- Tilsatec

Transcription

- Tilsatec

2016
Hand and arm protection solutions
Engineered to provide extreme levels of performance and comfort
www.tilsatec-rhino.com
2
Tilsatec - Where It All Began
3
Tilsatec started life as a technical division of Sirdar Spinning Limited based in West Yorkshire, England. The company has been
on the same site since 1890 manufacturing yarns for a number of different applications.
With 135 years of experience there isn't a lot the company
doesn't know about yarn and textiles manufacturing, so it was a logical diversification to move into producing high performance technical
yarns for PPE. The Rhino proprietary yarn technology
was designed to deliver a step change in cut resistance performance in a cost effective hand protection solution. In 2006 Tilsatec was
awarded the Queen’s Awards for Enterprise in the Innovation
category for the successful development and commercialization of the Rhino yarn and subsequent range of hand and arm protection.
Tilsatec North America - Locations
Tilsatec serviced the US automotive and metal stamping
industries experiencing rapid growth in the early years. In 2008 Tilsatec North America was established in Ontario, Canada to offer North
American based sales support and distribution. In 2012
Tilsatec North America restructured its operations establishing a Headquarters in the USA and realigning the two regional distribution
centers in the US and Canada to offer customers a fast,
readily available inventory and prompt delivery service.
Eupora - A History of Glove Making
In 2015 Tilsatec North America acquired a dedicated manufacturing and
warehousing facility in Eupora, Mississippi. It made perfect sense for
Tilsatec to take this site on as it has a long and rich history of glove making.
Originally built in the 1940’s by Wells Lamont the factory has seen a lot of
gloves produced since that time and we intend to continue this legacy in the
next phase of Tilsatec’s growth and expansion. Part of this legacy is being
able to retain the skilled workers who have been at the site for many years
which is something we’re very proud to be able to do supporting the local
community.
1880
Spinning business
known as Harrap
Brothers, producing
wool yarns was
founded in West
Yorkshire, England.
1890
The business
transferred to
the current
site in West
Yorkshire,
England
where it has
been for 126
years.
1934
The plant has seen many changes since those days however and is now
a modern manufacturing facility able to produce a range of technical, high
performance PPE products. The new site is key in enabling the company to
manufacture more products in house and offer customers a different way
of specifying their PPE requirements. It is now possible to select from a
number of finishes and styling options such as cuff length and type, thumb
reinforcements, additional labelling and branding so your hand protection
is designed exactly the way your workforce need it.
1989
Brand name
Acquisition of
‘Sirdar’ meaning
Tilsa Yarns.
leader was
Manufacturing
adopted,
hosiery and
following Lord fashion yarns on
Kitchener’s
site in Wakefield.
appointment as
Sirdar of the
Egyptian Army.
2001
2002
2004
2006
Tilsatec
established
as a Technical
Division of
Sirdar PLC.
Technical yarn
and fabric
manufacturing
commenced.
Tilsatec Rhino®
brand created
to market
the range of cut
resistant hand
and arm
protection and
inherently FR
workwear.
First major
Tilsatec
customer
acquired in
the UK.
Tilsatec awarded
Queen’s Awards for
Enterprise,
Innovation category
for the successful
development and
commercialization
of the Tilsatec
Rhino yarn. Award
presented by HRH
Princess Anne.
2008
Tilsatec North
America
established
in Ontario,
Canada to
service the USA
and Canada.
2010
2012
2013
Launch of
Rhinoguard
range of
cut, puncture and
needlestick PPE
in Europe, USA
and Canada.
Restructuring of
Tilsatec North
America
operations. HQ
established in
USA and 2
distribution hubs
in US and
Canada.
Tilsatec North
America
established sales
representation
in Mexico.
2014
Launch of General
Purpose Hand
Protection range
in USA, Canada
and Mexico.
2015
Tilsatec
acquired new
manufacturing
and warehousing
facilites in Eupora,
MS.
2016
Tilsatec continues
expansion and
coverage in USA.
4
Rhino Yarn Technology
5
Cut and Sewn: All of the Tilsatec leather range and many of the Knuckleguard range are made from leather and
constructed in this way. Generally these are made from either a Keystone or Wing thumb cut pattern.
The unique Rhino steel core yarn forms the base of most Tilsatec cut resistant products. Developed using proprietary yarn
Bonded: The Cut-Chem™ range is constructed from a seamless knitted cut resistant gauntlet style glove which has a neoprene
technology in house, Rhino yarn delivers the highest levels of cut resistance, which is further enhanced with the addition of
layer bonded either to the outside or inside depending on the style.
high performance coatings or leather reinforcement to produce products that can protect in even the most demanding working
environments.
Coating Types / Finishes
As Tilsatec manufactures the Rhino yarn in house we are able to react quickly to market changes and customer requirements
developing bespoke high performance products to short lead times. It also allows us to ensure the highest levels of quality
control and testing at all stages of the manufacturing process and pass on all important cost savings to end users.
Glove Styles, Construction And Coatings
Cuff Types
Knitwrist
Gauntlet Cuff
Shirred Elastic Cuff
Expandable
Neoprene
Velcro Fastening
Nitrile (Flat or Foam)
Polyurethane (PU)
Natural Rubber Latex
Polyvinyl Chloride (PVC)
Tough and durable it offers high
Provides good dry grip and
Delivers high puncture
PVC dot patterns to the palm
abrasion resistance and oil grip.
dexterity, ideal for light
resistance and good for
provide enhanced grip.
Applications: auto industry,
weight gloves.
liquid protection and grip.
Applications: warehousing,
metal fabrication, engineering,
Applications: assembly,
Applications: waste handling,
paper industry, distribution,
oily applications.
small parts, material handling.
outdoors work, construction
general handling.
and glass manufacturing.
Sleeve Styles
Thumb Styles
Keystone: An inset thumb on full leather gloves. Keystone thumbs provide enhanced wearer comfort.
Straight: A thumb that usually falls straight with the index finger. This style is commonly seen in leather palm gloves.
Wing: A glove construction that positions the thumb diagonally across the palm. Wing thumbs are used on certain styles to
improve wearer comfort.
Reversible: A reversible style enables the glove to be worn on either hand (ambidextrous).
Glove Construction
Seamless Knitted: The majority of gloves in the Tilsatec Rhino and General Purpose Hand Protection ranges are a seamless
knitted liner constructed from our Rhino cut resistant yarn or a natural yarn fiber. Seamless knitting provides a better fit and
eliminates seams which can be uncomfortable for the wearer.
Dipped: All products in the coated range are seamless knitted liners which are dipped on a hand mold into a polymer
solution of either nitrile, polyurethane or latex. The polymer used will affect the level of abrasion, cut and puncture resistance the
glove offers.
Knitted Sleeves
Woven Sleeves
Rhinoguard™ Sleeves
Manufactured using Rhino proprietary yarn
Lightweight and breathable and
Constructed using our unique
technology in a seamless fitted design with
provides contact heat protection.
Rhinoguard™ fabric the TTP469
or without a thumb slot.
Styles can be available with
sleeve is designed to provide
optional fastenings and thumb slot.
flexibility and ease of movement
and can be wiped clean to extend
it's usable life.
6
ANSI/ISEA Standards
Cut Resistance
ANSI/ISEA 105: 2011
Two test methods are used for the determination of cut resistance:
ASTM F1790-97 - uses CPP test device
ASTM F1790-05 - uses CPP or TDM test device
The force required for material cut through using these methods is classified in the table below:
Weight (grams) needed to cut through material
(25 mm of blade travel - ASTM F1790-97)
(20 mm of blade travel - ASTM F1790-05)
Level
0
< 200
1
≥ 200
2
≥ 500
3
≥ 1000
4
≥ 1500
5
≥ 3500
7
European Standards
CE Marking System
The Personal Protective Equipment (PPE) Directive (89/686/EEC) is written to ensure all PPE meets common standards of quality and
performance and is categorized to enable safety professionals to match the PPE to the level of risk or hazard identified. Protective gloves
which are classified as PPE must be CE marked and comply with relevant EN standards (described below).
The PPE Directive specifies three classes of gloves for different levels of user risk; ‘minimal’, ‘intermediate’ and ‘mortal or irreversible’.
Simple design - minimal risk
Gloves which may be used in low risk situations such as gardening gloves or cleaning gloves. Manufacturers are permitted to
test and certify gloves themselves - gloves of simple design are CE marked as follows:
ANSI 105: 2011
4
Intermediate design - intermediate risk
Gloves which may be used to protect against intermediate risks such as mechanical protection gloves providing cut, puncture and abrasion
resistance, must be subjected to independent testing and certified by a notified body.
Only approved bodies may issue a CE mark, without which the gloves may not be sold. The name and address of the Notified Body must
appear on the instructions for use that accompany the gloves. Gloves of intermediate design are CE marked as follows:
CUT
ANSI/ISEA 105: 2016
A new revision to the standard was published in February 2016 with a new test method F2992-15. This method is similar to ASTM F1790-05 but
only specifies use of the TDM test device and requires a larger number of samples to be tested with a modification to the statistical interpretation
of results. The classification of cut resistance levels also changes and will now include 9 ANSI levels of cut protection. To enable customers to
understand and differentiate between the old and new ANSI cut levels a letter 'A' will be published in front of the new ANSI test results.
