Annual Sentech Catalog

Transcription

Annual Sentech Catalog
SEN TECH
Sensor Technologies America, Inc.
Industrial & Medical Cameras
2012
Product Catalog
www.SentechAmerica.com
Content
Introduction
HD Cameras
High Definition Output Cameras with DVI or SDI output,
board or cased, CCD with true HD 720p at 60fps.
10
USB 3.0 Cameras
16
USB 2.0 Cameras
18
GigE Vision® Cameras
34
Auto Focus Cameras
44
Camera Link® Cameras
52
Features Sentech’s upcoming Micro CMOS USB 3.0
cameras with 5 Megapixel Resolution.
Features Micro CMOS, Standard (board or cased) and
Hardware Trigger USB 2.0 Cameras.
Features Standard, PoE and Power Plus (with a
programmable Xilinx FPGA).
Features new HD CMOS and CCD sensors with various
optical zoom capabilities (11x, 18x and 22x).
Standard & High Speed Cameras featuring CCD, Kodak
and CMOS sensors in compact housing.
Progressive Scan Cameras 62
Features board and cased models in analog or raw
digital output (ideal for OEM applications)
Specialty Cameras
72
Analog Cameras
78
Features ruggedized transit cameras and night vision
camera.
Features a full line of NTSC, PAL, CCIR and EIA board,
cased and remote head analog cameras.
Accessories
2
98
www.SentechAmerica.com
Dear Reader,
Today Sentech is known as one of the
leading manufacturers of digital cameras;
however Sentech is virtually the only camera
company who possesses a strong history of
designing and producing analog cameras
while successfully transitioning into the
digital camera world. With our transition
into digital cameras, we brought with us a
wealth of knowledge and “know-how” for camera hardware
and design. This “know-how” gives our cameras an unrivaled
quality in the industry. Today, we are a leading supplier of
digital cameras and our software and SDKs are considered
among the best, easiest to use, and most comprehensive in the
market. Here at Sentech, we combine the power of exceptional
software and drivers with excellent hardware design.
With nearly half of our team as engineers, we are capable of
providing an unrivaled quality of support to our customers.
Our constant attention to customer focused innovations during
our development process is the basis for our success. This year
we are releasing many new and exciting cameras, ranging
from our new HD series, a brand new line of low cost CMOS
Camera Link cameras, a new HD Auto Focus camera, miniature
USB cameras which are 1” cubed in size, and the new USB 3.0
camera line. All of these products can be found in full detail
further into this catalog.
Since 1987, Sentech has been providing our customers with
high quality industrial and medical cameras. For those that
have been with us, I thank you for your continued support. And
if you have yet to join our long list of friends, I personally invite
you to benefit from our 25 years of success in industrial camera
design technology.
Sincerely,
Tom Campbell
VP of Sales and Marketing
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
3
SEN TECH Team
Corporate
Management
U.S.
Sales
Masumi
Kawakami
Tom
Campbell
Kim
Mizuno
President
VP Sales
& Marketing
VP Operations
& Engineering
Mick Akiyama
Kevin Watanabe
Miyuki Campbell
Cyndi Logan
Office Manager
Accounts Receivable
Engineers
Chance Holder
National Sales Manager
Support
Satoko Silva
Order Processing
Peter Silva
Zachary Crossland
Logistics
IT & Marketing (Contracted)
Adam
Westcott
Sam
Aimono
Michelle
Westcott
International Branch
Manager
Technical Manager
Office Manager
Robert Bush
West
Stefan Bauboeck
Central
Chris Vincenzo
South
Tyler Flaherty
Northeast
Canada,
Central &
South America
Sales
Sentech
Europe
For more
information,
see page 102.
4
www.SentechAmerica.com
Francisco Siles
Canada, Central & South America
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
5
SEN TECH Offices
Sensor Technologies America, Inc.
Sentech’s world marketing and sales headquarters
Sales Territory: USA, Canada, Europe, Africa,
South America, India, Middle East
Aegis
Aegis is located in Arizona, with sales offices in Carlsbad,
California and Chicago, Illinois. Aegis offers excellent
customer service and technical support.
Contact:
1345 Valwood Parkway, Suite 320
Carrollton, TX 75006
972-481-9223 - Telephone
877-736-8324 - Toll Free in US and Canada
972-481-9209 - Fax
Carolynn Larson Garcia
1465 N. Fiesta Blvd., Suite 101
Gilbert, AZ 85233
480-635-8400 - Telephone
480-635-9272 - Fax
Email: carolynn@aegiselect.com
Website: www.aegiselect.com
Website: www.SentechAmerica.com
Sensor Technology Co., Ltd.
Sentech’s world design and manufacturing headquarters
Sales Territory: Japan, Korea
7F, Harada Center Building
9-17, Nakacho 4 Chome
Atsugi-City, Kanagawa
243-0018 Japan
+81-46-295-7061 - Telephone
+81-46-295-7066 - Fax
Website: www.sentech.co.jp
Audio Video Supply
Located in San Diego, California, AVS is a major
distributor of industrial, security, and broadcast video
products.
China Sensor Technology, Inc.
Contact: Sales Territory: China
Rm.2103, Building D, Guang-Da Fair Center, No.80 Caobao Road
Xuhui Region, Shanghai, China 200235
+021-6432-5394 - Telephone
+021-6432-5384 - Fax
Email: james@sentech.co.jp
InterTest, Inc.
Cliff Moore
4575 Ruffner St.
San Diego, CA 92111
800-284-2288 - Telephone
858-565-7845 - Fax
Sales Territory: Taiwan
3F-6, No. 9, Aiguo W. Rd.,
Jhong Jheng District,
Taipei City 100, Taiwan, R.O.C.
+886-2-2383-2331 - Telephone
+886-2-2370-8775 - Fax
Email: taiwansales@sentech.co.jp
Contact:
Email: sales@avsupply.com
Website: www.avsupply.com
InterTest, located in Columbia, NJ, is a leading provider
of high quality camera integrations and modifications for
industrial visual inspection systems.
Taiwan Sensor Technology, Inc.
6
US Distributors
Thomas F. Daly
303 State Route 94
Columbia NJ 07832
908-496-8008 - Telephone
908-496-8004 - Fax
Email: info@intertestinc.com
Website: www.intertestinc.com
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
7
Distributors
International
Many of Sentech's customers are multi-nationally based. In our efforts to further support
our customers, Sentech has expanded its sales and support bases internationally as well.
americas: Canada
asia: Hong Kong
Bock Optronics Inc.
Bock Optronics is located in Toronto, Canada.
Since 1987, Bock Optronics has served the
market as a comprehensive distributor for
innovative and progressive manufacturers of
electronic imaging hardware.
Contact:
Hans Bock
14 Steinway Blvd., Unit 7
Toronto, Ontario
M9W 6M6 Canada
(416) 674-2804 - Telephone
(416) 674-1827 - Fax
Email: hansbock@bockoptronics.ca,
Website: www.bockoptronics.ca
middle east: Israel
Itzik Mashiach
9th Bareket St.,
Kiryat Matalon,
Petach Tikva, 49517, Israel
+972-3-9780800 - Telephone
+972-3-9780829 - Fax
Email: info@l-tech.co.il
Website: www.l-tech.co.il
8
Videor
Located in Hong Kong, Compuvision
specializes in machine vision components
and systems for the manufacturing
industry. With over 15 years experience
in optics, lighting, frame grabbers, and
imaging, Compuvision provides strong
customer solutions and support.
Videor is located in Rödermark, Germany
with sales offices located in several European
countries. Videor is a leading distributor
of industrial, security and broadcast video
equipment and lenses.
Contact:
Florian Nadolny
Contact:
Carl-Zeiss-Straße 37
63322 Röedermark, Germany
+49 6074 888 106 - Telephone
+49 6074 888 176 - Fax
Email: f.nadolny@videor.com
Website: www.videor.com
K.Y. Law
Unit 1025, Nan Fung Center
264-298 Castle Peak Road
Tsuen Wan, N.T., Hong Kong
+852 2479 8476 - Telephone
+852 2479 3948 - Fax
Email: compuvsn@hkstar.com,
Website: www.compuvision.com.hk
asia: Singapore
europe: Italy
Hi-Tech Electronics
Pte. Ltd.
(Lewenstein Technologies Ltd.)
Contact:
europe: Germany
Compuvision
L-Tech Ltd.
L-Tech is a professional engineering and
technical solutions provider for video imaging,
propulsion control, positioning, medical
imaging and optics.
Our international distributors have been selected based on a process which carefully
evaluated both their customer support and technical support abilities.
Hi-Tech is headquartered in Singapore, with
offices in Malaysia, Indonesia and Thailand.
Hi-Tech provides a wide range of products
for vision applications, including Sentech
cameras and vision software.
Contact:
Rapitron s.r.l.
Located in Milano, Italy, Rapitron has over
25 years experience in the professional and
industrial video markets. Rapitron offers a
wide range of products including Sentech
cameras targeted for security, industrial,
electro-medical and scientific applications.
Contact:
Eric Yeo
60 Kaki Bukit Place
#01-11 Eunos Techpark
Singapore 415979
+65 6747 2555 - Telephone
+65 6747 2511 - Fax
Email: sls@hitech.com.sg
Website: www.hitech.com.sg
www.SentechAmerica.com
europe: United Kingdom
Raffaele Picciotto
Via Washington 59
20146 Milano, Italy
+39 02 659 8282 - Telephone
+39 02 654 525 - Fax
Email: rafpi@rapitron.it
Website: www.rapitron.it
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
Alrad Instruments Ltd.
Alrad Instruments is located in Newbury
Berkshire, England. Alrad is an established
family business which has specialized in the
distribution of video equipment for scientific
and industrial applications.
Contact:
Raf Slotwinski
Alder House, Turnpike Road Industrial Estate
Newbury, Berkshire RG14 2NS, U.K.
+44 (0) 1635 30345 - Telephone
+44 (0) 1635 32630 - Fax
Email: sales@alrad.co.uk
Website: www.alrad.co.uk
9
HD Output Series
SEN TECH
HDOutput Overview
Models
Sensor
Resolution
Frame Rate
1/3” CCD
720p
60 or 50
Type
Board
Cased
DVI Output
STC-HD133DV
STC-HD133DV-B
SDI Output
STC-HD133SDI
STC-HD133SDI-B
Board
Cased
Cables (HDMI)
Key Features
• HD 720p at 60 or 50 FPS
• CCD Progressive Scan Sensor (1280 x 720)
• True 16:9 Aspect Ratio (No Scaling)
• DVI output via HDMI or HD-SDI via BNC
• Excellent Detail & Color Replication
• Direct Connect to HD Monitors via DVI/HDMI
• On Screen Menu with a Wired Controller
10
Accessories
www.SentechAmerica.com
CAB-HDMI-1.8
CAB-HDMI-3
CAB-HDMI-4.5
CAB-HDMI-7.6
CAB-HDMI-MINI-2
CAB-HDMI-MINI-3
Hand Held Remote Control
JIG-HD133
Programming Jig
JIG-RS232COM-AF
Power Supplies
PWR-DC12-500R
11
HD Output Series
High Definition Models
Board
Cased
The STC-HD133DV is an HD
Digital output camera, ideal
for applications requiring
direct-connect monitor
viewing with High Definition
resolution. This CCD
camera outputs a true
HD 720p, 16x9 image at
60fps. It also features
Cased Models
DVI Output 720p
STC-HD133DV
STC-HD133DV-CS
All Images Depict
DVI Models
40 mm
Board Models
720p
DVI Output
C Mount
C Mount
CS Mount
CS Mount
HD-SDI Output 720p
STC-HD133SDI
STC-HD133SDI-CS
the capability to program
28 individual DSP profiles
and has a programmable
on-camera push-button for
manual control. The HD
Output series is available in an
ultra-compact cased or board
configuration with DVI or
HD-SDI output.
720p
C Mount
CS Mount
CS Mount
720p
60 fps
STC-HD133SDI-B
STC-HD133SDI-BCS
46.7
35 mm
35
40
12
CCD Sensor
HD-SDI Output
C Mount
45.8
STC-HD133DV-B
STC-HD133DV-BCS
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
13
Specifications
SEN TECH
Upcoming Product
DVI Output
SDI Output
STC-HD133DV
STC-HD133SDI
STC-HD133DV-B
STC-HD133SDI-B
Resolution
Imager Sensor
HD Active Picture Elements
Chip Size
Cell Size
Minimum Illumination
720p
1/3” CCD (ICX445AQA)
1280 (H) x 720 (V)
6.26 (H) x 5.01 (V) mm
3.75 (H) x 3.75 (V) μm
5 Lux at F1.2 at 50 IRE,
AGC ON and 1/60 second shutter speed with IR cut filter
Sync System
Internal
Video Output
DVI 1.0 conformity (RGB, 1280 (H) x 720 (V), 60 Hz / 59.94 Hz / 50 Hz)
HD-SDI (SMPTE292M) (YPbPr, 1280 (H) x 720 (V), 60 Hz / 59.94 Hz / 50 Hz)
ALC
Shutter Speed
Gain
Digital Gain
Gamma
White Balance
Mirror Image
Optical iris, auto electronic shutter and AGC
Adjustable shutter speed
Up to 1/100,000 seconds at 60 Hz or up to 1/83,947 seconds at 50Hz
AGC or Fixed gain
Gain range: 0 to 18.3 dB
Up to 5.98 dB
1.0, 0.9, 0.8, 0.7, 0.6, 0.5, 0.45, 0.3 or manual gamma
Auto white balance / manual white balance / push-to-set white balance
Normal Image and Horizontal Flip
DSP Presets
28 EEPROM - loadable picture modes (DSP profiles);
Line Generator
Both horizontal and vertical with all available colors
Thickness adjustable via the UART communication
Shadow Mask Generator
Horizontal and vertical w/ shading level adjustment
via the UART communication
Communication
Character Generator
Pixel Blemish Collection
Up to 64 pixel blemish static collection
9Vdc to 15Vdc (Typically: 12Vdc)
< 3.0 W, < 333mA
Storage Temperature
Dimensions
Weight
• Low Cost HD
• 1080p at 60fps / 720p at 60fps
• 16 x 9 Format
• High Sensitivity
• DVI or HD-SDI Output
UART communication via 3.5 φ stereo jack
Consumption
Operating Temperature
1080p / 720p
Built-in character generation function via the UART communication
Input Voltage
Interface Connectors
Video Output
Power Output
External Control
Communication
Coming Soon
CMOS Sensor
HDMI Connector
12V Power Jack
SM06B-SRSS (JST) 6 Pin Connector
3.5 Φ Stereo Jack
BNC Connector
12V Power Jack
3.5Φ stereo jack with SW board
3.5 Φ Stereo Jack
0° ~ 40°C (32° ~ 104°F)
-30° ~ 65°C (-22° ~ 149°F)
40 (W) x 40 (H) x 45.8 (D) mm
(1.57” x 1.57” x 1.80”)
35 (W) x 35 (H) x 46.7 (D) mm
(1.37” x 1.37” x 1.83”)
Approximately 120g (4.23oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
15
USB 3.0 Series
SEN TECH
This year Sentech will be introducing the brand new
USB 3.0 interface technology to our clients in the form
of the USB 3.0 CMOS series. The CMOS USB 3.0 series
will be available in 5 to 0.3 MP resolutions with 14
to 123 fps and both color and monochrome models.
These low cost, high performance cameras will be
compatible with all standard industry drivers, and the
Sentech Viewing Software and SDK. Look for the CMOS
USB 3.0 series to be available in mid-2012.
Coming Soon
New Features of USB 3.0
New! USB 3.0 Models
STC-MBA5MUSB3
STC-MCA5MUSB3
B/W
Color
►► Allows simultaneous reading/writing
►► 10x times faster than 2.0
►► Less power consumption
►► 900mA for 3.0 / 500mA for 2.0
Key Features
• 5MP QSXGA Resoluion
• 1/2.5” CMOS Sensor
• Frame Rates (14 ~123 fps)
• Color or Monochrome Models
• Full Triggering Functions
• Sentech Viewing Software and SDK
• All Standard Industry Drivers
• Low Cost
16
The new USB 3.0 interface introduces many new features
and updates to the already amazing USB 2.0 interface.
www.SentechAmerica.com
►► Backwards Compatible with USB 2.0
Applications
• Microscopy
• Metallurgy
• Industrial
• Biometrics
• Biophotonics
• Astronomy
17
USB 2.0 Series
SEN TECH
USB 2.0 Overview
60fps
30fps
22fps
15fps
Frame Rate
2 MP
1.4 MP
1.2 MP
0.3 MP
Resolution
19fps
Sensor
0.8 MP
Models
1/3”
Hardware & Software
Trigger
1/1.8”
(Software Trigger)
1/2”
Standard Cased
Cased and Board
STC-TB\TC33USB
STC-TB\TC83USB
STC-TB\TC133USB
STC-TB\TC152USB
STC-TB\TC202USB
Ultra-Small Cased
STC-MB\MC33USB
Standard Board
STC-MB\MC83USB
(Software Trigger)
STC-MB\MC133USB
STC-MB\MC152USB
New!
