Unique textured panelling

Unique textured panelling
Mobilia manufactures custom made furniture
and supplies a unique selection of threedimensional wall and ceiling coverings including
decorative veneered panels. These are extensively used to add texture & depth by providing
a dramatic contrast of light and shadow to
architectural spaces.
Our patterns offer architects and designers
the opportunity to create a strong signature
to their interior schemes. Perfect for a vast
range of applications, our panels are used in
residential, retail, leisure and office interiors
with some products also being suitable for
furniture use.
Sculpted Patterns
The Sculpted range of panels provides the greatest flexibility
in choice of patterns and finishes. The patterns are sold on
a square meter basis with the panels supplied to size to
suit the overall area specified. The patterns are designed
to run continuously across multiple panels either vertically,
horizontally or diagonally.
Image shows Honeycomb 01
Patterns are usually cut into MDF with a choice of any RAL,
Pantone or NCS coloured lacquer applied to the surface in
a matt, satin or pearlescent sheen or alternatively in one
of a set range of ‘suede’ effect coloured lacquers. Some
patterns are available in wood effect and solid colour vinyl
wrapped finishes.
At the highest level of specification, patterns can be specified in multilayers of veneer. Depending on the depth of
the pattern, as many as 16 layers of veneer are adhered
to the surface of the substrate to build a thickness for
the pattern to be cut into. Veneer multi-layers offer the
opportunity of introducing further levels of customization
by specifying a number of different veneer species in the
build up of the multilayer. The varying depth of the cut pattern will reveal the different veneer species as strata of
contrasting veneers.
Image shows Stream 07 - TTSP Architecture & Design
Stream 03
Stream 07
Ripple
River
Rift
Honeycomb 01
Honeycomb 06
Honeycomb 09
Drift
V21
V24
Sculpted patterns
All patterns available vertically, horizontally or diagonally. Maximum panel size 3000 x 1220mm.
RAL, Pantone or NCS coloured lacquer
Veneer finishes
Tramline
Sculpted patterns
All patterns available vertically, horizontally or diagonally. Maximum panel size 3000 x 1220mm.
RAL, Pantone or NCS coloured lacquer
Veneer finishes
Image shows Stream 07 - Jacob Webber
Stream 01
Solid Surface
Ideally suited for locations where a more robust finish is
required, these patterns can also be used in environments
where there is a degree of moisture as the surface is water
resistant. Patterns are supplied as standard sized panels
or can be provided to size with the pattern matched across
multiple panels.
Stream C01
Stream C11
Honeycomb C06
Honeycomb C09
12mm Glacier White Corian® on
an 8mm MDF core. Maximum
panel size 1800 x 910mm
12mm Glacier White Corian® on
an 8mm MDF core. Maximum
panel size 1800 x 910mm
4mm Glacier White Corian® on a
16mm MDF core. Maximum panel
size 2470 x 910mm
4mm Glacier White Corian® on a
16mm MDF core. Maximum panel
size 2470 x 910mm
Rake C04
Rake C04 Walnut
Rake C04 Zebrano
4mm Glacier White Corian® on a
16mm MDF core. Maximum panel
size 2470 x 910mm
4mm Glacier White Corian® with
Am Black Walnut veneer on a
16mm MDF core. Maximum panel
size 2470 x 910mm
4mm Glacier White Corian® with
Zebrano veneer on a 16mm MDF core.
Maximum panel size 2470 x 910mm
Stream C03
Image shows Rake C04
4mm Glacier White Corian® on a 16mm MDF core.
Maximum panel size 2470 x 910mm
Solid Surface
Glacier White Corian® on MDF core
Mode
Mode 25
Also available vertically
10
Image shows Mode 25 - Platform
The Mode range consists of pre-produced panels,
available at 2440 x 1220 x 15mm. These patterns
are of a larger scale than our custom range patterns meaning they are quicker to produce and
are therefore a more cost effective solution with
the added benefit that most patterns are available
from stock in a white primer. We recommend
that these panels are installed with a flash gap or
trim detail between panels. Due to the production
methods used we cannot guarantee an absolute
pattern match if panels are abutted.
