA
Panama
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
PE
Peru
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
PG
Papua New
Guinea
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
PH
Philippines
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
PK
Pakistan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161 165
Y
Y
Y
PL
Poland
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
20
Channels Supported
40 MHz
Supported
Radio
1
(5
GHz)
Country
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
PM
St. Pierre and
Miquelon
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
N
N
N
PR
Puerto Rico
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
PT
Portugal
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
RE
Reunion
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
RO
Romania
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
RU
Russia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
SA
Saudi Arabia
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161
Y
Y
Y
SE
Sweden
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
SG
Singapore
TELEC
AX411-SG
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
SI
Slovenia
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
SK
Slovak
Republic
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
N
N
SV
El Salvador
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
N
N
N
Country
Code
21
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
SY
Syria
World
AX411-W
None
149 153 157 161
N
N
N
TH
Thailand
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
TJ
Tajikistan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
TN
Tunisia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
TR
Turkey
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 132 136
140
Y
Y
Y
TT
Trinidad &
Tobago
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
TW
Taiwan
TELEC
AX411-TW
1 2 3 4 5 6 7 8 9 10 11
56 60 64 149 153 157 161 165
Y
Y
Y
TZ
Tanzania
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
149 153 157 161
N
N
N
UA
Ukraine
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
UM
United States
(Minor Outlying
Islands)
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
US
United States
FCC
AX411-US
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
22
Channels Supported
40 MHz
Supported
Band
Plan/SKU
Radio 2
(2.4 GHz)
Radio 1
(5 GHz)
802.11n
Support
Radio
2
(2.4
GHz)
Radio
1
(5
GHz)
Country
Code
Country
UY
Uruguay
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
Y
Y
Y
UZ
Uzbekistan
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
VA
Holy See
(Vatican City
State)
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
None
N
N
N
VE
Venezuela
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
VG
Virgin Islands
(British)
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
VI
Virgin Islands
(United States)
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140 149 153 157
161 165
N
N
N
VN
Vietnam
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
149 153 157 161 165
Y
Y
Y
YT
Mayotte
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
ZA
South Africa
ETSI
AX411-E
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
Y
Y
Y
ZM
Zambia
World
AX411-W
1 2 3 4 5 6 7 8 9 10 11
12 13
36 40 44 48 52 56 60 64
100 104 108 112 116 120 124
128 132 136 140
N
N
N
Related
Documentation
•
AX411 Access Point Channels and Frequency Support on page 24
23
AX411 Access Point Channels and Frequency Support
Table 10 on page 24 shows the 2.4 GHz channels and center frequencies supported by
the access point. Each channel is 22 MHz wide, and the channels are (with one exception)
spaced 5 MHz apart, so adjacent channels will overlap and interfere with each other. The
usual practice is to use non-overlapping channels such as 1, 6, and 11.
The exception to the 5 MHz spacing is channel 14, which is separated from channel 13 by
12 MHz. Channel 14 is used only in Japan.
Table 10: AX411 Access Point 2.4 GHz Channels and Frequencies
Channel
Center Frequency (MHz)
1
2412
2
2417
3
2422
4
2427
5
2432
6
2437
7
2442
8
2447
9
2452
10
2457
11
2462
12
2467
13
2472
14
2484
Table 11 on page 25 shows the 5 GHz channels and center frequencies supported by the
access point. Each channel is either 20 MHz or 40 MHz wide, depending on mode. The
channels spacing varies between 5 and 45 MHz, so adjacent channels will often overlap
and interfere with each other. As with 2.4 GHz channels, the usual practice is to use only
non-overlapping channels.
24
Table 11: AX411 Access Point 5 GHz Channels and Frequencies
Channel
36
5180
38
5190
40
5200
42
5210
44
5220
46
5230
48
5240
52
5260
56
5280
60
5300
64
5320
100
5500
104
5520
108
5540
112
5560
116
5580
120
5600
124
5620
128
5640
132
5660
136
5680
140
5700
149
5745
153
5765
25
Table 11: AX411 Access Point 5 GHz Channels and Frequencies (continued)
Related
Documentation
26
•
Channel
157
5785
161
5805
165
5825
183
4915
184
4920
185
4925
187
4935
188
4940
189
4945
192
4960
196
4980
AX411 Access Point Antenna Specifications
Figure 6 on page 27 and Table 12 on page 27 show the antenna gain by degree in vertical
orientation at 2.4 GHz.
g033109
Figure 6: Antenna Gain at 2.4 GHz, Vertical Orientation
Table 12: Antenna Gain at 2.4 GHz, Vertical Orientation
Average gain
0.58 dB
Maximum gain
2.35 dB at 360°
Minimum gain
-1.43 dB at 135°
27
Figure 7 on page 28 and Table 13 on page 28 show the antenna gain by degree in horizontal
orientation at 2.4 GHz.
g033111
Figure 7: Antenna Gain at 2.4 GHz, Horizontal Orientation
Table 13: Antenna Gain at 2.4 GHz, Horizontal Orientation
28
Average gain
-4.14 dB
Maximum gain
0.65 dB at 354°
Minimum gain
-20.88 dB at 270°
Figure 8 on page 29 and Table 14 on page 29 show the antenna gain by degree in vertical
orientation at 5 GHz.
g033112
Figure 8: Antenna Gain at 5 GHz, Vertical Orientation
Table 14: Antenna Gain at 5 GHz, Vertical Orientation
Average gain
2.29 dB
Maximum gain
5.02 dB at 354°
Minimum gain
-0.59 dB at 252°
29
Figure 9 on page 30 and Table 15 on page 30 show the antenna gain by degree in horizontal
orientation at 5 GHz.
g033114
Figure 9: Antenna Gain at 5 GHz, Horizontal Orientation
Table 15: Antenna Gain at 5 GHz, Horizontal Orientation
30
Average gain
-2.83 dB
Maximum gain
4.95 dB at 174°
Minimum gain (dB)
-37.51 dB at 60°
PART 2
Planning
•
Preparing the Site for Installation on page 33
•
Safety and Regulatory Compliance Information on page 37
•
Power Guidelines, Requirements, and Specifications on page 57
•
Interface Cable Specifications and Connector Pinouts on page 59
31
32
CHAPTER 3
Preparing the Site for Installation
•
Site Preparation Checklist for the AX411 Access Point on page 33
•
General Site Guidelines for Installing the AX411 Access Point on page 35
Site Preparation Checklist for the AX411 Access Point
The checklist in Table 16 on page 33 summarizes the tasks you need to perform when
preparing a site for installing the AX411 Access Point.
Table 16: Site Preparation Checklist for the AX411 Access Point Installation
Item or Task
For More Information
Performed By
Date
Notes
Environment
Verify that
environmental factors
such as temperature
and humidity do not
exceed device
tolerances.
“AX411 Access Point Physical
Specifications” on page 7
Power
Measure distance
between external
power sources and
device installation site.
“AX411 Access Point Site
Electrical Wiring Guidelines”
on page 57
Wall Installation
Obtain the required
wall mount bracket.
Verify that the area
selected meets the
minimum
requirements.
33
Table 16: Site Preparation Checklist for the AX411 Access Point Installation (continued)
Item or Task
Verify that you have
the required hardware
to proceed with the
installation.
“Tools and Parts Required to
Install the AX411 Access Point”
on page 65
Performed By
Date
Notes
Desktop Installation
selected meets the
minimum
requirements.
the required hardware
to proceed with the
installation.
on page 65
Overhead Installation
Obtain the required
overhead enclosure.
selected meets the
minimum
requirements.
the required tools and
parts to proceed with
the installation.
on page 65
Install the access
point mounting
bracket inside the
enclosure.
“Installing the AX411 Access
Point Mounting Bracket in an
Overhead Enclosure” on
page 72
Attach the access
point to the mounting
bracket.
“Attaching the AX411 Access
Point to a Mounting Bracket in
an Overhead Enclosure” on
page 72
Install the enclosure
containing the access
point.
See the instructions provided
with the overhead enclosure.
Cables
Acquire cables and
connectors.
34
“Interface Cable and Wire
Specifications for the AX411
Access Point” on page 59
Chapter 3: Preparing the Site for Installation
Table 16: Site Preparation Checklist for the AX411 Access Point Installation (continued)
Item or Task
Performed By
Date
Notes
Review the maximum
distance allowed for
each cable. Choose
the length of cable
based on the distance
between the hardware
components being
connected.
Plan the cable routing
and management.
Related
Documentation
•
•
Tools and Parts Required to Install the AX411 Access Point on page 65
•
AX411 Access Point Setup Overview on page 65
General Site Guidelines for Installing the AX411 Access Point
Observe the following general guidelines when installing the AX411 Access Point:
Related
Documentation
•
To prevent overheating, the airflow around the chassis must be unrestricted. Allow
sufficient clearance between the front and back of the chassis and adjacent equipment.
Ensure that there is adequate circulation in the installation location.
•
Follow the electrostatic discharge (ESD) procedures to avoid damaging equipment.
ESD can cause components to fail completely or intermittently over time.
•
•
•
35
36
CHAPTER 4
Safety and Regulatory Compliance
Information
•
AX411 Access Point Definitions of Safety Warning Levels on page 37
•
AX411 Access Point General Safety Guidelines and Warnings on page 39
•
AX411 Access Point Fire Suppression Procedures and Equipment on page 43
•
AX411 Access Point Installation Instructions Warnings on page 44
•
AX411 Access Point Maintenance and Operational Safety Guidelines and
Warnings on page 45
•
AX411 Access Point Electrical Safety Guidelines and Warnings on page 50
•
AX411 Access Point Agency Approvals on page 51
•
AX411 Access Point Compliance Statements for EMC Requirements on page 52
•
AX411 Access Point Compliance Statements for Environmental
Requirements on page 53
•
AX411 Access Point Compliance Statements for Acoustic Noise on page 54
•
AX411 Access Point WiFi Interoperability on page 54
AX411 Access Point Definitions of Safety Warning Levels
This guide uses the following three levels of safety warnings:
NOTE: You might find this information helpful in a particular situation or
might otherwise overlook it.
CAUTION: You need to observe the specified guidelines to avoid minor injury
or discomfort to you or severe damage to the access point.
WARNING: This symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
37
involved with electrical circuitry and be familiar with standard practices for
preventing accidents.
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in
een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige
apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische
schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard
maatregelen om ongelukken te voorkomen.
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi
johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa,
ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista
onnettomuuksien ehkäisykeinoista.
Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez
dans une situation pouvant causer des blessures ou des dommages corporels.
Avant de travailler sur un équipement, soyez conscient des dangers posés
par les circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents.
Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer
Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der
Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen
Stromkreisen verbundenen Gefahren und der Standardpraktiken zur
Vermeidung von Unfällen bewußt.
Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione
potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi
apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed
essere al corrente delle pratiche standard per la prevenzione di incidenti.
Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som
kan føre til personskade. Før du utfører arbeid på utstyr, må du vare
oppmerksom på de faremomentene som elektriske kretser innebærer, samt
gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker.
Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que
lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer
equipamento, familiarize-se com os perigos relacionados com circuitos
eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis
acidentes.