STC-MB\MC202USB
Ultra-Small
Key Features
•
•
•
•
•
•
•
•
18
VGA ~ UXGA Resolution Color or Monochrome
Low Light Extended Integration
Variable Partial Scan and Clock Speed Control
Horizontal & Vertical Flip
Drawing & Annotation
Standard USB or Lock Type Connectors
DirectX, Twain, Linux, Halcon & NI LabVIEW TM Drivers
Sentech Viewing Software and SDK
www.SentechAmerica.com
Accessories
Cables
CAB-USB 1.8
CAB-USB-1.8MB *
CAB-USB-2L
CAB-USB-2LMB *
CAB-USB-3
CAB-USB-3L
CAB-USB-3LMB *
CAB-USB-3MB *
CAB-USB-5L
Lens Mount
C-Adapter
Tripod Mount
TP-HCA *
* accessories for
ultra-small models
Lenses
Various C-Mount Lenses
Various CS-Mount Lenses
Various Telecentric Lenses
19
USB 2.0 Series
Ultra-Small Models
Cased Ultra-Small
The Ultra-Small
USB series is the
next generation
of Sentech’s USB
2.0 lineup. This
new generation
of USB cameras
are only 1.1” x 1.1” x 1.7”. Despite the small
size, these models utilize the same industry
leading Sentech image software, drivers
and SDK as their predecessors. In addition
to this, these new cameras feature 8, 10
and 12 bit output, as well as full machine
vision triggering functionality.
Software include:
New!
Ultra-Small
Models
Sentech Viewing Software
Standard & Trigger SDKs
Drivers include:
DirectX
Twain
Linux
Halcon
NI LabVIEW TM
28 mm
37
2 MEGAPIXEL
B/W
Color
1.4 MEGAPIXEL
B/W
Color
Color
SXGA
STC-MB152USB
STC-MC152USB
1.2 MEGAPIXEL
B/W
UXGA
STC-MB202USB
STC-MC202USB
SXVGA
STC-MB133USB
STC-MC133USB
0.8 MEGAPIXEL
B/W
Color
28
0.3 MEGAPIXEL
B/W
Color
20
STC-MB83USB
STC-MC83USB
www.SentechAmerica.com
STC-MB33USB
STC-MC33USB
XGA
VGA
21
Specifications
Monochrome
Color
Resolution:
USB 2.0 Ultra-Small Models
STC-MB33USB
STC-MC33USB
STC-MB83USB
STC-MC83USB
STC-MB133USB
STC-MC133USB
STC-MB152USB
STC-MC152USB
STC-MB202USB
STC-MC202USB
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXVGA (1.2 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
Full
1/2 Partial
1/4 Partial
640 (H) x 480 (V)
640 (H) x 224 (V)
640 (H) x 80 (V)
1024 (H) x 768 (V)
1024 (H) x 344 (V)
1024 (H) x 136 (V)
1280 (H) x 960 (V)
1280 (H) x 440 (V)
1280 (H) x 168 (V)
1360 (H) x 1024 (V)
1360 (H) x 476 (V)
1360 (H) x 184 (V)
1600 (H) x 1200 (V)
1600 (H) x 544 (V)
1600 (H) x 208 (V)
Imager Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/3” CCD (ICX445AL)
1/3” CCD (ICX445AQ)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color (Bayer RGB Filter)
Progressive: Monochrome or Color (Bayer RGB Filter)
Maximum Frame Rates:
Full Scan
1/2 Partial
1/4 Partial
Pixel Clock Frequencies:
Trigger Mode:
Scanning Methods:
60 fps
120 fps
240 fps
30 fps
60 fps
120 fps
24.5 MHz
29.5 MHz
Gamma:
Lens Mount:
15 fps
30 fps
61 fps
36.8 MHz
Hardware & Software Trigger
(Free-run / Edge preset / Pulse Width / Start & Stop)
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Internal Sync
Internal Sync
Shutter Speed:
Gain:
19 fps
38 fps
77 fps
Hardware & Software Trigger
(Free-run / Edge preset / Pulse Width / Start & Stop)
Sync System:
Minimum Illumination:
22 fps
44 fps
89 fps
Auto / Manual
0.08 Lux @ F1.2, 50 IRE
2.24 Lux @ F1.2, 50 IRE
Auto / Manual
0.5 Lux @ F1.2, 50 IRE
1.5 Lux @ F1.2, 50 IRE
0.18 Lux @ F1.2, 50 IRE
3.23 Lux @ F1.2, 50 IRE
Auto / Manual
0.11 Lux @ F1.2, 50 IRE
1.39 Lux @ F1.2, 50 IRE
Auto / Manual
Manual (Set via Software)
CS mount
0.07 Lux @ F1.2, 50 IRE
3.22 Lux @ F1.2, 50 IRE
Manual (Set via Software)
CS mount
C mount
White Balance:
Color Camera: Auto / Manual / One-Shot (Set via Software)
Color Camera: Auto / Manual / One-Shot (Set via Software)
Video Output:
8bit / 10bit / 12bit
8bit / 10bit / 12bit
USB: mini-B USB connector
IO signal: 6pin connector (HR10A-7R-6PB or equivalent)
USB: mini-B USB connector
IO signal: 6pin connector (HR10A-7R-6PB or equivalent)
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
+5Vdc via USB Connector
+5Vdc via USB Connector
2.1W, < 420mA
2.1W, < 420mA
0° ~ 40°C (32° ~ 104°F)
0° ~ 40°C (32° ~ 104°F)
Connectors:
Shock and Vibration:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
-30° ~ 65°C (-22° ~ 149°F)
-30° ~ 65°C (-22° ~ 149°F)
Cased: 28 (W) x 28 (H) x 37 (D) mm (1.1” x 1.1” x 1.45”)
Cased: 28 (W) x 28 (H) x 37 (D) mm (1.1” x 1.1” x 1.45”)
Approximately 45g (1.59oz)
Approximately 45g (1.59oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
23
USB 2.0 Series
Trigger Models
Signal over USB Connector
Signal over USB or 12 pin Hirose Connector
Sentech’s ‘ASH’ and ‘AH’ USB
2.0 series are designed for
machine vision and extremely
low light applications. The
‘ASH’ and ‘AH’ models feature
software and hardware control
image capture. These cameras
feature machine vision
AH Models
USB signal over the mini
USB 2.0 connector
UXGA 2 MEGAPIXEL
STC-TB202USB-AH
STC-TC202USB-AH
SXGA 1.4 MEGAPIXEL
STC-TB152USB-AH
STC-TC152USB-AH
STC-TB133USB-AH
STC-TC133USB-AH
XGA 0.8 MEGAPIXEL
STC-TB83USB-AH
STC-TC83USB-AH
50
Rear Panel
24
VGA 0.3 MEGAPIXEL
STC-TB33USB-AH
STC-TC33USB-AH
ASH Models
USB signal over the mini USB
and 12 pin Hirose connector
2 MEGAPIXEL
B/W
B/W
Color
Color
B/W
B/W
Color
Color
B/W
Color
Color
SXGA
SXVGA
STC-TB133USB-ASH
STC-TC133USB-ASH
0.8 MEGAPIXEL
B/W
B/W
Color
Color
B/W
Color
Color
www.SentechAmerica.com
CS Mount
41
XGA
STC-TB83USB-ASH
STC-TC83USB-ASH
0.3 MEGAPIXEL
B/W
36 mm
STC-TB152USB-ASH
STC-TC152USB-ASH
1.2 MEGAPIXEL
B/W
UXGA
STC-TB202USB-ASH
STC-TC202USB-ASH
1.4 MEGAPIXEL
SXVGA 1.2 MEGAPIXEL
50 mm
triggering and complete control of the trigger process.
These cameras have both pulse width and edge preset
triggers that can be supplied to the camera via external
hardware or a computer. The extended integration features
of this camera make it ideal for low light applications. The
‘ASH’ models has the USB signal on both the USB connector
and 12 pin Hirose connector; whereas, the ‘AH’ models
output the USB signal over a USB connector.
VGA
STC-TB33USB-ASH
STC-TC33USB-ASH
C Mount
25
Specifications
Monochrome
Color
Resolution:
USB 2.0 Trigger Models
STC-TB33USB-AH or ASH
STC-TC33USB-AH or ASH
STC-TB83USB-AH or ASH
STC-TC83USB-AH or ASH
STC-TB133USB-AH or ASH
STC-TC133USB-AH or ASH
STC-TB152USB-AH or ASH
STC-TC152USB-AH or ASH
STC-TB202USB-AH or ASH
STC-TC202USB-AH or ASH
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXVGA (1.2 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
Full
1/2 Partial
1/4 Partial
640 (H) x 480 (V)
640 (H) x 224 (V)
640 (H) x 80 (V)
1024 (H) x 768 (V)
1024 (H) x 344 (V)
1024 (H) x 136 (V)
1280 (H) x 960 (V)
1280 (H) x 440 (V)
1280 (H) x 168 (V)
1360 (H) x 1024 (V)
1360 (H) x 472 (V)
1360 (H) x 176 (V)
1600 (H) x 1200 (V)
1600 (H) x 544 (V)
1600 (H) x 208 (V)
Imager Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/3” CCD (ICX445AL)
1/3” CCD (ICX445AQ)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color
Progressive: Monochrome or Color
Maximum Frame Rates:
Full Scan
1/2 Partial
1/4 Partial
Pixel Clock Frequencies:
Trigger Mode:
Trigger Controls:
60 fps
120 fps
240 fps
30 fps
60 fps
120 fps
24.5 MHz
29.5 MHz
22 fps
44 fps
89 fps
19 fps
38 fps
77 fps
15 fps
30 fps
60 fps
36.8 MHz
Hardware & Software Trigger
(Free-run / Edge preset / Pulse Width / Start & Stop)
Hardware & Software Trigger
(Free-run / Edge preset / Pulse Width / Start & Stop)
Integration End Signal, Readout Signal Control, HD Trigger Timing Control
Integration End Signal, Readout Signal Control, HD Trigger Timing Control
I/O Ports:
4 Programmable Input / Output Ports (2 input Ports & 2 Output Ports)
4 Programmable Input / Output Ports (2 input Ports & 2 Output Ports)
Scanning Methods:
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Sync System:
Internal Sync
Internal Sync
Shutter Speed:
Auto / Manual
Auto / Manual
Minimum Illumination:
Extended Low Light:
Gain:
Gamma:
Lens Mount:
0.08 Lux @ F1.2, 50 IRE
2.24 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
5.28 Lux @ F1.2, 50 IRE
0.18 Lux @ F1.2, 50 IRE
3.94 Lux @ F1.2, 50 IRE
0.12 Lux @ F1.2, 50 IRE
2.7 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
1.39 Lux @ F1.2, 50 IRE
Extended Low Light Capability via Software Trigger
Extended Low Light Capability via Software Trigger
Auto / Manual (Analog and Digital Gains set independently via Software)
Auto / Manual (Analog and Digital Gains set independently via Software)
Manual (Set via Software)
CS Mount / Micro Lens Mount
Manual (Set via Software)
CS Mount / Micro Lens Mount
C-Mount
White Balance:
Color Camera: Auto / Manual / One-Shot (Set via Software)
Video Output:
USB 2.0 High Speed
USB 2.0 High Speed
Mini USB (Lock Down Type Available) & USB Signal on the 12 pin Hirose
Mini USB (Lock Down Type Available) & USB Signal on the 12 pin Hirose
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
Connectors:
Shock and Vibration:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
Color Camera: Auto / Manual / One-Shot (Set via Software)
+5Vdc via USB port or 12 Pin Connector
1.75W, < 350mA
1.65W, < 320mA
+5Vdc via USB port or 12 Pin Connector
2.15W, < 430mA
2.25W, < 450mA
0° ~ 40°C (32° ~ 104°F)
0° ~ 40°C (32° ~ 104°F)
-30° ~ 65°C (-22° ~ 149°F)
-30° ~ 65°C (-22° ~ 149°F)
50 (W) x 50 (H) x 35.8 (D) mm (2” x 2” x 1.4”)
50 (W) x 50 (H) x 35.8 (D) mm (2” x 2” x 1.4”)
Approximately 112g (3.95oz)
Approximately 112g (3.95oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
2.50W, < 500mA
27
USB 2.0 Series
Standard Models
Cased
Board
Sentech’s Standard USB
2.0 cameras are available
with progressive scan
color or monochrome
CCDs. The feature rich
Camera Control Software
includes image capture,
Cased
Models
Top
Connector
44.3
UXGA 2 MEGAPIXEL
STC-TB202USB-A
STC-TC202USB-A
SXVGA
51 mm
Rear
Connector
XGA 0.8 MEGAPIXEL
STC-TB83USB-A
STC-TC83USB-A
VGA 0.3 MEGAPIXEL
51
28
B/W
B/W
Color
Color
B/W
Color
Color
STC-TB33USB-A
STC-TC33USB-A
B/W
Color
Color
UXGA
SXGA
STC-TB152USB-B
STC-TC152USB-B
1.2 MEGAPIXEL
B/W
Without Lens
Mount
STC-TB202USB-B
STC-TC202USB-B
1.4 MEGAPIXEL
B/W
1.2 MEGAPIXEL
STC-TB133USB-A
STC-TC133USB-A
Board
Models
2 MEGAPIXEL
SXGA 1.4 MEGAPIXEL
STC-TB152USB-A
STC-TC152USB-A
digital zoom and a user
based menu with simple
and advanced menus.
This series is available
in a cased or board
configuration with a top or
rear USB connector.
B/W
B/W
Color
B/W
Color
Color
www.SentechAmerica.com
Rear
Connector
SXVGA
STC-TB83USB-B
STC-TC83USB-B
0.3 MEGAPIXEL
B/W
Micro Lens Mount
STC-TB133USB-B
STC-TC133USB-B
0.8 MEGAPIXEL
Color
CS Mount
STC-TB33USB-B
STC-TC33USB-B
XGA
45 mm
Top
Connector
VGA
45
29
Specifications
Monochrome
Color
Resolution:
USB 2.0 Standard Models
STC-TB33USB-A or B
STC-TC33USB-A or B
STC-TB83USB-A or B
STC-TC83USB-A or B
STC-TB133USB-A or B
STC-TC133USB-A or B
STC-TB152USB-A or B
STC-TC152USB-A or B
STC-TB202USB-A or B
STC-TC202USB-A or B
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXVGA (1.2 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
Full
1/2 Partial
1/4 Partial
640 (H) x 480 (V)
640 (H) x 224 (V)
640 (H) x 80 (V)
1024 (H) x 768 (V)
1024 (H) x 344 (V)
1024 (H) x 136 (V)
1280 (H) x 960 (V)
1280 (H) x 440 (V)
1280 (H) x 168 (V)
1360 (H) x 1024 (V)
1360 (H) x 472 (V)
1360 (H) x 176 (V)
1600 (H) x 1200 (V)
1600 (H) x 544 (V)
1600 (H) x 208 (V)
Imager Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/3” CCD (ICX445AL)
1/3” CCD (ICX445AQ)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color
Progressive: Monochrome or Color
Maximum Frame Rates:
Full Scan
1/2 Partial
1/4 Partial
Pixel Clock Frequencies:
Trigger Mode:
Trigger Controls:
Scanning Methods:
60 fps
120 fps
240 fps
30 fps
60 fps
120 fps
24.5 MHz
29.5 MHz
22 fps
44 fps
89 fps
19 fps
38 fps
77 fps
36.8 MHz
Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop)
Software Trigger (Free-run / Edge preset / Pulse Width / Start & Stop)
Integration End Signal, Readout Signal Control, HD Trigger Timing Control
Integration End Signal, Readout Signal Control, HD Trigger Timing Control
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Full Progressive, Partial (1/1, 1/2, 1/4), Variable, Binning (B/W models)
Sync System:
Internal Sync
Internal Sync
Shutter Speed:
Auto / Manual
Auto / Manual
Minimum Illumination:
Extended Low Light:
Gain:
Gamma:
Lens Mount:
15 fps
30 fps
60 fps
0.08 Lux @ F1.2, 50 IRE
2.24 Lux @ F1.2, 50 IRE
0.5 Lux @ F1.2, 50 IRE
1.5 Lux @ F1.2, 50 IRE
0.18 Lux @ F1.2, 50 IRE
3.23 Lux @ F1.2, 50 IRE
0.07 Lux @ F1.2, 50 IRE
3.22 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
1.39 Lux @ F1.2, 50 IRE
Extended Low Light Capability via Software Trigger
Extended Low Light Capability via Software Trigger
Auto / Manual (Analog and Digital Gains set independently via Software)
Auto / Manual (Analog and Digital Gains set independently via Software)
Manual (Set via Software)
Manual (Set via Software)
CS Mount / Micro Lens Mount
CS Mount / Micro Lens Mount
C-Mount
White Balance:
Color Camera: Auto / Manual / One-Shot (Set via Software)
Color Camera: Auto / Manual / One-Shot (Set via Software)
Video Output:
USB 2.0 High Speed
USB 2.0 High Speed
Standard USB (Lock Down Type Available) “B” Style
Standard USB (Lock Down Type Available) “B” Style
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
Vibration: 10G (20 to 200Hz), Shock: 70G (3 directions, 3 times each)
+5Vdc via USB Connector
+5Vdc via USB Connector
Connectors:
Shock and Vibration:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
1.75W, < 350mA
1.60W, < 320mA
0° ~ 40°C (32° ~ 104°F)
2.5W, < 500mA
2.25W, < 450mA
2.80W, < 560mA
0° ~ 40°C (32° ~ 104°F)
-30° ~ 65°C (-22° ~ 149°F)
-30° ~ 65°C (-22° ~ 149°F)
Cased: 51 (W) x 51 (H) x 44.3 (D) mm (2” x 2” x 1.74”)
Board: 45 (W) x 45 (W) x Var. (1.77” x 1.77” x Var.)