Mode 10
Mode 19
Mode 21
Mode 22
Mode 24
Mode 25
Mode 26
Mode 27
Mode
Primed white
11
Woven and Cane
The Woven range of patterns are hand made by
weaving various widths of quarter cut veneers
together, glued to a substrate & finished in a
clear matt or satin lacquer. Patterns can be
made from your choice of a single veneer species
or two contrasting veneers.
The Cane products consist of natural bamboo
or rattan canes woven together all of which, with
the exception of Cane 3B & 3C, are supplied on a
fabric backing ready to be bonded to a substrate.
All Cane products are supplied unfinished.
Mode 28
Primed white
12
Chequer
A chequered pattern available
in any QC veneer. The strips of
veneer can be specified as 42,
50, 60 or 100mm wide, creating
larger or smaller squares.
Chequer used on furniture
Mode
Image shows Mode 25 - Taylor Hammond
Mode 30
13
Diagonal
Lyre
Plaid
Galaxy
Cane 3C
Cane 10
Cane 20
Available in any QC veneer the strips
being woven on the diagonal.
Available in the same options
as Chequer but combining two
contrasting QC veneers.
A chequered pattern combining 2
differing widths of veneer. Available
in any QC veneer or a combination
of two contrasting QC veneers.
A veneered panel overlaid with a
woven veneer lattice, applied either
diagonally or at right angles.
Available in same species veneer
or two contrasting veneers.
Yellow to light beige
2440 x 1220 x 3mm, unfinished.
Rattan canes approximately 3mm
wide and 1mm thick.
Roll 900 x 9290mm, unfinished.
Woven Wicker canes approximately
3mm wide and 3.5mm thick.
Roll 900 x 15, 240mm, unfinished.
Sunburst
Vista
Cane 3B
Cane 30
Woven Wicker canes approximately
3mm wide and 2mm thick.
Roll 900 x 15, 240mm, unfinished.
Cane 711
50mm wide veneers woven together
to create a lattice work with 15mm
open squares between the veneer
strips. Available in any QC veneer.
Brown to dark beige
2440 x 1220 x 3mm, unfinished.
Cane 710
Radial veneered woven strips of
QC veneer.
Yellow to light beige Bamboo canes
approximately 4.5mm wide and
2mm thick. Roll 1800 x 5000mm,
unfinished.
Brown to dark beige Bamboo canes
approximately 4.5mm wide and
2mm thick. Roll 1800 x 5000mm,
unfinished.
Woven and Cane
Hand woven veneers are available at maximum panel size 3000 x 1220mm.
14
Woven and Cane
Natural bamboo & cane products
15
Lakar 1
Lakar 2
Lakar 3
Lakar 4
Lakar 5
Lakar Slim 1
Lakar Slim 2
Lakar Slim 3
Lakar Slim 4
Lakar Slim 5
Lakar
Inspired by the vivid colours of Indian fabric designs, Lakar & Lakar
Slim use traditional marquetry techniques to combine natural and
dyed veneers and turn them into innovative contemporary wall
panels. Available in 2 scales of strip widths, these patterns are
standard sized panels 2500 x 1220mm on a 16mm MDF core
or can be supplied as a 2150 x 950mm Placorex – layers of veneer bonded together to a thickness of 1.5mm which is suitable
for pressing by a joiner onto your own substrate and is ideal for
manufacturing doors. Both these options are available on short
delivery. Alternatively we can supply custom sized panels with a
longer lead time.
16
17
Motif
The Motif range consists of either
coloured lacquer or veneered
MDF panels with a motif cut into
the MDF. The motifs work on a
repeat so that when several panels
are abutted side to side or end
to end the pattern will continue
across to make a larger motif.
Of course, the panels can also be
used individually as an ‘artwork’.
Each pattern is available in any
RAL, Pantone or NCS coloured
lacquer as well as cut into Anigre,
Makore, Oak, Sycamore, Walnut
or Wenge veneered boards with
a white melamine backing. The
panels are 2500 x 1200 x 20mm,
other veneer options and custom
sized panels are also available
upon request.
Canvas
Chalice
Ornament
Globule
Reed
Coral
Image shows 3 panels of Globule
1
2
3
Standard Veneer options
1. Am Black Walnut
2. Oak
3. Makore
4. Sycamore
5. Wenge
6. Anigre.
18
Arabesque
Motif
Other veneer finishes are available on request.
