Damp Proof Membranes Brochure

Transcription

DAMP PROOF
MEMBRANE
100% RECYCLED ECOMEMBRANE – 41
DPM TO PIFA STANDARD – 49
TANKING MEMBRANES – 53
LIQUID DPM – 55
DAMP PROOF MEMBRANE
Sustainable damp proof
membrance – 100% recycled
Sustainability in the Construction Sector
There is growing awareness of sustainability within the
construction industry. Not only has it become the main
focus of government policy in the construction sector
(under the banner of Sustainable Communities), but it is
increasingly on clients’ agendas as a result of being asked to
explain their approach to sustainability by investors,
employees or suppliers.
Specifying Recycled Products
Specifying recycled products, in particular those exclusively
manufactured from 100% post use waste, keeps reusable
material in the economy, diverts waste from landfill and
conserves resources.
Plastics consumption is growing about 4% every year in
Western Europe. In the UK it is estimated that plastics account
for 7% of Household Waste of which 1.2 million tonnes are
believed to be recoverable. Every year an estimated 17 billion
plastic bags are given away by supermarkets which is
equivalent to over 290 bags for every person in the UK.*
The construction sector alone is estimated to consume almost
1 million tons of plastic each year so increasing the usage of
recycled products has an enormous impact on the
environment. Independent studies on the production of
products made from recycled rather than virgin polythene
show that the use of recycled plastic results in the following
environmental benefits:
– Reduction of energy consumption by two-thirds.
– Production of only a third of the sulphur dioxide and half
of the nitrous oxide.
– Reduction of water usage by nearly 90%.
– Reduction of carbon dioxide generation by two-and-a
half times.
It is estimated that 1.8 tonnes of oil are saved for every tonne
of recycled polythene produced.**
The Largest Polyethylene
Recycler in Europe
Visqueen Building Products, part of bpi plc Recycled Products
Division, have an enviable reputation as the leader in the field of
polyethylene recycling. Each year we recycle approximately
70,000 tonnes of low density polyethylene across our
Environment Agency Accredited sites.
Operate an ISO 14001 Accredited
Environmental Management System
Our business processes are accredited to ISO 14001,
the internationally recognised standard for Environmental
Management Systems (EMS).
Sustainable Product Development
Many of our damp proof membranes (DPM) and damp proof
courses (DPC) products already contain a significant proportion of
reprocessed and recycled polyethylene. Our product
development strategy has been to introduce new products with
strong environmental credentials.
Visqueen Zedex CPT High Performance DPC minimises material
usage without compromising performance, by using one-third
less material than competing high performance damp proof
course’s.
Visqueen Gas Protection Membranes assist in the safe economic
development of contaminated brownfield sites.
Plaswood an award winning range of wood replacement products
manufactured from 100% recycled polyethylene for use as
boardwalks, bollards, signage and street furniture.
Specifying Recycled
All of our literature is available electronically and in print format
we only use 100% recycled paper of which 80% is classified as
post use.
We live in an increasingly ‘throw-away’ society and households
are the biggest source of plastic waste, nearly 80% of which is
landfilled. By specifying 100% post use recycled products the
recycling loop is closed through the creation of demand for the
materials recovered by recycling collection schemes.
Sustainable:
"(Of economic development, energy sources, etc.) capable of
being maintained at a steady level without exhausting natural
resources or causing ecological damage."
* Source: Plastics in The UK Economy, Waste Watch. **Source:
www.wasteonline.org.uk
41
THE FULL RANGE OF TECHNICAL DETAIL SHEETS CAN BE FOUND BY VISITING VISQUEENBUILDING.CO.UK
42
DAMP PROOF MEMBRANE
DAMP PROOF MEMBRANE
Visqueen EcoMembrane® Guaranteed 100%
recycled post-use consumer waste
As part of our commitment to developing sustainable
products we conducted an extensive research and
development programme with the specific objective of
reducing the amount of polyethylene waste going
to landfill.
With the assistance of WRAP (www.wrap.org.uk) one of
our partners in the project, the result is the first damp
proof membrane produced exclusively from 100% postuse polyethylene waste.
Tensile Strength (CD)
N/mm2
0
5
10
15
20
25
30
60
75
90
800
1000
1200
100
125
150
Traditional
Polythene DPM
EcoMembrane®
New Visqueen EcoMembrane® is the first wholly
sustainable DPM and is guaranteed to contain
Trouser Tear (CD)
0
NO virgin LDPE
NO factory reprocessed waste
15
30
45
Traditional
Polythene DPM
EcoMembrane®
...even the product colour is achieved using a
sustainable source of post-use polymer.
