softail-style frames / 1-3/8” mega-tube

Transcription

Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
1
Hours: Monday thru Friday 7:00am to 5:00pm P.S.T.
Ph: 818-837-3520
Fax: 818-837-3522
email: info@krafttechinc.com
www.krafttechinc.com
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
4
Frames
SOFTAIL-STYLE FRAMES / 1-1/4” TUBING
Frames
* Feature 1-1/4” thick wall , DOM steel tubing with 1-1/2” backbones
* All frames are TIG-MIG welded & they will accept Panhead, Shovelhead
and Evolution (except Twin Cam) engines with cylinders up to .200”
taller than stock Evo
* Frames designed for 5 or 6-speed Softail-type transmissions
Swingarms
* These frames have been an industry-standard since their introduction
* Component Kits are included with purchase of frame. . .these kits are
not sold separately
Fenders
Struts
GAS TANK MOUNTS are welded in place
All frames except those w/8” stretches
are delivered with mounts that accept
Softail-style flatside gas tanks
NECKS are CNC-machined
from solid steel
Gas Tanks
SEAT BRACKET is adjustable
Frames are set-up to accept stock
style Softail or custom OIL TANKS
Oil Tanks
DEBRIS DEFLECTOR (Splash Guard )
mounts are welded in place
REAR AXLE CARRIERS are
solid steel. . . REAR AXLES
are 1” for 230/240/250 frames
and 3/4” for all other models
1-1/2” BACKBONE TUBING
Available stretch configurations
0” / 1-1/2” / 4”
All
frames come complete
NECK RAKE
ANGLES
30º / 34º / 38º
Fwd
Controls
S.N. BOSS
Manufacturer’s
Statement of Origin
with a
REAR MOTOR MOUNT
is milled after welding
Kickstands
FRONT RAIL STRETCH
configurations
2” / 4” / 8”
Frame shown is 4” stretch
Rear section has mounting
provision for 1987-1999 type
REAR BRAKES
UPRIGHTS are 1/2” thick
and styled to merge frame
and rear section together
as if they were one
Hex Nut Pivot Bolt
FRAMES are set up
for Softail-style
SHOCK ABSORBERS,
1987-1999 type
TRANSMISSION PLATE / PLATFORM
is an integral assembly, welded in place to provide
unit construction strength as well as the best possible
driveline alignment Wide tire models have offsets built
into the frame
Handlebars
FRONT MOTOR MOUNT
is solid steel
Wide tire frames have
built-in offsets
Exhaust
COMPONENT KITS are included with purchase
of frame. . .these kits are not sold separately
Frames
Misc.
5
Frames
SOFTAIL-STYLE FRAMES / 1-1/4” TUBING / STOCK WIDTH
* Designed for use with 1987-1999 rear sections (Rear section not included) see page 78
* Frames equipped with stock style coil and oil tank mounts as well as gas tank mounts for flatside tanks
* Available with neck rakes of 30º / 34º / 38º
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Sold Separately
Exhaust
Part #
K15051
K15052
K15053
Misc.
Style
Softail
Softail
Softail
Tire Width Tubing
Stock
1-1/4"
Stock
1-1/4"
Stock 1-1/4" Rake
30º
34º
38º
Up Stretch
0"
2"
2"
6
Frames
SOFTAIL-STYLE FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH
* Designed for 180 width tire w/1-1/2” belt or 200 width tire with chain
* Offset built into frame / No spacing required
* Stock motor and transmission bolt-in
* Component kit is included
Frames
Swingarms
Kit Included
Fenders
Struts
Sold Separately
Gas Tanks
Sold Separately
Part #
K15060
K15061
K15062
Style
Softail
Softail
Softail
Tire Width Tubing
180
1-1/4"
180
1-1/4"
180 1-1/4" Rake
30º
34º
38º
Up Stretch Includes
Oil Tanks
0"
Rear Section Assembly
2"
2"Rear Section Assembly
Fwd
Controls
Kickstands
Kit Included
Handlebars
Sold Separately
Exhaust
Part #
K15067
K15068 Style
Softail
Softail
Tire Width Tubing
180
180
1-1/4"
1-1/4" Sold Separately
RakeUp Stretch Back Bone Str. Includes
34º
38º
4"
4"
1-1/2"
1-1/2"
Rear Section Assembly & Fork Cup Kit
Frames
Misc.
7
Frames
* Designed for 200 width tire w/1-1/2” belt or chain
* Offset built into frame. . .use 1/2” spacer between engine and inner primary cover
use 1/2” longer spacing on engine sprocket or pulley
Swingarms
Fenders
Struts
Sold Separately
Gas Tanks
Kit Included
Oil Tanks
Part #
K15072 Style
Tire Width Tubing
Softail
200
1-1/4" 34º
4"
1-1/2"
Fwd
Controls
Rear SectionAssembly & Fork Cup Kit
Kickstands
Sold Separately
Handlebars
Exhaust
Kit Included
Misc.
Part #
Style
K15079 Softail
8
Frames
Tire Width Tubing
200
1-1/4" 38º
8"
4"
Rear SectionAssembly & Fork Cup Kit
SOFTAIL-STYLE FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH
Frames
* Designed for 230/240 width tire w/1-1/2” belt or 250 width tire w/1-1/8” belt or chain
* Offset built into frame...use 1” spacer between engine and inner primary
use 1” spacing on engine sprocket or pulley
Swingarms
Sold Separately
Fenders
Struts
Gas Tanks
Kit Included
Oil Tanks
Part #
K15073 Style
Tire Width Tubing
RakeUp Stretch Includes
Softail
230/240/250 1-1/4" 34º
2"
Rear Section Assembly w/1" Axle Kit
Fwd
Controls
Kickstands
Sold Separately
Handlebars
Kit Included
Part #
K15081 Style
Exhaust
Tire Width Tubing
Misc.
Softail
230/240/250 1-1/4" 38º
2"
Rear Section Assembly w/1" Axle Kit
Frames
9
Frames
CURVED DUAL DOWN TUBE SOFTAIL-STYLE 1-1/4" TUBE FRAMES w/HIDDEN AXLE
This line of curved dual down tube frames demonstrates KRAFT/TECH's commitment
to quality & affordability without compromise.
Swingarms
*
*
*
*
*
*
*
*
*
*
*
Fenders
Struts
Frames for 300/330 tires, 1-1/2" backbone, 1-1/4" thereafter, all DOM steel tubing, mandrel bent
Frames come with 38 degree or 40 degree neck rake angles, with front leg stretches of 0" or -2"
Engineered with a super-strong upper frame design with integral neck webbing that offers unparalleled strength with pleasing aesthetics
Dual down tubes curve smoothly and flow continuously to become the lower frame rails
These Softail-style beauties are delivered complete with billet hidden axle rear section
Rear axle carriers are available in 2 styles: Dagger and Curved Dagger. Axle cover set included.
Component kit consists of our best quality pivot axle w/flush mount stainless pivot bolts and bearings
Integral one-piece trans mounting plate is part of the frame structure, assuring unit construction strength and the best possible alignment
Will accept our great-looking oil tanks, our one-piece round top fenders and gas tanks
Axles are 1" in diameter
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2" belt on 300 width tires or chain on 330 width tires
Gas Tanks
STRUTS SOLD SEPARATELY
Oil Tanks
Fwd
Controls
Kickstands
2 swingarm styles to choose from
Handlebars
Exhaust
Dagger
Misc.
10
Frames
Curved Dagger
CURVED DUAL DOWN TUBE SOFTAIL-STYLE FRAMES
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K16125 K16126
K16127
K16128
Style
Tire Width Tubing
RakeUp Stretch Back Bone Str. Back Bone
Softail
300-330
Softail
300-330
Softail 300-330
Softail 300-330
1-1/4"
1-1/4"
1-1/4"
1-1/4"
0"
5"
38º
5"
40º 0"
-2"
5"
38º
-2"
5"
40º
Gas Tanks
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Curved Dagger
Part #
K16129 K16130
K16131
K16132
Style
Tire Width Tubing
Softail
300-330
Softail
300-330
Softail 300-330
Softail 300-330
Exhaust
1-1/4"
1-1/4"
1-1/4"
1-1/4"
RakeUp Stretch Back Bone Str. Back Bone
0"
5"
38º
5"
40º 0"
-2"
5"
38º
-2"
5"
40º
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Misc.
Frames
11
Frames
SOFTAIL-STYLE FRAMES / 1-1/8” TUBING / STOCK WIDTH
* Frames are designed for removable transmission plate
* Engineered for use with 1987-1999 rear section assemblies (Rear section not included) see page 78
* Come equipped with stock coil & oil tank mounts, and accept Softail style flatside gas tanks
* Available with neck rakes of 30º / 34º / 38º
Swingarms
Fenders
Struts
Gas Tanks
Sold Separately
Oil Tanks
Part #
Style
K15001 Softail
Fwd
Controls
Tire Width Tubing
Stock
RakeUp Stretch
1-1/8" 30º
0"
Kickstands
Handlebars
Sold Separately
Exhaust
Misc.
Part #
Style
K15002 Softail
K15003 Softail
Tire Width Tubing
2"
Stock
1-1/8" 34º
2"
Stock1-1/8"
38º
12
Frames
RakeUp Stretch Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
AS SHOWN IN THESE PICTURES ALL STOCK COMPONENTS BOLT RIGHT ON
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
13
Frames
* Designed for 180 width tire w/1-1/2” belt or 200 width tire with chain
* Offset built into frame / no spacing is required
* Stock motor and transmission bolt-in...this frame uses removable trans plate
Swingarms
Kit Included
Fenders
Struts
Sold Separately
Gas Tanks
Oil Tanks
Part #
Style
Tire Width Tubing
K15010 Softail
180
180
K15011 Softail
K15012
Softail 180
Fwd
Controls
1-1/4" 30º
0"
1-1/4"
34º
2"
1-1/4"
38º
2"
Rear Section
Rear Section
Rear Section
Sold Separately
Kickstands
Kit Included
Handlebars
Sold Separately
Exhaust
Misc.
Part #
Style
K15017 Softail
K15018 Softail
14
Tire Width Tubing
180
180
1-1/4" 34º
1-1/4" 38º
Frames
Sold Separately
4"
4"
1-1/2"
1-1/2"
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
15
Frames
SOFTAIL-STYLE FRAMES FOR TWIN CAM B-MOTOR
* Replacement style frames designed for stock components
* Frames use 2000-up Twin Cam B-Motor and transmission
* Manufactured from 1-1/4” diameter DOM steel
* Available with 30º and 35º neck rake angles
* These frames are sold without
rear sections, use your stock
rear section assembly
Swingarms
1-1/4” TUBING / STOCK WIDTH
Fenders
Struts
ALL FRAMES COME COMPLETE
WITH A MANUFACTURER’S
STATEMENT OF ORIGIN
Gas Tanks
Oil Tanks
Part #
Style
K10065 Softail
K10068 Softail
Fwd
Controls
Tire Width Tubing
Stock
Stock
RakeUp Stretch
1-1/4" 30º
1-1/4"
35º
0"
0"
1-1/4” TUBING / 180-200 TIRE WIDTH
* Enhance the overall performance
and looks of your Twin Cam B-Motor
project by using these KRAFT/TECH frames
and rear section assemblies
* These frames accept 2000-up Softail Twin
Cam B-motors and transmssions
* Available with a neck rake angle of 30º or 35º
* Frames accept most other stock
components
Kickstands
Handlebars
Exhaust
Kit Included
Misc.
Part #
Style
K10066 Softail
K10069 Softail
16
Tire Width Tubing
180-200
180-200
Frames
RakeUp Stretch
1-1/4" 30º
1-1/4"
35º
0"
0"
SOFTAIL-STYLE FRAMES FOR TWIN CAM B-MOTORS
Frames
* Large 1-3/8” diameter DOM steel tubing, mandrel bent
* Frames are TIG-MIG welded
* These beauties come complete with rear sections assembly
* These frames accept 2000-up Softail Twin Cam B-motors and transmissions
* Frames also accept most other stock components
* Available with neck rake angles of 30º, 35º and 38º with front leg stretches of 0” and 2”
Swingarms
Fenders
Struts
ALL FRAMES COME COMPLETE WITH A MANUFACTURER’S STATEMENT OF ORIGIN
1-3/8” MEGA-TUBE / STOCK WIDTH
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
optional
K10070
K10071
K10072
K10073
Style
Exhaust
Add the letter "H" after the part
# for a hidden axle rear section
Kit Included
Part #
standard
Tire Width Tubing
Softail
Stock
Softail
Stock
Softail Stock
Softail
Stock
1-3/8"
1-3/8"
1-3/8"
1-3/8"
30º
35º
35º
38º
0"
0"
2"
2"
Rear SectionAssembly
Misc.
Frames
17
Frames
SOFTAIL-STYLE FRAMES / 1-3/8” MEGA-TUBE
* Available in 1-3/8” diameter DOM steel tube, mandrel bent
* Backbones are beefy 1-1/2” steel tubing * All frames are TIG-MIG welded
* Frames will accept Evolution (except Twin Cam motors), Shovelhead & Panhead
engines with clearance for cylinders .200” taller than stock Evo height
* Frames accept Softail-type transmissions, 5 or 6-speed
* Sold complete with rear section and component kit
* We now offer optional 1-3/8” Mega-Tube rear sections featuring our newly designed hidden axle
we include a set of high quality, polished stainless cover plates complete with mounting hardware
Swingarms
Fenders
Struts
To order any 1-3/8” Mega-Tube frame with
a hidden axle rear section, simply add the
letter “H” after the part number
Gas Tanks
NECKS are CNC machined
from solid steel
optional
GAS TANK MOUNTS on frames with
2” & 4” stretches accept one piece tanks
Frames with 8” front rail stretches are
delivered without gas tank mounts
SPLASH GUARD
mounts welded in
place
Oil Tanks
STRUTS are CNC machined
Front & rear OIL TANK MOUNTS
accept stock style Softail or
custom oil tanks
NECK RAKE
configurations
35º / 38º
Fwd
Controls
1-1/2” BACKBONE tubing
Kickstands
REAR AXLES . . .230/240/250
frames come with 1” axles,
whereas the 180 & 200 style
frames are delivered with 3/4”
axles
All frames come complete
with a Manufacturer’s
Statement of Origin
REAR MOTOR MOUNT
AXLE CARRIERS are
precision machined
billet steel offered with
open axle or can be
ordered with the optional
“hidden axle” set-up by
simply adding the letter
“H” after the part number
Handlebars
BRAKE ANCHOR tab
for 1987-99 Softail type
calipers
Stainless steel, flush
mount PIVOT BOLT
Exhaust
18
Frames
FRONT RAIL STRETCH
configurations
2” / 4” / 8”
Solid steel FRONT MOTOR MOUNT
Built-in offsets on wide tire frames
Provision for OIL TANK DRAIN
LINE...slip the line over this and
remove the threaded plug from
the bottom (plug not supplied )
Newly designed SIDE PLATES,
radiused and contoured
Misc.
S.N. BOSS
Frames are set up for Softail-style
SHOCKS, 1987-1999 type
Welded-in 1-piece TRANSMISSION PLATE
with built-in offset (wide tire models)
Provides unit construction strength & best
possible driveline alignment
1-3/8” REAR SECTIONS w/OPTIONAL HIDDEN AXLE
We now offer optional 1-3/8” Mega-Tube rear sections featuring our newly designed hidden axle.
The axle plates on the rear section have been engineered to accept the axle in such a manner so as to virtually
eliminate any unnecessary creeping under high horsepower loads.
To keep all of this concealed we include a set of high quality, polished stainless cover plates complete with
mounting hardware
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Standard Axle Rear Section
Fwd
Controls
TO ORDER ANY 1-3/8” MEGA-TUBE SOFTAIL-STYLE FRAME WITH A “HIDDEN AXLE” REAR SECTION,
SIMPLY ADD THE LETTER “H” AFTER THE PART NUMBER
Kickstands
Handlebars
Exhaust
Misc.
Optional Hidden Axle Rear Section
Frames
19
Frames
SOFTAIL-STYLE FRAMES / 1-3/8” MEGA-TUBE / 180 TIRE WIDTH
* Designed for 180 width tire w/ 1-1/2” belt or 200 tire with chain
* Offset built into frame. . . no spacing required
