3D Direct Modeling Software

Transcription

5
.
2
1
V
MASTER YOUR GEOMETRY
1
Table of Contents
Major Enhancements3
Animation3
Automated Movement3
Camera Control3
Timeline Control3
Constraint Solving4
Collision Detection4
Kinetic Energy5
Environmental Control5
Interactive Mode5
Management6
Direct Dimension Edit Tree6
Saved Commands6
Dimension Checker7
Model Configuration
7
Management8
Wire EDM Module8
2-axis Toolpaths8
Toolpath Options9
Tapered Wall9
Cutter Compensation9
Lead-In and Lead-Out9
Cornering Control9
Rough and Skim Cuts10
Rotary Indexing10
Sample Posts and Customization Capabilities 10
Interoperability11
Inventor 201411
Parasolid R2611
Modeling11
Blend Editing11
Curve Imprint to Selected Faces
12
Selective Merging of Redundant Faces
12
Smarter Patterns13
Options for Chain Selection of Curves
13
Expanded Pipe and Tube Databases
14
Detailing14
Split Balloon Increment14
Layout Revision Prevents Dimension Underline
15
Visualization15
More Information in Entity ToolTips
15
Level Number15
Fastener and Structural Shape Length
16
Mechanical Element Parameters16
Dimension-driven Edge Highlighting17
Clear Temporary Facet Colors17
Set Physical Material Properties More Easily
17
Review Toolpath Information18
Setup18
Print Option for Detail Callout Borders
18
Share Usage Information with Kubotek
18
Product Code Optional in License Wizard
18
Flat Pipe Bonus CDE19
Flat Patterns from Cylindrical and Conical Faces
19
2
Major Enhancements
KeyCreator 2014 v12.5 provides animation capabilities, a significant Dimension-driven Editing upgrade
and a 2-axis Wire EDM option.
Animation
The feature-rich rigid body animation capabilities …
Automated Movement
Selected solids-based entities can be assigned a motion speed along or around an axis for a
specified amount of time to help users visualize or communicate the action of their design.
Setting up animation of the moving parts of this worm gearbox takes just a few minutes
Camera Control
Animation temporarily draws the movement in the KeyCreator viewport while the user maintains
full access to standard zoom, pan, and rotate controls so the motion can be viewed from any
angle.
Timeline Control
Motion can be replayed, paused, and manually stepped forward or backward in time to allow
careful study and clear understanding.
Alpha-style Stirling engine model animation shows operation of pistons 90 degrees out of phase
3
Constraint Solving
The interaction of connected bodies in a mechanism can be modeled with hinge, slider, ball and
socket, and fixed constraints. The system of multiple potentially inter-dependant constraints is
rapidly solved by an iterative physics engine.
This V2 engine animation of 7 separate bodies requires iterative solving of 9 constraints.
Collision Detection
Options allow animation to halt if a collision is detected, or highlighting the bodies involved. This
is an enormous aid in checking for problems in the complex 3D motion of a design through its
range of motion.
Checking collisions on a suspension with a horizontal mounted shock absorber.
4
Kinetic Energy
Collisions between bodies, respecting assigned constraints, appropriately exchange kinetic energy
and approximate the real world result of such impact/contact.
In this animation red knock-out pins contacting the white parts eject them from the cavity.
Environmental Control
The effects of gravity and dampening coefficients can be applied to the system of bodies to
further simulate the operating conditions of the design being studied.
Interactive Mode
For less structured testing of mechanisms users can dynamically move a selected body along/
around a single axis to see how the rest of the system will react.
Pulling the green pin along its axis forces the connected parts to move according to the constraint system.
5
Management
The Animation tab provides a tree-style constraints list with re-naming, parameter adjustment,
custom folder capabilities, and options to temporarily disable constraints for testing. A second
tree for bodies involved in the animation allows for re-naming, merging, folder organization, and
quick disabling of movement and collision calculation for optimization and testing.
The 50 solids that make up the B Side of this mold have been merged into a single Animation Body to
simplify constraints and management of the animation.
Direct Dimension Edit Tree
Saved Commands
The new DDE (Direct Dimension Edit) tab on the Part Splitter lists saved Dimension-driven Edit
commands and pairs highlighting of each command with its dimension and set of related faces.
This saves time and errors when the same Dimension-driven Edit operations are re-executed
later.
Executing listed Dimension-driven Edit commands supports quick changes to several saved dimensions.
6
Dimension Checker
Saving dimensions to the DDE tab also provides a mechanism for quickly checking if the
measured values of key dimensions have changed.
Red highlighting shows that model edits have caused a monitored dimension to not match its target value.
Model Configuration
The DDE tab can be used to make automated design adjustments by moving faces connected to
saved Dimension-driven Edit commands.
After entering a single new value for the saved Dimension-driven Edit command ‘Length’ the model on the
top has automatically changed to the one on the bottom.
Users with basic programming experience can use the DDE tab variables, formulas, and
conditional logic capabilities as a limited model configuration tool.
7
Management
Dimension-driven Edit commands, variables, pause entries, and folders can be easily re-named,
re-ordered, and selectively disabled to save time organizing and working with the data.
Executing this carefully planned DDE Tree updates the associated model using each Dimension-driven Edit command in sequence.
Wire EDM Module
