Quick action roller shutters in aluminium or PVC

Quick action roller shutters in aluminium or PVC
Cost effective, robust and easy to service
Quick action roller shutters
in practice
opening times minimize
eventuel drafts and there­
fore contribute to main­
taining the efficien­cy of
the workforce. And thirdly:
­special quick action double
shutters are therefore not
­required to supple­ment
a conventional roller or
­sectional door.
Existing sectional doors or
roller shutters can be easily
combined with PVC speed
roller doors. They guarantee
extreme short opening and
closing times and reduce loss
of energy and reduce draft.
2
11.2010
Quick action roller shutters
with genuine sprinter
­qualities
They open and shut much
quicker than conventio­nal
roller shutters. The result:
The more an external open­
ing is used, the higher the
energy saving. In addition,
considerably shortened
Type overview
Functionality and cost,
designed for your operation
Alu-quick action roller shutters
Just as there is no standard
in means of transport, there
is no standard shutter clos­
ing system – different com­
mercial processes require
differentiated shutter solu­
tions. The basic require­
ments are fulfilled by our
versatile quick­action roller
shutter range.
Novo Speed Alu
External shutter
in aluminium profiles
Eco Speed Alu
External shutter
in aluminium profiles
Opening speed of ca. 2.0 m/sec.
Door dimensions up to max. 8000 x 8000 mm
Wind resistant according to DIN, thermal insulating
Installation of view and ventilation slats possible
Opens in up to 0.75 m/sec.*
Door dimensions up to max. 5000 x 8000 mm
Wind resistant according to DIN, foam­filled thermal insulating
Installation of view and ventilation slats possible
* Average opening speed of ca. 0.45 m/sec.
A great variety of types
permits made to order
solutions
The quick action roller shut­
ters can be provided in alu­
minium or PVC as required.
Whereas Alu designs are
almost exclusively used as
external shutters because
of their stable shutter rein­
forcement and high insula­
tion qualities, PVC roller
doors are used both exter­
nally and internally. The
desired commercial require­
ment is always decisive.
PVC quick action roller doors
Novo Speed Flex
Internal door in PVC
Novo Speed Economic
Internal door in PVC
Novo Speed Basic
Internal door in PVC
Novo Speed Heavy
External or internal door
in PVC
11.2010
Subject to combination with
upstream exterior gate (winter
operation)
Opens in up to 2.0 m/sec.
Door height up to 5000 mm
Door size: hard edge up to 20 m2, flex edge up to 17.5 m2
Doorleaf in 1.2 mm thick polyester reinforced PVC
with viewing section in transparent plastic at eye level
Wind resistant up to 5 Beaufort
Opens in up to 1.5 m/sec.
Door size up to 9 m2
Doorleaf in 0.7 mm thick polyester reinforced PVC
with viewing section in transparent plastic at eye level
Wind resistant up to 3 Beaufort
Opens in up to 1.5 m/sec.
Door dimensions up to 4000 x 5000 mm
Doorleaf in 1.2 mm thick polyester reinforced PVC
with viewing section in transparent plastic at eye level
Wind resistant up to 5 Beaufort
Opens in up to 1.5 m/sec.
Door dimensions up to 6000 x 6000 mm
(larger dimensions upon request)
Doorleaf in 3.0 mm thick polyester reinforced PVC
with viewing section in transparent plastic at eye level
Wind resistant up to 8 Beaufort
All presented speed roller doors
apply to the regulation as stipulated
in the DIN EN 13241-1.
3
Quick action roller shutter Novo Speed Alu
opens in ca. 2.0 m/sec. – roller shutter and quick action shutter in one
Novo Speed Alu quick action roller shutter
The quick action roller shutter Novo Speed Alu combines the advantages
of an aluminium roller shutter with those of a PVC roller door. As a fullyfunctioning external shutter with corresponding resistance to weather and
wind forces, with break in protection and good heat insulation, it opens at
a speed that is normally only achieved by PVC roller doors.
Aluminium slats, extruded,
anodized in E6/EV1, wall thickness
1.2 mm, double thermal insulation,
ca.20 mm thick, sliders right and
left, sound insolating rubber pro­
files between the slats.