* Feature an integral 1-piece trans plate
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
Oil Tanks
Part #
Fwd
Controls
standard
Style
Tire Width Tubing
K19004 Softail
180
K19005 Softail
180
1-3/8" 35º
2"
1-3/8"
38º
2"
Kickstands
Rear Section Assembly and Fork Cup Kit
Kit Included
Handlebars
Exhaust
optional
standard
Misc.
Part #
Style
Tire Width Tubing
K19006 Softail
180
K19007 Softail
180
20
Frames
1-3/8" 35º
4"
1-3/8"
38º
4"
1"
1"
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Part #
Style
Tire Width Tubing
K19008 Softail
180
K19009 Softail
180
Oil Tanks
1-3/8" 35º
8"
1-3/8"
38º
8"
4"
4"
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
21
Frames
* These frames are set up for 200 tires with a 1-1/2” belt (or chain)
* Offset is built-into frame. . . use 1/2” spacer between engine & inner primary
cover and 1/2” longer spacing on engine sprocket or pulley
* Frames feature an integral 1-piece trans plate for strength & superior driveline alignment
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
Oil Tanks
Part #
Fwd
Controls
standard
Style
Tire Width Tubing
K19010 Softail
200
K19011 Softail
200
1-3/8" 35º
2"
1-3/8"
38º
2"
Kickstands
Kit Included
Handlebars
optional
Exhaust
standard
Part #
Misc.
Style
Tire Width Tubing
K19012 Softail
200
K19013 Softail
200
22
Frames
1-3/8" 35º
4"
1-3/8"
38º
4"
1"
1"
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Part #
Style
Tire Width Tubing
K19014 Softail
200
K19015 Softail
200
Oil Tanks
1-3/8" 35º
8"
1-3/8"
38º
8"
4"
4"
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
23
Frames
Swingarms
SOFTAIL-STYLE FRAMES / 1-3/8” MEGA-TUBE / 230/240/250 TIRE WIDTH
* Designed for 230/240 width tires w/1-1/2” belt, or 250 width tire w/1-1/8” belt (or chain)
* Offset is built into frame. . . use 1” spacer between engine and the inner primary cover,
and 1” additional spacing on engine sprocket or pulley
* As with all frames in this section, our integral 1-piece trans plate is welded to the frame
Fenders
Struts
Kit Included
Gas Tanks
optional
Oil Tanks
Part #
Fwd
Controls
standard
Style
Tire Width Tubing
K19016 Softail
230/240/250 1-3/8" 35º
2"
K19017 Softail
230/240/250 1-3/8"
38º
2"
Kickstands
Rear Section Assembly,1" Axle & Fork Cup Kit
Kit Included
Handlebars
Exhaust
Misc.
optional
standard
Part #
Style
Tire Width Tubing
K19018 Softail
230/240/250 1-3/8" 35º
4"
K19019 Softail
230/240/250 1-3/8"
38º
4"
24 Frames
1"
1"
SOFTAIL-STYLE FRAMES / 1-3/8” MEGA-TUBE / 230/240/250 TIRE WIDTH
Frames
Swingarms
Kit Included
Fenders
Struts
Gas Tanks
optional
standard
Oil Tanks
Part #
Style
Tire Width Tubing
K19020 Softail
230/240/250 1-3/8" 35º
8"
1-3/8"
K19021 Softail
230/240/250
38º
8"
4"
4"
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
25
Frames
SINGLE DOWNTUBE SOFTAIL-STYLE FRAMES / 1-3/8” MEGA-TUBE w/HIDDEN AXLE
Swingarms
Fenders
Struts
The line of single downtube frames demonstrates KRAFT/TECH’s commitment to quality & affordability without compromise.
* Frames for 180/230/240/250 tires . . 2” downtube 1-3/4” backbone, 1-3/8” thereafter, all DOM steel tubing, mandrel bent
* Frames come with 38º or 40º neck rake angles, with front leg stretches of 2”, 4” or 8”
* Engineered with a super-strong upper frame design with integral neck webbing that offers unparalleled strength with pleasing asthetics
* Single downtube merges with lower frame rails in such a way as to continue the frame’s smooth lines, often overlooked on other frames
* These Softail-style beauties are delivered complete with billet hidden axle rear section
* Component kit consists of pivot axle w/flush mount stainless pivot bolts and bearings
* Frames are set-up with offset already built-in (requires only simple spacing of engine sprocket or pulley, 230-240-250 frames
use 1” spacing between engine and inner primary cover, 180 frames require no spacing)
* Integral one-piece trans mounting plate is part of the frame structure, assuring unit construction strength and the best possible alignment
* Will accept our great-looking oil tanks and of course, our huge selection of one-piece round top fenders.
* Axles for the 180 tire are 3/4” in diameter and the 230-240-250 are 1” in diameter
* Frames accept any 5 or 6-speed Softail-style transmission together with 1-1/2” belt on 180/230/240 width tires
or 1-1/8” belt or chain on 250 width tires
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Part #
Exhaust
K19050
K19051
K19052
K19056
K19057
K19058
Misc.
26
Frames
Style
Softail
Softail
Softail
Softail Softail
Softail
Tire Width Tubing
180
180
180
180
180
180
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
Rake Up Stretch Back Bone Str. Downtube
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Part #
K19053
K19054
K19055
K19059
K19060
K19061
Style
Softail
Softail
Softail
Softail Softail
Softail
Tire Width Tubing
230/240/250 1-3/8"
230/240/250 1-3/8"
230/240/250 1-3/8"
230/240/250 1-3/8"
230/240/250 1-3/8"
230/240/250 1-3/8"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
Exhaust
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Frames
Misc.
27
Frames
SINGLE DOWNTUBE SOFTAIL-STYLE FRAMES / 1-1/2” MEGA-TUBE w/HIDDEN AXLE
This line of single down tube frames demonstrates KRAFT/TECH’s commitment
Swingarms
Fenders
Struts
Gas Tanks
*
*
*
*
*
*
*
*
*
*
*
Frames for 240/250/280/300/330 tires…2” Down tube 1-3/4” backbone, 1-1/2” thereafter, all DOM steel tubing, mandrel bent
Frames come with 38º or 40º neck rake angles, with front leg stretches of 2”, 4”, or 8”
Single down tube merges with lower frame rails in such a way as to continue the frame’s smooth lines, often overlooked on other frames
Component kit consists of pivot axle w/flush mount stainless pivot bolts and bearings
Will accept our great-looking oil tanks and of course, our one-piece round top fenders.
Axles are 1” in diameter
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2” belt on 250, and
300 width tires or chain on 330 width tires
Oil Tanks
Fender, Splash Guard
and Oil Tank Sold
Separately
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
28
Frames
Curved Dagger
RSD SOFTAIL-STYLE FRAMES FOR 240/250 TIRES
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Dagger
Part #
K19590
K19593
K19596
K19599
K19602
K19605
Style
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
29
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Curved Dagger
Part #
K19591
K19594
K19597
K19600
K19603
K19606
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
30
Frames
Style
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
SOFTAIL-STYLE FRAMES FOR 280 TIRES
280 FRAMES
Frames
SPECIAL ORDER ONLY
Swingarms
Kit Included
Fenders
Struts
Dagger
Part #
K19302
K19305
K19308
K19311
K19314
K19317
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
SOFTAIL-STYLE FRAMES FOR 300/330 TIRES
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
Gas Tanks
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Dagger
Part #
K19320
K19323
K19326
K19329
K19332
K19335
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
Exhaust
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Frames
Misc.
31
Frames
280 FRAMES
SPECIAL ORDER ONLY
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Curved Dagger
Part #
Style
K19303
K19306
K19309
K19312
K19315
K19318
Oil Tanks
Fwd
Controls
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
1-3/4"
2"
Kickstands
Handlebars
Kit Included
Curved Dagger
Exhaust
Part #
K19321
K19324
K19327
K19330
K19333
K19336
Misc.
32
Frames
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
SOFTAIL STYLE FRAMES FOR 300 OR 330 TIRES w/CHAIN
*
*
*
*
*
*
*
*
*
*
*
Frames
Frames for 300/330 tires…2” Down tube, 1-3/4” backbone, 1-1/2” thereafter, all DOM steel tubing, mandrel bent
Frames come with 40º neck rake angles, with front leg stretches of -2” and 0”
These Softail-style beauties are delivered complete with billet steel hidden axle rear section
Component kit consists of our pivot axle w/flush mount stainless pivot axle bolts and bearings
Will accept our great-looking oil tanks and of course, our one-piece round top fenders and our custom stretched gas tanks
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2” belt or chain on 300 width
tires or chain on 330 width tires
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Kit Included
Curved Dagger
Part #
K19715
K19716
Style
Softail
Softail
Tire Width Tubing
300/330
300/330
1-1/2" 40º
1-1/2"
40º
0"
-2"
5"
5"
Fwd
Controls
Backbone
2"
1-3/4"
2"
1-3/4"
Kickstands
Handlebars
Exhaust
Misc.
Frames
33
Frames
SINGLE DOWN TUBE SOFTAIL-STYLE FRAMES FOR TWIN CAM-B MOTORS
1-1/2” MEGA-TUBE w/HIDDEN AXLE
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
34
Frames
Curved Dagger
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19464
K19467
K19470
K19473
K19476
K19479
Style
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
Gas Tanks
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Curved Dagger
Part #
K19465
K19468
K19471
K19474
K19477
K19480
Style
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Backbone
Exhaust
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
2"
1-3/4"
Frames
Misc.
35
Frames
CURVED DUAL DOWN TUBE SOFTAIL-STYLE FRAMES
1-1/2" MEGA-TUBE w/HIDDEN AXLE
Swingarms
Fenders
Struts
Gas Tanks
This line of curved dual down tube frames demonstrates KRAFT/TECH's commitment
*
*
*
*
*
*
*
*
*
*
*
Frames for 300/330 tires 1-1/2" down tubes 1-3/4" backbone, 1-1/2" thereafter, all DOM steel tubing, mandrel bent
Frames come with 38 degree or 40 degree neck rake angles, with front leg stretches of 0" or -2"
Dual down tubes curve smoothly and flow continuously to become the lower frame rails
Will accept our great-looking oil tanks, our one-piece round top fenders and gas tanks
Axles are 1" in diameter
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2" belt on 300 width tires or chain on 330 width tires
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
36
Frames
Curved Dagger
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19800
K19801
K19802
K19803
Style
Softail
Softail
Softail
Softail
Gas Tanks
Tire Width Tubing
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake Up Stretch Back Bone Str. Backbone
38º
40º
38º
40º
0"
0"
-2"
-2"
5"
5"
5"
5"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Curved Dagger
Part #
K19804
K19805
K19806
K19807
Style
Softail
Softail
Softail
Softail
Exhaust
Tire Width Tubing
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
40º
38º
40º
0"
0"
-2"
-2"
5"
5"
5"
5"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Misc.
Frames
37
Frames
SOFTAIL-STYLE FRAMES / 1-1/2” MEGA-TUBE w/HIDDEN AXLE
This line of double down tube frames demonstrates KRAFT/TECH’s commitment
Swingarms
Fenders
Struts
*
*
*
*
*
*
*
*
*
*
Frames for 240/250/280/300/330 tires…1-3/4” backbone, 1-1/2” thereafter, all DOM steel tubing, mandrel bent
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2” belt on 280 and 300 width tires
or chain on 330 width tires
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Dagger
38
Frames
Curved Dagger
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19626
K19629
K19632
K19635
K19638
K19641
Style
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Gas Tanks
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Kit Included
Handlebars
Curved Dagger
Part #
K19627
K19630
K19633
K19636
K19639
K19642
Style
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
RSD Softail
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Exhaust
Misc.
Frames
39
Frames
280 FRAMES
SPECIAL ORDER ONLY
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Dagger
Part #
Style
K19374
K19377
K19380
K19383
K19386
K19389
Oil Tanks
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Fwd
Controls
Kickstands
Kit Included
Handlebars
Dagger
Part #
Exhaust
K19392
K19395
K19398
K19401
K19404
K19407
Misc.
40
Frames
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Frames
280 FRAMES
SPECIAL ORDER ONLY
Swingarms
Fenders
Struts
Kit Included
Curved Dagger
Part #
K19375
K19378
K19381
K19384
K19387
K19390
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Gas Tanks
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Kit Included
Handlebars
Curved Dagger
Part #
K19393
K19396
K19399
K19402
K19405
K19408
Style
Softail
Softail
Softail
Softail
Softail
Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Exhaust
Misc.
Frames
41
Frames
SOFTAIL-STYLE FRAMES FOR TWIN CAM-B MOTORS
Swingarms
Fenders
Struts
Gas Tanks
*
*
*
*
*
*
*
*
*
*
*
Frames for 300/330 tires…1-3/4” backbone, 1-1/2” thereafter, all DOM steel tubing, mandrel bent
These frames accept 2000-up Twin Cam B-Motors
Frames accept any 5 or 6-speed Right Side Drive Twin Cam B-style transmission together with 1-1/2” belt on 300 width tires
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
42
Frames
Curved Dagger
88B SOFTAIL-STYLE FRAMES FOR 300 OR 330 TIRES w/CHAIN
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19536
K19539
K19542
K19545
K19548
K19551
Style
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
Gas Tanks
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Kit Included
Handlebars
Curved Dagger
Part #
K19537
K19540
K19543
K19546
K19549
K19552
Style
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
88B Softail
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
38º
38º
38º
40º
40º
40º
2"
4"
8"
2"
4"
8"
5"
6-1/2"
8-1/2"
5"
6-1/2"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Exhaust
Misc.
Frames
43
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Rigids
Kickstands
Handlebars
Exhaust
Misc.
44
Frames
Frames
RIGID FRAMES / 1-1/4” TUBING
* All DOM steel tubing, mandrel bent * TIG-MIG welded
* Frames will accept Evolution motors (except Twin Cam), Shovelhead & Panhead engines
with clearance for cylinders up to .200” taller than stock Evolution
* Run a 5 or 6-speed Softail-type transmission in these frames
Swingarms
GAS TANK MOUNTS are welded to the frame and accept
Softail-style flatside tanks