Cased: 51 (W) x 51 (H) x 43.3 (D) mm (2” x 2” x 1.70”)
Board: 45 (W) x 45 (W) x Var. (1.77” x 1.77” x Var.)
Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz)
Cased: Approximately 145g (5.11oz), Board Approximately: 45g (1.58oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
31
Micro
CMOS USB
Specifications
USB 2.0 Model
Specification
Micro CMOS USB
The brand new Micro CMOS USB 2.0 camera
is ideal for facial recognition applications in
gaming machines, ATMs, and kiosks. Boasting
a minimal 32 (W) x 28 (H) x 26.15 (D) mm
size, the STC-MC36 is the smallest model in our
USB camera line. The STC-MC36 is capable of
outputting 30 fps and is equipped with a 1/6”
VGA Color CMOS Sensor. With an extremely low
cost, the STC-MC36 is one of Sentech’s easiest to
use, and affordable cameras.
Color
Resolution:
Imager Sensor:
Active Resolution:
STC-MC36USB
VGA (0.3 Megapixel)
1/6” VGA Color CMOS (PAS6311LT (PixArt)
640 (H) x 480 (V)
Pixel Size:
3.6 (H) x 3.6 (V) μm
Scanning System:
Progressive: Color
Frame Rate:
Up to 30fps
Sync System:
Internal
Video Output:
Lens:
Field of View:
Adjustable Properties:
Diagonally: 68⁰ , Horizontally: 55⁰ , Vertically 42⁰
Software Adjustable
Brightness (1 to 255)
Contrast (1 to 200)
Gamma (1 to 100)
Color Saturation (1 to 200)
Hue (-180 to 180)
Sharpness (1 to 10)
White Balance: Auto (2800K to 6500K)
- Input Voltage
5 V via USB Port
- Consumption
< 0.5 W
Storage Temperature:
Dimensions:
Weight:
Color
STC-MC36USB
VGA
32 mm
f = 2.3 mm, F2.0 (Pint position: 30 to 70cm)
Power:
Operating Temperature:
New! Low Cost!
Micro CMOS USB
Model
0.3 MEGAPIXEL
USB 2.0 and 1.1 Compliant
USB Video Class 1.1 Compliant
Simulated Size
-5⁰ ~ 50⁰C (23° ~ 122°F)
-20⁰C ~ 80⁰C (-4° ~ 176°F)
Key Features
•
•
•
•
•
Plug and play
28
Low Cost
M12 Lens Mount
Integral Mounting Brackets
1/6” CMOS Sensor
26.15
Bottom View
32 (W) x 28 (H) x 26.15 (D) mm (1.25” x 1.1” x 1.03”)
(including the lens)
Approximately 13g (0.46oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
33
GigE Vision® Series
SEN TECH
GigE Vision® Overview
90fps
39fps
36fps
19fps
15fps
Frame Rate
5 MP
2 MP
1.4 MP
1.2 MP
0.3 MP
Resolution
2/3”
1/1.8”
1/3”
Sensor
0.8 MP
Models
1/2”
Standard
Standard
STC-GE/GEC33A
STC-GE/GEC83A
STC-GE/GEC133A
STC-GE/GEC152A
Power Plus
Key Features
• Accurate CCD Alignment with Precision Housing
• VGA ~ QSXGA Resolutions (High Speed Frame Rates)
• Color (RGB Bayer Filter) or Monochrome
• Gamma Table (Importing)
• Area of Interest (AOI) - User Programmable
• Low Light Extended Integration
• Smear Reduction Functions
• DC Auto Iris Lens Connector
Power Plus (specific)
• Separate User Programmable Xilinx FPGA
• 32MB User Memory
• 8 Opto-Isolated Configurable I/Os
34
www.SentechAmerica.com
STC-GE/GEC202A
STC-GE/GEC500A
Power Plus
STC-GE/GEC33OX
STC-GE/GEC83OX
STC-GE/GEC152OX
STC-GE/GEC202OX
Accessories
Cables
12W-2P / 02 / 03 / 05
Lenses
Various C-Mount Lenses
Various Megapixel Lenses
Various Telecentric Lenses
Lens Mount
C-Adapter
Network Card
Intel Pro 1000
35
GigE Vision® Series
Standard Models
Cased
Sentech’s Standard GigE
camera is GigE Vision® and
GenICam™ compliant. The
camera is available in
color or monochrome
and comes in resolutions
Standard
Models
5 MEGAPIXEL
QSXGASTC-GE500A
B/W
STC-GEC500A
35 mm
UXGA
SXGA
35
50.6
Standard Camera Block Diagram
CCD
CDS / AD
Color
Sentech
FPGA
Gigabit
Ethernet
2 MEGAPIXEL
STC-GE202A
STC-GEC202A
GigE
Interface
B/W
Color
Image Data
Control
1.4 MEGAPIXEL
STC-GE152A
STC-GEC152A
B/W
Color
1.2 MEGAPIXEL
SXVGA STC-GE133A
B/W
STC-GEC133A
XGA
Color
0.8 MEGAPIXEL
STC-GE83A
STC-GEC83A
VGA 0.3 MEGAPIXEL
STC-GE33A
36
ranging from 5MP to 0.3MP with 15 ~ 90
fps respectively. It features communication
over the Ethernet connector, and it has a
DC Iris lens connector. Each unit includes
the Sentech GigE Vision Software, SDK and
DirectX driver.
STC-GEC33A
B/W
Color
B/W
Color
www.SentechAmerica.com
PoE Available
All models are also
available in Power Over
Ethernet. This camera
meets all industry
standards for GigE
Vision® and GenICam™.
37
Specifications
Monochrome
Color
Resolution:
Image Sensor:
STC-GE33A
STC-GEC33A
STC-GE83A
STC-GEC83A
STC-GE133A
STC-GEC133A
STC-GE152A
STC-GEC152A
STC-GE202A
STC-GEC202A
STC-GE500A
STC-GEC500A
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXVGA (1.2 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
QSXGA (5 Megapixel)
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/3” CCD (ICX445AL)
1/3” CCD (ICX205AQ)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
2/3” CCD (ICX625AL)
2/3” CCD (ICX625AQ)
Signal Format:
Frame Rate:
Active Picture Element:
Vertical Frequency:
Horizontal Frequency:
GigE Standard Models
Progressive: Monochrome or Color
Progressive: Monochrome or Color
90fps
36fps
39fps
19fps
648 (H) x 494 (V)
1024 (H) x 768 (V)
1280 (H) x 966 (V)
1360 (H) x 1040 (V)
1624 (H) x 1236 (V)
2448 (H) x 2058 (V)
89.91 Hz
36.42 Hz
39.82 Hz
19.26 Hz
15.32 Hz
15.18 Hz
39.4247 kHz
20.5688 kHz
47.2028 kHz
28.9907 kHz
Pixel Clock Frequencies:
36.8181 MHz
15fps
19.1761 kHz
65.453333 MHz
81.8182 MHz
Sync System:
Internal
Internal
Video Output:
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
IEEE802.3 (1000BASE-T)
IEEE802.3 (1000BASE-T)
Interface:
Protocol:
GenICam™ 2.0 and GigE Vision® 1.2 compliant
GenICam™ 2.0 and GigE Vision® 1.2 compliant
ALC:
Auto iris lens, electronic iris and AGC (ON/OFF)
Auto iris lens, electronic iris and AGC (ON/OFF)
UART Communication through Ethernet Port
UART Communication through Ethernet Port
Communication:
Trigger Mode:
Minimum Illumination:
Gain:
S/N Ratio:
Gamma:
Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)
0.58 Lux @ F1.2
25.75 Lux @ F1.2
0.95 Lux @ F1.2
24.70 Lux @ F1.2
Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)
0.25 Lux @ F1.2
11.80 Lux @ F1.2
0 to 20.4 dB
8bit ≤ 3 Digit (Gain 0dB);
10bit ≤ 12 Digit (Gain 0dB);
12bit ≤ 48 Digit (Gain 0dB)
0.41 Lux @ F1.2
15.49 Lux @ F1.2
0.16 Lux @ F1.2
7.27 Lux @ F1.2
8bit ≤ 3 Digit (Gain 0dB);
10bit ≤ 12 Digit (Gain 0dB);
12bit ≤ 48 Digit (Gain 0dB)
Gamma 1.0 (Factory default) or uploadable gamma table
Programmable AOI setting via the communication
Programmable AOI setting via the communication
Smear Reduction:
ON/OFF selectable via communication
ON/OFF selectable via communication
Color Interpolation:
Color Camera: Available on RGB output
Color Camera: Available on RGB output
Color Camera: Auto, manual and push-to-set white balance
(is available on both Raw data output and RGB output)
Color Camera: Auto, manual and push-to-set white balance
(is available on both Raw data output and RGB output)
DC IRIS control input with video level target, peak/average
and zone weight settings via the communication
DC IRIS control input with video level target, peak/average
and zone weight settings via the communication
White Balance:
DC Iris Lens Control:
Lens Mount:
C-Mount
C-Mount
Optical Filter:
No IR Cut Filter (IR Cut Filter)
No IR Cut Filter (IR Cut Filter)
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
38G (3 directions, 3 times each)
38G (3 directions, 3 times each)
10G (20 to 200Hz)
10G (20 to 200Hz)
Optical Center Accuracy:
Shock:
Vibration:
Input Voltage:
Dimensions (mm):
10.8 to 26.4Vdc
10.8 to 26.4Vdc
35 (W) x 35 (H) x 50.6 (D)
(1.37” x 1.37” x 1.99”)
35 (W) x 35 (H) x 50.6 (D)
(1.37” x 1.37” x 1.99”)
www.SentechAmerica.com
0.10 Lux @ F1.2
6.48 Lux @ F1.2
0 to 20.4 dB
8bit ≤ 4 Digit (Gain 0dB);
10bit ≤ 15 Digit (Gain 0dB);
12bit ≤ 60 Digit (Gain 0dB)
Gamma 1.0 (Factory default) or uploadable gamma table
AOI Function:
31.1284 kHz
36.8181 MHz
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
8bit ≤ 14 Digit (Gain 0dB);
10bit ≤ 15 Digit (Gain 0dB);
12bit ≤ 60 Digit (Gain 0dB)
39
GigE Vision® Series
Power Plus Models
Xilinx FPGA
Sentech’s Power Plus GigE
camera is GigE Vision®
and GenICam™ compliant.
This camera features
a user programmable
FPGA, a 32MB DDR2
memory and eight user-
Power Plus
Models
UXGA 2 MEGAPIXEL
40 mm
STC-GE202OX
STC-GEC202OX
40
45.8 mm
XGA
Power Plus Camera Block Diagram
CCD
CDS/AD
Sentech
FPGA
Power/IO
Connector
B/W
Configuration
ROM (8Mbit)
Color
User’s
FPGA
(XILINX)
DDR2
Memory
(32M)
JTAG
Connector
B/W
Color
Image Data
Configuration
JTAG
IO
UART
SPI BUS
EEPROM
(512Kbit)
VGA 0.3 MEGAPIXEL
STC-GE33OX
STC-GEC33OX
Gigabit
Ethernet
Port
Color
0.8 MEGAPIXEL
STC-GE83OX
STC-GEC83OX
40
GigE
Interface
B/W
SXGA 1.4 MEGAPIXEL
STC-GE152OX
STC-GEC152OX
configurable I/Os. This allows the user to
program their proprietary code and have
complete control over the DDR2 memory
and FPGA, allowing faster downstream
system processing. The camera is available
in color or monochrome and comes in four
resolutions from 2 MP to 0.3MP.
25MHz
Xilinx
Option Board
B/W
Color
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
41
Specifications
Monochrome
Color
Resolution:
Image Sensor:
STC-GE33OX
STC-GEC33OX
STC-GE83OX
STC-GEC83OX
STC-GE152OX
STC-GEC152OX
STC-GE202OX
STC-GEC202OX
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Frame Rate:
Active Picture Element:
Vertical Frequency:
Horizontal Frequency:
GigE Power Plus Models
Progressive: Monochrome or Color
Progressive: Monochrome or Color
90fps
36fps
19fps
15fps
648 (H) x 494 (V)
1024 (H) x 768 (V)
1360 (H) x 1040 (V)
1624 (H) x 1236 (V)
89.91 Hz
36.42 Hz
19.26 Hz
15.32 Hz
28.9907 kHz
20.5688 kHz
47.2028 kHz
Pixel Clock Frequency:
19.1761 kHz
36.8181 MHz
36.8181 MHz
Sync System:
Internal
Internal
Video Output:
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
Interface:
PoE: IEEE802.3af CLASS3(1000BASE-T)
PoE: IEEE802.3af CLASS3(1000BASE-T)
Protocol:
GenICam™ 2.0 and GigE Vision® 1.2 compliant
GenICam™ 2.0 and GigE Vision® 1.2 compliant
ALC:
Auto iris lens, electronic iris and AGC (ON/OFF)
Auto iris lens, electronic iris and AGC (ON/OFF)
Communication:
Trigger Mode:
Minimum Illumination:
Gain:
S/N Ratio:
UART Communication through Ethernet Port
UART Communication through Ethernet Port
Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)
Edge Preset Trigger / Pulse Width Trigger (Unlimited extended exposure)
0.58 Lux @ F1.2
25.75 Lux @ F1.2
0.96 Lux @ F1.2
24.70 Lux @ F1.2
0.41 Lux @ F1.2
15.49 Lux @ F1.2
0.16 Lux @ F1.2
7.27 Lux @ F1.2
0 to 20.4 dB
0 to 20.4 dB
8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB)
8bit ≤ 3 Digit (Gain 0dB); 10bit ≤ 12 Digit (Gain 0dB); 12bit ≤ 48 Digit (Gain 0dB)
Gamma:
1.0 (Factory default) or Downloadable gamma table
1.0 (Factory default) or Downloadable gamma table
AOI Function:
Programmable AOI setting via the communication
Programmable AOI setting via the communication
Selectable ON/OFF via the communication
Selectable ON/OFF via the communication
Smear Reduction:
Color Interpolation:
White Balance:
DC Iris Lens Control:
User Configurable Board:
Color Camera: Available on RGB output
Color Camera: Available on RGB output
Color Camera: Auto, manual and push-to-set white balance
(available on both Raw data output and RGB output)
Color Camera: Auto, manual and push-to-set white balance
(available on both Raw data output and RGB output)
Auto iris lens connector, DC drive type
Auto iris lens connector, DC drive type
FPGA: XILINX FPGA (XC3SD1800A, CSG484 package), 1800K gates
DDR2: W9725G6JB-25 (Winbond), 32MB
EEPROM: M95512-RMN6TP (ST Micro), 512KB
Configuration ROM: M25P80-VMP6G (ST Micro), 8MB
FPGA: XILINX FPGA (XC3SD1800A, CSG484 package), 1800K gates
DDR2: W9725G6JB-25 (Winbond), 32MB
EEPROM: M95512-RMN6TP (ST Micro), 512KB
Configuration ROM: M25P80-VMP6G (ST Micro), 8MB
Lens Mount:
C-Mount
C-Mount
Optical Filter:
No IR Cut Filter (IR Cut Filter)
No IR Cut Filter (IR Cut Filter)
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
Positional Accuracy in H and V directions: +/- 0.3mm
Rotational Accuracy of H and V: +/- 1.5 deg.
70G (3 directions, 3 times each)
70G (3 directions, 3 times each)
10G (20 to 200Hz)
10G (20 to 200Hz)
+10.8 ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet
+10.8 ~ 26.4Vdc via Power/IO Connector or Power Over Ethernet
50 (W) x 50 (H) x 53.4 (D) mm
(1.96” x 1.96” x 2.10”)
50 (W) x 50 (H) x 53.4 (D) mm
(1.96” x 1.96” x 2.10”)
Optical Center Accuracy:
Shock:
Vibration:
Input Voltage:
Dimensions:
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
43
Auto Focus Series
SEN TECH
HD CCD
11x
18x
Zoom
22x
Analog
Format
Digital HD
720p
330 TVL
Resolution
480 TVL
Sensor
1/6”
Models
1/4”
Auto Focus Block Overview
HD CMOS Sensor
STC-AF134DV
HD CCD Sensor
Analog CCD
STC-AF133A
New! HD CMOS
CCD Sensor
STC-AF66A
STC-AF66B
Key Features
11x,18x and 22x
• Powerful
Optical Zoom Capabilities
Series: CCD HD720p, CMOS HD720p,
• 4480
TVL, 330 TVL
• RS232 Serial Communication
• Low Light Extended Integration
• Direct Connection to TFT Computer Type Monitors
• Manual Focus Override
• AF Stability (Reduces Hunting During Target Movement)
• On Board Low Vision Features
• Optional 25mm Close-up Lens
44
www.SentechAmerica.com
STC-AF56A
STC-AF56B
Accessories
Cables
CAB-HDMI-MINI-2
CAB-HDMI-MINI-3
Programming Jig
JIG-RS232AF
Lenses
250mm Close-up Lens HD & SD
45
Auto Focus Series
High Definition Models
HD CMOS Sensor
HD CCD Sensor
Sentech’s newest
addition to the
Auto Focus Block
Camera line.