¡Atención! Este símbolo de aviso significa peligro. Existe riesgo para su
integridad física. Antes de manipular cualquier equipo, considerar los riesgos
que entraña la corriente eléctrica y familiarizarse con los procedimientos
estándar de prevención de accidentes.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation
som kan leda till personskada. Innan du utför arbete på någon utrustning
38
Chapter 4: Safety and Regulatory Compliance Information
måste du vara medveten om farorna med elkretsar och känna till vanligt
förfarande för att förebygga skador.
Related
Documentation
•
•
•
•
AX411 Access Point Maintenance and Operational Safety Guidelines and Warnings on
page 45
•
•
AX411 Access Point General Safety Guidelines and Warnings
•
General Safety Guidelines and Warnings on page 39
•
Qualified Personnel Warning on page 40
•
Restricted Access Area Warning on page 40
•
Preventing Electrostatic Discharge Damage to the Access Point on page 42
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the access point from
damage. The list of guidelines might not address all potentially hazardous situations in
your working environment, so be alert and exercise good judgment at all times.
•
Perform only the procedures explicitly described in this guide. Make sure that only
authorized service personnel perform other system services.
•
Keep the area around the chassis clear and free from dust before, during, and after
installation.
•
Keep tools away from areas where people could trip on them.
•
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
•
Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
•
Never install or manipulate wiring during electrical storms.
•
Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
•
Do not open or remove chassis covers or sheet metal parts unless instructions are
provided in this guide. Such an action could cause severe electrical shock.
•
Do not push or force any objects through any opening in the chassis frame. Such an
action could result in electrical shock or fire.
39
•
Avoid spilling liquid onto the access point chassis or onto any access point component.
Such an action could cause electrical shock or damage the access point.
•
Avoid touching uninsulated electrical wires or terminals that have not been
disconnected from their power source. Such an action could cause electrical shock.
Qualified Personnel Warning
WARNING: Only trained and qualified personnel should install or replace the
access point.
Waarschuwing Installatie en reparaties mogen uitsluitend door getraind en
bevoegd personeel uitgevoerd worden.
Varoitus Ainoastaan koulutettu ja pätevä henkilökunta saa asentaa tai vaihtaa
tämän laitteen.
Attention Tout installation ou remplacement de l'appareil doit être réalisé
par du personnel qualifié et compétent.
Warnung Gerät nur von geschultem, qualifiziertem Personal installieren oder
auswechseln lassen.
Avvertenza Solo personale addestrato e qualificato deve essere autorizzato
ad installare o sostituire questo apparecchio.
Advarsel Kun kvalifisert personell med riktig opplæring bør montere eller
bytte ut dette utstyret.
Aviso Este equipamento deverá ser instalado ou substituído apenas por
pessoal devidamente treinado e qualificado.
¡Atención! Estos equipos deben ser instalados y reemplazados
exclusivamente por personal técnico adecuadamente preparado y capacitado.
Varning! Denna utrustning ska endast installeras och bytas ut av utbildad
och kvalificerad personal.
Restricted Access Area Warning
WARNING: The access point is intended for installation in restricted access
areas. A restricted access area is an area to which access can be gained only
by service personnel through the use of a special tool, lock and key, or other
means of security, and which is controlled by the authority responsible for
the location.
Waarschuwing Dit toestel is bedoeld voor installatie op plaatsen met beperkte
toegang. Een plaats met beperkte toegang is een plaats waar toegang slechts
door servicepersoneel verkregen kan worden door middel van een speciaal
40
instrument, een slot en sleutel, of een ander veiligheidsmiddel, en welke
beheerd wordt door de overheidsinstantie die verantwoordelijk is voor de
locatie.
Varoitus Tämä laite on tarkoitettu asennettavaksi paikkaan, johon pääsy on
rajoitettua. Paikka, johon pääsy on rajoitettua, tarkoittaa paikkaa, johon vain
huoltohenkilöstö pääsee jonkin erikoistyökalun, lukkoon sopivan avaimen
tai jonkin muun turvalaitteen avulla ja joka on paikasta vastuussa olevien
toimivaltaisten henkilöiden valvoma.
Attention Cet appareil est à installer dans des zones d'accès réservé. Ces
dernières sont des zones auxquelles seul le personnel de service peut accéder
en utilisant un outil spécial, un mécanisme de verrouillage et une clé, ou tout
autre moyen de sécurité. L'accès aux zones de sécurité est sous le contrôle
de l'autorité responsable de l'emplacement.
Warnung Diese Einheit ist zur Installation in Bereichen mit beschränktem
Zutritt vorgesehen. Ein Bereich mit beschränktem Zutritt ist ein Bereich, zu
dem nur Wartungspersonal mit einem Spezialwerkzeugs, Schloß und
Schlüssel oder anderer Sicherheitsvorkehrungen Zugang hat, und der von
dem für die Anlage zuständigen Gremium kontrolliert wird.
Avvertenza Questa unità deve essere installata in un'area ad accesso limitato.
Un'area ad accesso limitato è un'area accessibile solo a personale di
assistenza tramite un'attrezzo speciale, lucchetto, o altri dispositivi di
sicurezza, ed è controllata dall'autorità responsabile della zona.
Advarsel Denne enheten er laget for installasjon i områder med begrenset
adgang. Et område med begrenset adgang gir kun adgang til servicepersonale
som bruker et spesielt verktøy, lås og nøkkel, eller en annen
sikkerhetsanordning, og det kontrolleres av den autoriteten som er ansvarlig
for området.
Aviso Esta unidade foi concebida para instalação em áreas de acesso restrito.
Uma área de acesso restrito é uma área à qual apenas tem acesso o pessoal
de serviço autorizado, que possua uma ferramenta, chave e fechadura
especial, ou qualquer outra forma de segurança. Esta área é controlada pela
autoridade responsável pelo local.
¡Atención! Esta unidad ha sido diseñada para instalarse en áreas de acceso
restringido. Área de acceso restringido significa un área a la que solamente
tiene acceso el personal de servicio mediante la utilización de una herramienta
especial, cerradura con llave, o algún otro medio de seguridad, y que está
bajo el control de la autoridad responsable del local.
Varning! Denna enhet är avsedd för installation i områden med begränsat
tillträde. Ett område med begränsat tillträde får endast tillträdas av
servicepersonal med ett speciellt verktyg, lås och nyckel, eller annan
säkerhetsanordning, och kontrolleras av den auktoritet som ansvarar för
området.
41
Preventing Electrostatic Discharge Damage to the Access Point
Many access point hardware components are sensitive to damage from static electricity.
Some components can be impaired by voltages as low as 30 V. You can easily generate
potentially damaging static voltages whenever you handle plastic or foam packing
material or if you move components across plastic or carpets. Observe the following
guidelines to minimize the potential for electrostatic discharge (ESD) damage, which
can cause intermittent or complete component failures:
•
Always use an ESD wrist strap or ankle strap, and verify that it is in direct contact with
your skin.
CAUTION: For safety, periodically check the resistance value of the ESD
strap. The measurement should be in the range of 1 to 10 Mohms.
•
When handling any component that is removed from the chassis, verify that the
equipment end of your ESD strap is attached to one of the ESD points on the chassis.
•
Avoid contact between the component and your clothing. ESD voltages emitted from
clothing can still damage components.
•
When removing or installing a component, always place it component-side up on an
antistatic surface, in an antistatic card rack, or in an electrostatic bag. If you are returning
a component, place it into an electrostatic bag before packing it.
Figure 10: Placing a Component into an Electrostatic Bag
Related
Documentation
42
•
•
•
•
page 45
•
•
AX411 Access Point Fire Suppression Procedures and Equipment
In the event of a fire emergency involving devices and other network equipment, the
safety of people is the primary concern. Establish procedures for protecting people in
the event of a fire emergency, provide safety training, and properly provision fire-control
equipment and fire extinguishers.
In addition, establish procedures to protect your equipment in the event of a fire
emergency. Juniper Networks products should be installed in an environment suitable
for electronic equipment. We recommend that fire suppression equipment be available
in the event of a fire in the vicinity of the equipment and that all local fire, safety, and
electrical codes and ordinances be observed when installing and operating your
equipment.
In the event of an electrical hazard or an electrical fire, first turn power off to the equipment
at the source. Then use a Type C fire extinguisher to extinguish the fire. Type C fire
extinguishers, which use noncorrosive fire retardants such as carbon dioxide (CO ) and
2
Halotron™, are most effective for suppressing electrical fires. Type C fire extinguishers
displace the oxygen from the point of combustion to eliminate the fire. For extinguishing
fire on or around equipment that draws air from the environment for cooling, use this
type of inert oxygen displacement extinguisher instead of an extinguisher that leave
residues on equipment.
Do not use multipurpose Type ABC chemical fire extinguishers (dry chemical fire
extinguishers) near Juniper Networks equipment. The primary ingredient in these fire
extinguishers is monoammonium phosphate, which is very sticky and difficult to clean.
In addition, in minute amounts of moisture, monoammonium phosphate can become
highly corrosive and corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warranties effective, do not use a dry chemical fire extinguisher
to control a fire at or near a Juniper Networks access point. If a dry chemical
fire extinguisher is used, the unit is no longer eligible for coverage under a
service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
Related
Documentation
•
•
43
•
•
page 45
•
•
AX411 Access Point Installation Instructions Warnings
WARNING: Read the installation instructions before you connect the access
point to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultare le istruzioni di installazione prima di collegare il sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Related
Documentation
44
•
•
•
•
page 45
•
•
AX411 Access Point Maintenance and Operational Safety Guidelines and Warnings
•
Battery Handling Warning on page 45
•
Jewelry Removal Warning on page 46
•
Lightning Activity Warning on page 47
•
Operating Temperature Warning on page 48
•
Product Disposal Warning on page 49
Battery Handling Warning
WARNING: Replacing the battery incorrectly might result in an explosion.
Replace the battery only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen
wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat
door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig
fabrieksvoorschriften weggeworpen te worden.
Varoitus Räjähdyksen vaara, jos akku on vaihdettu väärään akkuun. Käytä
vaihtamiseen ainoastaan saman- tai vastaavantyyppistä akkua, joka on
valmistajan suosittelema. Hävitä käytetyt akut valmistajan ohjeiden mukaan.
Attention Danger d'explosion si la pile n'est pas remplacée correctement.
Ne la remplacer que par une pile de type semblable ou équivalent,
recommandée par le fabricant. Jeter les piles usagées conformément aux
instructions du fabricant.
Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr.
Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller
empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den
Anweisungen des Herstellers.
Avvertenza Pericolo di esplosione se la batteria non è installata
correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata
dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore.
Advarsel Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte.
Skift kun med samme eller tilsvarende type som er anbefalt av produsenten.
Kasser brukte batterier i henhold til produsentens instruksjoner.
Aviso Existe perigo de explosão se a bateria for substituída incorrectamente.
Substitua a bateria por uma bateria igual ou de um tipo equivalente
recomendado pelo fabricante. Destrua as baterias usadas conforme as
instruções do fabricante.
45
¡Atención! Existe peligro de explosión si la batería se reemplaza de manera
incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el
equivalente recomendado por el fabricante. Desechar las baterías gastadas
según las instrucciones del fabricante.
Varning! Explosionsfara vid felaktigt batteribyte. Ersätt endast batteriet med
samma batterityp som rekommenderas av tillverkaren eller motsvarande.
Följ tillverkarens anvisningar vid kassering av använda batterier.
