Price List 2016 - FOAMGLAS® Pittsburgh Corning

Transcription

Price List 2016
BUILDING, January 2016
Pittsburgh Corning UK Ltd (Building)
www.foamglas.co.uk
FOAMGLAS® PERINSUL HL
FOAMGLAS® Slabs
FOAMGLAS® Blocks
FOAMGLAS® Tapered Slabs and Blocks
FOAMGLAS® Boards
FOAMGLAS® PERISAVE
FOAMGLAS® Accessories
Index
3
SLABS
- FOAMGLAS® Slabs
- FOAMGLAS® READY BLOCK
- FOAMGLAS® ROOF BLOCK
4
8
11
- FOAMGLAS® Tapered Slabs
- FOAMGLAS® Tapered READY BLOCK
- FOAMGLAS® Tapered ROOF BLOCK
14
15
16
BOARDS
- FOAMGLAS®
- FOAMGLAS®
- FOAMGLAS®
- FOAMGLAS®
17
18
21
22
WALL BOARD
FLOOR BOARD
READY BOARD
ROOF BOARD G2
FOAMGLAS® PERISAVE
23
FOAMGLAS® Accessories
24
Frequently Asked Questions & Further Information
32
General Terms & Conditions of Sale
34
FOAMGLAS® Building, Net prices, excluding V.A.T., 2016
Compressive strength at breakpoint
2.9 N/mm2
Applications: To ensure continuity of the insulation system by eliminating thermal bridging at structural junctions.
Technical Data, see European Technical Approval (ETA) and Product Profile literature.
FOAMGLAS® is easily cut or trimmed with a hand saw blade.
Article number
Thickness x Width x Length
Thickness = Height
mm
65
65
65
100
100
100
140
140
x
x
x
x
x
x
x
x
100
140
215
100
140
215
140
215
x
x
x
x
x
x
x
x
Pieces per pack
Linear m per pack
Gross kg per pack
pcs / pack
m / pack
kg / pack
25
17
12
15
10
7
6
5
11.25
7.65
5.40
6.75
4.50
3.15
2.70
2.25
13.5
12.9
15.0
12.5
11.7
18.0
12.0
15.0
450
450
450
450
450
450
450
450
Price £ per pack *
Price / pack
£
£
£
£
£
£
£
£
109.83
104.59
113.42
101.47
94.84
101.73
79.67
101.96
Typical applications include:
Perimeter Insulation to prevent thermal (cold) bridging between structural elements of the Building: example, between
concrete structure and brick or block wall, timber wall, door threshold etc.
PERINSUL sizes suit popular brick and block dimensions.
Use PERINSUL HL DPC may be located above or below the Perinsul HL. Lay PERINSUL into an even bed of wet mortar;
butt the PERINSUL up dry end to end. Lay a bed of mortar over the PERINSUL and commence with construction of the wall.
For further information on PERINSUL HL see: Constructive Details http://www.constructivedetails.co.uk/
Building Information Modelling, BIM http://www.nationalbimlibrary.com/foamglas/foamglas-perinsul-hl
BBA Certificate Contact info@foamglas.co.uk for further information.
Weights are net and for guidance only. Pallet: ± 10 kg. Pallet dimensions approx. 1200 mm x 1000 mm x 1450 mm.
65 mm x 100 mm x 450 mm: 21 packs / pallet
FOAMGLAS® PERINSUL HL Delivery Charges
Pack Quantity
England & Wales
Delivery Charges
1
2
3
4
5
6 - 19
19 - 20
Over 21
£
£
£
£
£
£
£
20.59
30.77
41.38
51.98
58.35
68.96
79.57
Delivery free of charge
Scotland
Delivery Charges
£
£
£
£
£
£
£
41.38
51.98
62.59
73.20
79.57
90.18
100.79
Delivery free of charge
Delivery: Contact FOAMGLAS®, Pittsburgh Corning UK,
Tel 020 7492 1731 or info@foamglas.co.uk
*
See: Order Value, Delivery, Conditions of Sale, page 34.
3
FOAMGLAS® Slabs
FOAMGLAS® W+F
Thermal conductivity:
D
= 0.038 W / mK
≤ 100 kg / m3
Density:
Technical Data, see TDS or Product Profile literature.
Applications: Façades, External and Internal Walls, Cavity Walls, Soffits.
FOAMGLAS® with adhesive sealed joints provides an insulation system and vapour barrier.
Article number
Thickness, dimensions *
Slabs
per
pack
Material
only
Price £ per pack **
Price £ per m2
mm
W+F
W+F
W+F
W+F
W+F
W+F
W+F
W+F
W+F
W+F
W+F
W+F
05001
06001
07001
08001
09001
10001
11001
12001
13001
14001
15001
16001
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
10
8
7
6
6
5
5
4
4
4
3
3
kg / m2
Gross kg
per pack
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
14.0
13.5
13.7
13.5
15.1
14.0
15.4
13.5
14.5
15.6
12.7
13.5
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
18.97
22.77
26.56
30.35
34.15
37.94
41.74
45.53
49.33
53.12
56.91
60.71
2.70
2.16
1.89
1.62
1.62
1.35
1.35
1.08
1.08
1.08
0.81
0.81
Delivery: Contact FOAMGLAS®, Pittsburgh Corning UK, Tel 020 7492 1731 or info@foamglas.co.uk
Weights are net and for guidance only. Pallet: ± 10 kg. 12 packs / pallet. Pallet dimensions approx. 1200 mm x 1100 mm x 1450 mm.
*
**
For thickness over 160 mm install as 2 layers, minimum 80 mm per layer.
4
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
51.22
49.18
50.20
49.17
55.32
51.22
56.35
49.17
53.28
57.37
46.10
49.18
FOAMGLAS® Slabs
FOAMGLAS® T4+
D
Density:
= 0.041 W / mK
~ 115 kg / m3
Applications: Flat and Tapered Roofs.
If required, FOAMGLAS® can be installed in 2 or more layers.
Article number
Slabs
per
pack
Material
only
Price £ per m2
mm
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
T4+
04001
05001
06001
07001
08001
09001
10001
11001
12001
13001
14001
15001
16001
17001
18001
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
12
10
8
7
6
6
5
5
4
4
4
3
3
3
3
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
15.4
16.0
15.4
15.7
15.4
17.3
16.0
17.6
15.4
16.6
17.9
14.5
15.4
16.3
17.3
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
15.18
18.97
22.77
26.56
30.35
34.15
37.94
41.74
45.53
49.33
53.12
56.91
60.71
64.50
68.30
3.24
2.70
2.16
1.89
1.62
1.62
1.35
1.35
1.08
1.08
1.08
0.81
0.81
0.81
0.81
*
**
5
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
49.18
51.22
49.18
50.20
49.17
55.32
51.22
56.35
49.17
53.28
57.37
46.10
49.18
52.25
55.32
FOAMGLAS® Slabs
FOAMGLAS® S3
D
= 0.045 W / mK
~ 135 kg / m3
Density:
Applications: Flat and Tapered Roofs, which require insulation with a higher compressive strength.
Article number
Slabs
per
pack
Material
only
Price £ per m2
mm
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
S3
04001
05001
06001
07001
08001
09001
10001
11001
12001
13001
14001
15001
16001
17001
18001
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
12
10
8
7
6
6
5
5
4
4
4
3
3
3
3
kg / m2
Gross kg
per pack
5.2
6.5
7.8
9.1
10.4
11.7
13.0
14.3
15.6
16.9
18.2
19.5
20.8
22.1
23.4
17.3
18.1
17.3
17.7
17.3
19.5
18.1
19.8
17.3
18.8
20.2
16.3
17.3
18.4
19.5
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
3.24
2.70
2.16
1.89
1.62
1.62
1.35
1.35
1.08
1.08
1.08
0.81
0.81
0.81
0.81
53.33
55.54
53.33
54.43
53.31
59.99
55.54
61.10
53.32
57.77
62.21
49.99
53.32
56.65
59.99
16.46
20.57
24.69
28.80
32.91
37.03
41.14
45.26
49.37
53.49
57.60
61.71
65.83
69.94
74.06
*
**
6
FOAMGLAS® Slabs
FOAMGLAS® F
D
= 0.050 W / mK
~ 165 kg / m3
Density:
Applications: Flat and Tapered Roofs, which require insulation with the highest compressive strength.
Article number
Slabs
per
pack
Material
only
Price £ per m2
mm
F
F
F
F
F
F
F
F
F
F
F
F
F
04001
05001
06001
07001
08001
09001
10001
11001
12001
13001
14001
15001
16001
40
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
12
10
8
7
6
6
5
5
4
4
4
3
3
kg / m2
Gross kg
per pack
6.6
8.3
9.9
11.6
13.2
14.9
16.5
18.2
19.8
21.5
23.1
24.7
26.4
21.9
22.8
21.9
22.3
21.9
24.6
22.8
25.0
21.9
23.7
25.4
20.5
21.9
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
3.24
2.70
2.16
1.89
1.62
1.62
1.35
1.35
1.08
1.08
1.08
0.81
0.81
65.61
68.34
65.62
66.98
65.61
73.82
68.35
75.18
65.61
71.09
76.55
61.51
65.62
20.25
25.31
30.38
35.44
40.50
45.57
50.63
55.69
60.75
65.82
70.88
75.94
81.01
*
**
7
FOAMGLAS® READY BLOCK
FOAMGLAS® READY BLOCK T4+
D
= 0.041 W / mK
~ 115 kg / m3
Density:
Applications: For Flat and Tapered Roofs.
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab T4+.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RDBLT4+ 04026
RDBLT4+ 05026
RDBLT4+ 06026
RDBLT4+ 07026
RDBLT4+ 08026
RDBLT4+ 09026
RDBLT4+ 10026
RDBLT4+ 11026
RDBLT4+ 12026
RDBLT4+ 13026
RDBLT4+ 14026
RDBLT4+ 15026
RDBLT4+ 16026
RDBLT4+ 17026
RDBLT4+ 18026
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
1.4
1.8
2.1
2.4
2.7
3.0
3.3
3.6
3.9
4.2
4.6
4.9
5.2
5.5
5.8
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 4.43
£ 5.54
£ 6.65
£ 7.75
£ 8.86
£ 9.97
£ 11.08
£ 12.19
£ 13.29
£ 14.40
£ 15.51
£ 16.62
£ 17.73
£ 18.83
£ 19.94
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
69.75
73.85
32 packs / pallet.