HD CMOS
Model
New!
The STC-AF134DV
is a low cost, high
performance CMOS
Auto Focus camera
which outputs
both DVI and LVDS
signals. The DVI
signal can go directly
to any flat screen
monitor that takes a
DVI or HDMI input.
The STC-AF134DV
auto focus block
camera outputs
a 720p, 60 fps,
16x9 image. The
camera provides full
“on-board” image
processing for Low
Vision Magnifier
systems.
46
720p, 60fps HD
STC-AF134DV
11x Zoom
55.5 mm
The STC-AF133A Auto Focus is ideal
for Low Vision Systems, industrial
and medical applications. This
CCD based camera outputs a
720p, 16x9 image at 60fps and
has complete ‘on-camera’ low
vision processing. This product
features an 18x optical
zoom lens along with userprogrammable digital zoom.
HD CCD
Model
HD
720p, 60fps
18x Zoom
STC-AF133A
64 mm
48.5
60
89.3 mm
76
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
47
Auto Focus Series
Analog Models
High Resolution
Standard Resolution
The STC-AF66 Auto Focus block camera features
a high resolution CCD, complete ‘on-camera’
low vision processing and multiple outputs
including VGA RGB. With the optional
dual-element close up lens, this
camera can auto focus through
the entire zoom range at a
target only 25cm away from
the camera.
High
Resolution
Models
NTSC
STC-AF66A
STC-AF66B
48
Standard
Resolution
Models
NTSC
w/o Close-up Lens
w/o Close-up Lens
w/ Close-up Lens
w/ Close-up Lens
Features
•
•
•
•
•
•
•
•
•
The STC-AF56 has the entirely same low vision
magnifier system features and ‘on-camera’ processing
as the STC-AF66 camera. The STC-AF56 has a standard
resolution CCD (510 x 494). This camera also
has an optional dual-element close up
lens, which allows the camera to
auto focus through the entire
zoom range at a target only
25cm away.
STC-AF56A
STC-AF56B
58.2 mm
87.1
Full Optical Zoom 22x (47x magnification on 17” monitor)
Direct connection to TFT Computer or Video Monitors
Auto Focus Stability (Reduces hunting during target movement)
Auto Focus Tracking (When object height changes)
Manual Focus Override
52.7
Normal, High Contrast & Super Contrast Modes
AF56B and AF66B models
30 Combinations of Pseudo Colors
Normal / Mirror Image Selectable
RS232 Communication for Camera Control
www.SentechAmerica.com
49
Specifications
Standard Lens
Close-up Lens
STC-AF134DV
Resolution:
Image Sensor:
STC-AF133A
STC-AF66A
STC-AF66B
480 TV lines
330 TV Lines
1/3” SXGA CCD (ICX445AQA)
1/6” CCD (ICX238AKE)
1/6” CCD (ICX296AKA)
768 (H) x 494 (V)
512 (H) x 492 (V)
HD 720p
1/4” SXGA CMOS (IMX076)
Active Picture Element:
1280 (H) x 720 (V)
Scanning System:
Scanning Frequency:
Auto Focus Block Models
Color Progressive
STC-AF56A
STC-AF56B
Interlaced / Non-Interlaced
60 Hz and 50 Hz (switchable)
60 Hz
50dB (AGC On)
>48dB (AGC Off)
S/N Ratio:
Minimum Illumination:
13 Lux @ F1.6
8 Lux @ F1.6
0.5 Lux @ F1.6
Sync System:
Internal
Internal / External
Video Output:
DVI 1.0 conformity (RGB, 1280 (H) x 720 (V), 60 Hz / 50 Hz)
NTSC Composite, Y/C, RGB Interlace, RGB progressive out for PC monitors (VGA compatible)
Shutter Speed:
Selectable shutter speeds via the serial communication
Selectable shutter speeds via the serial communication
Gain:
Adjustable via the serial communication
Adjustable gain via serial communication or AGC (On/Off)
Gamma:
Adjustable via the serial communication
Adjustable via the serial communication
Auto white balance
Manual white balance
Push-to-set white balance
Selectable auto or fixed white balance via serial communication
Auto: The range is 2800K to 7000K
Fixed: 3 positions (3200K, 4100K and 5100K)
Normal, High Contrast & Super High Contrast Mode
High Contrast Mode Includes: Negative/Positive (Selectable)
30 Pre-Programmed Pseudo Colors Combinations (user definable)
Normal, High Contrast & Super High Contrast Mode
High Contrast Mode Includes: Negative/Positive (Selectable)
30 Pre-Programmed Pseudo Colors Combinations (user definable)
Manual zoom position control via serial communication
Zoom position controllable via the serial communication
Auto focus / manual focus / push set focus
Focus mode selectable via the serial communication
Auto iris / manual iris / push-set iris
Selectable iris control mode via the serial communication
Auto / manual focus or auto with manual override
White Balance:
Video Processing:
AF Lens Control:
- Optical Zoom:
- Focus:
- Iris:
Zoom Range:
AF Hunting Control:
Line Generator:
Shadow Mask Generator:
Character Generation:
Mirror Mode:
5.2 ~ 58.8mm
(11x Optical Zoom Range)
14.7 ~ 84.6mm
(18x Optical Zoom Range)
3.9 ~ 85.8mm
(22x Optical Zoom Range)
Selectable ON/OFF via the serial communication
Selectable ON/OFF via the serial communication
Thickness, Color, Position & Orientation (Horizontal and/or Vertical)
via the serial communication
Thickness, Color, Position & Orientation (Horizontal and/or Vertical)
via the serial communication
Darkness, Position & Orientation (Horizontal and/or Vertical)
via the serial communication
Darkness, Position & Orientation (Horizontal and/or Vertical)
via the serial communication
Built-in character generation function via the serial communication
Built-in full screen character generation function via the serial communication
Normal / Horizontal / Vertical / Hor. and Ver. (180° rotated image) mirror image
Selectable via the serial communication
Normal or Mirror Image (Horizontally Reversed) via serial communication
Communication:
UART serial communication
RS232 serial communication
Software Control:
All camera DSP and lens setup parameters are controlled
via the serial communication
All camera DSP and lens setup parameters are controlled
via the serial communication
+12Vdc (8~15Vdc)
+12Vdc (7~15Vdc)
Input Voltage:
Power Consumption:
< 4.5 W, 375mA
< 5.2W, 433mA
3 W, 250mA
Temperature:
Operational: 0° ~ 45°C ( 32° ~ 113°F);
Storage: -30° ~ 65°C ( -22° ~ 149°F)
Operational: 0° ~ 45°C ( 32° ~ 113°F);
Storage: -30° ~ 65°C ( -22° ~ 149°F)
Operational: -5° ~ 45°C ( 14° ~ 113°F)
Storage: -30° ~ 65°C ( -22° ~ 149°F)
Dimensions:
55.5 (W) x 48.5 (H) x 76 (D) mm
64 (W) x 60 (H) x 89.3 (D) mm
58.2 (W) x 52.7 (H) x 80 (D) mm / 58.2 (W) x 52.7 (H) x 87.1 (D) mm
Weight:
150g (5.29oz)
227g (8.00oz)
www.SentechAmerica.com
165g (5.82oz) / 185g (6.52oz)
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
51
Camera Link® Series
SEN TECH
New! High Speed
CMOS Sensor
Camera Link® Overview
180+
60, 90
30
16
15, 19
Frame Rate
5 MP
4 MP
2 MP
1.4 MP
0.3 MP
Resolution
1”
2/3”
1/1.8”
1/2”
Sensor
0.8 MP
Models
1/3”
High Speed
CCD Sensor
CMOS
STC-CMB\CMC2MCL
STC-CMB\CMC4MCL
CCD
STC-CL\CLC33A
STC-RCL\RCLC33A
STC-CL\CLC83A
STC-CL\CLC152A
STC-CL\CLC202A
New! High Speed
Kodak Sensor
STC-CL\CLC232A
Cube
CCD Sensor
Kodak CCD
STC-CL\CLC338A
Key Features
Imager Alignment with
• Accurate
Compact Precision Housing
• VGA ~ QSXGA Resolutions
• Color (RGB Bayer Filter) and Monochrome
• High Frame Rates (Ideal for High Speed Image Capture)
Modes (With Reset & Non-Reset)
• Trigger
- Pulse Width and Edge Preset
• Multiple Trigger Channels (CL Cable or Hirose Connector)
52
STC-CL\CLC500A
www.SentechAmerica.com
Accessories
Cables (Standard to Mini)
CAB-CL2M-MINI
CAB-CL3M-MINI
CAB-CL5M-MINI
CAB-CL7M-MINI
CAB-CL10M-MINI
Cables (Mini to Mini)
CAB-CL2M-M2M
CAB-CL3M-M2M
CAB-CL5M-M2M
CAB-CL10M-M2M
Lenses
Various C-Mount Lenses
Various Megapixel Lenses
Various Telecentric Lenses
Remote Head Lenses
LEN-RCL33A-L3
LEN-RCL33A-L6
LEN-RCL33A-L16
LEN-RCL33A-L30
Tripod Mount
TP-HCA
53
Camera Link® Series
High Speed CMOS Sensor
High Speed Kodak Sensor
This family of cameras uses the
C-MOSIS 2MP and 4MP CMOS
sensors. The 2MP sensors
output full resolution at 340
fps and the 4MP sensors output
full resolution at 180 fps. These
cameras are available in color
or monochrome. The camera
has a small package of
1.97” x 1.97” x 1.65”.
New!
High speed CMOS
Camera Link®
Cameras.
• Global Shutter
• Wide Dynamic Range
CMOS Sensor
Models
180fps
4 MEGAPIXEL
STC-CMB4MCL
STC-CMC4MCL
340fps
0.3 MEGAPIXEL
B/W
B/W
Color
Color
New!
240fps
High speed
Kodak VGA
Camera Link®
Cameras.
STC-CL338A
STC-CLC338A
B/W
Color
40.5
48.2mm
35
35
50
54
Kodak CCD
Models
2 MEGAPIXEL
STC-CMB2MCL
STC-CMC2MCL
50 mm
The STC-CL338A is a high-speed VGA CCD
Camera Link camera. This camera utilizes
a Kodak CCD image sensor. In addition
to the standard quality and reliability
of all of Sentech’s Camera Link
cameras, this cameras output at full
resolution is 240fps frame rate. The
camera is available in either color
or monochrome. Its small size adds
to the cameras versatility.
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
55
Specifications
CMOS Sensor
Monochrome
Color
Resolution:
Image Sensor:
STC-CMB2MCL
STC-CMC2MCL
Active Picture Element:
Chip Size (mm):
Cell Size (µm):
STC-CL338A
STC-CLC338A
2 Megapixel
4 Megapixel
VGA (0.3 Megapixel)
2/3” CMOS (CMOSIS: CMV2000)
1” CMOS (CMOSIS: CMV4000)
1/3” CCD (KAI-0340S (Kodak))
1/3” CCD (KAI-0340DCM (Kodak))
Signal Format:
Frame Rate:
STC-CMB4MCL
STC-CMC4MCL
Kodak Sensor
Progressive
Progressive: Monochrome or Color
340fps
180fps
240fps
2048 (H) x 1088 (V)
2048 (H) x 2048 (V)
644 (H) x 484 (V)
11.264 (H) x 5.984 (V)
5.87 (H) x 4.71 (V)
5.5 (H) x 5.5 (V)
7.4 (H) x 7.4 (V)
8-bit 10TAP: 340Hz
10-bit MEDIUM: 150Hz
240.9 Hz
Horizontal Frequency:
8-bit 10TAP: 372 kHz / 10-bit MEDIUM: 164 kHz
119.1 kHz
Pixel Clock Frequency:
8-bit 10TAP: 48 MHz / 10-bit MEDIUM: 21.25 MHz
48 MHz
Full Scan / Partial (1/2, 1/4, Variable), Binning w/ monochrome models
Full Scan / Partial (1/2, 1/4, Variable), Binning w/ monochrome models
Vertical Frequency:
Scanning Method:
Sync System:
Internal
Internal
RS232 via Camera Link® connector
RS232 via Camera Link® connector
Trigger Mode:
Edge preset trigger (V-reset, Non-reset)
Pulse width trigger (V-reset, Non-reset)
Pulse Width Trigger (V Reset, Non Reset)
Edge Preset Trigger (V Reset, Non Reset)
Shutter Speed:
OFF, 45 seconds to 1/372,093 seconds (Variable at line)
OFF, 1/8 ~ 1/60,000
Quantum Efficiency: 62% at 500 nm.
3.5 Lux @ F1.2, 50 IRE
4.0 Lux @ F1.2, 50 IRE
1x to 4x
Fixed Gain: Adjustable (0 ~ 27 dB)
≤ 3 Digit (Gain 0dB)
8 bit ≤ 4 Digit (Gain 0dB)
10 bit ≤ 15 Digit (Gain 0dB)
12 bit ≤ 60 Digit (Gain 0dB)
Communication:
Minimum Illumination:
Gain:
S/N Ratio:
Gamma:
Lens Mount:
Video Output:
Optical Filter:
Optical Center Accuracy:
Shock:
Vibration:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions (mm):
Weight:
1.0
1.0
C-Mount
C-Mount
Digital 8 or 10 bit Camera Link® (Base Configuration)
Digital 8/10/12 bit Camera Link®, 2 taps
No IR Cut Filter
No IR Cut Filter
Positional accuracy of H and V directions: +/- 0.31mm
Rotational accuracy of H and V: +/- 2.1 deg.
Positional accuracy of H and V directions: +/- 0.31mm
Rotational accuracy of H and V: +/- 2.1 deg.
70G (3 directions, 3 times each)
70G (3 directions, 3 times each)
10G (20 to 200Hz)
10G (20 to 200Hz)
12Vdc ± 10%
12Vdc +/- 10%
< 4.5W, 375mA
< 3.6 W, 300mA
-5° ~ 40°C (23° ~ 104°F)
-5° ~ 40°C (23° ~ 104°F)
-30° ~ 65°C (-22° ~ 140°F)
-30° ~ 65°C (-22° ~ 140°F)
50 (W) x 50 (H) x 40.5 (D) (1.96” x 1.96” x 1.59”)
35 (W) x 35 (H) x 48.2 (D) (1.37” x 1.37” x 1.89”)
140g (4.93 oz)
104g (3.66 oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
57
Camera Link® Series
Standard
Remote Head and PoCL
These are compact, full featured,
digital Camera Link® cube cameras.
The series offers a range of
megapixel resolutions and frame
rates. The CCD sizes include 1/3”,
1/2”, 1/1.8” and 2/3”. All Standard
Camera Link® cameras are
available in color (RGB Primary
Color filter) or monochrome.
Standard
Models
35
30.2 mm
QSXGA 5 MEGAPIXEL
STC-CL500A
STC-CLC500A
500 Models
35
STC-CL232A
STC-CLC232A
STC-CL202A
STC-CLC202A
28
B/W
Color
Color
VGA
STC-RCL33A
STC-RCLC33A
B/W
Color
B/W
Color
SXGA 1.4 MEGAPIXEL
232 Models
28
STC-CL152A
STC-CLC152A
B/W
Color
XGA 0.8 MEGAPIXEL
28
33, 83*, 152, 202 Models
* Also available at 44fps. For more information
inquire about the STC-CL/CLC83A-44.
58
0.3 MEGAPIXEL
B/W
UXGA 2 MEGAPIXEL
29.5
Remote Head
Models
UXGA 2 MEGAPIXEL
28
36.5
These are micro remote
head VGA high speed
machine vision Camera
Link® cameras. This
series features two styles
of remote head which
allows access to very
small or tight spaces.
STC-CL83A
STC-CLC83A
B/W
Color
VGA 0.3 MEGAPIXEL
STC-CL33A
STC-CLC33A
B/W
Rectangular (R3) Head
12 (W) x 12 (H) x 44 (D) mm
Cube (C3) Head
17 (W) x 17 (H) x 10.5(D) mm
PoCL Models
All Standard models are also available
in Power Over Camera Link® format.
Except for the power delivery methods,
the mechanical features and physical
back panels of the PoCL cameras are
the same as the standard models.
