Brochure LINER Swathers

Swathers
LINER
Perfectly coordinated –
forage harvesting from CLAAS.
For daily agricultural operations, you need more than just
robust machinery; you need technology that works and is
quite simply a pleasure to work with – reliable technology that
works in unison when the going gets tough and when there
seems to be no end in sight. And, what's more, you need
harvesting systems that piece together seamlessly.
As a leading equipment manufacturer of forage harvesting
machinery, CLAAS provides the ideal harvesting chain for any
farm or business size. Our coordinated machines support you
in your day-to-day operations and enable you to achieve
optimal results in forage harvesting.
liner.claas.com
2
LINER
3
LINER.
4
Contents
Technology
6
Technical details
8
Ground protection
10
Easy operation
12
Four-rotor swathers
16
LINER 4000 / 3600
18
Dual-rotor swathers
(central swath laying)
22
LINER 3100
24
LINER 2900 / 2800 / 2700 / 2600
26
Dual-rotor swathers
(side swath laying)
28
LINER 1750 / 1650 TWIN
30
LINER 1250 PROFIL
32
LINER 800 TWIN / 700 TWIN
34
Single-rotor swathers
36
LINER
550 T / 500 T / 450 T / 370 T /
500 PROFIL / 450 / 420 / 370
38
Harvesting quality
43
Service
44
Specifications
47
5
A study in motion.
6
Technology
Successful technology begins with solid groundwork.
With their high-quality design and construction, the
machines in the LINER range offer optimum
functionality and efficiency.
7
Runs like clockwork.
Driving instead of lubricating –
the continuously lubricated rotor housing.
The LINER drive concept.
All LINER models have a reliable, fully external drive train with
Swathing with no interruptions – that's the top priority for the
a sophisticated transmission ratio at an easily accessible
LINER, so only components that can meet the highest
height. The power of the main drive is distributed to the rotors
standards are installed. The unique operating reliability and
via an auxiliary gearbox. An overrun function is integrated as
robust design of the LINER make it the automatic choice for
standard and all rotors are individually protected against
the forage harvesting team.
overload. The LINER requires very little maintenance, with a
250-hour lubrication interval for the universal joints on the
The swathing transmission is located in a solid cast housing
drive shafts, and a 50-hour lubrication interval for the tractor
(rotor dome assembly), which is filled with oil and hermetically
drive shaft.
sealed. This means the core component of the LINER is
protected from dirt entering, and is therefore maintenancefree. The cam rollers operate smoothly in an oil bath. This
perfect frictionless operation guarantees maximum service life.
8
Technical details
The CLAAS long-running cam track.
High performance under all conditions – its spheroidal
graphite iron construction gives the cam track the strength
required to withstand any load. The large diameter and the
gentle rise of the cam track ensure that the thrust forces from
the turning momentum are minimised. As a result, the tine
arms operate smoothly, giving a clean raking action without
material fatigue, even during periods of prolonged use.
Sturdy tine arms.
Easy with PROFIX.
The tine arms are extremely stable, thanks to the large tube
The PROFIX easy-release bracket for the tine arms makes
diameter and the high-strength structural elements. If a
attachment and removal a very straightforward task. The
collision occurs, the tine arms snap off at a set bending point,
multiple grooves on the tine arms allow them to be attached
and can then be simply replaced using the bracket. Since the
with zero play, which means there is also no wear. There are
set bending points are outside the rotor housing, the latter is
marker arrows that clearly show the seating position. If
not damaged. The stable positioning of the tine bars protects
necessary, all the components in the PROFIX tine arm bracket
the cam rollers, reducing both horizontal and vertical loads.
can be quickly and inexpensively replaced.
Depending on the model and the size of the tine arms, these
feature two or three support points. The slide bearings on the
tine arms are extra-large and wear-resistant.
The more economical version.
Low-friction transmission: some of the smaller models are
equipped with a simpler rotor housing. But even here, the
steel cam rollers run in an oil bath for continuous lubrication,
while the cast housing is hermetically sealed and
maintenance-free. The tine arms also fit snugly with a lemon
profile.
If a collision occurs, the tine arms snap off at a set
bending point, preventing any serious damage.
The long-lasting cam tracks made of spheroidal
graphite ensure maximum operating reliability under
all conditions.
In the low-friction transmission, the cam rollers
likewise run in an oil bath for continuous lubrication.
9
GRASS CARE –
for top-quality forage.
Fully floating rotor suspension
Six-wheel chassis: with extra tandem axles and
trailing wheels for precise ground-contour tracking
Up to 70 cm lifting height for ease of turning at
headlands
Contour tracking is three-dimensional, clean
and fast.
Full raising and lowering in professional
fashion.
GRASS CARE at CLAAS stands for top forage quality, even
When folding in the transport position, or raising in headland
under difficult conditions or at high working speeds. For that
position, the rotors are raised parallel to the ground before
reason, depending on the particular model, the LINER
being inclined inwards. This ensures that the finished swath is
includes various details to ensure that standards remain high:
not destroyed by any rotating tines. During lifting, the front
rotors are lifted first, whereas during lowering, the rear chassis
−− Fully floating rotor suspension facilitates exact groundcontour following: three-dimensional adjustment to ground
wheels are set down before the front ones, so that the tines
cannot catch in the ground and the forage stays clean.
contours parallel and transverse to the direction of travel
(+/– 15°). The rotors are free to move independently of the
The headland lift height of up to 70 cm even allows you to
chassis.
drive over the largest swaths with ease. CLAAS thus offers the
−− An optional castor guide wheel can be fitted with no tools
required.