*
**
8
FOAMGLAS® READY BLOCK S3
D
= 0.045 W / mK
~ 135 kg / m3
Density:
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab S3.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
RDBLS3
04026
05026
06026
07026
08026
09026
10026
11026
12026
13026
14026
15026
16026
17026
18026
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
1.6
2.0
2.3
2.7
3.0
3.4
3.7
4.1
4.4
4.8
5.1
5.5
5.8
6.2
6.5
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 4.78
£ 5.97
£ 7.17
£ 8.36
£ 9.55
£ 10.75
£ 11.94
£ 13.14
£ 14.33
£ 15.53
£ 16.72
£ 17.91
£ 19.11
£ 20.30
£ 21.49
17.69
22.11
26.54
30.96
35.38
39.81
44.23
48.65
53.07
57.50
61.92
66.34
70.77
75.19
79.61
32 packs / pallet.
*
**
9
FOAMGLAS® READY BLOCK F
D
= 0.050 W / mK
~ 165 kg / m3
Density:
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab F.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
RDBLF
04026
05026
06026
07026
08026
09026
10026
11026
12026
13026
14026
15026
16026
40
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
2.0
2.4
2.9
3.3
3.8
4.2
4.7
5.1
5.6
6.0
6.4
6.9
7.3
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 5.80
£ 7.25
£ 8.70
£ 10.15
£ 11.60
£ 13.05
£ 14.50
£ 15.95
£ 17.40
£ 18.85
£ 20.30
£ 21.75
£ 23.20
21.49
26.86
32.23
37.60
42.97
48.34
53.71
59.09
64.46
69.83
75.20
80.57
85.94
32 packs / pallet.
*
**
10
FOAMGLAS® ROOF BLOCK
FOAMGLAS® ROOF BLOCK G1 T4+
D
= 0.041 W / mK
~ 115 kg / m3
Density:
Technical Data, see TDS.
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab T4+.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RBLG1T4+ 04026
RBLG1T4+ 05026
RBLG1T4+ 06026
RBLG1T4+ 07026
RBLG1T4+ 08026
RBLG1T4+ 09026
RBLG1T4+ 10026
RBLG1T4+ 11026
RBLG1T4+ 12026
RBLG1T4+ 13026
RBLG1T4+ 14026
RBLG1T4+ 15026
RBLG1T4+ 16026
RBLG1T4+ 17026
RBLG1T4+ 18026
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
1.4
1.8
2.1
2.4
2.7
3.0
3.3
3.6
3.9
4.2
4.6
4.9
5.2
5.5
5.8
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 4.43
£ 5.54
£ 6.65
£ 7.75
£ 8.86
£ 9.97
£ 11.08
£ 12.19
£ 13.29
£ 14.40
£ 15.51
£ 16.62
£ 17.73
£ 18.83
£ 19.94
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
69.75
73.85
32 packs / pallet.
Price of FOAMGLAS® ROOF BLOCK G1 T4+ is the same price as FOAMGLAS® READY BLOCK T4+
*
**
11
FOAMGLAS® ROOF BLOCK G1 S3
D
= 0.045 W / mK
~ 135 kg / m3
Density:
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab S3.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
RBLG1S3
04026
05026
06026
07026
08026
09026
10026
11026
12026
13026
14026
15026
16026
17026
18026
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
1.6
2.0
2.3
2.7
3.0
3.4
3.7
4.1
4.4
4.8
5.1
5.5
5.8
6.2
6.5
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 4.78
£ 5.97
£ 7.17
£ 8.36
£ 9.55
£ 10.75
£ 11.94
£ 13.14
£ 14.33
£ 15.53
£ 16.72
£ 17.91
£ 19.11
£ 20.30
£ 21.49
17.69
22.11
26.54
30.96
35.38
39.81
44.23
48.65
53.07
57.50
61.92
66.34
70.77
75.19
79.61
32 packs / pallet.
Price of FOAMGLAS® ROOF BLOCK S3 is the same price as FOAMGLAS® READY BLOCK S3
*
**
12
FOAMGLAS® ROOF BLOCK G1 F
D
= 0.050 W / mK
~ 165 kg / m3
Density:
If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab F.
Article number
Blocks
per
pack
Material
only
Price £ per m2
mm
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBLG1F
RBG1LF
RBLG1F
RBLG1F
RBLG1F
04026
05026
06026
07026
08026
09026
10026
11026
12026
13026
14026
15026
16026
40
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
x
x
x
x
x
x
x
x
x
x
x
x
x
450
450
450
450
450
450
450
450
450
450
450
450
450
1
1
1
1
1
1
1
1
1
1
1
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
2.0
2.4
2.9
3.3
3.8
4.2
4.7
5.1
5.6
6.0
6.4
6.9
7.3
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
0.27
£ 5.80
£ 7.25
£ 8.70
£ 10.15
£ 11.60
£ 13.05
£ 14.50
£ 15.95
£ 17.40
£ 18.85
£ 20.30
£ 21.75
£ 23.20
21.49
26.86
32.23
37.60
42.97
48.34
53.71
59.09
64.46
69.83
75.20
80.57
85.94
32 packs / pallet.
Price of FOAMGLAS® ROOF BLOCK F is the same price as FOAMGLAS® READY BLOCK F
*
**
13
TAPERED INSULATION FOAMGLAS®
FOAMGLAS® Tapered Slab
Tapered insulation FOAMGLAS® Type – Slab T4+
D = 0.041 W / mK
Density:
~ 115 kg / m 3
Tapered insulation FOAMGLAS® Type – Slab S3
D = 0.045 W / mK
Density:
~ 135 kg / m 3
Tapered insulation FOAMGLAS® Type – Slab F
D = 0.050 W / mK
Density:
~ 165 kg / m 3
Factory produced with a Tapered thickness as below:
% Slope:
0.55%
1.1%
1.25%
1.7%
Gradient:
1:180
1:90
1:80
1:60
Angle:
0.32
0.64
0.72
0.96
2.2%
1:45
1.27
3.3%
1:30
1.91
4.4%
1:22.5
2.55
Applications: Tapered Insulation System for Roofs, Balconies, Terraces, Walkways,
Vehicle Roadway & Parking.
Contact FOAMGLAS UK for further information regarding pricing**.
Contact FOAMGLAS UK for the Tapered Insulation Design Service.
*
**
For thickness over 180 mm install as 2 layers. Base layer is Slab T4+.
14
5.5%
1.18
3.18
6.7%
1:15
3.81
FOAMGLAS® Tapered READY BLOCK T4+
Tapered insulation FOAMGLAS® Type – READY BLOCK T4+
Density:
D = 0.041 W / mK
~ 115 kg / m 3
Factory produced with a Tapered thickness* as below:
% Slope:
0.55%
Gradient:
1:180
Angle:
0.32
1.1%
1:90
0.64
1.25%
1:80
0.72
1.7%
1:60
0.96
2.2%
1:45
1.27
3.3%
1:30
1.91
4.4%
1:22.5
2.55
5.5%
1.18
3.18
6.7%
1:15
3.81
Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS® READY BLOCK. READY BLOCK is cold bonded with PC® adhesive to substructures.
Membranes can be torched directly onto the upper surface of the READY BLOCK.
FOAMGLAS® with adhesive sealed joints provides an insulation system and vapour barrier. FOAMGLAS® is easily cut or trimmed with a hand saw blade.
FOAMGLAS® Tapered READY BLOCK S3
Tapered insulation FOAMGLAS® Type – READY BLOCK S3
Density:
D = 0.045 W / mK
~ 135 kg / m 3
% Slope:
0.55%
Gradient:
1:180
Angle:
0.32
1.1%
1:90
0.64
1.25%
1:80
0.72
1.7%
1:60
0.96
2.2%
1:45
1.27
3.3%
1:30
1.91
4.4%
1:22.5
2.55
5.5%
1.18
3.18
6.7%
1:15
3.81
FOAMGLAS® Tapered READY BLOCK F
Tapered insulation FOAMGLAS® Type – READY BLOCK F
Density:
D = 0.050 W / mK
~ 165 kg / m 3
% Slope:
0.55%
Gradient:
1:180
Angle:
0.32
1.1%
1:90
0.64
1.25%
1:80
0.72
1.7%
1:60
0.96
2.2%
1:45
1.27
3.3%
1:30
1.91
4.4%
1:22.5
2.55
5.5%
1.18
3.18
6.7%
1:15
3.81
Contact FOAMGLAS UK for further information regarding pricing**.
Contact FOAMGLAS UK for the Tapered Insulation Design Service.
*
**
For thickness over 180 mm install as 2 layers. Base layer is Slab T4+.
15
FOAMGLAS® Tapered ROOF BLOCK G1 T4+
Tapered insulation FOAMGLAS® Type – ROOF BLOCK G1 T4+
Density:
D = 0.041 W / mK
~ 115 kg / m 3
% Slope:
0.55%
Gradient:
1:180
Angle:
0.32
1.1%
1:90
0.64
1.25%
1:80
0.72
1.7%
1:60
0.96
2.2%
1:45
1.27
3.3%
1:30
1.91
4.4%
1:22.5
2.55
5.5%
1.18
3.18
6.7%
1:15
3.81
Applications: Flat Roofs, Tapered Insulation System, FOAMGLAS® Tapered ROOF BLOCK G1 T4+. ROOF BLOCK is cold bonded with PC® adhesive to
substructures. If required, FOAMGLAS® can be installed in 2 or more layers, for base layer use Slab T4+.
*
**
16
FOAMGLAS® Boards
FOAMGLAS® WALL BOARD W+F
D
= 0.038 W / mK
≤ 100 kg / m3
Density:
Technical Data, see pages 30-31 or Product Profile literature.
Applications: Façades, Walls and Soffits Internal and External, Walls Above and Below Ground.
Article Number
per
Boards Material
only
pack
Price £ per m2
mm
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
WBW+F
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
40
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
2
2
2
2
2
2
kg / m2
Gross kg
per pack
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
23.8
23.5
21.9
24.8
20.9
23.1
25.3
18.5
20.0
21.4
22.9
24.3
25.8
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
40 mm to 90 mm thickness: 8 packs / pallet.
100 mm and 160 mm thickness: 6 packs / pallet.
*
**
17
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
£
70.89
73.84
70.91
82.71
70.89
79.77
88.62
64.99
70.89
76.81
82.71
88.62
94.54
FOAMGLAS® Boards
FOAMGLAS® FLOOR BOARD T4+
D
= 0.041 W / mK
~ 115 kg / m3
Density
Applications: Typically used internally or externally, above or below the floor structure.
Article number
Boards
per
pack
Material