Beefy 1-1/2” tubing used on all
FRAME BACKBONES
Fenders
Struts
NECKS are CNC machined
from solid steel
REAR FENDER MOUNTS provide
a solid, secure platform for fastening
a wide variety of fenders
Gas Tanks
OIL TANK MOUNTS are set-up
to accept stock or custom
Softail-style oil tanks,with purchase of K13006 rear mounting
bracket
Oil Tanks
REAR AXLE CARRIERS
are solid steel
230/240/250 frames come
with our 1” axle, whereas
the stock width, 180 & 200
width frames are
delivered with 3/4” axles
NECK RAKE angles
30º / 34º / 38º
All
Fwd
Controls
frames come complete
Manufacturer’s
Statement of Origin
with a
S.N. BOSS
Kickstands
FRONT RAIL STRETCHES of
0” / 2 “ / 4” / 8”
Provision for 1986-1999
Softail-style BRAKE CALIPERS
and caliper brackets
TRANSMISSION PLATES are available
in welded-in, one-piece versions
with built-in offsets, providing the best
possible driveline alignment as well as
unit construction strength
(Some models are designed for use with
traditional-type trans plate)
REAR MOTOR MOUNT is
milled after welding
Handlebars
FRONT MOTOR MOUNT is solid steel
Wide tire models have built-in offsets
Exhaust
Frame shown is 4” stretch model
Misc.
Frames
45
Frames
RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH
* Frames use stock width disc brake wheel, 1986-1999 Softail-style brakes, axles and spacers
* Run a 1-1/2” belt (or chain) * Frame is made with an integral 1-piece transmission mount for Softail-style 5-speeds
* Component kits are included, where indicated
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Part #
Style
Up Stretch
30º
0"
34º
2"
K16051
K16052 Rigid
Rigid
Tire Width Tubing
Stock
Stock
1-1/4"
1-1/4"
Rake
Kickstands
Handlebars
Kit Included
Exhaust
Misc.
Part #
Style
K16054
K16055 Frames
Stock
Stock
1-1/4"
1-1/4"
Rake
Up Stretch Back Bone Str. Includes
34º
4"
1-1/2"
38º
4"
1-1/2"
46
Rigid
Rigid
Tire Width Tubing
Fork Cup Kit
Fork Cup Kit
RIGID FRAMES / 1-1/4” TUBING / 180 TIRE WIDTH
Frames
* Designed for 180 width tire w/1-1/2” belt or 200 width tire with a chain
* Offset built into frame...no spacing required * Stock motor and transmission bolt right in without modification
* Trans mount built into frame, providing additional strength & accurate driveline alignment
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Sold Separately
Oil Tanks
Part #
K16056
K16057 K16058
Style
Tire Width
Rigid
180
Rigid
180
Rigid 180
Up Stretch Includes
30º
0"
Axle Kit
34º
2"
Axle Kit
38º
2"Axle Kit
Tubing
1-1/4"
1-1/4"
1-1/4"
Rake
Fwd
Controls
Kickstands
Kit Included
Handlebars
Exhaust
Sold Separately
Part #
Style
Axle & Fork Cup Kit
34º
4"
1-1/2"
Axle & Fork Cup Kit
38º
4"
1-1/2"
K16060
K16061 Rigid
Rigid
Tire Width Tubing
180
180
1-1/4"
1-1/4"
Rake
Frames
Misc.
47
Frames
* Designed for 200 width tire w/1-1/2” belt or chain
* Offset is built into the frame...use 1/2” spacer between engine and inner primary cover
use 1/2” longer spacing on engine sprocket or pulley
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Oil Tanks
Part #
K16074 Style
Rigid
Fwd
Controls
Tire Width Tubing
1-1/4"
200
Rake
34º
4"
1-1/2"
Axle & Fork Cup Kit
Kickstands
Kit Included
Handlebars
Exhaust
Part #
Misc.
K16063 K16064
48
Frames
Style
34º
8"
4"
Axle & Fork Cup Kit
38º
8"
4"
Axle & Fork Cup Kit
Rigid
Rigid
Tire Width Tubing
200
200
1-1/4"
1-1/4" Rake
RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH
Frames
* Designed for 230/240 tires using a 1-1/2” belt (or chain), and 250 width tires using a 1-1/8” belt (or chain)
* 1-piece transmission mount is welded to frame and provides unit construction strength & better driveline alignment
* Offset is built into frame...use 1” spacer between engine and inner primary cover
use 1” spacer on engine sprocket or pulley
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Oil Tanks
Part #
K16066 K16068
Style
Rigid
Rigid
Tire Width Tubing
230/240/250 1-1/4"
230/240/250 1-1/4" Rake
Up Stretch Includes
34º
2"
1" Axle Kit
38º
2"
1" Axle Kit
Fwd Controls
Kickstands
Kit Included
Handlebars
Exhaust
Part #
K16071 K16073
Style
Rigid
Rigid
Tire Width Tubing
230/240/250 1-1/4"
230/240/250 1-1/4" Rake
34º
4"
1-1/2"
38º
4"
1-1/2"
Misc.
Axle & Fork Cup Kit
Axle & Fork Cup Kit
Frames
49
Frames
RIGID FRAMES / 1-1/4” TUBING / STOCK WIDTH
* Frames are designed for removable transmission plate for chain drive 4 and 5-speeds
* Uses stock width disc brake wheel, Softail-style brakes (pre-2000), axle & adjusters
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Part #
K16001 K16002
Rigid
Rigid
Tire Width Tubing
1-1/4"
Stock
Stock 1-1/4" Frames
Rake
Up Stretch
30º
0"
34º
2"
Misc.
50
Style
Frames
* Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain
* Offset built into frame. . .no spacing required
* Accepts 4 or 5-speed transmissions
* Requires using a removable trans plate
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Sold Separately
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Part #
K16006 K16007
K16008
Style
Tire Width Tubing
Rigid
180
Rigid
180
Rigid 180
1-1/4"
1-1/4" 1-1/4"
Rake
Up Stretch Includes
30º
34º
38º
0"
2"
2"
Exhaust
Axle Kit
Axle Kit
Axle Kit
Misc.
Frames
51
Frames
* Frames are engineered for 180 tire w/ 1-1/2” belt or 200 tire with chain
* Offset built into frame. . .no spacing required
* Accepts 4 or 5-speed transmissions
* Requires using a removable trans plate
Swingarms
Fenders
Struts
Gas Tanks
Kit Included
Oil Tanks
Sold Separately
Fwd
Controls
Kickstands
Handlebars
Exhaust
Part #
Style
K16010 K16011
Misc.
52
Frames
Rigid
Rigid
Tire Width Tubing
180
180
34º
4"
1-1/2"
Axle & Fork Cup Kit
38º
4"
1-1/2"
Axle & Fork Cup Kit
1-1/4"
1-1/4" Rake
Frames
RIGID FRAMES / 1-1/4” TUBING / 230/240/250 TIRE WIDTH
* Run a 230/240 tire with a 1-1/2” belt or chain, 250 tire with 1-1/8” belt or chain
* Offset built into frame. . .requires 1” spacing between engine & inner primary cover and 1” spacer on engine sprocket or pulley
* Accepts 5-speed transmissions
* Requires using a removable transmission plate
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Part #
Style
K16016 Rigid
Tire Width Tubing
230/240/250 1-1/4"
Rake
Up Stretch Includes
38º
2"
Axle Kit
Misc.
Frames
53
Frames
RIGID FRAMES / 1-3/8” MEGA-TUBE
* Crafted from beefy 1-3/8” diameter DOM steel tubing, the rigid frames that follow represent
KRAFT/TECH’s commitment to mating sound engineering with design excellence and functionality
* Frames will accept Evolution engines (except Twin Cam) as well as Shovelhead & Panhead with
clearance for cylinders up to .200” taller than stock Evo
* All frames are TIG-MIG welded
* Run a 5 or 6-speed Softail-type transmission in these frames
* We now offer optional 1-3/8” Mega-Tube rear sections featuring our newly designed hidden axle
we include a set of high quality, polished stainless cover plates complete with mounting hardware
Swingarms
Fenders
Struts
All frames come complete with a Manufacturer’s Statement of Origin
To order any 1-3/8” Mega-Tube frame with
a hidden axle rear section, simply add the
letter “H” after the part number
Gas Tanks
NECKS are CNC
machined from solid steel
BACKBONE STRETCHES
of 1” and 4”
FRAME BACKBONES
are 1-1/2” steel tubing
Oil Tanks
optional
Fwd
Controls
OIL TANK MOUNTS accept
Softail-style and custom
oil tanks
SEAT BRACKET
is adjustable
NECK RAKE
angles
35º / 38º
REAR FENDER MOUNTS are welded
in place and provide sturdy support
S.N. BOSS
BELT GUARD TABS
are welded in place
Kickstands
REAR AXLES are supplied
180 & 200 frames use 3/4”
axles 230/240/250 frames are
supplied with 1” axles
REAR MOTOR MOUNT
FRONT RAIL
stretches
2” / 4” / 8”
FRONT MOTOR
MOUNT is solid steel
Wide tire models have
built-in offsets
Handlebars
AXLE CARRIERS are
precision machined
billet steel offered with
open axle or can be
ordered with the optional
“hidden axle” set-up by
simply adding the letter
“H” after the part number
Exhaust
REAR BRAKE MOUNT accepts
1987-99 Softail-type calipers/brkts
Misc.
54
Frames
FORK CUP/RACE KIT supplied
Cups feature integral fork stops
Hose connection for
OIL TANK DRAIN LINE
TRANSMISSION PLATE/PLATFORM
is a welded-in, 1-piece assembly
with built-in offset. . . this set-up
results in accurate driveline alignment
as well as provide overall strength
1-3/8” RIGID FRAMES w/OPTIONAL HIDDEN AXLE
* We now offer 1-3/8” rigid frames with our newly designed hidden axle carriers
* The axle plates have been engineered to accept the axle in such a manner as to virtually eliminate
any unnecessary creeping under high horsepower loads
* To keep all of this concealed we include a set of high quality, polished stainless cover plates
complete with mounting hardware
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Standard Axle Rear Section
Fwd
Controls
TO ORDER ANY 1-3/8” MEGA-TUBE RIGID FRAME WITH " HIDDEN AXLE "
CARRIERS, SIMPLY ADD THE LETTER “H” AFTER THE PART NUMBER
Kickstands
Handlebars
Exhaust
Misc.
Optional Hidden Axle Rear Section
Frames
55
Frames
RIGID FRAMES / 1-3/8” MEGA-TUBE / 180 TIRE WIDTH
* The offset is built into the frame...no spacing is required
* Gas tank mounts on frames with 2” & 4” stretches accept one piece tanks
Frames with 8” front rail stretches are delivered without gas tank mounts
* Stock motor and transmission bolt right in
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Oil Tanks
Part #
Style
K19107 K19108
Fwd
Controls
Rigid
Rigid
Tire Width Tubing
180
180
1-3/8"
1-3/8" Rake
35º
38º
Up Stretch Includes
2"
2"
Axle & Fork Cup Kit
Axle & Fork Cup Kit
Kickstands
Kit Included
Handlebars
optional
Exhaust
standard
Misc.
Part #
Style
K19109 K19110
56
Frames
Rigid
Rigid
Tire Width Tubing
180
180
35º
4"
1"
Axle & Fork Cup Kit
38º
4"
1"
Axle & Fork Cup Kit
1-3/8"
1-3/8" Rake
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Part #
K19111 K19112
Style
Rigid
Rigid
Oil Tanks
Tire Width Tubing
180
180
1-3/8"
1-3/8" Rake
35º
8"
4"
38º
8"
4"
Axle & Fork Cup Kit
Axle & Fork Cup Kit
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
57
Frames
CURVED DAGGER RIGID FRAMES / 1-3/8” MEGA-TUBE / 180 TIRE
* The offset is built into the frame...no spacing is required
* To provide unit construction strength and best possible driveline alignment,
all of these models have our welded-in, 1-piece transmission plate
* Includes 3/4” axle and axle cover kits
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Curved Dagger
Part #
K19701
Kickstands
Handlebars
Exhaust
Misc.
58
Frames
Style
Rigid
Tire Width
180/200
Kit Included
Tubing
1-3/8"
Rake
34º
Up Stretch Back Bone Str.
0"
2"
CURVED DAGGER RIGID FRAMES / 1-3/8” MEGA-TUBE
230/240/250 TIRE WIDTHS
Frames
* Designed for 230/240 width tires using a 1-1/2” belt or 250 tire with a 1-1/8” belt (or chain)
* These frames have the offset built into them...use a 1” spacer between the engine
and inner primary cover, and an additional 1” of spacing on the engine sprocket or pulley
* Includes 1” axle and axle cover kits
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Curved Dagger
Part # Style Tire Width
K19702
Rigid
230/240/250
Kit Included
Tubing Rake Up Stretch
1-3/8"
34º
0"
Fwd
Controls
Back Bone Str.
2"
Kickstands
Handlebars
Exhaust
Misc.
Frames
59
Frames
* Run a 200 width tire with a 1-1/2” belt on this frame
* Offset is built into the frame...use 1/2” spacer between engine and
inner primary cover, and 1/2” longer spacing on engine sprocket or pulley
* Like the other frames in this section, these crafted beauties feature our super strong,
welded-in 1-piece trans plates which provides the best possible driveline alignment
* Gas tank mounts on frames with 2” & 4” stretches accept one piece tanks
Frames with 8” front rail stretches are delivered without gas tank mounts
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Oil Tanks
Part #
Style
K19113 K19114
Fwd
Controls
Rigid
Rigid
Tire Width Tubing
200
200
1-3/8"
1-3/8" Rake
Up Stretch Includes
35º
2"
Axle & Fork Cup Kit
38º
2"
Axle & Fork Cup Kit
Kickstands
Kit Included
Handlebars
optional
Exhaust
standard
Part #
Style
K19115 K19116
Misc.
60
Frames
Rigid
Rigid
Tire Width Tubing
200
200
1-3/8"
1-3/8" Rake
35º
4"
1"
38º
4"
1"
Axle & Fork Cup Kit
Axle & Fork Cup Kit
Frames
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Part #
K19117 K19118
Style
Rigid
Rigid
Oil Tanks
Tire Width Tubing
200
200
35º
8"
4"
Axle & Fork Cup Kit
38º
8"
4"
Axle & Fork Cup Kit
1-3/8"
1-3/8" Rake
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
61
RIGID FRAMES / 1-3/8” MEGA-TUBE / 230/240/250 TIRE WIDTHS
Frames
* Designed for 230/240 width tires using a 1-1/2” belt or 250 tire with a 1-1/8” belt (or chain)
* These frames have the offset built into them...use a 1” spacer between the engine
and inner primary cover, and an additional 1” of spacing on the engine sprocket or pulley
* Includes 1” axle and fork cup kit
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
optional
standard
Oil Tanks
Part #
Style
K19119 K19120
Fwd
Controls
Rigid
Rigid
Tire Width Tubing
230/240/250 1-3/8"
230/240/250 1-3/8" Rake
35º
38º
Up Stretch Includes
2"
2"
1" Axle & Fork Cup Kit
Kickstands
Kit Included
Handlebars
optional
Exhaust
standard
Misc.
Part #
Style
K19121 K19122
62
Frames
Rigid
Rigid
Tire Width Tubing
35º
4"
1"
38º
4"
1"
230/240/250 1-3/8"
230/240/250 1-3/8" Rake
RIGID FRAMES / 1-3/8” MEGA-TUBE / 230/240/250 TIRE WIDTHS
Frames
Swingarms
Kit Included
Fenders
Struts
Gas Tanks
optional
standard
Oil Tanks
Part #
Style
K19123 K19124
Rigid
Rigid
Tire Width Tubing
230/240/250 1-3/8"
230/240/250 1-3/8" Rake
35º
8"
4"
38º
8"
4"
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Frames
63
Frames
SINGLE DOWNTUBE RIGID FRAMES / 1-3/8” MEGA-TUBE w/HIDDEN AXLE
The line of single downtube frames demonstrates KRAFT/TECH’s commitment to quality & affordability without compromise.
* Frames for 180/230/240/250 tires . . 2” downtube 1-3/4” backbone, 1-3/8” thereafter, all DOM steel tubing, mandrel bent
* Frames come with 38º or 40º neck rake angles, with front leg stretches of 2”, 4” or 8”