A comparison of the old ANSI levels to the new 2016 levels is shown in the table below:
CAT II
Complex design - irreversible or mortal risk
Gloves which are designed to protect against the highest level of risk e.g. chemicals, must be tested and certified by a Notified Body.
The quality assurance system used by the manufacturer to guarantee homogeneity of production must be independently checked. The body
carrying out this evaluation will be identified by a number which must appear alongside the CE mark. Gloves of complex design are CE marked
as follows:
0321
CAT III
ANSI 105: 2016
A5
CUT
Results obtained using the TDM test device according to ASTM F1790-05 (ANSI/ISEA 105: 2011) and ASTM F2992-15 (ANSI/ISEA 105: 2016)
are expected to be similar but are not a direct conversion.
Other Changes
ASTM F2878-10 - Hypodermic Needle Puncture Resistance
As of 2016 the ANSI/ISEA 105 standard has been updated to include this test which uses a 25 gauge needle to determine the force required for
a hypodermic needle to penetrate protective clothing/materials.
Level
Puncture (Newtons)
0
≤2
1
≥2
2
≥4
3
≥6
4
≥8
5
≥ 10
Note: The original PPE Directive 89/686/EEC has been amended by both the 93/95/EEC Directive and the CE marking Directives 93/68/EEC
and 95/58/EEC.
EN420: 2003 - General requirements for protective gloves
Defines the general requirements for most types of protective gloves which includes:
•
Glove construction
•
Ergonomy
•
Dexterity
•
Innocuousness
•
Product marking and packaging information
•
Sizing
•
Water vapor transmission and absorption
•
Electrostatic properties
Sizing of gloves according to hand length and circumference:
Glove Size
Hand Circumference (mm)
Hand Length (mm)
Min length of glove (mm)
6
152
160
220
7
178
171
230
8
203
182
240
9
229
192
250
10
254
204
260
11
279
215
270
This pictogram indicates that the user should always consult the instructions for use:
8
European Standards Continued
9
EN388: 2003 - Mechanical Protection
The Mechanical Risks pictogram is shown with four numbers, representing performance levels against a specific hazard test.
EN388: 2003
abcd
Performance Level
1
2
3
4
5
Abrasion Resistance (cycles)
100
500
2000
8000
n/a
Blade Cut Resistance (index)
1.2
2.5
5.0
10.0
20.0
Tear Resistance (newtons)
10
25
50
75
n/a
- To prevent charge build up and release in flammable atmospheric environments where there is a risk of incendiary discharge
- To avoid damage to sensitive electronic componentry during assembly processes
- To control the attraction of dust and other contaminants to critical pre-painted surfaces
Puncture Resistance (newtons)
20
60
100
150
n/a
Two different test methods exist for the characterization of antistatic performance according to EN 1149-5.
Under the 2003 standard, blade cut resistance is determined using a Coup test device and the number of cycles measured to produce a cut
through with a rotating circular blade and fixed load. To improve the accuracy and reliability of cut test data, CE certification bodies currently
recommend that when gloves providing high levels of cut resistance (EN388 level 4 and 5) are required, the ISO 13997 test should be
considered. This test is performed on a TDM machine and the cut index is calculated based on the force necessary to produce a 20mm cut
while a straight blade is moving across the fabric. The cut load is expressed in Newtons.
Performance Level
ISO 13997:1999 Cut Load (Newtons)
1
2
3
4
5
N/A
N/A
N/A
≥13
≥22
The TDM used in ISO 13997 is the same device as specified in ASTM F1790-05 and F2992-15 and results from all three methods should
be similar. The EN388 standard is currently under revision and a 2016 edition of the standard is expected later in the year. The revision will
incorporate a fifth letter to the pictogram to specify levels of cut resistance obtained using only the ISO 13997 method. The revised levels are
expected to harmonize with those in ANSI/ISEA 105: 2016.
In future, European test results will be displayed as shown below with a letter indicating the level achieved on the ISO 13997 test:
EN388: 2016
EN407: 2004 - Protection from Thermal Hazards
The heat and flame pictogram is shown with six numbers, representing performance levels against specific thermal hazard tests.
Performance Level
a. Burning behavior
b. Contact heat
abcdef
EN 1149-1: Test method for measurement of surface resistivity.
A specimen is placed on an insulating base plate and an electrode assembly placed on top. A Direct Current (DC) potential is applied and the
resistance of the fabric is measured. This test determines the resistance over a short distance and is most appropriate for materials for which
the electrostatic behaviour is based on surface conductivity. Materials must record < 2.5 x 10(9) ohms to meet the requirements of the standard.
EN 1149-3: Test method for measurement of charge decay.
A specimen is charged by an induction effect. The induced charge on the test material influences the field that is observed by a probe
positioned above the test surface. The decrease in field charge is used to determine the half decay time and the shielding factor of the material. A
half decay time of < 4 seconds or shielding factor of > 0.2 are required to meet the conditions of EN1149-5 using this test method.
EN374: 2004 - Protection from Chemicals
The Chemical pictogram is used for air and liquid proof gloves that have a breakthrough time > 30 mins for at least 3 chemicals from the
list below. A,K,L represents the code letters for 3 of these chemicals for which the glove obtained > 30 mins breakthrough time.
A - Methanol
B - Acetone
C - Acetonitrile
D - Dichloromethane
E - Carbon disulphide
F - Toluene
abcdE
EN407: 2004
EN1149 Antistatic
EN 1149-5: 2008 is a European Standard which specifies the performance and design requirements for electrostatic dissipative clothing, used
as part of an earthed clothing system to avoid the build up of static charges. There are a number of important applications where the use of
antistatic hand protection is of critical importance, such as:
1
2
3
G - Diethylamine
H - Tetrahydrofurane
I - Ethyl acetate
J - n-Heptane
K - Sodium hydroxide 40%
L - Sulphuric Acid 96%
EN374: 2004 - Protection from Micro-Organisms
The micro-organism pictogram is used when gloves pass the air and water penetration test and also comply with at least level 2
inspection levels (AQL <1.5).
4
After flame time
< 20 s
< 10 s
<3s
<2s
After glow time
no requir.
< 120 s
< 25 s
<5s
Contact temperature
100°c
250°c
350°c
500°c
Threshold time
> 15 s
> 15 s
> 15 s
> 15 s
c. Convective heat (heat transfer delay)
>4s
>7s
> 10 s
> 18 s
d. Radiant heat (heat transfer delay)
>7s
> 20 s
> 50 s
> 95 s
e. Small drops molten metal (# drops)
> 10
> 15
> 25
> 35
f. Large quantity molten metal (mass)
30g
60g
120g
200g
EN421: 2010 - Protection from radioactive contamination
The Radiation pictogram is used for gloves which comply with the air and water penetration test and which also meet minimum requirements for
mechanical protection according to EN388.
10
11
Industries
Across many industries there are jobs involving working with sharp hazards. At Tilsatec we understand that each industrial
sector will have a wide variety of performance attributes required from their hand and arm protection. The Rhino Range of gloves
and sleeves has been developed working with end users in automotive assembly, the glass industry, metal stamping and many
other sectors to create glove solutions that are right for the job. Use the key below to see which gloves are right for your industry.
Automotive /
Transportation
Manufacturing and assembly in the automotive and transportation industries present a
wide range of cut and puncture hazards. Be it body weld, metal stamping or general
handling, Tilsatec has developed products designed specifically for each of these areas.
Glass Industry
Workers in the glass industry need hand and arm protection that provides a high level of
cut resistance but which also provides good grip and safe handling to prevent product
damage. We understand these requirements and have solutions for many areas of
manufacture.
Metal Fabrication
Safety is key in the metal manufacturing and fabrication industry. Worker’s hands are
exposed to a number of hazards requiring cut resistance, puncture resistance, liquid
protection and heat protection. Comfort and grip are also paramount for maintaining
productivity and reducing costs from injuries.
Waste Management
Waste management and waste disposal is one of the fastest growing industrial sectors. It
presents many cut and puncture hazards as well as from fine grade needles. Typical
operations include waste collection and removal, recycling, sorting and landfill. Both Rhino
and RHINOGUARD have product solutions to suit many of these applications.
Building /
Construction
Construction sites both large and small can be dangerous places to be with so many cut
and puncture hazards. For applications such as masonry, carpentry, drywall, HVAC,
electrical and general labouring, Tilsatec Rhino has the hand and arm protection you need.
Utilities
The utilities sector can provide unique environments where high levels of protection are
required, but with the greatest amount of dexterity and sensitivity to carry out sometimes
delicate handling operations, be it handling blades, cables or pulling lines.
Oil & Gas /
Petrochemical
The Oil and Gas industry presents a unique and very specific set of hand protection
requirements. As well as cut and puncture hazards, workers face the risk of crushing and
impact to the hand all while needing excellent oil grip. There may also be chemicals
present which is why we have developed our new Cut-Chem™ range offering chemical,
cut and abrasion resistance in one.
