a850 old town series

A850 OLD TOWN SERIES
EPA
1.21 (ft2)
WEIGHT
15 LBS
5 YEAR
WARRANTY
MAXIMUM
WATTAGE
250W
UL
LISTED
HID
JOB NAME
FIXTURE TYPE
MEMO
BUILD A PART NUMBER
ORDERING EXAMPLE: 2A-A850-5P-100HPS120-MED-RE5-A-PEC-FHS/50PM/4212FP4/BKT
Mounting
Config.
Fixture
Fitter
Ballast
Volts
Socket
Optic
Lens
Option
Ring
Option
Photocontrol
Option
GFI
Option
Term.
Block
Mounting Configuration
Options
(Click here to view mounting configuration sheet)
• CDR Cast Decorative Ring
• CDR-CL5 Cast Decor Ring with Custom Logo
• PBDR6 Perforated Brass Decorative Ring
• PEC Electronic Photocontrol 120-277 Volt
• R7 Receptacle Only for Twist-Lock Photocontrol
• R17 Twist-Lock Photocontrol & Receptacle (120v-277v)
• G7 15A Duplex GFI for Utility Fitter
• TB7 Terminal Block
• FHS8 Single Fuse & Holder - 120, 277 Volt
• FHD8 Dual Fuse & Holder - 208, 240, 480 Volt
• LAMPS See Lamp Spec Sheet
• 1W
• PT
• 1A
• 1APT
• 2A
• 2A90
• 2APT
• 3A
• 3A90
• 3APT
• 4A
• 4APT
• 1AM
• 2AM
• 450PB
W = Wall Mount PT = Post Top APT = Post Top Arm Mid-Mount
A = Arm Mount AM = Arm Mid-Mount PB = Pier Base
Fixture
• A850
• A850SR
6
• 5P1
• 73
• 74
• 9901
1
Consult factory for specification details.
Standard is polished. If painted ring specify PBDR-P.
For 900 series utility fitter only.
8
Ships loose for installation in base.
5
Fitter
• 9911
• 9921
• 9931
• 9941
• 9951
• BD4
• BD5
• BD7
• OLF31
• OLF41
• 588
• C20971
Add “T” after fitter designation for optional “Twist-lock” fitter.
Ballast 2, 3
• 35HPS4
• 50HPS
• 70HPS
• 100HPS
• 150HPS • 250HPS
• 50MHP
• 70MHP
• 100MHP
• 150MHP
• 200MHP
• 250MHP
• 26CFL
• 32CFL
• 42CFL
• 57CFL
• 70CFL
• 55QL
• INCAND
edium base sockets standard with ballasts up to 150 watts.
M
Mogul base sockets are standard with ballasts 200 watts
and over. 4-PIN for CFL.
3
Metal halide systems are pulse start.
4
35HPS is 120 volt only.
2
7
Arm (Click here to view arm website page)
See Arms & Wall Brackets specification sheets
• 50 • 70 • 480 • 6236 • TA
• BA
• 478 • 80 • 55
• 579
• TASCR
Pole (Click here to view pole website page)
See Pole specification sheets.
Finish (Click here to view paint finish sheet)
Standard Finishes9
• BKT Black Textured
• WHT White Textured
• PGT Park Green Textured
• ABZT Architectural Medium Bronze Textured
• DBT Dark Bronze Textured
9
Volts
• 120
Custom Finishes
• CM Custom Match
• OI Old Iron
• RT Rust
• WBR Weathered Brown
• CD Cedar
• WBK Weathered Black
• TT Two Tone
10
• 208
• 240
• 277
• 347
• 480
Socket
• MED
Smooth finishes are available upon request.
• MOG • QL • 4P (4-PIN)
Optic • NONE• RE3 • RE5 • LO3 • LO5 • ALZAK • HSS
Lens
• A (Acrylic)
• WA (White Acrylic)
• P (Polycarbonate)
• WP (White Polycarbonate)
10
Custom colors require upcharge.
Sternberg Select Finishes
• VG Verde Green
• SI Swedish Iron
• OWGT Old World Gray Textured
Option
Fuse
Option
Lamps
See Lamp
Spec Sheet
Arm
Pole
See Arm
Spec Sheets
See Pole
Spec Sheets
Finish
Specifications
Fixture
The fixture shall be 16” in diameter and 38-1/2”
tall. It will be made of vandal resistant clear textured polycarbonate or dent resistant (DR) clear
textured acrylic. White textured is also available.
