Jeep Urban Rider 4 Wheels Stroller
Transcription
Jeep Urban Rider 4 Wheels Stroller
Jeep® Urban Rider Stroller Instructions byby WARNING Please take a moment to read through these instructions before you use your Jeep® Urban Rider Stroller. Important Safety Information: WARNING: • Follow the manufacturer’s instructions. • Put on all the brakes whenever you park the stroller. • Do Not leave children unattended. • Do Not carry extra children or bags on this stroller. • Make sure children are clear of any moving parts if you adjust the stroller, otherwise they may be injured. • Do Not use accessories other than those approved by manufacturer. • To prevent choking hazard, remove and discard all packing material before using this product. • Always use restraint system to keep child from standing up or falling out of the stroller. Use the harness at all times. • Always balance the weight of the stroller evenly. • Always lock the stroller before allowing your child in or near the stroller. • Only use this stroller with a child weighing less than 18kg . • Never use this stroller on stairways or escalators. • Do not allow children to stand on seat or sit on footrest. • This is not an exercise stroller. Do not use product while running, jogging or participating in other athletic activities. • Do not put child in basket. The stroller should not be used near an open fire or exposed flame. • Do not put more than 2kg in the basket. 3 2 PARTS LIST Rear RearWheels Wheels Stroller Stroller Canopy Canopy Front Front Wheels Wheels HOW TO ASSEMBLE YOUR STROLLER Toopen Open Stroller To Stroller 1 1. Release the lock clip on the side of the stroller. 2 2. Push the front of the stroller downward. 3. Press down the folding bar to lock stroller. 3 4 To To Assemble Front Wheels Assemble Front Wheels 1 ToTo Assemble Rear Wheels Assemble Rear 1. Push the front wheels onto the stroller leg until it snaps into place. Repeat for the other front wheel. Tug firmly on each wheel assembly to be sure the wheels are securely in place. 1. Push the rear wheels onto the rear leg tubes until they click into place. Tug the wheels firmly to make sure the wheels are securely in place. Wheels 1 5 To To Assemble Canopy Assemble Canopy 1. 1 Align the canopy connector between the stay tab and the fabric. Snap canopy connector onto the frame. Repeat for the other side. Canopy Connector Stay Tab 2 2. To lock canopy open, push down on both sides of the hinges as shown. 3 3. Secure the 2 sets of velcro straps on both sides of the stroller wings as shown. 6 HOW TO USE YOUR NEW STROLLER Adjust Footrest ToTo Adjust Footrest Adjustable Knuckle Assembly 1 Recline ToTo Recline Seat 1. Press both buttons on each side of the seat. Pull up to raise the footrest. Push down to lower the footrest. 1. To recline the seat, press both buttons on the side leavers. Push down to lower the seat back. 2. To raise the seat, pull up on the back of the seat. Seat 1 Side leavers 2 7 Operate ToTo Operate BrakesBrakes 1. 1 Push both leavers down to lock. Pull both levers up to unlock. Unlock Levers Operate Front ToTo Operate Swivel Swivel Front Wheel Lock Lock Wheel Lock 1 8 1. Push the latches down on the front wheels to unlock and allow the wheels to swivel. 2. Push latches up to lock the wheels in the straight forward position. Secure ToTo Secure Child inChild Stroller in Stroller 1 2 3 ToTo Adjust StrollerStroller Strap Height Adjust Strap 1. Place child in stroller. Hook the shoulder straps to the waist belt. 2. To secure, snap each of the waist belts into the buckles. To release press tabs and pull apart. 3. For a correct fit, adjust shoulder straps and waist band as shown. Height Higher Position 1 Lower Position 1. 9 For a secure fit, the straps should be at or above the child’s shoulder. Adjust the straps to the higher position as your child grows. Stroller ToTo FoldFold Stroller 1 1. First, close the canopy and put the seat in the upright position. Pull the first lock lever up to unlock. 2 2. Push down on the second lock lever. 3 3. Push handle bars forward and squeeze stroller together. 4. Lock the clip on the side of the stroller as shown. 4 10 Care & Maintenance There are many ways to look after and protect your Jeep® stroller. The most important is to clean up any spills or food, before it dries on the fabric. As the covers are not designed to be easily taken off for washing, (for safety reasons) the easiest method to clean is, sponge the surfaces with a mild solution of warm water liquid laundry detergent. Rinse well with clean sponge and leave to dry out of direct sun. Sand and Salt water should be rinsed with a hose and wiped dry to prolong the life of the wheels, axles and other moving parts. Never use petroleum based lubricants on your stroller, the most suitable lubricants are silicone based products. Warranty Jeep® is a registered trademark of DaimlerChrysler Corporation, and is used under license by Born With Style. ©DaimlerChrysler Corporation 2007. Born With Style warrants this product to be free of defects in materials and workmanship as follows: For a period of ONE YEAR from the date of purchase, Born With Style will repair or replace, at its option, the defective product. This warranty is given in addition to (and not in substitute for) applicable statutory rights which you may have. We sincerely thank you for purchasing this Born With Style product. For further information visit: www.bornwithstyle.com.au 11 Contact Details No refunds will be given on used product unless assessed by Karlises as faulty. For all spare parts, repairs or warranty issues, please take your product back to Toys R Us who will contact Karlisles, the service agent on your behalf. For all spare parts, repairs or warranty issues, please contact: Karlisles Phone: 1300 308 435 Email: info@karlisles.com.au Web: www.karlisles.com.au Replacement parts provided by local distributor due to accidental damage or misuse will be charged accordingly. To contact the manufacturer directly: Born With Style PO Box 789 Gladesville NSW 1675, Australia Phone: 1300 855 337 or 02 9816 3837 Email: info@bornwithstyle.com.au Web: www.bornwithstyle.com.au This product meets and exceeds Australian Standard AS/NZS 2088:2000. Personal Record Card Born With Style recommends that you keep a record of important information about your Jeep® stroller. Please complete the information in the space provided. Model Number: Date of Manufacture: Date of Purchase: 12
Similar documents
Jeep Urban Twin Stroller
as faulty. For all spare parts, repairs or warranty issues, please take your product back to Toys R Us who will contact Karlisles, the service agent on your behalf.
More information