Binary Stream Gas Analyser

50 Series
Binary Stream Gas Analyser
Analysis of your Binary Stream
Features:
5.7” QVGA LCD Display
Alarm/Fault Status LED
Direct value reading - % or ppm
Choice of TC Detectors
Solenoids for Switching of Auto Zero/
Span Gas
About the 50 Series
The newest model of the legendary Binary Stream Gas Analyser from AGC
Instruments is used to measure N2, H2, He, CO2, Ar or other gases in Binary
Alarm Status
Rack and Wall Mount Versions
Using hotwire or thermistor elements, an analyser which has accuracy
). To interface with the analyser is via the new
90
Hydrogen Plants
Chemical Plants
measured & displayed to the LCD display ensuring accuracy and stability
Iron & Steel Industry
Gas Blending Equipment
The 50 Series model contains a temperature regulated TCD which
Ammonia Plants
24 hour period.
The Detector consists of an electrically heated hotwire (or thermistor)
through the detector will change the rate of heat loss from the element
AGC Series 5500-PZ
(AGC 50 Series % Unit Purged)
Gas Chromatography since 1965
Air/Ar in He
<10ppm
N2/O2 in He
Air/Ar in H2
N2/O2 in H2
<10ppm
<10ppm
<10ppm
He/H2 in O2
Air/N2 or O2 in
Ar/CO2
He in Ar/CO2
H2 in Ar/ CO2
<50ppm
<100ppm
<20ppm
<20ppm
Display
Ar/CO2 in N2
<200ppm
CH4 in Air
<500ppm
He/H2 in N2
Ar/CO2 in O2
<20ppm
< 200ppm
Ar/CO2 in Air
He/H2 in Air
<100ppm
<50ppm
5.7” Touch Screen LCD Display with CCFL backlight (Backlight/Contrast adjustable)
Easy to use interface
Ranges
0.01 – 100% / 0.001 – 10.00%, 0-1000ppm
1ppm
±5ppm **
required)
90)
< 30 seconds
1 hour typically
Sample Flow Range
Max inlet pressure 2 bar [200kPa]
Minimum Pressure required
0.015 Bar
Zero Gas requirements
1 bar
Flow Measurement
Visual High/Low alarms provided
Detector
4-20mA Outputs
Alarms
Solenoids
Reverse voltage protected
Yes. System alarm relays providing voltage free relay contacts, High / Low / Fault Alarms,
Fault alarm can be used for system debug
Internal Zero/Span/ Sample solenoids provided
Data Logger
internally for retrieval at a later date.
Power
100/115Vac. 220Vac, 50/60Hz, 300W
19” Rack / Bench Top / Wall Mounted / Purged Unit
Dimensions
Rack:
W = 19” Rack H = 4U (180mm) D = 450mm
Wall Mount: W = 500mm H = 500mm D = 300mm
Weight
Rack: 17 kg
Pump
Headquarters
Shannon Free Zone West, Shannon, Co. Clare, Ireland
T: +353 61 471632 F: +353 61 471042
E: sales@agc-instruments.com
Kinetics Technology Corp.
18F-8, No.79, Sec. 1, Xintai 5th Rd., Xizhi Dist.,
New Taipei City 221,Taiwan
T: +886 (2) 26980688 F: +886 (2) 26980686
E-mail: kinetics@kinetics.com.tw
www.agc-instruments.com
www.kinetics.com.tw