Advantages of the Novo Speed Alu quick action roller shutter
• Solidandself-supportingsideguiderails
• Smoothandrapidshuttermovementusingfrequencymodulation
techniques
• Large,side-mounted,maintenance-freetensionspringsinthe
shutter frame
• Easyremovalandreplacementofindividualrollershutterslats
• HighwindresistancetoDIN
• Sideservicinghatch(allmoveablecomponentseasilyaccessible)
• Verysafeoperationwithintegratedphotocellandcontactedge
Aluminium slats (including side
guide rails) are also available in
RAL colours. For improved insula­
tion value polystyrene insertion
can be applied.
Construction of the shutter
Easily installable side frames consisting of galvanized steel sheet painted
to order (can be delivered in stainless steel for the food sector). The drive
is provided by a drive motor that is connected directly to the winding shaft.
Sidetensionspringsintegratedintotheframesupportthedrivemotorand
at the same time ensure that the weight of the shutter is balanced.
Sight and ventilation slats can
be incorporated at any time.
Shutter reinforcement
Extruded aluminium slats, left and right fitted with sliding pieces. Between
the individual slats a specially designed rubber profile is inserted for sound
absorbing purposes. The additionally integrated side tension springs keep
the shutter slats under tension in the guide rails. In this way the normally
loud operational noises are reduced considerably.
Control
The control with frequency converter permits
smooth and rapid duty operation in both top and
end positions. According to the requirements on
the shutter the frequency converter permits the
opening and closing speeds to be programmed.
Control can be easily extended (e.g. for locks
and traffic light control or for connection to instal­
lations and controls provided by the customer on
site). Operational or error messages are displayed
on a plain text unit on the control box.
Manual operation
In case of power failure, the door can be opened with an emergency hand
crank (approx. 300 mm long). On request: emergency release activated
with the Bowden cable on the inside.
Safety in accordance with DIN EN 13241-1
• Electricalclosingedgesafety
• Stationarysafetyphotocell
Lightcurtainunits,inductionloops,radarmotiondetectors,heightadjustable light beams, operating or traffic light controls as well as other safety
elements can be connected without difficulty.
Options (additional charge)
• Emergencyunlockingbyinternalbowdencable
• Lightcurtainunits
• Driveandshaftcladding
• RALcolourslatsandsideguiderails
• Otherprotectivedevices
• Operatione.g.bymeansofpushbuttons,pullswitches,
light beams, motion detectors
• Inductionloopsorradioremotecontrol,etc.
• Intermediatestop
• Airlockcontrolincombinationwithsecondshutter
• Connectiontoatrafficlightunit
min. 1500 to max. 8000 mm
min.2000tomax.8000mm
min.400resp.450mm(withcover)
min.250resp.350mm(withcover)
min.600to900mm
approx. 2.0 m/sec.
approx. 0.7 m/sec.
230V/50Hz/8A/1.1kW
400V/50Hz/1A/2.2kW
24 Volt
IP 54
selectable right or left
galvanized
11.2010
Specification
Width
Height
Sideroomrequirementdriveside
Sideroomrequirementnon-driveside
Headroomrequirement(acc.tosize)
Opening speed
Closing speed
Connection–upto5000x5000mm
Connection–upto8000x8000mm
Control voltage
Protection type
Drive
Sliderails
We are authorised to carry out all necessary tests according to UV V!
4
Quick action roller shutter Eco Speed Alu
opens up to 0,75 m/sec. – foam filled thermal insulating
Novo Speed Alu quick action roller shutter
The quick action roller shutter Eco Speed Alu is about three times quicker
than a comparable conventional roller shutter, nevertheless very competitive. The slats are filled with PU hard foam. This ensures high surface
stability and insulation.
Aluminium slats with optimized
profile, winding and guide char­
acteristics for low­noise and low­
friction operation, with plastic end
pieces against sideways movement
and for easy operation.
Advantages of the Eco Speed Alu quick action roller shutter
• Robustdrivetechnologywithoutexpensiveelectronics
• Simpleinstallationandoperation
• Automaticrollcarriagesystemforoptimallintelsealing
• Speciallydevelopedprofileshapeforhigh-qualityopticalcharacteristics
• Thenon-adhesivebindingofshellandPUhardfoamcoremeanshigh
surface stability and very good insulating qualities
• Robustguiderailsingalvanizedsteelwithlow-wearplasticstripsfor
quiet roller shutter operation
• Largedimensionself-aligningballbearingforsupportingthewinding
shaft
• Flexiblerubbersealingcompensatesforfloorunevenness
Aluminium slats can be delivered
on request with a colour coated surface. Independently of the selected
colour the termination profile for
shutter widths over 4500 mm is
standardinRAL9002or9006.