Food Processing
The Anti-microbial Rhino™ range of cut resistant gloves has been developed specifically
for the food industry. Fully launderable without diminishing the antimicrobial properties,
the Blue Rhino™ Range is available in a choice of weights and styles suitable for use with
beef, pork, poultry and vegetable processing applications.
COATED Cut Resistant Gloves
p12 - 17
CORE Cut Resistant Gloves
p18 - 23
LEATHER Cut Resistant Gloves
p24 - 29
FOOD SAFE Cut Resistant Gloves
p30 - 33
CUT-CHEM™ Cut and Chemical Resistant Gloves
p34 - 37
ARM AND BODY PROTECTION
p38 - 43
RHINOGUARD™
p44 - 49
CR + KNUCKLEGUARD™
p50 - 53
KNUCKLEGUARD™
p54 - 57
GENERAL PURPOSE HAND PROTECTION
p58 - 61
12
13
12
The Rhino Range of lightweight, coated gloves delivers grip, comfort and dexterity
combined with cut resistance, liquid repellency and mechanical protection.
TTP029PU X-Lite™
TTP030PU Rhino-Lite™
TTP045NBR Ultralite™
TTP051L Flex 5L Grip Latex™
TTP060/PD1 Flex 5™ / Flex 5 PD1™
TTP060L Flex 5L™
TTP060NBR Flex 5NBR™
TTP065L Hi5 Latex™
14
14
15
15
16
16
17
17
15
TTP029PU - X-Lite™
TTP045NBR - Ultralite™
ANSI 105:2011
EN388:2003
ANSI 105: 2011
3
Cut 3 PU coated glove
CUT
EN388:2003
EN407:2004
4
NEW LOOK Light weight NBR coated glove
X4XX
The X-Lite™ has a 10 gauge seamless knitted, soft liner
designed to be extremely lightweight and dexterous. Providing
high levels of abrasion resistance the TTP029PU is ideal for use in
metal stamping, automotive assembly and other handling
environments. The robust polyurethane coating also provides
good dry grip.
The Ultralite™ is one of the thinnest, lightest ANSI Cut level 4 gloves on the
market. The ultra fine 15 gauge liner has a form fitting, ergonomic shape
making the glove feel incredibly light and comfortable. A breathable nitrile
foam palm coating provides good grip in both wet and dry environments, while
retaining a high degree of tactility and touch sensitivity. The Ultralite™ is ideal
for small assembly and handling of small parts.
Features & Benefits
•
ANSI cut level 3 (1000 - 1499 grams)
•
Lightweight, soft 10 gauge liner
•
Good level of abrasion resistance
Features & Benefits
•
•
Enhanced grip in wet and dry conditions
•
Fine 15 gauge liner provides second skin dexterity
•
High level of abrasion resistance
•
Breathable open back liner
Typical Handling Applications
•
Assembly / Automotive industry
•
White goods
•
Metal stamping
CUT
3542
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
CAT II
X1XXXX
•
Assembly
•
Automotive industry
•
Metal stamping
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP029PU
cut 3 PU coated glove
6 (Yellow), 7 (Red), 8 (Blue), 9 (White), 10
(Green), 11 (Grey), 12 (Brown)
12 pairs per bag, 144 pairs per case
TTP045PU
light weight NBR coated glove
6 (Yellow), 7 (Blue), 8 (Green), 9 (Red),
10 (Black), 11 (Brown)
TTP030PU - Rhino-Lite™
TTP051L - Flex 5L Grip Latex™
ANSI 105: 2011
4
CUT
Cut 4 PU coated glove
ANSI 105: 2011
EN388:2003
CUT
Fully dipped latex grip glove
The TTP030PU Rhino - Lite™ is one of our softest, most comfortable
gloves yet. Suitable for dry environments where protection and dexterity
are key, the seamless knitted liner provides a close fit for picking and
fitting small pieces/parts. The tough and durable grey polyurethane
palm coating provides high levels of cut resistance and abrasion
resistance making it also suitable for glass handling, automotive
and general assembly.
The Flex 5L Grip Latex™ is the all round cut resistant hand protection solution.
The seamless cut 5 liner on the inside delivers the mechanical protection, while
the outer gauntlet provides full liquid protection for use in all weathers. The latex
crinkle coating delivers outstanding grip in wet and dry conditions making it ideal
for construction, masonry and the renewables industry. Maximum levels of puncture
resistance, abrasion and cut resistance make the Flex 5L Grip Latex™ also suitable
for waste recycling, waste management, police and local authorities.
Features & Benefits
•
•
Superb comfort and dexterity
•
Outstanding dry grip
Features & Benefits
•
ANSI cut level 5 (>3500 grams)
•
Hard wearing, robust latex coating
•
Enhanced grip in wet and dry conditions
•
Fully waterproof for use outdoors
•
Assembly / Automotive industry
•
Metal stamping
•
White goods
EN407:2004
5
CAT II
3442
EN388:2003
CAT II
4544
X2XXXX
•
Construction / Lumber
•
Waste recycling / Waste management
•
Renewables industry
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP030PU
cut 4 PU coated glove
5 (Pink), 6 (Yellow), 7 (Red), 8 (Blue), 9 (White),
10 (Green), 11 (Grey), 12 (Brown)
TTP051L
fully dipped latex grip glove
8 (Blue), 9 (White), 10 (Green), 11 (Brown)
14
17
TTP060NBR - Flex 5NBR™
TTP060/PD1 Flex 5™ / Flex 5 PD1™
ANSI 105: 2011
EN388:2003
EN407:2004
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
4
CUT
Light weight liner glove / pvc dot palm
ANSI 105: 2011
EN407:2004
4
CAT II
X1XXXX
254X
EN388:2003
CUT
Flex 5NBR foam nitrile glove
The seamless knitted Flex 5™ provides level 4 cut resistance
in a seamless knitted liner with an elasticated cuff for a close
fit and high level of comfort and dexterity. Ideal as an under
glove used under a chemical resistant or disposable glove.
The Flex 5NBR™ is our seamless knitted 13 gauge providing high levels
of abrasion resistance with superb durability. A foam nitrile palm coating
repels oils and liquids which decreases irritation to the skin and keeps
hands clean. Along side high levels of protection the glove offers comfort,
dexterity and breathability in a light weight, seamless knitted liner.
Features & Benefits
•
•
High comfort and dexterity
•
Ideal as an under glove
Features & Benefits
•
•
Good grip in dry and slightly oily conditions
•
Excellent comfort and dexterity
•
Light assembly
•
General handling
•
White goods
•
Under glove with a disposable over
•
Automotive industry
•
Glass industry
•
Metal fabrication
•
Light assembly
•
General handling
4542
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP060/PD1
light weight liner glove / pvc dot
palm
TTP060NBR
flex 5NBR foam nitrile glove
10 (Black), 11 (Brown), 12 (White)
TTP065L - Hi5 Latex™
TTP060L - Flex 5L™
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
Flex 5L latex glove
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
The Flex 5L™ is our seamless 13 gauge glove with a wrinkled latex
coating to the palm and fingers. Combined with high cut resistance,
the latex wrinkle coating provides excellent grip in wet (water)
applications. Designed to maximise grip, the coating channels surface
liquid away to ensue safe handling even in the most tactile applications.
Additionally, the latex coating provides a good level of puncture
resistance for handling sheet materials and splintered pieces.
ANSI 105: 2011
EN388:2003
5
CAT II
CUT
High cut 5 hi-vis glove
3543
The Hi5 Latex™ represents Tilsatec’s next generation of cut resistant gloves.
Providing extreme cut protection the Hi5 Latex™ is one of the highest rated
ANSI cut level 5 coated gloves on the market. The glove exceeds ANSI level 5
cut performance, yet maintains high levels of comfort, dexterity and breathability.
In hi-vis orange the glove is deigned to be clearly visible from a distance
improving workplace safety.
Features & Benefits
•
•
ANSI level 4 puncture resistance
•
Superb grip and durability
•
Hi-vis orange allows the glove to be seen from a distance
Features & Benefits
•
•
Latex wrinkle coating to palm and fingers
•
Excellent grip in wet conditions
•
Construction
•
Lumber / Forestry
•
Waste management
•
Metal fabrication
•
Glass handling
•
Glass handling
•
Construction
•
Labouring
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP060L
flex 5L latex glove
TTP065L
high cut 5 hi-vis glove
10 (Black), 11 (Brown), 12 (White)
CAT II
COATED Cut
Resistant
Gloves
BESCHICHTETE
schnittfeste
Handschuhe
16
19
18
The Core Range delivers high levels of cut resistance with comfort and dexterity in a number of knit
styles and weights. This classic range continues to form the basis of many performance products
throughout the Rhino Range.
TTP080 Hybris™
TTP092 Avior™
TTP200/PD1 Katana™
TTP250 Eos™
TTP300 Alastor™
TTP350 Cronus™
TTP357HH Venus™
TTP900 Aether™
20
20
21
21
22
22
23
23
21
TTP080 - Hybris™
TTP200/PD1 - Katana™
Made in the USA
EN388:2003
ANSI 105: 2011
EN407:2004
4
254X
EN388:2003
ANSI 105: 2011
X1XXXX
EN407:2004
4
CAT II
CUT
Heavy weight ‘loop out’ glove
Made in the USA
Medium weight liner glove / with PVC dots to palm
The heavy weight ‘Terry Loop Out’ construction provides superb
strength and durability for heavy duty handling and production
applications, while still retaining excellent levels of comfort and
dexterity. An optional reinforced thumb crotch area provides
additional protection and support when handling larger,
heavyweight panels and sheet materials.