KeyCreator Machinist has been expanded with a new optional module for programming Wire EDM
machines.
2-axis Toolpaths
-Generate 2-axis Wire EDM toolpaths within KeyCreator from open or closed planar profiles
selected from wireframe or solid geometry.
Wire EDM toolpaths are managed as composite entities within the KeyCreator part file.
8
Toolpath Options
Tapered Wall
Using the constant taper option is an effective strategy for cutting punch or die cavities in a plate.
This potentially difficult tapered pocket is easy to cut smoothly with 2-axis Wire EDM
Cutter Compensation
Diameter compensation options support inclusion of cutter compensation in the path or allow it to
be handled at the controller.
Lead-In and Lead-Out
Lead-in and lead-out options provide smooth starts and finish to profile to avoid pips. Cornering Control
Sharp, round, and loop options provide methods to ensure sharp corners when specified.
The Wire EDM 2D dialog provides numerous
options to control toolpath creation.
9
Rough and Skim Cuts
Toolpath definition supports multiple passes for improved part finish
The third stage of the Wire EDM toolpath wizard
provides definition for multiple passes.
Rotary Indexing
Adjusting machining view provides support for “Turn, then burn” on Wire EDM machines with a
rotary axis.
Sample Posts and Customization Capabilities
Like other Machinist modules Wire EDM provides post customization capabilities and several
sample posts for common machines. Wire EDM also provides an interface for inputting custom
auxiliary parameters available for inclusion in custom posts.
An external ASCII text file allows customization
of up to 10 parameter names
10
Interoperability
The 2014 V12.5 release includes several interoperability updates.
Inventor 2014
- Autodesk Inventor Import has been enhanced to support version 2014 files.
Parasolid R26
- Siemens PLM Parasolid Import and Export has been enhanced to support version R26 files.
Modeling
Several minor improvements in modeling capabilities aid users in getting special tasks done more
efficiently.
Blend Editing
- Dynamic Face recognizes if the selected face(s) are a fillet/round and allows quick editing of the
radius by pulling/pushing the DynaHandle or typing a value into the ToolTip.
Dynamic Face blend editing supports cursor pulling of faces to increase fillet size by eye, or typing a value.
11
Curve Imprint to Selected Faces
-The Modify>Topology>Imprint function has been expanded with a time saving new Project Curve
onto Faces option which allows imprinting to stop and not continue creating extraneous imprints
through all faces of a solid which intersect the projection vector. The new faces option also
supports imprinting on faces of separate bodies which intersect the specified projection vector.
Imprinting the blue curves onto just the top face of this solid saves significant model cleanup time.
Selective Merging of Redundant Faces
- Redundant faces are a region within another face which can be the result of translation or
modeling anomalies. Because they can lead to modeling problems, it is recommended to clean
redundant faces off solids. However, some faces classified as redundant are intentionally created
(with Imprint Curves for example) and need to be preserved. To support this need the Merge
Redundant Faces option in the Tools>Maintenance>Clean Body function has been enhanced with
a “Select faces to Exclude from Merging” option.
Selective merge allows clean up and preservation of face coloring for seal-off, clearance, and part.
12
Smarter Patterns
-Create>Solid Feature>Patterns functions now respect and maintain entity type or feature
information (if any) in all copies made. This provides support of verification and editing of the
copies equivalent to what was possible with the original. Pattern creation functions are now also
able to optionally repair self intersections between bump selected features.
The five countersunk screws in this wear plate created as a linear pattern are equal to the initial fastener.
Options for Chain Selection of Curves
- The Curve option in the Chain menu of the Universal Selection Menu has been enhanced with
several new option toggles.
Four new option buttons have been added to the Chain menu of the Universal Selection Menu.
The new Repeat mode allows selection to continue in the Chain menu after a ‘quick’ selection is
made. This saves clicks for users that commonly select multiple profile chains in a single function.
The other three of the four new buttons show the status of and provide temporary override
control of established options accessible in other places. The Direct option matches the
Tools>Options>Select page option ‘Enable Manual Chain Direction Selection’. Turning this option
on will prompt the user to select one of two opposing vectors to define the chaining direction
instead of assuming a start position the end of the first curve closest to the cursor. The Quick
option matches the Edit>System Settings>Quick Chain toggle function and the equivalent
Tools>Options setting. The CPln Q option similarly matches the Edit>System Settings>Restrict
Chain and Tools>Options ‘Restrict Chain Select to C-Plane’.
13
Expanded Pipe and Tube Databases
-An updated version of the pipe database includes hundreds of additional inch-based and metric
sizes from the American standards. The Type and Designation column text has been adjusted
significantly to better match other Structural shapes and provide good support for proper size
designations to appear in ToolTips (requires Mechanical Element Object option).
The first selection is now the size range and the second is nominal size and wall schedule.
Also a new version of the rectangular tube database provides hundreds of additional sizes from
the American standards.
Detailing