Developed using Visqueen’s years
of experience
As a world leader in the development and application of
damp proof membranes we have a thorough
understanding of the critical performance characteristics
required from a Damp Proof Membrane. During the
Research and Development programme the standards of
performance set for Visqueen EcoMembrane® were not
compromised and the result is a membrane that
achieves a performance level equivalent to our leading
PIFA DPM range.
Elongation (CD)
0
%
400
600
Traditional
Polythene DPM
EcoMembrane®
Nail Tear (CD)
Visqueen EcoMembrane® is Sustainable
Being produced exclusively from 100% post-use
material Visqueen EcoMembrane® is the first sustainable
DPM ensuring valuable reusable material is retained in
the economy and reducing waste going to landfill.
200
0
N
25
50
75
Traditional
Polythene DPM
EcoMembrane®
USING POST USE WASTE
MANUFACTURER
43
A
PRODUCT
A
RECYCLING
A
PRODUCT
A
100% RECYCLED
DAMP PROOF MEMBRANE
ifi
catio
n
E
R
Limite
Cer
t
Visqueen EcoMembrane® – sustainability
without compromising performance
d
B
Certificate No. No.112/04
Independently tested and approved
by BRE
REQUIRED COMPONENTS
To endorse Visqueen EcoMembrane® credentials, we asked
BRE (our second project partner and the foremost UK
authority on construction materials, www.bre.org.uk) to
rigorously test Visqueen EcoMembrane® against the new
DPM European Test Standard BS EN 13967: 2004 (Flexible
sheets for waterproofing. Plastic and rubber damp proof
sheets including plastic and rubber basement tanking
sheet). Consequently Visqueen EcoMembrane® is now the
first DPM to be tested and accredited by BRE to this new
exacting European Standard.
AVAILABLE AS A DOWNLOAD FROM
VISQUEENBUILDING.CO.UK/DPM
VISQUEEN ZEDEX DPC
P3
VISQUEEN DPM JOINTING SYSTEM
P48
VISQUEEN TOP HAT UNITS
?
SPECIFICATION SUPPORT
THE FOLLOWING ITEMS ARE AVAILABLE TO VIEW ONLINE OR
TO DOWNLOAD FROM VISQUEENBUILDING.CO.UK/DPM
Visqueen EcoMembrane® is Robust and
Strong
The conclusions of the exhaustive BRE testing programme
show that Visqueen EcoMembrane®, due to our careful
specification of post-use materials, exhibits high strength
and robustness ensuring that damage during installation
is minimised.
H&S
Visqueen EcoMembrane® provides
Lasting Protection
TECHNICAL DATASHEETS
✓
TYPICAL INSTALLATION CAD DETAILS
✓
BRE CERTIFICATE
✓
HEALTH & SAFETY DATA
✓
REGISTER ONLINE FOR ACCESS TO NBS CLAUSES AND
FOR INFORMATION ABOUT OUR CPD TRAINING SEMINARS
BRE submitted Visqueen EcoMembrane® to a range of
extreme environmental conditions including accelerated
uv exposure / elevated temperature / moisture cycles to
demonstrate that long term damp proof protection is
provided throughout the lifetime of the building.
NBS PLUS CLAUSES
✓
CPD TRAINING SEMINARS
✓
Post-use waste explained
Post-use: "Materials collected from outside the individual
manufacturing industry after it has been used for its
primary purpose. This can include material from
agricultural use, commercial, industrial, retailing,
distribution and domestic outlets, but in all cases the
material will have been used for the purpose for which it
was manufactured." (British Polythene Industries 1994)
ALTERNATIVELY CALL: 01685 840 672 OR EMAIL: ENQUIRIES@VISQUEENBUILDING.CO.UK
44
DAMP PROOF MEMBRANE
ifi
catio
n
E
d
R
Limite
Cer
t
Visqueen EcoMembrane® Product Information
Visqueen EcoMembrane® DPM is a blown film of extruded low-density polyethylene for use as
a Type “A” damp proof membrane as defined by BS EN 13967: 2004. It is manufactured from
100% post-use waste, is black in colour and available in 250mu, 300mu and 500mu thicknesses.
It has been independently accredited by BRE Certification Ltd (Certificate Number 112/04)
copies available on our website.
B
Certificate No. 112/04
Description
Key features
EcoMembrane Product Data
Visqueen EcoMembrane® DPM is classified as non-hazardous
when used in accordance with the relevant Code of Practice
(CP 102: 1973). The product is chemically inert and is not
affected by acids and alkalis that may be present in the sub-soils.
