New mvr fianchi bombati STANDARD INGLESE 12032014 (1)

Transcription

Refuse Collection Vehicles
Road and Airport sweepers
Quality Management System Certificate ISO9001:2008 Modulo
MD01-2013
PAG.1 DI 13
Autobren s.r.l.
Data/Date
12/03/2014
WASTE COLLECTION VEHICLE BACK LOADING TO STANDARD EN 1501-1 2011 _
TECHNICAL AND FUNCTIONAL CHARACTERISTICS
Compactor MVR
Autobren s.r.l.
Sede legale : via Natta 15-17 36040 Brendola (VI) , Italia
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
Capitale Sociale Euro 400.000 i.v.
C.F. , P.Iva 00606250249
Reg. Imprese : R.E.A. VI 140594
Web: www.autobren.com Email : info@autobren.it
MD01-2013
PAG.2 DI 13
PART 1: TAILGATE
PART 2: BODY
PART 3: CARRIAGE PLATE
PART 4: PACKER PLATE
PART 5: LIFTING DEVICE
PART 6:INTERFACE CHASSIS-BODYWORK
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.3 DI 13
DESCRIPTION AND CONSTRUCTION MATERIAL
TAILGATE (Part 1)
It contains the waste hopper, packer plate and carriage plate
(devices for transferring waste from the hopper to the body and
their compaction on the wall of the ejector plate).
Metal bearing structure consisting of tubular structural steel Fe
510 B, with side plates in Fe510 B 5 mm thick and 5 mm thick
wear resistant steel HARDOX450 ..
Hopper hardwearing steel HARDOX 500 (minimum hardness
HB500) 6 mm thick.
Tailgate attached to the body with two upper hinges and four
lower hooks, all the pins 40 mm diameter in stainless C45.
Tailgate locking to the structure of the body, in the closed
position, in such a way as to ensure thrust resistance of the
compaction system, well as the watertight integrity between
tailgate and body.
Tailgate opening for unloading through N.2 side hydraulic rams
not interfering with the trajectory of waste unloading, tailgate
opening angle 90°, which does not obstruct the release of waste
during unloading.
Tailgate with red safety prop, on the left side, that keeps
opening in the maintenance phase.
The tailgate is provided with an opening guide plate to facilitate unloading of satellite vehicles or manual loading of the
waste.
Height of rave rail with guide plate raised about 1600 mm, with guide plate lowered about 1400 mm.
Sewage discharge valve 2" for leachate drainage.
BODY (Part 2)
High yield strength supporting structure made of tubular rectangle in Fe 510 B.
Base area HARDOX400 wear steel (Hardness HB400) 4 mm thick,
Smooth curved side walls, 4 mm thick in Fe 510 B
Plates containing slurry and roof watertight welded 4 mm thickness in Fe510 B.
Sewage discharge valve for 2".
All welds are performed in a workmanlike manner so as to ensure a perfect seal and in compliance with UNI EN ISO 38344:2006: Quality requirements for fusion welding of metallic materials.
Connection with watertight tailgate, fitted with triangular gasket, which can be replaced easily and fast and guarantees the
perfect seal both in working phase and while transferring the vehicle.
Body with 2 front access openings for maintenance and cleaning, 1.000 X 1.100 mm.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.4 DI 13
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.5 DI 13
CARRIAGE PLATE (and Part 3)
Supporting structure in metallic
carpentry consists of structural tubular
steel Fe 510 B and HARDOX400, which
ensures durability and efficiency of the
parts in direct contact with the waste.
PACKER PLATE (Part 4)
Tubular supporting structure in structural
steel Fe 510 B and anti-wear plate
coating HARDOX400 (HB400), 5 mm thick.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.6 DI 13
LIFTING DEVICE UNDER UNI EN 1501-5 (Detail 5)
INTERFACE CHASSIS-BODYWORK (Part 6)
Structure for added strength in structural steel tubular Fe510B size 100x70 5 mm thick.
Union body and components to the chassis in compliance with the requirements of the manufacturer of the chassis and
in a manner which does not to create abnormal stress in concentrated areas.
SYSTEM DESCRIPTION OF ARTICULATED SINGLE PACKER PLATE COMPACTION (PACKER PLATE + CARRIAGE
PLATE)
Shovel and carriage plate convey the material to the ejector plate.
This latter is moved by a telescopic ram, it is controlled by a pre calibrated valve in such a way as to ensure the backpressure
in the compaction stage.
The compacting unit is guided by a pair of connecting rods are hinged on the packer plate on one side and on the tailgate on
the other side and by a pair of rectilinear guides where translation the carriage plate skate.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.7 DI 13
The movement of the packer plate and carriage plate is
transmitted by 4 double effect hydraulic cylinder.
All cylinders are actuated by hydraulic distributor
controlled by electronic control unit.
Compacting cylinders MVR
Quality polished steel rod
C. Basket Diameter (mm)
C. blade Diameter (mm)