The seamless knitted Katana™ provides level 4 cut resistance
with an elasticated cuff for a close fit and high level of comfort
and dexterity for the user. A reinforced thumb crotch provides
additional protection in high action areas. The glove is also
available with a PVC dot pattern to the palm and fingers for
added control and grip.
Features & Benefits
•
•
Loop out construction for extra comfort
•
Reinforced thumb crotch
•
Ambidextrous
Features & Benefits
•
•
•
CUT
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
•
Automotive industry
•
Metal fabrication
•
Glass industry
•
Automotive industry
•
Metal fabrication
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP080
heavy weight loop out glove
7 (Blue), 8 (Green), 9 (Red), 10 (Black)
TTP200
medium weight liner glove
TTP092 - Avior™
TTP250 - Eos™
Made in the USA
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
Heavy weight ‘Loop In’ FR glove
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
41323X
Made in the USA
ANSI 105: 2011
EN407:2004
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
4
CAT II
CUT
Medium weight glove
The heavy weight ‘Terry Loop In’ cut and flame retardant glove
protects against molten metal droplets and weld spatter. A
reinforced thumb crotch provides additional protection and the
terry loop in structure provides additional support and cushioning.
Eos™ is a next generation medium weight glove designed for
general material handling. Providing ANSI level 4 cut protection
the glove offers good levels of abrasion resistance and durability.
A reinforced thumb crotch provides added protection for high
action areas.
Features & Benefits
•
•
High level of heat protection
•
Protection against weld spatter and molten metal
•
Ambidextrous
Features & Benefits
•
•
High level of heat protection
•
Protection against weld spatter and molten metal
•
Ambidextrous
•
Automotive stamping
•
Body shop
•
Assembly
•
Steel fabrication
•
Metal handling
•
Automotive industry
•
Metal fabrication
•
General handling
•
Assembly
X1XXXX
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP092
heavy weight loop in FR glove
9 (Red), 10 (Black)
TTP250
medium weight glove
CAT II
20
23
TTP300 - Alastor™
TTP357HH - Venus™
Made in the USA
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
Heavy weight glove
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
Made in the USA
ANSI 105: 2011
EN388:2003
EN407:2004
X5XX
X3XXXX
5
CAT II
CUT
High heat heavy weight glove
Alastor™ is a heavier weight version of our seamless
knitted Katana™ providing high level cut resistance and
a good level of comfort and dexterity, with the assurance
of a hard wearing, durable glove. A reinforced thumb
crotch provides additional protection in high action areas
and the glove is also available with a PVC dot to the palm
and fingers for added control.
Venus™ is a robust glove designed to deliver extreme levels of
cut resistance and heat protection. Providing high ANSI level 5
cut resistance in a heavy weight, dark, seamless knit Venus™
can withstand the toughest of applications.
Achieving EN407 contact heat level 3 the glove can deliver heat
protection up to 350˚c/662˚f for 19 seconds for hot handling
applications and hazards.
Features & Benefits
•
•
•
Reinforced thumb crotch area
Features & Benefits
•
•
7 gauge heavy weight knit
•
EN407 contact heat level 3 >350˚c (662F) for 15+ seconds
Typical Handling Application
•
Light assembly
•
General handling
•
Automotive industry
•
Glass industry
•
Automotive
•
Metal fabrication
•
Spot welding
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP300
heavy weight glove
TTP357HH
high heat heavy weight glove
7-8 (Blue), 9-10 (Black)
TTP350 - Cronus™
Made in the USA
ANSI 105: 2011
CUT
Made in the USA
ANSI 105: 2011
EN407:2004
5
Heavy weight cut 5 glove
TTP900 - Aether™
X1XXXX
Cronus™ is a next generation heavyweight glove designed
to perform under the toughest heavy-duty conditions.
Providing maximum ANSI level 5 cut protection and high
levels of abrasion resistance Cronus™ is ideal for metal
stamping, pressing, knife handling and large sheet material
handling.
EN388:2003
EN407:2004
4
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
CUT
High cut glove / with PVC dots
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
254X
X1XXXX
Aether™ is a seamless 7 gauge knit with excellent cut
and abrasion resistance. This combined with its
dexterity and comfort makes it a suitable glove for any
assembly, stamping, metal fabrication, glass handling or
material handling application.
Features & Benefits
•
•
7 gauge seamless knit
•
PVC dot pattern to palm and back of hand optional
Features & Benefits
•
•
7 gauge
•
Excellent abrasion resistance
•
Assembly stamping
•
Metal fabrication
•
Glass handling
•
Material handling
•
Automotive industry
•
Metal fabrication
•
Heavy-duty handling
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP350
heavy weight cut 5 glove
TTP900
high cut glove
22
25
The range of leather gloves is designed using our popular ANSI cut 4 light and medium weight
liners with a number of leather configurations and palm coverings to provide enhanced abrasion
resistance, grip and puncture protection.
TTP203 Phoenix™26
TTP204 Caldera™26
27
TTP205 Triton™
TTP208 Fitters™27
TTP215 Spatterguard™
28
TTP230WYH Hi-Vis Goatskin Drivers Glove
28
TTP231 Prometheus™
29
24
TTP205 - Triton™
TTP203 - Phoenix™
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
Phoenix leather glove
4543
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
ANSI 105: 2011
CUT
Oil repellent leather palm glove
Phoenix™ is our seamless knitted Katana™ liner providing level 4
cut resistance. A full grain goatskin leather outer provides good grip
and makes it an ideal drivers style glove. The wrist is full leather with
a shirred back for improved fit and control.
EN407:2004
4
CAT II
X1XXXX
EN388:2003
4543
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
CAT II
X1XXXX
Triton™ is our seamless knitted Katana™ providing high level
cut resistance with a leather palm for good wet and dry grip.
The reinforced thumb crotch provides additional protection for
handling sheet materials making it ideal for metal stamping and
glass handling and cutting.
Features & Benefits
•
•
•
Electric Arc Resistance:
•
ATPV rating of 37.5 cal/cm2
•
Full grain goatskin leather
•
Ideal as a driver’s glove
Features & Benefits
•
•
7 gauge knitted liner
•
Split grain leather palm and fingers
•
Good abrasion resistance and grip
•
General handling
•
Metal fabrication
•
Railroad
•
Transportation
•
Automotive industry
•
Metal stamping
•
Glass handling
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP203
goatskin leather glove
7 (Blue), 8 (Green), 9 (Red), 10 (Black),
11 (Brown), 12 (White), 13 (Grey)
TTP205
oil repellent leather glove
11 (Brown)
TTP204 Caldera™
TTP208 Fitters™
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
FR backed leather palm glove
4543
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
ANSI 105: 2011
EN388:2003
EN407:2004
4543
X1XXXX
4
CAT II
CUT
Split leather gauntlet
Caldera™ is our Katana™ knitted glove with fully leather-wrapped
forefinger and palm with a flame retardant backing. A great
combination of our cut resistant Rhino yarn, abrasion resistance,
quality leather grip and the flame resistance of the treated cotton
back makes this a great glove for welding, body shop work, metal
fabrication and stamping facilities with weld station.
The Fitters™ glove is our Katana™ liner with a quality split
leather out in a Fitter style glove, featuring a safety cuff with
a leather knuckle strap for added protection. Typical applications
include automotive assembly, metal stamping and fabrication,
lumber/forestry and most material handling applications.
Features & Benefits
•
•
•
Split grain leather / FR fabric back
•
Good abrasion resistance and grip
Features & Benefits
•
•
•
Split grain leather
•
Excellent abrasion and puncture resistance
•
Automotive industry
•
Metal stamping
•
Spot welding
•
Body shop
•
Construction
•
Lumber / Forestry
•
Metal stamping
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP204
FR backed leather glove
11 (Brown)
TTP208
split leather gauntlet
11 (Brown), 12 (White)
27
26
TTP215 - Spatterguard™
TTP231 - Prometheus™
ANSI 105: 2011
EN388:2003
EN407:2004
4
Light weight FR backed leather palm glove
CUT
4543
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
ANSI 105: 2011
X1XXXX
CUT
Cut resistant welding gauntlet
The Spatterguard™ is the next generation FR backed leather palm glove. Based
on the TTP060 Flex 5 liner a greater level of dexterity is achieved than usually
associated with cut level 5 leather palm gloves. The leather wrap to the palm and
fingers provides reinforced protection where needed most while still providing a
light, soft, comfortable glove suitable for long periods of wear.
EN407:2004
4543
X1XXXX
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
Prometheus™ is a gauntlet style leather glove designed
specifically for those who typically have to wear two different
styles of glove to perform different parts of their job.
Prometheus™ is a welding gauntlet which uniquely also provides
ANSI level 4 cut resistance and is available in sizes S - 4XL ensuring
a proper fitting glove.
