fs150 scarifier parts manual

FS150 SCARIFIER PARTS MANUAL
FS150
HANDHELD
SCARIFIER
MANUAL
Technical Data
Parts manual
136.1162
Product manual
PM .06/07
Design File
DF .16
Customs Tariff Codes
Product
Spares
Assembled Machines
846789009
846799000
Drums
846790000
846790000
Consumables
846790000
846790000
GCM Ltd
Ratcliffe Buildings,
Tuttle Hill,
Nuneaton,
Warwickshire,
United Kingdom.
CV10 0GA
Tel: 0044(0)24 7635 2540
Fax: 0044(0)24 7637 4349
Email: sales@gcmsales.com
Website: www.gcmsales.com
Dealer
FS150 SCARIFIER PARTS MANUAL
PLEASE NOTE
This scarifier head is only designed to fit onto sanders with a 14 mm and
5/8” output spindle. Always clearly state what is required.
WARRANTY
We warrant that the product is free from defects in materials and workmanship.
If such a fault is found within six months from date of purchase from an approved dealer,
the company will replace free of charge all failed components.
Any failed unit must be returned carriage paid to the factory for inspection.
The warranty does not cover failure attributable to wear and tear, accidental damage, site or
operator misuse or lack of maintenance.
We will not accept units under warranty that third parties have attempted to repair
or disassembled
FS150 SCARIFIER PARTS MANUAL
INDEX
Page
Contents
2
Warranty
3
Index
4
EC declaration of conformity
5
Electric Sander Specification
6
Complete FS150 Weights and Part Numbers
7
Safety Instructions
8
Dewalt DW849 Illustration
9
Dewalt DW849 parts list
10
Bosch Sander Illustration Part 1
11
Bosch Sander Parts Pats List
12
Bosch Sander Illustration Part 2
13
Hitachi Sander Parts Illustration
14
Hitachi Sander Parts List
15
FS150 Guard Assembly Parts List
16
FS150 Guard Assembly with cutters parts lists
17
FS150 Guard Assembly Illustration
18
Scarifier head illustration
19
Scarifier head illustration
20
Modification Record
FS150 SCARIFIER PARTS MANUAL
EC DECLARATION OF CONFORMITY (STATIC MACHINES)
We Declare under our sole responsibility that the product(s)
FS150 HANDHELD AND ELECTRIC SCARIFIERS
to which this certificate relates is in conformity with the following directives
Supply of Machinery (Safety Regulations) 1992 (SI 1992/3073)
Supply of Machinery (Safety) (Amendment) 1994 (SI 1994/2063)
Safety of Machinery BS EN292-1&2 1991, BS EN 294 1991, BS EN 294 1993,
BS EN 418 1992, BS EN 457 1992, BS EN 563 1993, BS EN 614 1965
BS EN 1033 1996, BS5378 1980
89/392/EEC Machines Directive
93/44/EEC & 93/68/EEC Amendment to Machines Directive
This equipment must not be put into service until the machinery into
which it is to be incorporated has been declared in conformity with
the provisions of the above mentioned directive.
Certified by
David Aston
General Manager
Date
Thursday, November 15, 2007
FS150 SCARIFIER PARTS MANUAL
FS150 Electric Tools
Hitachi SP18V
Bosch
GP012E
Speed rpm
1400/3400
750/3400
Power Input
1100 w
1200 w
M14
M14
3.0 kg
3.5 kg
Noise Level
85.9db(A)
90db(A)
Sound Power Level
98.9db(A)
103db(A)
Vibration Level
3.14db(A)
5.5(dba)
Spindle Thread
Weight
Noise, Sound and Vibration Levels may vary dependent on material worked on.