Quality chrome-plated hardened steel rod
Rod diameter c. carrello
Rod diameter packer plate
Diameter pins packer plate
Diameter pins carriage plate
ST.52
110
105
C45
60
60
45 caseback side/ 60
rod side
40 caseback/
60 rod side
Time required to perform a compaction cycle of 30 seconds.
The movement of packet plate and carriage plate does not interfere with lifting device.
The tailgate and the devices of the compaction group in contact with the waste are all in anti-wear steel HARDOX.
The compaction functions and safety devices are managed by a single electronic control unit unit that has continuous control
of the various job functions.
• Operating functions manual and automatic;
• Functions relating to the protection of the staff involved in the equipment operation;
• Functions relating to the self-protection of the equipment and of the equipment elements;
• Functions of reporting and alarm;
All commands and their position are made in accordance with 1501-1_2011
All the electric and electronic components responds to technical specifications such as to ensure a smooth operation with
temperatures between -20 and +50 ° C.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.8 DI 13
OPERATING SYSTEMS
The equipment is equipped with a device for automatic adjustment of the motor speed which allows, with the insertion of
the PTO, the automatic attainment of the correct scheme of the engine vehicle rotation and, at the same time, the
cancellation of the effect possible action on the accelerator pedal in the cab.
Implants are made in such a way that the various operational elements do not exceed the limits established by the peripheral
speed of the EN 1501.
CYCLES OF COMPACTION
1 - Transfers of waste by tipping waste container or manual loading
2 - Descent Carriage plate with open blade (1st compression waste on the hopper).
3 - Blade lock for rotation (2nd compression waste on the hopper)
4 - Ascent Carriage plate with Packer plate closed (loading the material into the hopper and 3rd compression compaction of
rejection towards the wall of the ejector plate)
The guide skate of packer plate and carriage plate are made of hardened c45, resistant to creep.
The electro-hydraulic system of operation of the equipment is controlled from a control panel on the outer right side of the
tailgate, the hydraulic pump with PTO gearbox is inserted from the cabin.
Command operating cycles:
1)
MANUAL CYCLE SINGLE PHASES OR CONTINUE WITH COMMAND HOLD-TO-RUN
2)
CONTINUOUS AUTOMATIC CYCLE (ONLY WITH GUIDE PLATE CLOSED)
3)
SYNCHRONIZED SINGLE CYCLE WITH LIFTING DEVICE
Emergency buttons and rescue of the compaction system: red STOP button and yellow EMERGENCY to release the
compression zone in the cargo area.
Lifting device in accordance with UNI EN 1501-5: 2011 for containers uni en 840
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.9 DI 13
UNLOADING OF THE BODY
Unloading from the back side after lifting of the tailgate, system built with the best structural characteristics, made to
withstand, without deformation, all the stresses of the various work phases.
Material ejected from the movable wall sliding inside the body called Ejector Plate
Ejector plate moved by hydraulic telescopic cylinder double acting, with extensions lapped and chromates, controlled by
valve pre-calibrated to ensure against pressure during compaction, sliding on two lateral guides, coupled via four sliding
blocks self-lubricating plastic material special antacid and wear NYLATRON PA6GMN.
Ejector plate made of metal structural for support all stresses of compaction and unloading, it is consisting of structural steel
tubular 4 mm thick Fe510B with sheet metal cover thickness 3 mm in Fe510 B and hardox400.
The ejector plate sticks out rearward beyond the profile of the body of 100 mm.
The ejector plate, even in the presence of an eccentric action, does not change its perpendicularity respect the longitudinal
axis of the body and it absorbs transverse stresses, preventing the flexion on the stem of the sliding ram.
The slide rails of the plate prevents the accumulation zones of rejection.
The sliding supports are long lasting and easy to replace.
Unloading time of the full body is about 120 sec.
GEOMETRIC INTERFERENCE BETWEEN THE ELEMENTS OF DIFFERENT OPERATING SYSTEMS.
In reference to:
• Compaction device and system lifting device / container during emptying.
• Lifting device and rear footboards.
• Device eject waste and rear door.
none of the mechanical organs mentioned interferes with other elements of the equipment.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.10 DI 13
HYDRAULIC SYSTEM
The plumbing is carried out in accordance with the UNI EN ISO 4413:2012Hydraulic fluid power
– General rules and safety requirements for systems and their components The pressure is originated by 2 pumps driven by PTO on the gearbox