Jewelry Removal Warning
WARNING: Before working on equipment that is connected to power lines,
remove jewelry, including rings, necklaces, and watches. Metal objects heat
up when connected to power and ground and can cause serious burns or
weld the metal object to the terminals.
Waarschuwing Alvorens aan apparatuur te werken die met elektrische
leidingen is verbonden, sieraden (inclusief ringen, kettingen en horloges)
verwijderen. Metalen voorwerpen worden warm wanneer ze met stroom en
aarde zijn verbonden, en kunnen ernstige brandwonden veroorzaken of het
metalen voorwerp aan de aansluitklemmen lassen.
Varoitus Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden
parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien).
Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan
kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet
kiinni liitäntänapoihin.
Attention Avant d'accéder à cet équipement connecté aux lignes électriques,
ôter tout bijou (anneaux, colliers et montres compris). Lorsqu'ils sont branchés
à l'alimentation et reliés à la terre, les objets métalliques chauffent, ce qui
peut provoquer des blessures graves ou souder l'objet métallique aux bornes.
Warnung Vor der Arbeit an Geräten, die an das Netz angeschlossen sind,
jeglichen Schmuck (einschließlich Ringe, Ketten und Uhren) abnehmen.
Metallgegenstände erhitzen sich, wenn sie an das Netz und die Erde
angeschlossen werden, und können schwere Verbrennungen verursachen
oder an die Anschlußklemmen angeschweißt werden.
Avvertenza Prima di intervenire su apparecchiature collegate alle linee di
alimentazione, togliersi qualsiasi monile (inclusi anelli, collane, braccialetti
ed orologi). Gli oggetti metallici si riscaldano quando sono collegati tra punti
di alimentazione e massa: possono causare ustioni gravi oppure il metallo
può saldarsi ai terminali.
Advarsel Fjern alle smykker (inkludert ringer, halskjeder og klokker) før du
skal arbeide på utstyr som er koblet til kraftledninger. Metallgjenstander som
46
er koblet til kraftledninger og jord blir svært varme og kan forårsake alvorlige
brannskader eller smelte fast til polene.
Aviso Antes de trabalhar em equipamento que esteja ligado a linhas de
corrente, retire todas as jóias que estiver a usar (incluindo anéis, fios e
relógios). Os objectos metálicos aquecerão em contacto com a corrente e
em contacto com a ligação à terra, podendo causar queimaduras graves ou
ficarem soldados aos terminais.
¡Atención! Antes de operar sobre equipos conectados a líneas de
alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los
objetos de metal se calientan cuando se conectan a la alimentación y a tierra,
lo que puede ocasionar quemaduras graves o que los objetos metálicos
queden soldados a los bornes.
Varning! Tag av alla smycken (inklusive ringar, halsband och armbandsur)
innan du arbetar på utrustning som är kopplad till kraftledningar. Metallobjekt
hettas upp när de kopplas ihop med ström och jord och kan förorsaka
allvarliga brännskador; metallobjekt kan också sammansvetsas med
kontakterna.
Lightning Activity Warning
WARNING: Do not work on the system or connect or disconnect cables during
periods of lightning activity.
Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet
aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.
Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota
kaapeleita ukkosilmalla.
Attention Ne pas travailler sur le système ni brancher ou débrancher les
câbles pendant un orage.
Warnung Arbeiten Sie nicht am System und schließen Sie keine Kabel an
bzw. trennen Sie keine ab, wenn es gewittert.
Avvertenza Non lavorare sul sistema o collegare oppure scollegare i cavi
durante un temporale con fulmini.
Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet
når det tordner eller lyner.
Aviso Não trabalhe no sistema ou ligue e desligue cabos durante períodos
de mau tempo (trovoada).
¡Atención! No operar el sistema ni conectar o desconectar cables durante el
transcurso de descargas eléctricas en la atmósfera.
47
Varning! Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller
koppla loss kablar.
Operating Temperature Warning
WARNING: To prevent the access point from overheating, do not operate it
in an area that exceeds the maximum recommended ambient temperature
of 122°F (50°C). To prevent airflow restriction, allow at least 6 in. (15.2 cm)
of clearance around the ventilation openings.
Waarschuwing Om te voorkomen dat welke access point van de Juniper
Networks access point dan ook oververhit raakt, dient u deze niet te bedienen
op een plaats waar de maximale aanbevolen omgevingstemperatuur van
50°C wordt overschreden. Om te voorkomen dat de luchtstroom wordt
beperkt, dient er minstens 15,2 cm speling rond de ventilatie-openingen te
zijn.
Varoitus Ettei Juniper Networks access point-sarjan reititin ylikuumentuisi,
sitä ei saa käyttää tilassa, jonka lämpötila ylittää korkeimman suositellun
ympäristölämpötilan 50°C. Ettei ilmanvaihto estyisi, tuuletusaukkojen
ympärille on jätettävä ainakin 15,2 cm tilaa.
Attention Pour éviter toute surchauffe des routeurs de la gamme Juniper
Networks access point, ne l'utilisez pas dans une zone où la température
ambiante est supérieure à 50°C. Pour permettre un flot d'air constant,
dégagez un espace d'au moins 15,2 cm autour des ouvertures de ventilations.
Warnung Um einen access point der access point vor Überhitzung zu schützen,
darf dieser nicht in einer Gegend betrieben werden, in der die
Umgebungstemperatur das empfohlene Maximum von 50°C überschreitet.
Um Lüftungsverschluß zu verhindern, achten Sie darauf, daß mindestens 15,2
cm lichter Raum um die Lüftungsöffnungen herum frei bleibt.
Avvertenza Per evitare il surriscaldamento dei access point, non adoperateli
in un locale che ecceda la temperatura ambientale massima di 50°C. Per
evitare che la circolazione dell'aria sia impedita, lasciate uno spazio di almeno
15.2 cm di fronte alle aperture delle ventole.
Advarsel Unngå overoppheting av eventuelle rutere i Juniper Networks access
point Disse skal ikke brukes på steder der den anbefalte maksimale
omgivelsestemperaturen overstiger 50°C (122°F). Sørg for at klaringen rundt
lufteåpningene er minst 15,2 cm (6 tommer) for å forhindre nedsatt
luftsirkulasjon.
Aviso Para evitar o sobreaquecimento do encaminhador Juniper Networks
access point, não utilize este equipamento numa área que exceda a
temperatura máxima recomendada de 50°C. Para evitar a restrição à
48
circulação de ar, deixe pelo menos um espaço de 15,2 cm à volta das aberturas
de ventilação.
¡Atención! Para impedir que un encaminador de la serie Juniper Networks
access point se recaliente, no lo haga funcionar en un área en la que se supere
la temperatura ambiente máxima recomendada de 50°C. Para impedir la
restricción de la entrada de aire, deje un espacio mínimo de 15,2 cm alrededor
de las aperturas para ventilación.
Varning! Förhindra att en Juniper Networks access point överhettas genom
att inte använda den i ett område där den maximalt rekommenderade
omgivningstemperaturen på 50°C överskrids. Förhindra att luftcirkulationen
inskränks genom att se till att det finns fritt utrymme på minst 15,2 cm omkring
ventilationsöppningarna.
Product Disposal Warning
WARNING: Disposal of this product must be handled according to all national
laws and regulations.
Waarschuwing Dit produkt dient volgens alle landelijke wetten en
voorschriften te worden afgedankt.
Varoitus Tämän tuotteen lopullisesta hävittämisestä tulee huolehtia kaikkia
valtakunnallisia lakeja ja säännöksiä noudattaen.
Attention La mise au rebut définitive de ce produit doit être effectuée
conformément à toutes les lois et réglementations en vigueur.
Warnung Dieses Produkt muß den geltenden Gesetzen und Vorschriften
entsprechend entsorgt werden.
Avvertenza L'eliminazione finale di questo prodotto deve essere eseguita
osservando le normative italiane vigenti in materia
Advarsel Endelig disponering av dette produktet må skje i henhold til nasjonale
lover og forskrifter.
Aviso A descartagem final deste produto deverá ser efectuada de acordo
com os regulamentos e a legislação nacional.
¡Atención! El desecho final de este producto debe realizarse según todas las
leyes y regulaciones nacionales
Varning! Slutlig kassering av denna produkt bör skötas i enlighet med landets
alla lagar och föreskrifter.
Related
Documentation
•
49
•
•
•
•
•
AX411 Access Point Electrical Safety Guidelines and Warnings
•
In Case of Electrical Accident on page 50
•
General Electrical Safety Guidelines and Warnings on page 50
In Case of Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
1.
2. Disconnect power from the access point.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
General Electrical Safety Guidelines and Warnings
•
50
Install the access point in compliance with the following local, national, or international
electrical codes:
•
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code
•
Canada—Canadian Electrical Code, Part 1, CSA C22.1
•
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7
•
Evaluated to the TN power system
•
Locate the emergency power-off switch for the room in which you are working so that
if an electrical accident occurs, you can quickly turn off the power.
•
Do not work alone if potentially hazardous conditions exist anywhere in your workspace.
•
Never assume that power is disconnected from a circuit. Always check the circuit before
starting to work.
•
Carefully look for possible hazards in your work area, such as moist floors, ungrounded
power extension cords, and missing safety grounds.
Related
Documentation
•
Operate the access point within marked electrical ratings and product usage
instructions.
•
For the access point and peripheral equipment to function safely and correctly, use
the cables and connectors specified for the attached peripheral equipment, and make
certain they are in good condition.
•
•
•
•
•
page 45
•
AX411 Access Point Agency Approvals
The access point complies with the following standards:
•
•
Safety:
•
CSA 60950-1 (2003) Safety of Information Technology Equipment
•
UL 60950-1 (2003) Safety of Information Technology Equipment
•
EN 60950-1 (2001) Safety of Information Technology Equipment
•
IEC 60950-1 (2001) Safety of Information Technology Equipment (with country
deviations)
EMC:
•
•
EN 300 386 V1.3.3 (2005) Telecom Network Equipment - EMC requirements
EMI:
•
FCC Part 15 Class B (2007) USA Radiated Emissions
•
EN 55022 Class B (2006) European Radiated Emissions
•
VCCI Class B (2007) Japanese Radiated Emissions
51
•
Related
Documentation
Immunity:
•
EN 55024 +A1+A2 (1998) Information Technology Equipment Immunity
Characteristics
•
EN-61000-3-2 (2006) Power Line Harmonics
•
EN-61000-3-3 +A1 +A2 +A3 (1995) Power Line Voltage Fluctuations
•
EN-61000-4-2 +A1 +A2 (1995) Electrostatic Discharge
•
EN-61000-4-3 +A1+A2 (2002) Radiated Immunity
•
EN-61000-4-4 (2004) Electrical Fast Transients
•
EN-61000-4-5 (2006) Surge
•
EN-61000-4-6 (2007) Immunity to Conducted Disturbances
•
EN-61000-4-11 (2004) Voltage Dips and Sags
•
•
•
AX411 Access Point Compliance Statements for Environmental Requirements on
page 53
•
AX411 Access Point Compliance Statements for EMC Requirements
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Community
This is a Class B product.
Japan
The preceding translates as follows:
This is a Class B product based on the standard of the Voluntary Control Council for
Interference by Information Technology Equipment (VCCI). If this product is used near
52
a radio or television receiver in a domestic environment, it may cause radio interference.
Install and use the equipment according to the instruction manual.