only
Price £ per m2
mm
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
FBT4+
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
17020
18020
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
2
2
2
2
2
2
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
26.4
26.2
24.5
27.8
23.5
26.0
28.5
20.9
22.6
24.2
25.9
27.6
29.2
15.1
15.9
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
69.75
73.85
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
0.72
0.72
40 mm to
90 mm thickness: 8 packs / pallet
100 mm and 160 mm thickness: 6 packs / pallet
*
**
18
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
70.89
73.84
70.91
82.71
70.89
79.77
88.62
64.99
70.89
76.81
82.71
88.62
94.54
50.22
53.17
FOAMGLAS® Boards
FOAMGLAS® FLOOR BOARD S3
D
= 0.045 W / mK
~ 135 kg / m3
Density
Applications: Insulation with higher compressive strength. Typically used internally or externally,
above or below the floor structure.
Article number
Boards
per
pack
Material
only
Price £ per m2
mm
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
FBS3
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
17020
18020
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
3
2
2
2
2
2
1
1
kg / m2
Gross kg
per pack
5.2
6.5
7.8
9.1
10.4
11.7
13.0
14.3
15.6
16.9
18.2
19.5
20.8
22.1
23.4
30.0
31.0
28.0
31.0
27.0
29.0
32.0
23.0
26.0
28.0
30.0
32.0
34.0
18.1
18.7
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
0.72
0.72
£ 78.02
£ 81.25
£ 78.02
£ 91.01
£ 78.00
£ 87.76
£ 97.50
£ 71.51
£ 78.00
£ 84.51
£ 91.01
£ 97.50
£ 104.01
£ 55.25
£ 58.51
18.06
22.57
27.09
31.60
36.11
40.63
45.14
49.66
54.17
58.69
63.20
67.71
72.23
76.74
81.26
40 mm to
*
**
19
FOAMGLAS® Boards
FOAMGLAS® FLOOR BOARD F
D
= 0.050 W / mK
~ 165 kg / m3
Density
Applications: Insulation with the highest compressive strength. Typically used internally or externally,
above or below the floor structure.
Article number
Boards
per
pack
Material
only
Price £ per m2
mm
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
FBF
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
40
50
60
70
80
90
100
110
120
130
140
150
160
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
2
2
2
2
2
2
kg / m2
Gross kg
per pack
6.6
8.3
9.9
11.6
13.2
14.9
16.5
18.2
19.8
21.5
23.1
24.8
26.4
35.0
35.2
33.1
37.9
32.2
35.7
39.3
28.8
31.2
33.6
36.0
38.4
40.7
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
Price / pack
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
£ 94.39
£ 98.32
£ 94.41
£ 110.13
£ 94.39
£ 106.21
£ 118.00
£ 86.53
£ 94.39
£ 102.27
£ 110.13
£ 117.99
£ 125.87
21.85
27.31
32.78
38.24
43.70
49.17
54.63
60.09
65.55
71.02
76.48
81.94
87.41
40 mm to
*
**
20
FOAMGLAS® Boards
FOAMGLAS® READY BOARD T4+
D
= 0.041 W / mK
~ 115 kg / m3
Density
Applications: Flat Roofs, Pitched and Metal Roofs, External Walls below ground.
Torch on membranes can be applied directly to the upper surface of the READY BOARD.
Article number
Boards
per
pack
Material
only
Price £ per m2
mm
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
RDBT4+
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
17020
18020
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
2
2
2
2
2
2
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
26.4
26.2
24.5
27.8
23.5
26.0
28.5
20.9
22.6
24.2
25.9
27.6
29.2
15.1
15.9
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
69.75
73.85
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
0.72
0.72
READY BOARD T4+ has a fleece lower side and a bitumen upper side.
Where two or more layers are required, use FOAMGLAS® ROOF BOARD G2 T4+ as the base layer.
40 mm to
*
**
21
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
70.89
73.84
70.91
82.71
70.89
79.77
88.62
64.99
70.89
76.81
82.71
88.62
94.54
50.22
53.17
FOAMGLAS® Boards
FOAMGLAS® ROOF BOARD G2 T4+
D
= 0.041 W / mK
~ 115 kg / m3
Density
Applications: Typically for Roofs, and as a Base Layer for READY BOARD T4+, and ROOF BOARD G2 T4+.
Article number
Boards
per
pack
Material
only
Price £ per m2
mm
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
RBG2T4+
04020
05020
06020
07020
08020
09020
10020
11020
12020
13020
14020
15020
16020
17020
18020
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
6
5
4
4
3
3
3
2
2
2
2
2
2
1
1
kg / m2
Gross kg
per pack
4.6
5.8
6.9
8.1
9.2
10.4
11.5
12.7
13.8
15.0
16.1
17.3
18.4
19.6
20.7
26.4
26.2
24.5
27.8
23.5
26.0
28.5
20.9
22.6
24.2
25.9
27.6
29.2
15.1
15.9
Price / m2
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
m2 / pack
16.41
20.51
24.62
28.72
32.82
36.93
41.03
45.13
49.23
53.34
57.44
61.54
65.65
69.75
73.85
4.32
3.60
2.88
2.88
2.16
2.16
2.16
1.44
1.44
1.44
1.44
1.44
1.44
0.72
0.72
FOAMGLAS ROOF BOARD G2 T4+ has fleece on both sides.
Where two or more layers are required, use FOAMGLAS® ROOF BOARD G2 T4+ as the base layer.
40 mm to
*
**
For thickness over 180 mm install as 2 layers, minimum 90 mm per layer. For base layer use FOAMGLAS® ROOF BOARD G2 T4+.
22
Price / pack
£
£
£
£
£
£
£
£
£
£
£
£
£
£
£
70.89
73.84
70.91
82.71
70.89
79.77
88.62
64.99
70.89
76.81
82.71
88.62
94.54
50.22
53.17
Special products
PC® PERISAVE Base Block
D
≤ 0.038 W/(m·K)
Density:
100 kg/m3
Compressive strength (EN 826, Annex A)
≥ 400 Kpa
Technical Data, see Product Profile literature.
Applications: Universal base block; meets passive house requirements.
System element which meets passive house insulation requirements.
Article number
piece*
Dimensions
Thickness x width
PERISS 28001
length
Price £ per
mm
mm
Each
280 x 450
600
£ 143.64
PC® PERISAVE Marginal Stop
D
≤ 0.038 W/(m·K)
Density:
100 kg/m3
Compressive strength (EN 826, Annex A)
≥ 400 Kpa
Technical Data, see Product Profile literature.
15
Applications: Marginal stop, insulation and formwork for concrete floor slabs.
System element which meets passive house insulation requirements.
Article number
Dimensions
thickness x width
PERISMS 2502
PERISMS 3002
Price £ per piece *
mm
mm
Each
250 x 300
300 x 300
600
600
£ 41.91
£ 44.34
15
length
*
15
23
FOAMGLAS® Accessory Prices
Primer / Adhesives
PC® EM – Primer
Type: Viscous, solvent-free bitumen emulsion.
Application: Primer coat to improve adhesion on absorbing substructures as concrete, brickwalls and plaster.
Consistency: Liquid
Colour: Black
Solvents: None
Mixing ratio: Used as a primer in cold bitumen applications.
Dilute the product 1 : 10 (by volume) with water, (1 part PC® EM,
10 parts of water). The base surface should be free of dust and form oil (release agents).
PC® EM can be applied to a dry or wet surface.
Working temperature (air + base surface) : +5 °C
Drying time: App. 3 to 12 hours depending on temperature and humidity.
Storage*: Maximum 1 year. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure.
Consumption: About 300 g/m2 finished mixture.
Article number
PC 0004
Packing unit, pail
Units per pallet; pallet size: 120 x 80 cm
5 kg
96 pails
Price
£ / unit
£ 12.46
PC® 56
Type: Two-component adhesive, hydraulic binding.
Application: Bonding of FOAMGLAS® slabs / boards to absorbent surfaces. Adhesion of FOAMGLAS® slabs to each
other. Surfacer.
Consistency: Pasty
Colour: Black-brown
Solvents: None
Mixing ration: Fluid / Powder 3 : 1 by weight. The batch supplies the correct proportional quantities of the two
components which should be stirred with a power drill and a mixing paddle to a homogeneous adhesive compound
until smooth.
Working temperature (air + base surface) : +5 °C to +35 °C
Installation: The base surface should be clean and free of dust, it can be dry or wet. The adhesive is applied to the
FOAMGLAS® elements to be bonded using a notched trowel (depth of notches 8 - 10 mm).
Working time: At +20 °C about 90 minutes
Curing time: Several days (1 – 3 days, depending on temperature, humidity and base surface).
Storage*: See label for expiration date. Store dry in well-closed containers. Protect against frost, heat and direct
sun exposure.
Consumption: Complete bonding with filled joints, about 3.5 – 4.5 kg/m2 depending on base surface.