Construction of the shutter
Galvanized guide rails for welded assembly or for non­welded assembly
with steel brackets, with low­wear PVC strips for quiet roller shutter
operation.Steelwindingshaft,basedonlarge-dimensionself-aligningball
bearings, supported on mounting brackets, minimum diameter of 168 mm
for problem­free support of reinforcement. Console attachment by means of
dowels, screws or welding assembly.
Aluminium slats with double glazed
window section, two­layer plastic
insert (not clear glass), max. 5
glazed slats per shutter.
Roller shutter reinforcement
Hinge-typelinkedslats,designedtodrainwater,protectedagainstmovement by side­mounted end pieces. The roller shutter reinforcement has
mountings fixed to the winding shaft, its bottom being
reinforced with a bottom profile dimensioned according to
requirements, with flexible rubber sealing to compensate
for floor unevenness.
Modified drive and automatic start
system for enhanced sealing.
Control
Standardmodularshuttercontrolwith24Vcontrolvoltage, TÜV and VDE tested, with sockets for 400/230 V
mains.Operationviamembranepush-buttonsOn-Stop-Off
in dead man control. With an additional module the con­
trol can be equipped for automatic functioning. Naturally all the normal
operating and safety devices for the roller shutter can be added, such
as key switch, pull switch, radio, connecting blocks, light beams, etc.
Drive
Specialdrivewithreducedclosingspeedtopreventaccidentsanddamage.
Options (additional charge)
• Emergencyoperationwithemergencyhandchainfromthefloor
• Slatswithcolourcoatingavailableonrequest
• Firmlyintegratedtopsealingagainstheatlossanddrafts
• Faciablindifsufficientheadroomisnotavailable
• Securityagainstbreakinbyliftingshutterreinforcement
• Standardpassdoorwithswingingorfixedsidesection
• Operationbykeyswitch,pushbutton,radio,connectingblocks,
light beams, etc.
• Connectiontoatrafficlightunit,hazardflashers,etc.
Specification
Width
Height
Sideroomrequirementdriveside
Sideroomrequirementnon-driveside
Headroomrequirement(acc.tosize)
Opening speed
Closing speed
Connection
Control voltage
Protection type
Drive
Guide rails
min. 1500 to max. 5000 mm
min.2000tomax.8000mm
min.280mm
min.170mm
500to680mm
up to 0,75 m/sec. *
approx. 0.23 m/sec.
400VDS/50Hz/6A/2.2kW
24 Volt
IP 54
selectable right or left
sendzimir galvanized
11.2010
* Average opening speed of ca. 0.45 m/sec.
We are authorised to carry out all necessary tests according to UV V!
5
PVC quick action roller door Novo Speed Flex
Innovative solution for interior areas – opens in up to 2 m/sec.
Novo Speed Flex quick action door
The new Novo Speed Flex PVC high speed rolling door is highly flexible in
respect of two features:
• universal applicability including, the food industry, transport equipment,
for logistics companies, in clean rooms, etc.
• innovative technical concept resulting in high performance combined
with space saving installation.
In addition the door is exceptionally light, easy and quick to mount and
­especially easy to maintain.
Advantages of the Novo Speed Flex PVC-high speed rolling door
• Installation friendly design: aluminium sliders manufactured in one piece,
thus light weight and quickly mounted. Door leaf assembly with the
unique “click system”. Many components come pre-mounted.
• Lower beams for interior doors optionally come in a more flexible design
and are more resistant to damage from vehicles! They can also be de­
livered in aluminium for higher surface stability and wind resistance.
• The doors are self threading after collision.
• The complete width and height
of the door has an especially
­compact, space saving construc­
tion: side guide rails are self
­supporting, mounting is done
­using the floor mounting plate
and the ­upper console.
• A tubular motor built in the
­winding shaft has an easily
­accessible service hatch for
quick main­tenance without
having to remove the motor.
• A light curtain unit integrated
in the rails (up to a height of
2500 mm), protects persons,
­vehicles and transported goods
from damage.