The fixture is available in a sold roof (A850SR) for
added distinction and reduced up-light. The solid
roof will be made of spun aluminum and securely
affixed to the top of the acorn. The optional perforated brass decorative ring (PBDR) is available
in polished brass or painted finish. The 2-1/4”
wide brass filigree allowing light transfer through
decorative openings. The optional CDR is a heavy
cast aluminum ring with four cast medallions
finished in accent gold. Also available are custom
medallions that can be specified with a name,
initial or logo.
Fitter - Standard
The fitter shall be heavy wall cast aluminum, 356
alloy for high tensile strength. It shall have an
8-1/2” inside diameter opening to attach to the
8” neck of the acorn globe. When ordered with
a Sternberg aluminum pole, the fitter shall be
welded to the pole top or tenon for safety and to
ensure the fixture will be plumb, secure and level
over the life of the installation. The fitter shall
have a one-piece ring bug gasket to resist insect
penetration into lamp assembly.
900 Series Utility Fitter Option
The fitter shall be heavy wall cast aluminum, 360
die cast alloy for high tensile strength. It shall
have a 9-1/4” inside diameter opening to attach
to the 8” neck of the acorn globe. It shall have a
hinged, tool-less entry door that provides open
access to all of the components. The 900 series
shall have an optional terminal block for ease of
wiring, an optional Twist-Lock Photocontrol receptacle, an optional single GFCI outlet for auxiliary
power needs. The top mounted ballast mounting plate shall be cast aluminum and provide
tool-less removal from the housing using 2 finger
latches. When ordered with a Sternberg aluminum
pole, the fitter shall be set screwed to the pole
top or tenon. The fitter shall have a one-piece ring
bug gasket to resist insect penetration into lamp
assembly.
See next page
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
3/15 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
A850 OLD TOWN SERIES
HID
Fixture Examples
When supplied with GFI receptacle a hole will be provided
for cord and plug installation with the access door closed.
When cord and plug is not in use a filler plug will be provided and shall be tethered to the fitter for easy recovery
16 5/8"
and installation. 16 1/2"
16-1/2”
16-1/2”
16 1/2"
16 1/2" 18 3/8"
18-3/8”
16 1/2"
16 5/8"
16 5/8"
16 1/2" 18 3/8"
16-5/8”
16 5/8"16 1/2"
18 3/8"
16 1/2"
Twist-Lock Fitter (Optional)
The TL (Twist-Lock) fitter shall have an aluminum die-cast
twist-lock mechanism. The tool-less 1/4 turn action allows
for easy globe removal and replacement. A die-cast ring
assembly is mechanically attached to the globe and is
38 7/8"
38 7/8"
38 7/8"
38 7/8" 38 7/8"
removable
if the globe is broken or
replaced.
38-7/8”
38-7/8”
38 7/8"
38 7/8" 38 3/4"
38-7/8”
38 7/8" 38 7/8"
38 7/8"
38-7/8”
38 3/4"
38 7/8" 38 3/4"
38 7/8"
Electrical
Fixture shall be UL listed in US and Canada. HID ballasts
shall be high power factor with lamp starting down to -30
degrees C. Medium base and mogul base porcelain sockets
are 4KV rated. The ballast/socket assembly shall be prewired when ballast is located in the fitter. Ballasts shall be
DOE EISA compliant.
A850-5P
A850SR-5P
CDR Options
CDR
Gold Medallion
CDR-CL
Custom Logo Cast
Aluminum Deco. Rings
Optical Options
Refractors shall be borosilicate glass with an IES type 3 or
5 distribution, using a vertically mounted lamp. It shall be
secured to the socket/stem with 3/8”plated steel threaded
pipe nipple and rest on a cast aluminum holder with antishock gasket. The refractor will be secured to cast holder
with a quarter-turn internal aluminum twist ring for ease of
maintenance.
Optical Systems
120 0
Alzak Disk shall be an optical shield to help direct light
downward. It shall be 7”diameter and made of specular
reflective aluminum and mounted directly above a vertically
mounted lamp.
NIGHTSKY® OPTI-SHIELD® Louver Optic System shall be a
multi-tier reflector with 7”diameter rings to produce an IES
cut-off type 3 or 5 distribution. The Louver optic System
shall be made of highly specular anodized aluminum and
shall come standard with medium base socket.