Surfacer, about 1.5 kg/m2
Article number
PC 0056
Packing unit, Combi-pail
28 kg
18 pails
Price
£ / unit
£ 55.11
PC® 88
Type: Two-component adhesive.
Application: Bonding of FOAMGLAS® slabs / boards on to absorbent and non-absorbent surfaces.
Adhesion of FOAMGLAS® slabs to each other.
Consistency: Pasty
Colour: Black
Solvents: Little
Mixing ration: 1 tin per pail
Working temperature (air + base surface) : +5 °C to +35 °C
Installation: The base surface should be clean and free of dust, it must be dry. The adhesive is applied to the
FOAMGLAS® elements to be bonded using a notched trowel (depth of notches 8 - 10 mm).
Working time: At +25 °C 2 to 2½ hours
Curing time: Several days (1 – 3 days, depending on temperature, humidity and base surface).
sun exposure.
Consumption: Complete bonding with filled joints, about 3.5 – 4.5 kg/m2 depending on base surface.
Article number
PC 0062 + 0063
PC 0188 + 0065
Packing unit, Component 1 + 2
Price
16.2 kg (15.1 l) Comp. 1 + 2 36 pails + tins
8.2 kg (7.6 l) Comp. 1 + 2 48 pails + tins
£ / unit
£ 139.56
£ 75.14
* In closed original pail.
Accessory components are fully compatible with FOAMGLAS® material and systems. It is highly recommended to use them in connection with FOAMGLAS®
insulation to avoid damage.
Due to dependence on suppliers and exchange rates price adjustments during the year for Accessories remain reserved on date of shipment.
24
Adhesives
PC® 58
Type: Two-component adhesive, hydraulic binding
Application: Bonding of FOAMGLAS® slabs / boards to absorbent surfaces. Surfacer.
Consistency: Pasty
Colour: Black-brown
Solvents: None
Working temperature (air + base surface): +5 °C to +35 °C
Mixing ratio: 24 kg black component + 8 kg powder component (batch supplies the correct proportional quantities)
Installation: The base surface should be clean, dry and free of dust and oil.
Working time: At 20 °C: about 90 minutes
Curing time: 1 to 3 days
sun exposure.
Consumption: Complete bonding, about 5.0 to 7.0 kg/m2. Surfacer about 2.0 kg/m2.
Article number
PC 0058
Packing unit, Combi-pail
32 kg
18 pails
Price
£ / unit
£ 68.13
PC® 11
Type: Single-component adhesive
Application: Bonding of FOAMGLAS® slabs / boards on steel deck using a special extrusion pump applicator.
Consistency: Pasty
Colour: Black
Solvents: Few
Working temperature (air + base surface): +5 °C to +40 °C.
Installation: PC® 11 is a ready for use, solvent-containing and permanently elastic, non-ageing adhesive to be
applied on to a clean base surface. Position and alignement of the bonded insulation slabs can be corrected within
5 minutes.
Working time: –
Drying time: Several days
sun exposure.
Consumption: 8 adhesive strips per meter: about 1.0 kg/m2 (700 g/m2 surface; 300 g/m2 butt joint).
Note: A compressor powered, air operated Pump for PC® 11 can be purchased, or rented (deposit payable),
see Price List item Tools, PC 0160, page 27.
Article number
PC 0046
PC 0047
Packing unit, pail
28 kg
3 kg sausage
22 pails
8 pieces
Price
£ / unit
£ 107.78
£ 13.07
PC® 500
Type: Single-component adhesive
Application: Bonding of FOAMGLAS® slabs / boards to absorbent surfaces.
Consistency: Pasty
Colour: Black-brown
Solvents: Few (< 6%)
Working temperature (air + base surface): +5 °C to + 40°C
Installation: The base surface should be clean, dry and free of dust and oil. Surfaces contaminated with form oil
(release agents) should be cleaned prior to application. A primer, for example PC® EM, is to be applied as a bonding
agent.
Working time: At + 20 °C, several days.
Drying time: Completely dry after several months. Touch dry: Several hours, rapid hardening due to
thixotropic behaviour of the adhesive (= time related decrease of viscosity).
Storage*: Maximum 1 year. Store dry in well-closed containers. Protect against frost, heat and direct sun exposure.
Keep away from open flames and sparks.
Consumption: Full, completely bonded with filled joints, about 5.0 to 7.0 kg/m2.
Bonding of waterproofing membrane, about 2.0 kg/m2. Surfacer, about 2.0 kg/m2.
Article number
PC 0059
*
Packing unit, pail
25 kg
22 pails
Price
In closed original pail.
£ / unit
£ 61.54
25
Coatings
PC® 74 A2
Type: Mineral coating composition
Application: Non-combutible coating to be reinforced by glass-fibre fabric PC® 150 on FOAMGLAS® slabs for the
insulation of raised access floors.
Consistency: Powdery
Colour: Light grey
Solvents: None
Working temperature (air + base surface): +5 ºC to +35 ºC
Mixing ration: 5 – 6 l water for 25 kg PC® 74 A2
Installation: The dry powder is mixed with water. PC® 74 A2 is trowel-applied to the dry, dust-free FOAMGLAS®
surface. Irregularities in the FOAMGLAS® layer need to be repaired. PC® 150 glass-fibre fabric is embedded with
10 cm overlapping and pressed in the wet PC® 74 A2 layer; a second coat of PC® 74 A2 is to cover the first.
The fabric lining is to be covered completely.
Working time: About 3 – 4 hours
Drying time: About 24 – 72 hours depending on building moisture. Completely cured after 72 hours (resistant).
Storage: See label for expiration date. Store cool and dry in well-closed original bags.
Consumption: About 3.5 kg/m2 (depending on work surface).
Article number
PC 0060
Packing unit, bag
25 kg
42 bags
Price
£ / unit
£ 28.17
PC® 164
Type: Thin-bed coating
Application: 1. PC® 164 basic coating is used with fabric PC® 150 on FOAMGLAS® slabs for ceilings and walls.
After sufficient curing the surface allows to be covered, for example with final rendering PC® 78.
2. For bonding of FOAMGLAS® W+F façade slabs to absorbent and non-absorbent surfaces. Attachment of
FOAMGLAS® slabs to each other. It is a ready-for-use product, based on a liquid polymer dispersion with mineral
extenders, sands and additives.
Consistency: Pasty
Colour: White .
Solvents: None
Working temperature (air + base surface): +5 °C to +25 °C
Installation: Coating: The base surface should be clean, free of dust and stable. The pasty coating is applied to
the FOAMGLAS® insulation using a stainless steel trowel or a notched trowel (depth of notches
min. 5 mm). Tools can be cleaned with water. For a basic coating PC® 164 is spread on the dust-free FOAMGLAS®
surface with a smoothing trowel and levelled.
Adhesive: The base surface should be clean, free of dust and stable. Start with stirring of PC® 164 and apply it to
one short and one long side of the FOAMGLAS® slabs (in stack) and to the entire surface of the FOAMGLAS® slab,
using a notched trowel (depth of notches 6 – 8 mm). The insuation slab is adhered to the wall by pushing it
diagonally into the open corner.
Working time: 15 - 20 minutes (surface). Drying time: About 3 to 5 days depending on building moisture
Storage*: See label for expiration date. Store cool and dry in well-closed container. Protect against frost, heat and
direct sun exposure.
Consumption: As a coating, about 3.5 kg/m2. Note: In swimming pools with high relative humidity the additional
application of a primer-sealer, for example PC® 130, on top of the basic coating PC® 164 is strongly recommended.
Article number
PC 0009
Packing unit, pail
25 kg
24 pails
Price
£ / unit
£ 62.84
PC® PITTCOTE® 404
Type: Highly elastic acrylic latex coating
Application:
Weather-resistant finish layer. Use with fabric lining PC® FABRIC 79P on FOAMGLAS® slabs.
Consistency: Pasty
Colour: Off-white or black
Solvents: None
Working temperature (air + base surface): At least + 5 °C
Installation: Coating: The base surface should be dry, clean and free of dust. PITTCOTE® 404 is a finish coat which
is spread with a stainless steel trowel on to a basic coating, embedding the reinforcement. Tools can be cleaned
with water. As a basic coating PC® 164 is trowel-applied to the dust-free FOAMGLAS® surface and smoothed.
Working time: About 3 to 4 hours.
Drying time: About 48 hours.
Storage*: See label for expiration date. Store cool and dry in well-closed containers. Protect against frost, heat
and direct sun exposure.
Consumption: About 2.5 to 3.5 kg/m2.