® Hitachi is a registered trade name and trade mark of Hitachi Koki co Ltd of Japan. SP18V is a model no of Hitachi
® Bosch is a registered trade name and trade mark of Bosch co Ltd of Germany GP012E a model no of Bosch
® Dewalt is a registered trade name and trade mark of Dewalt Inc of USA DW849 a model no of Dewalt
Hitachi, Bosch, Dewalt accept no reponsibility for the modification of this tool
WARNING
When using this tool the following must be worn
SAFETY GLASSES
SAFETY GLOVES
BREATHING MASK
If you don’t have them do not use the machine
Always read the FS150 and Electric tool Manual
If you haven’t read them do not use the machine
FS150 SCARIFIER PARTS MANUAL
Technical Specification
Part no
M14 Thread
Part no
5/8 UNC Thread
Description
weight
500.4000.110.2
FS150 c/w Hitachi SP18V 110/1/50 c/w Star Cutters
6.076 Kg
500.4000.240.2
FS150 c/w Hitachi SP18V 240/1/50 c/w Star Cutters
6.076 Kg
500.4000.110.1
FS150 c/w Hitachi SP18V 110/1/50 c/w TCT Cutters
500.4000.240.1
FS150 c/w Hitachi SP18V 240/1/50 c/w TCT Cutters
500.4005.110.2
FS150 c/w Bosch GP012E 110/1/50 c/w Star Cutters
6.576 kg
500.4005.240.2
FS150 c/w Bosch GP012E 240/1/50 c/w Star Cutters
6.576 Kg
500.4005.110.1
FS150 c/w Bosch GP012E 110/1/50 c/w TCT Cutters
500.4005.240.1
FS150 c/w Bosch GP012E 240/1/50 c/w TCT Cutters
500.4010.110.2
FS150 c/w Dewalt DW849 110/1/50 c/w Star Cutters
500.4010.240.2
FS150 c/w Dewalt 849 240/1/50 c/w Star Cutters
500.4010.110.1
FS150 c/w Dewalt DW849110/1/50 c/w TCT Cutters
500.4010.240.1
FS150 c/w Dewalt DW849 240/1/50 c/w TCT Cutters
504.4063.8
504.4363.8
FS150 Guard Assembly 41mm Collar No Cutters
504.4067.8
504.4367.8
FS150 Guard Assembly 51mm Collar No Cutters
504.4065.8
504.4365.8
FS150 Guard Assembly 61mm Collar No Cutters
504.4068.8
504.4368.8
FS150 Guard Assembly 74mm Collar No Cutters
504.4063.8.2
504.4363.8.2
FS150 Guard Assembly 41mm Collar c/w Star Cutters
504.4063.8.1
504.4363.8.1
FS150 Guard Assembly 41mm Collar c/w TCT Cutters
504.4063.8.3
504.4363.8.3
FS150 Guard Assembly 41mm Collar c/w TC Cutters
500.4067.8.2
500.4367.8.2
FS150 Guard Assembly 51mm Collar c/w Star Cutters
500.4067.8.1
500.4367.8.1
FS150 Guard Assembly 51mm Collar c/w TCT Cutters
500.4067.8.3
500.4367.8.3
FS150 Guard Assembly 51mm Collar c/w TC Cutters
500.4065.8.2
500.4365.8.2
FS150 Guard Assembly 61mm Collar c/w Star Cutters
500.4065.8.1
500.4365.8.1
FS150 Guard Assembly 61mm Collar c/w TCT Cutters
500.4065.8.3
500.4365.8.3
FS150 Guard Assembly 61mm Collar c/w TC Cutters
500.4068.8.2
500.4368.8.2
FS150 Guard Assembly 74mm Collar c/w Star Cutters
500.4068.8.1
500.4368.8.1
FS150 Guard Assembly 74mm Collar c/w TCT Cutters
500.4068.8.3
500.4368.8.3
FS150 Guard Assembly 74mm Collar c/w TC Cutters
504.4066.8.2
504.4366.8.2
FS150 Drum c/w Star Cutters
504.4066.8.1
504.4366.8.1
FS150 Drum c/w TCT Cutters
504.4066.8.3
504.4366.8.3
FS150 Drum c/w TC Cutters
IMPORTANT
When ordering always check two details
1) Spindle tread is it 14 mm (European) or 5/8 unc (American)
2) Collar size of power unit
3.076 kg
3.076 Kg
3.076 Kg
3.076 Kg
2.076 Kg
FS150 SCARIFIER PARTS MANUAL
SAFETY INSTRUCTIONS
1 Read all instructions before using the tool. All operators must be fully trained in its use and
aware of these safety rules
2 Use personal safety equipment.
3 Always wear safety goggles
4 If the tool appears to malfunction remove from use immediately and arrange for service and
repair
5 Do not use the tool without the safety guard securely in position. Check Daily
6 Always keep hands away from the working attachment fitted to the tool.
7 Always check condition of cutters and flail shafts before use. Check Daily
8 Always when using the tool adopt a firm footing and/or position and grip the tool firmly to be
able to counteract any forces that may be generated whilst using the tool
9 Use only the correct spare parts. Do not improvise or make temporary repairs.
10 Do not lock, tape, wire etc the on/off trigger in the run position. The trigger/lever must
always be free to return to the off position when it is released.