KeyCreator 2014 V12.5 provides several user-requested detailing improvements.
Split Balloon Increment
- The Detail>Notes>Balloon function has the added flexibility of a new increment option for the
text in the lower half of a split circular balloon. This option works the same as the increment
option for the text in the upper half has always worked.
The lower text in this series of balloons is incrementing
automatically with each balloon placed.
14
Layout Revision Prevents Underline
-Layouts created by the Layout>Layout Revision function now ignore the non-associated settings
in Tools>Options>Dimensions and never change the color of or underline the text of dimensions
as a warning of potential problems. Such a warning is unnecessary in this case because
dimensions in a layout revision have been automatically intentionally made non-associated so
that they will never update with changes to the model.
Visualization
Being able to immediately and clearly see details in graphical design information from various views
and configurations is one of the major overall benefits of CAD and 3D modeling. Kubotek continues
to strengthen KeyCreator in this important area by handing the minutiae, which add up to serious
productivity advantages.
More Information in Entity ToolTips
- Entity ToolTips appear next to the cursor during fly-over highlighting in the Tools>Verify>Entity
function and Pre-selection mode. These ToolTips now provide several additional pieces of
information.
Level Number
- All entities and entity components (faces, edges, flowlines, etc.) now report their level number in
the ToolTip.
The ToolTip reports the number of the lowest sub-level the entity is on.
15
Fastener and Structural Shape Length
-Length information is now appended to the end of ToolTips on Screws and Bolts created as
Fastener Objects and all Structural Shape objects.
ToolTips on these standards-based parts now provide the full designation used for ordering.
Mechanical Element Parameters
- The ToolTips of Sprocket, Chain, Gear, Rack, Spring, and Bearing Mechanical Element Objects
provide all key dimensions and style information.
The ToolTips provides basic parameter values or ordering information for this Spur Gear.
16
Dimension-driven Edge Highlighting
-The Dimension-driven Edit function has been enhanced to display dimension attachment more
clearly. Edges to which the dimension is attached are highlighted and a marker is drawn at the
attachment position on each.
Orange highlighted edges and triangle center markers
show how this dimension is attached to the model.
Clear Temporary Facet Colors
- Several functions in KeyCreator such as Draft Angle Analysis and Color Faces by Deviation
temporarily color the display facets of selected bodies. The new Edit>Entities>Reset Rendering
function resets bodies to their actual body or face colors.
Set Physical Material Properties More Easily
-When numerous solids of different materials are in a single KeyCreator part setting the majority
of them from a default material can be a big time saver. The material currently assigned to the
active part in File>Properties>Material Physical Properties is now listed in the Edit function dialog
under the Set From Part’s Properties to help the user see which material that option will use.
This solid will use the material assigned in Properties, which is currently A97178.
17
Review Toolpath Information
-Five Machinist functions for managing NC toolpath entities are now available to all KeyCreator
users to support review of process strategies.
Any KeyCreator user can now review the Job Process
Sheet Table and other NC information in a CKD file. Setup
Added settings options allow users to configure function output to match their styles and preferences.
Print Option for Detail Callout Borders
- The option to not print the borders of layout drawing instances has been separated into two
options for added control. Detail Callout instances now have their own Tools>Options switch so
that their borders print by default, but standard view instance borders do not print by default.
Share Usage Information with Kubotek
- A new option allows users on PCs with an Internet connection a simple, automated way to send
anonymous reports to Kubotek about which functions they used in each KeyCreator session. This
information will be used to help Kubotek make improvements to future versions of the program.
Product Code Optional in License Wizard
- The License Wizard 2014 program used to set up Activation Licensing can determine the
necessary product code from a correctly entered Activation Code. This eliminates a minor source
of errors that could prevent successful license activation.
18
Flat Pipe Bonus CDE
Flat Patterns from Cylindrical and Conical Faces
A new add-in program accurately develops flat patterns from cylindrical and conical faces, as
well as skewed-cone type spline faces. This function supports additional elements for secondary
profiles and user specified split location. Circular and linear entities in the profile are appropriately
simplified to arcs and lines for ease of use in manufacturing. The flat profile on the right was automatically calculated from the highlighted face on the left.
Kubotek USA, Inc.
2 Mount Royal Ave. Suite 500, Marlborough, MA 01752
Phone: 800-372-3872
www.kubotek3d.com
sales@kubotekusa.com
©Copyright 2014 Kubotek Corporation. All rights reserved. 3D Direct Modeling Software
KC2013WN-0913-R2
19

3D Direct Modeling Software

Transcription

Similar documents

Page 1 Proving a triangle is a right triangle Method 1: Show two

FACE-MAKER

Archery Targets/Faces/Stands $6450 $12450 $2900 $28450 $29900

PDF

hemispheres t/t wire cover letter

On Chance and Face_FINALpublished_withImages

Chicago Street Domination

Toopy and Binoo`s Cubic Puzzles Set up the game… Ask a grown

new faces