Color
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
59
Specifications
Monochrome
Color
Resolution:
Image Sensor:
Signal Format:
Frame Rate:
Camera Link® Models
STC-CL33A
STC-CLC33A
STC-CL83A
STC-CLC83A
STC-CL152A
STC-CLC152A
STC-CL202A
STC-CLC202A
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
QSXGA (5 Megapixel)
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
2/3” CCD (ICX625AL)
2/3” CCD (ICX625AQ)
Progressive: Monochrome or Color
STC-CL232A
STC-CLC232A
STC-CL500A
STC-CLC500A
Progressive: Monochrome or Color
30, 60, 90fps
30fps
15, 19fps
Active Picture Element:
648 (H) x 494 (V)
1024 (H) x 768 (V)
1360 (H) x 1024 (V)
1620 (H) x 1220 (V)
2448 (H) x 2058 (V)
Chip Size (mm):
5.79 (H) x 4.89 (V)
5.80 (H) x 4.92 (V)
7.60 (H) x 6.20 (V)
8.50 (H) x 6.80 (V)
9.93 (H) x 8.70 (V)
7.4 (H) x 7.4 (V)
4.65 (H) x 4.65 (V)
4.65 (H) x 4.65 (V)
4.4 (H) x 4.4 (V)
3.45 (H) x 3.45 (V)
Cell Size (µm):
Vertical Frequency:
16fps
30fps
16fps
31.47 / 62.94 / 94.78 Hz
29.59 Hz
19.3 Hz
15.32 Hz
30.85 Hz
16 Hz
Horizontal Frequency:
47.20 kHz
23.23 kHz
20.57 kHz
19.18 kHz
38.35 kHz
33.26 kHz
Pixel Clock Frequency:
36.82 MHz
29.5 MHz
36.82 MHz
36.82 MHz
73.64 MHz
64 MHz
Scanning Method:
Sync System:
Communication:
Trigger Mode:
Full Scan / Partial (1/2, 1/4, Variable), Binning w/ monochrome models
Internal / External (HD / VD)
Full Scan / Partial (1/2, 1/4, Variable), Binning w/ monochrome models
Internal / External (HD / VD)
RS232 via Camera Link connector
Internal
RS232 via Camera Link connector
Pulse Width Trigger (V Reset, Non Reset)
Edge Preset Trigger (V Reset, Non Reset)
Pulse Width Trigger (V Reset, Non Reset)
Edge Preset Trigger (V Reset, Non Reset)
Shutter Speed:
OFF, 1/3 to 1/40,000 (30fps)
OFF, 1/7 to 1/80,000 (60fps)
OFF, 1/11 to 1/120,000 (94fps)
OFF, 1/5 to 1/96,000
OFF, 1/3 ~ 1/93,000 (15fps)
OFF, 1/5 ~ 1/120,000 (19fps)
OFF, 1/4 ~ 1/120,000
OFF, 1/9 ~ 1/240,000
OFF, 1/8 ~ 1/209,000
Minimum Illumination:
0.12 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.14 Lux @ F1.2, 50 IRE
0.14 Lux @ F1.2 , 50 IRE
0.12 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.06 Lux @ F1.2, 50 IRE
0.08 Lux @ F1.2, 50 IRE
0.7 Lux @ F1.2, 50 IRE
0.92 Lux @ F1.2, 50 IRE
0.24 Lux @ F1.2, 50 IRE
0.32 Lux @ F1.2, 50 IRE
Fixed Gain: Adjustable
(0 ~ 25dB)
Fixed Gain: Adjustable
(0 ~ 18.309dB)
Gain:
S/N Ratio:
Gamma:
Lens Mount:
Fixed Gain: Adjustable
(0 ~ 27 dB)
Fixed Gain: Adjustable
(0 ~ 27 dB)
8 bit ≤ 3 Digit (Gain 0dB)
10 bit ≤ 10 Digit (Gain 0dB)
8 bit ≤ 3 Digit (Gain 0dB)
10 bit ≤ 10 Digit (Gain 0dB)
1.0
1.0
C-Mount
C-Mount
Video Output:
Digital 8 or 10 bit Camera Link (Base Configuration)
Optical Filter:
No IR Cut Filter
Optical Center Accuracy:
Shock:
Vibration:
8 bit ≤ 4 Digit (Gain 0dB)
8 bit ≤ 4 Digit (Gain 0dB)
bit ≤ 15 Digit (Gain 0dB)
10 bit ≤ 15 Digit (Gain 0dB) 10
12 bit ≤ 60 Digit (Gain 0dB)
Positional accuracy of H and V directions: +/- 0.31mm
Rotational accuracy of H and V: +/- 2.1deg.
Digital 8/10/12 bit
Camera Link (Base Config.)
Digital 8 or 10 bit Camera Link (Base Configuration)
No IR Cut Filter
Positional accuracy of H and V directions: +/- 0.31mm
Rotational accuracy of H and V: +/- 2.1 deg.
70G (3 directions, 3 times each)
70G (3 directions, 3 times each)
10G (20 to 200Hz)
10G (20 to 200Hz)
Positional: +/- 0.26mm
Rotational: +/- 1.7 deg.
Input Voltage:
12Vdc +/- 10%
Power Consumption:
< 1.8W, 150mA
< 2.5W, 208mA
< 3.0W, 250mA
< 4.0W, 333mA
-5° ~ 50°C (23° ~ 122°F)
-5° ~ 45°C (23° ~ 113°F)
-5° ~ 45°C (23° ~ 113°F)
-5° ~ 40°C (23° ~ 104°F)
Operating Temperature:
12Vdc +/- 10%
Storage Temperature:
-30° ~ 65 °C (-22° ~ 140°F)
Dimensions (mm):
28 (W) x 28 (H) x 29.5 (D)
(1.10” x 1.10” x 1.16”)
28 (W) x 28 (H) x 29.5 (D)
(1.10” x 1.10” x 1.16”)
28 (W) x 28 (H) x 36.5 (D)
(1.10” x 1.10” x 1.43”)
35 (W) x 35 (H) x 30.2 (D)
(1.37” x 1.37” x 1.18”)
43g (1.51 oz)
43g (1.51 oz)
65.5g (2.31oz)
80g (2.82oz)
Weight:
www.SentechAmerica.com
-30° ~ 65 °C (-22° ~ 140°F)
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
61
Progressive Scan
SEN TECH
Progressive Scan Overview
90fps
60fps
30fps
19fps
15fps
Frame Rate
UXGA
SXGA
Resolution
VGA
1/1.8”
1/2”
1/3”
Sensor
XGA
Models
Raw Digital Output
STC-B/BC33A
STC-B/BC83A
Raw Digital Output
Analog
Board
Analog
Cube
STC-B/BC152A
STC-B/BC202A
Cube
STC-A33A
STC-A83A
STC-A152A
Key Features
• Analog & Raw Digital Output (8 or10 bit parallel signal)
• Progressive Scan CCDs
• Accurate CCD Alignment (Relative to Lens Mount)
• VGA (0.3MP) to UXGA (2MP) Resolutions
• Color (RGB Bayer Filter) and Monochrome
Cased, Remote Head and Semi-Board for OEM
• Board,
Applications
• High Frame Rate Ideal for High Speed Image Capture
2 Trigger Modes (with Reset & Non-Reset)
•
- Pulse Width and Edge Preset
• Small Compact Size
62
www.SentechAmerica.com
STC-A202A
Remote Head
STC-SS1200
STC-SS1200-90
Board
STC-33
STC-83
Accessories
Cables
12W-0.45
12W-02
12W-03
12W-04
12W-05
12W-10
Lenses
Various C-Mount Lenses
Various Mega-Pixel Lenses
Various Telecentric Lenses
63
Progressive Scan
Raw Digital Output Models
Raw Digital Output
Sentech’s Raw Digital
Output cameras offer a
unique way to improve
system throughput and
decrease system costs.
If your system does
not need a traditional
Raw Digital
Output
Models
UXGA
SXGA
B/W
Color
1.4 MEGAPIXEL
STC-B152A
STC-BC152A
STC-B83A
STC-BC83A
Color
B/W
Color
VGA 0.3 MEGAPIXEL
28
64
Camera
STC-B33A
STC-BC33A
Your System
Raw Digital Video
Raw Digital Video
Standard
Video Signal
Camera
Front-end
Interface
Engine
1
2
USB 2.0
Camera Link®
GigE Vision®
Etc.
Decoding
System
Processing
3
4
B/W
XGA 0.8 MEGAPIXEL
33
Concept Diagram:
Raw Digital vs. Typical Camera Interface
2 MEGAPIXEL
STC-B202A
STC-BC202A
28 mm
video output format
and you want to
increase speed by not
having to decode the
video, then this camera
can help you achieve
your objectives.
B/W
Color
www.SentechAmerica.com
This series of cameras allows the user to take raw digital
video directly into their system bypassing the standard
video interface and decoding (See steps 2 to 3 above).
Resulting In:
•
•
•
Fast Reliable Video Data Transmission
Reduced Design Time
System Cost Reduction
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
65
Specifications
Monochrome
Color
Resolution:
Raw Digital Output Models
STC-B33A
STC-BC33A
STC-B83A
STC-BC83A
STC-B152A
STC-BC152A
STC-B202A
STC-BC202A
VGA (0.3 Megapixel)
XGA (0.8 Megapixel)
SXGA (1.4 Megapixel)
UXGA (2 Megapixel)
Image Sensor:
1/3” CCD (ICX424AL)
1/3” CCD (ICX424AQ)
1/3” CCD (ICX204AL)
1/3” CCD (ICX204AK)
1/2” CCD (ICX205AL)
1/2” CCD (ICX205AK)
1/1.8” CCD (ICX274AL)
1/1.8” CCD (ICX274AQ)
Signal Format:
Progressive: Monochrome or Color
Frame Rate:
Progressive: Monochrome or Color
30, 60, 94fps
30fps
15, 19fps
15fps
Active Picture Element:
648 (H) x 494 (V)
1024 (H) x 768 (V)
1360 (H) x 1040 (V)
1620 (H) x 1220 (V)
Chip Size (mm):
5.79 (H) x 4.89 (V)
5.8 (H) x 4.92 (V)
7.6 (H) x 6.2 (V)
8.5 (H) x 6.8 (V)
7.4 (H) x 7.4 (V)
4.65 (H) x 4.65 (V)
4.65 (H) x 4.65 (V)
4.4 (H) x 4.4 (V)
31.47 (30fps) / 62.94 (60fps) / 94.78 (94fps) Hz
29.59 Hz
15.28 (15fps) / 19.3 (19fps) Hz
15.32 Hz
Cell Size (µm):
Vertical Frequency:
Horizontal Frequency:
15.73 (30fps) / 31.47 (60fps) / 47.20 (90fps) kHz
23.23 kHz
15.10 (15fps) / 20.57 (19fps) kHz
19.18 kHz
Pixel Clock Frequency:
12.27 (30fps) / 24.5454 (60fps) / 36.82 (90fps) MHz
29.50 MHz
28.64 (15fps) / 36.82 (19fps) MHz
36.82 MHz
Scanning Method:
Sync System:
Communication:
Full, Partial (1/2, 1/4), Variable Partial Scanning and Binning (B/W models)
Full, Partial (1/2, 1/4), Variable Partial Scanning and Binning (B/W models)
Internal / External
Internal / External
RS232 via DF12-36DS-0.5V connector
RS232 via DF12-36DS-0.5V connector
Trigger Mode:
Edge Preset Trigger (V-reset, Non-reset)
Pulse Width Trigger (V-reset, Non-reset)
Edge Preset Trigger (V-reset, Non-reset)
Pulse Width Trigger (V-reset, Non-reset)
Shutter Speed:
OFF, 1/3 ~ 1/40,000 (30fps)
OFF, 1/7 ~ 1/80,000 (60fps)
OFF, 1/11 ~ 1/120,000 (90fps)
OFF, 1/5 to 1/96,000
OFF, 1/3 ~ 1/93,000 (15fps)
OFF, 1/5 ~ 1/120,000 (19fps)
OFF, 1/4 ~ 1/120,000
0.12 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.14 Lux @ F1.2, 50 IRE
0.14 Lux @ F1.2, 50 IRE
0.11 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.06 Lux @ F1.2, 50 IRE
0.08 Lux @ F1.2, 50 IRE
Minimum Illumination:
Gain:
S/N Ratio:
Gamma:
Lens Mount:
Interface Connector:
Optical Filter:
Optical Center Accuracy:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
Fixed Gain: Adjustable 0 ~ 27 dB
Fixed Gain: Adjustable 0 ~ 27 dB
@ 8bit output: ≤ 3 Digit (Gain 0 dB)
@ 10bit output: ≤ 10 Digit (Gain 0 dB)
@ 8bit output: ≤ 3 Digit (Gain 0 dB)
@ 10bit output: ≤ 10 Digit (Gain 0 dB)
1.0
1.0
C-Mount
C-Mount
DF12-36DS-0.5V (Hirose)
DF12-36DS-0.5V (Hirose)
No IR cut filter
No IR cut filter
Positional Accuracy in H and V directions: +/- 0.31mm
Rotational Accuracy of H and V: +/- 2.1 deg.
Positional Accuracy in H and V directions: +/- 0.31mm
Rotational Accuracy of H and V: +/- 2.1 deg.
12Vdc ± 10%
< 1.8W, 150mA
Depends on: 1) System design 2) System heat management conditions
12Vdc ± 10%
< 1.8W, 150mA
< 2.5W, 208mA
-30⁰ ~ 65⁰C (-22⁰ ~ 149⁰F)
-30⁰ ~ 65⁰C (-22⁰ ~ 149⁰F)
28 (W) x 28 (H) x 33 (D) mm (1.1” x 1.1” x 1.29”)
28 (W) x 28 (H) x 33 (D) mm (1.1” x 1.1” x 1.29”)
26g (0.91 oz)
26g (0.91 oz)
www.SentechAmerica.com
< 3.0W, 250mA
Depends on: 1) System design 2) System heat management conditions
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
67
Progressive Scan
Analog Models
Cube
Board and Remote Head
The Sentech Progressive Scan analog cube series cameras
are very powerful, analog-out, progressive scan
machine vision cameras. These cameras
have a very small package of only
28(W) x 28(H) x 46.3(D) mm in size
(including the C-Mount). This series
features UXGA ~ VGA CCD sensors
with scan rates of 15 ~ 90 fps, with
full resolution. These cameras also
feature full triggering functionality.
Features
UXGA
•
•
•
•
•
•
•
•
•
Monochrome
1/3", 1/2” and 1/1.8” CCD
15, 19, 30, 60 and 90fps
High Speed Triggering
Square Pixels
Analog Output
Communication: RS232
Partial Scanning
Manual Dip Switches for
Customizable Performance
• Size: 28 (W) x 28 (H) x 46.3 (D) mm
Cube
Models
Board
Models
2 MEGAPIXEL
0.8 MEGAPIXEL
STC-A202A
B/W
SXGA 1.4 MEGAPIXEL
STC-A152A
XGA
VGA
28 mm
The STC-33 and STC-83 are full featured,
low cost, progressive scan machine
vision board cameras with a 1/3”
monochrome CCD. These cameras
provide an analog output signal
and feature high speed triggering
capability. The STC-33 (VGA)
offers 30 or 60 fps and the STC-83
(XGA) offers 30 fps.
