Insulation Solutions - Whole of House

Transcription

Insulation Solutions - Whole of House
Insulation Solutions
The Offer
• Insulation solutions for the entire building envelope
• Roofs
• Ceilings
• Walls
• Framed floors
• Multiple brands (Batts & Foil Products)
• Helps achieve a 6-Star energy rating
• Australian Standards compliant (AS/NZS 4859.1)
The Brands
Insulation Batts
Foil Insulation
Wall
Ceiling
Acoustic Partition
Underfloor
Australia’s safest Insulation
– Made from 100% polyester recycled fibres
– Will not degrade, rot or fall apart
– Non-itchy
– No PPE required
– No lingering fibres or respiratory concerns
– Non carcinogenic
– No harmful VOCs
Easy to install
– No special tools
– Easily torn across width of product
– Can be installed by any trade
Fast to install
– No special site preparation
– Can be installed at the same time as other
works
– No quarantine requirements
– No hazardous waste or special clean up
Cheaper to install
Australian made & owned
Complies with Australian Standards and BCA
ISO 9001 quality standards
Walls, Ceilings and Under floors.
Available in Batts or Rolls.
Leaders in Thermal and Acoustic polyester
insulation
• 3-in-1 Insulation, Weather Barrier
and Moisture Management
• Great Thermal Performance
• Helps achieve 6 star energy rating
• Easy To Install
• Fibre Free
• Allergy Safe
• Suitable for Bushfire Prone Areas
• Extra Heavy Duty & Medium Duty
• Pre-shrunk minimises shrinkage
after installation
• Thermal Break
• Permeable Wall Wraps
Australia’s No. 1 Trusted Insulation Brand*
100% Australian-made
Leading brand since 1997
Industry-leading technical support services
Physical cross-link, not chemical
CodeMark-certified for BCA compliance
CM20029
Roofs
Walls
* Infolink Top Trusted Brand Survey 2012
Underfloor
Metal Roof Insulation- Foil
<10kg
• Metal roof insulation
CM20029
• Kingspan AIR-CELL Insulbreak® 65
• 3-in-1 insulation, vapour barrier, thermal break
• Thermal break compliance for steel framed
roofs and also suitable for timber framed roofs
Metal Roof Insulation - Foil
4 Ametalin ThermalBreak 8™
Meets NCC/BCA R0.2 thermal break
requirement in steel framed roofs.
Also suitable for timber framed roofs.
4 SILVERSARK® xR EXTRA R-VALUE
Up to R0.4 Extra R-value
4 SILVERSARK® MULTI-PURPOSE
Extra Heavy Duty
Products Flammability Index (LOW):
Suitable for Bushfire-Prone Areas
Bush Fire Attack Levels
BAL-LOW to BAL-40.
Metal Roof Insulation- Blanket
 R-1.3 55mm 1.2m x 15m foil faced
heavy duty under metal roof blanket
insulation.
 High performance thermal insulation
for under metal roofs.
 High absorption of sound.
 Anti-condensation.
Tile Roof Insulation- Foil
<10kg
11kg
• Tile roof insulation
CM20029
• Kingspan AIR-CELL Insulbreak® 55 / Glareshield®
• 3-in-1 insulation, vapour barrier, radiant barrier
• Extra protection from leaks from broken tiles
Tile Roof Insulation - Foil
4 Ametalin ThermalBreak 8™
Meets NCC/BCA R0.2 thermal break
requirement in steel framed roofs.
• Also suitable for timber framed roofs.
4 SILVERSARK® xR EXTRA R-VALUE
Up to R0.4 Extra R-value
4 SILVERSARK® MULTI-PURPOSE
Extra Heavy Duty
Products Flammability Index (LOW):
Suitable for Bushfire-Prone Areas
Bush Fire Attack Levels
BAL-LOW to BAL-40.
Ceiling Insulation- Batts
Ceiling Insulation
 R-2.5 125mm through to R-6.0 275mm for superior
thermal insulation.
 Available in both 430mm and 580mm widths and
suitable for timber and steel framed roofs.
 Reduces noise transmission.
 High compression packing means more metres
per pack, less space onsite required to store and
fewer loads to the job site.