4
5
6
RAL, Pantone or NCS coloured lacquer
Veneer finishes
19
Cast Patterns
Offering an effective alternative to wood, these panels
are fabricated from 40-45% crushed almond shells
which are a bi product from the local nut industry, mixed
with resins. In this way vegetable waste is not only turned
into bio-degradable & recyclable objects but can also be
considered environmentally friendly as it can function as
a wood substitute thereby avoiding the felling of trees.
Pyramid
Ribbon
A square tile with a raised spherical
section. 595 x 595 x 24/55mm
A square tile with a slightly raised
Pyramid. 596 x 596 x 10/50mm
A rectangular tile with undulating
bands forming a sinuous pattern.
1200 x 600 x 20/30mm
Cushion
Slot
Slot 2
A square tile with a slight radius
to all four edges giving a padded
effect. 495 x 495 x 40mm
A square tile with 10mm wide semi
circular channels which can be used
with the channels running horizontally,
vertically or alternating. 600 x 600 or
1200 x 600 x 25mm.
Available in 600 x 600 or
1200 x 600 tile sizes with 20mm
wide semi circular channels.
Dome
The nature of the casting process allows the panel surface
to mimic even the smallest crenulations which results in
convincing simulations for example of wood and leather.
The finished product is water resistant, resistant to insects
and has good thermal & acoustic characteristics.
The lightweight properties of the panels, combined with
the large panel sizes make them quick & easy to install. If
necessary, panels can be cut & machined using standard
woodworking tools.
Finish options are gloss or matt lacquer in any RAL,
Pantone or NCS colour, metallic, wood & leather effects.
RAL, Pantone or NCS coloured lacquer
Metallic finish
Blurred leather effect
Image shows Ribbon
Image shows Dome
Cast patterns
Made from crushed almond shells and resin
A square tile that imitates padded
canvas upholstery. 60 x 60 x 25mm
Stitch
A square tile which imitates a
leather padded panel with edge
stitching. 500 x 500 x 30mm
Dimple
Lunar
Facet
A square tile with small half
spheres arranged regularly over
the surface. 596 x 596 x 22mm
A square tile domed towards
the centre into which are four
semi-circular cuts.
595 x 595 x 22/55mm
A square tile with four slightly
raised planes creating a cross at
the centre formed by the different
levels. 600 x 600 x 22/33mm
Capsule
Bolster
A square tile with an oblong scoop
across the surface.
600 x 600 x 21mm
22
Image shows Quilt
Cast patterns
Made from crushed almond shells and resin
RAL, Pantone or NCS coloured lacquer
Metallic finish
Blurred
leather effect
A rectangular tile with two raised
curves running across the width.
2000 x 800 x 20/30mm
Cast patterns
Made from crushed almond shells and resin
RAL, Pantone or NCS coloured lacquer
Metallic finish
Blurred
leather effect
Image shows Facet
Quilt
More
Woodblock
Pebbles
Octagonal
A square ceiling or wall tile with
an arabesque inspired design in
imitation oak.
600 x 600 x 25/45mm
A square ceiling or wall tile which
imitates layers of weathered pine
wood blocks.
600 x 600 x 25/35mm
A rectangular ceiling or wall tile
which imitates pebbles on a bed of
plaster. 800 x 600 x 12/50mm
A square ceiling or wall tile with raised
mouldings forming an octagon. Abutting the
panels creates alternating squares between
the octagons. 800 x 800 x 20/60mm
Star
Chevron
End Grain
Thistle
A square ceiling or wall tile in imitation
oak with 4 slopes towards the centre
and a triangular moulding round the
edge. 600 x 600 x 20/60mm
A square ceiling or wall tile in
imitation pine cubes arranged as
a stepped pyramid.
600 x 600 x 18/33mm
A square ceiling or wall tile
in imitation pine inspired by
Southern European ceilings.
600 x 600 x 19/90mm
Image shows More
Cast patterns
Made from crushed almond shells and resin
RAL, Pantone or NCS coloured lacquer
Cast patterns
Made from crushed almond shells and resin
Wood effect
RAL, Pantone or NCS coloured lacquer
Wood effect
Image shows Thistle
A square ceiling or wall tile in imitation
oak with a wood strip pattern motif
forming a star shape.