United States
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Related
Documentation
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
•
•
page 53
•
AX411 Access Point Compliance Statements for Environmental Requirements
This topic includes the compliance statement for the following environmental
requirement:
Lithium Battery
Batteries in this product are not based on mercury, lead, or cadmium substances. The
batteries used in this product are in compliance with EU Directives 91/157/EEC, 93/86/EEC,
and 98/101/EEC. The product documentation includes instructional information about
the proper method of reclamation and recycling.
Related
Documentation
•
•
•
53
AX411 Access Point Compliance Statements for Acoustic Noise
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel
beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.
Translation:
The maximum emitted sound pressure level is 70 dB(A) or less per EN ISO 7779.
Related
Documentation
•
•
•
page 53
AX411 Access Point WiFi Interoperability
The AX411 Access Point holds the WiFi Alliance interoperability certifications described
in this section.
Wi-Fi interoperability certification ID number: WFA7729
IEEE standards:
•
IEEE 802.11a
•
IEEE 802.11b
•
IEEE 802.11g
•
IEEE 802.11n draft 2.0
•
IEEE 802.11d
•
IEEE 802.11h
Security:
•
WPA - Enterprise, Personal
•
WPA2 - Enterprise, Personal
EAP types:
54
•
EAP-TLS
•
EAP-TTLS/MSCHAPv2
•
PEAPv0/EAP-MSCHAPv2
•
PEAPv1/EAP-GTC
•
EAP-SIM
Multimedia:
Related
Documentation
•
WMM
•
•
•
page 53
•
55
56
CHAPTER 5
Power Guidelines, Requirements, and
Specifications
•
AX411 Access Point Site Electrical Wiring Guidelines on page 57
•
AX411 Access Point Power Supply Specifications and Requirements on page 58
AX411 Access Point Site Electrical Wiring Guidelines
Table 17 on page 57 describes the factors you must consider while planning the electrical
wiring for the AX411 Access Point at your site.
CAUTION: It is particularly important to provide a properly grounded and
shielded environment and to use electrical surge-suppression devices.
Table 17: Site Electrical Wiring Guidelines for the AX411 Access Point
Site Wiring Factor
Guideline
Signaling limitations
To ensure that signaling functions optimally:
•
Install wires correctly.
Improperly installed wires can emit radio interference.
•
Do not exceed the recommended distances or pass wires
between buildings.
The potential for damage from lightning strikes increases if wires
exceed recommended distances or if wires pass between
buildings.
•
Shield all conductors.
The electromagnetic pulse (EMP) caused by lightning can
damage unshielded conductors and destroy electronic devices.
Radio frequency
interference (RFI)
To reduce or eliminate the emission of RFI from your site wiring:
•
Use twisted-pair cable with a good distribution of grounding
conductors.
•
Use a high-quality twisted-pair cable with one ground conductor
for each data signal when applicable, if you must exceed the
recommended distances.
57
Table 17: Site Electrical Wiring Guidelines for the AX411 Access
Point (continued)
Site Wiring Factor
Guideline
Electromagnetic
Compatibility (EMC)
Provide a properly grounded and shielded environment and use
electrical surge-suppression devices.
Strong sources of electromagnetic interference (EMI) can cause
the following damage:
•
Destroy the signal drivers and receivers in the device
•
Conduct power surges over the lines into the equipment,
resulting in an electrical hazard
NOTE: If your site is susceptible to problems with EMC, particularly
from lightning or radio transmitters, you may want to seek expert
advice.
CAUTION: To comply with intrabuilding lightning/surge requirements, the
intrabuilding wiring must be shielded. The shielding for the wiring must be
grounded at both ends.
Related
Documentation
•
AX411 Access Point Power Supply Specifications and Requirements on page 58
AX411 Access Point Power Supply Specifications and Requirements
The AC power system electrical specifications for the AX411 Access Point are listed in
Table 18 on page 58.
Table 18: Power Supply Electrical Specifications for the AX411 Access
Point
Power Requirement
Specification
AC input voltage
100 to 240 VAC
AC input line frequency
50 to 60 Hz
AC system current rating
0.65 A max
WARNING: The AC power cord for the access point is intended for use with
the device only and not for any other use.
Related
Documentation
58
•
AX411 Access Point Site Electrical Wiring Guidelines on page 57
CHAPTER 6
Interface Cable Specifications and
Connector Pinouts
•
Interface Cable and Wire Specifications for the AX411 Access Point on page 59
•
RJ-45 Connector Pinouts for the AX411 Access Point Ethernet Port on page 59
•
RJ-45 Connector Pinouts for the AX411 Access Point Console Port on page 60
Interface Cable and Wire Specifications for the AX411 Access Point
Table 19 on page 59 lists the specifications for the cables that connect to ports on the
AX411 Access Point.
Table 19: Cable and Wire Specifications for Ports and on the AX411 Access
Point
Related
Documentation
Port
Cable Specification
Maximum Length
Device
Receptacle
Console port
RS-232 (EIA-232) serial cable
6 ft (1.83 m)
RJ-45
Ethernet port
Category 5e or Category 6 cable or
equivalent suitable for 1000Base-T
and PoE operation
328 ft (100 m)
RJ-45
•
•
RJ-45 Connector Pinouts for the AX411 Access Point Ethernet Port
The Ethernet port on the front panel is an autosensing 10/100/1000-Mbps Ethernet
RJ-45 receptacle that accepts an Ethernet cable for connecting the access point to the
SRX Series device that manages it.
Figure 11 on page 60 shows the RJ-45 cable connector.
59
Figure 11: Ethernet Cable Connector (RJ-45)
Table 20 on page 60 describes the RJ-45 connector pinouts for the ETHERNET port.
Table 20: RJ-45 Connector Pinouts for the Access Point Ethernet Port
Related
Documentation
Pin
Signal
1
TX+
2
TX -
3
RX+
4
PoE V+
5
PoE V+
6
RX —
7
PoE V-
8
PoE V-
•
•
RJ-45 Connector Pinouts for the AX411 Access Point Console Port
The console port on the front panel is an RJ-45 receptacle that accepts an RJ-45 cable
for connecting the AX411 Access Point to the serial port on a laptop or desktop
management workstation for diagnostics or troubleshooting.
Figure 12 on page 60 shows the RJ-45 connector for the console port.
Figure 12: Console Cable Connector
Table 21 on page 61 describes the RJ-45 connector pinouts for the CONSOLE port.
60
Chapter 6: Interface Cable Specifications and Connector Pinouts
Table 21: RJ-45 Connector Pinouts for Access Point Console Port
Related
Documentation
Pin
Signal
Description
1
RTS
Request to Send
2
DTR
Data Terminal Ready
3
TXD
Transmit Data
4
Ground
Signal Ground
5
Ground
Signal Ground
6
RXD
Receive Data
7
DSR/DCD
Data Set Ready
8
CTS
Clear to Send
•
•
61
62
PART 3
Installation
•
Installation Overview on page 65
•
Unpacking the Access Point on page 67
•
Installing the Access Point on page 69
•
Connecting and Powering On the Access Point on page 77
63
64
CHAPTER 7
Installation Overview
•
•
Tools and Parts Required to Install the AX411 Access Point
You must have the following tools and parts to install the AX411 Access Point:
Related
Documentation
•
CAT5e or CAT6 Ethernet Cable of appropriate length
•
Mounting bracket for wall-mounting or overhead-mounting the access point
•
Overhead enclosure for overhead-mounting the access point
•
Screws or wall anchors for wall-mounting the access point
•
Screwdriver or wrench appropriate for the wall-mounting screws or anchors
•
•
•
AX411 Access Point Setup Overview
After you have prepared your installation site, you are ready to unpack and install the
AX411 Access Point. It is important to proceed through the installation process as described
in Table 22 on page 66.
When you install the access point as described in Table 22 on page 66, the services
gateway loads a default configuration onto the access point, which establishes basic
WLAN parameters.
After you have set up the access point and established basic WLAN connectivity, see the
Junos OS WLAN Configuration and Administration Guide and Junos OS CLI Reference for
information on performing advanced WLAN configuration.
65
Table 22: Installation Process Order for the AX411 Access Point
Step
Task
1
Review the safety guidelines.
“AX411 Access Point General Safety Guidelines and Warnings”
on page 39
2
Verify that you have prepared your site for the
installation of the access point using the checklist.
“Site Preparation Checklist for the AX411 Access Point” on
page 33
3
Unpack the access point and verify that all parts
are present.
“Unpacking the AX411 Access Point” on page 67
“Verifying Parts Received with the AX411 Access Point” on
page 67
4
Install the access point.
“Installing the AX411 Access Point on a Flat Surface” on page 69
“Installing the AX411 Access Point on a Wall” on page 69
“Installing the AX411 Access Point in an Overhead Enclosure”
on page 71
5
Connect the access point to the SRX Series device
and to power.
Installing the AX411 Access Point Antennas
“Connecting the AX411 Access Point to the SRX Series Device”
on page 79
“Providing Power to the AX411 Access Point Using Power over
Ethernet” on page 80
“Providing Power to the AX411 Access Point Using the Power
Supply” on page 80
6
Configure the wireless LAN.
“AX411 Access Point Wireless LAN Initial Software Configuration
Overview” on page 85“Installing Licenses for the AX411 Access
Point on the SRX Series Device” on page 87“Configuring AX411
Access Point Country-Specific Settings” on page 88
7
Test connectivity to the wireless LAN.
“Testing Connectivity to the AX411 Access Point Wireless LAN”
on page 92
Related
Documentation
66
•
•
•
CHAPTER 8
Unpacking the Access Point
•
Unpacking the AX411 Access Point on page 67
•
Verifying Parts Received with the AX411 Access Point on page 67
Unpacking the AX411 Access Point
The AX411 Access Point is shipped in a cardboard carton.
NOTE: The device is maximally protected inside the shipping carton. Do not
unpack it until you are ready to begin installation.
To unpack the access point:
1.
Open the box in which the device is shipped.
2. Verify the parts received against the lists in “Verifying Parts Received with the AX411
Access Point” on page 67.
3. Store the shipping box and packing material in case you need to return or move the
device at a later time.
Related
Documentation
•
Verifying Parts Received with the AX411 Access Point on page 67
Verifying Parts Received with the AX411 Access Point
The AX411 Access Point shipping carton contains a packing list that includes all parts
and accessories available with the device. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
The shipping carton contains the chassis and parts listed in Table 23 on page 68.
67
Table 23: Parts List for the AX411 Access Point
Related
Documentation
68
•
Component
Quantity
Access point
1
Antennas
3
Juniper Networks Product Warranty
1
End User License Agreement
1
AX411 Access Point Getting Started Guide
1
Security Products Safety Guide
1
Juniper Compliance Form Letter
1
Product Registration
1
Unpacking the AX411 Access Point on page 67
CHAPTER 9
Installing the Access Point
•
Installing the AX411 Access Point on a Flat Surface on page 69
•
Installing the AX411 Access Point on a Wall on page 69
•
Installing the AX411 Access Point in an Overhead Enclosure on page 71
•
Removing the AX411 Access Point Plastic Cover on page 74
Installing the AX411 Access Point on a Flat Surface
You can install the AX411 Access Point on a desk, on a table, or on another level surface.
The device is shipped with rubber feet attached. The rubber feet are necessary to stabilize
the device on the surface.
To install the device on a level surface:
1.
Make sure that the rubber feet are attached to the bottom of the chassis.