−− The tines always stay parallel to the ground, ensuring raking
remains clean at any speed.
−− Contour chassis for smooth operation and precise rotor
guidance: four- or six-wheel rotor running gear, large tyres
and steered trailing axles.
−− Accurate gauging of the ground profile over the full working
width by placing the wheels close to the circle of rotation of
the tines.
10
maximum lift height for convenient turning at the headland.
Ground protection
11
Convenience for routine work tasks.
Scale for height adjustment
12
Effortless setting of raking width
Easy operation
Extremely manoeuvrable.
The maximum steering lock is shown by a marking on the
drawbar. This makes the LINER extremely agile, and allows
you to manoeuvre flexibly.
Safe transportation under 4.00 metres.
All models with a rotor diameter of up to 3.80 metres have a
transport height of less than 4.00 metres, without removing
the tine arms. With the four- and dual-rotor swathers, the
rotors are retracted hydraulically from the tractor after folding
via a double-acting spool valve, and then secured for
transport with a mechanical or hydraulic locking mechanism.
The LINER models have extremely stable driving
characteristics, thanks to their lower centre of gravity – even at
We keep things neat and tidy.
top speeds of up to 50 km/h. The LINER models are also
fitted with warning signs and lighting to give an enhanced level
A jack that is safe and easy to operate, a handy stowage
of safety.
space for the drive shaft and comfortable brackets for the
hydraulic lines and cables keep things neat and tidy when the
We create space – the inverted U-frame.
swather is parked. The hose supports are pivot-mounted,
guaranteeing that the control lines to the tractor are secure
and well protected. The drive shaft has ample space to move,
All LINER machines fit onto the lower linkage points on the
easily allowing a steering lock angle of up to 80°.
tractor with an open mounting block that uses a sturdy
inverted U-frame. This ensures not only that they can be
quickly put to use, but also that they remain stable and
Staying flexible.
reliable.
Both the working height and the raking width can be
conveniently adjusted. For example, there is a scale on the
telescopic booms to help adjust the raking width. The scale
on the the central chassis beam can also be used to check
the working height and adjust it as required.
13
CLAAS terminals.
Everything under control.
The short harvest periods available for silage preparation call
for very high-performance harvesting technology. Needless to
say, one element of this technology is ensuring that operation
is intuitive and reduces the driver's workload. In models that
require a terminal, there is a choice between the CLAAS
STANDARD TERMINAL (CST), the new CLAAS OPERATOR or
the ISOBUS-capable COMMUNICATOR II. The ISOBUScapable machines can also be controlled from any external or
tractor-mounted ISOBUS terminal. With the mobile S10
terminal, CLAAS offers a flexible solution for ISOBUS and
steering systems.
14
Easy operation
CLAAS STANDARD TERMINAL (CST):
−− Clearly arranged keys
−− Straightforward, convenient operation
The S10 terminal:
−− High-resolution 10.4" touchscreen terminal
−− Steering and ISOBUS functions
CLAAS STANDARD TERMINAL (CST)
−− Up to four cameras can be displayed
COMMUNICATOR II:
−− 5.7" terminal
−− ISOBUS-capable
−− Auxiliary functions
CLAAS OPERATOR:
S10 terminal
−− Successor to the CLAAS STANDARD TERMINAL (CST)
−− Functions display
−− Backlit control keys
ISOBUS implement control.
Sockets are provided at the front and rear in order to connect
ISOBUS-compatible implements to the tractor. The ISOBUScapable terminal can be connected in the cab using another
socket. The attached implement is operated using a machinespecific display. ISOBUS compatibility means that implements
COMMUNICATOR II
from other manufacturers can also be operated using the S10
terminal and COMMUNICATOR II from CLAAS.
CLAAS OPERATOR
15
Full-width swathing.
Four times as good.
With the four-rotor swathers, swathing bottlenecks
become a thing of the past. The LINER four-rotor
swathers stand out from the rest, thanks to their
power, intelligence and reliability.
LINER 4000
LINER 3600
16
Four-rotor swathers
17
The high-performance swather for professionals.
Clean and fast clearance.
conditioned crop over a single swath with the LINER 3600.
This 18-to-12 mowing strategy substantially boosts chopping
With four rotors, each with a diameter of 3.30 or 3.80 metres,
performance, with a 40 percent increase in throughput.
and either 14 or 12 PROFIX tine arms, the results speak for
Alternatively, the CARGOS can step in and transport the
themselves. In just a single pass, crop widths of 15.00 metres
harvest away.