Ceiling Insulation – Batts
Designed for Australian conditions
Complete range from R2.5 to R4.5
Easy to fit 430mm and 580mm widths
Thermal batts assist in reducing sound
Light weight packs for easy handling
Quick to install without gloves or masks
Non-itchy
No messy fibres
No PPE needed
Gets the job done in half the time
Brick Veneer Wall Insulation- Foil
<10kg
• Brick veneer wall insulation
CM20029
• Kingspan AIR-CELL Permicav®
• 3-in-1 insulation, vapour-permeable membrane, radiant barrier
• Reduces condensation risk
Brick Veneer Wall Insulation
Ametalin ThermalBreak 8TM
• Meets NCC/BCA requirements for material R-value of
R0.2 for a thermal break for steel framed construction.
Also suitable for timber framed construction.
• 3-in-1 thermal break, insulation and weather barrier
Traditional Wall Wraps
• SILVERSARK®xR
EXTRA R VALUE
Up to R0.4 Extra R-value
• SILVERWRAPTM
Medium Duty
Vapour Permeable Membranes
• SILVERBRANE HPTM
HIGH PERMEANCE
Extra R-value Permeable Membrane
• BRANE® VHP
VERY HIGH PERMEANCE
2.7m wide, reduces install time.
Products suitable for Bushfire-Prone Areas.
Cladded Wall Insulation- Foil
<10kg
• Cladded wall insulation
CM20029
• Kingspan AIR-CELL Permishield®
• 3-in-1 insulation, vapour-permeable sarking, thermal break
• Reduces condensation risk
• Thermal break compliance for steel-framed walls and also
suitable for timber-framed walls
Cladded Wall Insulation- Foil
Ametalin ThermalBreak 8TM
• Meets NCC/BCA requirements for material R-value of
R0.2 for a thermal break for steel framed construction.
Also suitable for timber framed construction.
• 3-in-1 thermal break, insulation and weather barrier
Traditional Wall Wraps
• SILVERWRAPTM
Complies with specifications:
Medium or Low Barrier, High Water Barrier
• SILVERWRAPTM BREATHER
Vapour Permeable Membranes
• SILVERBRANE HPTM
HIGH PERMEANCE
EXTRA R-VALUE
• BRANE® VHP
VERY HIGH PERMEANCE
2.7m wide rolls cuts installation time
Custom Printing for Trade
Advertise your business
•
Custom printed sarking and wall wrap
•
Minimum order quantity 80 rolls
•
Delivery approx. 3-4 weeks from artwork approval
Wall Insulation- Batts
 R-1.5 75mm through to R-2.7 90mm
 R-1.5 and R-2.0 available in both 430mm and
580mm widths for timber frame buildings and
450mm and 600mm for steel frame buildings
 R-2.5HD and R-2.7HD available in both 430mm
and 580mm widths.
 High compression packing means more metres
per pack, less space onsite required to store and
fewer loads to the job site.
Wall Insulation – Thermal batts
Designed for Australian conditions
Complete range from R1.5 to R2.5 (90mm)
Easy to fit 430mm and 580mm widths
Acoustic and Thermal batts
Light weight packs for easy handling
Quick to install without gloves or masks
Non-itchy
No messy fibres
No PPE needed
Gets the job done in half the time
Wall Insulation- Acoustic Batts
 11kg/m2, 14kg/m2, 18kg/m2, 20kg/m2 and 28kg/m2
acoustic insulation
 Reduce airborne sound transmission
(e.g. through partition walls)
 reduce impact sound transmissions
(e.g. through upper floors)
 reduce sound reverberation in specialist environment
(e.g. recording studios)
Wall Insulation – Acoustic batts
Designed for Australian conditions
Complete range from R1.5 to R2.5
Select from extensive commercial range
– Acoustisorb®
– Nova®)
610 wide rolls (430/580 upon request)
Light weight packs for easy handling
Quick to install without gloves or masks
Non-itchy
No messy fibres
No PPE needed
Gets the job done in half the time
Wall Insulation: Pleated Foil Batts
4
PLEATED SILVERBATTS™
• BETWEEN STUDS
• FIBRE FREE BATTS
• ANTI-CONDENSATION
• NON-ABSORBENT
• COST EFFECTIVE
• Compact, less space required for on-site storage
12 m² to pack size 45mm x 65mm x 1200mm
• High system R-values:
2 x PLEATED SILVERBATTS™ up to R3.0 in-situ