Article number
PC 0010 WHITE
PC 0011 BLACK
*
Packing unit, pail
25 kg
25 kg
24 pails
24 pails
Price
£ / unit
£ 191.43
£ 192.49
26
Coatings
PC® 140
Type: Thin-bed coating composition (processed fine filler based on synthetic dispersion as per DIN 55 945).
Area of application: PC® 140 is applied with a steel smoothing trowel onto the previously primed surface. Once
dry, the prepared surface can be wetted with moisture.
Consistency: Pasty
Colour: Natural white, matt
Solvents: None
Working temperature (air + base surface): + 5 ºC to + 35 ºC
Installation: Ready-to-use PC® 140 fine filler should be well stirred before application.
With a more fluid consistency the coating can be sprayed (add max. 5 – 10 % of water). When the surface begins to
dry, it can be smoothed by wetting with a soft cloth or sponge board or when fully dry, the surface may be
scrubbed or sanded.
Working time: 20 – 30 minutes
Drying time: App. 24 - 72 hours depending on building moisture. Touch-dry after 20 minutes to a few hours.
Storage: Maximum 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and direct
exposure to sunrays.
Consumption: As coating app. 1.5 kg/m2 per mm layer density.
Article number
PC 0087
Packing unit, pail
25 kg
24 pails
Price
£ / unit
£ 24.82
PC® 310
Type: Solvent-free bonding course.
Area of application: PC® 310 is a solvent-free, pigmented and quartz sand bonding course on synthetic resin
dispersion. It is used as a primary coat and bonding course for structural plaster on base plaster PC® 74 A2.
Consistency: Liquid
Colour: White, matt
Solvents: None
Working: PC® 310 should be well stirred before use and is applied undiluted by paint brush or by roll.
To modify the consistency up to 10 % of water can be added.
Working time: 20 – 30 minutes
Drying time: At + 20 ºC and 65 % relative humidity, app. 12 hours.
Storage: Maximum 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and direct
exposure to sunrays.
Consumption: App. 250 g/m2 (as primer).
Article number
PC 0088
Packing unit, pail
25 kg
24 pails
Price
£ / unit
£ 31.07
PC® 78
Type: Final rendering, grading 1.0 to 3.0 mm
Area of application: Final rendering (abrasion). Copolymer made of vinyl acetate, vinyl chloride and ethyl as well as
calcite sands and other auxiliary materials. With different finish treatments individual decorative structures can be
achieved. A PC® 164 basic coating, embedding PC® 150 fabric reinforcement, can be covered after sufficient curing
with PC® 78 final rendering.
Consistency: Pasty
Colour: Natural white
Solvents: None
Working temperature (air + base surface): + 5 °C to + 25 °C
Installation: The base surface should be dry, clean, free of dust, level and stable. PC® 78 is applied in a thin layer
with a stainless steel trowel and then smoothed by abrasion, vinyl etc.. Tools should be cleaned with water.
Working time: 15 - 20 minutes (surface)
Drying time: App. 24 - 72 hours depending on building moisture.
Storage: Maximum 6 months / 1 year. Store cool and dry in well-closed containers. Protect against frost, heat and
direct exposure to sunrays.
Consumption: Grading 1.0 mm: App. 1.0 – 1.5 kg/m2
Grading 1.5 mm: App. 1.7 – 2.2 kg/m2
Article number
PC
PC
PC
PC
*
0105
0144
0145
0094
Packing unit, pail
25
25
25
25
kg
kg
kg
kg
/
/
/
/
grading
grading
grading
grading
1.0
1.5
2.0
3.0
mm
mm
mm
mm
24
24
24
24
Price
pails
pails
pails
pails
£ / unit
£
£
£
£
27
41.45
39.91
65.43
70.06
Special products
PC® 600 Green – Adhesive
Type: Ready-to use single-component adhesive; anhydrous, thixotropic polymer glue, based on natural oils
Application: Bonding of FOAMGLAS® Slabs, Boards and Blocks to concrete and timber substrates and for the
sealing of FOAMGLAS® joints
Consistency: Pasty
Colour: Green
Solvents: None
Working temperature (air + base surface): +5 °C to + 40°C
Installation: The base surface should be clean, dry and free of dust and oil. Surfaces contaminated with form oil
(release agents) should be cleaned prior to application.
Working time: At + 20 °C, several days.
Drying time: Surface drying time is several hours; depth drying time is several days.
Storage*: Store dry in tightly closed containers. Protect against frost, heat and direct sun exposure. Keep away
from open flames and sparks.
Consumption: Full bonding with sealed joints, approximately 4.0 to 6.0 kg/m2.
Article number
PC 0197
Packing unit, pail
28 kg
27 pails
Price
£ / unit
£ 137.53
PC® 130 – Sealing Primer
Type: White-pigmented sealing primer based upon a saponification-resistant synthetic resin
Application: Used as a ready processed primer for PC® 164 and PC® 74 A2 prior to applying the render
Consistency: Liquid
Colour: White, mat
Working temperature (air + base surface): +5 °C to +30 °C.
Application: PC® 130 should be stirred with a power drill and is brush- or roll-applied undiluted.
Working time: 20 - 30 minutes
Drying: 2 – 4 hours dust dry at 20 °C and 50% r.h., after 15 hours ready for coating
Storage*: In cool and dry place. Protect against frost, heat, direct sun exposure.
Consumption: Approx. 250 ml/m2 ~ 400 g/m2 as a primer
Article number
PC 0155
Packing unit, pail
10 kg
24 pails
Price
10 kg
£ / unit
£ 180.94
PC® PITTSEAL® 444 N - Sealant
Type: Single-component sealing compound
Application: Sealing of penetrations and connections. Plastic and permanently elastic compound;
adheres to steel, concrete, wood, etc.
Consistency: Pasty
Colour: Solvents: Few
Working temperature (air and base surface): + 10 °C to + 25 °C
Application: The base surface should be dry, clean and free of dust.
FOAMGLAS® sealant for walls, floors and roofs, NOT for use on soffits / ceilings.
For the cartridges use a caulking gun.
Drying: No drying; skin formation in 1 to 3 hours.
Storage*: See label for expiration date. Store cool and dry in well-closed containers.
Protect against frost, heat and direct sun exposure. Keep away from open flames and sparks.
Consumption: About 0.25 kg/m.
Article number
PC 0003
*
Packing unit, cartridge
(12 cartrides per box)
310 ml cartridge
100 boxes / pallet
Price
£ / unit
£ 4.86
28
Tile cement, Fabric Reinforcement
PC® 160
Type: Highly flexible special tile cement.
Area of application: PC® 160 is a highly flexible special tile cement for fabric-reinforced coating on FOAMGLAS®
slabs as well as final tile bonding on the previously rendered surface. PC® 160 meets the requirements of
DIN EN 12 004 for hydraulic-setting thin-bed cement and dispersion adhesives. After curing the layer is waterproof
and frost-resistant; the material is sufficiently flexible to bridge eventual hair cracks in the base coat.
Consistency: Pasty / liquid
Colour: A: Light grey. B: White
Solvents: None
Mixing ration: Component A: Sand/cement, 6 parts per weight of cementatious powder and
component B: Liquid synthetic resin, 1 part per weight of elasticator
to be mixed for about 3 minutes using a power drill (electric mixer) with 300 revolutions per minute (rpm).
Cleaning: Immediate cleaning of tools with water.
Working time: App. 1 hour
Drying time: After app. 48 hours
Storage: Maximum 1 year (both components). Store cool and dry in original packaging.
Consumption: Depending on type of rendering base, texture properties and type of tool,
3 mm notches, app. 1.4 kg/m2
Note: DIN 18195-5 specifies that for walls and floors in wet areas damp-proofing/waterproofing has to be
provided. See technical bulletin of Fachverband Deutsches Fliesengewerbe (Professional Association of the German
Tile Industry), "Recommendations for damp-/waterproofing measures along with wall or floor tiling and panels for
interior or exterior use".
Article number
PC 0081
PC 0082
Packing unit, bag / pail
25 kg bag / component A
4.2 kg pail / component B
42 bags
TBA
Price
£ / unit
£ 38.95
£ 6.50
PC® 150 Glass fabric (FABRIC 79G2)
Type: Coarse-meshed glass fabric with styrene acrylic
Application: Open-mesh, alkali-resistant glass fabric for reinforcement of coating compositions on FOAMGLAS®