(LINER 4000) and 12.50 metres (LINER 3600) are transformed
into evenly shaped central swaths. The tidy, precise swath
shape ensures optimum crop flow for the following machines
A revolution in swathing.
during the crop collection process. With the four-rotor
swathers, CLAAS offers swath widths of between 1.20 and
With the GPS COPILOT, GPS PILOT FLEX or GPS PILOT
2.60 metres. On the LINER 3600, the swath width can be
GPS-controlled parallel guidance systems, in conjunction with
adjusted with a handle for different forage quantities and
the COPILOT, S7 or S10 terminals, you can use your CLAAS
standard pick-ups, while on the LINER 4000 there is the
four-rotor swather more efficiently than ever before. Overlaps,
added convenience of hydraulic adjustment.
travelling over the field unnecessarily and space-wasting
turning manoeuvres are now all a thing of the past.
System output boosted.
Having an optimal crop flow for the following machinery with
perfect swath forms is invaluable. With four rotors, the
performance of the JAGUAR is enhanced even further, since,
thanks to the larger working widths, there is a substantial
reduction in the area you need to cover. Users report gains of
up to 30 percent in forage harvester performance. With the
DISCO 9200 C AUTOSWATHER, you can deposit a working
width of 18.00 metres over just 12.00 metres and collect the
18
LINER 4000 / 3600
Comfortable to operate.
−− Convenient folding in and out from the comfort of the cab
−− Infinitely variable hydraulic adjustment of swath and working
The LINER 4000 and 3600 feature comfort hydraulics as
standard. The machine is operated via the CLAAS
width
−− Different parameters can be determined and stored to
OPERATOR, the COMMUNICATOR II, the S10 terminal or any
match the particular operating conditions (such as different
other ISOBUS-capable terminal. With ISOBUS operation,
swath widths and raking heights)
various functions can be assigned to the tractor's spool
valves, providing additional support for the driver in the form
of numerous automated processes. The ideal working
conditions help to eliminate errors, and the driver benefits from
−− Overview of all the services provided and customer data in
conjunction with the hectare counter
−− Display for maximum steering lock clearly visible from the
tractor seat
savings in fuel, running costs and labour time.
Clear benefits.
−− Full use of the working width and an increased acreage per
hour
−− Straightforward headland management: adjustable time
sequence for lifting and lowering the front and rear rotor
pairs, hydraulically adjustable lift height at headlands to suit
every type of forage crop and an automatic folding swath
guard for maximum ground clearance
Make use of the full width with the
various CLAAS guidance systems.
Flexible headland management with
the CLAAS OPERATOR or any
ISOBUS terminal.
19
More than four times as efficient.
Work goes on without leaving the cab.
−− Large 380/55-17, 500/50-20 or 620/40 R 22.5 road tyres
for optimum ground protection and maximum stability
With a transport height of less than 4.00 metres, the LINER
4000 and 3600 models combine maximum area output and
extreme flexibility. To reduce the transport height, the main
during transportation
−− Available with different braking options according to local
regulations – hydraulic, air or without brakes
frame and the rotors can be hydraulically lowered from the
tractor seat. The rotors are automatically locked when folded.
It is not necessary to remove individual tine arms. On the
LEDs – so you're never left in the dark.
LINER 3600, the chassis can be lowered while driving using a
single-acting spool valve without switching on the terminal.
Even when you need to work well into the night, you'll always
This allows you to adjust the transport height or the ground
enjoy all-round visibility. Perfect lighting is provided by a total
clearance to conditions. A gauge on the chassis ram shows
of three optional LED work lights (two for the front rotors and
the range that can be adjusted with the spool valve. The
one for the swath). The special light assists the driver by
integrated rotor suspension additionally ensures safe and
provided maximum contrast, yet without dazzle, ensuring
comfortable road transport.
optimal illumination around the swather. The work lights are
activated automatically along with the tractor lights in
The warning signs and lighting can be folded to negotiate
narrow entrances to yards and fields.
It couldn't be gentler.
Customisable chassis: ideal ground protection is assured,
thanks to the four-wheel rotor chassis with steered front
wheels and a laterally suspended front axle, or the six-wheel
rotor chassis for the rear pair of rotors with additional tandem
axle and trailing wheels, available as an option with the LINER
4000.
−− GRASS CARE: optimal ground-contour following, including
at high working speeds, guarantees clean forage
−− Powerful spring packs cushion the rotors
−− Suspended mounting of the rotor chassis front axle for
precise rotor guidance
−− Four steerable wheels on the front rotor, giving optimum
grass cover protection, thanks to precise running
20
darkness.
LINER 4000 / 3600
Large tyres for maximum soil protection.
Even low structures can be negotiated without
removing the tine arms.
21
The best in their class.
22
Dual-rotor swathers (central swath laying)
Operational perfection.
The reliable alternative to the four-rotor swather should
be used when flexibility is called for in addition to a
high work rate. Whether working with silage, hay or
straw, the LINER dual-rotor swather with central swath
laying, and working widths of between 6.20 and 10.00
metres, is unmatched in its class.
LINER 3100
LINER 2900
LINER 2800
LINER 2700
LINER 2600
23
The all-rounder.
Power and efficiency with two rotors.
Also supplies high-quality forage with thick
swaths.
With a working width of between 8.70 and 10.00 metres, the
LINER 3100 can be reliably deployed anywhere. This can be
With a rotor diameter of up to 4.20 metres, a total of 14
infinitely varied by means of hydraulics, and can be read off on
PROFIX tine arms, each with five double tines, ensure that
a scale. When working in straw, thanks to its generous
nothing is left behind. And with a lift height of up to 90 cm, the
working width, the LINER 3100 is easily able to combine two
LINER 3100 can drive effortlessly over even the largest straw
swaths from a 7.50-metre harvester cutterbar.
swaths. It can be adapted to all harvesting conditions via
infinitely variable headland stops. At headlands, the swath
guard automatically folds upwards, giving maximum
clearance.