House Side Shield shall be an additional optic used to block
120° of light in any one direction.
Photocontrols
10 1/8"
PBDR Option
Perforated Brass
Decorative Ring
PBDR-P
Painted to match
fixture finish
ALZAK
Alzak Disc
RE3
RE5
Refractor
HSS
House Side
Shield
LO3
LO5
Louver Optics
Fitters
10-1/8” W
10-3/8” H
10-1/8” W
10-1/8” W
10-1/8” W
14-1/2” W
9-3/4” W
10-1/8” 10
H 1/8"
10-1/4” H
11-3/4” H
13-1/4”
9 3/4" H
3/4"
10 1/8"
1091/8"
10 1/8"
10 1/8"10 1/8" 10 1/8" 10 1/8" 10 1/8"
10 1/8" 10 1/8" 10 1/8"
10 1/8" 10 1/8" 10 1/8" 10 1/8"10 1/8"
10 1/8" 10 1/8" 10 1/8" 10 1/8"10 1/8"
10 1/8"10 1/8"
14 1/2"14 1/2"
9 3/4"
14-1/4” H 9 3/4"
10 1/8" 10 1/8" 10 1/8"
14 1/2"
9 3/4" 9 3/4"
10 1/8"10 1/8"
Button Style: On single post top fixtures
the photocontrol
14 1
shall be mounted in the fitter and pre-wired to ballast.
9 3/4"9 3/4" 9 3/4" 9 3/4"
9 3/4"
14 1/4"
On multiple head fixture assembly’s photocontrol shall
1/8"
10 1/8" 10 11
1/8"3/4"
10 1/8"
10
101/8"
1/8"
10 1/8" 13
10 1/4"
1/8"
1/8"
1/8"
10 1/8" 10 1/8"11
10 3/4"
1/8"
10 10
1/8"
10 1/8"
10 1/8" 10 1/8"10 1/8"
1010
1/8"
1/8"
10 1/8" 10 1/8"10 1/8"
1010
1/8"
14 1/4" 10131/8"
14
1410
1/4"
13
1/4"
1/4"
13
1/4"
13
1/4"
13
1/4"
10 3/8"
10 1/4"
10 1/8"
11 3/4" 11 3/4" 11 3/4"
11 3/4"11 3/4" 11 3/4" 11 3/4" 11 3/4"
3/8" access plate10and
10 3/8" 10 3/8" 10 3/8" 10 1/4"10 1/4"10 1/8" 10 1/8" 10 1/8" 11 3/4"11 3/4"
10 3/8"
10 1/4" 10 1/4" 10 1/4"
1/8"
1/8"10are
be mounted in the pole shaft
on10an
not pre-wired as ballast housing assemblies and fitters
14131/4"
14 1/4" 14 1/4"
13 1/4"
13 1/4" 13 1/4"13 1/4"
1/4"
11 3/4"
11 3/4" 11 3/4"11 3/4"
11
113/4"
3/4"
11 3/4" 11 3/4"11 3/4"
11 3/4"
are packaged separately for ease of wiring to10source.
3/8"
10 3/8" 10The
10 3/8"
1010
3/8"
1/4"
10 1/4" 10 1/4"10 1/4"
10 1/4"
1/8"
10 1/8"
105T*
1/8"10 1/8"
1010
1/8"
5P
or
BD4
BD5
BD7
73
588
5P a3/8"
BD4
BD5
B7BD7BD7
BD7
7 BD7
electronic button type photocontrol5P
is instant
on with
5-10
5P
BD45P 5PFits
5P
BD5
BD4
BD4
BD4
B7
BD5
BD5
BD5
B7
B7
B7
7
BD7
BD7
588
7
7 588
7
BD4
BD5
B7
7
588
3” OD
Fits 4” OD
Fits 5” OD
Fits 7” OD
Fits 3” OD
(Art Deco 1)
second turn off, and shall turn on at 1.5 footcandles with a
x 3” tall
x 5” tall
x 6” tall
x 1” tall
x 4” tall
Fits 3” OD
tenon/pole
tenon/pole
tenon/pole
tenon/pole
tenon/pole
x 3” tall
turn-off at 2-3 footcandles. Photocontrol is 120-277 volt and
5P 5P 5P 5P
5P
BD4
BD4 BD4BD4 BD4
BD5
BD5 BD5BD5 BD5
B7 B7 B7 B7 BD7
B7BD7
7BD7
7 7 7
588
7
74 BD7BD7 tenon/pole
warranted for 6 years.