applied: by PTO gearbox that manages the power taken from the engine
of the vehicle is driven a hydraulic gear pump or vane which operates the
compaction systems, a further dedicated pump drives the functions
and discharge lifting device.
Hydraulic circuit consists of galvanized steel tubes and hoses model 4SH and R2T.
The ACILITIES equipped with pressure relief valves, safety valves, and pressure control devices.
The pump and PTO are produced and marketed by a leading European company.
Tools command work PTO (PTO) in the cabin.
Tank or hydraulic lio provided with visual external indicator level and temperature gauge, ball valves closing out oil from the tank
in case of breakage of pipes and filler cap / filler with metal filter and breather valve.
Return to the plant, are after the 2 oil filters.
The application of PTO can be carried out in accordance with the models provided by the manufacturer of the truck, approved,
activated by electric switch that controls the pneumatic valve.
The vehicle is configured to automatically increase the number of engine revolutions to the inclusion of the PTO and inhibit the
accelerator pedal to maintain the oil flow established by Autobren and not variable by the operator.
Conditions for PTO engagement:
adequate air pressure (8 bar)
platforms without occupants
emergency buttons switched off
for vehicles with manual transmission must be in neutral gear and the parking brake engaged
For vehicles with automatic transmission parking brake is engaged
To switch off:
For vehicles with manual transmission: push the clutch pedal for 3 seconds
For vehicles with automatic transmission: disengage the handbrake
ELECTRICAL SYSTEM
The electrical system is realized accordance with the rules 2006/95/EC and 2004/108/EC
The electrical system has a degree of protection IP65 and is designed to be easily accessible for inspection and maintenance,
and it is made airtight.
The electrical system of the equipment is separate from the electrical system of chassis and is sectioned by the main switch.
All the control elements have appropriate arrangements for protection against ingress of water and dust.
With every facility is provided clear and detailed wiring diagram.
The vehicle has all the warning signs and lighting prescribed by the rules of the road.
The lighting fixtures are visible in any operational framework of the vehicle (excluding the steps of discharge of waste).
The vehicle is provided with:
- Repeat rear lights.
- Two yellow flashing beacon (front and rear operated from the cab).
- White light beacon adjustable applied over the tailgate to be used during night work,
is protected against shocks and installed in an area of not getting in the way.
- reverse gear acoustic alarm.
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.11 DI 13
PNEUMATIC SYSTEM
The pneumatic system installed on the compactor is fed from the compressor of the vehicle and allows the
insertion of the PTO, the moving of lifting device and accessories type dust suppression.
This circuit is structured in such a way as not to produce pressure drop that may penalize the plant the production
of compressed air of the chassis in relation to their own services of the chassis the same as prescribed by UNI EN
ISO 4414:2012 Pneumatics - General Rules and safety requirements for systems and their components.
Lifting device to uni en 1501-5 for containers from 120 to 2000 liters (detail 5)
The containers are lifted and inverted at an angle of 45 ° to guarantee their total and complete emptying.
The whole system is robust and hard about levers, pins and their attachment points.
The maximum capacity of the system lifting device is 1000 kg.
The arms are foldable lifting device, no element protrudes rearward beyond the outline of the vehicle in the rest position,
and all are opened individually without interfering with those at rest.
Handling bins made in such a way as to prevent the spillage of waste ground and leachate during emptying.
There are no surfaces / edges that impede the complete unloading of materials inside the tailgate.
Lifting device with open covers for bins with flip top lid.
Time required for a complete cycle power (taken from the ground, lifting / tipping and storage container on the ground):
30 seconds.
REAR FOOTBOARD HOUSING OPERATORS
Pair of rear footrests approved in accordance with the standard 1501-1:2011, with the Machinery Directive 42/2006CE. with
adequate handholds designed so as to provide a good structural strength and easy interchangeability.
Commands accessible from the platform: Emergency stop button, called a driver.
EQUIPMENT AVAILABLE BY REQUEST
- Weighing System under body
- Weighing System on lifting device
- Dust suppression system
- Automatic central greasing system