Construction / materials
• Aluminium winding shaft
• Guide rail aluminium profile with
integrated light curtain
• Door leaf made of 1.2 mm strong,
reinforced polyester PVC, view
section made of transparent
­plastic
• Lower end profile is optional in
a more flexible design or as alu­
minium bars. Each comes with
rubber seals reaching to the
floor with a Break-Away-System
Dimensions / space requirement
• Clear opening for wind strength
5 Beaufort max. 4250 x 5000 mm
• Side space on the non-drive side
(winding shaft height) 160 mm
• Side space drive side 160 mm
• Space above door: ca. 450 mm
Drive / speed
• Electric motor with max. 2.0 kW
(optional right or left side)
• Opening speed
up to 2.0 m/sec.
• Closing speed
ca. 0.5 m/sec.
• Supply voltage 3~NPE / 230 V /
50 Hz / 16 A (other voltages
­possible)
• Protection class IP 65 (drive)
• Temperature range 0-40° C
• Duty cycle 60 % ED
Control
Control with frequency inverter for
smooth and rapid start, as well as
easy movement into the end posi­
tion. The opening and closing
speeds are programmable with
the frequency inverter. Operating
buttons are integra­ted in the rails.
­Control is easily expandable (i.e. for
lock ­control or traffic light control or
for connecting to available systems
and controls). Operating and fault
messa­ges are shown in the display
on the switch box.
Safety
• Safety brake in the drive
• Light curtain up to a height
of 2500 mm is integrated in the
guide rail. A photo barrier is avail­
able for doors up to sizes of 12 m 2
• Viewing section at eye level for a
clear view and a brighter interior
room
• Hand crank operation in case of
power failure
Site prerequisites
• Power supply prior to mounting
must be up to ca. 500 mm within
the main switch box
• Lockable main switch
• Compliance with required size
• Stable flat wall or steel substruc­
ture for mounting the door
Options / accessories
• Operation by buttons, pull switch,
sensors, radar, induction loop or
radio (other options on ­request)
• “Half Height Stop“ (as personnel
passage point)
• Lock control in combination with
another door
• Battery operation for opening the
door in case of a power failure
­(also automatic)
• Connection to a traffic light (red/
green or red and green)
• Door leaves available in colors:
black, grey, blue, yellow, orange,
red and white
• Guide rail and cover in RAL of
your choice
Flex Edge, maximum 3500 x 5000 mm
6
Hard Edge, maximum 4250 x 5000 mm
11.2010
• Option: operating panel including
the complete wiring is integrated
in the rails.
PVC quick action roller doors
for external and internal use
Novo Speed Economic
Energy-saving quick action roller
door especially cost-effective solution for internal areas up to 9 m²
Steel winding
shaft
0.7 mm PVC,
fabric reinforced
Aluminium
hinge profile
Pushbutton (OPENSTOP-CLOSE)
Vision section
Galvanized
guide rail
Light aluminium
bottom bar
Break-AwaySystem
Advantages
• Wind resistant to 3 Beaufort
• No buffer springs
• Opens in up to 1.5 m/sec.
• Door leaf 0.7 mm thick
• Vision section
• Light bottom bar with BreakAway-System
• Aluminium hinge profile
• Rubber bottom seal
• Brush insert in side guide rails
Construction / materials
• Winding shaft in galvanized steel
• Guide rails in galvanized steel as
U-profile with brush inserts
• Door curtain in 0.7 mm thick,
poly­ester reinforced PVC (black,
grey, blue, yellow, orange, red,
white, green or brown) with alu­
minium-reinforcement profiles,
transparent vision section
• Bottom bar in aluminium (E6/
EV1) with rubber seal to floor
with Break-Away-System
• Hand crank operation in case
of power failure
Electrical drive / speed
• Electric motor with 0.45 kW
(optional right or left)
• Opening speed up to
1.5 m/sec.
• Main voltage
3N~400V/50Hz/16 A
• Protection type IP 54
• Temperature range 0-40°C
Operation/control
• Pushbutton “OPEN-STOP-CLOSE”
Safety
• Break-Away-System in bottom bar
(impact resistant, no emergency
stop)
Novo Speed Basic
Energy saving quick action
roller door for internal use
up to 4 x 5 m
Electrical drive
Steel winding
shaft
Aluminium
hinge profile
Vision section
Control box with
pushbuttons
Galvanized
guide rail
Safety
photo cell
Bottom bar
in aluminium
with safety
edge
Advantages
• Wind resistant to 5 Beaufort
• No buffer springs
• Opens in up to 1.5 m/sec.
