with small illustrations (size ~ 2 MB)

Transcription

Last modified - 04.10.2016
Go to offer on web-site
AZIMUT ATLANTIS 50, 2017
price in Europe: 580 000 EUR
Technical Characteristics
Length overall: 16.30 m
Waterline lenght: 12.12 m
Beam overall: 4.42 m
Beam: 4.30 m
Draft to keel: 1.30 m
Height above waterline: 3.35 m
Displacement: 20.92 t
Dry displacement: 17.50 t
Engines: 2 x 600 hp (442 kW) CUMMINS QSC
8.3
Maximum speed: 32.00 knots
Cruising speed: 28.00 knots
Azimut Yachts Montenegro
Tivat, Porto Montenegro, Tara Building, T4
tel: +382.69.130.540
Web: www.azimutyachts.me
Fuel capacity: 1700 l
Water capacity: 420 l
Holding tank capacity: 150 l
Cabins: 2/3
Berths: 4/6 + 2
Head compartments: 2
Building material: VTR/GRP
Exterior styling & concept: Neo Design
Interior Designer: Neo Design & Azimut
Yachts
Builder: Azimut Yachts (Italy)
The official distributor
of Azimut Yachts (Italy)
in the Republic of Montenegro
Photos
Exterior
Exterior
Exterior
Swim platform
Swim platform
Stern garage
tel: +382.69.130.540
Cockpit (Coupe version)
Cockpit, aft sunbed (Open version)
Cockpit
Cockpit
Cockpit
Cockpit
tel: +382.69.130.540
Cockpit
Salon on the main deck (Coupe version)
Salon on the main deck (Open version)
tel: +382.69.130.540
Salon on the main deck (Open version)
Open maindeck
The salon on the main deck (Open version)
Control
Kitchen set
Kitchen set
tel: +382.69.130.540
Master cabin
Bathroom in the master cabin
VIP cabin
Guest cabin
tel: +382.69.130.540
Layouts
Top view
Main deck
Lower deck
tel: +382.69.130.540
Technical Characteristics
Standard specification
Length overall: 16.30 m
(incl. pulpit)
Propulsion system summary Engines
Waterline lenght: 12.12 m
(at full load)
Beam overall: 4.42 m
Beam: 4.30 m
(at main section)
Draft to keel: 1.30 m
(incl. props at full load)
Height above waterline: 3.35 m
Displacement: 20.92 t
Dry displacement: 17.50 t
Engines: 2 x 600 hp (442 kW)
CUMMINS QSC 8.3
Maximum speed: 32.00 knots
(at half load)
Cruising speed: 28.00 knots
(at half load)
Fuel capacity: 1700 l
Water capacity: 420 l
Holding tank capacity: 150 l
Cabins: 2/3
Berths: 4/6 + 2
Head compartments: 2
Building material: VTR/GRP
Exterior styling & concept: Neo
Design
Interior Designer: Neo Design &
Azimut Yachts
Builder: Azimut Yachts (Italy)
Regulations UNI ISO 8666
The levels of performance described apply to
a standard craft (with standard equipment
installed) with clean hull, propeller and rudders.
Moreover, it is specified that such levels of
performance were achieved under favourable
sea and wind conditions (1 on the Beaufort
scale and 1 on the Douglas scale); in the case
of diverse or less favourable sea conditions
performance levels may vary considerably.
EC Approved
Azimut reserves the right to modify the specification and characteristics of its vessels at any time.
tel: +382.69.130.540
Manufacturer Cummins
Model QSC 8.3
Max. power 2x 442kW - 600hp
Propulsion V drive
Performance
Maximum speed (*) 32 kts
Cruising speed (*) 28 kts
Maximum speed consumption (*) 247 l/h
Cruising speed consumption (*) 17
Characteristics
Hull: made with the infusion method,
vinylester resin on the outer layers.
Architecture with floors and semi-structural
hawk made with the infusion method, with
PVC sandwich. Deep V hull, variable
geometry, 15° deadrise astern.
Deck: made with the infusion method, with
PVC
sandwich
Painting: ISO neopentyl glycol gelcoat
Internal division:
Owner's cabin with head
VIP cabin
VIP cabin / living area head
Galley
Lower saloon
Furnishings:
External cushions in closed cell and dryfill,
covered in synthetic fabric with stain
protection treatment
Internal cushions with removable cotton
covers
Headboard and bed surround covered in
eco-leather
Furniture, doors and wall coverings in
reconstituted “striped walnut” veneer and
varnished finishes
Wall paneling covered in technical fabric
Carpeted floors
Ceilings covered in technical fabric
Venetian blinds
The boat description, characteristics and
performance levels given in this brochure are
not intended as public declarations of the
specific characteristics. They are merely an
indication and do not therefore constitute an
element of evaluation of any type with
regards the conformity of the boat, in
accordance with Directive EC 99/44. The
contents (words or photographs) of this
brochure are not binding for the boatyard,
so the customer must specifically agree the