B/W
B/W
STC-83
0.3 MEGAPIXEL
B/W
STC-33
XGA
VGA
•
•
•
•
•
•
•
•
•
VGA (30, 60 fps) & XGA (30 fps)
Monochrome
1/3” CCD
Analog Output
High Speed Triggering
Partial Scanning
Square Pixels
Dip Switches
Size: 30(W) x 30(H) x 32(D) mm
0.8 MEGAPIXEL
STC-A83A
B/W
0.3 MEGAPIXEL
STC-A33A
Features
B/W
Remote Head
Models
0.3 MEGAPIXEL
VGA
B/W, 60fps
STC-SS1200
0.3 MEGAPIXEL
28
B/W, 90fps
68
Features
www.SentechAmerica.com
VGA
STC-SS1200-90
•
•
•
•
•
•
VGA (60, 90 fps)
Monochrome
1/3” CCD
Analog Output
High Speed Triggering
Various Head Cable Entry
Configurations
• Square Pixels
• Size: 20(W) x 20(H) x 25(D) mm
69
Specifications
Models
Resolution:
STC-A33A
STC-A83A
STC-A152A
STC-A202A
VGA (0.3 MP)
XGA (0.8 MP)
SXGA (1.4 MP)
UXGA (2 MP)
Type:
Image Sensor:
1/3” CCD
(ICX424AL)
STC-SS1200-90
VGA (0.3 MP)
1/3” CCD
(ICX204AL)
1/2” CCD
(ICX205AL)
30 fps
1/1.8” CCD
(ICX274AL)
1/3” CCD
(ICX424AL)
15 fps
648 (H) x 494 (V)
1024 (H) x 768 (V) 1360 (H) x 1040 (V) 1620 (H) x 1220 (V)
5.79 (H) x 4.89 (V)
5.80 (H) x 4.92 (V)
7.60 (H) x 6.20 (V)
4.65 (H) x 4.65 (V)
1/3” CCD
(ICX204AL)
Monochrome Progressive Analog
15, 19 fps
Chip Size (mm):
7.4 (H) x 7.4 (V)
STC-83
XGA (0.8 MP)
Board
Monochrome Progressive Analog
30, 60, 90 fps
STC-33
VGA (0.3 MP)
Remote Head
Active Picture Element:
Cell Size (µm):
STC-SS1200
Cube
Signal Format:
Frame Rate:
Analog Models
60 fps
90 fps
30, 60 fps
30 fps
648 (H) x 494 (V)
1024 (H) x 768 (V)
8.50 (H) x 6.80 (V)
5.79(H) x 4.89(V)
5.80 (H) x 4.92 (V)
5.79(H) x 4.89(V)
5.80 (H) x 4.92 (V)
4.4 (H) x 4.4 (V)
7.4 (H) x 7.4 (V)
4.65 (H) x 4.65 (V)
7.4 (H) x 7.4 (V)
4.65 (H) x 4.65 (V)
15.32
59.94
89.91
29.97 / 59.94
29.18
Vertical Frequency (Hz):
31.47 / 62.94 / 94.78
29.59
Horizontal Frequency (kHz):
15.73 / 31.47 / 47.20
23.23
15.1 / 20.57
19.18
31.47
47.20
15.73 / 31.47
23.228
Pixel Clock Frequency (MHz):
12.27 / 24.55 / 36.82
29.5
28.64 / 36.82
36.82
24.55
36.82
12.27 / 24.55
14.75
Scanning Method:
15.28 / 19.30
Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4, Variable),
Binning, Binning Partial Scan (1/1, 1/2, 1/4, Variable)
Full Scan, Partial Full Scan, Partial Scan (1/2, 1/4),
Binning, Binning Partial Scan (1/1, 1/2, 1/4)
Sync System:
Internal / External (HD / VD)
Internal / External (HD / VD)
Communication:
RS232 via 12pin connector
N/A
Trigger Mode:
Edge Preset: V Reset, Non-Reset
Pulse Width Trigger: V Reset, Non-Reset
Shutter Speed:
Dip Switch: OFF, 1/200, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/12,000
Communication: OFF, 1/2 to 1/100,000 (Variable at every H and Clock)
Minimum Illumination:
0.14 Lux @ F1.2
50 IRE
0.17 Lux @ F1.2
50 IRE
Gain:
0.16 Lux @ F1.2
50 IRE
Edge Preset: V Reset, Non-Reset, Sync Reset, Restart-Reset
Pulse Width Trigger: V Reset, Non-Reset, Sync Reset, Restart-Reset
0.07 Lux @ F1.2
50 IRE
1/60 ~ 1/20,000
(8 Steps)
1/90 ~ 1/10,000
(8 Steps)
1/30 ~ 1/16,000
(10 steps)
1/30 ~ 1/16,000
(10 steps)
1.82 Lux @ F1.2
50 IRE
1.64 Lux @ F1.2
50 IRE
0.14 Lux @ F1.2
50 IRE
0.17 Lux @ F1.2
50 IRE
Manual (0 to 27 dB)
S/N Ratio:
Edge Preset Trigger (10 Steps)
Pulse Width Trigger
AGC/Manual (4 to 24 dB)
56dB (Gain 0dB)
52dB (Gain 0dB)
Gamma:
1.0 / 0.45
1.0 / 0.45
50dB (Gain 0dB)
1.0
Lens Mount:
C-Mount
Special Mount (Male 10.5 Female P0.5)
CS-Mount
Video Output:
1Vp-p, 75Ω, DC Coupling (0V Clamp)
1Vp-p, 75Ω
Optical Filter:
No IR cut filter
No IR cut filter
Optical Center Accuracy:
Shock and Vibration:
Position accuracy in H and V direction: +/- 0.31mm
Vibration: 10G (20 to 200Hz) / Shock: 70G (3 directions, 3 times each)
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
Position accuracy in H and V direction: +/- 0.31mm
Vibration: 10G (20 to 200Hz) / Shock: 70G (3 directions, 3 times each)
12Vdc +/- 10%
1.8W, 150mA
2.2 W , 183mA
N/A
12Vdc +/- 10%
3.0 W, 250mA
2.64W, 220 mA
-5° ~ 50°C ( 23° ~ 122°F)
1.44W, 120 mA
1.56W, 130 mA
-10° ~ 45°C ( 14° ~ 113°F)
-30° ~ 65°C ( -22° ~ 149°F)
-30° ~ 60°C ( -22° ~ 140°F)
28 (W) x 28 (H) x 40 (D) mm
(1.10” x 1.10” x 1.57”)
CCD Head: 20 (W) x 20 (H) x 25 (D) mm (0.78” x 0.79” x 0.98”)
CCU: 110 (W) x 80 (H) x 28 (D) mm (4.33” x 3.14” x 1.10”)
30 (W) x 30 (H) x 32 (D) mm
(1.10” x 1.10” x 1.57”)
43g (1.5 oz)
CCD Head: 80g (2.82 oz)
CCU: 150g (5.33 oz)
27g (0.95 oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
71
Specialty Cameras
SEN TECH
Specialty Overview
Wedge IR
Wedge
Dome
Configuration
Board
Type
B/W
1/3”
Sentech’s family of Transit Cameras have
an installed base of over 38,000 units in
some of the largest transit authorities
in America. The cameras are composed
of two key parts, the camera module
and the housing, both components were
specifically designed for the transit
market. These are not low-end security
cameras. They are rugged systems
designed specifically for the demanding
environment of transit buses, trains.
Sensor
Color
Models
1/4”
Transit
Cameras
Transit
STC-632DLx
STC-632WLx
STC-632IWLx
Night Eye
STC-UE54
STC-HUE64
See pages 74-75
Night Eye
The Night Eye camera was specifically designed to provide video
in very low light environments. This remarkable analog video
cameras can “see” with virtually no visible light. Its compact size
and board level OEM configuration makes it ideal for system
design.
See pages 76-77
72
www.SentechAmerica.com
73
Specifications
Transit Models
Dome and Wedge
Models
Image Sensor:
NTSC
PAL
1/3” CCD (ICX638AK)
Horizontal Resolution:
1/3” CCD (ICX639AK)
480 TV Lines
Frame Rate:
Effective Picture Element:
Gain:
30 fps
768 (H) x 494 (V)
752 (H) x 582 (V)
AGC / Fixed (Software Selectable)
S/N Ratio:
Minimum Illumination:
White Balance:
>48dB (Gain 0dB)
0.17 Lux @ F1.2, AGC On, 20 IRE
0.14 Lux @ F1.2, AGC On, 20 IRE
Auto White Balance (Manual via DSP)
Electronic Shutter:
1/60 ~ 1/100,000
1/50 ~ 1/100,000
Electronic Iris:
1/60 ~ 1/100,000
1/50 ~ 1/100,000
Mirror Image:
Aperture (Sharpness):
Normal / Mirror (Software or Hardware Selectable)
On/Off (User Selectable) / Programmable
Lens Mount:
Micro Lens Lock Mount
Microphone:
Available on Select Models (Includes volume control)
LED Indicator:
Shock and Vibration:
Input Voltage:
3 modes selectable: On/Off, Blinking, Steady
Vibration: 10G (20 to 200Hz)
Shock: 70G (3 directions, 3 times each)
+ 7V ~ +13Vdc
Operating Temperature:
-10° ~ 50°C (14° ~ 122°F)
Storage Temperature:
-30° ~ 65°C (-22° ~ 149°F)
5 Configurations:
High Impact Metal Dome High Impact Plastic Dome
High Impact Metal Wedge High Impact Plastic Wedge
High Impact Plastic Day/Night Wedge
Easy Installation:
Designed for fast, easy, low cost installation.
Small Size:
Domes: 89 (W) x 66 (H) x 89 (D) mm (3.5” x 2.6” x 3.5”)
Wedges: 89 (W) x 66 (H) x 89 (D) mm (3.5” x 2.6” x 3.5”)
IR Wedge: 89 (W) x 84.8 (H) x 89 (D) mm (3.5” x 3.3” x 3.5”)
Durable:
Programmable DSP:
These cameras are specifically designed for rough environments.
Shock rated at 70 Gs. Vibration rated at 10 Gs. Supports a wide
temperature range.
DSP is programmable in order to maximize performance across
environmental demands of public transportation vehicles.
www.SentechAmerica.com
High Impact Metal Casting:
Optional Microphone and LED Light
High Impact Glass-Reinforced Plastic:
Includes Microphone and LED Light
Sentech Transit Camera
The Sentech Transit Cameras are specifically designed for mobile vehicles where
durability and image performance are critical. Our transit cameras will work with
virtually any transit recorder, analog or digital. The Sentech Transit Cameras address
two critical areas of performance in the transit industry. First, the ability to take good
usable images in a variety of lighting conditions. Second, the ability to have a clear
image from a close-up target to a distant target. Our housings are designed for fast,
easy installation and maintenance. We will gladly put our Transit Cameras in a side by
side performance/durability test against any competitor. If your organization needs
the best Transit Cameras at the lowest price, then please give us a call.
Sentech’s IR Illumination (Day/Night) Transit Camera
Our IR Transit Camera was designed specifically for the public transportation industry.
It uses special IR illumination that resolve two big problems on trains and buses. First,
“hot spots” on close-up targets are virtually eliminated. Second, one unit can evenly
illuminate the entire interior of a bus. The Sentech IR camera is also designed for easy
installation and maintenance.
Transit Domes
Configuration
Transit Wedges
Configuration
Transit Wedges
IR Illumination
Configuration
Available in metal
casting or glassreinforced plastic.
Available in metal
casting or glassreinforced plastic.
Available in glassreinforced plastic.
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
75
Specifications
Night Eye Models
Board
Models
STC-UE54
(Standard Resolution)
STC-HUE64
(High Resolution)
Image Sensor:
1/4” EIA CCD (ICX226AL)
1/4” EIA CCD (ICX278AL)
380 TV Lines
570 TV Lines
Horizontal Resolution:
Scanning Method:
Frame Rate:
Effective Picture Element:
2:1 Interlace
Variable, from 3 ~ 30fps (self regulating)
512 (H) x 492 (V)
768 (H) x 494 (V)
Horizontal Frequency:
15.734 kHz
Vertical Frequency:
59.94 Hz
Chip Size:
4.34 (H) x 3.69 (V) mm
4.43 (H) x 3.69 (V) mm
Cell Size:
7.15 (H) x 5.55 (V) μm
4.75 (H) x 5.55 (V) μm
Gain:
Gamma:
Sync System:
Communication:
AGC ON
0.45
Internal / External (Automatically switch)
RS232C via CN2 (SM04B-SRSS-TB) connector
Electronic Iris:
1/1 ~ 1/10,000 seconds
Mirror Image:
Normal / Horizontal / Vertical / Horizontal and Vertical
(180 deg. retated image) mirror image
DSP:
R2A45201BG (Renesas)
Video Output:
1.0 Vp-p 75 Ohm RS-170
Lens Mount:
None
Input Voltage:
4.5Vdc ~ 5.5 Vdc
Power Consumption:
Less than 1.0 W
Operating Temperature:
Storage Temperature:
Dimension
- Head Model
- CCU
Weight:
Designed specifically for police and military
use, this ultra-compact series has the ability
to “see” in completely dark environments
with very low visible spectrum lighting.
It has internal and external sync, RS232
communication and RS170 video outputs.
-5° ~ 45°C (23° ~ 113° F)
-30° ~ 65°C (-22° ~ 149° F)
10 (H) x 44 (W) x 3.65 (D) mm (0.39” x 1.73” x 0.14”)
38 (H) x 75 (W) x 5 (D) mm (1.49” x 2.95” x 0.19”)
23g (0.81 oz.)
www.SentechAmerica.com
Accessories
Due to the OEM nature of this
camera, there are no assignable
accessories specifically for this
product.
Depending on product use,
various standard accessories
may be applicable.
Please contact us for your
specific needs.
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
77
Analog Series
SEN TECH
Analog Overview
570
480
Hor. TV Lines
330
B/W
Type
Color
1/2”
Sensor
1/4”
Models
1/3”
Cased
Cased Color
STC-620 / 625
STC-630 / 635
STC-640 / 645
STC-N63 / P63
Cased B/W
STC-E42A / C42A
Board
Cube
STC-E43A / C43A
Remote Head
Sentech offers an extensive range of
Analog cameras in board, cased and
OEM configurations. These cameras
have been designed for a wide range
of applications: microscopy, medical
equipment, endoscopic equipment,
otoscopes, spectrometers, physically
abusive environments, hand held
instrumentation, inter-oral cameras,
bar code readers and even sophisticated
machine vision systems. Our cameras
are feature rich, provide excellent
images and proven dependable
performance.
78
www.SentechAmerica.com
Board Color
STC-620 / 625
STC-630 / 635
STC-640 / 645
STC-DN64 / DP64
STC-N54 / P54
STC-N63 / P63
STC-N64 / P64
STC-N632 / P632
Board B/W
STC-170 / 175
STC-172 / 177
STC-E631 / C631
Remote Head
STC-R640 / R645
79
Analog Series
Color Models
Cased
In compact housing, the STC-N63
(NTSC) and STC-P63 (PAL) cameras
employ a high resolution, high
sensitivity, 1/3" color CCD that
produces 480 TV lines of horizontal
resolution. The STC-N63/P63 series
is available in a cased version
with five optional back panels (BJ,
BT, CJ, CC or CT) or a board level
configuration.
BJ Model
•
•
•
•
Power Jack for Power In
BNC Connector (Video Out)
Auto Iris Lens Connection
(DC Driven)
Auto Iris Level Adjustment
NTSC / PAL
Models
STC-N63 / P63 1/3” CCD
BT Model
•
•
•
•
Terminal Block (Spring Loaded) for Power In
BNC Connector (Video Out)
Auto Iris Lens Connection (DC Driven)
Auto Iris Level Adjustment
CC Model
•
•
•
•
12 Pin Hirose Power, Video Out, Y/C Out, EXT HD/VD Sync
BNC Connector (Video Out)
Push-to-Set/Auto White Balance
RS-232C Serial I/O for User DSP Programming
80
NTSC / PAL
Models
STC-620 / 625
1/3” CCD
STC-630 / 635
1/4” CCD
STC-640 / 645
1/2” CCD
A Model
BT Model
AS Model
CC Model
BJ Model
CT Model
•
•
•
Power Jack
RCA Connector (Video Out)
Manual Controls:
Color, Brightness,
Sharpness, Gamma
12pin Hirose: Power, Y/C Out
BNC Connector (Video Out)
Manual Controls:
Color, Brightness,
Sharpness, Gamma
Power Jack for Power In
BNC Connector (Video Out)
Y/C Connector (Y/C Video Out)
Push-to-Set / Auto White Balance
RS-232C Serial I/O for User DSP Programming
CT Model
•
•
•
•
* This model is available in EXview High Sensitivity CCDs. See page 101
•
•
•
CJ Model
•
•
•
•
•
The 600 Series offers
1/4”, 1/3” and 1/2” CCDs with
high resolution. These cameras
feature a user programmable 10
bit DSP. The series is available in
six optional back panels (A, AS,
BJ, BT, CC or CT) or a board level
configuration.