Fits 4” OD
Twist-Lock Style: The photocontrol shall be mounted in the
x 4” tall
tenon/pole
10 1/2" pho10 1/2"
utility fitter and pre-wired to ballast. 10The
twist lock type
10 1/2" 10 1/2" 10 1/2"
10 1/2" 10 1/2" 10 1/2"
1/2"10 1/2"
10 1/2"
10 1/2" 10 1/2"10 1/2"
10 1/2" 10 1/2" 10 1/2"
10 1/2"10 1/2"10 1/2" 10 1/2" 10 1/2"
tocontrol is instant on with a 3-6 second turn off, and shall10 1/2"10 1/2"
10 1/2"
10 1/2"10 1/2"
10-1/2” W
10-1/2” W
10-1/2” W
10-1/2” W
10-1/2” W
turn on at 1.5 footcandles with a turn-off at 2-3 footcandles.
10 1/2"
10 1/2" 10 1/2"10 1/2" 15-3/4”
10 1/2" H
10
1/2"
10
1/2"
10
1/2"
10
1/2"
10 1/2" H
13-1/8” H
13-1/8” H
15-3/4” H
11-3/8”
Photocontrol is 120-277 volt and warranted for 6 years.
10 1/2"
10 1/2" 10 1/2"10 1/2"
10101/2"
1/2"
10 1/2" 10 1/2"10 1/2"
10 1/2"
Warranty
15 3/4"15 3/4"
15 3/4"
15 3/4"
15 3/4" 15 3/4" 15 3/4"
13 1/8"
13 1/8" 15 3/4"15 3/4"
13 1/8" 13 1/8" 13 1/8"
13 1/8"13 1/8"
13 1/8"13 1/8"13 1/8" 13 1/8" 13 1/8"
Five-year limited warranty. See product and 15
finish
warranty
3/4"
15 3/4"
15 3/4"15 3/4"
guide for details.
Finish
Refer to website for details.
1
2015
990990
990
15 3/4"
13 1/8"
13 1/8" 13 1/8"13 1/8"
15 3/4" 15 3/4" 15 3/4"
11 3/8"
11 3/8"11 3/8"
15 3/4"
15 3/4" 15 3/4"15 3/4"
13 1/8"
990990 990990
990 or 990T*
990
991991
Fits
3” OD
x 3” tall
tenon/pole
994 or 994T*
Fits 4” OD
x 3” tall
tenon/pole
991 or 991T*
992 or 992T*
x 3” tall
tenon/pole
x 3” tall
tenon/pole
991
991
992992Fits
992
Fits
3” OD 991
3” 992
OD
3 1/4" 3 1/4"
15 3/4"
11 3/8"
11 3/8" 11 3/8"11 3/8"
*Twist Lock Acorn (Fitter TL)
993 or 993T*
992
993
993
993993
Fits
3” OD
x 3” tall
tenon/pole
995 or 995T*
Fits 4” OD
x 3” tall
tenon/pole
10” W
3-1/4” H
10 1/2"
10 1/2" 10 1/2"10 1/2" 10"10 1/2"
10"
10"
11 3/8" 11 3/8" 11 3/8"
HSS HOUSE
SIDE
SHIELD
991992992991 991992
993OLFOLF
990 990 990
991 993993992 992 992
993 993OLF
993
991991
OLFOLF
13131/8"
1/8"
13 1/8" 13 1/8"13 1/8"
10 1/2" 10 1/2" 10 1/2"
3 1/4"
11 3/8"
10"
3 1/4"
10" 10"
3 1/4" 3 1/4"
10"
10"
10"
OLFOLF
OLF
OLF
OLF
OLF
3 1/4"3 1/4" 3 1/4" 3 1/4"
3 1/4"
OL3 or OL3T*
C2097 or
OLF
OLF
OLF
OLF
993
Fits
3”OLF
OD OLFOLF
C2097T*
x 3” tall
Fits 7” OD
tenon/pole
x 1” tall
OL4 or OL4T*
tenon/pole
Fits 4” OD
x 3” tall
tenon/pole
OLFOLF
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
info@sternberglighting.com
www.sternberglighting.com
3/15 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.