insulation. Working temperature: Min. 0 °C
Roll: 1 m wide, 50 m long
Weight: 165 g/m2
Surface: (m2 per roll) 50 m2
2
Meshes/dm : 500
Width of mesh: 3.6 x 3.4 mm Thread thickness: 0.4 mm.
Tensile strength: Longitudinal (warp): 42 N/mm
Tensile strength: Transverse (weft) 38 N/mm
Storage: At least 3 years. Store dry.
Article number
PC 0039
Roll
Surface
Rolls per pallet
1 m wide, 50 m long
50 m2
30
Price
£ / unit
£ 79.06
PC® FABRIC 79P
Type: Coarse-meshed polyester fabric
Application: Open-mesh, alkali-resistant polyester fabric for reinforcement of coating compositions on FOAMGLAS®
insulation. Working temperature: Min. 0 °C
Surface: (m2 per roll) 46 m2
Roll: 1 m wide, 46 m long
Weight: 90 g/m2
Meshes/dm2: 500
Width of mesh: 3.5 x 3.5 mm Thread thickness: 0.6 mm.
Tensile strength: Longitudinal (warp): 6.5 N/mm
Tensile strength: Transverse (weft) 5.3 N/mm
Storage: At least 3 years. Keep in cool, ventilated place.
Article number
PC 0037-79P
*
Roll
1 m wide, 45 m long
Surface
45 m2
Price
£ / unit
£ 170.13
29
Fixing Plates and Insulation Fixings
Roofing plates PC® SP 150/150
Article number
PC 0034, roofing plate
PC 0128 P, façade plate
PC 0123 P, façade plate
Dimensions, mm
Hole, mm
Packing unit,
box
Boxes per
pallet
150 x 150
150 x 150
150 x 150
None
10.2
14
50 pcs
50 pcs
50 pcs
40
40
40
Price
£ / box
£ 52.46
£ 68.88
£ 68.89
Weight per box approx 17 kg. Pallet dimensions approx. 1200 mm x 1000 mm x 1350 mm.
Roofing plates PC® SP 200/200
Approved by the relevant building supervisory approval Nr. Z-14.4-475
Upon request, other types of material for extra charge.
Article number
PC 0111, roofing plate
Dimensions, mm
Hole, mm
Packing unit, box
200 x 200
None
100 pcs
Price
£ / box
£ 128.56
Insulation fixing A-ISOL
Type: Polyethylene insulation fixing with coarse threads, flat head, a setting and screw receptacle.
A-ISOL, with receptacle for screw 4.5 - 5.0 mm Ø.
Applications: For fastening additional layers of FOAMGLAS® on top of the base layer.
Installation: Pre-insert
Advantages:
- No thermal bridges are created.
- Possible to join two rigid FOAMGLAS® Boards, Slabs or Blocks with A-ISOL.
- Fast efficient installation with common tools.
- A-ISOL with receptacle for SW 5 bit.
Instructions: To be used according to the instructions from FOAMGLAS® technical department.
The A-ISOL fixing can be screwed with a cordless screw driver / Philipps-tip screwdriver.
Consumption: Depending on the application wall / ceiling
Packing unit: Box with 50 pieces
Storage: Store dry
Article number
PC
PC
PC
PC
Type
0173
0174
0175
0176
Packing unit, box
A-ISOL 50
A-ISOL 85
A-ISOL 120
A-ISOL 155
Price
50
50
50
50
pcs
pcs
pcs
pcs
30
£ / box
£
£
£
£
24.23
36.95
47.17
61.13
Insulation brackets and Tools
PC® Anchor F, including fixings
Type: Mounting bracket in stainless steel
Application: Hidden fixing bracket for fixing FOAMGLAS® slabs on ceilings and
walls. Suitable base surfaces: concrete, masonry, brickwork, blockwork, timber
and metal. In case of hollow block bricks or ventialted bricks contact the
manufacturer for the recommended fixing technique.
Length of bracket: 20 mm / 30 mm / 60 mm
Spacing: For walls: 2 brackets / m2 ; for soffits: 4 brackets / m2
Packing unit: Box with 100 brackets; supplied with suitable fixings for masonry,
concrete, brickwork and blockwork
Storage: Store dry.
9Article number
PC 0068
PC 0069
PC 0070
Length of bracket
Size 0
Size 1
Size 2
Insulation thickness
20 mm
30 mm
60 mm
Packing unit, box
40 mm
50 – 90 mm
above 90 mm
Price
100 pcs / box, including fixings
£ / box
£ 79.57
£ 95.48
£ 105.06
Weight per box approx. 10 kg. Pallet dimensions approx. 1200 mm x 1000 mm x 1350 mm.
Cold Adhesive Spreader
Type: Notched rubber spreader, NOTE broom type handle is not included.
Use: For applying PC® 500 and PC® 58 adhesive to substrate.
Article number
Packing unit, piece
Consumption per m2
PC Spreader TYPE 6
6 kg/m2
Price
PC 0110
£ / piece
£ 23.60
Compressed Air Operated PC® 11 Adhesive Applicator
Compressors to be provided by others.
The compressor type required is: 10 bar, 145 psi, 24 litre receiver, 220 l/min, 8 cfm.
Note: The compressor powered air operated pump for PC® 11 can also be rented
(deposit of £ 450 payable).
Article number
PC 0160
Packing unit, piece
Price
Pump for 3 kg PC 11
®
(air operated applicator)
£ / unit
£ 789.33
PC® Mix-Spindle
Type: Mixing spindle for powder based adhesives, PC® 56, PC® 58, PC® 72A2 etc.
Use: To be used with a heavy duty mixing drill, at least 800 rpm.
Article number
PC 0154
Packing unit, piece
Price
1 pcs
£ / unit
£ 15.71
PC® Sawblade
Type: Sawblade made from molybdenum alloyed high-quality, high-speed steel (HSS).
Use: Cutting of FOAMGLAS® slabs and boards.
Article number
PC 0165
Packing unit, piece
1 piece
Price
Length / teeth 575/6
£ / unit
£ 22.88
31
Questions & Further Information
Frequently Asked Questions & Further Information
A | Where can I find Technical Information?
1.
2.
3.
For FOAMGLAS® Technical and Installation Literature, see www.foamglas.co.uk, or email info@foamglas.co.uk
For FOAMGLAS® Technical and specification information, see www.ribaproductselector.com/foamglas
For your local Technical representative, see uk.foamglas.com/en/building/company/contact/contact_us
B | Pricing Information
1.
2.
3.
4.
5.
6.
7.
To download a current price list go to uk.foamglas.com/en/building/quicklinks/price_list/
For Distribution Customers enquiring about distribution terms please contact info@foamglas.co.uk
For FOAMGLAS® Perinsul HL pricing – see PERINSUL HL pricing page 3
All prices provided are valid for 30 days unless amended in writing by Pittsburgh Corning UK Ltd.
The Company reserves the right to amend prices subject to one month’s notice
Terms of payment are strictly 30 days net monthly
All materials and accessories are available in full pack quantities only
C | Where to Buy FOAMGLAS® & Accessories
1.
2.
To download a current price list go to uk.foamglas.com/en/building/quicklinks/price_list/
For a list of our Distributers go to uk.foamglas.com/en/building/company/contact/distributors
D | Placing Orders
1.
2.
3.
4.
5.
Full delivery address, including postcode, contact name and phone number to be provided in writing at time of order
Orders are to be sent preferentially to info@foamglas.co.uk or alternatively by fax on +44 (0) 20 7492 1730
Please ensure that the standard delivery conditions are met before placing an order –
see below standard delivery conditions
E | Small Orders
1.
2.
3.
4.
Mainland England, Scotland and Wales orders of less than £2,300 (List price excl VAT), a delivery charge
of £150.00 Gross shall be charged
Standard delivery conditions apply. To request special delivery conditions, please email info@foamglas.co.uk
F | Transportation and Delivery of FOAMGLAS® Perinsul HL Materials
1.
2.
For PERINSUL HL delivery details and charges – see PERINSUL HL pricing page 3
For orders over 21 packs, delivery may be on our standard articulated trailer with
standard delivery conditions of vehicle. For further information email info@foamglas.co.uk
G | Standard delivery conditions: Transportation Cost and Destinations
1.
2.
3.
4.
5.
6.
Mainland England, Scotland and Wales orders over £2,300 (List price excl VAT) delivery is free of charge
Mainland England, Scotland and Wales orders of less than £2,300 (List price excl VAT),
a delivery charge of £150.00 Gross shall be charged
For deliveries to UK mainland ports VAT is applicable
For VAT exempt deliveries outside the UK Mainland, please email info@foamglas.co.uk for further information
For N Ireland a delivery surcharge may apply, for further information please email info@foamglas.co.uk
For certain Inner City Postcodes, standard Articulated Trailers will be restricted.
For further information please email info@foamglas.co.uk
32
Questions & Further Information
H | Where can I find Technical Information?
1.
2.
3.
4.
All Deliveries shall be by standard CURTAIN SIDED ARTICULATED TRAILERS, measuring 16.5m x 2.6 m x 4.1m high,