Features & Benefits
•
•
Leather palm provides oil resistance and grip
•
Flame resistant fabric provides protection from weld
spatter to the back of the hand.
•
Leather vein guard provides extended protection to the
wrist.
No longer do workers have to switch between gloves to perform
cutting or welding tasks, Prometheus™ will protect for both.
Providing EN407: 2004 contact heat level 1 protection and reinforced
stitching between the palm and thumb for added durability, this is
no ordinary welding glove.
•
Automotive industry
•
Metal stamping
•
Spot welding
Code
Style
Sizes (cuff colors)
Packaging
TTP215
light weight FR backed leather palm
glove
8 (Green), 9 (Red), 10 (Black), 11 (Brown),
12 (White)
TTP230WYH - Hi-Vis Goatskin Drivers
ANSI 105: 2011
EN388:2003
4
CUT
Features & Benefits
•
•
EN407 level 1 contact heat protection
•
Gauntlet design for maximum protection
•
Reinforced stitching between the palm and thumb
for added durability
•
Ideal as a welding glove which also offers cut resistance
•
Welding
•
Metal stamping
•
Metal cutting
™
NEW Hi-vis goatskin drivers glove
4
CAT II
EN388:2003
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
XXX3
The TTP230WYH is a unique hand protection design. A driver's style glove with a
supple goatskin leather shell and full aramid seams, the TTP230WYH exceeds the
ANSI cut level 4 performance standard while maintaining extreme comfort,
breathability and dexterity.
Utilizing moisture-wicking yarn technology, the glove provides a cooling effect
keeping hands dry and comfortable for long periods of wear. The keystone thumb
design provides superb dexterity and the hi-vis fingertips and WATCH YOUR HANDS
safety message aid visibility and safety on site allowing hands to be seen.
Features & Benefits
•
•
•
Hi-vis orange fingertips for increased visibility
•
WATCH YOUR HANDS message in hi-vis to promote safety on site
•
Soft goatskin leather outer for a comfortable fit and palm grip
•
Construction
•
Lumber/Forestry
•
Engineering
Code
Style
Sizes (cuff colors)
Packaging
TTP230
hi-vis goatskin drivers glove
Code
Style
Sizes (cuff colors)
Packaging
TTP231
cut resistant welding gauntlet
6 (Pink), 7 (Blue), 8 (Green), 9 (Red), 10
(Black), 11 (Brown), 12 (White), 13 (Grey),
14 (Purple)
29
28
31
The Anti-microbial Rhino™ range of cut resistant food gloves are designed specifically
for the food industry. Fully launderable, the anti-microbial properties are engineered to
last the lifetime of the gloves and there is a weight and style to suit most food preparation
applications where cut resistance is required.
TTP405B Anti-microbial Rhino™32
TTP407B Anti-microbial Rhino Excel™32
TTP410B Anti-microbial Rhino Plus™33
TTP420B Anti-microbial Rhino™ Sleeve33
30
33
TTP405B - Anti-microbial Rhino™
ANSI 105: 2011
EN388:2003
EN407:2004
4
CUT
Light weight antimicrobial food glove
TTP410B - Anti-microbial Rhino Plus™
Made in the USA
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
ANSI 105: 2011
EN388:2003
EN407:2004
5
CAT II
X1XXXX
Made in the USA
CUT
Heavy weight antimicrobial food glove
254X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
CAT II
X1XXXX
Anti-microbial food gloves do not contain any glass materials
which may fibrillate and break off when in contact with food
stuffs. Anti-microbial gloves are suitable for contact with all
foodstuffs in compliance with FDA Regulations for materials
in contact with food.
Features & Benefits
•
•
Permanent anti-microbial component
•
May be washed at up to 92°c / 197°f
•
Color coded to prevent cross contamination
•
Extended cuff for added protection
Features & Benefits
•
•
•
•
•
•
Suitable for knife hand use
•
Meat carving and deboning
•
Fish packaging and processing
•
•
•
Food packaging and processing
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes (cuff colors)
Packaging
TTP405B
light weight antimicrobial food
handling glove
11 (Brown)
24 pieces per bag
TTP410B
heavy weight antimicrobial food
handling glove
11 (Brown)
24 pieces per bag
TTP407B - Anti-microbial Rhino Excel™
ANSI 105: 2011
EN388:2003
EN407:2004
5
CUT
Medium weight antimicrobial food glove
454X
TTP420B - Anti-microbial Rhino™ Sleeve
Made in the USA
X1XXXX
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
ANSI 105: 2011
EN388:2003
Made in the USA
EN407:2004
Anti-static
according to
EN1149-5:2008
CAT II
(EN1149-3: 2004)
4
CAT II
CUT
Lightweight antimicrobial food sleeve
254X
X1XXXX
Features & Benefits
•
•
•
•
•
Features & Benefits
•
•
•
•
Elasticized top to keep sleeve in place
•
To be worn in conjunction with a Blue Rhino glove
•
•
•
Fish processing and filleting
•
•
•
Fish processing
•
Code
Style
Sizes (cuff colors)
Packaging
Code
Style
Sizes
Packaging
TTP407B
medium weight antimicrobial food
handling glove
11 (Brown)
24 pieces per bag
TTP420B
light weight antimicrobial food sleeve
one size
100 pieces per case
32
35
CUT-CHEM™ Cut and chemical resistant gloves
The Cut-Chem™ range of neoprene gloves is designed for any industry that requires
cut and chemical protection, but they are particularly suitable for oil and gas, petrochemicals,
automotive, engineering and renewable industries.
Neoprene provides a broad spectrum of chemical protection for a wide range of applications
including chemical handling and transport, cleaning and de-greasing, handling alkalis, salts,
oils, acids, caustics, alcohols and other speciality chemicals.
TTP095 Cut-Chem™
TTP095HV Cut-Chem™ Hi-Vis
TTP095R Cut-Chem™ Reversed
36
37
37
CUT-CHEM™ Cut and Chemical Resistant Gloves
34
37
TTP095HV Cut-Chem™ Hi-Vis
TTP095 Cut-Chem™
ANSI 105: 2011
EN388:2003
EN407:2004
EN421: 2010
5
Black neoprene gauntlet
CUT
ANSI 105: 2011
EN4374: 2004 EN4374: 2004
X1XXXX
A,K,L
EN407:2004
EN421: 2010
EN4374: 2004 EN4374: 2004
5
CAT III
4542
EN388:2003
Hi-vis orange neoprene gauntlet
CUT
CAT III
4542
A,K,L
X1XXXX
The TTP095HV neoprene gauntlet is designed for use in applications where
liquid and chemical protection is the primary requirement rather than
protection from cuts and lacerations. The outer neoprene is in hi-vis orange
for when the wearer needs to be seen and is also food approved for use in
contact with all food groups.
Cut-Chem™ is an innovative new glove that delivers level 5 cut
resistance, level 4 puncture resistance and chemical and liquid protection
in one powerful solution. The neoprene outer provides protection against
a broad range of chemicals and is certified to EN374: 2004.
The black neoprene gauntlet is designed for use in applications where
liquid and chemical protection is the greater requirement than protection
from cuts and lacerations. Where cuts are the greater risk the reserved
neoprene TTP095R would be more suitable.
Features & Benefits
•
•
•
Protection from chemicals and micro-organisms
•
Liquid protection
•
Food approved
Features & Benefits
•
•
EN407 level 1 contact heat protection:
Time to pain threshold at: 100˚c/212˚F - 23 sec
250˚c/480˚F - 11 sec
•
Neoprene outer provides EN374 chemical protection
•
Protection from micro-organisms and radioactive
contamination
•
Steel core knitted liner provides cut and abrasion
resistance
•
Ideal for applications where cut and chemical
resistance are required
•
Oil & gas
•
Petrochemicals
•
Automotive and Engineering
•
Food industry
Code
Style
Sizes
Packaging
TTP095HV
hi-vis orange neoprene gauntlet
8 (Green), 9 (Red), 10 (Black), 11 (Brown),
12 (White)
TTP095R Cut-Chem™ Reversed
•
Oil & gas
•
Petrochemicals
•
Chemical handling and transport
•
Handling caustics and alcohol
•
Oils, acids and alkalis
ANSI 105: 2011
EN388:2003
EN407:2004
EN421: 2010
EN4374: 2004 EN4374: 2004
5
Reversed neoprene gauntlet
Code
Style
Sizes
Packaging
TTP095
black neoprene gauntlet
8 (Green), 9 (Red), 10 (Black), 11 (Brown)
CUT
CAT III
4542
X1XXXX
A,K,L
The reversed neoprene gauntlet is designed for use in applications where
cuts and lacerations are the primary risk. The external cut resistant knit
protects the chemical barrier from damage caused by the mechanical
hazards. Alternatively where chemicals are the greater risk the black
neoprene gauntlet TTP095 would be more suitable.