Terminal Block (Spring Loaded) for Power In BNC Connector (Video Out)
Y/C Connector (Y/C Video Out)
Push-to-Set/Auto White Balance
RS-232C Serial I/O for User DSP Programming
www.SentechAmerica.com
•
•
•
Power Jack
BNC Connector (Video Out)
DC Auto Iris Lens Connector
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
•
•
•
•
Power Terminal
BNC Connector (Video Out)
Auto Iris Level Control
DC Auto Iris Lens Connector
•
12pin Hirose: Power,
Y/C Out, HD/VD In
• BNC Connector (Video Out)
• Y/C Connector (Y/C Out)
• RS-232 Mini Jack DSP
Set Up Camera Control
•
•
•
•
•
•
Power Terminal
BNC Connector (Video Out)
Y/C Connector (Y/C Out)
RS-232 Mini Jack DSP Ctrl
DC Auto Iris Lens Connector
Auto Iris Level Control
81
Specifications
NTSC
PAL
Image Sensor:
Horizontal Resolution:
Signal Format:
Effective Picture Element:
Horizontal Frequency:
Vertical Frequency:
Scanning System:
Sync System:
Color Cased Models
STC-N63
STC-P63
STC-620
STC-625
STC-630
STC-635
STC-640
STC-645
1/3” CCD (ICX638BKA)
1/3” CCD (ICX639BKA)
1/2” CCD (ICX418AKL)
1/2” CCD (ICX419AKL)
1/3” CCD (ICX408AK)
1/3” CCD (ICX409AK)
1/4” CCD (ICX228AK)
1/4” CCD (ICX229AK)
480 TV Lines
480 TV Lines
NTSC / PAL
NTSC / PAL
768 (H) x 494 (V) / 752 (H) x 582 (V)
768 (H) x 494 (V) / 752 (H) x 582 (V)
15.734 kHz / 15.625 kHz
15.734 kHz / 15.625 kHz
59.94 Hz / 50.00 Hz
59.94 Hz / 50.00 Hz
2:1 Interlace
2:1 Interlace
Internal / External (select models)
Internal / External (select models)
RS-232C Serial I/O Port (select models)
RS-232C Serial I/O Port (select models)
1/60 Fixed (Programmable via DSP)
Standard: 1/60 (1/50) , 1/125 (1/100), 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000
Extended: 2, 4, 6, 8, 10, 12,14, 16 fields
Electronic Iris:
1/60 (1/50) ~ 1/100,000
1/60 (1/50) ~ 1/10,000
Auto Iris Lens Connector:
DC Type (select models)
N/A
Serial Communication:
Electronic Shutter:
Minimum Illumination:
White Balance:
DSP:
Mirror Image:
S/N Ratio:
Gain:
Gamma:
Negative / Positive:
Backlight:
Video Output:
Lens Mount:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
0.17 Lux @ F1.2, 20 IRE
0.14 Lux @ F1.2, 20 IRE
0.42 Lux @ F1.2, 20 IRE
0.24 Lux @ F1.2, 20 IRE
0.43 Lux @ F1.2, 20 IRE
0.26 Lux @ F1.2, 20 IRE
0.56 Lux @ F1.2, 20 IRE
0.70 Lux @ F1.2, 20 IRE
0.53 Lux @ F1.2, 50 IRE
0.47 Lux @ F1.2, 50 IRE
1.13 Lux @ F1.2, 50 IRE
0.66 Lux @ F1.2, 50 IRE
1.54 Lux @ F1.2, 50 IRE
0.80 Lux @ F1.2, 50 IRE
1.93 Lux @ F1.2, 50 IRE
1.43 Lux @ F1.2, 50 IRE
ATW / Manual / Push-to-Set (select models)
ATW / Manual / Push-to-Set (select models)
10 bit DSP (User Programmable)
10 bit DSP (User Programmable)
ON/OFF (DSP or Dip Switch Selectable)
N/A
>48dB (AGC Off )
>45dB (AGC Off )
AGC / Fixed (via DSP)
AGC / Fixed (via DSP) 0 ~ 30dB
0.45 (Adjustable via DSP)
0.45, 1.0 or Other values (Adjustable via DSP)
N/A
On/Off Selectable
On/Off (DIP switch selectable)
Back Light compensation at electronic shutter
Composite Video or Y/C (select models)
CS Mount (C-Mount with adaptor)
12Vdc +/- 10%
Composite Video or Y/C (select models)
C-Mount
CS Mount (C-Mount with adaptor)
12Vdc +/- 10%
1.80W; 150mA
3.0W; 250mA
-10⁰ ~ 45⁰C (14⁰ ~ 113⁰F)
-10⁰ ~ 45⁰C (14⁰ ~ 113⁰F)
-30⁰ ~ 60⁰C (-22⁰ ~ 140⁰F)
-30⁰ ~ 60⁰C (-22⁰ ~ 140⁰F)
36 (W) x 36 (H) x 37.35 (D) mm (1.44” x 1.44” x 1.49”)
51 (W) x 51 (H) x 55.5 (D) mm (2.4” x 2.4” x 2.22”)
70g (2.46oz)
190g (6.70oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
83
Analog Series
Color Models
Board
The STC-N54 (NTSC) / STC-P54 (PAL)
low resolution and the STC-N64
(NTSC) / STC-P64 (PAL) high
resolution are 1/4” CCD, high
performance, color board
cameras. They are targeted for
low cost, high performance color
applications where size is critical.
NTSC / PAL
Models
STC-N54 / P54
STC-N64 / P64
1/4” CCD (Low Res)
NTSC / PAL
Models
1/3” CCD
STC-N632 / P632
1/4” CCD (High Res)
Features
•
•
•
•
•
•
The STC-N632 (NTSC)
and STC-P632 (PAL) were
designed for providing good,
reliable, color video in rugged
environments with high
temperature and vibration
levels.
1/4"Color CCD
330 TV / 480 TV Lines
10-Bit DSP (User Programmable)
Field Integration
5 Lens Options Including CS Mount
Size: 26 (W) x 22 (H) x Var. (D) mm
The STC-DN64 (NTSC) and STC-DP64 (PAL) are extremely small,
color cameras with the CCD located on a flexible ribbon. It was
designed to fit into instruments the size of a ball point pen.
STC-DN64 / DP64
Features
• 1/3” Color CCD
• Designed For Rugged Environments
• 480 TV Lines
• Programmable DSP
• Micro Lens Lock Mount
• Size: 26 (H) x 26 (W) x Var. (D) mm
1/4” CCD
Features
•
•
•
•
•
1/4"Color CCD
480 TV Lines
Programmable DSP
Field Integration
CCU Board: 48.5 (W) x 10 (H) mm
CCD Head: 13.8 (W) x 10 (H) mm
84
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
85
Analog Series
Color Models
Board
The STC-N63 (NTSC) and
STC-P63 (PAL) offers a highresolution, high sensitivity, 1/3”
color CCD in a very compact
board configuration. These
low cost cameras offer user
programmable DSP and setup.
Sentech’s most powerful cased
series is also available in a boardlevel configuration. The 600 Series
offers a 1/4", 1/3” and 1/2” CCD
with high resolution. These cameras
feature an user programmable 10
bit DSP.
* This model is available in EXview High Sensitivity CCDs. See page 101
NTSC / PAL
Models
STC-N63 / P63 1/3” CCD
Features
86
1/2” CCD
1/3” CCD
• 1/3” Color CCD
• 480 TV Lines
• 10-Bit Digital Signal Processing
• White Balance (Auto, Manual or Push-to-Set)
• 7 Lens Options Available
• Size: 32 (W) x 32 (H) x Var. (D) mm
Micro Lens Mount
NTSC / PAL
Models
CS Mount
www.SentechAmerica.com
1/4” CCD
STC-620 / 625
STC-630 / 635
STC-640 / 645
CS Mount
Features
• 1/4", 1/3” and 1/2” Color CCD
• 480 TV Lines
• Gamma: 0.45, 1.0 or Other values via DSP
• Gain: Manual / AGC (0 - 30dB)
• 10-Bit DSP, 3rd Generation (User Accessible)
• Negative / Positive Image
• Internal / External Sync (Select Models)
• Y/C (Select Models)
• 7 Lens Options Including CS Mount
• Size: 45 (W) x 45 (H) x Var. (D) mm
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
Micro Lens Mount
w/o Mount
87
Specifications
NTSC
PAL
Image Sensor:
Horizontal Resolution:
STC-N54
STC-P54
STC-N64
STC-P64
STC-DN64
STC-DP64
1/4” CCD (RJ2411AB0PB)
1/4” CCD (RJ2421AB0PB)
1/4” CCD (ICX648BKA)
1/4” CCD (ICX649BKA)
1/4” CCD (ICX228AK)
1/4” CCD (ICX229AK)
330 TV Lines
Signal Format:
Effective Picture Element:
Serial Communication:
480 TV Lines
768 (H) x 494 (V)
752 (H) x 582 (V)
768 (H) x 494 (V)
752 (H) x 582 (V)
Internal
Internal
Programmable DSP
via I²C
Programmable DSP
via I²C
RS-232C Serial I/O Port
(select models)
Programmable via Serial Communication
Programmable via DSP
1/60 ~ 1/100,000 / 1/50 ~ 1/100,000
N/A
RS-232C Serial I/O Port (select models)
Programmable via DSP
Standard: 1/60 (1/50) , 1/125 (1/100), 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10,000
Extended: 2, 4, 6, 8, 10, 12,14, 16 fields
1/60 ~ 1/100,000 / 1/50 ~ 1/100,000
1/60 ~ 1/10,000 / 1/50 ~ 1/10,000
DC Type
(select models)
N/A
N/A
0.52 Lux @ F1.2, 20 IRE
0.24 Lux @ F1.2, 20 IRE
0.52 Lux @ F1.2, 20 IRE
0.24 Lux @ F1.2, 20 IRE
0.17 Lux @ F1.2, 20 IRE
0.14 Lux @ F1.2, 20 IRE
0.42 Lux @ F1.2, 20 IRE
0.24 Lux @ F1.2, 20 IRE
0.43 Lux @ F1.2, 20 IRE
0.26 Lux @ F1.2, 20 IRE
0.56 Lux @ F1.2, 20 IRE
0.70 Lux @ F1.2, 20 IRE
1.68 Lux @ F1.2, 50 IRE
0.94 Lux @ F1.2, 50 IRE
1.81 Lux @ F1.2, 50 IRE
0.71Lux @ F1.2, 50 IRE
1.81 Lux @ F1.2, 50 IRE
0.71 Lux @ F1.2, 50 IRE
0.53 Lux @ F1.2, 50 IRE
0.47 Lux @ F1.2, 50 IRE
1.13 Lux @ F1.2, 50 IRE
0.66 Lux @ F1.2, 50 IRE
1.54 Lux @ F1.2, 50 IRE
0.80 Lux @ F1.2, 50 IRE
1.93 Lux @ F1.2, 50 IRE
1.43 Lux @ F1.2, 50 IRE
Fully User Programmable with Sentech Software
AWB / Manual (via DSP)
Gain:
Gamma:
AWB / Manual
(via DSP)
AWB / Manual /
Push-to-Set (via DSP)
Normal / Mirror
ON/OFF
N/A
(via DSP and Hardware Switch) (DSP or Dip Switch Selectable)
>48dB (AGC Off )
>48dB (AGC Off )
>45dB (AGC Off )
AGC / Fixed (via DSP)
AGC / Fixed (via DSP)
AGC / Fixed (via DSP) 0 ~ 30dB
Programmable via DSP
Video Output:
AWB / Manual / Push-to-Set
(via DSP)
Fully User Programmable with Sentech Software
Normal / Mirror
(via DSP)
S/N Ratio:
Programmable via DSP
Composite Video
1.0Vp-p, 75Ω
Negative / Positive:
Composite Video
1.0Vp-p, 75Ω
N/A
Backlight:
Composite Video or Y/C
(select models)
Composite Video or Y/C
(select models)
N/A
N/A
N/A
On/Off Selectable
On/Off
(DIP switch selectable)
CS / Micro Lens Mount
N/A
Micro Lens Mount
w/ Locking Mechanism
5Vdc ~ 12Vdc
4.8Vdc ~ 11Vdc
7Vdc ~ 13Vdc
12Vdc
0.65W; 130mA at 5Vdc
1.0W; 83mA at 12Vdc
1.80W; 150mA
0.6W; 120mA at 5Vdc ~ 50mA at 12Vdc
Operating Temperature:
-10° ~ 50°C (14° ~ 122°F)
-10° ~ 45°C (14° ~ 113°F)
Storage Temperature:
-20° ~ 60°C (-4° ~ 140°F)
-30° ~ 60°C (-22° ~ 140°F)
Weight:
Internal / External (select models)
0.5 Lux @ F1.2, 20 IRE
0.3 Lux @ F1.2, 20 IRE
Mirror Image:
Dimensions (mm):
1/4” CCD (ICX228AK)
1/4” CCD (ICX229AK)
2:1 Interlace
DSP:
Power Consumption:
STC-640
STC-645
NTSC / PAL
AWB (2800 ~ 7000k)
Input Voltage:
STC-630
STC-635
480 TV Lines
White Balance:
Lens Mount:
STC-620
STC-625
1/3” CCD (ICX638BKA) 1/3” CCD (ICX638BKA) 1/2” CCD (ICX418AKL) 1/3” CCD (ICX408AK)
1/3” CCD (ICX639BKA) 1/3” CCD (ICX639BKA) 1/2” CCD (ICX419AKL) 1/3” CCD (ICX409AK)
Internal / External
(select models)
Auto Iris Lens Connector:
Minimum Illumination:
STC-N63
STC-P63
2:1 Interlace
Sync System:
Electronic Iris:
STC-N632
STC-P632
NTSC / PAL
512 (H) x 492 (V)
752 (H) x 582 (V)
Scanning System:
Electronic Shutter:
Color Board Models
CS / Micro Lens Mount
C / CS / Micro Lens Mount
12Vdc
3.0W; 250mA
-10° ~ 45°C (14° ~ 113°F)
-30° ~ 60°C (-22° ~ 140°F)
-30⁰ ~ 65⁰C (-22⁰ ~ 149⁰F)
26 (W) x 22 (H) x Var. (D)
(1.04” x 0.88” x Var.)
Board: 48.5 (W) x 10 (H)
Head: 11.8 (W) x 10 (H)
26 (W) x 26 (H) x Var. (D)
(1.04” x 1.04” x Var.)
70g (0.24 oz)
3g (0.105 oz)
12g (0.42oz)
www.SentechAmerica.com
Back Light compensation at electronic shutter
32 (W) x 32 (H) x Var. (D)
(1.28” x 1.28” x Var.)
45 (W) x 45 (H) x Var. (D)
(1.77” x 1.77” x Var.)
10g (0.35 oz)
45g (1.59oz)
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
89
Analog Series
Monochrome Models
Cased
Board
The STC-E42A/C42A and
STC-E43A/C43A series are analog cube cameras
designed for machine vision. These are
available in either EIA or CCIR formats. They
feature field/frame integration, internal or
external sync and RS232 communication.
The small configuration allows them to be
utilized in very tight spaces.
* This model is available in EXview High Sensitivity CCDs. See page 101
Cased
EIA / CCIR
Models
STC-E42A / C42A 1/2” CCD
The STC-E631 and the STC-C631 cameras have a 1/3” CCD.
They are small, inexpensive, monochrome cameras specially
designed for rugged environments.
The STC-170 / 175 have a 1/3” CCD and the STC-172
/ 177 have a 1/2” CCD. These low cost machine vision
cameras offer an integration HOLD feature for low
light applications, field/frame integration, Internal/
External sync and an Interlace/Non-Interlace output.
* This model is available in EXview High Sensitivity CCDs. See page 101
Board
EIA / CCIR
Models
1/3” CCD
STC- E631 / C631
Features
•
•
•
•
•
Designed For Rugged Environment
570 TV Lines
Programmable DSP
Field Integration
CS & C-Mount (w/adapter) or
Micro Lens Mount
• Size: 26 (W) x 26 (H) mm
STC-E43A / C43A 1/3” CCD
Features
•
•
•
•
•
•
•
•
•
1/2” or 1/3” CCD
Available in EIA & CCIR Formats
570 (EIA) and 560 (CCIR) TV Lines
Field / Frame Integration
Internal / External Sync
Gamma: 0.45 or 1.0
C-Mount
28(W) x 28(H) x 46.3(D) mm
12Vdc Power
Remote Head
EIA / CCIR
Models
28 mm
1/3” CCD
STC-170 / 175
1/2” CCD
STC-172 / 177
28
STC-R170 / R175
is available with
a remote CCD
90
www.SentechAmerica.com
CS Mount
Features
• 1/3” and 1/2” CCD
• Internal / External Sync. (HD/VD)
• 570 TV Lines (EIA) or
560 TV Lines (CCIR)
• Field / Frame Integration
• Integration Hold
• Interlace / Non-Interlace
• CS Mount or Micro Lens Mount
91
Specifications
Monochrome Cased & Board
Cased
EIA
CCIR
Image Sensor:
Horizontal Resolution:
Vertical Resolution:
STC-E42A
STC-C42A
STC-E43A
STC-C43A
STC-E631
STC-C631
STC-170
STC-175
STC-172
STC-177
1/2” CCD (ICX418AL)
1/2” CCD (ICX419AL)
1/3” CCD (ICX408AL)
1/3” CCD (ICX409AL)
1/3” CCD (ICX408AL)
1/3” CCD (ICX409AL)
1/3” CCD (ICX408AL)
1/3” CCD (ICX409AL)
1/2” CCD (ICX418ALL)
1/2” CCD (ICX419ALL)
570 TV Lines / 560 TV Lines
570 TV Lines
570 TV Lines / 560 TV Lines
Field: 350 TV Lines / 410 TV Lines
Frame: 485 TV Lines / 575 TV Lines
350 TV Lines / 410 TV Lines
Field: 350 TV Lines / 410 TV Lines
Frame: 485 TV Lines / 575 TV Lines
Signal Format:
EIA / CCIR
Frame Rate:
Effective Picture Element:
Chip Size (mm):
Cell Size (µm):
Horizontal Frequency:
Board
EIA / CCIR
30fps
30fps
795 (H) x 595 (V) / 752 (H) x 582 (V)
768 (H) x 494 (V) / 752 (H) x 582 (V)
7.40 (H) x 5.95 (V)
5.59 (H) x 4.68 (V)
8.4 (H) x 9.8 (V) / 8.6 (H) x 8.3 (V)
6.3 (H) x 7.4 (V) / 6.5 (H) x 6.25 (V)
5.59 (H) x 4.68 (V)
6.4 (H) x 7.5 (V) / 6.53 (H) x 6.39 (V)
7.40 (H) x 5.95 (V)
6.35 (H) x 7.4 (V) / 6.50 (H) x 6.25 (V)
15.734 kHz / 15.625 kHz
15.734 kHz / 15.625 kHz
Vertical Frequency:
59.94 Hz / 50.00 Hz
59.94 Hz / 50.00 Hz
Integration Mode:
Field / Frame
Scanning System:
2:1 Interlace
Sync System:
Communication:
Electronic Shutter:
Internal
Internal / External Internal / External (HD/VD), Auto Switching by HD Input
RS232 via 12 pin connector
Programmable DSP via I2C
N/A
Dip Switch: 1/60 (50), 1/100 (120),
1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10,000
RS232: 1/60 (50) ~ 1/100,000 (Variable at every H and clock)
Standard: 1/60 (50), 1/100 (120),
1/250 ~ 1/100,000
Extended: 1/7.5, 1/15, 1/30
(1/6.25, 1/12.5, 1/25)
N/A
1/60 (1/50) ~ 1/100,000
0.11 Lux @ F1.2, 50 IRE
0.07 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.10 Lux @ F1.2, 50 IRE
Gain:
Manual: 0 ~ 27dB
S/N Ratio:
Gamma:
Integration Hold:
Video Output:
Lens Mount:
Optical Filter:
Optical Center Accuracy:
Input Voltage:
Power Consumption:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight:
Field / Frame
2:1 Interlace
Internal / External (Auto Switching)
Electronic Iris:
Minimum Illumination:
Field
8.4 (H) x 9.8 (V) / 8.6 (H) x 8.3 (V)
0.60 Lux @ F1.2, 50 IRE
0.56 Lux @ F1.2, 50 IRE
1/30, 1/60 (50), 1/100 (120),
1/250 ~ 1/10,000
(8 steps)
1/60 (50), 1/100 (120),
1/250 ~ 1/10,000
(8 steps)
N/A
0.17 Lux @ F1.2, 50 IRE
0.17 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
0.13 Lux @ F1.2, 50 IRE
AGC / Fixed
(Software Selectable)
AGC / Fixed (POT Adjustable)
56dB (Gain 0dB)
>48dB (AGC Off )
>56dB (AGC Off )
0.45 / 1.0
Programmable via DSP
0.45 / 1.0
N/A
N/A
1.0Vp-p, 75Ω, DC Coupling
C-Mount
Yes, via Start/Stop TTL Signal, Vertical Reset
1.0Vp-p, 75Ω
CS / C (w/ adapter) / Micro Lens Mount
No IR cut filter
N/A
Position accuracy in H and V directions: ± 0.31mm
Rotational accuracy of H and V: ± 2.1 deg.