- Container of 1000 liters integrated with the time bins for manual transfer of waste from bins 40
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.12 DI 13
PROFILE MOTOR VEHICLE
All mobile devices are provided for the collection are falling completely within the outline in the rest position, does not
thereby creating protrusions especially in the rear area of the vehicle.
STATIONS OF CONTROL
SIDE RIGHT REAR CAP
Pushbutton panel positioned in the rear area, from that location, the operator is able to perform the following
operations:
• Selectors controls for the compaction system;
• Selectors commands to the lifting device;
• How emergency stop;
• Lighting switch of the mouth of the load;
• Device communication with the driver;
• Operating relative at the open covers system;
The controls in a protected position, protected from
accidental operation, controls maintained action, so that
it blocks the function immediately upon release of the
control selector.
Lifting device controlled by the right side of the tailgate
(optional the control is repeated on the left side).
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.13 DI 13
1. Buzzer call staff serving in ground conductor in the cab
2. Rescue command button mushroom yellow-acting maintenance, is pressed to relea
any trapped people between the compaction system and the hopper, the drive
control the light between the compaction system and the load area increases w
'opening of the shopping carriage plate. This command overrides all other contro
including the emergency shutdown system, the system must be reset before it c
again operate the compaction cycle;
3. Emergency lock red button to withholding when pressed stops all functions of t
compactor, compactor are positioned on the two buttons on either side of t
tailgate operators in the area. The PTO is inserted to allow the command
complete the rescue of the possible opening cycle.
4. Aut-Man-Econ stable three-position switch selects the desired duty cycle;
Continuous cycle of compaction with consent from the 5 button (START / RESET);
Manual control of compaction using the joystick
Single-cycle compaction triggered by the 1 button (START / RESET) or the sensor
reading of the position of the piston of the time bins.
5. Green Start button starts the automatic cycle or the economic cycle in the old ways-t
run:;
6. Lighthouse Work: two-position selector inserts the stable operation of the beac
lighting the hopper zone when I turned on the lights of the chassis;
7. Handling packer plate carriage plate: selection via joystick action controls, controls
manual cycle, the individual movements
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.14 DI 13
CABIN
Control panel accessible from the driver and he can do the following
operations:
• Inserting the PTO;
• Control of flashing headlights
• Display monitor from the rear cargo area
Optional on request:
- Opening tailgate
- Movement ejector plate
- Partial closure tailgate
- Enabling external commands
- Display for abnormalities
- Hours PTO
- Display printer and weighing system
- Key switch lock function compactor
- Key switch for inhibition safety maintenance
- Device georeferenced with internet access
OUTDOOR STATION BETWEEN CABIN AND BODY ON THE LEFT SIDE (COMMAND CYCLE UNLOADING)
Lever distributor for opening tailgate, ejector plate movement.
Electric button to increase rpm to increase oil flow during discharge
STATION OUTSIDE ON THE LEFT SIDE BODY (CLOSED TAILGATE)
Operating device for downhill tailgate with dual simultaneous control anti shearing
This position allows the vision of the coupling zone tailgate box by the operator.
SAFETY DEVICES AND COMPLETION
• Exhaust pipe vertical gas up to the upper edge of the equipment integrated into the housing
• High-visibility reflective panels.
• Sidebars anti interlocking.
• Fenders with rear mud flaps.
• Danger signals, safety and warning are consisting of ideograms located at the work zones.
• Marker light.
• Staining equipment according to customer specifications
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249
MD01-2013
PAG.15 DI 13
MODEL EQUIPMENT
CAPACITY
3*
(m )
MTT
CHASSIS
(t)
MVR10
10,5
14
PRESSURE MAX
PACKER PLATECARRIAGE
PLATE
132
TARE
EQUIPMENT
APPROXIMATE
(kg)
4.850
MVR12
12,5
16
132
5.000
MVR14
14,5
16/18
147
5.150
MVR16
16,5
16/18
147
5.400
Autobren s.r.l.
via Natta , 15 -17
36040 Brendola (VI)
Tel. +39 0444 400681 Tel. +39 0444 601051
Fax. +39 0444 601350
C.F. , P.Iva 00606250249

New mvr fianchi bombati STANDARD INGLESE 12032014 (1)

Transcription

Similar documents

hawaiianparty - Comune di Quinto Vicentino

Vulcanizers

comunicato stampa

Dastych, H. 1999. Mopsechiniscus frenoti sp. n., a new water-bear

IVOIRE

WIDE WEB - STConverting

C Cooling System - The Rolls-Royce and Bentley Technical Library