Features & Benefits
•
•
•
Protection from chemicals and micro-organisms
•
Protection from radioactive contamination
•
High cut and abrasion resistant outer
•
Oil & gas
•
Metal fabrication
•
Automotive and Engineering
•
Renewable industries
Code
Style
Sizes
Packaging
TTP095R
reversed neoprene gauntlet
8 (Green), 9 (Red), 10 (Black), 11 (Brown)
CUT-CHEM CutCut
CUT-CHEM™
and
and
chemical
Chemical
resistant
Resistant
gloves
Gloves
36
38
ARM AND BODY Protection
39
Many industrial applications such as metal stamping and glass handling require additional protection
to the wrist, arm and torso. The Rhino range incorporates several solutions in various lengths and
styles to protect all of these areas and keep workers safe.
CRS Xcalibur™
TTP810 - 824 Orion™
TTP125 Trident™
TTP840 Tec | Cool 4™
TTP850 Hemera™
TTP880SP/DP Sarpedon™
40
41
42
42
43
43
41
CRS - Xcalibur™
TTP810/814/816/818/821/824 - Orion™
ANSI 105: 2011
EN388:2003
4
CUT
Cut resistant sweatshirt
ANSI 105: 2011
EN407:2004
4
CAT II
254X
EN388:2003
Made in the USA
Tubular sleeve with thumb slot in various lengths
CUT
153X
Anti-static
according to
EN1149-5:2008
(EN1149-3: 2004)
X1XXXX
The seamless knitted Orion™ sleeve provides ANSI level 4
cut protection in a variety of lengths to suit a number of
different applications.
The elasticated tubular shape is designed to hold it's shape
even after long periods of wear.
The smooth finish provides enhanced wearer comfort
and ease of movement and a thumb slot gives a secure
fit to keep the sleeve in place.
Features & Benefits
•
•
Seamless knit with a smooth finish
•
Optional thumb slot for a secure fit
•
Elasticated tubular shape to keep in place
•
Available in various lengths
•
Glass handling
•
Automotive industry
•
Metal handling
•
White goods
The advanced garment design of the Xcalibur™ sweatshirt is developed using the latest in cutting edge manufacturing
techniques. The soft and lightweight fabric has a ‘cool to the touch feel’ and the inclusion of under arm vents ensures
maximum wearer comfort. The sweatshirt is also fully washable at up to 60°c / 140°f without impairment to the cut
resistant properties.
Features & Benefits
•
•
Seamless construction for ease of movement
•
Full body and arm protection
•
Cool touch, light weight fabric is comfortable to wear
•
High neck design allows safe handling of sheet materials
•
Thumb slot to prevent sleeves riding up in use
•
Underarm vents for enhanced breathability
•
Easy care - may be washed and dried at up to 60°c
•
Automotive industry
•
Metal fabrication
•
Glass industry
•
Handling raw glass
•
Cutting stations
•
Glass toughening
Size
To Fit Chest
Fitting and Sizing
•
This garment/product has a built in ease allowance to allow it to
be worn over light layers of clothing.
•
A larger size may be required if worn over heavy duty clothing.
•
Fit according to chest size.
Length
S
86CM / 34"
73CM
M
92CM / 36”
74CM
L
102CM / 40”
75CM
XL
112CM / 44”
75CM
2XL
122CM / 48”
76CM
3XL
132CM / 52"
79CM
4XL
142CM / 56"
80CM
5XL
152CM / 60"
83CM
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
CRS
xcalibur cut 4 sweatshirt
S, M, L, XL, 2XL, 3XL, 4XL, 5XL
Packed per piece
TTP810 / 814 / 816 / 818
/ 821 / 824
tubular knitted sleeve with
thumb slot
10 inch, 14 inch, 16 inch,
18 inch, 21 inch, 24 inch
Packed per piece, 100 pieces per
case
CAT II
40
42
TTP125 - Trident™
TTP850 - Hemera™
Made in the USA
ANSI 105:2011
2
CUT
FR woven sleeve
EN388:2003
Made in the USA
EN407:2004
ANSI 105: 2011
X1XXXX
EN388:2003
EN407:2004
X5XX
2XXXXX
4
CAT II
153X
43
CUT
20” Knitted loose fit FR sleeve
The Hemera™ loose fitting sleeve provides ANSI level 4 cut
resistance and EN407 level 2 burning behavior. The light weight
construction provides enhanced wearer comfort and flexibility
in warm environments. A comfortable double width elasticized
top allows the sleeve to fit all sizes, while maintaining it's shape
and not stretching over time. A thumb hole gives a secure fit and
prevents the sleeve from riding up the arm.
Trident™ is a light weight woven sleeve with a flame retardant fabric
providing mechanical and thermal protection. The sleeve is ideal for
general applications requiring cut resistance and is ideal for use in
welding operations.
Features & Benefits
•
ANSI cut level 2 (500 - 999)
•
Light, loose and comfortable
•
Inherently flame resistant
•
Velcro fastening for adjustable secure fit
•
Thumb slot to keep sleeve in place
Features & Benefits
•
•
Lightweight blousy sleeve
•
Inherently flame retardant
•
Loose fitting for use in warm environments
•
Thumb slot for a secure fit
•
Automotive industry
•
Metal fabrication
•
Welding
•
Glass handling
•
Automotive industry
•
Metal fabrication
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP125
flame retardant sleeve
one size - 20"/50cm sleeve with 4"/10cm cuff
packed per piece, 50 pieces per case
TTP850
knitted loose fit FR sleeve
one size - 20”/50cm
TTP840 Tec | Cool 4™
Made in the USA
ANSI 105: 2011
TTP880SP/DP - Sarpedon™
Made in the USA
EN388:2003
EN388:2003
EN407:2004
153X
X1XXXX
4
CUT
Cut 4 cool touch sleeve
X4XX
Single ply ANSI cut 4 / Double ply ANSI cut 5 sleeve
The TTP840 sleeve is a light weight cool to the touch sleeve which
is breathable and comfortable to wear for long periods. A unique
built in elastic area to the top of the arm prevents the sleeve from
falling down without the need for additional clips or velcro and a
thumb slot keeps the sleeve securely in place.
The Sarpedon™ is a tubular knitted sleeve available as a single
layer ANSI cut 4 or double layer ANSI cut 5. A combination of
comfort and a high degree of cut resistance with a thumb slot for
a secure fit Sarpedon™ is an excellent form of arm protection for
automotive, assembly, metal fabrication, stamping, glass handling,
packaging and any material handling application.
Features & Benefits
•
•
Soft, cool touch feel
•
Lightweight and breathable
•
Thumb slot to keep sleeve in place
•
Unique built in elastic prevents sleeve falling down
Features & Benefits
•
Single Ply: ANSI cut level 4 (1500 - 3499 grams)
•
Double Ply: ANSI cut level 5 (>3500 grams)
•
Tubular elasticized knit stays in place
•
Thumbhole for secure fit
ANSI 105: 2011
4
CUT
ANSI 105: 2011
5
CUT
•
Automotive
•
Metal stamping
•
Packaging
•
Material handling
•
Metal stamping
•
Glass handling
•
Material fabrication
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP840
cut 4 cool touch sleeve
22’ Small (Blue), 22” Medium (Green),
22” Large (Red)
packed per piece, 100 pieces per
case
TTP880SP
TTP880DP
single ply cut 4 sleeve
double ply cut 5 sleeve
12”, 14”, 18”, 20”, 24”
RHINOGUARD™
45
44
Extreme Cut & Puncture Protection
RHINOGUARD™ cut, puncture, needlestick range
RHINOGUARD™ is an exciting new fabric technology developed by Tilsatec. Designed to provide
cut resistance, puncture and needlestick protection in one lightweight, flexible fabric composite, the
technology has been incorporated into this new range of RHINOGUARD™ hand and arm protection products.
TTP450 Rhinoguard™ Mechanics Glove
TTP452 Rhinoguard™ Extrication Glove
TTP455 Rhinoguard™ Extrication Glove
TTP459 Rhinoguard™ Arm Guard
TTP469 Rhinoguard™ Long Sleeve
TTP470 Rhinoguard™ Apron
46
47
48
49
49
49
47
TTP450 - Rhinoguard™ Mechanics Glove
TTP452 - Rhinoguard™ Extrication Glove
ANSI 105: 2016
ANSI 105: 2011
2
5
PUNCTURE
CUT
EN388:2003
CAT II
4544
ANSI 105: 2016
ANSI 105: 2011
2
5
PUNCTURE
CUT
EN388:2003
CAT II
4544
ANSI Level 5 cut resistance with Rhinoguard™
ANSI 105:2016 Level 2 puncture and needlestick
protection
ANSI Level 4 cut resistance only
RHINOGUARD™ is a highly engineered textile composite primarily designed to provide the highest levels of protection against
a wide range of puncture hazards. The material is constructed from an innovative combination of advanced fibres, modified
fabric structure and a unique coating technology to deliver high levels of protection against both large and small puncture
threats (including needles and syringes).
Uniquely for a puncture resistant material, RHINOGUARD™ also provides protection against cuts, heat and flame, abrasion
and liquids. All of this is achieved in a light weight, thin and flexible material which can be employed in a range of demanding
environments.
environments.
The RHINOGUARD™ MECHANICS delivers cut, abrasion, puncture and needle resistance for extreme working conditions.