–
Applications and use
Independently accredited by BRE Certification Ltd,
Certificate No.112/04.
–
Manufactured from 100% post-use polyethylene,
diverting more waste from landfill.
–
High tear resistance helps reduce damage
during installation.
–
Does not compromise on traditional DPM
performance.
–
Available in traditional sizes and thicknesses and
installed in the same way.
Visqueen EcoMembrane® DPM is suitable for use in concrete
floors, in accordance with clause 11 of CP 102: 1973, where there
may be capillary rise of moisture but not where it may be
subject to hydrostatic pressure. In such a circumstance,
Visqueen Self Adhesive Membrane should be used.
Where there is a risk that the ground may be waterlogged,
sub-soil drainage in accordance with CP 102 and BS 8102 should
be provided.
The effectiveness of EcoMembrane® will be reduced if it is
exposed to sunlight either during storage or when in use.
(see Storage and Handling)
Under normal operating conditions,Visqueen EcoMembrane® DPM
can be used in conjunction with underfloor heating, although
follow the advice of Visqueen’s Technical Support Service.
As indicated in paragraph 4.8 of Approved Document C, joints in
the membrane are sealed using the Visqueen DPM Jointing
System and Visqueen Zedex DPCs and cavity trays.
45
DAMP PROOF MEMBRANE
t
catio
n
E
R
Limite
Cer
ifi
d
B
Certificate No. No.112/04
Installation guideines
Visqueen EcoMembrane® DPM must be installed in
accordance with BRE Certificate No.112/04 and the following
guidelines.
REQUIRED COMPONENTS
Preparation for laying the membrane
Even though Visqueen EcoMembrane® has a high puncture
resistance to normal foot and site traffic, care should be taken
to avoid accidental damage on site. Similarly, where the base
is uneven, a blinding of soft sand of a thickness that will cover
all sharp projections should be used to avoid damage to the
membrane when it is being installed, and when the concrete
or screed is being laid.
VISQUEEN ZEDEX DPC
P3
P48
?
Jointing the EcoMembrane®
Adjacent sheets of the membrane should be overlapped
by at least 150mm and sealed using Visqueen Double
Sided Jointing Tape. The joint should then be secured
using 100mm wide Visqueen Girth Jointing Tape.
The membrane should be clean and dry at the time
of jointing.
H&S
✓
✓
BRE CERTIFICATE
✓
✓
Maintaining continuity
It is essential that the Visqueen EcoMembrane® is continuous
with the DPC in the surrounding walls. Where the DPM is
not at the same level as the DPC, the DPM should be taken
vertically and connected to the DPC so that damp proofing
is continuous. The DPM should also be continuous with any
DPCs to internal walls.
Special care must be taken to ensure continuity at corners.
To help achieve this, special pre-formed wall/slab corner units
are available from Visqueen Building Products. All laps must
be sealed using Visqueen Double Sided Jointing Tape and
Visqueen Girth Jointing Tape.
Punctures
Any tears or punctures in the membrane should be patched
using a piece of the same material sized to overlap at least
150mm beyond the extent of the puncture, the lap being
sealed with Visqueen Double Sided Jointing Tape and
Service pipe penetrations
Any penetrations for service pipes should be sealed
using Visqueen Top Hat Units. The base of the Visqueen Top
Hat Units should be sealed using Visqueen Double Sided
Jointing Tape and Visqueen Girth Jointing Tape.
NBS PLUS CLAUSES
✓
✓
Covering
Visqueen EcoMembrane® should be covered by a protective
layer (such as a screed) as soon as possible after installation.
The membrane should be sufficiently loosely laid against
upstands to ensure that the membrane is not stretched or
displaced when applying the screed or concrete. A minimum
thickness of 50mm screed is recommended.
When reinforced concrete is to be laid over the membrane,
the wire reinforcements or spacers must be prevented from
contacting the membrane. It is recommended that the
membrane be covered with Visqueen Protection Board or
50mm screed prior to placing the reinforcements.
When underfloor heating is to be installed, Visqueen recommend
that the barrier is positioned between the blinded hardcore and
the insulation to protect the installation from moisture and to
avoid any risk of overheating the membrane.
46
DAMP PROOF MEMBRANE
The EcoMembrane® DPM System
Storage and handling
Visqueen EcoMembrane®
Visqueen EcoMembrane® is supplied in rolls, shrink wrapped
on pallets, the wrapping bearing the manufacturers and
products names, the BRE identification mark and Certificate
number, details of the length, width and thickness, and the fact
that it is a Type “A” product as defined in BS EN 13967: 2004.