24
LINER 3100
Time savings and enhanced safety on the
road.
Convenient options.
Electrohydraulic single-rotor lifting function and hydraulic
For a transport height of less than 4.00 metres, three tine
raking height adjustment – two convenient options with no
arms can be removed from each rotor and secured in the
need for ropes, operated via the CLAAS STANDARD
appropriate holder right next to the rotor, saving time. The
TERMINAL. Alternatively, the single-rotor lifting function can
chassis, with its large-volume tyres and active steering, allows
be controlled without a terminal via a three-way valve.
road speeds of up to 50 km/h. Warning signs and lighting are
fitted as standard for enhanced safety while on the road.
As the tractor is
steered, the action is
passed to the large
wheels fitted to the
main chassis via the
hitching, transfer lever
and steering linkage.
Connector for the safe
and convenient storage
of the tine arms.
25
Highest work rates and superb forage quality.
Power to perform.
Everyday operation with you in mind.
The LINER central swather has working widths of between
The LINER 2900–2600 is equipped with a four-wheel rotor
6.20 and 9.00 metres to meet every need. The swath width
running gear and steered front wheels and a laterally
can be adjusted mechanically or hydraulically according to the
suspended front axle, ensuring quiet operation and exact
operating conditions. To ensure the optimum raking results,
gauging of the ground profile. On request, all models with the
there are 14 removable PROFIX tine arms on the LINER 2900,
exception of the LINER 2600 are available with six-wheel rotor
12 on the LINER 2800 and 2700, and 11 on the LINER 2600.
running gear and additional tandem axles and trailing wheels.
To adjust to a wide range of forage crops, the headland stop
is infinitely variable in the two larger models. The swath guard,
which can be folded automatically by means of hydraulics,
ensures the maximum possible ground clearance.
26
LINER 2900 / 2800 / 2700 / 2600
Convenient transport.
Without having to get out, you can reduce the transport height
to less than 4.00 metres by folding and hydraulically retracting
the rotors. The machine's low centre of gravity guarantees
stable driving characteristics even at speeds of up to 50 km/h.
The large transport tyres of up to 380/55-17 ensures stability
on the road and maximum soil protection. The automatic
transport locking device on the LINER 2900 and 2800 provide
a further support for the driver. On the LINER 2700 and 2600,
Central swathers like the LINER 2900 are very
suitable for use in straw.
the automatic transport locking device provides maximum
safety on the road.
Operation.
The single rotor lifting function and raking height on the LINER
2900 and 2800 can be adjusted using the CLAAS STANDARD
TERMINAL without any need for ropes. Alternatively, the
single rotor lifting function can be controlled via a three-way
valve.
A success over many years: the LINER 2800.
Unbeatable value for money.
The LINER 2600 has everything you need in a swather, such
as the simply constructed rotor housing, for example. It is also
maintenance-free, hermetically sealed and permanently filled
with oil.
Ideal swath form – here with the LINER 2700.
The LINER 2600 is agile and suitable for use with
smaller tractors.
27
It cuts a dash in every setting.
Raking it in.
You can stay highly flexible even with small forage
quantities with the dual-rotor swathers with side swath
laying and working widths of between 3.50 and 8.00
metres.
LINER 1750
LINER 1650 TWIN
LINER 1250 PROFIL
LINER 800 TWIN
LINER 700 TWIN
28
Dual-rotor swathers (side swath laying)
29
Professional swathing is its job.
Turning like a professional – maximum lifting height
allowing comfortable travel over swaths
30
Tidy forage transfer from the first to the second
rotor
LINER 1750 | 1650 TWIN
The TWIN function in the LINER 1650 TWIN.
With the TWIN function, you can choose between having one
large swath or two small swaths. The latter is useful, for
example, when laying swaths at night, or with large forage
quantities.
Swathing for professionals.
Straightforward, customisable operation.
With a working width of 8.00 metres on the LINER 1750 and
The hydraulic headland stop, which can be adjusted in two
6.80 or 7.90 metres on the LINER 1650 TWIN, the side
positions, or is infinitely variable, is used to adapt to a wide
swathers are suitable for all professional silage businesses
range of forage crops. The sequential valve can be used to
and farm contractors. A total of 14 or 12 PROFIX tine arms
adjust the time delay for lifting and lowering the rotors to suit
guarantee top-quality swath results. Infinitely variable
individual requirements. These, together with the overlapping
overlapping of the rotors can be controlled from the driver's
of the rotors, which can be adjusted from the driver's seat to
seat to avoid losing forage. The four-wheel rotor running gear
avoid losing forage, especially when turning, bring added
with steered front wheels and a laterally suspended front axle
convenience and make swathing a simple task.
ensures extremely quiet operation and exact gauging of the
ground profile. The six-wheel rotor running gear with additional
tandem axles and trailing wheels is available on request for
Safety on the road.
both models, offering such benefits as enhanced groundcontour following, high work speeds and top forage quality. In
The transport height of less than 4.00 metres is achieved on
addition, the swath guard ensures a tidy swath formation
the LINER 1750 and the LINER 1650 TWIN through the
when going back for large swaths.
hydraulic retraction of the rotors. The swath guard can be
fixed in a transport position. The rotors are automatically and
securely locked when the machine is folded into the transport
position. Its low centre of gravity ensures stable driving
characteristics even at speeds of up to 50 km/h.