characteristics of the boat with the dealer at
the time of ordering. The manufacturer
reserves the right to modify the
characteristics of its boats at any time, and
without any forewarning. No element or
topic presented in this brochure should be
intended as proof of the existence of any
form of association between the customer
and the official dealers. Official dealers do
not have the power to represent, draw up
contracts, extend warranties or bind the
boatyard in any way with regards third
parties.
ExteriorHull and deck
Accessories in AISI 316 or AISI 304 stainless
steel
Anchor 30kg and chain 40m in galvanized
steel (Ш 10mm)
VHF aerial
Legally approved audible alarm
Mid bitts in stainless steel (2)
Stern bitts in stainless steel (2)
Bow bitts in stainless steel (2)
Hatch with mosquito net and blind
Fender holder with steel edge
Fixed windows on bulwark in owner's cabin
and VIP cabin
Self-draining anchor locker
Hard Top in GRP with hard roof and
electrically opened stainless steel structure
Legally approved anchor lights and
navigation lights
Swinging bow roller for stainless steel anchor
Stainless steel portholes
Glass windscreen
Stainless steel stern chocks (2)
Stainless steel bow chocks (2)
Non-slip deck and side walkways
Glass-holder and object-holder
Stainless steel pulpit with stay
Stainless steel supports for lights, flag pole,
VHF aerial, audible alarm
Fuel refill vent with anti-flame and antispray
mesh protection
Fuel refill caps in chrome-plated brass (2)
Water refill cap in chrome-plated brass
Windscreen wipers with washer (2)
Stainless steel grabrails
Bow winch/chain pulley 1,500W with
control button
Cockpit / Upper saloon
Hatch for access to engine room
Aft gates in stainless steel and Plexiglas (2)
Shower head with hot/cold mixer tap in
swimming platform
Fixed window for lighting the dinette
(skylight)
Fixed window for lighting the owner's cabin
(skylight)
Afterpeak with access via doors, complete
with 24V socket and portable lamp
Courtesy LED lighting
Main lighting with flush-mounting LED
spotlights
Cockpit floor and bathroom platform in teak
Aft sunbed with transformable tilting
backrest
External hi-lo table in teak
220V socket
Shore water intake
Radio/CD with watertight loudspeakers (2)
Manual foldaway swimming ladder
Sliding companionway in gray Plexiglas with
lock
Stainless steel grabrails
Flush-mounting compartment with shore
power sockets 220V – 50Ah (2)
Three-panel door with curtain
Saloon floor in wood essence
“U”-shaped saloon sofa with locker for
housing life-raft
Fixed table in wood essence oppositesofa
Saloon cabinet in wood essence on
starboard side
READY-TO-INSTALL TENDER (to be
confirmed after sea trials):
- WORKING DIMENSIONS OF PLATFORM:
2.85 x 1.14m
- GARAGE: 1.47 x 2.40m
- HYPOTHETICAL PLATFORM TENDER: 2.85
x 1.14m - max. weight 200kg
- HYPOTHETICAL GARAGE TENDER: 1.47 x
2.40m - max. weight 100kg
- Garage designed to house a Suzuki XRB
2.4 loa
Wheelhouse
Footrest in teak, with locker
Remote control for extinguisher in the
engine room
Instrument board and control panel painted
with mat anti-glare finish
Extinguisher 1kg
12V socket
Dual-position helm seat with foldaway seat
Instruments:
- bilge alarms
- rudder angle
- Magnetic compass
- electronic engine controls
- analogue RPM indicator
- control of fire extinguishing system status
- trim tab position indicator
- watertight switches
- water tank level
- fuel tank level
- oil pressure gage
- emergency engine OFF button
- shore power socket connection indicator
light
- cooling water temperature
- tridata: echo sounder with alarm,
total/partial mileage counter, water
temperature
- voltmeter
- VHF/DSC with loudspeaker
Fixed power-assisted steering gear with steel
rudder wheel and leather-covered
Rim
InteriorLower saloon
Direct access to living area head
Sofa base in reconstituted “striped walnut”
veneer with lockers and drawer
Sofa covered in cotton
Extinguisher 1kg
Steps leading below deck in reconstituted
“striped walnut” veneer
Flush-mounting LED lighting
Light switches
Wall units for stowage
Stainless steel grabrails for ladder access
"L"-shaped galley
Extinguisher 1kg
Galley hood
Combined microwave/grill oven 220V
215-liter built-in fridge - 24V
Light switches
Stainless steel sink and mixer tap
Wall units, cupboards under worktop and
storage unit on bulwark
Ceramic glass range with 4 plates and pot
holder