The material is not recommended for use where it will be
exposed to long periods of outdoor weathering. The rolls
should be protected from sunlight and stored under cover
before use.
When the weather is cold, Visqueen Double Sided Jointing
Tape and Visqueen Girth Jointing Tape should be kept in a
warm, dry place until needed. Installation is not recommended
below 5°C.
Dimension Properties
Thickness
250
300
500
Roll Width (m)
4
4
4
Roll length (m)
25
25
12.5
Colour
black
black
black
Property
Nominal Thickness of sheets (mm)
Test Description
0.25
0.30
0.50
Visible defects
BS EN 1850-2
None
None
None
Mass per
unit area
BS EN 1849-2
240 g/m2
265 g/m2
460 g/m2
Watertightness
BS EN 1928,
Method A
with pressure
of 2kPa
Pass
Pass
Pass
Resistance
to impact
BS EN 12691
Pass-30mm
-puncturing
tool
Pass-30mm
-puncturing
tool
Pass-30mm
-puncturing
tool
BS EN 1296, with
Durability against exposure period
ageing
of 12 weeks
followed by
Pass
BS EN 1928,
Watertightness
Method A
after ageing
with pressure
of 2kPa
Pass
Pass
BS EN 1847, with
exposure to
dilute alkali for
16 weeks
Pass
followed by
BS EN 1928,
Method A
with pressure of
2kPa
Pass
Pass
BS EN
12310-1
165 N
205 N
310 N
Resistance
to tearing
BS EN
12310-1
(Nail shank)
in Cross direction
170 N
215 N
315 N
19.4 N/mm2
370%
24.9 N/mm2
390%
18.5 N/mm2
370%
BS EN
12311-1
23.2 N/mm2
430%
23.7 N/mm2
430%
19.9 N/mm2
380%
BS EN 12730,
Method B
Pass with
20kg load
Pass with
20kg load
Pass with
20kg load
Durability
Against
chemicals
Watertightness
after exposure
Resistance
to tearing
(Nail shank) in
Machine
direction
Max Tensile stress
in Machine
BS EN
direction
12311-2
Elongation
Max Tensile
stress in
Cross direction
Elongation
Resistance to
static loading
Water Vapour Transmission Properties
* Equivalent to water vapour
permeability of:
250 µm 0.36 g/m2/day
300 µm 0.32 g/m2/day
500 µm 0.16 g/m2/day
47
**Equivalent to water vapour
resistance of:
250 µm 586 MNs/g
300 µm 682 MNs/g
500 µm 1390 MNs/g
Density of water
BS EN 1931
vapour flow rate*
4.20 x 10-9
kg/m2/s
3.71 x 10-9
kg/m2/s
1.91 x 10-9
kg/m2/s
Water vapour
resistance
factor**
3.14 x 105
3.29 x 105
3.92 x 105
BS EN 1931
DAMP PROOF MEMBRANE
Jointing System
REQUIRED COMPONENTS
The Visqueen EcoMembrane® Jointing System consists of:
–
–
Visqueen Double Sided Jointing Tape.
VISQUEEN ECOMEMBRANE
P41
The system is used for jointing:
VISQUEEN ZEDEX HIGH PERFORMANCE DPC
P12
–
–
–
?
Between sheets of Visqueen EcoMembrane® DPM.
Around Visqueen Top Hat Units.
To Visqueen Zedex DPCs and cavity trays.
Description
Visqueen EcoMembrane® Jointing System
For jointing adjacent sheets of Visqueen DPM and DPM to DPC,
Visqueen DPM Jointing System should be used. The system
comprises of the following:
Visqueen Double Sided Jointing Tape
A double sided adhesive strip which forms a tenacious bond
between sheets.
Visqueen Girth Jointing Tape
A self adhesive pressure sensitive tape used in conjunction with
Visqueen EcoMembrane® Jointing
System Usage
H&S
✓
✓
BRE CERTIFICATE
✓
✓
NBS PLUS CLAUSES
✓
✓
Research into damp proofing failures indicate a critical area is
where laps and joints in the damp proof membrane (and course)
are not properly sealed. Though this is easier to achieve with our
self adhesive membranes, it has always proved difficult on site,
with loose laid membranes. A combination of Visqueen Double
Sided Jointing Tape and Visqueen Girth Jointing Tape provide a
practical and effective solution. There is no setting time, and work
can proceed immediately after application.
Visqueen EcoMembrane® Jointing Procedures
Surfaces must be clean and dry. Adjacent sheets must be
overlapped by a minimum of 150mm. Visqueen Double Sided
Jointing Tape should be used to join adjacent DPM sheets.
The sheets should then be sealed by using 100mm wide Visqueen
Girth Jointing Tape.