* Engineered with a super-strong upper frame design with integral neck webbing that offers unparalleled strength with pleasing asthetics
* Rear axle carriers are billet axle assembly which is hidden under the supplied stainless steel cover set
* Single downtube merges with lower frame rails in such a way as to continue the frame’s smooth lines, often overlooked on other frames
* Frames are set-up with offset already built-in (requires only simple spacing of engine sprocket or pulley, 230-240-250 frames
use 1” spacing between engine and inner primary cover, 180 frames require no spacing)
* Integral one-piece trans mounting plate is part of the frame structure, assuring unit construction strength and the best possible alignment
* Will accept our great-looking oil tanks and of course, our huge selection of one-piece round top fenders.
* Axles for the 180 tire are 3/4” in diameter and the 230-240-250 are 1” in diameter
* Frames accept any 5 or 6-speed Softail-style transmission together with 1-1/2” belt on 180/230/240 width tires
or 1-1/8” belt or chain on 250 width tires
Swingarms
Fenders
Struts
“
E
UB
T
A S
G
E
“ M 0 TIRE
Gas Tanks
18
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Part #
K19150
K19151
K19152
K19156
K19157
K19158
Exhaust
Misc.
64
Frames
Style
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Tire Width Tubing
180
180
180
180
180
180
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
Rake
38º
38º
38º
40º
40º
40º
Up Stretch Back BoneStr. Downtube Back Bone
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Frames
Swingarms
Fenders
Struts
FRA
MES
AVA
230
ILAB
-24
LE F
0-2
OR
50
TIR
ES
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Style Part
PartP#art
# # Style
K19153Rigid
K19153
K19153
Rigid
K19154Rigid
K19154
K19154
Rigid
K19155
Rigid
K19155
K19155 Rigid
K19159 Rigid
K19159
K19159
Rigid
K19160 Rigid
K19160
K19160
Rigid
K19161 Rigid
K19161
K19161
Rigid
Tire
Tubing
TireWWidth
idth
230/240/250
230/240/250 1-3/8"
230/240/250
230/240/250 1-3/8"
230/240/250
230/240/250 1-3/8"
230/240/250
230/240/250 1-3/8"
230/240/250
230/240/250 1-3/8"
230/240/250
230/240/250 1-3/8"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Exhaust
Misc.
Frames
65
Frames
SINGLE DOWNTUBE RIGID FRAMES /1-1/2” MEGA-TUBE w/HIDDEN AXLE
*
*
*
*
*
*
*
*
*
Swingarms
Fenders
Struts
Frames for 240/250/280/300/330 tires…2” Down tube 1-3/4” Backbone, 1-1/2” Thereafter, all DOM steel tubing, mandrel bent
Billet axle carriers are available in 2 styles: Dagger and Curved Dagger. Comes with axle cover set.
Frames accept any 5 or 6-speed Right Side Drive Softail-style transmission together with 1-1/2” belt on 250, 280 and 300 width tires
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
66
Frames
Curved Dagger
RSD RIGID FRAMES FOR 240/250 TIRES
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19608
K19611
K19614
K19617
K19620
K19623
Style
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
Gas Tanks
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Kit Included
Handlebars
Curved Dagger
Part #
K19609
K19612
K19615
K19618
K19621
K19624
Style
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
RSD Rigid
Tire Width Tubing
240/250
240/250
240/250
240/250
240/250
240/250
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
Exhaust
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Misc.
Frames
67
Frames
RIGID FRAMES FOR 280 TIRES
280 FRAMES
SPECIAL ORDER ONLY
Swingarms
Fenders
Struts
Kit Included
Gas Tanks
Dagger
Part #
Oil Tanks
Style
K19338
K19341
K19344
K19347
K19350
K19353
Fwd
Controls
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
RIGID FRAMES FOR 300/330 TIRES
Kickstands
Handlebars
Kit Included
Dagger
Exhaust
Misc.
Part #
K19356
K19359
K19362
K19365
K19368
K19371
68
Frames
Style
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
RIGID FRAMES FOR 280 TIRES
Frames
280 FRAMES
SPECIAL ORDER ONLY
Swingarms
Fenders
Struts
Kit Included
Curved Dagger
Part #
K19339
K19342
K19345
K19348
K19351
K19354
Style
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Tire Width Tubing
280
280
280
280
280
280
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
Gas Tanks
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
RIGID FRAMES FOR 300/330 TIRES
Fwd
Controls
Kickstands
Handlebars
Kit Included
Curved Dagger
Part #
K19357
K19360
K19363
K19366
K19369
K19372
Style
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
2"
2"
2"
2"
2"
Exhaust
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Misc.
Frames
69
Frames
Swingarms
RIGID FRAMES FOR TWIN CAM-B MOTORS
*
*
*
*
*
*
*
*
*
Fenders
Struts
Frames for 300/330 tires…1-3/4” backbone, 1-1/2” thereafter, all DOM steel tubing, mandrel bent
These frames accept 2000-up Twin Cam B-Motors
These Rigid beauties are delivered complete with billet hidden axle rear section
Rear axle carriers are available in 2 styles: Dagger and Curved Dagger. Axle Cover set included.
Frames accept any 5 or 6-speed Right Side Drive Twin Cam B-style transmission together with 1-1/2” belt on 300 width tires
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Dagger
Misc.
70
Frames
Curved Dagger
88B RIGID FRAMES FOR 300 OR 330 TIRES w/CHAIN
Frames
Swingarms
Fenders
Struts
Kit Included
Dagger
Part #
K19572
K19575
K19578
K19581
K19584
K19587
Style
88B Rigid
88B Rigid
88B Rigid
88B Rigid
88B Rigid
88B Rigid
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
Gas Tanks
Up Stretch Back BoneStr. Back Bone
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Kit Included
Curved Dagger
Part #
K19573
K19576
K19579
K19582
K19585
K19588
Style
88B Rigid
88B Rigid
88B Rigid
88B Rigid
88B Rigid
88B Rigid
Tire Width Tubing
300/330
300/330
300/330
300/330
300/330
300/330
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Rake
38º
38º
38º
40º
40º
40º
Exhaust
Up Stretch Back BoneStr. Back Bone
2"
5"
4"
6-1/2"
8"
8-1/2"
2"
5"
4"
6-1/2"
8"
8-1/2"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
1-3/4"
Misc.
Frames
71
Frames
FX-FL SWINGARM STYLE FRAMES / STOCK WIDTH
* Replacement style frames set-up to accept stock type swingarms (not included) see page 78
* These frames use removable trans plate designed for 4-speed transmissions
* Gas tank mounts for Softail style flatside tanks are welded in place
* Available in 1-1/4” and 1-3/8” (DOM) mandrel bent tubing
Swingarms
Fenders
Struts
Gas Tanks
1-1/4” TUBING
Oil Tanks
Part #
Style
K18001 FX/FL
K18002 FX/FL
Tire Width Tubing
Stock
Stock
RakeUp Stretch 1-1/4" 30º
1-1/4"
34º
0"
2"
Fwd
Controls
Kickstands
Handlebars
1-3/8” MEGA-TUBE
Exhaust
Part #
Misc.
Style
K19201 FX/FL
K19202 FX/FL
72
Frames
Tire Width Tubing
Stock
Stock
1-3/8"
34º
0"
2"
FX-FL SWINGARM STYLE FRAMES / 180-200 TIRE WIDTH
Frames
* Replacement style swingarm frames engineered for 180 width tires and using a 1-1/2” belt or 200 tires with chain
* These frames come complete with mirror-chromed swingarms & the required hardware
* The supplied fender struts accept 9” wide fenders and the gas tank mounts on frame accept Softail style flatside tanks
* Frames come with offset built in, will accept 4 or 5-speed Softail type transmissions with stock transmission bracket
* Available in 1-1/4” and massive 1-3/8” tubing
Swingarms
1-1/4” TUBING
Fenders
Struts
Gas Tanks
Kit Included
Oil Tanks
Sold Seperately
Part #
Style
Tire Width Tubing
180/200 1-1/4" 30º
180/200 1-1/4"
34º
K18003 FX/FL
K18004 FX/FL
0"
2"
Raw
Raw
Swingarm /Kit Assembly
Fwd
Controls
1-3/8” MEGA-TUBE
Kickstands
Handlebars
Kit Included
Exhaust
Sold Seperately
Part #
Style
K19203 FX/FL
K19204 FX/FL
Tire Width Tubing
180/200 1-3/8" 30º
180/200 1-3/8"
34º
0"
2"
Misc.
Raw Raw Swingarm /Kit Assembly
Frames
73
Frames
FXR-STYLE FRAMES / STOCK WIDTH
* These frames are made from 1-1/4” diameter tubing, mandrel bent (DOM)
* Frame backbone measures 1-3/4” in diameter
* Designed for 5-speed transmissions, FXR-style
* Use Big Twin forward controls with these frames
* Flatside fat bob gas tank mounts are welded in place
* Use stock Big Twin fork cups and FXE-style fender struts
* Available with 30º / 34º / 38º neck rakes
and front leg stretches of 0” and 2”
Swingarms
Fenders
Struts
Gas Tanks
Part #
Oil Tanks
Style
K17051 FXR
K17052 FXR
K17053
FXR
Tire Width Tubing
Stock
Stock
Stock
1-1/4"
34º
38º
1-1/4"
0"
2"
2"
FXR-STYLE FRAMES / 180 TIRE WIDTH
* Wide (180 tire) versions of our stock width FXR frames above, except these are supplied with our wide tire
swingarm kit, complete with raw rear fork, offset pivot blocks, wide axle, spacer, pulley spacer and related hardware
* These frames allow the builder to run a 180 tire with stock width rear belt or 200 tire with a chain
* Frames come complete with flatside gas tank mounts welded to each frame
* They are designed to accept Big Twin forward controls and the swingarms will accept stock FXR caliper brackets
* Use FXE style fender struts with these frames, as well as our K90109 polished stainless winged oil tank
* Each frame is crafted from the highest quality steel tubing, 1-1/4” diameter (1-3/4” backbone), mandrel bent and carefully
welded to meet our uncompromising standards
* Available with two neck rake angles, 34º and 38º. . .both with a front leg stretch of 2”
Fwd
Controls
Kickstands
Handlebars
Exhaust
Kit Included
Misc.
Part #
Style
K17057 FXR
K17058 FXR
74
Frames
Tire Width Tubing
180
180
1-1/4" 34º
1-1/4"
38º
2"
2"
Raw Swingarm Kit
Raw Swingarm Kit
300 WIDE TIRE KIT FOR 2000 & UP FRAMES
*
*
*
*
300 wide tire kit for 2000 & up frames
True bolt-on with only minimal cutting required
Swingarm is available in 3 billet steel axle carrier styles
Swingarm is 1-3/8" mandrel bent DOM steel tubing
*
*
*
*
Frames
13.5" one piece 14 gauge deep drawn strutless fender
Stainless steel splash guard for 88B 300 Right Side Drive rear section
Front belt guard and shorty rear belt guard both come in Raw or Chrome
1" Rear axle and axle kit w/polished stainless steel hidden axle cover
plates and hardware
Swingarms
Choose your Swingarm Style
Fenders
Struts
Gas Tanks
K20075
K20076
K20077
Swingarm
Swingarm
Swingarm
High-Torque Style
Dagger Style
Curved Dagger Style
Oil Tanks
Fwd
Controls
13-1/2" Strutless Round Top Fender
Stainless Steel Splash Guard
Kickstands
300
Tire kiT
Handlebars
wide
Raw or Chrome
Shorty Rear Belt Guard
Raw or Chrome
Front Belt Guard
Exhaust
Rear Axle Kit
Misc.
NOTE: Requires Right Side Drive Transmission or Right Side Drive
Conversion Of Stock Transmission. This Kit Requires Relocation Of Tail Light
& License Plate Bracket And Wiring.
Swingarms
77
Frames
SWINGARMS FOR SOFTAIL MODELS 1987-1999 / STOCK WIDTH
Swingarms
* These assemblies are sold as a replacements for OEM 47537-89A Softail rear section
* They differ only in the shape of the downtube . . .the swingarm on the left has the same tube configuration as stock,
whereas the rear section on the right is all tubular, better matching the frame rails
* They accept all stock components
Fenders
Struts
Gas Tanks
Oil Tanks
K20009
Fwd
Controls
REPLACEMENT SWINGARM ASSEMBLY FOR SOFTAILS
1987-1999 . . . REPLACES OEM 47537-89A
K20023
CUSTOM ROUND TUBE SWINGARM FOR SOFTAILS
1987-1999 . . . REPLACES OEM 47537-89A
SWINGARM FOR EVOLUTION SPORTSTERS 1988-UP
Kickstands
* A beautifully-crafted assembly, brilliantly polished & plated to replace the stock one
* Accepts all factory components
* Replaces OEM 47547-87
Handlebars
Exhaust
Misc.
K20006
78
SWINGARM ASSEMBLY FOR EVOLUTION SPORTSTERS 1988-UP . . . CHROME
Swingarms
SWINGARMS FOR BIG TWIN 4-SPEED MODELS / 1973-1983
Frames
ADJUSTABLE STYLE / CHAIN DRIVE
* Features bolt-on shock anchor plates which, when moved, result in raising (up to 5/8”) or lowering (up to 1- 5/8”) the bike
* Fits chain drive models * Includes bearings
* Sold raw, ready for prep & paint or with a brilliant chrome finish
Swingarms
K20001 ADJUSTABLE SWINGARM/4-SPD CHAIN DRIVE
K20007
CHROME
ADJUSTABLE SWINGARM/4-SPD CHAIN DRIVE
RAW
Fenders
Struts
Gas Tanks
REPLACEMENT STYLE / CHAIN DRIVE
* This assembly replaces the stock factory unit as delivered on 1973-1983 Big Twin 4-speeds with rear chain
* Shock anchors are welded in place, as are chain guard tab and brake anchor * Includes bearings
* Offered in chrome finish or raw steel * Replaces OEM 47500-73
Oil Tanks
K20003 REPLACEMENT STYLE SWINGARM/4-SPD CHAIN DRIVE
Fwd
Controls
CHROME
K20011 REPLACEMENT STYLE SWINGARM/4-SPD CHAIN DRIVE
RAW
Kickstands
REPLACEMENT STYLE / BELT DRIVE
* Wider version of the replacement style assembly to accomodate the extra width when running a rear belt set-up, as on 1980-1983 models
* Bearings included
* Replaces OEM 47466-79
* Offered in show chrome finish or raw, ready for paint and prep
Handlebars
K20004 SWINGARM FOR 4-SPEED REAR BELT MODELS
Exhaust
CHROME
K20008
SWINGARM FOR 4-SPEED REAR BELT MODELS
RAW
Misc.
Swingarms
79
ROUND TOP FRONT FENDERS / FOR 21” WHEELS
Frames
* These heavy duty 14 gauge steel fenders are the ideal match for today’s 21” tires
* They are manufactured by a deep-draw process, resulting in a single cohesive structure that’s molecularly sound
and able to take the abuse of the hard-riding American biker
Swingarms
Fenders
Struts
Gas Tanks
SHORT FRONT FENDERS
Oil Tanks
K40080 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 4.75” WIDE / UN-DRILLED
K40081 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 4.75” WIDE / DRILLED (SHOWN)
K40088 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 5.50” WIDE / UN-DRILLED
K40089 FENDER/FRONT/SHORT . . . FOR 21” WHEELS / 5.50” WIDE / DRILLED (SHOWN)
Fwd
Controls
Kickstands
Handlebars
LONG FRONT FENDERS
K40090
K40083
K40091
Exhaust
FENDER/FRONT/LONG / FOR 21” WHEELS / 4.25” WIDE (STRETCHED)
FENDER/FRONT/LONG / FOR 21” WHEELS / 4.75” WIDE (TRIMMED)
FENDER/FRONT/LONG / FOR 21” WHEELS / 5.50” WIDE (STRETCHED)
Misc.
Fenders / Struts
81
Frames
ROUND TOP FRONT FENDERS / FOR 21” WHEELS
Swingarms
* These heavy duty 14 gauge steel fenders are the ideal match for today’s 21” tires
* They are manufactured by a deep-draw process, resulting in a single cohesive structure that’s molecularly sound