• Doorleaf 1.2 mm thick
• Vision section
• Aluminium hinge profiles
• Safety photo cell
• Closing edge safety,
self monitoring
• Rubber sealing on floor
• Brush insert in side guide rails
Construction / materials
• Winding shaft in galvanized steel
• Side guides in galvanized steel as
U-profile with brush sealing
• Door curtain in 1.2 mm thick,
­polyester reinforced plastic
(black, grey, blue, yellow, orange,
red or white) with aluminium
r­ einforcement profiles, viewing
sections in transparent plastic at
a height of 1200-2200 mm
• Bottom bar in aluminium (E6/
EV1) with rubber seal to floor
Electrical drive / speed
• Electric motor
(optional right or left)
• Opening speed up to
1.5 m/sec.
• Main voltage
3N~400 V/50 Hz/16 A
• Protection type IP 54
• Temperature range 0- 40 °C
• Duty cycle 60% ED
• Permanent-ON-pushbutton
• Service switch for mounting and
maintenance
• LED-display for rapid fault finding
Safety
• Unroll security in motor
• Safety edge (self monitoring)
in bottom bar
• Safety photo cell on the side
guide rails (at a height of 400 mm
standard)
• Manual operation on power cut
Operation / control
• Pushbutton “OPEN-STOP-CLOSE”
• All pole main switch turn off
• Hold-open time adjustable from
5 to 80 seconds
Novo Speed Heavy
Energy saving quick action roller
door in heavy manufacture, also
for external use up to 6 x 6 m Subject to combination with upstream
­exterior gate (winter operation)
Electrical drive
Steel winding
shaft
Aluminium
hinge profile
Vision section
Control box with
pushbuttons
Galvanized
guide rail
11.2010
Safety photo
cell
Bottom bar
in aluminium
with safety
edge
Advantages
• Wind resistant to 8 Beaufort
• No buffer springs
• Opens in up to 1.5 m/sec.
• Tensioning system
(according to door size)
• Door leaf 3 mm thick
• Vision section
• Aluminium hinge profiles
• Safety photo cell
• Safety edge, self monitoring
• Rubber bottom seal
• Brush insert in side guide rails
Construction / materials
• Winding shaft in galvanized steel
• Side guides in angled, galvanized
steel profiles with brush inserts
• Side tensioning system (accord­
ing to door size) for tensioning at
each opening condition
• Door curtain in 3 mm thick,
polyester reinforced PVC (grey,
yellow, orange, green or blue)
with aluminium reinforcement
profiles, transparent vision
­section
• Bottom bar in aluminium (E6/
EV1) with rubber seal to floor
Electrical drive / speed
• Electric motor
(optional right or left)
• Opening speed up to
1.5 m/sec.
• Main Voltage 3N~400V/50Hz/16 A
• Protection type IP 54
• Temperature range 0-40°C
• Duty cycle 60% ED
• Hold-open time adjustable
• Permanent-ON-pushbutton
• Service switch for mounting and
maintenance
• LED-display for rapid fault finding
Safety
• Unroll security in motor
• Safety edge (self monitoring)
in bottom bar
• Safety photo cell on the side
guide rails (at a height of 400 mm
standard)
• Manual operation on power cut
Operation / control
• Pushbutton “OPEN-STOP-CLOSE”
• All pole main switch turn off
7
Novoferm. On-site. Direct. Europe-wide.
The Novoferm Group is one of the leading European system suppliers of doors, garage doors, frames and operators. We offer
a large range of products and services for private, commercial and industrial applications. All our products are manufactured
according to state-of-the-art technology and highest quality standards. We therefore integrate maximum functionality and
­innovative design. We manufacture our products in various international locations and with our Europe-wide sales network
we are always able to deal with you - wherever you are!
Your Novoferm distribution partner:
Right reserved to dimensional and constructional changes
Novoferm Vertriebs GmbH
Schüttensteiner Strasse 26
46419 Isselburg (Werth), Germany
Phone:0 28 50 9 10-700
e-mail:vertrieb@novoferm.de
www.novoferm.de