Where the sheets have been perforated they should be patched
with sheets of identical thickness lapped at least 150mm beyond
the limits of the puncture and sealed with Visqueen Double Sided
Jointing Tape and Visqueen Girth Jointing Tape as per standard
lapping instructions above.
Technical Properties
Roll Length (m)
10
Roll Width (mm)
50
Roll Length (m)
33
Roll Width (mm)
100
48
DAMP PROOF MEMBRANE
Visqueen DPM to PIFA
Standard
DPM
TO PIFA STANDARD
Description
–
Conforms to PIFA standard 6/83A:1995.
–
High puncture resistance.
–
Proven performance over many years.
–
Withstands rough site handling.
–
Comprehensive range to satisfy most site
conditions.
–
Manufactured from the highest quality materials.
Visqueen DPM to PIFA Standard
Dimensional Details
Nominal Thickness
250mu, 300mu, 500mu
Gauge
1000(250mu), 1200(300mu), 2000(500mu)
Roll Length
25m(250mu), 25m(300mu), 12.5m(500mu)
Roll Width
4m(250mu, 300mu, 500mu)
Minimum Roll Weight
23Kg(250mu), 27.6Kg(300mu), 23Kg(500mu)
Physical Characteristics
Tensile Strength (BS2782:320A)
250mu (N/25mm) 90(min) (MPa) 14.4(min)
300mu (N/25mm) 108(min) (MPa) 14.4(min)
500mu (N/25mm) 180(min) (MPa) 14.4(min)
Elongation at Break % BS2782:320A)
*(56 days @ 80OC)
250mu unaged 500(min) aged* 250(min)
Tear Resistance (MOAT 27.5.4.1)
250mu (N)10(min) (N/mm)40(min)
Impact Strength Fold (f50,g)
250mu: 250(min) 300mu: 300(min)
500mu: 500(min)
Impact Strength Body (f50,g)
250mu: 500(min) 300mu: 600(min)
500mu: 1000(min)
Water Vapour Transmission
g/m2/24hr
250mu: 1.0(max) 300mu: 0.8(max)
500mu: 0.5(max)
10
Width (mm)
50
Roll Length (m
33
Width (mm)
100
Roll Length (m)
49
Visqueen Damp Proof Membranes are a high quality range of
polyethylene Damp Proof Membranes, available in Blue or Black
and produced to PIFA Standard 6/83A:1995.
Manufactured from high quality reprocessed low density
polyethylene (LDPE) Visqueen Damp Proof Membranes have
successfully prevented moisture penetration from floors for many
years. From our experience we have developed our own strict
quality and production management systems. These systems
which continuously monitor key performance criteria, along with
a strict selective raw material policy ensures a consistently high
quality DPM. Visqueen Damp Proof Membranes comply with the
relevant Building Regulations. Visqueen Damp Proof Membranes
should be used in conjunction with the Visqueen Jointing System
to ensure complete integrity of joins.
To maintain compatibility between damp proofing
components and avoid issues such as polymer plasticizer
migration, Visqueen strongly recommend the use of Visqueen
DPCs.
Contaminated Ground
On brownfield sites or where there is ground contamination
please seek further advice from Visqueen Building Products as use
of specialist Visqueen Gas Protection may be necessary.
Application
The extensive range of Visqueen Damp Proof Membranes means
that they are suitable for use in floors in most site conditions,
not subject to hydrostatic pressure. In these applications use
Visqueen Self Adhesive Membrane.
Visqueen DPM Jointing System
For jointing adjacent sheets of Visqueen DPM, DPM to DPC & DPC
to DPC, Visqueen Jointing System should be used.
The system comprises of the following:
A double sided adhesive strip which forms a tenacious bond
between sheets.
A self adhesive pressure sensitive tape used in conjunction with
TO PIFA STANDARD
DAMP PROOF MEMBRANE
DPM
Storage & Handling
Visqueen DPM is classified as non hazardous when used in
accordance with the relevant Codes of Practice (CP102 1973) and
PIFA Certificate No 1995/10. The product is chemically inert and is
not affected by acids and alkalis that may be present in the
sub-soils.