11 Take care against entanglement of moving parts of the tools with clothing, ties, hair, cleaning
rags etc. This will cause the body to be drawn towards the tool and will be dangerous.
12 It is expected that the users will adopt safe working practices and observe all relevant legal
requirements when installing , using or maintaining the tools.
13 17 Take care that the tool exhaust air does not cause a problem or blows on another person.
14 Never lay a tool down unless the working attachment has stopped moving.
15 Always check the speed the condition of cables before use. Check Daily
16 Check always that the material worked on may not cause a fire or is hazardous
17 Always use a suitable vacuum cleaner or dust extraction unit.
FS150 SCARIFIER PARTS MANUAL
DEWALT 849 ELECTRIC SANDER ILLUSTRATION
FS150 SCARIFIER PARTS MANUAL
DEWALT DW849 ELECTRIC SANDER PARTS LIST
FS150 SCARIFIER PARTS MANUAL
BOSCH ELECTRIC SANDER ILLUSTRATION
FS150 SCARIFIER PARTS MANUAL
BOSCH ELECTRIC SANDER PARTS LIST
FS150 SCARIFIER PARTS MANUAL
BOSCH ELECTRIC SANDER ILLUSTRATION
FS150 SCARIFIER PARTS MANUAL
FS150 SCARIFIER PARTS MANUAL
SP18V Parts List
Description
SP18V Parts List
Item
Part No
Qty
Item
Part No
1a
996-070
Gear Cover Assy Including 14-21,23
1
2
982-032
Tapping Screw (W/SP Washer) D5 x 25
3
620-1T1
4
4
37
37
996-078
996-078
Bearing 6201T12VVC3PS2S
1
38
953-265
Distance Piece
1
39A
5
990-864
Felt Packing (A)
1
40
6
953-236
Bearing Cover
1
41
949-509
Rivet D2.5 x 3.2 (10 PCs)
2
7
987-203
Seal Lock Scrtew (W/SP Washer ) M4 x 12
6
42
985-114
Hex Socket Set Screw M4 x 6
2
8A
360-064C
360-064D
360-064E
360-064F
Armature 110v-115v
Armature 120v-127v
Armature 220v-230v
Armature 240v
1
1
1
1
43
608-VVM
Ball bearing 608VVMC2ESPS2L
1
44
931-701
Bearing Lock
1
45
986-172
Dust Seal
1
46
996-082
Rotor (B)
1
986-914
Description
Qty
Housing Assy Inc 42,49
Housing Assy incl 42,49 for Aut
1
Setting Seat
1
Mark Plate
1
Name Plate
9
986-171
Fan Guide
1
10
956-669
Tapping Screws D5 x 55
2
11
981-010
Internal Wire
1
47
47
945-161
961-781
Brush Cap
Brush Cap
2
2
11
990-861
Internal Wire For SU1
1
48
999-043
Carbon Brush (1 Pair)
2
12
12
12
12
12
340-12C
340-102D
340-102E
340-102F
340-102G
Stator Assembly 110v-115v incl 13
Stator Assembly 120v-127v incl 13
Stator Assembly 220v-230v incl 13
Stator Assembly 240v incl 13
Stator Assembly 240v incl 13 for Aus
1
1
1
1
1
49
49
958-900
981-586
Brush Holder
Brush Holder for Aut
2
2
50
957-561
Hitachi label
1
13
930-703
Brush Terminal
2
14
948-011
Retaining Ring for D16 Hole
1
51
51
51
51
996-075
996-076
996-077
996-084
Controller 110v-115v
Controller 120v-127v
Controller 220v-240v
Controller 220v
1
1
1
1
15
938-595