2. Place the device on the surface with the Juniper Networks logo facing up.
Related
Documentation
•
Installing the AX411 Access Point on a Wall
To install the AX411 Access Point on a wall, perform the following procedures:
1.
Installing the AX411 Access Point Mounting Bracket on a Wall on page 69
2. Attaching the AX411 Access Point to a Mounting Bracket Installed on a Wall on page 70
Installing the AX411 Access Point Mounting Bracket on a Wall
To install the access point mounting bracket on a wall:
1.
Obtain the optional mounting bracket from your Juniper Networks reseller. The
mounting bracket is not supplied with the access point.
2. Locate the place on the wall where you intended to mount the access point.
3. Use the mounting bracket as a template to mark the locations for two screws that
secure the mounting bracket to the wall. If practical, use screw holes on opposite
sides or edges of the mounting bracket.
69
4. If necessary, install anchors for the screws to distribute the weight of the access point
into the wall.
5. Attach the mounting bracket to the wall using screws appropriate to the wall and
anchoring system.
g033106
Figure 13: Attaching the Mounting Bracket to a Wall
Attaching the AX411 Access Point to a Mounting Bracket Installed on a Wall
To attach the AX411 Access Point to its mounting bracket:
1.
If you are installing the AX411 Access Point on a wall above a suspended ceiling, first
remove the plastic cover from the access point as described in “Removing the AX411
Access Point Plastic Cover” on page 74.
2. Locate the two pins protruding from the underside of the access point.
3. Orient the access point so that the captive screw on the rear panel matches the tab
on the mounting bracket.
4. Press the access point against the mounting bracket so that the two pins go through
the enlarged portions of the keyhole slots on the raised ears at each edge of the
mounting bracket.
5. Slide the access point so that the pins engage the narrower portions of the keyhole
slots in the mounting bracket.
6. Secure the access point to the mounting bracket by tightening the captive screw on
the rear panel of the access point.
70
Chapter 9: Installing the Access Point
Figure 14: Attaching the Access Point to the Mounting Bracket
Engage pins in slots
g033105
Tighten captive screw
(opposite side)
Installing the AX411 Access Point in an Overhead Enclosure
This procedure describes how to install the AX411 Access Point in a typical overhead
enclosure, in this case the Oberon Wireless model 1052-00 enclosure with 34–ZDUAL
antennas. For installation in other overhead enclosures, see the specific instructions
provided with the enclosure.
To install the access point in an overhead enclosure, perform the following procedures:
1.
Installing the AX411 Access Point Mounting Bracket in an Overhead
Enclosure on page 72
2. Attaching the AX411 Access Point to a Mounting Bracket in an Overhead
Enclosure on page 72
3. Connecting External Antennas to the AX411 Access Point on page 73
4. Installing the Overhead Enclosure Containing the AX411 Access Point on page 74
71
Installing the AX411 Access Point Mounting Bracket in an Overhead Enclosure
Use the hardware provided with the overhead enclosure to install the mounting bracket
inside the enclosure. Attach the bracket inside the enclosure with at least two screws of
size 8-32 or M4 or larger. For specific procedures, see the instructions provided with the
enclosure.
g033108
Figure 15: Installing the Mounting Bracket in an Overhead Enclosure
Attaching the AX411 Access Point to a Mounting Bracket in an Overhead Enclosure
To attach the AX411 Access Point to a mounting bracket installed inside an overhead
enclosure:
1.
Locate the two pins protruding from the underside of the access point.
2. Orient the access point so that the captive screw on the rear panel matches the tab
on the mounting bracket.
3. Press the access point against the mounting bracket so that the two pins go through
the enlarged portions of the keyhole slots on the raised ears at each edge of the
mounting bracket.
72
4. Slide the access point so that the pins engage the narrower portions of the keyhole
slots in the mounting bracket.
5. Secure the access point to the mounting bracket by tightening the captive screw on
the rear panel of the access point.
Figure 16: Attaching the Access Point to the Mounting Bracket
Engage pins in slots
g033105
Tighten captive screw
(opposite side)
Connecting External Antennas to the AX411 Access Point
For overhead enclosures with external antennas, use this procedure to connect the
external antennas:
1.
If necessary, install the antennas in the enclosure. Refer to the instructions provided
with the antennas and the enclosure.
2. Connect one antenna cable to each antenna connector on the back of the AX411
Access Point and tighten it finger tight. The order and arrangement of the antenna
connections do not matter.
3. Arrange the antenna cables within the enclosure so that they do not interfere with
the opening or closing of the enclosure door. If necessary, use cable ties to bundle the
antenna cables neatly.
73
Installing the Overhead Enclosure Containing the AX411 Access Point
See the instructions provided with the overhead enclosure to install the enclosure at your
site.
Removing the AX411 Access Point Plastic Cover
The decorative plastic cover of the AX411 Access Point does not meet flammability
requirements for installations in environmental airspaces. The space above a suspended
ceiling may constitute an environmental airspace if it is used as a plenum for the building
ventilation system. You must remove the plastic cover whenever you install the access
point in an environmental airspace. You can remove the plastic cover without affecting
the operation or performance of the access point.
To remove the plastic cover:
1.
Turn the access point over so that the underside of the device faces upward.
2. Locate the retaining latches at each corner that latch the plastic cover onto the metal
chassis. The latches are shown in Figure 17 on page 74.
Figure 17: Releasing the Plastic Cover
Release latches at
remaining edge and lift
metal chassis out of
plastic cover
g033119
Release latches at one
edge of chassis and lift
metal chassis edge slightly
3. On one edge of the access point, press both tabs away from the metal chassis while
simultaneously lifting that edge of the chassis away from the plastic cover.
74
4. Repeat Step 3 for the remaining edge of the chassis.
5. Lift the metal chassis away from the plastic cover.
Related
Documentation
•
Installing the AX411 Access Point Mounting Bracket in an Overhead Enclosure on page 72
•
Attaching the AX411 Access Point to a Mounting Bracket in an Overhead Enclosure on
page 72
•
Installing the Overhead Enclosure Containing the AX411 Access Point on page 74
75
76
CHAPTER 10
Connecting and Powering On the Access
Point
•
AX411 Access Point Connection Overview on page 77
•
Connecting External Antennas to the AX411 Access Point on page 79
•
Connecting the AX411 Access Point to the SRX Series Device on page 79
•
Providing Power to the AX411 Access Point Using Power over Ethernet on page 80
•
Providing Power to the AX411 Access Point Using the Power Supply on page 80
•
Powering On and Powering Off the AX411 Access point on page 81
AX411 Access Point Connection Overview
To establish a wireless LAN using AX411 Access Points, you connect the access point to
the SRX Series device and to a power source, as shown in Figure 18 on page 78.
77
Figure 18: AX411 Access Point Basic Connections
g033103
Omit power supply if
connecting access point
to Power over Ethernet
(PoE) port.
Table 24 on page 78 describes the connections.
Table 24: AX411 Access Point Basic Connections
Connection
Access point antennas
“Connecting External Antennas to the AX411 Access Point”
on page 73
Ethernet connection to SRX
Series device
“Connecting the AX411 Access Point to the SRX Series
Device” on page 79
Connection to a power source
“Providing Power to the AX411 Access Point Using Power
over Ethernet” on page 80
“Providing Power to the AX411 Access Point Using the Power
Supply” on page 80
“Powering On and Powering Off the AX411 Access point” on
page 81
Related
Documentation
78
•
•
Chapter 10: Connecting and Powering On the Access Point
•
•
Connecting External Antennas to the AX411 Access Point
For overhead enclosures with external antennas, use this procedure to connect the
external antennas:
1.
If necessary, install the antennas in the enclosure. Refer to the instructions provided
with the antennas and the enclosure.
2. Connect one antenna cable to each antenna connector on the back of the AX411
Access Point and tighten it finger tight. The order and arrangement of the antenna
connections do not matter.
3. Arrange the antenna cables within the enclosure so that they do not interfere with
the opening or closing of the enclosure door. If necessary, use cable ties to bundle the
antenna cables neatly.
Related
Documentation
•
Installing the AX411 Access Point Mounting Bracket in an Overhead Enclosure on page 72
•
Attaching the AX411 Access Point to a Mounting Bracket in an Overhead Enclosure on
page 72
•
Installing the Overhead Enclosure Containing the AX411 Access Point on page 74
Connecting the AX411 Access Point to the SRX Series Device
To connect the AX411 Access Point to the SRX Series device:
1.
Locate the port on the SRX Series device to which you are connecting the access
point. We recommend that you use a port other than ge-0/0/0 unless you are using
an advanced configuration. If you are providing power to the access point using Power
over Ethernet (PoE), make sure that the port supports PoE.
2. Connect one end of a CAT5e or CAT6 Ethernet cable to the intended port on the SRX
Series device.
3. Connect the other end of the cable to the Ethernet port on the access point.
Related
Documentation
•
•
•
•
79
Providing Power to the AX411 Access Point Using Power over Ethernet
The preferred method of supplying power to the AX411 Access Point is with Power over
Ethernet (PoE). This technology allows the transmission of electrical power to remote
devices over the same cables that the Ethernet traffic uses.
To connect the access point to a PoE power source:
1.
Locate a PoE-capable port on the device to which you are connecting the access
point. If you are connecting the access point directly to the SRX Series Services
Gateway, ensure that the services gateway has PoE capability. See the hardware
guide for your SRX Series Services Gateway for information about PoE.
2. If necessary, enable PoE on the interface to which you are connecting the access point.
For an SRX Series Services Gateway, the Junos OS command-line interface (CLI)
command for enabling PoE on a port is:
set poe interface interface-name maximum-power 12.4
To enable PoE on all PoE-capable ports:
set poe interface all maximum-power 12.4
3. Connect the access point to the PoE port using a standard CAT5e or CAT6 Ethernet
cable.
4. After connecting the access point to the PoE port, check the Power LED on the top of
the access point to make sure the device is receiving power.
Related
Documentation
•
•
•
•
•
Providing Power to the AX411 Access Point Using the Power Supply
If you do not use Power over Ethernet (PoE) to provide power to the AX411 Access Point,
you must use the power supply.
To connect the access point to the power supply:
1.
Obtain the power supply from your Juniper Networks reseller. The power supply is not
provided with the access point.
2. Connect the DC power cable on the power supply to the access point.
3. Connect the AC power cord to the socket on the power supply.
80
Chapter 10: Connecting and Powering On the Access Point
4. Plug the AC power cord into an AC power outlet at your site.
5. Check the Power LED on the top of the access point to make sure the device is receiving
power.
Related
Documentation
•
•
•
•
•
Powering On and Powering Off the AX411 Access point
The access point does not have a dedicated power switch. The access point is powered
on whenever either of the following two conditions is met:
•
The access point is receiving power from an Ethernet connection configured for Power
over Ethernet (PoE)
•
The access point is connected to the optional power supply
To power on the access point:
1.
Do one of the following:
•
Connect the access point Ethernet port to an Ethernet connection configured for
PoE.
•
Connect the Power connector on the front panel of the access point to the optional
power supply.
2. Check that the Power LED on the top of the access point lights steadily green.
To power off the access point:
1.
Do one of the following:
•
If the access point is powered by PoE, disconnect the Ethernet cable connected to
the access point Ethernet port.
•
If the access point is powered by the optional power supply, disconnect the power
supply from the Power connector on the access point front panel.