and able to take the abuse of the hard-riding American biker
Fenders
Struts
Gas Tanks
Oil Tanks
BLANK FRONT FENDERS
K40092
K40082
K40093
Fwd
Controls
FENDER/FRONT/BLANK . . . FOR 21” WHEELS/ 4.25” WIDE / UN-TRIMMED
FENDER/FRONT/BLANK . . . FOR 21” WHEELS / 4.75” WIDE / UN-TRIMMED
FENDER/FRONT/BLANK . . . FOR 21” WHEELS / 5.50” WIDE / UN-TRIMMED
Kickstands
Handlebars
Exhaust
STRETCHED FRONT FENDER
w/SQUARE-CUT BOTTOM
K40094
K40084
K40095
Misc.
82
FENDER/FRONT/STRETCHED . . . FOR 21” WHEELS 4.25” WIDE / SQUARE CUT-BOTTOM
Fenders / Struts
Frames
ROUND TOP FRONT FENDERS FOR 21” WHEELS
Swingarms
Fenders
Struts
Gas Tanks
CUSTOM CLAW FRONT FENDER
K40086
K40087
FENDER/FRONT/CUSTOM CLAW
FOR 21” WHEELS / 4.25” WIDE
FENDER/FRONT/CUSTOM CLAW
FOR 21” WHEELS / 5.50” WIDE
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
K40081
Exhaust
K40083
Misc.
Fenders / Struts
83
Frames
FENDERS / STRUTLESS FOR 180 & 230/240 SOFTAIL-STYLE FRAMES
* These self-supporting 14 gauge steel beauties are, without a doubt, the cure-all for every custom builder
* Fender mounting is fast...prep for painting is minimal
* Fenders feature welded-in dual wiring tubes and built-in electrical boxes
* Available in 9” & 11” wide versions for Softail-style Evolution frames as well as Softail-style Twin Cam 88B frames
Swingarms
Fenders
Struts
FOR EVO SOFTAIL-STYLE FRAMES
Gas Tanks
K40040
K40041
FENDER/STRUTLESS/ROUND TOP . . . 9” WIDE FOR 180 TIRE SOFTAIL STYLE FRAMES
FENDER/STRUTLESS/ROUND TOP . . . 11” WIDE FOR 230/240 TIRE SOFTAIL STYLE FRAMES
Oil Tanks
Fwd
Controls
FOR TWIN CAM 88B STYLE FRAMES
Kickstands
K40044
K40043
FENDER/STRUTLESS/ROUND TOP . . . 9” WIDE FOR 180 TIRE SOFTAIL STYLE TC-88B FRAMES
FENDER/STRUTLESS/ROUND TOP . . . 11” WIDE FOR 230/240 TIRE SOFTAIL STYLE TC-88B FRAMES
FAT BOB FENDER
Handlebars
FOR SOFTAIL MODELS 1984 TO PRESENT
AND CUSTOM APPLICATIONS
This steel rear fender was designed not to split, it’s made
from one piece in 0.060" (16 gauge) steel which has been
phosphate etched to help prevent corrosion and to give a
good base for primers to adhere. The fender is 9" wide, has a
more rounded profile across the top to match with today's lower
profile tires, a rolled edge along the sides to give more stylish look
and an ignition module mounting position already set in. Will
accommodate big wheel conversions with tires up to 200 wide.
Exhaust
Misc.
K40079
84
FENDER . . . 9” WIDE FOR SOFTAIL MODELS 1984 TO PRESENT AND CUSTOM APPLICATIONS
Fenders / Struts
WIDE ROUND TOP STRUTLESS FENDERS FOR 280, 300 & 330 WIDTH TIRES
FOR 280, 300 & 330 TIRE SOFTAIL-STYLE FRAMES
Frames
* These self supporting 14 guage steel beauties are, without a doubt, the cure-all for every custom builder
* Fender mounting is fast. . .prep for painting is minimal
* Fenders feature welded-in dual wiring tubes and built-in electrical boxes
Swingarms
Fenders
Struts
Gas Tanks
FOR EVO SOFTAIL-STYLE FRAMES
K40100
12-1/2” Wide Round Top Strutless Fender for 280 Tire Evo Style frames
K40102
13-1/2" Wide Round Top Strutless Fender for 300 Tire Evo Style frames
K40104
14-1/4" Wide Round Top Strutless Fender for 330 Tire Evo Style frames
Oil Tanks
FOR TWIN CAM 88B STYLE FRAMES
K40101
12-1/2” Wide Round Top Strutless Fender for 280 Tire TC 88B Style frames
K40103
13-1/2” Wide Round Top Strutless Fender for 300 Tire TC 88B Style frames
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
Fenders / Struts
85
Frames
FENDERS w/EXTERNALLY WELDED STRUTS
FOR 180/200 & 230/240/250 SOFTAIL-STYLE FRAMES
* Heavy duty 14 gauge steel fenders featuring externally welded struts, providing substantial
strength with clean, flowing lines
* These one-piece, round top fenders eliminate the need for drilling and time consuming fitment
of the fender to the frame
* 9” and 11” wide versions available
* Mounting hardware is included
Swingarms
Fenders
Struts
K40037 FENDER . . . EXTERNALLY WELDED STRUTS / 9” WIDE
FOR 180/200 TIRE SOFTAIL-STYLE FRAMES
Gas Tanks
Oil Tanks
Fwd
Controls
K40038
FENDER . . . EXTERNALLY WELDED STRUTS / 11” WIDE
FOR 230/240/250 SOFTAIL-STYLE FRAMES
K40039
FENDER . . . EXTERNALLY WELDED STRUTS / 9” WIDE
FOR 180/200 TIRE TC 88B SOFTAIL-STYLE FRAMES
Kickstands
Handlebars
Exhaust
Misc.
86
Fenders / Struts
ROUND TOP REAR FENDERS FOR WIDE TIRE SOFTAIL-STYLE FRAMES
Frames
* These top quality fenders have been manufactured from thick 14 gauge steel using a deep-draw
process that delivers a single, strong one-piece fender. . .you won’t find any welded-together
fenders here.
* Each of the trimmed models have been engineered to follow the radius of today’s lower profile tires
resulting in the most effective coverage without sacrificing design harmony
* Available in trimmed versions, with additional reinforcement at the fender tip or full, un-trimmed
versions for your custom design applications
* Choose from fender widths of 9” (for 180/200 tires & frames), 11” (for 230/240/250 tires & frames),
12-1/2” (for 280 tire & frame) and 13-1/2” (for 300 tire & frame)
Swingarms
Fenders
Struts
9” & 11” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
Gas Tanks
Oil Tanks
Fwd
Controls
K40050
K40052
FENDER/REAR/ROUND TOP . . . 9” WIDE FOR SOFTAILS / UN-TRIMMED MODEL
FENDER/REAR/ROUND TOP . . . 11” WIDE FOR SOFTAILS / UN-TRIMMED MODEL
Kickstands
Handlebars
Exhaust
K40051 FENDER/REAR/ROUND TOP . . . 9” WIDE FOR SOFTAILS / TRIMMED MODEL
K40053 FENDER/REAR/ROUND TOP . . . 11” WIDE FOR SOFTAILS / TRIMMED MODEL
Misc.
Fenders / Struts
87
Frames
12-1/2” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
Swingarms
Fenders
Struts
Gas Tanks
K40060 FENDER/REAR/ROUND TOP . . . 12-1/2” WIDE
FOR SOFTAILS UN-TRIMMED MODEL
Oil Tanks
Fwd
Controls
K40061 FENDER/REAR/ROUND TOP . . . 12-1/2” WIDE
FOR SOFTAILS TRIMMED MODEL
13-1/2” WIDE ROUND TOP FENDERS FOR SOFTAIL-STYLE FRAMES
Kickstands
Handlebars
Exhaust
K40064
FENDER/REAR/ROUND TOP . . . 13-1/2” WIDE
FOR SOFTAILS UN-TRIMMED MODEL
Misc.
88
Fenders / Struts
K40065
FENDER/REAR/ROUND TOP . . . 13-1/2” WIDE
FOR SOFTAILS TRIMMED MODEL
Frames
ROUND TOP REAR FENDERS FOR RIGID FRAMES
* Wide & stylish rigid frame fenders offered in five widths . . . 9”, 11”, 12-1/2”, 13-1/2” and 14-1/4" wide
* These round top fenders are made from thick 14 gauge steel, deep-drawn, resulting in a single formed shape
* Yes, thick, wide one-piece fenders. . .these are not your ordinary welded down-the-middle fenders,
destined to break over time
* All of these fenders feature a reinforced tip area for taillight and/or license plate mounting
* Available in full un-trimmed versions or ready-to-mount trimmed models
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
9” & 11” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
Handlebars
K40054
FENDER/REAR/ROUND TOP / 9” WIDE
FOR RIGID FRAMES / UN-TRIMMED MODEL
K40055 FENDER/REAR/ROUND TOP / 9” WIDE
K40056
FOR RIGID FRAMES / UN-TRIMMED MODEL
K40057
FOR RIGID FRAMES / TRIMMED MODEL
FEATURES LEFT SIDE CUTAWAY
FOR RIGID FRAMES / TRIMMED MODEL
Exhaust
K40096 FENDER/REAR/ROUND TOP / 9” WIDE FOR RIGID FRAMES / TRIMMED / NO BELT CUT OUT
Misc.
Fenders / Struts
89
Frames
Swingarms
12-1/2” & 13-1/2” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
Fenders
Struts
K40058
FENDER/REAR/ROUND TOP / 12-1/2” WIDE
FOR RIGID FRAMES w/280 TIRE / UN-TRIMMED
K40059 FENDER/REAR/ROUND TOP / 12-1/2” WIDE
K40066
FOR RIGID FRAMES w/300 TIRE / UN-TRIMMED
K40067
FOR RIGID FRAMES w/280 TIRE / TRIMMED
12-1/2” & 13-1/2” WIDE ROUND TOP FENDERS FOR RIGID FRAMES RIGHT SIDE CUTAWAY
Gas Tanks
FEATURES RIGHT SIDE CUTAWAY
FEATURES RIGHT SIDE CUTAWAY
Oil Tanks
14-1/4” WIDE ROUND TOP FENDERS FOR RIGID FRAMES
K40110
K40111
K40112
Fwd
Controls
14-1/4” CUSTOM Round Top RIGID REAR Fender for LOWER PROFILE TIRES - UNTRIMMED
14-1/4” CUSTOM Round Top RIGID REAR Fender for LOWER PROFILE TIRES - TRIMMED / NO CHAIN CUT
14-1/4” CUSTOM Round Top RIGID REAR Fender for LOWER PROFILE TIRES - RIGHT SIDE CHAIN CUT
Kickstands
Handlebars
Exhaust
TRIMMED / NO CHAIN CUT
Misc.
90
Fenders / Struts
RIGHT SIDE CHAIN CUT
Frames
RIGHT OR LEFT SIDE DRIVE MODELS
The round top 1-piece wonder, 11” wide for fitment on 230-240-250 tire, 12-1/2” wide for fitment
on 280 tire and 13-1/2” wide for fitment on 300 tire width frames . . . right or left side drive models.
This fender is trimmed to fit the tire radius and features no cutaway for belt or chain
(requires trimming on drive side)
K40063
Swingarms
FOR RIGID FRAMES w/230-240-250 TIRE
TRIMMED MODEL / WITHOUT CUTAWAY
Fenders
Struts
FOR RIGID FRAMES w/280 TIRE
FENDER BRACE
K40068
FOR RIGID FRAMES w/300 TIRE
K30008
FENDER BRACE/ FITS OUR 180 RIGID FRAMES
3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT
THE 9” WIDE ROUND TOP FENDERS
K30009
FENDER BRACE/ FITS OUR 230-240-250 RIGID
FRAMES / 1-1/2" AXLE CARRIER / USE THIS BRACE TO
MOUNT THE 11” WIDE ROUND TOP FENDERS
FOR RIGID ROUND TOP FENDERS
Here’s our one-piece, deep-drawn 12-1/2” round top
fender shown with mounting brace. The brace is
fabricated from 1/4” thick steel, then styled to
enhance the lines of frame, fender and that big, bad
wheel & tire.
K30010
1-1/2" AXLE CARRIER / USE THIS BRACE TO MOUNT
THE 12-1/2” WIDE ROUND TOP FENDERS
K30011
1-1/2" AXLE CARRIER / USE THIS BRACE TO MOUNT
THE 13-1/2” WIDE ROUND TOP FENDERS
K30012
3/8" AXLE CARRIER / USE THIS BRACE TO
K30013
FENDER BRACE/ FITS OUR 230-240-250 RIGID
FRAMES / 3/8" AXLE CARRIER / USE THIS BRACE
TO MOUNT THE 11” WIDE ROUND TOP FENDERS
K30014
1-3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 9” WIDE ROUND TOP FENDERS
K30015
1-3/8" AXLE CARRIER / USE THIS BRACE TO
K30016
FENDER BRACE/ FITS OUR 230-240-250 RIGID FRAMES
1-3/8" AXLE CARRIER / USE THIS BRACE TO MOUNT THE 11” WIDE ROUND TOP FENDERS
Requires welding
Fenders / Struts
Gas Tanks
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
91
Frames
FENDER & STRUT KITS FOR SOFTAIL-STYLE FRAMES
* All in one kits featuring our heavy duty chromed (or raw) steel struts contoured to match the radius of our sturdy flat fenders
* Struts feature internal mounting resulting in that clean custom look
* Support braces and hardware included
* Kits are available with 8-1/2” and 9” fenders
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K40033
K40034
K40035
FENDER & STRUT KIT . . . 8-1/2” WIDE FLAT FENDER w/RAW STRUTS / FOR SOFTAIL STYLE FRAMES
FENDER & STRUT KIT . . . 9” WIDE FLAT FENDER w/CHROME STRUTS / FOR SOFTAIL STYLE FRAMES
FENDER & STRUT KIT . . . 9” WIDE FLAT FENDER w/RAW STRUTS / FOR SOFTAIL STYLE FRAMES
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
* Fender shown not the same as supplied in kits sold above
92
Fenders / Struts
SKIRTED FENDERS
Frames
* All steel construction / 14 Gauge
* 48” long / available in widths of 7-1/2”, 8-1/2” and 9”
Swingarms
RADIUS-CUT SIDES
K40007 SKIRTED FENDER . . . 7-1/2” WIDE
K40008 SKIRTED FENDER . . . 8-1/2” WIDE
K40009 SKIRTED FENDER . . . 9” WIDE
Fenders
Struts
Gas Tanks
Oil Tanks
ANGLE-CUT SIDES
Fwd
Controls
Kickstands
Handlebars
CURVED SIDES
Exhaust
Misc.
Fenders / Struts
93
Frames
FLAT FENDERS
* Top quality 14 gauge steel construction
* Each of these fenders measures 48” in length
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K40001 6” WIDE | K40002 7-1/2” WIDE | K40003 8-1/2” WIDE | K40004
Fwd
Controls
9” WIDE
FENDER BRACES
* Crafted specifically for rigid frame applications, these 1/4” thick chrome steel braces are available for
7-1/2”, 8-1/2”, 9” flat fenders
* Braces are 1” wide and measure 12-1/2” from frame mount holes to fender mount holes
Kickstands
Handlebars
Exhaust
K30002 FOR 7-1/2” FENDERS
Misc.
94
Fenders / Struts
K30003 FOR 8-1/2” FENDERS
K30004
FOR 9” FENDERS
SISSY BARS FOR RIGID FRAMES
Frames
These chrome steel sissy bars are manufactured
from 5/8”round material. Both bars are designed
to mate with flat fenders measuring 9” wide.
Swingarms
Available in two distinct styles. . . tilt-back and straight.
Tilt-back model measures 32” in height. Height above brace
is 19”. Width (inside-to-inside) at the bottom is 11-1/2” .
Fenders
Struts
Straight model measures 30-1/2” in height. Height
above brace is 17-1/4”, Width (inside-to-inside)
at the bottom mounts is 11-1/2”.
Gas Tanks
K30006
K30007
SISSY BAR / TILT-BACK STYLE
SISSY BAR / STRAIGHT STYLE
Oil Tanks
Fwd
Controls
FENDER BRACES
* Designed to provide the necessary fender support on rigid frames, these braces are formed from 1/4” thick x 1” wide steel,
then finished in bright chrome
* Available for 5” & 6” flat fenders as well as a model for 7” wide fat bob fenders
Kickstands
Handlebars
Exhaust
K30005
FENDER BRACE / 5” & 6” FLAT FENDERS
K30001
Misc.
FENDER BRACE / 7” FAT BOB FENDERS
Braces
95
Frames
FENDER STRUTS / SOFTAIL-STYLE
* Softail-style strut sets featuring internal mounting holes for the clean custom look
* Designed for Softail-style frames, as well as our frames
* Crafted from 1/2” thick steel, these curved or straight struts are available for fitment to 7-1/2”, 8-1/2”, and 9” wide fenders
* Mounting hardware (to frame) is included
* Finished in bright chrome or raw, ready for prep and paint
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
CURVED STRUT SETS
K50007 FOR 7-1/2” FENDERS . . . CHROME
K50005 FOR 8-1/2” FENDERS . . . CHROME
K50001 FOR 9” WIDE FENDERS . . . CHROME
Fwd
Controls
K50013 FOR 8-1/2” FENDERS . . . RAW
K50003 FOR 9” WIDE FENDERS . . . RAW
Kickstands
Handlebars
Exhaust
STRAIGHT STRUT SETS
K50014 FOR 8-1/2” WIDE FENDERS . . . CHROME
K50004 FOR 8-1/2” WIDE FENDERS . . . RAW
K50009 FOR 9” WIDE FENDERS . . . CHROME
Misc.
96
Fenders / Struts
STRUT SETS
FENDER STRUTS / SOFTAIL-STYLE / CNC-RADIUSED
Frames
* CNC-radiused steel fender struts designed for Softail-style frames, including our frames
* Available for fitment to 7-1/2”, 8-1/2”, 9” , 11”, 12-1/2" and 13-1/2" wide fenders
* Mounting bolts (to the frame) included * Lustrous chrome or raw finish
* Offered in solid or slotted window design
SOLID CONTOUR STRUT SETS
Swingarms