Dust Seal
1
52
930-804
Terminal M4.0 ( 10 Pcs)
1
16
938-394
Lock Pin
1
53
959-140
Connector 50091 (10 Pcs)
1
981-373
Tube D For Cord
2
17
938-597
Spring
1
54
18
938-596
Ring
1
55
986-181
Handle (A)
1
19
938-498
Bushing
1
56
984-750
Tapping Screw (W/Flange) D4 x 16
6
20
938-599
Felt Packing (C)
1
57
981-373
Tube (D)
1
21
937-033
Felt Washer
1
58
959-141
Connector 50092 (10 Pcs)
1
22
981-205
Side Handle for M10
1
59
954-017
Tapping Screw D4 x 12)
1
23
600-0VV
Ball Bearing 6000VVCMPS2S
1
24A
938-395
Sleeve
1
60
60
60
956-632
931-573
953-178
1
1
1
25
996-071
Gear
1
Switch (B) (2P Screw Type) W?lock
110v-127V
Switch (“P Pillat Type) W/lock
Switch (2P Pillar Type) W/Safety Lock
26
937-077
Bearing Cover
1
61
960-266
Cord Clip
1
27
620-2VV
Ball Bearing 6202VVCMPS2S
1
62
62
958-049
940-778
Cord Armor D8.2
Cord Armor D10.7
1
1
28
938-403
Felt Packing
1
29
940-533
Feather Key 3 x 3 x 10
2
30
996-080
Spindle M14
1
30A
996-081
Spindle 5/8 x 11UNC USA and Canada1
1
31
986-179
Seal Packing (B)
1
32A
996-072
Packing Gland
1
63
63
63
63
63
63
63
63a
63a
63a
500-201Z
500-234Z
500.237Z
500-240Z
500-247Z
500-248Z
500-439Z
500-423Z
500-435Z
500-447Z
1
1
1
1
1
1
1
1
1
1
33
993-985
Seal Locking Screw (W/SP Washer) M5 x 16
1
34
953-247A
Rubber Pad (D14 Hole)
1
Cord (Cord Armor D10.7)
Cord (Cord Armor D8.2) For INA,
SUR,ITA,FRG
Cord (Cord Armor D8.2) for GBR
(110V)
Cord ( Cord Armor D8.2) for USA,Can
Cord ( Cord Armor D10.7 ) for Swe,Nor
Cord ( Cord Armor D10.7) for Sui
Cord ( Cord Armor D10.7 ) for Aus, Ngu
Cord ( Cord Armor D10.7) for Sin, Kuw
Cord ( CordArmor D8.2) for GBR 240v
Cord ( Cord Armor B8.2) For Syr
64
985-605
Tapping Screw ( W/Washer ) D5 x 25
4
34
953-255
Rubber Pad (D16 Hole) USA and Canada
1
35
35
953-246Z
953-254
Washer Nut M14
Washer Nut 5/8 11 UNC for USA and Canada
1
1
65
996-073
Handle (B)
1
66
982-095
Tapping Screw ( W/washer) D4 x 20
3
36
956-387
Dust Seal (A)
1
67
939-542
Retaing Ring for D12 shaft (10 Pcs )
1
FS150 SCARIFIER PARTS MANUAL
FS150 GUARD ASSEMBLY
Item
Description
Qty
Collar
Dewalt
DW849
Hitachi
SP18VA
Bosch
GP012E
51 mm
51 mm
74 mm
Makita
9227CB
61 mm
41 mm
00
FS150 c/w Guard 110/1/50
1
500.4010.110
500.4000.110
500.4005.110
500.4011.110
00
FS150 c/w Guard 240/1/50
1
500.4010.240
500.4000.240
500.4005.240
500.4011.240
00
FS150 Guard Assy c/w Collar,
drum, no Cutters
1
500.4067.8
500.4067.8
500.4068.8
00
Electric Tool 110/1/50
1
970.4003.110
970.4001.110
970.4002.110
970.4004.110
00
Electric Tool 240/1/50
1
970.4003.240
970.4001.240
970.4002.240
970.4004.240
01
Outer Shell
1
504.2306
504.2306
504.2306
504.2306
504.2306
02
Inner Shell
1
504.2302
504.2302
504.2302
504.2302
504.2302
1
505.1027
505.1027