2. Check that the Power LED on the top of the access point is unlit.
Related
Documentation
•
•
•
81
82
PART 4
Configuring
•
Configuration Overview on page 85
•
Configuring the AX411 Access Point Wireless LAN on page 87
83
84
CHAPTER 11
Configuration Overview
•
AX411 Access Point Wireless LAN Initial Software Configuration Overview on page 85
AX411 Access Point Wireless LAN Initial Software Configuration Overview
The procedures in this topic describe how to establish communication between the AX411
Access Point and the SRX Series Services Gateway that manages it. When this
communication is established, the Status LED on the access point lights green, showing
that the access point is being managed by the services gateway. Then the services
gateway loads a default configuration onto the access point that establishes a basic
wireless LAN.
Once you have established communication between the access point and the services
gateway, you can perform advanced software configuration of the access point as
described in the Junos OS WLAN Configuration and Administration Guide.
If one or more access points are connected to the built-in Ethernet ports on the services
gateway other than ge-0/0/0, and the ports are in their factory default configuration,
each access point will automatically obtain an IP address using DHCP, and the services
gateway will deliver a default configuration to the access point. The Status LED on the
access point will light green, showing that the access point is being managed by the
services gateway. By default, the services gateway will accommodate up to two access
points. You can connect and use more than two access points if you also install access
point licenses on the services gateway.
For services gateways in the SRX200 line, the factory default settings establish a VLAN
consisting of all of the built-in ports except 0/0 (interface ge-0/0/0). These ports all
have a family setting of “ethernet-switching.” The VLAN has a logical interface that has
an IP address and belongs to the Trust zone. DHCP is enabled for the VLAN. Access points
connected to these ports operate in Layer 2 management mode by default.
For the SRX650 Services Gateway, the factory default settings establish a logical interface
for each of the four built-in Ethernet ports except ge-0/0/0. Each logical interface has
an IP address and belongs to the Trust zone. DHCP is enabled on each port. Access points
connected to these ports operate in Layer 3 management mode by default.
For more information about access point Layer 2 and Layer 3 management modes, see
the Junos OS WLAN Configuration and Administration Guide.
85
The easiest way to check whether the services gateway is properly configured to
communicate with the access point is to perform the sequence of tasks described in
Table 25 on page 86. If at the end of this sequence the Status LED on the access point
is steady green and you can detect the juniper-default wireless network with a laptop or
other Wi-Fi device, the services gateway is properly configured.
Table 25: AX411 Access Point Wireless LAN Basic Software Configuration
Task
Install access point licenses on the SRX Series
Services Gateway (only required for more than
two access points).
“Installing Licenses for the AX411 Access Point
on the SRX Series Device” on page 87
Check that the access point is connected to
the services gateway.
“Connecting the AX411 Access Point to the SRX
Series Device” on page 79
Check that the access point is powered on.
“Powering On and Powering Off the AX411 Access
point” on page 81
Configure country-specific settings (only
required for ETSI and Worldwide region access
points with SKUs AX411–E and AX411–W).
“Configuring AX411 Access Point Country-Specific
Settings” on page 88
“AX411 Access Point Country and Channel
Support” on page 11
Test connectivity to the AX411 Access Point
wireless LAN.
“Testing Connectivity to the AX411 Access Point
Wireless LAN” on page 92
The most important aspect of the services gateway configuration is that the access point
must be able to obtain an IP address from the services gateway using DHCP. The access
point must obtain an IP address using DHCP in order for the services gateway to manage
the access point, even if the access point is configured to use a static IP address. The
factory default configuration for services gateways in the SRX200 line enables DHCP
for the logical interface of the VLAN to which all of the built-in ports except 0/0 (interface
ge-0/0/0) belong. The factory default configuration for SRX650 Services Gateways
enables DHCP on the logical interface for each of the built-in ports except 0/0.
If the ports of your services gateway are not in their factory default configurations, see
“AX411 Access Point Configuration Example: Layer 2 Mode (CLI)” on page 93 and “AX411
Access Point Configuration Example: Layer 3 Mode (CLI)” on page 94 for examples of
how you can configure the services gateway ports for access points in Layer 2 or Layer
3 operation.
Related
Documentation
86
•
Installing Licenses for the AX411 Access Point on the SRX Series Device on page 87
•
•
Configuring AX411 Access Point Country-Specific Settings on page 88
•
Testing Connectivity to the AX411 Access Point Wireless LAN on page 92
•
AX411 Access Point Configuration Example: Layer 2 Mode (CLI) on page 93
•
CHAPTER 12
Configuring the AX411 Access Point
Wireless LAN
•
•
Configuring AX411 Access Point Country-Specific Settings on page 88
•
•
•
•
Returning the AX411 Access Point to the Factory Default Settings on page 95
Installing Licenses for the AX411 Access Point on the SRX Series Device
You can connect and use up to two AX411 Access Points on the services gateway without
obtaining an access point license. To connect more than two access points, you must
obtain an access point license and install it on the services gateway. You obtain access
point licenses from your Juniper Networks representative or reseller.
Licenses are available for two access points. The licenses are cumulative; for example,
if you have a services gateway that comes with support for two access points and you
install a two-access-point license (SKU AX411-2), you can configure and manage up to
four access points.
Licenses are delivered in the form of a text file containing a block of alphanumeric data,
as shown in the following example:
li29183743 4ky27y acasck 82fsj6 jzsn4q ix8i8d adj7kr
8uq38t ix8i8d jzsn4q ix8i8d 4ky27y acasck
82fsj6 ii8i7e adj7kr 8uq38t ks2923 a9382e
The following two procedures describe how to install an access point license key using
the CLI and the J-Web interface. For more information about managing licenses, see the
Junos OS Administration Guide.
With the
Command-Line
Interface
1.
Open the file containing the license in a text editor and copy the text of the license
onto the clipboard.
2. If you have not already done so, establish a console connection with the SRX Series
Services Gateway as described in the hardware guide for the services gateway, and
log into the CLI.
87
3. At the CLI prompt, enter:
admin@srx650–tp# request system license add terminal
4. When prompted, type or paste the license text.
5. Press Ctrl+D.
6. Commit your changes:
admin@srx650–tp# commit
commit complete
With the J-Web
Interface
1.
Start the J-Web interface by browsing to the IP address of the management interface
on the services gateway.
2. Choose Maintain > Licenses to navigate to the License page.
3. In the Installed Licenses area, click Add to open the Add Licenses window.
4. In the License Key Text box, type or paste the license text.
5. Click OK.
Related
Documentation
•
•
Configuring AX411 Access Point Country-Specific Settings
Under most circumstances, you do not need to set any country-specific settings in order
to install, configure, and use the access point. However, the following two access point
versions are supplied with the country code set to a null value:
•
ETSI (SKU AX411-E)
•
Worldwide (SKU AX411-W)
For these units, you must set the country code and two other country-specific settings
before you can use the access point.
To configure the country code and the two other country-specific settings, perform one
of the following procedures before testing connectivity to the access point:
88
Chapter 12: Configuring the AX411 Access Point Wireless LAN
With the
Command-Line
Interface
1.
Find your country in the country and channel support table in “AX411 Access Point
Country and Channel Support” on page 11 and write down the following:
•
The two-letter country code in the first column
•
Whether the word “None” appears in either of the Radio 1 or Radio 2 columns (fourth
and fifth columns) under the “Channels Supported” header, and, if so, which column
in which it appears
•
Whether 40 MHz channel bandwidth is supported for the 2.4 GHz frequency band
(Radio 2), shown in the seventh column
•
Whether 40 MHz channel bandwidth is supported for the 5 GHz frequency band
(Radio 1), shown in the eighth column
2. If you have not already done so, establish a console connection with the SRX Series
Services Gateway as described in the hardware guide for the services gateway, and
log into the CLI.
3. Enter configuration mode:
admin@> edit
Entering configuration mode
4. Create an access point instance in the SRX Series device configuration:
admin@# set wlan access-point name mac-address mac_address
where name is the name you want to apply to the access point and mac_address is
the MAC address written on the serial number label on the bottom of the access point.
For example:
admin@# set wlan access-point silver mac-address 0012cfc75dc0
5. Set the country code for the access point instance:
admin@# set wlan access-point name access-point-options country country_code
where country_code is the two-letter country code for your location, entered in
uppercase letters.
For example:
admin@# set wlan access-point silver access-point-options country GB
6. If either 2.4 GHz or 5 GHz operation is not allowed in your country, as indicated by the
word “None” in either the fourth or fifth column of the table, use the following CLI
command to disable either the 2.4 GHz radio (Radio 2) or the 5 GHz radio (Radio 1)
as appropriate:
admin@# set wlan access-point name radio 1|2 radio-options radio-off
7. If 40 MHz channel bandwidth is not supported for the 2.4 GHz frequency band in your
country, as indicated by an “N” in the seventh column of the table, use the following
CLI command to set the 2.4 GHz channel bandwidth to 20 MHz. The default channel
bandwidth is 40 MHz, so if the column contains “Y” you can skip to the next step:
admin@# set wlan access-point name radio 2 radio-options channel bandwidth 20
89
8. If 40 MHz channel bandwidth is not supported for the 5 GHz frequency band in your
country, as indicated by an “N” in the eighth column of the table, use the following CLI
command to set the 5 GHz channel bandwidth to 20 MHz. The default channel
bandwidth is 40 MHz, so if the column contains “Y” you can skip to the next step:
admin@# set wlan access-point name radio 1 radio-options channel bandwidth 20
admin@#> commit
commit complete
With the J-Web
Interface
1.
Find your country in the country and channel support table in “AX411 Access Point
Country and Channel Support” on page 11 and write down the following:
•
Whether the word “None” appears in either of the Radio 1 or Radio 2 columns (fourth
and fifth columns) under the “Channels Supported” header, and, if so, which column
it appears in
•
Whether 40 MHz channel bandwidth is supported for the 2.4 GHz frequency band
(Radio 2), shown in the seventh column
•
Whether 40 MHz channel bandwidth is supported for the 5 GHz frequency band
(Radio 1), shown in the eighth column
2. If you have not already done so, start the J-Web interface by browsing to the IP address
or hostname of the SRX Series device.
3. In J-Web, choose Configure > Wireless LAN > Settings to open the Wlan Settings pane.
4. On the Wlan Settings pane, click the Add button above the access point list.
5. On the Add - Access Point dialog box:
a. In the Access point name box, type a name for the access point.
b. In the MAC address box, enter the MAC address printed on the serial number label
on the bottom of the access point.
c. In the Country menu, choose the country in which the access point is operating.
6. At the bottom of the Add - Access Point dialog box, click OK.
7. On the lower part of the Wlan Settings pane, click the Add button above the radio list.
The Add - Radio dialog box opens with the Radio tab at the front.
90
8. On the Add - Radio dialog box Radio tab:
a. From the Radio Type menu, choose Radio 1 (the 5 GHz radio).
b. If 5 GHz operation is not allowed in your country, as indicated by the word “None”
in the fifth column of the table, mark the Disabled radio button below the Radio
Type menu.
c. Click the Radio Settings tab to bring it to the front.
d. If 40 MHz channel bandwidth is not supported for the 5 GHz frequency band in
your country, as indicated by an “N” in the eighth column of the table, click the
Channel Bandwidth menu and choose 20 to set the 5 GHz channel bandwidth to
20 MHz. The default channel bandwidth is 40 MHz, so if the column contains “Y”
you can skip this step.