31
Ingenious, right down to the last detail.
Top CLAAS quality.
TWIN function.
The LINER 1250 PROFIL is unbeatable value for money. The
For those who need to work at night or simply want to swath
machine has a working width of between 6.20 and 6.90
a heavy crop, CLAAS provides the option of creating two
metres, and is ideal for a medium-sized farm with its own
swaths by using an additional swath guard. The swather runs
machinery that is looking to upgrade from a single rotor to a
behind the tractor at an angle. Because of the resulting space
robust and reliable twin-rotor swather.
between the rotors, the crop is stacked in two swaths. The
TWIN function can be simply activated via the dual-acting
Impressive.
A working width of more than 12.00 metres after each return
pass ensures that machines clearing the swath behind work
at full capacity.
32
spool valve.
LINER 1250 PROFIL
Extremely efficient.
Transporting safely.
The rotor frame wheels can be locked or unlocked at any time
The transport height of the LINER 1250 PROFIL is always less
to ensure maximum stability on slopes and to prevent scuffing
than 4.00 metres. If required, four of the eleven tine arms on
when cornering.
each rotor can be removed.
Individually adjustable sequential control.
A clean swath.
To ensure a clean end to the swath at the headland, the front
Undulating areas can also be efficiently harvested, thanks to
rotor is raised first, followed by the rear rotor after a
the PROFIL ground-contour following and the CLAAS contour
programmable delay, until all the rotors have come to a stop.
chassis.
The lowering point for the rear rotor can be adjusted using a
cable pull.
33
Unlimited flexibility.
LINER 800 TWIN.
LINER 700 TWIN.
Each of the twelve tine arms per rotor has four dual tines with
There are eleven tine arms per rotor, each with four dual tines.
a zero-play, maintenance-free connection to the rotor housing
The connector with lemon profile and PROFIX bracket ensure
via the PROFIX tine arm bracket and the 20-spline multiple
a perfectly snug fit, and there is no need to remove the tine
gearing. Six tine bars can be safely deposited on each rotor
arms for transport on the road.
for road transport.
34
LINER 800 TWIN / 700 TWIN
Efficient, high-performance swathing.
On the road.
The LINER 800 TWIN and 700 TWIN are the ideal harvest
The LINER 700 TWIN has a transport width of less than 3.00
partners for small- and medium-sized farms whose operators
metres without removing the tine arms. On the LINER 800
want to rely on efficiency at a reasonable price. The
TWIN, the rotor diameter is 3.50 metres, so the tine arms can
impressive features of the swathers include their flexible
be directly and conveniently secured on the rotor for transport
working widths, low power requirements, high operator
purposes.
convenience and exceptional raking quality. Thanks to their
large chassis and low centre of gravity, both models are
extremely stable on slopes and gentle on the soil in all types of
conditions.
Generous lifting height for driving over swaths at
headlands: up to 60 cm with the LINER 700 TWIN
Hydraulic sequential control fitted as standard to
adjust the time delay between front and rear rotors
when raising and lowering
Parallelogram drawbar is optional on the LINER 700
TWIN and standard on the LINER 800 TWIN
35
On the right track.
One for all.
The LINER single-rotor swathers are specially
developed for farmers who prefer to handle their
forage harvesting independently, and who often work
in smaller fields. The working widths of 3.50 to 5.20
metres are ideal for these situations. Whether with
three-point hitching or as a towed model, the key
features of the LINER single-rotor swathers are precise
ground-contour following, high work rates and
excellent reliability.
LINER 550 T
LINER 500 T
LINER 450 T
LINER 370 T
LINER 500 PROFIL
LINER 450
LINER 420
LINER 370
36
Single-rotor swathers
37
A machine for life.
Runs like clockwork.
Precision swathing.
In all its single-rotor swather models, CLAAS relies on the
All LINER machines fit into the lower linkage points on the
continuously lubricated and hermetically sealed CLAAS rotor
tractor using a sturdy inverted U-frame. The wide-opening
housing. With the exception of the LINER 370, all models are
insertion points for the upper linkage create significant ground
equipped with the PROFIX tine arm bracket and multiple
clearance when in the raised position, even on small tractors.
gearing. On the smaller models, the LINER 370 T and the
LINER 370, the tine arms are connected to the rotor housing
The raking height can be adjusted from the cab hydraulically
with a lemon profile.
or via a crank lever for perfect, precision raking. The position
of the swath guard can be fixed via an easy-to-operate
clamping bolt.
All bumps smoothed out.
The practical placement area integrated into the inverted
The CLAAS contour chassis with V-shape tandem axle is
U-frame ensures that the drive shaft remains within easy reach
positioned close to the tines and adapts to uneven ground.
and at working height when attaching, and has its place when
The configurable lateral tilt enables the machine to adjust to
detaching the swather.
different forage volumes. With its castor guide wheel, the
swather glides over any uneven surface, even under more
challenging conditions, ensuring it can operate with minimal
loss and deliver an outstanding crop quality.