FOR 13-1/2” WIDE FENDERS
K50035 - RAW
K50032 - RAW
SOLID CONTOUR FOR
1-1/2" TUBING FRAMES
Fenders
Struts
FOR 11” WIDE FENDERS
K50039 - RAW
SOLID CONTOUR STRUT SETS
K50028 - RAW
K50029 - CHROME
Gas Tanks
K50024 - RAW
K50025 - CHROME
K50020 - RAW
K50021 - CHROME
Oil Tanks
SOLID CONTOUR
K50016 - RAW
K50017 - CHROME
Fwd
Controls
SLOTTED CONTOUR STRUT SETS
K50030 - RAW
K50031 - CHROME
K50026 - RAW
K50027 - CHROME
SLOTTED CONTOUR
Kickstands
K50022 - RAW
K50023 - CHROME
Handlebars
K50018 - RAW
K50019 - CHROME
Exhaust
Misc.
Fenders / Struts
97
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
96
Gas Tanks
ONE PIECE STRETCHED CUSTOM GAS TANKS
Frames
Our commitment to quality and craftmanship are evident in our new 14 gauge deep drawn gas tanks
with our exclusive grommet mounting system.
* Incorporated joggle lap joints throughout.
* Joggle lap joints allow the tunnel plate to be sunken below the bottom surface of the
Swingarms
tank making grinding of the welds unnecessary. * Tank is mounted to the frame using the supplied weld on brackets. When the brackets have been installed they mount
to the gas tank using our new, exclusive design, recessed grommet mounting system which isolates it from vibration and gives a nice flush look.
* Grey phosphate etched finish to help prevent corrosion and to give a good surface for primer to adhere.
Fenders
Struts
* Comes with weld to frame brackets, grommets and mounting hardware, stainless filler bung, stainless 13/16”(22mm) petcock outlet,
stainless breather tube and stainless rear mounted gas crossovers tapped for 1/8”-NPT unions
* 14 gauge deep drawn for superior fit and finish
Gas Tanks
Oil Tanks
New Grommets
Fwd
Controls
Each of these custom stretched gas tanks
include our new grommet mounting system
O u r Gro mmets
Kickstands
2 bung types to choose from
Screw-In Type
Po p - Up Typ e
Handlebars
OR
Exhaust
Gas caps sold separately
Caps pictured are for reference only
-Go to pg.105 to view our gas caps All gas tanks must be pressure tested, cleaned with tank cleaner and sealed before painting to protect the
final finish and prevent internal rusting during winter storage. Always install the gas tank before painting
to check fork, triple tree and handlebar control clearances.
Gas Tanks
Misc.
99
Frames
ONE PIECE CUSTOM GAS TANKs
SCREW-IN TYPE GAS CAP BUNG
Swingarms
Fenders
Struts
Gas Tanks
K91016
Stretched Custom Gas Tank
Fits custom applications, uses
screw in gas cap (not included).
Holds approximately 4 gallons.
Oil Tanks
Overall length:
22.24”
Tunnel length:
19.21”
Seat pocket length: 3.03”
Tunnel width:
3.48”
Overall width:
14.00”
Height:
9.3”
Fwd
Controls
POP-UP STYLE GAS CAP BUNG
Kickstands
Handlebars
Exhaust
K91017
pop-up style gas cap
(not included).
Misc.
100
Gas Tanks
Overall length:
22.24”
Tunnel length:
19.21”
Tunnel width:
3.48”
Overall width:
14.00”
Height:
9.3”
Frames
Swingarms
Fenders
Struts
K91019
Gas Tanks
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
23.25”
23.25”
2.00”
13.50”
8.86”
Oil Tanks
ONE PIECE CUSTOM GAS TANKS
Fwd
Controls
Kickstands
Handlebars
K91020
(not included).
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
23.25”
23.25”
2.00”
13.50”
8.86”
Exhaust
Misc.
Gas Tanks
101
Frames
Swingarms
Fenders
Struts
Gas Tanks
K91032
Oil Tanks
Overall length:
23.28”
Tunnel length:
19.70”
Tunnel width:
2.00”
Overall width:
16.18”
Height:
8.19”
Fwd
Controls
Kickstands
Handlebars
Exhaust
K91033
(not included).
Misc.
102
Gas Tanks
Overall length:
23.28”
Tunnel length:
19.70”
Tunnel width:
2.00”
Overall width:
16.18”
Height:
8.19”
Frames
Swingarms
Fenders
Struts
Gas Tanks
K91024
One Piece Custom Gas Tank
Holds approximately 3.5 gallons.
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
21.25”
21.25”
3.25”
14.00”
9.00”
Oil Tanks
Fwd
Controls
Kickstands
Handlebars
K91025
(not included).
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
Exhaust
21.25”
21.25”
3.25”
14.00”
9.00”
Misc.
Gas Tanks
103
Frames
Swingarms
Fenders
Struts
Gas Tanks
K91027
Fits Sportster models from 2004
to present, uses screw in gas cap
(not included).
Oil Tanks
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
23.75”
21.25”
3.25”
14.00”
9.00”
Fwd
Controls
Kickstands
Handlebars
K91029
Exhaust
Fits Sportster models from 2004
to present, uses pop-up style gas cap
(not included).
Misc.
104
Gas Tanks
Overall length:
Tunnel length:
Tunnel width:
Overall width:
Height:
23.75”
21.25”
3.25”
14.00”
9.00”
Custom Gas tank Gas Caps
Stock Style Screw in Gas Cap
w/Pop Up Look
Frames
Raw Pop Up Custom Gas Cap
Chrome Pop Up Custom Gas Cap
Swingarms
Fenders
Struts
Gas Tanks
K14047
K14048
K14050
Fits as a replacement for stock
screw in type cap.
Fits custom applications.
Raw paintable pop up type cap.
Fits custom applications.
Chrome pop up type cap.
Oil Tanks
Fwd
Controls
Kickstands
Screw In Type
Pop Up Type
Pop Up Type
Handlebars
Exhaust
Misc.
Gas Tanks
105
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
104
Oil Tanks
OIL TANKS FOR SOFTAIL-STYLE & RIGID FRAMES
Frames
CUSTOM HORSESHOE-STYLE
* These tanks fit stock 1986-1999 Softails, custom and all wide tire Softail and rigid frames
* 3 Quart capacity
* They feature a re-routed return line, away from the feed line, providing better circulation and cooling
* Each of these tanks accept Softail-style batteries
* See page 139 for installation brackets
Swingarms
Oil Tank Caps Not Included
Fenders
Struts
Gas Tanks
Oil Tanks
K90005
OIL TANK/CUSTOM HORSESHOE
3 QUART SIDE FILL . . . CHROME
K90006 OIL TANK/CUSTOM HORSESHOE
3 QUART SIDE FILL . . . RAW
Fwd
Controls
All of these tanks will fit width frames. . . from stock up to 250 tire width
Kickstands
Handlebars
Exhaust
K90011
OIL TANK/CUSTOM HORSESHOE
3 QUART CENTER FILL . . . CHROME
K90019 OIL TANK/CUSTOM HORSESHOE
Misc.
3 QUART CENTER FILL . . . RAW
Oil Tanks
107
WINGED OIL TANKS FOR SOFTAIL-STYLE & RIGID FRAMES
Frames
* These tanks all feature gap-concealing wings
* Available for 1986-1999 stock width and wide tire Softail-style frames as well as Rigid frames
* 3 Quart capacity, side or center fill
* Accepts Softail-style batteries
* Better circulation and cooling provided by dumping return oil to the far side of the tank
* Available with nipple outlets or threaded (1/8” pipe) holes
Swingarms
FOR STOCK WIDTH FRAMES
Fenders
Struts
Gas Tanks
K90014
WINGED OIL TANK / 3 QT SIDE FILL / CHROME
K90033
WINGED OIL TANK / 3 QT SIDE FILL / CHROME
w/THREADED OIL LINE HOLES
K90076
WINGED OIL TANK / 3 QT CENTER FILL / RAW
K90032
WINGED OIL TANK / 3 QT CENTER FILL / CHROME
w/THREADED OIL LINE HOLES
Oil Tanks
Fwd
Controls
Kickstands
FOR FRAMES DESIGNED FOR 180/200/230/240/250 TIRES
Handlebars
Exhaust
Misc.
K90034
K90023
108
WINGED OIL TANK / 180/200/230-250 TIRE FRAMES
3 QT SIDE FILL / CHROME
WINGED OIL TANK / 180/200/230/240/250 TIRE FRAMES
3 QT SIDE FILL / RAW
Oil Tanks
K90031
WINGED OIL TANK / 180/200/230-250 TIRE FRAMES
3 QT SIDE FILL / w/THREADED OIL LINE HOLES
CHROME
OIL TANKS FOR SOFTAIL-STYLE AND RIGID WIDE TIRE FRAMES
CUSTOM HORSESHOE- STYLE FOR 300 TIRE FRAMES
* Available for our Softail-style and Rigid
280/300 width tire frames
* 3 quart capacity, center fill
* Accepts Softail-Style batteries
* Better circulation and cooling provided by
dumping return oil to the far side of the tank
Frames
* NPT threaded (1/8” pipe) fittings
* Top mounted using our new exclusive grommet mounting
system for a clean custom look
* Installation grommets available with purchase
Swingarms
THREADED
Fenders
Struts
Gas Tanks
K90077
Standard
K90077
K90078
K90079
K90082
K90082
Custom Fit
Oil Tanks
Oil tank / winged horseshoe 3qt. center fill / raw for Softail-style and rigid 300-330 tire RSD frames
Oil tank / winged horseshoe 3qt. center fill / chrome for Softail-style and rigid 300-330 tire RSD frames
Oil tank / winged horseshoe 3qt. center fill / raw for Softail-style and rigid 240-250 tire RSD frames
Custom Oil tank / winged horseshoe 3qt. center fill / raw threaded for Softail-style frames 300-330 tire RSD
Fwd
Controls
OIL TANKS FOR RIGID 88B WIDE TIRE FRAMES
CUSTOM HORSESHOE- STYLE FOR 300 FRAMES
* Available for our Rigid 88B 300 width tire frames
* 3 quart capacity, center fill
* Includes battery box
* Better circulation and cooling provided by dumping return oil to the far side of the tank
* NPT threaded (1/8” pipe) fittings
* Installation grommets available with purchase
Kickstands
Handlebars
Exhaust
Misc.
K90080 Oil tank / winged horseshoe 3qt. center fill / raw for 88B Rigid 300 tire frames
Oil Tanks
109
Frames
WINGED OIL TANK FOR FXR MODELS
Swingarms
Fenders
Struts
* Hand crafted from stainless steel, then polished to a mirror finish, these tanks are designed for stock
FXR frames as well as our replacement style and wide tire (180/200) versions
* Winged design blends perfectly with frame rails, resulting in a pleasing transition to the rear of the bike
* It has a welded-in-place battery plate which accepts stock FXR-size batteries
* Tank features a re-routed return line, away from the feed line, providing better circulation & cooling
* 4 Quart capacity
* Side fill
Gas Tanks
Oil Tanks
Fwd
Controls
K90109 OIL TANK/WINGED HORSESHOE . . . POLISHED STAINLESS / 4 QT SIDE FILL / FOR STOCK & 180/200 FXR-STYLE FRAMES
Kickstands
Handlebars
Exhaust
Misc.
110
Oil Tanks
OIL TANKS FOR BIG TWIN 4-SPEED MODELS
* Custom horseshoe-style featuring built-in battery boxes
* Accepts Softail-style or FXE batteries
* 3-1/2 Quart capacity
* Tanks feature a re-routed return line, away from the feed , resulting in improved circulation & cooling
* Fit 4-speed FX/FXE/FL models on 1965-1983 swingarm frame
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K90001 OIL TANK/CUSTOM HORSESHOE . . . CHROME / 3-1/2 QT
SIDE FILL / FITS 1965-83 FX/FXE/FL w/SWINGARM FRAME
ACCEPTS ELECTRIC START SOFTAIL or FXE BATTERIES
K90012 OIL TANK/CUSTOM HORSESHOE w/SPIN-ON FILTER . . . CHROME
3-1/2 QT SIDE FILL / FITS 1965-83 FX/FXE/FL w/SWINGARM
FRAME / ACCEPTS ELECTRIC START SOFTAIL or FXE BATTERIES
Fwd
Controls
K90025 OIL TANK/CUSTOM HORSESHOE w/SPIN-ON FILTER . . . RAW
3-1/2 QT SIDE FILL / FITS 1965-83 FX/FXE/FL w/SWINGARM
FRAME / ACCEPTS ELECTRIC START SOFTAIL or FXE BATTERIES
Kickstands
Handlebars
Exhaust
K90020 OIL TANK/HORSESHOE . . . CHROME/4 QT SIDE FILL
FOR RIGID or EARLY SWINGARM (1958-64) FRAMES
ACCEPTS ELECTRIC START FXE BATTERIES
K90016 OIL TANK/HORSESHOE w/SPIN-ON FILTER . . . CHROME
4 QT SIDE FILL FOR RIGID/EARLY (58-64) SWINGARMS
Misc.
K90026 OIL TANK/HORSESHOE w/SPIN-ON FILTER . . . RAW
4 QT SIDE FILL FOR RIGID/EARLY (58-64) SWINGARMS
Oil Tanks
111
Frames
ROUND OIL TANKS w/BUILT-IN BATTERY BOXES
FOR SOFTAIL-STYLE WIDE TIRE FRAMES. . . 200/230/240/250 MODELS
Swingarms
* Custom deep drawn tanks hand-crafted from 16 gauge steel featuring integral battery boxes sized for Softail-style batteries
* Available in a mirror-chrome finish or raw, ready for prep & paint
* Capacity is 3-1/2 quarts * Tanks measure 6-1/2” in diameter x 11-3/4” in width * Oil line holes are 1/8” pipe
* All tanks feature gap-concealing wings designed specifically for wide tire 200/230/240/250 model frames
* Front bracket included (requires purchase of K13006 rear mounting bracket) see page 139
Fenders
Struts
Gas Tanks
K13006 Rear Bracket
Sold Separately
Oil Tanks
K90049
K90050
K90051
K90052
Fwd
Controls
ROUND OIL TANK w/BATTERY BOX . . . CHROME / 3-1/2 QT SIDE FILL / WIDE TIRE FRAMES / LEFT WING IS SHORTER
ROUND OIL TANK w/BATTERY BOX . . . RAW / 3-1/2 QT SIDE FILL / WIDE TIRE FRAMES / LEFT WING IS SHORTER
ROUND OIL TANK w/BATTERY BOX . . . CHROME / 3-1/2 QT CENTER FILL / WIDE TIRE FRAMES / LEFT WING IS SHORTER
ROUND OIL TANK w/BATTERY BOX . . . RAW / 3-1/2 QT CENTER FILL / WIDE TIRE FRAMES / LEFT WING IS SHORTER
Kickstands
Handlebars
Exhaust
Misc.
112
Oil Tanks
ROUND OIL TANKS w/BUILT-IN BATTERY BOXES
FOR STOCK & 180 WIDTH SOFTAIL-STYLE FRAMES & ALL RIGID FRAMES
Frames
* The same high quality steel tanks as on the preceding page, except these beauties are designed for stock width Softail style frames,
as well as any rigid frames. . . you’ll note that these tanks have equal length, gap-concealing wings
* Choose from side or center fill, chrome or raw steel * 3-1/2 Quart capacity * Tanks are 6-1/2” in diameter x 11-3/4” in width
* Battery box is built-in and accepts Softail size batteries (requires purchase of K13006 rear mounting bracket) see page 139
Swingarms
Fenders
Struts
Gas Tanks
K90057
K90058
K90059
K90060
ROUND OIL TANK w/BATTERY BOX . . . CHROME / 3-1/2 QT SIDE FILL
STOCK WIDTH & RIGID FRAMES / EQUAL LENGTH WINGS
ROUND OIL TANK w/BATTERY BOX . . . RAW / 3-1/2 QT SIDE FILL
ROUND OIL TANK w/BATTERY BOX . . . CHROME / 3-1/2 QT CENTER FILL
STOCK WIDTH & RIGID FRAMES/EQUAL LENGTH WINGS
ROUND OIL TANK w/BATTERY BOX . . . RAW / 3-1/2 QT CENTER FILL
Oil Tanks
Fwd
Controls
ROUND OIL TANKS/UNIVERSAL
* Custom-crafted from 16 gauge steel, these models are available in a lustrous chrome finish or raw, ready to prep & paint
* 4 Quart capacity, side fill only
* Tanks measure 5-1/2” O.D. x 11-3/4” in width
Kickstands
Handlebars
Exhaust
K90047 ROUND OIL TANK/UNIVERSAL . . . CHROME . . . 4 QT / SIDE FILL
K90048 ROUND OIL TANK/UNIVERSAL . . . RAW STEEL . . . 4 QT / SIDE FILL
Misc.
Oil Tanks
113
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
Fwd Controls
Kickstands
Handlebars
Exhaust
Misc.
112
Fwd Controls
Frames
Crafted from thick steel, polished & plated to
a jewel-like finish, our forward control sets have
long been an industry standard. They seem to
blend with virtually any style and offer
uncompromising service by way of the brake
and shift levers riding on bronze bushings,
resulting in a smooth, positive feel that remains
consistent time & time again.
Swingarms
Fenders
Struts
Gas Tanks
K70011 Set
Oil Tanks
FORWARD CONTROL KITS
Fwd
Controls
Our forward controls are sold as a basic set, without
pegs & master cylinders. Personal
preference is important, therefore we’ve left the choice