The puncture protection areas with RHINOGUARD™ inside include the palm, fingers and fingertips. A light weight
cut resistant liner provides additional cut protection in all areas of the glove.
The RHINOGUARD™ MECHANICS GLOVE delivers cut, abrasion, puncture and needle resistance for extreme working conditions.
•
Emergency Services:
Police, Fire Fighters, Search and Rescue
•
Metal forming and handling
•
Glass processing and handling
•
Security
•
Local Authorities
Features & Benefits
•
•
ASTM F1342-05: 86 Newtons of puncture resistance
•
ASTM F2878-10: 5.7 Newtons using 25g sharpened medical
grade needle
•
Light weight cut resistant liner
•
Leather reinforcement to palm for high action areas
•
Emergency Services:
•
•
Oil and gas
Features & Benefits
•
•
•
ASTM F2878-10: 5.7 Newtons using 25g sharpened medical
grade needle
•
Coated black palm with reinforced stitching provides enhanced
dry grip and abrasion resistance
•
Liquid protection
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP450
mechanics glove
7,8,9,10,11,12,13
1 pair per bag, 36 pairs per case
TTP452
extrication glove
7,8,9,10,11,12,13
RHINOGUARD™
46
TTP455 - Rhinoguard™ Extrication Glove
ANSI 105: 2016
ANSI 105: 2011
2
5
PUNCTURE
CUT
TTP459 - Rhinoguard™ Arm Guard
TTP469 - Rhinoguard™ Sleeve
ANSI 105: 2016
EN388:2003
2
4
PUNCTURE
CUT
CAT II
4544
ANSI Level 5 cut resistance with Rhinoguard™
ANSI 105:2016 Level 2 puncture and needlestick
protection
ANSI Level 4 cut resistance only
ANSI 105: 2011
EN388:2003
EN407:2004
4444
X1XXXX
The ARM GUARD provides all the performance of RHINOGUARD™
in a simple yet effective forearm protection design. With robust velcro
fastening the arm guard stays firmly in place when in use, can be
adjusted for a secure fit and allows for quick and easy removal.
The 19" SLEEVE is designed with a robust double width velcro
fastening strip at the wrist for a secure fit, is shaped around the
elbow in an ergonomic, comfortable design so it does not limit
movement in the arm.
Both styles can be wiped clean, making them easy to maintain
and care for, while it also helps to prolong the serviceable life of
the sleeve.
•
Waste handling / Recycling
•
environments.
The RHINOGUARD™ Extrication delivers cut, abrasion, puncture and needle resistance for extreme working conditions.
•
Emergency Services:
•
•
Glass processing and handling
•
Security
•
Local Authorities
Features & Benefits
•
•
•
ASTM F2878-10: 5.7 Newtons using 25g sharpened
medical grade needle
•
Leather palm which softens over time with a pvc dot
pattern to provide wet/oil grip
Features & Benefits
•
•
•
Code
Style
Sizes
Packaging
TTP459
TTP469
arm guard with velcro fastening
full sleeve with velcro fastening
9” / 22cm
19" / 48cm
Packed per piece, 100 pieces per case
Packed per piece, 64 pieces per case
TTP470 - Rhinoguard™ Apron
ANSI 105: 2016
ANSI 105: 2011
2
4
PUNCTURE
CUT
The RHINOGUARD™ apron is made of our unique RHINOGUARD™ material which provides
chest, abdomen and leg protection where puncture and cut resistance is needed. The RHINOGUARD™
apron provides excellent protection for many industries including metal fabrication and stamping.
Features & Benefits
•
•
•
•
Waste handling / Recycling
•
Frontal
Apron Size
Actual Apron
Size
Fits Dress
Size
Fits Suit
Size
Max Chest/Hip
Measurement
Fits Max Height
Small
20” x 32”
4-6
34 - 36
36”
5’6”
Medium
22” x 34”
8 - 10
38 - 40
40”
5’10”
Large
24” x 36”
12 - 14
42 - 44
44”
6’0”
X-Large
26” x 38”
16 - 18
46 - 48
48”
6’2”
XX_Large
28” x 40”
20 - 22
50 - 52
52”
6’4”
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP455
rhinoguard extrication glove
7,8,9,10,11,12,13
TTP470
rhinoguard apron
Available in various sizes. Contact your
representative for details.
Packed per piece
EN388:2003
EN407:2004
4444
X1XXXX
RHINOGUARD™
49
48
™
™
CR ++ KG
KNUCKLEGUARD
CR
50
51
CR + KG™
CR + KG is a new range combining the high levels of Tilsatec Rhino® cut resistance with the
powerful, unique Knuckleguard™ TPR impact protection. With a number of style variations the
range has been designed following extensive work with end users in the oil & gas and petrochemical
industries to deliver maximum protection in a flexible, cost effective and all around hand protection solution.
TTP090 AV-N-KG / TTP090SNF-KG CR+KG
TTP091 CR+KG 3/4 Dip
TTP233KG CR+KG Hi-Vis
CR200KG-WP - CR+KG-WP
52
52
53
53
TTP090 - CR+KG
53
ANSI 105: 2011
EN388:2003
4
CUT
TTP233KG - CR+KG Hi-Vis
EN407:2004
ANSI 105: 2011
EN407:2004
4542
X1XXXX
5
CAT II
4542
EN388:2003
CUT
X1XXXX
CR+Knucklguard™ impact glove
CR+Knuckleguard™ hi-vis glove
The mechanics glove has a lightweight seamless knitted liner
providing ANSI level 4 cut resistance with high levels of dexterity.
The sandy foam nitrile palm provides superb grip in wet and oily
conditions, combined with a reinforced thumb crotch delivers high
abrasion resistance. Hi-vis TPR rubber pads to the back of the fingers
and knuckles provide impact protection without compromising dexterity.
The TTP233KG is designed in a drivers style glove with a soft goatskin
leather outer. Hi-vis orange TPR and leather palm reinforcements combined
with the safety message 'Watch Your Hands' promote increased visibility
on site. A 13gg liner provides ANSI level 5 cut resistance and double layer
leather in high action areas prolongs wear and abrasion resistance and
enhances the palm grip.
Features & Benefits
•
•
13 gauge lightweight seamless knit
•
Sandy foam nitrile palm coating
•
Knuckleguard™ TPR impact pads
Features & Benefits
•
•
Hi-vis Knuckleguard™ TPR impact pads
•
'Watch Your Hands' safety message promotes visibility
•
Soft goatskin leather outer in a drivers style glove
•
Double layer leather palm area with reinforced stitching
•
Oil and gas industry
•
Construction
•
Metal fabrication
•
•
Construction
•
Site maintenance / Engineering
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP090
CR+KG impact glove
8 (Green), 9 (Red), 10 (Black),
TTP233KG
CR+KG hi-vis glove
11 (Brown), 12 (White), 13 (Grey), 14 (Purple)
TTP091 - CR+KG 3/4 Dip
ANSI 105: 2011
EN388:2003
CR200KG-WP - CR+KG-WP
ANSI 105: 2011
5
4
CUT
CUT
4544
CR+Knuckleguard™ 3/4 dip impact glove
CR+Knuckleguard™ waterproof glove
A 3/4 dip version of the TTP090, the glove has a 13gg lightweight
seamless knitted liner providing ANSI level 4 cut resistance with high
levels of dexterity. The 3/4 dip sandy foam nitrile coating provides
superb grip in wet and oily conditions and high abrasion resistance.
High-vis TPR rubber pads to the back of the fingers and knuckles
provide impact protection without compromising the dexterity.
The CR200KG-WP consists of a highly engineered multi-layer
textile system. A level 5 cut resistant fabric to the palm
combined with grip coated reinforcement areas provides
mechanical protection and grip without compromising dexterity.
A full water, oil and wind proof membrane inside ensures hands
stay clean and dry and the unique KNUCKLEGUARD™ TPR
pads protect the back of the hand from impact hazards.
Features & Benefits
•
•
ANSI puncture level 5 (≥150 Newtons)
•
3/4 dip sandy foam nitrile provides superb grip
•
•
ANSI Cut level 5 (palm only)
Full Hipora water/oil/wind proof bladder
Features & Benefits
•
•
•
Fully water, oil and wind resistant
•
Reinforced grip
•
Oil & gas industry
•
•
•
Emergency services
•
•
•
Metal fabrication
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
TTP091
CR+KG 3/4 dip impact
glove
CR200KG-WP
CR+KG waterproof glove
7,8,9,10,11,12,13
CR + KNUCKLEGUARD™
52
55
GP100KG
ANSI 105: 2011
2
CUT
Knuckleguard™ mechanics glove
The GP100KG incorporates the Knuckleguard™ TPR impact pads in a
black mechanics style glove. Hi-vis flashes to the TPR allow hands to still
be seen, while the black neoprene cuff and spandex outer hides dirt. A
grip coated leather palm provides superb grip for when using hand tools
or operating machinery.
Features & Benefits
•
•
Foam impact pad to protect the whole knuckle area
•
Unique pull tab for quick pulling on and off
•
Leather palm enhances grip and abrasion resistance
•
Reinforced stitching increases durability
KNUCKLEGUARD™
The General Purpose KNUCKLEGUARD™ range has a unique TPR design providing impact protection
to the back of the fingers, thumb and hand with a padded foam impact pad to the knuckle area ensuring
all key areas are covered.