REQUIRED COMPONENTS
Installation
Visqueen DPM Usage
When used in accordance with the PIFA Certificate and the
relevant clauses of CP 102: 1973 in concrete floors not subject to
hydrostatic pressure Visqueen Damp Proof Membranes form an
effective barrier to the passage of moisture and water vapour
from the ground. The DPM must be continuous with the DPC in
the surrounding walls. Although Visqueen Damp Proof
Membranes have a high resistance to puncture they will not be
damaged by normal foot traffic, unless the base is smooth, a
surface of blinding or soft sand should be used to avoid damage
to the membrane both during installation and when the concrete
or screed is being laid. Visqueen DPM must be covered by a
screed or other protective layer as soon as possible after
installation. Care should be taken to ensure that the membrane is
not stretched or displaced when placing the concrete or screed
over the membrane. Sufficient allowance should be made to
avoid bridging (ie. creating areas of unsupported membrane)
during screeding operations at internal angles, etc.
Jointing Procedures
Surfaces must be clean and dry. Adjacent sheets must be
overlapped by a minimum of 150mm. Visqueen Double Sided
Jointing Tape should be used to join adjacent DPM sheets.
The sheets should then be sealed by using 100mm wide Visqueen
Girth Jointing Tape. Where the sheets have been perforated they
should be patched with sheets of identical thickness lapped at
least 150mm beyond the limits of the puncture and sealed with
VISQUEEN ZEDEX HIGH PERFORMANCE DPC
P12
P48
?
H&S
✓
✓
✓
NBS PLUS CLAUSES
✓
✓
DPM Jointing Detail (DM-01)
Also consider...
Visqueen BBA DPM
Visqueen Building Products also produced DPM with
BBA Accreditation, certificate number 94/3009.
Further details are available upon request
or visit visqueenbuilding.co.uk/dpm
BBA
BRITISH
BOARD OF
AGREMENT
ASSESSMENT OF PRODUCTS FOR CONSTRUCTION
CERTIFICATE No. 94/3009
Visqueen High Performance DPM
An extremely robust CPT based DPM with high tear
and puncture resistance. Suitable for applications
where unusually demanding site conditions
are anticipated.
50
DAMP PROOF MEMBRANE
The Damp Proof Membrane
for Tanking Applications
Visqueen Self Adhesive DPM
–
–
Suitable for use as a damp proof membrane in
horizontal and vertical applications.
Typical Properties
Tough high performance high density
polyethylene membrane provides resistance
to puncture and tearing.
Roll Length
20m
–
Superior adhesion helps correct installation.
Width
1m
–
Use with unique Visqueen Tanking Primer
Solution to obtain best performance.
Area per roll
20m2
Weight
32kg
–
BBA Certificate Number 01/3820.
Overall Thickness
1.5mm
Dimensional Details
Physical Characteristics
Description
Tensile Strength (N per 50mm) (BS 2782:320A)
Visqueen Self Adhesive Membrane is a two ply self adhesive
waterproofing system. It can be used as a DPM for both
horizontal and vertical applications.
Unaged
182
Heat Aged 56 days at 60°C
218
UV Aged for 500 hours QUV
216
Visqueen Self Adhesive Membrane has BBA Accreditation,
Certificate No. 01/3820.
Visqueen Self Adhesive Membrane prevents the ingress of
water and associated water-borne alkalis present in some
mortar and concrete.
Visqueen Self Adhesive Membrane should be used along with
Visqueen Tanking Primer Solution, which is a highly penetrative
moisture tolerant coating and provides the optimum surface to
receive Visqueen Self Adhesive Membrane.
Applications
Visqueen Self Adhesive Membrane is for use in vertical
tanking or horizontal self adhesive applications, such as
underground basements, lift pits or at high ground levels
when installed in accordance with BS8102. It is
recommended that substrates are always primed with
Visqueen Tanking Primer Solution, concrete, masonry or steel
at or below ground level. Adequate ventilation must be
ensured at all times during application.
Unaged
134%
Heat Aged 56 days at 60°C
160%
UV Aged for 500 hours QUV
170%
Water Vapour Resistance
(MNsg-1) (BS3177)
891
Water Vapour Permeability
(gm-2 day) (BS3177)
0.23
Tear Resistance
(Nail Tear) N (MOAT 27:5.4.1)
77
Tear Resistance (Trouser tear)
N (BS2782:360B)
49.8
Resistance to water pressure
(6 metre head) (MOAT 27:5.1.4)
no penetration
Visqueen Detailing Strip
300mm x 10m Gas Resistant two - ply self adhesive membrane.
Visqueen Tanking Primer Solution
Storage and handling
Visqueen Self Adhesive Membrane should be stored in
cartons, on end and kept dry. Visqueen Self Adhesive
Membrane is classified as non hazardous when used in
accordance with the relevant British Standards.
Visqueen Tanking Primer Solution to be stored in original
unopened containers in a cool dry area. Suitable protective
clothing should be worn when using.