of pegs & brake cylinder up to you.
Evolution Big Twin and FXR sets require male mount
pegs, whereas Big Twin mid-mount and Sportster sets
will accept female mount pegs. All control sets are
delivered with a full complement of mounting hardware as well as an exploded view of the set with all
pieces clearly illustrated and keyed.
Replacement components are available.
Take advantage of big time performance & good looks
at budget-minded prices !
Kickstands
Handlebars
Exhaust
Misc.
Fwd Controls
115
FORWARD CONTROL KITS FOR BIG TWINS
Frames
* FOR SOFTAIL 5-SPEED MODELS 1986-1999 AND FL/FX/FXWG 4-SPEED MODELS, 1958-1986
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K70004 FORWARD CONTROL KIT . . . FOR 1986-1999 SOFTAIL MODELS & 4-SPEED FL/FX/FXWG MODELS 1958-1986
2” EXTENDED KITS FOR BIG TWINS
Fwd
Controls
* FOR SOFTAIL 5-SPEED MODELS 1986-1999 AND FL/FX/FXWG 4-SPEED MODELS 1958-1986
Kickstands
Handlebars
Exhaust
Misc.
K70010 2” EXTENDED FORWARD CONTROL KIT. . . FOR 1986-1999 SOFTAIL MODELS & 4-SPEED
FL/FX/FXWG MODELS 1958-1986
116
Fwd Controls
FORWARD CONTROL KIT FOR BIG TWIN FX/FXE MODELS 1973-1985
w/MID-MOUNT CONTROLS
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K70003
FORWARD CONTROL KIT/MID-MOUNT . . . FOR FX/FXE MODELS 1973-85 (EXCEPT SOFTAIL & 4-SPEED FXWG)
FORWARD CONTROL KIT FOR FXR’S 1982-1994
Fwd
Controls
Kickstands
Handlebars
Exhaust
Misc.
K70011 FORWARD CONTROL KIT . . . FOR FXR MODELS 1982-1994
Fwd Controls
117
FORWARD CONTROL KIT FOR EVOLUTION SPORTSTERS/1986-2003
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K70005 FORWARD CONTROL KIT. . . FOR EVOLUTION SPORTSTERS 1986-2003
Fwd
Controls
2” EXTENDED KIT FOR EVOLUTION SPORTSTERS / 1986-2003
Kickstands
Handlebars
Exhaust
Misc.
K70006 2” EXTENDED FORWARD CONTROL KIT . . . FOR EVOLUTION SPORTSTERS 1986-2003
118
Fwd Controls
FORWARD CONTROL KIT FOR SPORTSTERS / 1977-1979
Frames
Swingarms
Fenders
Struts
Gas Tanks
Oil Tanks
K70002 FORWARD CONTROL KIT . . . FOR SPORTSTERS 1977-1978
Fwd
Controls
FORWARD CONTROL KIT FOR SPORTSTERS / 1957-1974 & 1976
Kickstands
Handlebars
Exhaust
Misc.
K70001 FORWARD CONTROL KIT . . . FOR SPORTSTERS 1957-1974 & 1976
Fwd Controls
119
KICKSTANDS FOR BIG TWINS & SOFTAILS
Frames
* Round & flat bottom models for all Big Twins and Softails 1936-1988
* Available in stock lengths, 1” over (for 4”-6” over forks) and 1” under (for lowered bikes)
* Crafted from steel & heat treated, all models feature lustrous chrome plating
Round Bottom
Swingarms
Fenders
Struts
K60028
K60029
K60030
KICKSTAND/ROUND . . . 1” UNDER STOCK LENGTH . . . FOR BIG TWINS & SOFTAILS 1936-1988
KICKSTAND/ROUND . . . STOCK LENGTH . . . FOR BIG TWINS & SOFTAILS 1936-1988
KICKSTAND/ROUND . . . 1” OVER STOCK LENGTH . . . FOR BIG TWINS & SOFTAILS 1936-1988
Gas Tanks
Flat Bottom
Oil Tanks
K60026
K60027
Fwd
Controls
KICKSTAND/FLAT BOTTOM . . . STOCK LENGTH . . . FOR BIG TWINS & SOFTAILS 1936-1988
KICKSTAND/FLAT BOTTOM . . . 1” OVER STOCK LENGTH . . . FOR BIG TWINS & SOFTAILS 1936-1988
Kickstands
Handlebars
Exhaust
Misc.
Kickstands
121
Frames
KICKSTANDS FOR SPORTSTERS /1957-EARLY 1984
Swingarms
FLAT BOTTOM
ROUND BOTTOM
Fenders
Struts
Gas Tanks
K60034
K60035
K60031
K60032
K60033
Oil Tanks
Fwd
Controls
KICKSTAND/FLAT BOTTOM . . . STOCK LENGTH . . . FOR SPORTSTERS 1957-EARLY 1984
KICKSTAND/FLAT BOTTOM . . . 1” OVER STOCK LENGTH . . . FOR SPORTSTERS 1957-EARLY 1984
KICKSTAND/ROUND . . . 1” UNDER STOCK LENGTH . . . FOR SPORTSTERS 1957-EARLY 1984
KICKSTAND/ROUND . . . STOCK LENGTH . . . FOR SPORTSTERS 1957-EARLY 1984
KICKSTAND/ROUND . . . 1” OVER STOCK LENGTH . . . FOR SPORTSTERS 1957-EARLY 1984
KICKSTANDS FOR 1982-1990 FXR’S
* Hand crafted from steel, heat treated & chrome plated
* Pivot pin is included
Kickstands
Handlebars
Exhaust
K60038
KICKSTAND w/PIN . . . FOR FXR’S 1982-1990 / STOCK LENGTH
Misc.
122
Kickstands
Frames
T-BARS / PULLBACK DRAG BAR STYLE
* Stylish selection of pullback drag bars featuring built-in risers (threaded for 1/2”-20 bolts)
* Available with wiring dimples for 1982 & later controls or without dimples for early controls
* Fully polished & plated, these 1” diameter bars measure 24” wide and have an 8” overall pullback
* They fit forks with riser spacing of 3-1/2”
Swingarms
Fenders
Struts
Gas Tanks
10” RISE
K80003 PRE-1982
K80006 1982-UP
Oil Tanks
Fwd
Controls
8” RISE
K80002
K80005
PRE-1982
1982-UP
6” RISE
K80001
K80004
PRE-1982
1982-UP
Kickstands
Handlebars
Exhaust
Misc.
124
Handlebars
Frames
T-BARS / BUCKHORN STYLE
*
*
*
*
1” Diameter buckhorn style bars featuring 7-1/2” internal risers (1/2”-20 thread)
These bars fit triple trees with 3-1/2” riser centers
Drilled and slotted for hidden wiring, they accept early, late and custom controls
Bars measure 29-1/2” wide * Overall pullback is 9-1/2”
Swingarms
Fenders
Struts
Gas Tanks
K80023
BUCKHORN STYLE T-BAR
Oil Tanks
1-1/4” BEEFY BARS
Fwd
Controls
* Sleek, stylish and substantial these bars feature the large 1-1/4” tubing to make their statement
* These one-piece wonders showcase smooth bends reducing to 1” diameter at the control ends
* Integral risers are on 3-1/2” centers & drilled for 1/2”-20 bolts
* Drilled and slotted for internal wiring, they accept early and late & custom controls
* Bars measure 31” wide, have an 8” rise and a 6” overall pullback
Kickstands
Handlebars
Exhaust
K80014
1-1/4” BEEFY BARS
Misc.
Handlebars
125
KNURLED CUSTOM BARS
Frames
Swingarms
*
*
*
*
1” Diameter bars knurled at the riser mounting points to help prevent slipping
Drilled and slotted for hidden wiring
These handlebars accept early, late and custom style controls
Brilliant chrome finish
APE HANGER BAR
Fenders
Struts
K80019
33” WIDE / 12-1/2” RISE / 7-1/2” PULLBACK
8-1/2” CENTER WIDTH
Gas Tanks
Oil Tanks
CRUISER STYLE BAR
K80021
34” WIDE / 11-1/2” RISE / 8-1/4” PULLBACK
Fwd
Controls
Kickstands
DRESSER STYLE BAR
K80022
35-1/2” WIDE / 4-1/2” RISE / 7-3/4” PULLBACK
10” CENTER WIDTH
Handlebars
Exhaust
MEDIUM BUCKHORN BAR
K80020
Misc.
126
Handlebars
28-3/4” WIDE / 6” RISE / 10-1/2” PULLBACK
Frames
Swingarms
MUFFLER PIPES / 1-3/4” & 2”
* A wide selection of great fitting, high quality muffled exhaust systems
* Available with 1-3/4” or 2” head pipes smoothly flowing into 2-1/2” or 3” tapered or slash cut mufflers
* Each set is crafted from 16 gauge tubing, mandrel bent on CNC benders and polished in-house, then nickle-chrome plated
* Feature hidden channel mounting. . . T-bolts supplied
FOR EVOLUTION SOFTAIL 1984-2003 & EVOLUTION FX MODELS 1985-1986
Fenders
Struts
TAPERED MUFFLER
K11041
K11043
Gas Tanks
Oil Tanks
SLASH CUT MUFFLER
K11042
K11044
Fwd
Controls
1-3/4” TAPERED MUFFLER EXHAUST SET
FITS SOFTAIL & EVO FXWG/FXE/FXSB MODELS
2” TAPERED MUFFLER EXHAUST SET
(SHOWN)
1-3/4” SLASH CUT MUFFLER EXHAUST SET
(SHOWN)
2” SLASH CUT MUFFLER EXHAUST SET
FOR DYNA GLIDE MODELS 1991-2003
Kickstands
TAPERED MUFFLER
K11035
K11036
Handlebars
FITS DYNA GLIDE MODELS 1991-2003
(SHOWN)
Exhaust
SLASH CUT MUFFLER
K11037
K11038
Misc.
128
Exhaust
(SHOWN)
MUFFLER PIPES w/S-BEND REAR PIPE FOR DYNA GLIDES 1991-2003
Frames
Swingarms
Fenders
Struts
K11061
1-3/4” TAPERED MUFFLER EXHAUST SET FOR DYNA GLIDES 1991-2003 . . . w/S-BEND REAR PIPE
Gas Tanks
Oil Tanks
Fwd
Controls
K11062
1-3/4” BOTTOM SLASH CUT EXHAUST SET FOR DYNA GLIDES 1991-2003 . . . w/S-BEND REAR PIPE
Kickstands
Handlebars
Exhaust
K11063
Misc.
1-3/4” SIDE SLASH CUT EXHAUST SET FOR DYNA GLIDES 1991-2003 . . . w/S-BEND REAR PIPE
Exhaust
129
Frames
FOR FXR MODELS 1984-1994/1999
Swingarms
TAPERED MUFFLER
K11021
K11023
Fenders
Struts
FITS FXR MODELS 1984-1994/99
(SHOWN)
Gas Tanks
SLASH CUT MUFFLER
K11022
K11024
Oil Tanks
Fwd
Controls
(SHOWN)
FOR FX/FXE MODELS 1971-1984 & 1980-1982 FXWG
Kickstands
TAPERED MUFFLER
K11025
K11027
Handlebars
FITS FX/FXE 1971-84 & FXWG 1980-82
(SHOWN)
FITS FX/FXE 1971-84 & FXWG 1980-82
Exhaust
SLASH CUT MUFFLER
K11026 1-3/4” SLASH CUT MUFFLER EXHAUST SET
FITS FX/FXE 1971-84 & FXWG 1980-82
K11028 2” SLASH CUT MUFFLER EXHAUST SET
Misc.
FITS FX/FXE 1971-84 & FXWG 1980-82
(SHOWN)
130
Exhaust
Frames
MUFFLER PIPES / 1-3/4”
FOR SHOVELHEAD FL/FLH MODELS 1970-1984 (KICK or ELECTRIC START)
Swingarms
SLASH CUT MUFFLER
FITS SHOVELHEAD 1970-84 FL/FLH (KICK or ELECTRIC)
FEATURES OVER THE TRANSMISSION REAR
PIPE WHICH CLEARS BIG BATTERY AND A
FRONT PIPE THAT CLEARS STOCK FLOORBOARD
MOUNTS
Fenders
Struts
Gas Tanks
FOR SHOVELHEAD FLH MODELS 1970-1984 (ELECTRIC START ONLY)
K11029 1-3/4” TAPERED MUFFLER EXHAUST SET
Oil Tanks
TAPERED MUFFLER
Fwd
Controls
FITS SHOVELHEAD 1970-84 FLH MODELS (ELECTRIC START)
FEATURES UNDER THE TRANSMISSION REAR PIPE
WHICH CLEARS LARGE FLH BATTERY & A FRONT PIPE
CLEARING FACTORY FLOORBOARDS & FORWARDMOUNTED MASTER CYLINDER
Kickstands
Handlebars
SLASH CUT MUFFLER
Exhaust
FITS SHOVELHEAD 1970-84 FLH (ELECTRIC START)
FEATURES UNDER THE TRANSMISSION REAR
PIPE WHICH CLEARS LARGE FLH BATTERY &
A FRONT PIPE WHICH CLEARS FACTORY
FLOORBOARDS & FORWARD-MOUNTED
MASTER CYLINDER
Misc.
Exhaust
131
Frames
MUFFLER PIPES / 1-3/4”
FOR PANHEAD MODELS 1948-1965
Swingarms
TAPERED MUFFLER
SLASH CUT MUFFLER
Fenders
Struts
K11033
Gas Tanks
FITS PANHEAD MODELS 1948-1965
TAPERED MUFFLER
K11034
SLASH CUT MUFFLER
Oil Tanks
‘S’ PIPE
Fwd
Controls
K11018
‘S’ TYPE FRONT PIPE
‘S’ PIPE
‘S’ TYPE FRONT PIPE
Kickstands
2 INTO 1 HEADER PIPES / 1-3/4”
FOR SHOVELHEAD FL/FLH 1970-1984
Handlebars
Exhaust
Misc.
K11012 1-3/4” HEADER PIPE SET / 2 INTO 1 STYLE
FOR SHOVELHEAD FL/FLH 1970-1984
132
Exhaust
K11011 1-3/4” HEADER PIPE SET (3 PCS) / 2 INTO 1 STYLE
Frames
FOR EVOLUTION SPORTSTER MODELS 1986-2003
Swingarms
K11045 1-3/4” TAPERED MUFFLER EXHAUST SET
K11047
TAPERED MUFFLER
FITS EVO SPORTSTER MODELS 1986-2003
(SHOWN)
Fenders
Struts
Gas Tanks
SLASH CUT MUFFLER
K11046
K11048
(SHOWN)
Oil Tanks
Fwd
Controls
FOR SPORTSTER MODELS 1957-1985 (except 1979)
K11051
K11049
FITS SPORTSTERS 1957-1985 (EXCEPT 1979)
(SHOWN)
TAPERED MUFFLER
Kickstands
Handlebars
Exhaust
SLASH CUT MUFFLER
K11052
Misc.
Exhaust
133
Frames
DRAG PIPES / 1-3/4” & 2”
Swingarms
* Pipes that fit and look great too. . . not to mention the sound
* Mandrel bent on CNC benders, the 16 gauge tubing is polished at our facility, then nickle chrome plated for that great look
* Most models mount to OEM mounting bracket via the hidden channel mounts on the back side of the pipes. . .T-bolts supplied
* These drag pipes are sold in two versions. . . 1-3/4” diameter and 2” diameter
FOR SOFTAIL MODELS 1984-2003 & EVOLUTION FX MODELS 1985-1986
Fenders
Struts
Gas Tanks
K11006
K11055
Oil Tanks
1-3/4” DRAG PIPE SET. . . 40” LONG
2” DRAG PIPE SET. . . 40” LONG
(SHOWN)
K11068
2” SHOTGUN DRAG PIPE SET
FITS SOFTAILS 1984-2003
FOR DYNA GLIDE MODELS 1991-2003
Fwd
Controls
Kickstands
Handlebars
(SHOWN)
K11013
FOR EVOLUTION FXR MODELS 1984-1994/99
Exhaust
Misc.
134
K11007
Exhaust
K11005
(SHOWN)
K11054
DRAG PIPES / 1-3/4” & 2”
Frames
FOR EVOLUTION SPORTSTER MODELS 1986-2003
K11009
1-3/4” DRAG PIPE SET . . . 40” LONG
FOR EVO SPORTSTER MODELS 1986-2003
(SHOWN)
K11020
2” DRAG PIPE SET . . . 40” LONG
FOR EVO SPORTSTER MODELS 1986-2003
Swingarms
Fenders
Struts
K11008
K11056
(SHOWN)
Gas Tanks
* Requires purchase of K14043 brake pedal stop if running
on 1980-1985 models
Oil Tanks
FOR SHOVELHEAD FX/FL 4-SPEED MODELS
Fwd
Controls
K11004
FOR FX/FL MODELS 1970-1984 / KICK or ELECTRIC START
REAR PIPE ROUTED OVER THE TRANSMISSION
(SHOWN)
K11053
FOR FX/FL MODELS 1970-1984 / KICK or ELECTRIC START
REAR PIPE ROUTED OVER THE TRANSMISSION
K11003 1-3/4” DRAG PIPE SET. . . 36” LONG
FOR FL/FLH MODELS 1970-1984
KICK or ELECTRIC START / REAR PIPE
ROUTED IN FRONT OF TRANSMISSION
FOR SHOVELHEAD MODELS 1966-1969
Kickstands
Handlebars
Exhaust
Misc.
K11002 1-3/4” DRAG PIPE SET . . . 36” LONG
FOR EARLY SHOVEL MODELS 1966-1969
K11001
1-3/4” DRAG PIPE SET . . . 34” LONG
Exhaust
135
Frames
SPECIALTY DRAG PIPES / FOR DYNA GLIDE MODELS 1991-2003
2” UPSWEPT DRAG PIPES w/SLASH CUT ENDS
Swingarms
K11065
2” UPSWEPT DRAG PIPES w/SLASH CUT ENDS
FOR 1991-2003 DYNA GLIDE MODELS
Fenders
Struts
2” LONG ‘N LOW DRAG PIPES w/SLASH CUT ENDS
Gas Tanks
K11057 2” LONG ‘N LOW DRAG PIPES w/SLASH CUT ENDS
Oil Tanks
Fwd
Controls
1-3/4” S-BEND DRAG PIPES w/SLASH CUT ENDS
Kickstands
K11059 1-3/4” S-BEND DRAG PIPES w/SLASH CUT ENDS
Handlebars
1-3/4” LONG ‘N LOW S-BEND DRAG PIPES w/SLASH CUT ENDS
Exhaust
K11060 1-3/4” LONG ‘N LOW S-BEND PIPES w/SLASH CUT ENDS
Misc.
136
Exhaust
MISCELLANEOUS
Frames
SIDE MOUNT TAILLIGHT/LICENSE PLATE BRACKET / STAINLESS STEEL
Here’s a fine selection of simple, yet sturdy, axle-mount taillight and license plate brackets. Designed for either left
side or right side mounting, these durable stainless creations are offered as a complete assembly for both license plate
& taillight or license plate only. They’re made for Softail-style or Rigid frames when running wheels with 3/4” rear axles.
Swingarms
AAAAAAAAAITAILLIGHT/LICENSE PLATE BRACKET
Fenders
Struts
Recommended taillight is cat-eye style
(not included).
K14073
K14074
TAILLIGHT/LICENSE BRACKET
LEFT SIDE MOUNTING / STAINLESS
TAILLIGHT/LICENSE BRACKET
RIGHT SIDE MOUNTING / STAINLESS
Gas Tanks
LICENSE PLATE BRACKET ONLYMMMMMMMMMM
Oil Tanks
K14075 LICENSE PLATE BRACKET ONLY
Right or Left
Side Mounting
K14076
LEFT SIDE MOUNTING / STAINLESS
LICENSE PLATE BRACKET ONLY
RIGHT SIDE MOUNTING / STAINLESS
Right or Left
Side Mounting
Fwd
Controls
WELD ON FRAME BRACKETS FOR BIG TWIN AND CUSTOMS
Weld-on frame brackets for repairing damaged frames or adding required mounts that custom bike builders often
need but are very time consuming to fabricate.
WELD ON FRAME BRACKETS
K14016
Kickstands
K14019
Handlebars
K14015 ELECTRICAL CONNECTOR BRACKET
K14016
EXTERNAL OIL FILTER MOUNT
K14017 REAR MASTER CYLINDER
K14019
K14017
Exhaust
K14015
MOUNT BRACKET
CLUTCH CABLE & HORN
MOUNT BRACKET
Misc.
Miscellaneous
137
MISCELLANEOUS
Frames
STAINLESS STEEL SPLASH GUARD
Looking for an inner debris deflector that fits well, looks great and
gets the job done . . . this is the one. Crafted from quality stainless
