CW-S11
Transcription
CW-S11
CW-S11-VN T y. Thank you for purchasing the INAX product. Before using, please read this Operation and Installation Manual completely in oder to use this product properly and ensure its lasting operation. After reading this manual, store it safely. Note for installer: Please give this manual to the customer after installation. 1. 2. ra. 2 WxHxD use for two-piece WC Use for one-piece WC Remove the existing toilet seat and cover 1. By using a wrench or other tool, release the nuts on both side of the toilet bowl. 2. Remove the toilet seat and cover. Do not use tools to tighten nuts. 1. Sit down on the seat . 2. For Shower (or Bidet), turn slowly the Shower control knob (or Bidet control knob) to maximum order to obtain full washing performance or adjust the water volume according to your need. 3. To stop washing, turn the Shower (or Bidet) control knob back to [CLOSE]. Bidet control knob Shower control knob Detach the cover in the direction as shown. Shower: Wide rinsing Check whether Shower and Bidet knob is open simultaneously. Bidet : 5 holes
Similar documents
Yokohama Office
E Continue the elevated walkway and come down to the street level. Pass by Gento and Blitz and use the next crosswalk. Then you arrive at Yokohama Blue Avenue Building!
More information