9. At the bottom of the Add - Radio dialog box, click OK.
10. On the lower part of the Wlan Settings pane, click the Add button above the radio list.
The Add - Radio dialog box opens with the Radio tab at the front.
11. On the Add - Radio dialog box Radio tab:
a. From the Radio Type menu, choose Radio 2 (the 2.4 GHz radio).
b. If 2.4 GHz operation is not allowed in your country, as indicated by the word “None”
in the fourth column of the table, mark the Disabled radio button below the Radio
Type menu.
c. Click the Radio Settings tab to bring it to the front.
d. If 40 MHz channel bandwidth is not supported for the 2.4 GHz frequency band in
your country, as indicated by an “N” in the seventh column of the table, click the
Channel Bandwidth menu and choose 20 to set the 2.4 GHz channel bandwidth
to 20 MHz. The default channel bandwidth is 40 MHz, so if the column contains
“Y” you can skip this step.
12. At the bottom of the Add - Radio dialog box, click OK.
13. At the top of the J-Web window, choose Commit Options > Commit.
Related
Documentation
•
•
•
91
Testing Connectivity to the AX411 Access Point Wireless LAN
After you have installed and connected the AX411 Access Point and configured the SRX
Series device with basic settings, test whether the wireless LAN is functioning.
1.
Confirm that the access point is connected to the services gateway. We recommend
that you connect the access point to an Ethernet port other than ge-0/0/0.
2. Confirm that the Power LED on the access point is lit steady green, showing that the
access point is powered on.
3. Confirm that the Status LED on the access point is lit steady green, showing that the
access point is being managed by the services gateway.
4. Use a laptop computer or other wireless device to view the available networks near
where the access point is installed. You should find a security-enabled network with
juniper-default as its SSID. The default wireless LAN settings are described in Table
26 on page 92.
5. Connect to the juniper-default network. When prompted for a WPA2-PSK security
key, enter juniper-wireless.
Table 26: AX411 Access Point Default Configuration Settings
Related
Documentation
92
Parameter
Value
SSID
juniper-default
SSID broadcast
Enabled
Security
WPA2–PSK
WPA2–PSK Security Key
juniper-wireless
Encapsulation
AES
•
•
•
AX411 Access Point Configuration Example: Layer 2 Mode (CLI)
The following example shows one way to use the Junos OS CLI to configure the services
gateway so that access points are in Layer 2 management mode similar to the factory
default configuration in the SRX200 line of services gateways. The example shown in
the procedure below is based on configuring Gigabit Ethernet ports on a GPIM installed
in slot 1 of an SRX650 Services Gateway, but you can adapt it for use in other situations.
For information about other configurations see the Junos OS WLAN Configuration and
Administration Guide and the Junos OS Interfaces and Routing Configuration Guide.
1.
Establish a CLI session with the services gateway and log in to the device.
configure
[edit]
admin@srx650–tp#
3. Create an interface range containing the access point ports:
admin@srx650–tp# set interfaces interface-range AP-interfaces member ge-1/0/0
4. Configure the interface range for family type “ethernet-switching” and make its
interfaces members of a VLAN:
admin@srx650–tp# set interfaces interface-range AP-interfaces unit 0 family
ethernet-switching vlan members vlan-trust
5. Configure a logical interface with an IP address for the VLAN:
admin@srx650–tp# set interfaces vlan unit 0 family inet address 192.168.1.5
6. Add the VLAN logical interface to the Trust security zone:
admin@srx650–tp# set security zones security-zone trust interfaces vlan.0
7. Configure a DHCP router entry for the VLAN IP address:
admin@srx650–tp# set system services dhcp router 192.168.1.5
8. Configure a DHCP pool with IP addresses for the access points and wireless clients:
admin@srx650–tp# set system services dhcp pool 192.168.1.0/24 address-range low
192.168.1.2 high 192.168.1.254
9. Configure the VLAN with an ID number and designate its Layer 3 interface as the
interface you created in Step 5:
admin@srx650–tp# set vlans vlan-trust vlan-id 3
admin@srx650–tp# set vlans vlan-trust l3-interface vlan.0
10. Configure a DHCP pool with IP addresses for the access points and wireless clients:
192.168.1.2 high 192.168.1.254
93
11. Enable HTTP and HTTPS Web management services on the VLAN interface:
admin@srx650–tp# set system services web-management http interface vlan.0
admin@srx650–tp# set system services web-management https interface vlan.0
commit complete
AX411 Access Point Configuration Example: Layer 3 Mode (CLI)
The following example shows one way to use the Junos OS CLI to configure the services
gateway so that access points are in Layer 3 management mode similar to the factory
default configuration of the built-in ports on the SRX650 Services Gateway. The example
shown in the procedure below is based on configuring Gigabit Ethernet ports 0 through
4 on a GPIM installed in slot 1 of an SRX650 Services Gateway, but you can adapt it for
use in other situations. For information about other configurations, see the Junos OS
WLAN Configuration and Administration Guideand the Junos OS Interfaces and Routing
Configuration Guide.
1.
Establish a CLI session with the services gateway and log in to the device.
configure
[edit]
admin@srx650–tp#
3. Create logical interfaces for the ports to which the access points are connected:
admin@srx650–tp# set interfaces ge–1/0/0 unit 0 family inet address 192.168.4.1/24
4. Configure DHCP gateway addresses for each of the ports:
192.168.4.2 high 192.168.4.254
192.168.5.2 high 192.168.5.254
192.168.6.2 high 192.168.6.254
192.168.7.2 high 192.168.7.254
192.168.8.2 high 192.168.8.254
5. Configure DHCP address pools for each of the ports:
admin@srx650–tp# set system services dhcp pool 192.168.4.0/24 router 192.168.4.1
94
6. Add each logical interface to a valid security zone:
admin@srx650–tp# set security zones security-zone trust interfaces ge–1/0/0.0
commit complete
Returning the AX411 Access Point to the Factory Default Settings
Normally, the AX411 Access Point returns itself to factory default settings every time it
restarts. The access point then obtains an IP address from the services gateway that
manages it and waits for the services gateway to deliver its configuration settings. If the
access point does not receive its IP address and configuration from the services gateway
and the Status LED does not light steadily green, you might find it necessary to manually
return the access point to the factory default settings.
To return the AX411 Access Point to factory default settings:
1.
Connect the access point’s console connector to your computer’s serial port using an
Ethernet cable and the DB9-to-RJ45 adapter used to configure SRX Series Services
Gateways.
2. Establish a console session with the access point using a program such as
HyperTerminal and the following settings:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
3. Restart the access point:
•
If the access point is powered by Power over Ethernet (PoE), disconnect and then
reconnect the Ethernet cable at the Ethernet port on the access point.
•
If the access point is powered by the optional power supply, disconnect and then
reconnect the power supply at the power connector on the access point.
The access point startup messages scroll up the HyperTerminal window.
4. Watch for the AP Startup main menu to appear in the HyperTerminal window:
AP Startup -- Main Menu
1 - Start AP Application
95
2 - Display Utility Menu
Select (1, 2):
5. Within five seconds, enter 2 to open the Utility menu. If the access point does not
detect a response within five seconds, it continues its start sequence. If you miss the
five-second window, go back to step 3 of this procedure.
The AP Startup menu opens:
AP Startup -- Utility Menu
1 - Reset to factory default configuration
2 - Continue to boot
6. At the AP Startup menu prompt, enter 1.
7. The access point resets itself to its factory default settings and continues its starting
sequence.
96
PART 5
Maintenance
•
Maintaining the Hardware on page 99
97
98
CHAPTER 13
Maintaining the Hardware
•
Routine Maintenance Procedures for the AX411 Access Point on page 99
Routine Maintenance Procedures for the AX411 Access Point
Purpose
Action
Related
Documentation
For optimum access point performance, perform preventive maintenance procedures
regularly.
•
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
•
Make sure that the power cable is arranged so it does not obstruct access to other
device components.
•
Make sure that airflow is unobstructed around the device and into the air intake vents.
•
Check the Status LEDs on the top of the device.
•
Monitoring the AX411 Access Point with the LEDs on page 103
•
Monitoring the AX411 Access Point with the Command-Line Interface on page 104
99
100
PART 6
Monitoring
•
Monitoring the Access Point on page 103
•
Troubleshooting the Access Point on page 107
•
Juniper Networks Technical Assistance Center on page 109
•
Returning the Access Point on page 111
101
102
CHAPTER 14
Monitoring the Access Point
•
•
Monitoring the AX411 Access Point with the LEDs
At regular intervals, check the AX411 Access Point LEDs to make sure that the access
point is functional and has not encountered an error condition.
Under normal operating circumstances, the access point LEDs will be in the condition
shown in Table 27 on page 103.
Table 27: Access Point LED Normal Indications
LED
Color
State
Description
Power
Green
On steadily
The access point is powered on and operating
normally.
Status
Green
On steadily
The access point is being managed by the SRX
Series Services Gateway.
Radio 1 (5
GHz radio)
Blue
Flashing
The 5 GHz radio is enabled and broadcasting.
This LED will be off if the 5 GHz radio is disabled,
for example, if the radio settings for the country
code do not allow the use of 5 GHz channels.
Radio 2 (2.4
GHz radio)
Green
Flashing
The 2.4 GHz radio is enabled and broadcasting.
This LED will be off if the 2.4GHz radio is disabled,
for example, if the radio settings for the country
code do not allow the use of 2.4 GHz channels.
Table 28 on page 103 describes the LED indications that occur while the access point is
starting up.
Table 28: Access Point LED Starting Indications
Power
Status
Radio1
Radio2
State
Red
Off
Blue
Blue
The access point has just started up.
103
Table 28: Access Point LED Starting Indications (continued)
Related
Documentation
Power
Status
Radio1
Radio2
State
Off
Off
Blue
Blue
The access point is loading Uboot.
Green
Off
Blue
Blue
The access has finished loading Uboot.
Green
Off
Off
Off
The access point has started and is
requesting an IP address with DHCP, but is
not yet being managed by SRX Series device
and has not received its configuration from
the SRX Series device.
Green
Green
Off
Off
The access point has received an IP address
is being managed by the SRX Series device
and has received its configuration from the
SRX Series device.
•
Troubleshooting the AX411 Access Point with the LEDs on page 107
•
Monitoring the AX411 Access Point with the Command-Line Interface
To monitor the AX411 Access Point with the command-line interface (CLI):
•
Use the show wlan access-points command to display a list of access points and basic
settings, as shown in the following example:
root@srx210–1> show wlan access-points
Active access points information
Access-Point
gold
silver
•
Type
vlan
vlan
Ext
Ext
Interface
Radio-mode/Channel
an/36, bgn/6
an/56, bgn/11
To view detailed information about an access point, use the show wlan access-points
detail access-point-name command to display detailed information, as shown in the
following example:
root@srx210–1> show wlan access-points detail gold
Active access point detail information
Access Point
Type
Location
Serial Number
Firmware Version
Access Interface
Packet Capture
Ethernet Port:
MAC Address
104
:
:
:
:
:
:
:
gold
External
Default Location
850001761
10.1.2.3
vlan
Disabled
: 00:12:CF:C7:5D:00
Chapter 14: Monitoring the Access Point
IPv4 Address
Radio1:
Status
MAC Address
Mode
Channel
Radio2:
Status
MAC Address
Mode
Channel
Related
Documentation
•
: 20.0.0.73
:
:
:
:
On
00:12:CF:C7:5D:00
IEEE 802.11a/n
36 (5180 MHz)
:
:
:
:
On
00:12:CF:C7:5D:10
IEEE 802.11b/g/n
6 (2437 MHz)
105
106
CHAPTER 15
Troubleshooting the Access Point
•
•
Troubleshooting Communication Issues Between the AX411 Access Point and the
Services Gateway on page 108
Troubleshooting the AX411 Access Point with the LEDs
Table 29 on page 107 describes the most common problems indicated by the LEDs and
suggests the most common solutions.