Delete plan take off Top RH Corner
Double Brick Wall Insulation- Foil
• Cavity wall insulation
• Kingspan AIR-CELL Permicav®
• 3-in-1 insulation, vapour-permeable
membrane, radiant barrier
• Reduces condensation risk
<10kg
CM20029
Double Brick Wall Insulation - Foil
4
Ametalin ThermalBreak 8™
Typical Total System R-values
Winter R2.1 Summer R2.0
Low-cost solutions:
4 SILVERSARK® xR EXTRA R-VALUE
Typical Total System R-values
Winter R2.0 Summer R1.8
4
SILVERBRANE HPTM HIGH PERMEANCE
EXTRA R-VALUE PERMEABLE MEMBRANE
Typical Total System R-values
Winter R2.0 Summer R1.8
Sub-Floors- Foil
• Suspended framed floor
insulation
• Kingspan AIR-CELL Permifloor®
• 2-in-1 insulation and waterpermeable moisture management
system
• Allows excess moisture to drain
• Available in 500 mm widths for
quick and easy installation between
timber-framed floor joists
<10kg
CM20029
Sub-Floors - Foil
Suspended framed floor insulation
The most economical double
sided reflective insulation product
on the market.
• 2-in-1 insulation and moisture
management system for sub-floors
• Allows excess moisture to drain
• 500 mm wide for quick easy installation
between framed floor joists
• 1200 mm wide for installation under or
over framed floor joists
Typical Total System R-values
Winter R3.6 Summer R1.5
Add product shot here
Underfloor- Batts
 R-2.1 available in both 480mm and 610mm
widths for both new and retrofit buildings.
 Reduces heat loss through floors and assists
in reducing drafts through joins in the floor
structure.
 High compression packing means more metres
per pack, less space onsite required to store and
fewer loads to the job site.
Underfloor - Batts
Designed for Australian conditions
Complete range from R1.5 to R3.0
Easy to fit 430mm and 580mm widths
Stops drafts as well as noise
Light weight packs for easy handling
Quick to install without gloves or masks
Non-itchy
No messy fibres
Ideal for close up work
No PPE needed
Gets the job done in half the time
Multi Purpose- Batts
Multi Use Roll Insulation
 R-2.0 available in both 430mm and 580mm
widths. 19m long.
430mm Wide
 Designed for handy ceiling top up and wall
insulation and are great for odd jobs around the
house.
580mm Wide
Accessories - Foil
4
Ametalin Cavity Spacers™
•
Helps maintain reflective air spaces between
insulation and building materials in walls
•
Pack of 50 foam spacers
Ametalin Insulation/Ducting Tape™
4
•
•
•
•
Superior adhesion for effective sealing of joins
Extreme temperature resistance, withstands
-40°C to 127°C in service
Adheres to wet non-porous substrates
Higher immediate tack than traditional
cloth duct tapes
Accessories- Foil
• Tape
• Two widths available: 48 mm or 72 mm
• Reinforced foil tape
• For effective vapour sealing of joins
• Spacer Biscuits™
• Pack of 50 foam spacers
• 20 mm thick
• Assists in maintaining adequate reflective air
spaces in wall applications
Technical Support- Batts
Technical Support
Dedicated Tech Support (on website)
The Knauf Insulation website has a dedicated
section where you can find technical information
and datasheets to help you and your business:
www.knaufinsulation.com.au/tech.aspx
Or you can Email enquiries to:
tech.au@knaufinsulation.com
The Knauf Insulation website is also a great
reference for any information you need on
EarthWool.
General Website
www.knaufinsulation.com.au
Technical Support- Batts
Tontine Insulation provides extensive technical
support including:
– Detailed Technical Data Sheets
– Telephone and Email support
– Acoustic and Thermal Design Guides for
various building systems
– Application Guides and How To Specify
– How to Install
– Quick Product Selectors
– Independent test reports and accreditation
– Comprehensive website with technical
information and data sheets.
Contact us to discuss your next project.