51
Elongation at Break % (BS 2782:320A)
Dry Time
4-8 hours at normal temperature
Application Rate - concrete
4 - 6m2/l
Availability
5Ltr or 25Ltr
Visqueen Protection Board - Bitumen Impregnated
Thickness
3mm
Dimensions
1m x 2m
DAMP PROOF MEMBRANE
BBA
BRITISH
BOARD OF
AGREMENT
ASSESSMENT OF PRODUCTS FOR CONSTRUCTION
CERTIFICATE No. 01/3820
Typical External Tanking Section (LP-01)
REQUIRED COMPONENTS
VISQUEEN ZEDEX DPC
P3
VISQUEEN ZEDEX PRE-FORMED CAVITY TRAY UNITS
P8
VISQUEEN DETAILING STRIP
✓
✓
AGRÉMENT CERTIFICATE
✓
Installation Guidelines
NBS PLUS CLAUSES
✓
Installation should be in accordance with BBA Certificate No.
01/3820, BS Code of Practice 102 and BS 8102.
✓
All surfaces to which the membranes are to be applied should
have a smooth finish, be dry and free from dust, loose particles
and frost. The surface should then be sealed using Visqueen
Tanking Primer Solution and allowed to dry thoroughly.
Vertical surfaces of brickwork and blockwork should be dry and
rendered to give an even surface. Brickwork and blockwork not
rendered should be pointed to give a smooth surface without
sudden changes in level.
All lap joints should be a minimum of 150mm and must be
pressed and rolled to form a continuous bond and ensure
watertightness.
–
The membrane can be installed in normal site conditions
provided the air temperature is not below 5°C.
–
On external applications the membrane must be
protected against puncture during backfilling, or
subsequently by the backfill by using Visqueen
Protection Board.
–
For internal angles, fillets and detailing strips must be
used (see typical details for more information).
–
Visqueen Detailing Strip should be used to reinforce
all angles and corners.
–
For internal tanking, the horizontal membrane should be
loaded with screed or concrete to resist uplift pressure.
The vertical membrane should be protected with a brick
or block wall set a minimum of 50mm from the
membrane. The cavity should be filled with compacted
mortar to support the membrane and resist water pressure.
After installation the membrane should be covered as soon as
possible with a sand/cement screed or other protective layer.
Visqueen Self Adhesive Membrane must be continuous with the
DPC in surrounding walls.
Do not apply the Visqueen Tanking Primer Solution below 5°C,
during rain and snow or when fog or mist are present.
Very porous surfaces will require two coats.
Typical details showing good installation practice are available
from our web site.
52
DAMP PROOF MEMBRANE
Visqueen TorchOn Tanking
Membrane
TORCH ON TANKING
Description
–
Robust tanking membrane for heavy
duty applications.
–
Visqueen TorchOn Tanking is a two layer
system when used as a tanking membrane
below ground.
–
Visqueen TorchOn Tanking membrane can
be used as a one layer system at or above
ground level but all laps must be a minimum
of 150mm.
Visqueen TorchOn Tanking Membrane is a robust waterproofing
membrane, used for heavy duty tanking applications.
Visqueen TorchOn Tanking Membrane can be used both vertically
and horizontally above and below ground level to prevent the
ingress of water and water-borne alkalis present in some mortar
and concrete. Visqueen TorchOn Tanking Membrane should be
used along with Visqueen Tanking Primer Solution, which is a
highly penetrative moisture tolerant coating and provides the
optimum surface to receive Visqueen TorchOn Tanking
Membrane. The primer must be applied at least 12 hours prior to
application and must be totally dry.
Application
Visqueen TorchOn Tanking Membrane is for use in vertical or
horizontal applications, such as underground basements, lift pits
and retaining walls. It is recommended that substrates are always
primed with Visqueen Tanking Primer Solution.
Visqueen TorchOn Tanking Membrane can be applied to concrete,
smooth brick, blockwork and steel.
Storage & Handling
Visqueen TorchOn Tanking Membrane should be stored in
cartons, on end and kept dry. Visqueen TorchOn Tanking
Membrane is classified as non hazardous when used in
accordance with the relevant British Standards. Visqueen Tanking
Primer Solution should be stored in its original unopened
container in a cool, dry area. Suitable protective clothing should
be worn when using these materials. Adequate ventilation must
be ensured at all times during application.