505.1027
505.1027
505.1027
505.1027.51
505.1027.51
505.1027.74
505.1027.61
505.1027.41
500.4065.8
500.4063.8
03
Guard
03a
Guard c/w Clamp Collar and Dust
Flap
04
Clamp Collar
1
505.1032.51
505.1032.51
505.1035
505.1039
505.1032.41
05
Anti Vibration Mount M14
1
505.1033.1
505.1033.1
505.1033.1
505.1033.1
505.1033.1
05a
Anti Vibration Mount 5/8 UNF
1
505.1033.2
505.1033.2
505.1033.2
505.1033.2
505.1033.2
06
Spindles
7
504.2301
504.2301
504.2301
504.2301
504.2301
07
Nylon Insert Nut M14 Type T Thin
1
990.1001.114
990.1001.114
990.1001.114
990.1001.114
990.1001.114
08
Plain Washer M14
1
991.1001.14
991.1001.14
991.1001.14
991.1001.14
991.1001.14
09
Socket Button head Screw M5 x 16
3
983.1006.16
983.1006.16
983.1006.16
983.1006.16
983.1006.16
10
Nylon Insert Nut M5
3
990.1001.5
990.1001.5
990.1001.5
990.1001.5
990.1001.5
11
Plain Washer M5
3
991.1001.5
991.1001.5
991.1001.5
991.1001.5
991.1001.5
12
Spring washer M5
3
991.1020.5
991.1020.5
991.1020.5
991.1020.5
991.1020.5
13
Worm Drive Hose Clip 158 mm—
190 mm
1
977.3020.190
977.3020.190
977.3020.190
977.3020.190
977.3020.190
14
Rubber Shroud 3 mm Neoprene
580 mm x 25 mm
1
505.1038
505.1038
505.1038
505.1038
505.1038
15
Socket Head Cap Screw M8 x 30
1
984.1008.30
984.1008.30
984.1008.30
984.1008.30
984.1008.30
16
Spring Washer M8
1
991.1001.8
991.1001.8
991.1001.8
991.1001.8
991.1001.8
17
Plain Washer M8
1
991.1020.8
991.1020.8
991.1020.8
991.1020.8
991.1020.8
18
Plastic Bung Moss Ref 11356
1
904.1000.1
904.1000.1
904.1000.1
904.1000.1
904.1000.1
Serial No Label
1
900.1013.0
900.1013.0
900.1013.0
900.1013.0
900.1013.0
CE Label
1
137.1047
137.1047
137.1047
137.1047
137.1047
FS150 SCARIFIER PARTS MANUAL
IMPORTANT
When ordering always check two details
1) Spindle tread is it 14 mm (European) or 5/8 unc (American)
2) Collar size of power unit
FS150 GUARD ASSEMBLY w/o Cutters
Item
Description
Qty
Collar
Dewalt
DW849
Hitachi
SP18VA
Bosch
GP012E
Makita
9227CB
51 mm
51 mm
74 mm
61 mm
41 mm
FS150 Guard Assembly TCT Cutters 14mm
1
504.4067.8
504.4067.8
504.4068.8
504.4065.8
504.4063.8
FS150 Guard Assembly TCT Cutters 5/8 UNC
1
504.4367.8
504.4367.8
504.4368.8
504.4365.8
504.4363.8
FS150 GUARD ASSEMBLY c/w Cutters
Item
Description
Qty
Collar
20
Dewalt
DW849
Hitachi
SP18VA
Bosch
GP012E
Makita
9227CB
51 mm
51 mm
74 mm
61 mm
41 mm
FS150 Guard Assembly TCT Cutters (14mm)
1
504.4067.8.1 504.4067.8.1
504.4068.8.1
504.4065.8.1
504.4063.8.1
FS150 Guard Assembly TCT Cutters (5/8 unc)
1
504.4367.8.1 504.4367.8.1
504.4368.8.1
504.4365.8.1
504.4363.8.1
FS150 Head Assembly (No Guard) TCT Cutters
(14mm)
504.4066.8.1 504.4066.8.1
504.4066.8.1
504.4066.8.1
504.4066.8.1
FS150 Head Assembly (No Guard) TCT Cutters (5/8