With the LINER 500 PROFIL, CLAAS introduces the world’s
first single-rotor swather with fully floating suspension,
facilitating three-dimensional tracking over uneven ground,
independent of the tractor motion.
CLAAS also relies on the PROFIX tine arm bracket
on the single-rotor swathers
38
On virtually all of the single-rotor swathers, the
guide wheel is available as an optional extra
Generous lifting height for driving smoothly over
swaths
LINER 550 T / 500 T / 450 T / 370 T / 500 PROFIL / 450 / 420 / 370
Stable inverted U-frame with ample ground
clearance
V-shaped tandem axle for precise ground-contour
following
39
It’s all about individual performance.
Trailed mowers.
Safe and secure on the road.
CLAAS has also made the LINER 550 T, 500 T, 450 T and
Spring-mounted, or, as an option, hydraulically folding
370 T available as trailed variants so that farmers with smaller
protective frames and easily accessible transport brackets for
tractors can also reap the benefits of a high-performance
the removable tine arms quickly help reduce the transport
swather. With working widths of between 3.50 and 5.20
width to the permissible level. The rotor is locked in place by
metres, the trailed swathers follow on effortlessly behind the
the integrated transport bracket when on the road. The large
tractor, even over sloping terrain. Once hitched up, the wide-
warning signs are available as options, either with or without
track machine stays in line behind the tractor both in the field
lighting. The load on the carrier frame for the attached
and on the road.
swathers is reduced by the CLAAS CKL power drawbar. The
springs in the CKL struts counteract the bumping action of the
swather when manoeuvring downhill. The automatic
attachment with the struts of the three-point mounting keeps
the swather firmly in place on the road.
40
LINER 550 T / 500 T / 450 T / 370 T / 500 PROFIL / 450 / 420 / 370
LINER
Working width
LINER 550 T
m
5.20
LINER 500 T
m
4.80
LINER 500 PROFIL
m
4.80
LINER 450 T
m
4.50
LINER 450
m
4.50
LINER 420
m
4.20
LINER 370 T
m
3.50
LINER 370
m
3.70
Off you go – no fuss.
The ideal machine every time.
Just one single-acting spool valve is required to operate the
The LINER single-rotor swathers are mainly intended for use in
trailed single-rotor swathers.
smaller fields. Working widths of 3.50 to 5.20 metres are ideal
for these situations. Whether with three-point hitching or as a
−− The hitch design enables raising of the rotors parallel to the
ground
−− Setting of rotor angle in the direction of travel via a built-in
towed model, the key features of the LINER single-rotor
swathers are precise ground-contour following, high work
rates and excellent reliability.
crank handle fitted in the drawbar cylinder
−− Optional: parallelogram drawbar for connection to rigid
pulling mechanisms
41
For connoisseurs.
Attention to every detail.
Timing is everything.
Our perfectly coordinated product range enables you to
The harvest season is often very short, because of weather
maintain outstanding forage quality at every stage in the
conditions. CLAAS forage harvesting machines are therefore
process – without compromise.
designed for reliable operation at maximum efficiency, as the
only way to achieve top quality outcomes.
Our goals are your goals:
−− Healthy cows
−− More milk per forage unit
−− Higher gas yields for biogas plant operators
−− Profitable, efficient and sustainable production
42
Harvesting quality
Keeping next season in mind.
CLAAS understands the importance of harvesting with
minimum impact on soil, grass cover and the harvested crop.
CLAAS-developed solutions such as ACTIVE FLOAT, MAX
CUT and the unique PROFIL linkage geometry for DISCO,
MAX SPREAD for VOLTO, GRASS CARE for LINER and
EFFICIENT FEEDING SYSTEM (EFS) for CARGOS help you to
achieve these aims. Our optimism for the future is based on
close attention to our customers' needs and a wealth of
innovative ideas.
43
Service at CLAAS is not just a promise, but a way
of life.
We're always close by when you need us.
Every minute counts in your forage harvesting operation.
Periods of downtime cost money, and must be avoided
wherever possible. Our central parts warehouse in Hamm
(Germany) delivers all CLAAS ORIGINAL parts quickly and
reliably all over the world. The dense network of CLAAS
dealers around the world ensures that parts reach their
destination as quickly as possible – wherever you happen to
be. The CLAAS spare parts team stands at the ready 365
days a year, 7 days a week, 24 hours a day, to give you the
fast and reliable service you require.
CLAAS ORIGINAL – for a long machine
service life.
In the best hands.
The First CLAAS Service teams at the different CLAAS
CLAAS dealers operate some of the world's top-performing
distributors around the world provide a full spare parts supply
farming equipment workshops. Their technicians are superbly
and reliable round-the-clock customer service. They are
qualified, and have access to all the required specialist tools
available at any time to assist you and your machine with their
and measuring equipment. CLAAS Service stands for top-
knowledge, experience and passion, and will provide you with
quality work that will fully meet your expectations for skill and
CLAAS ORIGINAL parts in the shortest possible time. These
reliability. CLAAS service outlets also have the latest
parts are characterised by superior quality, superb function
diagnostics equipment for precise fault detection, including
and a long service life. They have been specially developed
remote troubleshooting. And if a repair is required, CLAAS
and technically validated for specific CLAAS machine types,
dealers have access to the online information and systems
and their superb quality sets them far apart from competitor
they need for a rapid response and deliver a quality repair
products. The combination of CLAAS ORIGINAL parts and
service. They also stock the key CLAAS ORIGINAL spare
the dedicated service performance of CLAAS Service staff in
parts, fuels and oils needed for efficient and effective
customer service outlets and dealer workshops will keep your
servicing.
machines running reliably and efficiently, thereby ensuring the
ongoing profitability of your farm.