a clear turning area of 20 m x 20 m is required. Articulated Trailers have 52 stackable pallet spaces.
Please note that not all pallets are stackable. For further information please email info@foamglas.co.uk
All articulated trailer delivery destinations require forklift offloading equipment which is to be provided by others.
Should the delivery driver be delayed awaiting offloading; Pittsburgh Corning reserve the right to charge
for any additional costs incurred
Should the site be unable to accept our standard delivery vehicle, please ensure the insulation distributor can provide
local delivery using smaller vehicles
Rigid Vehicles are the exception and shall incur an additional freight charge with a delay on lead times.
I|
Delivery to Inner City Locations
1.
For certain Inner City Postcodes, standard Articulated Trailers will be restricted.
Should the site be unable to accept our standard delivery vehicle, please ensure the insulation distributor can provide
local delivery using smaller vehicles
2.
J | Offloading
1.
2.
All articulated trailer delivery destinations require forklift offloading equipment which is to be provided by others.
Should the delivery driver be delayed awaiting offloading; Pittsburgh Corning reserve the right to charge
for any additional costs incurred
All offloading equipment and manpower to be provided by others
K | Storage of Materials and Accessories
1.
2.
3.
4.
Insulation materials should not be stacked more than 2 pallets high, accessories and adhesives cannot be stacked
All products should securely stored and have protection from the weather
Adhesive must be stored at 5°C or above, protected from direct heat and sunlight
For Material Safety data sheets please email info@foamglas.co.uk
L | Order Cancellation, Changes and Returns
1.
2.
Cancellations or changes to the Order or Delivery Address must be notified in writing 4 working days before
the dispatch date. Pittsburgh Corning reserve the right to charge for any additional costs incurred
Only in exceptional circumstances FOAMGLAS® Insulation products will be considered for return. See Pittsburgh
Corning (United Kingdom) Limited General Terms and Conditions of Sale. Accessories are non-returnable.
For a copy of the returns policy please email info@foamglas.co.uk
M | Availability
1.
2.
3.
4.
5.
For
For
For
For
For
FOAMGLAS® Perinsul HL: delivery is typically 3-5 working days from receipt of order
UK stock items, delivery is typically 3-5 working days from receipt of order
European stock items, delivery is typically 5-7 working days from receipt of order
products manufactured to order please allow 10 - 21 working days from receipt of order
Tapered insulation please allow 10 - 21 working days from receipt of order & design approval
33
General terms and conditions of sale
General Terms and Conditions of Sale
All sales by Pittsburgh Corning (United Kingdom) Limited ("PC-UK") are governed by these General Terms and Conditions of Sale ("Terms"). The Buyer agrees to be bound by these
Terms upon placing an order with PC-UK to the exclusion of any other terms (including any terms or conditions contained in, or referred to in the Buyer’s purchase order, confirmation of order or other correspondence, or implied by law, trade custom, practice or course of dealing.
1. Price and Payment: Product prices are as listed in PC-UK’s Current Trade Price Ruling for Goods, as amended from time to time at the sole discretion of
PC-UK. Prices are primarily stated in British Pounds (Sterling) and do not include any tax or other charge on the production, sale or shipment of the product imposed by any governmental authority ("Tax"). All Tax shall be paid by the Buyer in addition to the prices quoted or invoiced. In the event that PCUK is required to pay any Tax in relation to the supply of the Product to the Buyer, the Buyer shall reimburse PC-UK in full. All orders will be invoiced at the prices in effect at the time of shipment less any applicable discounts.
Payment terms are net 30 days with credit approval by PC-UK and payment must be made in the invoice currency charged. In the event of Buyer’s failure to pay an invoice by the
due date, PC-UK reserves the right to charge interest on such overdue amount at the rate of 2% above the base interest rate of Barclays Bank. All special requirements such as
additional inspections, documentation, labelling or request for certification of compliance must be agreed upon by PC-UK when Buyer places the order and may incur additional
charges.
2. Order Acceptance: All orders are subject to acceptance by PC-UK. No contract shall exist between Buyer and PCUK unless and until PC-UK issues an Order Acknowledgement.
Also, additional written documentation or specifications may be requested before an order is accepted.
3. Shipment: Shipment of Product within the United Kingdom will be DAP (Incoterms 2010) with unloading at buyer’s risk unless otherwise stated. All other shipments will be Ex
Works Tessenderlo Belgium (Incoterms 2010) unless otherwise stated. Delivery to the first port of shipment shall constitute delivery to the Buyer. Title and property in all Products
will remain with PC-UK until PC-UK has received full payment for the relevant Product (including any Tax or late payment interest due). Risk in all Products shall pass to the Buyer
on delivery. The Buyer shall at all times following its assumption of risk, at its own expense maintain all proper insurance with a reputable insurer against all risks for the full current replacement value of such Product. The Buyer shall be free to re-sell the Product before title has passes to the Buyer, providing that the proceeds of sale are held on trust for
PC-UK (save that the Buyer may deduct and retain any sum by which the proceeds exceed the amount owing to PC-UK).
4. Delivery: Product will be available for shipment based on factory lead times in effect at the time the order is accepted by PC-UK. Delivery of the product must take place within two (2) weeks after notification is sent to the Buyer that the Product is available for shipment. If Product does not ship during the two (2) weeks after notification due to a delay
by the Buyer, payment for the Product shall become due on the date PC-UK is prepared to make delivery and PC-UK’s delivery obligations shall be deemed fulfilled and all risk of
loss or damage to such Product shall thereupon pass to Buyer. In the event the Buyer delays delivery and PC-UK, in its sole discretion, agrees to such delay, PC-UK may place such
product in storage either at its manufacturing location or at an off-site location. If the Product is stored, all costs incurred by PC-UK in connection with such storage, including,
without limitation, costs of preparing Product for storage, placement into storage, handling, storage or, demurrage fees, inspection, preservation and insurance shall be due and
payable by Buyer upon receipt by Buyer of the relevant PC-UK invoice therefore. When conditions permit and upon payment of all amounts due hereunder, PC-UK shall arrange,
on behalf of Buyer, and at the cost of Buyer, for shipment to a destination mutually acceptable to PC-UK and Buyer. Buyer may not export any Product to any place outside the
country of delivery to any other country without first obtaining any necessary export license or approval. Buyer shall in no event export any Product to any person anywhere in the
world engaged in the design, development or manufacture of any weapon of mass destruction or delivery system.
5. Shortage or Damage: No claims for shortage in quantity of Product or damage to Product delivered will be considered unless reported to PC-UK within (i) 48 hours in the case
of shipments within the United Kingdom and (ii) 14 days in the case of shipments to a destination outside of the United Kingdom. Claims for damaged Product should be made
