Approach / Threshold / Side Row

Transcription

Approach / Threshold / Side Row
Inset Light – High Intensity
IL 269R Inset Light 12”
IL 269R APH
Uni-directional
IL 269R THR
Uni-directional
IL 269R ASR
Uni-directional
Colors
white, green, red
Application
Features
Inset halogenous light used for approach center line
as well as threshold and side row lights and cross bar
up to CAT-III operations.








Specification
Robust aluminum housing, protection class IP68.
Optimal prism protection
Smooth flat design 15 mm above ground
Dichroic colour filters
No optical adjustment needed after maintenance
operations.
Cable length 30 cm, plug vulcanised
Power consumption 3 x 62 W
Nominal lifetime 1500 hours at rated current,
operation average 5000 hours
ICAO Annex 14, Vol. I
IEC TS 61827
FAA EB 67D
* We reserve the right to change technical data, prices and details at any point in time. Errors may occur.
ERNI AGL AG I Your specialist for High Quality Airfield Lighting Equipment – Member of ADB GROUP
Zürichstrasse 72 — 8306 Brütisellen — Switzerland
Tel: +41(0)44 835 33 43 I Fax: +41(0)44 835 33 42 I info@erni-agl.com
www.erni-agl.com I www.adb-air.com I www.lucebit.com 20150115TK
Approach /Threshold /Side Row
Modular Design
Upper Part Assembly



Sturdy aluminum housing, long
term tightness
Lenses with solid impact
protection
Compression proof silicon putty
Light installation



Customised aluminum bracket
Serial connected lights
3 halogenous lamps with
integrated reflector
Lower Part Assembly



Replacement Parts
Packaging Data
Article
IL 269R
Weight
6.4 kg
Aluminum cast housing
Seal tight cable gland
Flexible cable groups
Dimensions
302 x 302 x 145 mm





Upper part assembly
Light installation
Lower part assembly (without cable)
Cable with plug
O-Ring seal and screw kit (for 20 fixtures)
* All parts come with corresponding seals, spacers and screws
Photometry and Power Consumption
Performance (Typical Data) *
ERNI
Beam shape
Color
Main Beam
Power
consumption per
beam
6.6 A
Average
Intensity
Minimum
Intensity
IL 269R
APH
White
3 x 62 W
17’811 cd
3’072 cd
IL 269R
THR
Green
3 x 62 W
13’944 cd
5’704 cd
IL 269R
ASR
Red
3 x 62 W
6’109 cd
2’657 cd
* Photometry adapted to 65 VA per lamp
Order Code
IL269R – xxx – x – x
Uni-directional, three lamps
=9
Reflector lamp
=R
Approach Center Line
Threshold
Approach Side Row
CCR Operation
w = White
r = Red
g = Green
= APH
= THR
= ASR
6,6 A = 2,8..6,6 A
Part Number
Order Code
269.019
IL 269R – APH – 6.6 A – w
269.093
IL 269R – ASR - 6.6 A – r
Contact ERNI
IL 269R – THR - 6.6 A – g
Installation
b) 12“ Deep base can with transformer installation
at bottom (Fig. 2)
112
12.7
15
a) 12“ Shallow base, bottom or side entry (Fig. 1)
Note: Tightening torque range for all screws
25..30 Nm
Electrical Data
Accessories
6.6 A with appropriate isolation transformer





O-Ring and Screw Kit (set for 20 fixtures)
12“ Shallow base with bottom or side entry
12“ Deep base can
Individual lamp control unit
Isolation transformers
o According to FAA AC 150/5345-47
o Available power ranges from 160..523 W
*All parts come with corresponding seals, spacers and screws

Approach / Threshold / Side Row

Transcription

Similar documents

Concessionarie smart.