PHONE:
1300 INSULATION
EMAIL:
customercare@tontineinsulation.com.au
WEB:
www.tontineinsulation.com.au
Technical Support - Foil
A full suite of Technical Support to assist
with your enquiries
- Technical services support via phone
- Product Quick Guide & samples
- Technical Data Sheets
- Brochures
- Thermal Performance Calculations
- Solutions for BCA Deemed-to-Satisfy (DIS) requirements
- Design support for building systems and How to specify
- Independent Test Reports in compliance
with AS/NZS 4859.1:2006
- Support and training via appointment
Phone:
08 8347 0941
Email:
support@ametalin.com
Website: www.ametalin.com
Technical Support- Foil
•
•
•
•
•
•
•
•
Industry-leading technical services
Thermal performance calculations
Condensation risk analysis
On-site installation training
Instructional videos
Solutions and advice for BCA
Deemed-to-Satisfy (DtS) requirements
CAD & PDF drawings online
All product datasheets and application
guides online
Technical Services
Call 1300 247 235 > Option 2
technical@kingspaninsulation.com.au
www.kingspaninsulation.com.au
Product Summary - Finelines
I/N
Description
I/N
Description
810333
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R4.0 195X430 PK 18
810605
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R5.0 210X580 PK11
810331
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R3.5 175X430 PK 21
810606
810335
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R4.0 195X580 PK 18
810890
INSULATION ROLL G/WOOL KNAUF-EARTHWOOL R2.0 90X430MM E4385
810965
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R6.0 275X430 PK11
INSUL BATTS WALL G/WOOL KNAUF-EARTHWOOL R2.7SHD 90X430
PK10
INSUL PANEL UNDER FLOOR KNAUF-EARTHWL R2.1 75X610X1160 PK14
810602
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.5HP 90X430 PK14
810593
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.0 75X580 PK20
810597
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.0 75X450 PK20
810332
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R3.5 175X580 PK 21
810594
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R1.5 75X450 PK42
810324
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R2.0 90X430 PK 32
810985
INSUL SPACE BLANKET EARTHWOOL-R1.8 75MM UNDER ROOF
810891
INSULATION ROLL G/WOOL KNAUF-EARTHWOOL R2.0 90X580MM E4386
810584
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.3 50X430 PK38
810585
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.3 50X580 PK38
810598
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.0 75X600 PK20
810591
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.9 75X450 PK24
810976
810887
INSUL BLANKET UNDER ROOF KNAUF-R1.3 55MM EARTHWOOL SPACE
810322
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R1.5 75X430 PK 42
810603
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.5HP 90X580 PK14
810592
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.9 75X600 PK24
810325
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R2.0 90X580 PK 32
810982
INSUL ACOUSTIC EARTHWOOL KNAUF-11KG 600X75X2700MM PK14
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R1.5 75X580 PK 42
810595
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R1.5 75X600 PK42
810329
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R3.0 145X430 PK 23
810590
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.3 50X600 PK38
810330
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R3.0 145X580 PK 23
810979
INSUL ACOUSTIC EARTHWOOL KNAUF-11KG 450X50X2700MM PK20
810966
INSUL PANEL UNDER FLOOR KNAUF-EARTHWL R2.1 75X480X1160 PK17
810980
INSUL ACOUSTIC EARTHWOOL KNAUF-11KG 600X50X2700MM PK20
810604