44
LINER
45
46
LINER central swathers
4000
Mounting category
Working width
Swath width1
Four-rotor swathers
Cat. III
Cat. II
12.20 – 15.00 9.90 – 12.50
1.50 – 2.60
1.20 – 2.30
Dual-rotor swathers
Cat. II
Cat. II
Cat. II
Cat. II
Cat. II
8.70 – 10.00 8.00 – 9.00 7.40 – 8.20 6.80 – 7.40 6.20 – 6.80
1.50 – 2.60
1.20 – 2.40 1.20 – 2.20 1.20 – 2.00 1.10 – 1.80
m
3.00
3.00
2.97
2.97
2.97
2.97
2.97
m
m
m
Qty
m
Qty
Qty
mm
3.99
3.57
10.16
4
3.80
14
4
9.5
●
Centre
●2
○3
●
3.99
3.40
8.70
4
3.30
12
4
9.5
●
Centre
●
–
●
4.46
3.75
6.92
2
4.20
14
5
9.5
●
Centre
–
●2
●
3.99
3.72
6.53
2
3.80
14
4
9.5
●
Centre
●2
○
●
3.99
3.47
6.53
2
3.50
12
4
9.5
●
Centre
●2
○
●
3.99
3.38
5.87
2
3.20
12
4
9
●
Centre
●
○
●
3.99
3.18
5.87
2
2.90
11
4
9
–
Centre
●
–
●
rpm
540
●
540
●
540
●
540
●
540
●
540
●
540
●
4x4
4x4
2x6
2x4
2x4
2x4
2x4
–
–
2
–
approx. kg 5850
–
○
○
2
4600
–
–
–
2
2800
–
–
–
2
2250
2
–
–
○
2050
2
–
–
–
1900
2
–
–
–
1600
○
–
–
●
○
○
1x
single-acting
○
●
○
○
○
–
1x
single-acting
○
○
○
○
○
–
1x
singleacting
1x
dual-acting
○
○
○
–
–
–
1x
singleacting
–
○
–
○
–
–
–
1x
singleacting
–
Transport width
with tine arms attached
Transport height / storage height
with tine arms attached
with tine arms removed
Parking length (transport position)
Rotors
Rotor diameter
Tine arms per rotor set
Dual tines per arm set
Tine diameter
PROFIX tine arm bracket
Swath-laying position
Four-wheel rotor chassis
Six-wheel rotor chassis
Fully floating suspension
Drive systems
PTO speed
Single wide-angle PTO drive shaft
Tyres
Rotor chassis
16 x 6.50-8 10 PR
Main frame
10.00/75-15.3 10 PR
500/55-20
620/40 R 22.5
380/55-17
Weight
m (DIN)
m,
approx.
Convenience
Spare wheel 16 x 6.50-8 10 PR
Wheel weights
Single-rotor lifting function (three-way valve)
Single-rotor lifting function, electrohydraulic
Electrohydraulic rotor height adjustment
LED working lights
Hydraulic spool vavles
1 Depending on the prevailing crop conditions and speed
2 Front lateral suspension
3 For rear pair of rotors
●Standard○Optional□Available–Not available.