GP100KG
GP101KG
GP102KG
GP103KG
GP104KG
GP3000SNF-KG
55
55
56
56
57
57
KNUCKLEGUARD™
54
•
Oil & gas industry
•
Site maintenance
•
•
Emergency services
Code
Style
Sizes
Packaging
GP100KG
knuckleguard mechanics
7,8,9,10,11,12,13
GP101KG
ANSI 105: 2011
2
CUT
Knuckleguard™ mechanics hi-vis glove
The GP101KG is designed with a hi-vis yellow outer to allow hands
to be seen more easily on site with complimenting hi-vis flashes to the
TPR pads. The same hard wearing coated leather palm as the GP100KG
is also incorporated to give that same abrasion resistance and grip.
Features & Benefits
•
•
•
Hi-vis yellow outer to increase visibility
•
Unique pull tab for quick pulling on and off
•
Leather palm enhances grip and abrasion resistance
•
Oil & gas industry
•
Site maintenance
•
•
Emergency services
Code
Style
Sizes
Packaging
GP101KG
hi-vis glove
7,8,9,10,11,12,13
General Purpose Hand Protection
56
GP102KG
GP104KG
Knuckleguard™ mechanics dot palm glove
Knuckleguard™ drivers glove
The GP102KG incorporates the Knuckleguard™ TPR impact pads
in a similar black mechanics style glove to the original GP100KG but
with a soft leather palm and silicon dot pattern to provide superb oil
and wet grip. The leather palm softens with use for a comfortable fit.
The GP104KG is a drivers style glove incorporating the same Knuckleguard
TPR impact pads making it a versatile and robust yet soft, comfortable glove.
The supple goatskin leather outer repels oil and liquids while a double
reinforced matt leather palm area provides a non slip dry grip and increased
abrasion resistance.
Features & Benefits
•
•
Leather palm which softens and gives with wear
•
Unique pull tab for quick and easy pulling on and off
•
Silicone dot pattern to palm enhances grip
Features & Benefits
•
•
Soft, comfortable goatskin leather outer
•
Coated leather palm enhances grip and abrasion
•
Double layer leather reinforcement to centre of palm
•
•
Site maintenance
•
•
Emergency services
•
•
Site maintenance
•
•
Emergency services
KNUCKLEGUARD™
57
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
GP102KG
dot palm glove
7,8,9,10,11,12,13
GP104KG
knuckleguard drivers glove
7,8,9,10,11,12,13
GP103KG
GP3000SNF-KG
Knuckleguard™ mechanics hi-vis dot palm glove
Knuckleguard™ palm coated glove
The GP103KG is a hi-vis yellow option on the GP102KG.
Incorporating the same Knuckleguard™ TPR impact pads to the
knuckle area, back of hand and fingers the glove also has the soft
leather palm option with silicon dot pattern to provide superb oil
and wet grip.
The GP3000SNF-KG provides all the high quality design, fit, comfort
and breathability you’d expect in our Tilsatec Rhino range but in a
lightweight general purpose glove. The sandy finish foam nitrile palm
coating provides good wet grip and a reinforced thumb crotch gives
added wear and abrasion resistance. Hi-vis TPR rubber pads to the
back of the fingers and knuckles provide impact protection
without compromising dexterity.
Features & Benefits
•
•
Hi-vis yellow outer to increase visibility
•
Unique pull tab for quick and easy pulling on and off
•
Silicone dotted leather palm enhances wet/oily grip
Features & Benefits
•
TPR pads provide impact protection to fingers and knuckles
•
Foam nitrile palm coating enhances wet grip
•
Reinforced thumb crotch gives added abrasion resistance
•
Comfortable and breathable design
•
•
Site maintenance
•
•
Emergency services
•
Construction
•
General labor
•
Assembly work
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
GP103KG
hi-vis dot palm glove
7,8,9,10,11,12,13
GP3000SNF-KG
knuckleguard palm coated
glove
7,8,9,10,11,12,13
59
GENERAL PURPOSE
58
GENERAL PURPOSE Hand Protection
The General Purpose range of hand protection has been designed to provide the same high quality design, fit,
comfort and breathability you'd expect in our Tilsatec Rhino range, but in a light weight general purpose glove
where high cut resistance isn't required
GP2000PU De-Tach™
GP2001NBR - GP-Lite™
GP2001PU
GP2002L
60
60
61
61
61
GP2000PU - De | Tach™
EN388:2003
GP2001PU
EN388:2003
2121
4131
Light weight PU palm coated glove
The GP2001PU provides all the high quality design, fit, comfort and
breathability you’d expect in our Tilsatec Rhino range but in a
lightweight general purpose glove. The polyurethane palm coating
provides good grip and durability. Ideal for use in construction,
general labor and assembly work or any environments requiring
low level mechanical protection.
Features & Benefits
•
Superb grip and durability
•
Lightweight and comfortable
•
Highly breathable
De | Tach™ is an innovative concept in hand protection constructed
with built in break points on the fingers to limit tool wrap or pull into
machinery or rotating tools. If a glove were to be trapped within the
moving part, the finger ends of the glove will detach and break away
minimizing the risk of injury. A polyurethane palm coating provides
good grip, durability and protection making the De-Tach™ an all round
versatile glove.
Features & Benefits
•
Detachable finger ends prevent hands from being pulled
into moving machinery
•
Excellent grip and durability
GENERAL PURPOSE
60
•
•
Site maintenance
•
Engineering
•
•
Emergency services: Police, Fire Fighters,
Search and Rescue
•
Assembly
•
Hand tool operation
•
Automotive industry
•
Paper mill
•
Workshop environment
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
GP2000PU
PU palm coated De-Tach
glove
6 (Yellow), 8 (Green), 9 (Red), 10
(Black), 11 (Brown)
GP2001PU
light weight PU palm
coated glove
GP2001NBR - GP-Lite™
EN388:2003
GP2002L
EN388:2003
4131
4131
Light weight foam nitrile palm coated glove
Latex palm coated glove
The GP-Lite™ provides all the high quality design, fit, comfort and
breathability you’d expect in our Tilsatec Rhino range, but in a
lightweight general purpose glove. The foam nitrile palm coating
provides good wet grip while still allowing the hand to breathe. Ideal
for use in construction, general labor and assembly work or any
environments requiring low level mechanical protection.
The GP2002L provides all the high quality design, fit comfort and
breathability you’d expect in our Tilsatec Rhino range but in a
lightweight general purpose glove. The crinkle latex palm coating
provides good grip and durability. Ideal for use in construction, general
labouring and assembly work or any environments requiring low level
mechanical protection.
Features & Benefits
•
Good wet grip
•
Breathable open back allowing for long periods of wear
•
Lightweight and comfortable
Features & Benefits
•
Robust latex coating
•
Excellent grip and durability
•
Breathable open back
•
Assembly and general handling
•
Automotive industry
•
White goods
•
Paper mill
•
•
General handling
•
Automotive industry
•
Construction
•
Code
Style
Sizes
Packaging
Code
Style
Sizes
Packaging
GP2001NBR
light weight foam nitrile
palm coated glove
GP2002L
latex palm coated glove
62
63
Glove Sizing Chart
Get In Touch
Tilsatec gloves are available in a range of sizes. To ensure optimum fit and comfort, selecting the correct
size glove is essential. Measure your hand against the chart below to see what size glove you need.
To arrange a site survey or a visit from one of our Area Representatives you can fill in the enquiry form on the contact
page of the website:
14
13
12
Place your right hand
on the chart, the red line
should sit between your
thumb and index finger.
To speak to our Sales Department or
request a visit in the USA:
Phone Toll Free: 1-877-466-8499
Customer Service: Option 2
Enquiry Email: information@tilsatec-rhino.com
Canada
Phone Toll Free: 1-866-960-9454
Enquiry Email: info@tilsatec.net
Customer Service: customerservice@tilsatec.net
Mexico:
Enquiry Email: info-mex@tilsatec-rhino.com
Sizes are identified by the following cuff colors:
Size
5 XX-Small
6 X-Small
7 Small
8 Medium
9 Large
10 X-L
11 XX-L
12 XXX-L
13 XXXX-L
14 5X-L
Colour coded cuff
Isolated legacy styles may follow a varying colour code for cuff. Please consult the individual spec sheet or catalogue page.
To enquire about orders and deliveries:
Customer Service: customerservice@tilsatec-rhino.com
Phone: 1-877-466-8499 - Option 2
Tilsatec, UNITED STATES Office
2985 East Roane Avenue, Eupora, MS 39744
Phone Toll Free: 1-877-466-8499 Email: information@tilsatec-rhino.com Web: www.tilsatec-rhino.com

- Tilsatec

Transcription

Similar documents

636HRL Jomac Bakers Glove

rubber insulating gloves - Protective Industrial Products

95782G Storm Trooper

Discover the True Advantage

Zanier Sports Overview

Mehndi Art Gloves - Blick Art Materials

SAFETY TERMS GLOVE CONSTRUCTION TERMS

glove onstruction