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R5.0 210X430 PK11
810587
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.9 75X580 PK24
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R2.0 75X430 PK20
810981
INSUL ACOUSTIC EARTHWOOL KNAUF-11KG 450X75X2700MM PK14
810328
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R2.5 125X580 PK 30
810589
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.3 50X450 PK38
810607
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R6.0 275X580 PK11
810586
810327
INSULATION BATTS G/WOOL KNAUF-EARTHWOOL R2.5 125X430 PK 30
810977
INS BATTS ACOUSTIC GWOOL KNAUF-EARTHWOOL R1.9 75X430 PK24
INSUL BATTS WALL G/WOOL KNAUF-EARTHWOOL R2.7SHD 90X580
PK10
810323
810608
Product Summary - Finelines
I/N
810184
810185
810186
810187
810188
810189
810190
810191
810192
810193
810194
810195
810196
810197
810199
810200
810201
810202
810614
810615
810616
810617
810618
810620
DESCRIPTION
I/N
DESCRIPTION
INSULATION BATTS POLY TONTINE++R1.5 1160X430MM PK16
INSULATION BATTS POLY TONTINE++R1.5 1160X580MM PK16
INSULATION BATTS POLY TONTINE++R2.0 1160X430MM PK16
INSULATION BATTS POLY TONTINE++R2.0 1160X580MM PK16
INSULATION BATTS POLY TONTINE++R1.5 ACOUSTIC 1160X430MM
PK16
INSULATION BATTS POLY TONTINE++R2.0 ACOUSTIC 1160X430MM
PK12
INSULATION BATTS POLY TONTINE++R2.0 ACOUSTIC 1160X580MM
PK12
INSULATION BATTS POLY TONTINE++R2.5 ACOUSTIC 1160X430MM
PK8
INSULATION BATTS POLY TONTINE++R2.5 ACOUSTIC 1160X580MM
PK8
INSULATION BATTS POLY TONTINE++R2.5 1160X430MM PK12
INSULATION BATTS POLY TONTINE++R2.5 1160X580MM PK12
INSULATION BATTS POLY TONTINE++R3.0 1160X430MM PK12
INSULATION BATTS POLY TONTINE++R3.0 1160X580MM PK12
INSULATION BATTS POLY TONTINE++R3.5 1160X430MM PK8
INSULATION BATTS POLY TONTINE++R3.5 1160X580MM PK8
INSULATION BATTS POLY TONTINE++R4.0 1160X430MM PK8
INSULATION BATTS POLY TONTINE++R4.0 1160C580MM PK8
INSULATION BATTS POLY TONTINE++R1.5 ACOUSTIC 1160X580MM
PK16
INSULATION BATTS POLY TONTINE++R4.5 THERMAL 430X116CM PK6
810624
810621
810622
810623
810628
810629
INSULATION BATTS SOUNDBATT++45CM 16.2M ROLL PK4 TSB4
INSULATION BATTS ACOUSTIC++PARTITION 45CM 24.3M RL PK4
INSULATION BATTS SOUNDBATT++45CM 16.2M ROLL PK4 TSB3
INSULATION BATTS SOUNDBATT++61CM 16.2M ROLL PK2 TSB3
INSULATION BATTS SOUNDBATT++61CM 13.5M ROLL PK2 TSB5
INSULATION BATTS ACOUSTIC++60-120CM CEILING BAGGLE PK8
810630
INSULATION BATTS ACOUSTISORB1++120CMX15MX25MM ROLL PK1
810631
INSULATION BATTS ACOUSTISORB1++120CMX10MX50MM ROLL PK1
810632
INSULATION BATTS ACOUSTISORB2++120CMX15MX25MM ROLL PK1
810633
INSULATION BATTS ACOUSTISORB2++120-240CM 50MM SHEETS PK5
810634
810636
810637
810638
810639
810640
810641
810642
810644
INSULATION BATTS ACOUSTISORB2++120CMX8MX50MM ROLL PK1
INSULATION BATTS ACOUSTISORB2++120-240CM 75MM SHEETS PK3
INSULATION BATTS ACOUSTISORB2++120-240CM 100MM SHEETS PK3
INSULATION BATTS ACOUSTISORB3++120CMX10MX25MM ROLL PK1
INSULATION BATTS ACOUSTISORB3++120-240CMX50MM SHEETS PK3
INSULATION BATTS ACOUSTIC++30MMX120CM 15M NOVA ROLL PK1
INSULATION BATTS ACOUSTIC++50MMX61CM 10M NOVA ROLL PK2
INSULATION BATTS ACOUSTIC++65MMX61CM 10M ROLL PK2
INSULATION BATTS ACOUSTIC++75MMX61CM 10M ROLL PK2
810645
INSULATION BATTS ACOUSTIC++100MMX61CM 7M ROLL PK2
INSULATION BATTS POLY TONTINE++R4.5 THERMAL 580X116CM PK
6
INSULATION BATTS POLY TONTINE++R1.5 UNDERFLR THERMAL
ROLL 2PK
INSULATION BATTS POLY TONTINE++R2.0 UNDERFLR THERMAL
ROLL 2PK
INSULATION BATTS POLY TONTINE++R3.0 THERMAL ROLL
43CMX6.9M
INSULATION BATTS ACOUSTIC++PARTITION 61CM 24.3M RL PK2
810843
INSULATION BATTS ACOUSTIC NOVA++30MMX61CM 15M ROLL PK2
435062
Product Summary - Finelines
ITEM No.