Corian worktop
220V socket
Floor opposite galley in wood essence
Owner’s cabin
Wardrobes on bulwark with internal lighting
and mirrors on the panels (4)
Wardrobe / TV cabinet opposite bed
Nightstands with object-holder
compartment (2)
Extinguisher 1kg
Fixed windows on bulwark
Light switches
Double bed with mattress, bedspread and
pillows
Reading lights
Night-time lights
Cabinet with panels on bulwark (both sides)
Stainless steel portholes (2)
Wall unit on left-hand bulwark
220V sockets (3)
Mirror on stern bulkhead
Bed structure in GRP, with locker
eco-leather
Open compartments on the bulwarks
Owner's head
Separate shower enclosure in glass, with
seat and shelves
Teak grating
Light switches
Shower mixer tap with slide bar and tube
Cabinet with washbasin and mixer tap
Wall unit with mirrors
Corian top
220V socket
Complete head accessories set
Electric toilet system using fresh water
VIP cabin
Direct access to VIP / living area head
Wardrobes on bulwark, with mirror on the
panels (2)
Extinguisher 1kg
Fixed windows on the bulwark (2)
Light switches
Double bed with mattress, bedspread and
pillows
Reading lights
Night-time lights
Stainless steel portholes (2)
Wall units on the bulwark
220V socket
Bed structure in GRP, with drawers and
locker
eco-leather
VIP / living area head
Separate glass shower enclosure
Teak grating
Light switches
Shower mixer tap with slide bar and tube
Cabinet with washbasin and mixer tap
Corian top
Wall unit with mirrors
220V socket
Complete head accessories set
Electric toilet system using fresh water
SystemsElectric system
AGM generator battery 12V – 90Ah (1)
tel: +382.69.130.540
AGM engine batteries 12V – 90Ah (2)
AGM service batteries 12V - 200Ah (2)
Automatic battery charger 24V - 60A
Battery charger for generator 12V – 12A
Ventilated battery compartments
Electric battery cut-out controls in the
dinette
Service / engine parallel control in
wheelhouse
Switches for selecting shore or generator
power supply (2)
Digital control of the voltage and the current
absorption AC/DC
Visual control of input voltage polarity from
the shore
24V / 12V converter for 12V accessories
(VHF, audio system, cigarette lighter, etc.)
Mase generator 5 Kw – 50Hz
Galvanic current insulation system
Protection devices with circuit breaker on
generator and shore power socket lines
Water supply and bilge system
Bilge and engine room alarm, with visual and
sound indicator on the wheelhouse
30-liter water heater
By-pass for direct shore connection
Automatic pressure pump in the engine
room, with filter and shut-off valves on the
hot/cold water system for macroareas
Automatic electric bilge pump for internal
compartments (1)
Manual bilge pump for internal
compartments (1)
Manual bilge pump for engine rooms (1)
Special electric pump for intake of excess oil
and fuel (1)
Electric bilge pumps for engine room automatic and/or manual operation with
control in wheelhouse (1)
Automatic electric bilge pump for engine
room (1)
Fresh water tank (420 liters)
Gray water collection tanks (2 x 9 liters) with
electric drainage pump
By-pass valve for engine bilge emergency
intake
Fuel system
Solenoid valves on the feeder lines, to
immediately stop the fuel flow
Diesel settling filters (2)
Fuel tanks (2 x 850 liters) with visual
indicator
Engine room
Access hatch from cockpit
Overhead lighting with portable lamps
Automatic and manual fire extinguishing
system
Air extraction system activated via
differential thermostat
Thermal/acoustic insulation
Complete cathode protection
Access ladder in stainless steel, with nonskid
rungs
Submerged outlets
Safety valves on the seawater intakes
Propulsion system
Stainless steel propeller shafts Ш 60mm (2)
5-blade propellers (2)
Electro-hydraulic trim tabs (2)
Axis supports Ш 60mm (2)
Steel rudder (2)
Thru-hulls for axis Ш 60mm (2)
Equipment
1 hook for telescope
20 anchor lines
18 fender lines
1 safety system for anchor
6 fenders
6 black fender covers
1 Owner's Manual
2 float key-holders
1 bag (with logo) for storing the manuals
1 remote control holder (with logo)
1 bag for holding the shower tube
additional options
tel: +382.69.130.540

with small illustrations (size ~ 2 MB)

Transcription

Similar documents

Donzi 27 ZR - Azimut Yachts in Montenegro

kik-step®

Azimut 98 Leonardo

Guardian GLHL-SS GLHR-SS

Azimut 68S - Azimut Yachts in Montenegro

AZIMUT 86S - PB Yachting

Skate Deterrents