N/A
C-Mount
12Vdc ± 10%
7Vdc ~ +13Vdc
12Vdc ± 10%
< 1.8W; 150mA
< 1.0W, 83mA at 12Vdc
< 1.32W, 110mA ± 20%
-5⁰ ~ 50⁰C (14⁰ ~ 113⁰F)
-10⁰ ~ 45⁰C (14⁰ ~ 113⁰F)
-30⁰ ~ 65⁰C (-22⁰ ~ 149⁰F)
-30⁰ ~ 65⁰C (-22⁰ ~ 149⁰F)
-30⁰ ~ 60⁰C (-22⁰ ~ 140⁰F)
28 (W) x 28 (H) x 46.3 (D) mm
(1.1” x 1.1” x 1.82”)
26 (W) x 26 (H) x Var. (D) mm
(1” x 1” x Var.)
45 (W) x 45 (H) x Var. (D) mm
(1.77” x 1.77” x Var.)
12g (0.42oz)
45g (1.58oz)
52g (2.08oz)
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
93
Analog Series
Remote Head Color Models
Cased
Board
These cameras offer a remote head,
micro-packaged ¼”, color CCD with
a variety of cable lengths and head
orientations. Best of all, Sentech’s
remote head cameras are much
more reasonably priced than
conventional remote head
cameras.
NTSC / PAL
Finished Heads
STC-R640 / R645 1/4” CCD
Straight
CCD
STC-R640HD
NTSC / PAL
CCUs
STC-R640AS / R645AS
• Analog Control Knobs for DSP Control
The STC-R640 also comes in a board
level OEM remote head format. This
¼” color CCD camera is available
in three different options: R640,
R640C, and R645MC. These three
configurations will provide a
format perfectly suited for
OEM applications.
Gain, Color, Sharpness and Gamma
Models
1/4” CCD
STC-R640 / R645
• BNC for Video Out
• 12 Pin Hirose (Power & Y/C Out)
• Push-to-Set White Balance Switch
• RS232 Serial I/O for DSP Programming
• BNC for Video Out & Y/C Connector
Top of
Scene
•
•
•
Board CCU
Board CCD
Without mating cable
STC-R640C / R645C
Features
for Y/C Out
•
•
•
• 12 Pin Hirose (Power In, Y/C Out & HD/VD In)
STC-R640LHD
Features
STC-R640CC / R645CC
Right Angle
CCD
STC-R640 / R645
STC-R640CT / R645CT
• Terminal Strip Power
• Push-to-Set White Balance Switch
• RS232 Serial I/O for DSP Programming
• BNC for Video Out & Y/C Connector
Board CCU
Board CCD
Matting cable avaliable in 2, 3,
5 or 10 meters
for Y/C Out
STC-R640MC / R645MC
STC-R640HD2 / R645HD2
• BNC for VS Sync
Features
STC-R640UHD
* For accessories please see pages 98-100
Top of
Scene
STC-R640AS
94
STC-R640CC
•
•
•
R640MC / R645MC Board CCU
R640HD2 / R645HD2 Cased CCD
Detachable cable via 12pin Hirose
STC-R640CT
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
95
Specifications
Remote Head Color Models
Cased
Models
Image Sensor:
STC-R640
1/4” CCD (ICX228AK)
Horizontal Resolution:
Signal Format:
Vertical Frequency:
Minimum Illumination:
White Balance:
STC-R645
1/4” CCD (ICX228AK)
1/4” CCD (ICX229AK)
480 TV Lines
NTSC
PAL
2:1 Interlace
2:1 Interlace
30 fps
30 fps
768 (H) x 494 (V)
752 (H) x 582 (V)
768 (H) x 494 (V)
752 (H) x 582 (V)
15.734 kHz
15.625 kHz
15.734 kHz
15.625 kHz
50.00 Hz
59.94 Hz
59.94 Hz
50.00 Hz
AGC / Manual
AGC / Manual
> 48dB (AGC:Off )
> 48dB (AGC:Off )
0.45 (default), DSP Adjustable (32 steps)
0.45 (default), DSP Adjustable (32 steps)
S/N Ratio:
Sync:
1/4” CCD (ICX229AK)
PAL
Gain:
Gamma:
STC-R640
NTSC
Scanning Method:
Horizontal Frequency:
STC-R645
480 TV Lines
Frame Rate:
Effective Picture Element:
Board
Internal/External VS (CT model) / HD/VD (CC model)
1.99 Lux @ F1.2, 50 IRE
2.15 Lux @ F1.2, 50 IRE
Manual / Full Auto / Push-to-Set (CC and CT models only)
Internal/External VS
1.99 Lux @ F1.2, 50 IRE
2.15 Lux @ F1.2, 50 IRE
Manual / Full Auto / Push-to-Set
Serial I/O:
RS-232C Controllable (for DSP)
RS-232C Controllable (for DSP)
Electronic Shutter:
1/60 (1/50) ~ 1/10,000 (8 steps)
1/60 (1/50) ~ 1/10,000 (8 steps)
1/60 (1/50) ~ 1/10,000
1/60 (1/50) ~ 1/10,000
Electronic Iris:
DSP:
10-Bit, User Programmable
10-Bit, User Programmable
Composite and Y/C (select models)
Composite and Y/C
Video Output Level:
1.0Vp-p 75 Ω
1.0Vp-p 75 Ω
Y/C Output Level:
0.7Vp-p 75 Ω
0.7Vp-p 75 Ω
Video Output:
Lens Mount:
Input Voltage:
Power Consumption:
N/A
N/A
+ 12Vdc ± 10%
+ 12Vdc ± 10%
2.64W; 220mA
2.64W; 220mA
Operating Temperature:
-10° ~ 45°C (14° ~ 113°F)
-10° ~ 45°C (14° ~ 113°F)
Dimensions:
- Cased Camera CCU
- Straight Finished Head
51 (W) x 51 (H) x 55.5 (D) mm (2.04” x 2.04” x 2.22”)
10mm Ø (0.39” Ø)
45 (W) x 45 (H) x 14 (D) mm (1.77” x 1.77” x 0.55”)
8 mm Ø (0.31” Ø)
Cased Camera CCU: 190g (6.7 oz)
Board Camera CCU: 45g (1.58oz)
Weight:
www.SentechAmerica.com
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
97
Accessories
Lens Adapters
C-ADPTR LEN-R640-LC
C-Mount Adapter Ring for
CS-Mount Cameras (5mm)
C-Mount Adapter for STC-R640 Series
Micro Lens Mounts
Camera Cables
Camera Link® Cables
CAB-CL2M-MINI
CAB-CL3M-MINI
CAB-CL5M-MINI
CAB-CL10M-MINI
CAB-CL2M-M2M
CAB-CL3M-M2M
CAB-CL5M-M2M
CAB-CL10M-M2M
2m Standard to Mini Connector
3m Standard to Mini Connector
5m Standard to Mini Connector
10m Standard to Mini Connector
2m Mini to Mini Connector
3m Mini to Mini Connector
5m Mini to Mini Connector
10m Mini to Mini Connector
3m Digital Cable for Line Scan Cameras
10m Digital Cable for Line Scan Cameras
MV Hirose Cables
12W-2P
12W-02
12W-03
12W-05
12W-0.45
Power Cable with a 12 Pin Hirose and +/Power Spades
2m Cable w/ two 12 Pin Hirose Connectors
3m Cable w/ two 12 Pin Hirose Connectors
5m Cable w/ two 12 Pin Hirose Connectors
18” cable w/ two 12 Pin Hirose Connectors, male & female
USB Cables
CAB-USB-1.8
CAB-USB-2L
CAB-USB-1.8MB
CAB-USB-2LMB
6’ USB 2.0 Cable, A & B Connector
6’ USB 2.0 Lock Cable, A & B Connector
6’ USB 2.0 Cable, A & M (Mini Connector)
6’ USB 2.0 Lock Cable, A & M (Mini Connector)
Video Cables
12W-3.6PS
CAB-3BNC
CAB-6BNC
CAB-6Y/C
Lenses
Monochrome Board-Level Micro Lenses STC-130, 160, 170, E631
Model
Focal Length
F-Stop
LEN-B2.52.5mm F3.5
LEN-B3.63.6mmF5.0
LEN-B66.0mm F3.5
LEN-B88.0mm F2.0
LEN-B1616.0mm F1.8
Color Board-Level Camera Micro Lenses STC-600, N/P63
Model
Focal Length
F-Stop
LEN-C2.3
2.3mm F3.5
LEN-C2.7-C
2.7mm F2.0
LEN-C4-C4mmF3.5 LEN-C6-C6mmF2.0
LEN-C8-C8mmF2.0 Color Board-Level Camera Micro Lenses STC-N64/P64, N54/P54
Line Scan Cables
CAB-UFD3M
CAB-UFD10M
SEN TECH
1345 Valwood Parkway, Suite 320
Carrollton, TX 75006
12 Pin Hirose (Camera Side) & splits to
Y/C Out and Power on a Y split
3’ BNC to BNC, Shielded
6’ BNC to BNC, Shielded
6’ Y/C to Y/C (S-Video), Shielded
Custom Cables Available - Contact Sentech America for more details.
Model
LEN-N64 L2.0
LEN-N64 L2.3
LEN-N64 L3.0
LEN-N54 P2.9
LEN-N54 P3.7
Focal Length
2.0mm
2.3mm
3.0mm 2.9mm
3.7mm
F-Stop
F2.0
F2.7
F3.0
F2.9
F3.7
Remote Head Camera Link® Micro Lenses STC-RCL33A Series
Model
Focal Length
LEN-RCL33A-L3 3mm
LEN-RCL33A-L6 6mm
LEN-RCL33A-L16
16mm LEN-RCL33A-L3030mm
Color Remote Micro Head Camera Micro Lenses STC-R640 Series
Model
LEN-R640-L2.7
LEN-R640-L4
LEN-R640-L8
LEN-R640-M6.8
LEN-R640-L16
LEN-R640-L611
LEN-R640-L2511
Focal Length
2.7mm 4.0mm 8.0mm 6.8 mm Macro Lens
16mm 16mm 25mm F-Stop
F2
F2.5
F2.5
F15.2
F2.5
F11
F11
Speciality Remote Micro Head OEM Micro Lenses STC-R640 Series
LEN-PT47M1 F2.3, 4.7mm Super Micro Lens with Manual Iris
99
Accessories
1345 Valwood Parkway, Suite 320
Carrollton, TX 75006
Connectors
High Sensitivity Cameras
COM-HR10A-10P-12S
COM-HR10-10R-12P
12-Pin Hirose Connector, Cable
12-Pin Hirose Connector, Panel Mount
Digital Signal Processing
JIG-COLORUSB DSP Interface Jig for DSP Programming of all
Sentech cameras, connects via USB ports
SEN TECH
Many Sentech cameras are available with EXview High Sensitivity
CCDs. If your application or system could benefit by having an
excellent image quality with significantly less light, this product
set will be interesting to you.
Cased Level, Color CCD Cameras (NTSC or PAL)
Models
Minimum Illumination
See Pages
STC-H620/H625
STC-H630/H635
0.34/0.23 Lux @ F1.2, 20 IRE
0.26/0.22 Lux @ F1.2, 20 IRE
81
81
Board Level, Color CCD Cameras (NTSC or PAL)
Power Supplies
45-601
STC-121A
PWR-DC12-500R
PWR-PSI450-6
PWR-PSISP-6
PWR-PSISP-6YC6
Models
Minimum Illumination
See Pages
STC-H620/H625
STC-H630/H635
0.34/0.23 Lux @ F1.2, 20 IRE
0.26/0.22 Lux @ F1.2, 20 IRE
87
87
Cased Level, Monochrome CCD Cameras (EIA or CCIR)
Regulated 12V DC, 1.5amps, 100-240V AC Input with Jack Connector
Regulated 12V DC, 1.2 amps with Jack Connector
12V DC Supply 500mA with Jack Connector
12V DC Supply with 6 Pin Hirose Connector for
Camera Link®
12V DC Supply with 12 Pin Hirose
12V DC Supply with 12 Pin Hirose Connector In,
Y/C Connector Out
Models
Minimum Illumination
See Pages
STC-HE42A/HC42A
STC-HE43A/HC43A
STC-H170/H175BC
STC-H172/H177BC
0.04/0.01@ F1.2, 20 IRE
0.01/0.01@ F1.2, 20 IRE
< 0.01 Lux @ F1.2, 20 IRE
< 0.01 Lux @ F1.2, 20 IRE
90
90
91
91
Board Level, Monochrome CCD Cameras (EIA or CCIR)
Models
Minimum Illumination
See Pages
STC-H170/H175
STC-H172/H177
< 0.01 Lux @ F1.2, 20 IRE
< 0.01 Lux @ F1.2, 20 IRE
91
91
Remote Head Monochrome CCD Cameras (NTSC or PAL)
Tripod Mounts
Models
Minimum Illumination
See Pages
STC-HR170
0.01 Lux @ F1.2, 20 IRE
91
We Like
Turtles!
TP-300 Tripod Mount for STC-400 and STC-1000 Series
Cameras
TP-HCA
Camera Mount for Analog Cube Cameras and
Camera Link® Cameras, includes 6 mounting
screws
100
Tele: (972) 481-9223; Toll Free (US): (877) 736-8324
www.SentechAmerica.com
101
Sentech Europe
Notes
Sensor Technologies is excited to announce the opening of
the new Sensor Technologies Europe office in Rödermark,
Germany. The German office, located 22km southeast of
Frankfurt, is part of Sentech’s international expansion to help
support its growing client base in Europe.
Sentech recognizes the importance of having an office in
Europe. From this centralized location in Germany, we will
be able to provide superior customer service and technical
support. This allows Sentech to build even stronger
relationships with our European customers.
Sentech’s new European office is scheduled to launch at the
beginning of July 2012. For further information, please contact
Adam Westcott at adamwestcott@sentechamerica.com.
Sensor Technologies Europe, LLC
Carl-Zeiss-Straße 37, Floor 3
63322 Rödermark, Germany
COMING SOON!
www.SentechEurope.com
Adam Westcott
International Branch
Manager
Sam Aimono
Technical Manager
Michelle Westcott
Office Manager
Sensor Technologies America, Inc.
1345 Valwood Parkway, Suite 320
Carrollton, TX 75006
102
www.SentechAmerica.com
972-481-9223 • Telephone
877-736-8324 • US Toll Free
972-481-9209 • Fax
SEN TECH
Sensor Technologies America, Inc.
1345 Valwood Parkway, Suite 320
Carrollton, Texas 75006 USA
RETURN SERVICE REQUESTED
prsrt std
us postage
paid
dallas tx
permit no 1

Similar documents

sentech - Laser Components

sentech - Laser Components Sentech’s IR transit camera was designed specifically for the public transportation industry. It uses special IR illumination that resolve two big problems on trains or buses, “hot spots” on close-...

More information

SENTECH

SENTECH Introduction to Sentech

More information