steel, then polished, this splash guard mounts to Softail models
1986-1999 and fits our Softail-style frames too.
Swingarms
K14009 STAINLESS SPLASH GUARD FOR SOFTAIL-STYLE FRAMES
Fenders
Struts
TOP MOTOR MOUNT FOR SOLID MOUNT EVO ENGINES
Made from 1/4” steel, then polished and plated to a high lustre
finish this top motor mount gets the job done. Will fit solid mount
Evolution engines, including most strokers too.
Gas Tanks
K14012 TOP MOTOR MOUNT FITS SOLID MOUNT EVO ENGINES
K14013 TOP MOTOR MOUNT WITH COIL MOUNT FITS EVO ENGINES
Oil Tanks
K14091 STAINLESS SPLASH GUARD FOR 250 RSD REAR SECTION
Fwd
Controls
MOUNTING HARDWARE FOR SOFTAIL-STYLE STRUTS
These kits are specifically designed for mounting our curved struts as well as
strutless fenders to Softail-style frames. Available in raw or bright chrome finish.
Kits include 2 pieces 1/2-13 x 1” flathead allen bolts as well as 4 pieces
3/8-16 x 1” buttonhead bolts.
Kickstands
Handlebars
K14071
K14072
Exhaust
MOUNTING KIT FOR FLATSIDE STYLE GAS TANKS
This kit with its high quality components can be used as
a replacement for stock equipment or for the builder to mount
flatside fatbob gas tanks to Softail-style frames.
Misc.
K14038 . . . FLATSIDE FATBOB TANK MOUNTING KIT
138
Miscellaneous
STRUT TO FRAME HARDWARE KIT . . . RAW
STRUT TO FRAME HARDWARE KIT . . . CHROME
OIL TANK ACCESSORIES
Frames
A. FRONT OIL TANK BRACKET
These heavy duty, thick brackets are designed to mount
to the seat post tab on the frame, thereby allowing
the mounting of Softail-style oil tanks on Softail-style
and Rigid frames. Available in chrome finish or raw, ready for
prep and paint.
A
K14040
K14041
Swingarms
FRONT OIL TANK BRACKET . . .RAW
FRONT OIL TANK BRACKET . . . CHROME
Fenders
Struts
B. REAR OIL TANK BRACKET
A high quality replacement style bracket for the rear of all
Softail-style oil tanks. Replaces OEM 62704-84.
B
K13006
REAR OIL TANK BRACKET . . . CHROME
Gas Tanks
C. REPLACEMENT FRONT OIL TANK BRACKET
This bracket is a replacement for the stock front oil tank bracket as used
on stock Softail frames.
Replaces OEM 62707-84.
C
K13007
FRONT OIL TANK BRACKET . . . CHROME
Oil Tanks
D. FRONT OIL TANK BRACKET FOR ROUND OIL TANKS
D
Use this bracket assembly for mounting the front of our
round oil tanks to the seat post tab on the frame. Includes
adapter bracket, rubber grommet, washers and nut.
K14045
Fwd
Controls
FRONT BRACKET FOR ROUND OIL TANKS
E. OIL TANK CAP w/DIPSTICK
Replacement for the filler cap on all our oil tanks.
E
K14046
OIL TANK CAP w/DIPSTICK
Kickstands
POSITIVE AXLE LOCK COVERS
FORK END CAPS FOR FXR -STYLE FRAMES
Handlebars
These steel covers are the finishing touch for the swingarms on our Softailstyle frames #K15010-K15011-K15012-K15017-K15018. They cleanly cover
the rear axle plates and hide both axle and adjusters. Sold in pairs.
K20050
K20051
POSITIVE AXLE LOCK COVERS . . . RAW
POSITIVE AXLE LOCK COVERS . . . CHROME
Exhaust
These end caps are designed for stock width FXR frames. These pivot
blocks are all steel and precision machined. Sold in pairs, with a high
lustre chrome finish or powder coated black finish.
K20021
K20022
FORK END CAPS FOR FXR STOCK WIDTH FRAMES . . . BLACK
FORK END CAPS FOR FXR STOCK WIDTH FRAMES . . . CHROME
Miscellaneous
139
Misc.
Frames
MISCELLANEOUS
EXHAUST MOUNTING BRACKETS
K13009 EXHAUST MOUNTING BRACKET . . . BLACK/BAR STOCK
Swingarms
FOR SOFTAIL MODELS 1984-2003 (except FLSTN/FLSTF)
K13002
Fenders
Struts
EXHAUST MOUNTING BRACKET . . . CHROME
FOR FXR MODELS 1987-UP / REPLACES OEM 65674-87
K13003 EXHAUST MOUNTING BRACKET . . . CHROME
FOR SPORTSTER MODELS 1980-UP
REPLACES OEM 65599-80A
Gas Tanks
CENTER POST & COIL MOUNT
FOR STOCK & OUR TC88-B SOFTAIL-STYLE FRAMES
This center post assembly with integral coil
mount is available as a replacement for
the stock unit as fitted on Twin Cam 88-B
Softail-style frames, as well as for our Twin
Cam 88-B frames, Softail-style and Rigid.
Oil Tanks
Fwd
Controls
REAR WHEEL PULLEY SPACER
Machined aluminum polished spacer. Use it to space out belt pulley
when running stock wheel in a 180 width frame.
K14103
K14104
.900” Thick REAR WHEEL PULLEY SPACER ALUMINUM POLISHED
1.090” Thick REAR WHEEL PULLEY SPACER ALUMINUM POLISHED
K14035 CENTER POST & COIL MOUNT
FOR TWIN CAM 88-B FRAMES
Kickstands
BELT GUARDS
LEFT SIDE DRIVE BELT GUARDS
FOR SOFTAIL STYLE FRAMES
RIGHT SIDE DRIVE BELT GUARDS
FOR SOFTAIL STYLE FRAMES
LEFT SIDE DRIVE BELT GUARDS
FOR RIGID FRAMES
K14034 RAW BELT GUARD FOR
K14037
K14101
K14108 CHROME BELT GUARD FOR
Handlebars
Exhaust
Misc.
LSD SOFTAIL STYLE FRAMES
CHROME BELT GUARD FOR
LSD SOFTAIL STYLE FRAMES
RSD SOFTAIL STYLE FRAMES
CHROME BELT GUARD FOR
RSD SOFTAIL STYLE FRAMES
ORDER NOW . . . 818-837-3520
140
Miscellaneous
LSD RIGID FRAMES
LSD RIGID FRAMES FRAMES
FAX . . . 818-837-3522
Hours: Monday thru Friday 7:00am to 5:00pm P.S.T.
Ph: 818-837-3520
Fax: 818-837-3522
email: info@krafttechinc.com
www.krafttechinc.com
141
Terms and Conditions
Pricing
Suggested Retail Prices shown in this publication are supplied for reference ONLY. All Prices are subject to change without notice, as we
incur price increases from our Vendors. We reserve the right to correct printed errors. These prices do not reflect freight, duties, state or
local taxes, or any other fees incurred by our Dealers. We will quote current prices to telephone inquires whenever requested.
Shipments
All merchandise is F.O.B. Valencia, California. All orders will be shipped via UPS or Fed-Ex ground, unless the order is too large or specified
otherwise by customer. Any refused shipments will be charged a 25% restocking fee plus all outbound and inbound freight charges.
Freight Damaged Merchandise
All merchandise is packed, and in good condition at the time of shipment. Ownership responsibility of parts is passed on through our
common carrier to our customers at the arrival of the shipment. Our carrier takes on the responsibility for damaged or missing parts. Any
damaged claim must be filed with the carrier at the time of delivery not with Kraft/Tech, Inc. Parcels must be signed as “damaged” at the
time the shipment is accepted.
Payment Terms
Standard terms are C.O.D- cash or certified check. C.O.D. Company check is a credit privilege. We will accept checks from Dealers whose
financial history justifies this credit privilege. If a C.O.D. shipment is refused, the customer is liable for transportation costs and a 25%
restocking fee will be added to a future order and a 50% deposit may be required on future orders. If your bank returns a check to us for
Non-Sufficient-Funds your account will automatically revert to CASH ONLY.
Open account terms will be extended as a courtesy to selected well-rated companies. Open account terms are NET 10 Days from invoice
date. Your account will be delinquent 30 days from date of invoice. Delinquent accounts will have their orders retained until the account
becomes current and may revert to C.O.D cashiers check or CASH.
Credit Card Payment
Kraft/Tech, Inc. accepts VISA and MASTERCARD. If your credit card is declined, we will ship the order according to your normal payment
terms.
Merchandise Return
A “return merchandise authorization number” must be obtained prior to returning merchandise to kraft/tech, inc. Returns will not be
accepted without an rma #. Merchandise will only be considered for return if the request is made within 30 days from the date of invoice.
A re-stocking fee will be charged unless otherwise specified.
All returns must be pre-paid, returns are not accepted c.o.d. All returns are subject to inspection to receive credit. Any merchandise that
requires a manufacturer’s statement of origin (mso) must be returned with the original part or credit will not be issued. Reimbursements
for approved returns will be in the form of merchandise credit only. cash or checks will not be issued. Wrong parts shipped to you due to
picking and packaging error will be replaced or credited to your account at your option.
PLEASE NOTE: All returned merchandise must be packaged properly. Customer will be responsible for damage parts during shipping caused
by inadequate packaging.
Manufacturer’s Statement of Origin (MSO)
All MSO’s are shipped via UPS ground following the shipment and full payment of the item(s). A $30.00 processing fee is charged for all
replacement or duplicate MSO’s.
142
IMPORTANT:
Kraft/Tech, Inc. recognizes that motorcycles can be dangerous. Therefore, it expects the dealer and his customers to
exercise their best judgment regarding the installation, use and maintenance of any parts purchased from us. Kraft/
Tech, Inc. assumes no responsibility and shall not be liable for damages or injury sustained as a result of improper
installation, use or maintenance of any parts sold herein.
LIMITED WARRANTY:
All products manufactured by Kraft/Tech, Inc. are warranted to be free from defects in workmanship and material for
a period of one (1) year from the date of purchase. Kraft/Tech, Inc. is not responsible for failure of any product that
results from misuse, modification, improper installation, or used for racing or competition purposes. We reserve the
right to inspect all products returned to Kraft/Tech, Inc. for conformance to our stated warranty policy before replacement or repair. Kraft/Tech, Inc. shall be liable only for the value of the item warranted and not the cost of paint,
installation, or removal. Chrome plating shall be warranted for a period of ninety (90) days from the date of
purchase. Corrosion due to salt spray in beach areas is not covered by the warranty. The warranties herein are
exclusive and there are no warranties which extend beyond the description on the face hereof, including any implied
warranty of merchantability and liability for consequential damages. No warranties of fitness for a particular purpose
have been made in consideration of this sale.
DISCLAIMER:
Kraft/Tech, Inc. is not affiliated, supported, or endorsed by Harley-Davidson Inc. and the following Harley-Davidson
designations and trademarks are utilized in this catalog for references purposes only: EL, FL, FLH, FLHR, FLHS, FLHT,
FLHTC, FLHTC-1, FLHTC ULTRA CLASSIC, FLTR , FLHR, FLHRC, FLHRS, FLTC, FLTCU, FLTRSEI, FLHX, FXB, FXD, FXDB, FXDC,
FXDG, FXDL, FXDS, FXDS-CONV., FXDWG, FXE, FXEF, FXLR, FXR, FXRC, FXRD, FXRDG, FXRP, FXRS, FXRSE, FXRS-CONV.,
FXRS-SP, FXRT, FXS, FXSB, FXST, FXSTC, FXSTS, FXSTSB, FXWG, GE, K, KH, WL, WLA, XL, XLCH, XLCR, XLH, XLH 883,
XLH 1100, XLH 1200, XLR, XLS, XLT, XLX AND XR-1000, Buddy Seat, Buell, Disc Glide, Duo Glide, Dyna Glide, Electra
Glide, Evolution, Harley-Davidson, Harley, H-D, Heritage Softail, Hugger, Fat Boy, Fat Bob, Low Glide, Low Rider, Road
King, Roadster, Softail, Sport Glide, Sportster, Sturgis, Super Glide, Tour-pak, Tour Glide, Twin Cam 88, Ultra Classic and
Wide Glide.
143
Profile
"35 Years of Experience"...
Kraft/Tech, Inc. was founded in 1990 by Javier Mendoza as a polishing and fabrication company, specializing in products
for the motorcycle industry. Mr. Mendoza’s background as a machinist and a tool and die maker was the foundation for
Kraft/Tech to build aftermarket motorcycle parts. With his professionalism, knowledge, passion and over 35 years of
experience in the motorcycle industry, Mr. Mendoza has led Kraft/Tech to be one of the most successful manufacturers of
top quality, affordable motorcycles parts, in volume, with short delivery times.
"New Dealer Direct Program "...
Up until now we have solely been a manufacturer, a well-oiled production facility, building top quality motorcycle parts
for distributors and OEM motorcycle manufacturers. To expand your options, we have introduced our new dealer direct
program. Now you will be able to purchase our complete product line through our growing dealer network, which in turn,
can purchase directly from us or one of our distributors.
"Our New 280mm, 300mm and 330mm Tire Frames "...
Our fifteen years of experience have helped us to continue to expand our manufacturing capabilities to include a wide
variety of aftermarket motorcycle parts and accessories. We offer an enormous selection of frames with over 300
different part numbers, tubing sizes up to 1-1/2” diameter, various neck rakes, front leg and backbone stretches, from
stock width to our new 280mm, 300mm and 330mm tire frames.
"Highest Quality aftermarket parts in the U.S.A. "...
We are dedicated to creating the highest quality aftermarket parts in the USA by combining state-of-the-art equipment,
only the best materials and up-to-date management techniques with time-honored traditions of quality workmanship
and attention to your needs. Our product line includes Frames, Gas Tanks, Oil Tanks, Forward Controls, Fenders, Struts,
Exhaust, Kickstands, Handlebars and other chrome plated parts. We base our professionalism on the principles of old
world craftsmanship and customer service. Our management team has over 30 years of combined motorcycle experience
providing excellent customer service. We occupy two buildings with 74,000 sq. feet of space that houses our welding
shop, machine shop, bending operations and polishing facilities and over 32,000 sq. feet of warehouse space offering
stock on-hand every single day. We ask you to sit down and enjoy the ride through our enormous selection of top quality
motorcycle parts.
We look forward to earning your respect and business everyday!

softail-style frames / 1-3/8” mega-tube

Transcription

Similar documents

Dagger CurveD Dagger

Kiwanis Clubs Ranked According to Size KIWANIS

rigid frames / 1-3/8” mega-tube

rigid frames / 1-1/4” tubing

badge holders

Recruitment and Activation of a Lipid Kinase by Hepatitis C

coffee. 4

Assessment Practices at TU Delft

here - Cases Com Au

Hardware Products - Pacific Cargo Control

Amateur Radio Internet Gateway Directory 2003

District of Columbia - Governmentattic.org