Table 29: Typical Access Point LED Problem Indications
LED Indication
Probable Cause
Solution
•
Power LED not
lit
If using the optional power supply, confirm that all cables are connected
correctly and that the power cord is plugged into a functioning outlet.
•
Power LED is
red
The access point is not
receiving power or is
receiving inadequate power
•
All four LEDs
flash
simultaneously
If using Power over Ethernet (PoE):
•
Confirm that the device and port to which the access point is connected
has PoE capability.
•
Confirm that the port is properly configured for PoE. The port should be
configured to allocate 12.4 watts of power for the access point.
•
Confirm that the access point is connected with a CAT5e or CAT6
Ethernet cable shorter than 328 feet (100 meters) in length.
•
Confirm that the Ethernet cable is connected properly. Try disconnecting
and then reconnecting the Ethernet cable.
See “Powering On and Powering Off the AX411 Access point” on page 81
for more information.
Status LED not lit
The access point is not
being managed by the
services gateway.
Confirm that the access point Ethernet port is connected to an Ethernet
port on the services gateway, and that the Link LED is lit on the services
gateway Ethernet port.
Confirm that DHCP is enabled for the services gateway ports to which the
access points are connected. DHCP is enabled by default. For examples of
services gateway configurations that enable DHCP for services gateway
ports, see “AX411 Access Point Configuration Example: Layer 2 Mode (CLI)”
on page 93 and “AX411 Access Point Configuration Example: Layer 3 Mode
(CLI)” on page 94.
107
Table 29: Typical Access Point LED Problem Indications (continued)
LED Indication
Probable Cause
Solution
5 GHz or 2.4 GHz
radio LEDs not
flashing
The access point radios are
not broadcasting or are not
enabled.
Confirm that the country-specific settings are set properly on the access
point. The radios are enabled or disabled according to the country code
setting. For information about country-specific settings, see “Configuring
AX411 Access Point Country-Specific Settings” on page 88.
If more than two access points are connected to the services gateway,
confirm that you have installed the appropriate access point licenses on
the services gateway. Both access point radios will be disabled unless the
services gateway has licenses for the access points. For more information,
see “Installing Licenses for the AX411 Access Point on the SRX Series Device”
on page 87.
Related
Documentation
•
Services Gateway on page 108
•
•
Services Gateway
Problem
The access point Power LED lights steadily green to show that the device has started
properly, but the Status LED does not light green to show that the device is managed by
the SRX Series Services Gateway. This LED indication shows that the access point is not
communicating with the services gateway and is not receiving its configuration from the
services gateway.
Solution
When the access point is not communicating with the services gateway, the issue is
usually with the DHCP configuration of the SRX Series device. Ensure that the services
gateway interface to which the access point is connected belongs to a security zone that
is configured to allow DHCP traffic.
If your network uses an external device as the DHCP server instead of the DHCP server
capability of the SRX Series device, you must configure the DHCP server so that the SRX
Series device is the access point’s default gateway for DHCP.
For examples of services gateway configurations that enable DHCP for services gateway
ports, see “AX411 Access Point Configuration Example: Layer 2 Mode (CLI)” on page 93
and “AX411 Access Point Configuration Example: Layer 3 Mode (CLI)” on page 94
Related
Documentation
108
•
CHAPTER 16
Juniper Networks Technical Assistance
Center
•
Juniper Networks Technical Assistance Center
If you need assistance while troubleshooting an access point, open a support case using
the Case Manager link at http://www.juniper.net/support/, or call 1-888-314-JTAC (within
the United States) or 1-408-745-9500 (from outside the United States).
Related
Documentation
•
Return Procedure for the AX411 Access Point on page 111
•
Locating the AX411 Access Point Component Serial Number and Agency Labels on
page 112
•
Information You Might Need to Supply to Juniper Networks Technical Assistance Center
on page 112
•
Contacting Customer Support
•
Packing the AX411 Access Point or Component for Shipment on page 113
109
110
CHAPTER 17
Returning the Access Point
•
•
Locating the AX411 Access Point Component Serial Number and Agency
Labels on page 112
•
Information You Might Need to Supply to Juniper Networks Technical Assistance
Center on page 112
•
Return Procedure for the AX411 Access Point
Follow the task list provided in Table 30 on page 111 to return an AX411 Access Point or
component to Juniper Networks for repair or replacement.
Table 30: Return Procedure for the AX411 Access Point or Component
Step
Task
1
Determine the part number and serial
number of the device or component.
“Locating the AX411 Access Point
Component Serial Number and Agency
Labels” on page 112
2
Obtain a Return Materials Authorization
(RMA) number from JTAC.
3
Pack the access point or component
for shipping.
“Packing the AX411 Access Point or
Component for Shipment” on page 113
NOTE: Do not return the device or any component to Juniper Networks unless
you have first obtained a Return Material Authorization (RMA) number. Juniper
Networks reserves the right to refuse shipments that do not have an RMA.
Refused shipments are returned to the customer via collect freight.
For more information about return and repair policies, see the customer support webpage
at http://www.juniper.net/support/guidelines.html.
111
For product problems or technical support issues, open a support case using the Case
Manager link at http://www.juniper.net/support/ or call 1-888-314-JTAC (within the United
States) or 1-408-745-9500 (outside the United States).
Related
Documentation
•
•
page 112
•
on page 112
•
•
Locating the AX411 Access Point Component Serial Number and Agency Labels
The AX411 Access Point serial number and agency labels are located on the bottom of
the chassis.
Related
Documentation
•
•
•
on page 112
•
•
If you are returning an access point or a hardware component to Juniper Networks for
repair or replacement, obtain a Return Materials Authorization (RMA) number from
Juniper Networks Technical Assistance Center (JTAC).
When requesting support from JTAC by telephone, be prepared to provide the following
information:
Related
Documentation
112
•
Your existing case number, if you have one
•
Details of the failure or problem
•
Type of activity being performed on the access point when the problem occurred
•
Configuration data displayed by one or more show commands
•
Your name, organization name, telephone number, fax number, and shipping address
•
•
Chapter 17: Returning the Access Point
•
page 112
•
•
Packing the AX411 Access Point or Component for Shipment
This topic includes the following sections:
•
Packing the AX411 Access Point on page 113
•
Packing the Components for Shipment on page 113
Packing the AX411 Access Point
To pack the AX411 Access Point for shipment:
1.
Retrieve the shipping carton and packing materials in which the device was originally
shipped. If you do not have these materials, contact your Juniper Networks
representative about approved packaging materials.
2. Disconnect power from the device.
3. Remove the cables that connect to all external devices.
4. If the device is installed on a wall or rack, have one person support the weight of the
device while another person unscrews and removes the mounting screws.
5. Place the device in the shipping carton.
6. Cover the device with an ESD bag, and place the packing foam on top of and around
the device.
7. Replace the accessory box on top of the packing foam.
8. Securely tape the box closed.
9. Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
Packing the Components for Shipment
Follow these guidelines for packing and shipping individual components of the access
point:
•
When you return a component, make sure that it is adequately protected with packing
materials and packed so that the pieces are prevented from moving around inside the
carton.
•
Use the original shipping materials if they are available.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to
ensure proper tracking.
113
114
PART 7
Index
•
Index on page 117
115
116
customer support...................................................................xiii
contacting JTAC..............................................................xiii
D
Index
documentation
comments on..................................................................xiii
E
Symbols
#, comments in configuration statements...................xiii
( ), in syntax descriptions.....................................................xiii
< >, in syntax descriptions....................................................xii
[ ], in configuration statements.........................................xiii
{ }, in configuration statements........................................xiii
| (pipe), in syntax descriptions..........................................xiii
A
access point
return procedure ............................................................111
site preparation...............................................................33
software features...........................................................10
agency approvals.....................................................................51
alarms
relay contacts..................................................................59
wire specifications.........................................................59
altitude, acceptable range.....................................................7
approvals, agency....................................................................51
B
braces, in configuration statements................................xiii
brackets
angle, in syntax descriptions.......................................xii
square, in configuration statements.......................xiii
C
chassis cluster..........................................................................10
checklist
site preparation...............................................................33
comments, in configuration statements.......................xiii
compliance
general standards...........................................................51
component
return procedure ............................................................111
console port
cable specifications......................................................59
RJ-45 connector pinouts..............................................61
conventions
text and syntax.................................................................xii
curly braces, in configuration statements.....................xiii
electricity
safety warnings..............................................................50
electromagnetic compatibility...........................................57
EMC (EMI)
standards...........................................................................51
encapsulation...........................................................................10
environmental specifications................................................7
Ethernet port
cable specifications......................................................59
RJ-45 connector pinouts............................................60
F
fire safety specifications......................................................43
font conventions......................................................................xii
G
guidelines
electrical............................................................................50
electrical wiring...............................................................57
I
immunity standards................................................................51
installation site
electrical wiring guidelines..........................................57
interface cable
specifications..................................................................59
Internet Protocols....................................................................10
J
JTAC
information required.....................................................112
requesting support........................................................112
M
manuals
comments on..................................................................xiii
N
NEBS standards.......................................................................51
P
parentheses, in syntax descriptions................................xiii
117
pinouts
RJ-45...........................................................................59, 60
power system
requirements...................................................................58
specifications .................................................................58
W
warnings
electrical............................................................................50
wire specifications..................................................................59
R
radio frequency interference...............................................57
return
access point......................................................................111
component.......................................................................111
RJ-45 pinouts
console port.....................................................................60
Ethernet port...................................................................59
routing information.................................................................10
RS-232 (EIA-232) ..................................................................59
S
safety guidelines
general...............................................................................39
installation........................................................................44
safety standards.......................................................................51
safety warning levels
definition............................................................................37
safety warnings
general...............................................................................39
installation........................................................................44
security........................................................................................10
signaling limitations...............................................................57
site
environmental specifications.......................................7
specifications
cable...................................................................................59
environmental....................................................................7
fire safety...........................................................................43
standards compliance...........................................................51
support, technical See technical support
switching.....................................................................................10
syntax conventions.................................................................xii
T
technical support
contacting JTAC..............................................................xiii
temperature, acceptable range............................................7
temperature, nonoperating range.......................................7
thermal output...........................................................................7
118

AX411 Access Point Hardware

Transcription

Similar documents

Xeriscape Garden Plant List Brochure

Q/V Band Opportunities

Product Label - Ferti-lome

SI-9170A/CC SPARROW WIDEBAND MICROWAVE VPX TUNER

WCBA TOH Bingo Card.indd

Production of vegetation spatial-structure maps by per

ES14-OTDR

Quick Guide

Design of a Trans-Horizon Radio Link for Ultra High and