600 x 600 x 22/62mm
Freeform
Freeform elements are a low budget
solution to add texture & interest to a
flat surface.
Gem
350 mm
280 mm
The Freeform can be supplied in any
RAL, Pantone or NCS coloured lacquer,
but are more usually supplied in a
primed finish. The primed shapes can
be stuck directly to the wall in your
chosen arrangement and once this is
done the wall including the Freeform
elements is then painted to provide an
integrated appearance.
40 mm
20 mm
40 mm
400 mm
175 mm
350 mm
Freeform
Made from crushed almond shell and resin
Image shows Pastel
26
Oval
300 mm
Pastel
200 mm
A collection of individual 3-dimensional
geometric shapes which allow architects and interior designers, the freedom to decide on the layout of the
elements using as many or as few of
the shapes as you wish. The individual
pieces can be spaced on a grid, randomly or grouped together to create
further patterns.
RAL, Pantone or NCS coloured lacquer
Primed white
27
Stud
Bubbles
Palm
Oval
Rib
2300 mm
RAL, Pantone or NCS coloured lacquer
28
200 mm
250 mm
60 mm
16 mm
50 mm
400 mm
400 mm
360 mm
200 mm
300 mm
60 mm
20 mm
Freeform
Made from crushed almond shell and resin
9.7 mm
275 mm
200 mm
20 mm
100 mm
40 mm
300 mm
80 mm
Classic
Freeform
Made from crushed almond shell and resin
Primed white
RAL, Pantone or NCS coloured lacquer
Primed white
29
Custom Designs
If our extensive selection of patterns isn’t enough for you,
the casting techniques used allow bespoke patterns to be
made without major cost increases. Shown here are a few
examples of our custom installations.
30
Lattice
This is a custom made
latticework used to clad
the exterior of a hotel in
Seville comprising cast
units which when assembled create a number of
different patterns. The
latticework also runs
across windows creating a degree of privacy
and shading.
Paper Wall
Destined for cladding the exterior of a building in Sweden, the panels
simulate stacked reams of paper and demonstrate how far the
material is capable of mimicking other materials.
Restaurant Wall
A combination of flat panels and 2 styles of relief
panels bearing knives, forks & plates in one and
bottles, glasses & cocktail shakers in the other.
This demonstrates how panels can be customised for branding purposes to reflect a franchise
or chain identity. We are also able to incorporate
logos and signage.
31
Furniture
Mobilia manufactures custom made
items of furniture for individuals and
corporations. Alongside traditional
manufacturing skills we also exploit
the latest CAD/CAM software to
aid manufacture.
The images shown, illustrate a variety of items manufactured for JAC
Design Group. The project included
both free standing and built in items
of furniture. Panelling and sliding
coats cupboard doors in the Ante
room incorporated our River pattern in American Black Walnut veneer whilst panels of Stream 07 in
a suede effect lacquer were used
in niches. The 6½ M Boardroom
table in quarter cut American Black
Walnut incorporates microphones
and pop up power modules as well
as other AV equipment to be used
in conjunction with the AV wall unit.
Other items produced included credenzas, built in cupboards in meeting
rooms and reception signage.
32
Stott Credenza in association
with OPM Furniture
Mobilia Ltd
8 Shardcroft Avenue
London SE24 0DT
T 020 7733 0288
F 020 7733 8193
E info@mobilia.ltd.uk
www.mobilia.ltd.uk
33
MAMP 05
Boomerang
MAGH 4-12C
MAMP 06
MAGH 4-12E
Rain
Acoustic
Mobilia also provide a wide range of acoustic
panels. These panels are highly decorative
and are designed to suit acoustic correction
or attenuation for meeting rooms, theatres,
reception hall, etc. The panels can be treated
for fire resistance and can be fabricated to
order. For a full range of design and technical specification please contact Mobilia by
telephone 020 7733 0288 or by emailing
us at info@mobilia.ltd.uk
34
Acoustic patterns
RAL, Pantone or NCS coloured lacquer
Veneer finishes
Mobilia Ltd
8 Shardcroft Avenue
London SE24 0DT
T 020 7733 0288
F 020 7733 8193
E info@mobilia.ltd.uk
www.mobilia.ltd.uk
Design www.trang-le.com