unc)
504.4366.8.1 504.4366.8.1
504.4366.8.1
504.4366.8.1
504.4366.8.1
FS150 Barnacle Head TCT Cutters 14mm (14mm)
504.4116.8.1 504.4116.8.1
504.4116.8.1
504.4116.8.1
504.4116.8.1
FS150 Barnacle Head TCT Cutters 14mm (5/8 unc)
504.4416.8.1 504.4416.8.1
504.4416.8.1
504.4416.8.1
504.4416.8.1
21
TCT Tipped Cutters
21
521.1000
521.1000
521.1000
521.1000
521.1000
22
Washers (TCT Tipped Cutters)
70
506.1000.9
506.1000.9
506.1000.9
506.1000.9
506.1000.9
30
FS150 Guard Assembly Star Cutters (14mm)
1
504.4067.8.2 504.4067.8.2
504.4068.8.2
504.4065.8.2
504.4063.8.2
FS150 Guard Assembly Star Cutters (5/8 unc)
1
504.4367.8.2 504.4367.8.2
504.4368.8.2
504.4365.8.2
504.4363.8.2
FS150 Head Assembly (No Guard) Star Cutters
(14mm)
504.4066.8.2 504.4066.8.2
504.4066.8.2
504.4066.8.2
504.4066.8.2
FS150 Head Assembly (No Guard) Star Cutters (5/8
unc)
504.4366.8.2 504.4366.8.2
504.4366.8.2
504.4366.8.2
504.4366.8.2
FS150 Barnacle Head Star Cutters (14mm)
504.4117.8.1 504.4117.8.1
504.4117.8.1
504.4117.8.1
504.4117.8.1
FS150 Barnacle Head Star Cutters (5/8 unc)
504.4417.8.1 504.4417.8.1
504.4417.8.1
504.4417.8.1
504.4417.8.1
31
Star Cutters
49
520.1000
520.1000
520.1000
520.1000
520.1000
32
Washers (Star Cutters)
56
506.1000.9
506.1000.9
506.1000.9
506.1000.9
506.1000.9
40
FS150 Guard Assembly Solid TC Cutters (14mm)
1
504.4067.8.3 504.4067.8.3
504.4068.8.3
504.4065.8.3
504.4063.8.3
FS150 Guard Assembly Solid TC Cutters (5/8 unc)
1
504.4367.8.3 504.4367.8.3
504.4368.8.3
504.4365.8.3
504.4363.8.3
FS150 Head Assembly(No Guard)Solid TC Cutters
(14mm)
504.4066.8.3 504.4066.8.3
504.4066.8.3
504.4066.8.3
504.4066.8.3
FS150 Head Assembly(No Guard)Solid TC Cutters
(5/8unc)
504.4366.8.3 504.4366.8.3
504.4366.8.3
504.4366.8.3
504.4366.8.3
41
Solid TC Cutters
28
521.5101
521.5101
521.5101
521.5101
521.5101
42
Washers ( Solid Cutters)
35
506.1000.9
506.1000.9
506.1000.9
506.1000.9
506.1000.9
FS150 SCARIFIER PARTS MANUAL
FS150 SCARIFIER ILLUSTRATION
FS150 SCARIFIER PARTS MANUAL
FS150 Scarifier head with Steel Star Cutters
FS150 Scarifier head with Solid Tungsten Carbide Cutters
FS150 SCARIFIER PARTS MANUAL
FS150 Scarifier head with Tungsten Carbide Tipped Cutters
FS150 SCARIFIER PARTS MANUAL
MODIFICATION RECORD
DATE
PAGE
MODIFICATIONS
14/02/2001
1
Warning regarding spindle size added, various corrections throughout manual
03/09/2002
14
Guard c/w Collar added to parts list
18/12/2003
14
Rubber gasket size added
FS150 SCARIFIER PARTS MANUAL
GCM Ltd
Ratcliffe Buildings,
Tuttle Hill,
Nuneaton,
Warwickshire,
United Kingdom.
CV10 0GA
Tel: 0044(0)24 7635 2540
Fax: 0044(0)24 7637 4349
Email: sales@gcmsales.com
Website: www.gcmsales.com
Dealer