BARCODE
PRODUCT
DIMENSIONS
0810967
:9339338001252
AMETALIN THERMALBREAK 8™
1350mm x 22.25m x 8mm (30m2)
PRODUCT CODE
TB8-30
0810983
:9339338001269
AMETALIN THERMALBRANE 6.5™ (WA ONLY)
1350mm x 22.25m x 6.5mm (30m2)
TB6-30
0810963
:9339338000866
SILVERSARK® xR EXTRA R-VALUE
1350mm x
60m (81m2)
XHD-XR-81
0810964
:9339338000859
SILVERSARK® xR EXTRA R-VALUE
1500mm x
30m (45m2)
XHD-XR-45
0810107
:9339338000002
SILVERSARK® MULTI-PURPOSE
1350mm x 60m (81m2)
ETXHD-81
0810356
:9339338000040
SILVERSARK® MULTI-PURPOSE
1500mm x
30m (45m2)
ETXHD-45
0810370
:9339338000279
SILVERSARK® MULTI-PURPOSE
1200mm x 60m (72m2)
ETXHD-72
0810108
:9339338000019
0810357
:9339338000057
0810104
:9339338000064
0810479
:9339338000170
0810105
:9339338000071
0810480
:9339338000187
0811008
SILVERSARK® PREMIUM WALL WRAP BREATHER
1350mm x
60m (81m2)
ETXHD-81-B
SILVERSARK® PREMIUM WALL WRAP BREATHER
1350mm x 30m (45m2)
ETXHD-45-B
SILVERWRAPTM WALL WRAP
1350mm x
60m (81m2)
TMD-81
SILVERWRAPTM WALL WRAP
1350mm x 30m (40m2)
TMD-40
SILVERWRAPTM WALL WRAP BREATHER
1350mm x
60m (81m2)
TMD-81-B
SILVERWRAPTM WALL WRAP BREATHER
1350mm x 30m (40m2)
TMD-40-B
:9339338001023
BRANE® VHP WALL WRAP PERMEABLE MEMBRANE
2740mm x
0811009
:9339338001061
SILVERBRANE HPTM
REFLECTIVE VAPOUR PERMEABLE WALL WRAP
1350mm x 60m (81m2)
HP-81
0810225
:9339338000705
PLEATED SILVERBATTSTM
1200mm x 450mm
PB-450
0810226
PB-600
30m (82m2)
:9339338000729
PLEATED SILVERBATTSTM
1200mm x 600mm
0810125
:9339338000248
SILVERFLOOR 500TM
500mm x 60m (30m2)
0810892
:9339338000408
SILVERFLOOR 1200TM
1200mm x
0810227
:9339338000781
Ametalin INSULATION/DUCTING TAPE
50mm x 50m
60m (72m2)
BRANE-VHP-82
SF-30
SF-72
IDT-5050
Product Summary - Finelines
PRODUCT
PRODUCT
CODE
DIMENSIONS
FINELINE
Kingspan AIR-CELL Insulbreak® 55
TB055
1350mm x 22.25m (30m2)
0810141
Kingspan AIR-CELL Insulbreak® 65
TB065
1350mm x 22.25m (30m2)
0810140
Kingspan AIR-CELL Permishield® 65
PS065
1350mm x 22.25m (30m2)
0810142
Kingspan AIR-CELL Permicav®
PS055
1350mm x 22.25m (30m2)
0810823
PSW040
1350mm x 22.25m (30m2)
0810204
PSW040500
2 x 500mm x 30m (30m2)
0810297
Kingspan AIR-CELL Glareshield®
WA004
1350mm x 22.25m (30m2)
0811063
Kingspan AIR-CELL ® Tape (48 mm)
WA005
48mm x 50m
0813463
Kingspan AIR-CELL ® Tape (72 mm)
WA006
72mm x 50m
0818049
Pack of 50
0813502
Kingspan AIR-CELL Permifloor®
Kingspan AIR-CELL Permifloor® 500
Kingspan AIR-CELL ® Spacer Biscuits™
-
Can we help ?
Bunnings welcome the opportunity to quote your next job.
Please contact your local Bunnings representative or call 133 062.