○
–
–
●
○
○
–
3600
3100
2900
○
○
○
○
○
–
1x
singleacting
1 x sa + OR or 1 x sa + OR or 1 x dual-acting 1 x
LS
LS
dual-acting
2800
2700
2600
LINER side swathers1
1750
1650 TWIN
1250 PROFIL
800 TWIN
700 TWIN
500 PROFIL
Swinging drawbar/
hitch
–
3.50–6.30
Single-rotor swathers
Three-point
Three-point / swivelling head
Cat. II
Cat. I + II
4.80
4.50
Dual-rotor swathers
Mounting
Mounting category
Working width
Transport width
with tine arms attached
with tine arms removed
Transport height / storage height
with tine arms attached
with tine arms removed
Parking length (transport position)
Weight
Rotors
Rotor diameter
Tine arms per rotor set
Dual tines per arm set
Tine diameter
PROFIX tine arm bracket
Swath-laying position
Four-wheel rotor chassis
Six-wheel rotor chassis
Tyres
Rotor chassis
Main frame
550 T
500 T
450 T
370 T
Three-point / swivelling head
Cat. I + II
4.20
Three-point / swivelling head
Cat. I + II
3.70
Swinging drawbar/
hitch
–
5.20
Swinging drawbar/
hitch
–
4.80
Swinging drawbar/
hitch
–
4.50
Swinging drawbar/
hitch
–
3.50
Cat. II
8.00
Cat. II
6.80–7.90
Cat. II
6.20–6.902
m
m
2.96
–
2.88
–
2.93
–
3.60
2.42
3.00
2.42
3.803
2.40
3.503
2.30
3.203
2.00
2.983
1.534 / 1.75
4.203
2.65
3.803
2.50
3.503
2.20
2.983
–
m
m
m
approx. kg
Qty
m
Qty
Qty
mm
3.99
3.69
9.54
2625
2
3.80
14
4
9.5
●
left
●
○
3.99
3.55
8.60
2230
2
3.20
12
4
9.5
●
left
●
○
3.75
3.07
8.10
1780
2
2.90
11
4
9.0
●
left
●
–
–
–
8.55
1620
2
3.50
12
4
9.5
●
left
●
–
–
–
8.00
1440
2
2.90
11
4
9.5
●
left
●
–
–
2.45
3.30
805
1
3.80
14
4
9.5
●
left
●
○
–
2.45
4.10
670
1
3.50
12
4
9.0
●
left
●
–
–
2.35
3.80
650
1
3.20
12
4
9.0
●
left
●
–
–
2.15
2.55
470
1
2.90
11
3 (4 ○)
9.0
–
left
●
–
–
2.45
4.60
875
1
4.20
14
5
9.5
●
left
●
–
–
2.45
4.40
785
1
3.80
14
4
9.5
●
left
●
–
–
2.45
5.25
715
1
3.50
12
4
9.0
●
left
●
–
–
–
4.75
525
1
2.90
11
4
9.0
–
left
●
–
2 x 4 (2 x 6 ○)
–
–
2
–
●
2 x 4 (2 x 6 ○)
–
2
–
2 (○)
●
2x4
–
2
–
–
●
–
2x4
–
–
–
●5
–
2x4
–
–
–
●5
2 x 4 (2 x 6 ○)
–
–
–
–
●
4
–
–
–
–
–
4
–
–
–
–
–
4
–
–
–
–
–
–
4
–
–
–
–
–
4
–
–
–
–
–
4
–
–
–
–
4
–
–
–
–
–
540
●
540
●
540
●
540
●
540
●
540
–
540
–
540
–
540
–
540
●
540
●
540
●
540
●
○
–
○
–
–
–
–
○
–
●
–
1 x single-acting
1 x dual-acting
○
–
○
–
●
–
–
–
–
●
–
1 x single-acting
1 x dual-acting
○
–
–
–
○
–
–
–
–
●
–
1 x single-acting
1 x dual-acting2
–
○
–
○
●
○
○
–
–
●
●
1 x single-acting
1 x dual-acting
–
○
–
○
●
○
○
–
–
●
○
1 x single-acting
1 x dual-acting
–
–
–
–
–
–
○
○
○
○
–
–
+ 1 or 2 x
dual-acting6
–
–
–
–
–
○
○
○
○
○
–
–
+ 1 or 2 x
dual-acting6
–
–
–
–
–
○
○
○
○
○
–
–
+ 1 or 2 x
dual-acting6
–
–
–
–
–
○
–
–
○
○
–
–
–
–
–
–
–
–
○
○
–
○
○
○
1 x single-acting
+ 1 x dual-acting6
–
–
–
–
–
○
○
–
○
○
○
1 x single-acting
+ 1 x dual-acting6
–
–
–
–
–
○
○
–
○
○
○
1 x single-acting
+ 1 x dual-acting6
–
–
–
–
–
○
–
–
○
○
○
1 x single-acting
–
rpm
Comfort
Spare wheel 16 x 6.50-8 10 PR
Spare wheel 18 x 8.50-8 6 PR
Wheel weights
Double wide-angle PTO drive shaft
TWIN function
Guide wheel at front
Hydraulic swath guard folding
Hydraulic rotor height adjustment
Warning sign
Warning sign with illumination
Parallelogram drawbar
Hydraulic spool valves
1 Swath former cloth guard
4 LINER 370 with single axle
2 TWIN function (option) with additional swath
guard for front rotor
5 Rear only
●Standard○Optional□Available–Not available.
370
m (DIN)
Fully floating suspension
3 Swath guard and protective frame folded
420
Swinging drawbar/
hitch
–
4.00–7.50
16 x 6.50-8 10 PR
18 x 8.50-8 6 PR
10.00/75-15.3 10 PR
380/55-17
340/55-16
Drive systems
PTO speed
Single wide-angle PTO drive shaft
450
6 One sa respectively for hydraulic rotor height
adjustment and hydraulic swath guard folding
CLAAS continually develops its products to meet customer requirements. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be
considered approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please refer to your nearest CLAAS dealer and
their price list for local specification details. Some protective panels may have been removed to present the function more clearly in photographs. To avoid any risks, you should never remove these
protective panels yourself. In this context, please refer to the relevant instructions in the operator's manual.
●Standard○Optional□Available–Not available.
CLAAS UK
Saxham
Bury St. Edmunds
Suffolk
IP28 6QZ
Tel 01284 763100
365FarmNet enables you to manage your entire
agricultural business by means of a single, nonproprietary software solution. Interfaces to intelligent
applications created by partners in the agricultural
sector offer expert support for your business 365 days
a year.
CLAAS is a 365FarmNet partner.
claas.co.uk
info-uk@claas.com
540012130914 KK ME 0815
www.365farmnet.com