Visqueen TorchOn Tanking
Dimensional Details
Tensile Strength
(N 500mm-1) long 845 trans 622
Elongation at Break
Long 40%, Trans 42%
Resistance to Tear (nail tear)
(N) long 374, Trans 325
Puncture Resistance 7Kg Load via
10mm
Diameter steel ball
Pass
Mullen Burst Strength
2000 KPA
Product Data
Dimensions
1m x 8m
Nominal Weight
34kg
Thickness (± 10%)
3mm
Visqueen Tanking Primer Solution
53
Dry Time
4-8 hours at normal temperature
Application Rate - concrete
4 - 6 m2/l
Availability
5Ltr or 25Ltr
DAMP PROOF MEMBRANE
TORCH ON TANKING
Installation Procedure
REQUIRED COMPONENTS
Ensure that the surface to be treated is free from loose
particles, dry and frost free. Installation should be in
accordance with BS 8102. All surfaces should be sealed using
Visqueen Tanking Primer Solution and allowed to dry
thoroughly. The membrane must be fully bonded to the
prepared substrate by using the torch-on application method.
Side laps should be a minimum of 100mm and end laps must
be a minimum of 150mm and the work should be set out with
staggered laps between first and second layers. Ensure that a
constant flow of bitumen is maintained across the whole width
of the roll and that a bead of bitumen is extruded from each
edge which demonstrates that a good seal has been obtained.
On vertical areas, the membrane should be cut to the
appropriate length, bonded to the horizontally applied
membrane and torch applied upwards.
VISQUEEN SELF ADHESIVE DAMP PROOF MEMBRANE P51
VISQUEEN PROTECTION BOARD
THE FOLLOWING ITEMS ARE AVAILABLE TO VIEW
ONLINE OR TO DOWNLOAD FROM
H&S
✓
✓
On external applications Visqueen Protection Boards
should be used.
Standard Detail (LP-02)
NBS PLUS CLAUSES
✓
✓
Standard Detail (LP-03)
54
DAMP PROOF MEMBRANE
Visqueen Liquid DPM
Description
–
Designed to provide a tough and impermeable
coating to prevent damp penetration.
Visqueen Liquid DPM is a multi-purpose liquid damp proof
membrane that provides an impermeable coating for floors, walls
and roofs. Visqueen Liquid DPM is a bitumen based solvent free
emulsion Liquid DPM suitable for horizontal and vertical
applications. It combines excellent adhesive, elastic and
waterproofing properties.
Applications
Visqueen Liquid DPM is suitable for use as a general purpose
liquid damp proof membrane for most applications.
THE FOLLOWING ITEMS ARE AVAILABLE TO VIEW
ONLINE OR TO DOWNLOAD FROM
✓
✓
Size Availability
Available in 25 litre containers.
H&S
Storage & Handling
Store in original unopened containers in a cool dry area.
Visqueen Liquid DPM should be stored in sealed containers
between 5°C and 35°C. Avoid frost do not allow to freeze.
A shelf life of 12 months can be expected if storage conditions
are observed. Suitable protective clothing should be worn
when using. In the event of contact with the skin, wash with a
proprietary hand cleaner followed by soap and water. In the
event of contact with the eyes flush with copious amounts of
water for at least 10 minutes. Medical attention should be sought.
In the event of ingestion, prompt medical attention should be
sought. Do not induce vomiting.
NBS PLUS CLAUSES
✓
✓
Installation
Visqueen Liquid Damp Proof Membrane
55
Specific Gravity (20°C)
Approx. 1.00 g/ml
Appearance
Brown when wet, Black
when dry
Dry Time
varies depending on
temperature & humidity
Application Rate e.g. floors,
bridge abutments
0.5 m2 per Litre - 25 ltr covers 50 m2
(subject to porosity of substrate)
Ensure that the surface to be treated is free from dirt, grease,
moss, etc. Porous surfaces should be primed using a 1:1 mix of
Visqueen Liquid DPM and water. Visqueen Liquid DPM can be
applied to damp but not wet surfaces. Apply using a brush or soft
bristle broom. Do not heat or dilute for optimum performance.
Visqueen recommend a minimum of two coats per application.
Always ensure that the first coat is completely dry before applying
a second coat. Typically a second coat should not be applied
within 8 hours of the first coat, although actual drying times vary
depending upon conditions and porosity of surface.
If a third coat is to be applied it is recommended that at least 16 24 hours is left between the second coat and the application of
the third coat.

Damp Proof Membranes Brochure

Transcription

Similar documents

MusselBound Install

Document

Diffusion and Osmosis Worksheet

Structure of Cell Membranes (Insane in the membrane)

Entertainment/Leisure Only

- Membrane vacuum press

POLYGLASS® U.S.A., Inc. Corporate Office 1111 West Newport

BIOCHEMISTRY IN PERSPECTIVE Organelles and Human Disease

OutDry technology achieves a fully waterproof, windproof and