by the Buyer directly to the delivering carrier upon receipt of shipment. Shortages and / or type of damage should be noted on the freight bill and / or bill of lading at the time of
delivery and a copy faxed to PC-UK. Status of the seal should also be documented as "intact" or "broken". Shortages for LTL and list shipments must be noted as such on the
freight bill at the time of delivery.
6. Returns: The Buyer can only return Product following written authorization from PC-UK. Only standard Insulation Products in an undamaged condition may be returned.
Accessories and specially manufactured Insulation Product are non-returnable. All returns must be in accordance with the PC-UK Returns Policy.
7. Cancellation and Changes to Order: The Buyer may cancel its order only upon written notice to and consent of PC-UK. On cancellation of an order, the Buyer shall pay to
PC-UK any costs reasonably and properly incurred by PCUK in relation to such cancellation. Buyer may make changes to a product order for standard material only up to 14 days
prior to shipment by PC-UK. All orders for Fabricated and Special order materials are only subject to change with the express written permission of PC-UK.
8. Limitation of Warranty and Exclusive Remedy: PC-UK warrants only that the product shall conform to PC-UK’s published specifications for the Product when shipped to
Buyer. PC-UK will replace without charge goods shown by Buyer to be otherwise than as specified. PC-UK’s liability is expressly limited to such replacement unless PC-UK, at its
sole discretion, elects to issue a credit to Buyer. PC-UK shall have no further liability to the Buyer. If requested by PCUK, Buyer shall return allegedly nonconforming Product to
PC-UK’s manufacturing location, and if such Product is replaced, PC-UK will pay freight thereon. In no event will credit, adjustment or return of allegedly nonconforming Product
be allowed when the Product has been in the possession of Buyer for more than three (3) months from the date of shipment by PC-UK. Except as provided herein, all conditions
and warranties whether express or implied by statute, common law or otherwise, as to the quality or fitness for any of the Products or their correspondence with description are hereby excluded to the fullest extent permitted by law.
9. Recalls: In case of critical product faults justifying a recall of the Products, the Buyer is obliged to confer with PCUK to ensure that the Buyer’s related actions will harmonize
with PC-UK’s policy in respect of product recall. The costs reasonably incurred by the Buyer for any such product recall will be reimbursed by PC-UK to the Buyer if PC-UK is liable
therefore. The Buyer shall implement and maintain adequate systems and records to ensure full traceability of all batches of Product.
10. Limitation of Liability: PC-UK’s liability to the Buyer shall be limited to the price of the Product with respect to which any breach or loss occurs. Neither party shall in any circumstances be liable (in contract, tort, statutory duty, or otherwise and irrespective of any negligence) for any loss of profits, loss of opportunity, or indirect or consequential losses. Any right of action, claim or remedy in tort (including without limitation, breach of statutory duty) that the Buyer may have against PC-UK is excluded to the fullest extent permitted by law. Nothing in these Terms shall limit or exclude liability of either party for (i) death or personal injury resulting from negligence, (ii) fraud or fraudulent misrepresentation, or (iii) breach of the terms implied by section 12 of the Sale of Goods Act 1979.
11. Force Majeure: PC-UK shall not be liable, nor deemed in default hereunder, for any failure or delay in delivering the Product or in the performance of its other obligations to
Buyer hereunder, caused by or arising out of (a) compliance in good faith with any applicable law or regulation or judicial claim of whatever nature and whether national, foreign
or local (including the European Union); (b) all acts of God (such as, but not limited to, floods, fires, or tornadoes); (c) strikes and other labour trouble; (d) delays or non-performance by suppliers (or other third parties) of raw products, power or other needed supplies or services; (e) delays or non-performance by transporting carriers; and/or (f) any government action or inaction; or (g) any other cause, contingency, or circumstance not subject to the reasonable control of PC-UK affecting the performance of PC-UK’s obligations
hereunder. PC-UK shall determine in good faith the extent to which it can reasonably control a cause, contingency, or circumstance affecting its performance obligations.
12. Retention of Title: The risk in the goods shall pass from the seller to the buyer upon delivery of such goods to the buyer. However, notwithstanding delivery and the passing
of risk in the goods, title and property in the goods, including full legal and beneficial ownership, shall not pass to the buyer until the seller has received in cash or cleared funds
payment in full for all goods delivered to the buyer under this and all other contracts between the seller and the buyer for which payment of the full price of the goods thereunder has not been paid. Payment of the full price of the goods shall include the amount of any interest or other sum payable under the terms of the and all other contracts between the seller and the buyer under which the goods were delivered.
13. Arbitration: The Buyer and PC-UK agrees that any dispute or controversy arising hereunder (including the validity of this provision) that cannot be resolved between them by
good faith negotiations shall be finally settled under the Rules of Arbitration of the London Court of International Arbitration by one arbitrator appointed in accordance with said
Rules. Any such arbitration proceeding shall take place in London in the English language.
14. General: If any provision of these Terms is held to be unlawful, void, or for any reason unenforceable, then that provision shall be deemed severable from these Terms and
shall not affect the validity and enforceability of any remaining provision. Any waiver by PC-UK of a breach of any term or condition of sale shall not constitute a waiver or prejudice PC-UK’s right to otherwise subsequently demand strict compliance with that or any other term or condition of this offer of sale. These Terms are subject to change by PC-UK
at any time without notice and all product sold by PC-UK is subject to PC-UK’s latest published standard terms and conditions of sale. These Terms and each supply of Product by
PC-UK to the Buyer and any dispute or claim arising out of or in connection with it or its subject matter of formation (including non-contractual claims) shall be governed by and
construed in accordance with English law. These Terms constitute the whole agreement of the Buyer and PC-UK in relation to its subject matter and supersedes any previous agreement, representations, warranties or arrangement (whether in writing or oral) between them in relation to that matter. All clerical errors are subject to correction.
34
www.foamglas.co.uk
Pittsburgh Corning (UK) Ltd
31 – 35, Kirby Street, Hatton Garden
London, EC1N 8TE
Phone +44 (0)20 7492 1731, Fax +44 (0)20 7492 1730
info@foamglas.co.uk
Pittsburgh Corning Europe NV
Headquarters Europe, Middle East and Africa (EMEA)
Albertkade 1, B - 3980 Tessenderlo, Belgium
Phone +32 (0)13 661721
www.foamglas.com
O-PDF-0-0116 B-UK-en-PRL-0197

Price List 2016 - FOAMGLAS® Pittsburgh Corning

Transcription

Similar documents

Save page as PDF

Pallet Jacks - National Cart

palletless loading inverter - Premier Handling Solutions

Destacker Pallet Dispenser

Wexford Irish Cream Ale is based on a traditional Irish recipe from

Read Full Letter - January 22, 2014

Chancey - George R. Stuart Elementary

Pro`s Pick Pellets

40 x 48 RackoCell® Rackable Pallet Now Available with X

parquet - Bricoman